Merge branch 'davinci-next' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into devel-stable
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop
index 1d77539..41ff8ae 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -47,6 +47,20 @@
KernelVersion: 2.6.20
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
- Control the bluetooth device. 1 means on, 0 means off.
+ Control the wlan device. 1 means on, 0 means off.
This may control the led, the device or both.
Users: Lapsus
+
+What: /sys/devices/platform/asus_laptop/wimax
+Date: October 2010
+KernelVersion: 2.6.37
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Control the wimax device. 1 means on, 0 means off.
+
+What: /sys/devices/platform/asus_laptop/wwan
+Date: October 2010
+KernelVersion: 2.6.37
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Control the wwan (3G) device. 1 means on, 0 means off.
diff --git a/Documentation/ABI/testing/sysfs-platform-eeepc-wmi b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi
new file mode 100644
index 0000000..e4b5fef
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi
@@ -0,0 +1,10 @@
+What: /sys/devices/platform/eeepc-wmi/cpufv
+Date: Oct 2010
+KernelVersion: 2.6.37
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Change CPU clock configuration (write-only).
+ There are three available clock configuration:
+ * 0 -> Super Performance Mode
+ * 1 -> High Performance Mode
+ * 2 -> Power Saving Mode
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index a91f308..b6426f1 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -173,12 +173,13 @@
sector_t (*bmap)(struct address_space *, sector_t);
int (*invalidatepage) (struct page *, unsigned long);
int (*releasepage) (struct page *, int);
+ void (*freepage)(struct page *);
int (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
int (*launder_page) (struct page *);
locking rules:
- All except set_page_dirty may block
+ All except set_page_dirty and freepage may block
BKL PageLocked(page) i_mutex
writepage: no yes, unlocks (see below)
@@ -193,6 +194,7 @@
bmap: no
invalidatepage: no yes
releasepage: no yes
+freepage: no yes
direct_IO: no
launder_page: no yes
@@ -288,6 +290,9 @@
indicate that the buffers are (or may be) freeable. If ->releasepage is zero,
the kernel assumes that the fs has no private interest in the buffers.
+ ->freepage() is called when the kernel is done dropping the page
+from the page cache.
+
->launder_page() may be called prior to releasing a page if
it is still found to be dirty. It returns zero if the page was successfully
cleaned, or an error value if not. Note that in order to prevent the page
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 55c28b7..20899e0 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -534,6 +534,7 @@
sector_t (*bmap)(struct address_space *, sector_t);
int (*invalidatepage) (struct page *, unsigned long);
int (*releasepage) (struct page *, int);
+ void (*freepage)(struct page *);
ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
struct page* (*get_xip_page)(struct address_space *, sector_t,
@@ -678,6 +679,12 @@
need to ensure this. Possibly it can clear the PageUptodate
bit if it cannot free private data yet.
+ freepage: freepage is called once the page is no longer visible in
+ the page cache in order to allow the cleanup of any private
+ data. Since it may be called by the memory reclaimer, it
+ should not assume that the original address_space mapping still
+ exists, and it should not block.
+
direct_IO: called by the generic read/write routines to perform
direct_IO - that is IO requests which bypass the page cache
and transfer data directly between the storage and the
diff --git a/MAINTAINERS b/MAINTAINERS
index 1a1c27b..6a58887 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -559,14 +559,14 @@
S: Maintained
ARM/BCMRING ARM ARCHITECTURE
-M: Leo Chen <leochen@broadcom.com>
+M: Jiandong Zheng <jdzheng@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-bcmring
ARM/BCMRING MTD NAND DRIVER
-M: Leo Chen <leochen@broadcom.com>
+M: Jiandong Zheng <jdzheng@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
L: linux-mtd@lists.infradead.org
S: Maintained
@@ -815,7 +815,7 @@
F: drivers/mmc/host/msm_sdcc.h
F: drivers/serial/msm_serial.h
F: drivers/serial/msm_serial.c
-T: git git://codeaurora.org/quic/kernel/dwalker/linux-msm.git
+T: git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
S: Maintained
ARM/TOSA MACHINE SUPPORT
@@ -5932,7 +5932,6 @@
TULIP NETWORK DRIVERS
M: Grant Grundler <grundler@parisc-linux.org>
-M: Kyle McMartin <kyle@mcmartin.ca>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/tulip/
@@ -6584,6 +6583,15 @@
F: include/sound/wm????.h
F: sound/soc/codecs/wm*
+WORKQUEUE
+M: Tejun Heo <tj@kernel.org>
+L: linux-kernel@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git
+S: Maintained
+F: include/linux/workqueue.h
+F: kernel/workqueue.c
+F: Documentation/workqueue.txt
+
X.25 NETWORK LAYER
M: Andrew Hendry <andrew.hendry@gmail.com>
L: linux-x25@vger.kernel.org
diff --git a/Makefile b/Makefile
index 3d94974..5aa4427 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 37
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f1d9297..d571cdb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -14,6 +14,7 @@
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+ select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
@@ -999,8 +1000,8 @@
config IWMMXT
bool "Enable iWMMXt support"
- depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
- default y if PXA27x || PXA3xx || ARCH_MMP
+ depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
+ default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
@@ -1205,10 +1206,11 @@
depends on EXPERIMENTAL
depends on GENERIC_CLOCKEVENTS
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
- MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
- ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
+ ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
+ ARCH_MSM_SCORPIONMP
select USE_GENERIC_SMP_HELPERS
- select HAVE_ARM_SCU
+ select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -1283,6 +1285,7 @@
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && HOTPLUG && EXPERIMENTAL
+ depends on !ARCH_MSM
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
@@ -1291,7 +1294,7 @@
bool "Use local timer interrupts"
depends on SMP
default y
- select HAVE_ARM_TWD
+ select HAVE_ARM_TWD if !ARCH_MSM_SCORPIONMP
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
@@ -1311,7 +1314,7 @@
config THUMB2_KERNEL
bool "Compile the kernel in Thumb-2 mode"
- depends on CPU_V7 && EXPERIMENTAL
+ depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
select AEABI
select ARM_ASM_UNIFIED
help
@@ -1759,7 +1762,7 @@
config FPE_NWFPE
bool "NWFPE math emulation"
- depends on !AEABI || OABI_COMPAT
+ depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
---help---
Say Y to include the NWFPE floating point emulator in the kernel.
This is necessary to run most binaries. Linux does not currently
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 2fd0b99..eac6208 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -23,7 +23,7 @@
config FRAME_POINTER
bool
depends on !THUMB2_KERNEL
- default y if !ARM_UNWIND
+ default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
help
If you say N here, the resulting kernel will be slightly smaller and
faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index 4d8ae9d..f389b27 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -20,8 +20,8 @@
struct arch_hw_breakpoint {
u32 address;
u32 trigger;
- struct perf_event *suspended_wp;
- struct arch_hw_breakpoint_ctrl ctrl;
+ struct arch_hw_breakpoint_ctrl step_ctrl;
+ struct arch_hw_breakpoint_ctrl ctrl;
};
static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl)
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 1120f18..ec4327a 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -63,6 +63,11 @@
#include <asm/outercache.h>
#define __exception __attribute__((section(".exception.text")))
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#define __exception_irq_entry __irq_entry
+#else
+#define __exception_irq_entry __exception
+#endif
struct thread_info;
struct task_struct;
diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
index 491960b..124475a 100644
--- a/arch/arm/include/asm/traps.h
+++ b/arch/arm/include/asm/traps.h
@@ -15,13 +15,32 @@
void register_undef_hook(struct undef_hook *hook);
void unregister_undef_hook(struct undef_hook *hook);
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static inline int __in_irqentry_text(unsigned long ptr)
+{
+ extern char __irqentry_text_start[];
+ extern char __irqentry_text_end[];
+
+ return ptr >= (unsigned long)&__irqentry_text_start &&
+ ptr < (unsigned long)&__irqentry_text_end;
+}
+#else
+static inline int __in_irqentry_text(unsigned long ptr)
+{
+ return 0;
+}
+#endif
+
static inline int in_exception_text(unsigned long ptr)
{
extern char __exception_text_start[];
extern char __exception_text_end[];
+ int in;
- return ptr >= (unsigned long)&__exception_text_start &&
- ptr < (unsigned long)&__exception_text_end;
+ in = ptr >= (unsigned long)&__exception_text_start &&
+ ptr < (unsigned long)&__exception_text_end;
+
+ return in ? : __in_irqentry_text(ptr);
}
extern void __init early_trap_init(void);
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 5b9b268..c73abe4 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -5,7 +5,7 @@
CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
-ifdef CONFIG_DYNAMIC_FTRACE
+ifdef CONFIG_FUNCTION_TRACER
CFLAGS_REMOVE_ftrace.o = -pg
endif
@@ -33,6 +33,7 @@
obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o
obj-$(CONFIG_ATAGS_PROC) += atags.o
@@ -50,6 +51,7 @@
obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o
obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o
obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o
+obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o
obj-$(CONFIG_IWMMXT) += iwmmxt.o
obj-$(CONFIG_CPU_HAS_PMU) += pmu.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index bb96a7d..36199ff 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -198,6 +198,7 @@
@
@ set desired IRQ state, then call main handler
@
+ debug_entry r1
msr cpsr_c, r9
mov r2, sp
bl do_DataAbort
@@ -324,6 +325,7 @@
#else
bl CPU_PABORT_HANDLER
#endif
+ debug_entry r1
msr cpsr_c, r9 @ Maybe enable interrupts
mov r2, sp @ regs
bl do_PrefetchAbort @ call abort handler
@@ -439,6 +441,7 @@
@
@ IRQs on, then call the main handler
@
+ debug_entry r1
enable_irq
mov r2, sp
adr lr, BSYM(ret_from_exception)
@@ -703,6 +706,7 @@
#else
bl CPU_PABORT_HANDLER
#endif
+ debug_entry r1
enable_irq @ Enable interrupts
mov r2, sp @ regs
bl do_PrefetchAbort @ call abort handler
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 8bfa987..aae802e 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -141,98 +141,170 @@
#endif
#endif
-#ifdef CONFIG_DYNAMIC_FTRACE
-ENTRY(__gnu_mcount_nc)
- mov ip, lr
- ldmia sp!, {lr}
- mov pc, ip
-ENDPROC(__gnu_mcount_nc)
-
-ENTRY(ftrace_caller)
- stmdb sp!, {r0-r3, lr}
- mov r0, lr
- sub r0, r0, #MCOUNT_INSN_SIZE
- ldr r1, [sp, #20]
-
- .global ftrace_call
-ftrace_call:
- bl ftrace_stub
- ldmia sp!, {r0-r3, ip, lr}
- mov pc, ip
-ENDPROC(ftrace_caller)
-
-#ifdef CONFIG_OLD_MCOUNT
-ENTRY(mcount)
- stmdb sp!, {lr}
- ldr lr, [fp, #-4]
- ldmia sp!, {pc}
-ENDPROC(mcount)
-
-ENTRY(ftrace_caller_old)
- stmdb sp!, {r0-r3, lr}
- ldr r1, [fp, #-4]
- mov r0, lr
- sub r0, r0, #MCOUNT_INSN_SIZE
-
- .globl ftrace_call_old
-ftrace_call_old:
- bl ftrace_stub
- ldr lr, [fp, #-4] @ restore lr
- ldmia sp!, {r0-r3, pc}
-ENDPROC(ftrace_caller_old)
-#endif
-
-#else
-
-ENTRY(__gnu_mcount_nc)
- stmdb sp!, {r0-r3, lr}
+.macro __mcount suffix
+ mcount_enter
ldr r0, =ftrace_trace_function
ldr r2, [r0]
adr r0, .Lftrace_stub
cmp r0, r2
- bne gnu_trace
- ldmia sp!, {r0-r3, ip, lr}
- mov pc, ip
+ bne 1f
-gnu_trace:
- ldr r1, [sp, #20] @ lr of instrumented routine
- mov r0, lr
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ ldr r1, =ftrace_graph_return
+ ldr r2, [r1]
+ cmp r0, r2
+ bne ftrace_graph_caller\suffix
+
+ ldr r1, =ftrace_graph_entry
+ ldr r2, [r1]
+ ldr r0, =ftrace_graph_entry_stub
+ cmp r0, r2
+ bne ftrace_graph_caller\suffix
+#endif
+
+ mcount_exit
+
+1: mcount_get_lr r1 @ lr of instrumented func
+ mov r0, lr @ instrumented function
sub r0, r0, #MCOUNT_INSN_SIZE
- adr lr, BSYM(1f)
+ adr lr, BSYM(2f)
mov pc, r2
-1:
- ldmia sp!, {r0-r3, ip, lr}
- mov pc, ip
-ENDPROC(__gnu_mcount_nc)
+2: mcount_exit
+.endm
+
+.macro __ftrace_caller suffix
+ mcount_enter
+
+ mcount_get_lr r1 @ lr of instrumented func
+ mov r0, lr @ instrumented function
+ sub r0, r0, #MCOUNT_INSN_SIZE
+
+ .globl ftrace_call\suffix
+ftrace_call\suffix:
+ bl ftrace_stub
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ .globl ftrace_graph_call\suffix
+ftrace_graph_call\suffix:
+ mov r0, r0
+#endif
+
+ mcount_exit
+.endm
+
+.macro __ftrace_graph_caller
+ sub r0, fp, #4 @ &lr of instrumented routine (&parent)
+#ifdef CONFIG_DYNAMIC_FTRACE
+ @ called from __ftrace_caller, saved in mcount_enter
+ ldr r1, [sp, #16] @ instrumented routine (func)
+#else
+ @ called from __mcount, untouched in lr
+ mov r1, lr @ instrumented routine (func)
+#endif
+ sub r1, r1, #MCOUNT_INSN_SIZE
+ mov r2, fp @ frame pointer
+ bl prepare_ftrace_return
+ mcount_exit
+.endm
#ifdef CONFIG_OLD_MCOUNT
/*
- * This is under an ifdef in order to force link-time errors for people trying
- * to build with !FRAME_POINTER with a GCC which doesn't use the new-style
- * mcount.
+ * mcount
*/
-ENTRY(mcount)
- stmdb sp!, {r0-r3, lr}
- ldr r0, =ftrace_trace_function
- ldr r2, [r0]
- adr r0, ftrace_stub
- cmp r0, r2
- bne trace
- ldr lr, [fp, #-4] @ restore lr
- ldmia sp!, {r0-r3, pc}
-trace:
- ldr r1, [fp, #-4] @ lr of instrumented routine
- mov r0, lr
- sub r0, r0, #MCOUNT_INSN_SIZE
- mov lr, pc
- mov pc, r2
- ldr lr, [fp, #-4] @ restore lr
+.macro mcount_enter
+ stmdb sp!, {r0-r3, lr}
+.endm
+
+.macro mcount_get_lr reg
+ ldr \reg, [fp, #-4]
+.endm
+
+.macro mcount_exit
+ ldr lr, [fp, #-4]
ldmia sp!, {r0-r3, pc}
+.endm
+
+ENTRY(mcount)
+#ifdef CONFIG_DYNAMIC_FTRACE
+ stmdb sp!, {lr}
+ ldr lr, [fp, #-4]
+ ldmia sp!, {pc}
+#else
+ __mcount _old
+#endif
ENDPROC(mcount)
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+ENTRY(ftrace_caller_old)
+ __ftrace_caller _old
+ENDPROC(ftrace_caller_old)
#endif
-#endif /* CONFIG_DYNAMIC_FTRACE */
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(ftrace_graph_caller_old)
+ __ftrace_graph_caller
+ENDPROC(ftrace_graph_caller_old)
+#endif
+
+.purgem mcount_enter
+.purgem mcount_get_lr
+.purgem mcount_exit
+#endif
+
+/*
+ * __gnu_mcount_nc
+ */
+
+.macro mcount_enter
+ stmdb sp!, {r0-r3, lr}
+.endm
+
+.macro mcount_get_lr reg
+ ldr \reg, [sp, #20]
+.endm
+
+.macro mcount_exit
+ ldmia sp!, {r0-r3, ip, lr}
+ mov pc, ip
+.endm
+
+ENTRY(__gnu_mcount_nc)
+#ifdef CONFIG_DYNAMIC_FTRACE
+ mov ip, lr
+ ldmia sp!, {lr}
+ mov pc, ip
+#else
+ __mcount
+#endif
+ENDPROC(__gnu_mcount_nc)
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+ENTRY(ftrace_caller)
+ __ftrace_caller
+ENDPROC(ftrace_caller)
+#endif
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(ftrace_graph_caller)
+ __ftrace_graph_caller
+ENDPROC(ftrace_graph_caller)
+#endif
+
+.purgem mcount_enter
+.purgem mcount_get_lr
+.purgem mcount_exit
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ .globl return_to_handler
+return_to_handler:
+ stmdb sp!, {r0-r3}
+ mov r0, fp @ frame pointer
+ bl ftrace_return_to_handler
+ mov lr, r0 @ r0 has real ret addr
+ ldmia sp!, {r0-r3}
+ mov pc, lr
+#endif
ENTRY(ftrace_stub)
.Lftrace_stub:
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index d93f976..ae94649 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -165,6 +165,25 @@
.endm
#endif /* !CONFIG_THUMB2_KERNEL */
+ @
+ @ Debug exceptions are taken as prefetch or data aborts.
+ @ We must disable preemption during the handler so that
+ @ we can access the debug registers safely.
+ @
+ .macro debug_entry, fsr
+#if defined(CONFIG_HAVE_HW_BREAKPOINT) && defined(CONFIG_PREEMPT)
+ ldr r4, =0x40f @ mask out fsr.fs
+ and r5, r4, \fsr
+ cmp r5, #2 @ debug exception
+ bne 1f
+ get_thread_info r10
+ ldr r6, [r10, #TI_PREEMPT] @ get preempt count
+ add r11, r6, #1 @ increment it
+ str r11, [r10, #TI_PREEMPT]
+1:
+#endif
+ .endm
+
/*
* These are the registers used in the syscall handler, and allow us to
* have in theory up to 7 arguments to a function - r0 to r6.
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 971ac8c..c0062ad 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -24,6 +24,7 @@
#define NOP 0xe8bd4000 /* pop {lr} */
#endif
+#ifdef CONFIG_DYNAMIC_FTRACE
#ifdef CONFIG_OLD_MCOUNT
#define OLD_MCOUNT_ADDR ((unsigned long) mcount)
#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
@@ -59,9 +60,9 @@
}
#endif
-/* construct a branch (BL) instruction to addr */
#ifdef CONFIG_THUMB2_KERNEL
-static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr,
+ bool link)
{
unsigned long s, j1, j2, i1, i2, imm10, imm11;
unsigned long first, second;
@@ -83,15 +84,22 @@
j2 = (!i2) ^ s;
first = 0xf000 | (s << 10) | imm10;
- second = 0xd000 | (j1 << 13) | (j2 << 11) | imm11;
+ second = 0x9000 | (j1 << 13) | (j2 << 11) | imm11;
+ if (link)
+ second |= 1 << 14;
return (second << 16) | first;
}
#else
-static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr,
+ bool link)
{
+ unsigned long opcode = 0xea000000;
long offset;
+ if (link)
+ opcode |= 1 << 24;
+
offset = (long)addr - (long)(pc + 8);
if (unlikely(offset < -33554432 || offset > 33554428)) {
/* Can't generate branches that far (from ARM ARM). Ftrace
@@ -103,10 +111,15 @@
offset = (offset >> 2) & 0x00ffffff;
- return 0xeb000000 | offset;
+ return opcode | offset;
}
#endif
+static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+{
+ return ftrace_gen_branch(pc, addr, true);
+}
+
static int ftrace_modify_code(unsigned long pc, unsigned long old,
unsigned long new)
{
@@ -193,3 +206,83 @@
return 0;
}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
+ unsigned long frame_pointer)
+{
+ unsigned long return_hooker = (unsigned long) &return_to_handler;
+ struct ftrace_graph_ent trace;
+ unsigned long old;
+ int err;
+
+ if (unlikely(atomic_read(¤t->tracing_graph_pause)))
+ return;
+
+ old = *parent;
+ *parent = return_hooker;
+
+ err = ftrace_push_return_trace(old, self_addr, &trace.depth,
+ frame_pointer);
+ if (err == -EBUSY) {
+ *parent = old;
+ return;
+ }
+
+ trace.func = self_addr;
+
+ /* Only trace if the calling function expects to */
+ if (!ftrace_graph_entry(&trace)) {
+ current->curr_ret_stack--;
+ *parent = old;
+ }
+}
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+extern unsigned long ftrace_graph_call;
+extern unsigned long ftrace_graph_call_old;
+extern void ftrace_graph_caller_old(void);
+
+static int __ftrace_modify_caller(unsigned long *callsite,
+ void (*func) (void), bool enable)
+{
+ unsigned long caller_fn = (unsigned long) func;
+ unsigned long pc = (unsigned long) callsite;
+ unsigned long branch = ftrace_gen_branch(pc, caller_fn, false);
+ unsigned long nop = 0xe1a00000; /* mov r0, r0 */
+ unsigned long old = enable ? nop : branch;
+ unsigned long new = enable ? branch : nop;
+
+ return ftrace_modify_code(pc, old, new);
+}
+
+static int ftrace_modify_graph_caller(bool enable)
+{
+ int ret;
+
+ ret = __ftrace_modify_caller(&ftrace_graph_call,
+ ftrace_graph_caller,
+ enable);
+
+#ifdef CONFIG_OLD_MCOUNT
+ if (!ret)
+ ret = __ftrace_modify_caller(&ftrace_graph_call_old,
+ ftrace_graph_caller_old,
+ enable);
+#endif
+
+ return ret;
+}
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+ return ftrace_modify_graph_caller(true);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+ return ftrace_modify_graph_caller(false);
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 21e3a4a..c9f3f04 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -24,6 +24,7 @@
#define pr_fmt(fmt) "hw-breakpoint: " fmt
#include <linux/errno.h>
+#include <linux/hardirq.h>
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <linux/smp.h>
@@ -44,6 +45,7 @@
/* Number of BRP/WRP registers on this CPU. */
static int core_num_brps;
+static int core_num_reserved_brps;
static int core_num_wrps;
/* Debug architecture version. */
@@ -52,87 +54,6 @@
/* Maximum supported watchpoint length. */
static u8 max_watchpoint_len;
-/* Determine number of BRP registers available. */
-static int get_num_brps(void)
-{
- u32 didr;
- ARM_DBG_READ(c0, 0, didr);
- return ((didr >> 24) & 0xf) + 1;
-}
-
-/* Determine number of WRP registers available. */
-static int get_num_wrps(void)
-{
- /*
- * FIXME: When a watchpoint fires, the only way to work out which
- * watchpoint it was is by disassembling the faulting instruction
- * and working out the address of the memory access.
- *
- * Furthermore, we can only do this if the watchpoint was precise
- * since imprecise watchpoints prevent us from calculating register
- * based addresses.
- *
- * For the time being, we only report 1 watchpoint register so we
- * always know which watchpoint fired. In the future we can either
- * add a disassembler and address generation emulator, or we can
- * insert a check to see if the DFAR is set on watchpoint exception
- * entry [the ARM ARM states that the DFAR is UNKNOWN, but
- * experience shows that it is set on some implementations].
- */
-
-#if 0
- u32 didr, wrps;
- ARM_DBG_READ(c0, 0, didr);
- return ((didr >> 28) & 0xf) + 1;
-#endif
-
- return 1;
-}
-
-int hw_breakpoint_slots(int type)
-{
- /*
- * We can be called early, so don't rely on
- * our static variables being initialised.
- */
- switch (type) {
- case TYPE_INST:
- return get_num_brps();
- case TYPE_DATA:
- return get_num_wrps();
- default:
- pr_warning("unknown slot type: %d\n", type);
- return 0;
- }
-}
-
-/* Determine debug architecture. */
-static u8 get_debug_arch(void)
-{
- u32 didr;
-
- /* Do we implement the extended CPUID interface? */
- if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
- pr_warning("CPUID feature registers not supported. "
- "Assuming v6 debug is present.\n");
- return ARM_DEBUG_ARCH_V6;
- }
-
- ARM_DBG_READ(c0, 0, didr);
- return (didr >> 16) & 0xf;
-}
-
-/* Does this core support mismatch breakpoints? */
-static int core_has_mismatch_bps(void)
-{
- return debug_arch >= ARM_DEBUG_ARCH_V7_ECP14 && core_num_brps > 1;
-}
-
-u8 arch_get_debug_arch(void)
-{
- return debug_arch;
-}
-
#define READ_WB_REG_CASE(OP2, M, VAL) \
case ((OP2 << 4) + M): \
ARM_DBG_READ(c ## M, OP2, VAL); \
@@ -210,6 +131,94 @@
isb();
}
+/* Determine debug architecture. */
+static u8 get_debug_arch(void)
+{
+ u32 didr;
+
+ /* Do we implement the extended CPUID interface? */
+ if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
+ pr_warning("CPUID feature registers not supported. "
+ "Assuming v6 debug is present.\n");
+ return ARM_DEBUG_ARCH_V6;
+ }
+
+ ARM_DBG_READ(c0, 0, didr);
+ return (didr >> 16) & 0xf;
+}
+
+u8 arch_get_debug_arch(void)
+{
+ return debug_arch;
+}
+
+/* Determine number of BRP register available. */
+static int get_num_brp_resources(void)
+{
+ u32 didr;
+ ARM_DBG_READ(c0, 0, didr);
+ return ((didr >> 24) & 0xf) + 1;
+}
+
+/* Does this core support mismatch breakpoints? */
+static int core_has_mismatch_brps(void)
+{
+ return (get_debug_arch() >= ARM_DEBUG_ARCH_V7_ECP14 &&
+ get_num_brp_resources() > 1);
+}
+
+/* Determine number of usable WRPs available. */
+static int get_num_wrps(void)
+{
+ /*
+ * FIXME: When a watchpoint fires, the only way to work out which
+ * watchpoint it was is by disassembling the faulting instruction
+ * and working out the address of the memory access.
+ *
+ * Furthermore, we can only do this if the watchpoint was precise
+ * since imprecise watchpoints prevent us from calculating register
+ * based addresses.
+ *
+ * Providing we have more than 1 breakpoint register, we only report
+ * a single watchpoint register for the time being. This way, we always
+ * know which watchpoint fired. In the future we can either add a
+ * disassembler and address generation emulator, or we can insert a
+ * check to see if the DFAR is set on watchpoint exception entry
+ * [the ARM ARM states that the DFAR is UNKNOWN, but experience shows
+ * that it is set on some implementations].
+ */
+
+#if 0
+ int wrps;
+ u32 didr;
+ ARM_DBG_READ(c0, 0, didr);
+ wrps = ((didr >> 28) & 0xf) + 1;
+#endif
+ int wrps = 1;
+
+ if (core_has_mismatch_brps() && wrps >= get_num_brp_resources())
+ wrps = get_num_brp_resources() - 1;
+
+ return wrps;
+}
+
+/* We reserve one breakpoint for each watchpoint. */
+static int get_num_reserved_brps(void)
+{
+ if (core_has_mismatch_brps())
+ return get_num_wrps();
+ return 0;
+}
+
+/* Determine number of usable BRPs available. */
+static int get_num_brps(void)
+{
+ int brps = get_num_brp_resources();
+ if (core_has_mismatch_brps())
+ brps -= get_num_reserved_brps();
+ return brps;
+}
+
/*
* In order to access the breakpoint/watchpoint control registers,
* we must be running in debug monitor mode. Unfortunately, we can
@@ -230,8 +239,12 @@
goto out;
}
+ /* If monitor mode is already enabled, just return. */
+ if (dscr & ARM_DSCR_MDBGEN)
+ goto out;
+
/* Write to the corresponding DSCR. */
- switch (debug_arch) {
+ switch (get_debug_arch()) {
case ARM_DEBUG_ARCH_V6:
case ARM_DEBUG_ARCH_V6_1:
ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN));
@@ -246,15 +259,30 @@
/* Check that the write made it through. */
ARM_DBG_READ(c1, 0, dscr);
- if (WARN_ONCE(!(dscr & ARM_DSCR_MDBGEN),
- "failed to enable monitor mode.")) {
+ if (!(dscr & ARM_DSCR_MDBGEN))
ret = -EPERM;
- }
out:
return ret;
}
+int hw_breakpoint_slots(int type)
+{
+ /*
+ * We can be called early, so don't rely on
+ * our static variables being initialised.
+ */
+ switch (type) {
+ case TYPE_INST:
+ return get_num_brps();
+ case TYPE_DATA:
+ return get_num_wrps();
+ default:
+ pr_warning("unknown slot type: %d\n", type);
+ return 0;
+ }
+}
+
/*
* Check if 8-bit byte-address select is available.
* This clobbers WRP 0.
@@ -268,9 +296,6 @@
if (debug_arch < ARM_DEBUG_ARCH_V7_ECP14)
goto out;
- if (enable_monitor_mode())
- goto out;
-
memset(&ctrl, 0, sizeof(ctrl));
ctrl.len = ARM_BREAKPOINT_LEN_8;
ctrl_reg = encode_ctrl_reg(ctrl);
@@ -290,23 +315,6 @@
}
/*
- * Handler for reactivating a suspended watchpoint when the single
- * step `mismatch' breakpoint is triggered.
- */
-static void wp_single_step_handler(struct perf_event *bp, int unused,
- struct perf_sample_data *data,
- struct pt_regs *regs)
-{
- perf_event_enable(counter_arch_bp(bp)->suspended_wp);
- unregister_hw_breakpoint(bp);
-}
-
-static int bp_is_single_step(struct perf_event *bp)
-{
- return bp->overflow_handler == wp_single_step_handler;
-}
-
-/*
* Install a perf counter breakpoint.
*/
int arch_install_hw_breakpoint(struct perf_event *bp)
@@ -314,30 +322,41 @@
struct arch_hw_breakpoint *info = counter_arch_bp(bp);
struct perf_event **slot, **slots;
int i, max_slots, ctrl_base, val_base, ret = 0;
+ u32 addr, ctrl;
/* Ensure that we are in monitor mode and halting mode is disabled. */
ret = enable_monitor_mode();
if (ret)
goto out;
+ addr = info->address;
+ ctrl = encode_ctrl_reg(info->ctrl) | 0x1;
+
if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
/* Breakpoint */
ctrl_base = ARM_BASE_BCR;
val_base = ARM_BASE_BVR;
- slots = __get_cpu_var(bp_on_reg);
- max_slots = core_num_brps - 1;
-
- if (bp_is_single_step(bp)) {
- info->ctrl.mismatch = 1;
- i = max_slots;
- slots[i] = bp;
- goto setup;
+ slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+ max_slots = core_num_brps;
+ if (info->step_ctrl.enabled) {
+ /* Override the breakpoint data with the step data. */
+ addr = info->trigger & ~0x3;
+ ctrl = encode_ctrl_reg(info->step_ctrl);
}
} else {
/* Watchpoint */
- ctrl_base = ARM_BASE_WCR;
- val_base = ARM_BASE_WVR;
- slots = __get_cpu_var(wp_on_reg);
+ if (info->step_ctrl.enabled) {
+ /* Install into the reserved breakpoint region. */
+ ctrl_base = ARM_BASE_BCR + core_num_brps;
+ val_base = ARM_BASE_BVR + core_num_brps;
+ /* Override the watchpoint data with the step data. */
+ addr = info->trigger & ~0x3;
+ ctrl = encode_ctrl_reg(info->step_ctrl);
+ } else {
+ ctrl_base = ARM_BASE_WCR;
+ val_base = ARM_BASE_WVR;
+ }
+ slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
max_slots = core_num_wrps;
}
@@ -355,12 +374,11 @@
goto out;
}
-setup:
/* Setup the address register. */
- write_wb_reg(val_base + i, info->address);
+ write_wb_reg(val_base + i, addr);
/* Setup the control register. */
- write_wb_reg(ctrl_base + i, encode_ctrl_reg(info->ctrl) | 0x1);
+ write_wb_reg(ctrl_base + i, ctrl);
out:
return ret;
@@ -375,18 +393,15 @@
if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
/* Breakpoint */
base = ARM_BASE_BCR;
- slots = __get_cpu_var(bp_on_reg);
- max_slots = core_num_brps - 1;
-
- if (bp_is_single_step(bp)) {
- i = max_slots;
- slots[i] = NULL;
- goto reset;
- }
+ slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+ max_slots = core_num_brps;
} else {
/* Watchpoint */
- base = ARM_BASE_WCR;
- slots = __get_cpu_var(wp_on_reg);
+ if (info->step_ctrl.enabled)
+ base = ARM_BASE_BCR + core_num_brps;
+ else
+ base = ARM_BASE_WCR;
+ slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
max_slots = core_num_wrps;
}
@@ -403,7 +418,6 @@
if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot"))
return;
-reset:
/* Reset the control register. */
write_wb_reg(base + i, 0);
}
@@ -537,12 +551,23 @@
return -EINVAL;
}
+ /*
+ * Breakpoints must be of length 2 (thumb) or 4 (ARM) bytes.
+ * Watchpoints can be of length 1, 2, 4 or 8 bytes if supported
+ * by the hardware and must be aligned to the appropriate number of
+ * bytes.
+ */
+ if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE &&
+ info->ctrl.len != ARM_BREAKPOINT_LEN_2 &&
+ info->ctrl.len != ARM_BREAKPOINT_LEN_4)
+ return -EINVAL;
+
/* Address */
info->address = bp->attr.bp_addr;
/* Privilege */
info->ctrl.privilege = ARM_BREAKPOINT_USER;
- if (arch_check_bp_in_kernelspace(bp) && !bp_is_single_step(bp))
+ if (arch_check_bp_in_kernelspace(bp))
info->ctrl.privilege |= ARM_BREAKPOINT_PRIV;
/* Enabled? */
@@ -561,7 +586,7 @@
{
struct arch_hw_breakpoint *info = counter_arch_bp(bp);
int ret = 0;
- u32 bytelen, max_len, offset, alignment_mask = 0x3;
+ u32 offset, alignment_mask = 0x3;
/* Build the arch_hw_breakpoint. */
ret = arch_build_bp_info(bp);
@@ -571,84 +596,85 @@
/* Check address alignment. */
if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
alignment_mask = 0x7;
- if (info->address & alignment_mask) {
- /*
- * Try to fix the alignment. This may result in a length
- * that is too large, so we must check for that.
- */
- bytelen = get_hbp_len(info->ctrl.len);
- max_len = info->ctrl.type == ARM_BREAKPOINT_EXECUTE ? 4 :
- max_watchpoint_len;
-
- if (max_len >= 8)
- offset = info->address & 0x7;
- else
- offset = info->address & 0x3;
-
- if (bytelen > (1 << ((max_len - (offset + 1)) >> 1))) {
- ret = -EFBIG;
- goto out;
- }
-
- info->ctrl.len <<= offset;
- info->address &= ~offset;
-
- pr_debug("breakpoint alignment fixup: length = 0x%x, "
- "address = 0x%x\n", info->ctrl.len, info->address);
+ offset = info->address & alignment_mask;
+ switch (offset) {
+ case 0:
+ /* Aligned */
+ break;
+ case 1:
+ /* Allow single byte watchpoint. */
+ if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
+ break;
+ case 2:
+ /* Allow halfword watchpoints and breakpoints. */
+ if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
+ break;
+ default:
+ ret = -EINVAL;
+ goto out;
}
+ info->address &= ~alignment_mask;
+ info->ctrl.len <<= offset;
+
/*
* Currently we rely on an overflow handler to take
* care of single-stepping the breakpoint when it fires.
* In the case of userspace breakpoints on a core with V7 debug,
- * we can use the mismatch feature as a poor-man's hardware single-step.
+ * we can use the mismatch feature as a poor-man's hardware
+ * single-step, but this only works for per-task breakpoints.
*/
if (WARN_ONCE(!bp->overflow_handler &&
- (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_bps()),
+ (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps()
+ || !bp->hw.bp_target),
"overflow handler required but none found")) {
ret = -EINVAL;
- goto out;
}
out:
return ret;
}
-static void update_mismatch_flag(int idx, int flag)
+/*
+ * Enable/disable single-stepping over the breakpoint bp at address addr.
+ */
+static void enable_single_step(struct perf_event *bp, u32 addr)
{
- struct perf_event *bp = __get_cpu_var(bp_on_reg[idx]);
- struct arch_hw_breakpoint *info;
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
- if (bp == NULL)
- return;
+ arch_uninstall_hw_breakpoint(bp);
+ info->step_ctrl.mismatch = 1;
+ info->step_ctrl.len = ARM_BREAKPOINT_LEN_4;
+ info->step_ctrl.type = ARM_BREAKPOINT_EXECUTE;
+ info->step_ctrl.privilege = info->ctrl.privilege;
+ info->step_ctrl.enabled = 1;
+ info->trigger = addr;
+ arch_install_hw_breakpoint(bp);
+}
- info = counter_arch_bp(bp);
-
- /* Update the mismatch field to enter/exit `single-step' mode */
- if (!bp->overflow_handler && info->ctrl.mismatch != flag) {
- info->ctrl.mismatch = flag;
- write_wb_reg(ARM_BASE_BCR + idx, encode_ctrl_reg(info->ctrl) | 0x1);
- }
+static void disable_single_step(struct perf_event *bp)
+{
+ arch_uninstall_hw_breakpoint(bp);
+ counter_arch_bp(bp)->step_ctrl.enabled = 0;
+ arch_install_hw_breakpoint(bp);
}
static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
{
int i;
- struct perf_event *bp, **slots = __get_cpu_var(wp_on_reg);
+ struct perf_event *wp, **slots;
struct arch_hw_breakpoint *info;
- struct perf_event_attr attr;
+
+ slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
/* Without a disassembler, we can only handle 1 watchpoint. */
BUG_ON(core_num_wrps > 1);
- hw_breakpoint_init(&attr);
- attr.bp_addr = regs->ARM_pc & ~0x3;
- attr.bp_len = HW_BREAKPOINT_LEN_4;
- attr.bp_type = HW_BREAKPOINT_X;
-
for (i = 0; i < core_num_wrps; ++i) {
rcu_read_lock();
- if (slots[i] == NULL) {
+ wp = slots[i];
+
+ if (wp == NULL) {
rcu_read_unlock();
continue;
}
@@ -658,87 +684,121 @@
* single watchpoint, we can set the trigger to the lowest
* possible faulting address.
*/
- info = counter_arch_bp(slots[i]);
- info->trigger = slots[i]->attr.bp_addr;
+ info = counter_arch_bp(wp);
+ info->trigger = wp->attr.bp_addr;
pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
- perf_bp_event(slots[i], regs);
+ perf_bp_event(wp, regs);
/*
* If no overflow handler is present, insert a temporary
* mismatch breakpoint so we can single-step over the
* watchpoint trigger.
*/
- if (!slots[i]->overflow_handler) {
- bp = register_user_hw_breakpoint(&attr,
- wp_single_step_handler,
- current);
- counter_arch_bp(bp)->suspended_wp = slots[i];
- perf_event_disable(slots[i]);
- }
+ if (!wp->overflow_handler)
+ enable_single_step(wp, instruction_pointer(regs));
rcu_read_unlock();
}
}
+static void watchpoint_single_step_handler(unsigned long pc)
+{
+ int i;
+ struct perf_event *wp, **slots;
+ struct arch_hw_breakpoint *info;
+
+ slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
+
+ for (i = 0; i < core_num_reserved_brps; ++i) {
+ rcu_read_lock();
+
+ wp = slots[i];
+
+ if (wp == NULL)
+ goto unlock;
+
+ info = counter_arch_bp(wp);
+ if (!info->step_ctrl.enabled)
+ goto unlock;
+
+ /*
+ * Restore the original watchpoint if we've completed the
+ * single-step.
+ */
+ if (info->trigger != pc)
+ disable_single_step(wp);
+
+unlock:
+ rcu_read_unlock();
+ }
+}
+
static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
{
int i;
- int mismatch;
u32 ctrl_reg, val, addr;
- struct perf_event *bp, **slots = __get_cpu_var(bp_on_reg);
+ struct perf_event *bp, **slots;
struct arch_hw_breakpoint *info;
struct arch_hw_breakpoint_ctrl ctrl;
+ slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+
/* The exception entry code places the amended lr in the PC. */
addr = regs->ARM_pc;
+ /* Check the currently installed breakpoints first. */
for (i = 0; i < core_num_brps; ++i) {
rcu_read_lock();
bp = slots[i];
- if (bp == NULL) {
- rcu_read_unlock();
- continue;
- }
+ if (bp == NULL)
+ goto unlock;
- mismatch = 0;
+ info = counter_arch_bp(bp);
/* Check if the breakpoint value matches. */
val = read_wb_reg(ARM_BASE_BVR + i);
if (val != (addr & ~0x3))
- goto unlock;
+ goto mismatch;
/* Possible match, check the byte address select to confirm. */
ctrl_reg = read_wb_reg(ARM_BASE_BCR + i);
decode_ctrl_reg(ctrl_reg, &ctrl);
if ((1 << (addr & 0x3)) & ctrl.len) {
- mismatch = 1;
- info = counter_arch_bp(bp);
info->trigger = addr;
- }
-
-unlock:
- if ((mismatch && !info->ctrl.mismatch) || bp_is_single_step(bp)) {
pr_debug("breakpoint fired: address = 0x%x\n", addr);
perf_bp_event(bp, regs);
+ if (!bp->overflow_handler)
+ enable_single_step(bp, addr);
+ goto unlock;
}
- update_mismatch_flag(i, mismatch);
+mismatch:
+ /* If we're stepping a breakpoint, it can now be restored. */
+ if (info->step_ctrl.enabled)
+ disable_single_step(bp);
+unlock:
rcu_read_unlock();
}
+
+ /* Handle any pending watchpoint single-step breakpoints. */
+ watchpoint_single_step_handler(addr);
}
/*
* Called from either the Data Abort Handler [watchpoint] or the
- * Prefetch Abort Handler [breakpoint].
+ * Prefetch Abort Handler [breakpoint] with preemption disabled.
*/
static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
- int ret = 1; /* Unhandled fault. */
+ int ret = 0;
u32 dscr;
+ /* We must be called with preemption disabled. */
+ WARN_ON(preemptible());
+
/* We only handle watchpoints and hardware breakpoints. */
ARM_DBG_READ(c1, 0, dscr);
@@ -753,25 +813,47 @@
watchpoint_handler(addr, regs);
break;
default:
- goto out;
+ ret = 1; /* Unhandled fault. */
}
- ret = 0;
-out:
+ /*
+ * Re-enable preemption after it was disabled in the
+ * low-level exception handling code.
+ */
+ preempt_enable();
+
return ret;
}
/*
* One-time initialisation.
*/
-static void __init reset_ctrl_regs(void *unused)
+static void reset_ctrl_regs(void *unused)
{
int i;
+ /*
+ * v7 debug contains save and restore registers so that debug state
+ * can be maintained across low-power modes without leaving
+ * the debug logic powered up. It is IMPLEMENTATION DEFINED whether
+ * we can write to the debug registers out of reset, so we must
+ * unlock the OS Lock Access Register to avoid taking undefined
+ * instruction exceptions later on.
+ */
+ if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
+ /*
+ * Unconditionally clear the lock by writing a value
+ * other than 0xC5ACCE55 to the access register.
+ */
+ asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
+ isb();
+ }
+
if (enable_monitor_mode())
return;
- for (i = 0; i < core_num_brps; ++i) {
+ /* We must also reset any reserved registers. */
+ for (i = 0; i < core_num_brps + core_num_reserved_brps; ++i) {
write_wb_reg(ARM_BASE_BCR + i, 0UL);
write_wb_reg(ARM_BASE_BVR + i, 0UL);
}
@@ -782,45 +864,57 @@
}
}
+static int __cpuinit dbg_reset_notify(struct notifier_block *self,
+ unsigned long action, void *cpu)
+{
+ if (action == CPU_ONLINE)
+ smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1);
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata dbg_reset_nb = {
+ .notifier_call = dbg_reset_notify,
+};
+
static int __init arch_hw_breakpoint_init(void)
{
- int ret = 0;
u32 dscr;
debug_arch = get_debug_arch();
if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) {
pr_info("debug architecture 0x%x unsupported.\n", debug_arch);
- ret = -ENODEV;
- goto out;
+ return 0;
}
/* Determine how many BRPs/WRPs are available. */
core_num_brps = get_num_brps();
+ core_num_reserved_brps = get_num_reserved_brps();
core_num_wrps = get_num_wrps();
pr_info("found %d breakpoint and %d watchpoint registers.\n",
- core_num_brps, core_num_wrps);
+ core_num_brps + core_num_reserved_brps, core_num_wrps);
- if (core_has_mismatch_bps())
- pr_info("1 breakpoint reserved for watchpoint single-step.\n");
+ if (core_num_reserved_brps)
+ pr_info("%d breakpoint(s) reserved for watchpoint "
+ "single-step.\n", core_num_reserved_brps);
ARM_DBG_READ(c1, 0, dscr);
if (dscr & ARM_DSCR_HDBGEN) {
pr_warning("halting debug mode enabled. Assuming maximum "
"watchpoint size of 4 bytes.");
} else {
- /* Work out the maximum supported watchpoint length. */
- max_watchpoint_len = get_max_wp_len();
- pr_info("maximum watchpoint size is %u bytes.\n",
- max_watchpoint_len);
-
/*
* Reset the breakpoint resources. We assume that a halting
* debugger will leave the world in a nice state for us.
*/
smp_call_function(reset_ctrl_regs, NULL, 1);
reset_ctrl_regs(NULL);
+
+ /* Work out the maximum supported watchpoint length. */
+ max_watchpoint_len = get_max_wp_len();
+ pr_info("maximum watchpoint size is %u bytes.\n",
+ max_watchpoint_len);
}
/* Register debug fault handler. */
@@ -829,8 +923,9 @@
hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
"breakpoint debug exception");
-out:
- return ret;
+ /* Register hotplug notifier. */
+ register_cpu_notifier(&dbg_reset_nb);
+ return 0;
}
arch_initcall(arch_hw_breakpoint_init);
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 36ad3be..6d616333 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -35,6 +35,7 @@
#include <linux/list.h>
#include <linux/kallsyms.h>
#include <linux/proc_fs.h>
+#include <linux/ftrace.h>
#include <asm/system.h>
#include <asm/mach/irq.h>
@@ -105,7 +106,8 @@
* come via this function. Instead, they should provide their
* own 'handler'
*/
-asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+asmlinkage void __exception_irq_entry
+asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index b63b528..7fa3bb0 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -19,6 +19,14 @@
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
+#if defined(CONFIG_CPU_PJ4)
+#define PJ4(code...) code
+#define XSC(code...)
+#else
+#define PJ4(code...)
+#define XSC(code...) code
+#endif
+
#define MMX_WR0 (0x00)
#define MMX_WR1 (0x08)
#define MMX_WR2 (0x10)
@@ -58,11 +66,17 @@
ENTRY(iwmmxt_task_enable)
- mrc p15, 0, r2, c15, c1, 0
- tst r2, #0x3 @ CP0 and CP1 accessible?
+ XSC(mrc p15, 0, r2, c15, c1, 0)
+ PJ4(mrc p15, 0, r2, c1, c0, 2)
+ @ CP0 and CP1 accessible?
+ XSC(tst r2, #0x3)
+ PJ4(tst r2, #0xf)
movne pc, lr @ if so no business here
- orr r2, r2, #0x3 @ enable access to CP0 and CP1
- mcr p15, 0, r2, c15, c1, 0
+ @ enable access to CP0 and CP1
+ XSC(orr r2, r2, #0x3)
+ XSC(mcr p15, 0, r2, c15, c1, 0)
+ PJ4(orr r2, r2, #0xf)
+ PJ4(mcr p15, 0, r2, c1, c0, 2)
ldr r3, =concan_owner
add r0, r10, #TI_IWMMXT_STATE @ get task Concan save area
@@ -179,17 +193,26 @@
teqne r1, r2 @ or specified one?
bne 1f @ no: quit
- mrc p15, 0, r4, c15, c1, 0
- orr r4, r4, #0x3 @ enable access to CP0 and CP1
- mcr p15, 0, r4, c15, c1, 0
+ @ enable access to CP0 and CP1
+ XSC(mrc p15, 0, r4, c15, c1, 0)
+ XSC(orr r4, r4, #0xf)
+ XSC(mcr p15, 0, r4, c15, c1, 0)
+ PJ4(mrc p15, 0, r4, c1, c0, 2)
+ PJ4(orr r4, r4, #0x3)
+ PJ4(mcr p15, 0, r4, c1, c0, 2)
+
mov r0, #0 @ nothing to load
str r0, [r3] @ no more current owner
mrc p15, 0, r2, c2, c0, 0
mov r2, r2 @ cpwait
bl concan_save
- bic r4, r4, #0x3 @ disable access to CP0 and CP1
- mcr p15, 0, r4, c15, c1, 0
+ @ disable access to CP0 and CP1
+ XSC(bic r4, r4, #0x3)
+ XSC(mcr p15, 0, r4, c15, c1, 0)
+ PJ4(bic r4, r4, #0xf)
+ PJ4(mcr p15, 0, r4, c1, c0, 2)
+
mrc p15, 0, r2, c2, c0, 0
mov r2, r2 @ cpwait
@@ -277,8 +300,11 @@
*/
ENTRY(iwmmxt_task_switch)
- mrc p15, 0, r1, c15, c1, 0
- tst r1, #0x3 @ CP0 and CP1 accessible?
+ XSC(mrc p15, 0, r1, c15, c1, 0)
+ PJ4(mrc p15, 0, r1, c1, c0, 2)
+ @ CP0 and CP1 accessible?
+ XSC(tst r1, #0x3)
+ PJ4(tst r1, #0xf)
bne 1f @ yes: block them for next task
ldr r2, =concan_owner
@@ -287,8 +313,11 @@
teq r2, r3 @ next task owns it?
movne pc, lr @ no: leave Concan disabled
-1: eor r1, r1, #3 @ flip Concan access
- mcr p15, 0, r1, c15, c1, 0
+1: @ flip Conan access
+ XSC(eor r1, r1, #0x3)
+ XSC(mcr p15, 0, r1, c15, c1, 0)
+ PJ4(eor r1, r1, #0xf)
+ PJ4(mcr p15, 0, r1, c1, c0, 2)
mrc p15, 0, r1, c2, c0, 0
sub pc, lr, r1, lsr #32 @ cpwait and return
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 07a5035..624e2a5 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -4,9 +4,7 @@
* ARM performance counter support.
*
* Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
- *
- * ARMv7 support: Jean Pihet <jpihet@mvista.com>
- * 2010 (c) MontaVista Software, LLC.
+ * Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com>
*
* This code is based on the sparc64 perf event code, which is in turn based
* on the x86 code. Callchain code is based on the ARM OProfile backtrace
@@ -34,7 +32,7 @@
* Hardware lock to serialize accesses to PMU registers. Needed for the
* read/modify/write sequences.
*/
-DEFINE_SPINLOCK(pmu_lock);
+static DEFINE_RAW_SPINLOCK(pmu_lock);
/*
* ARMv6 supports a maximum of 3 events, starting from index 1. If we add
@@ -67,31 +65,25 @@
*/
unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
};
-DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-/* PMU names. */
-static const char *arm_pmu_names[] = {
- [ARM_PERF_PMU_ID_XSCALE1] = "xscale1",
- [ARM_PERF_PMU_ID_XSCALE2] = "xscale2",
- [ARM_PERF_PMU_ID_V6] = "v6",
- [ARM_PERF_PMU_ID_V6MP] = "v6mpcore",
- [ARM_PERF_PMU_ID_CA8] = "ARMv7 Cortex-A8",
- [ARM_PERF_PMU_ID_CA9] = "ARMv7 Cortex-A9",
-};
+static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
struct arm_pmu {
enum arm_perf_pmu_ids id;
+ const char *name;
irqreturn_t (*handle_irq)(int irq_num, void *dev);
void (*enable)(struct hw_perf_event *evt, int idx);
void (*disable)(struct hw_perf_event *evt, int idx);
- int (*event_map)(int evt);
- u64 (*raw_event)(u64);
int (*get_event_idx)(struct cpu_hw_events *cpuc,
struct hw_perf_event *hwc);
u32 (*read_counter)(int idx);
void (*write_counter)(int idx, u32 val);
void (*start)(void);
void (*stop)(void);
+ const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX];
+ const unsigned (*event_map)[PERF_COUNT_HW_MAX];
+ u32 raw_event_mask;
int num_events;
u64 max_period;
};
@@ -136,10 +128,6 @@
#define CACHE_OP_UNSUPPORTED 0xFFFF
-static unsigned armpmu_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX];
-
static int
armpmu_map_cache_event(u64 config)
{
@@ -157,7 +145,7 @@
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
- ret = (int)armpmu_perf_cache_map[cache_type][cache_op][cache_result];
+ ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result];
if (ret == CACHE_OP_UNSUPPORTED)
return -ENOENT;
@@ -166,6 +154,19 @@
}
static int
+armpmu_map_event(u64 config)
+{
+ int mapping = (*armpmu->event_map)[config];
+ return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping;
+}
+
+static int
+armpmu_map_raw_event(u64 config)
+{
+ return (int)(config & armpmu->raw_event_mask);
+}
+
+static int
armpmu_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc,
int idx)
@@ -458,11 +459,11 @@
/* Decode the generic type into an ARM event identifier. */
if (PERF_TYPE_HARDWARE == event->attr.type) {
- mapping = armpmu->event_map(event->attr.config);
+ mapping = armpmu_map_event(event->attr.config);
} else if (PERF_TYPE_HW_CACHE == event->attr.type) {
mapping = armpmu_map_cache_event(event->attr.config);
} else if (PERF_TYPE_RAW == event->attr.type) {
- mapping = armpmu->raw_event(event->attr.config);
+ mapping = armpmu_map_raw_event(event->attr.config);
} else {
pr_debug("event type %x not supported\n", event->attr.type);
return -EOPNOTSUPP;
@@ -603,2366 +604,10 @@
.read = armpmu_read,
};
-/*
- * ARMv6 Performance counter handling code.
- *
- * ARMv6 has 2 configurable performance counters and a single cycle counter.
- * They all share a single reset bit but can be written to zero so we can use
- * that for a reset.
- *
- * The counters can't be individually enabled or disabled so when we remove
- * one event and replace it with another we could get spurious counts from the
- * wrong event. However, we can take advantage of the fact that the
- * performance counters can export events to the event bus, and the event bus
- * itself can be monitored. This requires that we *don't* export the events to
- * the event bus. The procedure for disabling a configurable counter is:
- * - change the counter to count the ETMEXTOUT[0] signal (0x20). This
- * effectively stops the counter from counting.
- * - disable the counter's interrupt generation (each counter has it's
- * own interrupt enable bit).
- * Once stopped, the counter value can be written as 0 to reset.
- *
- * To enable a counter:
- * - enable the counter's interrupt generation.
- * - set the new event type.
- *
- * Note: the dedicated cycle counter only counts cycles and can't be
- * enabled/disabled independently of the others. When we want to disable the
- * cycle counter, we have to just disable the interrupt reporting and start
- * ignoring that counter. When re-enabling, we have to reset the value and
- * enable the interrupt.
- */
-
-enum armv6_perf_types {
- ARMV6_PERFCTR_ICACHE_MISS = 0x0,
- ARMV6_PERFCTR_IBUF_STALL = 0x1,
- ARMV6_PERFCTR_DDEP_STALL = 0x2,
- ARMV6_PERFCTR_ITLB_MISS = 0x3,
- ARMV6_PERFCTR_DTLB_MISS = 0x4,
- ARMV6_PERFCTR_BR_EXEC = 0x5,
- ARMV6_PERFCTR_BR_MISPREDICT = 0x6,
- ARMV6_PERFCTR_INSTR_EXEC = 0x7,
- ARMV6_PERFCTR_DCACHE_HIT = 0x9,
- ARMV6_PERFCTR_DCACHE_ACCESS = 0xA,
- ARMV6_PERFCTR_DCACHE_MISS = 0xB,
- ARMV6_PERFCTR_DCACHE_WBACK = 0xC,
- ARMV6_PERFCTR_SW_PC_CHANGE = 0xD,
- ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF,
- ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10,
- ARMV6_PERFCTR_LSU_FULL_STALL = 0x11,
- ARMV6_PERFCTR_WBUF_DRAINED = 0x12,
- ARMV6_PERFCTR_CPU_CYCLES = 0xFF,
- ARMV6_PERFCTR_NOP = 0x20,
-};
-
-enum armv6_counters {
- ARMV6_CYCLE_COUNTER = 1,
- ARMV6_COUNTER0,
- ARMV6_COUNTER1,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
- [C(L1D)] = {
- /*
- * The performance counters don't differentiate between read
- * and write accesses/misses so this isn't strictly correct,
- * but it's the best we can do. Writes and reads get
- * combined.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(L1I)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(LL)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(DTLB)] = {
- /*
- * The ARM performance counters can count micro DTLB misses,
- * micro ITLB misses and main TLB misses. There isn't an event
- * for TLB misses, so use the micro misses here and if users
- * want the main TLB misses they can use a raw counter.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(ITLB)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(BPU)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
-};
-
-enum armv6mpcore_perf_types {
- ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0,
- ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1,
- ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2,
- ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3,
- ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4,
- ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5,
- ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6,
- ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7,
- ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8,
- ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
- ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB,
- ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
- ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD,
- ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
- ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF,
- ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10,
- ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
- ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12,
- ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13,
- ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
- [C(L1D)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] =
- ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
- [C(RESULT_MISS)] =
- ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] =
- ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
- [C(RESULT_MISS)] =
- ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(L1I)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(LL)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(DTLB)] = {
- /*
- * The ARM performance counters can count micro DTLB misses,
- * micro ITLB misses and main TLB misses. There isn't an event
- * for TLB misses, so use the micro misses here and if users
- * want the main TLB misses they can use a raw counter.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(ITLB)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(BPU)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
-};
-
-static inline unsigned long
-armv6_pmcr_read(void)
-{
- u32 val;
- asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val));
- return val;
-}
-
-static inline void
-armv6_pmcr_write(unsigned long val)
-{
- asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val));
-}
-
-#define ARMV6_PMCR_ENABLE (1 << 0)
-#define ARMV6_PMCR_CTR01_RESET (1 << 1)
-#define ARMV6_PMCR_CCOUNT_RESET (1 << 2)
-#define ARMV6_PMCR_CCOUNT_DIV (1 << 3)
-#define ARMV6_PMCR_COUNT0_IEN (1 << 4)
-#define ARMV6_PMCR_COUNT1_IEN (1 << 5)
-#define ARMV6_PMCR_CCOUNT_IEN (1 << 6)
-#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8)
-#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9)
-#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10)
-#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20
-#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
-#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12
-#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
-
-#define ARMV6_PMCR_OVERFLOWED_MASK \
- (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
- ARMV6_PMCR_CCOUNT_OVERFLOW)
-
-static inline int
-armv6_pmcr_has_overflowed(unsigned long pmcr)
-{
- return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK);
-}
-
-static inline int
-armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
- enum armv6_counters counter)
-{
- int ret = 0;
-
- if (ARMV6_CYCLE_COUNTER == counter)
- ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
- else if (ARMV6_COUNTER0 == counter)
- ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
- else if (ARMV6_COUNTER1 == counter)
- ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
- else
- WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
- return ret;
-}
-
-static inline u32
-armv6pmu_read_counter(int counter)
-{
- unsigned long value = 0;
-
- if (ARMV6_CYCLE_COUNTER == counter)
- asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value));
- else if (ARMV6_COUNTER0 == counter)
- asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value));
- else if (ARMV6_COUNTER1 == counter)
- asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value));
- else
- WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
- return value;
-}
-
-static inline void
-armv6pmu_write_counter(int counter,
- u32 value)
-{
- if (ARMV6_CYCLE_COUNTER == counter)
- asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value));
- else if (ARMV6_COUNTER0 == counter)
- asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value));
- else if (ARMV6_COUNTER1 == counter)
- asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value));
- else
- WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-}
-
-void
-armv6pmu_enable_event(struct hw_perf_event *hwc,
- int idx)
-{
- unsigned long val, mask, evt, flags;
-
- if (ARMV6_CYCLE_COUNTER == idx) {
- mask = 0;
- evt = ARMV6_PMCR_CCOUNT_IEN;
- } else if (ARMV6_COUNTER0 == idx) {
- mask = ARMV6_PMCR_EVT_COUNT0_MASK;
- evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
- ARMV6_PMCR_COUNT0_IEN;
- } else if (ARMV6_COUNTER1 == idx) {
- mask = ARMV6_PMCR_EVT_COUNT1_MASK;
- evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
- ARMV6_PMCR_COUNT1_IEN;
- } else {
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- /*
- * Mask out the current event and set the counter to count the event
- * that we're interested in.
- */
- spin_lock_irqsave(&pmu_lock, flags);
- val = armv6_pmcr_read();
- val &= ~mask;
- val |= evt;
- armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static irqreturn_t
-armv6pmu_handle_irq(int irq_num,
- void *dev)
-{
- unsigned long pmcr = armv6_pmcr_read();
- struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
- struct pt_regs *regs;
- int idx;
-
- if (!armv6_pmcr_has_overflowed(pmcr))
- return IRQ_NONE;
-
- regs = get_irq_regs();
-
- /*
- * The interrupts are cleared by writing the overflow flags back to
- * the control register. All of the other bits don't have any effect
- * if they are rewritten, so write the whole value back.
- */
- armv6_pmcr_write(pmcr);
-
- perf_sample_data_init(&data, 0);
-
- cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
- struct perf_event *event = cpuc->events[idx];
- struct hw_perf_event *hwc;
-
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
- /*
- * We have a single interrupt for all counters. Check that
- * each counter has overflowed before we process it.
- */
- if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
- continue;
-
- hwc = &event->hw;
- armpmu_event_update(event, hwc, idx);
- data.period = event->hw.last_period;
- if (!armpmu_event_set_period(event, hwc, idx))
- continue;
-
- if (perf_event_overflow(event, 0, &data, regs))
- armpmu->disable(hwc, idx);
- }
-
- /*
- * Handle the pending perf events.
- *
- * Note: this call *must* be run with interrupts disabled. For
- * platforms that can have the PMU interrupts raised as an NMI, this
- * will not work.
- */
- irq_work_run();
-
- return IRQ_HANDLED;
-}
-
-static void
-armv6pmu_start(void)
-{
- unsigned long flags, val;
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = armv6_pmcr_read();
- val |= ARMV6_PMCR_ENABLE;
- armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-void
-armv6pmu_stop(void)
-{
- unsigned long flags, val;
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = armv6_pmcr_read();
- val &= ~ARMV6_PMCR_ENABLE;
- armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline int
-armv6pmu_event_map(int config)
-{
- int mapping = armv6_perf_map[config];
- if (HW_OP_UNSUPPORTED == mapping)
- mapping = -EOPNOTSUPP;
- return mapping;
-}
-
-static inline int
-armv6mpcore_pmu_event_map(int config)
-{
- int mapping = armv6mpcore_perf_map[config];
- if (HW_OP_UNSUPPORTED == mapping)
- mapping = -EOPNOTSUPP;
- return mapping;
-}
-
-static u64
-armv6pmu_raw_event(u64 config)
-{
- return config & 0xff;
-}
-
-static int
-armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
- struct hw_perf_event *event)
-{
- /* Always place a cycle counter into the cycle counter. */
- if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
- if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
- return -EAGAIN;
-
- return ARMV6_CYCLE_COUNTER;
- } else {
- /*
- * For anything other than a cycle counter, try and use
- * counter0 and counter1.
- */
- if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) {
- return ARMV6_COUNTER1;
- }
-
- if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) {
- return ARMV6_COUNTER0;
- }
-
- /* The counters are all in use. */
- return -EAGAIN;
- }
-}
-
-static void
-armv6pmu_disable_event(struct hw_perf_event *hwc,
- int idx)
-{
- unsigned long val, mask, evt, flags;
-
- if (ARMV6_CYCLE_COUNTER == idx) {
- mask = ARMV6_PMCR_CCOUNT_IEN;
- evt = 0;
- } else if (ARMV6_COUNTER0 == idx) {
- mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
- evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
- } else if (ARMV6_COUNTER1 == idx) {
- mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
- evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
- } else {
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- /*
- * Mask out the current event and set the counter to count the number
- * of ETM bus signal assertion cycles. The external reporting should
- * be disabled and so this should never increment.
- */
- spin_lock_irqsave(&pmu_lock, flags);
- val = armv6_pmcr_read();
- val &= ~mask;
- val |= evt;
- armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
- int idx)
-{
- unsigned long val, mask, flags, evt = 0;
-
- if (ARMV6_CYCLE_COUNTER == idx) {
- mask = ARMV6_PMCR_CCOUNT_IEN;
- } else if (ARMV6_COUNTER0 == idx) {
- mask = ARMV6_PMCR_COUNT0_IEN;
- } else if (ARMV6_COUNTER1 == idx) {
- mask = ARMV6_PMCR_COUNT1_IEN;
- } else {
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- /*
- * Unlike UP ARMv6, we don't have a way of stopping the counters. We
- * simply disable the interrupt reporting.
- */
- spin_lock_irqsave(&pmu_lock, flags);
- val = armv6_pmcr_read();
- val &= ~mask;
- val |= evt;
- armv6_pmcr_write(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static const struct arm_pmu armv6pmu = {
- .id = ARM_PERF_PMU_ID_V6,
- .handle_irq = armv6pmu_handle_irq,
- .enable = armv6pmu_enable_event,
- .disable = armv6pmu_disable_event,
- .event_map = armv6pmu_event_map,
- .raw_event = armv6pmu_raw_event,
- .read_counter = armv6pmu_read_counter,
- .write_counter = armv6pmu_write_counter,
- .get_event_idx = armv6pmu_get_event_idx,
- .start = armv6pmu_start,
- .stop = armv6pmu_stop,
- .num_events = 3,
- .max_period = (1LLU << 32) - 1,
-};
-
-/*
- * ARMv6mpcore is almost identical to single core ARMv6 with the exception
- * that some of the events have different enumerations and that there is no
- * *hack* to stop the programmable counters. To stop the counters we simply
- * disable the interrupt reporting and update the event. When unthrottling we
- * reset the period and enable the interrupt reporting.
- */
-static const struct arm_pmu armv6mpcore_pmu = {
- .id = ARM_PERF_PMU_ID_V6MP,
- .handle_irq = armv6pmu_handle_irq,
- .enable = armv6pmu_enable_event,
- .disable = armv6mpcore_pmu_disable_event,
- .event_map = armv6mpcore_pmu_event_map,
- .raw_event = armv6pmu_raw_event,
- .read_counter = armv6pmu_read_counter,
- .write_counter = armv6pmu_write_counter,
- .get_event_idx = armv6pmu_get_event_idx,
- .start = armv6pmu_start,
- .stop = armv6pmu_stop,
- .num_events = 3,
- .max_period = (1LLU << 32) - 1,
-};
-
-/*
- * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
- *
- * Copied from ARMv6 code, with the low level code inspired
- * by the ARMv7 Oprofile code.
- *
- * Cortex-A8 has up to 4 configurable performance counters and
- * a single cycle counter.
- * Cortex-A9 has up to 31 configurable performance counters and
- * a single cycle counter.
- *
- * All counters can be enabled/disabled and IRQ masked separately. The cycle
- * counter and all 4 performance counters together can be reset separately.
- */
-
-/* Common ARMv7 event types */
-enum armv7_perf_types {
- ARMV7_PERFCTR_PMNC_SW_INCR = 0x00,
- ARMV7_PERFCTR_IFETCH_MISS = 0x01,
- ARMV7_PERFCTR_ITLB_MISS = 0x02,
- ARMV7_PERFCTR_DCACHE_REFILL = 0x03,
- ARMV7_PERFCTR_DCACHE_ACCESS = 0x04,
- ARMV7_PERFCTR_DTLB_REFILL = 0x05,
- ARMV7_PERFCTR_DREAD = 0x06,
- ARMV7_PERFCTR_DWRITE = 0x07,
-
- ARMV7_PERFCTR_EXC_TAKEN = 0x09,
- ARMV7_PERFCTR_EXC_EXECUTED = 0x0A,
- ARMV7_PERFCTR_CID_WRITE = 0x0B,
- /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
- * It counts:
- * - all branch instructions,
- * - instructions that explicitly write the PC,
- * - exception generating instructions.
- */
- ARMV7_PERFCTR_PC_WRITE = 0x0C,
- ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D,
- ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F,
- ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10,
- ARMV7_PERFCTR_CLOCK_CYCLES = 0x11,
-
- ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12,
-
- ARMV7_PERFCTR_CPU_CYCLES = 0xFF
-};
-
-/* ARMv7 Cortex-A8 specific event types */
-enum armv7_a8_perf_types {
- ARMV7_PERFCTR_INSTR_EXECUTED = 0x08,
-
- ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E,
-
- ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40,
- ARMV7_PERFCTR_L2_STORE_MERGED = 0x41,
- ARMV7_PERFCTR_L2_STORE_BUFF = 0x42,
- ARMV7_PERFCTR_L2_ACCESS = 0x43,
- ARMV7_PERFCTR_L2_CACH_MISS = 0x44,
- ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45,
- ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46,
- ARMV7_PERFCTR_MEMORY_REPLAY = 0x47,
- ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48,
- ARMV7_PERFCTR_L1_DATA_MISS = 0x49,
- ARMV7_PERFCTR_L1_INST_MISS = 0x4A,
- ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B,
- ARMV7_PERFCTR_L1_NEON_DATA = 0x4C,
- ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D,
- ARMV7_PERFCTR_L2_NEON = 0x4E,
- ARMV7_PERFCTR_L2_NEON_HIT = 0x4F,
- ARMV7_PERFCTR_L1_INST = 0x50,
- ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51,
- ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52,
- ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53,
- ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54,
- ARMV7_PERFCTR_OP_EXECUTED = 0x55,
- ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56,
- ARMV7_PERFCTR_CYCLES_INST = 0x57,
- ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58,
- ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59,
- ARMV7_PERFCTR_NEON_CYCLES = 0x5A,
-
- ARMV7_PERFCTR_PMU0_EVENTS = 0x70,
- ARMV7_PERFCTR_PMU1_EVENTS = 0x71,
- ARMV7_PERFCTR_PMU_EVENTS = 0x72,
-};
-
-/* ARMv7 Cortex-A9 specific event types */
-enum armv7_a9_perf_types {
- ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40,
- ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41,
- ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42,
-
- ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50,
- ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51,
-
- ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60,
- ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61,
- ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62,
- ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63,
- ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64,
- ARMV7_PERFCTR_DATA_EVICTION = 0x65,
- ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66,
- ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67,
- ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68,
-
- ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E,
-
- ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70,
- ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71,
- ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72,
- ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73,
- ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74,
-
- ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80,
- ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81,
- ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82,
- ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83,
- ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84,
- ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85,
- ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86,
-
- ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A,
- ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B,
-
- ARMV7_PERFCTR_ISB_INST = 0x90,
- ARMV7_PERFCTR_DSB_INST = 0x91,
- ARMV7_PERFCTR_DMB_INST = 0x92,
- ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93,
-
- ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0,
- ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1,
- ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2,
- ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3,
- ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4,
- ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5
-};
-
-/*
- * Cortex-A8 HW events mapping
- *
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
-};
-
-static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
- [C(L1D)] = {
- /*
- * The performance counters don't differentiate between read
- * and write accesses/misses so this isn't strictly correct,
- * but it's the best we can do. Writes and reads get
- * combined.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(L1I)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(LL)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(DTLB)] = {
- /*
- * Only ITLB misses and DTLB refills are supported.
- * If users want the DTLB refills misses a raw counter
- * must be used.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(ITLB)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(BPU)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
-};
-
-/*
- * Cortex-A9 HW events mapping
- */
-static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] =
- ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
- [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT,
- [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
-};
-
-static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
- [C(L1D)] = {
- /*
- * The performance counters don't differentiate between read
- * and write accesses/misses so this isn't strictly correct,
- * but it's the best we can do. Writes and reads get
- * combined.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(L1I)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(LL)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(DTLB)] = {
- /*
- * Only ITLB misses and DTLB refills are supported.
- * If users want the DTLB refills misses a raw counter
- * must be used.
- */
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(ITLB)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(BPU)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
-};
-
-/*
- * Perf Events counters
- */
-enum armv7_counters {
- ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */
- ARMV7_COUNTER0 = 2, /* First event counter */
-};
-
-/*
- * The cycle counter is ARMV7_CYCLE_COUNTER.
- * The first event counter is ARMV7_COUNTER0.
- * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
- */
-#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1)
-
-/*
- * ARMv7 low level PMNC access
- */
-
-/*
- * Per-CPU PMNC: config reg
- */
-#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */
-#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */
-#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */
-#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */
-#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */
-#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/
-#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */
-#define ARMV7_PMNC_N_MASK 0x1f
-#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */
-
-/*
- * Available counters
- */
-#define ARMV7_CNT0 0 /* First event counter */
-#define ARMV7_CCNT 31 /* Cycle counter */
-
-/* Perf Event to low level counters mapping */
-#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0)
-
-/*
- * CNTENS: counters enable reg
- */
-#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENS_C (1 << ARMV7_CCNT)
-
-/*
- * CNTENC: counters disable reg
- */
-#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENC_C (1 << ARMV7_CCNT)
-
-/*
- * INTENS: counters overflow interrupt enable reg
- */
-#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENS_C (1 << ARMV7_CCNT)
-
-/*
- * INTENC: counters overflow interrupt disable reg
- */
-#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENC_C (1 << ARMV7_CCNT)
-
-/*
- * EVTSEL: Event selection reg
- */
-#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */
-
-/*
- * SELECT: Counter selection reg
- */
-#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */
-
-/*
- * FLAG: counters overflow flag status reg
- */
-#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_FLAG_C (1 << ARMV7_CCNT)
-#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */
-#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK
-
-static inline unsigned long armv7_pmnc_read(void)
-{
- u32 val;
- asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
- return val;
-}
-
-static inline void armv7_pmnc_write(unsigned long val)
-{
- val &= ARMV7_PMNC_MASK;
- asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
-}
-
-static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
-{
- return pmnc & ARMV7_OVERFLOWED_MASK;
-}
-
-static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
- enum armv7_counters counter)
-{
- int ret = 0;
-
- if (counter == ARMV7_CYCLE_COUNTER)
- ret = pmnc & ARMV7_FLAG_C;
- else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
- ret = pmnc & ARMV7_FLAG_P(counter);
- else
- pr_err("CPU%u checking wrong counter %d overflow status\n",
- smp_processor_id(), counter);
-
- return ret;
-}
-
-static inline int armv7_pmnc_select_counter(unsigned int idx)
-{
- u32 val;
-
- if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
- pr_err("CPU%u selecting wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
- }
-
- val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
- asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
-
- return idx;
-}
-
-static inline u32 armv7pmu_read_counter(int idx)
-{
- unsigned long value = 0;
-
- if (idx == ARMV7_CYCLE_COUNTER)
- asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
- else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
- if (armv7_pmnc_select_counter(idx) == idx)
- asm volatile("mrc p15, 0, %0, c9, c13, 2"
- : "=r" (value));
- } else
- pr_err("CPU%u reading wrong counter %d\n",
- smp_processor_id(), idx);
-
- return value;
-}
-
-static inline void armv7pmu_write_counter(int idx, u32 value)
-{
- if (idx == ARMV7_CYCLE_COUNTER)
- asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
- else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
- if (armv7_pmnc_select_counter(idx) == idx)
- asm volatile("mcr p15, 0, %0, c9, c13, 2"
- : : "r" (value));
- } else
- pr_err("CPU%u writing wrong counter %d\n",
- smp_processor_id(), idx);
-}
-
-static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
-{
- if (armv7_pmnc_select_counter(idx) == idx) {
- val &= ARMV7_EVTSEL_MASK;
- asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
- }
-}
-
-static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
-{
- u32 val;
-
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u enabling wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
- }
-
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_CNTENS_C;
- else
- val = ARMV7_CNTENS_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
-
- return idx;
-}
-
-static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
-{
- u32 val;
-
-
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u disabling wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
- }
-
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_CNTENC_C;
- else
- val = ARMV7_CNTENC_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
-
- return idx;
-}
-
-static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
-{
- u32 val;
-
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u enabling wrong PMNC counter"
- " interrupt enable %d\n", smp_processor_id(), idx);
- return -1;
- }
-
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_INTENS_C;
- else
- val = ARMV7_INTENS_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
-
- return idx;
-}
-
-static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
-{
- u32 val;
-
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u disabling wrong PMNC counter"
- " interrupt enable %d\n", smp_processor_id(), idx);
- return -1;
- }
-
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_INTENC_C;
- else
- val = ARMV7_INTENC_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
-
- return idx;
-}
-
-static inline u32 armv7_pmnc_getreset_flags(void)
-{
- u32 val;
-
- /* Read */
- asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-
- /* Write to clear flags */
- val &= ARMV7_FLAG_MASK;
- asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
-
- return val;
-}
-
-#ifdef DEBUG
-static void armv7_pmnc_dump_regs(void)
-{
- u32 val;
- unsigned int cnt;
-
- printk(KERN_INFO "PMNC registers dump:\n");
-
- asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
- printk(KERN_INFO "PMNC =0x%08x\n", val);
-
- asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
- printk(KERN_INFO "CNTENS=0x%08x\n", val);
-
- asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
- printk(KERN_INFO "INTENS=0x%08x\n", val);
-
- asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
- printk(KERN_INFO "FLAGS =0x%08x\n", val);
-
- asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
- printk(KERN_INFO "SELECT=0x%08x\n", val);
-
- asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
- printk(KERN_INFO "CCNT =0x%08x\n", val);
-
- for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
- armv7_pmnc_select_counter(cnt);
- asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
- printk(KERN_INFO "CNT[%d] count =0x%08x\n",
- cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
- asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
- printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
- cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
- }
-}
-#endif
-
-void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
- unsigned long flags;
-
- /*
- * Enable counter and interrupt, and set the counter to count
- * the event that we're interested in.
- */
- spin_lock_irqsave(&pmu_lock, flags);
-
- /*
- * Disable counter
- */
- armv7_pmnc_disable_counter(idx);
-
- /*
- * Set event (if destined for PMNx counters)
- * We don't need to set the event if it's a cycle count
- */
- if (idx != ARMV7_CYCLE_COUNTER)
- armv7_pmnc_write_evtsel(idx, hwc->config_base);
-
- /*
- * Enable interrupt for this counter
- */
- armv7_pmnc_enable_intens(idx);
-
- /*
- * Enable counter
- */
- armv7_pmnc_enable_counter(idx);
-
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
- unsigned long flags;
-
- /*
- * Disable counter and interrupt
- */
- spin_lock_irqsave(&pmu_lock, flags);
-
- /*
- * Disable counter
- */
- armv7_pmnc_disable_counter(idx);
-
- /*
- * Disable interrupt for this counter
- */
- armv7_pmnc_disable_intens(idx);
-
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
-{
- unsigned long pmnc;
- struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
- struct pt_regs *regs;
- int idx;
-
- /*
- * Get and reset the IRQ flags
- */
- pmnc = armv7_pmnc_getreset_flags();
-
- /*
- * Did an overflow occur?
- */
- if (!armv7_pmnc_has_overflowed(pmnc))
- return IRQ_NONE;
-
- /*
- * Handle the counter(s) overflow(s)
- */
- regs = get_irq_regs();
-
- perf_sample_data_init(&data, 0);
-
- cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
- struct perf_event *event = cpuc->events[idx];
- struct hw_perf_event *hwc;
-
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
- /*
- * We have a single interrupt for all counters. Check that
- * each counter has overflowed before we process it.
- */
- if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
- continue;
-
- hwc = &event->hw;
- armpmu_event_update(event, hwc, idx);
- data.period = event->hw.last_period;
- if (!armpmu_event_set_period(event, hwc, idx))
- continue;
-
- if (perf_event_overflow(event, 0, &data, regs))
- armpmu->disable(hwc, idx);
- }
-
- /*
- * Handle the pending perf events.
- *
- * Note: this call *must* be run with interrupts disabled. For
- * platforms that can have the PMU interrupts raised as an NMI, this
- * will not work.
- */
- irq_work_run();
-
- return IRQ_HANDLED;
-}
-
-static void armv7pmu_start(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&pmu_lock, flags);
- /* Enable all counters */
- armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void armv7pmu_stop(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&pmu_lock, flags);
- /* Disable all counters */
- armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline int armv7_a8_pmu_event_map(int config)
-{
- int mapping = armv7_a8_perf_map[config];
- if (HW_OP_UNSUPPORTED == mapping)
- mapping = -EOPNOTSUPP;
- return mapping;
-}
-
-static inline int armv7_a9_pmu_event_map(int config)
-{
- int mapping = armv7_a9_perf_map[config];
- if (HW_OP_UNSUPPORTED == mapping)
- mapping = -EOPNOTSUPP;
- return mapping;
-}
-
-static u64 armv7pmu_raw_event(u64 config)
-{
- return config & 0xff;
-}
-
-static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
- struct hw_perf_event *event)
-{
- int idx;
-
- /* Always place a cycle counter into the cycle counter. */
- if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
- if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
- return -EAGAIN;
-
- return ARMV7_CYCLE_COUNTER;
- } else {
- /*
- * For anything other than a cycle counter, try and use
- * the events counters
- */
- for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
- if (!test_and_set_bit(idx, cpuc->used_mask))
- return idx;
- }
-
- /* The counters are all in use. */
- return -EAGAIN;
- }
-}
-
-static struct arm_pmu armv7pmu = {
- .handle_irq = armv7pmu_handle_irq,
- .enable = armv7pmu_enable_event,
- .disable = armv7pmu_disable_event,
- .raw_event = armv7pmu_raw_event,
- .read_counter = armv7pmu_read_counter,
- .write_counter = armv7pmu_write_counter,
- .get_event_idx = armv7pmu_get_event_idx,
- .start = armv7pmu_start,
- .stop = armv7pmu_stop,
- .max_period = (1LLU << 32) - 1,
-};
-
-static u32 __init armv7_reset_read_pmnc(void)
-{
- u32 nb_cnt;
-
- /* Initialize & Reset PMNC: C and P bits */
- armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
-
- /* Read the nb of CNTx counters supported from PMNC */
- nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
-
- /* Add the CPU cycles counter and return */
- return nb_cnt + 1;
-}
-
-/*
- * ARMv5 [xscale] Performance counter handling code.
