diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index ea638b1..0721e78 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -11,29 +11,28 @@
  * See the file COPYING in this distribution for more information.
  *
  * Credits:
- * Jeff Garzik		: For pointing out the improper error condition 
- *			  check in the s2io_xmit routine and also some 
- * 			  issues in the Tx watch dog function. Also for
- *			  patiently answering all those innumerable 
+ * Jeff Garzik		: For pointing out the improper error condition
+ *			  check in the s2io_xmit routine and also some
+ *			  issues in the Tx watch dog function. Also for
+ *			  patiently answering all those innumerable
  *			  questions regaring the 2.6 porting issues.
  * Stephen Hemminger	: Providing proper 2.6 porting mechanism for some
  *			  macros available only in 2.6 Kernel.
- * Francois Romieu	: For pointing out all code part that were 
+ * Francois Romieu	: For pointing out all code part that were
  *			  deprecated and also styling related comments.
- * Grant Grundler	: For helping me get rid of some Architecture 
+ * Grant Grundler	: For helping me get rid of some Architecture
  *			  dependent code.
  * Christopher Hellwig	: Some more 2.6 specific issues in the driver.
- *			  	
+ *
  * The module loadable parameters that are supported by the driver and a brief
  * explaination of all the variables.
- * rx_ring_num : This can be used to program the number of receive rings used 
- * in the driver.  					
- * rx_ring_len: This defines the number of descriptors each ring can have. This 
+ * rx_ring_num : This can be used to program the number of receive rings used
+ * in the driver.
+ * rx_ring_len: This defines the number of descriptors each ring can have. This
  * is also an array of size 8.
  * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
- * tx_fifo_len: This too is an array of 8. Each element defines the number of 
+ * tx_fifo_len: This too is an array of 8. Each element defines the number of
  * Tx descriptors that can be associated with each corresponding FIFO.
- * in PCI Configuration space.
  ************************************************************************/
 
 #include <linux/config.h>
@@ -57,19 +56,19 @@
 #include <linux/version.h>
 #include <linux/workqueue.h>
 
-#include <asm/io.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
+#include <asm/io.h>
 
 /* local include */
 #include "s2io.h"
 #include "s2io-regs.h"
 
 /* S2io Driver name & version. */
-static char s2io_driver_name[] = "s2io";
-static char s2io_driver_version[] = "Version 1.7.7.1";
+static char s2io_driver_name[] = "Neterion";
+static char s2io_driver_version[] = "Version 1.7.7";
 
-/* 
+/*
  * Cards with following subsystem_id have a link state indication
  * problem, 600B, 600C, 600D, 640B, 640C and 640D.
  * macro below identifies these cards given the subsystem_id.
@@ -86,9 +85,13 @@
 static inline int rx_buffer_level(nic_t * sp, int rxb_size, int ring)
 {
 	int level = 0;
-	if ((sp->pkt_cnt[ring] - rxb_size) > 16) {
+	mac_info_t *mac_control;
+
+	mac_control = &sp->mac_control;
+	if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16) {
 		level = LOW;
-		if ((sp->pkt_cnt[ring] - rxb_size) < MAX_RXDS_PER_BLOCK) {
+		if ((mac_control->rings[ring].pkt_cnt - rxb_size) <
+				MAX_RXDS_PER_BLOCK) {
 			level = PANIC;
 		}
 	}
@@ -153,8 +156,7 @@
 #define S2IO_TEST_LEN	sizeof(s2io_gstrings) / ETH_GSTRING_LEN
 #define S2IO_STRINGS_LEN	S2IO_TEST_LEN * ETH_GSTRING_LEN
 
-
-/* 
+/*
  * Constants to be programmed into the Xena's registers, to configure
  * the XAUI.
  */
@@ -196,8 +198,7 @@
 	END_SIGN
 };
 
-
-/* 
+/*
  * Constants for Fixing the MacAddress problem seen mostly on
  * Alpha machines.
  */
@@ -227,6 +228,8 @@
 static unsigned int rx_ring_sz[MAX_RX_RINGS] =
     {[0 ...(MAX_RX_RINGS - 1)] = 0 };
 static unsigned int Stats_refresh_time = 4;
+static unsigned int rts_frm_len[MAX_RX_RINGS] =
+    {[0 ...(MAX_RX_RINGS - 1)] = 0 };
 static unsigned int rmac_pause_time = 65535;
 static unsigned int mc_pause_threshold_q0q3 = 187;
 static unsigned int mc_pause_threshold_q4q7 = 187;
@@ -237,9 +240,9 @@
 static unsigned int indicate_max_pkts;
 #endif
 
-/* 
+/*
  * S2IO device table.
- * This table lists all the devices that this driver supports. 
+ * This table lists all the devices that this driver supports.
  */
 static struct pci_device_id s2io_tbl[] __devinitdata = {
 	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
@@ -247,9 +250,9 @@
 	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
 	 PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
-	 PCI_ANY_ID, PCI_ANY_ID},
-	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
-	 PCI_ANY_ID, PCI_ANY_ID},
+         PCI_ANY_ID, PCI_ANY_ID},
+        {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
+         PCI_ANY_ID, PCI_ANY_ID},
 	{0,}
 };
 
@@ -268,8 +271,8 @@
 /**
  * init_shared_mem - Allocation and Initialization of Memory
  * @nic: Device private variable.
- * Description: The function allocates all the memory areas shared 
- * between the NIC and the driver. This includes Tx descriptors, 
+ * Description: The function allocates all the memory areas shared
+ * between the NIC and the driver. This includes Tx descriptors,
  * Rx descriptors and the statistics block.
  */
 
@@ -279,11 +282,11 @@
 	void *tmp_v_addr, *tmp_v_addr_next;
 	dma_addr_t tmp_p_addr, tmp_p_addr_next;
 	RxD_block_t *pre_rxd_blk = NULL;
-	int i, j, blk_cnt;
+	int i, j, blk_cnt, rx_sz, tx_sz;
 	int lst_size, lst_per_page;
 	struct net_device *dev = nic->dev;
 #ifdef CONFIG_2BUFF_MODE
-	unsigned long tmp;
+	u64 tmp;
 	buffAdd_t *ba;
 #endif
 
@@ -308,28 +311,34 @@
 	}
 
 	lst_size = (sizeof(TxD_t) * config->max_txds);
+	tx_sz = lst_size * size;
 	lst_per_page = PAGE_SIZE / lst_size;
 
 	for (i = 0; i < config->tx_fifo_num; i++) {
 		int fifo_len = config->tx_cfg[i].fifo_len;
 		int list_holder_size = fifo_len * sizeof(list_info_hold_t);
-		nic->list_info[i] = kmalloc(list_holder_size, GFP_KERNEL);
-		if (!nic->list_info[i]) {
+		mac_control->fifos[i].list_info = kmalloc(list_holder_size,
+							  GFP_KERNEL);
+		if (!mac_control->fifos[i].list_info) {
 			DBG_PRINT(ERR_DBG,
 				  "Malloc failed for list_info\n");
 			return -ENOMEM;
 		}
-		memset(nic->list_info[i], 0, list_holder_size);
+		memset(mac_control->fifos[i].list_info, 0, list_holder_size);
 	}
 	for (i = 0; i < config->tx_fifo_num; i++) {
 		int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
 						lst_per_page);
-		mac_control->tx_curr_put_info[i].offset = 0;
-		mac_control->tx_curr_put_info[i].fifo_len =
+		mac_control->fifos[i].tx_curr_put_info.offset = 0;
+		mac_control->fifos[i].tx_curr_put_info.fifo_len =
 		    config->tx_cfg[i].fifo_len - 1;
-		mac_control->tx_curr_get_info[i].offset = 0;
-		mac_control->tx_curr_get_info[i].fifo_len =
+		mac_control->fifos[i].tx_curr_get_info.offset = 0;
+		mac_control->fifos[i].tx_curr_get_info.fifo_len =
 		    config->tx_cfg[i].fifo_len - 1;
+		mac_control->fifos[i].fifo_no = i;
+		mac_control->fifos[i].nic = nic;
+		mac_control->fifos[i].max_txds = MAX_SKB_FRAGS;
+
 		for (j = 0; j < page_num; j++) {
 			int k = 0;
 			dma_addr_t tmp_p;
@@ -345,16 +354,15 @@
 			while (k < lst_per_page) {
 				int l = (j * lst_per_page) + k;
 				if (l == config->tx_cfg[i].fifo_len)
-					goto end_txd_alloc;
-				nic->list_info[i][l].list_virt_addr =
+					break;
+				mac_control->fifos[i].list_info[l].list_virt_addr =
 				    tmp_v + (k * lst_size);
-				nic->list_info[i][l].list_phy_addr =
+				mac_control->fifos[i].list_info[l].list_phy_addr =
 				    tmp_p + (k * lst_size);
 				k++;
 			}
 		}
 	}
-      end_txd_alloc:
 
 	/* Allocation and initialization of RXDs in Rings */
 	size = 0;
@@ -367,21 +375,26 @@
 			return FAILURE;
 		}
 		size += config->rx_cfg[i].num_rxd;
-		nic->block_count[i] =
+		mac_control->rings[i].block_count =
 		    config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
-		nic->pkt_cnt[i] =
-		    config->rx_cfg[i].num_rxd - nic->block_count[i];
+		mac_control->rings[i].pkt_cnt =
+		    config->rx_cfg[i].num_rxd - mac_control->rings[i].block_count;
 	}
+	size = (size * (sizeof(RxD_t)));
+	rx_sz = size;
 
 	for (i = 0; i < config->rx_ring_num; i++) {
-		mac_control->rx_curr_get_info[i].block_index = 0;
-		mac_control->rx_curr_get_info[i].offset = 0;
-		mac_control->rx_curr_get_info[i].ring_len =
+		mac_control->rings[i].rx_curr_get_info.block_index = 0;
+		mac_control->rings[i].rx_curr_get_info.offset = 0;
+		mac_control->rings[i].rx_curr_get_info.ring_len =
 		    config->rx_cfg[i].num_rxd - 1;
-		mac_control->rx_curr_put_info[i].block_index = 0;
-		mac_control->rx_curr_put_info[i].offset = 0;
-		mac_control->rx_curr_put_info[i].ring_len =
+		mac_control->rings[i].rx_curr_put_info.block_index = 0;
+		mac_control->rings[i].rx_curr_put_info.offset = 0;
+		mac_control->rings[i].rx_curr_put_info.ring_len =
 		    config->rx_cfg[i].num_rxd - 1;
+		mac_control->rings[i].nic = nic;
+		mac_control->rings[i].ring_no = i;
+
 		blk_cnt =
 		    config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
 		/*  Allocating all the Rx blocks */
@@ -395,32 +408,36 @@
 							  &tmp_p_addr);
 			if (tmp_v_addr == NULL) {
 				/*
-				 * In case of failure, free_shared_mem() 
-				 * is called, which should free any 
-				 * memory that was alloced till the 
+				 * In case of failure, free_shared_mem()
+				 * is called, which should free any
+				 * memory that was alloced till the
 				 * failure happened.
 				 */
-				nic->rx_blocks[i][j].block_virt_addr =
+				mac_control->rings[i].rx_blocks[j].block_virt_addr =
 				    tmp_v_addr;
 				return -ENOMEM;
 			}
 			memset(tmp_v_addr, 0, size);
-			nic->rx_blocks[i][j].block_virt_addr = tmp_v_addr;
-			nic->rx_blocks[i][j].block_dma_addr = tmp_p_addr;
+			mac_control->rings[i].rx_blocks[j].block_virt_addr =
+				tmp_v_addr;
+			mac_control->rings[i].rx_blocks[j].block_dma_addr =
+				tmp_p_addr;
 		}
 		/* Interlinking all Rx Blocks */
 		for (j = 0; j < blk_cnt; j++) {
-			tmp_v_addr = nic->rx_blocks[i][j].block_virt_addr;
+			tmp_v_addr =
+				mac_control->rings[i].rx_blocks[j].block_virt_addr;
 			tmp_v_addr_next =
-			    nic->rx_blocks[i][(j + 1) %
+				mac_control->rings[i].rx_blocks[(j + 1) %
 					      blk_cnt].block_virt_addr;
-			tmp_p_addr = nic->rx_blocks[i][j].block_dma_addr;
+			tmp_p_addr =
+				mac_control->rings[i].rx_blocks[j].block_dma_addr;
 			tmp_p_addr_next =
-			    nic->rx_blocks[i][(j + 1) %
+				mac_control->rings[i].rx_blocks[(j + 1) %
 					      blk_cnt].block_dma_addr;
 
 			pre_rxd_blk = (RxD_block_t *) tmp_v_addr;
-			pre_rxd_blk->reserved_1 = END_OF_BLOCK;	/* last RxD 
+			pre_rxd_blk->reserved_1 = END_OF_BLOCK;	/* last RxD
 								 * marker.
 								 */
 #ifndef	CONFIG_2BUFF_MODE
@@ -433,43 +450,43 @@
 	}
 
 #ifdef CONFIG_2BUFF_MODE
-	/* 
+	/*
 	 * Allocation of Storages for buffer addresses in 2BUFF mode
 	 * and the buffers as well.
 	 */
 	for (i = 0; i < config->rx_ring_num; i++) {
 		blk_cnt =
 		    config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
-		nic->ba[i] = kmalloc((sizeof(buffAdd_t *) * blk_cnt),
+		mac_control->rings[i].ba = kmalloc((sizeof(buffAdd_t *) * blk_cnt),
 				     GFP_KERNEL);
-		if (!nic->ba[i])
+		if (!mac_control->rings[i].ba)
 			return -ENOMEM;
 		for (j = 0; j < blk_cnt; j++) {
 			int k = 0;
-			nic->ba[i][j] = kmalloc((sizeof(buffAdd_t) *
+			mac_control->rings[i].ba[j] = kmalloc((sizeof(buffAdd_t) *
 						 (MAX_RXDS_PER_BLOCK + 1)),
 						GFP_KERNEL);
-			if (!nic->ba[i][j])
+			if (!mac_control->rings[i].ba[j])
 				return -ENOMEM;
 			while (k != MAX_RXDS_PER_BLOCK) {
-				ba = &nic->ba[i][j][k];
+				ba = &mac_control->rings[i].ba[j][k];
 
-				ba->ba_0_org = kmalloc
+				ba->ba_0_org = (void *) kmalloc
 				    (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
 				if (!ba->ba_0_org)
 					return -ENOMEM;
-				tmp = (unsigned long) ba->ba_0_org;
+				tmp = (u64) ba->ba_0_org;
 				tmp += ALIGN_SIZE;
-				tmp &= ~((unsigned long) ALIGN_SIZE);
+				tmp &= ~((u64) ALIGN_SIZE);
 				ba->ba_0 = (void *) tmp;
 
-				ba->ba_1_org = kmalloc
+				ba->ba_1_org = (void *) kmalloc
 				    (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
 				if (!ba->ba_1_org)
 					return -ENOMEM;
-				tmp = (unsigned long) ba->ba_1_org;
+				tmp = (u64) ba->ba_1_org;
 				tmp += ALIGN_SIZE;
-				tmp &= ~((unsigned long) ALIGN_SIZE);
+				tmp &= ~((u64) ALIGN_SIZE);
 				ba->ba_1 = (void *) tmp;
 				k++;
 			}
@@ -483,9 +500,9 @@
 	    (nic->pdev, size, &mac_control->stats_mem_phy);
 
 	if (!mac_control->stats_mem) {
-		/* 
-		 * In case of failure, free_shared_mem() is called, which 
-		 * should free any memory that was alloced till the 
+		/*
+		 * In case of failure, free_shared_mem() is called, which
+		 * should free any memory that was alloced till the
 		 * failure happened.
 		 */
 		return -ENOMEM;
@@ -495,15 +512,14 @@
 	tmp_v_addr = mac_control->stats_mem;
 	mac_control->stats_info = (StatInfo_t *) tmp_v_addr;
 	memset(tmp_v_addr, 0, size);
-
 	DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
 		  (unsigned long long) tmp_p_addr);
 
 	return SUCCESS;
 }
 
-/**  
- * free_shared_mem - Free the allocated Memory 
+/**
+ * free_shared_mem - Free the allocated Memory
  * @nic:  Device private variable.
  * Description: This function is to free all memory locations allocated by
  * the init_shared_mem() function and return it to the kernel.
@@ -533,15 +549,18 @@
 						lst_per_page);
 		for (j = 0; j < page_num; j++) {
 			int mem_blks = (j * lst_per_page);
-			if (!nic->list_info[i][mem_blks].list_virt_addr)
+			if (!mac_control->fifos[i].list_info[mem_blks].
+			    list_virt_addr)
 				break;
 			pci_free_consistent(nic->pdev, PAGE_SIZE,
-					    nic->list_info[i][mem_blks].
+					    mac_control->fifos[i].
+					    list_info[mem_blks].
 					    list_virt_addr,
-					    nic->list_info[i][mem_blks].
+					    mac_control->fifos[i].
+					    list_info[mem_blks].
 					    list_phy_addr);
 		}
-		kfree(nic->list_info[i]);
+		kfree(mac_control->fifos[i].list_info);
 	}
 
