blob: 5f23b911e8e3509b9ec25397b501f58771ea8391 [file] [log] [blame]
/* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/interrupt-controller/irq.h>
&spmi_bus {
qcom,pm660@0 {
compatible ="qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <2>;
#size-cells = <0>;
pm660_revid: qcom,revid@100 {
compatible = "qcom,qpnp-revid";
reg = <0x100 0x100>;
qcom,fab-id-valid;
};
pm660_misc: qcom,misc@900 {
compatible = "qcom,qpnp-misc";
reg = <0x900 0x100>;
};
qcom,power-on@800 {
compatible = "qcom,qpnp-power-on";
reg = <0x800 0x100>;
interrupts = <0x0 0x8 0x0 IRQ_TYPE_NONE>,
<0x0 0x8 0x1 IRQ_TYPE_NONE>,
<0x0 0x8 0x4 IRQ_TYPE_NONE>,
<0x0 0x8 0x5 IRQ_TYPE_NONE>;
interrupt-names = "kpdpwr", "resin",
"resin-bark", "kpdpwr-resin-bark";
qcom,pon-dbc-delay = <15625>;
qcom,kpdpwr-sw-debounce;
qcom,system-reset;
qcom,store-hard-reset-reason;
qcom,pon_1 {
qcom,pon-type = <0>;
qcom,pull-up = <1>;
linux,code = <116>;
};
qcom,pon_2 {
qcom,pon-type = <1>;
qcom,pull-up = <1>;
linux,code = <114>;
};
};
qcom,temp-alarm@2400 {
compatible = "qcom,qpnp-temp-alarm";
reg = <0x2400 0x100>;
interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
label = "pm660_tz";
qcom,channel-num = <6>;
qcom,temp_alarm-vadc = <&pm660_vadc>;
};
pm660_gpios: gpios {
compatible = "qcom,qpnp-pin";
gpio-controller;
#gpio-cells = <2>;
#address-cells = <1>;
#size-cells = <1>;
label = "pm660-gpio";
gpio@c000 {
reg = <0xc000 0x100>;
qcom,pin-num = <1>;
status = "disabled";
};
gpio@c100 {
reg = <0xc100 0x100>;
qcom,pin-num = <2>;
status = "disabled";
};
gpio@c200 {
reg = <0xc200 0x100>;
qcom,pin-num = <3>;
status = "disabled";
};
gpio@c300 {
reg = <0xc300 0x100>;
qcom,pin-num = <4>;
status = "disabled";
};
gpio@c400 {
reg = <0xc400 0x100>;
qcom,pin-num = <5>;
status = "disabled";
};
gpio@c500 {
reg = <0xc500 0x100>;
qcom,pin-num = <6>;
status = "disabled";
};
gpio@c600 {
reg = <0xc600 0x100>;
qcom,pin-num = <7>;
status = "disabled";
};
gpio@c700 {
reg = <0xc700 0x100>;
qcom,pin-num = <8>;
status = "disabled";
};
gpio@c800 {
reg = <0xc800 0x100>;
qcom,pin-num = <9>;
status = "disabled";
};
gpio@c900 {
reg = <0xc900 0x100>;
qcom,pin-num = <10>;
status = "disabled";
};
gpio@ca00 {
reg = <0xca00 0x100>;
qcom,pin-num = <11>;
status = "disabled";
};
gpio@cb00 {
reg = <0xcb00 0x100>;
qcom,pin-num = <12>;
status = "disabled";
};
gpio@cc00 {
reg = <0xcc00 0x100>;
qcom,pin-num = <13>;
status = "disabled";
};
};
pm660_coincell: qcom,coincell@2800 {
compatible = "qcom,qpnp-coincell";
reg = <0x2800 0x100>;
};
pm660_rtc: qcom,pm660_rtc {
compatible = "qcom,qpnp-rtc";
#address-cells = <1>;
#size-cells = <1>;
qcom,qpnp-rtc-write = <0>;
qcom,qpnp-rtc-alarm-pwrup = <0>;
qcom,pm660_rtc_rw@6000 {
reg = <0x6000 0x100>;
};
qcom,pm660_rtc_alarm@6100 {
reg = <0x6100 0x100>;
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
};
};
pm660_vadc: vadc@3100 {
compatible = "qcom,qpnp-vadc-hc";
reg = <0x3100 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "eoc-int-en-set";
qcom,adc-bit-resolution = <15>;
qcom,adc-vdd-reference = <1875>;
chan@6 {
label = "die_temp";
reg = <6>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "absolute";
qcom,scale-function = <3>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
qcom,cal-val = <0>;
};
chan@0 {
label = "ref_gnd";
reg = <0>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
qcom,cal-val = <0>;
};
chan@1 {
label = "ref_1250v";
reg = <1>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
qcom,cal-val = <0>;
};
chan@83 {
label = "vph_pwr";
reg = <0x83>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <1>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
chan@85 {
label = "vcoin";
reg = <0x85>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <1>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
chan@4c {
label = "xo_therm";
reg = <0x4c>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <4>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
chan@4d {
label = "msm_therm";
reg = <0x4d>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
chan@51 {
label = "quiet_therm";
reg = <0x51>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
chan@4e {
label = "emmc_therm";
reg = <0x4e>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
qcom,vadc-thermal-node;
};
chan@4f {
label = "pa_therm0";
reg = <0x4f>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
qcom,vadc-thermal-node;
};
chan@1d {
label = "drax_temp";
reg = <0x1d>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "absolute";
qcom,scale-function = <3>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