- *
- * Based on xscale OProfile code.
- *
- * There are two variants of the xscale PMU that we support:
- * - xscale1pmu: 2 event counters and a cycle counter
- * - xscale2pmu: 4 event counters and a cycle counter
- * The two variants share event definitions, but have different
- * PMU structures.
- */
-
-enum xscale_perf_types {
- XSCALE_PERFCTR_ICACHE_MISS = 0x00,
- XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01,
- XSCALE_PERFCTR_DATA_STALL = 0x02,
- XSCALE_PERFCTR_ITLB_MISS = 0x03,
- XSCALE_PERFCTR_DTLB_MISS = 0x04,
- XSCALE_PERFCTR_BRANCH = 0x05,
- XSCALE_PERFCTR_BRANCH_MISS = 0x06,
- XSCALE_PERFCTR_INSTRUCTION = 0x07,
- XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08,
- XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09,
- XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A,
- XSCALE_PERFCTR_DCACHE_MISS = 0x0B,
- XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C,
- XSCALE_PERFCTR_PC_CHANGED = 0x0D,
- XSCALE_PERFCTR_BCU_REQUEST = 0x10,
- XSCALE_PERFCTR_BCU_FULL = 0x11,
- XSCALE_PERFCTR_BCU_DRAIN = 0x12,
- XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14,
- XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15,
- XSCALE_PERFCTR_RMW = 0x16,
- /* XSCALE_PERFCTR_CCNT is not hardware defined */
- XSCALE_PERFCTR_CCNT = 0xFE,
- XSCALE_PERFCTR_UNUSED = 0xFF,
-};
-
-enum xscale_counters {
- XSCALE_CYCLE_COUNTER = 1,
- XSCALE_COUNTER0,
- XSCALE_COUNTER1,
- XSCALE_COUNTER2,
- XSCALE_COUNTER3,
-};
-
-static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT,
- [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
- [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
- [C(L1D)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(L1I)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(LL)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(DTLB)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(ITLB)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
- [C(BPU)] = {
- [C(OP_READ)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- [C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
- },
- },
-};
-
-#define XSCALE_PMU_ENABLE 0x001
-#define XSCALE_PMN_RESET 0x002
-#define XSCALE_CCNT_RESET 0x004
-#define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET)
-#define XSCALE_PMU_CNT64 0x008
-
-static inline int
-xscalepmu_event_map(int config)
-{
- int mapping = xscale_perf_map[config];
- if (HW_OP_UNSUPPORTED == mapping)
- mapping = -EOPNOTSUPP;
- return mapping;
-}
-
-static u64
-xscalepmu_raw_event(u64 config)
-{
- return config & 0xff;
-}
-
-#define XSCALE1_OVERFLOWED_MASK 0x700
-#define XSCALE1_CCOUNT_OVERFLOW 0x400
-#define XSCALE1_COUNT0_OVERFLOW 0x100
-#define XSCALE1_COUNT1_OVERFLOW 0x200
-#define XSCALE1_CCOUNT_INT_EN 0x040
-#define XSCALE1_COUNT0_INT_EN 0x010
-#define XSCALE1_COUNT1_INT_EN 0x020
-#define XSCALE1_COUNT0_EVT_SHFT 12
-#define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT)
-#define XSCALE1_COUNT1_EVT_SHFT 20
-#define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT)
-
-static inline u32
-xscale1pmu_read_pmnc(void)
-{
- u32 val;
- asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
- return val;
-}
-
-static inline void
-xscale1pmu_write_pmnc(u32 val)
-{
- /* upper 4bits and 7, 11 are write-as-0 */
- val &= 0xffff77f;
- asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static inline int
-xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
- enum xscale_counters counter)
-{
- int ret = 0;
-
- switch (counter) {
- case XSCALE_CYCLE_COUNTER:
- ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
- break;
- case XSCALE_COUNTER0:
- ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
- break;
- case XSCALE_COUNTER1:
- ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
- break;
- default:
- WARN_ONCE(1, "invalid counter number (%d)\n", counter);
- }
-
- return ret;
-}
-
-static irqreturn_t
-xscale1pmu_handle_irq(int irq_num, void *dev)
-{
- unsigned long pmnc;
- struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
- struct pt_regs *regs;
- int idx;
-
- /*
- * NOTE: there's an A stepping erratum that states if an overflow
- * bit already exists and another occurs, the previous
- * Overflow bit gets cleared. There's no workaround.
- * Fixed in B stepping or later.
- */
- pmnc = xscale1pmu_read_pmnc();
-
- /*
- * Write the value back to clear the overflow flags. Overflow
- * flags remain in pmnc for use below. We also disable the PMU
- * while we process the interrupt.
- */
- xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
- if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
- return IRQ_NONE;
-
- regs = get_irq_regs();
-
- perf_sample_data_init(&data, 0);
-
- cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
- struct perf_event *event = cpuc->events[idx];
- struct hw_perf_event *hwc;
-
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
- if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
- continue;
-
- hwc = &event->hw;
- armpmu_event_update(event, hwc, idx);
- data.period = event->hw.last_period;
- if (!armpmu_event_set_period(event, hwc, idx))
- continue;
-
- if (perf_event_overflow(event, 0, &data, regs))
- armpmu->disable(hwc, idx);
- }
-
- irq_work_run();
-
- /*
- * Re-enable the PMU.
- */
- pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
- xscale1pmu_write_pmnc(pmnc);
-
- return IRQ_HANDLED;
-}
-
-static void
-xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
- unsigned long val, mask, evt, flags;
-
- switch (idx) {
- case XSCALE_CYCLE_COUNTER:
- mask = 0;
- evt = XSCALE1_CCOUNT_INT_EN;
- break;
- case XSCALE_COUNTER0:
- mask = XSCALE1_COUNT0_EVT_MASK;
- evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
- XSCALE1_COUNT0_INT_EN;
- break;
- case XSCALE_COUNTER1:
- mask = XSCALE1_COUNT1_EVT_MASK;
- evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
- XSCALE1_COUNT1_INT_EN;
- break;
- default:
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = xscale1pmu_read_pmnc();
- val &= ~mask;
- val |= evt;
- xscale1pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
- unsigned long val, mask, evt, flags;
-
- switch (idx) {
- case XSCALE_CYCLE_COUNTER:
- mask = XSCALE1_CCOUNT_INT_EN;
- evt = 0;
- break;
- case XSCALE_COUNTER0:
- mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
- evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
- break;
- case XSCALE_COUNTER1:
- mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
- evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
- break;
- default:
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = xscale1pmu_read_pmnc();
- val &= ~mask;
- val |= evt;
- xscale1pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static int
-xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
- struct hw_perf_event *event)
-{
- if (XSCALE_PERFCTR_CCNT == event->config_base) {
- if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
- return -EAGAIN;
-
- return XSCALE_CYCLE_COUNTER;
- } else {
- if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) {
- return XSCALE_COUNTER1;
- }
-
- if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) {
- return XSCALE_COUNTER0;
- }
-
- return -EAGAIN;
- }
-}
-
-static void
-xscale1pmu_start(void)
-{
- unsigned long flags, val;
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = xscale1pmu_read_pmnc();
- val |= XSCALE_PMU_ENABLE;
- xscale1pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale1pmu_stop(void)
-{
- unsigned long flags, val;
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = xscale1pmu_read_pmnc();
- val &= ~XSCALE_PMU_ENABLE;
- xscale1pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline u32
-xscale1pmu_read_counter(int counter)
-{
- u32 val = 0;
-
- switch (counter) {
- case XSCALE_CYCLE_COUNTER:
- asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
- break;
- case XSCALE_COUNTER0:
- asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
- break;
- case XSCALE_COUNTER1:
- asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
- break;
- }
-
- return val;
-}
-
-static inline void
-xscale1pmu_write_counter(int counter, u32 val)
-{
- switch (counter) {
- case XSCALE_CYCLE_COUNTER:
- asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
- break;
- case XSCALE_COUNTER0:
- asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
- break;
- case XSCALE_COUNTER1:
- asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
- break;
- }
-}
-
-static const struct arm_pmu xscale1pmu = {
- .id = ARM_PERF_PMU_ID_XSCALE1,
- .handle_irq = xscale1pmu_handle_irq,
- .enable = xscale1pmu_enable_event,
- .disable = xscale1pmu_disable_event,
- .event_map = xscalepmu_event_map,
- .raw_event = xscalepmu_raw_event,
- .read_counter = xscale1pmu_read_counter,
- .write_counter = xscale1pmu_write_counter,
- .get_event_idx = xscale1pmu_get_event_idx,
- .start = xscale1pmu_start,
- .stop = xscale1pmu_stop,
- .num_events = 3,
- .max_period = (1LLU << 32) - 1,
-};
-
-#define XSCALE2_OVERFLOWED_MASK 0x01f
-#define XSCALE2_CCOUNT_OVERFLOW 0x001
-#define XSCALE2_COUNT0_OVERFLOW 0x002
-#define XSCALE2_COUNT1_OVERFLOW 0x004
-#define XSCALE2_COUNT2_OVERFLOW 0x008
-#define XSCALE2_COUNT3_OVERFLOW 0x010
-#define XSCALE2_CCOUNT_INT_EN 0x001
-#define XSCALE2_COUNT0_INT_EN 0x002
-#define XSCALE2_COUNT1_INT_EN 0x004
-#define XSCALE2_COUNT2_INT_EN 0x008
-#define XSCALE2_COUNT3_INT_EN 0x010
-#define XSCALE2_COUNT0_EVT_SHFT 0
-#define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT)
-#define XSCALE2_COUNT1_EVT_SHFT 8
-#define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT)
-#define XSCALE2_COUNT2_EVT_SHFT 16
-#define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT)
-#define XSCALE2_COUNT3_EVT_SHFT 24
-#define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT)
-
-static inline u32
-xscale2pmu_read_pmnc(void)
-{
- u32 val;
- asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
- /* bits 1-2 and 4-23 are read-unpredictable */
- return val & 0xff000009;
-}
-
-static inline void
-xscale2pmu_write_pmnc(u32 val)
-{
- /* bits 4-23 are write-as-0, 24-31 are write ignored */
- val &= 0xf;
- asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_overflow_flags(void)
-{
- u32 val;
- asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
- return val;
-}
-
-static inline void
-xscale2pmu_write_overflow_flags(u32 val)
-{
- asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_event_select(void)
-{
- u32 val;
- asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
- return val;
-}
-
-static inline void
-xscale2pmu_write_event_select(u32 val)
-{
- asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
-}
-
-static inline u32
-xscale2pmu_read_int_enable(void)
-{
- u32 val;
- asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
- return val;
-}
-
-static void
-xscale2pmu_write_int_enable(u32 val)
-{
- asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline int
-xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
- enum xscale_counters counter)
-{
- int ret = 0;
-
- switch (counter) {
- case XSCALE_CYCLE_COUNTER:
- ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
- break;
- case XSCALE_COUNTER0:
- ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
- break;
- case XSCALE_COUNTER1:
- ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
- break;
- case XSCALE_COUNTER2:
- ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
- break;
- case XSCALE_COUNTER3:
- ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
- break;
- default:
- WARN_ONCE(1, "invalid counter number (%d)\n", counter);
- }
-
- return ret;
-}
-
-static irqreturn_t
-xscale2pmu_handle_irq(int irq_num, void *dev)
-{
- unsigned long pmnc, of_flags;
- struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
- struct pt_regs *regs;
- int idx;
-
- /* Disable the PMU. */
- pmnc = xscale2pmu_read_pmnc();
- xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
- /* Check the overflow flag register. */
- of_flags = xscale2pmu_read_overflow_flags();
- if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
- return IRQ_NONE;
-
- /* Clear the overflow bits. */
- xscale2pmu_write_overflow_flags(of_flags);
-
- regs = get_irq_regs();
-
- perf_sample_data_init(&data, 0);
-
- cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
- struct perf_event *event = cpuc->events[idx];
- struct hw_perf_event *hwc;
-
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
- if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
- continue;
-
- hwc = &event->hw;
- armpmu_event_update(event, hwc, idx);
- data.period = event->hw.last_period;
- if (!armpmu_event_set_period(event, hwc, idx))
- continue;
-
- if (perf_event_overflow(event, 0, &data, regs))
- armpmu->disable(hwc, idx);
- }
-
- irq_work_run();
-
- /*
- * Re-enable the PMU.
- */
- pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
- xscale2pmu_write_pmnc(pmnc);
-
- return IRQ_HANDLED;
-}
-
-static void
-xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
- unsigned long flags, ien, evtsel;
-
- ien = xscale2pmu_read_int_enable();
- evtsel = xscale2pmu_read_event_select();
-
- switch (idx) {
- case XSCALE_CYCLE_COUNTER:
- ien |= XSCALE2_CCOUNT_INT_EN;
- break;
- case XSCALE_COUNTER0:
- ien |= XSCALE2_COUNT0_INT_EN;
- evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
- evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
- break;
- case XSCALE_COUNTER1:
- ien |= XSCALE2_COUNT1_INT_EN;
- evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
- evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
- break;
- case XSCALE_COUNTER2:
- ien |= XSCALE2_COUNT2_INT_EN;
- evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
- evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
- break;
- case XSCALE_COUNTER3:
- ien |= XSCALE2_COUNT3_INT_EN;
- evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
- evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
- break;
- default:
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- spin_lock_irqsave(&pmu_lock, flags);
- xscale2pmu_write_event_select(evtsel);
- xscale2pmu_write_int_enable(ien);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
- unsigned long flags, ien, evtsel;
-
- ien = xscale2pmu_read_int_enable();
- evtsel = xscale2pmu_read_event_select();
-
- switch (idx) {
- case XSCALE_CYCLE_COUNTER:
- ien &= ~XSCALE2_CCOUNT_INT_EN;
- break;
- case XSCALE_COUNTER0:
- ien &= ~XSCALE2_COUNT0_INT_EN;
- evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
- evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
- break;
- case XSCALE_COUNTER1:
- ien &= ~XSCALE2_COUNT1_INT_EN;
- evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
- evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
- break;
- case XSCALE_COUNTER2:
- ien &= ~XSCALE2_COUNT2_INT_EN;
- evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
- evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
- break;
- case XSCALE_COUNTER3:
- ien &= ~XSCALE2_COUNT3_INT_EN;
- evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
- evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
- break;
- default:
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return;
- }
-
- spin_lock_irqsave(&pmu_lock, flags);
- xscale2pmu_write_event_select(evtsel);
- xscale2pmu_write_int_enable(ien);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static int
-xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
- struct hw_perf_event *event)
-{
- int idx = xscale1pmu_get_event_idx(cpuc, event);
- if (idx >= 0)
- goto out;
-
- if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
- idx = XSCALE_COUNTER3;
- else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
- idx = XSCALE_COUNTER2;
-out:
- return idx;
-}
-
-static void
-xscale2pmu_start(void)
-{
- unsigned long flags, val;
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
- val |= XSCALE_PMU_ENABLE;
- xscale2pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale2pmu_stop(void)
-{
- unsigned long flags, val;
-
- spin_lock_irqsave(&pmu_lock, flags);
- val = xscale2pmu_read_pmnc();
- val &= ~XSCALE_PMU_ENABLE;
- xscale2pmu_write_pmnc(val);
- spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline u32
-xscale2pmu_read_counter(int counter)
-{
- u32 val = 0;
-
- switch (counter) {
- case XSCALE_CYCLE_COUNTER:
- asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
- break;
- case XSCALE_COUNTER0:
- asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
- break;
- case XSCALE_COUNTER1:
- asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
- break;
- case XSCALE_COUNTER2:
- asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
- break;
- case XSCALE_COUNTER3:
- asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
- break;
- }
-
- return val;
-}
-
-static inline void
-xscale2pmu_write_counter(int counter, u32 val)
-{
- switch (counter) {
- case XSCALE_CYCLE_COUNTER:
- asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
- break;
- case XSCALE_COUNTER0:
- asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
- break;
- case XSCALE_COUNTER1:
- asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
- break;
- case XSCALE_COUNTER2:
- asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
- break;
- case XSCALE_COUNTER3:
- asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
- break;
- }
-}
-
-static const struct arm_pmu xscale2pmu = {
- .id = ARM_PERF_PMU_ID_XSCALE2,
- .handle_irq = xscale2pmu_handle_irq,
- .enable = xscale2pmu_enable_event,
- .disable = xscale2pmu_disable_event,
- .event_map = xscalepmu_event_map,
- .raw_event = xscalepmu_raw_event,
- .read_counter = xscale2pmu_read_counter,
- .write_counter = xscale2pmu_write_counter,
- .get_event_idx = xscale2pmu_get_event_idx,
- .start = xscale2pmu_start,
- .stop = xscale2pmu_stop,
- .num_events = 5,
- .max_period = (1LLU << 32) - 1,
-};
+/* Include the PMU-specific implementations. */
+#include "perf_event_xscale.c"
+#include "perf_event_v6.c"
+#include "perf_event_v7.c"
static int __init
init_hw_perf_events(void)
@@ -2977,37 +622,16 @@
case 0xB360: /* ARM1136 */
case 0xB560: /* ARM1156 */
case 0xB760: /* ARM1176 */
- armpmu = &armv6pmu;
- memcpy(armpmu_perf_cache_map, armv6_perf_cache_map,
- sizeof(armv6_perf_cache_map));
+ armpmu = armv6pmu_init();
break;
case 0xB020: /* ARM11mpcore */
- armpmu = &armv6mpcore_pmu;
- memcpy(armpmu_perf_cache_map,
- armv6mpcore_perf_cache_map,
- sizeof(armv6mpcore_perf_cache_map));
+ armpmu = armv6mpcore_pmu_init();
break;
case 0xC080: /* Cortex-A8 */
- armv7pmu.id = ARM_PERF_PMU_ID_CA8;
- memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map,
- sizeof(armv7_a8_perf_cache_map));
- armv7pmu.event_map = armv7_a8_pmu_event_map;
- armpmu = &armv7pmu;
-
- /* Reset PMNC and read the nb of CNTx counters
- supported */
- armv7pmu.num_events = armv7_reset_read_pmnc();
+ armpmu = armv7_a8_pmu_init();
break;
case 0xC090: /* Cortex-A9 */
- armv7pmu.id = ARM_PERF_PMU_ID_CA9;
- memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map,
- sizeof(armv7_a9_perf_cache_map));
- armv7pmu.event_map = armv7_a9_pmu_event_map;
- armpmu = &armv7pmu;
-
- /* Reset PMNC and read the nb of CNTx counters
- supported */
- armv7pmu.num_events = armv7_reset_read_pmnc();
+ armpmu = armv7_a9_pmu_init();
break;
}
/* Intel CPUs [xscale]. */
@@ -3015,21 +639,17 @@
part_number = (cpuid >> 13) & 0x7;
switch (part_number) {
case 1:
- armpmu = &xscale1pmu;
- memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
- sizeof(xscale_perf_cache_map));
+ armpmu = xscale1pmu_init();
break;
case 2:
- armpmu = &xscale2pmu;
- memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
- sizeof(xscale_perf_cache_map));
+ armpmu = xscale2pmu_init();
break;
}
}
if (armpmu) {
pr_info("enabled with %s PMU driver, %d counters available\n",
- arm_pmu_names[armpmu->id], armpmu->num_events);
+ armpmu->name, armpmu->num_events);
} else {
pr_info("no hardware support available\n");
}
@@ -3053,17 +673,17 @@
* This code has been adapted from the ARM OProfile support.
*/
struct frame_tail {
- struct frame_tail *fp;
- unsigned long sp;
- unsigned long lr;
+ struct frame_tail __user *fp;
+ unsigned long sp;
+ unsigned long lr;
} __attribute__((packed));
/*
* Get the return address for a single stackframe and return a pointer to the
* next frame tail.
*/
-static struct frame_tail *
-user_backtrace(struct frame_tail *tail,
+static struct frame_tail __user *
+user_backtrace(struct frame_tail __user *tail,
struct perf_callchain_entry *entry)
{
struct frame_tail buftail;
@@ -3089,10 +709,10 @@
void
perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
{
- struct frame_tail *tail;
+ struct frame_tail __user *tail;
- tail = (struct frame_tail *)regs->ARM_fp - 1;
+ tail = (struct frame_tail __user *)regs->ARM_fp - 1;
while (tail && !((unsigned long)tail & 0x3))
tail = user_backtrace(tail, entry);
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
new file mode 100644
index 0000000..c058bfc
--- /dev/null
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -0,0 +1,672 @@
+/*
+ * ARMv6 Performance counter handling code.
+ *
+ * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
+ *
+ * ARMv6 has 2 configurable performance counters and a single cycle counter.
+ * They all share a single reset bit but can be written to zero so we can use
+ * that for a reset.
+ *
+ * The counters can't be individually enabled or disabled so when we remove
+ * one event and replace it with another we could get spurious counts from the
+ * wrong event. However, we can take advantage of the fact that the
+ * performance counters can export events to the event bus, and the event bus
+ * itself can be monitored. This requires that we *don't* export the events to
+ * the event bus. The procedure for disabling a configurable counter is:
+ * - change the counter to count the ETMEXTOUT[0] signal (0x20). This
+ * effectively stops the counter from counting.
+ * - disable the counter's interrupt generation (each counter has it's
+ * own interrupt enable bit).
+ * Once stopped, the counter value can be written as 0 to reset.
+ *
+ * To enable a counter:
+ * - enable the counter's interrupt generation.
+ * - set the new event type.
+ *
+ * Note: the dedicated cycle counter only counts cycles and can't be
+ * enabled/disabled independently of the others. When we want to disable the
+ * cycle counter, we have to just disable the interrupt reporting and start
+ * ignoring that counter. When re-enabling, we have to reset the value and
+ * enable the interrupt.
+ */
+
+#ifdef CONFIG_CPU_V6
+enum armv6_perf_types {
+ ARMV6_PERFCTR_ICACHE_MISS = 0x0,
+ ARMV6_PERFCTR_IBUF_STALL = 0x1,
+ ARMV6_PERFCTR_DDEP_STALL = 0x2,
+ ARMV6_PERFCTR_ITLB_MISS = 0x3,
+ ARMV6_PERFCTR_DTLB_MISS = 0x4,
+ ARMV6_PERFCTR_BR_EXEC = 0x5,
+ ARMV6_PERFCTR_BR_MISPREDICT = 0x6,
+ ARMV6_PERFCTR_INSTR_EXEC = 0x7,
+ ARMV6_PERFCTR_DCACHE_HIT = 0x9,
+ ARMV6_PERFCTR_DCACHE_ACCESS = 0xA,
+ ARMV6_PERFCTR_DCACHE_MISS = 0xB,
+ ARMV6_PERFCTR_DCACHE_WBACK = 0xC,
+ ARMV6_PERFCTR_SW_PC_CHANGE = 0xD,
+ ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF,
+ ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10,
+ ARMV6_PERFCTR_LSU_FULL_STALL = 0x11,
+ ARMV6_PERFCTR_WBUF_DRAINED = 0x12,
+ ARMV6_PERFCTR_CPU_CYCLES = 0xFF,
+ ARMV6_PERFCTR_NOP = 0x20,
+};
+
+enum armv6_counters {
+ ARMV6_CYCLE_COUNTER = 1,
+ ARMV6_COUNTER0,
+ ARMV6_COUNTER1,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ /*
+ * The performance counters don't differentiate between read
+ * and write accesses/misses so this isn't strictly correct,
+ * but it's the best we can do. Writes and reads get
+ * combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * The ARM performance counters can count micro DTLB misses,
+ * micro ITLB misses and main TLB misses. There isn't an event
+ * for TLB misses, so use the micro misses here and if users
+ * want the main TLB misses they can use a raw counter.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+enum armv6mpcore_perf_types {
+ ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0,
+ ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1,
+ ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2,
+ ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3,
+ ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4,
+ ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5,
+ ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6,
+ ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7,
+ ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8,
+ ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
+ ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB,
+ ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
+ ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD,
+ ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
+ ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF,
+ ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10,
+ ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
+ ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12,
+ ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13,
+ ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
+ [C(RESULT_MISS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
+ [C(RESULT_MISS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * The ARM performance counters can count micro DTLB misses,
+ * micro ITLB misses and main TLB misses. There isn't an event
+ * for TLB misses, so use the micro misses here and if users
+ * want the main TLB misses they can use a raw counter.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+static inline unsigned long
+armv6_pmcr_read(void)
+{
+ u32 val;
+ asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val));
+ return val;
+}
+
+static inline void
+armv6_pmcr_write(unsigned long val)
+{
+ asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val));
+}
+
+#define ARMV6_PMCR_ENABLE (1 << 0)
+#define ARMV6_PMCR_CTR01_RESET (1 << 1)
+#define ARMV6_PMCR_CCOUNT_RESET (1 << 2)
+#define ARMV6_PMCR_CCOUNT_DIV (1 << 3)
+#define ARMV6_PMCR_COUNT0_IEN (1 << 4)
+#define ARMV6_PMCR_COUNT1_IEN (1 << 5)
+#define ARMV6_PMCR_CCOUNT_IEN (1 << 6)
+#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8)
+#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9)
+#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10)
+#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20
+#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
+#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12
+#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
+
+#define ARMV6_PMCR_OVERFLOWED_MASK \
+ (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
+ ARMV6_PMCR_CCOUNT_OVERFLOW)
+
+static inline int
+armv6_pmcr_has_overflowed(unsigned long pmcr)
+{
+ return pmcr & ARMV6_PMCR_OVERFLOWED_MASK;
+}
+
+static inline int
+armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
+ enum armv6_counters counter)
+{
+ int ret = 0;
+
+ if (ARMV6_CYCLE_COUNTER == counter)
+ ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
+ else if (ARMV6_COUNTER0 == counter)
+ ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
+ else if (ARMV6_COUNTER1 == counter)
+ ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+ return ret;
+}
+
+static inline u32
+armv6pmu_read_counter(int counter)
+{
+ unsigned long value = 0;
+
+ if (ARMV6_CYCLE_COUNTER == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value));
+ else if (ARMV6_COUNTER0 == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value));
+ else if (ARMV6_COUNTER1 == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value));
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+ return value;
+}
+
+static inline void
+armv6pmu_write_counter(int counter,
+ u32 value)
+{
+ if (ARMV6_CYCLE_COUNTER == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value));
+ else if (ARMV6_COUNTER0 == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value));
+ else if (ARMV6_COUNTER1 == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value));
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+}
+
+static void
+armv6pmu_enable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = 0;
+ evt = ARMV6_PMCR_CCOUNT_IEN;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_EVT_COUNT0_MASK;
+ evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
+ ARMV6_PMCR_COUNT0_IEN;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_EVT_COUNT1_MASK;
+ evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
+ ARMV6_PMCR_COUNT1_IEN;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Mask out the current event and set the counter to count the event
+ * that we're interested in.
+ */
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t
+armv6pmu_handle_irq(int irq_num,
+ void *dev)
+{
+ unsigned long pmcr = armv6_pmcr_read();
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ if (!armv6_pmcr_has_overflowed(pmcr))
+ return IRQ_NONE;
+
+ regs = get_irq_regs();
+
+ /*
+ * The interrupts are cleared by writing the overflow flags back to
+ * the control register. All of the other bits don't have any effect
+ * if they are rewritten, so write the whole value back.
+ */
+ armv6_pmcr_write(pmcr);
+
+ perf_sample_data_init(&data, 0);
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ /*
+ * We have a single interrupt for all counters. Check that
+ * each counter has overflowed before we process it.
+ */
+ if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
+ continue;
+
+ hwc = &event->hw;
+ armpmu_event_update(event, hwc, idx);
+ data.period = event->hw.last_period;
+ if (!armpmu_event_set_period(event, hwc, idx))
+ continue;
+
+ if (perf_event_overflow(event, 0, &data, regs))
+ armpmu->disable(hwc, idx);
+ }
+
+ /*
+ * Handle the pending perf events.
+ *
+ * Note: this call *must* be run with interrupts disabled. For
+ * platforms that can have the PMU interrupts raised as an NMI, this
+ * will not work.
+ */
+ irq_work_run();
+
+ return IRQ_HANDLED;
+}
+
+static void
+armv6pmu_start(void)
+{
+ unsigned long flags, val;
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val |= ARMV6_PMCR_ENABLE;
+ armv6_pmcr_write(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+armv6pmu_stop(void)
+{
+ unsigned long flags, val;
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~ARMV6_PMCR_ENABLE;
+ armv6_pmcr_write(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *event)
+{
+ /* Always place a cycle counter into the cycle counter. */
+ if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
+ if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
+ return -EAGAIN;
+
+ return ARMV6_CYCLE_COUNTER;
+ } else {
+ /*
+ * For anything other than a cycle counter, try and use
+ * counter0 and counter1.
+ */
+ if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask))
+ return ARMV6_COUNTER1;
+
+ if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask))
+ return ARMV6_COUNTER0;
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+ }
+}
+
+static void
+armv6pmu_disable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ evt = 0;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
+ evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
+ evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Mask out the current event and set the counter to count the number
+ * of ETM bus signal assertion cycles. The external reporting should
+ * be disabled and so this should never increment.
+ */
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, flags, evt = 0;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_COUNT0_IEN;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_COUNT1_IEN;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Unlike UP ARMv6, we don't have a way of stopping the counters. We
+ * simply disable the interrupt reporting.
+ */
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static const struct arm_pmu armv6pmu = {
+ .id = ARM_PERF_PMU_ID_V6,
+ .name = "v6",
+ .handle_irq = armv6pmu_handle_irq,
+ .enable = armv6pmu_enable_event,
+ .disable = armv6pmu_disable_event,
+ .read_counter = armv6pmu_read_counter,
+ .write_counter = armv6pmu_write_counter,
+ .get_event_idx = armv6pmu_get_event_idx,
+ .start = armv6pmu_start,
+ .stop = armv6pmu_stop,
+ .cache_map = &armv6_perf_cache_map,
+ .event_map = &armv6_perf_map,
+ .raw_event_mask = 0xFF,
+ .num_events = 3,
+ .max_period = (1LLU << 32) - 1,
+};
+
+static const struct arm_pmu *__init armv6pmu_init(void)
+{
+ return &armv6pmu;
+}
+
+/*
+ * ARMv6mpcore is almost identical to single core ARMv6 with the exception
+ * that some of the events have different enumerations and that there is no
+ * *hack* to stop the programmable counters. To stop the counters we simply
+ * disable the interrupt reporting and update the event. When unthrottling we
+ * reset the period and enable the interrupt reporting.
+ */
+static const struct arm_pmu armv6mpcore_pmu = {
+ .id = ARM_PERF_PMU_ID_V6MP,
+ .name = "v6mpcore",
+ .handle_irq = armv6pmu_handle_irq,
+ .enable = armv6pmu_enable_event,
+ .disable = armv6mpcore_pmu_disable_event,
+ .read_counter = armv6pmu_read_counter,
+ .write_counter = armv6pmu_write_counter,
+ .get_event_idx = armv6pmu_get_event_idx,
+ .start = armv6pmu_start,
+ .stop = armv6pmu_stop,
+ .cache_map = &armv6mpcore_perf_cache_map,
+ .event_map = &armv6mpcore_perf_map,
+ .raw_event_mask = 0xFF,
+ .num_events = 3,
+ .max_period = (1LLU << 32) - 1,
+};
+
+static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+{
+ return &armv6mpcore_pmu;
+}
+#else
+static const struct arm_pmu *__init armv6pmu_init(void)
+{
+ return NULL;
+}
+
+static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_CPU_V6 */
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
new file mode 100644
index 0000000..2e14025
--- /dev/null
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -0,0 +1,906 @@
+/*
+ * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
+ *
+ * ARMv7 support: Jean Pihet <jpihet@mvista.com>
+ * 2010 (c) MontaVista Software, LLC.
+ *
+ * Copied from ARMv6 code, with the low level code inspired
+ * by the ARMv7 Oprofile code.
+ *
+ * Cortex-A8 has up to 4 configurable performance counters and
+ * a single cycle counter.
+ * Cortex-A9 has up to 31 configurable performance counters and
+ * a single cycle counter.
+ *
+ * All counters can be enabled/disabled and IRQ masked separately. The cycle
+ * counter and all 4 performance counters together can be reset separately.
+ */
+
+#ifdef CONFIG_CPU_V7
+/* Common ARMv7 event types */
+enum armv7_perf_types {
+ ARMV7_PERFCTR_PMNC_SW_INCR = 0x00,
+ ARMV7_PERFCTR_IFETCH_MISS = 0x01,
+ ARMV7_PERFCTR_ITLB_MISS = 0x02,
+ ARMV7_PERFCTR_DCACHE_REFILL = 0x03,
+ ARMV7_PERFCTR_DCACHE_ACCESS = 0x04,
+ ARMV7_PERFCTR_DTLB_REFILL = 0x05,
+ ARMV7_PERFCTR_DREAD = 0x06,
+ ARMV7_PERFCTR_DWRITE = 0x07,
+
+ ARMV7_PERFCTR_EXC_TAKEN = 0x09,
+ ARMV7_PERFCTR_EXC_EXECUTED = 0x0A,
+ ARMV7_PERFCTR_CID_WRITE = 0x0B,
+ /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
+ * It counts:
+ * - all branch instructions,
+ * - instructions that explicitly write the PC,
+ * - exception generating instructions.
+ */
+ ARMV7_PERFCTR_PC_WRITE = 0x0C,
+ ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D,
+ ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F,
+ ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10,
+ ARMV7_PERFCTR_CLOCK_CYCLES = 0x11,
+
+ ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12,
+
+ ARMV7_PERFCTR_CPU_CYCLES = 0xFF
+};
+
+/* ARMv7 Cortex-A8 specific event types */
+enum armv7_a8_perf_types {
+ ARMV7_PERFCTR_INSTR_EXECUTED = 0x08,
+
+ ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E,
+
+ ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40,
+ ARMV7_PERFCTR_L2_STORE_MERGED = 0x41,
+ ARMV7_PERFCTR_L2_STORE_BUFF = 0x42,
+ ARMV7_PERFCTR_L2_ACCESS = 0x43,
+ ARMV7_PERFCTR_L2_CACH_MISS = 0x44,
+ ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45,
+ ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46,
+ ARMV7_PERFCTR_MEMORY_REPLAY = 0x47,
+ ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48,
+ ARMV7_PERFCTR_L1_DATA_MISS = 0x49,
+ ARMV7_PERFCTR_L1_INST_MISS = 0x4A,
+ ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B,
+ ARMV7_PERFCTR_L1_NEON_DATA = 0x4C,
+ ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D,
+ ARMV7_PERFCTR_L2_NEON = 0x4E,
+ ARMV7_PERFCTR_L2_NEON_HIT = 0x4F,
+ ARMV7_PERFCTR_L1_INST = 0x50,
+ ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51,
+ ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52,
+ ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53,
+ ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54,
+ ARMV7_PERFCTR_OP_EXECUTED = 0x55,
+ ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56,
+ ARMV7_PERFCTR_CYCLES_INST = 0x57,
+ ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58,
+ ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59,
+ ARMV7_PERFCTR_NEON_CYCLES = 0x5A,
+
+ ARMV7_PERFCTR_PMU0_EVENTS = 0x70,
+ ARMV7_PERFCTR_PMU1_EVENTS = 0x71,
+ ARMV7_PERFCTR_PMU_EVENTS = 0x72,
+};
+
+/* ARMv7 Cortex-A9 specific event types */
+enum armv7_a9_perf_types {
+ ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40,
+ ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41,
+ ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42,
+
+ ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50,
+ ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51,
+
+ ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60,
+ ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61,
+ ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62,
+ ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63,
+ ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64,
+ ARMV7_PERFCTR_DATA_EVICTION = 0x65,
+ ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66,
+ ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67,
+ ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68,
+
+ ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E,
+
+ ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70,
+ ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71,
+ ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72,
+ ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73,
+ ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74,
+
+ ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80,
+ ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81,
+ ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82,
+ ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83,
+ ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84,
+ ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85,
+ ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86,
+
+ ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A,
+ ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B,
+
+ ARMV7_PERFCTR_ISB_INST = 0x90,
+ ARMV7_PERFCTR_DSB_INST = 0x91,
+ ARMV7_PERFCTR_DMB_INST = 0x92,
+ ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93,
+
+ ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0,
+ ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1,
+ ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2,
+ ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3,
+ ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4,
+ ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5
+};
+
+/*
+ * Cortex-A8 HW events mapping
+ *
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ /*
+ * The performance counters don't differentiate between read
+ * and write accesses/misses so this isn't strictly correct,
+ * but it's the best we can do. Writes and reads get
+ * combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * Only ITLB misses and DTLB refills are supported.
+ * If users want the DTLB refills misses a raw counter
+ * must be used.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+/*
+ * Cortex-A9 HW events mapping
+ */
+static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] =
+ ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ /*
+ * The performance counters don't differentiate between read
+ * and write accesses/misses so this isn't strictly correct,
+ * but it's the best we can do. Writes and reads get
+ * combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * Only ITLB misses and DTLB refills are supported.
+ * If users want the DTLB refills misses a raw counter
+ * must be used.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+/*
+ * Perf Events counters
+ */
+enum armv7_counters {
+ ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */
+ ARMV7_COUNTER0 = 2, /* First event counter */
+};
+
+/*
+ * The cycle counter is ARMV7_CYCLE_COUNTER.
+ * The first event counter is ARMV7_COUNTER0.
+ * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
+ */
+#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1)
+
+/*
+ * ARMv7 low level PMNC access
+ */
+
+/*
+ * Per-CPU PMNC: config reg
+ */
+#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */
+#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */
+#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */
+#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */
+#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */
+#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/
+#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */
+#define ARMV7_PMNC_N_MASK 0x1f
+#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */
+
+/*
+ * Available counters
+ */
+#define ARMV7_CNT0 0 /* First event counter */
+#define ARMV7_CCNT 31 /* Cycle counter */
+
+/* Perf Event to low level counters mapping */
+#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0)
+
+/*
+ * CNTENS: counters enable reg
+ */
+#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENS_C (1 << ARMV7_CCNT)
+
+/*
+ * CNTENC: counters disable reg
+ */
+#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENC_C (1 << ARMV7_CCNT)
+
+/*
+ * INTENS: counters overflow interrupt enable reg
+ */
+#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENS_C (1 << ARMV7_CCNT)
+
+/*
+ * INTENC: counters overflow interrupt disable reg
+ */
+#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENC_C (1 << ARMV7_CCNT)
+
+/*
+ * EVTSEL: Event selection reg
+ */
+#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */
+
+/*
+ * SELECT: Counter selection reg
+ */
+#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */
+
+/*
+ * FLAG: counters overflow flag status reg
+ */
+#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_FLAG_C (1 << ARMV7_CCNT)
+#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */
+#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK
+
+static inline unsigned long armv7_pmnc_read(void)
+{
+ u32 val;
+ asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
+ return val;
+}
+
+static inline void armv7_pmnc_write(unsigned long val)
+{
+ val &= ARMV7_PMNC_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
+}
+
+static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
+{
+ return pmnc & ARMV7_OVERFLOWED_MASK;
+}
+
+static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
+ enum armv7_counters counter)
+{
+ int ret = 0;
+
+ if (counter == ARMV7_CYCLE_COUNTER)
+ ret = pmnc & ARMV7_FLAG_C;
+ else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
+ ret = pmnc & ARMV7_FLAG_P(counter);
+ else
+ pr_err("CPU%u checking wrong counter %d overflow status\n",
+ smp_processor_id(), counter);
+
+ return ret;
+}
+
+static inline int armv7_pmnc_select_counter(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
+ pr_err("CPU%u selecting wrong PMNC counter"
+ " %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7pmu_read_counter(int idx)
+{
+ unsigned long value = 0;
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
+ else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+ if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mrc p15, 0, %0, c9, c13, 2"
+ : "=r" (value));
+ } else
+ pr_err("CPU%u reading wrong counter %d\n",
+ smp_processor_id(), idx);
+
+ return value;
+}
+
+static inline void armv7pmu_write_counter(int idx, u32 value)
+{
+ if (idx == ARMV7_CYCLE_COUNTER)
+ asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+ else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+ if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mcr p15, 0, %0, c9, c13, 2"
+ : : "r" (value));
+ } else
+ pr_err("CPU%u writing wrong counter %d\n",
+ smp_processor_id(), idx);
+}
+
+static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
+{
+ if (armv7_pmnc_select_counter(idx) == idx) {
+ val &= ARMV7_EVTSEL_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
+ }
+}
+
+static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u enabling wrong PMNC counter"
+ " %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_CNTENS_C;
+ else
+ val = ARMV7_CNTENS_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
+{
+ u32 val;
+
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u disabling wrong PMNC counter"
+ " %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_CNTENC_C;
+ else
+ val = ARMV7_CNTENC_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u enabling wrong PMNC counter"
+ " interrupt enable %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_INTENS_C;
+ else
+ val = ARMV7_INTENS_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
+{
+ u32 val;
+
+ if ((idx != ARMV7_CYCLE_COUNTER) &&
+ ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+ pr_err("CPU%u disabling wrong PMNC counter"
+ " interrupt enable %d\n", smp_processor_id(), idx);
+ return -1;
+ }
+
+ if (idx == ARMV7_CYCLE_COUNTER)
+ val = ARMV7_INTENC_C;
+ else
+ val = ARMV7_INTENC_P(idx);
+
+ asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
+
+ return idx;
+}
+
+static inline u32 armv7_pmnc_getreset_flags(void)
+{
+ u32 val;
+
+ /* Read */
+ asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+
+ /* Write to clear flags */
+ val &= ARMV7_FLAG_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
+
+ return val;
+}
+
+#ifdef DEBUG
+static void armv7_pmnc_dump_regs(void)
+{
+ u32 val;
+ unsigned int cnt;
+
+ printk(KERN_INFO "PMNC registers dump:\n");
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
+ printk(KERN_INFO "PMNC =0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
+ printk(KERN_INFO "CNTENS=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
+ printk(KERN_INFO "INTENS=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+ printk(KERN_INFO "FLAGS =0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
+ printk(KERN_INFO "SELECT=0x%08x\n", val);
+
+ asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
+ printk(KERN_INFO "CCNT =0x%08x\n", val);
+
+ for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
+ armv7_pmnc_select_counter(cnt);
+ asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
+ printk(KERN_INFO "CNT[%d] count =0x%08x\n",
+ cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
+ printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
+ cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ }
+}
+#endif
+
+static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long flags;
+
+ /*
+ * Enable counter and interrupt, and set the counter to count
+ * the event that we're interested in.
+ */
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+
+ /*
+ * Disable counter
+ */
+ armv7_pmnc_disable_counter(idx);
+
+ /*
+ * Set event (if destined for PMNx counters)
+ * We don't need to set the event if it's a cycle count
+ */
+ if (idx != ARMV7_CYCLE_COUNTER)
+ armv7_pmnc_write_evtsel(idx, hwc->config_base);
+
+ /*
+ * Enable interrupt for this counter
+ */
+ armv7_pmnc_enable_intens(idx);
+
+ /*
+ * Enable counter
+ */
+ armv7_pmnc_enable_counter(idx);
+
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long flags;
+
+ /*
+ * Disable counter and interrupt
+ */
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+
+ /*
+ * Disable counter
+ */
+ armv7_pmnc_disable_counter(idx);
+
+ /*
+ * Disable interrupt for this counter
+ */
+ armv7_pmnc_disable_intens(idx);
+
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
+{
+ unsigned long pmnc;
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ /*
+ * Get and reset the IRQ flags
+ */
+ pmnc = armv7_pmnc_getreset_flags();
+
+ /*
+ * Did an overflow occur?
+ */
+ if (!armv7_pmnc_has_overflowed(pmnc))
+ return IRQ_NONE;
+
+ /*
+ * Handle the counter(s) overflow(s)
+ */
+ regs = get_irq_regs();
+
+ perf_sample_data_init(&data, 0);
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ /*
+ * We have a single interrupt for all counters. Check that
+ * each counter has overflowed before we process it.
+ */
+ if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
+ continue;
+
+ hwc = &event->hw;
+ armpmu_event_update(event, hwc, idx);
+ data.period = event->hw.last_period;
+ if (!armpmu_event_set_period(event, hwc, idx))
+ continue;
+
+ if (perf_event_overflow(event, 0, &data, regs))
+ armpmu->disable(hwc, idx);
+ }
+
+ /*
+ * Handle the pending perf events.
+ *
+ * Note: this call *must* be run with interrupts disabled. For
+ * platforms that can have the PMU interrupts raised as an NMI, this
+ * will not work.
+ */
+ irq_work_run();
+
+ return IRQ_HANDLED;
+}
+
+static void armv7pmu_start(void)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ /* Enable all counters */
+ armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_stop(void)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ /* Disable all counters */
+ armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *event)
+{
+ int idx;
+
+ /* Always place a cycle counter into the cycle counter. */
+ if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
+ if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
+ return -EAGAIN;
+
+ return ARMV7_CYCLE_COUNTER;
+ } else {
+ /*
+ * For anything other than a cycle counter, try and use
+ * the events counters
+ */
+ for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
+ if (!test_and_set_bit(idx, cpuc->used_mask))
+ return idx;
+ }
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+ }
+}
+
+static struct arm_pmu armv7pmu = {
+ .handle_irq = armv7pmu_handle_irq,
+ .enable = armv7pmu_enable_event,
+ .disable = armv7pmu_disable_event,
+ .read_counter = armv7pmu_read_counter,
+ .write_counter = armv7pmu_write_counter,
+ .get_event_idx = armv7pmu_get_event_idx,
+ .start = armv7pmu_start,
+ .stop = armv7pmu_stop,
+ .raw_event_mask = 0xFF,
+ .max_period = (1LLU << 32) - 1,
+};
+
+static u32 __init armv7_reset_read_pmnc(void)
+{
+ u32 nb_cnt;
+
+ /* Initialize & Reset PMNC: C and P bits */
+ armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
+
+ /* Read the nb of CNTx counters supported from PMNC */
+ nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
+
+ /* Add the CPU cycles counter and return */
+ return nb_cnt + 1;
+}
+
+static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+{
+ armv7pmu.id = ARM_PERF_PMU_ID_CA8;
+ armv7pmu.name = "ARMv7 Cortex-A8";
+ armv7pmu.cache_map = &armv7_a8_perf_cache_map;
+ armv7pmu.event_map = &armv7_a8_perf_map;
+ armv7pmu.num_events = armv7_reset_read_pmnc();
+ return &armv7pmu;
+}
+
+static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+{
+ armv7pmu.id = ARM_PERF_PMU_ID_CA9;
+ armv7pmu.name = "ARMv7 Cortex-A9";
+ armv7pmu.cache_map = &armv7_a9_perf_cache_map;
+ armv7pmu.event_map = &armv7_a9_perf_map;
+ armv7pmu.num_events = armv7_reset_read_pmnc();
+ return &armv7pmu;
+}
+#else
+static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+{
+ return NULL;
+}
+
+static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_CPU_V7 */
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
new file mode 100644
index 0000000..28cd3b0
--- /dev/null
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -0,0 +1,807 @@
+/*
+ * ARMv5 [xscale] Performance counter handling code.
+ *
+ * Copyright (C) 2010, ARM Ltd., Will Deacon <will.deacon@arm.com>
+ *
+ * Based on the previous xscale OProfile code.
+ *
+ * There are two variants of the xscale PMU that we support:
+ * - xscale1pmu: 2 event counters and a cycle counter
+ * - xscale2pmu: 4 event counters and a cycle counter
+ * The two variants share event definitions, but have different
+ * PMU structures.
+ */
+
+#ifdef CONFIG_CPU_XSCALE
+enum xscale_perf_types {
+ XSCALE_PERFCTR_ICACHE_MISS = 0x00,
+ XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01,
+ XSCALE_PERFCTR_DATA_STALL = 0x02,
+ XSCALE_PERFCTR_ITLB_MISS = 0x03,
+ XSCALE_PERFCTR_DTLB_MISS = 0x04,
+ XSCALE_PERFCTR_BRANCH = 0x05,
+ XSCALE_PERFCTR_BRANCH_MISS = 0x06,
+ XSCALE_PERFCTR_INSTRUCTION = 0x07,
+ XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08,
+ XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09,
+ XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A,
+ XSCALE_PERFCTR_DCACHE_MISS = 0x0B,
+ XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C,
+ XSCALE_PERFCTR_PC_CHANGED = 0x0D,
+ XSCALE_PERFCTR_BCU_REQUEST = 0x10,
+ XSCALE_PERFCTR_BCU_FULL = 0x11,
+ XSCALE_PERFCTR_BCU_DRAIN = 0x12,
+ XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14,
+ XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15,
+ XSCALE_PERFCTR_RMW = 0x16,
+ /* XSCALE_PERFCTR_CCNT is not hardware defined */
+ XSCALE_PERFCTR_CCNT = 0xFE,
+ XSCALE_PERFCTR_UNUSED = 0xFF,
+};
+
+enum xscale_counters {
+ XSCALE_CYCLE_COUNTER = 1,
+ XSCALE_COUNTER0,
+ XSCALE_COUNTER1,
+ XSCALE_COUNTER2,
+ XSCALE_COUNTER3,
+};
+
+static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT,
+ [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
+ [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+#define XSCALE_PMU_ENABLE 0x001
+#define XSCALE_PMN_RESET 0x002
+#define XSCALE_CCNT_RESET 0x004
+#define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET)
+#define XSCALE_PMU_CNT64 0x008
+
+#define XSCALE1_OVERFLOWED_MASK 0x700
+#define XSCALE1_CCOUNT_OVERFLOW 0x400
+#define XSCALE1_COUNT0_OVERFLOW 0x100
+#define XSCALE1_COUNT1_OVERFLOW 0x200
+#define XSCALE1_CCOUNT_INT_EN 0x040
+#define XSCALE1_COUNT0_INT_EN 0x010
+#define XSCALE1_COUNT1_INT_EN 0x020
+#define XSCALE1_COUNT0_EVT_SHFT 12
+#define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT)
+#define XSCALE1_COUNT1_EVT_SHFT 20
+#define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT)
+
+static inline u32
+xscale1pmu_read_pmnc(void)
+{
+ u32 val;
+ asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
+ return val;
+}
+
+static inline void
+xscale1pmu_write_pmnc(u32 val)
+{
+ /* upper 4bits and 7, 11 are write-as-0 */
+ val &= 0xffff77f;
+ asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
+}
+
+static inline int
+xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
+ enum xscale_counters counter)
+{
+ int ret = 0;
+
+ switch (counter) {
+ case XSCALE_CYCLE_COUNTER:
+ ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
+ break;
+ case XSCALE_COUNTER0:
+ ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
+ break;
+ case XSCALE_COUNTER1:
+ ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
+ break;
+ default:
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+ }
+
+ return ret;
+}
+
+static irqreturn_t
+xscale1pmu_handle_irq(int irq_num, void *dev)
+{
+ unsigned long pmnc;
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ /*
+ * NOTE: there's an A stepping erratum that states if an overflow
+ * bit already exists and another occurs, the previous
+ * Overflow bit gets cleared. There's no workaround.
+ * Fixed in B stepping or later.
+ */
+ pmnc = xscale1pmu_read_pmnc();
+
+ /*
+ * Write the value back to clear the overflow flags. Overflow
+ * flags remain in pmnc for use below. We also disable the PMU
+ * while we process the interrupt.
+ */
+ xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
+
+ if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
+ return IRQ_NONE;
+
+ regs = get_irq_regs();
+
+ perf_sample_data_init(&data, 0);
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
+ continue;
+
+ hwc = &event->hw;
+ armpmu_event_update(event, hwc, idx);
+ data.period = event->hw.last_period;
+ if (!armpmu_event_set_period(event, hwc, idx))
+ continue;
+
+ if (perf_event_overflow(event, 0, &data, regs))
+ armpmu->disable(hwc, idx);
+ }
+
+ irq_work_run();
+
+ /*
+ * Re-enable the PMU.
+ */
+ pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
+ xscale1pmu_write_pmnc(pmnc);
+
+ return IRQ_HANDLED;
+}
+
+static void
+xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ switch (idx) {
+ case XSCALE_CYCLE_COUNTER:
+ mask = 0;
+ evt = XSCALE1_CCOUNT_INT_EN;
+ break;
+ case XSCALE_COUNTER0:
+ mask = XSCALE1_COUNT0_EVT_MASK;
+ evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
+ XSCALE1_COUNT0_INT_EN;
+ break;
+ case XSCALE_COUNTER1:
+ mask = XSCALE1_COUNT1_EVT_MASK;
+ evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
+ XSCALE1_COUNT1_INT_EN;
+ break;
+ default:
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = xscale1pmu_read_pmnc();
+ val &= ~mask;
+ val |= evt;
+ xscale1pmu_write_pmnc(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ switch (idx) {
+ case XSCALE_CYCLE_COUNTER:
+ mask = XSCALE1_CCOUNT_INT_EN;
+ evt = 0;
+ break;
+ case XSCALE_COUNTER0:
+ mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
+ evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER1:
+ mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
+ evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
+ break;
+ default:
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = xscale1pmu_read_pmnc();
+ val &= ~mask;
+ val |= evt;
+ xscale1pmu_write_pmnc(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *event)
+{
+ if (XSCALE_PERFCTR_CCNT == event->config_base) {
+ if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
+ return -EAGAIN;
+
+ return XSCALE_CYCLE_COUNTER;
+ } else {
+ if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask))
+ return XSCALE_COUNTER1;
+
+ if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask))
+ return XSCALE_COUNTER0;
+
+ return -EAGAIN;
+ }
+}
+
+static void
+xscale1pmu_start(void)
+{
+ unsigned long flags, val;
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = xscale1pmu_read_pmnc();
+ val |= XSCALE_PMU_ENABLE;
+ xscale1pmu_write_pmnc(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale1pmu_stop(void)
+{
+ unsigned long flags, val;
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = xscale1pmu_read_pmnc();
+ val &= ~XSCALE_PMU_ENABLE;
+ xscale1pmu_write_pmnc(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline u32
+xscale1pmu_read_counter(int counter)
+{
+ u32 val = 0;
+
+ switch (counter) {
+ case XSCALE_CYCLE_COUNTER:
+ asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
+ break;
+ case XSCALE_COUNTER0:
+ asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
+ break;
+ case XSCALE_COUNTER1:
+ asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
+ break;
+ }
+
+ return val;
+}
+
+static inline void
+xscale1pmu_write_counter(int counter, u32 val)
+{
+ switch (counter) {
+ case XSCALE_CYCLE_COUNTER:
+ asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
+ break;
+ case XSCALE_COUNTER0:
+ asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
+ break;
+ case XSCALE_COUNTER1:
+ asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
+ break;
+ }
+}
+
+static const struct arm_pmu xscale1pmu = {
+ .id = ARM_PERF_PMU_ID_XSCALE1,
+ .name = "xscale1",
+ .handle_irq = xscale1pmu_handle_irq,
+ .enable = xscale1pmu_enable_event,
+ .disable = xscale1pmu_disable_event,
+ .read_counter = xscale1pmu_read_counter,
+ .write_counter = xscale1pmu_write_counter,
+ .get_event_idx = xscale1pmu_get_event_idx,
+ .start = xscale1pmu_start,
+ .stop = xscale1pmu_stop,
+ .cache_map = &xscale_perf_cache_map,
+ .event_map = &xscale_perf_map,
+ .raw_event_mask = 0xFF,
+ .num_events = 3,
+ .max_period = (1LLU << 32) - 1,
+};
+
+static const struct arm_pmu *__init xscale1pmu_init(void)
+{
+ return &xscale1pmu;
+}
+
+#define XSCALE2_OVERFLOWED_MASK 0x01f
+#define XSCALE2_CCOUNT_OVERFLOW 0x001
+#define XSCALE2_COUNT0_OVERFLOW 0x002
+#define XSCALE2_COUNT1_OVERFLOW 0x004
+#define XSCALE2_COUNT2_OVERFLOW 0x008
+#define XSCALE2_COUNT3_OVERFLOW 0x010
+#define XSCALE2_CCOUNT_INT_EN 0x001
+#define XSCALE2_COUNT0_INT_EN 0x002
+#define XSCALE2_COUNT1_INT_EN 0x004
+#define XSCALE2_COUNT2_INT_EN 0x008
+#define XSCALE2_COUNT3_INT_EN 0x010
+#define XSCALE2_COUNT0_EVT_SHFT 0
+#define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT)
+#define XSCALE2_COUNT1_EVT_SHFT 8
+#define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT)
+#define XSCALE2_COUNT2_EVT_SHFT 16
+#define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT)
+#define XSCALE2_COUNT3_EVT_SHFT 24
+#define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT)
+
+static inline u32
+xscale2pmu_read_pmnc(void)
+{
+ u32 val;
+ asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
+ /* bits 1-2 and 4-23 are read-unpredictable */
+ return val & 0xff000009;
+}
+
+static inline void
+xscale2pmu_write_pmnc(u32 val)
+{
+ /* bits 4-23 are write-as-0, 24-31 are write ignored */
+ val &= 0xf;
+ asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
+}
+
+static inline u32
+xscale2pmu_read_overflow_flags(void)
+{
+ u32 val;
+ asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
+ return val;
+}
+
+static inline void
+xscale2pmu_write_overflow_flags(u32 val)
+{
+ asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
+}
+
+static inline u32
+xscale2pmu_read_event_select(void)
+{
+ u32 val;
+ asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
+ return val;
+}
+
+static inline void
+xscale2pmu_write_event_select(u32 val)
+{
+ asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
+}
+
+static inline u32
+xscale2pmu_read_int_enable(void)
+{
+ u32 val;
+ asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
+ return val;
+}
+
+static void
+xscale2pmu_write_int_enable(u32 val)
+{
+ asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
+}
+
+static inline int
+xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
+ enum xscale_counters counter)
+{
+ int ret = 0;
+
+ switch (counter) {
+ case XSCALE_CYCLE_COUNTER:
+ ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
+ break;
+ case XSCALE_COUNTER0:
+ ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
+ break;
+ case XSCALE_COUNTER1:
+ ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
+ break;
+ case XSCALE_COUNTER2:
+ ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
+ break;
+ case XSCALE_COUNTER3:
+ ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
+ break;
+ default:
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+ }
+
+ return ret;
+}
+
+static irqreturn_t
+xscale2pmu_handle_irq(int irq_num, void *dev)
+{
+ unsigned long pmnc, of_flags;
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ /* Disable the PMU. */
+ pmnc = xscale2pmu_read_pmnc();
+ xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
+
+ /* Check the overflow flag register. */
+ of_flags = xscale2pmu_read_overflow_flags();
+ if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
+ return IRQ_NONE;
+
+ /* Clear the overflow bits. */
+ xscale2pmu_write_overflow_flags(of_flags);
+
+ regs = get_irq_regs();
+
+ perf_sample_data_init(&data, 0);
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+ continue;
+
+ hwc = &event->hw;
+ armpmu_event_update(event, hwc, idx);
+ data.period = event->hw.last_period;
+ if (!armpmu_event_set_period(event, hwc, idx))
+ continue;
+
+ if (perf_event_overflow(event, 0, &data, regs))
+ armpmu->disable(hwc, idx);
+ }
+
+ irq_work_run();
+
+ /*
+ * Re-enable the PMU.
+ */
+ pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
+ xscale2pmu_write_pmnc(pmnc);
+
+ return IRQ_HANDLED;
+}
+
+static void
+xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long flags, ien, evtsel;
+
+ ien = xscale2pmu_read_int_enable();
+ evtsel = xscale2pmu_read_event_select();
+
+ switch (idx) {
+ case XSCALE_CYCLE_COUNTER:
+ ien |= XSCALE2_CCOUNT_INT_EN;
+ break;
+ case XSCALE_COUNTER0:
+ ien |= XSCALE2_COUNT0_INT_EN;
+ evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
+ evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER1:
+ ien |= XSCALE2_COUNT1_INT_EN;
+ evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
+ evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER2:
+ ien |= XSCALE2_COUNT2_INT_EN;
+ evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
+ evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER3:
+ ien |= XSCALE2_COUNT3_INT_EN;
+ evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
+ evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
+ break;
+ default:
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ xscale2pmu_write_event_select(evtsel);
+ xscale2pmu_write_int_enable(ien);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+ unsigned long flags, ien, evtsel;
+
+ ien = xscale2pmu_read_int_enable();
+ evtsel = xscale2pmu_read_event_select();
+
+ switch (idx) {
+ case XSCALE_CYCLE_COUNTER:
+ ien &= ~XSCALE2_CCOUNT_INT_EN;
+ break;
+ case XSCALE_COUNTER0:
+ ien &= ~XSCALE2_COUNT0_INT_EN;
+ evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
+ evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER1:
+ ien &= ~XSCALE2_COUNT1_INT_EN;
+ evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
+ evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER2:
+ ien &= ~XSCALE2_COUNT2_INT_EN;
+ evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
+ evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+ break;
+ case XSCALE_COUNTER3:
+ ien &= ~XSCALE2_COUNT3_INT_EN;
+ evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
+ evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+ break;
+ default:
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ xscale2pmu_write_event_select(evtsel);
+ xscale2pmu_write_int_enable(ien);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *event)
+{
+ int idx = xscale1pmu_get_event_idx(cpuc, event);
+ if (idx >= 0)
+ goto out;
+
+ if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
+ idx = XSCALE_COUNTER3;
+ else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
+ idx = XSCALE_COUNTER2;
+out:
+ return idx;
+}
+
+static void
+xscale2pmu_start(void)
+{
+ unsigned long flags, val;
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
+ val |= XSCALE_PMU_ENABLE;
+ xscale2pmu_write_pmnc(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale2pmu_stop(void)
+{
+ unsigned long flags, val;
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = xscale2pmu_read_pmnc();
+ val &= ~XSCALE_PMU_ENABLE;
+ xscale2pmu_write_pmnc(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline u32
+xscale2pmu_read_counter(int counter)
+{
+ u32 val = 0;
+
+ switch (counter) {
+ case XSCALE_CYCLE_COUNTER:
+ asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
+ break;
+ case XSCALE_COUNTER0:
+ asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
+ break;
+ case XSCALE_COUNTER1:
+ asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
+ break;
+ case XSCALE_COUNTER2:
+ asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
+ break;
+ case XSCALE_COUNTER3:
+ asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
+ break;
+ }
+
+ return val;
+}
+
+static inline void
+xscale2pmu_write_counter(int counter, u32 val)
+{
+ switch (counter) {
+ case XSCALE_CYCLE_COUNTER:
+ asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
+ break;
+ case XSCALE_COUNTER0:
+ asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
+ break;
+ case XSCALE_COUNTER1:
+ asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
+ break;
+ case XSCALE_COUNTER2:
+ asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
+ break;
+ case XSCALE_COUNTER3:
+ asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
+ break;
+ }
+}
+
+static const struct arm_pmu xscale2pmu = {
+ .id = ARM_PERF_PMU_ID_XSCALE2,
+ .name = "xscale2",
+ .handle_irq = xscale2pmu_handle_irq,
+ .enable = xscale2pmu_enable_event,
+ .disable = xscale2pmu_disable_event,
+ .read_counter = xscale2pmu_read_counter,
+ .write_counter = xscale2pmu_write_counter,
+ .get_event_idx = xscale2pmu_get_event_idx,
+ .start = xscale2pmu_start,
+ .stop = xscale2pmu_stop,
+ .cache_map = &xscale_perf_cache_map,
+ .event_map = &xscale_perf_map,
+ .raw_event_mask = 0xFF,
+ .num_events = 5,
+ .max_period = (1LLU << 32) - 1,
+};
+
+static const struct arm_pmu *__init xscale2pmu_init(void)
+{
+ return &xscale2pmu;
+}
+#else
+static const struct arm_pmu *__init xscale1pmu_init(void)
+{
+ return NULL;
+}
+
+static const struct arm_pmu *__init xscale2pmu_init(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_CPU_XSCALE */
diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c
new file mode 100644
index 0000000..a4b1b07
--- /dev/null
+++ b/arch/arm/kernel/pj4-cp0.c
@@ -0,0 +1,94 @@
+/*
+ * linux/arch/arm/kernel/pj4-cp0.c
+ *
+ * PJ4 iWMMXt coprocessor context switching and handling
+ *
+ * Copyright (c) 2010 Marvell International Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/thread_notify.h>
+
+static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+ struct thread_info *thread = t;
+
+ switch (cmd) {
+ case THREAD_NOTIFY_FLUSH:
+ /*
+ * flush_thread() zeroes thread->fpstate, so no need
+ * to do anything here.
+ *
+ * FALLTHROUGH: Ensure we don't try to overwrite our newly
+ * initialised state information on the first fault.
+ */
+
+ case THREAD_NOTIFY_EXIT:
+ iwmmxt_task_release(thread);
+ break;
+
+ case THREAD_NOTIFY_SWITCH:
+ iwmmxt_task_switch(thread);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block iwmmxt_notifier_block = {
+ .notifier_call = iwmmxt_do,
+};
+
+
+static u32 __init pj4_cp_access_read(void)
+{
+ u32 value;
+
+ __asm__ __volatile__ (
+ "mrc p15, 0, %0, c1, c0, 2\n\t"
+ : "=r" (value));
+ return value;
+}
+
+static void __init pj4_cp_access_write(u32 value)
+{
+ u32 temp;
+
+ __asm__ __volatile__ (
+ "mcr p15, 0, %1, c1, c0, 2\n\t"
+ "mrc p15, 0, %0, c1, c0, 2\n\t"
+ "mov %0, %0\n\t"
+ "sub pc, pc, #4\n\t"
+ : "=r" (temp) : "r" (value));
+}
+
+
+/*
+ * Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy
+ * switch code handle iWMMXt context switching.
+ */
+static int __init pj4_cp0_init(void)
+{
+ u32 cp_access;
+
+ cp_access = pj4_cp_access_read() & ~0xf;
+ pj4_cp_access_write(cp_access);
+
+ printk(KERN_INFO "PJ4 iWMMXt coprocessor enabled.\n");
+ elf_hwcap |= HWCAP_IWMMXT;
+ thread_register_notifier(&iwmmxt_notifier_block);
+
+ return 0;
+}
+
+late_initcall(pj4_cp0_init);
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 3e97483..19c6816 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -1060,8 +1060,8 @@
goto out;
if ((gen_type & implied_type) != gen_type) {
- ret = -EINVAL;
- goto out;
+ ret = -EINVAL;
+ goto out;
}
attr.bp_len = gen_len;
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8c19595..bbca898 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -16,6 +16,7 @@
#include <linux/cache.h>
#include <linux/profile.h>
#include <linux/errno.h>
+#include <linux/ftrace.h>
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/cpu.h>
@@ -457,7 +458,7 @@
}
#ifdef CONFIG_LOCAL_TIMERS
-asmlinkage void __exception do_local_timer(struct pt_regs *regs)
+asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
int cpu = smp_processor_id();
@@ -544,7 +545,7 @@
*
* Bit 0 - Inter-processor function call
*/
-asmlinkage void __exception do_IPI(struct pt_regs *regs)
+asmlinkage void __exception_irq_entry do_IPI(struct pt_regs *regs)
{
unsigned int cpu = smp_processor_id();
struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index cead889..897c1a8 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -101,6 +101,7 @@
__exception_text_start = .;
*(.exception.text)
__exception_text_end = .;
+ IRQENTRY_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 3b9a32a..a4ed390 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -9,6 +9,12 @@
Say 'Y' here if you want your kernel to support the
Marvell DB-MV88AP510 Development Board.
+ config MACH_CM_A510
+ bool "CompuLab CM-A510 Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ CompuLab CM-A510 Board.
+
endmenu
endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index 7ab3be5..fa0f018 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -1,3 +1,4 @@
-obj-y += common.o addr-map.o irq.o pcie.o
+obj-y += common.o addr-map.o irq.o pcie.o mpp.o
obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
+obj-$(CONFIG_MACH_CM_A510) += cm-a510.o
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
new file mode 100644
index 0000000..96e0e94
--- /dev/null
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -0,0 +1,95 @@
+/*
+ * arch/arm/mach-dove/cm-a510.c
+ *
+ * Copyright (C) 2010 CompuLab, Ltd.
+ * Konstantin Sinyuk <kostyas@compulab.co.il>
+ *
+ * Based on Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/dove.h>
+
+#include "common.h"
+
+static struct mv643xx_eth_platform_data cm_a510_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data cm_a510_sata_data = {
+ .n_ports = 1,
+};
+
+/*
+ * SPI Devices:
+ * SPI0: 1M Flash Winbond w25q32bv
+ */
+static const struct flash_platform_data cm_a510_spi_flash_data = {
+ .type = "w25q32bv",
+};
+
+static struct spi_board_info __initdata cm_a510_spi_flash_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &cm_a510_spi_flash_data,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static int __init cm_a510_pci_init(void)
+{
+ if (machine_is_cm_a510())
+ dove_pcie_init(1, 1);
+
+ return 0;
+}
+
+subsys_initcall(cm_a510_pci_init);
+
+/* Board Init */
+static void __init cm_a510_init(void)
+{
+ /*
+ * Basic Dove setup. Needs to be called early.
+ */
+ dove_init();
+
+ dove_ge00_init(&cm_a510_ge00_data);
+ dove_ehci0_init();
+ dove_ehci1_init();
+ dove_sata_init(&cm_a510_sata_data);
+ dove_sdio0_init();
+ dove_sdio1_init();
+ dove_spi0_init();
+ dove_spi1_init();
+ dove_uart0_init();
+ dove_uart1_init();
+ dove_i2c_init();
+ spi_register_board_info(cm_a510_spi_flash_info,
+ ARRAY_SIZE(cm_a510_spi_flash_info));
+}
+
+MACHINE_START(CM_A510, "Compulab CM-A510 Board")
+ .boot_params = 0x00000100,
+ .init_machine = cm_a510_init,
+ .map_io = dove_map_io,
+ .init_irq = dove_init_irq,
+ .timer = &dove_timer,
+MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index f6a0839..27b4145 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -131,14 +131,21 @@
#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014)
#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018)
#define DOVE_GPIO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe8400)
#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1)
#define DOVE_NAND_GPIO_EN (1 << 0)
#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_VIRT_BASE + 0x40)
-
+#define DOVE_SPI_GPIO_SEL (1 << 5)
+#define DOVE_UART1_GPIO_SEL (1 << 4)
+#define DOVE_AU1_GPIO_SEL (1 << 3)
+#define DOVE_CAM_GPIO_SEL (1 << 2)
+#define DOVE_SD1_GPIO_SEL (1 << 1)
+#define DOVE_SD0_GPIO_SEL (1 << 0)
/* Power Management */
#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+#define DOVE_PMU_SIG_CTRL (DOVE_PMU_VIRT_BASE + 0x802c)
/* Real Time Clock */
#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500)
diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h
index 0ee70ff..340bb7a 100644
--- a/arch/arm/mach-dove/include/mach/gpio.h
+++ b/arch/arm/mach-dove/include/mach/gpio.h
@@ -14,12 +14,14 @@
#include <plat/gpio.h>
#include <asm-generic/gpio.h> /* cansleep wrappers */
-#define GPIO_MAX 64
+#define GPIO_MAX 72
#define GPIO_BASE_LO (DOVE_GPIO_VIRT_BASE + 0x00)
#define GPIO_BASE_HI (DOVE_GPIO_VIRT_BASE + 0x20)
-#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
+#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : \
+ ((pin < 64) ? GPIO_BASE_HI : \
+ DOVE_GPIO2_VIRT_BASE))
#define GPIO_OUT(pin) (GPIO_BASE(pin) + 0x00)
#define GPIO_IO_CONF(pin) (GPIO_BASE(pin) + 0x04)
diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c
new file mode 100644
index 0000000..71db2bd
--- /dev/null
+++ b/arch/arm/mach-dove/mpp.c
@@ -0,0 +1,212 @@
+/*
+ * arch/arm/mach-dove/mpp.c
+ *
+ * MPP functions for Marvell Dove SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/dove.h>
+
+#include "mpp.h"
+
+#define MPP_NR_REGS 4
+#define MPP_CTRL(i) ((i) == 3 ? \
+ DOVE_MPP_CTRL4_VIRT_BASE : \
+ DOVE_MPP_VIRT_BASE + (i) * 4)
+#define PMU_SIG_REGS 2
+#define PMU_SIG_CTRL(i) (DOVE_PMU_SIG_CTRL + (i) * 4)
+
+struct dove_mpp_grp {
+ int start;
+ int end;
+};
+
+static struct dove_mpp_grp dove_mpp_grp[] = {
+ [MPP_24_39] = {
+ .start = 24,
+ .end = 39,
+ },
+ [MPP_40_45] = {
+ .start = 40,
+ .end = 45,
+ },
+ [MPP_46_51] = {
+ .start = 40,
+ .end = 45,
+ },
+ [MPP_58_61] = {
+ .start = 58,
+ .end = 61,
+ },
+ [MPP_62_63] = {
+ .start = 62,
+ .end = 63,
+ },
+};
+
+static void dove_mpp_gpio_mode(int start, int end, int gpio_mode)
+{
+ int i;
+
+ for (i = start; i <= end; i++)
+ orion_gpio_set_valid(i, gpio_mode);
+}
+
+static void dove_mpp_dump_regs(void)
+{
+#ifdef DEBUG
+ int i;
+
+ pr_debug("MPP_CTRL regs:");
+ for (i = 0; i < MPP_NR_REGS; i++)
+ printk(" %08x", readl(MPP_CTRL(i)));
+ printk("\n");
+
+ pr_debug("PMU_SIG_CTRL regs:");
+ for (i = 0; i < PMU_SIG_REGS; i++)
+ printk(" %08x", readl(PMU_SIG_CTRL(i)));
+ printk("\n");
+
+ pr_debug("PMU_MPP_GENERAL_CTRL: %08x\n", readl(DOVE_PMU_MPP_GENERAL_CTRL));
+ pr_debug("MPP_GENERAL: %08x\n", readl(DOVE_MPP_GENERAL_VIRT_BASE));
+#endif
+}
+
+static void dove_mpp_cfg_nfc(int sel)
+{
+ u32 mpp_gen_cfg = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+
+ mpp_gen_cfg &= ~0x1;
+ mpp_gen_cfg |= sel;
+ writel(mpp_gen_cfg, DOVE_MPP_GENERAL_VIRT_BASE);
+
+ dove_mpp_gpio_mode(64, 71, GPIO_OUTPUT_OK);
+}
+
+static void dove_mpp_cfg_au1(int sel)
+{
+ u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+ u32 ssp_ctrl1 = readl(DOVE_SSP_CTRL_STATUS_1);
+ u32 mpp_gen_ctrl = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+ u32 global_cfg_2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+ mpp_ctrl4 &= ~(DOVE_AU1_GPIO_SEL);
+ ssp_ctrl1 &= ~(DOVE_SSP_ON_AU1);
+ mpp_gen_ctrl &= ~(DOVE_AU1_SPDIFO_GPIO_EN);
+ global_cfg_2 &= ~(DOVE_TWSI_OPTION3_GPIO);
+
+ if (!sel || sel == 0x2)
+ dove_mpp_gpio_mode(52, 57, 0);
+ else
+ dove_mpp_gpio_mode(52, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK);
+
+ if (sel & 0x1) {
+ global_cfg_2 |= DOVE_TWSI_OPTION3_GPIO;
+ dove_mpp_gpio_mode(56, 57, 0);
+ }
+ if (sel & 0x2) {
+ mpp_gen_ctrl |= DOVE_AU1_SPDIFO_GPIO_EN;
+ dove_mpp_gpio_mode(57, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK);
+ }
+ if (sel & 0x4) {
+ ssp_ctrl1 |= DOVE_SSP_ON_AU1;
+ dove_mpp_gpio_mode(52, 55, 0);
+ }
+ if (sel & 0x8)
+ mpp_ctrl4 |= DOVE_AU1_GPIO_SEL;
+
+ writel(mpp_ctrl4, DOVE_MPP_CTRL4_VIRT_BASE);
+ writel(ssp_ctrl1, DOVE_SSP_CTRL_STATUS_1);
+ writel(mpp_gen_ctrl, DOVE_MPP_GENERAL_VIRT_BASE);
+ writel(global_cfg_2, DOVE_GLOBAL_CONFIG_2);
+}
+
+static void dove_mpp_conf_grp(int num, int sel, u32 *mpp_ctrl)
+{
+ int start = dove_mpp_grp[num].start;
+ int end = dove_mpp_grp[num].end;
+ int gpio_mode = sel ? GPIO_OUTPUT_OK | GPIO_INPUT_OK : 0;
+
+ *mpp_ctrl &= ~(0x1 << num);
+ *mpp_ctrl |= sel << num;
+
+ dove_mpp_gpio_mode(start, end, gpio_mode);
+}
+
+void __init dove_mpp_conf(unsigned int *mpp_list)
+{
+ u32 mpp_ctrl[MPP_NR_REGS];
+ u32 pmu_mpp_ctrl = 0;
+ u32 pmu_sig_ctrl[PMU_SIG_REGS];
+ int i;
+
+ /* Initialize gpiolib. */
+ orion_gpio_init();
+
+ for (i = 0; i < MPP_NR_REGS; i++)
+ mpp_ctrl[i] = readl(MPP_CTRL(i));
+
+ for (i = 0; i < PMU_SIG_REGS; i++)
+ pmu_sig_ctrl[i] = readl(PMU_SIG_CTRL(i));
+
+ pmu_mpp_ctrl = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+
+ dove_mpp_dump_regs();
+
+ for ( ; *mpp_list != MPP_END; mpp_list++) {
+ unsigned int num = MPP_NUM(*mpp_list);
+ unsigned int sel = MPP_SEL(*mpp_list);
+ int shift, gpio_mode;
+
+ if (num > MPP_MAX) {
+ pr_err("dove: invalid MPP number (%u)\n", num);
+ continue;
+ }
+
+ if (*mpp_list & MPP_NFC_MASK) {
+ dove_mpp_cfg_nfc(sel);
+ continue;
+ }
+
+ if (*mpp_list & MPP_AU1_MASK) {
+ dove_mpp_cfg_au1(sel);
+ continue;
+ }
+
+ if (*mpp_list & MPP_GRP_MASK) {
+ dove_mpp_conf_grp(num, sel, &mpp_ctrl[3]);
+ continue;
+ }
+
+ shift = (num & 7) << 2;
+ if (*mpp_list & MPP_PMU_MASK) {
+ pmu_mpp_ctrl |= (0x1 << num);
+ pmu_sig_ctrl[num / 8] &= ~(0xf << shift);
+ pmu_sig_ctrl[num / 8] |= 0xf << shift;
+ gpio_mode = 0;
+ } else {
+ mpp_ctrl[num / 8] &= ~(0xf << shift);
+ mpp_ctrl[num / 8] |= sel << shift;
+ gpio_mode = GPIO_OUTPUT_OK | GPIO_INPUT_OK;
+ }
+
+ orion_gpio_set_valid(num, gpio_mode);
+ }
+
+ for (i = 0; i < MPP_NR_REGS; i++)
+ writel(mpp_ctrl[i], MPP_CTRL(i));
+
+ for (i = 0; i < PMU_SIG_REGS; i++)
+ writel(pmu_sig_ctrl[i], PMU_SIG_CTRL(i));
+
+ writel(pmu_mpp_ctrl, DOVE_PMU_MPP_GENERAL_CTRL);
+
+ dove_mpp_dump_regs();
+}
diff --git a/arch/arm/mach-dove/mpp.h b/arch/arm/mach-dove/mpp.h
new file mode 100644
index 0000000..2a43ce4
--- /dev/null
+++ b/arch/arm/mach-dove/mpp.h
@@ -0,0 +1,220 @@
+#ifndef __ARCH_DOVE_MPP_CODED_H
+#define __ARCH_DOVE_MPP_CODED_H
+
+#define MPP(_num, _mode, _pmu, _grp, _au1, _nfc) ( \
+/* MPP/group number */ ((_num) & 0xff) | \
+/* MPP select value */ (((_mode) & 0xf) << 8) | \
+/* MPP PMU */ ((!!(_pmu)) << 12) | \
+/* group flag */ ((!!(_grp)) << 13) | \
+/* AU1 flag */ ((!!(_au1)) << 14) | \
+/* NFCE flag */ ((!!(_nfc)) << 15))
+
+#define MPP_MAX 71
+
+#define MPP_NUM(x) ((x) & 0xff)
+#define MPP_SEL(x) (((x) >> 8) & 0xf)
+
+#define MPP_PMU_MASK MPP(0, 0x0, 1, 0, 0, 0)
+#define MPP_GRP_MASK MPP(0, 0x0, 0, 1, 0, 0)
+#define MPP_AU1_MASK MPP(0, 0x0, 0, 0, 1, 0)
+#define MPP_NFC_MASK MPP(0, 0x0, 0, 0, 0, 1)
+
+#define MPP_END MPP(0xff, 0xf, 1, 1, 1, 1)
+
+#define MPP_PMU_DRIVE_0 0x1
+#define MPP_PMU_DRIVE_1 0x2
+#define MPP_PMU_SDI 0x3
+#define MPP_PMU_CPU_PWRDWN 0x4
+#define MPP_PMU_STBY_PWRDWN 0x5
+#define MPP_PMU_CORE_PWR_GOOD 0x8
+#define MPP_PMU_BAT_FAULT 0xa
+#define MPP_PMU_EXT0_WU 0xb
+#define MPP_PMU_EXT1_WU 0xc
+#define MPP_PMU_EXT2_WU 0xd
+#define MPP_PMU_BLINK 0xe
+#define MPP_PMU(_num, _mode) MPP((_num), MPP_PMU_##_mode, 1, 0, 0, 0)
+
+#define MPP_PIN(_num, _mode) MPP((_num), (_mode), 0, 0, 0, 0)
+#define MPP_GRP(_grp, _mode) MPP((_grp), (_mode), 0, 1, 0, 0)
+#define MPP_GRP_AU1(_mode) MPP(0, (_mode), 0, 0, 1, 0)
+#define MPP_GRP_NFC(_mode) MPP(0, (_mode), 0, 0, 0, 1)
+
+#define MPP0_GPIO0 MPP_PIN(0, 0x0)
+#define MPP0_UA2_RTSn MPP_PIN(0, 0x2)
+#define MPP0_SDIO0_CD MPP_PIN(0, 0x3)
+#define MPP0_LCD0_PWM MPP_PIN(0, 0xf)
+
+#define MPP1_GPIO1 MPP_PIN(1, 0x0)
+#define MPP1_UA2_CTSn MPP_PIN(1, 0x2)
+#define MPP1_SDIO0_WP MPP_PIN(1, 0x3)
+#define MPP1_LCD1_PWM MPP_PIN(1, 0xf)
+
+#define MPP2_GPIO2 MPP_PIN(2, 0x0)
+#define MPP2_SATA_PRESENT MPP_PIN(2, 0x1)
+#define MPP2_UA2_TXD MPP_PIN(2, 0x2)
+#define MPP2_SDIO0_BUS_POWER MPP_PIN(2, 0x3)
+#define MPP2_UA_RTSn1 MPP_PIN(2, 0x4)
+
+#define MPP3_GPIO3 MPP_PIN(3, 0x0)
+#define MPP3_SATA_ACT MPP_PIN(3, 0x1)
+#define MPP3_UA2_RXD MPP_PIN(3, 0x2)
+#define MPP3_SDIO0_LED_CTRL MPP_PIN(3, 0x3)
+#define MPP3_UA_CTSn1 MPP_PIN(3, 0x4)
+#define MPP3_SPI_LCD_CS1 MPP_PIN(3, 0xf)
+
+#define MPP4_GPIO4 MPP_PIN(4, 0x0)
+#define MPP4_UA3_RTSn MPP_PIN(4, 0x2)
+#define MPP4_SDIO1_CD MPP_PIN(4, 0x3)
+#define MPP4_SPI_1_MISO MPP_PIN(4, 0x4)
+
+#define MPP5_GPIO5 MPP_PIN(5, 0x0)
+#define MPP5_UA3_CTSn MPP_PIN(5, 0x2)
+#define MPP5_SDIO1_WP MPP_PIN(5, 0x3)
+#define MPP5_SPI_1_CS MPP_PIN(5, 0x4)
+
+#define MPP6_GPIO6 MPP_PIN(6, 0x0)
+#define MPP6_UA3_TXD MPP_PIN(6, 0x2)
+#define MPP6_SDIO1_BUS_POWER MPP_PIN(6, 0x3)
+#define MPP6_SPI_1_MOSI MPP_PIN(6, 0x4)
+
+#define MPP7_GPIO7 MPP_PIN(7, 0x0)
+#define MPP7_UA3_RXD MPP_PIN(7, 0x2)
+#define MPP7_SDIO1_LED_CTRL MPP_PIN(7, 0x3)
+#define MPP7_SPI_1_SCK MPP_PIN(7, 0x4)
+
+#define MPP8_GPIO8 MPP_PIN(8, 0x0)
+#define MPP8_WD_RST_OUT MPP_PIN(8, 0x1)
+
+#define MPP9_GPIO9 MPP_PIN(9, 0x0)
+#define MPP9_PEX1_CLKREQn MPP_PIN(9, 0x5)
+
+#define MPP10_GPIO10 MPP_PIN(10, 0x0)
+#define MPP10_SSP_SCLK MPP_PIN(10, 0x5)
+
+#define MPP11_GPIO11 MPP_PIN(11, 0x0)
+#define MPP11_SATA_PRESENT MPP_PIN(11, 0x1)
+#define MPP11_SATA_ACT MPP_PIN(11, 0x2)
+#define MPP11_SDIO0_LED_CTRL MPP_PIN(11, 0x3)
+#define MPP11_SDIO1_LED_CTRL MPP_PIN(11, 0x4)
+#define MPP11_PEX0_CLKREQn MPP_PIN(11, 0x5)
+
+#define MPP12_GPIO12 MPP_PIN(12, 0x0)
+#define MPP12_SATA_ACT MPP_PIN(12, 0x1)
+#define MPP12_UA2_RTSn MPP_PIN(12, 0x2)
+#define MPP12_AD0_I2S_EXT_MCLK MPP_PIN(12, 0x3)
+#define MPP12_SDIO1_CD MPP_PIN(12, 0x4)
+
+#define MPP13_GPIO13 MPP_PIN(13, 0x0)
+#define MPP13_UA2_CTSn MPP_PIN(13, 0x2)
+#define MPP13_AD1_I2S_EXT_MCLK MPP_PIN(13, 0x3)
+#define MPP13_SDIO1WP MPP_PIN(13, 0x4)
+#define MPP13_SSP_EXTCLK MPP_PIN(13, 0x5)
+
+#define MPP14_GPIO14 MPP_PIN(14, 0x0)
+#define MPP14_UA2_TXD MPP_PIN(14, 0x2)
+#define MPP14_SDIO1_BUS_POWER MPP_PIN(14, 0x4)
+#define MPP14_SSP_RXD MPP_PIN(14, 0x5)
+
+#define MPP15_GPIO15 MPP_PIN(15, 0x0)
+#define MPP15_UA2_RXD MPP_PIN(15, 0x2)
+#define MPP15_SDIO1_LED_CTRL MPP_PIN(15, 0x4)
+#define MPP15_SSP_SFRM MPP_PIN(15, 0x5)
+
+#define MPP16_GPIO16 MPP_PIN(16, 0x0)
+#define MPP16_UA3_RTSn MPP_PIN(16, 0x2)
+#define MPP16_SDIO0_CD MPP_PIN(16, 0x3)
+#define MPP16_SPI_LCD_CS1 MPP_PIN(16, 0x4)
+#define MPP16_AC97_SDATA_IN1 MPP_PIN(16, 0x5)
+
+#define MPP17_GPIO17 MPP_PIN(17, 0x0)
+#define MPP17_AC97_SYSCLK_OUT MPP_PIN(17, 0x1)
+#define MPP17_UA3_CTSn MPP_PIN(17, 0x2)
+#define MPP17_SDIO0_WP MPP_PIN(17, 0x3)
+#define MPP17_TW_SDA2 MPP_PIN(17, 0x4)
+#define MPP17_AC97_SDATA_IN2 MPP_PIN(17, 0x5)
+
+#define MPP18_GPIO18 MPP_PIN(18, 0x0)
+#define MPP18_UA3_TXD MPP_PIN(18, 0x2)
+#define MPP18_SDIO0_BUS_POWER MPP_PIN(18, 0x3)
+#define MPP18_LCD0_PWM MPP_PIN(18, 0x4)
+#define MPP18_AC_SDATA_IN3 MPP_PIN(18, 0x5)
+
+#define MPP19_GPIO19 MPP_PIN(19, 0x0)
+#define MPP19_UA3_RXD MPP_PIN(19, 0x2)
+#define MPP19_SDIO0_LED_CTRL MPP_PIN(19, 0x3)
+#define MPP19_TW_SCK2 MPP_PIN(19, 0x4)
+
+#define MPP20_GPIO20 MPP_PIN(20, 0x0)
+#define MPP20_AC97_SYSCLK_OUT MPP_PIN(20, 0x1)
+#define MPP20_SPI_LCD_MISO MPP_PIN(20, 0x2)
+#define MPP20_SDIO1_CD MPP_PIN(20, 0x3)
+#define MPP20_SDIO0_CD MPP_PIN(20, 0x5)
+#define MPP20_SPI_1_MISO MPP_PIN(20, 0x6)
+
+#define MPP21_GPIO21 MPP_PIN(21, 0x0)
+#define MPP21_UA1_RTSn MPP_PIN(21, 0x1)
+#define MPP21_SPI_LCD_CS0 MPP_PIN(21, 0x2)
+#define MPP21_SDIO1_WP MPP_PIN(21, 0x3)
+#define MPP21_SSP_SFRM MPP_PIN(21, 0x4)
+#define MPP21_SDIO0_WP MPP_PIN(21, 0x5)
+#define MPP21_SPI_1_CS MPP_PIN(21, 0x6)
+
+#define MPP22_GPIO22 MPP_PIN(22, 0x0)
+#define MPP22_UA1_CTSn MPP_PIN(22, 0x1)
+#define MPP22_SPI_LCD_MOSI MPP_PIN(22, 0x2)
+#define MPP22_SDIO1_BUS_POWER MPP_PIN(22, 0x3)
+#define MPP22_SSP_TXD MPP_PIN(22, 0x4)
+#define MPP22_SDIO0_BUS_POWER MPP_PIN(22, 0x5)
+#define MPP22_SPI_1_MOSI MPP_PIN(22, 0x6)
+
+#define MPP23_GPIO23 MPP_PIN(23, 0x0)
+#define MPP23_SPI_LCD_SCK MPP_PIN(23, 0x2)
+#define MPP23_SDIO1_LED_CTRL MPP_PIN(23, 0x3)
+#define MPP23_SSP_SCLK MPP_PIN(23, 0x4)
+#define MPP23_SDIO0_LED_CTRL MPP_PIN(23, 0x5)
+#define MPP23_SPI_1_SCK MPP_PIN(23, 0x6)
+
+/* for MPP groups _num is a group index */
+enum dove_mpp_grp_idx {
+ MPP_24_39 = 2,
+ MPP_40_45 = 0,
+ MPP_46_51 = 1,
+ MPP_58_61 = 5,
+ MPP_62_63 = 4,
+};
+
+#define MPP24_39_GPIO MPP_GRP(MPP_24_39, 0x1)
+#define MPP24_39_CAM MPP_GRP(MPP_24_39, 0x0)
+
+#define MPP40_45_GPIO MPP_GRP(MPP_40_45, 0x1)
+#define MPP40_45_SD0 MPP_GRP(MPP_40_45, 0x0)
+
+#define MPP46_51_GPIO MPP_GRP(MPP_46_51, 0x1)
+#define MPP46_51_SD1 MPP_GRP(MPP_46_51, 0x0)
+
+#define MPP58_61_GPIO MPP_GRP(MPP_58_61, 0x1)
+#define MPP58_61_SPI MPP_GRP(MPP_58_61, 0x0)
+
+#define MPP62_63_GPIO MPP_GRP(MPP_62_63, 0x1)
+#define MPP62_63_UA1 MPP_GRP(MPP_62_63, 0x0)
+
+/* The MPP[64:71] control differs from other groups */
+#define MPP64_71_GPO MPP_GRP_NFC(0x1)
+#define MPP64_71_NFC MPP_GRP_NFC(0x0)
+
+/*
+ * The MPP[52:57] functionality is encoded by 4 bits in different
+ * registers. The _num field in this case encodes those bits in
+ * correspodence with Table 135 of 88AP510 Functional specification
+ */
+#define MPP52_57_AU1 MPP_GRP_AU1(0x0)
+#define MPP52_57_AU1_GPIO57 MPP_GRP_AU1(0x2)
+#define MPP52_57_GPIO MPP_GRP_AU1(0xa)
+#define MPP52_57_TW_GPIO MPP_GRP_AU1(0xb)
+#define MPP52_57_AU1_SSP MPP_GRP_AU1(0xc)
+#define MPP52_57_SSP_GPIO MPP_GRP_AU1(0xe)
+#define MPP52_57_SSP_TW MPP_GRP_AU1(0xf)
+
+void dove_mpp_conf(unsigned int *mpp_list);
+
+#endif /* __ARCH_DOVE_MPP_CODED_H */
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 3410633..7fc603b 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -45,18 +45,18 @@
Marvell GuruPlug Reference Board.
config MACH_TS219
- bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
+ bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
Say 'Y' here if you want your kernel to support the
- QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS
- devices.
+ QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
+ TS-219P+ Turbo NAS devices.
config MACH_TS41X
- bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS"
+ bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
help
Say 'Y' here if you want your kernel to support the
- QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
- devices.
+ QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
+ NAS devices.
config MACH_DOCKSTAR
bool "Seagate FreeAgent DockStar"
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 6710bd7..dc999c4 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -80,15 +80,19 @@
MPP11_UART0_RXD,
MPP13_UART1_TXD, /* PIC controller */
MPP14_UART1_RXD, /* PIC controller */
- MPP15_GPIO, /* USB Copy button */
- MPP16_GPIO, /* Reset button */
+ MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */
+ MPP16_GPIO, /* Reset button (on devices with 88F6281) */
MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
+ MPP37_GPIO, /* Reset button (on devices with 88F6282) */
+ MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */
MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */
0
};
static void __init qnap_ts219_init(void)
{
+ u32 dev, rev;
+
/*
* Basic setup. Needs to be called early.
*/
@@ -100,6 +104,14 @@
qnap_tsx1x_register_flash();
kirkwood_i2c_init();
i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (dev == MV88F6282_DEV_ID) {
+ qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */
+ qnap_ts219_buttons[1].gpio = 37; /* Reset button */
+ qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+ }
+
kirkwood_ge00_init(&qnap_ts219_ge00_data);
kirkwood_sata_init(&qnap_ts219_sata_data);
kirkwood_ehci_init();
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 3587a28..9a44029 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -119,6 +119,8 @@
static void __init qnap_ts41x_init(void)
{
+ u32 dev, rev;
+
/*
* Basic setup. Needs to be called early.
*/
@@ -130,8 +132,15 @@
qnap_tsx1x_register_flash();
kirkwood_i2c_init();
i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (dev == MV88F6282_DEV_ID) {
+ qnap_ts41x_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+ qnap_ts41x_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
+ }
kirkwood_ge00_init(&qnap_ts41x_ge00_data);
kirkwood_ge01_init(&qnap_ts41x_ge01_data);
+
kirkwood_sata_init(&qnap_ts41x_sata_data);
kirkwood_ehci_init();
platform_device_register(&qnap_ts41x_button_device);
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 0711d3b..67793a6 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -37,25 +37,38 @@
Say 'Y' here if you want to support the Marvell PXA910-based
TTC_DKB Development Board.
+config MACH_BROWNSTONE
+ bool "Marvell's Brownstone Development Platform"
+ depends on !CPU_MOHAWK
+ select CPU_MMP2
+ help
+ Say 'Y' here if you want to support the Marvell MMP2-based
+ Brown Development Platform.
+ MMP2-based board can't be co-existed with PXA168-based &
+ PXA910-based development board. Since MMP2 is compatible to
+ ARMv7 architecture.
+
config MACH_FLINT
bool "Marvell's Flint Development Platform"
+ depends on !CPU_MOHAWK
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-based
Flint Development Platform.
MMP2-based board can't be co-existed with PXA168-based &
PXA910-based development board. Since MMP2 is compatible to
- ARMv6 architecture.
+ ARMv7 architecture.
config MACH_MARVELL_JASPER
bool "Marvell's Jasper Development Platform"
+ depends on !CPU_MOHAWK
select CPU_MMP2
help
Say 'Y' here if you want to support the Marvell MMP2-base
Jasper Development Platform.
MMP2-based board can't be co-existed with PXA168-based &
PXA910-based development board. Since MMP2 is compatible to
- ARMv6 architecture.
+ ARMv7 architecture.
config MACH_TETON_BGA
bool "Marvell's PXA168 Teton BGA Development Board"
@@ -80,8 +93,7 @@
config CPU_MMP2
bool
- select CPU_V6
- select CPU_32v6K
+ select CPU_PJ4
help
- Select code specific to MMP2. MMP2 is ARMv6 compatible.
+ Select code specific to MMP2. MMP2 is ARMv7 compatible.
endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 751cdbf..5c68382 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -15,6 +15,7 @@
obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o
+obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o
obj-$(CONFIG_MACH_FLINT) += flint.o
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
new file mode 100644
index 0000000..7bb78fd
--- /dev/null
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -0,0 +1,204 @@
+/*
+ * linux/arch/arm/mach-mmp/brownstone.c
+ *
+ * Support for the Marvell Brownstone Development Platform.
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/max8649.h>
+#include <linux/regulator/fixed.h>
+#include <linux/mfd/max8925.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+#define BROWNSTONE_NR_IRQS (IRQ_BOARD_START + 40)
+
+#define GPIO_5V_ENABLE (89)
+
+static unsigned long brownstone_pin_config[] __initdata = {
+ /* UART1 */
+ GPIO29_UART1_RXD,
+ GPIO30_UART1_TXD,
+
+ /* UART3 */
+ GPIO51_UART3_RXD,
+ GPIO52_UART3_TXD,
+
+ /* DFI */
+ GPIO168_DFI_D0,
+ GPIO167_DFI_D1,
+ GPIO166_DFI_D2,
+ GPIO165_DFI_D3,
+ GPIO107_DFI_D4,
+ GPIO106_DFI_D5,
+ GPIO105_DFI_D6,
+ GPIO104_DFI_D7,
+ GPIO111_DFI_D8,
+ GPIO164_DFI_D9,
+ GPIO163_DFI_D10,
+ GPIO162_DFI_D11,
+ GPIO161_DFI_D12,
+ GPIO110_DFI_D13,
+ GPIO109_DFI_D14,
+ GPIO108_DFI_D15,
+ GPIO143_ND_nCS0,
+ GPIO144_ND_nCS1,
+ GPIO147_ND_nWE,
+ GPIO148_ND_nRE,
+ GPIO150_ND_ALE,
+ GPIO149_ND_CLE,
+ GPIO112_ND_RDY0,
+ GPIO160_ND_RDY1,
+
+ /* PMIC */
+ PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
+
+ /* MMC0 */
+ GPIO131_MMC1_DAT3 | MFP_PULL_HIGH,
+ GPIO132_MMC1_DAT2 | MFP_PULL_HIGH,
+ GPIO133_MMC1_DAT1 | MFP_PULL_HIGH,
+ GPIO134_MMC1_DAT0 | MFP_PULL_HIGH,
+ GPIO136_MMC1_CMD | MFP_PULL_HIGH,
+ GPIO139_MMC1_CLK,
+ GPIO140_MMC1_CD | MFP_PULL_LOW,
+ GPIO141_MMC1_WP | MFP_PULL_LOW,
+
+ /* MMC1 */
+ GPIO37_MMC2_DAT3 | MFP_PULL_HIGH,
+ GPIO38_MMC2_DAT2 | MFP_PULL_HIGH,
+ GPIO39_MMC2_DAT1 | MFP_PULL_HIGH,
+ GPIO40_MMC2_DAT0 | MFP_PULL_HIGH,
+ GPIO41_MMC2_CMD | MFP_PULL_HIGH,
+ GPIO42_MMC2_CLK,
+
+ /* MMC2 */
+ GPIO165_MMC3_DAT7 | MFP_PULL_HIGH,
+ GPIO162_MMC3_DAT6 | MFP_PULL_HIGH,
+ GPIO166_MMC3_DAT5 | MFP_PULL_HIGH,
+ GPIO163_MMC3_DAT4 | MFP_PULL_HIGH,
+ GPIO167_MMC3_DAT3 | MFP_PULL_HIGH,
+ GPIO164_MMC3_DAT2 | MFP_PULL_HIGH,
+ GPIO168_MMC3_DAT1 | MFP_PULL_HIGH,
+ GPIO111_MMC3_DAT0 | MFP_PULL_HIGH,
+ GPIO112_MMC3_CMD | MFP_PULL_HIGH,
+ GPIO151_MMC3_CLK,
+
+ /* 5V regulator */
+ GPIO89_GPIO,
+};
+
+static struct regulator_consumer_supply max8649_supply[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data max8649_init_data = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 1150000,
+ .max_uV = 1280000,
+ .always_on = 1,
+ .boot_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8649_supply[0],
+};
+
+static struct max8649_platform_data brownstone_max8649_info = {
+ .mode = 2, /* VID1 = 1, VID0 = 0 */
+ .extclk = 0,
+ .ramp_timing = MAX8649_RAMP_32MV,
+ .regulator = &max8649_init_data,
+};
+
+static struct regulator_consumer_supply brownstone_v_5vp_supplies[] = {
+ REGULATOR_SUPPLY("v_5vp", NULL),
+};
+
+static struct regulator_init_data brownstone_v_5vp_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(brownstone_v_5vp_supplies),
+ .consumer_supplies = brownstone_v_5vp_supplies,
+};
+
+static struct fixed_voltage_config brownstone_v_5vp = {
+ .supply_name = "v_5vp",
+ .microvolts = 5000000,
+ .gpio = GPIO_5V_ENABLE,
+ .enable_high = 1,
+ .enabled_at_boot = 1,
+ .init_data = &brownstone_v_5vp_data,
+};
+
+static struct platform_device brownstone_v_5vp_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &brownstone_v_5vp,
+ },
+};
+
+static struct max8925_platform_data brownstone_max8925_info = {
+ .irq_base = IRQ_BOARD_START,
+};
+
+static struct i2c_board_info brownstone_twsi1_info[] = {
+ [0] = {
+ .type = "max8649",
+ .addr = 0x60,
+ .platform_data = &brownstone_max8649_info,
+ },
+ [1] = {
+ .type = "max8925",
+ .addr = 0x3c,
+ .irq = IRQ_MMP2_PMIC,
+ .platform_data = &brownstone_max8925_info,
+ },
+};
+
+static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
+ .max_speed = 25000000,
+};
+
+static void __init brownstone_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
+
+ /* on-chip devices */
+ mmp2_add_uart(1);
+ mmp2_add_uart(3);
+ mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
+ mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
+
+ /* enable 5v regulator */
+ platform_device_register(&brownstone_v_5vp_device);
+}
+
+MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
+ /* Maintainer: Haojian Zhuang <haojian.zhuang@marvell.com> */
+ .map_io = mmp_map_io,
+ .nr_irqs = BROWNSTONE_NR_IRQS,
+ .init_irq = mmp2_init_irq,
+ .timer = &mmp2_timer,
+ .init_machine = brownstone_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index bdeb6db..c4fd806 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -47,7 +47,7 @@
GPIO113_SMC_RDY,
/*Ethernet*/
- GPIO155_GPIO155,
+ GPIO155_GPIO,
/* DFI */
GPIO168_DFI_D0,
diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
index 761c2da..117e303 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
@@ -9,175 +9,175 @@
#define MFP_DRIVE_FAST (0x8 << 13)
/* GPIO */
-#define GPIO0_GPIO0 MFP_CFG(GPIO0, AF0)
-#define GPIO1_GPIO1 MFP_CFG(GPIO1, AF0)
-#define GPIO2_GPIO2 MFP_CFG(GPIO2, AF0)
-#define GPIO3_GPIO3 MFP_CFG(GPIO3, AF0)
-#define GPIO4_GPIO4 MFP_CFG(GPIO4, AF0)
-#define GPIO5_GPIO5 MFP_CFG(GPIO5, AF0)
-#define GPIO6_GPIO6 MFP_CFG(GPIO6, AF0)
-#define GPIO7_GPIO7 MFP_CFG(GPIO7, AF0)
-#define GPIO8_GPIO8 MFP_CFG(GPIO8, AF0)
-#define GPIO9_GPIO9 MFP_CFG(GPIO9, AF0)
-#define GPIO10_GPIO10 MFP_CFG(GPIO10, AF0)
-#define GPIO11_GPIO11 MFP_CFG(GPIO11, AF0)
-#define GPIO12_GPIO12 MFP_CFG(GPIO12, AF0)
-#define GPIO13_GPIO13 MFP_CFG(GPIO13, AF0)
-#define GPIO14_GPIO14 MFP_CFG(GPIO14, AF0)
-#define GPIO15_GPIO15 MFP_CFG(GPIO15, AF0)
-#define GPIO16_GPIO16 MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO17 MFP_CFG(GPIO17, AF0)
-#define GPIO18_GPIO18 MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO19 MFP_CFG(GPIO19, AF0)
-#define GPIO20_GPIO20 MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO21 MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO22 MFP_CFG(GPIO22, AF0)
-#define GPIO23_GPIO23 MFP_CFG(GPIO23, AF0)
-#define GPIO24_GPIO24 MFP_CFG(GPIO24, AF0)
-#define GPIO25_GPIO25 MFP_CFG(GPIO25, AF0)
-#define GPIO26_GPIO26 MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO27 MFP_CFG(GPIO27, AF0)
-#define GPIO28_GPIO28 MFP_CFG(GPIO28, AF0)
-#define GPIO29_GPIO29 MFP_CFG(GPIO29, AF0)
-#define GPIO30_GPIO30 MFP_CFG(GPIO30, AF0)
-#define GPIO31_GPIO31 MFP_CFG(GPIO31, AF0)
-#define GPIO32_GPIO32 MFP_CFG(GPIO32, AF0)
-#define GPIO33_GPIO33 MFP_CFG(GPIO33, AF0)
-#define GPIO34_GPIO34 MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO35 MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO36 MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO37 MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO38 MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO39 MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO40 MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO41 MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO42 MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO43 MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO44 MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO45 MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO46 MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO47 MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO48 MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO49 MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO50 MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO51 MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO52 MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO53 MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO54 MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO55 MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO56 MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO57 MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO58 MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO59 MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO60 MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO61 MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO62 MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO63 MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO64 MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO65 MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO66 MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO67 MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO68 MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO69 MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO70 MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO71 MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO72 MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO73 MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO74 MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO75 MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO76 MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO77 MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO78 MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO79 MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO80 MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO81 MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO82 MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO83 MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO84 MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO85 MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO86 MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO87 MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO88 MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO89 MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO90 MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO91 MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO92 MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO93 MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO94 MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO95 MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO96 MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO97 MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO98 MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO99 MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO100 MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO101 MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO102 MFP_CFG(GPIO102, AF1)
-#define GPIO103_GPIO103 MFP_CFG(GPIO103, AF1)
-#define GPIO104_GPIO104 MFP_CFG(GPIO104, AF1)
-#define GPIO105_GPIO105 MFP_CFG(GPIO105, AF1)
-#define GPIO106_GPIO106 MFP_CFG(GPIO106, AF1)
-#define GPIO107_GPIO107 MFP_CFG(GPIO107, AF1)
-#define GPIO108_GPIO108 MFP_CFG(GPIO108, AF1)
-#define GPIO109_GPIO109 MFP_CFG(GPIO109, AF1)
-#define GPIO110_GPIO110 MFP_CFG(GPIO110, AF1)
-#define GPIO111_GPIO111 MFP_CFG(GPIO111, AF1)
-#define GPIO112_GPIO112 MFP_CFG(GPIO112, AF1)
-#define GPIO113_GPIO113 MFP_CFG(GPIO113, AF1)
-#define GPIO114_GPIO114 MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO115 MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO116 MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO117 MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO118 MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO119 MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO120 MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO121 MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO122 MFP_CFG(GPIO122, AF0)
-#define GPIO123_GPIO123 MFP_CFG(GPIO123, AF0)
-#define GPIO124_GPIO124 MFP_CFG(GPIO124, AF0)
-#define GPIO125_GPIO125 MFP_CFG(GPIO125, AF0)
-#define GPIO126_GPIO126 MFP_CFG(GPIO126, AF0)
-#define GPIO127_GPIO127 MFP_CFG(GPIO127, AF0)
-#define GPIO128_GPIO128 MFP_CFG(GPIO128, AF0)
-#define GPIO129_GPIO129 MFP_CFG(GPIO129, AF0)
-#define GPIO130_GPIO130 MFP_CFG(GPIO130, AF0)
-#define GPIO131_GPIO131 MFP_CFG(GPIO131, AF0)
-#define GPIO132_GPIO132 MFP_CFG(GPIO132, AF0)
-#define GPIO133_GPIO133 MFP_CFG(GPIO133, AF0)
-#define GPIO134_GPIO134 MFP_CFG(GPIO134, AF0)
-#define GPIO135_GPIO135 MFP_CFG(GPIO135, AF0)
-#define GPIO136_GPIO136 MFP_CFG(GPIO136, AF0)
-#define GPIO137_GPIO137 MFP_CFG(GPIO137, AF0)
-#define GPIO138_GPIO138 MFP_CFG(GPIO138, AF0)
-#define GPIO139_GPIO139 MFP_CFG(GPIO139, AF0)
-#define GPIO140_GPIO140 MFP_CFG(GPIO140, AF0)
-#define GPIO141_GPIO141 MFP_CFG(GPIO141, AF0)
-#define GPIO142_GPIO142 MFP_CFG(GPIO142, AF1)
-#define GPIO143_GPIO143 MFP_CFG(GPIO143, AF1)
-#define GPIO144_GPIO144 MFP_CFG(GPIO144, AF1)
-#define GPIO145_GPIO145 MFP_CFG(GPIO145, AF1)
-#define GPIO146_GPIO146 MFP_CFG(GPIO146, AF1)
-#define GPIO147_GPIO147 MFP_CFG(GPIO147, AF1)
-#define GPIO148_GPIO148 MFP_CFG(GPIO148, AF1)
-#define GPIO149_GPIO149 MFP_CFG(GPIO149, AF1)
-#define GPIO150_GPIO150 MFP_CFG(GPIO150, AF1)
-#define GPIO151_GPIO151 MFP_CFG(GPIO151, AF1)
-#define GPIO152_GPIO152 MFP_CFG(GPIO152, AF1)
-#define GPIO153_GPIO153 MFP_CFG(GPIO153, AF1)
-#define GPIO154_GPIO154 MFP_CFG(GPIO154, AF1)
-#define GPIO155_GPIO155 MFP_CFG(GPIO155, AF1)
-#define GPIO156_GPIO156 MFP_CFG(GPIO156, AF1)
-#define GPIO157_GPIO157 MFP_CFG(GPIO157, AF1)
-#define GPIO158_GPIO158 MFP_CFG(GPIO158, AF1)
-#define GPIO159_GPIO159 MFP_CFG(GPIO159, AF1)
-#define GPIO160_GPIO160 MFP_CFG(GPIO160, AF1)
-#define GPIO161_GPIO161 MFP_CFG(GPIO161, AF1)
-#define GPIO162_GPIO162 MFP_CFG(GPIO162, AF1)
-#define GPIO163_GPIO163 MFP_CFG(GPIO163, AF1)
-#define GPIO164_GPIO164 MFP_CFG(GPIO164, AF1)
-#define GPIO165_GPIO165 MFP_CFG(GPIO165, AF1)
-#define GPIO166_GPIO166 MFP_CFG(GPIO166, AF1)
-#define GPIO167_GPIO167 MFP_CFG(GPIO167, AF1)
-#define GPIO168_GPIO168 MFP_CFG(GPIO168, AF1)
+#define GPIO0_GPIO MFP_CFG(GPIO0, AF0)
+#define GPIO1_GPIO MFP_CFG(GPIO1, AF0)
+#define GPIO2_GPIO MFP_CFG(GPIO2, AF0)
+#define GPIO3_GPIO MFP_CFG(GPIO3, AF0)
+#define GPIO4_GPIO MFP_CFG(GPIO4, AF0)
+#define GPIO5_GPIO MFP_CFG(GPIO5, AF0)
+#define GPIO6_GPIO MFP_CFG(GPIO6, AF0)
+#define GPIO7_GPIO MFP_CFG(GPIO7, AF0)
+#define GPIO8_GPIO MFP_CFG(GPIO8, AF0)
+#define GPIO9_GPIO MFP_CFG(GPIO9, AF0)
+#define GPIO10_GPIO MFP_CFG(GPIO10, AF0)
+#define GPIO11_GPIO MFP_CFG(GPIO11, AF0)
+#define GPIO12_GPIO MFP_CFG(GPIO12, AF0)
+#define GPIO13_GPIO MFP_CFG(GPIO13, AF0)
+#define GPIO14_GPIO MFP_CFG(GPIO14, AF0)
+#define GPIO15_GPIO MFP_CFG(GPIO15, AF0)
+#define GPIO16_GPIO MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO MFP_CFG(GPIO17, AF0)
+#define GPIO18_GPIO MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO MFP_CFG(GPIO19, AF0)
+#define GPIO20_GPIO MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO MFP_CFG(GPIO22, AF0)
+#define GPIO23_GPIO MFP_CFG(GPIO23, AF0)
+#define GPIO24_GPIO MFP_CFG(GPIO24, AF0)
+#define GPIO25_GPIO MFP_CFG(GPIO25, AF0)
+#define GPIO26_GPIO MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO MFP_CFG(GPIO27, AF0)
+#define GPIO28_GPIO MFP_CFG(GPIO28, AF0)
+#define GPIO29_GPIO MFP_CFG(GPIO29, AF0)
+#define GPIO30_GPIO MFP_CFG(GPIO30, AF0)
+#define GPIO31_GPIO MFP_CFG(GPIO31, AF0)
+#define GPIO32_GPIO MFP_CFG(GPIO32, AF0)
+#define GPIO33_GPIO MFP_CFG(GPIO33, AF0)
+#define GPIO34_GPIO MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO MFP_CFG(GPIO45, AF0)
+#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
+#define GPIO47_GPIO MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO MFP_CFG(GPIO48, AF0)
+#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO MFP_CFG(GPIO52, AF0)
+#define GPIO53_GPIO MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO MFP_CFG(GPIO55, AF0)
+#define GPIO56_GPIO MFP_CFG(GPIO56, AF0)
+#define GPIO57_GPIO MFP_CFG(GPIO57, AF0)
+#define GPIO58_GPIO MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO MFP_CFG(GPIO62, AF0)
+#define GPIO63_GPIO MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO MFP_CFG(GPIO102, AF1)
+#define GPIO103_GPIO MFP_CFG(GPIO103, AF1)
+#define GPIO104_GPIO MFP_CFG(GPIO104, AF1)
+#define GPIO105_GPIO MFP_CFG(GPIO105, AF1)
+#define GPIO106_GPIO MFP_CFG(GPIO106, AF1)
+#define GPIO107_GPIO MFP_CFG(GPIO107, AF1)
+#define GPIO108_GPIO MFP_CFG(GPIO108, AF1)
+#define GPIO109_GPIO MFP_CFG(GPIO109, AF1)
+#define GPIO110_GPIO MFP_CFG(GPIO110, AF1)
+#define GPIO111_GPIO MFP_CFG(GPIO111, AF1)
+#define GPIO112_GPIO MFP_CFG(GPIO112, AF1)
+#define GPIO113_GPIO MFP_CFG(GPIO113, AF1)
+#define GPIO114_GPIO MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO MFP_CFG(GPIO122, AF0)
+#define GPIO123_GPIO MFP_CFG(GPIO123, AF0)
+#define GPIO124_GPIO MFP_CFG(GPIO124, AF0)
+#define GPIO125_GPIO MFP_CFG(GPIO125, AF0)
+#define GPIO126_GPIO MFP_CFG(GPIO126, AF0)
+#define GPIO127_GPIO MFP_CFG(GPIO127, AF0)
+#define GPIO128_GPIO MFP_CFG(GPIO128, AF0)
+#define GPIO129_GPIO MFP_CFG(GPIO129, AF0)
+#define GPIO130_GPIO MFP_CFG(GPIO130, AF0)
+#define GPIO131_GPIO MFP_CFG(GPIO131, AF0)
+#define GPIO132_GPIO MFP_CFG(GPIO132, AF0)
+#define GPIO133_GPIO MFP_CFG(GPIO133, AF0)
+#define GPIO134_GPIO MFP_CFG(GPIO134, AF0)
+#define GPIO135_GPIO MFP_CFG(GPIO135, AF0)
+#define GPIO136_GPIO MFP_CFG(GPIO136, AF0)
+#define GPIO137_GPIO MFP_CFG(GPIO137, AF0)
+#define GPIO138_GPIO MFP_CFG(GPIO138, AF0)
+#define GPIO139_GPIO MFP_CFG(GPIO139, AF0)
+#define GPIO140_GPIO MFP_CFG(GPIO140, AF0)
+#define GPIO141_GPIO MFP_CFG(GPIO141, AF0)
+#define GPIO142_GPIO MFP_CFG(GPIO142, AF1)
+#define GPIO143_GPIO MFP_CFG(GPIO143, AF1)
+#define GPIO144_GPIO MFP_CFG(GPIO144, AF1)
+#define GPIO145_GPIO MFP_CFG(GPIO145, AF1)
+#define GPIO146_GPIO MFP_CFG(GPIO146, AF1)
+#define GPIO147_GPIO MFP_CFG(GPIO147, AF1)
+#define GPIO148_GPIO MFP_CFG(GPIO148, AF1)
+#define GPIO149_GPIO MFP_CFG(GPIO149, AF1)
+#define GPIO150_GPIO MFP_CFG(GPIO150, AF1)
+#define GPIO151_GPIO MFP_CFG(GPIO151, AF1)
+#define GPIO152_GPIO MFP_CFG(GPIO152, AF1)
+#define GPIO153_GPIO MFP_CFG(GPIO153, AF1)
+#define GPIO154_GPIO MFP_CFG(GPIO154, AF1)
+#define GPIO155_GPIO MFP_CFG(GPIO155, AF1)
+#define GPIO156_GPIO MFP_CFG(GPIO156, AF1)
+#define GPIO157_GPIO MFP_CFG(GPIO157, AF1)
+#define GPIO158_GPIO MFP_CFG(GPIO158, AF1)
+#define GPIO159_GPIO MFP_CFG(GPIO159, AF1)
+#define GPIO160_GPIO MFP_CFG(GPIO160, AF1)
+#define GPIO161_GPIO MFP_CFG(GPIO161, AF1)
+#define GPIO162_GPIO MFP_CFG(GPIO162, AF1)
+#define GPIO163_GPIO MFP_CFG(GPIO163, AF1)
+#define GPIO164_GPIO MFP_CFG(GPIO164, AF1)
+#define GPIO165_GPIO MFP_CFG(GPIO165, AF1)
+#define GPIO166_GPIO MFP_CFG(GPIO166, AF1)
+#define GPIO167_GPIO MFP_CFG(GPIO167, AF1)
+#define GPIO168_GPIO MFP_CFG(GPIO168, AF1)
/* DFI */
#define GPIO108_DFI_D15 MFP_CFG(GPIO108, AF0)
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index dbba6e8..4aec493 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -1,6 +1,8 @@
#ifndef __ASM_MACH_MMP2_H
#define __ASM_MACH_MMP2_H
+#include <plat/sdhci.h>
+
struct sys_timer;
extern struct sys_timer mmp2_timer;
@@ -22,6 +24,10 @@
extern struct pxa_device_desc mmp2_device_twsi4;
extern struct pxa_device_desc mmp2_device_twsi5;
extern struct pxa_device_desc mmp2_device_twsi6;
+extern struct pxa_device_desc mmp2_device_sdh0;
+extern struct pxa_device_desc mmp2_device_sdh1;
+extern struct pxa_device_desc mmp2_device_sdh2;
+extern struct pxa_device_desc mmp2_device_sdh3;
static inline int mmp2_add_uart(int id)
{
@@ -63,5 +69,21 @@
return pxa_register_device(d, data, sizeof(*data));
}
+static inline int mmp2_add_sdhost(int id, struct sdhci_pxa_platdata *data)
+{
+ struct pxa_device_desc *d = NULL;
+
+ switch (id) {
+ case 0: d = &mmp2_device_sdh0; break;
+ case 1: d = &mmp2_device_sdh1; break;
+ case 2: d = &mmp2_device_sdh2; break;
+ case 3: d = &mmp2_device_sdh3; break;
+ default:
+ return -EINVAL;
+ }
+
+ return pxa_register_device(d, data, sizeof(*data));
+}
+
#endif /* __ASM_MACH_MMP2_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
index ac47023..f7011ef 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -27,6 +27,8 @@
#define APMU_DMA APMU_REG(0x064)
#define APMU_GEU APMU_REG(0x068)
#define APMU_BUS APMU_REG(0x06c)
+#define APMU_SDH2 APMU_REG(0x0e8)
+#define APMU_SDH3 APMU_REG(0x0ec)
#define APMU_FNCLK_EN (1 << 4)
#define APMU_AXICLK_EN (1 << 3)
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 2a684fa..24172a0 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -67,6 +67,36 @@
/* PMIC */
PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
+
+ /* MMC1 */
+ GPIO131_MMC1_DAT3,
+ GPIO132_MMC1_DAT2,
+ GPIO133_MMC1_DAT1,
+ GPIO134_MMC1_DAT0,
+ GPIO136_MMC1_CMD,
+ GPIO139_MMC1_CLK,
+ GPIO140_MMC1_CD,
+ GPIO141_MMC1_WP,
+
+ /* MMC2 */
+ GPIO37_MMC2_DAT3,
+ GPIO38_MMC2_DAT2,
+ GPIO39_MMC2_DAT1,
+ GPIO40_MMC2_DAT0,
+ GPIO41_MMC2_CMD,
+ GPIO42_MMC2_CLK,
+
+ /* MMC3 */
+ GPIO165_MMC3_DAT7,
+ GPIO162_MMC3_DAT6,
+ GPIO166_MMC3_DAT5,
+ GPIO163_MMC3_DAT4,
+ GPIO167_MMC3_DAT3,
+ GPIO164_MMC3_DAT2,
+ GPIO168_MMC3_DAT1,
+ GPIO111_MMC3_DAT0,
+ GPIO112_MMC3_CMD,
+ GPIO151_MMC3_CLK,
};
static struct regulator_consumer_supply max8649_supply[] = {
@@ -123,6 +153,10 @@
},
};
+static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
+ .max_speed = 25000000,
+};
+
static void __init jasper_init(void)
{
mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
@@ -131,6 +165,7 @@
mmp2_add_uart(1);
mmp2_add_uart(3);
mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
+ mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
regulator_has_full_constraints();
}
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index daf3993..8e6c3ac 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -115,6 +115,29 @@
mmp2_init_gpio();
}
+static void sdhc_clk_enable(struct clk *clk)
+{
+ uint32_t clk_rst;
+
+ clk_rst = __raw_readl(clk->clk_rst);
+ clk_rst |= clk->enable_val;
+ __raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void sdhc_clk_disable(struct clk *clk)
+{
+ uint32_t clk_rst;
+
+ clk_rst = __raw_readl(clk->clk_rst);
+ clk_rst &= ~clk->enable_val;
+ __raw_writel(clk_rst, clk->clk_rst);
+}
+
+struct clkops sdhc_clk_ops = {
+ .enable = sdhc_clk_enable,
+ .disable = sdhc_clk_disable,
+};
+
/* APB peripheral clocks */
static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
@@ -126,9 +149,12 @@
static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
static APMU_CLK(nand, NAND, 0xbf, 100000000);
+static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
static struct clk_lookup mmp2_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -142,6 +168,10 @@
INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_sdh0, "sdhci-pxa.0", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh1, "sdhci-pxa.1", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh2, "sdhci-pxa.2", "PXA-SDHCLK"),
+ INIT_CLKREG(&clk_sdh3, "sdhci-pxa.3", "PXA-SDHCLK"),
};
static int __init mmp2_init(void)
@@ -192,4 +222,8 @@
MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);
+MMP2_DEVICE(sdh0, "sdhci-pxa", 0, MMC, 0xd4280000, 0x120);
+MMP2_DEVICE(sdh1, "sdhci-pxa", 1, MMC2, 0xd4280800, 0x120);
+MMP2_DEVICE(sdh2, "sdhci-pxa", 2, MMC3, 0xd4281000, 0x120);
+MMP2_DEVICE(sdh3, "sdhci-pxa", 3, MMC4, 0xd4281800, 0x120);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 46f2d69..8f92ccd 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -111,6 +111,7 @@
static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(u2o, USB, 0x1b, 480000000);
/* device and clock bindings */
static struct clk_lookup pxa910_clkregs[] = {
@@ -123,6 +124,7 @@
INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
};
static int __init pxa910_init(void)
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index dbbcfeb..31e5fd6 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -49,6 +49,8 @@
config MSM_SOC_REV_A
bool
+config ARCH_MSM_SCORPIONMP
+ bool
config ARCH_MSM_ARM11
bool
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 788bdac..3eff399 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -65,7 +65,7 @@
*/
#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000)
#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500)
-#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1700)
+#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1570)
#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000)
#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000)
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 86c9b21..9db9203 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -216,7 +216,7 @@
{
.name = "wl1271",
.mmc = 3,
- .caps = MMC_CAP_4_BIT_DATA,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
.nonremovable = true,
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 40562dd..a1939b1 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -297,7 +297,7 @@
return 0;
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
- if (!dpll3_m2_ck)
+ if (IS_ERR(dpll3_m2_ck))
return -EINVAL;
rate = clk_get_rate(dpll3_m2_ck);
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 5e81517..a8afb61 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -161,6 +161,23 @@
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
}
+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+ u32 tick_rate, cycles;
+
+ if (!seconds && !milliseconds)
+ return;
+
+ tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+ cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+ omap_dm_timer_stop(gptimer_wakeup);
+ omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+ pr_info("PM: Resume timer in %u.%03u secs"
+ " (%d ticks at %d ticks/sec.)\n",
+ seconds, milliseconds, cycles, tick_rate);
+}
+
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
@@ -354,23 +371,6 @@
pwrdm->timer = t;
}
-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
- u32 tick_rate, cycles;
-
- if (!seconds && !milliseconds)
- return;
-
- tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
- cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
- omap_dm_timer_stop(gptimer_wakeup);
- omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
- pr_info("PM: Resume timer in %u.%03u secs"
- " (%d ticks at %d ticks/sec.)\n",
- seconds, milliseconds, cycles, tick_rate);
-}
-
static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
{
struct seq_file *s = (struct seq_file *)user;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index c85923e..aaeea49 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -53,6 +53,19 @@
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+ return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+ return false;
+}
+#endif
+
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
@@ -120,8 +133,9 @@
goto no_sleep;
/* Block console output in case it is on one of the OMAP UARTs */
- if (try_acquire_console_sem())
- goto no_sleep;
+ if (!is_suspending())
+ if (try_acquire_console_sem())
+ goto no_sleep;
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
@@ -136,7 +150,8 @@
omap_uart_resume_idle(1);
omap_uart_resume_idle(0);
- release_console_sem();
+ if (!is_suspending())
+ release_console_sem();
no_sleep:
if (omap2_pm_debug) {
@@ -284,6 +299,12 @@
local_irq_enable();
}
+static int omap2_pm_begin(suspend_state_t state)
+{
+ suspend_state = state;
+ return 0;
+}
+
static int omap2_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
@@ -333,10 +354,17 @@
enable_hlt();
}
+static void omap2_pm_end(void)
+{
+ suspend_state = PM_SUSPEND_ON;
+}
+
static struct platform_suspend_ops omap_pm_ops = {
+ .begin = omap2_pm_begin,
.prepare = omap2_pm_prepare,
.enter = omap2_pm_enter,
.finish = omap2_pm_finish,
+ .end = omap2_pm_end,
.valid = suspend_valid_only_mem,
};
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 0ec8a04..648b8c5 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -50,6 +50,19 @@
#include "sdrc.h"
#include "control.h"
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+ return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+ return false;
+}
+#endif
+
/* Scratchpad offsets */
#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
@@ -387,10 +400,11 @@
}
/* Block console output in case it is on one of the OMAP UARTs */
- if (per_next_state < PWRDM_POWER_ON ||
- core_next_state < PWRDM_POWER_ON)
- if (try_acquire_console_sem())
- goto console_still_active;
+ if (!is_suspending())
+ if (per_next_state < PWRDM_POWER_ON ||
+ core_next_state < PWRDM_POWER_ON)
+ if (try_acquire_console_sem())
+ goto console_still_active;
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
@@ -470,7 +484,8 @@
omap_uart_resume_idle(3);
}
- release_console_sem();
+ if (!is_suspending())
+ release_console_sem();
console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
@@ -514,8 +529,6 @@
}
#ifdef CONFIG_SUSPEND
-static suspend_state_t suspend_state;
-
static int omap3_pm_prepare(void)
{
disable_hlt();
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 298a22a..f81acee 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -243,13 +243,14 @@
#define OMAP24XX_EN_GPT1_MASK (1 << 0)
/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2)
-#define OMAP24XX_ST_GPIOS_MASK 2
-#define OMAP24XX_ST_GPT1_SHIFT (1 << 0)
-#define OMAP24XX_ST_GPT1_MASK 0
+#define OMAP24XX_ST_GPIOS_SHIFT 2
+#define OMAP24XX_ST_GPIOS_MASK (1 << 2)
+#define OMAP24XX_ST_GPT1_SHIFT 0
+#define OMAP24XX_ST_GPT1_MASK (1 << 0)
/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM_SHIFT (1 << 0)
+#define OMAP2430_ST_MDM_SHIFT 0
+#define OMAP2430_ST_MDM_MASK (1 << 0)
/* 3430 register bits shared between CM & PRM registers */
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index c897e03..6604fc6 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -51,6 +51,13 @@
Buffalo Linkstation Pro/Live platform. Both v1 and
v2 devices are supported.
+config MACH_LINKSTATION_LSCHL
+ bool "Buffalo Linkstation Live v3 (LS-CHL)"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Linkstation Live v3 (LS-CHL) platform.
+
config MACH_LINKSTATION_MINI
bool "Buffalo Linkstation Mini"
select I2C_BOARDINFO
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index eb6eabc..7f18cda 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -21,3 +21,4 @@
obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o
obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
new file mode 100644
index 0000000..20a9b66
--- /dev/null
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -0,0 +1,327 @@
+/*
+ * arch/arm/mach-orion5x/ls-chl-setup.c
+ *
+ * Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio-fan.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * Linkstation LS-CHL Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LSCHL_NOR_BOOT_BASE 0xf4000000
+#define LSCHL_NOR_BOOT_SIZE SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data lschl_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource lschl_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = LSCHL_NOR_BOOT_BASE,
+ .end = LSCHL_NOR_BOOT_BASE + LSCHL_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device lschl_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &lschl_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &lschl_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data lschl_eth_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata lschl_i2c_rtc = {
+ I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LSCHL_GPIO_LED_ALARM 2
+#define LSCHL_GPIO_LED_INFO 3
+#define LSCHL_GPIO_LED_FUNC 17
+#define LSCHL_GPIO_LED_PWR 0
+
+static struct gpio_led lschl_led_pins[] = {
+ {
+ .name = "alarm:red",
+ .gpio = LSCHL_GPIO_LED_ALARM,
+ .active_low = 1,
+ }, {
+ .name = "info:amber",
+ .gpio = LSCHL_GPIO_LED_INFO,
+ .active_low = 1,
+ }, {
+ .name = "func:blue:top",
+ .gpio = LSCHL_GPIO_LED_FUNC,
+ .active_low = 1,
+ }, {
+ .name = "power:blue:bottom",
+ .gpio = LSCHL_GPIO_LED_PWR,
+ },
+};
+
+static struct gpio_led_platform_data lschl_led_data = {
+ .leds = lschl_led_pins,
+ .num_leds = ARRAY_SIZE(lschl_led_pins),
+};
+
+static struct platform_device lschl_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &lschl_led_data,
+ },
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data lschl_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+ * LS-CHL specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the LS-CHL, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ * to move the switch to ON position
+ *
+ */
+
+static void lschl_power_off(void)
+{
+ arm_machine_restart('h', NULL);
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+#define LSCHL_GPIO_USB_POWER 9
+#define LSCHL_GPIO_AUTO_POWER 17
+#define LSCHL_GPIO_POWER 18
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+#define LSCHL_GPIO_KEY_FUNC 15
+#define LSCHL_GPIO_KEY_POWER 8
+#define LSCHL_GPIO_KEY_AUTOPOWER 10
+#define LSCHL_SW_POWER 0x00
+#define LSCHL_SW_AUTOPOWER 0x01
+#define LSCHL_SW_FUNC 0x02
+
+static struct gpio_keys_button lschl_buttons[] = {
+ {
+ .type = EV_SW,
+ .code = LSCHL_SW_POWER,
+ .gpio = LSCHL_GPIO_KEY_POWER,
+ .desc = "Power-on Switch",
+ .active_low = 1,
+ }, {
+ .type = EV_SW,
+ .code = LSCHL_SW_AUTOPOWER,
+ .gpio = LSCHL_GPIO_KEY_AUTOPOWER,
+ .desc = "Power-auto Switch",
+ .active_low = 1,
+ }, {
+ .type = EV_SW,
+ .code = LSCHL_SW_FUNC,
+ .gpio = LSCHL_GPIO_KEY_FUNC,
+ .desc = "Function Switch",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data lschl_button_data = {
+ .buttons = lschl_buttons,
+ .nbuttons = ARRAY_SIZE(lschl_buttons),
+};
+
+static struct platform_device lschl_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &lschl_button_data,
+ },
+};
+
+#define LSCHL_GPIO_HDD_POWER 1
+
+/****************************************************************************
+ * GPIO Fan
+ ****************************************************************************/
+
+#define LSCHL_GPIO_FAN_LOW 16
+#define LSCHL_GPIO_FAN_HIGH 14
+#define LSCHL_GPIO_FAN_LOCK 6
+
+static struct gpio_fan_alarm lschl_alarm = {
+ .gpio = LSCHL_GPIO_FAN_LOCK,
+};
+
+static struct gpio_fan_speed lschl_speeds[] = {
+ {
+ .rpm = 0,
+ .ctrl_val = 3,
+ }, {
+ .rpm = 1500,
+ .ctrl_val = 2,
+ }, {
+ .rpm = 3250,
+ .ctrl_val = 1,
+ }, {
+ .rpm = 5000,
+ .ctrl_val = 0,
+ },
+};
+
+static int lschl_gpio_list[] = {
+ LSCHL_GPIO_FAN_HIGH, LSCHL_GPIO_FAN_LOW,
+};
+
+static struct gpio_fan_platform_data lschl_fan_data = {
+ .num_ctrl = ARRAY_SIZE(lschl_gpio_list),
+ .ctrl = lschl_gpio_list,
+ .alarm = &lschl_alarm,
+ .num_speed = ARRAY_SIZE(lschl_speeds),
+ .speed = lschl_speeds,
+};
+
+static struct platform_device lschl_fan_device = {
+ .name = "gpio-fan",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &lschl_fan_data,
+ },
+};
+
+/****************************************************************************
+ * GPIO Data
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode lschl_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* LED POWER */
+ { 1, MPP_GPIO }, /* HDD POWER */
+ { 2, MPP_GPIO }, /* LED ALARM */
+ { 3, MPP_GPIO }, /* LED INFO */
+ { 4, MPP_UNUSED },
+ { 5, MPP_UNUSED },
+ { 6, MPP_GPIO }, /* FAN LOCK */
+ { 7, MPP_GPIO }, /* SW INIT */
+ { 8, MPP_GPIO }, /* SW POWER */
+ { 9, MPP_GPIO }, /* USB POWER */
+ { 10, MPP_GPIO }, /* SW AUTO POWER */
+ { 11, MPP_UNUSED },
+ { 12, MPP_UNUSED },
+ { 13, MPP_UNUSED },
+ { 14, MPP_GPIO }, /* FAN HIGH */
+ { 15, MPP_GPIO }, /* SW FUNC */
+ { 16, MPP_GPIO }, /* FAN LOW */
+ { 17, MPP_GPIO }, /* LED FUNC */
+ { 18, MPP_UNUSED },
+ { 19, MPP_UNUSED },
+ { -1 },
+};
+
+static void __init lschl_init(void)
+{
+ /*
+ * Setup basic Orion functions. Needs to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(lschl_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&lschl_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&lschl_sata_data);
+ orion5x_uart0_init();
+ orion5x_xor_init();
+
+ orion5x_setup_dev_boot_win(LSCHL_NOR_BOOT_BASE,
+ LSCHL_NOR_BOOT_SIZE);
+ platform_device_register(&lschl_nor_flash);
+
+ platform_device_register(&lschl_leds);
+
+ platform_device_register(&lschl_button_device);
+
+ platform_device_register(&lschl_fan_device);
+
+ i2c_register_board_info(0, &lschl_i2c_rtc, 1);
+
+ /* usb power on */
+ gpio_set_value(LSCHL_GPIO_USB_POWER, 1);
+
+ /* register power-off method */
+ pm_power_off = lschl_power_off;
+
+ pr_info("%s: finished\n", __func__);
+}
+
+MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
+ /* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
+ .boot_params = 0x00000100,
+ .init_machine = lschl_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index dd235ec..1df6db6 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -50,6 +50,10 @@
select PXA3xx
select CPU_PXA930
+config MACH_SAARB
+ bool "PXA955 Handheld Platform (aka SAARB)"
+ select CPU_PXA955
+
comment "Third Party Dev Platforms (sorted by vendor name)"
config ARCH_PXA_IDP
@@ -232,10 +236,6 @@
bool "Toradex Colibri PXA270"
select PXA27x
-config MACH_COLIBRI_PXA270_EVALBOARD
- bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
- depends on MACH_COLIBRI
-
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
depends on MACH_COLIBRI
@@ -253,6 +253,10 @@
select PXA3xx
select CPU_PXA320
+config MACH_COLIBRI_EVALBOARD
+ bool "Toradex Colibri Evaluation Carrier Board support"
+ depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
+
config MACH_VPAC270
bool "Voipac PXA270"
select PXA27x
@@ -651,11 +655,17 @@
help
PXA935 (codename Tavor-P65)
-config CPU_PXA950
+config PXA95x
bool
- select CPU_PXA930
+ select CPU_PJ4
help
- PXA950 (codename Tavor-PV2)
+ Select code specific to PXA95x variants
+
+config CPU_PXA955
+ bool
+ select PXA95x
+ help
+ PXA950 (codename MG1)
config PXA_SHARP_C7xx
bool
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index e2f89c2..cc39d17 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -16,9 +16,10 @@
# Generic drivers that other drivers may depend upon
# SoC-specific code
-obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
+obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
+obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa95x.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
@@ -34,6 +35,7 @@
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_TAVOREVB3) += tavorevb3.o
obj-$(CONFIG_MACH_SAAR) += saar.o
+obj-$(CONFIG_MACH_SAARB) += saarb.o
# 3rd Party Dev Platforms
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
@@ -60,7 +62,7 @@
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
-obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) += colibri-pxa270-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_EVALBOARD) += colibri-evalboard.o
obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 21e18890..ccb2d0c 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -567,27 +567,29 @@
* NAND
******************************************************************************/
#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static uint16_t balloon3_ctl =
- BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
- BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
- BALLOON3_NAND_CONTROL_FLWP;
-
static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
+ uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
if (ctrl & NAND_CTRL_CHANGE) {
if (ctrl & NAND_CLE)
- balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE;
+ balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE;
else
- balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE;
+ balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE;
if (ctrl & NAND_ALE)
- balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE;
+ balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE;
else
- balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE;
+ balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE;
- __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+ if (balloon3_ctl_clr)
+ __raw_writel(balloon3_ctl_clr,
+ BALLOON3_NAND_CONTROL_REG);
+ if (balloon3_ctl_set)
+ __raw_writel(balloon3_ctl_set,
+ BALLOON3_NAND_CONTROL_REG |
+ BALLOON3_FPGA_SETnCLR);
}
if (cmd != NAND_CMD_NONE)
@@ -599,28 +601,33 @@
if (chip < 0 || chip > 3)
return;
- balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 |
- BALLOON3_NAND_CONTROL_FLCE1 |
- BALLOON3_NAND_CONTROL_FLCE2 |
- BALLOON3_NAND_CONTROL_FLCE3;
+ /* Assert all nCE lines */
+ __raw_writew(
+ BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
+ BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
/* Deassert correct nCE line */
- balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip);
+ __raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
+ BALLOON3_NAND_CONTROL_REG);
+}
- __raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+static int balloon3_nand_dev_ready(struct mtd_info *mtd)
+{
+ return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
}
static int balloon3_nand_probe(struct platform_device *pdev)
{
- void __iomem *temp_map;
uint16_t ver;
int ret;
- __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG);
+ __raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
+ BALLOON3_NAND_CONTROL2_REG | BALLOON3_FPGA_SETnCLR);
ver = __raw_readw(BALLOON3_FPGA_VER);
- if (ver > 0x0201)
- pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+ if (ver < 0x4f08)
+ pr_warn("The FPGA code, version 0x%04x, is too old. "
"NAND support might be broken in this version!", ver);
/* Power up the NAND chips */
@@ -635,7 +642,11 @@
gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
/* Deassert all nCE lines and write protect line */
- __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+ __raw_writel(
+ BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+ BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
+ BALLOON3_NAND_CONTROL_FLWP,
+ BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
return 0;
err2:
@@ -677,7 +688,7 @@
},
.ctrl = {
.hwcontrol = 0,
- .dev_ready = 0,
+ .dev_ready = balloon3_nand_dev_ready,
.select_chip = balloon3_nand_select_chip,
.cmd_ctrl = balloon3_nand_cmd_ctl,
.probe = balloon3_nand_probe,
@@ -802,7 +813,7 @@
static void __init balloon3_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
}
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4bd7a3c..4284513 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -149,7 +149,7 @@
MACHINE_START(CAPC7117,
"Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = capc7117_init
diff --git a/arch/arm/mach-pxa/clock-pxa2xx.c b/arch/arm/mach-pxa/clock-pxa2xx.c
new file mode 100644
index 0000000..1ce0904
--- /dev/null
+++ b/arch/arm/mach-pxa/clock-pxa2xx.c
@@ -0,0 +1,64 @@
+/*
+ * linux/arch/arm/mach-pxa/clock-pxa2xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <mach/pxa2xx-regs.h>
+
+#include "clock.h"
+
+void clk_pxa2xx_cken_enable(struct clk *clk)
+{
+ CKEN |= 1 << clk->cken;
+}
+
+void clk_pxa2xx_cken_disable(struct clk *clk)
+{
+ CKEN &= ~(1 << clk->cken);
+}
+
+const struct clkops clk_pxa2xx_cken_ops = {
+ .enable = clk_pxa2xx_cken_enable,
+ .disable = clk_pxa2xx_cken_disable,
+};
+
+#ifdef CONFIG_PM
+static uint32_t saved_cken;
+
+static int pxa2xx_clock_suspend(struct sys_device *d, pm_message_t state)
+{
+ saved_cken = CKEN;
+ return 0;
+}
+
+static int pxa2xx_clock_resume(struct sys_device *d)
+{
+ CKEN = saved_cken;
+ return 0;
+}
+#else
+#define pxa2xx_clock_suspend NULL
+#define pxa2xx_clock_resume NULL
+#endif
+
+struct sysdev_class pxa2xx_clock_sysclass = {
+ .name = "pxa2xx-clock",
+ .suspend = pxa2xx_clock_suspend,
+ .resume = pxa2xx_clock_resume,
+};
+
+static int __init pxa2xx_clock_init(void)
+{
+ if (cpu_is_pxa2xx())
+ return sysdev_class_register(&pxa2xx_clock_sysclass);
+ return 0;
+}
+postcore_initcall(pxa2xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c
new file mode 100644
index 0000000..1b08a34
--- /dev/null
+++ b/arch/arm/mach-pxa/clock-pxa3xx.c
@@ -0,0 +1,218 @@
+/*
+ * linux/arch/arm/mach-pxa/clock-pxa3xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/smemc.h>
+#include <mach/pxa3xx-regs.h>
+
+#include "clock.h"
+
+/* Crystal clock: 13MHz */
+#define BASE_CLK 13000000
+
+/* Ring Oscillator Clock: 60MHz */
+#define RO_CLK 60000000
+
+#define ACCR_D0CS (1 << 26)
+#define ACCR_PCCE (1 << 11)
+
+/* crystal frequency to HSIO bus frequency multiplier (HSS) */
+static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
+
+/*
+ * Get the clock frequency as reflected by CCSR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
+ */
+unsigned int pxa3xx_get_clk_frequency_khz(int info)
+{
+ unsigned long acsr, xclkcfg;
+ unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
+
+ /* Read XCLKCFG register turbo bit */
+ __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
+ t = xclkcfg & 0x1;
+
+ acsr = ACSR;
+
+ xl = acsr & 0x1f;
+ xn = (acsr >> 8) & 0x7;
+ hss = (acsr >> 14) & 0x3;
+
+ XL = xl * BASE_CLK;
+ XN = xn * XL;
+
+ ro = acsr & ACCR_D0CS;
+
+ CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
+ HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+ if (info) {
+ pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
+ RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
+ (ro) ? "" : "in");
+ pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
+ XL / 1000000, (XL % 1000000) / 10000, xl);
+ pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
+ XN / 1000000, (XN % 1000000) / 10000, xn,
+ (t) ? "" : "in");
+ pr_info("HSIO bus clock: %d.%02dMHz\n",
+ HSS / 1000000, (HSS % 1000000) / 10000);
+ }
+
+ return CLK / 1000;
+}
+
+/*
+ * Return the current AC97 clock frequency.
+ */
+static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk)
+{
+ unsigned long rate = 312000000;
+ unsigned long ac97_div;
+
+ ac97_div = AC97_DIV;
+
+ /* This may loose precision for some rates but won't for the
+ * standard 24.576MHz.
+ */
+ rate /= (ac97_div >> 12) & 0x7fff;
+ rate *= (ac97_div & 0xfff);
+
+ return rate;
+}
+
+/*
+ * Return the current HSIO bus clock frequency
+ */
+static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
+{
+ unsigned long acsr;
+ unsigned int hss, hsio_clk;
+
+ acsr = ACSR;
+
+ hss = (acsr >> 14) & 0x3;
+ hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+ return hsio_clk;
+}
+
+/* crystal frequency to static memory controller multiplier (SMCFS) */
+static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
+static unsigned int df_clkdiv[4] = { 1, 2, 4, 1 };
+
+static unsigned long clk_pxa3xx_smemc_getrate(struct clk *clk)
+{
+ unsigned long acsr = ACSR;
+ unsigned long memclkcfg = __raw_readl(MEMCLKCFG);
+ unsigned int smcfs = (acsr >> 23) & 0x7;
+
+ return BASE_CLK * smcfs_mult[(acsr >> 23) & 0x7] /
+ df_clkdiv[(memclkcfg >> 16) & 0x3];
+}
+
+void clk_pxa3xx_cken_enable(struct clk *clk)
+{
+ unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+ if (clk->cken < 32)
+ CKENA |= mask;
+ else
+ CKENB |= mask;
+}
+
+void clk_pxa3xx_cken_disable(struct clk *clk)
+{
+ unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+ if (clk->cken < 32)
+ CKENA &= ~mask;
+ else
+ CKENB &= ~mask;
+}
+
+const struct clkops clk_pxa3xx_cken_ops = {
+ .enable = clk_pxa3xx_cken_enable,
+ .disable = clk_pxa3xx_cken_disable,
+};
+
+const struct clkops clk_pxa3xx_hsio_ops = {
+ .enable = clk_pxa3xx_cken_enable,
+ .disable = clk_pxa3xx_cken_disable,
+ .getrate = clk_pxa3xx_hsio_getrate,
+};
+
+const struct clkops clk_pxa3xx_ac97_ops = {
+ .enable = clk_pxa3xx_cken_enable,
+ .disable = clk_pxa3xx_cken_disable,
+ .getrate = clk_pxa3xx_ac97_getrate,
+};
+
+const struct clkops clk_pxa3xx_smemc_ops = {
+ .enable = clk_pxa3xx_cken_enable,
+ .disable = clk_pxa3xx_cken_disable,
+ .getrate = clk_pxa3xx_smemc_getrate,
+};
+
+static void clk_pout_enable(struct clk *clk)
+{
+ OSCC |= OSCC_PEN;
+}
+
+static void clk_pout_disable(struct clk *clk)
+{
+ OSCC &= ~OSCC_PEN;
+}
+
+const struct clkops clk_pxa3xx_pout_ops = {
+ .enable = clk_pout_enable,
+ .disable = clk_pout_disable,
+};
+
+#ifdef CONFIG_PM
+static uint32_t cken[2];
+static uint32_t accr;
+
+static int pxa3xx_clock_suspend(struct sys_device *d, pm_message_t state)
+{
+ cken[0] = CKENA;
+ cken[1] = CKENB;
+ accr = ACCR;
+ return 0;
+}
+
+static int pxa3xx_clock_resume(struct sys_device *d)
+{
+ ACCR = accr;
+ CKENA = cken[0];
+ CKENB = cken[1];
+ return 0;
+}
+#else
+#define pxa3xx_clock_suspend NULL
+#define pxa3xx_clock_resume NULL
+#endif
+
+struct sysdev_class pxa3xx_clock_sysclass = {
+ .name = "pxa3xx-clock",
+ .suspend = pxa3xx_clock_suspend,
+ .resume = pxa3xx_clock_resume,
+};
+
+static int __init pxa3xx_clock_init(void)
+{
+ if (cpu_is_pxa3xx() || cpu_is_pxa95x())
+ return sysdev_class_register(&pxa3xx_clock_sysclass);
+ return 0;
+}
+postcore_initcall(pxa3xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index abba008..8184fe2 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -3,21 +3,12 @@
*/
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
#include <linux/clk.h>
#include <linux/spinlock.h>
-#include <linux/platform_device.h>
#include <linux/delay.h>
#include <asm/clkdev.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/hardware.h>
-#include "devices.h"
-#include "generic.h"
#include "clock.h"
static DEFINE_SPINLOCK(clocks_lock);
@@ -63,18 +54,19 @@
}
EXPORT_SYMBOL(clk_get_rate);
-
-void clk_cken_enable(struct clk *clk)
+void clk_dummy_enable(struct clk *clk)
{
- CKEN |= 1 << clk->cken;
}
-void clk_cken_disable(struct clk *clk)
+void clk_dummy_disable(struct clk *clk)
{
- CKEN &= ~(1 << clk->cken);
}
-const struct clkops clk_cken_ops = {
- .enable = clk_cken_enable,
- .disable = clk_cken_disable,
+const struct clkops clk_dummy_ops = {
+ .enable = clk_dummy_enable,
+ .disable = clk_dummy_disable,
+};
+
+struct clk clk_dummy = {
+ .ops = &clk_dummy_ops,
};
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index d848874..6e94994 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,3 +1,4 @@
+#include <linux/sysdev.h>
#include <asm/clkdev.h>
struct clkops {
@@ -14,6 +15,12 @@
unsigned int enabled;
};
+void clk_dummy_enable(struct clk *);
+void clk_dummy_disable(struct clk *);
+
+extern const struct clkops clk_dummy_ops;
+extern struct clk clk_dummy;
+
#define INIT_CLKREG(_clk,_devname,_conname) \
{ \
.clk = _clk, \
@@ -21,14 +28,6 @@
.con_id = _conname, \
}
-#define DEFINE_CKEN(_name, _cken, _rate, _delay) \
-struct clk clk_##_name = { \
- .ops = &clk_cken_ops, \
- .rate = _rate, \
- .cken = CKEN_##_cken, \
- .delay = _delay, \
- }
-
#define DEFINE_CK(_name, _cken, _ops) \
struct clk clk_##_name = { \
.ops = _ops, \
@@ -42,12 +41,22 @@
.delay = _delay, \
}
-extern const struct clkops clk_cken_ops;
+#define DEFINE_PXA2_CKEN(_name, _cken, _rate, _delay) \
+struct clk clk_##_name = { \
+ .ops = &clk_pxa2xx_cken_ops, \
+ .rate = _rate, \
+ .cken = CKEN_##_cken, \
+ .delay = _delay, \
+ }
-void clk_cken_enable(struct clk *clk);
-void clk_cken_disable(struct clk *clk);
+extern const struct clkops clk_pxa2xx_cken_ops;
-#ifdef CONFIG_PXA3xx
+void clk_pxa2xx_cken_enable(struct clk *clk);
+void clk_pxa2xx_cken_disable(struct clk *clk);
+
+extern struct sysdev_class pxa2xx_clock_sysclass;
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \
struct clk clk_##_name = { \
.ops = &clk_pxa3xx_cken_ops, \
@@ -56,14 +65,14 @@
.delay = _delay, \
}
-#define DEFINE_PXA3_CK(_name, _cken, _ops) \
-struct clk clk_##_name = { \
- .ops = _ops, \
- .cken = CKEN_##_cken, \
- }
-
extern const struct clkops clk_pxa3xx_cken_ops;
+extern const struct clkops clk_pxa3xx_hsio_ops;
+extern const struct clkops clk_pxa3xx_ac97_ops;
+extern const struct clkops clk_pxa3xx_pout_ops;
+extern const struct clkops clk_pxa3xx_smemc_ops;
+
extern void clk_pxa3xx_cken_enable(struct clk *);
extern void clk_pxa3xx_cken_disable(struct clk *);
-#endif
+extern struct sysdev_class pxa3xx_clock_sysclass;
+#endif
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index d34b99f..b734d84 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -24,6 +24,7 @@
#include <mach/pxa2xx-regs.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
+#include <mach/smemc.h>
#include <asm/hardware/it8152.h>
@@ -392,9 +393,9 @@
cmx2xx_pci_suspend();
/* save MSC registers */
- sleep_save_msc[0] = MSC0;
- sleep_save_msc[1] = MSC1;
- sleep_save_msc[2] = MSC2;
+ sleep_save_msc[0] = __raw_readl(MSC0);
+ sleep_save_msc[1] = __raw_readl(MSC1);
+ sleep_save_msc[2] = __raw_readl(MSC2);
/* setup power saving mode registers */
PCFR = 0x0;
@@ -416,9 +417,9 @@
cmx2xx_pci_resume();
/* restore MSC registers */
- MSC0 = sleep_save_msc[0];
- MSC1 = sleep_save_msc[1];
- MSC2 = sleep_save_msc[2];
+ __raw_writel(sleep_save_msc[0], MSC0);
+ __raw_writel(sleep_save_msc[1], MSC1);
+ __raw_writel(sleep_save_msc[2], MSC2);
return 0;
}
@@ -498,7 +499,12 @@
static void __init cmx2xx_map_io(void)
{
- pxa_map_io();
+ if (cpu_is_pxa25x())
+ pxa25x_map_io();
+
+ if (cpu_is_pxa27x())
+ pxa27x_map_io();
+
iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
it8152_base_address = CMX2XX_IT8152_VIRT;
@@ -506,7 +512,11 @@
#else
static void __init cmx2xx_map_io(void)
{
- pxa_map_io();
+ if (cpu_is_pxa25x())
+ pxa25x_map_io();
+
+ if (cpu_is_pxa27x())
+ pxa27x_map_io();
}
#endif
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 922b107..7984268 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -857,7 +857,7 @@
MACHINE_START(CM_X300, "CM-X300 module")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = cm_x300_init,
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
new file mode 100644
index 0000000..6b2c800
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -0,0 +1,121 @@
+/*
+ * linux/arch/arm/mach-pxa/colibri-evalboard.c
+ *
+ * Support for Toradex Colibri Evaluation Carrier Board
+ * Daniel Mack <daniel@caiaq.de>
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/mach/arch.h>
+#include <linux/i2c.h>
+
+#include <mach/pxa27x.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data colibri_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = -1,
+ .gpio_card_ro = -1,
+ .detect_delay_ms = 200,
+};
+
+static void __init colibri_mmc_init(void)
+{
+ if (machine_is_colibri()) /* PXA270 Colibri */
+ colibri_mci_platform_data.gpio_card_detect =
+ GPIO0_COLIBRI_PXA270_SD_DETECT;
+ if (machine_is_colibri300()) /* PXA300 Colibri */
+ colibri_mci_platform_data.gpio_card_detect =
+ GPIO39_COLIBRI_PXA300_SD_DETECT;
+ else /* PXA320 Colibri */
+ colibri_mci_platform_data.gpio_card_detect =
+ GPIO28_COLIBRI_PXA320_SD_DETECT;
+
+ pxa_set_mci_info(&colibri_mci_platform_data);
+}
+#else
+static inline void colibri_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int colibri_ohci_init(struct device *dev)
+{
+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+ return 0;
+}
+
+static struct pxaohci_platform_data colibri_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 |
+ POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ .init = colibri_ohci_init,
+};
+
+static void __init colibri_uhc_init(void)
+{
+ /* Colibri PXA270 has two usb ports, TBA for 320 */
+ if (machine_is_colibri())
+ colibri_ohci_info.flags |= ENABLE_PORT2;
+
+ pxa_set_ohci_info(&colibri_ohci_info);
+}
+#else
+static inline void colibri_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C RTC
+ ******************************************************************************/
+#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
+static struct i2c_board_info __initdata colibri_i2c_devs[] = {
+ {
+ I2C_BOARD_INFO("m41t00", 0x68),
+ },
+};
+
+static void __init colibri_rtc_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_i2c_devs));
+}
+#else
+static inline void colibri_rtc_init(void) {}
+#endif
+
+void __init colibri_evalboard_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ colibri_mmc_init();
+ colibri_uhc_init();
+ colibri_rtc_init();
+}
diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
deleted file mode 100644
index 0f3b632..0000000
--- a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
- *
- * Support for Toradex PXA270 based Colibri Evaluation Carrier Board
- * Daniel Mack <daniel@caiaq.de>
- * Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxa27x-udc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
- /* MMC */
- GPIO32_MMC_CLK,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
- GPIO112_MMC_CMD,
- GPIO0_GPIO, /* SD detect */
-
- /* FFUART */
- GPIO39_FFUART_TXD,
- GPIO34_FFUART_RXD,
-
- /* UHC */
- GPIO88_USBH1_PWR,
- GPIO89_USBH1_PEN,
- GPIO119_USBH2_PWR,
- GPIO120_USBH2_PEN,
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_power = -1,
- .gpio_card_detect = GPIO0_COLIBRI_PXA270_SD_DETECT,
- .gpio_card_ro = -1,
- .detect_delay_ms = 200,
-};
-
-static void __init colibri_pxa270_mmc_init(void)
-{
- pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
-}
-#else
-static inline void colibri_pxa270_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int colibri_pxa270_ohci_init(struct device *dev)
-{
- UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
- return 0;
-}
-
-static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
- .port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT1 | ENABLE_PORT2 |
- POWER_CONTROL_LOW | POWER_SENSE_LOW,
- .init = colibri_pxa270_ohci_init,
-};
-
-static void __init colibri_pxa270_uhc_init(void)
-{
- pxa_set_ohci_info(&colibri_pxa270_ohci_info);
-}
-#else
-static inline void colibri_pxa270_uhc_init(void) {}
-#endif
-
-void __init colibri_pxa270_evalboard_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
-
- colibri_pxa270_mmc_init();
- colibri_pxa270_uhc_init();
-}
-
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 37f0f3e..07b62a0 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -46,52 +46,6 @@
#define GPIO113_INCOME_TS_IRQ (113)
/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t income_pin_config[] __initdata = {
- /* MMC */
- GPIO32_MMC_CLK,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
- GPIO112_MMC_CMD,
- GPIO0_GPIO, /* SD detect */
- GPIO1_GPIO, /* SD read-only */
-
- /* FFUART */
- GPIO39_FFUART_TXD,
- GPIO34_FFUART_RXD,
-
- /* BFUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO45_BTUART_RTS,
-
- /* STUART */
- GPIO46_STUART_RXD,
- GPIO47_STUART_TXD,
-
- /* UHC */
- GPIO88_USBH1_PWR,
- GPIO89_USBH1_PEN,
-
- /* LCD */
- GPIOxx_LCD_TFT_16BPP,
-
- /* PWM */
- GPIO16_PWM0_OUT,
-
- /* I2C */
- GPIO117_I2C_SCL,
- GPIO118_I2C_SDA,
-
- /* LED */
- GPIO54_GPIO, /* LED A */
- GPIO55_GPIO, /* LED B */
-};
-
-/******************************************************************************
* SD/MMC card controller
******************************************************************************/
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
@@ -257,7 +211,6 @@
void __init colibri_pxa270_income_boardinit(void)
{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index bc04510..6fc5d32 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -33,6 +33,103 @@
#include "generic.h"
/******************************************************************************
+ * Evaluation board MFP
+ ******************************************************************************/
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO0_GPIO, /* SD detect */
+
+ /* FFUART */
+ GPIO39_FFUART_TXD,
+ GPIO34_FFUART_RXD,
+
+ /* UHC */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+ GPIO119_USBH2_PWR,
+ GPIO120_USBH2_PEN,
+
+ /* PCMCIA */
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO49_nPWE,
+ GPIO48_nPOE,
+ GPIO57_nIOIS16,
+ GPIO56_nPWAIT,
+ GPIO104_PSKTSEL,
+ GPIO53_GPIO, /* RESET */
+ GPIO83_GPIO, /* BVD1 */
+ GPIO82_GPIO, /* BVD2 */
+ GPIO1_GPIO, /* READY */
+ GPIO84_GPIO, /* DETECT */
+ GPIO107_GPIO, /* PPEN */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+};
+#else
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
+#endif
+
+#ifdef CONFIG_MACH_COLIBRI_PXA270_INCOME
+static mfp_cfg_t income_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO0_GPIO, /* SD detect */
+ GPIO1_GPIO, /* SD read-only */
+
+ /* FFUART */
+ GPIO39_FFUART_TXD,
+ GPIO34_FFUART_RXD,
+
+ /* BFUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* UHC */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* LED */
+ GPIO54_GPIO, /* LED A */
+ GPIO55_GPIO, /* LED B */
+};
+#else
+static mfp_cfg_t income_pin_config[] __initdata = {};
+#endif
+
+/******************************************************************************
* Pin configuration
******************************************************************************/
static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
@@ -184,10 +281,13 @@
colibri_pxa270_tsc_init();
switch (colibri_pxa270_baseboard) {
- case COLIBRI_PXA270_EVALBOARD:
- colibri_pxa270_evalboard_init();
+ case COLIBRI_EVALBOARD:
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(
+ colibri_pxa270_evalboard_pin_config));
+ colibri_evalboard_init();
break;
case COLIBRI_PXA270_INCOME:
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
colibri_pxa270_income_boardinit();
break;
default:
@@ -209,7 +309,7 @@
MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
.boot_params = COLIBRI_SDRAM_BASE + 0x100,
.init_machine = colibri_pxa270_init,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_END
@@ -217,7 +317,7 @@
MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
.boot_params = 0xa0000100,
.init_machine = colibri_pxa270_income_init,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index a70b256..fddb16d 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -31,9 +31,38 @@
#include "generic.h"
#include "devices.h"
+
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
+ /* MMC */
+ GPIO7_MMC1_CLK,
+ GPIO14_MMC1_CMD,
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO39_GPIO, /* SD detect */
+
+ /* UHC */
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+ GPIO77_USB_P3_1,
+ GPIO78_USB_P3_2,
+ GPIO79_USB_P3_3,
+ GPIO80_USB_P3_4,
+ GPIO81_USB_P3_5,
+ GPIO82_USB_P3_6,
+
+ /* I2C */
+ GPIO21_I2C_SCL,
+ GPIO22_I2C_SDA,
+};
+#else
+static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {};
+#endif
+
#if defined(CONFIG_AX88796)
#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO)
-
/*
* Asix AX88796 Ethernet
*/
@@ -80,35 +109,6 @@
static inline void __init colibri_pxa300_init_eth(void) {}
#endif /* CONFIG_AX88796 */
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static mfp_cfg_t colibri_pxa300_usb_pin_config[] __initdata = {
- GPIO0_2_USBH_PEN,
- GPIO1_2_USBH_PWR,
-};
-
-static struct pxaohci_platform_data colibri_pxa300_ohci_info = {
- .port_mode = PMM_GLOBAL_MODE,
- .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-void __init colibri_pxa300_init_ohci(void)
-{
- pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_usb_pin_config));
- pxa_set_ohci_info(&colibri_pxa300_ohci_info);
-}
-#else
-static inline void colibri_pxa300_init_ohci(void) {}
-#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
-
-static mfp_cfg_t colibri_pxa300_mmc_pin_config[] __initdata = {
- GPIO7_MMC1_CLK,
- GPIO14_MMC1_CMD,
- GPIO3_MMC1_DAT0,
- GPIO4_MMC1_DAT1,
- GPIO5_MMC1_DAT2,
- GPIO6_MMC1_DAT3,
-};
-
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
GPIO54_LCD_LDD_0,
@@ -171,24 +171,21 @@
void __init colibri_pxa300_init(void)
{
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
-
colibri_pxa300_init_eth();
- colibri_pxa300_init_ohci();
colibri_pxa3xx_init_nand();
colibri_pxa300_init_lcd();
colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
colibri_pxa310_init_ac97();
- colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config),
- mfp_to_gpio(MFP_PIN_GPIO13));
+
+ /* Evalboard init */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
+ colibri_evalboard_init();
}
MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
.boot_params = COLIBRI_SDRAM_BASE + 0x100,
.init_machine = colibri_pxa300_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ca5f29e..ff9ff5f 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -35,9 +35,72 @@
#include "generic.h"
#include "devices.h"
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
+ /* MMC */
+ GPIO22_MMC1_CLK,
+ GPIO23_MMC1_CMD,
+ GPIO18_MMC1_DAT0,
+ GPIO19_MMC1_DAT1,
+ GPIO20_MMC1_DAT2,
+ GPIO21_MMC1_DAT3,
+ GPIO28_GPIO, /* SD detect */
+
+ /* UART 1 configuration (may be set by bootloader) */
+ GPIO99_UART1_CTS,
+ GPIO104_UART1_RTS,
+ GPIO97_UART1_RXD,
+ GPIO98_UART1_TXD,
+ GPIO101_UART1_DTR,
+ GPIO103_UART1_DSR,
+ GPIO100_UART1_DCD,
+ GPIO102_UART1_RI,
+
+ /* UART 2 configuration */
+ GPIO109_UART2_CTS,
+ GPIO112_UART2_RTS,
+ GPIO110_UART2_RXD,
+ GPIO111_UART2_TXD,
+
+ /* UART 3 configuration */
+ GPIO30_UART3_RXD,
+ GPIO31_UART3_TXD,
+
+ /* UHC */
+ GPIO2_2_USBH_PEN,
+ GPIO3_2_USBH_PWR,
+
+ /* I2C */
+ GPIO32_I2C_SCL,
+ GPIO33_I2C_SDA,
+
+ /* PCMCIA */
+ MFP_CFG(GPIO59, AF7), /* PRST ; AF7 to tristate */
+ MFP_CFG(GPIO61, AF7), /* PCE1 ; AF7 to tristate */
+ MFP_CFG(GPIO60, AF7), /* PCE2 ; AF7 to tristate */
+ MFP_CFG(GPIO62, AF7), /* PCD ; AF7 to tristate */
+ MFP_CFG(GPIO56, AF7), /* PSKTSEL ; AF7 to tristate */
+ GPIO27_GPIO, /* RDnWR ; input/tristate */
+ GPIO50_GPIO, /* PREG ; input/tristate */
+ GPIO2_RDY,
+ GPIO5_NPIOR,
+ GPIO6_NPIOW,
+ GPIO7_NPIOS16,
+ GPIO8_NPWAIT,
+ GPIO29_GPIO, /* PRDY (READY GPIO) */
+ GPIO57_GPIO, /* PPEN (POWER GPIO) */
+ GPIO81_GPIO, /* PCD (DETECT GPIO) */
+ GPIO77_GPIO, /* PRST (RESET GPIO) */
+ GPIO53_GPIO, /* PBVD1 */
+ GPIO79_GPIO, /* PBVD2 */
+ GPIO54_GPIO, /* POE */
+};
+#else
+static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
+#endif
+
#if defined(CONFIG_AX88796)
#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO36_GPIO)
-
/*
* Asix AX88796 Ethernet
*/
@@ -84,26 +147,6 @@
static inline void __init colibri_pxa320_init_eth(void) {}
#endif /* CONFIG_AX88796 */
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static mfp_cfg_t colibri_pxa320_usb_pin_config[] __initdata = {
- GPIO2_2_USBH_PEN,
- GPIO3_2_USBH_PWR,
-};
-
-static struct pxaohci_platform_data colibri_pxa320_ohci_info = {
- .port_mode = PMM_GLOBAL_MODE,
- .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-void __init colibri_pxa320_init_ohci(void)
-{
- pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_usb_pin_config));
- pxa_set_ohci_info(&colibri_pxa320_ohci_info);
-}
-#else
-static inline void colibri_pxa320_init_ohci(void) {}
-#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
-
#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
.gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96),
@@ -140,15 +183,6 @@
static inline void colibri_pxa320_init_udc(void) {}
#endif
-static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
- GPIO22_MMC1_CLK,
- GPIO23_MMC1_CMD,
- GPIO18_MMC1_DAT0,
- GPIO19_MMC1_DAT1,
- GPIO20_MMC1_DAT2,
- GPIO21_MMC1_DAT3
-};
-
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
GPIO6_2_LCD_LDD_0,
@@ -205,59 +239,24 @@
static inline void colibri_pxa320_init_ac97(void) {}
#endif
-/*
- * The following configuration is verified to work with the Toradex Orchid
- * carrier board
- */
-static mfp_cfg_t colibri_pxa320_uart_pin_config[] __initdata = {
- /* UART 1 configuration (may be set by bootloader) */
- GPIO99_UART1_CTS,
- GPIO104_UART1_RTS,
- GPIO97_UART1_RXD,
- GPIO98_UART1_TXD,
- GPIO101_UART1_DTR,
- GPIO103_UART1_DSR,
- GPIO100_UART1_DCD,
- GPIO102_UART1_RI,
-
- /* UART 2 configuration */
- GPIO109_UART2_CTS,
- GPIO112_UART2_RTS,
- GPIO110_UART2_RXD,
- GPIO111_UART2_TXD,
-
- /* UART 3 configuration */
- GPIO30_UART3_RXD,
- GPIO31_UART3_TXD,
-};
-
-static void __init colibri_pxa320_init_uart(void)
-{
- pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config));
-}
-
void __init colibri_pxa320_init(void)
{
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
-
colibri_pxa320_init_eth();
- colibri_pxa320_init_ohci();
colibri_pxa3xx_init_nand();
colibri_pxa320_init_lcd();
colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
colibri_pxa320_init_ac97();
- colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
- mfp_to_gpio(MFP_PIN_GPIO28));
- colibri_pxa320_init_uart();
colibri_pxa320_init_udc();
+
+ /* Evalboard init */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
+ colibri_evalboard_init();
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
.boot_params = COLIBRI_SDRAM_BASE + 0x100,
.init_machine = colibri_pxa320_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 199afa2..96b2d9f 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -64,55 +64,6 @@
}
#endif
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static int mmc_detect_pin;
-
-static int colibri_pxa3xx_mci_init(struct device *dev,
- irq_handler_t colibri_mmc_detect_int,
- void *data)
-{
- int ret;
-
- ret = gpio_request(mmc_detect_pin, "mmc card detect");
- if (ret)
- return ret;
-
- gpio_direction_input(mmc_detect_pin);
- ret = request_irq(gpio_to_irq(mmc_detect_pin), colibri_mmc_detect_int,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (ret) {
- gpio_free(mmc_detect_pin);
- return ret;
- }
-
- return 0;
-}
-
-static void colibri_pxa3xx_mci_exit(struct device *dev, void *data)
-{
- free_irq(mmc_detect_pin, data);
- gpio_free(gpio_to_irq(mmc_detect_pin));
-}
-
-static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
- .detect_delay_ms = 200,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .init = colibri_pxa3xx_mci_init,
- .exit = colibri_pxa3xx_mci_exit,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
-};
-
-void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
-{
- pxa3xx_mfp_config(pins, len);
- mmc_detect_pin = detect_pin;
- pxa_set_mci_info(&colibri_pxa3xx_mci_platform_data);
-}
-#endif /* CONFIG_MMC_PXA || CONFIG_MMC_PXA_MODULE */
-
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static int lcd_bl_pin;
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 821229ac..9f3e5af 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -721,7 +721,7 @@
#ifdef CONFIG_MACH_CORGI
MACHINE_START(CORGI, "SHARP Corgi")
.fixup = fixup_corgi,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
@@ -731,7 +731,7 @@
#ifdef CONFIG_MACH_SHEPHERD
MACHINE_START(SHEPHERD, "SHARP Shepherd")
.fixup = fixup_corgi,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
@@ -741,7 +741,7 @@
#ifdef CONFIG_MACH_HUSKY
MACHINE_START(HUSKY, "SHARP Husky")
.fixup = fixup_corgi,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 58093d9..6a7aeab 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -38,8 +38,10 @@
#include <linux/cpufreq.h>
#include <linux/err.h>
#include <linux/regulator/consumer.h>
+#include <linux/io.h>
#include <mach/pxa2xx-regs.h>
+#include <mach/smemc.h>
#ifdef DEBUG
static unsigned int freq_debug;
@@ -242,7 +244,7 @@
static void init_sdram_rows(void)
{
- uint32_t mdcnfg = MDCNFG;
+ uint32_t mdcnfg = __raw_readl(MDCNFG);
unsigned int drac2 = 0, drac0 = 0;
if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
@@ -331,8 +333,8 @@
* we need to preset the smaller DRI before the change. If we're
* speeding up we need to set the larger DRI value after the change.