 #ifndef CONFIG_2BUFF_MODE
@@ -550,10 +569,12 @@
 	size = SIZE_OF_BLOCK;
 #endif
 	for (i = 0; i < config->rx_ring_num; i++) {
-		blk_cnt = nic->block_count[i];
+		blk_cnt = mac_control->rings[i].block_count;
 		for (j = 0; j < blk_cnt; j++) {
-			tmp_v_addr = nic->rx_blocks[i][j].block_virt_addr;
-			tmp_p_addr = nic->rx_blocks[i][j].block_dma_addr;
+			tmp_v_addr = mac_control->rings[i].rx_blocks[j].
+				block_virt_addr;
+			tmp_p_addr = mac_control->rings[i].rx_blocks[j].
+				block_dma_addr;
 			if (tmp_v_addr == NULL)
 				break;
 			pci_free_consistent(nic->pdev, size,
@@ -566,35 +587,21 @@
 	for (i = 0; i < config->rx_ring_num; i++) {
 		blk_cnt =
 		    config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
-		if (!nic->ba[i])
-			goto end_free;
 		for (j = 0; j < blk_cnt; j++) {
 			int k = 0;
-			if (!nic->ba[i][j]) {
-				kfree(nic->ba[i]);
-				goto end_free;
-			}
+			if (!mac_control->rings[i].ba[j])
+				continue;
 			while (k != MAX_RXDS_PER_BLOCK) {
-				buffAdd_t *ba = &nic->ba[i][j][k];
-				if (!ba || !ba->ba_0_org || !ba->ba_1_org)
-				{
-					kfree(nic->ba[i]);
-					kfree(nic->ba[i][j]);
-					if(ba->ba_0_org)
-						kfree(ba->ba_0_org);
-					if(ba->ba_1_org)
-						kfree(ba->ba_1_org);
-					goto end_free;
-				}
+				buffAdd_t *ba = &mac_control->rings[i].ba[j][k];
 				kfree(ba->ba_0_org);
 				kfree(ba->ba_1_org);
 				k++;
 			}
-			kfree(nic->ba[i][j]);
+			kfree(mac_control->rings[i].ba[j]);
 		}
-		kfree(nic->ba[i]);
+		if (mac_control->rings[i].ba)
+			kfree(mac_control->rings[i].ba);
 	}
-end_free:
 #endif
 
 	if (mac_control->stats_mem) {
@@ -605,12 +612,12 @@
 	}
 }
 
-/**  
- *  init_nic - Initialization of hardware 
+/**
+ *  init_nic - Initialization of hardware
  *  @nic: device peivate variable
- *  Description: The function sequentially configures every block 
- *  of the H/W from their reset values. 
- *  Return Value:  SUCCESS on success and 
+ *  Description: The function sequentially configures every block
+ *  of the H/W from their reset values.
+ *  Return Value:  SUCCESS on success and
  *  '-1' on failure (endian settings incorrect).
  */
 
@@ -626,12 +633,13 @@
 	struct config_param *config;
 	int mdio_cnt = 0, dtx_cnt = 0;
 	unsigned long long mem_share;
+	int mem_size;
 
 	mac_control = &nic->mac_control;
 	config = &nic->config;
 
-	/* Initialize swapper control register */
-	if (s2io_set_swapper(nic)) {
+	/* to set the swapper control on the card */
+	if(s2io_set_swapper(nic)) {
 		DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n");
 		return -1;
 	}
@@ -639,8 +647,8 @@
 	/* Remove XGXS from reset state */
 	val64 = 0;
 	writeq(val64, &bar0->sw_reset);
-	val64 = readq(&bar0->sw_reset);
 	msleep(500);
+	val64 = readq(&bar0->sw_reset);
 
 	/*  Enable Receiving broadcasts */
 	add = &bar0->mac_cfg;
@@ -660,18 +668,18 @@
 	val64 = dev->mtu;
 	writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
 
-	/* 
-	 * Configuring the XAUI Interface of Xena. 
+	/*
+	 * Configuring the XAUI Interface of Xena.
 	 * ***************************************
-	 * To Configure the Xena's XAUI, one has to write a series 
-	 * of 64 bit values into two registers in a particular 
-	 * sequence. Hence a macro 'SWITCH_SIGN' has been defined 
-	 * which will be defined in the array of configuration values 
-	 * (default_dtx_cfg & default_mdio_cfg) at appropriate places 
-	 * to switch writing from one regsiter to another. We continue 
+	 * To Configure the Xena's XAUI, one has to write a series
+	 * of 64 bit values into two registers in a particular
+	 * sequence. Hence a macro 'SWITCH_SIGN' has been defined
+	 * which will be defined in the array of configuration values
+	 * (default_dtx_cfg & default_mdio_cfg) at appropriate places
+	 * to switch writing from one regsiter to another. We continue
 	 * writing these values until we encounter the 'END_SIGN' macro.
-	 * For example, After making a series of 21 writes into 
-	 * dtx_control register the 'SWITCH_SIGN' appears and hence we 
+	 * For example, After making a series of 21 writes into
+	 * dtx_control register the 'SWITCH_SIGN' appears and hence we
 	 * start writing into mdio_control until we encounter END_SIGN.
 	 */
 	while (1) {
@@ -752,8 +760,8 @@
 	DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
 		  &bar0->tx_fifo_partition_0, (unsigned long long) val64);
 
-	/* 
-	 * Initialization of Tx_PA_CONFIG register to ignore packet 
+	/*
+	 * Initialization of Tx_PA_CONFIG register to ignore packet
 	 * integrity checking.
 	 */
 	val64 = readq(&bar0->tx_pa_cfg);
@@ -770,54 +778,54 @@
 	}
 	writeq(val64, &bar0->rx_queue_priority);
 
-	/* 
-	 * Allocating equal share of memory to all the 
+	/*
+	 * Allocating equal share of memory to all the
 	 * configured Rings.
 	 */
 	val64 = 0;
+	mem_size = 64;
 	for (i = 0; i < config->rx_ring_num; i++) {
 		switch (i) {
 		case 0:
-			mem_share = (64 / config->rx_ring_num +
-				     64 % config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num +
+				     mem_size % config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
 			continue;
 		case 1:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
 			continue;
 		case 2:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
 			continue;
 		case 3:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
 			continue;
 		case 4:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
 			continue;
 		case 5:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
 			continue;
 		case 6:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
 			continue;
 		case 7:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
 			continue;
 		}
 	}
 	writeq(val64, &bar0->rx_queue_cfg);
 
-	/* 
-	 * Initializing the Tx round robin registers to 0.
-	 * Filling Tx and Rx round robin registers as per the 
-	 * number of FIFOs and Rings is still TODO.
+	/* Initializing the Tx round robin registers to 0
+	 * filling tx and rx round robin registers as per
+	 * the number of FIFOs and Rings is still TODO
 	 */
 	writeq(0, &bar0->tx_w_round_robin_0);
 	writeq(0, &bar0->tx_w_round_robin_1);
@@ -825,30 +833,30 @@
 	writeq(0, &bar0->tx_w_round_robin_3);
 	writeq(0, &bar0->tx_w_round_robin_4);
 
-	/* 
+	/*
 	 * TODO
-	 * Disable Rx steering. Hard coding all packets be steered to
-	 * Queue 0 for now. 
+	 * Disable Rx steering. Hard coding all packets to be steered to
+	 * Queue 0 for now.
 	 */
 	val64 = 0x8080808080808080ULL;
 	writeq(val64, &bar0->rts_qos_steering);
 
 	/* UDP Fix */
 	val64 = 0;
-	for (i = 1; i < 8; i++)
+	for (i = 0; i < 8; i++)
 		writeq(val64, &bar0->rts_frm_len_n[i]);
 
-	/* Set rts_frm_len register for fifo 0 */
-	writeq(MAC_RTS_FRM_LEN_SET(dev->mtu + 22),
-	       &bar0->rts_frm_len_n[0]);
+	/* Set the default rts frame length for ring0 */
+	writeq(MAC_RTS_FRM_LEN_SET(dev->mtu+22),
+		&bar0->rts_frm_len_n[0]);
 
-	/* Enable statistics */
+	/* Program statistics memory */
 	writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
 	val64 = SET_UPDT_PERIOD(Stats_refresh_time) |
 	    STAT_CFG_STAT_RO | STAT_CFG_STAT_EN;
 	writeq(val64, &bar0->stat_cfg);
 
-	/* 
+	/*
 	 * Initializing the sampling rate for the device to calculate the
 	 * bandwidth utilization.
 	 */
@@ -857,11 +865,12 @@
 	writeq(val64, &bar0->mac_link_util);
 
 
-	/* 
-	 * Initializing the Transmit and Receive Traffic Interrupt 
+	/*
+	 * Initializing the Transmit and Receive Traffic Interrupt
 	 * Scheme.
 	 */
-	/* TTI Initialization. Default Tx timer gets us about
+	/*
+	 * TTI Initialization. Default Tx timer gets us about
 	 * 250 interrupts per sec. Continuous interrupts are enabled
 	 * by default.
 	 */
@@ -880,7 +889,7 @@
 	val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
 	writeq(val64, &bar0->tti_command_mem);
 
-	/* 
+	/*
 	 * Once the operation completes, the Strobe bit of the command
 	 * register will be reset. We poll for this particular condition
 	 * We wait for a maximum of 500ms for the operation to complete,
@@ -917,7 +926,7 @@
 	val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD;
 	writeq(val64, &bar0->rti_command_mem);
 
-	/* 
+	/*
 	 * Once the operation completes, the Strobe bit of the command
 	 * register will be reset. We poll for this particular condition
 	 * We wait for a maximum of 500ms for the operation to complete,
@@ -926,7 +935,7 @@
 	time = 0;
 	while (TRUE) {
 		val64 = readq(&bar0->rti_command_mem);
-		if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
+		if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) {
 			break;
 		}
 		if (time > 10) {
@@ -938,15 +947,15 @@
 		msleep(50);
 	}
 
-	/* 
-	 * Initializing proper values as Pause threshold into all 
+	/*
+	 * Initializing proper values as Pause threshold into all
 	 * the 8 Queues on Rx side.
 	 */
 	writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
 	writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
 
 	/* Disable RMAC PAD STRIPPING */
-	add = &bar0->mac_cfg;
+	add = (void *) &bar0->mac_cfg;
 	val64 = readq(&bar0->mac_cfg);
 	val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
 	writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
@@ -955,8 +964,8 @@
 	writel((u32) (val64 >> 32), (add + 4));
 	val64 = readq(&bar0->mac_cfg);
 
-	/* 
-	 * Set the time value to be inserted in the pause frame 
+	/*
+	 * Set the time value to be inserted in the pause frame
 	 * generated by xena.
 	 */
 	val64 = readq(&bar0->rmac_pause_cfg);
@@ -964,7 +973,7 @@
 	val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
 	writeq(val64, &bar0->rmac_pause_cfg);
 
-	/* 
+	/*
 	 * Set the Threshold Limit for Generating the pause frame
 	 * If the amount of data in any Queue exceeds ratio of
 	 * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
@@ -988,8 +997,8 @@
 	}
 	writeq(val64, &bar0->mc_pause_thresh_q4q7);
 
-	/* 
-	 * TxDMA will stop Read request if the number of read split has 
+	/*
+	 * TxDMA will stop Read request if the number of read split has
 	 * exceeded the limit pointed by shared_splits
 	 */
 	val64 = readq(&bar0->pic_control);
@@ -999,14 +1008,14 @@
 	return SUCCESS;
 }
 
-/**  
- *  en_dis_able_nic_intrs - Enable or Disable the interrupts 
+/**
+ *  en_dis_able_nic_intrs - Enable or Disable the interrupts
  *  @nic: device private variable,
  *  @mask: A mask indicating which Intr block must be modified and,
  *  @flag: A flag indicating whether to enable or disable the Intrs.
  *  Description: This function will either disable or enable the interrupts
- *  depending on the flag argument. The mask argument can be used to 
- *  enable/disable any Intr block. 
+ *  depending on the flag argument. The mask argument can be used to
+ *  enable/disable any Intr block.
  *  Return Value: NONE.
  */
 
@@ -1024,20 +1033,20 @@
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/*  
+			/*
 			 * Disabled all PCIX, Flash, MDIO, IIC and GPIO
-			 * interrupts for now. 
-			 * TODO 
+			 * interrupts for now.
+			 * TODO
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
-			/* 
+			/*
 			 * No MSI Support is available presently, so TTI and
 			 * RTI interrupts are also disabled.
 			 */
 		} else if (flag == DISABLE_INTRS) {
-			/*  
-			 * Disable PIC Intrs in the general 
-			 * intr mask register 
+			/*
+			 * Disable PIC Intrs in the general
+			 * intr mask register
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
 			temp64 = readq(&bar0->general_int_mask);
@@ -1055,27 +1064,27 @@
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/* 
-			 * Keep all interrupts other than PFC interrupt 
+			/*
+			 * Keep all interrupts other than PFC interrupt
 			 * and PCC interrupt disabled in DMA level.
 			 */
 			val64 = DISABLE_ALL_INTRS & ~(TXDMA_PFC_INT_M |
 						      TXDMA_PCC_INT_M);
 			writeq(val64, &bar0->txdma_int_mask);
-			/* 
-			 * Enable only the MISC error 1 interrupt in PFC block 
+			/*
+			 * Enable only the MISC error 1 interrupt in PFC block
 			 */
 			val64 = DISABLE_ALL_INTRS & (~PFC_MISC_ERR_1);
 			writeq(val64, &bar0->pfc_err_mask);
-			/* 
-			 * Enable only the FB_ECC error interrupt in PCC block 
+			/*
+			 * Enable only the FB_ECC error interrupt in PCC block
 			 */
 			val64 = DISABLE_ALL_INTRS & (~PCC_FB_ECC_ERR);
 			writeq(val64, &bar0->pcc_err_mask);
 		} else if (flag == DISABLE_INTRS) {
-			/* 
-			 * Disable TxDMA Intrs in the general intr mask 
-			 * register 
+			/*
+			 * Disable TxDMA Intrs in the general intr mask
+			 * register
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->txdma_int_mask);
 			writeq(DISABLE_ALL_INTRS, &bar0->pfc_err_mask);
@@ -1093,15 +1102,15 @@
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/* 
-			 * All RxDMA block interrupts are disabled for now 
-			 * TODO 
+			/*
+			 * All RxDMA block interrupts are disabled for now
+			 * TODO
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
 		} else if (flag == DISABLE_INTRS) {
-			/*  
-			 * Disable RxDMA Intrs in the general intr mask 
-			 * register 
+			/*
+			 * Disable RxDMA Intrs in the general intr mask
+			 * register
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
 			temp64 = readq(&bar0->general_int_mask);
@@ -1118,8 +1127,8 @@
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/* 
-			 * All MAC block error interrupts are disabled for now 
+			/*
+			 * All MAC block error interrupts are disabled for now
 			 * except the link status change interrupt.
 			 * TODO
 			 */
@@ -1132,8 +1141,8 @@
 			val64 &= ~((u64) RMAC_LINK_STATE_CHANGE_INT);
 			writeq(val64, &bar0->mac_rmac_err_mask);
 		} else if (flag == DISABLE_INTRS) {
-			/*  
-			 * Disable MAC Intrs in the general intr mask register 
+			/*
+			 * Disable MAC Intrs in the general intr mask register
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->mac_int_mask);
 			writeq(DISABLE_ALL_INTRS,
@@ -1152,14 +1161,14 @@
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/* 
+			/*
 			 * All XGXS block error interrupts are disabled for now
-			 * TODO 
+			 * TODO
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
 		} else if (flag == DISABLE_INTRS) {
-			/*  
-			 * Disable MC Intrs in the general intr mask register 
+			/*
+			 * Disable MC Intrs in the general intr mask register
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
 			temp64 = readq(&bar0->general_int_mask);
@@ -1175,9 +1184,9 @@
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/* 
-			 * All MC block error interrupts are disabled for now
-			 * TODO 
+			/*
+			 * All MC block error interrupts are disabled for now.
+			 * TODO
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->mc_int_mask);
 		} else if (flag == DISABLE_INTRS) {
@@ -1199,14 +1208,14 @@
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/* 
+			/*
 			 * Enable all the Tx side interrupts
-			 * writing 0 Enables all 64 TX interrupt levels 
+			 * writing 0 Enables all 64 TX interrupt levels
 			 */
 			writeq(0x0, &bar0->tx_traffic_mask);
 		} else if (flag == DISABLE_INTRS) {
-			/* 
-			 * Disable Tx Traffic Intrs in the general intr mask 
+			/*
+			 * Disable Tx Traffic Intrs in the general intr mask
 			 * register.
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
@@ -1226,8 +1235,8 @@
 			/* writing 0 Enables all 8 RX interrupt levels */
 			writeq(0x0, &bar0->rx_traffic_mask);
 		} else if (flag == DISABLE_INTRS) {
-			/*  
-			 * Disable Rx Traffic Intrs in the general intr mask 
+			/*
+			 * Disable Rx Traffic Intrs in the general intr mask
 			 * register.
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
@@ -1238,20 +1247,42 @@
 	}
 }
 
