ahci: implement SCR_NOTIFICATION r/w
Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller
supports it. Also, print "sntf" in the cap line if supported.
While at it, convert eight space into a tab in ahci_print_info().
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 9475e56..de8bffb 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -99,6 +99,7 @@
HOST_CAP_SSC = (1 << 14), /* Slumber capable */
HOST_CAP_CLO = (1 << 24), /* Command List Override support */
HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+ HOST_CAP_SNTF = (1 << 29), /* SNotification register */
HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
@@ -113,11 +114,11 @@
PORT_TFDATA = 0x20, /* taskfile data */
PORT_SIG = 0x24, /* device TF signature */
PORT_CMD_ISSUE = 0x38, /* command issue */
- PORT_SCR = 0x28, /* SATA phy register block */
PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
+ PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
/* PORT_IRQ_{STAT,MASK} bits */
PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
@@ -631,39 +632,45 @@
(void) readl(mmio + HOST_PORTS_IMPL); /* flush */
}
-static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val)
+static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
{
- unsigned int sc_reg;
+ static const int offset[] = {
+ [SCR_STATUS] = PORT_SCR_STAT,
+ [SCR_CONTROL] = PORT_SCR_CTL,
+ [SCR_ERROR] = PORT_SCR_ERR,
+ [SCR_ACTIVE] = PORT_SCR_ACT,
+ [SCR_NOTIFICATION] = PORT_SCR_NTF,
+ };
+ struct ahci_host_priv *hpriv = ap->host->private_data;
- switch (sc_reg_in) {
- case SCR_STATUS: sc_reg = 0; break;
- case SCR_CONTROL: sc_reg = 1; break;
- case SCR_ERROR: sc_reg = 2; break;
- case SCR_ACTIVE: sc_reg = 3; break;
- default:
- return -EINVAL;
- }
-
- *val = readl(ap->ioaddr.scr_addr + (sc_reg * 4));
+ if (sc_reg < ARRAY_SIZE(offset) &&
+ (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
+ return offset[sc_reg];
return 0;
}
-
-static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
+static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
{
- unsigned int sc_reg;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ int offset = ahci_scr_offset(ap, sc_reg);
- switch (sc_reg_in) {
- case SCR_STATUS: sc_reg = 0; break;
- case SCR_CONTROL: sc_reg = 1; break;
- case SCR_ERROR: sc_reg = 2; break;
- case SCR_ACTIVE: sc_reg = 3; break;
- default:
- return -EINVAL;
+ if (offset) {
+ *val = readl(port_mmio + offset);
+ return 0;
}
+ return -EINVAL;
+}
- writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
- return 0;
+static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ int offset = ahci_scr_offset(ap, sc_reg);
+
+ if (offset) {
+ writel(val, port_mmio + offset);
+ return 0;
+ }
+ return -EINVAL;
}
static void ahci_start_engine(struct ata_port *ap)
@@ -1768,12 +1775,13 @@
dev_printk(KERN_INFO, &pdev->dev,
"flags: "
- "%s%s%s%s%s%s"
- "%s%s%s%s%s%s%s\n"
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s%s\n"
,
cap & (1 << 31) ? "64bit " : "",
cap & (1 << 30) ? "ncq " : "",
+ cap & (1 << 29) ? "sntf " : "",
cap & (1 << 28) ? "ilck " : "",
cap & (1 << 27) ? "stag " : "",
cap & (1 << 26) ? "pm " : "",
@@ -1842,10 +1850,8 @@
void __iomem *port_mmio = ahci_port_base(ap);
/* standard SATA port setup */
- if (hpriv->port_map & (1 << i)) {
+ if (hpriv->port_map & (1 << i))
ap->ioaddr.cmd_addr = port_mmio;
- ap->ioaddr.scr_addr = port_mmio + PORT_SCR;
- }
/* disabled/not-implemented port */
else