*/
- preset_mdrefr = postset_mdrefr = MDREFR;
- if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
+ preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
+ if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
preset_mdrefr |= mdrefr_dri(new_freq_mem);
}
@@ -370,7 +372,7 @@
3: nop \n\
"
: "=&r" (unused)
- : "r" (&MDREFR), "r" (cclkcfg),
+ : "r" (MDREFR), "r" (cclkcfg),
"r" (preset_mdrefr), "r" (postset_mdrefr)
: "r4", "r5");
local_irq_restore(flags);
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 57cacaf..a305424 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -27,6 +27,7 @@
#include <mach/ohci.h>
#include <mach/pxa2xx-regs.h>
#include <mach/audio.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
@@ -255,9 +256,9 @@
static void __init csb726_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
-/* MSC1 = 0x7ffc3ffc; *//* LAN9215/EXP_CS */
-/* MSC2 = 0x06697ff4; *//* none/SM501 */
- MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
+/* __raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
+/* __raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
+ __raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
@@ -273,7 +274,7 @@
MACHINE_START(CSB726, "Cogent CSB726")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = csb726_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index aaa1166..022c2fa 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -342,27 +342,6 @@
};
#endif
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_resources_i2c_power[] = {
- {
- .start = 0x40f500c0,
- .end = 0x40f500d3,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PWRI2C,
- .end = IRQ_PWRI2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device pxa3xx_device_i2c_power = {
- .name = "pxa3xx-pwri2c",
- .id = 1,
- .resource = pxa3xx_resources_i2c_power,
- .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
-};
-#endif
-
static struct resource pxai2s_resources[] = {
{
.start = 0x40400000,
@@ -633,30 +612,35 @@
#endif /* CONFIG_PXA25x */
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-
-static struct resource pxa27x_resource_keypad[] = {
+static struct resource pxa27x_resource_camera[] = {
[0] = {
- .start = 0x41500000,
- .end = 0x4150004c,
+ .start = 0x50000000,
+ .end = 0x50000fff,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_KEYPAD,
- .end = IRQ_KEYPAD,
+ .start = IRQ_CAMERA,
+ .end = IRQ_CAMERA,
.flags = IORESOURCE_IRQ,
},
};
-struct platform_device pxa27x_device_keypad = {
- .name = "pxa27x-keypad",
- .id = -1,
- .resource = pxa27x_resource_keypad,
- .num_resources = ARRAY_SIZE(pxa27x_resource_keypad),
+static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
+
+static struct platform_device pxa27x_device_camera = {
+ .name = "pxa27x-camera",
+ .id = 0, /* This is used to put cameras on this interface */
+ .dev = {
+ .dma_mask = &pxa27x_dma_mask_camera,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(pxa27x_resource_camera),
+ .resource = pxa27x_resource_camera,
};
-void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
+void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
{
- pxa_register_device(&pxa27x_device_keypad, info);
+ pxa_register_device(&pxa27x_device_camera, info);
}
static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
@@ -689,6 +673,33 @@
{
pxa_register_device(&pxa27x_device_ohci, info);
}
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+static struct resource pxa27x_resource_keypad[] = {
+ [0] = {
+ .start = 0x41500000,
+ .end = 0x4150004c,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KEYPAD,
+ .end = IRQ_KEYPAD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa27x_device_keypad = {
+ .name = "pxa27x-keypad",
+ .id = -1,
+ .resource = pxa27x_resource_keypad,
+ .num_resources = ARRAY_SIZE(pxa27x_resource_keypad),
+};
+
+void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
+{
+ pxa_register_device(&pxa27x_device_keypad, info);
+}
static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
@@ -833,79 +844,9 @@
.resource = pxa27x_resource_pwm1,
.num_resources = ARRAY_SIZE(pxa27x_resource_pwm1),
};
-
-static struct resource pxa27x_resource_camera[] = {
- [0] = {
- .start = 0x50000000,
- .end = 0x50000fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CAMERA,
- .end = IRQ_CAMERA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
-
-static struct platform_device pxa27x_device_camera = {
- .name = "pxa27x-camera",
- .id = 0, /* This is used to put cameras on this interface */
- .dev = {
- .dma_mask = &pxa27x_dma_mask_camera,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(pxa27x_resource_camera),
- .resource = pxa27x_resource_camera,
-};
-
-void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
-{
- pxa_register_device(&pxa27x_device_camera, info);
-}
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/
#ifdef CONFIG_PXA3xx
-static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa3xx_resource_ssp4[] = {
- [0] = {
- .start = 0x41a00000,
- .end = 0x41a0003f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SSP4,
- .end = IRQ_SSP4,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* DRCMR for RX */
- .start = 2,
- .end = 2,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- /* DRCMR for TX */
- .start = 3,
- .end = 3,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device pxa3xx_device_ssp4 = {
- /* PXA3xx SSP is basically equivalent to PXA27x */
- .name = "pxa27x-ssp",
- .id = 3,
- .dev = {
- .dma_mask = &pxa3xx_ssp4_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = pxa3xx_resource_ssp4,
- .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
-};
-
static struct resource pxa3xx_resources_mci2[] = {
[0] = {
.start = 0x42000000,
@@ -984,6 +925,54 @@
pxa_register_device(&pxa3xx_device_mci3, info);
}
+static struct resource pxa3xx_resources_gcu[] = {
+ {
+ .start = 0x54000000,
+ .end = 0x54000fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_GCU,
+ .end = IRQ_GCU,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_gcu = {
+ .name = "pxa3xx-gcu",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_gcu),
+ .resource = pxa3xx_resources_gcu,
+ .dev = {
+ .dma_mask = &pxa3xx_gcu_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+#endif /* CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+static struct resource pxa3xx_resources_i2c_power[] = {
+ {
+ .start = 0x40f500c0,
+ .end = 0x40f500d3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+ .name = "pxa3xx-pwri2c",
+ .id = 1,
+ .resource = pxa3xx_resources_i2c_power,
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
+};
+
static struct resource pxa3xx_resources_nand[] = {
[0] = {
.start = 0x43100000,
@@ -1027,33 +1016,45 @@
pxa_register_device(&pxa3xx_device_nand, info);
}
-static struct resource pxa3xx_resources_gcu[] = {
- {
- .start = 0x54000000,
- .end = 0x54000fff,
+static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa3xx_resource_ssp4[] = {
+ [0] = {
+ .start = 0x41a00000,
+ .end = 0x41a0003f,
.flags = IORESOURCE_MEM,
},
- {
- .start = IRQ_GCU,
- .end = IRQ_GCU,
+ [1] = {
+ .start = IRQ_SSP4,
+ .end = IRQ_SSP4,
.flags = IORESOURCE_IRQ,
},
-};
-
-static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_gcu = {
- .name = "pxa3xx-gcu",
- .id = -1,
- .num_resources = ARRAY_SIZE(pxa3xx_resources_gcu),
- .resource = pxa3xx_resources_gcu,
- .dev = {
- .dma_mask = &pxa3xx_gcu_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ [2] = {
+ /* DRCMR for RX */
+ .start = 2,
+ .end = 2,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ /* DRCMR for TX */
+ .start = 3,
+ .end = 3,
+ .flags = IORESOURCE_DMA,
},
};
-#endif /* CONFIG_PXA3xx */
+struct platform_device pxa3xx_device_ssp4 = {
+ /* PXA3xx SSP is basically equivalent to PXA27x */
+ .name = "pxa27x-ssp",
+ .id = 3,
+ .dev = {
+ .dma_mask = &pxa3xx_ssp4_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = pxa3xx_resource_ssp4,
+ .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
+};
+#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
* See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index ed0dbfdb..4cefd1d 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1300,7 +1300,7 @@
MACHINE_START(EM_X270, "Compulab EM-X270")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
@@ -1308,7 +1308,7 @@
MACHINE_START(EXEDA, "Compulab eXeda")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index b25690c..edca0a0 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -181,7 +181,7 @@
MACHINE_START(E330, "Toshiba e330")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
@@ -230,7 +230,7 @@
MACHINE_START(E350, "Toshiba e350")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
@@ -352,7 +352,7 @@
MACHINE_START(E400, "Toshiba e400")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
@@ -540,7 +540,7 @@
MACHINE_START(E740, "Toshiba e740")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
@@ -731,7 +731,7 @@
MACHINE_START(E750, "Toshiba e750")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
@@ -926,7 +926,7 @@
MACHINE_START(E800, "Toshiba e800")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 142c711..87cec0a 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -798,7 +798,7 @@
MACHINE_START(EZX_A780, "Motorola EZX A780")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
@@ -863,7 +863,7 @@
MACHINE_START(EZX_E680, "Motorola EZX E680")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
@@ -928,7 +928,7 @@
MACHINE_START(EZX_A1200, "Motorola EZX A1200")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
@@ -1118,7 +1118,7 @@
MACHINE_START(EZX_A910, "Motorola EZX A910")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
@@ -1183,7 +1183,7 @@
MACHINE_START(EZX_E6, "Motorola EZX E6")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
@@ -1222,7 +1222,7 @@
MACHINE_START(EZX_E2, "Motorola EZX E2")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 6451e9c..d6e15f7 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -28,6 +28,8 @@
#include <mach/reset.h>
#include <mach/gpio.h>
+#include <mach/smemc.h>
+#include <mach/pxa3xx-regs.h>
#include "generic.h"
@@ -35,9 +37,10 @@
{
if (cpu_is_pxa2xx())
pxa2xx_clear_reset_status(mask);
-
- if (cpu_is_pxa3xx())
- pxa3xx_clear_reset_status(mask);
+ else {
+ /* RESET_STATUS_* has a 1:1 mapping with ARSR */
+ ARSR = mask;
+ }
}
unsigned long get_clock_tick_rate(void)
@@ -71,47 +74,17 @@
EXPORT_SYMBOL(get_clk_frequency_khz);
/*
- * Return the current memory clock frequency in units of 10kHz
- */
-unsigned int get_memclk_frequency_10khz(void)
-{
- if (cpu_is_pxa25x())
- return pxa25x_get_memclk_frequency_10khz();
- else if (cpu_is_pxa27x())
- return pxa27x_get_memclk_frequency_10khz();
- return 0;
-}
-EXPORT_SYMBOL(get_memclk_frequency_10khz);
-
-/*
* Intel PXA2xx internal register mapping.
*
- * Note 1: not all PXA2xx variants implement all those addresses.
- *
- * Note 2: virtual 0xfffe0000-0xffffffff is reserved for the vector table
- * and cache flush area.
+ * Note: virtual 0xfffe0000-0xffffffff is reserved for the vector table
+ * and cache flush area.
*/
-static struct map_desc standard_io_desc[] __initdata = {
+static struct map_desc common_io_desc[] __initdata = {
{ /* Devs */
.virtual = 0xf2000000,
.pfn = __phys_to_pfn(0x40000000),
.length = 0x02000000,
.type = MT_DEVICE
- }, { /* Mem Ctl */
- .virtual = 0xf6000000,
- .pfn = __phys_to_pfn(0x48000000),
- .length = 0x00200000,
- .type = MT_DEVICE
- }, { /* Camera */
- .virtual = 0xfa000000,
- .pfn = __phys_to_pfn(0x50000000),
- .length = 0x00100000,
- .type = MT_DEVICE
- }, { /* IMem ctl */
- .virtual = 0xfe000000,
- .pfn = __phys_to_pfn(0x58000000),
- .length = 0x00100000,
- .type = MT_DEVICE
}, { /* UNCACHED_PHYS_0 */
.virtual = 0xff000000,
.pfn = __phys_to_pfn(0x00000000),
@@ -122,6 +95,5 @@
void __init pxa_map_io(void)
{
- iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
- get_clk_frequency_khz(1);
+ iotable_init(ARRAY_AND_SIZE(common_io_desc));
}
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 4b1ad27..6205dc9 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -20,7 +20,12 @@
#endif
extern void __init pxa27x_init_irq(void);
extern void __init pxa3xx_init_irq(void);
+extern void __init pxa95x_init_irq(void);
+
extern void __init pxa_map_io(void);
+extern void __init pxa25x_map_io(void);
+extern void __init pxa27x_map_io(void);
+extern void __init pxa3xx_map_io(void);
extern unsigned int get_clk_frequency_khz(int info);
@@ -32,18 +37,14 @@
#ifdef CONFIG_PXA25x
extern unsigned pxa25x_get_clk_frequency_khz(int);
-extern unsigned pxa25x_get_memclk_frequency_10khz(void);
#else
#define pxa25x_get_clk_frequency_khz(x) (0)
-#define pxa25x_get_memclk_frequency_10khz() (0)
#endif
#ifdef CONFIG_PXA27x
extern unsigned pxa27x_get_clk_frequency_khz(int);
-extern unsigned pxa27x_get_memclk_frequency_10khz(void);
#else
#define pxa27x_get_clk_frequency_khz(x) (0)
-#define pxa27x_get_memclk_frequency_10khz() (0)
#endif
#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
@@ -54,10 +55,8 @@
#ifdef CONFIG_PXA3xx
extern unsigned pxa3xx_get_clk_frequency_khz(int);
-extern void pxa3xx_clear_reset_status(unsigned int);
#else
#define pxa3xx_get_clk_frequency_khz(x) (0)
-static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
#endif
extern struct sysdev_class pxa_irq_sysclass;
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 1e2a9a1..6fd319e 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -225,7 +225,7 @@
MACHINE_START(GUMSTIX, "Gumstix")
.boot_params = 0xa0000100, /* match u-boot bi_boot_params */
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = gumstix_init,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 7057a1f..657db46 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -32,6 +32,7 @@
#include <mach/pxa25x.h>
#include <mach/h5000.h>
#include <mach/udc.h>
+#include <mach/smemc.h>
#include "generic.h"
@@ -172,11 +173,11 @@
static void fix_msc(void)
{
- MSC0 = 0x129c24f2;
- MSC1 = 0x7ff424fa;
- MSC2 = 0x7ff47ff4;
+ __raw_writel(0x129c24f2, MSC0);
+ __raw_writel(0x7ff424fa, MSC1);
+ __raw_writel(0x7ff47ff4, MSC2);
- MDREFR |= 0x02080000;
+ __raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
}
/*
@@ -202,7 +203,7 @@
MACHINE_START(H5400, "HP iPAQ H5000")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = h5000_init,
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index 01b7f07..e8603eb 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -160,7 +160,7 @@
MACHINE_START(HIMALAYA, "HTC Himalaya")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = himalaya_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 76d93a2..cacb21b 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -871,7 +871,7 @@
MACHINE_START(H4700, "HP iPAQ HX4700")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = HX4700_NR_IRQS,
.init_irq = pxa27x_init_irq,
.init_machine = hx4700_init,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index d51ee3d..ac6ee12 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -192,7 +192,7 @@
MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = icontrol_init
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index e773dce..dd40e4a 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -187,7 +187,7 @@
static void __init idp_map_io(void)
{
- pxa_map_io();
+ pxa25x_map_io();
iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
}
diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h
new file mode 100644
index 0000000..f4c0365
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/addr-map.h
@@ -0,0 +1,48 @@
+#ifndef __ASM_MACH_ADDR_MAP_H
+#define __ASM_MACH_ADDR_MAP_H
+
+/*
+ * Chip Selects
+ */
+#define PXA_CS0_PHYS 0x00000000
+#define PXA_CS1_PHYS 0x04000000
+#define PXA_CS2_PHYS 0x08000000
+#define PXA_CS3_PHYS 0x0C000000
+#define PXA_CS4_PHYS 0x10000000
+#define PXA_CS5_PHYS 0x14000000
+
+#define PXA300_CS0_PHYS 0x00000000 /* PXA300/PXA310 _only_ */
+#define PXA300_CS1_PHYS 0x30000000 /* PXA300/PXA310 _only_ */
+#define PXA3xx_CS2_PHYS 0x10000000
+#define PXA3xx_CS3_PHYS 0x14000000
+
+/*
+ * Peripheral Bus
+ */
+#define PERIPH_PHYS 0x40000000
+#define PERIPH_VIRT 0xf2000000
+#define PERIPH_SIZE 0x02000000
+
+/*
+ * Static Memory Controller (w/ SDRAM controls on PXA25x/PXA27x)
+ */
+#define PXA2XX_SMEMC_PHYS 0x48000000
+#define PXA3XX_SMEMC_PHYS 0x4a000000
+#define SMEMC_VIRT 0xf6000000
+#define SMEMC_SIZE 0x00100000
+
+/*
+ * Dynamic Memory Controller (only on PXA3xx)
+ */
+#define DMEMC_PHYS 0x48100000
+#define DMEMC_VIRT 0xf6100000
+#define DMEMC_SIZE 0x00100000
+
+/*
+ * Internal Memory Controller (PXA27x and later)
+ */
+#define IMEMC_PHYS 0x58000000
+#define IMEMC_VIRT 0xfe000000
+#define IMEMC_SIZE 0x00100000
+
+#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 561562b..7074e76 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -26,6 +26,8 @@
#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */
#define BALLOON3_FPGA_LENGTH 0x01000000
+#define BALLOON3_FPGA_SETnCLR (0x1000)
+
/* FPGA / CPLD registers for CF socket */
#define BALLOON3_CF_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
#define BALLOON3_CF_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
@@ -35,7 +37,7 @@
#define BALLOON3_NAND_BASE (PXA_CS4_PHYS + 0x00e00000)
#define BALLOON3_NAND_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
#define BALLOON3_NAND_CONTROL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
-#define BALLOON3_NAND_STAT_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NAND_STAT_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
#define BALLOON3_NAND_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
/* fpga/cpld interrupt control register */
@@ -174,7 +176,7 @@
#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
-#define BALLOON3_NR_IRQS (IRQ_BOARD_START + 4)
+#define BALLOON3_NR_IRQS (IRQ_BOARD_START + 16)
extern int balloon3_has(enum balloon3_features feature);
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 58dada1..388a96f 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -9,14 +9,14 @@
*/
enum {
- COLIBRI_PXA270_EVALBOARD = 0,
+ COLIBRI_EVALBOARD = 0,
COLIBRI_PXA270_INCOME,
};
-#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
-extern void colibri_pxa270_evalboard_init(void);
+#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
+extern void colibri_evalboard_init(void);
#else
-static inline void colibri_pxa270_evalboard_init(void) {}
+static inline void colibri_evalboard_init(void) {}
#endif
#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
@@ -59,5 +59,11 @@
#define GPIO0_COLIBRI_PXA270_SD_DETECT 0
#define GPIO113_COLIBRI_PXA270_TS_IRQ 113
+/* GPIO definitions for Colibri PXA300/310 */
+#define GPIO39_COLIBRI_PXA300_SD_DETECT 39
+
+/* GPIO definitions for Colibri PXA320 */
+#define GPIO28_COLIBRI_PXA320_SD_DETECT 28
+
#endif /* _COLIBRI_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 814f145..6957ba5 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -13,6 +13,8 @@
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
+#include <mach/addr-map.h>
+
/*
* Workarounds for at least 2 errata so far require this.
* The mapping is set in mach-pxa/generic.c.
@@ -193,14 +195,15 @@
#define __cpu_is_pxa935(id) (0)
#endif
-#ifdef CONFIG_CPU_PXA950
-#define __cpu_is_pxa950(id) \
- ({ \
+#ifdef CONFIG_CPU_PXA955
+#define __cpu_is_pxa955(id) \
+ ({ \
unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x697; \
- })
+ _id == 0x581 || _id == 0xc08 \
+ || _id == 0xb76; \
+ })
#else
-#define __cpu_is_pxa950(id) (0)
+#define __cpu_is_pxa955(id) (0)
#endif
#define cpu_is_pxa210() \
@@ -253,16 +256,15 @@
__cpu_is_pxa935(read_cpuid_id()); \
})
-#define cpu_is_pxa950() \
+#define cpu_is_pxa955() \
({ \
- __cpu_is_pxa950(read_cpuid_id()); \
- })
+ __cpu_is_pxa955(read_cpuid_id()); \
+ })
/*
* CPUID Core Generation Bit
* <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
- * == 0x3 for pxa300/pxa310/pxa320
*/
#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
#define __cpu_is_pxa2xx(id) \
@@ -277,8 +279,10 @@
#ifdef CONFIG_PXA3xx
#define __cpu_is_pxa3xx(id) \
({ \
- unsigned int _id = (id) >> 13 & 0x7; \
- _id == 0x3; \
+ __cpu_is_pxa300(id) \
+ || __cpu_is_pxa310(id) \
+ || __cpu_is_pxa320(id) \
+ || __cpu_is_pxa93x(id); \
})
#else
#define __cpu_is_pxa3xx(id) (0)
@@ -287,13 +291,22 @@
#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
#define __cpu_is_pxa93x(id) \
({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x683 || _id == 0x693; \
+ __cpu_is_pxa930(id) \
+ || __cpu_is_pxa935(id); \
})
#else
#define __cpu_is_pxa93x(id) (0)
#endif
+#ifdef CONFIG_PXA95x
+#define __cpu_is_pxa95x(id) \
+ ({ \
+ __cpu_is_pxa955(id); \
+ })
+#else
+#define __cpu_is_pxa95x(id) (0)
+#endif
+
#define cpu_is_pxa2xx() \
({ \
__cpu_is_pxa2xx(read_cpuid_id()); \
@@ -308,6 +321,12 @@
({ \
__cpu_is_pxa93x(read_cpuid_id()); \
})
+
+#define cpu_is_pxa95x() \
+ ({ \
+ __cpu_is_pxa95x(read_cpuid_id()); \
+ })
+
/*
* return current memory and LCD clock frequency in units of 10kHz
*/
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index d372caa..a4285fc 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -21,16 +21,14 @@
#define PXA_IRQ(x) (PXA_ISA_IRQ_NUM + (x))
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */
#define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */
-#define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI) */
-#define IRQ_USBH1 PXA_IRQ(3) /* USB Host interrupt 2 (non-OHCI) */
+#define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI,PXA27x) */
+#define IRQ_USBH1 PXA_IRQ(3) /* USB Host interrupt 2 (non-OHCI,PXA27x) */
#define IRQ_KEYPAD PXA_IRQ(4) /* Key pad controller */
-#define IRQ_MEMSTK PXA_IRQ(5) /* Memory Stick interrupt */
+#define IRQ_MEMSTK PXA_IRQ(5) /* Memory Stick interrupt (PXA27x) */
+#define IRQ_ACIPC0 PXA_IRQ(5) /* AP-CP Communication (PXA930) */
#define IRQ_PWRI2C PXA_IRQ(6) /* Power I2C interrupt */
-#endif
-
#define IRQ_HWUART PXA_IRQ(7) /* HWUART Transmit/Receive/Error (PXA26x) */
#define IRQ_OST_4_11 PXA_IRQ(7) /* OS timer 4-11 matches (PXA27x) */
#define IRQ_GPIO0 PXA_IRQ(8) /* GPIO0 Edge Detect */
@@ -38,7 +36,8 @@
#define IRQ_GPIO_2_x PXA_IRQ(10) /* GPIO[2-x] Edge Detect */
#define IRQ_USB PXA_IRQ(11) /* USB Service */
#define IRQ_PMU PXA_IRQ(12) /* Performance Monitoring Unit */
-#define IRQ_I2S PXA_IRQ(13) /* I2S Interrupt */
+#define IRQ_I2S PXA_IRQ(13) /* I2S Interrupt (PXA27x) */
+#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request (PXA3xx) */
#define IRQ_AC97 PXA_IRQ(14) /* AC97 Interrupt */
#define IRQ_ASSP PXA_IRQ(15) /* Audio SSP Service Request (PXA25x) */
#define IRQ_USIM PXA_IRQ(15) /* Smart Card interface interrupt (PXA27x) */
@@ -47,6 +46,7 @@
#define IRQ_LCD PXA_IRQ(17) /* LCD Controller Service Request */
#define IRQ_I2C PXA_IRQ(18) /* I2C Service Request */
#define IRQ_ICP PXA_IRQ(19) /* ICP Transmit/Receive/Error */
+#define IRQ_ACIPC2 PXA_IRQ(19) /* AP-CP Communication (PXA930) */
#define IRQ_STUART PXA_IRQ(20) /* STUART Transmit/Receive/Error */
#define IRQ_BTUART PXA_IRQ(21) /* BTUART Transmit/Receive/Error */
#define IRQ_FFUART PXA_IRQ(22) /* FFUART Transmit/Receive/Error*/
@@ -60,19 +60,17 @@
#define IRQ_RTC1Hz PXA_IRQ(30) /* RTC HZ Clock Tick */
#define IRQ_RTCAlrm PXA_IRQ(31) /* RTC Alarm */
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define IRQ_TPM PXA_IRQ(32) /* TPM interrupt */
#define IRQ_CAMERA PXA_IRQ(33) /* Camera Interface */
-#endif
-
-#ifdef CONFIG_PXA3xx
-#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */
#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */
#define IRQ_COMM_WDT PXA_IRQ(35) /* Comm WDT interrupt */
#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */
+#define IRQ_ENHROT PXA_IRQ(37) /* Enhanced Rotary (PXA930) */
#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */
-#define IRQ_GCU PXA_IRQ(39) /* Graphics Controller */
+#define IRQ_GCU PXA_IRQ(39) /* Graphics Controller (PXA3xx) */
+#define IRQ_ACIPC1 PXA_IRQ(40) /* AP-CP Communication (PXA930) */
#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */
+#define IRQ_TRKBALL PXA_IRQ(43) /* Track Ball (PXA930) */
#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */
#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */
#define IRQ_USB2 PXA_IRQ(46) /* USB 2.0 Device Controller */
@@ -80,30 +78,14 @@
#define IRQ_WAKEUP1 PXA_IRQ(50) /* EXT_WAKEUP1 */
#define IRQ_DMEMC PXA_IRQ(51) /* Dynamic Memory Controller */
#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */
-#endif
-#ifdef CONFIG_CPU_PXA935
#define IRQ_U2O PXA_IRQ(64) /* USB OTG 2.0 Controller (PXA935) */
#define IRQ_U2H PXA_IRQ(65) /* USB Host 2.0 Controller (PXA935) */
-
-#define IRQ_MMC3_PXA935 PXA_IRQ(72) /* MMC3 Controller (PXA935) */
-#define IRQ_MMC4_PXA935 PXA_IRQ(73) /* MMC4 Controller (PXA935) */
-#define IRQ_MMC5_PXA935 PXA_IRQ(74) /* MMC5 Controller (PXA935) */
-
+#define IRQ_PXA935_MMC0 PXA_IRQ(72) /* MMC0 Controller (PXA935) */
+#define IRQ_PXA935_MMC1 PXA_IRQ(73) /* MMC1 Controller (PXA935) */
+#define IRQ_PXA935_MMC2 PXA_IRQ(74) /* MMC2 Controller (PXA935) */
+#define IRQ_PXA955_MMC3 PXA_IRQ(75) /* MMC3 Controller (PXA955) */
#define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */
-#endif
-
-#ifdef CONFIG_CPU_PXA930
-#define IRQ_ENHROT PXA_IRQ(37) /* Enhanced Rotary (PXA930) */
-#define IRQ_ACIPC0 PXA_IRQ(5)
-#define IRQ_ACIPC1 PXA_IRQ(40)
-#define IRQ_ACIPC2 PXA_IRQ(19)
-#define IRQ_TRKBALL PXA_IRQ(43) /* Track Ball */
-#endif
-
-#ifdef CONFIG_CPU_PXA950
-#define IRQ_GC500 PXA_IRQ(70) /* Graphics Controller (PXA950) */
-#endif
#define PXA_GPIO_IRQ_BASE PXA_IRQ(96)
#define PXA_GPIO_IRQ_NUM (192)
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 4fcddd9..ee6ced1 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -17,72 +17,6 @@
#include <mach/hardware.h>
/*
- * PXA Chip selects
- */
-
-#define PXA_CS0_PHYS 0x00000000
-#define PXA_CS1_PHYS 0x04000000
-#define PXA_CS2_PHYS 0x08000000
-#define PXA_CS3_PHYS 0x0C000000
-#define PXA_CS4_PHYS 0x10000000
-#define PXA_CS5_PHYS 0x14000000
-
-/*
- * Memory controller
- */
-
-#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */
-#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */
-#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */
-#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */
-#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */
-#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */
-#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
-#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
-
-/*
- * More handy macros for PCMCIA
- *
- * Arg is socket number
- */
-#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */
-#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */
-#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */
-
-/* MECR register defines */
-#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
-#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
-
-#define MDCNFG_DE0 (1 << 0) /* SDRAM Bank 0 Enable */
-#define MDCNFG_DE1 (1 << 1) /* SDRAM Bank 1 Enable */
-#define MDCNFG_DE2 (1 << 16) /* SDRAM Bank 2 Enable */
-#define MDCNFG_DE3 (1 << 17) /* SDRAM Bank 3 Enable */
-
-#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
-#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
-#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
-#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
-#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
-#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
-#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
-#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
-#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
-#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
-#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
-#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
-#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
-#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
-
-/*
* Power Manager
*/
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index e91d63c..e4fb4668 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -16,15 +16,6 @@
#include <mach/hardware.h>
/*
- * Static Chip Selects
- */
-
-#define PXA300_CS0_PHYS (0x00000000) /* PXA300/PXA310 _only_ */
-#define PXA300_CS1_PHYS (0x30000000) /* PXA300/PXA310 _only_ */
-#define PXA3xx_CS2_PHYS (0x10000000)
-#define PXA3xx_CS3_PHYS (0x14000000)
-
-/*
* Oscillator Configuration Register (OSCC)
*/
#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */
diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
index 68464ce..662288e 100644
--- a/arch/arm/mach-pxa/include/mach/regs-intc.h
+++ b/arch/arm/mach-pxa/include/mach/regs-intc.h
@@ -27,8 +27,4 @@
#define ICFP3 __REG(0x40D0013C) /* Interrupt Controller FIQ Pending Register 3 */
#define ICPR3 __REG(0x40D00140) /* Interrupt Controller Pending Register 3 */
-#define IPR(x) __REG(0x40D0001C + (x < 32 ? (x << 2) \
- : (x < 64 ? (0x94 + ((x - 32) << 2)) \
- : (0x128 + ((x - 64) << 2)))))
-
#endif /* __ASM_MACH_REGS_INTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h
new file mode 100644
index 0000000..654adc9
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/smemc.h
@@ -0,0 +1,74 @@
+/*
+ * Static memory controller register definitions for PXA CPUs
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SMEMC_REGS_H
+#define __SMEMC_REGS_H
+
+#define PXA2XX_SMEMC_BASE 0x48000000
+#define PXA3XX_SMEMC_BASE 0x4a000000
+#define SMEMC_VIRT 0xf6000000
+
+#define MDCNFG (SMEMC_VIRT + 0x00) /* SDRAM Configuration Register 0 */
+#define MDREFR (SMEMC_VIRT + 0x04) /* SDRAM Refresh Control Register */
+#define MSC0 (SMEMC_VIRT + 0x08) /* Static Memory Control Register 0 */
+#define MSC1 (SMEMC_VIRT + 0x0C) /* Static Memory Control Register 1 */
+#define MSC2 (SMEMC_VIRT + 0x10) /* Static Memory Control Register 2 */
+#define MECR (SMEMC_VIRT + 0x14) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR (SMEMC_VIRT + 0x18) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG (SMEMC_VIRT + 0x1C) /* Synchronous Static Memory Control Register */
+#define SXMRS (SMEMC_VIRT + 0x24) /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0 (SMEMC_VIRT + 0x28) /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1 (SMEMC_VIRT + 0x2C) /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0 (SMEMC_VIRT + 0x30) /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1 (SMEMC_VIRT + 0x34) /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0 (SMEMC_VIRT + 0x38) /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1 (SMEMC_VIRT + 0x3C) /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS (SMEMC_VIRT + 0x40) /* MRS value to be written to SDRAM */
+#define BOOT_DEF (SMEMC_VIRT + 0x44) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+#define MEMCLKCFG (SMEMC_VIRT + 0x68) /* Clock Configuration */
+#define CSADRCFG0 (SMEMC_VIRT + 0x80) /* Address Configuration Register for CS0 */
+#define CSADRCFG1 (SMEMC_VIRT + 0x84) /* Address Configuration Register for CS1 */
+#define CSADRCFG2 (SMEMC_VIRT + 0x88) /* Address Configuration Register for CS2 */
+#define CSADRCFG3 (SMEMC_VIRT + 0x8C) /* Address Configuration Register for CS3 */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s) (SMEMC_VIRT + 0x28 + ((s)<<2)) /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s) (SMEMC_VIRT + 0x30 + ((s)<<2)) /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s) (SMEMC_VIRT + 0x38 + ((s)<<2)) /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDCNFG_DE0 (1 << 0) /* SDRAM Bank 0 Enable */
+#define MDCNFG_DE1 (1 << 1) /* SDRAM Bank 1 Enable */
+#define MDCNFG_DE2 (1 << 16) /* SDRAM Bank 2 Enable */
+#define MDCNFG_DE3 (1 << 17) /* SDRAM Bank 3 Enable */
+
+#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
+#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
+#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
+
+#endif
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 1beb40f..54e91c9 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -16,20 +16,31 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
+#include <linux/irq.h>
#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
+#include <mach/irqs.h>
#include <mach/gpio.h>
-#include <mach/regs-intc.h>
#include "generic.h"
-#define MAX_INTERNAL_IRQS 128
+#define IRQ_BASE (void __iomem *)io_p2v(0x40d00000)
-#define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f)
-#define _ICMR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR))
-#define _ICLR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR))
+#define ICIP (0x000)
+#define ICMR (0x004)
+#define ICLR (0x008)
+#define ICFR (0x00c)
+#define ICPR (0x010)
+#define ICCR (0x014)
+#define ICHP (0x018)
+#define IPR(i) (((i) < 32) ? (0x01c + ((i) << 2)) : \
+ ((i) < 64) ? (0x0b0 + (((i) - 32) << 2)) : \
+ (0x144 + (((i) - 64) << 2)))
+#define IPR_VALID (1 << 31)
+#define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f)
+
+#define MAX_INTERNAL_IRQS 128
/*
* This is for peripheral IRQs internal to the PXA chip.
@@ -37,14 +48,27 @@
static int pxa_internal_irq_nr;
+static inline int cpu_has_ipr(void)
+{
+ return !cpu_is_pxa25x();
+}
+
static void pxa_mask_irq(unsigned int irq)
{
- _ICMR(irq) &= ~(1 << IRQ_BIT(irq));
+ void __iomem *base = get_irq_chip_data(irq);
+ uint32_t icmr = __raw_readl(base + ICMR);
+
+ icmr &= ~(1 << IRQ_BIT(irq));
+ __raw_writel(icmr, base + ICMR);
}
static void pxa_unmask_irq(unsigned int irq)
{
- _ICMR(irq) |= 1 << IRQ_BIT(irq);
+ void __iomem *base = get_irq_chip_data(irq);
+ uint32_t icmr = __raw_readl(base + ICMR);
+
+ icmr |= 1 << IRQ_BIT(irq);
+ __raw_writel(icmr, base + ICMR);
}
static struct irq_chip pxa_internal_irq_chip = {
@@ -86,12 +110,16 @@
static void pxa_mask_low_gpio(unsigned int irq)
{
- ICMR &= ~(1 << (irq - PXA_IRQ(0)));
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ desc->chip->mask(irq);
}
static void pxa_unmask_low_gpio(unsigned int irq)
{
- ICMR |= 1 << (irq - PXA_IRQ(0));
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ desc->chip->unmask(irq);
}
static struct irq_chip pxa_low_gpio_chip = {
@@ -120,33 +148,45 @@
pxa_low_gpio_chip.set_wake = fn;
}
+static inline void __iomem *irq_base(int i)
+{
+ static unsigned long phys_base[] = {
+ 0x40d00000,
+ 0x40d0009c,
+ 0x40d00130,
+ };
+
+ return (void __iomem *)io_p2v(phys_base[i >> 5]);
+}
+
void __init pxa_init_irq(int irq_nr, set_wake_t fn)
{
- int irq, i;
+ int irq, i, n;
BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
pxa_internal_irq_nr = irq_nr;
- for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
- _ICMR(irq) = 0; /* disable all IRQs */
- _ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */
- }
+ for (n = 0; n < irq_nr; n += 32) {
+ void __iomem *base = irq_base(n);
- /* initialize interrupt priority */
- if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
- for (i = 0; i < irq_nr; i++)
- IPR(i) = i | (1 << 31);
+ __raw_writel(0, base + ICMR); /* disable all IRQs */
+ __raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */
+ for (i = n; (i < (n + 32)) && (i < irq_nr); i++) {
+ /* initialize interrupt priority */
+ if (cpu_has_ipr())
+ __raw_writel(i | IPR_VALID, IRQ_BASE + IPR(i));
+
+ irq = PXA_IRQ(i);
+ set_irq_chip(irq, &pxa_internal_irq_chip);
+ set_irq_chip_data(irq, base);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
}
/* only unmasked interrupts kick us out of idle */
- ICCR = 1;
-
- for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq++) {
- set_irq_chip(irq, &pxa_internal_irq_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
+ __raw_writel(1, irq_base(0) + ICCR);
pxa_internal_irq_chip.set_wake = fn;
pxa_init_low_gpio_irq(fn);
@@ -158,16 +198,18 @@
static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
{
- int i, irq = PXA_IRQ(0);
+ int i;
- for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
- saved_icmr[i] = _ICMR(irq);
- _ICMR(irq) = 0;
+ for (i = 0; i < pxa_internal_irq_nr; i += 32) {
+ void __iomem *base = irq_base(i);
+
+ saved_icmr[i] = __raw_readl(base + ICMR);
+ __raw_writel(0, base + ICMR);
}
- if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+ if (cpu_has_ipr()) {
for (i = 0; i < pxa_internal_irq_nr; i++)
- saved_ipr[i] = IPR(i);
+ saved_ipr[i] = __raw_readl(IRQ_BASE + IPR(i));
}
return 0;
@@ -175,19 +217,20 @@
static int pxa_irq_resume(struct sys_device *dev)
{
- int i, irq = PXA_IRQ(0);
+ int i;
- if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+ for (i = 0; i < pxa_internal_irq_nr; i += 32) {
+ void __iomem *base = irq_base(i);
+
+ __raw_writel(saved_icmr[i], base + ICMR);
+ __raw_writel(0, base + ICLR);
+ }
+
+ if (!cpu_is_pxa25x())
for (i = 0; i < pxa_internal_irq_nr; i++)
- IPR(i) = saved_ipr[i];
- }
+ __raw_writel(saved_ipr[i], IRQ_BASE + IPR(i));
- for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
- _ICMR(irq) = saved_icmr[i];
- _ICLR(irq) = 0;
- }
-
- ICCR = 1;
+ __raw_writel(1, IRQ_BASE + ICCR);
return 0;
}
#else
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 41aa89e..719c260 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -438,7 +438,7 @@
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.nr_irqs = LITTLETON_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 623af02..8ab62a6 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -46,6 +46,7 @@
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
@@ -463,7 +464,7 @@
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+ lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
lpd270_flash_data[1].width = 4;
/*
@@ -495,7 +496,7 @@
static void __init lpd270_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
/* for use I SRAM as framebuffer. */
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1499493..d337548 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -50,6 +50,7 @@
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/pm.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "clock.h"
@@ -525,7 +526,7 @@
pxa_set_ac97_info(NULL);
lubbock_flash_data[0].width = lubbock_flash_data[1].width =
- (BOOT_DEF & 1) ? 2 : 4;
+ (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
/* Compensate for the nROMBT switch which swaps the flash banks */
printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
flashboot?"Flash":"ROM", flashboot);
@@ -549,7 +550,7 @@
static void __init lubbock_map_io(void)
{
- pxa_map_io();
+ pxa25x_map_io();
iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
PCFR |= PCFR_OPDE;
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 9066376..41198f0 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -765,7 +765,7 @@
MACHINE_START(MAGICIAN, "HTC Magician")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = MAGICIAN_NR_IRQS,
.init_irq = pxa27x_init_irq,
.init_machine = magician_init,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a980a5c..740c035 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -51,6 +51,7 @@
#include <mach/irda.h>
#include <mach/ohci.h>
#include <plat/pxa27x_keypad.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
@@ -565,7 +566,7 @@
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+ mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
mst_flash_data[1].width = 4;
/* Compensate for SW7 which swaps the flash banks */
@@ -614,7 +615,7 @@
static void __init mainstone_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
/* for use I SRAM as framebuffer. */
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index f5fb915..faafea3 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -819,7 +819,7 @@
MACHINE_START(MIOA701, "MIO A701")
.boot_params = 0xa0000100,
- .map_io = &pxa_map_io,
+ .map_io = &pxa27x_map_io,
.init_irq = &pxa27x_init_irq,
.init_machine = mioa701_machine_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 116167aa..59cce78 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -94,7 +94,7 @@
MACHINE_START(NEC_MP900, "MobilePro900/C")
.boot_params = 0xa0220100,
.timer = &pxa_timer,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = mp900c_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index ce092c5..a6f898c 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -313,7 +313,7 @@
static void __init palmld_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
}
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 862da81..df4d7d0 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -203,7 +203,7 @@
MACHINE_START(PALMT5, "Palm Tungsten|T5")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.reserve = palmt5_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 2131d58..a09a237 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -25,6 +25,7 @@
#include <linux/power_supply.h>
#include <linux/gpio_keys.h>
#include <linux/mtd/physmap.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -116,6 +117,7 @@
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data palmtc_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_power = GPIO_NR_PALMTC_SD_POWER,
@@ -124,9 +126,18 @@
.detect_delay_ms = 200,
};
+static void __init palmtc_mmc_init(void)
+{
+ pxa_set_mci_info(&palmtc_mci_platform_data);
+}
+#else
+static inline void palmtc_mmc_init(void) {}
+#endif
+
/******************************************************************************
* GPIO keys
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button palmtc_pxa_buttons[] = {
{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
};
@@ -144,9 +155,18 @@
},
};
+static void __init palmtc_keys_init(void)
+{
+ platform_device_register(&palmtc_pxa_keys);
+}
+#else
+static inline void palmtc_keys_init(void) {}
+#endif
+
/******************************************************************************
* Backlight
******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
static int palmtc_backlight_init(struct device *dev)
{
int ret;
@@ -196,17 +216,35 @@
},
};
+static void __init palmtc_pwm_init(void)
+{
+ platform_device_register(&palmtc_backlight);
+}
+#else
+static inline void palmtc_pwm_init(void) {}
+#endif
+
/******************************************************************************
* IrDA
******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
static struct pxaficp_platform_data palmtc_ficp_platform_data = {
.gpio_pwdown = GPIO_NR_PALMTC_IR_DISABLE,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
+static void __init palmtc_irda_init(void)
+{
+ pxa_set_ficp_info(&palmtc_ficp_platform_data);
+}
+#else
+static inline void palmtc_irda_init(void) {}
+#endif
+
/******************************************************************************
* Keyboard
******************************************************************************/
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
static const uint32_t palmtc_matrix_keys[] = {
KEY(0, 0, KEY_F1),
KEY(0, 1, KEY_X),
@@ -290,27 +328,103 @@
.platform_data = &palmtc_keypad_platform_data,
},
};
+static void __init palmtc_mkp_init(void)
+{
+ platform_device_register(&palmtc_keyboard);
+}
+#else
+static inline void palmtc_mkp_init(void) {}
+#endif
/******************************************************************************
* UDC
******************************************************************************/
-static struct pxa2xx_udc_mach_info palmtc_udc_info __initdata = {
+#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE)
+static struct gpio_vbus_mach_info palmtc_udc_info = {
.gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N,
.gpio_vbus_inverted = 1,
.gpio_pullup = GPIO_NR_PALMTC_USB_POWER,
};
+static struct platform_device palmtc_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtc_udc_info,
+ },
+};
+
+static void __init palmtc_udc_init(void)
+{
+ platform_device_register(&palmtc_gpio_vbus);
+};
+#else
+static inline void palmtc_udc_init(void) {}
+#endif
+
/******************************************************************************
* Touchscreen / Battery / GPIO-extender
******************************************************************************/
-static struct platform_device palmtc_ucb1400_core = {
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct platform_device palmtc_ucb1400_device = {
.name = "ucb1400_core",
.id = -1,
};
+static void __init palmtc_ts_init(void)
+{
+ pxa_set_ac97_info(NULL);
+ platform_device_register(&palmtc_ucb1400_device);
+}
+#else
+static inline void palmtc_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led palmtc_gpio_leds[] = {
+{
+ .name = "palmtc:green:user",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMTC_LED_POWER,
+ .active_low = 1,
+}, {
+ .name = "palmtc:vibra:vibra",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMTC_VIBRA_POWER,
+ .active_low = 1,
+}
+
+};
+
+static struct gpio_led_platform_data palmtc_gpio_led_info = {
+ .leds = palmtc_gpio_leds,
+ .num_leds = ARRAY_SIZE(palmtc_gpio_leds),
+};
+
+static struct platform_device palmtc_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtc_gpio_led_info,
+ }
+};
+
+static void __init palmtc_leds_init(void)
+{
+ platform_device_register(&palmtc_leds);
+}
+#else
+static inline void palmtc_leds_init(void) {}
+#endif
+
/******************************************************************************
* NOR Flash
******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct resource palmtc_flash_resource = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_16M - 1,
@@ -356,24 +470,33 @@
},
};
+static void __init palmtc_nor_init(void)
+{
+ platform_device_register(&palmtc_flash);
+}
+#else
+static inline void palmtc_nor_init(void) {}
+#endif
+
/******************************************************************************
* Framebuffer
******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info palmtc_lcd_modes[] = {
-{
- .pixclock = 115384,
- .xres = 320,
- .yres = 320,
- .bpp = 16,
+ {
+ .pixclock = 115384,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
- .left_margin = 27,
- .right_margin = 7,
- .upper_margin = 7,
- .lower_margin = 8,
+ .left_margin = 27,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 8,
- .hsync_len = 6,
- .vsync_len = 1,
-},
+ .hsync_len = 6,
+ .vsync_len = 1,
+ },
};
static struct pxafb_mach_info palmtc_lcd_screen = {
@@ -382,17 +505,17 @@
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
+static void __init palmtc_lcd_init(void)
+{
+ set_pxa_fb_info(&palmtc_lcd_screen);
+}
+#else
+static inline void palmtc_lcd_init(void) {}
+#endif
+
/******************************************************************************
* Machine init
******************************************************************************/
-static struct platform_device *devices[] __initdata = {
- &palmtc_backlight,
- &palmtc_ucb1400_core,
- &palmtc_keyboard,
- &palmtc_pxa_keys,
- &palmtc_flash,
-};
-
static void __init palmtc_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
@@ -402,18 +525,21 @@
pxa_set_stuart_info(NULL);
pxa_set_hwuart_info(NULL);
- set_pxa_fb_info(&palmtc_lcd_screen);
- pxa_set_mci_info(&palmtc_mci_platform_data);
- pxa_set_udc_info(&palmtc_udc_info);
- pxa_set_ac97_info(NULL);
- pxa_set_ficp_info(&palmtc_ficp_platform_data);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ palmtc_mmc_init();
+ palmtc_keys_init();
+ palmtc_pwm_init();
+ palmtc_irda_init();
+ palmtc_mkp_init();
+ palmtc_udc_init();
+ palmtc_ts_init();
+ palmtc_nor_init();
+ palmtc_lcd_init();
+ palmtc_leds_init();
};
MACHINE_START(PALMTC, "Palm Tungsten|C")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = palmtc_init
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index a9dae7b..3f25014 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -374,7 +374,7 @@
MACHINE_START(PALMTE2, "Palm Tungsten|E2")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = palmte2_init
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 00e2d7b..8aadad5 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -442,7 +442,7 @@
MACHINE_START(TREO680, "Palm Treo 680")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
@@ -451,7 +451,7 @@
MACHINE_START(CENTRO, "Palm Centro 685")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index d2060a1..595f002 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -241,7 +241,8 @@
/******************************************************************************
* NAND Flash
******************************************************************************/
-#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+ defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
@@ -333,7 +334,7 @@
static void __init palmtx_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
}
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index af6203f..7bf4017 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -280,7 +280,7 @@
MACHINE_START(PALMZ72, "Palm Zire72")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = palmz72_init
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index c77e8f3..8547c9a 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -244,7 +244,7 @@
static void __init pcm027_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
/* initialize sleep mode regs (wake-up sources, etc) */
PGSR0 = 0x01308000;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 93a191c..8451790 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -466,7 +466,7 @@
MACHINE_START(POODLE, "SHARP Poodle")
.fixup = fixup_poodle,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index de53f2e..3f5241c 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -23,6 +23,7 @@
#include <linux/suspend.h>
#include <linux/sysdev.h>
+#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
@@ -30,6 +31,7 @@
#include <mach/reset.h>
#include <mach/pm.h>
#include <mach/dma.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
@@ -90,23 +92,21 @@
return (turbo & 1) ? (N/1000) : (M/1000);
}
-/*
- * Return the current memory clock frequency in units of 10kHz
- */
-unsigned int pxa25x_get_memclk_frequency_10khz(void)
+static unsigned long clk_pxa25x_mem_getrate(struct clk *clk)
{
- return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK / 10000;
+ return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK;
}
-static unsigned long clk_pxa25x_lcd_getrate(struct clk *clk)
-{
- return pxa25x_get_memclk_frequency_10khz() * 10000;
-}
+static const struct clkops clk_pxa25x_mem_ops = {
+ .enable = clk_dummy_enable,
+ .disable = clk_dummy_disable,
+ .getrate = clk_pxa25x_mem_getrate,
+};
static const struct clkops clk_pxa25x_lcd_ops = {
- .enable = clk_cken_enable,
- .disable = clk_cken_disable,
- .getrate = clk_pxa25x_lcd_getrate,
+ .enable = clk_pxa2xx_cken_enable,
+ .disable = clk_pxa2xx_cken_disable,
+ .getrate = clk_pxa25x_mem_getrate,
};
static unsigned long gpio12_config_32k[] = {
@@ -160,31 +160,30 @@
* 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
* 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
*/
-static DEFINE_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
-
-static struct clk_lookup pxa25x_hwuart_clkreg =
- INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
/*
* PXA 2xx clock declarations.
*/
+static DEFINE_PXA2_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_stuart, STUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_usb, USB, 47923000, 5);
+static DEFINE_PXA2_CKEN(pxa25x_mmc, MMC, 19169000, 0);
+static DEFINE_PXA2_CKEN(pxa25x_i2c, I2C, 31949000, 0);
+static DEFINE_PXA2_CKEN(pxa25x_ssp, SSP, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_assp, ASSP, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_ac97, AC97, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa25x_i2s, I2S, 14745600, 0);
+static DEFINE_PXA2_CKEN(pxa25x_ficp, FICP, 47923000, 0);
+
static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops);
-static DEFINE_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
-static DEFINE_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
-static DEFINE_CKEN(pxa25x_stuart, STUART, 14745600, 1);
-static DEFINE_CKEN(pxa25x_usb, USB, 47923000, 5);
static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0);
static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0);
-static DEFINE_CKEN(pxa25x_mmc, MMC, 19169000, 0);
-static DEFINE_CKEN(pxa25x_i2c, I2C, 31949000, 0);
-static DEFINE_CKEN(pxa25x_ssp, SSP, 3686400, 0);
-static DEFINE_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
-static DEFINE_CKEN(pxa25x_assp, ASSP, 3686400, 0);
-static DEFINE_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
-static DEFINE_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
-static DEFINE_CKEN(pxa25x_ac97, AC97, 24576000, 0);
-static DEFINE_CKEN(pxa25x_i2s, I2S, 14745600, 0);
-static DEFINE_CKEN(pxa25x_ficp, FICP, 47923000, 0);
+static DEFINE_CLK(pxa25x_mem, &clk_pxa25x_mem_ops, 0, 0);
static struct clk_lookup pxa25x_clkregs[] = {
INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL),
@@ -205,8 +204,12 @@
INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"),
INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
+ INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
};
+static struct clk_lookup pxa25x_hwuart_clkreg =
+ INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
+
#ifdef CONFIG_PM
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
@@ -219,20 +222,17 @@
*/
enum {
SLEEP_SAVE_PSTR,
- SLEEP_SAVE_CKEN,
SLEEP_SAVE_COUNT
};
static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
{
- SAVE(CKEN);
SAVE(PSTR);
}
static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
{
- RESTORE(CKEN);
RESTORE(PSTR);
}
@@ -320,6 +320,22 @@
}
#endif
+static struct map_desc pxa25x_io_desc[] __initdata = {
+ { /* Mem Ctl */
+ .virtual = SMEMC_VIRT,
+ .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
+ .length = 0x00200000,
+ .type = MT_DEVICE
+ },
+};
+
+void __init pxa25x_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(ARRAY_AND_SIZE(pxa25x_io_desc));
+ pxa25x_get_clk_frequency_khz(1);
+}
+
static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_udc,
&pxa_device_pmu,
@@ -339,7 +355,9 @@
.cls = &pxa2xx_mfp_sysclass,
}, {
.cls = &pxa_gpio_sysclass,
- },
+ }, {
+ .cls = &pxa2xx_clock_sysclass,
+ }
};
static int __init pxa25x_init(void)
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d1fbf29..b2130b7 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -17,7 +17,9 @@
#include <linux/suspend.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
+#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/irqs.h>
@@ -27,6 +29,8 @@
#include <mach/ohci.h>
#include <mach/pm.h>
#include <mach/dma.h>
+#include <mach/smemc.h>
+
#include <plat/i2c.h>
#include "generic.h"
@@ -107,10 +111,9 @@
}
/*
- * Return the current mem clock frequency in units of 10kHz as
- * reflected by CCCR[A], B, and L
+ * Return the current mem clock frequency as reflected by CCCR[A], B, and L
*/
-unsigned int pxa27x_get_memclk_frequency_10khz(void)
+static unsigned long clk_pxa27x_mem_getrate(struct clk *clk)
{
unsigned long ccsr, clkcfg;
unsigned int l, L, m, M;
@@ -129,9 +132,15 @@
L = l * BASE_CLK;
M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
- return (M / 10000);
+ return M;
}
+static const struct clkops clk_pxa27x_mem_ops = {
+ .enable = clk_dummy_enable,
+ .disable = clk_dummy_disable,
+ .getrate = clk_pxa27x_mem_getrate,
+};
+
/*
* Return the current LCD clock frequency in units of 10kHz as
*/
@@ -157,36 +166,38 @@
}
static const struct clkops clk_pxa27x_lcd_ops = {
- .enable = clk_cken_enable,
- .disable = clk_cken_disable,
+ .enable = clk_pxa2xx_cken_enable,
+ .disable = clk_pxa2xx_cken_disable,
.getrate = clk_pxa27x_lcd_getrate,
};
+static DEFINE_PXA2_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_stuart, STUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_i2s, I2S, 14682000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_i2c, I2C, 32842000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usb, USB, 48000000, 5);
+static DEFINE_PXA2_CKEN(pxa27x_mmc, MMC, 19500000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ficp, FICP, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ac97, AC97, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_msl, MSL, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usim, USIM, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_im, IM, 0, 0);
+static DEFINE_PXA2_CKEN(pxa27x_memc, MEMC, 0, 0);
+
static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops);
static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops);
-static DEFINE_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
-static DEFINE_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
-static DEFINE_CKEN(pxa27x_stuart, STUART, 14857000, 1);
-static DEFINE_CKEN(pxa27x_i2s, I2S, 14682000, 0);
-static DEFINE_CKEN(pxa27x_i2c, I2C, 32842000, 0);
-static DEFINE_CKEN(pxa27x_usb, USB, 48000000, 5);
-static DEFINE_CKEN(pxa27x_mmc, MMC, 19500000, 0);
-static DEFINE_CKEN(pxa27x_ficp, FICP, 48000000, 0);
-static DEFINE_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
-static DEFINE_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
-static DEFINE_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
-static DEFINE_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
-static DEFINE_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
-static DEFINE_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
-static DEFINE_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
-static DEFINE_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
-static DEFINE_CKEN(pxa27x_ac97, AC97, 24576000, 0);
-static DEFINE_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
-static DEFINE_CKEN(pxa27x_msl, MSL, 48000000, 0);
-static DEFINE_CKEN(pxa27x_usim, USIM, 48000000, 0);
-static DEFINE_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
-static DEFINE_CKEN(pxa27x_im, IM, 0, 0);
-static DEFINE_CKEN(pxa27x_memc, MEMC, 0, 0);
+static DEFINE_CLK(pxa27x_mem, &clk_pxa27x_mem_ops, 0, 0);
static struct clk_lookup pxa27x_clkregs[] = {
INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL),
@@ -215,6 +226,7 @@
INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"),
INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
+ INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
};
#ifdef CONFIG_PM
@@ -246,7 +258,6 @@
*/
enum {
SLEEP_SAVE_PSTR,
- SLEEP_SAVE_CKEN,
SLEEP_SAVE_MDREFR,
SLEEP_SAVE_PCFR,
SLEEP_SAVE_COUNT
@@ -254,21 +265,19 @@
void pxa27x_cpu_pm_save(unsigned long *sleep_save)
{
- SAVE(MDREFR);
+ sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
SAVE(PCFR);
- SAVE(CKEN);
SAVE(PSTR);
}
void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
{
- RESTORE(MDREFR);
+ __raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
RESTORE(PCFR);
PSSR = PSSR_RDH | PSSR_PH;
- RESTORE(CKEN);
RESTORE(PSTR);
}
@@ -370,6 +379,27 @@
pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
}
+static struct map_desc pxa27x_io_desc[] __initdata = {
+ { /* Mem Ctl */
+ .virtual = SMEMC_VIRT,
+ .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
+ .length = 0x00200000,
+ .type = MT_DEVICE
+ }, { /* IMem ctl */
+ .virtual = 0xfe000000,
+ .pfn = __phys_to_pfn(0x58000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ },
+};
+
+void __init pxa27x_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(ARRAY_AND_SIZE(pxa27x_io_desc));
+ pxa27x_get_clk_frequency_khz(1);
+}
+
/*
* device registration specific to PXA27x.
*/
@@ -405,7 +435,9 @@
.cls = &pxa2xx_mfp_sysclass,
}, {
.cls = &pxa_gpio_sysclass,
- },
+ }, {
+ .cls = &pxa2xx_clock_sysclass,
+ }
};
static int __init pxa27x_init(void)
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index d1c747c..e14818f 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/sysdev.h>
+#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <mach/pxa3xx-regs.h>
@@ -30,193 +31,16 @@
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/regs-intc.h>
+#include <mach/smemc.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
#include "clock.h"
-/* Crystal clock: 13MHz */
-#define BASE_CLK 13000000
-
-/* Ring Oscillator Clock: 60MHz */
-#define RO_CLK 60000000
-
-#define ACCR_D0CS (1 << 26)
-#define ACCR_PCCE (1 << 11)
-
#define PECR_IE(n) ((1 << ((n) * 2)) << 28)
#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
-/* crystal frequency to static memory controller multiplier (SMCFS) */
-static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
-
-/* crystal frequency to HSIO bus frequency multiplier (HSS) */
-static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
-
-/*
- * Get the clock frequency as reflected by CCSR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa3xx_get_clk_frequency_khz(int info)
-{
- unsigned long acsr, xclkcfg;
- unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
-
- /* Read XCLKCFG register turbo bit */
- __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
- t = xclkcfg & 0x1;
-
- acsr = ACSR;
-
- xl = acsr & 0x1f;
- xn = (acsr >> 8) & 0x7;
- hss = (acsr >> 14) & 0x3;
-
- XL = xl * BASE_CLK;
- XN = xn * XL;
-
- ro = acsr & ACCR_D0CS;
-
- CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
- HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
- if (info) {
- pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
- RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
- (ro) ? "" : "in");
- pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
- XL / 1000000, (XL % 1000000) / 10000, xl);
- pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
- XN / 1000000, (XN % 1000000) / 10000, xn,
- (t) ? "" : "in");
- pr_info("HSIO bus clock: %d.%02dMHz\n",
- HSS / 1000000, (HSS % 1000000) / 10000);
- }
-
- return CLK / 1000;
-}
-
-void pxa3xx_clear_reset_status(unsigned int mask)
-{
- /* RESET_STATUS_* has a 1:1 mapping with ARSR */
- ARSR = mask;
-}
-
-/*
- * Return the current AC97 clock frequency.
- */
-static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk)
-{
- unsigned long rate = 312000000;
- unsigned long ac97_div;
-
- ac97_div = AC97_DIV;
-
- /* This may loose precision for some rates but won't for the
- * standard 24.576MHz.
- */
- rate /= (ac97_div >> 12) & 0x7fff;
- rate *= (ac97_div & 0xfff);
-
- return rate;
-}
-
-/*
- * Return the current HSIO bus clock frequency
- */
-static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
-{
- unsigned long acsr;
- unsigned int hss, hsio_clk;
-
- acsr = ACSR;
-
- hss = (acsr >> 14) & 0x3;
- hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
- return hsio_clk;
-}
-
-void clk_pxa3xx_cken_enable(struct clk *clk)
-{
- unsigned long mask = 1ul << (clk->cken & 0x1f);
-
- if (clk->cken < 32)
- CKENA |= mask;
- else
- CKENB |= mask;
-}
-
-void clk_pxa3xx_cken_disable(struct clk *clk)
-{
- unsigned long mask = 1ul << (clk->cken & 0x1f);
-
- if (clk->cken < 32)
- CKENA &= ~mask;
- else
- CKENB &= ~mask;
-}
-
-const struct clkops clk_pxa3xx_cken_ops = {
- .enable = clk_pxa3xx_cken_enable,
- .disable = clk_pxa3xx_cken_disable,
-};
-
-static const struct clkops clk_pxa3xx_hsio_ops = {
- .enable = clk_pxa3xx_cken_enable,
- .disable = clk_pxa3xx_cken_disable,
- .getrate = clk_pxa3xx_hsio_getrate,
-};
-
-static const struct clkops clk_pxa3xx_ac97_ops = {
- .enable = clk_pxa3xx_cken_enable,
- .disable = clk_pxa3xx_cken_disable,
- .getrate = clk_pxa3xx_ac97_getrate,
-};
-
-static void clk_pout_enable(struct clk *clk)
-{
- OSCC |= OSCC_PEN;
-}
-
-static void clk_pout_disable(struct clk *clk)
-{
- OSCC &= ~OSCC_PEN;
-}
-
-static const struct clkops clk_pout_ops = {
- .enable = clk_pout_enable,
- .disable = clk_pout_disable,
-};
-
-static void clk_dummy_enable(struct clk *clk)
-{
-}
-
-static void clk_dummy_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_dummy_ops = {
- .enable = clk_dummy_enable,
- .disable = clk_dummy_disable,
-};
-
-static struct clk clk_pxa3xx_pout = {
- .ops = &clk_pout_ops,
- .rate = 13000000,
- .delay = 70,
-};
-
-static struct clk clk_dummy = {
- .ops = &clk_dummy_ops,
-};
-
-static DEFINE_PXA3_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_PXA3_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
-static DEFINE_PXA3_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
@@ -234,6 +58,12 @@
static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
+static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
+static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops);
+static DEFINE_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
+static DEFINE_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
+static DEFINE_CLK(pxa3xx_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
+
static struct clk_lookup pxa3xx_clkregs[] = {
INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
/* Power I2C clock is always on */
@@ -258,6 +88,7 @@
INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL),
INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
+ INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
};
#ifdef CONFIG_PM
@@ -268,30 +99,6 @@
static void __iomem *sram;
static unsigned long wakeup_src;
-#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
-#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
-
-enum { SLEEP_SAVE_CKENA,
- SLEEP_SAVE_CKENB,
- SLEEP_SAVE_ACCR,
-
- SLEEP_SAVE_COUNT,
-};
-
-static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
-{
- SAVE(CKENA);
- SAVE(CKENB);
- SAVE(ACCR);
-}
-
-static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save)
-{
- RESTORE(ACCR);
- RESTORE(CKENA);
- RESTORE(CKENB);
-}
-
/*
* Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic
* memory controller has to be reinitialised, so we place some code
@@ -390,9 +197,6 @@
}
static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
- .save_count = SLEEP_SAVE_COUNT,
- .save = pxa3xx_cpu_pm_save,
- .restore = pxa3xx_cpu_pm_restore,
.valid = pxa3xx_cpu_pm_valid,
.enter = pxa3xx_cpu_pm_enter,
};
@@ -580,6 +384,22 @@
pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
+static struct map_desc pxa3xx_io_desc[] __initdata = {
+ { /* Mem Ctl */
+ .virtual = SMEMC_VIRT,
+ .pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE),
+ .length = 0x00200000,
+ .type = MT_DEVICE
+ }
+};
+
+void __init pxa3xx_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc));
+ pxa3xx_get_clk_frequency_khz(1);
+}
+
/*
* device registration specific to PXA3xx.
*/
@@ -615,7 +435,9 @@
.cls = &pxa3xx_mfp_sysclass,
}, {
.cls = &pxa_gpio_sysclass,
- },
+ }, {
+ .cls = &pxa3xx_clock_sysclass,
+ }
};
static int __init pxa3xx_init(void)
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 7d29dd3..8aeacf9 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -192,7 +192,7 @@
static int __init pxa930_init(void)
{
- if (cpu_is_pxa930() || cpu_is_pxa935() || cpu_is_pxa950()) {
+ if (cpu_is_pxa93x()) {
mfp_init_base(io_p2v(MFPR_BASE));
mfp_init_addr(pxa930_mfp_addr_map);
}
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
new file mode 100644
index 0000000..437980f
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -0,0 +1,308 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa95x.c
+ *
+ * code specific to PXA95x aka MGx
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/pxa930.h>
+#include <mach/reset.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/regs-intc.h>
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
+static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = {
+
+ MFP_ADDR(GPIO0, 0x02e0),
+ MFP_ADDR(GPIO1, 0x02dc),
+ MFP_ADDR(GPIO2, 0x02e8),
+ MFP_ADDR(GPIO3, 0x02d8),
+ MFP_ADDR(GPIO4, 0x02e4),
+ MFP_ADDR(GPIO5, 0x02ec),
+ MFP_ADDR(GPIO6, 0x02f8),
+ MFP_ADDR(GPIO7, 0x02fc),
+ MFP_ADDR(GPIO8, 0x0300),
+ MFP_ADDR(GPIO9, 0x02d4),
+ MFP_ADDR(GPIO10, 0x02f4),
+ MFP_ADDR(GPIO11, 0x02f0),
+ MFP_ADDR(GPIO12, 0x0304),
+ MFP_ADDR(GPIO13, 0x0310),
+ MFP_ADDR(GPIO14, 0x0308),
+ MFP_ADDR(GPIO15, 0x030c),
+ MFP_ADDR(GPIO16, 0x04e8),
+ MFP_ADDR(GPIO17, 0x04f4),
+ MFP_ADDR(GPIO18, 0x04f8),
+ MFP_ADDR(GPIO19, 0x04fc),
+ MFP_ADDR(GPIO20, 0x0518),
+ MFP_ADDR(GPIO21, 0x051c),
+ MFP_ADDR(GPIO22, 0x04ec),
+ MFP_ADDR(GPIO23, 0x0500),
+ MFP_ADDR(GPIO24, 0x04f0),
+ MFP_ADDR(GPIO25, 0x0504),
+ MFP_ADDR(GPIO26, 0x0510),
+ MFP_ADDR(GPIO27, 0x0514),
+ MFP_ADDR(GPIO28, 0x0520),
+ MFP_ADDR(GPIO29, 0x0600),
+ MFP_ADDR(GPIO30, 0x0618),
+ MFP_ADDR(GPIO31, 0x0610),
+ MFP_ADDR(GPIO32, 0x060c),
+ MFP_ADDR(GPIO33, 0x061c),
+ MFP_ADDR(GPIO34, 0x0620),
+ MFP_ADDR(GPIO35, 0x0628),
+ MFP_ADDR(GPIO36, 0x062c),
+ MFP_ADDR(GPIO37, 0x0630),
+ MFP_ADDR(GPIO38, 0x0634),
+ MFP_ADDR(GPIO39, 0x0638),
+ MFP_ADDR(GPIO40, 0x063c),
+ MFP_ADDR(GPIO41, 0x0614),
+ MFP_ADDR(GPIO42, 0x0624),
+ MFP_ADDR(GPIO43, 0x0608),
+ MFP_ADDR(GPIO44, 0x0604),
+ MFP_ADDR(GPIO45, 0x050c),
+ MFP_ADDR(GPIO46, 0x0508),
+ MFP_ADDR(GPIO47, 0x02bc),
+ MFP_ADDR(GPIO48, 0x02b4),
+ MFP_ADDR(GPIO49, 0x02b8),
+ MFP_ADDR(GPIO50, 0x02c8),
+ MFP_ADDR(GPIO51, 0x02c0),
+ MFP_ADDR(GPIO52, 0x02c4),
+ MFP_ADDR(GPIO53, 0x02d0),
+ MFP_ADDR(GPIO54, 0x02cc),
+ MFP_ADDR(GPIO55, 0x029c),
+ MFP_ADDR(GPIO56, 0x02a0),
+ MFP_ADDR(GPIO57, 0x0294),
+ MFP_ADDR(GPIO58, 0x0298),
+ MFP_ADDR(GPIO59, 0x02a4),
+ MFP_ADDR(GPIO60, 0x02a8),
+ MFP_ADDR(GPIO61, 0x02b0),
+ MFP_ADDR(GPIO62, 0x02ac),
+ MFP_ADDR(GPIO63, 0x0640),
+ MFP_ADDR(GPIO64, 0x065c),
+ MFP_ADDR(GPIO65, 0x0648),
+ MFP_ADDR(GPIO66, 0x0644),
+ MFP_ADDR(GPIO67, 0x0674),
+ MFP_ADDR(GPIO68, 0x0658),
+ MFP_ADDR(GPIO69, 0x0654),
+ MFP_ADDR(GPIO70, 0x0660),
+ MFP_ADDR(GPIO71, 0x0668),
+ MFP_ADDR(GPIO72, 0x0664),
+ MFP_ADDR(GPIO73, 0x0650),
+ MFP_ADDR(GPIO74, 0x066c),
+ MFP_ADDR(GPIO75, 0x064c),
+ MFP_ADDR(GPIO76, 0x0670),
+ MFP_ADDR(GPIO77, 0x0678),
+ MFP_ADDR(GPIO78, 0x067c),
+ MFP_ADDR(GPIO79, 0x0694),
+ MFP_ADDR(GPIO80, 0x069c),
+ MFP_ADDR(GPIO81, 0x06a0),
+ MFP_ADDR(GPIO82, 0x06a4),
+ MFP_ADDR(GPIO83, 0x0698),
+ MFP_ADDR(GPIO84, 0x06bc),
+ MFP_ADDR(GPIO85, 0x06b4),
+ MFP_ADDR(GPIO86, 0x06b0),
+ MFP_ADDR(GPIO87, 0x06c0),
+ MFP_ADDR(GPIO88, 0x06c4),
+ MFP_ADDR(GPIO89, 0x06ac),
+ MFP_ADDR(GPIO90, 0x0680),
+ MFP_ADDR(GPIO91, 0x0684),
+ MFP_ADDR(GPIO92, 0x0688),
+ MFP_ADDR(GPIO93, 0x0690),
+ MFP_ADDR(GPIO94, 0x068c),
+ MFP_ADDR(GPIO95, 0x06a8),
+ MFP_ADDR(GPIO96, 0x06b8),
+ MFP_ADDR(GPIO97, 0x0410),
+ MFP_ADDR(GPIO98, 0x0418),
+ MFP_ADDR(GPIO99, 0x041c),
+ MFP_ADDR(GPIO100, 0x0414),
+ MFP_ADDR(GPIO101, 0x0408),
+ MFP_ADDR(GPIO102, 0x0324),
+ MFP_ADDR(GPIO103, 0x040c),
+ MFP_ADDR(GPIO104, 0x0400),
+ MFP_ADDR(GPIO105, 0x0328),
+ MFP_ADDR(GPIO106, 0x0404),
+
+ MFP_ADDR(GPIO159, 0x0524),
+ MFP_ADDR(GPIO163, 0x0534),
+ MFP_ADDR(GPIO167, 0x0544),
+ MFP_ADDR(GPIO168, 0x0548),
+ MFP_ADDR(GPIO169, 0x054c),
+ MFP_ADDR(GPIO170, 0x0550),
+ MFP_ADDR(GPIO171, 0x0554),
+ MFP_ADDR(GPIO172, 0x0558),
+ MFP_ADDR(GPIO173, 0x055c),
+
+ MFP_ADDR(nXCVREN, 0x0204),
+ MFP_ADDR(DF_CLE_nOE, 0x020c),
+ MFP_ADDR(DF_nADV1_ALE, 0x0218),
+ MFP_ADDR(DF_SCLK_E, 0x0214),
+ MFP_ADDR(DF_SCLK_S, 0x0210),
+ MFP_ADDR(nBE0, 0x021c),
+ MFP_ADDR(nBE1, 0x0220),
+ MFP_ADDR(DF_nADV2_ALE, 0x0224),
+ MFP_ADDR(DF_INT_RnB, 0x0228),
+ MFP_ADDR(DF_nCS0, 0x022c),
+ MFP_ADDR(DF_nCS1, 0x0230),
+ MFP_ADDR(nLUA, 0x0254),
+ MFP_ADDR(nLLA, 0x0258),
+ MFP_ADDR(DF_nWE, 0x0234),
+ MFP_ADDR(DF_nRE_nOE, 0x0238),
+ MFP_ADDR(DF_ADDR0, 0x024c),
+ MFP_ADDR(DF_ADDR1, 0x0250),
+ MFP_ADDR(DF_ADDR2, 0x025c),
+ MFP_ADDR(DF_ADDR3, 0x0260),
+ MFP_ADDR(DF_IO0, 0x023c),
+ MFP_ADDR(DF_IO1, 0x0240),
+ MFP_ADDR(DF_IO2, 0x0244),
+ MFP_ADDR(DF_IO3, 0x0248),
+ MFP_ADDR(DF_IO4, 0x0264),
+ MFP_ADDR(DF_IO5, 0x0268),
+ MFP_ADDR(DF_IO6, 0x026c),
+ MFP_ADDR(DF_IO7, 0x0270),
+ MFP_ADDR(DF_IO8, 0x0274),
+ MFP_ADDR(DF_IO9, 0x0278),
+ MFP_ADDR(DF_IO10, 0x027c),
+ MFP_ADDR(DF_IO11, 0x0280),
+ MFP_ADDR(DF_IO12, 0x0284),
+ MFP_ADDR(DF_IO13, 0x0288),
+ MFP_ADDR(DF_IO14, 0x028c),
+ MFP_ADDR(DF_IO15, 0x0290),
+
+ MFP_ADDR(GSIM_UIO, 0x0314),
+ MFP_ADDR(GSIM_UCLK, 0x0318),
+ MFP_ADDR(GSIM_UDET, 0x031c),
+ MFP_ADDR(GSIM_nURST, 0x0320),
+
+ MFP_ADDR(PMIC_INT, 0x06c8),
+
+ MFP_ADDR(RDY, 0x0200),
+
+ MFP_ADDR_END,
+};
+
+static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops);
+static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
+static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
+
+static struct clk_lookup pxa95x_clkregs[] = {
+ INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
+ /* Power I2C clock is always on */
+ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
+ INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
+ INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL),
+ INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"),
+ INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL),
+ INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL),
+ INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL),
+ INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL),
+ INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
+ INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
+ INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
+};
+
+void __init pxa95x_init_irq(void)
+{
+ pxa_init_irq(96, NULL);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
+}
+
+/*
+ * device registration specific to PXA93x.