-/**  
- *  verify_xena_quiescence - Checks whether the H/W is ready 
+static int check_prc_pcc_state(u64 val64, int flag)
+{
+	int ret = 0;
+
+	if (flag == FALSE) {
+		if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) &&
+		    ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
+		     ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
+			ret = 1;
+		}
+	} else {
+		if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
+		     ADAPTER_STATUS_RMAC_PCC_IDLE) &&
+		    (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
+		     ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
+		      ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
+			ret = 1;
+		}
+	}
+
+	return ret;
+}
+/**
+ *  verify_xena_quiescence - Checks whether the H/W is ready
  *  @val64 :  Value read from adapter status register.
  *  @flag : indicates if the adapter enable bit was ever written once
  *  before.
  *  Description: Returns whether the H/W is ready to go or not. Depending
- *  on whether adapter enable bit was written or not the comparison 
+ *  on whether adapter enable bit was written or not the comparison
  *  differs and the calling function passes the input argument flag to
  *  indicate this.
- *  Return: 1 If xena is quiescence 
+ *  Return: 1 If xena is quiescence
  *          0 If Xena is not quiescence
  */
 
-static int verify_xena_quiescence(u64 val64, int flag)
+static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag)
 {
 	int ret = 0;
 	u64 tmp64 = ~((u64) val64);
@@ -1263,25 +1294,7 @@
 	      ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY |
 	      ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK |
 	      ADAPTER_STATUS_P_PLL_LOCK))) {
-		if (flag == FALSE) {
-			if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) &&
-			    ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
-			     ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
-
-				ret = 1;
-
-			}
-		} else {
-			if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
-			     ADAPTER_STATUS_RMAC_PCC_IDLE) &&
-			    (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
-			     ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
-			      ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
-
-				ret = 1;
-
-			}
-		}
+		ret = check_prc_pcc_state(val64, flag);
 	}
 
 	return ret;
@@ -1290,12 +1303,12 @@
 /**
  * fix_mac_address -  Fix for Mac addr problem on Alpha platforms
  * @sp: Pointer to device specifc structure
- * Description : 
+ * Description :
  * New procedure to clear mac address reading  problems on Alpha platforms
  *
  */
 
-static void fix_mac_address(nic_t * sp)
+void fix_mac_address(nic_t * sp)
 {
 	XENA_dev_config_t __iomem *bar0 = sp->bar0;
 	u64 val64;
@@ -1303,20 +1316,21 @@
 
 	while (fix_mac[i] != END_SIGN) {
 		writeq(fix_mac[i++], &bar0->gpio_control);
+		udelay(10);
 		val64 = readq(&bar0->gpio_control);
 	}
 }
 
 /**
- *  start_nic - Turns the device on   
+ *  start_nic - Turns the device on
  *  @nic : device private variable.
- *  Description: 
- *  This function actually turns the device on. Before this  function is 
- *  called,all Registers are configured from their reset states 
- *  and shared memory is allocated but the NIC is still quiescent. On 
+ *  Description:
+ *  This function actually turns the device on. Before this  function is
+ *  called,all Registers are configured from their reset states
+ *  and shared memory is allocated but the NIC is still quiescent. On
  *  calling this function, the device interrupts are cleared and the NIC is
  *  literally switched on by writing into the adapter control register.
- *  Return Value: 
+ *  Return Value:
  *  SUCCESS on success and -1 on failure.
  */
 
@@ -1325,8 +1339,8 @@
 	XENA_dev_config_t __iomem *bar0 = nic->bar0;
 	struct net_device *dev = nic->dev;
 	register u64 val64 = 0;
-	u16 interruptible, i;
-	u16 subid;
+	u16 interruptible;
+	u16 subid, i;
 	mac_info_t *mac_control;
 	struct config_param *config;
 
@@ -1335,7 +1349,7 @@
 
 	/*  PRC Initialization and configuration */
 	for (i = 0; i < config->rx_ring_num; i++) {
-		writeq((u64) nic->rx_blocks[i][0].block_dma_addr,
+		writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr,
 		       &bar0->prc_rxd0_n[i]);
 
 		val64 = readq(&bar0->prc_ctrl_n[i]);
@@ -1354,7 +1368,7 @@
 	writeq(val64, &bar0->rx_pa_cfg);
 #endif
 
-	/* 
+	/*
 	 * Enabling MC-RLDRAM. After enabling the device, we timeout
 	 * for around 100ms, which is approximately the time required
 	 * for the device to be ready for operation.
@@ -1364,27 +1378,27 @@
 	SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
 	val64 = readq(&bar0->mc_rldram_mrs);
 
-	msleep(100);			/* Delay by around 100 ms. */
+	msleep(100);	/* Delay by around 100 ms. */
 
 	/* Enabling ECC Protection. */
 	val64 = readq(&bar0->adapter_control);
 	val64 &= ~ADAPTER_ECC_EN;
 	writeq(val64, &bar0->adapter_control);
 
-	/* 
-	 * Clearing any possible Link state change interrupts that 
+	/*
+	 * Clearing any possible Link state change interrupts that
 	 * could have popped up just before Enabling the card.
 	 */
 	val64 = readq(&bar0->mac_rmac_err_reg);
 	if (val64)
 		writeq(val64, &bar0->mac_rmac_err_reg);
 
-	/* 
-	 * Verify if the device is ready to be enabled, if so enable 
+	/*
+	 * Verify if the device is ready to be enabled, if so enable
 	 * it.
 	 */
 	val64 = readq(&bar0->adapter_status);
-	if (!verify_xena_quiescence(val64, nic->device_enabled_once)) {
+	if (!verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
 		DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
 		DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
 			  (unsigned long long) val64);
@@ -1396,12 +1410,12 @@
 	    RX_MAC_INTR;
 	en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
 
-	/* 
+	/*
 	 * With some switches, link might be already up at this point.
-	 * Because of this weird behavior, when we enable laser, 
-	 * we may not get link. We need to handle this. We cannot 
-	 * figure out which switch is misbehaving. So we are forced to 
-	 * make a global change. 
+	 * Because of this weird behavior, when we enable laser,
+	 * we may not get link. We need to handle this. We cannot
+	 * figure out which switch is misbehaving. So we are forced to
+	 * make a global change.
 	 */
 
 	/* Enabling Laser. */
@@ -1416,17 +1430,17 @@
 		val64 |= 0x0000800000000000ULL;
 		writeq(val64, &bar0->gpio_control);
 		val64 = 0x0411040400000000ULL;
-		writeq(val64, (void __iomem *) bar0 + 0x2700);
+		writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
 	}
 
-	/* 
-	 * Don't see link state interrupts on certain switches, so 
+	/*
+	 * Don't see link state interrupts on certain switches, so
 	 * directly scheduling a link state task from here.
 	 */
 	schedule_work(&nic->set_link_task);
 
-	/* 
-	 * Here we are performing soft reset on XGXS to 
+	/*
+	 * Here we are performing soft reset on XGXS to
 	 * force link down. Since link is already up, we will get
 	 * link state change interrupt after this reset
 	 */
@@ -1443,12 +1457,12 @@
 	return SUCCESS;
 }
 
-/** 
- *  free_tx_buffers - Free all queued Tx buffers 
+/**
+ *  free_tx_buffers - Free all queued Tx buffers
  *  @nic : device private variable.
- *  Description: 
+ *  Description:
  *  Free all queued Tx buffers.
- *  Return Value: void 
+ *  Return Value: void
 */
 
 static void free_tx_buffers(struct s2io_nic *nic)
@@ -1466,7 +1480,7 @@
 
 	for (i = 0; i < config->tx_fifo_num; i++) {
 		for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
-			txdp = (TxD_t *) nic->list_info[i][j].
+			txdp = (TxD_t *) mac_control->fifos[i].list_info[j].
 			    list_virt_addr;
 			skb =
 			    (struct sk_buff *) ((unsigned long) txdp->
@@ -1482,16 +1496,16 @@
 		DBG_PRINT(INTR_DBG,
 			  "%s:forcibly freeing %d skbs on FIFO%d\n",
 			  dev->name, cnt, i);
-		mac_control->tx_curr_get_info[i].offset = 0;
-		mac_control->tx_curr_put_info[i].offset = 0;
+		mac_control->fifos[i].tx_curr_get_info.offset = 0;
+		mac_control->fifos[i].tx_curr_put_info.offset = 0;
 	}
 }
 
-/**  
- *   stop_nic -  To stop the nic  
+/**
+ *   stop_nic -  To stop the nic
  *   @nic ; device private variable.
- *   Description: 
- *   This function does exactly the opposite of what the start_nic() 
+ *   Description:
+ *   This function does exactly the opposite of what the start_nic()
  *   function does. This function is called to stop the device.
  *   Return Value:
  *   void.
@@ -1521,11 +1535,11 @@
 	}
 }
 
-/**  
- *  fill_rx_buffers - Allocates the Rx side skbs 
+/**
+ *  fill_rx_buffers - Allocates the Rx side skbs
  *  @nic:  device private variable
- *  @ring_no: ring number 
- *  Description: 
+ *  @ring_no: ring number
+ *  Description:
  *  The function allocates Rx side skbs and puts the physical
  *  address of these buffers into the RxD buffer pointers, so that the NIC
  *  can DMA the received frame into these locations.
@@ -1533,8 +1547,8 @@
  *  1. single buffer,
  *  2. three buffer and
  *  3. Five buffer modes.
- *  Each mode defines how many fragments the received frame will be split 
- *  up into by the NIC. The frame is split into L3 header, L4 Header, 
+ *  Each mode defines how many fragments the received frame will be split
+ *  up into by the NIC. The frame is split into L3 header, L4 Header,
  *  L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
  *  is split into 3 fragments. As of now only single buffer mode is
  *  supported.
@@ -1542,7 +1556,7 @@
  *  SUCCESS on success or an appropriate -ve value on failure.
  */
 
-static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
+int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
 {
 	struct net_device *dev = nic->dev;
 	struct sk_buff *skb;
@@ -1550,14 +1564,13 @@
 	int off, off1, size, block_no, block_no1;
 	int offset, offset1;
 	u32 alloc_tab = 0;
-	u32 alloc_cnt = nic->pkt_cnt[ring_no] -
-	    atomic_read(&nic->rx_bufs_left[ring_no]);
+	u32 alloc_cnt;
 	mac_info_t *mac_control;
 	struct config_param *config;
 #ifdef CONFIG_2BUFF_MODE
 	RxD_t *rxdpnext;
 	int nextblk;
-	unsigned long tmp;
+	u64 tmp;
 	buffAdd_t *ba;
 	dma_addr_t rxdpphys;
 #endif
@@ -1567,17 +1580,18 @@
 
 	mac_control = &nic->mac_control;
 	config = &nic->config;
-
+	alloc_cnt = mac_control->rings[ring_no].pkt_cnt -
+	    atomic_read(&nic->rx_bufs_left[ring_no]);
 	size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
 	    HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
 
 	while (alloc_tab < alloc_cnt) {
-		block_no = mac_control->rx_curr_put_info[ring_no].
+		block_no = mac_control->rings[ring_no].rx_curr_put_info.
 		    block_index;
-		block_no1 = mac_control->rx_curr_get_info[ring_no].
+		block_no1 = mac_control->rings[ring_no].rx_curr_get_info.
 		    block_index;
-		off = mac_control->rx_curr_put_info[ring_no].offset;
-		off1 = mac_control->rx_curr_get_info[ring_no].offset;
+		off = mac_control->rings[ring_no].rx_curr_put_info.offset;
+		off1 = mac_control->rings[ring_no].rx_curr_get_info.offset;
 #ifndef CONFIG_2BUFF_MODE
 		offset = block_no * (MAX_RXDS_PER_BLOCK + 1) + off;
 		offset1 = block_no1 * (MAX_RXDS_PER_BLOCK + 1) + off1;
@@ -1586,7 +1600,7 @@
 		offset1 = block_no1 * (MAX_RXDS_PER_BLOCK) + off1;
 #endif
 