qcom,cal-val = <0>;
};
};
pm660_charger: qcom,qpnp-smb2 {
compatible = "qcom,qpnp-smb2";
#address-cells = <1>;
#size-cells = <1>;
qcom,pmic-revid = <&pm660_revid>;
io-channels = <&pm660_rradc 8>,
<&pm660_rradc 10>,
<&pm660_rradc 3>,
<&pm660_rradc 4>;
io-channel-names = "charger_temp",
"charger_temp_max",
"usbin_i",
"usbin_v";
qcom,wipower-max-uw = <5000000>;
/* Enable after the qusb_phy0 device node is added */
/* dpdm-supply = <&qusb_phy0>; */
qcom,thermal-mitigation
= <3000000 2500000 2000000 1500000
1000000 500000>;
qcom,chgr@1000 {
reg = <0x1000 0x100>;
interrupts =
<0x0 0x10 0x0 IRQ_TYPE_EDGE_RISING>,
<0x0 0x10 0x1 IRQ_TYPE_EDGE_RISING>,
<0x0 0x10 0x2 IRQ_TYPE_EDGE_RISING>,
<0x0 0x10 0x3 IRQ_TYPE_EDGE_RISING>,
<0x0 0x10 0x4 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "chg-error",
"chg-state-change",
"step-chg-state-change",
"step-chg-soc-update-fail",
"step-chg-soc-update-request";
};
qcom,otg@1100 {
reg = <0x1100 0x100>;
interrupts = <0x0 0x11 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x11 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x11 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x11 0x3 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "otg-fail",
"otg-overcurrent",
"otg-oc-dis-sw-sts",
"testmode-change-detect";
};
qcom,bat-if@1200 {
reg = <0x1200 0x100>;
interrupts =
<0x0 0x12 0x0 IRQ_TYPE_EDGE_RISING>,
<0x0 0x12 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x12 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x12 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x12 0x5 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "bat-temp",
"bat-ocp",
"bat-ov",
"bat-low",
"bat-therm-or-id-missing",
"bat-terminal-missing";
};
qcom,usb-chgpth@1300 {
reg = <0x1300 0x100>;
interrupts =
<0x0 0x13 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x13 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x13 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x13 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x13 0x5 IRQ_TYPE_EDGE_RISING>,
<0x0 0x13 0x6 IRQ_TYPE_EDGE_RISING>,
<0x0 0x13 0x7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "usbin-collapse",
"usbin-lt-3p6v",
"usbin-uv",
"usbin-ov",
"usbin-plugin",
"usbin-src-change",
"usbin-icl-change",
"type-c-change";
};
qcom,dc-chgpth@1400 {
reg = <0x1400 0x100>;
interrupts =
<0x0 0x14 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x14 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x14 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x14 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x14 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x14 0x5 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x14 0x6 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "dcin-collapse",
"dcin-lt-3p6v",
"dcin-uv",
"dcin-ov",
"dcin-plugin",
"div2-en-dg",
"dcin-icl-change";
};
qcom,chgr-misc@1600 {
reg = <0x1600 0x100>;
interrupts =
<0x0 0x16 0x0 IRQ_TYPE_EDGE_RISING>,
<0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
<0x0 0x16 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x16 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x16 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x16 0x5 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x16 0x6 IRQ_TYPE_EDGE_FALLING>,
<0x0 0x16 0x7 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "wdog-snarl",
"wdog-bark",
"aicl-fail",
"aicl-done",
"high-duty-cycle",
"input-current-limiting",
"temperature-change",
"switcher-power-ok";
};
};
pm660_pdphy: qcom,usb-pdphy@1700 {
compatible = "qcom,qpnp-pdphy";
reg = <0x1700 0x100>;
vdd-pdphy-supply = <&pm660l_l7>;
vbus-supply = <&smb2_vbus>;
vconn-supply = <&smb2_vconn>;
interrupts = <0x0 0x17 0x0 IRQ_TYPE_EDGE_RISING>,
<0x0 0x17 0x1 IRQ_TYPE_EDGE_RISING>,
<0x0 0x17 0x2 IRQ_TYPE_EDGE_RISING>,
<0x0 0x17 0x3 IRQ_TYPE_EDGE_RISING>,
<0x0 0x17 0x4 IRQ_TYPE_EDGE_RISING>,
<0x0 0x17 0x5 IRQ_TYPE_EDGE_RISING>,
<0x0 0x17 0x6 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "sig-tx",
"sig-rx",
"msg-tx",
"msg-rx",
"msg-tx-failed",
"msg-tx-discarded",
"msg-rx-discarded";
qcom,default-sink-caps = <5000 3000>, /* 5V @ 3A */
<9000 3000>; /* 9V @ 3A */
};
pm660_adc_tm: vadc@3400 {
compatible = "qcom,qpnp-adc-tm-hc";
reg = <0x3400 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "eoc-int-en-set";
qcom,adc-bit-resolution = <15>;
qcom,adc-vdd-reference = <1875>;
qcom,adc_tm-vadc = <&pm660_vadc>;
qcom,decimation = <0>;
qcom,fast-avg-setup = <0>;
#thermal-sensor-cells = <1>;
chan@83 {
label = "vph_pwr";
