| /* |
| * linux/fs/9p/error.h |
| * |
| * Huge Nasty Error Table |
| * |
| * Plan 9 uses error strings, Unix uses error numbers. This table tries to |
| * match UNIX strings and Plan 9 strings to unix error numbers. It is used |
| * to preload the dynamic error table which can also track user-specific error |
| * strings. |
| * |
| * Copyright (C) 2004 by Eric Van Hensbergen <ericvh@gmail.com> |
| * Copyright (C) 2002 by Ron Minnich <rminnich@lanl.gov> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to: |
| * Free Software Foundation |
| * 51 Franklin Street, Fifth Floor |
| * Boston, MA 02111-1301 USA |
| * |
| */ |
| |
| #include <linux/errno.h> |
| #include <asm/errno.h> |
| |
| struct errormap { |
| char *name; |
| int val; |
| |
| int namelen; |
| struct hlist_node list; |
| }; |
| |
| #define ERRHASHSZ 32 |
| static struct hlist_head hash_errmap[ERRHASHSZ]; |
| |
| /* FixMe - reduce to a reasonable size */ |
| static struct errormap errmap[] = { |
| {"Operation not permitted", EPERM}, |
| {"wstat prohibited", EPERM}, |
| {"No such file or directory", ENOENT}, |
| {"directory entry not found", ENOENT}, |
| {"file not found", ENOENT}, |
| {"Interrupted system call", EINTR}, |
| {"Input/output error", EIO}, |
| {"No such device or address", ENXIO}, |
| {"Argument list too long", E2BIG}, |
| {"Bad file descriptor", EBADF}, |
| {"Resource temporarily unavailable", EAGAIN}, |
| {"Cannot allocate memory", ENOMEM}, |
| {"Permission denied", EACCES}, |
| {"Bad address", EFAULT}, |
| {"Block device required", ENOTBLK}, |
| {"Device or resource busy", EBUSY}, |
| {"File exists", EEXIST}, |
| {"Invalid cross-device link", EXDEV}, |
| {"No such device", ENODEV}, |
| {"Not a directory", ENOTDIR}, |
| {"Is a directory", EISDIR}, |
| {"Invalid argument", EINVAL}, |
| {"Too many open files in system", ENFILE}, |
| {"Too many open files", EMFILE}, |
| {"Text file busy", ETXTBSY}, |
| {"File too large", EFBIG}, |
| {"No space left on device", ENOSPC}, |
| {"Illegal seek", ESPIPE}, |
| {"Read-only file system", EROFS}, |
| {"Too many links", EMLINK}, |
| {"Broken pipe", EPIPE}, |
| {"Numerical argument out of domain", EDOM}, |
| {"Numerical result out of range", ERANGE}, |
| {"Resource deadlock avoided", EDEADLK}, |
| {"File name too long", ENAMETOOLONG}, |
| {"No locks available", ENOLCK}, |
| {"Function not implemented", ENOSYS}, |
| {"Directory not empty", ENOTEMPTY}, |
| {"Too many levels of symbolic links", ELOOP}, |
| {"No message of desired type", ENOMSG}, |
| {"Identifier removed", EIDRM}, |
| {"No data available", ENODATA}, |
| {"Machine is not on the network", ENONET}, |
| {"Package not installed", ENOPKG}, |
| {"Object is remote", EREMOTE}, |
| {"Link has been severed", ENOLINK}, |
| {"Communication error on send", ECOMM}, |
| {"Protocol error", EPROTO}, |
| {"Bad message", EBADMSG}, |
| {"File descriptor in bad state", EBADFD}, |
| {"Streams pipe error", ESTRPIPE}, |
| {"Too many users", EUSERS}, |
| {"Socket operation on non-socket", ENOTSOCK}, |
| {"Message too long", EMSGSIZE}, |
| {"Protocol not available", ENOPROTOOPT}, |
| {"Protocol not supported", EPROTONOSUPPORT}, |
| {"Socket type not supported", ESOCKTNOSUPPORT}, |
| {"Operation not supported", EOPNOTSUPP}, |
| {"Protocol family not supported", EPFNOSUPPORT}, |
| {"Network is down", ENETDOWN}, |
| {"Network is unreachable", ENETUNREACH}, |
| {"Network dropped connection on reset", ENETRESET}, |
| {"Software caused connection abort", ECONNABORTED}, |
| {"Connection reset by peer", ECONNRESET}, |
| {"No buffer space available", ENOBUFS}, |
| {"Transport endpoint is already connected", EISCONN}, |
| {"Transport endpoint is not connected", ENOTCONN}, |
| {"Cannot send after transport endpoint shutdown", ESHUTDOWN}, |
| {"Connection timed out", ETIMEDOUT}, |
| {"Connection refused", ECONNREFUSED}, |
| {"Host is down", EHOSTDOWN}, |
| {"No route to host", EHOSTUNREACH}, |
| {"Operation already in progress", EALREADY}, |
| {"Operation now in progress", EINPROGRESS}, |
| {"Is a named type file", EISNAM}, |
| {"Remote I/O error", EREMOTEIO}, |
| {"Disk quota exceeded", EDQUOT}, |
| /* errors from fossil, vacfs, and u9fs */ |
| {"fid unknown or out of range", EBADF}, |
| {"permission denied", EACCES}, |
| {"file does not exist", ENOENT}, |
| {"authentication failed", ECONNREFUSED}, |
| {"bad offset in directory read", ESPIPE}, |
| {"bad use of fid", EBADF}, |
| {"wstat can't convert between files and directories", EPERM}, |
| {"directory is not empty", ENOTEMPTY}, |
| {"file exists", EEXIST}, |
| {"file already exists", EEXIST}, |
| {"file or directory already exists", EEXIST}, |
| {"fid already in use", EBADF}, |
| {"file in use", ETXTBSY}, |
| {"i/o error", EIO}, |
| {"file already open for I/O", ETXTBSY}, |
| {"illegal mode", EINVAL}, |
| {"illegal name", ENAMETOOLONG}, |
| {"not a directory", ENOTDIR}, |
| {"not a member of proposed group", EPERM}, |
| {"not owner", EACCES}, |
| {"only owner can change group in wstat", EACCES}, |
| {"read only file system", EROFS}, |
| {"no access to special file", EPERM}, |
| {"i/o count too large", EIO}, |
| {"unknown group", EINVAL}, |
| {"unknown user", EINVAL}, |
| {"bogus wstat buffer", EPROTO}, |
| {"exclusive use file already open", EAGAIN}, |
| {"corrupted directory entry", EIO}, |
| {"corrupted file entry", EIO}, |
| {"corrupted block label", EIO}, |
| {"corrupted meta data", EIO}, |
| {"illegal offset", EINVAL}, |
| {"illegal path element", ENOENT}, |
| {"root of file system is corrupted", EIO}, |
| {"corrupted super block", EIO}, |
| {"protocol botch", EPROTO}, |
| {"file system is full", ENOSPC}, |
| {"file is in use", EAGAIN}, |
| {"directory entry is not allocated", ENOENT}, |
| {"file is read only", EROFS}, |
| {"file has been removed", EIDRM}, |
| {"only support truncation to zero length", EPERM}, |
| {"cannot remove root", EPERM}, |
| {"file too big", EFBIG}, |
| {"venti i/o error", EIO}, |
| /* these are not errors */ |
| {"u9fs rhostsauth: no authentication required", 0}, |
| {"u9fs authnone: no authentication required", 0}, |
| {NULL, -1} |
| }; |
| |
| extern int v9fs_error_init(void); |