-		rxdp = nic->rx_blocks[ring_no][block_no].
+		rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
 		    block_virt_addr + off;
 		if ((offset == offset1) && (rxdp->Host_Control)) {
 			DBG_PRINT(INTR_DBG, "%s: Get and Put", dev->name);
@@ -1595,15 +1609,15 @@
 		}
 #ifndef	CONFIG_2BUFF_MODE
 		if (rxdp->Control_1 == END_OF_BLOCK) {
-			mac_control->rx_curr_put_info[ring_no].
+			mac_control->rings[ring_no].rx_curr_put_info.
 			    block_index++;
-			mac_control->rx_curr_put_info[ring_no].
-			    block_index %= nic->block_count[ring_no];
-			block_no = mac_control->rx_curr_put_info
-			    [ring_no].block_index;
+			mac_control->rings[ring_no].rx_curr_put_info.
+			    block_index %= mac_control->rings[ring_no].block_count;
+			block_no = mac_control->rings[ring_no].rx_curr_put_info.
+				block_index;
 			off++;
 			off %= (MAX_RXDS_PER_BLOCK + 1);
-			mac_control->rx_curr_put_info[ring_no].offset =
+			mac_control->rings[ring_no].rx_curr_put_info.offset =
 			    off;
 			rxdp = (RxD_t *) ((unsigned long) rxdp->Control_2);
 			DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
@@ -1611,30 +1625,30 @@
 		}
 #ifndef CONFIG_S2IO_NAPI
 		spin_lock_irqsave(&nic->put_lock, flags);
-		nic->put_pos[ring_no] =
+		mac_control->rings[ring_no].put_pos =
 		    (block_no * (MAX_RXDS_PER_BLOCK + 1)) + off;
 		spin_unlock_irqrestore(&nic->put_lock, flags);
 #endif
 #else
 		if (rxdp->Host_Control == END_OF_BLOCK) {
-			mac_control->rx_curr_put_info[ring_no].
+			mac_control->rings[ring_no].rx_curr_put_info.
 			    block_index++;
-			mac_control->rx_curr_put_info[ring_no].
-			    block_index %= nic->block_count[ring_no];
-			block_no = mac_control->rx_curr_put_info
-			    [ring_no].block_index;
+			mac_control->rings[ring_no].rx_curr_put_info.block_index
+			    %= mac_control->rings[ring_no].block_count;
+			block_no = mac_control->rings[ring_no].rx_curr_put_info
+			    .block_index;
 			off = 0;
 			DBG_PRINT(INTR_DBG, "%s: block%d at: 0x%llx\n",
 				  dev->name, block_no,
 				  (unsigned long long) rxdp->Control_1);
-			mac_control->rx_curr_put_info[ring_no].offset =
+			mac_control->rings[ring_no].rx_curr_put_info.offset =
 			    off;
-			rxdp = nic->rx_blocks[ring_no][block_no].
+			rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
 			    block_virt_addr;
 		}
 #ifndef CONFIG_S2IO_NAPI
 		spin_lock_irqsave(&nic->put_lock, flags);
-		nic->put_pos[ring_no] = (block_no *
+		mac_control->rings[ring_no].put_pos = (block_no *
 					 (MAX_RXDS_PER_BLOCK + 1)) + off;
 		spin_unlock_irqrestore(&nic->put_lock, flags);
 #endif
@@ -1646,27 +1660,27 @@
 		if (rxdp->Control_2 & BIT(0))
 #endif
 		{
-			mac_control->rx_curr_put_info[ring_no].
+			mac_control->rings[ring_no].rx_curr_put_info.
 			    offset = off;
 			goto end;
 		}
 #ifdef	CONFIG_2BUFF_MODE
-		/* 
-		 * RxDs Spanning cache lines will be replenished only 
-		 * if the succeeding RxD is also owned by Host. It 
-		 * will always be the ((8*i)+3) and ((8*i)+6) 
-		 * descriptors for the 48 byte descriptor. The offending 
+		/*
+		 * RxDs Spanning cache lines will be replenished only
+		 * if the succeeding RxD is also owned by Host. It
+		 * will always be the ((8*i)+3) and ((8*i)+6)
+		 * descriptors for the 48 byte descriptor. The offending
 		 * decsriptor is of-course the 3rd descriptor.
 		 */
-		rxdpphys = nic->rx_blocks[ring_no][block_no].
+		rxdpphys = mac_control->rings[ring_no].rx_blocks[block_no].
 		    block_dma_addr + (off * sizeof(RxD_t));
 		if (((u64) (rxdpphys)) % 128 > 80) {
-			rxdpnext = nic->rx_blocks[ring_no][block_no].
+			rxdpnext = mac_control->rings[ring_no].rx_blocks[block_no].
 			    block_virt_addr + (off + 1);
 			if (rxdpnext->Host_Control == END_OF_BLOCK) {
 				nextblk = (block_no + 1) %
-				    (nic->block_count[ring_no]);
-				rxdpnext = nic->rx_blocks[ring_no]
+				    (mac_control->rings[ring_no].block_count);
+				rxdpnext = mac_control->rings[ring_no].rx_blocks
 				    [nextblk].block_virt_addr;
 			}
 			if (rxdpnext->Control_2 & BIT(0))
@@ -1695,9 +1709,9 @@
 		rxdp->Control_1 |= RXD_OWN_XENA;
 		off++;
 		off %= (MAX_RXDS_PER_BLOCK + 1);
-		mac_control->rx_curr_put_info[ring_no].offset = off;
+		mac_control->rings[ring_no].rx_curr_put_info.offset = off;
 #else
-		ba = &nic->ba[ring_no][block_no][off];
+		ba = &mac_control->rings[ring_no].ba[block_no][off];
 		skb_reserve(skb, BUF0_LEN);
 		tmp = ((unsigned long) skb->data & ALIGN_SIZE);
 		if (tmp)
@@ -1721,8 +1735,9 @@
 		rxdp->Host_Control = (u64) ((unsigned long) (skb));
 		rxdp->Control_1 |= RXD_OWN_XENA;
 		off++;
-		mac_control->rx_curr_put_info[ring_no].offset = off;
+		mac_control->rings[ring_no].rx_curr_put_info.offset = off;
 #endif
+
 		atomic_inc(&nic->rx_bufs_left[ring_no]);
 		alloc_tab++;
 	}
@@ -1732,9 +1747,9 @@
 }
 
 /**
- *  free_rx_buffers - Frees all Rx buffers   
+ *  free_rx_buffers - Frees all Rx buffers
  *  @sp: device private variable.
- *  Description: 
+ *  Description:
  *  This function will free all Rx buffers allocated by host.
  *  Return Value:
  *  NONE.
@@ -1758,7 +1773,8 @@
 	for (i = 0; i < config->rx_ring_num; i++) {
 		for (j = 0, blk = 0; j < config->rx_cfg[i].num_rxd; j++) {
 			off = j % (MAX_RXDS_PER_BLOCK + 1);
-			rxdp = sp->rx_blocks[i][blk].block_virt_addr + off;
+			rxdp = mac_control->rings[i].rx_blocks[blk].
+				block_virt_addr + off;
 
 #ifndef CONFIG_2BUFF_MODE
 			if (rxdp->Control_1 == END_OF_BLOCK) {
@@ -1793,7 +1809,7 @@
 						 HEADER_SNAP_SIZE,
 						 PCI_DMA_FROMDEVICE);
 #else
-				ba = &sp->ba[i][blk][off];
+				ba = &mac_control->rings[i].ba[blk][off];
 				pci_unmap_single(sp->pdev, (dma_addr_t)
 						 rxdp->Buffer0_ptr,
 						 BUF0_LEN,
@@ -1813,10 +1829,10 @@
 			}
 			memset(rxdp, 0, sizeof(RxD_t));
 		}
-		mac_control->rx_curr_put_info[i].block_index = 0;
-		mac_control->rx_curr_get_info[i].block_index = 0;
-		mac_control->rx_curr_put_info[i].offset = 0;
-		mac_control->rx_curr_get_info[i].offset = 0;
+		mac_control->rings[i].rx_curr_put_info.block_index = 0;
+		mac_control->rings[i].rx_curr_get_info.block_index = 0;
+		mac_control->rings[i].rx_curr_put_info.offset = 0;
+		mac_control->rings[i].rx_curr_get_info.offset = 0;
 		atomic_set(&sp->rx_bufs_left[i], 0);
 		DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n",
 			  dev->name, buf_cnt, i);
@@ -1826,7 +1842,7 @@
 /**
  * s2io_poll - Rx interrupt handler for NAPI support
  * @dev : pointer to the device structure.
- * @budget : The number of packets that were budgeted to be processed 
+ * @budget : The number of packets that were budgeted to be processed
  * during  one pass through the 'Poll" function.
  * Description:
  * Comes into picture only if NAPI support has been incorporated. It does
@@ -1836,160 +1852,35 @@
  * 0 on success and 1 if there are No Rx packets to be processed.
  */
 
-#ifdef CONFIG_S2IO_NAPI
+#if defined(CONFIG_S2IO_NAPI)
 static int s2io_poll(struct net_device *dev, int *budget)
 {
 	nic_t *nic = dev->priv;
-	XENA_dev_config_t __iomem *bar0 = nic->bar0;
-	int pkts_to_process = *budget, pkt_cnt = 0;
-	register u64 val64 = 0;
-	rx_curr_get_info_t get_info, put_info;
-	int i, get_block, put_block, get_offset, put_offset, ring_bufs;
-#ifndef CONFIG_2BUFF_MODE
-	u16 val16, cksum;
-#endif
-	struct sk_buff *skb;
-	RxD_t *rxdp;
+	int pkt_cnt = 0, org_pkts_to_process;
 	mac_info_t *mac_control;
 	struct config_param *config;
-#ifdef CONFIG_2BUFF_MODE
-	buffAdd_t *ba;
-#endif
+	XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+	u64 val64;
+	int i;
 
 	mac_control = &nic->mac_control;
 	config = &nic->config;
 
-	if (pkts_to_process > dev->quota)
-		pkts_to_process = dev->quota;
+	nic->pkts_to_process = *budget;
+	if (nic->pkts_to_process > dev->quota)
+		nic->pkts_to_process = dev->quota;
+	org_pkts_to_process = nic->pkts_to_process;
 
 	val64 = readq(&bar0->rx_traffic_int);
 	writeq(val64, &bar0->rx_traffic_int);
 
 	for (i = 0; i < config->rx_ring_num; i++) {
-		get_info = mac_control->rx_curr_get_info[i];
-		get_block = get_info.block_index;
-		put_info = mac_control->rx_curr_put_info[i];
-		put_block = put_info.block_index;
-		ring_bufs = config->rx_cfg[i].num_rxd;
-		rxdp = nic->rx_blocks[i][get_block].block_virt_addr +
-		    get_info.offset;
-#ifndef	CONFIG_2BUFF_MODE
-		get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
-		    get_info.offset;
-		put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
-		    put_info.offset;
-		while ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
-		       (((get_offset + 1) % ring_bufs) != put_offset)) {
-			if (--pkts_to_process < 0) {
-				goto no_rx;
-			}
-			if (rxdp->Control_1 == END_OF_BLOCK) {
-				rxdp =
-				    (RxD_t *) ((unsigned long) rxdp->
-					       Control_2);
-				get_info.offset++;
-				get_info.offset %=
-				    (MAX_RXDS_PER_BLOCK + 1);
-				get_block++;
-				get_block %= nic->block_count[i];
-				mac_control->rx_curr_get_info[i].
-				    offset = get_info.offset;
-				mac_control->rx_curr_get_info[i].
-				    block_index = get_block;
-				continue;
-			}
-			get_offset =
-			    (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
-			    get_info.offset;
-			skb =
-			    (struct sk_buff *) ((unsigned long) rxdp->
-						Host_Control);
-			if (skb == NULL) {
-				DBG_PRINT(ERR_DBG, "%s: The skb is ",
-					  dev->name);
-				DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
-				goto no_rx;
-			}
-			val64 = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
-			val16 = (u16) (val64 >> 48);
-			cksum = RXD_GET_L4_CKSUM(rxdp->Control_1);
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer0_ptr,
-					 dev->mtu +
-					 HEADER_ETHERNET_II_802_3_SIZE +
-					 HEADER_802_2_SIZE +
-					 HEADER_SNAP_SIZE,
-					 PCI_DMA_FROMDEVICE);
-			rx_osm_handler(nic, val16, rxdp, i);
-			pkt_cnt++;
-			get_info.offset++;
-			get_info.offset %= (MAX_RXDS_PER_BLOCK + 1);
-			rxdp =
-			    nic->rx_blocks[i][get_block].block_virt_addr +
-			    get_info.offset;
-			mac_control->rx_curr_get_info[i].offset =
-			    get_info.offset;
+		rx_intr_handler(&mac_control->rings[i]);
+		pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
+		if (!nic->pkts_to_process) {
+			/* Quota for the current iteration has been met */
+			goto no_rx;
 		}
-#else
-		get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
-		    get_info.offset;
-		put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
-		    put_info.offset;
-		while (((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
-			!(rxdp->Control_2 & BIT(0))) &&
-		       (((get_offset + 1) % ring_bufs) != put_offset)) {
-			if (--pkts_to_process < 0) {
-				goto no_rx;
-			}
-			skb = (struct sk_buff *) ((unsigned long)
-						  rxdp->Host_Control);
-			if (skb == NULL) {
-				DBG_PRINT(ERR_DBG, "%s: The skb is ",
-					  dev->name);
-				DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
-				goto no_rx;
-			}
-
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer0_ptr,
-					 BUF0_LEN, PCI_DMA_FROMDEVICE);
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer1_ptr,
-					 BUF1_LEN, PCI_DMA_FROMDEVICE);
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer2_ptr,
-					 dev->mtu + BUF0_LEN + 4,
-					 PCI_DMA_FROMDEVICE);
-			ba = &nic->ba[i][get_block][get_info.offset];
-
-			rx_osm_handler(nic, rxdp, i, ba);
-
-			get_info.offset++;
-			mac_control->rx_curr_get_info[i].offset =
-			    get_info.offset;
-			rxdp =
-			    nic->rx_blocks[i][get_block].block_virt_addr +
-			    get_info.offset;
-
-			if (get_info.offset &&
-			    (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
-				get_info.offset = 0;
-				mac_control->rx_curr_get_info[i].
-				    offset = get_info.offset;
-				get_block++;
-				get_block %= nic->block_count[i];
-				mac_control->rx_curr_get_info[i].
-				    block_index = get_block;
-				rxdp =
-				    nic->rx_blocks[i][get_block].
-				    block_virt_addr;
-			}
-			get_offset =
-			    (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
-			    get_info.offset;
-			pkt_cnt++;
-		}
-#endif
 	}
 	if (!pkt_cnt)
 		pkt_cnt = 1;
@@ -2009,7 +1900,7 @@
 	en_dis_able_nic_intrs(nic, RX_TRAFFIC_INTR, ENABLE_INTRS);
 	return 0;
 
-      no_rx:
+no_rx:
 	dev->quota -= pkt_cnt;
 	*budget -= pkt_cnt;
 
@@ -2022,277 +1913,213 @@
 	}
 	return 1;
 }
-#else
-/**  
+#endif
+
+/**
  *  rx_intr_handler - Rx interrupt handler
  *  @nic: device private variable.
- *  Description: 
- *  If the interrupt is because of a received frame or if the 
+ *  Description:
+ *  If the interrupt is because of a received frame or if the
  *  receive ring contains fresh as yet un-processed frames,this function is
- *  called. It picks out the RxD at which place the last Rx processing had 
- *  stopped and sends the skb to the OSM's Rx handler and then increments 
+ *  called. It picks out the RxD at which place the last Rx processing had
+ *  stopped and sends the skb to the OSM's Rx handler and then increments
  *  the offset.
  *  Return Value:
  *  NONE.
  */
-
-static void rx_intr_handler(struct s2io_nic *nic)
+static void rx_intr_handler(ring_info_t *ring_data)
 {
+	nic_t *nic = ring_data->nic;
 	struct net_device *dev = (struct net_device *) nic->dev;
-	XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+	XENA_dev_config_t __iomem *bar0 = nic->bar0;
+	int get_block, get_offset, put_block, put_offset, ring_bufs;
 	rx_curr_get_info_t get_info, put_info;
 	RxD_t *rxdp;
 	struct sk_buff *skb;
-#ifndef CONFIG_2BUFF_MODE
-	u16 val16, cksum;
+#ifndef CONFIG_S2IO_NAPI
+	int pkt_cnt = 0;
 #endif
-	register u64 val64 = 0;
-	int get_block, get_offset, put_block, put_offset, ring_bufs;
-	int i, pkt_cnt = 0;
-	mac_info_t *mac_control;
-	struct config_param *config;
-#ifdef CONFIG_2BUFF_MODE
-	buffAdd_t *ba;
-#endif
+	register u64 val64;
 
-	mac_control = &nic->mac_control;
-	config = &nic->config;
-
-	/* 
-	 * rx_traffic_int reg is an R1 register, hence we read and write back 
-	 * the samevalue in the register to clear it.
+	/*
+	 * rx_traffic_int reg is an R1 register, hence we read and write
+	 * back the same value in the register to clear it
 	 */
-	val64 = readq(&bar0->rx_traffic_int);
-	writeq(val64, &bar0->rx_traffic_int);
+	val64 = readq(&bar0->tx_traffic_int);
+	writeq(val64, &bar0->tx_traffic_int);
 