reg = <0x83>;
qcom,pre-div-channel-scaling = <1>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,btm-channel-number = <0x60>;
};
chan@4d {
label = "msm_therm";
reg = <0x4d>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x68>;
qcom,thermal-node;
};
chan@51 {
label = "quiet_therm";
reg = <0x51>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x70>;
qcom,thermal-node;
};
chan@4c {
label = "xo_therm";
reg = <0x4c>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <4>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x78>;
qcom,thermal-node;
};
chan@4e {
label = "emmc_therm";
reg = <0x4e>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x80>;
qcom,vadc-thermal-node;
};
chan@4f {
label = "pa_therm0";
reg = <0x4f>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x88>;
qcom,vadc-thermal-node;
};
};
pm660_rradc: rradc@4500 {
compatible = "qcom,rradc";
reg = <0x4500 0x100>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
qcom,pmic-revid = <&pm660_revid>;
};
pm660_fg: qpnp,fg {
compatible = "qcom,fg-gen3";
#address-cells = <1>;
#size-cells = <1>;
qcom,pmic-revid = <&pm660_revid>;
io-channels = <&pm660_rradc 0>,
<&pm660_rradc 7>;
io-channel-names = "rradc_batt_id",
"rradc_die_temp";
qcom,rradc-base = <0x4500>;
qcom,fg-esr-timer-awake = <96 96>;
qcom,fg-esr-timer-asleep = <256 256>;
qcom,fg-esr-timer-charging = <0 96>;
qcom,cycle-counter-en;
status = "okay";
qcom,fg-batt-soc@4000 {
status = "okay";
reg = <0x4000 0x100>;
interrupts = <0x0 0x40 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x40 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x40 0x2
IRQ_TYPE_EDGE_RISING>,
<0x0 0x40 0x3
IRQ_TYPE_EDGE_RISING>,
<0x0 0x40 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x40 0x5
IRQ_TYPE_EDGE_RISING>,
<0x0 0x40 0x6 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x40 0x7 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "soc-update",
"soc-ready",
"bsoc-delta",
"msoc-delta",
"msoc-low",
"msoc-empty",
"msoc-high",
"msoc-full";
};
qcom,fg-batt-info@4100 {
status = "okay";
reg = <0x4100 0x100>;
interrupts = <0x0 0x41 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x41 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x41 0x2 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x41 0x3 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x41 0x6 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "vbatt-pred-delta",
"vbatt-low",
"esr-delta",
"batt-missing",
"batt-temp-delta";
};
qcom,fg-memif@4400 {
status = "okay";
reg = <0x4400 0x100>;
interrupts = <0x0 0x44 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x44 0x1 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x44 0x2 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "ima-rdy",
"mem-xcp",
"dma-grant";
};
};
bcl@4200 {
compatible = "qcom,msm-bcl-lmh";
reg = <0x4200 0xff>,
<0x4300 0xff>;
reg-names = "fg_user_adc",
"fg_lmh";
interrupts = <0x0 0x42 0x0 IRQ_TYPE_NONE>,
<0x0 0x42 0x2 IRQ_TYPE_NONE>;
interrupt-names = "bcl-high-ibat-int",
"bcl-low-vbat-int";
qcom,vbat-polling-delay-ms = <100>;
qcom,ibat-polling-delay-ms = <100>;
};
};
qcom,pm660@1 {
compatible ="qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <2>;
#size-cells = <0>;
pm660_haptics: qcom,haptics@c000 {
compatible = "qcom,qpnp-haptics";
reg = <0xc000 0x100>;
interrupts = <0x1 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>,
<0x1 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hap-sc-irq", "hap-play-irq";
qcom,pmic-revid = <&pm660_revid>;
qcom,pmic-misc = <&pm660_misc>;
qcom,misc-clk-trim-error-reg = <0xf3>;
qcom,actuator-type = <0>;
qcom,play-mode = "direct";
qcom,vmax-mv = <3200>;
qcom,ilim-ma = <800>;
qcom,sc-dbc-cycles = <8>;
qcom,wave-play-rate-us = <6667>;
qcom,en-brake;
qcom,lra-high-z = "opt0";
qcom,lra-auto-res-mode = "qwd";
qcom,lra-res-cal-period = <4>;
};
};
};
&thermal_zones {
xo-therm-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm660_adc_tm 0x4c>;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
msm-therm-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm660_adc_tm 0x4d>;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
emmc-therm-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm660_adc_tm 0x4e>;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
pa-therm0-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm660_adc_tm 0x4f>;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
quiet-therm-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm660_adc_tm 0x51>;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};