+ */
+
+void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+ pxa_register_device(&pxa3xx_device_i2c_power, info);
+}
+
+static struct platform_device *devices[] __initdata = {
+ &sa1100_device_rtc,
+ &pxa_device_rtc,
+ &pxa27x_device_ssp1,
+ &pxa27x_device_ssp2,
+ &pxa27x_device_ssp3,
+ &pxa3xx_device_ssp4,
+ &pxa27x_device_pwm0,
+ &pxa27x_device_pwm1,
+};
+
+static struct sys_device pxa95x_sysdev[] = {
+ {
+ .cls = &pxa_irq_sysclass,
+ }, {
+ .cls = &pxa_gpio_sysclass,
+ }, {
+ .cls = &pxa3xx_clock_sysclass,
+ }
+};
+
+static int __init pxa95x_init(void)
+{
+ int ret = 0, i;
+
+ if (cpu_is_pxa95x()) {
+ mfp_init_base(io_p2v(MFPR_BASE));
+ mfp_init_addr(pxa95x_mfp_addr_map);
+
+ reset_status = ARSR;
+
+ /*
+ * clear RDH bit every time after reset
+ *
+ * Note: the last 3 bits DxS are write-1-to-clear so carefully
+ * preserve them here in case they will be referenced later
+ */
+ ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
+
+ clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs));
+
+ if ((ret = pxa_init_dma(IRQ_DMA, 32)))
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(pxa95x_sysdev); i++) {
+ ret = sysdev_register(&pxa95x_sysdev[i]);
+ if (ret)
+ pr_err("failed to register sysdev[%d]\n", i);
+ }
+
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ }
+
+ return ret;
+}
+
+postcore_initcall(pxa95x_init);
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 4121d03..8361151 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -588,6 +588,9 @@
.num_modes = 1,
.video_mem_size = 0x400000,
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+#ifdef CONFIG_PXA3XX_GCU
+ .acceleration_enabled = 1,
+#endif
};
static void __init raumfeld_lcd_init(void)
@@ -616,6 +619,8 @@
pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
else
gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
+
+ platform_device_register(&pxa3xx_device_gcu);
}
/**
@@ -1085,7 +1090,7 @@
MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
.boot_params = RAUMFELD_SDRAM_BASE + 0x100,
.init_machine = raumfeld_controller_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
@@ -1095,7 +1100,7 @@
MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
.boot_params = RAUMFELD_SDRAM_BASE + 0x100,
.init_machine = raumfeld_connector_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
@@ -1105,7 +1110,7 @@
MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
.boot_params = RAUMFELD_SDRAM_BASE + 0x100,
.init_machine = raumfeld_speaker_init,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index ffa50e6..c1ca8cb 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -597,7 +597,7 @@
MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = saar_init,
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
new file mode 100644
index 0000000..e497922
--- /dev/null
+++ b/arch/arm/mach-pxa/saarb.c
@@ -0,0 +1,114 @@
+/*
+ * linux/arch/arm/mach-pxa/saarb.c
+ *
+ * Support for the Marvell Handheld Platform (aka SAARB)
+ *
+ * Copyright (C) 2007-2010 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/mfd/88pm860x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa930.h>
+#include <mach/gpio.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+
+#define SAARB_NR_IRQS (IRQ_BOARD_START + 40)
+
+static struct pm860x_touch_pdata saarb_touch = {
+ .gpadc_prebias = 1,
+ .slot_cycle = 1,
+ .tsi_prebias = 6,
+ .pen_prebias = 16,
+ .pen_prechg = 2,
+ .res_x = 300,
+};
+
+static struct pm860x_backlight_pdata saarb_backlight[] = {
+ {
+ .id = PM8606_ID_BACKLIGHT,
+ .iset = PM8606_WLED_CURRENT(24),
+ .flags = PM8606_BACKLIGHT1,
+ },
+ {},
+};
+
+static struct pm860x_led_pdata saarb_led[] = {
+ {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED1_RED,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED1_GREEN,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED1_BLUE,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED2_RED,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED2_GREEN,
+ }, {
+ .id = PM8606_ID_LED,
+ .iset = PM8606_LED_CURRENT(12),
+ .flags = PM8606_LED2_BLUE,
+ },
+};
+
+static struct pm860x_platform_data saarb_pm8607_info = {
+ .touch = &saarb_touch,
+ .backlight = &saarb_backlight[0],
+ .led = &saarb_led[0],
+ .companion_addr = 0x10,
+ .irq_mode = 0,
+ .irq_base = IRQ_BOARD_START,
+
+ .i2c_port = GI2C_PORT,
+};
+
+static struct i2c_board_info saarb_i2c_info[] = {
+ {
+ .type = "88PM860x",
+ .addr = 0x34,
+ .platform_data = &saarb_pm8607_info,
+ .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+ },
+};
+
+static void __init saarb_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(saarb_i2c_info));
+}
+
+MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .nr_irqs = SAARB_NR_IRQS,
+ .init_irq = pxa95x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = saarb_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 52c30b0..2f5b08a 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -14,7 +14,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/hardware.h>
-
+#include <mach/smemc.h>
#include <mach/pxa2xx-regs.h>
#define MDREFR_KDIV 0x200a4000 // all banks
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index d6f6904..232b731 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -9,50 +9,37 @@
#include <linux/sysdev.h>
#include <mach/hardware.h>
-
-#define SMEMC_PHYS_BASE (0x4A000000)
-#define SMEMC_PHYS_SIZE (0x90)
-
-#define MSC0 (0x08) /* Static Memory Controller Register 0 */
-#define MSC1 (0x0C) /* Static Memory Controller Register 1 */
-#define SXCNFG (0x1C) /* Synchronous Static Memory Control Register */
-#define MEMCLKCFG (0x68) /* Clock Configuration */
-#define CSADRCFG0 (0x80) /* Address Configuration Register for CS0 */
-#define CSADRCFG1 (0x84) /* Address Configuration Register for CS1 */
-#define CSADRCFG2 (0x88) /* Address Configuration Register for CS2 */
-#define CSADRCFG3 (0x8C) /* Address Configuration Register for CS3 */
+#include <mach/smemc.h>
#ifdef CONFIG_PM
-static void __iomem *smemc_mmio_base;
-
static unsigned long msc[2];
static unsigned long sxcnfg, memclkcfg;
static unsigned long csadrcfg[4];
static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state)
{
- msc[0] = __raw_readl(smemc_mmio_base + MSC0);
- msc[1] = __raw_readl(smemc_mmio_base + MSC1);
- sxcnfg = __raw_readl(smemc_mmio_base + SXCNFG);
- memclkcfg = __raw_readl(smemc_mmio_base + MEMCLKCFG);
- csadrcfg[0] = __raw_readl(smemc_mmio_base + CSADRCFG0);
- csadrcfg[1] = __raw_readl(smemc_mmio_base + CSADRCFG1);
- csadrcfg[2] = __raw_readl(smemc_mmio_base + CSADRCFG2);
- csadrcfg[3] = __raw_readl(smemc_mmio_base + CSADRCFG3);
+ msc[0] = __raw_readl(MSC0);
+ msc[1] = __raw_readl(MSC1);
+ sxcnfg = __raw_readl(SXCNFG);
+ memclkcfg = __raw_readl(MEMCLKCFG);
+ csadrcfg[0] = __raw_readl(CSADRCFG0);
+ csadrcfg[1] = __raw_readl(CSADRCFG1);
+ csadrcfg[2] = __raw_readl(CSADRCFG2);
+ csadrcfg[3] = __raw_readl(CSADRCFG3);
return 0;
}
static int pxa3xx_smemc_resume(struct sys_device *dev)
{
- __raw_writel(msc[0], smemc_mmio_base + MSC0);
- __raw_writel(msc[1], smemc_mmio_base + MSC1);
- __raw_writel(sxcnfg, smemc_mmio_base + SXCNFG);
- __raw_writel(memclkcfg, smemc_mmio_base + MEMCLKCFG);
- __raw_writel(csadrcfg[0], smemc_mmio_base + CSADRCFG0);
- __raw_writel(csadrcfg[1], smemc_mmio_base + CSADRCFG1);
- __raw_writel(csadrcfg[2], smemc_mmio_base + CSADRCFG2);
- __raw_writel(csadrcfg[3], smemc_mmio_base + CSADRCFG3);
+ __raw_writel(msc[0], MSC0);
+ __raw_writel(msc[1], MSC1);
+ __raw_writel(sxcnfg, SXCNFG);
+ __raw_writel(memclkcfg, MEMCLKCFG);
+ __raw_writel(csadrcfg[0], CSADRCFG0);
+ __raw_writel(csadrcfg[1], CSADRCFG1);
+ __raw_writel(csadrcfg[2], CSADRCFG2);
+ __raw_writel(csadrcfg[3], CSADRCFG3);
return 0;
}
@@ -73,10 +60,6 @@
int ret = 0;
if (cpu_is_pxa3xx()) {
- smemc_mmio_base = ioremap(SMEMC_PHYS_BASE, SMEMC_PHYS_SIZE);
- if (smemc_mmio_base == NULL)
- return -ENODEV;
-
ret = sysdev_class_register(&smemc_sysclass);
if (ret)
return ret;
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index f736119..0499a69 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -27,6 +27,7 @@
#include <linux/mtd/sharpsl.h>
#include <linux/input/matrix_keypad.h>
#include <linux/regulator/machine.h>
+#include <linux/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -44,6 +45,7 @@
#include <mach/pxa2xx_spi.h>
#include <mach/spitz.h>
#include <mach/sharpsl_pm.h>
+#include <mach/smemc.h>
#include <plat/i2c.h>
@@ -929,9 +931,10 @@
static void spitz_restart(char mode, const char *cmd)
{
+ uint32_t msc0 = __raw_readl(MSC0);
/* Bootloader magic for a reboot */
- if ((MSC0 & 0xffff0000) == 0x7ff00000)
- MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+ if ((msc0 & 0xffff0000) == 0x7ff00000)
+ __raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
spitz_poweroff();
}
@@ -980,7 +983,7 @@
#ifdef CONFIG_MACH_SPITZ
MACHINE_START(SPITZ, "SHARP Spitz")
.fixup = spitz_fixup,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
@@ -990,7 +993,7 @@
#ifdef CONFIG_MACH_BORZOI
MACHINE_START(BORZOI, "SHARP Borzoi")
.fixup = spitz_fixup,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
@@ -1000,7 +1003,7 @@
#ifdef CONFIG_MACH_AKITA
MACHINE_START(AKITA, "SHARP Akita")
.fixup = spitz_fixup,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 738adc1..3498a14 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -48,6 +48,7 @@
#include <mach/udc.h>
#include <mach/pxa2xx_spi.h>
#include <mach/pxa27x-udc.h>
+#include <mach/smemc.h>
#include <linux/spi/spi.h>
#include <linux/mfd/da903x.h>
@@ -976,7 +977,7 @@
{
/* This is probably a board specific hack as this must be set
prior to connecting the MFP stuff up. */
- MECR &= ~MECR_NOS;
+ __raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);
pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
@@ -998,7 +999,7 @@
#ifdef CONFIG_MACH_INTELMOTE2
MACHINE_START(INTELMOTE2, "IMOTE 2")
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = imote2_init,
@@ -1008,7 +1009,7 @@
#ifdef CONFIG_MACH_STARGATE2
MACHINE_START(STARGATE2, "Stargate 2")
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.nr_irqs = STARGATE_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 2ea7545..9cecf83 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -490,7 +490,7 @@
MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = tavorevb_init,
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index dc30116..70191a9 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -127,7 +127,7 @@
MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.nr_irqs = TAVOREVB3_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 0ee1df4..57d61ee 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -46,6 +46,7 @@
#include <mach/tosa_bt.h>
#include <mach/pxa2xx_spi.h>
#include <mach/audio.h>
+#include <mach/smemc.h>
#include <asm/mach/arch.h>
#include <mach/tosa.h>
@@ -893,9 +894,11 @@
static void tosa_restart(char mode, const char *cmd)
{
+ uint32_t msc0 = __raw_readl(MSC0);
+
/* Bootloader magic for a reboot */
- if((MSC0 & 0xffff0000) == 0x7ff00000)
- MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+ if((msc0 & 0xffff0000) == 0x7ff00000)
+ __raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
tosa_poweroff();
}
@@ -953,7 +956,7 @@
MACHINE_START(TOSA, "SHARP Tosa")
.fixup = fixup_tosa,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.nr_irqs = TOSA_NR_IRQS,
.init_irq = pxa25x_init_irq,
.init_machine = tosa_init,
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 565d062..43fc9ca 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -47,6 +47,7 @@
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
+#include <mach/smemc.h>
#include <plat/i2c.h>
#include "generic.h"
@@ -539,10 +540,10 @@
static void __init trizeps4_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
- if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
+ if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
/* if flash is 16 bit wide its a Trizeps4 WL */
__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
trizeps4_flash_data[0].width = 2;
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 438fc9a..de69b20 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -983,7 +983,7 @@
static void __init viper_map_io(void)
{
- pxa_map_io();
+ pxa25x_map_io();
iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index f45ac09..b9b5797 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -719,7 +719,7 @@
MACHINE_START(VPAC270, "Voipac PXA270")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = vpac270_init
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 3260ce7..51c0281 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -31,6 +31,7 @@
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
+#include <mach/smemc.h>
#include "generic.h"
@@ -172,9 +173,9 @@
/* See Intel XScale Developer's Guide for details */
/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
- MSC1 = (MSC1 & 0xffff) | 0xD5540000;
+ __raw_writel((__raw_readl(MSC1) & 0xffff) | 0xD5540000, MSC1);
/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
- MSC2 = (MSC2 & 0xffff) | 0x72A00000;
+ __raw_writel((__raw_readl(MSC2) & 0xffff) | 0x72A00000, MSC2);
platform_add_devices(ARRAY_AND_SIZE(devices));
pxa_set_i2c_info(&xcep_i2c_platform_data);
@@ -183,7 +184,7 @@
MACHINE_START(XCEP, "Iskratel XCEP")
.boot_params = 0xa0000100,
.init_machine = xcep_init,
- .map_io = pxa_map_io,
+ .map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
MACHINE_END
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index fefde98..527c2a1 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -704,7 +704,7 @@
MACHINE_START(ZIPIT2, "Zipit Z2")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = z2_init,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index dea46a2..c87f2b3 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -47,6 +47,7 @@
#include <mach/audio.h>
#include <mach/arcom-pcmcia.h>
#include <mach/zeus.h>
+#include <mach/smemc.h>
#include "generic.h"
@@ -823,13 +824,16 @@
static void __init zeus_init(void)
{
u16 dm9000_msc = DM9K_MSC_VALUE;
+ u32 msc0, msc1;
system_rev = __raw_readw(ZEUS_CPLD_VERSION);
pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
/* Fix timings for dm9000s (CS1/CS2)*/
- MSC0 = (MSC0 & 0xffff) | (dm9000_msc << 16);
- MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
+ msc0 = __raw_readl(MSC0) & 0x0000ffff | (dm9000_msc << 16);
+ msc1 = __raw_readl(MSC1) & 0xffff0000 | dm9000_msc;
+ __raw_writel(msc0, MSC0);
+ __raw_writel(msc1, MSC1);
pm_power_off = zeus_power_off;
zeus_setup_apm();
@@ -883,7 +887,7 @@
static void __init zeus_map_io(void)
{
- pxa_map_io();
+ pxa27x_map_io();
iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 702f7a6..a4c784a 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -423,7 +423,7 @@
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
.boot_params = 0xa0000100,
- .map_io = pxa_map_io,
+ .map_io = pxa3xx_map_io,
.nr_irqs = ZYLONITE_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index cef6a65..fa2e5bf 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -16,7 +16,7 @@
config CPU_S3C2412_ONLY
bool
depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
- !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+ !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
!CPU_S3C2443 && CPU_S3C2412
default y if CPU_S3C2412
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 87b9c9f..27b3e7c 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -35,9 +35,12 @@
config MACH_SMDK2416
bool "SMDK2416"
select CPU_S3C2416
+ select MACH_SMDK
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
select S3C2416_PM if PM
help
Say Y here if you are using an SMDK2416
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index ff024a6..a0cb258 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -18,6 +18,7 @@
config CPU_S3C2442
bool
select CPU_ARM920T
+ select S3C_GPIO_PULL_DOWN
select S3C2410_CLOCK
select S3C2410_GPIO
select S3C2410_PM if PM
@@ -178,6 +179,9 @@
bool "MINI2440 development board"
select CPU_S3C2440
select EEPROM_AT24
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_TRIGGER
select LEDS_TRIGGER_BACKLIGHT
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index d50f3ae..f7663f7 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -46,9 +46,6 @@
{
printk("S3C2440: Initialising architecture\n");
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
-
/* change irq for watchdog */
s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
@@ -58,3 +55,11 @@
return sysdev_register(&s3c2440_sysdev);
}
+
+void __init s3c2440_map_io(void)
+{
+ s3c244x_map_io();
+
+ s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+}
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 188ad1e..ecf8135 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -32,6 +32,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/mutex.h>
+#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -43,6 +44,11 @@
#include <plat/clock.h>
#include <plat/cpu.h>
+#include <plat/s3c244x.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
/* S3C2442 extended clock support */
@@ -163,3 +169,11 @@
return sysdev_register(&s3c2442_sysdev);
}
+
+void __init s3c2442_map_io(void)
+{
+ s3c244x_map_io();
+
+ s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
+ s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+}
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 4fef723..31babec 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -5,6 +5,7 @@
config CPU_S3C2443
bool
depends on ARCH_S3C2410
+ select CPU_ARM920T
select S3C2443_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 4414a01..a099efe 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -382,6 +382,12 @@
for which the CPU ID is equal to the ARM926 ID.
Relevant for Feroceon-1850 and early Feroceon-2850.
+# Marvell PJ4
+config CPU_PJ4
+ bool
+ select CPU_V7
+ select ARM_THUMBEE
+
# ARMv6
config CPU_V6
bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
@@ -789,7 +795,7 @@
config CACHE_TAUROS2
bool "Enable the Tauros2 L2 cache controller"
- depends on (ARCH_DOVE || ARCH_MMP)
+ depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4)
default y
select OUTER_CACHE
help
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 99fa688..c96fa1b 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -203,6 +203,10 @@
* - end - virtual end address of region
*/
v6_dma_inv_range:
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrb r2, [r0] @ read for ownership
+ strb r2, [r0] @ write for ownership
+#endif
tst r0, #D_CACHE_LINE_SIZE - 1
bic r0, r0, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
@@ -211,6 +215,10 @@
mcrne p15, 0, r0, c7, c11, 1 @ clean unified line
#endif
tst r1, #D_CACHE_LINE_SIZE - 1
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrneb r2, [r1, #-1] @ read for ownership
+ strneb r2, [r1, #-1] @ write for ownership
+#endif
bic r1, r1, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line
@@ -218,10 +226,6 @@
mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line
#endif
1:
-#ifdef CONFIG_DMA_CACHE_RWFO
- ldr r2, [r0] @ read for ownership
- str r2, [r0] @ write for ownership
-#endif
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c6, 1 @ invalidate D line
#else
@@ -229,6 +233,10 @@
#endif
add r0, r0, #D_CACHE_LINE_SIZE
cmp r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrlo r2, [r0] @ read for ownership
+ strlo r2, [r0] @ write for ownership
+#endif
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
@@ -263,12 +271,12 @@
* - end - virtual end address of region
*/
ENTRY(v6_dma_flush_range)
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrb r2, [r0] @ read for ownership
+ strb r2, [r0] @ write for ownership
+#endif
bic r0, r0, #D_CACHE_LINE_SIZE - 1
1:
-#ifdef CONFIG_DMA_CACHE_RWFO
- ldr r2, [r0] @ read for ownership
- str r2, [r0] @ write for ownership
-#endif
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line
#else
@@ -276,6 +284,10 @@
#endif
add r0, r0, #D_CACHE_LINE_SIZE
cmp r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrlob r2, [r0] @ read for ownership
+ strlob r2, [r0] @ write for ownership
+#endif
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index a3ebf7a..6136e68 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -173,15 +173,22 @@
UNWIND(.fnstart )
dcache_line_size r2, r3
sub r3, r2, #1
- bic r0, r0, r3
+ bic r12, r0, r3
1:
- USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification
- dsb
- USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line
- add r0, r0, r2
-2:
- cmp r0, r1
+ USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification
+ add r12, r12, r2
+ cmp r12, r1
blo 1b
+ dsb
+ icache_line_size r2, r3
+ sub r3, r2, #1
+ bic r12, r0, r3
+2:
+ USER( mcr p15, 0, r12, c7, c5, 1 ) @ invalidate I line
+ add r12, r12, r2
+ cmp r12, r1
+ blo 2b
+3:
mov r0, #0
ALT_SMP(mcr p15, 0, r0, c7, c1, 6) @ invalidate BTB Inner Shareable
ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB
@@ -194,10 +201,10 @@
* isn't mapped, just try the next page.
*/
9001:
- mov r0, r0, lsr #12
- mov r0, r0, lsl #12
- add r0, r0, #4096
- b 2b
+ mov r12, r12, lsr #12
+ mov r12, r12, lsl #12
+ add r12, r12, #4096
+ b 3b
UNWIND(.fnend )
ENDPROC(v7_coherent_kern_range)
ENDPROC(v7_coherent_user_range)
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 7d63bea..b795afd 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -61,17 +61,27 @@
.endm
/*
- * cache_line_size - get the cache line size from the CSIDR register
- * (available on ARMv7+). It assumes that the CSSR register was configured
- * to access the L1 data cache CSIDR.
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
*/
.macro dcache_line_size, reg, tmp
- mrc p15, 1, \tmp, c0, c0, 0 @ read CSIDR
- and \tmp, \tmp, #7 @ cache line size encoding
- mov \reg, #16 @ size offset
+ mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+ lsr \tmp, \tmp, #16
+ and \tmp, \tmp, #0xf @ cache line size encoding
+ mov \reg, #4 @ bytes per word
mov \reg, \reg, lsl \tmp @ actual cache line size
.endm
+/*
+ * icache_line_size - get the minimum I-cache line size from the CTR register
+ * on ARMv7.
+ */
+ .macro icache_line_size, reg, tmp
+ mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+ and \tmp, \tmp, #0xf @ cache line size encoding
+ mov \reg, #4 @ bytes per word
+ mov \reg, \reg, lsl \tmp @ actual cache line size
+ .endm
/*
* Sanity check the PTE configuration for the code below - which makes
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 155fe43..8722a13 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/err.h>
#include <plat/common.h>
#include <plat/board.h>
@@ -164,7 +165,7 @@
return -ENODEV;
sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
- if (sync_32k_ick)
+ if (!IS_ERR(sync_32k_ick))
clk_enable(sync_32k_ick);
clocksource_32k.mult = clocksource_hz2mult(32768,
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index e2c8eeb..74dac41 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -166,7 +166,7 @@
cpu_is_omap1710())
omap_sram_size = 0x4000; /* 16K */
else if (cpu_is_omap1611())
- omap_sram_size = 0x3e800; /* 250K */
+ omap_sram_size = SZ_256K;
else {
printk(KERN_ERR "Could not detect SRAM size\n");
omap_sram_size = 0x4000;
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 4aacdd1..3aca5ba 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PXA3xx) += mfp.o
+obj-$(CONFIG_PXA95x) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 9e604c8..75f6564 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -423,7 +423,7 @@
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
(MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP)
/*
* each MFP pin will have a MFPR register, since the offset of the
* register varies between processors, the processor specific code
@@ -470,6 +470,6 @@
void mfp_config(unsigned long *mfp_cfgs, int num);
void mfp_config_run(void);
void mfp_config_lpm(void);
-#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
+#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */
#endif /* __ASM_PLAT_MFP_H */
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 76d0858..4a10c0f 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -88,7 +88,7 @@
{
.idcode = 0x32440000,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
@@ -97,7 +97,7 @@
{
.idcode = 0x32440001,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
@@ -106,7 +106,7 @@
{
.idcode = 0x32440aaa,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
@@ -115,7 +115,7 @@
{
.idcode = 0x32440aab,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 24c6f5a..243b641 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -82,8 +82,6 @@
struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
.set_config = s3c_gpio_setcfg_s3c24xx,
.get_config = s3c_gpio_getcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_1up,
- .get_pull = s3c_gpio_getpull_1up,
};
struct s3c_gpio_chip s3c24xx_gpios[] = {
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
index 307248d..89e8d0a 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
@@ -21,17 +21,22 @@
#else
#define s3c244x_init_clocks NULL
#define s3c244x_init_uarts NULL
-#define s3c244x_map_io NULL
#endif
#ifdef CONFIG_CPU_S3C2440
extern int s3c2440_init(void);
+
+extern void s3c2440_map_io(void);
#else
#define s3c2440_init NULL
+#define s3c2440_map_io NULL
#endif
#ifdef CONFIG_CPU_S3C2442
extern int s3c2442_init(void);
+
+extern void s3c2442_map_io(void);
#else
#define s3c2442_init NULL
+#define s3c2442_map_io NULL
#endif
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index b732b77..0aa32f2 100644
--- a/arch/arm/plat-samsung/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -280,18 +280,17 @@
}
#endif
-#ifdef CONFIG_S3C_GPIO_PULL_UP
-int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
+#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
+static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull,
+ s3c_gpio_pull_t updown)
{
void __iomem *reg = chip->base + 0x08;
u32 pup = __raw_readl(reg);
- pup = __raw_readl(reg);
-
- if (pup == S3C_GPIO_PULL_UP)
+ if (pull == updown)
pup &= ~(1 << off);
- else if (pup == S3C_GPIO_PULL_NONE)
+ else if (pull == S3C_GPIO_PULL_NONE)
pup |= (1 << off);
else
return -EINVAL;
@@ -300,17 +299,45 @@
return 0;
}
-s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off)
+static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t updown)
{
void __iomem *reg = chip->base + 0x08;
u32 pup = __raw_readl(reg);
pup &= (1 << off);
- return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP;
+ return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
+
+#ifdef CONFIG_S3C_GPIO_PULL_UP
+s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
}
#endif /* CONFIG_S3C_GPIO_PULL_UP */
+#ifdef CONFIG_S3C_GPIO_PULL_DOWN
+s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
+
#ifdef CONFIG_S5P_GPIO_DRVSTR
s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
{
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 8fd65d8..0d2c570 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -210,6 +210,17 @@
unsigned int off);
/**
+ * s3c_gpio_getpull_1down() - Get configuration for choice of down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-down resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_1down.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off);
+
+/**
* s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
* @chip: The gpio chip that is being configured.
* @off: The offset for the GPIO being configured.
diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c
index 9768cf7..9696ddc 100644
--- a/arch/arm/plat-versatile/sched-clock.c
+++ b/arch/arm/plat-versatile/sched-clock.c
@@ -20,6 +20,7 @@
*/
#include <linux/cnt32_to_63.h>
#include <linux/io.h>
+#include <linux/sched.h>
#include <asm/div64.h>
#include <mach/hardware.h>
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 55590a4..2fea897 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Thu Sep 9 22:43:01 2010
+# Last update: Sun Dec 12 23:24:27 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -2321,7 +2321,7 @@
u380 MACH_U380 U380 2333
oamp3_hualu MACH_HUALU_BOARD HUALU_BOARD 2334
npcmx50 MACH_NPCMX50 NPCMX50 2335
-mx51_lange51 MACH_MX51_LANGE51 MX51_LANGE51 2336
+mx51_efikamx MACH_MX51_EFIKAMX MX51_EFIKAMX 2336
mx51_lange52 MACH_MX51_LANGE52 MX51_LANGE52 2337
riom MACH_RIOM RIOM 2338
comcas MACH_COMCAS COMCAS 2339
@@ -2355,7 +2355,7 @@
csb732 MACH_CSB732 CSB732 2367
u8500 MACH_U8500 U8500 2368
huqiu MACH_HUQIU HUQIU 2369
-mx51_kunlun MACH_MX51_KUNLUN MX51_KUNLUN 2370
+mx51_efikasb MACH_MX51_EFIKASB MX51_EFIKASB 2370
pmt1g MACH_PMT1G PMT1G 2371
htcelf MACH_HTCELF HTCELF 2372
armadillo420 MACH_ARMADILLO420 ARMADILLO420 2373
@@ -2971,7 +2971,7 @@
wasabi MACH_WASABI WASABI 2986
vivow MACH_VIVOW VIVOW 2987
mx50_rdp MACH_MX50_RDP MX50_RDP 2988
-universal MACH_UNIVERSAL UNIVERSAL 2989
+universal_c210 MACH_UNIVERSAL_C210 UNIVERSAL_C210 2989
real6410 MACH_REAL6410 REAL6410 2990
spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991
ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992
@@ -3044,3 +3044,178 @@
msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060
spear900 MACH_SPEAR900 SPEAR900 3061
pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062
+rdstor MACH_RDSTOR RDSTOR 3063
+usdloader MACH_USDLOADER USDLOADER 3064
+tsoploader MACH_TSOPLOADER TSOPLOADER 3065
+kronos MACH_KRONOS KRONOS 3066
+ffcore MACH_FFCORE FFCORE 3067
+mone MACH_MONE MONE 3068
+unit2s MACH_UNIT2S UNIT2S 3069
+acer_a5 MACH_ACER_A5 ACER_A5 3070
+etherpro_isp MACH_ETHERPRO_ISP ETHERPRO_ISP 3071
+stretchs7000 MACH_STRETCHS7000 STRETCHS7000 3072
+p87_smartsim MACH_P87_SMARTSIM P87_SMARTSIM 3073
+tulip MACH_TULIP TULIP 3074
+sunflower MACH_SUNFLOWER SUNFLOWER 3075
+rib MACH_RIB RIB 3076
+clod MACH_CLOD CLOD 3077
+rump MACH_RUMP RUMP 3078
+tenderloin MACH_TENDERLOIN TENDERLOIN 3079
+shortloin MACH_SHORTLOIN SHORTLOIN 3080
+crespo MACH_CRESPO CRESPO 3081
+antares MACH_ANTARES ANTARES 3082
+wb40n MACH_WB40N WB40N 3083
+herring MACH_HERRING HERRING 3084
+naxy400 MACH_NAXY400 NAXY400 3085
+naxy1200 MACH_NAXY1200 NAXY1200 3086
+vpr200 MACH_VPR200 VPR200 3087
+bug20 MACH_BUG20 BUG20 3088
+goflexnet MACH_GOFLEXNET GOFLEXNET 3089
+torbreck MACH_TORBRECK TORBRECK 3090
+saarb_mg1 MACH_SAARB_MG1 SAARB_MG1 3091
+callisto MACH_CALLISTO CALLISTO 3092
+multhsu MACH_MULTHSU MULTHSU 3093
+saluda MACH_SALUDA SALUDA 3094
+pemp_omap3_apollo MACH_PEMP_OMAP3_APOLLO PEMP_OMAP3_APOLLO 3095
+vc0718 MACH_VC0718 VC0718 3096
+mvblx MACH_MVBLX MVBLX 3097
+inhand_apeiron MACH_INHAND_APEIRON INHAND_APEIRON 3098
+inhand_fury MACH_INHAND_FURY INHAND_FURY 3099
+inhand_siren MACH_INHAND_SIREN INHAND_SIREN 3100
+hdnvp MACH_HDNVP HDNVP 3101
+softwinner MACH_SOFTWINNER SOFTWINNER 3102
+prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103
+nas6210 MACH_NAS6210 NAS6210 3104
+unisdev MACH_UNISDEV UNISDEV 3105
+sbca11 MACH_SBCA11 SBCA11 3106
+saga MACH_SAGA SAGA 3107
+ns_k330 MACH_NS_K330 NS_K330 3108
+tanna MACH_TANNA TANNA 3109
+imate8502 MACH_IMATE8502 IMATE8502 3110
+aspen MACH_ASPEN ASPEN 3111
+daintree_cwac MACH_DAINTREE_CWAC DAINTREE_CWAC 3112
+zmx25 MACH_ZMX25 ZMX25 3113
+maple1 MACH_MAPLE1 MAPLE1 3114
+qsd8x72_surf MACH_QSD8X72_SURF QSD8X72_SURF 3115
+qsd8x72_ffa MACH_QSD8X72_FFA QSD8X72_FFA 3116
+abilene MACH_ABILENE ABILENE 3117
+eigen_ttr MACH_EIGEN_TTR EIGEN_TTR 3118
+iomega_ix2_200 MACH_IOMEGA_IX2_200 IOMEGA_IX2_200 3119
+coretec_vcx7400 MACH_CORETEC_VCX7400 CORETEC_VCX7400 3120
+santiago MACH_SANTIAGO SANTIAGO 3121
+mx257sol MACH_MX257SOL MX257SOL 3122
+strasbourg MACH_STRASBOURG STRASBOURG 3123
+msm8x60_fluid MACH_MSM8X60_FLUID MSM8X60_FLUID 3124
+smartqv5 MACH_SMARTQV5 SMARTQV5 3125
+smartqv3 MACH_SMARTQV3 SMARTQV3 3126
+smartqv7 MACH_SMARTQV7 SMARTQV7 3127
+paz00 MACH_PAZ00 PAZ00 3128
+acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129
+htcwillow MACH_HTCWILLOW HTCWILLOW 3130
+fwbd_0404 MACH_FWBD_0404 FWBD_0404 3131
+hdgu MACH_HDGU HDGU 3132
+pyramid MACH_PYRAMID PYRAMID 3133
+epiphan MACH_EPIPHAN EPIPHAN 3134
+omap_bender MACH_OMAP_BENDER OMAP_BENDER 3135
+gurnard MACH_GURNARD GURNARD 3136
+gtl_it5100 MACH_GTL_IT5100 GTL_IT5100 3137
+bcm2708 MACH_BCM2708 BCM2708 3138
+mx51_ggc MACH_MX51_GGC MX51_GGC 3139
+sharespace MACH_SHARESPACE SHARESPACE 3140
+haba_knx_explorer MACH_HABA_KNX_EXPLORER HABA_KNX_EXPLORER 3141
+simtec_kirkmod MACH_SIMTEC_KIRKMOD SIMTEC_KIRKMOD 3142
+crux MACH_CRUX CRUX 3143
+mx51_bravo MACH_MX51_BRAVO MX51_BRAVO 3144
+charon MACH_CHARON CHARON 3145
+picocom3 MACH_PICOCOM3 PICOCOM3 3146
+picocom4 MACH_PICOCOM4 PICOCOM4 3147
+serrano MACH_SERRANO SERRANO 3148
+doubleshot MACH_DOUBLESHOT DOUBLESHOT 3149
+evsy MACH_EVSY EVSY 3150
+huashan MACH_HUASHAN HUASHAN 3151
+lausanne MACH_LAUSANNE LAUSANNE 3152
+emerald MACH_EMERALD EMERALD 3153
+tqma35 MACH_TQMA35 TQMA35 3154
+marvel MACH_MARVEL MARVEL 3155
+manuae MACH_MANUAE MANUAE 3156
+chacha MACH_CHACHA CHACHA 3157
+lemon MACH_LEMON LEMON 3158
+csc MACH_CSC CSC 3159
+gira_knxip_router MACH_GIRA_KNXIP_ROUTER GIRA_KNXIP_ROUTER 3160
+t20 MACH_T20 T20 3161
+hdmini MACH_HDMINI HDMINI 3162
+sciphone_g2 MACH_SCIPHONE_G2 SCIPHONE_G2 3163
+express MACH_EXPRESS EXPRESS 3164
+express_kt MACH_EXPRESS_KT EXPRESS_KT 3165
+maximasp MACH_MAXIMASP MAXIMASP 3166
+nitrogen_imx51 MACH_NITROGEN_IMX51 NITROGEN_IMX51 3167
+nitrogen_imx53 MACH_NITROGEN_IMX53 NITROGEN_IMX53 3168
+sunfire MACH_SUNFIRE SUNFIRE 3169
+arowana MACH_AROWANA AROWANA 3170
+tegra_daytona MACH_TEGRA_DAYTONA TEGRA_DAYTONA 3171
+tegra_swordfish MACH_TEGRA_SWORDFISH TEGRA_SWORDFISH 3172
+edison MACH_EDISON EDISON 3173
+svp8500v1 MACH_SVP8500V1 SVP8500V1 3174
+svp8500v2 MACH_SVP8500V2 SVP8500V2 3175
+svp5500 MACH_SVP5500 SVP5500 3176
+b5500 MACH_B5500 B5500 3177
+s5500 MACH_S5500 S5500 3178
+icon MACH_ICON ICON 3179
+elephant MACH_ELEPHANT ELEPHANT 3180
+msm8x60_fusion MACH_MSM8X60_FUSION MSM8X60_FUSION 3181
+shooter MACH_SHOOTER SHOOTER 3182
+spade_lte MACH_SPADE_LTE SPADE_LTE 3183
+philhwani MACH_PHILHWANI PHILHWANI 3184
+gsncomm MACH_GSNCOMM GSNCOMM 3185
+strasbourg_a2 MACH_STRASBOURG_A2 STRASBOURG_A2 3186
+mmm MACH_MMM MMM 3187
+davinci_dm365_bv MACH_DAVINCI_DM365_BV DAVINCI_DM365_BV 3188
+ag5evm MACH_AG5EVM AG5EVM 3189
+sc575plc MACH_SC575PLC SC575PLC 3190
+sc575hmi MACH_SC575IPC SC575IPC 3191
+omap3_tdm3730 MACH_OMAP3_TDM3730 OMAP3_TDM3730 3192
+g7 MACH_G7 G7 3193
+top9000_eval MACH_TOP9000_EVAL TOP9000_EVAL 3194
+top9000_su MACH_TOP9000_SU TOP9000_SU 3195
+utm300 MACH_UTM300 UTM300 3196
+tsunagi MACH_TSUNAGI TSUNAGI 3197
+ts75xx MACH_TS75XX TS75XX 3198
+msm8x60_fusn_ffa MACH_MSM8X60_FUSN_FFA MSM8X60_FUSN_FFA 3199
+ts47xx MACH_TS47XX TS47XX 3200
+da850_k5 MACH_DA850_K5 DA850_K5 3201
+ax502 MACH_AX502 AX502 3202
+igep0032 MACH_IGEP0032 IGEP0032 3203
+antero MACH_ANTERO ANTERO 3204
+synergy MACH_SYNERGY SYNERGY 3205
+ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206
+wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207
+punica MACH_PUNICA PUNICA 3208
+sbc_nt250 MACH_SBC_NT250 SBC_NT250 3209
+mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210
+mackerel MACH_MACKEREL MACKEREL 3211
+fa9x27 MACH_FA9X27 FA9X27 3213
+ns2816tb MACH_NS2816TB NS2816TB 3214
+ns2816_ntpad MACH_NS2816_NTPAD NS2816_NTPAD 3215
+ns2816_ntnb MACH_NS2816_NTNB NS2816_NTNB 3216
+kaen MACH_KAEN KAEN 3217
+nv1000 MACH_NV1000 NV1000 3218
+nuc950ts MACH_NUC950TS NUC950TS 3219
+nokia_rm680 MACH_NOKIA_RM680 NOKIA_RM680 3220
+ast2200 MACH_AST2200 AST2200 3221
+lead MACH_LEAD LEAD 3222
+unino1 MACH_UNINO1 UNINO1 3223
+greeco MACH_GREECO GREECO 3224
+verdi MACH_VERDI VERDI 3225
+dm6446_adbox MACH_DM6446_ADBOX DM6446_ADBOX 3226
+quad_salsa MACH_QUAD_SALSA QUAD_SALSA 3227
+abb_gma_1_1 MACH_ABB_GMA_1_1 ABB_GMA_1_1 3228
+svcid MACH_SVCID SVCID 3229
+msm8960_sim MACH_MSM8960_SIM MSM8960_SIM 3230
+msm8960_rumi3 MACH_MSM8960_RUMI3 MSM8960_RUMI3 3231
+icon_g MACH_ICON_G ICON_G 3232
+mb3 MACH_MB3 MB3 3233
+gsia18s MACH_GSIA18S GSIA18S 3234
+pivicc MACH_PIVICC PIVICC 3235
+pcm048 MACH_PCM048 PCM048 3236
+dds MACH_DDS DDS 3237
+chalten_xa1 MACH_CHALTEN_XA1 CHALTEN_XA1 3238
diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c
index 0d5d63c..f28dc99 100644
--- a/arch/mn10300/kernel/gdb-io-serial.c
+++ b/arch/mn10300/kernel/gdb-io-serial.c
@@ -73,7 +73,8 @@
GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI;
/* permit level 0 IRQs to take place */
- local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ arch_local_change_intr_mask_level(
+ NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
}
/*
diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c
index 97dfda2..abdeea1 100644
--- a/arch/mn10300/kernel/gdb-io-ttysm.c
+++ b/arch/mn10300/kernel/gdb-io-ttysm.c
@@ -87,7 +87,8 @@
tmp = *gdbstub_port->_control;
/* permit level 0 IRQs only */
- local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ arch_local_change_intr_mask_level(
+ NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
}
/*
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index a5fc3f0..b169d99 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -1194,7 +1194,8 @@
asm volatile("mov mdr,%0" : "=d"(mdr));
local_save_flags(epsw);
- local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ arch_local_change_intr_mask_level(
+ NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
gdbstub_store_fpu();
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 56c8687..7eff9b7 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -19,6 +19,7 @@
#include <linux/kernel_stat.h>
#include <linux/rcupdate.h>
#include <linux/posix-timers.h>
+#include <linux/cpu.h>
#include <asm/s390_ext.h>
#include <asm/timer.h>
@@ -566,6 +567,23 @@
__ctl_set_bit(0,10);
}
+static int __cpuinit s390_nohz_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ struct s390_idle_data *idle;
+ long cpu = (long) hcpu;
+
+ idle = &per_cpu(s390_idle, cpu);
+ switch (action) {
+ case CPU_DYING:
+ case CPU_DYING_FROZEN:
+ idle->nohz_delay = 0;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+
void __init vtime_init(void)
{
/* request the cpu timer external interrupt */
@@ -574,5 +592,6 @@
/* Enable cpu timer interrupts on the boot cpu. */
init_cpu_vtimer();
+ cpu_notifier(s390_nohz_notify, 0);
}
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 7f217b3..2e9d78d 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -22,7 +22,8 @@
select HAVE_SPARSE_IRQ
select RTC_LIB
select GENERIC_ATOMIC64
- select GENERIC_HARDIRQS_NO_DEPRECATED
+ # Support the deprecated APIs until MFD and GPIOLIB catch up.
+ select GENERIC_HARDIRQS_NO_DEPRECATED if !MFD_SUPPORT && !GPIOLIB
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index 903cd618e..d6741fc 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -368,8 +368,9 @@
#define __NR_sendmsg 355
#define __NR_recvmsg 356
#define __NR_recvmmsg 357
+#define __NR_accept4 358
-#define NR_syscalls 358
+#define NR_syscalls 359
#ifdef __KERNEL__
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index e872e81..6fc347e 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -375,3 +375,4 @@
.long sys_sendmsg /* 355 */
.long sys_recvmsg
.long sys_recvmmsg
+ .long sys_accept4
diff --git a/arch/sparc/include/asm/openprom.h b/arch/sparc/include/asm/openprom.h
index 81cd434..47eaafa 100644
--- a/arch/sparc/include/asm/openprom.h
+++ b/arch/sparc/include/asm/openprom.h
@@ -39,7 +39,7 @@
int (*v2_dev_open)(char *devpath);
void (*v2_dev_close)(int d);
int (*v2_dev_read)(int d, char *buf, int nbytes);
- int (*v2_dev_write)(int d, char *buf, int nbytes);
+ int (*v2_dev_write)(int d, const char *buf, int nbytes);
int (*v2_dev_seek)(int d, int hi, int lo);
/* Never issued (multistage load support) */
diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h
index 51296a6..9e5c640 100644
--- a/arch/sparc/include/asm/oplib_32.h
+++ b/arch/sparc/include/asm/oplib_32.h
@@ -60,25 +60,6 @@
extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
-/* Device operations. */
-
-/* Open the device described by the passed string. Note, that the format
- * of the string is different on V0 vs. V2->higher proms. The caller must
- * know what he/she is doing! Returns the device descriptor, an int.
- */
-extern int prom_devopen(char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
- unsigned int seek_lowval);
-
/* Miscellaneous routines, don't really fit in any category per se. */
/* Reboot the machine with the command line passed. */
@@ -121,19 +102,8 @@
/* Get the prom firmware revision. */
extern int prom_getprev(void);
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
+/* Write a buffer of characters to the console. */
+extern void prom_console_write_buf(const char *buf, int len);
/* Prom's internal routines, don't use in kernel/boot code. */
extern void prom_printf(const char *fmt, ...);
@@ -238,7 +208,6 @@
extern int prom_setprop(phandle node, const char *prop_name, char *prop_value,
int value_size);
-extern phandle prom_pathtoinode(char *path);
extern phandle prom_inst2pkg(int);
/* Dorking with Bus ranges... */
diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h
index c9cc078..8cd0df3 100644
--- a/arch/sparc/include/asm/oplib_64.h
+++ b/arch/sparc/include/asm/oplib_64.h
@@ -67,27 +67,6 @@
/* Boot argument acquisition, returns the boot command line string. */
extern char *prom_getbootargs(void);
-/* Device utilities. */
-
-/* Device operations. */
-
-/* Open the device described by the passed string. Note, that the format
- * of the string is different on V0 vs. V2->higher proms. The caller must
- * know what he/she is doing! Returns the device descriptor, an int.
- */
-extern int prom_devopen(const char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
- unsigned int seek_lowval);
-
/* Miscellaneous routines, don't really fit in any category per se. */
/* Reboot the machine with the command line passed. */
@@ -109,33 +88,14 @@
/* Halt and power-off the machine. */
extern void prom_halt_power_off(void) __attribute__ ((noreturn));
-/* Set the PROM 'sync' callback function to the passed function pointer.
- * When the user gives the 'sync' command at the prom prompt while the
- * kernel is still active, the prom will call this routine.
- *
- */
-typedef int (*callback_func_t)(long *cmd);
-extern void prom_setcallback(callback_func_t func_ptr);
-
/* Acquire the IDPROM of the root node in the prom device tree. This
* gets passed a buffer where you would like it stuffed. The return value
* is the format type of this idprom or 0xff on error.
*/
extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
+/* Write a buffer of characters to the console. */
+extern void prom_console_write_buf(const char *buf, int len);
/* Prom's internal routines, don't use in kernel/boot code. */
extern void prom_printf(const char *fmt, ...);
@@ -279,9 +239,7 @@
extern int prom_setprop(phandle node, const char *prop_name, char *prop_value,
int value_size);
-extern phandle prom_pathtoinode(const char *path);
extern phandle prom_inst2pkg(int);
-extern int prom_service_exists(const char *service_name);
extern void prom_sun4v_guest_soft_state(void);
extern int prom_ihandle2path(int handle, char *buffer, int bufsize);
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index 2d51527..f01c426 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -114,7 +114,7 @@
if (leon3_gptimer_regs && leon3_irqctrl_regs) {
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].val, 0);
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].rld,
- (((1000000 / 100) - 1)));
+ (((1000000 / HZ) - 1)));
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0);
#ifdef CONFIG_SMP
@@ -128,7 +128,7 @@
}
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].val, 0);
- LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/100) - 1)));
+ LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/HZ) - 1)));
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl, 0);
# endif
diff --git a/arch/sparc/prom/Makefile b/arch/sparc/prom/Makefile
index 1b8c073..816c0fa 100644
--- a/arch/sparc/prom/Makefile
+++ b/arch/sparc/prom/Makefile
@@ -6,7 +6,6 @@
lib-y := bootstr_$(BITS).o
lib-$(CONFIG_SPARC32) += devmap.o
-lib-y += devops_$(BITS).o
lib-y += init_$(BITS).o
lib-$(CONFIG_SPARC32) += memory.o
lib-y += misc_$(BITS).o
diff --git a/arch/sparc/prom/console_32.c b/arch/sparc/prom/console_32.c
index 5340264..4886310 100644
--- a/arch/sparc/prom/console_32.c
+++ b/arch/sparc/prom/console_32.c
@@ -16,63 +16,26 @@
extern void restore_current(void);
-/* Non blocking get character from console input device, returns -1
- * if no input was taken. This can be used for polling.
- */
-int
-prom_nbgetchar(void)
-{
- static char inc;
- int i = -1;
- unsigned long flags;
-
- spin_lock_irqsave(&prom_lock, flags);
- switch(prom_vers) {
- case PROM_V0:
- i = (*(romvec->pv_nbgetchar))();
- break;
- case PROM_V2:
- case PROM_V3:
- if( (*(romvec->pv_v2devops).v2_dev_read)(*romvec->pv_v2bootargs.fd_stdin , &inc, 0x1) == 1) {
- i = inc;
- } else {
- i = -1;
- }
- break;
- default:
- i = -1;
- break;
- };
- restore_current();
- spin_unlock_irqrestore(&prom_lock, flags);
- return i; /* Ugh, we could spin forever on unsupported proms ;( */
-}
-
/* Non blocking put character to console device, returns -1 if
* unsuccessful.
*/
-int
-prom_nbputchar(char c)
+static int prom_nbputchar(const char *buf)
{
- static char outc;
unsigned long flags;
int i = -1;
spin_lock_irqsave(&prom_lock, flags);
switch(prom_vers) {
case PROM_V0:
- i = (*(romvec->pv_nbputchar))(c);
+ i = (*(romvec->pv_nbputchar))(*buf);
break;
case PROM_V2:
case PROM_V3:
- outc = c;
- if( (*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout, &outc, 0x1) == 1)
+ if ((*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout,
+ buf, 0x1) == 1)
i = 0;
- else
- i = -1;
break;
default:
- i = -1;
break;
};
restore_current();
@@ -80,18 +43,14 @@
return i; /* Ugh, we could spin forever on unsupported proms ;( */
}
-/* Blocking version of get character routine above. */
-char
-prom_getchar(void)
+void prom_console_write_buf(const char *buf, int len)
{
- int character;
- while((character = prom_nbgetchar()) == -1) ;
- return (char) character;
+ while (len) {
+ int n = prom_nbputchar(buf);
+ if (n)
+ continue;
+ len--;
+ buf++;
+ }
}
-/* Blocking version of put character routine above. */
-void
-prom_putchar(char c)
-{
- while(prom_nbputchar(c) == -1) ;
-}
diff --git a/arch/sparc/prom/console_64.c b/arch/sparc/prom/console_64.c
index 10322dc..ed39e75 100644
--- a/arch/sparc/prom/console_64.c
+++ b/arch/sparc/prom/console_64.c
@@ -15,85 +15,34 @@
extern int prom_stdin, prom_stdout;
-/* Non blocking get character from console input device, returns -1
- * if no input was taken. This can be used for polling.
- */
-inline int
-prom_nbgetchar(void)
+static int __prom_console_write_buf(const char *buf, int len)
{
unsigned long args[7];
- char inc;
-
- args[0] = (unsigned long) "read";
- args[1] = 3;
- args[2] = 1;
- args[3] = (unsigned int) prom_stdin;
- args[4] = (unsigned long) &inc;
- args[5] = 1;
- args[6] = (unsigned long) -1;
-
- p1275_cmd_direct(args);
-
- if (args[6] == 1)
- return inc;
- return -1;
-}
-
-/* Non blocking put character to console device, returns -1 if
- * unsuccessful.
- */
-inline int
-prom_nbputchar(char c)
-{
- unsigned long args[7];
- char outc;
-
- outc = c;
+ int ret;
args[0] = (unsigned long) "write";
args[1] = 3;
args[2] = 1;
args[3] = (unsigned int) prom_stdout;
- args[4] = (unsigned long) &outc;
- args[5] = 1;
+ args[4] = (unsigned long) buf;
+ args[5] = (unsigned int) len;
args[6] = (unsigned long) -1;
p1275_cmd_direct(args);
- if (args[6] == 1)
- return 0;
- else
+ ret = (int) args[6];
+ if (ret < 0)
return -1;
+ return ret;
}
-/* Blocking version of get character routine above. */
-char
-prom_getchar(void)
+void prom_console_write_buf(const char *buf, int len)
{
- int character;
- while((character = prom_nbgetchar()) == -1) ;
- return (char) character;
-}
-
-/* Blocking version of put character routine above. */
-void
-prom_putchar(char c)
-{
- prom_nbputchar(c);
-}
-
-void
-prom_puts(const char *s, int len)
-{
- unsigned long args[7];
-
- args[0] = (unsigned long) "write";
- args[1] = 3;
- args[2] = 1;
- args[3] = (unsigned int) prom_stdout;
- args[4] = (unsigned long) s;
- args[5] = len;
- args[6] = (unsigned long) -1;
-
- p1275_cmd_direct(args);
+ while (len) {
+ int n = __prom_console_write_buf(buf, len);
+ if (n < 0)
+ continue;
+ len -= n;
+ buf += len;
+ }
}
diff --git a/arch/sparc/prom/devops_32.c b/arch/sparc/prom/devops_32.c
deleted file mode 100644
index 9c5d468..0000000
--- a/arch/sparc/prom/devops_32.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * devops.c: Device operations using the PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-extern void restore_current(void);
-
-/* Open the device described by the string 'dstr'. Returns the handle
- * to that device used for subsequent operations on that device.
- * Returns -1 on failure.
- */
-int
-prom_devopen(char *dstr)
-{
- int handle;
- unsigned long flags;
- spin_lock_irqsave(&prom_lock, flags);
- switch(prom_vers) {
- case PROM_V0:
- handle = (*(romvec->pv_v0devops.v0_devopen))(dstr);
- if(handle == 0) handle = -1;
- break;
- case PROM_V2:
- case PROM_V3:
- handle = (*(romvec->pv_v2devops.v2_dev_open))(dstr);
- break;
- default:
- handle = -1;
- break;
- };
- restore_current();
- spin_unlock_irqrestore(&prom_lock, flags);
-
- return handle;
-}
-
-/* Close the device described by device handle 'dhandle'. */
-int
-prom_devclose(int dhandle)
-{
- unsigned long flags;
- spin_lock_irqsave(&prom_lock, flags);
- switch(prom_vers) {
- case PROM_V0:
- (*(romvec->pv_v0devops.v0_devclose))(dhandle);
- break;
- case PROM_V2:
- case PROM_V3:
- (*(romvec->pv_v2devops.v2_dev_close))(dhandle);
- break;
- default:
- break;
- };
- restore_current();
- spin_unlock_irqrestore(&prom_lock, flags);
- return 0;
-}
-
-/* Seek to specified location described by 'seekhi' and 'seeklo'
- * for device 'dhandle'.
- */
-void
-prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo)
-{
- unsigned long flags;
- spin_lock_irqsave(&prom_lock, flags);
- switch(prom_vers) {
- case PROM_V0:
- (*(romvec->pv_v0devops.v0_seekdev))(dhandle, seekhi, seeklo);
- break;
- case PROM_V2:
- case PROM_V3:
- (*(romvec->pv_v2devops.v2_dev_seek))(dhandle, seekhi, seeklo);
- break;
- default:
- break;
- };
- restore_current();
- spin_unlock_irqrestore(&prom_lock, flags);
-}
diff --git a/arch/sparc/prom/devops_64.c b/arch/sparc/prom/devops_64.c
deleted file mode 100644
index a017119..0000000
--- a/arch/sparc/prom/devops_64.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * devops.c: Device operations using the PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-/* Open the device described by the string 'dstr'. Returns the handle
- * to that device used for subsequent operations on that device.
- * Returns 0 on failure.
- */
-int
-prom_devopen(const char *dstr)
-{
- unsigned long args[5];
-
- args[0] = (unsigned long) "open";
- args[1] = 1;
- args[2] = 1;
- args[3] = (unsigned long) dstr;
- args[4] = (unsigned long) -1;
-
- p1275_cmd_direct(args);
-
- return (int) args[4];
-}
-
-/* Close the device described by device handle 'dhandle'. */
-int
-prom_devclose(int dhandle)
-{
- unsigned long args[4];
-
- args[0] = (unsigned long) "close";
- args[1] = 1;
- args[2] = 0;
- args[3] = (unsigned int) dhandle;
-
- p1275_cmd_direct(args);
-
- return 0;
-}
-
-/* Seek to specified location described by 'seekhi' and 'seeklo'
- * for device 'dhandle'.
- */
-void
-prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo)
-{
- unsigned long args[7];
-
- args[0] = (unsigned long) "seek";
- args[1] = 3;
- args[2] = 1;
- args[3] = (unsigned int) dhandle;
- args[4] = seekhi;
- args[5] = seeklo;
- args[6] = (unsigned long) -1;
-
- p1275_cmd_direct(args);
-}
diff --git a/arch/sparc/prom/misc_64.c b/arch/sparc/prom/misc_64.c
index d24bc44..e4f31d4 100644
--- a/arch/sparc/prom/misc_64.c
+++ b/arch/sparc/prom/misc_64.c
@@ -18,7 +18,7 @@
#include <asm/system.h>
#include <asm/ldc.h>
-int prom_service_exists(const char *service_name)
+static int prom_service_exists(const char *service_name)
{
unsigned long args[5];
@@ -150,20 +150,6 @@
prom_halt();
}
-/* Set prom sync handler to call function 'funcp'. */
-void prom_setcallback(callback_func_t funcp)
-{
- unsigned long args[5];
- if (!funcp)
- return;
- args[0] = (unsigned long) "set-callback";
- args[1] = 1;
- args[2] = 1;
- args[3] = (unsigned long) funcp;
- args[4] = (unsigned long) -1;
- p1275_cmd_direct(args);
-}
-
/* Get the idprom and stuff it into buffer 'idbuf'. Returns the
* format type. 'num_bytes' is the number of bytes that your idbuf
* has space for. Returns 0xff on error.
diff --git a/arch/sparc/prom/printf.c b/arch/sparc/prom/printf.c
index ca86926..d9682f0 100644
--- a/arch/sparc/prom/printf.c
+++ b/arch/sparc/prom/printf.c
@@ -15,22 +15,45 @@
#include <linux/kernel.h>
#include <linux/compiler.h>
+#include <linux/spinlock.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
+#define CONSOLE_WRITE_BUF_SIZE 1024
+
static char ppbuf[1024];
+static char console_write_buf[CONSOLE_WRITE_BUF_SIZE];
+static DEFINE_RAW_SPINLOCK(console_write_lock);
void notrace prom_write(const char *buf, unsigned int n)
{
- char ch;
+ unsigned int dest_len;
+ unsigned long flags;
+ char *dest;
- while (n != 0) {
- --n;
- if ((ch = *buf++) == '\n')
- prom_putchar('\r');
- prom_putchar(ch);
+ dest = console_write_buf;
+ raw_spin_lock_irqsave(&console_write_lock, flags);
+
+ dest_len = 0;
+ while (n-- != 0) {
+ char ch = *buf++;
+ if (ch == '\n') {
+ *dest++ = '\r';
+ dest_len++;
+ }
+ *dest++ = ch;
+ dest_len++;
+ if (dest_len >= CONSOLE_WRITE_BUF_SIZE - 1) {
+ prom_console_write_buf(console_write_buf, dest_len);
+ dest = console_write_buf;
+ dest_len = 0;
+ }
}
+ if (dest_len)
+ prom_console_write_buf(console_write_buf, dest_len);
+
+ raw_spin_unlock_irqrestore(&console_write_lock, flags);
}
void notrace prom_printf(const char *fmt, ...)
diff --git a/arch/sparc/prom/tree_32.c b/arch/sparc/prom/tree_32.c
index 63e08e1..535e2e6 100644
--- a/arch/sparc/prom/tree_32.c
+++ b/arch/sparc/prom/tree_32.c
@@ -342,19 +342,3 @@
if (node == -1) return 0;
return node;
}
-
-/* Return 'node' assigned to a particular prom 'path'
- * FIXME: Should work for v0 as well
- */
-phandle prom_pathtoinode(char *path)
-{
- phandle node;
- int inst;
-
- inst = prom_devopen (path);
- if (inst == -1) return 0;
- node = prom_inst2pkg (inst);
- prom_devclose (inst);
- if (node == -1) return 0;
- return node;
-}
diff --git a/arch/sparc/prom/tree_64.c b/arch/sparc/prom/tree_64.c
index 691be68..d936600 100644
--- a/arch/sparc/prom/tree_64.c
+++ b/arch/sparc/prom/tree_64.c
@@ -374,24 +374,6 @@
return node;
}
-/* Return 'node' assigned to a particular prom 'path'
- * FIXME: Should work for v0 as well
- */
-phandle prom_pathtoinode(const char *path)
-{
- phandle node;
- int inst;
-
- inst = prom_devopen (path);
- if (inst == 0)
- return 0;
- node = prom_inst2pkg(inst);
- prom_devclose(inst);
- if (node == -1)
- return 0;
- return node;
-}
-
int prom_ihandle2path(int handle, char *buffer, int bufsize)
{
unsigned long args[7];
diff --git a/arch/x86/crypto/ghash-clmulni-intel_glue.c b/arch/x86/crypto/ghash-clmulni-intel_glue.c
index cbcc8d8..7a6e68e 100644
--- a/arch/x86/crypto/ghash-clmulni-intel_glue.c
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -10,6 +10,7 @@
* by the Free Software Foundation.
*/
+#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h
index 7f7e577..31d84ac 100644
--- a/arch/x86/include/asm/pvclock.h
+++ b/arch/x86/include/asm/pvclock.h
@@ -11,6 +11,7 @@
void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
struct pvclock_vcpu_time_info *vcpu,
struct timespec *ts);
+void pvclock_resume(void);
/*
* Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 008b91e..42eb330 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -83,6 +83,11 @@
static atomic64_t last_value = ATOMIC64_INIT(0);
+void pvclock_resume(void)
+{
+ atomic64_set(&last_value, 0);
+}
+
cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
{
struct pvclock_shadow_time shadow;
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index b2bb5aa3..5da5e53 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -426,6 +426,8 @@
{
int cpu;
+ pvclock_resume();
+
if (xen_clockevent != &xen_vcpuop_clockevent)
return;
diff --git a/block/bsg.c b/block/bsg.c
index f20d6a7..0c8b64a 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -250,6 +250,14 @@
int ret, rw;
unsigned int dxfer_len;
void *dxferp = NULL;
+ struct bsg_class_device *bcd = &q->bsg_dev;
+
+ /* if the LLD has been removed then the bsg_unregister_queue will
+ * eventually be called and the class_dev was freed, so we can no
+ * longer use this request_queue. Return no such address.
+ */
+ if (!bcd->class_dev)
+ return ERR_PTR(-ENXIO);
dprintk("map hdr %llx/%u %llx/%u\n", (unsigned long long) hdr->dout_xferp,
hdr->dout_xfer_len, (unsigned long long) hdr->din_xferp,
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index ba9afea..25d3aae 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -100,24 +100,7 @@
.release = single_release,
};
#endif
-static int get_ac_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
-{
- struct acpi_ac *ac = to_acpi_ac(psy);
- switch (psp) {
- case POWER_SUPPLY_PROP_ONLINE:
- val->intval = ac->state;
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-static enum power_supply_property ac_props[] = {
- POWER_SUPPLY_PROP_ONLINE,
-};
/* --------------------------------------------------------------------------
AC Adapter Management
-------------------------------------------------------------------------- */
@@ -140,6 +123,35 @@
return 0;
}
+/* --------------------------------------------------------------------------
+ sysfs I/F
+ -------------------------------------------------------------------------- */
+static int get_ac_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct acpi_ac *ac = to_acpi_ac(psy);
+
+ if (!ac)
+ return -ENODEV;
+
+ if (acpi_ac_get_state(ac))
+ return -ENODEV;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = ac->state;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static enum power_supply_property ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
#ifdef CONFIG_ACPI_PROCFS_POWER
/* --------------------------------------------------------------------------
FS Interface (/proc)
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 1211c03..5850d32 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -86,7 +86,7 @@
* It is used to provide exclusive accessing for ERST Error Log
* Address Range too.
*/
-static DEFINE_SPINLOCK(erst_lock);
+static DEFINE_RAW_SPINLOCK(erst_lock);
static inline int erst_errno(int command_status)
{
@@ -421,9 +421,9 @@
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
count = __erst_get_record_count();
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return count;
}
@@ -456,9 +456,9 @@
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
rc = __erst_get_next_record_id(record_id);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
@@ -624,17 +624,17 @@
return -EINVAL;
if (erst_erange.attr & ERST_RANGE_NVRAM) {
- if (!spin_trylock_irqsave(&erst_lock, flags))
+ if (!raw_spin_trylock_irqsave(&erst_lock, flags))
return -EBUSY;
rc = __erst_write_to_nvram(record);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
if (record->record_length > erst_erange.size)
return -EINVAL;
- if (!spin_trylock_irqsave(&erst_lock, flags))
+ if (!raw_spin_trylock_irqsave(&erst_lock, flags))
return -EBUSY;
memcpy(erst_erange.vaddr, record, record->record_length);
rcd_erange = erst_erange.vaddr;
@@ -642,7 +642,7 @@
memcpy(&rcd_erange->persistence_information, "ER", 2);
rc = __erst_write_to_storage(0);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
@@ -696,9 +696,9 @@
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
len = __erst_read(record_id, record, buflen);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return len;
}
EXPORT_SYMBOL_GPL(erst_read);
@@ -719,20 +719,20 @@
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
rc = __erst_get_next_record_id(&record_id);
if (rc) {
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
/* no more record */
if (record_id == APEI_ERST_INVALID_RECORD_ID) {
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return 0;
}
len = __erst_read(record_id, record, buflen);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return len;
}
@@ -746,12 +746,12 @@
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
if (erst_erange.attr & ERST_RANGE_NVRAM)
rc = __erst_clear_from_nvram(record_id);
else
rc = __erst_clear_from_storage(record_id);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c
index 1a3508a..daa7bc6 100644
--- a/drivers/acpi/apei/hest.c
+++ b/drivers/acpi/apei/hest.c
@@ -46,9 +46,9 @@
/* HEST table parsing */
-static struct acpi_table_hest *hest_tab;
+static struct acpi_table_hest *__read_mostly hest_tab;
-static int hest_esrc_len_tab[ACPI_HEST_TYPE_RESERVED] = {
+static const int hest_esrc_len_tab[ACPI_HEST_TYPE_RESERVED] = {
[ACPI_HEST_TYPE_IA32_CHECK] = -1, /* need further calculation */
[ACPI_HEST_TYPE_IA32_CORRECTED_CHECK] = -1,
[ACPI_HEST_TYPE_IA32_NMI] = sizeof(struct acpi_hest_ia_nmi),
@@ -126,7 +126,7 @@
unsigned int count;
};
-static int hest_parse_ghes_count(struct acpi_hest_header *hest_hdr, void *data)
+static int __init hest_parse_ghes_count(struct acpi_hest_header *hest_hdr, void *data)
{
int *count = data;
@@ -135,7 +135,7 @@
return 0;
}
-static int hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data)
+static int __init hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data)
{
struct platform_device *ghes_dev;
struct ghes_arr *ghes_arr = data;
@@ -165,7 +165,7 @@
return rc;
}
-static int hest_ghes_dev_register(unsigned int ghes_count)
+static int __init hest_ghes_dev_register(unsigned int ghes_count)
{
int rc, i;
struct ghes_arr ghes_arr;
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 95649d3..9fb9d5a 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -130,6 +130,8 @@
unsigned long flags;
};
+static int acpi_battery_update(struct acpi_battery *battery);
+
#define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
inline int acpi_battery_present(struct acpi_battery *battery)
@@ -184,6 +186,9 @@
int ret = 0;
struct acpi_battery *battery = to_acpi_battery(psy);
+ if (acpi_battery_update(battery))
+ return -ENODEV;
+
if (acpi_battery_present(battery)) {
/* run battery update only if it is present */
acpi_battery_get_state(battery);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 372ff80..302b31e 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -934,6 +934,9 @@
ec_flag_msi, "MSI hardware", {
DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-Star")}, NULL},
{
+ ec_flag_msi, "MSI hardware", {
+ DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR")}, NULL},
+ {
ec_validate_ecdt, "ASUS hardware", {
DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL},
{},
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 966fedd..055d7b7 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -110,9 +110,6 @@
static LIST_HEAD(acpi_ioremaps);
static DEFINE_SPINLOCK(acpi_ioremap_lock);
-#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */
-static char osi_setup_string[OSI_STRING_LENGTH_MAX];
-
static void __init acpi_osi_setup_late(void);
/*
@@ -152,8 +149,7 @@
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
- unsigned int known:1;
-} osi_linux = { 0, 0, 0, 0};
+} osi_linux = {0, 0, 0};
static u32 acpi_osi_handler(acpi_string interface, u32 supported)
{
@@ -1055,13 +1051,53 @@
__setup("acpi_os_name=", acpi_os_name_setup);
+#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */
+#define OSI_STRING_ENTRIES_MAX 16 /* arbitrary */
+
+struct osi_setup_entry {
+ char string[OSI_STRING_LENGTH_MAX];
+ bool enable;
+};
+
+static struct osi_setup_entry __initdata osi_setup_entries[OSI_STRING_ENTRIES_MAX];
+
+void __init acpi_osi_setup(char *str)
+{
+ struct osi_setup_entry *osi;
+ bool enable = true;
+ int i;
+
+ if (!acpi_gbl_create_osi_method)
+ return;
+
+ if (str == NULL || *str == '\0') {
+ printk(KERN_INFO PREFIX "_OSI method disabled\n");
+ acpi_gbl_create_osi_method = FALSE;
+ return;
+ }
+
+ if (*str == '!') {
+ str++;
+ enable = false;
+ }
+
+ for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
+ osi = &osi_setup_entries[i];
+ if (!strcmp(osi->string, str)) {
+ osi->enable = enable;
+ break;
+ } else if (osi->string[0] == '\0') {
+ osi->enable = enable;
+ strncpy(osi->string, str, OSI_STRING_LENGTH_MAX);
+ break;
+ }
+ }
+}
+
static void __init set_osi_linux(unsigned int enable)
{
- if (osi_linux.enable != enable) {
+ if (osi_linux.enable != enable)
osi_linux.enable = enable;
- printk(KERN_NOTICE PREFIX "%sed _OSI(Linux)\n",
- enable ? "Add": "Delet");
- }
if (osi_linux.enable)
acpi_osi_setup("Linux");
@@ -1073,7 +1109,8 @@
static void __init acpi_cmdline_osi_linux(unsigned int enable)
{
- osi_linux.cmdline = 1; /* cmdline set the default */
+ osi_linux.cmdline = 1; /* cmdline set the default and override DMI */
+ osi_linux.dmi = 0;
set_osi_linux(enable);
return;
@@ -1081,15 +1118,12 @@
void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d)
{
- osi_linux.dmi = 1; /* DMI knows that this box asks OSI(Linux) */
-
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
if (enable == -1)
return;
- osi_linux.known = 1; /* DMI knows which OSI(Linux) default needed */
-
+ osi_linux.dmi = 1; /* DMI knows that this box asks OSI(Linux) */
set_osi_linux(enable);
return;
@@ -1104,37 +1138,44 @@
*/
static void __init acpi_osi_setup_late(void)
{
- char *str = osi_setup_string;
+ struct osi_setup_entry *osi;
+ char *str;
+ int i;
+ acpi_status status;
- if (*str == '\0')
- return;
+ for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
+ osi = &osi_setup_entries[i];
+ str = osi->string;
- if (!strcmp("!Linux", str)) {
- acpi_cmdline_osi_linux(0); /* !enable */
- } else if (*str == '!') {
- if (acpi_remove_interface(++str) == AE_OK)
- printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str);
- } else if (!strcmp("Linux", str)) {
- acpi_cmdline_osi_linux(1); /* enable */
- } else {
- if (acpi_install_interface(str) == AE_OK)
- printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
+ if (*str == '\0')
+ break;
+ if (osi->enable) {
+ status = acpi_install_interface(str);
+
+ if (ACPI_SUCCESS(status))
+ printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
+ } else {
+ status = acpi_remove_interface(str);
+
+ if (ACPI_SUCCESS(status))
+ printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str);
+ }
}
}
-int __init acpi_osi_setup(char *str)
+static int __init osi_setup(char *str)
{
- if (str == NULL || *str == '\0') {
- printk(KERN_INFO PREFIX "_OSI method disabled\n");
- acpi_gbl_create_osi_method = FALSE;
- } else {
- strncpy(osi_setup_string, str, OSI_STRING_LENGTH_MAX);
- }
+ if (str && !strcmp("Linux", str))
+ acpi_cmdline_osi_linux(1);
+ else if (str && !strcmp("!Linux", str))
+ acpi_cmdline_osi_linux(0);
+ else
+ acpi_osi_setup(str);
return 1;
}
-__setup("acpi_osi=", acpi_osi_setup);
+__setup("acpi_osi=", osi_setup);
/* enable serialization to combat AE_ALREADY_EXISTS errors */
static int __init acpi_serialize_setup(char *str)
@@ -1530,7 +1571,7 @@
return AE_OK;
}
-acpi_status acpi_os_initialize1(void)
+acpi_status __init acpi_os_initialize1(void)
{
kacpid_wq = create_workqueue("kacpid");
kacpi_notify_wq = create_workqueue("kacpi_notify");
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 67dedee..4c9c2fb 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -213,11 +213,13 @@
resource->name));
} else {
result = __acpi_power_on(resource);
+ if (result)
+ resource->ref_count--;
}
mutex_unlock(&resource->resource_lock);
- return 0;
+ return result;
}
static int acpi_power_off_device(acpi_handle handle)
@@ -465,10 +467,12 @@
struct acpi_handle_list *tl = NULL; /* Target Resources */
int i = 0;
-
if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3))
return -EINVAL;
+ if (device->power.state == state)
+ return 0;
+
if ((device->power.state < ACPI_STATE_D0)
|| (device->power.state > ACPI_STATE_D3))
return -ENODEV;
@@ -488,10 +492,6 @@
goto end;
}
- if (device->power.state == state) {
- goto end;
- }
-
/*
* Then we dereference all power resources used in the current list.