-	for (i = 0; i < config->rx_ring_num; i++) {
-		get_info = mac_control->rx_curr_get_info[i];
-		get_block = get_info.block_index;
-		put_info = mac_control->rx_curr_put_info[i];
-		put_block = put_info.block_index;
-		ring_bufs = config->rx_cfg[i].num_rxd;
-		rxdp = nic->rx_blocks[i][get_block].block_virt_addr +
+	get_info = ring_data->rx_curr_get_info;
+	get_block = get_info.block_index;
+	put_info = ring_data->rx_curr_put_info;
+	put_block = put_info.block_index;
+	ring_bufs = get_info.ring_len+1;
+	rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
 		    get_info.offset;
-#ifndef	CONFIG_2BUFF_MODE
-		get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
-		    get_info.offset;
-		spin_lock(&nic->put_lock);
-		put_offset = nic->put_pos[i];
-		spin_unlock(&nic->put_lock);
-		while ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
-		       (((get_offset + 1) % ring_bufs) != put_offset)) {
-			if (rxdp->Control_1 == END_OF_BLOCK) {
-				rxdp = (RxD_t *) ((unsigned long)
-						  rxdp->Control_2);
-				get_info.offset++;
-				get_info.offset %=
-				    (MAX_RXDS_PER_BLOCK + 1);
-				get_block++;
-				get_block %= nic->block_count[i];
-				mac_control->rx_curr_get_info[i].
-				    offset = get_info.offset;
-				mac_control->rx_curr_get_info[i].
-				    block_index = get_block;
-				continue;
-			}
-			get_offset =
-			    (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
-			    get_info.offset;
-			skb = (struct sk_buff *) ((unsigned long)
-						  rxdp->Host_Control);
-			if (skb == NULL) {
-				DBG_PRINT(ERR_DBG, "%s: The skb is ",
-					  dev->name);
-				DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
-				return;
-			}
-			val64 = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
-			val16 = (u16) (val64 >> 48);
-			cksum = RXD_GET_L4_CKSUM(rxdp->Control_1);
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer0_ptr,
-					 dev->mtu +
-					 HEADER_ETHERNET_II_802_3_SIZE +
-					 HEADER_802_2_SIZE +
-					 HEADER_SNAP_SIZE,
-					 PCI_DMA_FROMDEVICE);
-			rx_osm_handler(nic, val16, rxdp, i);
-			get_info.offset++;
-			get_info.offset %= (MAX_RXDS_PER_BLOCK + 1);
-			rxdp =
-			    nic->rx_blocks[i][get_block].block_virt_addr +
-			    get_info.offset;
-			mac_control->rx_curr_get_info[i].offset =
-			    get_info.offset;
-			pkt_cnt++;
-			if ((indicate_max_pkts)
-			    && (pkt_cnt > indicate_max_pkts))
-				break;
-		}
+	get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+		get_info.offset;
+#ifndef CONFIG_S2IO_NAPI
+	spin_lock(&nic->put_lock);
+	put_offset = ring_data->put_pos;
+	spin_unlock(&nic->put_lock);
 #else
-		get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
-		    get_info.offset;
-		spin_lock(&nic->put_lock);
-		put_offset = nic->put_pos[i];
-		spin_unlock(&nic->put_lock);
-		while (((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
-			!(rxdp->Control_2 & BIT(0))) &&
-		       (((get_offset + 1) % ring_bufs) != put_offset)) {
-			skb = (struct sk_buff *) ((unsigned long)
-						  rxdp->Host_Control);
-			if (skb == NULL) {
-				DBG_PRINT(ERR_DBG, "%s: The skb is ",
-					  dev->name);
-				DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
-				return;
-			}
-
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer0_ptr,
-					 BUF0_LEN, PCI_DMA_FROMDEVICE);
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer1_ptr,
-					 BUF1_LEN, PCI_DMA_FROMDEVICE);
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer2_ptr,
-					 dev->mtu + BUF0_LEN + 4,
-					 PCI_DMA_FROMDEVICE);
-			ba = &nic->ba[i][get_block][get_info.offset];
-
-			rx_osm_handler(nic, rxdp, i, ba);
-
-			get_info.offset++;
-			mac_control->rx_curr_get_info[i].offset =
-			    get_info.offset;
-			rxdp =
-			    nic->rx_blocks[i][get_block].block_virt_addr +
-			    get_info.offset;
-
-			if (get_info.offset &&
-			    (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
-				get_info.offset = 0;
-				mac_control->rx_curr_get_info[i].
-				    offset = get_info.offset;
-				get_block++;
-				get_block %= nic->block_count[i];
-				mac_control->rx_curr_get_info[i].
-				    block_index = get_block;
-				rxdp =
-				    nic->rx_blocks[i][get_block].
-				    block_virt_addr;
-			}
-			get_offset =
-			    (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
-			    get_info.offset;
-			pkt_cnt++;
-			if ((indicate_max_pkts)
-			    && (pkt_cnt > indicate_max_pkts))
-				break;
-		}
+	put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
+		put_info.offset;
 #endif
+	while ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
+#ifdef CONFIG_2BUFF_MODE
+		(!rxdp->Control_2 & BIT(0)) &&
+#endif
+	        (((get_offset + 1) % ring_bufs) != put_offset)) {
+		skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control);
+		if (skb == NULL) {
+			DBG_PRINT(ERR_DBG, "%s: The skb is ",
+				  dev->name);
+			DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
+			return;
+		}
+#ifndef CONFIG_2BUFF_MODE
+		pci_unmap_single(nic->pdev, (dma_addr_t)
+				 rxdp->Buffer0_ptr,
+				 dev->mtu +
+				 HEADER_ETHERNET_II_802_3_SIZE +
+				 HEADER_802_2_SIZE +
+				 HEADER_SNAP_SIZE,
+				 PCI_DMA_FROMDEVICE);
+#else
+		pci_unmap_single(nic->pdev, (dma_addr_t)
+				 rxdp->Buffer0_ptr,
+				 BUF0_LEN, PCI_DMA_FROMDEVICE);
+		pci_unmap_single(nic->pdev, (dma_addr_t)
+				 rxdp->Buffer1_ptr,
+				 BUF1_LEN, PCI_DMA_FROMDEVICE);
+		pci_unmap_single(nic->pdev, (dma_addr_t)
+				 rxdp->Buffer2_ptr,
+				 dev->mtu + BUF0_LEN + 4,
+				 PCI_DMA_FROMDEVICE);
+#endif
+		rx_osm_handler(ring_data, rxdp);
+		get_info.offset++;
+		ring_data->rx_curr_get_info.offset =
+		    get_info.offset;
+		rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
+		    get_info.offset;
+		if (get_info.offset &&
+		    (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
+			get_info.offset = 0;
+			ring_data->rx_curr_get_info.offset
+			    = get_info.offset;
+			get_block++;
+			get_block %= ring_data->block_count;
+			ring_data->rx_curr_get_info.block_index
+			    = get_block;
+			rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
+		}
+
+		get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+			    get_info.offset;
+#ifdef CONFIG_S2IO_NAPI
+		nic->pkts_to_process -= 1;
+		if (!nic->pkts_to_process)
+			break;
+#else
+		pkt_cnt++;
 		if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
 			break;
+#endif
 	}
 }
-#endif
-/**  
+
+/**
  *  tx_intr_handler - Transmit interrupt handler
  *  @nic : device private variable
- *  Description: 
- *  If an interrupt was raised to indicate DMA complete of the 
- *  Tx packet, this function is called. It identifies the last TxD 
- *  whose buffer was freed and frees all skbs whose data have already 
+ *  Description:
+ *  If an interrupt was raised to indicate DMA complete of the
+ *  Tx packet, this function is called. It identifies the last TxD
+ *  whose buffer was freed and frees all skbs whose data have already
  *  DMA'ed into the NICs internal memory.
  *  Return Value:
  *  NONE
  */
 
-static void tx_intr_handler(struct s2io_nic *nic)
+static void tx_intr_handler(fifo_info_t *fifo_data)
 {
+	nic_t *nic = fifo_data->nic;
 	XENA_dev_config_t __iomem *bar0 = nic->bar0;
 	struct net_device *dev = (struct net_device *) nic->dev;
 	tx_curr_get_info_t get_info, put_info;
 	struct sk_buff *skb;
 	TxD_t *txdlp;
-	register u64 val64 = 0;
-	int i;
 	u16 j, frg_cnt;
-	mac_info_t *mac_control;
-	struct config_param *config;
+	register u64 val64 = 0;
 
-	mac_control = &nic->mac_control;
-	config = &nic->config;
-
-	/* 
-	 * tx_traffic_int reg is an R1 register, hence we read and write 
-	 * back the samevalue in the register to clear it.
+	/*
+	 * tx_traffic_int reg is an R1 register, hence we read and write
+	 * back the same value in the register to clear it
 	 */
 	val64 = readq(&bar0->tx_traffic_int);
 	writeq(val64, &bar0->tx_traffic_int);
 
-	for (i = 0; i < config->tx_fifo_num; i++) {
-		get_info = mac_control->tx_curr_get_info[i];
-		put_info = mac_control->tx_curr_put_info[i];
-		txdlp = (TxD_t *) nic->list_info[i][get_info.offset].
-		    list_virt_addr;
-		while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
-		       (get_info.offset != put_info.offset) &&
-		       (txdlp->Host_Control)) {
-			/* Check for TxD errors */
-			if (txdlp->Control_1 & TXD_T_CODE) {
-				unsigned long long err;
-				err = txdlp->Control_1 & TXD_T_CODE;
-				DBG_PRINT(ERR_DBG, "***TxD error %llx\n",
-					  err);
-			}
-
-			skb = (struct sk_buff *) ((unsigned long)
-						  txdlp->Host_Control);
-			if (skb == NULL) {
-				DBG_PRINT(ERR_DBG, "%s: Null skb ",
-					  dev->name);
-				DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
-				return;
-			}
-			nic->tx_pkt_count++;
-
-			frg_cnt = skb_shinfo(skb)->nr_frags;
-
-			/*  For unfragmented skb */
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 txdlp->Buffer_Pointer,
-					 skb->len - skb->data_len,
-					 PCI_DMA_TODEVICE);
-			if (frg_cnt) {
-				TxD_t *temp = txdlp;
-				txdlp++;
-				for (j = 0; j < frg_cnt; j++, txdlp++) {
-					skb_frag_t *frag =
-					    &skb_shinfo(skb)->frags[j];
-					pci_unmap_page(nic->pdev,
-						       (dma_addr_t)
-						       txdlp->
-						       Buffer_Pointer,
-						       frag->size,
-						       PCI_DMA_TODEVICE);
-				}
-				txdlp = temp;
-			}
-			memset(txdlp, 0,
-			       (sizeof(TxD_t) * config->max_txds));
-
-			/* Updating the statistics block */
-			nic->stats.tx_packets++;
-			nic->stats.tx_bytes += skb->len;
-			dev_kfree_skb_irq(skb);
-
-			get_info.offset++;
-			get_info.offset %= get_info.fifo_len + 1;
-			txdlp = (TxD_t *) nic->list_info[i]
-			    [get_info.offset].list_virt_addr;
-			mac_control->tx_curr_get_info[i].offset =
-			    get_info.offset;
+	get_info = fifo_data->tx_curr_get_info;
+	put_info = fifo_data->tx_curr_put_info;
+	txdlp = (TxD_t *) fifo_data->list_info[get_info.offset].
+	    list_virt_addr;
+	while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
+	       (get_info.offset != put_info.offset) &&
+	       (txdlp->Host_Control)) {
+		/* Check for TxD errors */
+		if (txdlp->Control_1 & TXD_T_CODE) {
+			unsigned long long err;
+			err = txdlp->Control_1 & TXD_T_CODE;
+			DBG_PRINT(ERR_DBG, "***TxD error %llx\n",
+				  err);
 		}
+
+		skb = (struct sk_buff *) ((unsigned long)
+				txdlp->Host_Control);
+		if (skb == NULL) {
+			DBG_PRINT(ERR_DBG, "%s: Null skb ",
+			__FUNCTION__);
+			DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
+			return;
+		}
+
+		frg_cnt = skb_shinfo(skb)->nr_frags;
+		nic->tx_pkt_count++;
+
+		pci_unmap_single(nic->pdev, (dma_addr_t)
+				 txdlp->Buffer_Pointer,
+				 skb->len - skb->data_len,
+				 PCI_DMA_TODEVICE);
+		if (frg_cnt) {
+			TxD_t *temp;
+			temp = txdlp;
+			txdlp++;
+			for (j = 0; j < frg_cnt; j++, txdlp++) {
+				skb_frag_t *frag =
+				    &skb_shinfo(skb)->frags[j];
+				pci_unmap_page(nic->pdev,
+					       (dma_addr_t)
+					       txdlp->
+					       Buffer_Pointer,
+					       frag->size,
+					       PCI_DMA_TODEVICE);
+			}
+			txdlp = temp;
+		}
+		memset(txdlp, 0,
+		       (sizeof(TxD_t) * fifo_data->max_txds));
+
+		/* Updating the statistics block */
+		nic->stats.tx_packets++;
+		nic->stats.tx_bytes += skb->len;
+		dev_kfree_skb_irq(skb);
+
+		get_info.offset++;
+		get_info.offset %= get_info.fifo_len + 1;
+		txdlp = (TxD_t *) fifo_data->list_info
+		    [get_info.offset].list_virt_addr;
+		fifo_data->tx_curr_get_info.offset =
+		    get_info.offset;
 	}
 
 	spin_lock(&nic->tx_lock);
@@ -2301,13 +2128,13 @@
 	spin_unlock(&nic->tx_lock);
 }
 
-/**  
+/**
  *  alarm_intr_handler - Alarm Interrrupt handler
  *  @nic: device private variable
- *  Description: If the interrupt was neither because of Rx packet or Tx 
+ *  Description: If the interrupt was neither because of Rx packet or Tx
  *  complete, this function is called. If the interrupt was to indicate
- *  a loss of link, the OSM link status handler is invoked for any other 
- *  alarm interrupt the block that raised the interrupt is displayed 
+ *  a loss of link, the OSM link status handler is invoked for any other
+ *  alarm interrupt the block that raised the interrupt is displayed
  *  and a H/W reset is issued.
  *  Return Value:
  *  NONE
@@ -2338,7 +2165,7 @@
 	/*
 	 * Also as mentioned in the latest Errata sheets if the PCC_FB_ECC
 	 * Error occurs, the adapter will be recycled by disabling the
-	 * adapter enable bit and enabling it again after the device 
+	 * adapter enable bit and enabling it again after the device
 	 * becomes Quiescent.
 	 */
 	val64 = readq(&bar0->pcc_err_reg);
@@ -2354,18 +2181,18 @@
 	/* Other type of interrupts are not being handled now,  TODO */
 }
 
-/** 
+/**
  *  wait_for_cmd_complete - waits for a command to complete.
- *  @sp : private member of the device structure, which is a pointer to the 
+ *  @sp : private member of the device structure, which is a pointer to the
  *  s2io_nic structure.
- *  Description: Function that waits for a command to Write into RMAC 
- *  ADDR DATA registers to be completed and returns either success or 
- *  error depending on whether the command was complete or not. 
+ *  Description: Function that waits for a command to Write into RMAC
+ *  ADDR DATA registers to be completed and returns either success or
+ *  error depending on whether the command was complete or not.
  *  Return value:
  *   SUCCESS on success and FAILURE on failure.
  */
 
-static int wait_for_cmd_complete(nic_t * sp)
+int wait_for_cmd_complete(nic_t * sp)
 {
 	XENA_dev_config_t __iomem *bar0 = sp->bar0;
 	int ret = FAILURE, cnt = 0;
@@ -2385,17 +2212,17 @@
 	return ret;
 }
 
-/** 
- *  s2io_reset - Resets the card. 
+/**
+ *  s2io_reset - Resets the card.
  *  @sp : private member of the device structure.
  *  Description: Function to Reset the card. This function then also
- *  restores the previously saved PCI configuration space registers as 
+ *  restores the previously saved PCI configuration space registers as
  *  the card reset also resets the configuration space.
  *  Return value:
  *  void.
  */
 
-static void s2io_reset(nic_t * sp)
+void s2io_reset(nic_t * sp)
 {
 	XENA_dev_config_t __iomem *bar0 = sp->bar0;
 	u64 val64;
@@ -2404,10 +2231,10 @@
 	val64 = SW_RESET_ALL;
 	writeq(val64, &bar0->sw_reset);
 
-	/* 
-	 * At this stage, if the PCI write is indeed completed, the 
-	 * card is reset and so is the PCI Config space of the device. 
-	 * So a read cannot be issued at this stage on any of the 
+	/*
+	 * At this stage, if the PCI write is indeed completed, the
+	 * card is reset and so is the PCI Config space of the device.
+	 * So a read cannot be issued at this stage on any of the
 	 * registers to ensure the write into "sw_reset" register
 	 * has gone through.
 	 * Question: Is there any system call that will explicitly force
@@ -2420,10 +2247,17 @@
 
 	/* Restore the PCI state saved during initializarion. */
 	pci_restore_state(sp->pdev);
+
 	s2io_init_pci(sp);
 
 	msleep(250);
 
+	/* Set swapper to enable I/O register access */
+	s2io_set_swapper(sp);
+
+	/* Reset device statistics maintained by OS */
+	memset(&sp->stats, 0, sizeof (struct net_device_stats));
+
 	/* SXE-002: Configure link and activity LED to turn it off */
 	subid = sp->pdev->subsystem_device;
 	if ((subid & 0xFF) >= 0x07) {
@@ -2431,29 +2265,29 @@
 		val64 |= 0x0000800000000000ULL;
 		writeq(val64, &bar0->gpio_control);
 		val64 = 0x0411040400000000ULL;
-		writeq(val64, (void __iomem *) bar0 + 0x2700);
+		writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
 	}
 
 	sp->device_enabled_once = FALSE;
 }
 
 /**
- *  s2io_set_swapper - to set the swapper controle on the card 
- *  @sp : private member of the device structure, 
+ *  s2io_set_swapper - to set the swapper controle on the card
+ *  @sp : private member of the device structure,
  *  pointer to the s2io_nic structure.
- *  Description: Function to set the swapper control on the card 
+ *  Description: Function to set the swapper control on the card
  *  correctly depending on the 'endianness' of the system.
  *  Return value:
  *  SUCCESS on success and FAILURE on failure.
  */
 
-static int s2io_set_swapper(nic_t * sp)
+int s2io_set_swapper(nic_t * sp)
 {
 	struct net_device *dev = sp->dev;
 	XENA_dev_config_t __iomem *bar0 = sp->bar0;
 	u64 val64, valt, valr;
 
-	/* 
+	/*
 	 * Set proper endian settings and verify the same by reading
 	 * the PIF Feed-back register.
 	 */
@@ -2505,8 +2339,9 @@
 			i++;
 		}
 		if(i == 4) {
+			unsigned long long x = val64;
 			DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr ");
-			DBG_PRINT(ERR_DBG, "reads:0x%llx\n",val64);
+			DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x);
 			return FAILURE;
 		}
 	}
@@ -2514,8 +2349,8 @@
 	val64 &= 0xFFFF000000000000ULL;
 
 #ifdef  __BIG_ENDIAN
-	/* 
-	 * The device by default set to a big endian format, so a 
+	/*
+	 * The device by default set to a big endian format, so a
 	 * big endian driver need not set anything.
 	 */
 	val64 |= (SWAPPER_CTRL_TXP_FE |
@@ -2531,9 +2366,9 @@
 		 SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
 	writeq(val64, &bar0->swapper_ctrl);
 #else
-	/* 
+	/*
 	 * Initially we enable all bits to make it accessible by the
-	 * driver, then we selectively enable only those bits that 
+	 * driver, then we selectively enable only those bits that
 	 * we want to set.
 	 */
 	val64 |= (SWAPPER_CTRL_TXP_FE |
@@ -2555,8 +2390,8 @@
 #endif
 	val64 = readq(&bar0->swapper_ctrl);
 
-	/* 
-	 * Verifying if endian settings are accurate by reading a 
+	/*
+	 * Verifying if endian settings are accurate by reading a
 	 * feedback register.
 	 */
 	val64 = readq(&bar0->pif_rd_swapper_fb);
@@ -2576,25 +2411,25 @@
  * Functions defined below concern the OS part of the driver *
  * ********************************************************* */
 
-/**  
+/**
  *  s2io_open - open entry point of the driver
  *  @dev : pointer to the device structure.
  *  Description:
  *  This function is the open entry point of the driver. It mainly calls a
  *  function to allocate Rx buffers and inserts them into the buffer
- *  descriptors and then enables the Rx part of the NIC. 
+ *  descriptors and then enables the Rx part of the NIC.
  *  Return value:
  *  0 on success and an appropriate (-)ve integer as defined in errno.h
  *   file on failure.
  */
 
-static int s2io_open(struct net_device *dev)
+int s2io_open(struct net_device *dev)
 {
 	nic_t *sp = dev->priv;
 	int err = 0;
 
-	/* 
-	 * Make sure you have link off by default every time 
+	/*
+	 * Make sure you have link off by default every time
 	 * Nic is initialized
 	 */
 	netif_carrier_off(dev);
@@ -2604,27 +2439,34 @@
 	if (s2io_card_up(sp)) {
 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
 			  dev->name);
-		return -ENODEV;
+		err = -ENODEV;
+		goto hw_init_failed;
 	}
 
 	/* After proper initialization of H/W, register ISR */
-	err = request_irq((int) sp->irq, s2io_isr, SA_SHIRQ,
+	err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
 			  sp->name, dev);
 	if (err) {
-		s2io_reset(sp);
 		DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
 			  dev->name);
-		return err;
+		goto isr_registration_failed;
 	}
 
 	if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
 		DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
-		s2io_reset(sp);
-		return -ENODEV;
+		err = -ENODEV;
+		goto setting_mac_address_failed;
 	}
 
 	netif_start_queue(dev);
 	return 0;
+
+setting_mac_address_failed:
+	free_irq(sp->pdev->irq, dev);
+isr_registration_failed:
+	s2io_reset(sp);
+hw_init_failed:
+	return err;
 }
 
 /**
@@ -2640,16 +2482,15 @@
  *  file on failure.
  */
 
-static int s2io_close(struct net_device *dev)
+int s2io_close(struct net_device *dev)
 {
 	nic_t *sp = dev->priv;
-
 	flush_scheduled_work();
 	netif_stop_queue(dev);
 	/* Reset card, kill tasklet and free Tx and Rx buffers. */
 	s2io_card_down(sp);
 
-	free_irq(dev->irq, dev);
+	free_irq(sp->pdev->irq, dev);
 	sp->device_close_flag = TRUE;	/* Device is shut down. */
 	return 0;
 }
@@ -2667,7 +2508,7 @@
  *  0 on success & 1 on failure.
  */
 
-static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
+int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	nic_t *sp = dev->priv;
 	u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
@@ -2685,22 +2526,24 @@
 	mac_control = &sp->mac_control;
 	config = &sp->config;
 
-	DBG_PRINT(TX_DBG, "%s: In S2IO Tx routine\n", dev->name);
+	DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
 	spin_lock_irqsave(&sp->tx_lock, flags);
-
 	if (atomic_read(&sp->card_state) == CARD_DOWN) {
-		DBG_PRINT(ERR_DBG, "%s: Card going down for reset\n",
+		DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
 			  dev->name);
 		spin_unlock_irqrestore(&sp->tx_lock, flags);
-		return 1;
+		dev_kfree_skb(skb);
+		return 0;
 	}
 
 	queue = 0;
-	put_off = (u16) mac_control->tx_curr_put_info[queue].offset;
-	get_off = (u16) mac_control->tx_curr_get_info[queue].offset;
-	txdp = (TxD_t *) sp->list_info[queue][put_off].list_virt_addr;
 
-	queue_len = mac_control->tx_curr_put_info[queue].fifo_len + 1;
+	put_off = (u16) mac_control->fifos[queue].tx_curr_put_info.offset;
+	get_off = (u16) mac_control->fifos[queue].tx_curr_get_info.offset;
+	txdp = (TxD_t *) mac_control->fifos[queue].list_info[put_off].
+		list_virt_addr;
+
+	queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
 	/* Avoid "put" pointer going beyond "get" pointer */
 	if (txdp->Host_Control || (((put_off + 1) % queue_len) == get_off)) {
 		DBG_PRINT(ERR_DBG, "Error in xmit, No free TXDs.\n");
@@ -2720,9 +2563,9 @@
 	frg_cnt = skb_shinfo(skb)->nr_frags;
 	frg_len = skb->len - skb->data_len;
 
-	txdp->Host_Control = (unsigned long) skb;
 	txdp->Buffer_Pointer = pci_map_single
 	    (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
+	txdp->Host_Control = (unsigned long) skb;
 	if (skb->ip_summed == CHECKSUM_HW) {
 		txdp->Control_2 |=
 		    (TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
@@ -2747,11 +2590,12 @@
 	txdp->Control_1 |= TXD_GATHER_CODE_LAST;
 
 	tx_fifo = mac_control->tx_FIFO_start[queue];
-	val64 = sp->list_info[queue][put_off].list_phy_addr;
+	val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr;
 	writeq(val64, &tx_fifo->TxDL_Pointer);
 
 	val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
 		 TX_FIFO_LAST_LIST);
+
 #ifdef NETIF_F_TSO
 	if (mss)
 		val64 |= TX_FIFO_SPECIAL_FUNC;
@@ -2762,8 +2606,8 @@
 	val64 = readq(&bar0->general_int_status);
 
 	put_off++;
-	put_off %= mac_control->tx_curr_put_info[queue].fifo_len + 1;
-	mac_control->tx_curr_put_info[queue].offset = put_off;
+	put_off %= mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
+	mac_control->fifos[queue].tx_curr_put_info.offset = put_off;
 
 	/* Avoid "put" pointer going beyond "get" pointer */
 	if (((put_off + 1) % queue_len) == get_off) {
@@ -2784,13 +2628,13 @@
  *  @irq: the irq of the device.
  *  @dev_id: a void pointer to the dev structure of the NIC.
  *  @pt_regs: pointer to the registers pushed on the stack.
- *  Description:  This function is the ISR handler of the device. It 
- *  identifies the reason for the interrupt and calls the relevant 
- *  service routines. As a contongency measure, this ISR allocates the 
+ *  Description:  This function is the ISR handler of the device. It
+ *  identifies the reason for the interrupt and calls the relevant
+ *  service routines. As a contongency measure, this ISR allocates the
  *  recv buffers, if their numbers are below the panic value which is
  *  presently set to 25% of the original number of rcv buffers allocated.
  *  Return value:
- *   IRQ_HANDLED: will be returned if IRQ was handled by this routine 
+ *   IRQ_HANDLED: will be returned if IRQ was handled by this routine
  *   IRQ_NONE: will be returned if interrupt is not from our device
  */
 static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
@@ -2798,9 +2642,7 @@
 	struct net_device *dev = (struct net_device *) dev_id;
 	nic_t *sp = dev->priv;
 	XENA_dev_config_t __iomem *bar0 = sp->bar0;
-#ifndef CONFIG_S2IO_NAPI
-	int i, ret;
-#endif
+	int i;
 	u64 reason = 0;
 	mac_info_t *mac_control;
 	struct config_param *config;
@@ -2808,13 +2650,13 @@
 	mac_control = &sp->mac_control;
 	config = &sp->config;
 
-	/* 
+	/*
 	 * Identify the cause for interrupt and call the appropriate
 	 * interrupt handler. Causes for the interrupt could be;
 	 * 1. Rx of packet.
 	 * 2. Tx complete.
 	 * 3. Link down.
-	 * 4. Error in any functional blocks of the NIC. 
+	 * 4. Error in any functional blocks of the NIC.
 	 */
 	reason = readq(&bar0->general_int_status);
 
@@ -2823,12 +2665,6 @@
 		return IRQ_NONE;
 	}
 
-	/* If Intr is because of Tx Traffic */
-	if (reason & GEN_INTR_TXTRAFFIC) {
-		tx_intr_handler(sp);
-	}
-
-	/* If Intr is because of an error */
 	if (reason & (GEN_ERROR_INTR))
 		alarm_intr_handler(sp);
 
@@ -2843,17 +2679,26 @@
 #else
 	/* If Intr is because of Rx Traffic */
 	if (reason & GEN_INTR_RXTRAFFIC) {
-		rx_intr_handler(sp);
+		for (i = 0; i < config->rx_ring_num; i++) {
+			rx_intr_handler(&mac_control->rings[i]);
+		}
 	}
 #endif
 
-	/* 
-	 * If the Rx buffer count is below the panic threshold then 
-	 * reallocate the buffers from the interrupt handler itself, 
+	/* If Intr is because of Tx Traffic */
+	if (reason & GEN_INTR_TXTRAFFIC) {
+		for (i = 0; i < config->tx_fifo_num; i++)
+			tx_intr_handler(&mac_control->fifos[i]);
+	}
+
+	/*
+	 * If the Rx buffer count is below the panic threshold then
+	 * reallocate the buffers from the interrupt handler itself,
 	 * else schedule a tasklet to reallocate the buffers.
 	 */
 #ifndef CONFIG_S2IO_NAPI
 	for (i = 0; i < config->rx_ring_num; i++) {
+		int ret;
 		int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
 		int level = rx_buffer_level(sp, rxb_size, i);
 
@@ -2878,29 +2723,33 @@
 }
 
 /**
- *  s2io_get_stats - Updates the device statistics structure. 
+ *  s2io_get_stats - Updates the device statistics structure.
  *  @dev : pointer to the device structure.
  *  Description:
- *  This function updates the device statistics structure in the s2io_nic 
+ *  This function updates the device statistics structure in the s2io_nic
  *  structure and returns a pointer to the same.
  *  Return value:
  *  pointer to the updated net_device_stats structure.
  */
 
-static struct net_device_stats *s2io_get_stats(struct net_device *dev)
+struct net_device_stats *s2io_get_stats(struct net_device *dev)
 {
 	nic_t *sp = dev->priv;
 	mac_info_t *mac_control;
 	struct config_param *config;
 
+
 	mac_control = &sp->mac_control;
 	config = &sp->config;
 
-	sp->stats.tx_errors = mac_control->stats_info->tmac_any_err_frms;
-	sp->stats.rx_errors = mac_control->stats_info->rmac_drop_frms;
-	sp->stats.multicast = mac_control->stats_info->rmac_vld_mcst_frms;
+	sp->stats.tx_errors =
+		le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
+	sp->stats.rx_errors =
+		le32_to_cpu(mac_control->stats_info->rmac_drop_frms);
+	sp->stats.multicast =
+		le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
 	sp->stats.rx_length_errors =
-	    mac_control->stats_info->rmac_long_frms;
+		le32_to_cpu(mac_control->stats_info->rmac_long_frms);
 
 	return (&sp->stats);
 }
@@ -2909,8 +2758,8 @@
  *  s2io_set_multicast - entry point for multicast address enable/disable.
  *  @dev : pointer to the device structure
  *  Description:
- *  This function is a driver entry point which gets called by the kernel 
- *  whenever multicast addresses must be enabled/disabled. This also gets 
+ *  This function is a driver entry point which gets called by the kernel
+ *  whenever multicast addresses must be enabled/disabled. This also gets
  *  called to set/reset promiscuous mode. Depending on the deivce flag, we
  *  determine, if multicast address must be enabled or if promiscuous mode
  *  is to be disabled etc.
@@ -3010,7 +2859,7 @@
 			writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
 			       &bar0->rmac_addr_data0_mem);
 			writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
-		       		&bar0->rmac_addr_data1_mem);
+				&bar0->rmac_addr_data1_mem);
 			val64 = RMAC_ADDR_CMD_MEM_WE |
 			    RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
 			    RMAC_ADDR_CMD_MEM_OFFSET
@@ -3039,8 +2888,7 @@
 			writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
 			       &bar0->rmac_addr_data0_mem);
 			writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
-		       		&bar0->rmac_addr_data1_mem);
-
+				&bar0->rmac_addr_data1_mem);
 			val64 = RMAC_ADDR_CMD_MEM_WE |
 			    RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
 			    RMAC_ADDR_CMD_MEM_OFFSET
@@ -3059,12 +2907,12 @@
 }
 
 /**
- *  s2io_set_mac_addr - Programs the Xframe mac address 
+ *  s2io_set_mac_addr - Programs the Xframe mac address
  *  @dev : pointer to the device structure.
  *  @addr: a uchar pointer to the new mac address which is to be set.
- *  Description : This procedure will program the Xframe to receive 
+ *  Description : This procedure will program the Xframe to receive
  *  frames with new Mac Address
- *  Return value: SUCCESS on success and an appropriate (-)ve integer 
+ *  Return value: SUCCESS on success and an appropriate (-)ve integer
  *  as defined in errno.h file on failure.
  */
 
@@ -3075,10 +2923,10 @@
 	register u64 val64, mac_addr = 0;
 	int i;
 
-	/* 
+	/*
 	 * Set the new MAC address as the new unicast filter and reflect this
 	 * change on the device address registered with the OS. It will be
-	 * at offset 0. 
+	 * at offset 0.
 	 */
 	for (i = 0; i < ETH_ALEN; i++) {
 		mac_addr <<= 8;
@@ -3102,12 +2950,12 @@
 }
 
 /**
- * s2io_ethtool_sset - Sets different link parameters. 
+ * s2io_ethtool_sset - Sets different link parameters.
  * @sp : private member of the device structure, which is a pointer to the  * s2io_nic structure.
  * @info: pointer to the structure with parameters given by ethtool to set
  * link information.
  * Description:
- * The function sets different link parameters provided by the user onto 
+ * The function sets different link parameters provided by the user onto
  * the NIC.
  * Return value:
  * 0 on success.
@@ -3129,7 +2977,7 @@
 }
 
 /**
- * s2io_ethtol_gset - Return link specific information. 
+ * s2io_ethtol_gset - Return link specific information.
  * @sp : private member of the device structure, pointer to the
  *      s2io_nic structure.
  * @info : pointer to the structure with parameters given by ethtool
@@ -3161,8 +3009,8 @@
 }
 