*/
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index fde49b9..79cb653 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -156,15 +156,6 @@
return 0;
}
-static int acpi_thermal_cpufreq_increase(unsigned int cpu)
-{
- return -ENODEV;
-}
-static int acpi_thermal_cpufreq_decrease(unsigned int cpu)
-{
- return -ENODEV;
-}
-
#endif
int acpi_processor_get_limit_info(struct acpi_processor *pr)
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 721d93b..febb153 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -27,8 +27,6 @@
static u8 sleep_states[ACPI_S_STATE_COUNT];
-static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-
static void acpi_sleep_tts_switch(u32 acpi_state)
{
union acpi_object in_arg = { ACPI_TYPE_INTEGER };
@@ -81,6 +79,8 @@
}
#ifdef CONFIG_ACPI_SLEEP
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
/*
* The ACPI specification wants us to save NVS memory regions during hibernation
* and to restore them during the subsequent resume. Windows does that also for
@@ -427,6 +427,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
},
},
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-NW130D",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
diff --git a/drivers/atm/adummy.c b/drivers/atm/adummy.c
index 46b9476..f9b983a 100644
--- a/drivers/atm/adummy.c
+++ b/drivers/atm/adummy.c
@@ -154,7 +154,7 @@
err = -ENOMEM;
goto out;
}
- atm_dev = atm_dev_register(DEV_LABEL, &adummy_ops, -1, NULL);
+ atm_dev = atm_dev_register(DEV_LABEL, NULL, &adummy_ops, -1, NULL);
if (!atm_dev) {
printk(KERN_ERR DEV_LABEL ": atm_dev_register() failed\n");
err = -ENODEV;
diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
index a33896a..ffe9b65 100644
--- a/drivers/atm/ambassador.c
+++ b/drivers/atm/ambassador.c
@@ -2244,7 +2244,8 @@
goto out_reset;
}
- dev->atm_dev = atm_dev_register (DEV_LABEL, &amb_ops, -1, NULL);
+ dev->atm_dev = atm_dev_register (DEV_LABEL, &pci_dev->dev, &amb_ops, -1,
+ NULL);
if (!dev->atm_dev) {
PRINTD (DBG_ERR, "failed to register Madge ATM adapter");
err = -EINVAL;
diff --git a/drivers/atm/atmtcp.c b/drivers/atm/atmtcp.c
index b910181..2b464b6 100644
--- a/drivers/atm/atmtcp.c
+++ b/drivers/atm/atmtcp.c
@@ -366,7 +366,7 @@
if (!dev_data)
return -ENOMEM;
- dev = atm_dev_register(DEV_LABEL,&atmtcp_v_dev_ops,itf,NULL);
+ dev = atm_dev_register(DEV_LABEL,NULL,&atmtcp_v_dev_ops,itf,NULL);
if (!dev) {
kfree(dev_data);
return itf == -1 ? -ENOMEM : -EBUSY;
diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 97c5898..c495fae 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -2244,7 +2244,7 @@
&zeroes);
if (!cpu_zeroes) goto out1;
}
- dev = atm_dev_register(DEV_LABEL,&ops,-1,NULL);
+ dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL);
if (!dev) goto out2;
pci_set_drvdata(pci_dev, dev);
eni_dev->pci_dev = pci_dev;
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 5d86bb8..7d912baf 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -1911,7 +1911,7 @@
fs_dev, sizeof (struct fs_dev));
if (!fs_dev)
goto err_out;
- atm_dev = atm_dev_register("fs", &ops, -1, NULL);
+ atm_dev = atm_dev_register("fs", &pci_dev->dev, &ops, -1, NULL);
if (!atm_dev)
goto err_out_free_fs_dev;
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index c8fc69c..962c309 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -2567,14 +2567,14 @@
static int __devinit
-fore200e_register(struct fore200e* fore200e)
+fore200e_register(struct fore200e* fore200e, struct device *parent)
{
struct atm_dev* atm_dev;
DPRINTK(2, "device %s being registered\n", fore200e->name);
- atm_dev = atm_dev_register(fore200e->bus->proc_name, &fore200e_ops, -1,
- NULL);
+ atm_dev = atm_dev_register(fore200e->bus->proc_name, parent, &fore200e_ops,
+ -1, NULL);
if (atm_dev == NULL) {
printk(FORE200E "unable to register device %s\n", fore200e->name);
return -ENODEV;
@@ -2594,9 +2594,9 @@
static int __devinit
-fore200e_init(struct fore200e* fore200e)
+fore200e_init(struct fore200e* fore200e, struct device *parent)
{
- if (fore200e_register(fore200e) < 0)
+ if (fore200e_register(fore200e, parent) < 0)
return -ENODEV;
if (fore200e->bus->configure(fore200e) < 0)
@@ -2662,7 +2662,7 @@
sprintf(fore200e->name, "%s-%d", bus->model_name, index);
- err = fore200e_init(fore200e);
+ err = fore200e_init(fore200e, &op->dev);
if (err < 0) {
fore200e_shutdown(fore200e);
kfree(fore200e);
@@ -2740,7 +2740,7 @@
sprintf(fore200e->name, "%s-%d", bus->model_name, index);
- err = fore200e_init(fore200e);
+ err = fore200e_init(fore200e, &pci_dev->dev);
if (err < 0) {
fore200e_shutdown(fore200e);
goto out_free;
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 801e8b6..6cf59bf 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -366,7 +366,7 @@
goto init_one_failure;
}
- atm_dev = atm_dev_register(DEV_LABEL, &he_ops, -1, NULL);
+ atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &he_ops, -1, NULL);
if (!atm_dev) {
err = -ENODEV;
goto init_one_failure;
diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c
index a957904..24761e1 100644
--- a/drivers/atm/horizon.c
+++ b/drivers/atm/horizon.c
@@ -2733,7 +2733,8 @@
PRINTD(DBG_INFO, "found Madge ATM adapter (hrz) at: IO %x, IRQ %u, MEM %p",
iobase, irq, membase);
- dev->atm_dev = atm_dev_register(DEV_LABEL, &hrz_ops, -1, NULL);
+ dev->atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &hrz_ops, -1,
+ NULL);
if (!(dev->atm_dev)) {
PRINTD(DBG_ERR, "failed to register Madge ATM adapter");
err = -EINVAL;
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index bce5732..bfb7fee 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -3698,7 +3698,8 @@
goto err_out_iounmap;
}
- dev = atm_dev_register("idt77252", &idt77252_ops, -1, NULL);
+ dev = atm_dev_register("idt77252", &pcidev->dev, &idt77252_ops, -1,
+ NULL);
if (!dev) {
printk("%s: can't register atm device\n", card->name);
err = -EIO;
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 9309d47..7292540 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -3172,7 +3172,7 @@
ret = -ENODEV;
goto err_out_free_iadev;
}
- dev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+ dev = atm_dev_register(DEV_LABEL, &pdev->dev, &ops, -1, NULL);
if (!dev) {
ret = -ENOMEM;
goto err_out_disable_dev;
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index cbe15a8..a395c9a 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -2591,7 +2591,7 @@
return -ENOMEM;
}
- atmdev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+ atmdev = atm_dev_register(DEV_LABEL, &pci->dev, &ops, -1, NULL);
if (atmdev == NULL) {
printk(KERN_ERR DEV_LABEL
": couldn't register atm device!\n");
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 2f3516b..6b313ee 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -771,7 +771,8 @@
}
/* Register device */
- card->atmdev = atm_dev_register("nicstar", &atm_ops, -1, NULL);
+ card->atmdev = atm_dev_register("nicstar", &card->pcidev->dev, &atm_ops,
+ -1, NULL);
if (card->atmdev == NULL) {
printk("nicstar%d: can't register device.\n", i);
error = 17;
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 2e08c99..73fb1c4 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -166,7 +166,7 @@
static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
static int list_vccs(int vci);
static void release_vccs(struct atm_dev *dev);
-static int atm_init(struct solos_card *);
+static int atm_init(struct solos_card *, struct device *);
static void atm_remove(struct solos_card *);
static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
static void solos_bh(unsigned long);
@@ -1210,7 +1210,7 @@
if (db_firmware_upgrade)
flash_upgrade(card, 3);
- err = atm_init(card);
+ err = atm_init(card, &dev->dev);
if (err)
goto out_free_irq;
@@ -1233,7 +1233,7 @@
return err;
}
-static int atm_init(struct solos_card *card)
+static int atm_init(struct solos_card *card, struct device *parent)
{
int i;
@@ -1244,7 +1244,7 @@
skb_queue_head_init(&card->tx_queue[i]);
skb_queue_head_init(&card->cli_queue[i]);
- card->atmdev[i] = atm_dev_register("solos-pci", &fpga_ops, -1, NULL);
+ card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
if (!card->atmdev[i]) {
dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
atm_remove(card);
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index 4e885d2..6249179 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -1597,7 +1597,7 @@
goto out;
}
- dev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+ dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL);
if (!dev)
goto out_free;
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 4f9e22f..657873e 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -72,7 +72,7 @@
static DEFINE_MUTEX(blkfront_mutex);
static const struct block_device_operations xlvbd_block_fops;
-#define BLK_RING_SIZE __RING_SIZE((struct blkif_sring *)0, PAGE_SIZE)
+#define BLK_RING_SIZE __CONST_RING_SIZE(blkif, PAGE_SIZE)
/*
* We have one of these per vbd, whether ide, scsi or 'other'. They
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 128cae4..949ed09 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -35,6 +35,10 @@
static struct usb_device_id ath3k_table[] = {
/* Atheros AR3011 */
{ USB_DEVICE(0x0CF3, 0x3000) },
+
+ /* Atheros AR3011 with sflash firmware*/
+ { USB_DEVICE(0x0CF3, 0x3002) },
+
{ } /* Terminating entry */
};
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index ab3894f..1da773f8 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -99,6 +99,9 @@
/* Broadcom BCM2033 without firmware */
{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
+ /* Atheros 3011 with sflash firmware */
+ { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
@@ -239,7 +242,8 @@
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- BT_ERR("%s urb %p failed to resubmit (%d)",
+ if (err != -EPERM)
+ BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
@@ -323,7 +327,8 @@
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- BT_ERR("%s urb %p failed to resubmit (%d)",
+ if (err != -EPERM)
+ BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
@@ -412,7 +417,8 @@
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- BT_ERR("%s urb %p failed to resubmit (%d)",
+ if (err != -EPERM)
+ BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 9272c38..16a2847 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -812,8 +812,10 @@
static void i830_cleanup(void)
{
- kunmap(intel_private.i8xx_page);
- intel_private.i8xx_flush_page = NULL;
+ if (intel_private.i8xx_flush_page) {
+ kunmap(intel_private.i8xx_flush_page);
+ intel_private.i8xx_flush_page = NULL;
+ }
__free_page(intel_private.i8xx_page);
intel_private.i8xx_page = NULL;
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index e16c3fa..05117f1 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -36,6 +36,7 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector.");
+MODULE_ALIAS_NET_PF_PROTO(PF_NETLINK, NETLINK_CONNECTOR);
static struct cn_dev cdev;
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index a8a84f4..64b21f5 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -1,8 +1,8 @@
ifeq ($(CONFIG_DMADEVICES_DEBUG),y)
- EXTRA_CFLAGS += -DDEBUG
+ ccflags-y += -DDEBUG
endif
ifeq ($(CONFIG_DMADEVICES_VDEBUG),y)
- EXTRA_CFLAGS += -DVERBOSE_DEBUG
+ ccflags-y += -DVERBOSE_DEBUG
endif
obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index a0f3e6a0..ea0ee81 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -722,7 +722,7 @@
desc->lli.daddr = mem;
desc->lli.ctrla = ctrla
| ATC_DST_WIDTH(mem_width)
- | len >> mem_width;
+ | len >> reg_width;
desc->lli.ctrlb = ctrlb;
if (!first) {
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 286c3ac..e5e172d2 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -50,9 +50,11 @@
* EIE - Error interrupt enable
* EOSIE - End of segments interrupt enable (basic mode)
* EOLNIE - End of links interrupt enable
+ * BWC - Bandwidth sharing among channels
*/
- DMA_OUT(chan, &chan->regs->mr, FSL_DMA_MR_EIE
- | FSL_DMA_MR_EOLNIE | FSL_DMA_MR_EOSIE, 32);
+ DMA_OUT(chan, &chan->regs->mr, FSL_DMA_MR_BWC
+ | FSL_DMA_MR_EIE | FSL_DMA_MR_EOLNIE
+ | FSL_DMA_MR_EOSIE, 32);
break;
case FSL_DMA_IP_83XX:
/* Set the channel to below modes:
diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h
index cb4d6ff..ba9f403 100644
--- a/drivers/dma/fsldma.h
+++ b/drivers/dma/fsldma.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Freescale Semiconductor, Inc. All rights reserved.
*
* Author:
* Zhang Wei <wei.zhang@freescale.com>, Jul 2007
@@ -36,6 +36,13 @@
#define FSL_DMA_MR_DAHE 0x00002000
#define FSL_DMA_MR_SAHE 0x00001000
+/*
+ * Bandwidth/pause control determines how many bytes a given
+ * channel is allowed to transfer before the DMA engine pauses
+ * the current channel and switches to the next channel
+ */
+#define FSL_DMA_MR_BWC 0x08000000
+
/* Special MR definition for MPC8349 */
#define FSL_DMA_MR_EOTIE 0x00000080
#define FSL_DMA_MR_PRC_RM 0x00000800
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index f629e49..e53d438 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -379,7 +379,7 @@
return 0;
err_init:
- while (i-- >= 0) {
+ while (--i >= 0) {
struct imxdma_channel *imxdmac = &imxdma->channel[i];
imx_dma_free(imxdmac->imxdma_channel);
}
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 0834323..d0602dd 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -951,7 +951,7 @@
struct sdma_buffer_descriptor *bd = &sdmac->bd[i];
int param;
- bd->buffer_addr = sgl->dma_address;
+ bd->buffer_addr = sg->dma_address;
count = sg->length;
@@ -1385,7 +1385,7 @@
{
return platform_driver_probe(&sdma_driver, sdma_probe);
}
-subsys_initcall(sdma_module_init);
+module_init(sdma_module_init);
MODULE_AUTHOR("Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>");
MODULE_DESCRIPTION("i.MX SDMA driver");
diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c
index 338bc4e..3109bd9 100644
--- a/drivers/dma/intel_mid_dma.c
+++ b/drivers/dma/intel_mid_dma.c
@@ -1075,7 +1075,6 @@
if (NULL == dma->dma_pool) {
pr_err("ERR_MDMA:pci_pool_create failed\n");
err = -ENOMEM;
- kfree(dma);
goto err_dma_pool;
}
@@ -1186,7 +1185,6 @@
free_irq(pdev->irq, dma);
err_irq:
pci_pool_destroy(dma->dma_pool);
- kfree(dma);
err_dma_pool:
pr_err("ERR_MDMA:setup_dma failed: %d\n", err);
return err;
@@ -1413,7 +1411,7 @@
.runtime_idle = dma_runtime_idle,
};
-static struct pci_driver intel_mid_dma_pci = {
+static struct pci_driver intel_mid_dma_pci_driver = {
.name = "Intel MID DMA",
.id_table = intel_mid_dma_ids,
.probe = intel_mid_dma_probe,
@@ -1431,13 +1429,13 @@
{
pr_debug("INFO_MDMA: LNW DMA Driver Version %s\n",
INTEL_MID_DMA_DRIVER_VERSION);
- return pci_register_driver(&intel_mid_dma_pci);
+ return pci_register_driver(&intel_mid_dma_pci_driver);
}
fs_initcall(intel_mid_dma_init);
static void __exit intel_mid_dma_exit(void)
{
- pci_unregister_driver(&intel_mid_dma_pci);
+ pci_unregister_driver(&intel_mid_dma_pci_driver);
}
module_exit(intel_mid_dma_exit);
diff --git a/drivers/dma/ioat/Makefile b/drivers/dma/ioat/Makefile
index 8997d3f..0ff7270 100644
--- a/drivers/dma/ioat/Makefile
+++ b/drivers/dma/ioat/Makefile
@@ -1,2 +1,2 @@
obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
-ioatdma-objs := pci.o dma.o dma_v2.o dma_v3.o dca.o
+ioatdma-y := pci.o dma.o dma_v2.o dma_v3.o dca.o
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index 92b6790..c064c89 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -259,11 +259,6 @@
return;
}
- channel_writel(pd_chan, DEV_ADDR, desc->regs.dev_addr);
- channel_writel(pd_chan, MEM_ADDR, desc->regs.mem_addr);
- channel_writel(pd_chan, SIZE, desc->regs.size);
- channel_writel(pd_chan, NEXT, desc->regs.next);
-
dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> dev_addr: %x\n",
pd_chan->chan.chan_id, desc->regs.dev_addr);
dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> mem_addr: %x\n",
@@ -273,10 +268,16 @@
dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> next: %x\n",
pd_chan->chan.chan_id, desc->regs.next);
- if (list_empty(&desc->tx_list))
+ if (list_empty(&desc->tx_list)) {
+ channel_writel(pd_chan, DEV_ADDR, desc->regs.dev_addr);
+ channel_writel(pd_chan, MEM_ADDR, desc->regs.mem_addr);
+ channel_writel(pd_chan, SIZE, desc->regs.size);
+ channel_writel(pd_chan, NEXT, desc->regs.next);
pdc_set_mode(&pd_chan->chan, DMA_CTL0_ONESHOT);
- else
+ } else {
+ channel_writel(pd_chan, NEXT, desc->txd.phys);
pdc_set_mode(&pd_chan->chan, DMA_CTL0_SG);
+ }
val = dma_readl(pd, CTL2);
val |= 1 << (DMA_CTL2_START_SHIFT_BITS + pd_chan->chan.chan_id);
diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c
index 0d58a4a..cef5845 100644
--- a/drivers/dma/ppc4xx/adma.c
+++ b/drivers/dma/ppc4xx/adma.c
@@ -4449,9 +4449,8 @@
if (!request_mem_region(res.start, resource_size(&res),
dev_driver_string(&ofdev->dev))) {
- dev_err(&ofdev->dev, "failed to request memory region "
- "(0x%016llx-0x%016llx)\n",
- (u64)res.start, (u64)res.end);
+ dev_err(&ofdev->dev, "failed to request memory region %pR\n",
+ &res);
initcode = PPC_ADMA_INIT_MEMREG;
ret = -EBUSY;
goto out;
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 8521401..eca9ba1 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1572,7 +1572,7 @@
debugf1(" HoleOffset=0x%x HoleValid=0x%x IntlvSel=0x%x\n",
hole_off, hole_valid, intlv_sel);
- if (intlv_en ||
+ if (intlv_en &&
(intlv_sel != ((sys_addr >> 12) & intlv_en)))
return -EINVAL;
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index d7ca43a..251440c 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -41,10 +41,10 @@
#define MC_PROC_NAME_MAX_LEN 7
#if PAGE_SHIFT < 20
-#define PAGES_TO_MiB( pages ) ( ( pages ) >> ( 20 - PAGE_SHIFT ) )
-#define MiB_TO_PAGES(mb) ((mb) >> (20 - PAGE_SHIFT))
+#define PAGES_TO_MiB(pages) ((pages) >> (20 - PAGE_SHIFT))
+#define MiB_TO_PAGES(mb) ((mb) << (20 - PAGE_SHIFT))
#else /* PAGE_SHIFT > 20 */
-#define PAGES_TO_MiB( pages ) ( ( pages ) << ( PAGE_SHIFT - 20 ) )
+#define PAGES_TO_MiB(pages) ((pages) << (PAGE_SHIFT - 20))
#define MiB_TO_PAGES(mb) ((mb) >> (PAGE_SHIFT - 20))
#endif
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index ba6586a..795ea69c 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -586,14 +586,16 @@
return NULL;
}
- /* marking MCI offline */
- mci->op_state = OP_OFFLINE;
-
del_mc_from_global_list(mci);
mutex_unlock(&mem_ctls_mutex);
- /* flush workq processes and remove sysfs */
+ /* flush workq processes */
edac_mc_workq_teardown(mci);
+
+ /* marking MCI offline */
+ mci->op_state = OP_OFFLINE;
+
+ /* remove from sysfs */
edac_remove_sysfs_mci_device(mci);
edac_printk(KERN_INFO, EDAC_MC,
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 84eb607..e3c8b60 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -242,6 +242,7 @@
static char ohci_driver_name[] = KBUILD_MODNAME;
+#define PCI_DEVICE_ID_AGERE_FW643 0x5901
#define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380
#define PCI_DEVICE_ID_TI_TSB12LV22 0x8009
@@ -253,18 +254,34 @@
/* In case of multiple matches in ohci_quirks[], only the first one is used. */
static const struct {
- unsigned short vendor, device, flags;
+ unsigned short vendor, device, revision, flags;
} ohci_quirks[] = {
- {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, QUIRK_CYCLE_TIMER |
- QUIRK_RESET_PACKET |
- QUIRK_NO_1394A},
- {PCI_VENDOR_ID_TI, PCI_ANY_ID, QUIRK_RESET_PACKET},
- {PCI_VENDOR_ID_AL, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
- {PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, QUIRK_NO_MSI},
- {PCI_VENDOR_ID_NEC, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
- {PCI_VENDOR_ID_VIA, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
- {PCI_VENDOR_ID_RICOH, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
- {PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_FW, QUIRK_BE_HEADERS},
+ {PCI_VENDOR_ID_AL, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER},
+
+ {PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_FW, PCI_ANY_ID,
+ QUIRK_BE_HEADERS},
+
+ {PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6,
+ QUIRK_NO_MSI},
+
+ {PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, PCI_ANY_ID,
+ QUIRK_NO_MSI},
+
+ {PCI_VENDOR_ID_NEC, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER},
+
+ {PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER},
+
+ {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER | QUIRK_RESET_PACKET | QUIRK_NO_1394A},
+
+ {PCI_VENDOR_ID_TI, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_RESET_PACKET},
+
+ {PCI_VENDOR_ID_VIA, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER | QUIRK_NO_MSI},
};
/* This overrides anything that was found in ohci_quirks[]. */
@@ -2927,9 +2944,11 @@
}
for (i = 0; i < ARRAY_SIZE(ohci_quirks); i++)
- if (ohci_quirks[i].vendor == dev->vendor &&
- (ohci_quirks[i].device == dev->device ||
- ohci_quirks[i].device == (unsigned short)PCI_ANY_ID)) {
+ if ((ohci_quirks[i].vendor == dev->vendor) &&
+ (ohci_quirks[i].device == (unsigned short)PCI_ANY_ID ||
+ ohci_quirks[i].device == dev->device) &&
+ (ohci_quirks[i].revision == (unsigned short)PCI_ANY_ID ||
+ ohci_quirks[i].revision >= dev->revision)) {
ohci->quirks = ohci_quirks[i].flags;
break;
}
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 6985cb1..2baa670 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -156,12 +156,12 @@
{ DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO", 0 },
{ DRM_MODE_CONNECTOR_LVDS, "LVDS", 0 },
{ DRM_MODE_CONNECTOR_Component, "Component", 0 },
- { DRM_MODE_CONNECTOR_9PinDIN, "9-pin DIN", 0 },
- { DRM_MODE_CONNECTOR_DisplayPort, "DisplayPort", 0 },
- { DRM_MODE_CONNECTOR_HDMIA, "HDMI Type A", 0 },
- { DRM_MODE_CONNECTOR_HDMIB, "HDMI Type B", 0 },
+ { DRM_MODE_CONNECTOR_9PinDIN, "DIN", 0 },
+ { DRM_MODE_CONNECTOR_DisplayPort, "DP", 0 },
+ { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A", 0 },
+ { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B", 0 },
{ DRM_MODE_CONNECTOR_TV, "TV", 0 },
- { DRM_MODE_CONNECTOR_eDP, "Embedded DisplayPort", 0 },
+ { DRM_MODE_CONNECTOR_eDP, "eDP", 0 },
};
static struct drm_prop_enum_list drm_encoder_enum_list[] =
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 7ca59359..bede10a 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -241,7 +241,7 @@
}
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- if (!drm_helper_encoder_in_use(encoder)) {
+ if (encoder->crtc && !drm_helper_encoder_in_use(encoder)) {
drm_encoder_disable(encoder);
/* disconnector encoder from any connector */
encoder->crtc = NULL;
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 9d3a503..16d5155 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -585,10 +585,13 @@
struct timeval now;
unsigned long flags;
unsigned int seq;
+ int ret;
e = kzalloc(sizeof *e, GFP_KERNEL);
- if (e == NULL)
- return -ENOMEM;
+ if (e == NULL) {
+ ret = -ENOMEM;
+ goto err_put;
+ }
e->pipe = pipe;
e->base.pid = current->pid;
@@ -603,9 +606,8 @@
spin_lock_irqsave(&dev->event_lock, flags);
if (file_priv->event_space < sizeof e->event) {
- spin_unlock_irqrestore(&dev->event_lock, flags);
- kfree(e);
- return -ENOMEM;
+ ret = -EBUSY;
+ goto err_unlock;
}
file_priv->event_space -= sizeof e->event;
@@ -626,7 +628,7 @@
if ((seq - vblwait->request.sequence) <= (1 << 23)) {
e->event.tv_sec = now.tv_sec;
e->event.tv_usec = now.tv_usec;
- drm_vblank_put(dev, e->pipe);
+ drm_vblank_put(dev, pipe);
list_add_tail(&e->base.link, &e->base.file_priv->event_list);
wake_up_interruptible(&e->base.file_priv->event_wait);
trace_drm_vblank_event_delivered(current->pid, pipe,
@@ -638,6 +640,13 @@
spin_unlock_irqrestore(&dev->event_lock, flags);
return 0;
+
+err_unlock:
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ kfree(e);
+err_put:
+ drm_vblank_put(dev, pipe);
+ return ret;
}
/**
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 7a26f4dd..e680081 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -767,6 +767,9 @@
case I915_PARAM_HAS_BLT:
value = HAS_BLT(dev);
break;
+ case I915_PARAM_HAS_COHERENT_RINGS:
+ value = 1;
+ break;
default:
DRM_DEBUG_DRIVER("Unknown parameter %d\n",
param->param);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 5e54821..275ec6e 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4374,10 +4374,20 @@
* use this buffer rather sooner than later, so issuing the required
* flush earlier is beneficial.
*/
- if (obj->write_domain & I915_GEM_GPU_DOMAINS)
+ if (obj->write_domain & I915_GEM_GPU_DOMAINS) {
i915_gem_flush_ring(dev, file_priv,
obj_priv->ring,
0, obj->write_domain);
+ } else if (obj_priv->ring->outstanding_lazy_request) {
+ /* This ring is not being cleared by active usage,
+ * so emit a request to do so.
+ */
+ u32 seqno = i915_add_request(dev,
+ NULL, NULL,
+ obj_priv->ring);
+ if (seqno == 0)
+ ret = -ENOMEM;
+ }
/* Update the active list for the hardware's current position.
* Otherwise this only updates on a delayed timer or when irqs
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 25ed911..878fc76 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3033,6 +3033,7 @@
#define TRANS_DP_10BPC (1<<9)
#define TRANS_DP_6BPC (2<<9)
#define TRANS_DP_12BPC (3<<9)
+#define TRANS_DP_BPC_MASK (3<<9)
#define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4)
#define TRANS_DP_VSYNC_ACTIVE_LOW 0
#define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3)
diff --git a/drivers/gpu/drm/i915/intel_acpi.c b/drivers/gpu/drm/i915/intel_acpi.c
index 65c88f9..2cb8e0b 100644
--- a/drivers/gpu/drm/i915/intel_acpi.c
+++ b/drivers/gpu/drm/i915/intel_acpi.c
@@ -190,37 +190,6 @@
kfree(output.pointer);
}
-static int intel_dsm_switchto(enum vga_switcheroo_client_id id)
-{
- return 0;
-}
-
-static int intel_dsm_power_state(enum vga_switcheroo_client_id id,
- enum vga_switcheroo_state state)
-{
- return 0;
-}
-
-static int intel_dsm_init(void)
-{
- return 0;
-}
-
-static int intel_dsm_get_client_id(struct pci_dev *pdev)
-{
- if (intel_dsm_priv.dhandle == DEVICE_ACPI_HANDLE(&pdev->dev))
- return VGA_SWITCHEROO_IGD;
- else
- return VGA_SWITCHEROO_DIS;
-}
-
-static struct vga_switcheroo_handler intel_dsm_handler = {
- .switchto = intel_dsm_switchto,
- .power_state = intel_dsm_power_state,
- .init = intel_dsm_init,
- .get_client_id = intel_dsm_get_client_id,
-};
-
static bool intel_dsm_pci_probe(struct pci_dev *pdev)
{
acpi_handle dhandle, intel_handle;
@@ -276,11 +245,8 @@
{
if (!intel_dsm_detect())
return;
-
- vga_switcheroo_register_handler(&intel_dsm_handler);
}
void intel_unregister_dsm_handler(void)
{
- vga_switcheroo_unregister_handler();
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 255b52e..d9b7092 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2120,9 +2120,11 @@
reg = TRANS_DP_CTL(pipe);
temp = I915_READ(reg);
temp &= ~(TRANS_DP_PORT_SEL_MASK |
- TRANS_DP_SYNC_MASK);
+ TRANS_DP_SYNC_MASK |
+ TRANS_DP_BPC_MASK);
temp |= (TRANS_DP_OUTPUT_ENABLE |
TRANS_DP_ENH_FRAMING);
+ temp |= TRANS_DP_8BPC;
if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
@@ -2712,27 +2714,19 @@
}
}
-#define DATA_N 0x800000
-#define LINK_N 0x80000
-
static void
ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
int link_clock, struct fdi_m_n *m_n)
{
- u64 temp;
-
m_n->tu = 64; /* default size */
- temp = (u64) DATA_N * pixel_clock;
- temp = div_u64(temp, link_clock);
- m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes);
- m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */
- m_n->gmch_n = DATA_N;
+ /* BUG_ON(pixel_clock > INT_MAX / 36); */
+ m_n->gmch_m = bits_per_pixel * pixel_clock;
+ m_n->gmch_n = link_clock * nlanes * 8;
fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
- temp = (u64) LINK_N * pixel_clock;
- m_n->link_m = div_u64(temp, link_clock);
- m_n->link_n = LINK_N;
+ m_n->link_m = pixel_clock;
+ m_n->link_n = link_clock;
fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
}
@@ -3716,6 +3710,7 @@
/* FDI link */
if (HAS_PCH_SPLIT(dev)) {
+ int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
int lane = 0, link_bw, bpp;
/* CPU eDP doesn't require FDI link, so just set DP M/N
according to current link config */
@@ -3799,6 +3794,8 @@
intel_crtc->fdi_lanes = lane;
+ if (pixel_multiplier > 1)
+ link_bw *= pixel_multiplier;
ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
}
@@ -5236,6 +5233,55 @@
.page_flip = intel_crtc_page_flip,
};
+static void intel_sanitize_modesetting(struct drm_device *dev,
+ int pipe, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 reg, val;
+
+ if (HAS_PCH_SPLIT(dev))
+ return;
+
+ /* Who knows what state these registers were left in by the BIOS or
+ * grub?
+ *
+ * If we leave the registers in a conflicting state (e.g. with the
+ * display plane reading from the other pipe than the one we intend
+ * to use) then when we attempt to teardown the active mode, we will
+ * not disable the pipes and planes in the correct order -- leaving
+ * a plane reading from a disabled pipe and possibly leading to
+ * undefined behaviour.
+ */
+
+ reg = DSPCNTR(plane);
+ val = I915_READ(reg);
+
+ if ((val & DISPLAY_PLANE_ENABLE) == 0)
+ return;
+ if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe)
+ return;
+
+ /* This display plane is active and attached to the other CPU pipe. */
+ pipe = !pipe;
+
+ /* Disable the plane and wait for it to stop reading from the pipe. */
+ I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
+ intel_flush_display_plane(dev, plane);
+
+ if (IS_GEN2(dev))
+ intel_wait_for_vblank(dev, pipe);
+
+ if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+ return;
+
+ /* Switch off the pipe. */
+ reg = PIPECONF(pipe);
+ val = I915_READ(reg);
+ if (val & PIPECONF_ENABLE) {
+ I915_WRITE(reg, val & ~PIPECONF_ENABLE);
+ intel_wait_for_pipe_off(dev, pipe);
+ }
+}
static void intel_crtc_init(struct drm_device *dev, int pipe)
{
@@ -5287,6 +5333,8 @@
setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
(unsigned long)intel_crtc);
+
+ intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
}
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 300f64b..df648cb 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1376,6 +1376,9 @@
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t DP = intel_dp->DP;
+ if ((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)
+ return;
+
DRM_DEBUG_KMS("\n");
if (is_edp(intel_dp)) {
@@ -1398,6 +1401,28 @@
if (is_edp(intel_dp))
DP |= DP_LINK_TRAIN_OFF;
+
+ if (!HAS_PCH_CPT(dev) &&
+ I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
+ /* Hardware workaround: leaving our transcoder select
+ * set to transcoder B while it's off will prevent the
+ * corresponding HDMI output on transcoder A.
+ *
+ * Combine this with another hardware workaround:
+ * transcoder select bit can only be cleared while the
+ * port is enabled.
+ */
+ DP &= ~DP_PIPEB_SELECT;
+ I915_WRITE(intel_dp->output_reg, DP);
+
+ /* Changes to enable or select take place the vblank
+ * after being written.
+ */
+ intel_wait_for_vblank(intel_dp->base.base.dev,
+ intel_crtc->pipe);
+ }
+
I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
POSTING_READ(intel_dp->output_reg);
}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f79327f..25bcedf 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -68,7 +68,7 @@
/**
* Sets the power state for the panel.
*/
-static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on)
+static void intel_lvds_enable(struct intel_lvds *intel_lvds)
{
struct drm_device *dev = intel_lvds->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -82,26 +82,61 @@
lvds_reg = LVDS;
}
- if (on) {
- I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
- I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
- intel_panel_set_backlight(dev, dev_priv->backlight_level);
- } else {
- dev_priv->backlight_level = intel_panel_get_backlight(dev);
+ I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
- intel_panel_set_backlight(dev, 0);
- I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
-
- if (intel_lvds->pfit_control) {
- if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
- DRM_ERROR("timed out waiting for panel to power off\n");
- I915_WRITE(PFIT_CONTROL, 0);
- intel_lvds->pfit_control = 0;
+ if (intel_lvds->pfit_dirty) {
+ /*
+ * Enable automatic panel scaling so that non-native modes
+ * fill the screen. The panel fitter should only be
+ * adjusted whilst the pipe is disabled, according to
+ * register description and PRM.
+ */
+ DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
+ intel_lvds->pfit_control,
+ intel_lvds->pfit_pgm_ratios);
+ if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) {
+ DRM_ERROR("timed out waiting for panel to power off\n");
+ } else {
+ I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
+ I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
intel_lvds->pfit_dirty = false;
}
-
- I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
}
+
+ I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
+ POSTING_READ(lvds_reg);
+
+ intel_panel_set_backlight(dev, dev_priv->backlight_level);
+}
+
+static void intel_lvds_disable(struct intel_lvds *intel_lvds)
+{
+ struct drm_device *dev = intel_lvds->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 ctl_reg, lvds_reg;
+
+ if (HAS_PCH_SPLIT(dev)) {
+ ctl_reg = PCH_PP_CONTROL;
+ lvds_reg = PCH_LVDS;
+ } else {
+ ctl_reg = PP_CONTROL;
+ lvds_reg = LVDS;
+ }
+
+ dev_priv->backlight_level = intel_panel_get_backlight(dev);
+ intel_panel_set_backlight(dev, 0);
+
+ I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+
+ if (intel_lvds->pfit_control) {
+ if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
+ DRM_ERROR("timed out waiting for panel to power off\n");
+
+ I915_WRITE(PFIT_CONTROL, 0);
+ intel_lvds->pfit_dirty = true;
+ }
+
+ I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
POSTING_READ(lvds_reg);
}
@@ -110,9 +145,9 @@
struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
if (mode == DRM_MODE_DPMS_ON)
- intel_lvds_set_power(intel_lvds, true);
+ intel_lvds_enable(intel_lvds);
else
- intel_lvds_set_power(intel_lvds, false);
+ intel_lvds_disable(intel_lvds);
/* XXX: We never power down the LVDS pairs. */
}
@@ -411,43 +446,18 @@
/* Always do a full power on as we do not know what state
* we were left in.
*/
- intel_lvds_set_power(intel_lvds, true);
+ intel_lvds_enable(intel_lvds);
}
static void intel_lvds_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct drm_device *dev = encoder->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
-
/*
* The LVDS pin pair will already have been turned on in the
* intel_crtc_mode_set since it has a large impact on the DPLL
* settings.
*/
-
- if (HAS_PCH_SPLIT(dev))
- return;
-
- if (!intel_lvds->pfit_dirty)
- return;
-
- /*
- * Enable automatic panel scaling so that non-native modes fill the
- * screen. Should be enabled before the pipe is enabled, according to
- * register description and PRM.
- */
- DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
- intel_lvds->pfit_control,
- intel_lvds->pfit_pgm_ratios);
- if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
- DRM_ERROR("timed out waiting for panel to power off\n");
-
- I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
- I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
- intel_lvds->pfit_dirty = false;
}
/**
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index b83306f..89a65be 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -156,23 +156,25 @@
/* G45 ring initialization fails to reset head to zero */
if (head != 0) {
- DRM_ERROR("%s head not reset to zero "
- "ctl %08x head %08x tail %08x start %08x\n",
- ring->name,
- I915_READ_CTL(ring),
- I915_READ_HEAD(ring),
- I915_READ_TAIL(ring),
- I915_READ_START(ring));
+ DRM_DEBUG_KMS("%s head not reset to zero "
+ "ctl %08x head %08x tail %08x start %08x\n",
+ ring->name,
+ I915_READ_CTL(ring),
+ I915_READ_HEAD(ring),
+ I915_READ_TAIL(ring),
+ I915_READ_START(ring));
I915_WRITE_HEAD(ring, 0);
- DRM_ERROR("%s head forced to zero "
- "ctl %08x head %08x tail %08x start %08x\n",
- ring->name,
- I915_READ_CTL(ring),
- I915_READ_HEAD(ring),
- I915_READ_TAIL(ring),
- I915_READ_START(ring));
+ if (I915_READ_HEAD(ring) & HEAD_ADDR) {
+ DRM_ERROR("failed to set %s head to zero "
+ "ctl %08x head %08x tail %08x start %08x\n",
+ ring->name,
+ I915_READ_CTL(ring),
+ I915_READ_HEAD(ring),
+ I915_READ_TAIL(ring),
+ I915_READ_START(ring));
+ }
}
I915_WRITE_CTL(ring,
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index a355259..4d7a2e1 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -878,12 +878,15 @@
u32 tmp;
/* flush hdp cache so updates hit vram */
- if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740)) {
+ if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) &&
+ !(rdev->flags & RADEON_IS_AGP)) {
void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
u32 tmp;
/* r7xx hw bug. write to HDP_DEBUG1 followed by fb read
* rather than write to HDP_REG_COHERENCY_FLUSH_CNTL
+ * This seems to cause problems on some AGP cards. Just use the old
+ * method for them.
*/
WREG32(HDP_DEBUG1, 0);
tmp = readl((void __iomem *)ptr);
@@ -1195,8 +1198,10 @@
mc->vram_end, mc->real_vram_size >> 20);
} else {
u64 base = 0;
- if (rdev->flags & RADEON_IS_IGP)
- base = (RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
+ if (rdev->flags & RADEON_IS_IGP) {
+ base = RREG32(MC_VM_FB_LOCATION) & 0xFFFF;
+ base <<= 24;
+ }
radeon_vram_location(rdev, &rdev->mc, base);
rdev->mc.gtt_base_align = 0;
radeon_gtt_location(rdev, mc);
@@ -3483,10 +3488,12 @@
void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo)
{
/* r7xx hw bug. write to HDP_DEBUG1 followed by fb read
- * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL
+ * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL.
+ * This seems to cause problems on some AGP cards. Just use the old
+ * method for them.
*/
if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) &&
- rdev->vram_scratch.ptr) {
+ rdev->vram_scratch.ptr && !(rdev->flags & RADEON_IS_AGP)) {
void __iomem *ptr = (void *)rdev->vram_scratch.ptr;
u32 tmp;
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index d8ac184..e12e793 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -286,7 +286,7 @@
mc->mc_vram_size = mc->aper_size;
}
mc->vram_end = mc->vram_start + mc->mc_vram_size - 1;
- dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n",
+ dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n",
mc->mc_vram_size >> 20, mc->vram_start,
mc->vram_end, mc->real_vram_size >> 20);
}
@@ -323,7 +323,7 @@
mc->gtt_start = (mc->vram_end + 1 + mc->gtt_base_align) & ~mc->gtt_base_align;
}
mc->gtt_end = mc->gtt_start + mc->gtt_size - 1;
- dev_info(rdev->dev, "GTT: %lluM 0x%08llX - 0x%08llX\n",
+ dev_info(rdev->dev, "GTT: %lluM 0x%016llX - 0x%016llX\n",
mc->gtt_size >> 20, mc->gtt_start, mc->gtt_end);
}
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 1d06774..a598d00 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -69,7 +69,7 @@
u32 c = 0;
rbo->placement.fpfn = 0;
- rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT;
+ rbo->placement.lpfn = 0;
rbo->placement.placement = rbo->placements;
rbo->placement.busy_placement = rbo->placements;
if (domain & RADEON_GEM_DOMAIN_VRAM)
@@ -91,7 +91,8 @@
{
struct radeon_bo *bo;
enum ttm_bo_type type;
- int page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT;
+ unsigned long page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT;
+ unsigned long max_size = 0;
int r;
if (unlikely(rdev->mman.bdev.dev_mapping == NULL)) {
@@ -104,6 +105,14 @@
}
*bo_ptr = NULL;
+ /* maximun bo size is the minimun btw visible vram and gtt size */
+ max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size);
+ if ((page_align << PAGE_SHIFT) >= max_size) {
+ printk(KERN_WARNING "%s:%d alloc size %ldM bigger than %ldMb limit\n",
+ __func__, __LINE__, page_align >> (20 - PAGE_SHIFT), max_size >> 20);
+ return -ENOMEM;
+ }
+
retry:
bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
if (bo == NULL)
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 4bf969c..be0fdd5 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -916,27 +916,27 @@
int nr = sensor_attr->index;
struct i2c_client *client = to_i2c_client(dev);
struct adm1026_data *data = i2c_get_clientdata(client);
- int val, orig_div, new_div, shift;
+ int val, orig_div, new_div;
val = simple_strtol(buf, NULL, 10);
new_div = DIV_TO_REG(val);
- if (new_div == 0) {
- return -EINVAL;
- }
+
mutex_lock(&data->update_lock);
orig_div = data->fan_div[nr];
data->fan_div[nr] = DIV_FROM_REG(new_div);
if (nr < 4) { /* 0 <= nr < 4 */
- shift = 2 * nr;
adm1026_write_value(client, ADM1026_REG_FAN_DIV_0_3,
- ((DIV_TO_REG(orig_div) & (~(0x03 << shift))) |
- (new_div << shift)));
+ (DIV_TO_REG(data->fan_div[0]) << 0) |
+ (DIV_TO_REG(data->fan_div[1]) << 2) |
+ (DIV_TO_REG(data->fan_div[2]) << 4) |
+ (DIV_TO_REG(data->fan_div[3]) << 6));
} else { /* 3 < nr < 8 */
- shift = 2 * (nr - 4);
adm1026_write_value(client, ADM1026_REG_FAN_DIV_4_7,
- ((DIV_TO_REG(orig_div) & (~(0x03 << (2 * shift)))) |
- (new_div << shift)));
+ (DIV_TO_REG(data->fan_div[4]) << 0) |
+ (DIV_TO_REG(data->fan_div[5]) << 2) |
+ (DIV_TO_REG(data->fan_div[6]) << 4) |
+ (DIV_TO_REG(data->fan_div[7]) << 6));
}
if (data->fan_div[nr] != orig_div) {
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 14a5d98..a428a92 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -187,6 +187,7 @@
#define IT87_REG_FAN_MAIN_CTRL 0x13
#define IT87_REG_FAN_CTL 0x14
#define IT87_REG_PWM(nr) (0x15 + (nr))
+#define IT87_REG_PWM_DUTY(nr) (0x63 + (nr) * 8)
#define IT87_REG_VIN(nr) (0x20 + (nr))
#define IT87_REG_TEMP(nr) (0x29 + (nr))
@@ -251,12 +252,16 @@
u8 fan_main_ctrl; /* Register value */
u8 fan_ctl; /* Register value */
- /* The following 3 arrays correspond to the same registers. The
- * meaning of bits 6-0 depends on the value of bit 7, and we want
- * to preserve settings on mode changes, so we have to track all
- * values separately. */
+ /* The following 3 arrays correspond to the same registers up to
+ * the IT8720F. The meaning of bits 6-0 depends on the value of bit
+ * 7, and we want to preserve settings on mode changes, so we have
+ * to track all values separately.
+ * Starting with the IT8721F, the manual PWM duty cycles are stored
+ * in separate registers (8-bit values), so the separate tracking
+ * is no longer needed, but it is still done to keep the driver
+ * simple. */
u8 pwm_ctrl[3]; /* Register value */
- u8 pwm_duty[3]; /* Manual PWM value set by user (bit 6-0) */
+ u8 pwm_duty[3]; /* Manual PWM value set by user */
u8 pwm_temp_map[3]; /* PWM to temp. chan. mapping (bits 1-0) */
/* Automatic fan speed control registers */
@@ -832,7 +837,9 @@
data->fan_main_ctrl);
} else {
if (val == 1) /* Manual mode */
- data->pwm_ctrl[nr] = data->pwm_duty[nr];
+ data->pwm_ctrl[nr] = data->type == it8721 ?
+ data->pwm_temp_map[nr] :
+ data->pwm_duty[nr];
else /* Automatic mode */
data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
@@ -858,12 +865,25 @@
return -EINVAL;
mutex_lock(&data->update_lock);
- data->pwm_duty[nr] = pwm_to_reg(data, val);
- /* If we are in manual mode, write the duty cycle immediately;
- * otherwise, just store it for later use. */
- if (!(data->pwm_ctrl[nr] & 0x80)) {
- data->pwm_ctrl[nr] = data->pwm_duty[nr];
- it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
+ if (data->type == it8721) {
+ /* If we are in automatic mode, the PWM duty cycle register
+ * is read-only so we can't write the value */
+ if (data->pwm_ctrl[nr] & 0x80) {
+ mutex_unlock(&data->update_lock);
+ return -EBUSY;
+ }
+ data->pwm_duty[nr] = pwm_to_reg(data, val);
+ it87_write_value(data, IT87_REG_PWM_DUTY(nr),
+ data->pwm_duty[nr]);
+ } else {
+ data->pwm_duty[nr] = pwm_to_reg(data, val);
+ /* If we are in manual mode, write the duty cycle immediately;
+ * otherwise, just store it for later use. */
+ if (!(data->pwm_ctrl[nr] & 0x80)) {
+ data->pwm_ctrl[nr] = data->pwm_duty[nr];
+ it87_write_value(data, IT87_REG_PWM(nr),
+ data->pwm_ctrl[nr]);
+ }
}
mutex_unlock(&data->update_lock);
return count;
@@ -1958,7 +1978,10 @@
* channels to use when later setting to automatic mode later.
* Use a 1:1 mapping by default (we are clueless.)
* In both cases, the value can (and should) be changed by the user
- * prior to switching to a different mode. */
+ * prior to switching to a different mode.
+ * Note that this is no longer needed for the IT8721F and later, as
+ * these have separate registers for the temperature mapping and the
+ * manual duty cycle. */
for (i = 0; i < 3; i++) {
data->pwm_temp_map[i] = i;
data->pwm_duty[i] = 0x7f; /* Full speed */
@@ -2034,10 +2057,16 @@
static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
{
data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr));
- if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
+ if (data->type == it8721) {
data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
- else /* Manual mode */
- data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+ data->pwm_duty[nr] = it87_read_value(data,
+ IT87_REG_PWM_DUTY(nr));
+ } else {
+ if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
+ data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
+ else /* Manual mode */
+ data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+ }
if (has_old_autopwm(data)) {
int i;
diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c
index 00d975e..c7e6d8e 100644
--- a/drivers/hwmon/ltc4215.c
+++ b/drivers/hwmon/ltc4215.c
@@ -205,7 +205,6 @@
/* Power (virtual) */
LTC4215_POWER(power1_input);
-LTC4215_ALARM(power1_alarm, (1 << 3), LTC4215_STATUS);
/* Input Voltage */
LTC4215_VOLTAGE(in1_input, LTC4215_ADIN);
@@ -214,6 +213,7 @@
/* Output Voltage */
LTC4215_VOLTAGE(in2_input, LTC4215_SOURCE);
+LTC4215_ALARM(in2_min_alarm, (1 << 3), LTC4215_STATUS);
/* Finally, construct an array of pointers to members of the above objects,
* as required for sysfs_create_group()
@@ -223,13 +223,13 @@
&sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
&sensor_dev_attr_power1_input.dev_attr.attr,
- &sensor_dev_attr_power1_alarm.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_max_alarm.dev_attr.attr,
&sensor_dev_attr_in1_min_alarm.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_min_alarm.dev_attr.attr,
NULL,
};
diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c
index 80f70d3..c714927 100644
--- a/drivers/i2c/busses/i2c-intel-mid.c
+++ b/drivers/i2c/busses/i2c-intel-mid.c
@@ -999,7 +999,7 @@
/* Initialize struct members */
snprintf(mrst->adap.name, sizeof(mrst->adap.name),
- "MRST/Medfield I2C at %lx", start);
+ "Intel MID I2C at %lx", start);
mrst->adap.owner = THIS_MODULE;
mrst->adap.algo = &intel_mid_i2c_algorithm;
mrst->adap.dev.parent = &dev->dev;
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 41665d2..c131d58 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -273,8 +273,6 @@
pr_debug(PREFIX "MWAIT substates: 0x%x\n", mwait_substates);
- if (boot_cpu_has(X86_FEATURE_ARAT)) /* Always Reliable APIC Timer */
- lapic_timer_reliable_states = 0xFFFFFFFF;
if (boot_cpu_data.x86 != 6) /* family 6 */
return -ENODEV;
@@ -286,8 +284,6 @@
case 0x1F: /* Core i7 and i5 Processor - Nehalem */
case 0x2E: /* Nehalem-EX Xeon */
case 0x2F: /* Westmere-EX Xeon */
- lapic_timer_reliable_states = (1 << 1); /* C1 */
-
case 0x25: /* Westmere */
case 0x2C: /* Westmere */
cpuidle_state_table = nehalem_cstates;
@@ -295,7 +291,6 @@
case 0x1C: /* 28 - Atom Processor */
case 0x26: /* 38 - Lincroft Atom Processor */
- lapic_timer_reliable_states = (1 << 1); /* C1 */
cpuidle_state_table = atom_cstates;
break;
@@ -303,10 +298,6 @@
case 0x2D: /* SNB Xeon */
cpuidle_state_table = snb_cstates;
break;
-#ifdef FUTURE_USE
- case 0x17: /* 23 - Core 2 Duo */
- lapic_timer_reliable_states = (1 << 2) | (1 << 1); /* C2, C1 */
-#endif
default:
pr_debug(PREFIX "does not run on family %d model %d\n",
@@ -314,6 +305,9 @@
return -ENODEV;
}
+ if (boot_cpu_has(X86_FEATURE_ARAT)) /* Always Reliable APIC Timer */
+ lapic_timer_reliable_states = 0xFFFFFFFF;
+
pr_debug(PREFIX "v" INTEL_IDLE_VERSION
" model 0x%X\n", boot_cpu_data.x86_model);
diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index b342248..c426992 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -893,68 +893,81 @@
return ret ? ret : in_len;
}
+static int copy_wc_to_user(void __user *dest, struct ib_wc *wc)
+{
+ struct ib_uverbs_wc tmp;
+
+ tmp.wr_id = wc->wr_id;
+ tmp.status = wc->status;
+ tmp.opcode = wc->opcode;
+ tmp.vendor_err = wc->vendor_err;
+ tmp.byte_len = wc->byte_len;
+ tmp.ex.imm_data = (__u32 __force) wc->ex.imm_data;
+ tmp.qp_num = wc->qp->qp_num;
+ tmp.src_qp = wc->src_qp;
+ tmp.wc_flags = wc->wc_flags;
+ tmp.pkey_index = wc->pkey_index;
+ tmp.slid = wc->slid;
+ tmp.sl = wc->sl;
+ tmp.dlid_path_bits = wc->dlid_path_bits;
+ tmp.port_num = wc->port_num;
+ tmp.reserved = 0;
+
+ if (copy_to_user(dest, &tmp, sizeof tmp))
+ return -EFAULT;
+
+ return 0;
+}
+
ssize_t ib_uverbs_poll_cq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_poll_cq cmd;
- struct ib_uverbs_poll_cq_resp *resp;
+ struct ib_uverbs_poll_cq_resp resp;
+ u8 __user *header_ptr;
+ u8 __user *data_ptr;
struct ib_cq *cq;
- struct ib_wc *wc;
- int ret = 0;
- int i;
- int rsize;
+ struct ib_wc wc;
+ int ret;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
- wc = kmalloc(cmd.ne * sizeof *wc, GFP_KERNEL);
- if (!wc)
- return -ENOMEM;
-
- rsize = sizeof *resp + cmd.ne * sizeof(struct ib_uverbs_wc);
- resp = kmalloc(rsize, GFP_KERNEL);
- if (!resp) {
- ret = -ENOMEM;
- goto out_wc;
- }
-
cq = idr_read_cq(cmd.cq_handle, file->ucontext, 0);
- if (!cq) {
- ret = -EINVAL;
- goto out;
+ if (!cq)
+ return -EINVAL;
+
+ /* we copy a struct ib_uverbs_poll_cq_resp to user space */
+ header_ptr = (void __user *)(unsigned long) cmd.response;
+ data_ptr = header_ptr + sizeof resp;
+
+ memset(&resp, 0, sizeof resp);
+ while (resp.count < cmd.ne) {
+ ret = ib_poll_cq(cq, 1, &wc);
+ if (ret < 0)
+ goto out_put;
+ if (!ret)
+ break;
+
+ ret = copy_wc_to_user(data_ptr, &wc);
+ if (ret)
+ goto out_put;
+
+ data_ptr += sizeof(struct ib_uverbs_wc);
+ ++resp.count;
}
- resp->count = ib_poll_cq(cq, cmd.ne, wc);
-
- put_cq_read(cq);
-
- for (i = 0; i < resp->count; i++) {
- resp->wc[i].wr_id = wc[i].wr_id;
- resp->wc[i].status = wc[i].status;
- resp->wc[i].opcode = wc[i].opcode;
- resp->wc[i].vendor_err = wc[i].vendor_err;
- resp->wc[i].byte_len = wc[i].byte_len;
- resp->wc[i].ex.imm_data = (__u32 __force) wc[i].ex.imm_data;
- resp->wc[i].qp_num = wc[i].qp->qp_num;
- resp->wc[i].src_qp = wc[i].src_qp;
- resp->wc[i].wc_flags = wc[i].wc_flags;
- resp->wc[i].pkey_index = wc[i].pkey_index;
- resp->wc[i].slid = wc[i].slid;
- resp->wc[i].sl = wc[i].sl;
- resp->wc[i].dlid_path_bits = wc[i].dlid_path_bits;
- resp->wc[i].port_num = wc[i].port_num;
- }
-
- if (copy_to_user((void __user *) (unsigned long) cmd.response, resp, rsize))
+ if (copy_to_user(header_ptr, &resp, sizeof resp)) {
ret = -EFAULT;
+ goto out_put;
+ }
-out:
- kfree(resp);
+ ret = in_len;
-out_wc:
- kfree(wc);
- return ret ? ret : in_len;
+out_put:
+ put_cq_read(cq);
+ return ret;
}
ssize_t ib_uverbs_req_notify_cq(struct ib_uverbs_file *file,
diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c
index d53b9e9..27b6a3c 100644
--- a/drivers/input/joystick/turbografx.c
+++ b/drivers/input/joystick/turbografx.c
@@ -245,6 +245,7 @@
goto err_free_tgfx;
}
+ parport_put_port(pp);
return tgfx;
err_free_dev:
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index b8c51b9..3a87f3b 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -179,6 +179,22 @@
To compile this driver as a module, choose M here: the
module will be called gpio_keys.
+config KEYBOARD_GPIO_POLLED
+ tristate "Polled GPIO buttons"
+ depends on GENERIC_GPIO
+ select INPUT_POLLDEV
+ help
+ This driver implements support for buttons connected
+ to GPIO pins that are not capable of generating interrupts.
+
+ Say Y here if your device has buttons connected
+ directly to such GPIO pins. Your board-specific
+ setup logic must also provide a platform device,
+ with configuration data saying which GPIOs are used.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gpio_keys_polled.
+
config KEYBOARD_TCA6416
tristate "TCA6416 Keypad Support"
depends on I2C
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index a34452e..622de73 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -14,6 +14,7 @@
obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
+obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o
obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
new file mode 100644
index 0000000..4c17aff
--- /dev/null
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -0,0 +1,261 @@
+/*
+ * Driver for buttons on GPIO lines not capable of generating interrupts
+ *
+ * Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
+ *
+ * This file was based on: /drivers/input/misc/cobalt_btns.c
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * also was based on: /drivers/input/keyboard/gpio_keys.c
+ * Copyright 2005 Phil Blundell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+
+#define DRV_NAME "gpio-keys-polled"
+
+struct gpio_keys_button_data {
+ int last_state;
+ int count;
+ int threshold;
+ int can_sleep;
+};
+
+struct gpio_keys_polled_dev {
+ struct input_polled_dev *poll_dev;
+ struct device *dev;
+ struct gpio_keys_platform_data *pdata;
+ struct gpio_keys_button_data data[0];
+};
+
+static void gpio_keys_polled_check_state(struct input_dev *input,
+ struct gpio_keys_button *button,
+ struct gpio_keys_button_data *bdata)
+{
+ int state;
+
+ if (bdata->can_sleep)
+ state = !!gpio_get_value_cansleep(button->gpio);
+ else
+ state = !!gpio_get_value(button->gpio);
+
+ if (state != bdata->last_state) {
+ unsigned int type = button->type ?: EV_KEY;
+
+ input_event(input, type, button->code,
+ !!(state ^ button->active_low));
+ input_sync(input);
+ bdata->count = 0;
+ bdata->last_state = state;
+ }
+}
+
+static void gpio_keys_polled_poll(struct input_polled_dev *dev)
+{
+ struct gpio_keys_polled_dev *bdev = dev->private;
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+ struct input_dev *input = dev->input;
+ int i;
+
+ for (i = 0; i < bdev->pdata->nbuttons; i++) {
+ struct gpio_keys_button_data *bdata = &bdev->data[i];
+
+ if (bdata->count < bdata->threshold)
+ bdata->count++;
+ else
+ gpio_keys_polled_check_state(input, &pdata->buttons[i],
+ bdata);
+ }
+}
+
+static void gpio_keys_polled_open(struct input_polled_dev *dev)
+{
+ struct gpio_keys_polled_dev *bdev = dev->private;
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+ if (pdata->enable)
+ pdata->enable(bdev->dev);
+}
+
+static void gpio_keys_polled_close(struct input_polled_dev *dev)
+{
+ struct gpio_keys_polled_dev *bdev = dev->private;
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+ if (pdata->disable)
+ pdata->disable(bdev->dev);
+}
+
+static int __devinit gpio_keys_polled_probe(struct platform_device *pdev)
+{
+ struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct gpio_keys_polled_dev *bdev;
+ struct input_polled_dev *poll_dev;
+ struct input_dev *input;
+ int error;
+ int i;
+
+ if (!pdata || !pdata->poll_interval)
+ return -EINVAL;
+
+ bdev = kzalloc(sizeof(struct gpio_keys_polled_dev) +
+ pdata->nbuttons * sizeof(struct gpio_keys_button_data),
+ GFP_KERNEL);
+ if (!bdev) {
+ dev_err(dev, "no memory for private data\n");
+ return -ENOMEM;
+ }
+
+ poll_dev = input_allocate_polled_device();
+ if (!poll_dev) {
+ dev_err(dev, "no memory for polled device\n");
+ error = -ENOMEM;
+ goto err_free_bdev;
+ }
+
+ poll_dev->private = bdev;
+ poll_dev->poll = gpio_keys_polled_poll;
+ poll_dev->poll_interval = pdata->poll_interval;
+ poll_dev->open = gpio_keys_polled_open;
+ poll_dev->close = gpio_keys_polled_close;
+
+ input = poll_dev->input;
+
+ input->evbit[0] = BIT(EV_KEY);
+ input->name = pdev->name;
+ input->phys = DRV_NAME"/input0";
+ input->dev.parent = &pdev->dev;
+
+ input->id.bustype = BUS_HOST;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+
+ for (i = 0; i < pdata->nbuttons; i++) {
+ struct gpio_keys_button *button = &pdata->buttons[i];
+ struct gpio_keys_button_data *bdata = &bdev->data[i];
+ unsigned int gpio = button->gpio;
+ unsigned int type = button->type ?: EV_KEY;
+
+ if (button->wakeup) {
+ dev_err(dev, DRV_NAME " does not support wakeup\n");
+ error = -EINVAL;
+ goto err_free_gpio;
+ }
+
+ error = gpio_request(gpio,
+ button->desc ? button->desc : DRV_NAME);
+ if (error) {
+ dev_err(dev, "unable to claim gpio %u, err=%d\n",
+ gpio, error);
+ goto err_free_gpio;
+ }
+
+ error = gpio_direction_input(gpio);
+ if (error) {
+ dev_err(dev,
+ "unable to set direction on gpio %u, err=%d\n",
+ gpio, error);
+ goto err_free_gpio;
+ }
+
+ bdata->can_sleep = gpio_cansleep(gpio);
+ bdata->last_state = -1;
+ bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
+ pdata->poll_interval);
+
+ input_set_capability(input, type, button->code);
+ }
+
+ bdev->poll_dev = poll_dev;
+ bdev->dev = dev;
+ bdev->pdata = pdata;
+ platform_set_drvdata(pdev, bdev);
+
+ error = input_register_polled_device(poll_dev);
+ if (error) {
+ dev_err(dev, "unable to register polled device, err=%d\n",
+ error);
+ goto err_free_gpio;
+ }
+
+ /* report initial state of the buttons */
+ for (i = 0; i < pdata->nbuttons; i++)
+ gpio_keys_polled_check_state(input, &pdata->buttons[i],
+ &bdev->data[i]);
+
+ return 0;
+
+err_free_gpio:
+ while (--i >= 0)
+ gpio_free(pdata->buttons[i].gpio);
+
+ input_free_polled_device(poll_dev);
+
+err_free_bdev:
+ kfree(bdev);
+
+ platform_set_drvdata(pdev, NULL);
+ return error;
+}
+
+static int __devexit gpio_keys_polled_remove(struct platform_device *pdev)
+{
+ struct gpio_keys_polled_dev *bdev = platform_get_drvdata(pdev);
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+ int i;
+
+ input_unregister_polled_device(bdev->poll_dev);
+
+ for (i = 0; i < pdata->nbuttons; i++)
+ gpio_free(pdata->buttons[i].gpio);
+
+ input_free_polled_device(bdev->poll_dev);
+
+ kfree(bdev);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver gpio_keys_polled_driver = {
+ .probe = gpio_keys_polled_probe,
+ .remove = __devexit_p(gpio_keys_polled_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init gpio_keys_polled_init(void)
+{
+ return platform_driver_register(&gpio_keys_polled_driver);
+}
+
+static void __exit gpio_keys_polled_exit(void)
+{
+ platform_driver_unregister(&gpio_keys_polled_driver);
+}
+
+module_init(gpio_keys_polled_init);
+module_exit(gpio_keys_polled_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_DESCRIPTION("Polled GPIO Buttons driver");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 613a365..0aefaa8 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -51,7 +51,8 @@
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
-#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100100)
+#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
+#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */
#define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000)
/* synaptics modes query bits */
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index b3252ef..4852b44 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1436,6 +1436,12 @@
{ "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xD3 =
{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xD8 =
+ { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDA =
+ { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDB =
+ { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
#define USB_DEVICE_WACOM(prod) \
USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \
@@ -1504,6 +1510,9 @@
{ USB_DEVICE_WACOM(0xD1) },
{ USB_DEVICE_WACOM(0xD2) },
{ USB_DEVICE_WACOM(0xD3) },
+ { USB_DEVICE_WACOM(0xD8) },
+ { USB_DEVICE_WACOM(0xDA) },
+ { USB_DEVICE_WACOM(0xDB) },
{ USB_DEVICE_WACOM(0xF0) },
{ USB_DEVICE_WACOM(0xCC) },
{ USB_DEVICE_WACOM(0x90) },
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index f45f80f..73fd664 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -178,6 +178,7 @@
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+ {USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 84c46a1..e71c5fa 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -371,10 +371,15 @@
bio_put(bio);
}
-static void submit_flushes(mddev_t *mddev)
+static void md_submit_flush_data(struct work_struct *ws);
+
+static void submit_flushes(struct work_struct *ws)
{
+ mddev_t *mddev = container_of(ws, mddev_t, flush_work);
mdk_rdev_t *rdev;
+ INIT_WORK(&mddev->flush_work, md_submit_flush_data);
+ atomic_set(&mddev->flush_pending, 1);
rcu_read_lock();
list_for_each_entry_rcu(rdev, &mddev->disks, same_set)
if (rdev->raid_disk >= 0 &&
@@ -397,6 +402,8 @@
rdev_dec_pending(rdev, mddev);
}
rcu_read_unlock();
+ if (atomic_dec_and_test(&mddev->flush_pending))
+ queue_work(md_wq, &mddev->flush_work);
}
static void md_submit_flush_data(struct work_struct *ws)
@@ -404,8 +411,6 @@
mddev_t *mddev = container_of(ws, mddev_t, flush_work);
struct bio *bio = mddev->flush_bio;
- atomic_set(&mddev->flush_pending, 1);
-
if (bio->bi_size == 0)
/* an empty barrier - all done */
bio_endio(bio, 0);
@@ -414,10 +419,9 @@
if (mddev->pers->make_request(mddev, bio))
generic_make_request(bio);
}
- if (atomic_dec_and_test(&mddev->flush_pending)) {
- mddev->flush_bio = NULL;
- wake_up(&mddev->sb_wait);
- }
+
+ mddev->flush_bio = NULL;
+ wake_up(&mddev->sb_wait);
}
void md_flush_request(mddev_t *mddev, struct bio *bio)
@@ -429,13 +433,8 @@
mddev->flush_bio = bio;
spin_unlock_irq(&mddev->write_lock);
- atomic_set(&mddev->flush_pending, 1);
- INIT_WORK(&mddev->flush_work, md_submit_flush_data);
-
- submit_flushes(mddev);
-
- if (atomic_dec_and_test(&mddev->flush_pending))
- queue_work(md_wq, &mddev->flush_work);
+ INIT_WORK(&mddev->flush_work, submit_flushes);
+ queue_work(md_wq, &mddev->flush_work);
}
EXPORT_SYMBOL(md_flush_request);
@@ -5160,7 +5159,7 @@
PTR_ERR(rdev));
return PTR_ERR(rdev);
}
- /* set save_raid_disk if appropriate */
+ /* set saved_raid_disk if appropriate */
if (!mddev->persistent) {
if (info->state & (1<<MD_DISK_SYNC) &&
info->raid_disk < mddev->raid_disks)
@@ -5170,7 +5169,10 @@
} else
super_types[mddev->major_version].
validate_super(mddev, rdev);
- rdev->saved_raid_disk = rdev->raid_disk;
+ if (test_bit(In_sync, &rdev->flags))
+ rdev->saved_raid_disk = rdev->raid_disk;
+ else
+ rdev->saved_raid_disk = -1;
clear_bit(In_sync, &rdev->flags); /* just to be sure */
if (info->state & (1<<MD_DISK_WRITEMOSTLY))
@@ -6042,9 +6044,8 @@
|| kthread_should_stop(),
thread->timeout);
- clear_bit(THREAD_WAKEUP, &thread->flags);
-
- thread->run(thread->mddev);
+ if (test_and_clear_bit(THREAD_WAKEUP, &thread->flags))
+ thread->run(thread->mddev);
}
return 0;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index c67aa54..0641674 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2397,13 +2397,13 @@
return 0;
out_free_conf:
+ md_unregister_thread(mddev->thread);
if (conf->r10bio_pool)
mempool_destroy(conf->r10bio_pool);
safe_put_page(conf->tmppage);
kfree(conf->mirrors);
kfree(conf);
mddev->private = NULL;
- md_unregister_thread(mddev->thread);
out:
return -EIO;
}
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index dd90880..d8ae634 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -51,7 +51,7 @@
static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-static int __init pxa2xx_flash_probe(struct platform_device *pdev)
+static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
{
struct flash_platform_data *flash = pdev->dev.platform_data;
struct pxa2xx_flash_info *info;
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index cd41c58..15682ec 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -7,7 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#define CONFIG_MTD_NAND_OMAP_HWECC
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index c6e8631..2e2b762 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -381,11 +381,11 @@
__b44_set_flow_ctrl(bp, pause_enab);
}
-#ifdef SSB_DRIVER_MIPS
-extern char *nvram_get(char *name);
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
static void b44_wap54g10_workaround(struct b44 *bp)
{
- const char *str;
+ char buf[20];
u32 val;
int err;
@@ -394,10 +394,9 @@
* see https://dev.openwrt.org/ticket/146
* check and reset bit "isolate"
*/
- str = nvram_get("boardnum");
- if (!str)
+ if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
return;
- if (simple_strtoul(str, NULL, 0) == 2) {
+ if (simple_strtoul(buf, NULL, 0) == 2) {
err = __b44_readphy(bp, 0, MII_BMCR, &val);
if (err)
goto error;
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 36eca1c..e4465d2 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -1235,7 +1235,7 @@
i = 0;
netdev_for_each_mc_addr(ha, netdev)
- memcpy(req->mac[i].byte, ha->addr, ETH_ALEN);
+ memcpy(req->mac[i++].byte, ha->addr, ETH_ALEN);
} else {
req->promiscuous = 1;
}
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 863e73a..d255428 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -20,8 +20,8 @@
* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
-#define DRV_MODULE_VERSION "1.60.00-4"
-#define DRV_MODULE_RELDATE "2010/11/01"
+#define DRV_MODULE_VERSION "1.60.01-0"
+#define DRV_MODULE_RELDATE "2010/11/12"
#define BNX2X_BC_VER 0x040200
#define BNX2X_MULTI_QUEUE
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index 94d5f59..0af361e 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -1782,15 +1782,15 @@
}
#endif
-static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb,
- struct eth_tx_parse_bd_e2 *pbd,
- u32 xmit_type)
+static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb, u32 *parsing_data,
+ u32 xmit_type)
{
- pbd->parsing_data |= cpu_to_le16(skb_shinfo(skb)->gso_size) <<
- ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT;
+ *parsing_data |= (skb_shinfo(skb)->gso_size <<
+ ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT) &
+ ETH_TX_PARSE_BD_E2_LSO_MSS;
if ((xmit_type & XMIT_GSO_V6) &&
(ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6))
- pbd->parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
+ *parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
}
/**
@@ -1835,15 +1835,15 @@
* @return header len
*/
static inline u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb,
- struct eth_tx_parse_bd_e2 *pbd,
- u32 xmit_type)
+ u32 *parsing_data, u32 xmit_type)
{
- pbd->parsing_data |= cpu_to_le16(tcp_hdrlen(skb)/4) <<
- ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT;
+ *parsing_data |= ((tcp_hdrlen(skb)/4) <<
+ ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
+ ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
- pbd->parsing_data |= cpu_to_le16(((unsigned char *)tcp_hdr(skb) -
- skb->data) / 2) <<
- ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT;
+ *parsing_data |= ((((u8 *)tcp_hdr(skb) - skb->data) / 2) <<
+ ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) &
+ ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W;
return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data;
}
@@ -1912,6 +1912,7 @@
struct eth_tx_bd *tx_data_bd, *total_pkt_bd = NULL;
struct eth_tx_parse_bd_e1x *pbd_e1x = NULL;
struct eth_tx_parse_bd_e2 *pbd_e2 = NULL;
+ u32 pbd_e2_parsing_data = 0;
u16 pkt_prod, bd_prod;
int nbd, fp_index;
dma_addr_t mapping;
@@ -2033,8 +2034,9 @@
memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2));
/* Set PBD in checksum offload case */
if (xmit_type & XMIT_CSUM)
- hlen = bnx2x_set_pbd_csum_e2(bp,
- skb, pbd_e2, xmit_type);
+ hlen = bnx2x_set_pbd_csum_e2(bp, skb,
+ &pbd_e2_parsing_data,
+ xmit_type);
} else {
pbd_e1x = &fp->tx_desc_ring[bd_prod].parse_bd_e1x;
memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x));
@@ -2076,10 +2078,18 @@
bd_prod = bnx2x_tx_split(bp, fp, tx_buf, &tx_start_bd,
hlen, bd_prod, ++nbd);
if (CHIP_IS_E2(bp))
- bnx2x_set_pbd_gso_e2(skb, pbd_e2, xmit_type);
+ bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data,
+ xmit_type);
else
bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type);
}
+
+ /* Set the PBD's parsing_data field if not zero
+ * (for the chips newer than 57711).
+ */
+ if (pbd_e2_parsing_data)
+ pbd_e2->parsing_data = cpu_to_le32(pbd_e2_parsing_data);
+
tx_data_bd = (struct eth_tx_bd *)tx_start_bd;
/* Handle fragmented skb */
diff --git a/drivers/net/bnx2x/bnx2x_init_ops.h b/drivers/net/bnx2x/bnx2x_init_ops.h
index a306b0e..66df29f 100644
--- a/drivers/net/bnx2x/bnx2x_init_ops.h
+++ b/drivers/net/bnx2x/bnx2x_init_ops.h
@@ -838,7 +838,7 @@
/****************************************************************************
* SRC initializations
****************************************************************************/
-
+#ifdef BCM_CNIC
/* called during init func stage */
static void bnx2x_src_init_t2(struct bnx2x *bp, struct src_ent *t2,
dma_addr_t t2_mapping, int src_cid_count)
@@ -862,5 +862,5 @@
U64_HI((u64)t2_mapping +
(src_cid_count-1) * sizeof(struct src_ent)));
}
-
+#endif
#endif /* BNX2X_INIT_OPS_H */
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 71a1697..d0ea760 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -171,7 +171,7 @@
/*----------------------------- Global variables ----------------------------*/
#ifdef CONFIG_NET_POLL_CONTROLLER
-cpumask_var_t netpoll_block_tx;
+atomic_t netpoll_block_tx = ATOMIC_INIT(0);
#endif
static const char * const version =
@@ -1576,7 +1576,7 @@
/* If this is the first slave, then we need to set the master's hardware
* address to be the same as the slave's. */
- if (bond->slave_cnt == 0)
+ if (is_zero_ether_addr(bond->dev->dev_addr))
memcpy(bond->dev->dev_addr, slave_dev->dev_addr,
slave_dev->addr_len);
@@ -5299,13 +5299,6 @@
if (res)
goto out;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- if (!alloc_cpumask_var(&netpoll_block_tx, GFP_KERNEL)) {
- res = -ENOMEM;
- goto out;
- }
-#endif
-
res = register_pernet_subsys(&bond_net_ops);
if (res)
goto out;
@@ -5334,9 +5327,6 @@
rtnl_link_unregister(&bond_link_ops);
err_link:
unregister_pernet_subsys(&bond_net_ops);
-#ifdef CONFIG_NET_POLL_CONTROLLER
- free_cpumask_var(netpoll_block_tx);
-#endif
goto out;
}
@@ -5353,7 +5343,10 @@
unregister_pernet_subsys(&bond_net_ops);
#ifdef CONFIG_NET_POLL_CONTROLLER
- free_cpumask_var(netpoll_block_tx);
+ /*
+ * Make sure we don't have an imbalance on our netpoll blocking
+ */
+ WARN_ON(atomic_read(&netpoll_block_tx));
#endif
}
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 4eedb12..c2f08135 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -119,26 +119,22 @@
#ifdef CONFIG_NET_POLL_CONTROLLER
-extern cpumask_var_t netpoll_block_tx;
+extern atomic_t netpoll_block_tx;
static inline void block_netpoll_tx(void)
{
- preempt_disable();
- BUG_ON(cpumask_test_and_set_cpu(smp_processor_id(),
- netpoll_block_tx));
+ atomic_inc(&netpoll_block_tx);
}
static inline void unblock_netpoll_tx(void)
{
- BUG_ON(!cpumask_test_and_clear_cpu(smp_processor_id(),
- netpoll_block_tx));
- preempt_enable();
+ atomic_dec(&netpoll_block_tx);
}
static inline int is_netpoll_tx_blocked(struct net_device *dev)
{
if (unlikely(dev->priv_flags & IFF_IN_NETPOLL))
- return cpumask_test_cpu(smp_processor_id(), netpoll_block_tx);
+ return atomic_read(&netpoll_block_tx);
return 0;
}
#else
diff --git a/drivers/net/caif/caif_shm_u5500.c b/drivers/net/caif/caif_shm_u5500.c
index 1cd90da..32b1c6f 100644
--- a/drivers/net/caif/caif_shm_u5500.c
+++ b/drivers/net/caif/caif_shm_u5500.c
@@ -5,7 +5,7 @@
* License terms: GNU General Public License (GPL) version 2
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ":" __func__ "():" fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
#include <linux/version.h>
#include <linux/init.h>
diff --git a/drivers/net/caif/caif_shmcore.c b/drivers/net/caif/caif_shmcore.c
index 19f9c06..8051116 100644
--- a/drivers/net/caif/caif_shmcore.c
+++ b/drivers/net/caif/caif_shmcore.c
@@ -6,7 +6,7 @@
* License terms: GNU General Public License (GPL) version 2
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ":" __func__ "():" fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
#include <linux/spinlock.h>
#include <linux/sched.h>
diff --git a/drivers/net/cxgb4/t4_hw.c b/drivers/net/cxgb4/t4_hw.c
index bb813d9..e97521c 100644
--- a/drivers/net/cxgb4/t4_hw.c
+++ b/drivers/net/cxgb4/t4_hw.c
@@ -2408,7 +2408,7 @@
if (index < NEXACT_MAC)
ret++;
else if (hash)
- *hash |= (1 << hash_mac_addr(addr[i]));
+ *hash |= (1ULL << hash_mac_addr(addr[i]));
}
return ret;
}
diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index d887a76..6bf464a 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -2269,6 +2269,7 @@
{
struct sge *s = &adapter->sge;
int q10g, n10g, qidx, pidx, qs;
+ size_t iqe_size;
/*
* We should not be called till we know how many Queue Sets we can
@@ -2313,6 +2314,13 @@
s->ethqsets = qidx;
/*
+ * The Ingress Queue Entry Size for our various Response Queues needs
+ * to be big enough to accommodate the largest message we can receive
+ * from the chip/firmware; which is 64 bytes ...
+ */
+ iqe_size = 64;
+
+ /*
* Set up default Queue Set parameters ... Start off with the
* shortest interrupt holdoff timer.
*/
@@ -2320,7 +2328,7 @@
struct sge_eth_rxq *rxq = &s->ethrxq[qs];
struct sge_eth_txq *txq = &s->ethtxq[qs];
- init_rspq(&rxq->rspq, 0, 0, 1024, L1_CACHE_BYTES);
+ init_rspq(&rxq->rspq, 0, 0, 1024, iqe_size);
rxq->fl.size = 72;
txq->q.size = 1024;
}
@@ -2329,8 +2337,7 @@
* The firmware event queue is used for link state changes and
* notifications of TX DMA completions.
*/
- init_rspq(&s->fw_evtq, SGE_TIMER_RSTRT_CNTR, 0, 512,
- L1_CACHE_BYTES);
+ init_rspq(&s->fw_evtq, SGE_TIMER_RSTRT_CNTR, 0, 512, iqe_size);
/*
* The forwarded interrupt queue is used when we're in MSI interrupt
@@ -2346,7 +2353,7 @@
* any time ...
*/
init_rspq(&s->intrq, SGE_TIMER_RSTRT_CNTR, 0, MSIX_ENTRIES + 1,
- L1_CACHE_BYTES);
+ iqe_size);
}
/*
diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c
index 75b099c..1f37ee6 100644
--- a/drivers/net/ehea/ehea_ethtool.c
+++ b/drivers/net/ehea/ehea_ethtool.c
@@ -261,6 +261,13 @@
}
+static int ehea_set_flags(struct net_device *dev, u32 data)
+{
+ return ethtool_op_set_flags(dev, data, ETH_FLAG_LRO
+ | ETH_FLAG_TXVLAN
+ | ETH_FLAG_RXVLAN);
+}
+
const struct ethtool_ops ehea_ethtool_ops = {
.get_settings = ehea_get_settings,
.get_drvinfo = ehea_get_drvinfo,
@@ -273,6 +280,8 @@
.get_ethtool_stats = ehea_get_ethtool_stats,
.get_rx_csum = ehea_get_rx_csum,
.set_settings = ehea_set_settings,
+ .get_flags = ethtool_op_get_flags,
+ .set_flags = ehea_set_flags,
.nway_reset = ehea_nway_reset, /* Restart autonegotiation */
};
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 3d0af08..b95f087cd 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -683,7 +683,7 @@
int vlan_extracted = ((cqe->status & EHEA_CQE_VLAN_TAG_XTRACT) &&
pr->port->vgrp);
- if (use_lro) {
+ if (skb->dev->features & NETIF_F_LRO) {
if (vlan_extracted)
lro_vlan_hwaccel_receive_skb(&pr->lro_mgr, skb,
pr->port->vgrp,
@@ -787,7 +787,7 @@
}
cqe = ehea_poll_rq1(qp, &wqe_index);
}
- if (use_lro)
+ if (dev->features & NETIF_F_LRO)
lro_flush_all(&pr->lro_mgr);
pr->rx_packets += processed;
@@ -3278,6 +3278,9 @@
| NETIF_F_LLTX;
dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT;
+ if (use_lro)
+ dev->features |= NETIF_F_LRO;
+
INIT_WORK(&port->reset_task, ehea_reset_port);
ret = register_netdev(dev);
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index a466ef9..aa28b27 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -1962,7 +1962,8 @@
case VNIC_DEV_INTR_MODE_MSIX:
for (i = 0; i < enic->rq_count; i++) {
intr = enic_msix_rq_intr(enic, i);
- enic_isr_msix_rq(enic->msix_entry[intr].vector, enic);
+ enic_isr_msix_rq(enic->msix_entry[intr].vector,
+ &enic->napi[i]);
}
intr = enic_msix_wq_intr(enic, i);
enic_isr_msix_wq(enic->msix_entry[intr].vector, enic);
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index ab9f675..fe337bd 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -104,6 +104,8 @@
rcu_read_unlock();
dev_kfree_skb(skb);
stats->tx_dropped++;
+ if (skb_queue_len(&dp->tq) != 0)
+ goto resched;
break;
}
rcu_read_unlock();
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index fbad4d8..eee0b29 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -4771,6 +4771,9 @@
adapter->rx_ring[i] = NULL;
}
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+
ixgbe_free_q_vectors(adapter);
ixgbe_reset_interrupt_capability(adapter);
}
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index cb3d13e..35fda5a 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -64,7 +64,7 @@
config ICPLUS_PHY
tristate "Drivers for ICPlus PHYs"
---help---
- Currently supports the IP175C PHY.