 /**
- * s2io_ethtool_gdrvinfo - Returns driver specific information. 
- * @sp : private member of the device structure, which is a pointer to the 
+ * s2io_ethtool_gdrvinfo - Returns driver specific information.
+ * @sp : private member of the device structure, which is a pointer to the
  * s2io_nic structure.
  * @info : pointer to the structure with parameters given by ethtool to
  * return driver information.
@@ -3190,9 +3038,9 @@
 
 /**
  *  s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
- *  @sp: private member of the device structure, which is a pointer to the 
+ *  @sp: private member of the device structure, which is a pointer to the
  *  s2io_nic structure.
- *  @regs : pointer to the structure with parameters given by ethtool for 
+ *  @regs : pointer to the structure with parameters given by ethtool for
  *  dumping the registers.
  *  @reg_space: The input argumnet into which all the registers are dumped.
  *  Description:
@@ -3221,11 +3069,11 @@
 
 /**
  *  s2io_phy_id  - timer function that alternates adapter LED.
- *  @data : address of the private member of the device structure, which 
+ *  @data : address of the private member of the device structure, which
  *  is a pointer to the s2io_nic structure, provided as an u32.
- * Description: This is actually the timer function that alternates the 
- * adapter LED bit of the adapter control bit to set/reset every time on 
- * invocation. The timer is set for 1/2 a second, hence tha NIC blinks 
+ * Description: This is actually the timer function that alternates the
+ * adapter LED bit of the adapter control bit to set/reset every time on
+ * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
  *  once every second.
 */
 static void s2io_phy_id(unsigned long data)
@@ -3253,12 +3101,12 @@
  * s2io_ethtool_idnic - To physically identify the nic on the system.
  * @sp : private member of the device structure, which is a pointer to the
  * s2io_nic structure.
- * @id : pointer to the structure with identification parameters given by 
+ * @id : pointer to the structure with identification parameters given by
  * ethtool.
  * Description: Used to physically identify the NIC on the system.
- * The Link LED will blink for a time specified by the user for 
+ * The Link LED will blink for a time specified by the user for
  * identification.
- * NOTE: The Link has to be Up to be able to blink the LED. Hence 
+ * NOTE: The Link has to be Up to be able to blink the LED. Hence
  * identification is possible only if it's link is up.
  * Return value:
  * int , returns 0 on success
@@ -3288,9 +3136,9 @@
 	}
 	mod_timer(&sp->id_timer, jiffies);
 	if (data)
-		msleep(data * 1000);
+		msleep_interruptible(data * HZ);
 	else
-		msleep(0xFFFFFFFF);
+		msleep_interruptible(MAX_FLICKER_TIME);
 	del_timer_sync(&sp->id_timer);
 
 	if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
@@ -3303,7 +3151,8 @@
 
 /**
  * s2io_ethtool_getpause_data -Pause frame frame generation and reception.
- * @sp : private member of the device structure, which is a pointer to the  * s2io_nic structure.
+ * @sp : private member of the device structure, which is a pointer to the
+ *	s2io_nic structure.
  * @ep : pointer to the structure with pause parameters given by ethtool.
  * Description:
  * Returns the Pause frame generation and reception capability of the NIC.
@@ -3327,7 +3176,7 @@
 
 /**
  * s2io_ethtool_setpause_data -  set/reset pause frame generation.
- * @sp : private member of the device structure, which is a pointer to the 
+ * @sp : private member of the device structure, which is a pointer to the
  *      s2io_nic structure.
  * @ep : pointer to the structure with pause parameters given by ethtool.
  * Description:
@@ -3338,7 +3187,7 @@
  */
 
 static int s2io_ethtool_setpause_data(struct net_device *dev,
-				      struct ethtool_pauseparam *ep)
+			       struct ethtool_pauseparam *ep)
 {
 	u64 val64;
 	nic_t *sp = dev->priv;
@@ -3359,13 +3208,13 @@
 
 /**
  * read_eeprom - reads 4 bytes of data from user given offset.
- * @sp : private member of the device structure, which is a pointer to the 
+ * @sp : private member of the device structure, which is a pointer to the
  *      s2io_nic structure.
  * @off : offset at which the data must be written
  * @data : Its an output parameter where the data read at the given
- * 	offset is stored.
+ *	offset is stored.
  * Description:
- * Will read 4 bytes of data from the user given offset and return the 
+ * Will read 4 bytes of data from the user given offset and return the
  * read data.
  * NOTE: Will allow to read only part of the EEPROM visible through the
  *   I2C bus.
@@ -3406,7 +3255,7 @@
  *       s2io_nic structure.
  *  @off : offset at which the data must be written
  *  @data : The data that is to be written
- *  @cnt : Number of bytes of the data that are actually to be written into 
+ *  @cnt : Number of bytes of the data that are actually to be written into
  *  the Eeprom. (max of 3)
  * Description:
  *  Actually writes the relevant part of the data value into the Eeprom
@@ -3443,7 +3292,7 @@
 /**
  *  s2io_ethtool_geeprom  - reads the value stored in the Eeprom.
  *  @sp : private member of the device structure, which is a pointer to the *       s2io_nic structure.
- *  @eeprom : pointer to the user level structure provided by ethtool, 
+ *  @eeprom : pointer to the user level structure provided by ethtool,
  *  containing all relevant information.
  *  @data_buf : user defined value to be written into Eeprom.
  *  Description: Reads the values stored in the Eeprom at given offset
@@ -3454,7 +3303,7 @@
  */
 
 static int s2io_ethtool_geeprom(struct net_device *dev,
-				struct ethtool_eeprom *eeprom, u8 * data_buf)
+			 struct ethtool_eeprom *eeprom, u8 * data_buf)
 {
 	u32 data, i, valid;
 	nic_t *sp = dev->priv;
@@ -3479,7 +3328,7 @@
  *  s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
  *  @sp : private member of the device structure, which is a pointer to the
  *  s2io_nic structure.
- *  @eeprom : pointer to the user level structure provided by ethtool, 
+ *  @eeprom : pointer to the user level structure provided by ethtool,
  *  containing all relevant information.
  *  @data_buf ; user defined value to be written into Eeprom.
  *  Description:
@@ -3527,8 +3376,8 @@
 }
 
 /**
- * s2io_register_test - reads and writes into all clock domains. 
- * @sp : private member of the device structure, which is a pointer to the 
+ * s2io_register_test - reads and writes into all clock domains.
+ * @sp : private member of the device structure, which is a pointer to the
  * s2io_nic structure.
  * @data : variable that returns the result of each of the test conducted b
  * by the driver.
@@ -3545,8 +3394,8 @@
 	u64 val64 = 0;
 	int fail = 0;
 
-	val64 = readq(&bar0->pcc_enable);
-	if (val64 != 0xff00000000000000ULL) {
+	val64 = readq(&bar0->pif_rd_swapper_fb);
+	if (val64 != 0x123456789abcdefULL) {
 		fail = 1;
 		DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n");
 	}
@@ -3590,13 +3439,13 @@
 }
 
 /**
- * s2io_eeprom_test - to verify that EEprom in the xena can be programmed. 
+ * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
  * @sp : private member of the device structure, which is a pointer to the
  * s2io_nic structure.
  * @data:variable that returns the result of each of the test conducted by
  * the driver.
  * Description:
- * Verify that EEPROM in the xena can be programmed using I2C_CONTROL 
+ * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
  * register.
  * Return value:
  * 0 on success.
@@ -3661,14 +3510,14 @@
 
 /**
  * s2io_bist_test - invokes the MemBist test of the card .
- * @sp : private member of the device structure, which is a pointer to the 
+ * @sp : private member of the device structure, which is a pointer to the
  * s2io_nic structure.
- * @data:variable that returns the result of each of the test conducted by 
+ * @data:variable that returns the result of each of the test conducted by
  * the driver.
  * Description:
  * This invokes the MemBist test of the card. We give around
  * 2 secs time for the Test to complete. If it's still not complete
- * within this peiod, we consider that the test failed. 
+ * within this peiod, we consider that the test failed.
  * Return value:
  * 0 on success and -1 on failure.
  */
@@ -3697,13 +3546,13 @@
 }
 
 /**
- * s2io-link_test - verifies the link state of the nic  
- * @sp ; private member of the device structure, which is a pointer to the 
+ * s2io-link_test - verifies the link state of the nic
+ * @sp ; private member of the device structure, which is a pointer to the
  * s2io_nic structure.
  * @data: variable that returns the result of each of the test conducted by
  * the driver.
  * Description:
- * The function verifies the link state of the NIC and updates the input 
+ * The function verifies the link state of the NIC and updates the input
  * argument 'data' appropriately.
  * Return value:
  * 0 on success.
@@ -3722,13 +3571,13 @@
 }
 
 /**
- * s2io_rldram_test - offline test for access to the RldRam chip on the NIC 
- * @sp - private member of the device structure, which is a pointer to the  
+ * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
+ * @sp - private member of the device structure, which is a pointer to the
  * s2io_nic structure.
- * @data - variable that returns the result of each of the test 
+ * @data - variable that returns the result of each of the test
  * conducted by the driver.
  * Description:
- *  This is one of the offline test that tests the read and write 
+ *  This is one of the offline test that tests the read and write
  *  access to the RldRam chip on the NIC.
  * Return value:
  *  0 on success.
@@ -3833,7 +3682,7 @@
  *  s2io_nic structure.
  *  @ethtest : pointer to a ethtool command specific structure that will be
  *  returned to the user.
- *  @data : variable that returns the result of each of the test 
+ *  @data : variable that returns the result of each of the test
  * conducted by the driver.
  * Description:
  *  This function conducts 6 tests ( 4 offline and 2 online) to determine
@@ -3851,23 +3700,18 @@
 
 	if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
 		/* Offline Tests. */
-		if (orig_state) {
+		if (orig_state)
 			s2io_close(sp->dev);
-			s2io_set_swapper(sp);
-		} else
-			s2io_set_swapper(sp);
 
 		if (s2io_register_test(sp, &data[0]))
 			ethtest->flags |= ETH_TEST_FL_FAILED;
 
 		s2io_reset(sp);
-		s2io_set_swapper(sp);
 
 		if (s2io_rldram_test(sp, &data[3]))
 			ethtest->flags |= ETH_TEST_FL_FAILED;
 
 		s2io_reset(sp);
-		s2io_set_swapper(sp);
 
 		if (s2io_eeprom_test(sp, &data[1]))
 			ethtest->flags |= ETH_TEST_FL_FAILED;
@@ -3951,20 +3795,19 @@
 	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp);
 }
 
-static int s2io_ethtool_get_regs_len(struct net_device *dev)
+int s2io_ethtool_get_regs_len(struct net_device *dev)
 {
 	return (XENA_REG_SPACE);
 }
 
 
-static u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
+u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
 {
 	nic_t *sp = dev->priv;
 
 	return (sp->rx_csum);
 }
-
-static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
+int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
 {
 	nic_t *sp = dev->priv;
 
@@ -3975,19 +3818,17 @@
 
 	return 0;
 }
-
-static int s2io_get_eeprom_len(struct net_device *dev)
+int s2io_get_eeprom_len(struct net_device *dev)
 {
 	return (XENA_EEPROM_SPACE);
 }
 
-static int s2io_ethtool_self_test_count(struct net_device *dev)
+int s2io_ethtool_self_test_count(struct net_device *dev)
 {
 	return (S2IO_TEST_LEN);
 }
-
-static void s2io_ethtool_get_strings(struct net_device *dev,
-				     u32 stringset, u8 * data)
+void s2io_ethtool_get_strings(struct net_device *dev,
+			      u32 stringset, u8 * data)
 {
 	switch (stringset) {
 	case ETH_SS_TEST:
@@ -3998,13 +3839,12 @@
 		       sizeof(ethtool_stats_keys));
 	}
 }
-
 static int s2io_ethtool_get_stats_count(struct net_device *dev)
 {
 	return (S2IO_STAT_LEN);
 }
 
-static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
+int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
 {
 	if (data)
 		dev->features |= NETIF_F_IP_CSUM;
@@ -4046,21 +3886,18 @@
 };
 
 /**
- *  s2io_ioctl - Entry point for the Ioctl 
+ *  s2io_ioctl - Entry point for the Ioctl
  *  @dev :  Device pointer.
  *  @ifr :  An IOCTL specefic structure, that can contain a pointer to
  *  a proprietary structure used to pass information to the driver.
  *  @cmd :  This is used to distinguish between the different commands that
  *  can be passed to the IOCTL functions.
  *  Description:
- *  This function has support for ethtool, adding multiple MAC addresses on 
- *  the NIC and some DBG commands for the util tool.
- *  Return value:
- *  Currently the IOCTL supports no operations, hence by default this
- *  function returns OP NOT SUPPORTED value.
+ *  Currently there are no special functionality supported in IOCTL, hence
+ *  function always return EOPNOTSUPPORTED
  */
 
-static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
 	return -EOPNOTSUPP;
 }
@@ -4076,7 +3913,7 @@
  *   file on failure.
  */
 
-static int s2io_change_mtu(struct net_device *dev, int new_mtu)
+int s2io_change_mtu(struct net_device *dev, int new_mtu)
 {
 	nic_t *sp = dev->priv;
 	XENA_dev_config_t __iomem *bar0 = sp->bar0;
@@ -4084,7 +3921,7 @@
 
 	if (netif_running(dev)) {
 		DBG_PRINT(ERR_DBG, "%s: Must be stopped to ", dev->name);
-		DBG_PRINT(ERR_DBG, "change its MTU \n");
+		DBG_PRINT(ERR_DBG, "change its MTU\n");
 		return -EBUSY;
 	}
 
@@ -4108,9 +3945,9 @@
  *  @dev_adr : address of the device structure in dma_addr_t format.
  *  Description:
  *  This is the tasklet or the bottom half of the ISR. This is
- *  an extension of the ISR which is scheduled by the scheduler to be run 
+ *  an extension of the ISR which is scheduled by the scheduler to be run
  *  when the load on the CPU is low. All low priority tasks of the ISR can
- *  be pushed into the tasklet. For now the tasklet is used only to 
+ *  be pushed into the tasklet. For now the tasklet is used only to
  *  replenish the Rx buffers in the Rx buffer descriptors.
  *  Return value:
  *  void.
@@ -4166,14 +4003,14 @@
 	}
 
 	subid = nic->pdev->subsystem_device;
-	/* 
-	 * Allow a small delay for the NICs self initiated 
+	/*
+	 * Allow a small delay for the NICs self initiated
 	 * cleanup to complete.
 	 */
 	msleep(100);
 
 	val64 = readq(&bar0->adapter_status);
-	if (verify_xena_quiescence(val64, nic->device_enabled_once)) {
+	if (verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
 		if (LINK_IS_UP(val64)) {
 			val64 = readq(&bar0->adapter_control);
 			val64 |= ADAPTER_CNTL_EN;
@@ -4224,8 +4061,9 @@
 	register u64 val64 = 0;
 
 	/* If s2io_set_link task is executing, wait till it completes. */
-	while (test_and_set_bit(0, &(sp->link_state)))
+	while (test_and_set_bit(0, &(sp->link_state))) {
 		msleep(50);
+	}
 	atomic_set(&sp->card_state, CARD_DOWN);
 
 	/* disable Tx and Rx traffic on the NIC */
@@ -4237,7 +4075,7 @@
 	/* Check if the device is Quiescent and then Reset the NIC */
 	do {
 		val64 = readq(&bar0->adapter_status);
-		if (verify_xena_quiescence(val64, sp->device_enabled_once)) {
+		if (verify_xena_quiescence(sp, val64, sp->device_enabled_once)) {
 			break;
 		}
 
@@ -4276,8 +4114,8 @@
 		return -ENODEV;
 	}
 
-	/* 
-	 * Initializing the Rx buffers. For now we are considering only 1 
+	/*
+	 * Initializing the Rx buffers. For now we are considering only 1
 	 * Rx ring and initializing buffers into 30 Rx blocks
 	 */
 	mac_control = &sp->mac_control;
@@ -4315,12 +4153,12 @@
 	return 0;
 }
 
-/** 
+/**
  * s2io_restart_nic - Resets the NIC.
  * @data : long pointer to the device private structure
  * Description:
  * This function is scheduled to be run by the s2io_tx_watchdog
- * function after 0.5 secs to reset the NIC. The idea is to reduce 
+ * function after 0.5 secs to reset the NIC. The idea is to reduce
  * the run time of the watch dog routine which is run holding a
  * spin lock.
  */
@@ -4338,10 +4176,11 @@
 	netif_wake_queue(dev);
 	DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n",
 		  dev->name);
+
 }
 