+ Currently supports the IP175C and IP1001 PHYs.
config REALTEK_PHY
tristate "Drivers for Realtek PHYs"
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index c1d2d25..9a09e24 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -30,7 +30,7 @@
#include <asm/irq.h>
#include <asm/uaccess.h>
-MODULE_DESCRIPTION("ICPlus IP175C PHY driver");
+MODULE_DESCRIPTION("ICPlus IP175C/IC1001 PHY drivers");
MODULE_AUTHOR("Michael Barkowski");
MODULE_LICENSE("GPL");
@@ -89,6 +89,33 @@
return 0;
}
+static int ip1001_config_init(struct phy_device *phydev)
+{
+ int err, value;
+
+ /* Software Reset PHY */
+ value = phy_read(phydev, MII_BMCR);
+ value |= BMCR_RESET;
+ err = phy_write(phydev, MII_BMCR, value);
+ if (err < 0)
+ return err;
+
+ do {
+ value = phy_read(phydev, MII_BMCR);
+ } while (value & BMCR_RESET);
+
+ /* Additional delay (2ns) used to adjust RX clock phase
+ * at GMII/ RGMII interface */
+ value = phy_read(phydev, 16);
+ value |= 0x3;
+
+ err = phy_write(phydev, 16, value);
+ if (err < 0)
+ return err;
+
+ return err;
+}
+
static int ip175c_read_status(struct phy_device *phydev)
{
if (phydev->addr == 4) /* WAN port */
@@ -121,21 +148,43 @@
.driver = { .owner = THIS_MODULE,},
};
-static int __init ip175c_init(void)
+static struct phy_driver ip1001_driver = {
+ .phy_id = 0x02430d90,
+ .name = "ICPlus IP1001",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_GBIT_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause,
+ .config_init = &ip1001_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static int __init icplus_init(void)
{
+ int ret = 0;
+
+ ret = phy_driver_register(&ip1001_driver);
+ if (ret < 0)
+ return -ENODEV;
+
return phy_driver_register(&ip175c_driver);
}
-static void __exit ip175c_exit(void)
+static void __exit icplus_exit(void)
{
+ phy_driver_unregister(&ip1001_driver);
phy_driver_unregister(&ip175c_driver);
}
-module_init(ip175c_init);
-module_exit(ip175c_exit);
+module_init(icplus_init);
+module_exit(icplus_exit);
static struct mdio_device_id __maybe_unused icplus_tbl[] = {
{ 0x02430d80, 0x0ffffff0 },
+ { 0x02430d90, 0x0ffffff0 },
{ }
};
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index d72fb05..78c0e3c 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -948,7 +948,7 @@
abort:
kfree_skb(skb);
- return 0;
+ return 1;
}
/************************************************************************
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 2282139..9787dff 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -2083,6 +2083,7 @@
u32 mailbox_in;
u32 mailbox_out;
struct mbox_params idc_mbc;
+ struct mutex mpi_mutex;
int tx_ring_size;
int rx_ring_size;
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 528eaef..2555b1d 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -4629,6 +4629,7 @@
INIT_DELAYED_WORK(&qdev->mpi_idc_work, ql_mpi_idc_work);
INIT_DELAYED_WORK(&qdev->mpi_core_to_log, ql_mpi_core_to_log);
init_completion(&qdev->ide_completion);
+ mutex_init(&qdev->mpi_mutex);
if (!cards_found) {
dev_info(&pdev->dev, "%s\n", DRV_STRING);
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 0e7c7c7..a2e919b 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -534,6 +534,7 @@
int status;
unsigned long count;
+ mutex_lock(&qdev->mpi_mutex);
/* Begin polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
@@ -603,6 +604,7 @@
end:
/* End polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
+ mutex_unlock(&qdev->mpi_mutex);
return status;
}
@@ -1099,9 +1101,7 @@
static int ql_set_port_cfg(struct ql_adapter *qdev)
{
int status;
- rtnl_lock();
status = ql_mb_set_port_cfg(qdev);
- rtnl_unlock();
if (status)
return status;
status = ql_idc_wait(qdev);
@@ -1122,9 +1122,7 @@
container_of(work, struct ql_adapter, mpi_port_cfg_work.work);
int status;
- rtnl_lock();
status = ql_mb_get_port_cfg(qdev);
- rtnl_unlock();
if (status) {
netif_err(qdev, drv, qdev->ndev,
"Bug: Failed to get port config data.\n");
@@ -1167,7 +1165,6 @@
u32 aen;
int timeout;
- rtnl_lock();
aen = mbcp->mbox_out[1] >> 16;
timeout = (mbcp->mbox_out[1] >> 8) & 0xf;
@@ -1231,7 +1228,6 @@
}
break;
}
- rtnl_unlock();
}
void ql_mpi_work(struct work_struct *work)
@@ -1242,7 +1238,7 @@
struct mbox_params *mbcp = &mbc;
int err = 0;
- rtnl_lock();
+ mutex_lock(&qdev->mpi_mutex);
/* Begin polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
@@ -1259,7 +1255,7 @@
/* End polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
- rtnl_unlock();
+ mutex_unlock(&qdev->mpi_mutex);
ql_enable_completion_interrupt(qdev, 0);
}
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 7d33ef4..53b13de 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -744,26 +744,36 @@
mdio_write(ioaddr, MII_BMCR, val & 0xffff);
}
-static void rtl8169_check_link_status(struct net_device *dev,
+static void __rtl8169_check_link_status(struct net_device *dev,
struct rtl8169_private *tp,
- void __iomem *ioaddr)
+ void __iomem *ioaddr,
+ bool pm)
{
unsigned long flags;
spin_lock_irqsave(&tp->lock, flags);
if (tp->link_ok(ioaddr)) {
/* This is to cancel a scheduled suspend if there's one. */
- pm_request_resume(&tp->pci_dev->dev);
+ if (pm)
+ pm_request_resume(&tp->pci_dev->dev);
netif_carrier_on(dev);
netif_info(tp, ifup, dev, "link up\n");
} else {
netif_carrier_off(dev);
netif_info(tp, ifdown, dev, "link down\n");
- pm_schedule_suspend(&tp->pci_dev->dev, 100);
+ if (pm)
+ pm_schedule_suspend(&tp->pci_dev->dev, 100);
}
spin_unlock_irqrestore(&tp->lock, flags);
}
+static void rtl8169_check_link_status(struct net_device *dev,
+ struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ __rtl8169_check_link_status(dev, tp, ioaddr, false);
+}
+
#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
static u32 __rtl8169_get_wol(struct rtl8169_private *tp)
@@ -4600,7 +4610,7 @@
}
if (status & LinkChg)
- rtl8169_check_link_status(dev, tp, ioaddr);
+ __rtl8169_check_link_status(dev, tp, ioaddr, true);
/* We need to see the lastest version of tp->intr_mask to
* avoid ignoring an MSI interrupt and having to wait for
@@ -4890,11 +4900,7 @@
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
- if (!tp->TxDescArray)
- return 0;
-
- rtl8169_check_link_status(dev, tp, tp->mmio_addr);
- return -EBUSY;
+ return tp->TxDescArray ? -EBUSY : 0;
}
static const struct dev_pm_ops rtl8169_pm_ops = {
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 05df20e..fb83cdd 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -197,7 +197,9 @@
static void efx_remove_channels(struct efx_nic *efx);
static void efx_remove_port(struct efx_nic *efx);
+static void efx_init_napi(struct efx_nic *efx);
static void efx_fini_napi(struct efx_nic *efx);
+static void efx_fini_napi_channel(struct efx_channel *channel);
static void efx_fini_struct(struct efx_nic *efx);
static void efx_start_all(struct efx_nic *efx);
static void efx_stop_all(struct efx_nic *efx);
@@ -335,8 +337,10 @@
/* Disable interrupts and wait for ISRs to complete */
efx_nic_disable_interrupts(efx);
- if (efx->legacy_irq)
+ if (efx->legacy_irq) {
synchronize_irq(efx->legacy_irq);
+ efx->legacy_irq_enabled = false;
+ }
if (channel->irq)
synchronize_irq(channel->irq);
@@ -351,6 +355,8 @@
efx_channel_processed(channel);
napi_enable(&channel->napi_str);
+ if (efx->legacy_irq)
+ efx->legacy_irq_enabled = true;
efx_nic_enable_interrupts(efx);
}
@@ -426,6 +432,7 @@
*channel = *old_channel;
+ channel->napi_dev = NULL;
memset(&channel->eventq, 0, sizeof(channel->eventq));
rx_queue = &channel->rx_queue;
@@ -736,9 +743,13 @@
if (rc)
goto rollback;
+ efx_init_napi(efx);
+
/* Destroy old channels */
- for (i = 0; i < efx->n_channels; i++)
+ for (i = 0; i < efx->n_channels; i++) {
+ efx_fini_napi_channel(other_channel[i]);
efx_remove_channel(other_channel[i]);
+ }
out:
/* Free unused channel structures */
for (i = 0; i < efx->n_channels; i++)
@@ -1400,6 +1411,8 @@
efx_start_channel(channel);
}
+ if (efx->legacy_irq)
+ efx->legacy_irq_enabled = true;
efx_nic_enable_interrupts(efx);
/* Switch to event based MCDI completions after enabling interrupts.
@@ -1460,8 +1473,10 @@
/* Disable interrupts and wait for ISR to complete */
efx_nic_disable_interrupts(efx);
- if (efx->legacy_irq)
+ if (efx->legacy_irq) {
synchronize_irq(efx->legacy_irq);
+ efx->legacy_irq_enabled = false;
+ }
efx_for_each_channel(channel, efx) {
if (channel->irq)
synchronize_irq(channel->irq);
@@ -1593,7 +1608,7 @@
*
**************************************************************************/
-static int efx_init_napi(struct efx_nic *efx)
+static void efx_init_napi(struct efx_nic *efx)
{
struct efx_channel *channel;
@@ -1602,18 +1617,21 @@
netif_napi_add(channel->napi_dev, &channel->napi_str,
efx_poll, napi_weight);
}
- return 0;
+}
+
+static void efx_fini_napi_channel(struct efx_channel *channel)
+{
+ if (channel->napi_dev)
+ netif_napi_del(&channel->napi_str);
+ channel->napi_dev = NULL;
}
static void efx_fini_napi(struct efx_nic *efx)
{
struct efx_channel *channel;
- efx_for_each_channel(channel, efx) {
- if (channel->napi_dev)
- netif_napi_del(&channel->napi_str);
- channel->napi_dev = NULL;
- }
+ efx_for_each_channel(channel, efx)
+ efx_fini_napi_channel(channel);
}
/**************************************************************************
@@ -2335,9 +2353,7 @@
if (rc)
goto fail1;
- rc = efx_init_napi(efx);
- if (rc)
- goto fail2;
+ efx_init_napi(efx);
rc = efx->type->init(efx);
if (rc) {
@@ -2368,7 +2384,6 @@
efx->type->fini(efx);
fail3:
efx_fini_napi(efx);
- fail2:
efx_remove_all(efx);
fail1:
return rc;
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 0a7e26d..b137c88 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -621,6 +621,7 @@
* @pci_dev: The PCI device
* @type: Controller type attributes
* @legacy_irq: IRQ number
+ * @legacy_irq_enabled: Are IRQs enabled on NIC (INT_EN_KER register)?
* @workqueue: Workqueue for port reconfigures and the HW monitor.
* Work items do not hold and must not acquire RTNL.
* @workqueue_name: Name of workqueue
@@ -709,6 +710,7 @@
struct pci_dev *pci_dev;
const struct efx_nic_type *type;
int legacy_irq;
+ bool legacy_irq_enabled;
struct workqueue_struct *workqueue;
char workqueue_name[16];
struct work_struct reset_work;
diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c
index 41c36b9..67cb0c9 100644
--- a/drivers/net/sfc/nic.c
+++ b/drivers/net/sfc/nic.c
@@ -1418,6 +1418,12 @@
u32 queues;
int syserr;
+ /* Could this be ours? If interrupts are disabled then the
+ * channel state may not be valid.
+ */
+ if (!efx->legacy_irq_enabled)
+ return result;
+
/* Read the ISR which also ACKs the interrupts */
efx_readd(efx, ®, FR_BZ_INT_ISR0);
queues = EFX_EXTRACT_DWORD(reg, 0, 31);
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 06bc603..2114837 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -1509,6 +1509,8 @@
pr_warning("\tno valid MAC address;"
"please, use ifconfig or nwhwconfig!\n");
+ spin_lock_init(&priv->lock);
+
ret = register_netdev(dev);
if (ret) {
pr_err("%s: ERROR %i registering the device\n",
@@ -1520,8 +1522,6 @@
dev->name, (dev->features & NETIF_F_SG) ? "on" : "off",
(dev->features & NETIF_F_HW_CSUM) ? "on" : "off");
- spin_lock_init(&priv->lock);
-
return ret;
}
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index a9f7d5d..7064e03 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -688,9 +688,6 @@
DMFE_DBUG(0, "dmfe_start_xmit", 0);
- /* Resource flag check */
- netif_stop_queue(dev);
-
/* Too large packet check */
if (skb->len > MAX_PACKET_SIZE) {
pr_err("big packet = %d\n", (u16)skb->len);
@@ -698,6 +695,9 @@
return NETDEV_TX_OK;
}
+ /* Resource flag check */
+ netif_stop_queue(dev);
+
spin_lock_irqsave(&db->lock, flags);
/* No Tx resource check, it never happen nromally */
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 62e9e8d..812edf8 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -958,10 +958,6 @@
/* Packet is complete. Inject into stack. */
/* We have IP packet here */
odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
- /* don't check it */
- odev->skb_rx_buf->ip_summed =
- CHECKSUM_UNNECESSARY;
-
skb_reset_mac_header(odev->skb_rx_buf);
/* Ship it off to the kernel */
diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c
index ea476cb..e305274 100644
--- a/drivers/net/wan/hd64572.c
+++ b/drivers/net/wan/hd64572.c
@@ -293,6 +293,7 @@
struct net_device *dev = port->netdev;
card_t* card = port->card;
u8 stat;
+ unsigned count = 0;
spin_lock(&port->lock);
@@ -316,10 +317,12 @@
dev->stats.tx_bytes += readw(&desc->len);
}
writeb(0, &desc->stat); /* Free descriptor */
+ count++;
port->txlast = (port->txlast + 1) % card->tx_ring_buffers;
}
- netif_wake_queue(dev);
+ if (count)
+ netif_wake_queue(dev);
spin_unlock(&port->lock);
}
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 8251946..42ed923 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1917,7 +1917,8 @@
sc->bmisscount = 0;
}
- if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) {
+ if ((sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) ||
+ sc->opmode == NL80211_IFTYPE_MESH_POINT) {
u64 tsf = ath5k_hw_get_tsf64(ah);
u32 tsftu = TSF_TO_TU(tsf);
int slot = ((tsftu % sc->bintval) * ATH_BCBUF) / sc->bintval;
@@ -1949,8 +1950,9 @@
/* NB: hw still stops DMA, so proceed */
}
- /* refresh the beacon for AP mode */
- if (sc->opmode == NL80211_IFTYPE_AP)
+ /* refresh the beacon for AP or MESH mode */
+ if (sc->opmode == NL80211_IFTYPE_AP ||
+ sc->opmode == NL80211_IFTYPE_MESH_POINT)
ath5k_beacon_update(sc->hw, vif);
ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
@@ -2851,7 +2853,8 @@
/* Assign the vap/adhoc to a beacon xmit slot. */
if ((avf->opmode == NL80211_IFTYPE_AP) ||
- (avf->opmode == NL80211_IFTYPE_ADHOC)) {
+ (avf->opmode == NL80211_IFTYPE_ADHOC) ||
+ (avf->opmode == NL80211_IFTYPE_MESH_POINT)) {
int slot;
WARN_ON(list_empty(&sc->bcbuf));
@@ -2870,7 +2873,7 @@
sc->bslot[avf->bslot] = vif;
if (avf->opmode == NL80211_IFTYPE_AP)
sc->num_ap_vifs++;
- else
+ else if (avf->opmode == NL80211_IFTYPE_ADHOC)
sc->num_adhoc_vifs++;
}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index c418235..a7b82f0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -55,6 +55,8 @@
#define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */
#define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */
+#define CTL(_tpower, _flag) ((_tpower) | ((_flag) << 6))
+
static const struct ar9300_eeprom ar9300_default = {
.eepromVersion = 2,
.templateVersion = 2,
@@ -290,20 +292,21 @@
}
},
.ctlPowerData_2G = {
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 1}, {60, 0}, {60, 0}, {60, 1} } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
- { { {60, 1}, {60, 0}, {0, 0}, {0, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+ { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
- { { {60, 0}, {60, 1}, {60, 1}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 1}, {60, 1} } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
},
.modalHeader5G = {
/* 4 idle,t1,t2,b (4 bits per setting) */
@@ -568,56 +571,56 @@
.ctlPowerData_5G = {
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
}
},
{
{
- {60, 0}, {60, 1}, {60, 0}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
}
},
{
{
- {60, 0}, {60, 1}, {60, 1}, {60, 0},
- {60, 1}, {60, 0}, {60, 0}, {60, 0},
+ CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+ CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
- {60, 0}, {60, 0}, {60, 0}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+ CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 0}, {60, 0}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
}
},
{
{
- {60, 1}, {60, 1}, {60, 0}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 0}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 0}, {60, 1},
+ CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
}
},
}
@@ -1827,9 +1830,9 @@
struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G;
if (is2GHz)
- return ctl_2g[idx].ctlEdges[edge].tPower;
+ return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge]);
else
- return ctl_5g[idx].ctlEdges[edge].tPower;
+ return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge]);
}
static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep,
@@ -1847,12 +1850,12 @@
if (is2GHz) {
if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq &&
- ctl_2g[idx].ctlEdges[edge - 1].flag)
- return ctl_2g[idx].ctlEdges[edge - 1].tPower;
+ CTL_EDGE_FLAGS(ctl_2g[idx].ctlEdges[edge - 1]))
+ return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge - 1]);
} else {
if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq &&
- ctl_5g[idx].ctlEdges[edge - 1].flag)
- return ctl_5g[idx].ctlEdges[edge - 1].tPower;
+ CTL_EDGE_FLAGS(ctl_5g[idx].ctlEdges[edge - 1]))
+ return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge - 1]);
}
return AR9300_MAX_RATE_POWER;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
index 3c533bb..655b303 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
@@ -261,17 +261,12 @@
u8 tPow2x[14];
} __packed;
-struct cal_ctl_edge_pwr {
- u8 tPower:6,
- flag:2;
-} __packed;
-
struct cal_ctl_data_2g {
- struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_2G];
+ u8 ctlEdges[AR9300_NUM_BAND_EDGES_2G];
} __packed;
struct cal_ctl_data_5g {
- struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_5G];
+ u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G];
} __packed;
struct ar9300_eeprom {
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 170d44a..0963071 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -21,6 +21,7 @@
#include <linux/device.h>
#include <linux/leds.h>
#include <linux/completion.h>
+#include <linux/pm_qos_params.h>
#include "debug.h"
#include "common.h"
@@ -328,7 +329,7 @@
struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype);
void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq);
int ath_tx_setup(struct ath_softc *sc, int haltype);
-void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx);
+bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx);
void ath_draintxq(struct ath_softc *sc,
struct ath_txq *txq, bool retry_tx);
void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an);
@@ -646,6 +647,8 @@
struct ath_descdma txsdma;
struct ath_ant_comb ant_comb;
+
+ struct pm_qos_request_list pm_qos_req;
};
struct ath_wiphy {
@@ -675,7 +678,6 @@
}
extern struct ieee80211_ops ath9k_ops;
-extern struct pm_qos_request_list ath9k_pm_qos_req;
extern int modparam_nohwcrypt;
extern int led_blink;
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c
index 1266333..2bbf94d 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -240,16 +240,16 @@
for (i = 0; (i < num_band_edges) &&
(pRdEdgesPower[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
if (freq == ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel, is2GHz)) {
- twiceMaxEdgePower = pRdEdgesPower[i].tPower;
+ twiceMaxEdgePower = CTL_EDGE_TPOWER(pRdEdgesPower[i].ctl);
break;
} else if ((i > 0) &&
(freq < ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel,
is2GHz))) {
if (ath9k_hw_fbin2freq(pRdEdgesPower[i - 1].bChannel,
is2GHz) < freq &&
- pRdEdgesPower[i - 1].flag) {
+ CTL_EDGE_FLAGS(pRdEdgesPower[i - 1].ctl)) {
twiceMaxEdgePower =
- pRdEdgesPower[i - 1].tPower;
+ CTL_EDGE_TPOWER(pRdEdgesPower[i - 1].ctl);
}
break;
}
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index dacb45e..dd59f09 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -233,6 +233,18 @@
#define AR9287_CHECKSUM_LOCATION (AR9287_EEP_START_LOC + 1)
+#define CTL_EDGE_TPOWER(_ctl) ((_ctl) & 0x3f)
+#define CTL_EDGE_FLAGS(_ctl) (((_ctl) >> 6) & 0x03)
+
+#define LNA_CTL_BUF_MODE BIT(0)
+#define LNA_CTL_ISEL_LO BIT(1)
+#define LNA_CTL_ISEL_HI BIT(2)
+#define LNA_CTL_BUF_IN BIT(3)
+#define LNA_CTL_FEM_BAND BIT(4)
+#define LNA_CTL_LOCAL_BIAS BIT(5)
+#define LNA_CTL_FORCE_XPA BIT(6)
+#define LNA_CTL_USE_ANT1 BIT(7)
+
enum eeprom_param {
EEP_NFTHRESH_5,
EEP_NFTHRESH_2,
@@ -378,10 +390,7 @@
u8 xatten2Margin[AR5416_MAX_CHAINS];
u8 ob_ch1;
u8 db_ch1;
- u8 useAnt1:1,
- force_xpaon:1,
- local_bias:1,
- femBandSelectUsed:1, xlnabufin:1, xlnaisel:2, xlnabufmode:1;
+ u8 lna_ctl;
u8 miscBits;
u16 xpaBiasLvlFreq[3];
u8 futureModal[6];
@@ -535,18 +544,10 @@
u8 tPow2x[8];
} __packed;
-
-#ifdef __BIG_ENDIAN_BITFIELD
struct cal_ctl_edges {
u8 bChannel;
- u8 flag:2, tPower:6;
+ u8 ctl;
} __packed;
-#else
-struct cal_ctl_edges {
- u8 bChannel;
- u8 tPower:6, flag:2;
-} __packed;
-#endif
struct cal_data_op_loop_ar9287 {
u8 pwrPdg[2][5];
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c
index 76b4d65..a3ccb1b 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
@@ -451,9 +451,10 @@
ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
AR_AN_TOP2_LOCALBIAS,
AR_AN_TOP2_LOCALBIAS_S,
- pModal->local_bias);
+ !!(pModal->lna_ctl &
+ LNA_CTL_LOCAL_BIAS));
REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG,
- pModal->force_xpaon);
+ !!(pModal->lna_ctl & LNA_CTL_FORCE_XPA));
}
REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
@@ -1062,15 +1063,19 @@
case 1:
break;
case 2:
- scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ else
+ scaledPower = 0;
break;
case 3:
- scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ else
+ scaledPower = 0;
break;
}
- scaledPower = max((u16)0, scaledPower);
-
if (IS_CHAN_2GHZ(chan)) {
numCtlModes = ARRAY_SIZE(ctlModesFor11g) -
SUB_NUM_CTL_MODES_AT_2G_40;
@@ -1428,9 +1433,9 @@
num_ant_config = 1;
- if (pBase->version >= 0x0E0D)
- if (pModal->useAnt1)
- num_ant_config += 1;
+ if (pBase->version >= 0x0E0D &&
+ (pModal->lna_ctl & LNA_CTL_USE_ANT1))
+ num_ant_config += 1;
return num_ant_config;
}
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index dfb6560..0de3c3d 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1024,6 +1024,13 @@
struct hif_device_usb *hif_dev =
(struct hif_device_usb *) usb_get_intfdata(interface);
+ /*
+ * The device has to be set to FULLSLEEP mode in case no
+ * interface is up.
+ */
+ if (!(hif_dev->flags & HIF_USB_START))
+ ath9k_htc_suspend(hif_dev->htc_handle);
+
ath9k_hif_usb_dealloc_urbs(hif_dev);
return 0;
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 75ecf6a..c3b561d 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -455,6 +455,8 @@
void ath9k_htc_ps_wakeup(struct ath9k_htc_priv *priv);
void ath9k_htc_ps_restore(struct ath9k_htc_priv *priv);
void ath9k_ps_work(struct work_struct *work);
+bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
+ enum ath9k_power_mode mode);
void ath9k_start_rfkill_poll(struct ath9k_htc_priv *priv);
void ath9k_init_leds(struct ath9k_htc_priv *priv);
@@ -464,6 +466,7 @@
u16 devid, char *product);
void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug);
#ifdef CONFIG_PM
+void ath9k_htc_suspend(struct htc_target *htc_handle);
int ath9k_htc_resume(struct htc_target *htc_handle);
#endif
#ifdef CONFIG_ATH9K_HTC_DEBUGFS
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 7c8a38d..8776f49 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -891,6 +891,12 @@
}
#ifdef CONFIG_PM
+
+void ath9k_htc_suspend(struct htc_target *htc_handle)
+{
+ ath9k_htc_setpower(htc_handle->drv_priv, ATH9K_PM_FULL_SLEEP);
+}
+
int ath9k_htc_resume(struct htc_target *htc_handle)
{
int ret;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 9a3be8d..51977ca 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -63,8 +63,8 @@
return mode;
}
-static bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
- enum ath9k_power_mode mode)
+bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
+ enum ath9k_power_mode mode)
{
bool ret;
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 6ebc68b..c7fbe25 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2044,7 +2044,8 @@
val = REG_READ(ah, AR7010_GPIO_IN);
return (MS(val, AR7010_GPIO_IN_VAL) & AR_GPIO_BIT(gpio)) == 0;
} else if (AR_SREV_9300_20_OR_LATER(ah))
- return MS_REG_READ(AR9300, gpio) != 0;
+ return (MS(REG_READ(ah, AR_GPIO_IN), AR9300_GPIO_IN_VAL) &
+ AR_GPIO_BIT(gpio)) != 0;
else if (AR_SREV_9271(ah))
return MS_REG_READ(AR9271, gpio) != 0;
else if (AR_SREV_9287_11_OR_LATER(ah))
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 92bc5c5..14b8ab3 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -15,7 +15,6 @@
*/
#include <linux/slab.h>
-#include <linux/pm_qos_params.h>
#include "ath9k.h"
@@ -180,8 +179,6 @@
.write = ath9k_iowrite32,
};
-struct pm_qos_request_list ath9k_pm_qos_req;
-
/**************************/
/* Initialization */
/**************************/
@@ -664,6 +661,8 @@
hw->flags |= IEEE80211_HW_MFP_CAPABLE;
hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_P2P_GO) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_WDS) |
BIT(NL80211_IFTYPE_STATION) |
@@ -759,7 +758,7 @@
ath_init_leds(sc);
ath_start_rfkill_poll(sc);
- pm_qos_add_request(&ath9k_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+ pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
PM_QOS_DEFAULT_VALUE);
return 0;
@@ -830,7 +829,7 @@
}
ieee80211_unregister_hw(hw);
- pm_qos_remove_request(&ath9k_pm_qos_req);
+ pm_qos_remove_request(&sc->pm_qos_req);
ath_rx_cleanup(sc);
ath_tx_cleanup(sc);
ath9k_deinit_softc(sc);
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 8c13479..c996963 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -703,8 +703,7 @@
rs->rs_phyerr = phyerr;
} else if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
rs->rs_status |= ATH9K_RXERR_DECRYPT;
- else if ((ads.ds_rxstatus8 & AR_MichaelErr) &&
- rs->rs_keyix != ATH9K_RXKEYIX_INVALID)
+ else if (ads.ds_rxstatus8 & AR_MichaelErr)
rs->rs_status |= ATH9K_RXERR_MIC;
else if (ads.ds_rxstatus8 & AR_KeyMiss)
rs->rs_status |= ATH9K_RXERR_DECRYPT;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 25d3ef4..c0c3464 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -15,7 +15,6 @@
*/
#include <linux/nl80211.h>
-#include <linux/pm_qos_params.h>
#include "ath9k.h"
#include "btcoex.h"
@@ -245,11 +244,12 @@
* the relevant bits of the h/w.
*/
ath9k_hw_set_interrupts(ah, 0);
- ath_drain_all_txq(sc, false);
+ stopped = ath_drain_all_txq(sc, false);
spin_lock_bh(&sc->rx.pcu_lock);
- stopped = ath_stoprecv(sc);
+ if (!ath_stoprecv(sc))
+ stopped = false;
/* XXX: do not flush receive queue here. We don't want
* to flush data frames already in queue because of
@@ -1244,7 +1244,7 @@
ath9k_btcoex_timer_resume(sc);
}
- pm_qos_update_request(&ath9k_pm_qos_req, 55);
+ pm_qos_update_request(&sc->pm_qos_req, 55);
mutex_unlock:
mutex_unlock(&sc->mutex);
@@ -1423,7 +1423,7 @@
sc->sc_flags |= SC_OP_INVALID;
- pm_qos_update_request(&ath9k_pm_qos_req, PM_QOS_DEFAULT_VALUE);
+ pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE);
mutex_unlock(&sc->mutex);
@@ -1520,7 +1520,6 @@
struct ath_softc *sc = aphy->sc;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_vif *avp = (void *)vif->drv_priv;
- int i;
ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n");
@@ -1534,21 +1533,24 @@
if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
(sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
(sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
+ /* Disable SWBA interrupt */
+ sc->sc_ah->imask &= ~ATH9K_INT_SWBA;
ath9k_ps_wakeup(sc);
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
ath9k_ps_restore(sc);
+ tasklet_kill(&sc->bcon_tasklet);
}
ath_beacon_return(sc, avp);
sc->sc_flags &= ~SC_OP_BEACONS;
- for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
- if (sc->beacon.bslot[i] == vif) {
- printk(KERN_DEBUG "%s: vif had allocated beacon "
- "slot\n", __func__);
- sc->beacon.bslot[i] = NULL;
- sc->beacon.bslot_aphy[i] = NULL;
- }
+ if (sc->nbcnvifs) {
+ /* Re-enable SWBA interrupt */
+ sc->sc_ah->imask |= ATH9K_INT_SWBA;
+ ath9k_ps_wakeup(sc);
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
+ ath9k_ps_restore(sc);
}
sc->nvifs--;
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 1a62e35..fdc2ec5 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -838,6 +838,10 @@
struct ath_rx_status *rx_stats,
bool *decrypt_error)
{
+#define is_mc_or_valid_tkip_keyix ((is_mc || \
+ (rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID && \
+ test_bit(rx_stats->rs_keyix, common->tkip_keymap))))
+
struct ath_hw *ah = common->ah;
__le16 fc;
u8 rx_status_len = ah->caps.rx_status_len;
@@ -879,15 +883,18 @@
if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) {
*decrypt_error = true;
} else if (rx_stats->rs_status & ATH9K_RXERR_MIC) {
+ bool is_mc;
/*
* The MIC error bit is only valid if the frame
* is not a control frame or fragment, and it was
* decrypted using a valid TKIP key.
*/
+ is_mc = !!is_multicast_ether_addr(hdr->addr1);
+
if (!ieee80211_is_ctl(fc) &&
!ieee80211_has_morefrags(fc) &&
!(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) &&
- test_bit(rx_stats->rs_keyix, common->tkip_keymap))
+ is_mc_or_valid_tkip_keyix)
rxs->flag |= RX_FLAG_MMIC_ERROR;
else
rx_stats->rs_status &= ~ATH9K_RXERR_MIC;
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index dddf579..2c6a22f 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -984,11 +984,13 @@
#define AR9287_GPIO_IN_VAL_S 11
#define AR9271_GPIO_IN_VAL 0xFFFF0000
#define AR9271_GPIO_IN_VAL_S 16
-#define AR9300_GPIO_IN_VAL 0x0001FFFF
-#define AR9300_GPIO_IN_VAL_S 0
#define AR7010_GPIO_IN_VAL 0x0000FFFF
#define AR7010_GPIO_IN_VAL_S 0
+#define AR_GPIO_IN 0x404c
+#define AR9300_GPIO_IN_VAL 0x0001FFFF
+#define AR9300_GPIO_IN_VAL_S 0
+
#define AR_GPIO_OE_OUT (AR_SREV_9300_20_OR_LATER(ah) ? 0x4050 : 0x404c)
#define AR_GPIO_OE_OUT_DRV 0x3
#define AR_GPIO_OE_OUT_DRV_NO 0x0
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index f2ade24..aff0478 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1120,7 +1120,7 @@
}
}
-void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
+bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
@@ -1128,7 +1128,7 @@
int i, npend = 0;
if (sc->sc_flags & SC_OP_INVALID)
- return;
+ return true;
/* Stop beacon queue */
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
@@ -1142,25 +1142,15 @@
}
}
- if (npend) {
- int r;
-
- ath_print(common, ATH_DBG_FATAL,
- "Failed to stop TX DMA. Resetting hardware!\n");
-
- spin_lock_bh(&sc->sc_resetlock);
- r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
- if (r)
- ath_print(common, ATH_DBG_FATAL,
- "Unable to reset hardware; reset status %d\n",
- r);
- spin_unlock_bh(&sc->sc_resetlock);
- }
+ if (npend)
+ ath_print(common, ATH_DBG_FATAL, "Failed to stop TX DMA!\n");
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (ATH_TXQ_SETUP(sc, i))
ath_draintxq(sc, &sc->tx.txq[i], retry_tx);
}
+
+ return !npend;
}
void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq)
diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c
index ae6c006..546b4e4 100644
--- a/drivers/net/wireless/ath/carl9170/fw.c
+++ b/drivers/net/wireless/ath/carl9170/fw.c
@@ -291,7 +291,8 @@
if (SUPP(CARL9170FW_WLANTX_CAB)) {
ar->hw->wiphy->interface_modes |=
- BIT(NL80211_IFTYPE_AP);
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_GO);
}
}
diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c
index a314c2c..dc7b30b 100644
--- a/drivers/net/wireless/ath/carl9170/main.c
+++ b/drivers/net/wireless/ath/carl9170/main.c
@@ -1631,7 +1631,8 @@
* supports these modes. The code which will add the
* additional interface_modes is in fw.c.
*/
- hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT);
hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c
index b575c86..7e6506a 100644
--- a/drivers/net/wireless/ath/carl9170/tx.c
+++ b/drivers/net/wireless/ath/carl9170/tx.c
@@ -810,7 +810,7 @@
mac_tmp = cpu_to_le16(AR9170_TX_MAC_HW_DURATION |
AR9170_TX_MAC_BACKOFF);
- mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) &&
+ mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) &
AR9170_TX_MAC_QOS);
no_ack = !!(info->flags & IEEE80211_TX_CTL_NO_ACK);
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index e5685dc..b4de0ca 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -1170,7 +1170,6 @@
lbs_deb_sdio("call remove card\n");
lbs_stop_card(card->priv);
lbs_remove_card(card->priv);
- card->priv->surpriseremoved = 1;
flush_workqueue(card->workqueue);
destroy_workqueue(card->workqueue);
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 79bcb4e5..ecd4d04 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -1055,7 +1055,6 @@
lbs_stop_card(priv);
lbs_remove_card(priv); /* will call free_netdev */
- priv->surpriseremoved = 1;
free_irq(spi->irq, card);
if_spi_terminate_spi_thread(card);
if (card->pdata->teardown)
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 46b88b1..fcd1bbf 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -915,8 +915,6 @@
lbs_free_adapter(priv);
lbs_cfg_free(priv);
-
- priv->dev = NULL;
free_netdev(dev);
lbs_deb_leave(LBS_DEB_MAIN);
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index e8e2d0f..f3d396e 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -1392,10 +1392,9 @@
orinoco_add_hostscan_results(priv, buf, len);
kfree(buf);
- } else if (priv->scan_request) {
+ } else {
/* Either abort or complete the scan */
- cfg80211_scan_done(priv->scan_request, (len < 0));
- priv->scan_request = NULL;
+ orinoco_scan_done(priv, (len < 0));
}
spin_lock_irqsave(&priv->scan_lock, flags);
@@ -1684,6 +1683,8 @@
hermes_write_regn(hw, EVACK, 0xffff);
}
+ orinoco_scan_done(priv, true);
+
/* firmware will have to reassociate */
netif_carrier_off(dev);
priv->last_linkstatus = 0xffff;
@@ -1762,10 +1763,7 @@
orinoco_unlock(priv, &flags);
/* Scanning support: Notify scan cancellation */
- if (priv->scan_request) {
- cfg80211_scan_done(priv->scan_request, 1);
- priv->scan_request = NULL;
- }
+ orinoco_scan_done(priv, true);
if (priv->hard_reset) {
err = (*priv->hard_reset)(priv);
@@ -1813,6 +1811,12 @@
struct net_device *dev = priv->ndev;
int err = 0;
+ /* If we've called commit, we are reconfiguring or bringing the
+ * interface up. Maintaining countermeasures across this would
+ * be confusing, so note that we've disabled them. The port will
+ * be enabled later in orinoco_commit or __orinoco_up. */
+ priv->tkip_cm_active = 0;
+
err = orinoco_hw_program_rids(priv);
/* FIXME: what about netif_tx_lock */
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 71b3d68..32954c4 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -151,20 +151,20 @@
goto failed;
}
- ret = pcmcia_request_irq(link, orinoco_interrupt);
- if (ret)
- goto failed;
-
- /* We initialize the hermes structure before completing PCMCIA
- * configuration just in case the interrupt handler gets
- * called. */
mem = ioport_map(link->resource[0]->start,
resource_size(link->resource[0]));
if (!mem)
goto failed;
+ /* We initialize the hermes structure before completing PCMCIA
+ * configuration just in case the interrupt handler gets
+ * called. */
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
+ ret = pcmcia_request_irq(link, orinoco_interrupt);
+ if (ret)
+ goto failed;
+
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/wireless/orinoco/scan.c b/drivers/net/wireless/orinoco/scan.c
index 4300d9d..86cb54c 100644
--- a/drivers/net/wireless/orinoco/scan.c
+++ b/drivers/net/wireless/orinoco/scan.c
@@ -229,3 +229,11 @@
priv->scan_request = NULL;
}
}
+
+void orinoco_scan_done(struct orinoco_private *priv, bool abort)
+{
+ if (priv->scan_request) {
+ cfg80211_scan_done(priv->scan_request, abort);
+ priv->scan_request = NULL;
+ }
+}
diff --git a/drivers/net/wireless/orinoco/scan.h b/drivers/net/wireless/orinoco/scan.h
index 2dc4e04..27281fb 100644
--- a/drivers/net/wireless/orinoco/scan.h
+++ b/drivers/net/wireless/orinoco/scan.h
@@ -16,5 +16,6 @@
void orinoco_add_hostscan_results(struct orinoco_private *dev,
unsigned char *buf,
size_t len);
+void orinoco_scan_done(struct orinoco_private *priv, bool abort);
#endif /* _ORINOCO_SCAN_H_ */
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index fb859a5..db34c28 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -214,21 +214,21 @@
goto failed;
}
- ret = pcmcia_request_irq(link, orinoco_interrupt);
- if (ret)
- goto failed;
-
- /* We initialize the hermes structure before completing PCMCIA
- * configuration just in case the interrupt handler gets
- * called. */
mem = ioport_map(link->resource[0]->start,
resource_size(link->resource[0]));
if (!mem)
goto failed;
+ /* We initialize the hermes structure before completing PCMCIA
+ * configuration just in case the interrupt handler gets
+ * called. */
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
hw->eeprom_pda = true;
+ ret = pcmcia_request_irq(link, orinoco_interrupt);
+ if (ret)
+ goto failed;
+
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c
index 93505f9..e5afabe 100644
--- a/drivers/net/wireless/orinoco/wext.c
+++ b/drivers/net/wireless/orinoco/wext.c
@@ -911,10 +911,10 @@
*/
if (param->value) {
priv->tkip_cm_active = 1;
- ret = hermes_enable_port(hw, 0);
+ ret = hermes_disable_port(hw, 0);
} else {
priv->tkip_cm_active = 0;
- ret = hermes_disable_port(hw, 0);
+ ret = hermes_enable_port(hw, 0);
}
break;
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 458bb57..cdbeec9 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -66,8 +66,8 @@
#define GRANT_INVALID_REF 0
-#define NET_TX_RING_SIZE __RING_SIZE((struct xen_netif_tx_sring *)0, PAGE_SIZE)
-#define NET_RX_RING_SIZE __RING_SIZE((struct xen_netif_rx_sring *)0, PAGE_SIZE)
+#define NET_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE)
+#define NET_RX_RING_SIZE __CONST_RING_SIZE(xen_netif_rx, PAGE_SIZE)
#define TX_MAX_TARGET min_t(int, NET_RX_RING_SIZE, 256)
struct netfront_info {
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index c80a7a6..de886f3 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -215,7 +215,8 @@
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
|| MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
|| ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
- || MACH_VPAC270 || MACH_BALLOON3)
+ || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
+ || MACH_COLIBRI320)
select PCMCIA_SOC_COMMON
help
Say Y here to include support for the PXA2xx PCMCIA controller
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 8d9386a..9a44a90 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -70,6 +70,8 @@
pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o
pxa2xx-obj-$(CONFIG_MACH_BALLOON3) += pxa2xx_balloon3.o
+pxa2xx-obj-$(CONFIG_MACH_COLIBRI) += pxa2xx_colibri.o
+pxa2xx-obj-$(CONFIG_MACH_COLIBRI320) += pxa2xx_colibri.o
obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y)
diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c
index dbbdd00..453c54c 100644
--- a/drivers/pcmcia/pxa2xx_balloon3.c
+++ b/drivers/pcmcia/pxa2xx_balloon3.c
@@ -39,12 +39,10 @@
static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
uint16_t ver;
- int ret;
- static void __iomem *fpga_ver;
ver = __raw_readw(BALLOON3_FPGA_VER);
- if (ver > 0x0201)
- pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+ if (ver < 0x4f08)
+ pr_warn("The FPGA code, version 0x%04x, is too old. "
"PCMCIA/CF support might be broken in this version!",
ver);
@@ -97,8 +95,9 @@
static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
- __raw_writew((state->flags & SS_RESET) ? BALLOON3_CF_RESET : 0,
- BALLOON3_CF_CONTROL_REG);
+ __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG |
+ ((state->flags & SS_RESET) ?
+ BALLOON3_FPGA_SETnCLR : 0));
return 0;
}
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index ae07b4d..3755e7c 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -26,6 +26,7 @@
#include <linux/platform_device.h>
#include <mach/hardware.h>
+#include <mach/smemc.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
@@ -116,37 +117,49 @@
static int pxa2xx_pcmcia_set_mcmem( int sock, int speed, int clock )
{
- MCMEM(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+ uint32_t val;
+
+ val = ((pxa2xx_mcxx_setup(speed, clock)
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
| ((pxa2xx_mcxx_asst(speed, clock)
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
| ((pxa2xx_mcxx_hold(speed, clock)
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
+ __raw_writel(val, MCMEM(sock));
+
return 0;
}
static int pxa2xx_pcmcia_set_mcio( int sock, int speed, int clock )
{
- MCIO(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+ uint32_t val;
+
+ val = ((pxa2xx_mcxx_setup(speed, clock)
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
| ((pxa2xx_mcxx_asst(speed, clock)
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
| ((pxa2xx_mcxx_hold(speed, clock)
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
+ __raw_writel(val, MCIO(sock));
+
return 0;
}
static int pxa2xx_pcmcia_set_mcatt( int sock, int speed, int clock )
{
- MCATT(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+ uint32_t val;
+
+ val = ((pxa2xx_mcxx_setup(speed, clock)
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
| ((pxa2xx_mcxx_asst(speed, clock)
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
| ((pxa2xx_mcxx_hold(speed, clock)
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
+ __raw_writel(val, MCATT(sock));
+
return 0;
}
@@ -166,8 +179,8 @@
static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
{
- unsigned int clk = get_memclk_frequency_10khz();
- return pxa2xx_pcmcia_set_mcxx(skt, clk);
+ unsigned long clk = clk_get_rate(skt->clk);
+ return pxa2xx_pcmcia_set_mcxx(skt, clk / 10000);
}
#ifdef CONFIG_CPU_FREQ
@@ -205,19 +218,18 @@
static void pxa2xx_configure_sockets(struct device *dev)
{
struct pcmcia_low_level *ops = dev->platform_data;
-
/*
* We have at least one socket, so set MECR:CIT
* (Card Is There)
*/
- MECR |= MECR_CIT;
+ uint32_t mecr = MECR_CIT;
/* Set MECR:NOS (Number Of Sockets) */
if ((ops->first + ops->nr) > 1 ||
machine_is_viper() || machine_is_arcom_zeus())
- MECR |= MECR_NOS;
- else
- MECR &= ~MECR_NOS;
+ mecr |= MECR_NOS;
+
+ __raw_writel(mecr, MECR);
}
static const char *skt_names[] = {
@@ -270,24 +282,41 @@
struct pcmcia_low_level *ops;
struct skt_dev_info *sinfo;
struct soc_pcmcia_socket *skt;
+ struct clk *clk;
ops = (struct pcmcia_low_level *)dev->dev.platform_data;
- if (!ops)
+ if (!ops) {
+ ret = -ENODEV;
+ goto err0;
+ }
+
+ if (cpu_is_pxa320() && ops->nr > 1) {
+ dev_err(&dev->dev, "pxa320 supports only one pcmcia slot");
+ ret = -EINVAL;
+ goto err0;
+ }
+
+ clk = clk_get(&dev->dev, NULL);
+ if (!clk)
return -ENODEV;
pxa2xx_drv_pcmcia_ops(ops);
sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
- if (!sinfo)
+ if (!sinfo) {
+ clk_put(clk);
return -ENOMEM;
+ }
sinfo->nskt = ops->nr;
+ sinfo->clk = clk;
/* Initialize processor specific parameters */
for (i = 0; i < ops->nr; i++) {
skt = &sinfo->skt[i];
skt->nr = ops->first + i;
+ skt->clk = clk;
skt->ops = ops;
skt->socket.owner = ops->owner;
skt->socket.dev.parent = &dev->dev;
@@ -295,18 +324,26 @@
ret = pxa2xx_drv_pcmcia_add_one(skt);
if (ret)
- break;
+ goto err1;
}
if (ret) {
while (--i >= 0)
soc_pcmcia_remove_one(&sinfo->skt[i]);
kfree(sinfo);
+ clk_put(clk);
} else {
pxa2xx_configure_sockets(&dev->dev);
dev_set_drvdata(&dev->dev, sinfo);
}
+ return 0;
+
+err1:
+ while (--i >= 0)
+ soc_pcmcia_remove_one(&sinfo->skt[i]);
+ kfree(sinfo);
+err0:
return ret;
}
@@ -320,6 +357,7 @@
for (i = 0; i < sinfo->nskt; i++)
soc_pcmcia_remove_one(&sinfo->skt[i]);
+ clk_put(sinfo->clk);
kfree(sinfo);
return 0;
}
diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
new file mode 100644
index 0000000..c3f7219
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_colibri.c
@@ -0,0 +1,229 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_colibri.c
+ *
+ * Driver for Toradex Colibri PXA270 CF socket
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+
+#include "soc_common.h"
+
+#define COLIBRI270_RESET_GPIO 53
+#define COLIBRI270_PPEN_GPIO 107
+#define COLIBRI270_BVD1_GPIO 83
+#define COLIBRI270_BVD2_GPIO 82
+#define COLIBRI270_DETECT_GPIO 84
+#define COLIBRI270_READY_GPIO 1
+
+#define COLIBRI320_RESET_GPIO 77
+#define COLIBRI320_PPEN_GPIO 57
+#define COLIBRI320_BVD1_GPIO 53
+#define COLIBRI320_BVD2_GPIO 79
+#define COLIBRI320_DETECT_GPIO 81
+#define COLIBRI320_READY_GPIO 29
+
+static struct {
+ int reset_gpio;
+ int ppen_gpio;
+ int bvd1_gpio;
+ int bvd2_gpio;
+ int detect_gpio;
+ int ready_gpio;
+} colibri_pcmcia_gpio;
+
+static struct pcmcia_irqs colibri_irqs[] = {
+ {
+ .sock = 0,
+ .str = "PCMCIA CD"
+ },
+};
+
+static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ int ret;
+
+ ret = gpio_request(colibri_pcmcia_gpio.detect_gpio, "DETECT");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(colibri_pcmcia_gpio.detect_gpio);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(colibri_pcmcia_gpio.ready_gpio, "READY");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_input(colibri_pcmcia_gpio.ready_gpio);
+ if (ret)
+ goto err3;
+
+ ret = gpio_request(colibri_pcmcia_gpio.bvd1_gpio, "BVD1");
+ if (ret)
+ goto err3;
+ ret = gpio_direction_input(colibri_pcmcia_gpio.bvd1_gpio);
+ if (ret)
+ goto err4;
+
+ ret = gpio_request(colibri_pcmcia_gpio.bvd2_gpio, "BVD2");
+ if (ret)
+ goto err4;
+ ret = gpio_direction_input(colibri_pcmcia_gpio.bvd2_gpio);
+ if (ret)
+ goto err5;
+
+ ret = gpio_request(colibri_pcmcia_gpio.ppen_gpio, "PPEN");
+ if (ret)
+ goto err5;
+ ret = gpio_direction_output(colibri_pcmcia_gpio.ppen_gpio, 0);
+ if (ret)
+ goto err6;
+
+ ret = gpio_request(colibri_pcmcia_gpio.reset_gpio, "RESET");
+ if (ret)
+ goto err6;
+ ret = gpio_direction_output(colibri_pcmcia_gpio.reset_gpio, 1);
+ if (ret)
+ goto err7;
+
+ colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpio.detect_gpio);
+ skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpio.ready_gpio);
+
+ return soc_pcmcia_request_irqs(skt, colibri_irqs,
+ ARRAY_SIZE(colibri_irqs));
+
+err7:
+ gpio_free(colibri_pcmcia_gpio.detect_gpio);
+err6:
+ gpio_free(colibri_pcmcia_gpio.ready_gpio);
+err5:
+ gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
+err4:
+ gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
+err3:
+ gpio_free(colibri_pcmcia_gpio.reset_gpio);
+err2:
+ gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+err1:
+ return ret;
+}
+
+static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ gpio_free(colibri_pcmcia_gpio.detect_gpio);
+ gpio_free(colibri_pcmcia_gpio.ready_gpio);
+ gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
+ gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
+ gpio_free(colibri_pcmcia_gpio.reset_gpio);
+ gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+}
+
+static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+
+ state->detect = !!gpio_get_value(colibri_pcmcia_gpio.detect_gpio);
+ state->ready = !!gpio_get_value(colibri_pcmcia_gpio.ready_gpio);
+ state->bvd1 = !!gpio_get_value(colibri_pcmcia_gpio.bvd1_gpio);
+ state->bvd2 = !!gpio_get_value(colibri_pcmcia_gpio.bvd2_gpio);
+ state->wrprot = 0;
+ state->vs_3v = 1;
+ state->vs_Xv = 0;
+}
+
+static int
+colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ gpio_set_value(colibri_pcmcia_gpio.ppen_gpio,
+ !(state->Vcc == 33 && state->Vpp < 50));
+ gpio_set_value(colibri_pcmcia_gpio.reset_gpio, state->flags & SS_RESET);
+ return 0;
+}
+
+static void colibri_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void colibri_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level colibri_pcmcia_ops = {
+ .owner = THIS_MODULE,
+
+ .first = 0,
+ .nr = 1,
+
+ .hw_init = colibri_pcmcia_hw_init,
+ .hw_shutdown = colibri_pcmcia_hw_shutdown,
+
+ .socket_state = colibri_pcmcia_socket_state,
+ .configure_socket = colibri_pcmcia_configure_socket,
+
+ .socket_init = colibri_pcmcia_socket_init,
+ .socket_suspend = colibri_pcmcia_socket_suspend,
+};
+
+static struct platform_device *colibri_pcmcia_device;
+
+static int __init colibri_pcmcia_init(void)
+{
+ int ret;
+
+ colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!colibri_pcmcia_device)
+ return -ENOMEM;
+
+ /* Colibri PXA270 */
+ if (machine_is_colibri()) {
+ colibri_pcmcia_gpio.reset_gpio = COLIBRI270_RESET_GPIO;
+ colibri_pcmcia_gpio.ppen_gpio = COLIBRI270_PPEN_GPIO;
+ colibri_pcmcia_gpio.bvd1_gpio = COLIBRI270_BVD1_GPIO;
+ colibri_pcmcia_gpio.bvd2_gpio = COLIBRI270_BVD2_GPIO;
+ colibri_pcmcia_gpio.detect_gpio = COLIBRI270_DETECT_GPIO;
+ colibri_pcmcia_gpio.ready_gpio = COLIBRI270_READY_GPIO;
+ /* Colibri PXA320 */
+ } else if (machine_is_colibri320()) {
+ colibri_pcmcia_gpio.reset_gpio = COLIBRI320_RESET_GPIO;
+ colibri_pcmcia_gpio.ppen_gpio = COLIBRI320_PPEN_GPIO;
+ colibri_pcmcia_gpio.bvd1_gpio = COLIBRI320_BVD1_GPIO;
+ colibri_pcmcia_gpio.bvd2_gpio = COLIBRI320_BVD2_GPIO;
+ colibri_pcmcia_gpio.detect_gpio = COLIBRI320_DETECT_GPIO;
+ colibri_pcmcia_gpio.ready_gpio = COLIBRI320_READY_GPIO;
+ }
+
+ ret = platform_device_add_data(colibri_pcmcia_device,
+ &colibri_pcmcia_ops, sizeof(colibri_pcmcia_ops));
+
+ if (!ret)
+ ret = platform_device_add(colibri_pcmcia_device);
+
+ if (ret)
+ platform_device_put(colibri_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit colibri_pcmcia_exit(void)
+{
+ platform_device_unregister(colibri_pcmcia_device);
+}
+
+module_init(colibri_pcmcia_init);
+module_exit(colibri_pcmcia_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270/PXA320");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index bbcd538..9daa736 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -10,6 +10,7 @@
#define _ASM_ARCH_PCMCIA
/* include the world */
+#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <pcmcia/ss.h>
#include <pcmcia/cistpl.h>
@@ -29,6 +30,7 @@
* Info from low level handler
*/
unsigned int nr;
+ struct clk *clk;
/*
* Core PCMCIA state
@@ -56,6 +58,7 @@
struct skt_dev_info {
int nskt;
+ struct clk *clk;
struct soc_pcmcia_socket skt[0];
};
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 60a5a5c..d235f44 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -81,6 +81,8 @@
static int wlan_status = 1;
static int bluetooth_status = 1;
+static int wimax_status = -1;
+static int wwan_status = -1;
module_param(wlan_status, int, 0444);
MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot "
@@ -92,6 +94,16 @@
"(0 = disabled, 1 = enabled, -1 = don't do anything). "
"default is 1");
+module_param(wimax_status, int, 0444);
+MODULE_PARM_DESC(wimax_status, "Set the wireless status on boot "
+ "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+ "default is 1");
+
+module_param(wwan_status, int, 0444);
+MODULE_PARM_DESC(wwan_status, "Set the wireless status on boot "
+ "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+ "default is 1");
+
/*
* Some events we use, same for all Asus
*/
@@ -114,6 +126,8 @@
*/
#define WL_RSTS 0x01 /* internal Wifi */
#define BT_RSTS 0x02 /* internal Bluetooth */
+#define WM_RSTS 0x08 /* internal wimax */
+#define WW_RSTS 0x20 /* internal wwan */
/* LED */
#define METHOD_MLED "MLED"
@@ -132,6 +146,11 @@
*/
#define METHOD_WLAN "WLED"
#define METHOD_BLUETOOTH "BLED"
+
+/* WWAN and WIMAX */
+#define METHOD_WWAN "GSMC"
+#define METHOD_WIMAX "WMXC"
+
#define METHOD_WL_STATUS "RSTS"
/* Brightness */
@@ -883,6 +902,64 @@
}
/*
+ * Wimax
+ */
+static int asus_wimax_set(struct asus_laptop *asus, int status)
+{
+ if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) {
+ pr_warning("Error setting wimax status to %d", status);
+ return -EIO;
+ }
+ return 0;
+}
+
+static ssize_t show_wimax(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", asus_wireless_status(asus, WM_RSTS));
+}
+
+static ssize_t store_wimax(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sysfs_acpi_set(asus, buf, count, METHOD_WIMAX);
+}
+
+/*
+ * Wwan
+ */
+static int asus_wwan_set(struct asus_laptop *asus, int status)
+{
+ if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) {
+ pr_warning("Error setting wwan status to %d", status);
+ return -EIO;
+ }
+ return 0;
+}
+
+static ssize_t show_wwan(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", asus_wireless_status(asus, WW_RSTS));
+}
+
+static ssize_t store_wwan(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sysfs_acpi_set(asus, buf, count, METHOD_WWAN);
+}
+
+/*
* Display
*/
static void asus_set_display(struct asus_laptop *asus, int value)
@@ -1202,6 +1279,8 @@
static DEVICE_ATTR(wlan, S_IRUGO | S_IWUSR, show_wlan, store_wlan);
static DEVICE_ATTR(bluetooth, S_IRUGO | S_IWUSR,
show_bluetooth, store_bluetooth);
+static DEVICE_ATTR(wimax, S_IRUGO | S_IWUSR, show_wimax, store_wimax);
+static DEVICE_ATTR(wwan, S_IRUGO | S_IWUSR, show_wwan, store_wwan);
static DEVICE_ATTR(display, S_IRUGO | S_IWUSR, show_disp, store_disp);
static DEVICE_ATTR(ledd, S_IRUGO | S_IWUSR, show_ledd, store_ledd);
static DEVICE_ATTR(ls_level, S_IRUGO | S_IWUSR, show_lslvl, store_lslvl);
@@ -1212,6 +1291,8 @@
&dev_attr_infos.attr,
&dev_attr_wlan.attr,
&dev_attr_bluetooth.attr,
+ &dev_attr_wimax.attr,
+ &dev_attr_wwan.attr,
&dev_attr_display.attr,
&dev_attr_ledd.attr,
&dev_attr_ls_level.attr,
@@ -1239,6 +1320,13 @@
} else if (attr == &dev_attr_display.attr) {
supported = !acpi_check_handle(handle, METHOD_SWITCH_DISPLAY, NULL);
+ } else if (attr == &dev_attr_wimax.attr) {
+ supported =
+ !acpi_check_handle(asus->handle, METHOD_WIMAX, NULL);
+
+ } else if (attr == &dev_attr_wwan.attr) {
+ supported = !acpi_check_handle(asus->handle, METHOD_WWAN, NULL);
+
} else if (attr == &dev_attr_ledd.attr) {
supported = !acpi_check_handle(handle, METHOD_LEDD, NULL);
@@ -1397,7 +1485,8 @@
/*
* The HWRS method return informations about the hardware.
- * 0x80 bit is for WLAN, 0x100 for Bluetooth.
+ * 0x80 bit is for WLAN, 0x100 for Bluetooth,
+ * 0x40 for WWAN, 0x10 for WIMAX.
* The significance of others is yet to be found.
*/
status =
@@ -1440,6 +1529,12 @@
if (wlan_status >= 0)
asus_wlan_set(asus, !!wlan_status);
+ if (wimax_status >= 0)
+ asus_wimax_set(asus, !!wimax_status);
+
+ if (wwan_status >= 0)
+ asus_wwan_set(asus, !!wwan_status);
+
/* Keyboard Backlight is on by default */
if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL))
asus_kled_set(asus, 1);
diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c
index 462ceab..0d50fbb 100644
--- a/drivers/platform/x86/eeepc-wmi.c
+++ b/drivers/platform/x86/eeepc-wmi.c
@@ -298,8 +298,8 @@
kfree(obj);
}
-static int store_cpufv(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t store_cpufv(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
int value;
struct acpi_buffer input = { (acpi_size)sizeof(value), &value };
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 1dac659..9e05af9 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -172,6 +172,8 @@
bios_return = *((struct bios_return *)obj->buffer.pointer);
memcpy(buffer, &bios_return.value, sizeof(bios_return.value));
+
+ kfree(obj);
return 0;
}
diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c
index 3c2c6b9..94a114a 100644
--- a/drivers/platform/x86/ibm_rtl.c
+++ b/drivers/platform/x86/ibm_rtl.c
@@ -28,6 +28,7 @@
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/dmi.h>
+#include <linux/efi.h>
#include <linux/mutex.h>
#include <asm/bios_ebda.h>
@@ -220,32 +221,13 @@
sysdev_class_unregister(&class_rtl);
}
-static int dmi_check_cb(const struct dmi_system_id *id)
-{
- RTL_DEBUG("found IBM server '%s'\n", id->ident);
- return 0;
-}
-
-#define ibm_dmi_entry(NAME, TYPE) \
-{ \
- .ident = NAME, \
- .matches = { \
- DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \
- DMI_MATCH(DMI_PRODUCT_NAME, TYPE), \
- }, \
- .callback = dmi_check_cb \
-}
static struct dmi_system_id __initdata ibm_rtl_dmi_table[] = {
- ibm_dmi_entry("BladeCenter LS21", "7971"),
- ibm_dmi_entry("BladeCenter LS22", "7901"),
- ibm_dmi_entry("BladeCenter HS21 XM", "7995"),
- ibm_dmi_entry("BladeCenter HS22", "7870"),
- ibm_dmi_entry("BladeCenter HS22V", "7871"),
- ibm_dmi_entry("System x3550 M2", "7946"),
- ibm_dmi_entry("System x3650 M2", "7947"),
- ibm_dmi_entry("System x3550 M3", "7944"),
- ibm_dmi_entry("System x3650 M3", "7945"),
+ { \
+ .matches = { \
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \
+ }, \
+ },
{ }
};
@@ -257,7 +239,7 @@
if (force)
pr_warning("ibm-rtl: module loaded by force\n");
/* first ensure that we are running on IBM HW */
- else if (!dmi_check_system(ibm_rtl_dmi_table))
+ else if (efi_enabled || !dmi_check_system(ibm_rtl_dmi_table))
return -ENODEV;
/* Get the address for the Extended BIOS Data Area */
@@ -302,7 +284,7 @@
RTL_DEBUG("rtl_cmd_width = %u, rtl_cmd_type = %u\n",
rtl_cmd_width, rtl_cmd_type);
addr = ioread32(&rtl_table->cmd_port_address);
- RTL_DEBUG("addr = %#llx\n", addr);
+ RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr);
plen = rtl_cmd_width/sizeof(char);
rtl_cmd_addr = rtl_port_map(addr, plen);
RTL_DEBUG("rtl_cmd_addr = %#llx\n", (u64)rtl_cmd_addr);
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index 42a5469..35278ad 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -43,16 +43,18 @@
#define dprintk(msg...) pr_debug(DRV_PFX msg)
-#define KEYCODE_BASE 0xD0
-#define MSI_WMI_BRIGHTNESSUP KEYCODE_BASE
-#define MSI_WMI_BRIGHTNESSDOWN (KEYCODE_BASE + 1)
-#define MSI_WMI_VOLUMEUP (KEYCODE_BASE + 2)
-#define MSI_WMI_VOLUMEDOWN (KEYCODE_BASE + 3)
+#define SCANCODE_BASE 0xD0
+#define MSI_WMI_BRIGHTNESSUP SCANCODE_BASE
+#define MSI_WMI_BRIGHTNESSDOWN (SCANCODE_BASE + 1)
+#define MSI_WMI_VOLUMEUP (SCANCODE_BASE + 2)
+#define MSI_WMI_VOLUMEDOWN (SCANCODE_BASE + 3)
+#define MSI_WMI_MUTE (SCANCODE_BASE + 4)
static struct key_entry msi_wmi_keymap[] = {
{ KE_KEY, MSI_WMI_BRIGHTNESSUP, {KEY_BRIGHTNESSUP} },
{ KE_KEY, MSI_WMI_BRIGHTNESSDOWN, {KEY_BRIGHTNESSDOWN} },
{ KE_KEY, MSI_WMI_VOLUMEUP, {KEY_VOLUMEUP} },
{ KE_KEY, MSI_WMI_VOLUMEDOWN, {KEY_VOLUMEDOWN} },
+ { KE_KEY, MSI_WMI_MUTE, {KEY_MUTE} },
{ KE_END, 0}
};
static ktime_t last_pressed[ARRAY_SIZE(msi_wmi_keymap) - 1];
@@ -169,7 +171,7 @@
ktime_t diff;
cur = ktime_get_real();
diff = ktime_sub(cur, last_pressed[key->code -
- KEYCODE_BASE]);
+ SCANCODE_BASE]);
/* Ignore event if the same event happened in a 50 ms
timeframe -> Key press may result in 10-20 GPEs */
if (ktime_to_us(diff) < 1000 * 50) {
@@ -178,7 +180,7 @@
key->code, ktime_to_us(diff));
return;
}
- last_pressed[key->code - KEYCODE_BASE] = cur;
+ last_pressed[key->code - SCANCODE_BASE] = cur;
if (key->type == KE_KEY &&
/* Brightness is served via acpi video driver */
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 2d61186..e8c2199 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -8497,7 +8497,6 @@
ibm->acpi->type,
dispatch_acpi_notify);
ibm->flags.acpi_notify_installed = 0;
- ibm->flags.acpi_notify_installed = 0;
}
if (ibm->flags.proc_created) {
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 06f304f..4276da7 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -135,6 +135,7 @@
{ KE_KEY, 0x141, { KEY_BRIGHTNESSUP } },
{ KE_KEY, 0x142, { KEY_WLAN } },
{ KE_KEY, 0x143, { KEY_PROG1 } },
+ { KE_KEY, 0x17f, { KEY_FN } },
{ KE_KEY, 0xb05, { KEY_PROG2 } },
{ KE_KEY, 0xb06, { KEY_WWW } },
{ KE_KEY, 0xb07, { KEY_MAIL } },
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 104b77c..aecd9a9 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -755,7 +755,7 @@
struct wmi_block *wblock;
list_for_each_entry(wblock, &wmi_block_list, list)
- if (strncmp(wblock->gblock.guid, guid_string, 16) == 0)
+ if (memcmp(wblock->gblock.guid, guid_string, 16) == 0)
return true;
return false;
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index 2d73dfc..57313f4 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -180,7 +180,7 @@
};
EXPORT_SYMBOL(pnpacpi_protocol);
-static char *pnpacpi_get_id(struct acpi_device *device)
+static char *__init pnpacpi_get_id(struct acpi_device *device)
{
struct acpi_hardware_id *id;
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index 51237fb..6d20b04 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -231,8 +231,7 @@
};
#define TPS6586X_REGULATOR(_id, vdata, _ops, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
-{ \
+ ereg0, ebit0, ereg1, ebit1) \
.desc = { \
.name = "REG-" #_id, \
.ops = &tps6586x_regulator_##_ops, \
@@ -248,18 +247,26 @@
.enable_bit[0] = (ebit0), \
.enable_reg[1] = TPS6586X_SUPPLY##ereg1, \
.enable_bit[1] = (ebit1), \
- .voltages = tps6586x_##vdata##_voltages, \
-}
+ .voltages = tps6586x_##vdata##_voltages,
+
+#define TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
+ .go_reg = TPS6586X_##goreg, \
+ .go_bit = (gobit),
#define TPS6586X_LDO(_id, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
+{ \
TPS6586X_REGULATOR(_id, vdata, ldo_ops, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1, 0, 0)
+ ereg0, ebit0, ereg1, ebit1) \
+}
#define TPS6586X_DVM(_id, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
+{ \
TPS6586X_REGULATOR(_id, vdata, dvm_ops, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1, goreg, gobit)
+ ereg0, ebit0, ereg1, ebit1) \
+ TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
+}
static struct tps6586x_regulator tps6586x_regulator[] = {
TPS6586X_LDO(LDO_0, ldo, SUPPLYV1, 5, 3, ENC, 0, END, 0),
@@ -267,11 +274,11 @@
TPS6586X_LDO(LDO_5, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
TPS6586X_LDO(LDO_6, ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
TPS6586X_LDO(LDO_7, ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
- TPS6586X_LDO(LDO_8, ldo, SUPPLYV1, 5, 3, ENC, 6, END, 6),
+ TPS6586X_LDO(LDO_8, ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6),
TPS6586X_LDO(LDO_9, ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
- TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, ENE, 7, ENE, 7),
+ TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
TPS6586X_LDO(LDO_1, dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
- TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 1, END, 1),
+ TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
TPS6586X_DVM(LDO_2, dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6),
TPS6586X_DVM(LDO_4, ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6),
@@ -290,6 +297,10 @@
uint8_t val1, val2;
int ret;
+ if (ri->enable_reg[0] == ri->enable_reg[1] &&
+ ri->enable_bit[0] == ri->enable_bit[1])
+ return 0;
+
ret = tps6586x_read(parent, ri->enable_reg[0], &val1);
if (ret)
return ret;
@@ -298,14 +309,14 @@
if (ret)
return ret;
- if (!(val2 & ri->enable_bit[1]))
+ if (!(val2 & (1 << ri->enable_bit[1])))
return 0;
/*
* The regulator is on, but it's enabled with the bit we don't
* want to use, so we switch the enable bits
*/
- if (!(val1 & ri->enable_bit[0])) {
+ if (!(val1 & (1 << ri->enable_bit[0]))) {
ret = tps6586x_set_bits(parent, ri->enable_reg[0],
1 << ri->enable_bit[0]);
if (ret)
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index a5050e2..825951b 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -635,7 +635,7 @@
init_subchannel_id(&mchk_schid);
mchk_schid.sch_no = crw0->rsid;
if (crw1)
- mchk_schid.ssid = (crw1->rsid >> 8) & 3;
+ mchk_schid.ssid = (crw1->rsid >> 4) & 3;
/*
* Since we are always presented with IPI in the CRW, we have to
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index d37c733..0bcd580 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -156,6 +156,8 @@
if (!(a_status & ZFCP_STATUS_COMMON_RUNNING) ||
a_status & ZFCP_STATUS_COMMON_ERP_FAILED)
return 0;
+ if (p_status & ZFCP_STATUS_COMMON_NOESC)
+ return need;
if (!(a_status & ZFCP_STATUS_COMMON_UNBLOCKED))
need = ZFCP_ERP_ACTION_REOPEN_ADAPTER;
/* fall through */
@@ -188,6 +190,9 @@
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE,
&zfcp_sdev->status);
erp_action = &zfcp_sdev->erp_action;
+ memset(erp_action, 0, sizeof(struct zfcp_erp_action));
+ erp_action->port = port;
+ erp_action->sdev = sdev;
if (!(atomic_read(&zfcp_sdev->status) &
ZFCP_STATUS_COMMON_RUNNING))
act_status |= ZFCP_STATUS_ERP_CLOSE_ONLY;
@@ -200,6 +205,8 @@
zfcp_erp_action_dismiss_port(port);
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &port->status);
erp_action = &port->erp_action;
+ memset(erp_action, 0, sizeof(struct zfcp_erp_action));
+ erp_action->port = port;
if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_RUNNING))
act_status |= ZFCP_STATUS_ERP_CLOSE_ONLY;
break;
@@ -209,6 +216,7 @@
zfcp_erp_action_dismiss_adapter(adapter);
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &adapter->status);
erp_action = &adapter->erp_action;
+ memset(erp_action, 0, sizeof(struct zfcp_erp_action));
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING))
act_status |= ZFCP_STATUS_ERP_CLOSE_ONLY;
@@ -218,10 +226,7 @@
return NULL;
}
- memset(erp_action, 0, sizeof(struct zfcp_erp_action));
erp_action->adapter = adapter;
- erp_action->port = port;
- erp_action->sdev = sdev;
erp_action->action = need;
erp_action->status = act_status;
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index be03174..2eb7dd5 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -851,7 +851,7 @@
zfcp_qdio_set_sbale_last(qdio, &req->qdio_req);
- req->data = zfcp_sdev;
+ req->data = sdev;
req->handler = zfcp_fsf_abort_fcp_command_handler;
req->qtcb->header.lun_handle = zfcp_sdev->lun_handle;
req->qtcb->header.port_handle = zfcp_sdev->port->handle;
@@ -2069,8 +2069,6 @@
struct fcp_resp_with_ext *fcp_rsp;
unsigned long flags;
- zfcp_fsf_fcp_handler_common(req);
-
read_lock_irqsave(&req->adapter->abort_lock, flags);
scpnt = req->data;
@@ -2079,6 +2077,8 @@
return;
}
+ zfcp_fsf_fcp_handler_common(req);
+
if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
set_host_byte(scpnt, DID_TRANSPORT_DISRUPTED);
goto skip_fsfstatus;
@@ -2170,12 +2170,13 @@
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
struct zfcp_qdio *qdio = adapter->qdio;
struct fsf_qtcb_bottom_io *io;
+ unsigned long flags;
if (unlikely(!(atomic_read(&zfcp_sdev->status) &
ZFCP_STATUS_COMMON_UNBLOCKED)))
return -EBUSY;
- spin_lock(&qdio->req_q_lock);
+ spin_lock_irqsave(&qdio->req_q_lock, flags);
if (atomic_read(&qdio->req_q_free) <= 0) {
atomic_inc(&qdio->req_q_full);
goto out;
@@ -2239,7 +2240,7 @@
zfcp_fsf_req_free(req);
scsi_cmnd->host_scribble = NULL;
out:
- spin_unlock(&qdio->req_q_lock);
+ spin_unlock_irqrestore(&qdio->req_q_lock, flags);
return retval;
}
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 6bd2dbc..63529ed 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -76,8 +76,8 @@
scpnt->scsi_done(scpnt);
}
-static int zfcp_scsi_queuecommand_lck(struct scsi_cmnd *scpnt,
- void (*done) (struct scsi_cmnd *))
+static
+int zfcp_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scpnt)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(scpnt->device);
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
@@ -87,7 +87,6 @@
/* reset the status for this request */
scpnt->result = 0;
scpnt->host_scribble = NULL;
- scpnt->scsi_done = done;
scsi_result = fc_remote_port_chkready(rport);
if (unlikely(scsi_result)) {
@@ -127,8 +126,6 @@
return ret;
}
-static DEF_SCSI_QCMD(zfcp_scsi_queuecommand)
-
static int zfcp_scsi_slave_alloc(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index b2fb2b2..a6dea08 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -90,11 +90,7 @@
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3252},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3253},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3254},
-#define PCI_DEVICE_ID_HP_CISSF 0x333f
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x333F},
- {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
- {PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
};
@@ -113,8 +109,6 @@
{0x3249103C, "Smart Array P812", &SA5_access},
{0x324a103C, "Smart Array P712m", &SA5_access},
{0x324b103C, "Smart Array P711m", &SA5_access},
- {0x3233103C, "StorageWorks P1210m", &SA5_access},
- {0x333F103C, "StorageWorks P1210m", &SA5_access},
{0x3250103C, "Smart Array", &SA5_access},
{0x3250113C, "Smart Array", &SA5_access},
{0x3250123C, "Smart Array", &SA5_access},
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 0433ea6..b37c8a3 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -951,8 +951,8 @@
/* create a bio for continuation segment */
bio = bio_map_kern(req_q, or->cdb_cont.buff, or->cdb_cont.total_bytes,
GFP_KERNEL);
- if (unlikely(!bio))
- return -ENOMEM;
+ if (IS_ERR(bio))
+ return PTR_ERR(bio);
bio->bi_rw |= REQ_WRITE;
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 5e76a62..300d59f 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -62,6 +62,7 @@
static unsigned int pmcraid_debug_log;
static unsigned int pmcraid_disable_aen;
static unsigned int pmcraid_log_level = IOASC_LOG_LEVEL_MUST;
+static unsigned int pmcraid_enable_msix;
/*
* Data structures to support multiple adapters by the LLD.
@@ -4691,7 +4692,8 @@
int rc;
struct pci_dev *pdev = pinstance->pdev;
- if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
+ if ((pmcraid_enable_msix) &&
+ (pci_find_capability(pdev, PCI_CAP_ID_MSIX))) {
int num_hrrq = PMCRAID_NUM_MSIX_VECTORS;
struct msix_entry entries[PMCRAID_NUM_MSIX_VECTORS];
int i;
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 1134279..4db210d 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -42,7 +42,7 @@
*/
#define PMCRAID_DRIVER_NAME "PMC MaxRAID"
#define PMCRAID_DEVFILE "pmcsas"
-#define PMCRAID_DRIVER_VERSION "2.0.3"
+#define PMCRAID_DRIVER_VERSION "1.0.3"
#define PMCRAID_DRIVER_DATE __DATE__
#define PMCRAID_FW_VERSION_1 0x002
@@ -333,11 +333,9 @@
__u8 lun[PMCRAID_LUN_LEN];
} __attribute__((packed, aligned(4)));
-/* extended configuration table sizes are of 64 bytes in size */
-#define PMCRAID_CFGTE_EXT_SIZE 32
+/* extended configuration table sizes are also of 32 bytes in size */
struct pmcraid_config_table_entry_ext {
struct pmcraid_config_table_entry cfgte;
- __u8 cfgte_ext[PMCRAID_CFGTE_EXT_SIZE];
};
/* resource types (config_table_entry.resource_type values) */
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 3a22eff..9ce539d 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2409,7 +2409,6 @@
uint32_t enable_target_reset :1;
uint32_t enable_lip_full_login :1;
uint32_t enable_led_scheme :1;
- uint32_t inta_enabled :1;
uint32_t msi_enabled :1;
uint32_t msix_enabled :1;
uint32_t disable_serdes :1;
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 5f94430..4c1ba62 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1061,6 +1061,7 @@
fcp_cmnd->additional_cdb_len |= 2;
int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun);
+ host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun));
memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len);
cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32(
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 1f06ddd..7f77898 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2491,14 +2491,15 @@
skip_msi:
ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler,
- IRQF_SHARED, QLA2XXX_DRIVER_NAME, rsp);
+ ha->flags.msi_enabled ? 0 : IRQF_SHARED,
+ QLA2XXX_DRIVER_NAME, rsp);
if (ret) {
qla_printk(KERN_WARNING, ha,
"Failed to reserve interrupt %d already in use.\n",
ha->pdev->irq);
goto fail;
}
- ha->flags.inta_enabled = 1;
+
clear_risc_ints:
/*
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 8d9edfb3..ae2acac 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -2749,6 +2749,7 @@
goto queuing_error_fcp_cmnd;
int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun);
+ host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
/* build FCP_CMND IU */
memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 1644eab..2c0876c 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -829,7 +829,7 @@
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
srb_t *sp;
- int ret;
+ int ret = SUCCESS;
unsigned int id, lun;
unsigned long flags;
int wait = 0;
@@ -2064,6 +2064,7 @@
ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_82XX;
+ ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
ha->isp_ops = &qla82xx_isp_ops;
ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 8edbccb..cf0075a 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,9 +7,9 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.04-k0"
+#define QLA2XXX_VERSION "8.03.05-k0"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
-#define QLA_DRIVER_PATCH_VER 4
+#define QLA_DRIVER_PATCH_VER 5
#define QLA_DRIVER_BETA_VER 0
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 824b8fc..30ac116 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -615,7 +615,7 @@
return rtn;
}
-static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
+static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
{
if (!scmd->device->host->hostt->eh_abort_handler)
return FAILED;
@@ -623,31 +623,9 @@
return scmd->device->host->hostt->eh_abort_handler(scmd);
}
-/**
- * scsi_try_to_abort_cmd - Ask host to abort a running command.
- * @scmd: SCSI cmd to abort from Lower Level.
- *
- * Notes:
- * This function will not return until the user's completion function
- * has been called. there is no timeout on this operation. if the
- * author of the low-level driver wishes this operation to be timed,
- * they can provide this facility themselves. helper functions in
- * scsi_error.c can be supplied to make this easier to do.
- */
-static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
-{
- /*
- * scsi_done was called just after the command timed out and before
- * we had a chance to process it. (db)
- */
- if (scmd->serial_number == 0)
- return SUCCESS;
- return __scsi_try_to_abort_cmd(scmd);
-}
-
static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
{
- if (__scsi_try_to_abort_cmd(scmd) != SUCCESS)
+ if (scsi_try_to_abort_cmd(scmd) != SUCCESS)
if (scsi_try_bus_device_reset(scmd) != SUCCESS)
if (scsi_try_target_reset(scmd) != SUCCESS)
if (scsi_try_bus_reset(scmd) != SUCCESS)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index eafeeda..5b6bbae 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1403,11 +1403,6 @@
INIT_LIST_HEAD(&cmd->eh_entry);
- /*
- * Set the serial numbers back to zero
- */
- cmd->serial_number = 0;
-
atomic_inc(&cmd->device->iodone_cnt);
if (cmd->result)
atomic_inc(&cmd->device->ioerr_cnt);
diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c
index 3374618..25a8bc5 100644
--- a/drivers/serial/kgdboc.c
+++ b/drivers/serial/kgdboc.c
@@ -90,7 +90,8 @@
static void kgdboc_restore_input(void)
{
- schedule_work(&kgdboc_restore_input_work);
+ if (likely(system_state == SYSTEM_RUNNING))
+ schedule_work(&kgdboc_restore_input_work);
}
static int kgdboc_register_kbd(char **cptr)
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index 9043931..0838c79 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -413,6 +413,11 @@
{
while (dws->write(dws))
dws->read(dws);
+ /*
+ * There is a possibility that the last word of a transaction
+ * will be lost if data is not ready. Re-read to solve this issue.
+ */
+ dws->read(dws);
transfer_complete(dws);
}
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 05bf5a2..989e16e 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -951,7 +951,9 @@
* condition: callbacks we register can be executed at once, before we have
* initialized the struct atm_dev. To protect against this, all callbacks
* abort if atm_dev->dev_data is NULL. */
- atm_dev = atm_dev_register(instance->driver_name, &usbatm_atm_devops, -1, NULL);
+ atm_dev = atm_dev_register(instance->driver_name,
+ &instance->usb_intf->dev, &usbatm_atm_devops,
+ -1, NULL);
if (!atm_dev) {
usb_err(instance, "%s: failed to register ATM device!\n", __func__);
return -1;
@@ -966,14 +968,6 @@
/* temp init ATM device, set to 128kbit */
atm_dev->link_rate = 128 * 1000 / 424;
- ret = sysfs_create_link(&atm_dev->class_dev.kobj,
- &instance->usb_intf->dev.kobj, "device");
- if (ret) {
- atm_err(instance, "%s: sysfs_create_link failed: %d\n",
- __func__, ret);
- goto fail_sysfs;
- }
-
if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) {
atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret);
goto fail;
@@ -992,8 +986,6 @@
return 0;
fail:
- sysfs_remove_link(&atm_dev->class_dev.kobj, "device");
- fail_sysfs:
instance->atm_dev = NULL;
atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */
return ret;
@@ -1329,7 +1321,6 @@
/* ATM finalize */
if (instance->atm_dev) {
- sysfs_remove_link(&instance->atm_dev->class_dev.kobj, "device");
atm_dev_deregister(instance->atm_dev);
instance->atm_dev = NULL;
}
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 94701ff..159c77a 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -884,6 +884,7 @@
int r;
if (!write_length)
return 0;
+ write_length += write_address % VHOST_PAGE_SIZE;
write_address /= VHOST_PAGE_SIZE;
for (;;) {
u64 base = (u64)(unsigned long)log_base;
@@ -897,7 +898,7 @@
if (write_length <= VHOST_PAGE_SIZE)
break;
write_length -= VHOST_PAGE_SIZE;
- write_address += VHOST_PAGE_SIZE;
+ write_address += 1;
}
return r;
}
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 27c1fb4..ab77297 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1850,6 +1850,16 @@
<file:Documentation/fb/pxafb.txt> describes the available parameters.
+config PXA3XX_GCU
+ tristate "PXA3xx 2D graphics accelerator driver"
+ depends on FB_PXA
+ help
+ Kernelspace driver for the 2D graphics controller unit (GCU)
+ found on PXA3xx processors. There is a counterpart driver in the
+ DirectFB suite, see http://www.directfb.org/
+
+ If you compile this as a module, it will be called pxa3xx_gcu.