-/** 
- *  s2io_tx_watchdog - Watchdog for transmit side. 
+/**
+ *  s2io_tx_watchdog - Watchdog for transmit side.
  *  @dev : Pointer to net device structure
  *  Description:
  *  This function is triggered if the Tx Queue is stopped
@@ -4369,7 +4208,7 @@
  *   @len : length of the packet
  *   @cksum : FCS checksum of the frame.
  *   @ring_no : the ring from which this RxD was extracted.
- *   Description: 
+ *   Description:
  *   This function is called by the Tx interrupt serivce routine to perform
  *   some OS related operations on the SKB before passing it to the upper
  *   layers. It mainly checks if the checksum is OK, if so adds it to the
@@ -4379,71 +4218,33 @@
  *   Return value:
  *   SUCCESS on success and -1 on failure.
  */
-#ifndef CONFIG_2BUFF_MODE
-static int rx_osm_handler(nic_t * sp, u16 len, RxD_t * rxdp, int ring_no)
-#else
-static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no,
-			  buffAdd_t * ba)
-#endif
+static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp)
 {
+	nic_t *sp = ring_data->nic;
 	struct net_device *dev = (struct net_device *) sp->dev;
-	struct sk_buff *skb =
-	    (struct sk_buff *) ((unsigned long) rxdp->Host_Control);
+	struct sk_buff *skb = (struct sk_buff *)
+		((unsigned long) rxdp->Host_Control);
+	int ring_no = ring_data->ring_no;
 	u16 l3_csum, l4_csum;
 #ifdef CONFIG_2BUFF_MODE
-	int buf0_len, buf2_len;
+	int buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
+	int buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2);
+	int get_block = ring_data->rx_curr_get_info.block_index;
+	int get_off = ring_data->rx_curr_get_info.offset;
+	buffAdd_t *ba = &ring_data->ba[get_block][get_off];
 	unsigned char *buff;
+#else
+	u16 len = (u16) ((RXD_GET_BUFFER0_SIZE(rxdp->Control_2)) >> 48);;
 #endif
-
-	l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
-	if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && (sp->rx_csum)) {
-		l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
-		if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
-			/* 
-			 * NIC verifies if the Checksum of the received
-			 * frame is Ok or not and accordingly returns
-			 * a flag in the RxD.
-			 */
-			skb->ip_summed = CHECKSUM_UNNECESSARY;
-		} else {
-			/* 
-			 * Packet with erroneous checksum, let the 
-			 * upper layers deal with it.
-			 */
-			skb->ip_summed = CHECKSUM_NONE;
-		}
-	} else {
-		skb->ip_summed = CHECKSUM_NONE;
-	}
-
+	skb->dev = dev;
 	if (rxdp->Control_1 & RXD_T_CODE) {
 		unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
 		DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n",
 			  dev->name, err);
 	}
-#ifdef CONFIG_2BUFF_MODE
-	buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
-	buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2);
-#endif
 
-	skb->dev = dev;
-#ifndef CONFIG_2BUFF_MODE
-	skb_put(skb, len);
-	skb->protocol = eth_type_trans(skb, dev);
-#else
-	buff = skb_push(skb, buf0_len);
-	memcpy(buff, ba->ba_0, buf0_len);
-	skb_put(skb, buf2_len);
-	skb->protocol = eth_type_trans(skb, dev);
-#endif
-
-#ifdef CONFIG_S2IO_NAPI
-	netif_receive_skb(skb);
-#else
-	netif_rx(skb);
-#endif
-
-	dev->last_rx = jiffies;
+	/* Updating statistics */
+	rxdp->Host_Control = 0;
 	sp->rx_pkt_count++;
 	sp->stats.rx_packets++;
 #ifndef CONFIG_2BUFF_MODE
@@ -4452,8 +4253,44 @@
 	sp->stats.rx_bytes += buf0_len + buf2_len;
 #endif
 
+#ifndef CONFIG_2BUFF_MODE
+	skb_put(skb, len);
+#else
+	buff = skb_push(skb, buf0_len);
+	memcpy(buff, ba->ba_0, buf0_len);
+	skb_put(skb, buf2_len);
+#endif
+
+	if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
+	    (sp->rx_csum)) {
+		l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
+		l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
+		if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
+			/*
+			 * NIC verifies if the Checksum of the received
+			 * frame is Ok or not and accordingly returns
+			 * a flag in the RxD.
+			 */
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+		} else {
+			/*
+			 * Packet with erroneous checksum, let the
+			 * upper layers deal with it.
+			 */
+			skb->ip_summed = CHECKSUM_NONE;
+		}
+	} else {
+		skb->ip_summed = CHECKSUM_NONE;
+	}
+
+	skb->protocol = eth_type_trans(skb, dev);
+#ifdef CONFIG_S2IO_NAPI
+	netif_receive_skb(skb);
+#else
+	netif_rx(skb);
+#endif
+	dev->last_rx = jiffies;
 	atomic_dec(&sp->rx_bufs_left[ring_no]);
-	rxdp->Host_Control = 0;
 	return SUCCESS;
 }
 
@@ -4464,13 +4301,13 @@
  *  @link : inidicates whether link is UP/DOWN.
  *  Description:
  *  This function stops/starts the Tx queue depending on whether the link
- *  status of the NIC is is down or up. This is called by the Alarm 
- *  interrupt handler whenever a link change interrupt comes up. 
+ *  status of the NIC is is down or up. This is called by the Alarm
+ *  interrupt handler whenever a link change interrupt comes up.
  *  Return value:
  *  void.
  */
 
-static void s2io_link(nic_t * sp, int link)
+void s2io_link(nic_t * sp, int link)
 {
 	struct net_device *dev = (struct net_device *) sp->dev;
 
@@ -4487,8 +4324,25 @@
 }
 
 /**
- *  s2io_init_pci -Initialization of PCI and PCI-X configuration registers . 
- *  @sp : private member of the device structure, which is a pointer to the 
+ *  get_xena_rev_id - to identify revision ID of xena.
+ *  @pdev : PCI Dev structure
+ *  Description:
+ *  Function to identify the Revision ID of xena.
+ *  Return value:
+ *  returns the revision ID of the device.
+ */
+
+int get_xena_rev_id(struct pci_dev *pdev)
+{
+	u8 id = 0;
+	int ret;
+	ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id);
+	return id;
+}
+
+/**
+ *  s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
+ *  @sp : private member of the device structure, which is a pointer to the
  *  s2io_nic structure.
  *  Description:
  *  This function initializes a few of the PCI and PCI-X configuration registers
@@ -4499,15 +4353,15 @@
 
 static void s2io_init_pci(nic_t * sp)
 {
-	u16 pci_cmd = 0;
+	u16 pci_cmd = 0, pcix_cmd = 0;
 
 	/* Enable Data Parity Error Recovery in PCI-X command register. */
 	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			     &(sp->pcix_cmd));
+			     &(pcix_cmd));
 	pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			      (sp->pcix_cmd | 1));
+			      (pcix_cmd | 1));
 	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			     &(sp->pcix_cmd));
+			     &(pcix_cmd));
 
 	/* Set the PErr Response bit in PCI command register. */
 	pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
@@ -4516,34 +4370,36 @@
 	pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
 
 	/* Set MMRB count to 1024 in PCI-X Command register. */
-	sp->pcix_cmd &= 0xFFF3;
-	pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, (sp->pcix_cmd | (0x1 << 2)));	/* MMRBC 1K */
+	pcix_cmd &= 0xFFF3;
+	pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
+			      (pcix_cmd | (0x1 << 2)));	/* MMRBC 1K */
 	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			     &(sp->pcix_cmd));
+			     &(pcix_cmd));
 
 	/*  Setting Maximum outstanding splits based on system type. */
-	sp->pcix_cmd &= 0xFF8F;
+	pcix_cmd &= 0xFF8F;
+	pcix_cmd |= XENA_MAX_OUTSTANDING_SPLITS(0x1);	/* 2 splits. */
+	pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
+			      pcix_cmd);
+	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
+			     &(pcix_cmd));
 
-	sp->pcix_cmd |= XENA_MAX_OUTSTANDING_SPLITS(0x1);	/* 2 splits. */
-	pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			      sp->pcix_cmd);
-	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			     &(sp->pcix_cmd));
 	/* Forcibly disabling relaxed ordering capability of the card. */
-	sp->pcix_cmd &= 0xfffd;
+	pcix_cmd &= 0xfffd;
 	pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			      sp->pcix_cmd);
+			      pcix_cmd);
 	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			     &(sp->pcix_cmd));
+			     &(pcix_cmd));
 }
 
 MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>");
 MODULE_LICENSE("GPL");
 module_param(tx_fifo_num, int, 0);
-module_param_array(tx_fifo_len, int, NULL, 0);
 module_param(rx_ring_num, int, 0);
-module_param_array(rx_ring_sz, int, NULL, 0);
+module_param_array(tx_fifo_len, uint, NULL, 0);
+module_param_array(rx_ring_sz, uint, NULL, 0);
 module_param(Stats_refresh_time, int, 0);
+module_param_array(rts_frm_len, uint, NULL, 0);
 module_param(rmac_pause_time, int, 0);
 module_param(mc_pause_threshold_q0q3, int, 0);
 module_param(mc_pause_threshold_q4q7, int, 0);
@@ -4553,15 +4409,16 @@
 #ifndef CONFIG_S2IO_NAPI
 module_param(indicate_max_pkts, int, 0);
 #endif
+
 /**
- *  s2io_init_nic - Initialization of the adapter . 
+ *  s2io_init_nic - Initialization of the adapter .
  *  @pdev : structure containing the PCI related information of the device.
  *  @pre: List of PCI devices supported by the driver listed in s2io_tbl.
  *  Description:
  *  The function initializes an adapter identified by the pci_dec structure.
- *  All OS related initialization including memory and device structure and 
- *  initlaization of the device private variable is done. Also the swapper 
- *  control register is initialized to enable read and write into the I/O 
+ *  All OS related initialization including memory and device structure and
+ *  initlaization of the device private variable is done. Also the swapper
+ *  control register is initialized to enable read and write into the I/O
  *  registers of the device.
  *  Return value:
  *  returns 0 on success and negative on failure.
@@ -4572,7 +4429,6 @@
 {
 	nic_t *sp;
 	struct net_device *dev;
-	char *dev_name = "S2IO 10GE NIC";
 	int i, j, ret;
 	int dma_flag = FALSE;
 	u32 mac_up, mac_down;
@@ -4582,9 +4438,9 @@
 	mac_info_t *mac_control;
 	struct config_param *config;
 
-
-	DBG_PRINT(ERR_DBG, "Loading S2IO driver with %s\n",
-		s2io_driver_version);
+#ifdef CONFIG_S2IO_NAPI
+	DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n");
+#endif
 
 	if ((ret = pci_enable_device(pdev))) {
 		DBG_PRINT(ERR_DBG,
@@ -4595,7 +4451,6 @@
 	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
 		DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
 		dma_flag = TRUE;
-
 		if (pci_set_consistent_dma_mask
 		    (pdev, DMA_64BIT_MASK)) {
 			DBG_PRINT(ERR_DBG,
@@ -4635,21 +4490,17 @@
 	memset(sp, 0, sizeof(nic_t));
 	sp->dev = dev;
 	sp->pdev = pdev;
-	sp->vendor_id = pdev->vendor;
-	sp->device_id = pdev->device;
 	sp->high_dma_flag = dma_flag;
-	sp->irq = pdev->irq;
 	sp->device_enabled_once = FALSE;
-	strcpy(sp->name, dev_name);
 
 	/* Initialize some PCI/PCI-X fields of the NIC. */
 	s2io_init_pci(sp);
 
-	/* 
+	/*
 	 * Setting the device configuration parameters.
-	 * Most of these parameters can be specified by the user during 
-	 * module insertion as they are module loadable parameters. If 
-	 * these parameters are not not specified during load time, they 
+	 * Most of these parameters can be specified by the user during
+	 * module insertion as they are module loadable parameters. If
+	 * these parameters are not not specified during load time, they
 	 * are initialized with default values.
 	 */
 	mac_control = &sp->mac_control;
@@ -4663,6 +4514,10 @@
 		config->tx_cfg[i].fifo_priority = i;
 	}
 
+	/* mapping the QoS priority to the configured fifos */
+	for (i = 0; i < MAX_TX_FIFOS; i++)
+		config->fifo_mapping[i] = fifo_map[config->tx_fifo_num][i];
+
 	config->tx_intr_type = TXD_INT_TYPE_UTILZ;
 	for (i = 0; i < config->tx_fifo_num; i++) {
 		config->tx_cfg[i].f_no_snoop =
@@ -4743,13 +4598,14 @@
 	dev->do_ioctl = &s2io_ioctl;
 	dev->change_mtu = &s2io_change_mtu;
 	SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+
 	/*
 	 * will use eth_mac_addr() for  dev->set_mac_address
 	 * mac address will be set every time dev->open() is called
 	 */
-#ifdef CONFIG_S2IO_NAPI
+#if defined(CONFIG_S2IO_NAPI)
 	dev->poll = s2io_poll;
-	dev->weight = 90;
+	dev->weight = 32;
 #endif
 
 	dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
@@ -4776,22 +4632,14 @@
 		goto set_swap_failed;
 	}
 
-	/* Fix for all "FFs" MAC address problems observed on Alpha platforms */
+	/*
+	 * Fix for all "FFs" MAC address problems observed on
+	 * Alpha platforms
+	 */
 	fix_mac_address(sp);
 	s2io_reset(sp);
 
 	/*
-	 * Setting swapper control on the NIC, so the MAC address can be read.
-	 */
-	if (s2io_set_swapper(sp)) {
-		DBG_PRINT(ERR_DBG,
-			  "%s: S2IO: swapper settings are wrong\n",
-			  dev->name);
-		ret = -EAGAIN;
-		goto set_swap_failed;
-	}
-
-	/*  
 	 * MAC address initialization.
 	 * For now only one mac address will be read and used.
 	 */
@@ -4828,23 +4676,22 @@
 	memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
 
 	/*
-	 * Initialize the tasklet status and link state flags 
+	 * Initialize the tasklet status and link state flags
 	 * and the card statte parameter
 	 */
 	atomic_set(&(sp->card_state), 0);
 	sp->tasklet_status = 0;
 	sp->link_state = 0;
 
-
 	/* Initialize spinlocks */
 	spin_lock_init(&sp->tx_lock);
 #ifndef CONFIG_S2IO_NAPI
 	spin_lock_init(&sp->put_lock);
 #endif
 
-	/* 
-	 * SXE-002: Configure link and activity LED to init state 
-	 * on driver load. 
+	/*
+	 * SXE-002: Configure link and activity LED to init state
+	 * on driver load.
 	 */
 	subid = sp->pdev->subsystem_device;
 	if ((subid & 0xFF) >= 0x07) {
@@ -4864,9 +4711,9 @@
 		goto register_failed;
 	}
 
-	/* 
-	 * Make Link state as off at this point, when the Link change 
-	 * interrupt comes the state will be automatically changed to 
+	/*
+	 * Make Link state as off at this point, when the Link change
+	 * interrupt comes the state will be automatically changed to
 	 * the right state.
 	 */
 	netif_carrier_off(dev);
@@ -4891,11 +4738,11 @@
 }
 
 /**
- * s2io_rem_nic - Free the PCI device 
+ * s2io_rem_nic - Free the PCI device
  * @pdev: structure containing the PCI related information of the device.
- * Description: This function is called by the Pci subsystem to release a 
+ * Description: This function is called by the Pci subsystem to release a
  * PCI device and free up all resource held up by the device. This could
- * be in response to a Hot plug event or when the driver is to be removed 
+ * be in response to a Hot plug event or when the driver is to be removed
  * from memory.
  */
 
@@ -4919,7 +4766,6 @@
 	pci_disable_device(pdev);
 	pci_release_regions(pdev);
 	pci_set_drvdata(pdev, NULL);
-
 	free_netdev(dev);
 }
 
@@ -4935,11 +4781,11 @@
 }
 
 /**
- * s2io_closer - Cleanup routine for the driver 
+ * s2io_closer - Cleanup routine for the driver
  * Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
  */
 
-static void s2io_closer(void)
+void s2io_closer(void)
 {
 	pci_unregister_driver(&s2io_driver);
 	DBG_PRINT(INIT_DBG, "cleanup done\n");