+
config FB_MBX
tristate "2700G LCD framebuffer support"
depends on FB && ARCH_PXA
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 485e8ed..9260a89 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -100,6 +100,7 @@
obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
obj-$(CONFIG_FB_PXA) += pxafb.o
obj-$(CONFIG_FB_PXA168) += pxa168fb.o
+obj-$(CONFIG_PXA3XX_GCU) += pxa3xx-gcu.o
obj-$(CONFIG_FB_W100) += w100fb.o
obj-$(CONFIG_FB_TMIO) += tmiofb.o
obj-$(CONFIG_FB_AU1100) += au1100fb.o
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index 0a4dbdc..de450c1 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -855,6 +855,7 @@
abs(cmode->yres - mode->yres);
if (diff > d) {
diff = d;
+ diff_refresh = abs(cmode->refresh - mode->refresh);
best = cmode;
} else if (diff == d) {
d = abs(cmode->refresh - mode->refresh);
diff --git a/drivers/video/pxa3xx-gcu.c b/drivers/video/pxa3xx-gcu.c
new file mode 100644
index 0000000..b81168d
--- /dev/null
+++ b/drivers/video/pxa3xx-gcu.c
@@ -0,0 +1,772 @@
+/*
+ * pxa3xx-gc.c - Linux kernel module for PXA3xx graphics controllers
+ *
+ * This driver needs a DirectFB counterpart in user space, communication
+ * is handled via mmap()ed memory areas and an ioctl.
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (c) 2009 Janine Kropp <nin@directfb.org>
+ * Copyright (c) 2009 Denis Oliver Kropp <dok@directfb.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * WARNING: This controller is attached to System Bus 2 of the PXA which
+ * needs its arbiter to be enabled explictly (CKENB & 1<<9).
+ * There is currently no way to do this from Linux, so you need to teach
+ * your bootloader for now.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/ioctl.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+
+#include "pxa3xx-gcu.h"
+
+#define DRV_NAME "pxa3xx-gcu"
+#define MISCDEV_MINOR 197
+
+#define REG_GCCR 0x00
+#define GCCR_SYNC_CLR (1 << 9)
+#define GCCR_BP_RST (1 << 8)
+#define GCCR_ABORT (1 << 6)
+#define GCCR_STOP (1 << 4)
+
+#define REG_GCISCR 0x04
+#define REG_GCIECR 0x08
+#define REG_GCRBBR 0x20
+#define REG_GCRBLR 0x24
+#define REG_GCRBHR 0x28
+#define REG_GCRBTR 0x2C
+#define REG_GCRBEXHR 0x30
+
+#define IE_EOB (1 << 0)
+#define IE_EEOB (1 << 5)
+#define IE_ALL 0xff
+
+#define SHARED_SIZE PAGE_ALIGN(sizeof(struct pxa3xx_gcu_shared))
+
+/* #define PXA3XX_GCU_DEBUG */
+/* #define PXA3XX_GCU_DEBUG_TIMER */
+
+#ifdef PXA3XX_GCU_DEBUG
+#define QDUMP(msg) \
+ do { \
+ QPRINT(priv, KERN_DEBUG, msg); \
+ } while (0)
+#else
+#define QDUMP(msg) do {} while (0)
+#endif
+
+#define QERROR(msg) \
+ do { \
+ QPRINT(priv, KERN_ERR, msg); \
+ } while (0)
+
+struct pxa3xx_gcu_batch {
+ struct pxa3xx_gcu_batch *next;
+ u32 *ptr;
+ dma_addr_t phys;
+ unsigned long length;
+};
+
+struct pxa3xx_gcu_priv {
+ void __iomem *mmio_base;
+ struct clk *clk;
+ struct pxa3xx_gcu_shared *shared;
+ dma_addr_t shared_phys;
+ struct resource *resource_mem;
+ struct miscdevice misc_dev;
+ struct file_operations misc_fops;
+ wait_queue_head_t wait_idle;
+ wait_queue_head_t wait_free;
+ spinlock_t spinlock;
+ struct timeval base_time;
+
+ struct pxa3xx_gcu_batch *free;
+
+ struct pxa3xx_gcu_batch *ready;
+ struct pxa3xx_gcu_batch *ready_last;
+ struct pxa3xx_gcu_batch *running;
+};
+
+static inline unsigned long
+gc_readl(struct pxa3xx_gcu_priv *priv, unsigned int off)
+{
+ return __raw_readl(priv->mmio_base + off);
+}
+
+static inline void
+gc_writel(struct pxa3xx_gcu_priv *priv, unsigned int off, unsigned long val)
+{
+ __raw_writel(val, priv->mmio_base + off);
+}
+
+#define QPRINT(priv, level, msg) \
+ do { \
+ struct timeval tv; \
+ struct pxa3xx_gcu_shared *shared = priv->shared; \
+ u32 base = gc_readl(priv, REG_GCRBBR); \
+ \
+ do_gettimeofday(&tv); \
+ \
+ printk(level "%ld.%03ld.%03ld - %-17s: %-21s (%s, " \
+ "STATUS " \
+ "0x%02lx, B 0x%08lx [%ld], E %5ld, H %5ld, " \
+ "T %5ld)\n", \
+ tv.tv_sec - priv->base_time.tv_sec, \
+ tv.tv_usec / 1000, tv.tv_usec % 1000, \
+ __func__, msg, \
+ shared->hw_running ? "running" : " idle", \
+ gc_readl(priv, REG_GCISCR), \
+ gc_readl(priv, REG_GCRBBR), \
+ gc_readl(priv, REG_GCRBLR), \
+ (gc_readl(priv, REG_GCRBEXHR) - base) / 4, \
+ (gc_readl(priv, REG_GCRBHR) - base) / 4, \
+ (gc_readl(priv, REG_GCRBTR) - base) / 4); \
+ } while (0)
+
+static void
+pxa3xx_gcu_reset(struct pxa3xx_gcu_priv *priv)
+{
+ QDUMP("RESET");
+
+ /* disable interrupts */
+ gc_writel(priv, REG_GCIECR, 0);
+
+ /* reset hardware */
+ gc_writel(priv, REG_GCCR, GCCR_ABORT);
+ gc_writel(priv, REG_GCCR, 0);
+
+ memset(priv->shared, 0, SHARED_SIZE);
+ priv->shared->buffer_phys = priv->shared_phys;
+ priv->shared->magic = PXA3XX_GCU_SHARED_MAGIC;
+
+ do_gettimeofday(&priv->base_time);
+
+ /* set up the ring buffer pointers */
+ gc_writel(priv, REG_GCRBLR, 0);
+ gc_writel(priv, REG_GCRBBR, priv->shared_phys);
+ gc_writel(priv, REG_GCRBTR, priv->shared_phys);
+
+ /* enable all IRQs except EOB */
+ gc_writel(priv, REG_GCIECR, IE_ALL & ~IE_EOB);
+}
+
+static void
+dump_whole_state(struct pxa3xx_gcu_priv *priv)
+{
+ struct pxa3xx_gcu_shared *sh = priv->shared;
+ u32 base = gc_readl(priv, REG_GCRBBR);
+
+ QDUMP("DUMP");
+
+ printk(KERN_DEBUG "== PXA3XX-GCU DUMP ==\n"
+ "%s, STATUS 0x%02lx, B 0x%08lx [%ld], E %5ld, H %5ld, T %5ld\n",
+ sh->hw_running ? "running" : "idle ",
+ gc_readl(priv, REG_GCISCR),
+ gc_readl(priv, REG_GCRBBR),
+ gc_readl(priv, REG_GCRBLR),
+ (gc_readl(priv, REG_GCRBEXHR) - base) / 4,
+ (gc_readl(priv, REG_GCRBHR) - base) / 4,
+ (gc_readl(priv, REG_GCRBTR) - base) / 4);
+}
+
+static void
+flush_running(struct pxa3xx_gcu_priv *priv)
+{
+ struct pxa3xx_gcu_batch *running = priv->running;
+ struct pxa3xx_gcu_batch *next;
+
+ while (running) {
+ next = running->next;
+ running->next = priv->free;
+ priv->free = running;
+ running = next;
+ }
+
+ priv->running = NULL;
+}
+
+static void
+run_ready(struct pxa3xx_gcu_priv *priv)
+{
+ unsigned int num = 0;
+ struct pxa3xx_gcu_shared *shared = priv->shared;
+ struct pxa3xx_gcu_batch *ready = priv->ready;
+
+ QDUMP("Start");
+
+ BUG_ON(!ready);
+
+ shared->buffer[num++] = 0x05000000;
+
+ while (ready) {
+ shared->buffer[num++] = 0x00000001;
+ shared->buffer[num++] = ready->phys;
+ ready = ready->next;
+ }
+
+ shared->buffer[num++] = 0x05000000;
+ priv->running = priv->ready;
+ priv->ready = priv->ready_last = NULL;
+ gc_writel(priv, REG_GCRBLR, 0);
+ shared->hw_running = 1;
+
+ /* ring base address */
+ gc_writel(priv, REG_GCRBBR, shared->buffer_phys);
+
+ /* ring tail address */
+ gc_writel(priv, REG_GCRBTR, shared->buffer_phys + num * 4);
+
+ /* ring length */
+ gc_writel(priv, REG_GCRBLR, ((num + 63) & ~63) * 4);
+}
+
+static irqreturn_t
+pxa3xx_gcu_handle_irq(int irq, void *ctx)
+{
+ struct pxa3xx_gcu_priv *priv = ctx;
+ struct pxa3xx_gcu_shared *shared = priv->shared;
+ u32 status = gc_readl(priv, REG_GCISCR) & IE_ALL;
+
+ QDUMP("-Interrupt");
+
+ if (!status)
+ return IRQ_NONE;
+
+ spin_lock(&priv->spinlock);
+ shared->num_interrupts++;
+
+ if (status & IE_EEOB) {
+ QDUMP(" [EEOB]");
+
+ flush_running(priv);
+ wake_up_all(&priv->wait_free);
+
+ if (priv->ready) {
+ run_ready(priv);
+ } else {
+ /* There is no more data prepared by the userspace.
+ * Set hw_running = 0 and wait for the next userspace
+ * kick-off */
+ shared->num_idle++;
+ shared->hw_running = 0;
+
+ QDUMP(" '-> Idle.");
+
+ /* set ring buffer length to zero */
+ gc_writel(priv, REG_GCRBLR, 0);
+
+ wake_up_all(&priv->wait_idle);
+ }
+
+ shared->num_done++;
+ } else {
+ QERROR(" [???]");
+ dump_whole_state(priv);
+ }
+
+ /* Clear the interrupt */
+ gc_writel(priv, REG_GCISCR, status);
+ spin_unlock(&priv->spinlock);
+
+ return IRQ_HANDLED;
+}
+
+static int
+pxa3xx_gcu_wait_idle(struct pxa3xx_gcu_priv *priv)
+{
+ int ret = 0;
+
+ QDUMP("Waiting for idle...");
+
+ /* Does not need to be atomic. There's a lock in user space,
+ * but anyhow, this is just for statistics. */
+ priv->shared->num_wait_idle++;
+
+ while (priv->shared->hw_running) {
+ int num = priv->shared->num_interrupts;
+ u32 rbexhr = gc_readl(priv, REG_GCRBEXHR);
+
+ ret = wait_event_interruptible_timeout(priv->wait_idle,
+ !priv->shared->hw_running, HZ*4);
+
+ if (ret < 0)
+ break;
+
+ if (ret > 0)
+ continue;
+
+ if (gc_readl(priv, REG_GCRBEXHR) == rbexhr &&
+ priv->shared->num_interrupts == num) {
+ QERROR("TIMEOUT");
+ ret = -ETIMEDOUT;
+ break;
+ }
+ }
+
+ QDUMP("done");
+
+ return ret;
+}
+
+static int
+pxa3xx_gcu_wait_free(struct pxa3xx_gcu_priv *priv)
+{
+ int ret = 0;
+
+ QDUMP("Waiting for free...");
+
+ /* Does not need to be atomic. There's a lock in user space,
+ * but anyhow, this is just for statistics. */
+ priv->shared->num_wait_free++;
+
+ while (!priv->free) {
+ u32 rbexhr = gc_readl(priv, REG_GCRBEXHR);
+
+ ret = wait_event_interruptible_timeout(priv->wait_free,
+ priv->free, HZ*4);
+
+ if (ret < 0)
+ break;
+
+ if (ret > 0)
+ continue;
+
+ if (gc_readl(priv, REG_GCRBEXHR) == rbexhr) {
+ QERROR("TIMEOUT");
+ ret = -ETIMEDOUT;
+ break;
+ }
+ }
+
+ QDUMP("done");
+
+ return ret;
+}
+
+/* Misc device layer */
+
+static ssize_t
+pxa3xx_gcu_misc_write(struct file *filp, const char *buff,
+ size_t count, loff_t *offp)
+{
+ int ret;
+ unsigned long flags;
+ struct pxa3xx_gcu_batch *buffer;
+ struct pxa3xx_gcu_priv *priv =
+ container_of(filp->f_op, struct pxa3xx_gcu_priv, misc_fops);
+
+ int words = count / 4;
+
+ /* Does not need to be atomic. There's a lock in user space,
+ * but anyhow, this is just for statistics. */
+ priv->shared->num_writes++;
+
+ priv->shared->num_words += words;
+
+ /* Last word reserved for batch buffer end command */
+ if (words >= PXA3XX_GCU_BATCH_WORDS)
+ return -E2BIG;
+
+ /* Wait for a free buffer */
+ if (!priv->free) {
+ ret = pxa3xx_gcu_wait_free(priv);
+ if (ret < 0)
+ return ret;
+ }
+
+ /*
+ * Get buffer from free list
+ */
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+ buffer = priv->free;
+ priv->free = buffer->next;
+
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+
+
+ /* Copy data from user into buffer */
+ ret = copy_from_user(buffer->ptr, buff, words * 4);
+ if (ret) {
+ spin_lock_irqsave(&priv->spinlock, flags);
+ buffer->next = priv->free;
+ priv->free = buffer;
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+ return ret;
+ }
+
+ buffer->length = words;
+
+ /* Append batch buffer end command */
+ buffer->ptr[words] = 0x01000000;
+
+ /*
+ * Add buffer to ready list
+ */
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+ buffer->next = NULL;
+
+ if (priv->ready) {
+ BUG_ON(priv->ready_last == NULL);
+
+ priv->ready_last->next = buffer;
+ } else
+ priv->ready = buffer;
+
+ priv->ready_last = buffer;
+
+ if (!priv->shared->hw_running)
+ run_ready(priv);
+
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+
+ return words * 4;
+}
+
+
+static long
+pxa3xx_gcu_misc_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ unsigned long flags;
+ struct pxa3xx_gcu_priv *priv =
+ container_of(filp->f_op, struct pxa3xx_gcu_priv, misc_fops);
+
+ switch (cmd) {
+ case PXA3XX_GCU_IOCTL_RESET:
+ spin_lock_irqsave(&priv->spinlock, flags);
+ pxa3xx_gcu_reset(priv);
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+ return 0;
+
+ case PXA3XX_GCU_IOCTL_WAIT_IDLE:
+ return pxa3xx_gcu_wait_idle(priv);
+ }
+
+ return -ENOSYS;
+}
+
+static int
+pxa3xx_gcu_misc_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+ unsigned int size = vma->vm_end - vma->vm_start;
+ struct pxa3xx_gcu_priv *priv =
+ container_of(filp->f_op, struct pxa3xx_gcu_priv, misc_fops);
+
+ switch (vma->vm_pgoff) {
+ case 0:
+ /* hand out the shared data area */
+ if (size != SHARED_SIZE)
+ return -EINVAL;
+
+ return dma_mmap_coherent(NULL, vma,
+ priv->shared, priv->shared_phys, size);
+
+ case SHARED_SIZE >> PAGE_SHIFT:
+ /* hand out the MMIO base for direct register access
+ * from userspace */
+ if (size != resource_size(priv->resource_mem))
+ return -EINVAL;
+
+ vma->vm_flags |= VM_IO;
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ return io_remap_pfn_range(vma, vma->vm_start,
+ priv->resource_mem->start >> PAGE_SHIFT,
+ size, vma->vm_page_prot);
+ }
+
+ return -EINVAL;
+}
+
+
+#ifdef PXA3XX_GCU_DEBUG_TIMER
+static struct timer_list pxa3xx_gcu_debug_timer;
+
+static void pxa3xx_gcu_debug_timedout(unsigned long ptr)
+{
+ struct pxa3xx_gcu_priv *priv = (struct pxa3xx_gcu_priv *) ptr;
+
+ QERROR("Timer DUMP");
+
+ /* init the timer structure */
+ init_timer(&pxa3xx_gcu_debug_timer);
+ pxa3xx_gcu_debug_timer.function = pxa3xx_gcu_debug_timedout;
+ pxa3xx_gcu_debug_timer.data = ptr;
+ pxa3xx_gcu_debug_timer.expires = jiffies + 5*HZ; /* one second */
+
+ add_timer(&pxa3xx_gcu_debug_timer);
+}
+
+static void pxa3xx_gcu_init_debug_timer(void)
+{
+ pxa3xx_gcu_debug_timedout((unsigned long) &pxa3xx_gcu_debug_timer);
+}
+#else
+static inline void pxa3xx_gcu_init_debug_timer(void) {}
+#endif
+
+static int
+add_buffer(struct platform_device *dev,
+ struct pxa3xx_gcu_priv *priv)
+{
+ struct pxa3xx_gcu_batch *buffer;
+
+ buffer = kzalloc(sizeof(struct pxa3xx_gcu_batch), GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ buffer->ptr = dma_alloc_coherent(&dev->dev, PXA3XX_GCU_BATCH_WORDS * 4,
+ &buffer->phys, GFP_KERNEL);
+ if (!buffer->ptr) {
+ kfree(buffer);
+ return -ENOMEM;
+ }
+
+ buffer->next = priv->free;
+
+ priv->free = buffer;
+
+ return 0;
+}
+
+static void
+free_buffers(struct platform_device *dev,
+ struct pxa3xx_gcu_priv *priv)
+{
+ struct pxa3xx_gcu_batch *next, *buffer = priv->free;
+
+ while (buffer) {
+ next = buffer->next;
+
+ dma_free_coherent(&dev->dev, PXA3XX_GCU_BATCH_WORDS * 4,
+ buffer->ptr, buffer->phys);
+
+ kfree(buffer);
+
+ buffer = next;
+ }
+
+ priv->free = NULL;
+}
+
+static int __devinit
+pxa3xx_gcu_probe(struct platform_device *dev)
+{
+ int i, ret, irq;
+ struct resource *r;
+ struct pxa3xx_gcu_priv *priv;
+
+ priv = kzalloc(sizeof(struct pxa3xx_gcu_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ for (i = 0; i < 8; i++) {
+ ret = add_buffer(dev, priv);
+ if (ret) {
+ dev_err(&dev->dev, "failed to allocate DMA memory\n");
+ goto err_free_priv;
+ }
+ }
+
+ init_waitqueue_head(&priv->wait_idle);
+ init_waitqueue_head(&priv->wait_free);
+ spin_lock_init(&priv->spinlock);
+
+ /* we allocate the misc device structure as part of our own allocation,
+ * so we can get a pointer to our priv structure later on with
+ * container_of(). This isn't really necessary as we have a fixed minor
+ * number anyway, but this is to avoid statics. */
+
+ priv->misc_fops.owner = THIS_MODULE;
+ priv->misc_fops.write = pxa3xx_gcu_misc_write;
+ priv->misc_fops.unlocked_ioctl = pxa3xx_gcu_misc_ioctl;
+ priv->misc_fops.mmap = pxa3xx_gcu_misc_mmap;
+
+ priv->misc_dev.minor = MISCDEV_MINOR,
+ priv->misc_dev.name = DRV_NAME,
+ priv->misc_dev.fops = &priv->misc_fops,
+
+ /* register misc device */
+ ret = misc_register(&priv->misc_dev);
+ if (ret < 0) {
+ dev_err(&dev->dev, "misc_register() for minor %d failed\n",
+ MISCDEV_MINOR);
+ goto err_free_priv;
+ }
+
+ /* handle IO resources */
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&dev->dev, "no I/O memory resource defined\n");
+ ret = -ENODEV;
+ goto err_misc_deregister;
+ }
+
+ if (!request_mem_region(r->start, resource_size(r), dev->name)) {
+ dev_err(&dev->dev, "failed to request I/O memory\n");
+ ret = -EBUSY;
+ goto err_misc_deregister;
+ }
+
+ priv->mmio_base = ioremap_nocache(r->start, resource_size(r));
+ if (!priv->mmio_base) {
+ dev_err(&dev->dev, "failed to map I/O memory\n");
+ ret = -EBUSY;
+ goto err_free_mem_region;
+ }
+
+ /* allocate dma memory */
+ priv->shared = dma_alloc_coherent(&dev->dev, SHARED_SIZE,
+ &priv->shared_phys, GFP_KERNEL);
+
+ if (!priv->shared) {
+ dev_err(&dev->dev, "failed to allocate DMA memory\n");
+ ret = -ENOMEM;
+ goto err_free_io;
+ }
+
+ /* enable the clock */
+ priv->clk = clk_get(&dev->dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(&dev->dev, "failed to get clock\n");
+ ret = -ENODEV;
+ goto err_free_dma;
+ }
+
+ ret = clk_enable(priv->clk);
+ if (ret < 0) {
+ dev_err(&dev->dev, "failed to enable clock\n");
+ goto err_put_clk;
+ }
+
+ /* request the IRQ */
+ irq = platform_get_irq(dev, 0);
+ if (irq < 0) {
+ dev_err(&dev->dev, "no IRQ defined\n");
+ ret = -ENODEV;
+ goto err_put_clk;
+ }
+
+ ret = request_irq(irq, pxa3xx_gcu_handle_irq,
+ IRQF_DISABLED, DRV_NAME, priv);
+ if (ret) {
+ dev_err(&dev->dev, "request_irq failed\n");
+ ret = -EBUSY;
+ goto err_put_clk;
+ }
+
+ platform_set_drvdata(dev, priv);
+ priv->resource_mem = r;
+ pxa3xx_gcu_reset(priv);
+ pxa3xx_gcu_init_debug_timer();
+
+ dev_info(&dev->dev, "registered @0x%p, DMA 0x%p (%d bytes), IRQ %d\n",
+ (void *) r->start, (void *) priv->shared_phys,
+ SHARED_SIZE, irq);
+ return 0;
+
+err_put_clk:
+ clk_disable(priv->clk);
+ clk_put(priv->clk);
+
+err_free_dma:
+ dma_free_coherent(&dev->dev, SHARED_SIZE,
+ priv->shared, priv->shared_phys);
+
+err_free_io:
+ iounmap(priv->mmio_base);
+
+err_free_mem_region:
+ release_mem_region(r->start, resource_size(r));
+
+err_misc_deregister:
+ misc_deregister(&priv->misc_dev);
+
+err_free_priv:
+ platform_set_drvdata(dev, NULL);
+ free_buffers(dev, priv);
+ kfree(priv);
+ return ret;
+}
+
+static int __devexit
+pxa3xx_gcu_remove(struct platform_device *dev)
+{
+ struct pxa3xx_gcu_priv *priv = platform_get_drvdata(dev);
+ struct resource *r = priv->resource_mem;
+
+ pxa3xx_gcu_wait_idle(priv);
+
+ misc_deregister(&priv->misc_dev);
+ dma_free_coherent(&dev->dev, SHARED_SIZE,
+ priv->shared, priv->shared_phys);
+ iounmap(priv->mmio_base);
+ release_mem_region(r->start, resource_size(r));
+ platform_set_drvdata(dev, NULL);
+ clk_disable(priv->clk);
+ free_buffers(dev, priv);
+ kfree(priv);
+
+ return 0;
+}
+
+static struct platform_driver pxa3xx_gcu_driver = {
+ .probe = pxa3xx_gcu_probe,
+ .remove = __devexit_p(pxa3xx_gcu_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ },
+};
+
+static int __init
+pxa3xx_gcu_init(void)
+{
+ return platform_driver_register(&pxa3xx_gcu_driver);
+}
+
+static void __exit
+pxa3xx_gcu_exit(void)
+{
+ platform_driver_unregister(&pxa3xx_gcu_driver);
+}
+
+module_init(pxa3xx_gcu_init);
+module_exit(pxa3xx_gcu_exit);
+
+MODULE_DESCRIPTION("PXA3xx graphics controller unit driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(MISCDEV_MINOR);
+MODULE_AUTHOR("Janine Kropp <nin@directfb.org>, "
+ "Denis Oliver Kropp <dok@directfb.org>, "
+ "Daniel Mack <daniel@caiaq.de>");
diff --git a/drivers/video/pxa3xx-gcu.h b/drivers/video/pxa3xx-gcu.h
new file mode 100644
index 0000000..0428ed0
--- /dev/null
+++ b/drivers/video/pxa3xx-gcu.h
@@ -0,0 +1,38 @@
+#ifndef __PXA3XX_GCU_H__
+#define __PXA3XX_GCU_H__
+
+#include <linux/types.h>
+
+/* Number of 32bit words in display list (ring buffer). */
+#define PXA3XX_GCU_BUFFER_WORDS ((256 * 1024 - 256) / 4)
+
+/* To be increased when breaking the ABI */
+#define PXA3XX_GCU_SHARED_MAGIC 0x30000001
+
+#define PXA3XX_GCU_BATCH_WORDS 8192
+
+struct pxa3xx_gcu_shared {
+ u32 buffer[PXA3XX_GCU_BUFFER_WORDS];
+
+ bool hw_running;
+
+ unsigned long buffer_phys;
+
+ unsigned int num_words;
+ unsigned int num_writes;
+ unsigned int num_done;
+ unsigned int num_interrupts;
+ unsigned int num_wait_idle;
+ unsigned int num_wait_free;
+ unsigned int num_idle;
+
+ u32 magic;
+};
+
+/* Initialization and synchronization.
+ * Hardware is started upon write(). */
+#define PXA3XX_GCU_IOCTL_RESET _IO('G', 0)
+#define PXA3XX_GCU_IOCTL_WAIT_IDLE _IO('G', 2)
+
+#endif /* __PXA3XX_GCU_H__ */
+
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index d5c1401..d34896c 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -980,19 +980,11 @@
}
}
-static DEFINE_MUTEX(autofs4_ioctl_mutex);
-
static long autofs4_root_ioctl(struct file *filp,
unsigned int cmd, unsigned long arg)
{
- long ret;
struct inode *inode = filp->f_dentry->d_inode;
-
- mutex_lock(&autofs4_ioctl_mutex);
- ret = autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
- mutex_unlock(&autofs4_ioctl_mutex);
-
- return ret;
+ return autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
}
#ifdef CONFIG_COMPAT
@@ -1002,13 +994,11 @@
struct inode *inode = filp->f_path.dentry->d_inode;
int ret;
- mutex_lock(&autofs4_ioctl_mutex);
if (cmd == AUTOFS_IOC_READY || cmd == AUTOFS_IOC_FAIL)
ret = autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
else
ret = autofs4_root_ioctl_unlocked(inode, filp, cmd,
(unsigned long)compat_ptr(arg));
- mutex_unlock(&autofs4_ioctl_mutex);
return ret;
}
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index c547cca..51d2e4d 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -696,6 +696,7 @@
__btree_submit_bio_done);
}
+#ifdef CONFIG_MIGRATION
static int btree_migratepage(struct address_space *mapping,
struct page *newpage, struct page *page)
{
@@ -712,12 +713,9 @@
if (page_has_private(page) &&
!try_to_release_page(page, GFP_KERNEL))
return -EAGAIN;
-#ifdef CONFIG_MIGRATION
return migrate_page(mapping, newpage, page);
-#else
- return -ENOSYS;
-#endif
}
+#endif
static int btree_writepage(struct page *page, struct writeback_control *wbc)
{
@@ -1009,7 +1007,10 @@
blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
blocksize, generation);
- BUG_ON(!root->node);
+ if (!root->node || !btrfs_buffer_uptodate(root->node, generation)) {
+ free_extent_buffer(root->node);
+ return -EIO;
+ }
root->commit_root = btrfs_root_node(root);
return 0;
}
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index bcd59c7..227e581 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -429,6 +429,7 @@
static int cache_block_group(struct btrfs_block_group_cache *cache,
struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
int load_cache_only)
{
struct btrfs_fs_info *fs_info = cache->fs_info;
@@ -442,9 +443,12 @@
/*
* We can't do the read from on-disk cache during a commit since we need
- * to have the normal tree locking.
+ * to have the normal tree locking. Also if we are currently trying to
+ * allocate blocks for the tree root we can't do the fast caching since
+ * we likely hold important locks.
*/
- if (!trans->transaction->in_commit) {
+ if (!trans->transaction->in_commit &&
+ (root && root != root->fs_info->tree_root)) {
spin_lock(&cache->lock);
if (cache->cached != BTRFS_CACHE_NO) {
spin_unlock(&cache->lock);
@@ -2741,6 +2745,7 @@
struct btrfs_root *root = block_group->fs_info->tree_root;
struct inode *inode = NULL;
u64 alloc_hint = 0;
+ int dcs = BTRFS_DC_ERROR;
int num_pages = 0;
int retries = 0;
int ret = 0;
@@ -2795,6 +2800,8 @@
spin_lock(&block_group->lock);
if (block_group->cached != BTRFS_CACHE_FINISHED) {
+ /* We're not cached, don't bother trying to write stuff out */
+ dcs = BTRFS_DC_WRITTEN;
spin_unlock(&block_group->lock);
goto out_put;
}
@@ -2821,6 +2828,8 @@
ret = btrfs_prealloc_file_range_trans(inode, trans, 0, 0, num_pages,
num_pages, num_pages,
&alloc_hint);
+ if (!ret)
+ dcs = BTRFS_DC_SETUP;
btrfs_free_reserved_data_space(inode, num_pages);
out_put:
iput(inode);
@@ -2828,10 +2837,7 @@
btrfs_release_path(root, path);
out:
spin_lock(&block_group->lock);
- if (ret)
- block_group->disk_cache_state = BTRFS_DC_ERROR;
- else
- block_group->disk_cache_state = BTRFS_DC_SETUP;
+ block_group->disk_cache_state = dcs;
spin_unlock(&block_group->lock);
return ret;
@@ -3037,7 +3043,13 @@
u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags)
{
- u64 num_devices = root->fs_info->fs_devices->rw_devices;
+ /*
+ * we add in the count of missing devices because we want
+ * to make sure that any RAID levels on a degraded FS
+ * continue to be honored.
+ */
+ u64 num_devices = root->fs_info->fs_devices->rw_devices +
+ root->fs_info->fs_devices->missing_devices;
if (num_devices == 1)
flags &= ~(BTRFS_BLOCK_GROUP_RAID1 | BTRFS_BLOCK_GROUP_RAID0);
@@ -4080,7 +4092,7 @@
* space back to the block group, otherwise we will leak space.
*/
if (!alloc && cache->cached == BTRFS_CACHE_NO)
- cache_block_group(cache, trans, 1);
+ cache_block_group(cache, trans, NULL, 1);
byte_in_group = bytenr - cache->key.objectid;
WARN_ON(byte_in_group > cache->key.offset);
@@ -4930,11 +4942,31 @@
btrfs_get_block_group(block_group);
search_start = block_group->key.objectid;
+ /*
+ * this can happen if we end up cycling through all the
+ * raid types, but we want to make sure we only allocate
+ * for the proper type.
+ */
+ if (!block_group_bits(block_group, data)) {
+ u64 extra = BTRFS_BLOCK_GROUP_DUP |
+ BTRFS_BLOCK_GROUP_RAID1 |
+ BTRFS_BLOCK_GROUP_RAID10;
+
+ /*
+ * if they asked for extra copies and this block group
+ * doesn't provide them, bail. This does allow us to
+ * fill raid0 from raid1.
+ */
+ if ((data & extra) && !(block_group->flags & extra))
+ goto loop;
+ }
+
have_block_group:
if (unlikely(block_group->cached == BTRFS_CACHE_NO)) {
u64 free_percent;
- ret = cache_block_group(block_group, trans, 1);
+ ret = cache_block_group(block_group, trans,
+ orig_root, 1);
if (block_group->cached == BTRFS_CACHE_FINISHED)
goto have_block_group;
@@ -4958,7 +4990,8 @@
if (loop > LOOP_CACHING_NOWAIT ||
(loop > LOOP_FIND_IDEAL &&
atomic_read(&space_info->caching_threads) < 2)) {
- ret = cache_block_group(block_group, trans, 0);
+ ret = cache_block_group(block_group, trans,
+ orig_root, 0);
BUG_ON(ret);
}
found_uncached_bg = true;
@@ -5515,7 +5548,7 @@
u64 num_bytes = ins->offset;
block_group = btrfs_lookup_block_group(root->fs_info, ins->objectid);
- cache_block_group(block_group, trans, 0);
+ cache_block_group(block_group, trans, NULL, 0);
caching_ctl = get_caching_control(block_group);
if (!caching_ctl) {
@@ -6300,9 +6333,13 @@
NULL, NULL);
BUG_ON(ret < 0);
if (ret > 0) {
- ret = btrfs_del_orphan_item(trans, tree_root,
- root->root_key.objectid);
- BUG_ON(ret);
+ /* if we fail to delete the orphan item this time
+ * around, it'll get picked up the next time.
+ *
+ * The most common failure here is just -ENOENT.
+ */
+ btrfs_del_orphan_item(trans, tree_root,
+ root->root_key.objectid);
}
}
@@ -7878,7 +7915,14 @@
u64 stripped = BTRFS_BLOCK_GROUP_RAID0 |
BTRFS_BLOCK_GROUP_RAID1 | BTRFS_BLOCK_GROUP_RAID10;
- num_devices = root->fs_info->fs_devices->rw_devices;
+ /*
+ * we add in the count of missing devices because we want
+ * to make sure that any RAID levels on a degraded FS
+ * continue to be honored.
+ */
+ num_devices = root->fs_info->fs_devices->rw_devices +
+ root->fs_info->fs_devices->missing_devices;
+
if (num_devices == 1) {
stripped |= BTRFS_BLOCK_GROUP_DUP;
stripped = flags & ~stripped;
@@ -8247,7 +8291,6 @@
break;
if (ret != 0)
goto error;
-
leaf = path->nodes[0];
btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
cache = kzalloc(sizeof(*cache), GFP_NOFS);
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index c1faded..66836d8 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -48,30 +48,34 @@
struct page **prepared_pages,
struct iov_iter *i)
{
- size_t copied;
+ size_t copied = 0;
int pg = 0;
int offset = pos & (PAGE_CACHE_SIZE - 1);
+ int total_copied = 0;
while (write_bytes > 0) {
size_t count = min_t(size_t,
PAGE_CACHE_SIZE - offset, write_bytes);
struct page *page = prepared_pages[pg];
-again:
- if (unlikely(iov_iter_fault_in_readable(i, count)))
- return -EFAULT;
-
- /* Copy data from userspace to the current page */
- copied = iov_iter_copy_from_user(page, i, offset, count);
+ /*
+ * Copy data from userspace to the current page
+ *
+ * Disable pagefault to avoid recursive lock since
+ * the pages are already locked
+ */
+ pagefault_disable();
+ copied = iov_iter_copy_from_user_atomic(page, i, offset, count);
+ pagefault_enable();
/* Flush processor's dcache for this page */
flush_dcache_page(page);
iov_iter_advance(i, copied);
write_bytes -= copied;
+ total_copied += copied;
+ /* Return to btrfs_file_aio_write to fault page */
if (unlikely(copied == 0)) {
- count = min_t(size_t, PAGE_CACHE_SIZE - offset,
- iov_iter_single_seg_count(i));
- goto again;
+ break;
}
if (unlikely(copied < PAGE_CACHE_SIZE - offset)) {
@@ -81,7 +85,7 @@
offset = 0;
}
}
- return 0;
+ return total_copied;
}
/*
@@ -854,6 +858,8 @@
unsigned long last_index;
int will_write;
int buffered = 0;
+ int copied = 0;
+ int dirty_pages = 0;
will_write = ((file->f_flags & O_DSYNC) || IS_SYNC(inode) ||
(file->f_flags & O_DIRECT));
@@ -970,7 +976,17 @@
WARN_ON(num_pages > nrptrs);
memset(pages, 0, sizeof(struct page *) * nrptrs);
- ret = btrfs_delalloc_reserve_space(inode, write_bytes);
+ /*
+ * Fault pages before locking them in prepare_pages
+ * to avoid recursive lock
+ */
+ if (unlikely(iov_iter_fault_in_readable(&i, write_bytes))) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ ret = btrfs_delalloc_reserve_space(inode,
+ num_pages << PAGE_CACHE_SHIFT);
if (ret)
goto out;
@@ -978,37 +994,49 @@
pos, first_index, last_index,
write_bytes);
if (ret) {
- btrfs_delalloc_release_space(inode, write_bytes);
+ btrfs_delalloc_release_space(inode,
+ num_pages << PAGE_CACHE_SHIFT);
goto out;
}
- ret = btrfs_copy_from_user(pos, num_pages,
+ copied = btrfs_copy_from_user(pos, num_pages,
write_bytes, pages, &i);
- if (ret == 0) {
+ dirty_pages = (copied + PAGE_CACHE_SIZE - 1) >>
+ PAGE_CACHE_SHIFT;
+
+ if (num_pages > dirty_pages) {
+ if (copied > 0)
+ atomic_inc(
+ &BTRFS_I(inode)->outstanding_extents);
+ btrfs_delalloc_release_space(inode,
+ (num_pages - dirty_pages) <<
+ PAGE_CACHE_SHIFT);
+ }
+
+ if (copied > 0) {
dirty_and_release_pages(NULL, root, file, pages,
- num_pages, pos, write_bytes);
+ dirty_pages, pos, copied);
}
btrfs_drop_pages(pages, num_pages);
- if (ret) {
- btrfs_delalloc_release_space(inode, write_bytes);
- goto out;
+
+ if (copied > 0) {
+ if (will_write) {
+ filemap_fdatawrite_range(inode->i_mapping, pos,
+ pos + copied - 1);
+ } else {
+ balance_dirty_pages_ratelimited_nr(
+ inode->i_mapping,
+ dirty_pages);
+ if (dirty_pages <
+ (root->leafsize >> PAGE_CACHE_SHIFT) + 1)
+ btrfs_btree_balance_dirty(root, 1);
+ btrfs_throttle(root);
+ }
}
- if (will_write) {
- filemap_fdatawrite_range(inode->i_mapping, pos,
- pos + write_bytes - 1);
- } else {
- balance_dirty_pages_ratelimited_nr(inode->i_mapping,
- num_pages);
- if (num_pages <
- (root->leafsize >> PAGE_CACHE_SHIFT) + 1)
- btrfs_btree_balance_dirty(root, 1);
- btrfs_throttle(root);
- }
-
- pos += write_bytes;
- num_written += write_bytes;
+ pos += copied;
+ num_written += copied;
cond_resched();
}
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 22ee0dc..60d6842 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -290,7 +290,7 @@
(unsigned long long)BTRFS_I(inode)->generation,
(unsigned long long)generation,
(unsigned long long)block_group->key.objectid);
- goto out;
+ goto free_cache;
}
if (!num_entries)
@@ -524,6 +524,12 @@
return 0;
}
+ node = rb_first(&block_group->free_space_offset);
+ if (!node) {
+ iput(inode);
+ return 0;
+ }
+
last_index = (i_size_read(inode) - 1) >> PAGE_CACHE_SHIFT;
filemap_write_and_wait(inode->i_mapping);
btrfs_wait_ordered_range(inode, inode->i_size &
@@ -543,10 +549,6 @@
*/
first_page_offset = (sizeof(u32) * num_checksums) + sizeof(u64);
- node = rb_first(&block_group->free_space_offset);
- if (!node)
- goto out_free;
-
/*
* Lock all pages first so we can lock the extent safely.
*
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 8039390..72f31ec 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -495,7 +495,7 @@
add_async_extent(async_cow, start, num_bytes,
total_compressed, pages, nr_pages_ret);
- if (start + num_bytes < end && start + num_bytes < actual_end) {
+ if (start + num_bytes < end) {
start += num_bytes;
pages = NULL;
cond_resched();
@@ -5712,9 +5712,9 @@
if (err) {
printk(KERN_ERR "btrfs direct IO failed ino %lu rw %lu "
- "disk_bytenr %lu len %u err no %d\n",
- dip->inode->i_ino, bio->bi_rw, bio->bi_sector,
- bio->bi_size, err);
+ "sector %#Lx len %u err no %d\n",
+ dip->inode->i_ino, bio->bi_rw,
+ (unsigned long long)bio->bi_sector, bio->bi_size, err);
dip->errors = 1;
/*
@@ -5934,8 +5934,7 @@
*/
if (write) {
struct btrfs_ordered_extent *ordered;
- ordered = btrfs_lookup_ordered_extent(inode,
- dip->logical_offset);
+ ordered = btrfs_lookup_ordered_extent(inode, file_offset);
if (!test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags) &&
!test_bit(BTRFS_ORDERED_NOCOW, &ordered->flags))
btrfs_free_reserved_extent(root, ordered->start,
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index f1c9bb4..f87552a 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -947,23 +947,42 @@
static noinline int btrfs_ioctl_snap_create(struct file *file,
void __user *arg, int subvol,
- int async)
+ int v2)
{
struct btrfs_ioctl_vol_args *vol_args = NULL;
- struct btrfs_ioctl_async_vol_args *async_vol_args = NULL;
+ struct btrfs_ioctl_vol_args_v2 *vol_args_v2 = NULL;
char *name;
u64 fd;
- u64 transid = 0;
int ret;
- if (async) {
- async_vol_args = memdup_user(arg, sizeof(*async_vol_args));
- if (IS_ERR(async_vol_args))
- return PTR_ERR(async_vol_args);
+ if (v2) {
+ u64 transid = 0;
+ u64 *ptr = NULL;
- name = async_vol_args->name;
- fd = async_vol_args->fd;
- async_vol_args->name[BTRFS_SNAPSHOT_NAME_MAX] = '\0';
+ vol_args_v2 = memdup_user(arg, sizeof(*vol_args_v2));
+ if (IS_ERR(vol_args_v2))
+ return PTR_ERR(vol_args_v2);
+
+ if (vol_args_v2->flags & ~BTRFS_SUBVOL_CREATE_ASYNC) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ name = vol_args_v2->name;
+ fd = vol_args_v2->fd;
+ vol_args_v2->name[BTRFS_SUBVOL_NAME_MAX] = '\0';
+
+ if (vol_args_v2->flags & BTRFS_SUBVOL_CREATE_ASYNC)
+ ptr = &transid;
+
+ ret = btrfs_ioctl_snap_create_transid(file, name, fd,
+ subvol, ptr);
+
+ if (ret == 0 && ptr &&
+ copy_to_user(arg +
+ offsetof(struct btrfs_ioctl_vol_args_v2,
+ transid), ptr, sizeof(*ptr)))
+ ret = -EFAULT;
} else {
vol_args = memdup_user(arg, sizeof(*vol_args));
if (IS_ERR(vol_args))
@@ -971,20 +990,13 @@
name = vol_args->name;
fd = vol_args->fd;
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
+
+ ret = btrfs_ioctl_snap_create_transid(file, name, fd,
+ subvol, NULL);
}
-
- ret = btrfs_ioctl_snap_create_transid(file, name, fd,
- subvol, &transid);
-
- if (!ret && async) {
- if (copy_to_user(arg +
- offsetof(struct btrfs_ioctl_async_vol_args,
- transid), &transid, sizeof(transid)))
- return -EFAULT;
- }
-
+out:
kfree(vol_args);
- kfree(async_vol_args);
+ kfree(vol_args_v2);
return ret;
}
@@ -2246,7 +2258,7 @@
return btrfs_ioctl_getversion(file, argp);
case BTRFS_IOC_SNAP_CREATE:
return btrfs_ioctl_snap_create(file, argp, 0, 0);
- case BTRFS_IOC_SNAP_CREATE_ASYNC:
+ case BTRFS_IOC_SNAP_CREATE_V2:
return btrfs_ioctl_snap_create(file, argp, 0, 1);
case BTRFS_IOC_SUBVOL_CREATE:
return btrfs_ioctl_snap_create(file, argp, 1, 0);
diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h
index 17c99eb..c344d12 100644
--- a/fs/btrfs/ioctl.h
+++ b/fs/btrfs/ioctl.h
@@ -30,11 +30,15 @@
char name[BTRFS_PATH_NAME_MAX + 1];
};
-#define BTRFS_SNAPSHOT_NAME_MAX 4079
-struct btrfs_ioctl_async_vol_args {
+#define BTRFS_SUBVOL_CREATE_ASYNC (1ULL << 0)
+
+#define BTRFS_SUBVOL_NAME_MAX 4039
+struct btrfs_ioctl_vol_args_v2 {
__s64 fd;
__u64 transid;
- char name[BTRFS_SNAPSHOT_NAME_MAX + 1];
+ __u64 flags;
+ __u64 unused[4];
+ char name[BTRFS_SUBVOL_NAME_MAX + 1];
};
#define BTRFS_INO_LOOKUP_PATH_MAX 4080
@@ -187,6 +191,6 @@
struct btrfs_ioctl_space_args)
#define BTRFS_IOC_START_SYNC _IOR(BTRFS_IOCTL_MAGIC, 24, __u64)
#define BTRFS_IOC_WAIT_SYNC _IOW(BTRFS_IOCTL_MAGIC, 22, __u64)
-#define BTRFS_IOC_SNAP_CREATE_ASYNC _IOW(BTRFS_IOCTL_MAGIC, 23, \
- struct btrfs_ioctl_async_vol_args)
+#define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \
+ struct btrfs_ioctl_vol_args_v2)
#endif
diff --git a/fs/btrfs/orphan.c b/fs/btrfs/orphan.c
index 79cba5f..f8be250 100644
--- a/fs/btrfs/orphan.c
+++ b/fs/btrfs/orphan.c
@@ -56,8 +56,12 @@
return -ENOMEM;
ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
- if (ret)
+ if (ret < 0)
goto out;
+ if (ret) {
+ ret = -ENOENT;
+ goto out;
+ }
ret = btrfs_del_item(trans, root, path);
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index dbb51ea..883c6fa 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -685,9 +685,9 @@
mutex_unlock(&root->d_inode->i_mutex);
if (IS_ERR(new_root)) {
+ dput(root);
deactivate_locked_super(s);
error = PTR_ERR(new_root);
- dput(root);
goto error_free_subvol_name;
}
if (!new_root->d_inode) {
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index cc04dc1..6b98845 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -412,12 +412,16 @@
device->fs_devices = fs_devices;
fs_devices->num_devices++;
- } else if (strcmp(device->name, path)) {
+ } else if (!device->name || strcmp(device->name, path)) {
name = kstrdup(path, GFP_NOFS);
if (!name)
return -ENOMEM;
kfree(device->name);
device->name = name;
+ if (device->missing) {
+ fs_devices->missing_devices--;
+ device->missing = 0;
+ }
}
if (found_transid > fs_devices->latest_trans) {
@@ -1236,6 +1240,9 @@
device->fs_devices->num_devices--;
+ if (device->missing)
+ root->fs_info->fs_devices->missing_devices--;
+
next_device = list_entry(root->fs_info->fs_devices->devices.next,
struct btrfs_device, dev_list);
if (device->bdev == root->fs_info->sb->s_bdev)
@@ -3080,7 +3087,9 @@
device->devid = devid;
device->work.func = pending_bios_fn;
device->fs_devices = fs_devices;
+ device->missing = 1;
fs_devices->num_devices++;
+ fs_devices->missing_devices++;
spin_lock_init(&device->io_lock);
INIT_LIST_HEAD(&device->dev_alloc_list);
memcpy(device->uuid, dev_uuid, BTRFS_UUID_SIZE);
@@ -3278,6 +3287,15 @@
device = add_missing_dev(root, devid, dev_uuid);
if (!device)
return -ENOMEM;
+ } else if (!device->missing) {
+ /*
+ * this happens when a device that was properly setup
+ * in the device info lists suddenly goes bad.
+ * device->bdev is NULL, and so we have to set
+ * device->missing to one here
+ */
+ root->fs_info->fs_devices->missing_devices++;
+ device->missing = 1;
}
}
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index 2b638b6..2740db49 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -44,6 +44,7 @@
int writeable;
int in_fs_metadata;
+ int missing;
spinlock_t io_lock;
@@ -93,6 +94,7 @@
u64 num_devices;
u64 open_devices;
u64 rw_devices;
+ u64 missing_devices;
u64 total_rw_bytes;
struct block_device *latest_bdev;
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 7d447af..158c700 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -114,8 +114,8 @@
spin_lock(&dcache_lock);
/* start at beginning? */
- if (filp->f_pos == 2 || (last &&
- filp->f_pos < ceph_dentry(last)->offset)) {
+ if (filp->f_pos == 2 || last == NULL ||
+ filp->f_pos < ceph_dentry(last)->offset) {
if (list_empty(&parent->d_subdirs))
goto out_unlock;
p = parent->d_subdirs.prev;
diff --git a/fs/ceph/ioctl.h b/fs/ceph/ioctl.h
index a6ce54e..52e8fd7 100644
--- a/fs/ceph/ioctl.h
+++ b/fs/ceph/ioctl.h
@@ -4,7 +4,7 @@
#include <linux/ioctl.h>
#include <linux/types.h>
-#define CEPH_IOCTL_MAGIC 0x98
+#define CEPH_IOCTL_MAGIC 0x97
/* just use u64 to align sanely on all archs */
struct ceph_ioctl_layout {
diff --git a/fs/ceph/locks.c b/fs/ceph/locks.c
index 40abde9..476b329 100644
--- a/fs/ceph/locks.c
+++ b/fs/ceph/locks.c
@@ -11,40 +11,68 @@
* Implement fcntl and flock locking functions.
*/
static int ceph_lock_message(u8 lock_type, u16 operation, struct file *file,
- u64 pid, u64 pid_ns,
- int cmd, u64 start, u64 length, u8 wait)
+ int cmd, u8 wait, struct file_lock *fl)
{
struct inode *inode = file->f_dentry->d_inode;
struct ceph_mds_client *mdsc =
ceph_sb_to_client(inode->i_sb)->mdsc;
struct ceph_mds_request *req;
int err;
+ u64 length = 0;
req = ceph_mdsc_create_request(mdsc, operation, USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
req->r_inode = igrab(inode);
+ /* mds requires start and length rather than start and end */
+ if (LLONG_MAX == fl->fl_end)
+ length = 0;
+ else
+ length = fl->fl_end - fl->fl_start + 1;
+
dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
"length: %llu, wait: %d, type`: %d", (int)lock_type,
- (int)operation, pid, start, length, wait, cmd);
+ (int)operation, (u64)fl->fl_pid, fl->fl_start,
+ length, wait, fl->fl_type);
+
req->r_args.filelock_change.rule = lock_type;
req->r_args.filelock_change.type = cmd;
- req->r_args.filelock_change.pid = cpu_to_le64(pid);
+ req->r_args.filelock_change.pid = cpu_to_le64((u64)fl->fl_pid);
/* This should be adjusted, but I'm not sure if
namespaces actually get id numbers*/
req->r_args.filelock_change.pid_namespace =
- cpu_to_le64((u64)pid_ns);
- req->r_args.filelock_change.start = cpu_to_le64(start);
+ cpu_to_le64((u64)(unsigned long)fl->fl_nspid);
+ req->r_args.filelock_change.start = cpu_to_le64(fl->fl_start);
req->r_args.filelock_change.length = cpu_to_le64(length);
req->r_args.filelock_change.wait = wait;
err = ceph_mdsc_do_request(mdsc, inode, req);
+
+ if ( operation == CEPH_MDS_OP_GETFILELOCK){
+ fl->fl_pid = le64_to_cpu(req->r_reply_info.filelock_reply->pid);
+ if (CEPH_LOCK_SHARED == req->r_reply_info.filelock_reply->type)
+ fl->fl_type = F_RDLCK;
+ else if (CEPH_LOCK_EXCL == req->r_reply_info.filelock_reply->type)
+ fl->fl_type = F_WRLCK;
+ else
+ fl->fl_type = F_UNLCK;
+
+ fl->fl_start = le64_to_cpu(req->r_reply_info.filelock_reply->start);
+ length = le64_to_cpu(req->r_reply_info.filelock_reply->start) +
+ le64_to_cpu(req->r_reply_info.filelock_reply->length);
+ if (length >= 1)
+ fl->fl_end = length -1;
+ else
+ fl->fl_end = 0;
+
+ }
ceph_mdsc_put_request(req);
dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
- "length: %llu, wait: %d, type`: %d err code %d", (int)lock_type,
- (int)operation, pid, start, length, wait, cmd, err);
+ "length: %llu, wait: %d, type`: %d, err code %d", (int)lock_type,
+ (int)operation, (u64)fl->fl_pid, fl->fl_start,
+ length, wait, fl->fl_type, err);
return err;
}
@@ -54,7 +82,6 @@
*/
int ceph_lock(struct file *file, int cmd, struct file_lock *fl)
{
- u64 length;
u8 lock_cmd;
int err;
u8 wait = 0;
@@ -76,29 +103,20 @@
else
lock_cmd = CEPH_LOCK_UNLOCK;
- if (LLONG_MAX == fl->fl_end)
- length = 0;
- else
- length = fl->fl_end - fl->fl_start + 1;
-
- err = ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
- (u64)fl->fl_pid,
- (u64)(unsigned long)fl->fl_nspid,
- lock_cmd, fl->fl_start,
- length, wait);
+ err = ceph_lock_message(CEPH_LOCK_FCNTL, op, file, lock_cmd, wait, fl);
if (!err) {
- dout("mds locked, locking locally");
- err = posix_lock_file(file, fl, NULL);
- if (err && (CEPH_MDS_OP_SETFILELOCK == op)) {
- /* undo! This should only happen if the kernel detects
- * local deadlock. */
- ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
- (u64)fl->fl_pid,
- (u64)(unsigned long)fl->fl_nspid,
- CEPH_LOCK_UNLOCK, fl->fl_start,
- length, 0);
- dout("got %d on posix_lock_file, undid lock", err);
+ if ( op != CEPH_MDS_OP_GETFILELOCK ){
+ dout("mds locked, locking locally");
+ err = posix_lock_file(file, fl, NULL);
+ if (err && (CEPH_MDS_OP_SETFILELOCK == op)) {
+ /* undo! This should only happen if the kernel detects
+ * local deadlock. */
+ ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
+ CEPH_LOCK_UNLOCK, 0, fl);
+ dout("got %d on posix_lock_file, undid lock", err);
+ }
}
+
} else {
dout("mds returned error code %d", err);
}
@@ -107,7 +125,6 @@
int ceph_flock(struct file *file, int cmd, struct file_lock *fl)
{
- u64 length;
u8 lock_cmd;
int err;
u8 wait = 1;
@@ -127,26 +144,15 @@
lock_cmd = CEPH_LOCK_EXCL;
else
lock_cmd = CEPH_LOCK_UNLOCK;
- /* mds requires start and length rather than start and end */
- if (LLONG_MAX == fl->fl_end)
- length = 0;
- else
- length = fl->fl_end - fl->fl_start + 1;
err = ceph_lock_message(CEPH_LOCK_FLOCK, CEPH_MDS_OP_SETFILELOCK,
- file, (u64)fl->fl_pid,
- (u64)(unsigned long)fl->fl_nspid,
- lock_cmd, fl->fl_start,
- length, wait);
+ file, lock_cmd, wait, fl);
if (!err) {
err = flock_lock_file_wait(file, fl);
if (err) {
ceph_lock_message(CEPH_LOCK_FLOCK,
CEPH_MDS_OP_SETFILELOCK,
- file, (u64)fl->fl_pid,
- (u64)(unsigned long)fl->fl_nspid,
- CEPH_LOCK_UNLOCK, fl->fl_start,
- length, 0);
+ file, CEPH_LOCK_UNLOCK, 0, fl);
dout("got %d on flock_lock_file_wait, undid lock", err);
}
} else {
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 098b185..38800ea 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -202,6 +202,38 @@
}
/*
+ * parse fcntl F_GETLK results
+ */
+static int parse_reply_info_filelock(void **p, void *end,
+ struct ceph_mds_reply_info_parsed *info)
+{
+ if (*p + sizeof(*info->filelock_reply) > end)
+ goto bad;
+
+ info->filelock_reply = *p;
+ *p += sizeof(*info->filelock_reply);
+
+ if (unlikely(*p != end))
+ goto bad;
+ return 0;
+
+bad:
+ return -EIO;
+}
+
+/*
+ * parse extra results
+ */
+static int parse_reply_info_extra(void **p, void *end,
+ struct ceph_mds_reply_info_parsed *info)
+{
+ if (info->head->op == CEPH_MDS_OP_GETFILELOCK)
+ return parse_reply_info_filelock(p, end, info);
+ else
+ return parse_reply_info_dir(p, end, info);
+}
+
+/*
* parse entire mds reply
*/
static int parse_reply_info(struct ceph_msg *msg,
@@ -223,10 +255,10 @@
goto out_bad;
}
- /* dir content */
+ /* extra */
ceph_decode_32_safe(&p, end, len, bad);
if (len > 0) {
- err = parse_reply_info_dir(&p, p+len, info);
+ err = parse_reply_info_extra(&p, p+len, info);
if (err < 0)
goto out_bad;
}
@@ -2074,7 +2106,7 @@
mutex_lock(&session->s_mutex);
if (err < 0) {
- pr_err("mdsc_handle_reply got corrupt reply mds%d\n", mds);
+ pr_err("mdsc_handle_reply got corrupt reply mds%d(tid:%lld)\n", mds, tid);
ceph_msg_dump(msg);
goto out_err;
}
@@ -2094,7 +2126,8 @@
mutex_lock(&req->r_fill_mutex);
err = ceph_fill_trace(mdsc->fsc->sb, req, req->r_session);
if (err == 0) {
- if (result == 0 && rinfo->dir_nr)
+ if (result == 0 && req->r_op != CEPH_MDS_OP_GETFILELOCK &&
+ rinfo->dir_nr)
ceph_readdir_prepopulate(req, req->r_session);
ceph_unreserve_caps(mdsc, &req->r_caps_reservation);
}
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index 9341fd4..aabe563 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -42,26 +42,37 @@
};
/*
- * parsed info about an mds reply, including information about the
- * target inode and/or its parent directory and dentry, and directory
- * contents (for readdir results).
+ * parsed info about an mds reply, including information about
+ * either: 1) the target inode and/or its parent directory and dentry,
+ * and directory contents (for readdir results), or
+ * 2) the file range lock info (for fcntl F_GETLK results).
*/
struct ceph_mds_reply_info_parsed {
struct ceph_mds_reply_head *head;
+ /* trace */
struct ceph_mds_reply_info_in diri, targeti;
struct ceph_mds_reply_dirfrag *dirfrag;
char *dname;
u32 dname_len;
struct ceph_mds_reply_lease *dlease;
- struct ceph_mds_reply_dirfrag *dir_dir;
- int dir_nr;
- char **dir_dname;
- u32 *dir_dname_len;
- struct ceph_mds_reply_lease **dir_dlease;
- struct ceph_mds_reply_info_in *dir_in;
- u8 dir_complete, dir_end;
+ /* extra */
+ union {
+ /* for fcntl F_GETLK results */
+ struct ceph_filelock *filelock_reply;
+
+ /* for readdir results */
+ struct {
+ struct ceph_mds_reply_dirfrag *dir_dir;
+ int dir_nr;
+ char **dir_dname;
+ u32 *dir_dname_len;
+ struct ceph_mds_reply_lease **dir_dlease;
+ struct ceph_mds_reply_info_in *dir_in;
+ u8 dir_complete, dir_end;
+ };
+ };
/* encoded blob describing snapshot contexts for certain
operations (e.g., open) */
diff --git a/fs/cifs/Makefile b/fs/cifs/Makefile
index adefa60..43b19dd 100644
--- a/fs/cifs/Makefile
+++ b/fs/cifs/Makefile
@@ -6,7 +6,9 @@
cifs-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o \
link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o \
md4.o md5.o cifs_unicode.o nterr.o xattr.o cifsencrypt.o \
- readdir.o ioctl.o sess.o export.o cifsacl.o
+ readdir.o ioctl.o sess.o export.o
+
+cifs-$(CONFIG_CIFS_ACL) += cifsacl.o
cifs-$(CONFIG_CIFS_UPCALL) += cifs_spnego.o
diff --git a/fs/cifs/README b/fs/cifs/README
index ee68d10..46af99a 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -337,6 +337,15 @@
wsize default write size (default 57344)
maximum wsize currently allowed by CIFS is 57344 (fourteen
4096 byte pages)
+ actimeo=n attribute cache timeout in seconds (default 1 second).
+ After this timeout, the cifs client requests fresh attribute
+ information from the server. This option allows to tune the
+ attribute cache timeout to suit the workload needs. Shorter
+ timeouts mean better the cache coherency, but increased number
+ of calls to the server. Longer timeouts mean reduced number
+ of calls to the server at the expense of less stricter cache
+ coherency checks (i.e. incorrect attribute cache for a short
+ period of time).
rw mount the network share read-write (note that the
server may still consider the share read-only)
ro mount network share read-only
diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h
index e9a393c..7852cd6 100644
--- a/fs/cifs/cifs_fs_sb.h
+++ b/fs/cifs/cifs_fs_sb.h
@@ -48,6 +48,7 @@
struct nls_table *local_nls;
unsigned int rsize;
unsigned int wsize;
+ unsigned long actimeo; /* attribute cache timeout (jiffies) */
atomic_t active;
uid_t mnt_uid;
gid_t mnt_gid;
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index c6ebea0..a437ec3 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -30,8 +30,6 @@
#include "cifs_debug.h"
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-
static struct cifs_wksid wksidarr[NUM_WK_SIDS] = {
{{1, 0, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0} }, "null user"},
{{1, 1, {0, 0, 0, 0, 0, 1}, {0, 0, 0, 0, 0} }, "nobody"},
@@ -774,4 +772,3 @@
return rc;
}
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
diff --git a/fs/cifs/cifsacl.h b/fs/cifs/cifsacl.h
index 6c8096c..c4ae7d0 100644
--- a/fs/cifs/cifsacl.h
+++ b/fs/cifs/cifsacl.h
@@ -74,11 +74,7 @@
char sidname[SIDNAMELENGTH];
} __attribute__((packed));
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-
extern int match_sid(struct cifs_sid *);
extern int compare_sids(const struct cifs_sid *, const struct cifs_sid *);
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
-
#endif /* _CIFSACL_H */
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 76c8a90..3936aa7 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -463,6 +463,8 @@
seq_printf(s, ",rsize=%d", cifs_sb->rsize);
seq_printf(s, ",wsize=%d", cifs_sb->wsize);
+ /* convert actimeo and display it in seconds */
+ seq_printf(s, ",actimeo=%lu", cifs_sb->actimeo / HZ);
return 0;
}
@@ -935,7 +937,6 @@
GlobalCurrentXid = 0;
GlobalTotalActiveXid = 0;
GlobalMaxActiveXid = 0;
- memset(Local_System_Name, 0, 15);
spin_lock_init(&cifs_tcp_ses_lock);
spin_lock_init(&cifs_file_list_lock);
spin_lock_init(&GlobalMid_Lock);
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index b577bf0..7136c0c 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -45,6 +45,16 @@
#define CIFS_MIN_RCV_POOL 4
/*
+ * default attribute cache timeout (jiffies)
+ */
+#define CIFS_DEF_ACTIMEO (1 * HZ)
+
+/*
+ * max attribute cache timeout (jiffies) - 2^30
+ */
+#define CIFS_MAX_ACTIMEO (1 << 30)
+
+/*
* MAX_REQ is the maximum number of requests that WE will send
* on one socket concurrently. It also matches the most common
* value of max multiplex returned by servers. We may
@@ -746,8 +756,6 @@
GLOBAL_EXTERN unsigned int GlobalMaxActiveXid; /* prot by GlobalMid_Sem */
GLOBAL_EXTERN spinlock_t GlobalMid_Lock; /* protects above & list operations */
/* on midQ entries */
-GLOBAL_EXTERN char Local_System_Name[15];
-
/*
* Global counters, updated atomically
*/
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index db961dc..e6d1481 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -54,7 +54,8 @@
__func__, curr_xid, (int)rc); \
} while (0)
extern char *build_path_from_dentry(struct dentry *);
-extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb);
+extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb,
+ struct cifsTconInfo *tcon);
extern char *build_wildcard_path_from_dentry(struct dentry *direntry);
extern char *cifs_compose_mount_options(const char *sb_mountdata,
const char *fullpath, const struct dfs_info3_param *ref,
@@ -79,9 +80,7 @@
struct TCP_Server_Info *);
extern bool is_size_safe_to_change(struct cifsInodeInfo *, __u64 eof);
extern struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *, bool);
-#ifdef CONFIG_CIFS_EXPERIMENTAL
extern struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *, bool);
-#endif
extern unsigned int smbCalcSize(struct smb_hdr *ptr);
extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
extern int decode_negTokenInit(unsigned char *security_blob, int length,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 2f2632b..67acfb3 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2478,95 +2478,6 @@
}
#ifdef CONFIG_CIFS_EXPERIMENTAL
-/* Initialize NT TRANSACT SMB into small smb request buffer.
- This assumes that all NT TRANSACTS that we init here have
- total parm and data under about 400 bytes (to fit in small cifs
- buffer size), which is the case so far, it easily fits. NB:
- Setup words themselves and ByteCount
- MaxSetupCount (size of returned setup area) and
- MaxParameterCount (returned parms size) must be set by caller */
-static int
-smb_init_nttransact(const __u16 sub_command, const int setup_count,
- const int parm_len, struct cifsTconInfo *tcon,
- void **ret_buf)
-{
- int rc;
- __u32 temp_offset;
- struct smb_com_ntransact_req *pSMB;
-
- rc = small_smb_init(SMB_COM_NT_TRANSACT, 19 + setup_count, tcon,
- (void **)&pSMB);
- if (rc)
- return rc;
- *ret_buf = (void *)pSMB;
- pSMB->Reserved = 0;
- pSMB->TotalParameterCount = cpu_to_le32(parm_len);
- pSMB->TotalDataCount = 0;
- pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
- MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
- pSMB->ParameterCount = pSMB->TotalParameterCount;
- pSMB->DataCount = pSMB->TotalDataCount;
- temp_offset = offsetof(struct smb_com_ntransact_req, Parms) +
- (setup_count * 2) - 4 /* for rfc1001 length itself */;
- pSMB->ParameterOffset = cpu_to_le32(temp_offset);
- pSMB->DataOffset = cpu_to_le32(temp_offset + parm_len);
- pSMB->SetupCount = setup_count; /* no need to le convert byte fields */
- pSMB->SubCommand = cpu_to_le16(sub_command);
- return 0;
-}
-
-static int
-validate_ntransact(char *buf, char **ppparm, char **ppdata,
- __u32 *pparmlen, __u32 *pdatalen)
-{
- char *end_of_smb;
- __u32 data_count, data_offset, parm_count, parm_offset;
- struct smb_com_ntransact_rsp *pSMBr;
-
- *pdatalen = 0;
- *pparmlen = 0;
-
- if (buf == NULL)
- return -EINVAL;
-
- pSMBr = (struct smb_com_ntransact_rsp *)buf;
-
- /* ByteCount was converted from little endian in SendReceive */
- end_of_smb = 2 /* sizeof byte count */ + pSMBr->ByteCount +
- (char *)&pSMBr->ByteCount;
-
- data_offset = le32_to_cpu(pSMBr->DataOffset);
- data_count = le32_to_cpu(pSMBr->DataCount);
- parm_offset = le32_to_cpu(pSMBr->ParameterOffset);
- parm_count = le32_to_cpu(pSMBr->ParameterCount);
-
- *ppparm = (char *)&pSMBr->hdr.Protocol + parm_offset;
- *ppdata = (char *)&pSMBr->hdr.Protocol + data_offset;
-
- /* should we also check that parm and data areas do not overlap? */
- if (*ppparm > end_of_smb) {
- cFYI(1, "parms start after end of smb");
- return -EINVAL;
- } else if (parm_count + *ppparm > end_of_smb) {
- cFYI(1, "parm end after end of smb");
- return -EINVAL;
- } else if (*ppdata > end_of_smb) {
- cFYI(1, "data starts after end of smb");
- return -EINVAL;
- } else if (data_count + *ppdata > end_of_smb) {
- cFYI(1, "data %p + count %d (%p) past smb end %p start %p",
- *ppdata, data_count, (data_count + *ppdata),
- end_of_smb, pSMBr);
- return -EINVAL;
- } else if (parm_count + data_count > pSMBr->ByteCount) {
- cFYI(1, "parm count and data count larger than SMB");
- return -EINVAL;
- }
- *pdatalen = data_count;
- *pparmlen = parm_count;
- return 0;
-}
-
int
CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName,
@@ -3056,7 +2967,97 @@
#endif /* CONFIG_POSIX */
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CONFIG_CIFS_ACL
+/*
+ * Initialize NT TRANSACT SMB into small smb request buffer. This assumes that
+ * all NT TRANSACTS that we init here have total parm and data under about 400
+ * bytes (to fit in small cifs buffer size), which is the case so far, it
+ * easily fits. NB: Setup words themselves and ByteCount MaxSetupCount (size of
+ * returned setup area) and MaxParameterCount (returned parms size) must be set
+ * by caller
+ */
+static int
+smb_init_nttransact(const __u16 sub_command, const int setup_count,
+ const int parm_len, struct cifsTconInfo *tcon,
+ void **ret_buf)
+{
+ int rc;
+ __u32 temp_offset;
+ struct smb_com_ntransact_req *pSMB;
+
+ rc = small_smb_init(SMB_COM_NT_TRANSACT, 19 + setup_count, tcon,
+ (void **)&pSMB);
+ if (rc)
+ return rc;
+ *ret_buf = (void *)pSMB;
+ pSMB->Reserved = 0;
+ pSMB->TotalParameterCount = cpu_to_le32(parm_len);
+ pSMB->TotalDataCount = 0;
+ pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
+ MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
+ pSMB->ParameterCount = pSMB->TotalParameterCount;
+ pSMB->DataCount = pSMB->TotalDataCount;
+ temp_offset = offsetof(struct smb_com_ntransact_req, Parms) +
+ (setup_count * 2) - 4 /* for rfc1001 length itself */;
+ pSMB->ParameterOffset = cpu_to_le32(temp_offset);
+ pSMB->DataOffset = cpu_to_le32(temp_offset + parm_len);
+ pSMB->SetupCount = setup_count; /* no need to le convert byte fields */
+ pSMB->SubCommand = cpu_to_le16(sub_command);
+ return 0;
+}
+
+static int
+validate_ntransact(char *buf, char **ppparm, char **ppdata,
+ __u32 *pparmlen, __u32 *pdatalen)
+{
+ char *end_of_smb;
+ __u32 data_count, data_offset, parm_count, parm_offset;
+ struct smb_com_ntransact_rsp *pSMBr;
+
+ *pdatalen = 0;
+ *pparmlen = 0;
+
+ if (buf == NULL)
+ return -EINVAL;
+
+ pSMBr = (struct smb_com_ntransact_rsp *)buf;
+
+ /* ByteCount was converted from little endian in SendReceive */
+ end_of_smb = 2 /* sizeof byte count */ + pSMBr->ByteCount +
+ (char *)&pSMBr->ByteCount;
+
+ data_offset = le32_to_cpu(pSMBr->DataOffset);
+ data_count = le32_to_cpu(pSMBr->DataCount);
+ parm_offset = le32_to_cpu(pSMBr->ParameterOffset);
+ parm_count = le32_to_cpu(pSMBr->ParameterCount);
+
+ *ppparm = (char *)&pSMBr->hdr.Protocol + parm_offset;
+ *ppdata = (char *)&pSMBr->hdr.Protocol + data_offset;
+
+ /* should we also check that parm and data areas do not overlap? */
+ if (*ppparm > end_of_smb) {
+ cFYI(1, "parms start after end of smb");
+ return -EINVAL;
+ } else if (parm_count + *ppparm > end_of_smb) {
+ cFYI(1, "parm end after end of smb");
+ return -EINVAL;
+ } else if (*ppdata > end_of_smb) {
+ cFYI(1, "data starts after end of smb");
+ return -EINVAL;
+ } else if (data_count + *ppdata > end_of_smb) {
+ cFYI(1, "data %p + count %d (%p) past smb end %p start %p",
+ *ppdata, data_count, (data_count + *ppdata),
+ end_of_smb, pSMBr);
+ return -EINVAL;
+ } else if (parm_count + data_count > pSMBr->ByteCount) {
+ cFYI(1, "parm count and data count larger than SMB");
+ return -EINVAL;
+ }
+ *pdatalen = data_count;
+ *pparmlen = parm_count;
+ return 0;
+}
+
/* Get Security Descriptor (by handle) from remote server for a file or dir */
int
CIFSSMBGetCIFSACL(const int xid, struct cifsTconInfo *tcon, __u16 fid,
@@ -3214,7 +3215,7 @@
return (rc);
}
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
+#endif /* CONFIG_CIFS_ACL */
/* Legacy Query Path Information call for lookup to old servers such
as Win9x/WinME */
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 32fa4d9..cc1a860 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -105,6 +105,7 @@
unsigned int wsize;
bool sockopt_tcp_nodelay:1;
unsigned short int port;
+ unsigned long actimeo; /* attribute cache timeout (jiffies) */
char *prepath;
struct sockaddr_storage srcaddr; /* allow binding to a local IP */
struct nls_table *local_nls;
@@ -806,23 +807,20 @@
short int override_gid = -1;
bool uid_specified = false;
bool gid_specified = false;
+ char *nodename = utsname()->nodename;
separator[0] = ',';
separator[1] = 0;
- if (Local_System_Name[0] != 0)
- memcpy(vol->source_rfc1001_name, Local_System_Name, 15);
- else {
- char *nodename = utsname()->nodename;
- int n = strnlen(nodename, 15);
- memset(vol->source_rfc1001_name, 0x20, 15);
- for (i = 0; i < n; i++) {
- /* does not have to be perfect mapping since field is
- informational, only used for servers that do not support
- port 445 and it can be overridden at mount time */
- vol->source_rfc1001_name[i] = toupper(nodename[i]);
- }
- }
+ /*
+ * does not have to be perfect mapping since field is
+ * informational, only used for servers that do not support
+ * port 445 and it can be overridden at mount time
+ */
+ memset(vol->source_rfc1001_name, 0x20, 15);
+ for (i = 0; i < strnlen(nodename, 15); i++)
+ vol->source_rfc1001_name[i] = toupper(nodename[i]);
+
vol->source_rfc1001_name[15] = 0;
/* null target name indicates to use *SMBSERVR default called name
if we end up sending RFC1001 session initialize */
@@ -840,6 +838,8 @@
/* default to using server inode numbers where available */
vol->server_ino = 1;
+ vol->actimeo = CIFS_DEF_ACTIMEO;
+
if (!options)
return 1;
@@ -1214,6 +1214,16 @@
printk(KERN_WARNING "CIFS: server net"
"biosname longer than 15 truncated.\n");
}
+ } else if (strnicmp(data, "actimeo", 7) == 0) {
+ if (value && *value) {
+ vol->actimeo = HZ * simple_strtoul(value,
+ &value, 0);
+ if (vol->actimeo > CIFS_MAX_ACTIMEO) {
+ cERROR(1, "CIFS: attribute cache"
+ "timeout too large");
+ return 1;
+ }
+ }
} else if (strnicmp(data, "credentials", 4) == 0) {
/* ignore */
} else if (strnicmp(data, "version", 3) == 0) {
@@ -2571,6 +2581,8 @@
cFYI(1, "file mode: 0x%x dir mode: 0x%x",
cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode);
+ cifs_sb->actimeo = pvolume_info->actimeo;
+
if (pvolume_info->noperm)
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM;
if (pvolume_info->setuids)
@@ -2821,13 +2833,13 @@
/* check if a whole path (including prepath) is not remote */
if (!rc && cifs_sb->prepathlen && tcon) {
/* build_path_to_root works only when we have a valid tcon */
- full_path = cifs_build_path_to_root(cifs_sb);
+ full_path = cifs_build_path_to_root(cifs_sb, tcon);
if (full_path == NULL) {
rc = -ENOMEM;
goto mount_fail_check;
}
rc = is_path_accessible(xid, tcon, cifs_sb, full_path);
- if (rc != -EREMOTE) {
+ if (rc != 0 && rc != -EREMOTE) {
kfree(full_path);
goto mount_fail_check;
}
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index b857ce5..5a28660 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1108,7 +1108,6 @@
return total_written;
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *cifs_inode,
bool fsuid_only)
{
@@ -1142,7 +1141,6 @@
spin_unlock(&cifs_file_list_lock);
return NULL;
}
-#endif
struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *cifs_inode,
bool fsuid_only)
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 28cb6e7..589f3e3 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -686,7 +686,7 @@
cFYI(1, "cifs_sfu_type failed: %d", tmprc);
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CONFIG_CIFS_ACL
/* fill in 0777 bits from ACL */
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
rc = cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path,
@@ -697,7 +697,7 @@
goto cgii_exit;
}
}
-#endif
+#endif /* CONFIG_CIFS_ACL */
/* fill in remaining high mode bits e.g. SUID, VTX */
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
@@ -728,12 +728,12 @@
.lookup = cifs_lookup,
};
-char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb)
+char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb,
+ struct cifsTconInfo *tcon)
{
int pplen = cifs_sb->prepathlen;
int dfsplen;
char *full_path = NULL;
- struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb);
/* if no prefix path, simply set path to the root of share to "" */
if (pplen == 0) {
@@ -875,7 +875,7 @@
char *full_path;
struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb);
- full_path = cifs_build_path_to_root(cifs_sb);
+ full_path = cifs_build_path_to_root(cifs_sb, tcon);
if (full_path == NULL)
return ERR_PTR(-ENOMEM);
@@ -1653,6 +1653,7 @@
cifs_inode_needs_reval(struct inode *inode)
{
struct cifsInodeInfo *cifs_i = CIFS_I(inode);
+ struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
if (cifs_i->clientCanCacheRead)
return false;
@@ -1663,12 +1664,12 @@
if (cifs_i->time == 0)
return true;
- /* FIXME: the actimeo should be tunable */
- if (time_after_eq(jiffies, cifs_i->time + HZ))
+ if (!time_in_range(jiffies, cifs_i->time,
+ cifs_i->time + cifs_sb->actimeo))
return true;
/* hardlinked files w/ noserverino get "special" treatment */
- if (!(CIFS_SB(inode->i_sb)->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) &&
+ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) &&
S_ISREG(inode->i_mode) && inode->i_nlink != 1)
return true;
@@ -2121,7 +2122,7 @@
if (attrs->ia_valid & ATTR_MODE) {
rc = 0;
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CONFIG_CIFS_ACL
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
rc = mode_to_cifs_acl(inode, full_path, mode);
if (rc) {
@@ -2130,7 +2131,7 @@
goto cifs_setattr_exit;
}
} else
-#endif
+#endif /* CONFIG_CIFS_ACL */
if (((mode & S_IWUGO) == 0) &&
(cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 32d300e..a73eb9f 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -759,18 +759,6 @@
rc = filldir(direntry, qstring.name, qstring.len, file->f_pos,
ino, fattr.cf_dtype);
- /*
- * we can not return filldir errors to the caller since they are
- * "normal" when the stat blocksize is too small - we return remapped
- * error instead
- *
- * FIXME: This looks bogus. filldir returns -EOVERFLOW in the above
- * case already. Why should we be clobbering other errors from it?
- */
- if (rc) {
- cFYI(1, "filldir rc = %d", rc);
- rc = -EOVERFLOW;
- }
dput(tmp_dentry);
return rc;
}
diff --git a/fs/exec.c b/fs/exec.c
index d68c378..c62efcb 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -275,6 +275,11 @@
vma->vm_flags = VM_STACK_FLAGS | VM_STACK_INCOMPLETE_SETUP;
vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
INIT_LIST_HEAD(&vma->anon_vma_chain);
+
+ err = security_file_mmap(NULL, 0, 0, 0, vma->vm_start, 1);
+ if (err)
+ goto err;
+
err = insert_vm_struct(mm, vma);
if (err)
goto err;
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 6a5edea..94ce3d7 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -910,6 +910,7 @@
#define EXT4_MOUNT_JOURNAL_CHECKSUM 0x800000 /* Journal checksums */
#define EXT4_MOUNT_JOURNAL_ASYNC_COMMIT 0x1000000 /* Journal Async Commit */
#define EXT4_MOUNT_I_VERSION 0x2000000 /* i_version support */
+#define EXT4_MOUNT_MBLK_IO_SUBMIT 0x4000000 /* multi-block io submits */
#define EXT4_MOUNT_DELALLOC 0x8000000 /* Delalloc support */
#define EXT4_MOUNT_DATA_ERR_ABORT 0x10000000 /* Abort on file data write */
#define EXT4_MOUNT_BLOCK_VALIDITY 0x20000000 /* Block validity checking */
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index bdbe699..e659597 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2125,9 +2125,12 @@
*/
if (unlikely(journal_data && PageChecked(page)))
err = __ext4_journalled_writepage(page, len);
- else
+ else if (test_opt(inode->i_sb, MBLK_IO_SUBMIT))
err = ext4_bio_write_page(&io_submit, page,
len, mpd->wbc);
+ else
+ err = block_write_full_page(page,
+ noalloc_get_block_write, mpd->wbc);
if (!err)
mpd->pages_written++;
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 92203b8..dc40e75 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -872,7 +872,7 @@
if (namelen > EXT4_NAME_LEN)
return NULL;
if ((namelen <= 2) && (name[0] == '.') &&
- (name[1] == '.' || name[1] == '0')) {
+ (name[1] == '.' || name[1] == '\0')) {
/*
* "." or ".." will only be in the first block
* NFS may look up ".."; "." should be handled by the VFS
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index e32195d..fb15c9c 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1026,6 +1026,8 @@
!(def_mount_opts & EXT4_DEFM_NODELALLOC))
seq_puts(seq, ",nodelalloc");
+ if (test_opt(sb, MBLK_IO_SUBMIT))
+ seq_puts(seq, ",mblk_io_submit");
if (sbi->s_stripe)
seq_printf(seq, ",stripe=%lu", sbi->s_stripe);
/*
@@ -1239,8 +1241,8 @@
Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota,
Opt_noquota, Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err,
Opt_resize, Opt_usrquota, Opt_grpquota, Opt_i_version,
- Opt_stripe, Opt_delalloc, Opt_nodelalloc,
- Opt_block_validity, Opt_noblock_validity,
+ Opt_stripe, Opt_delalloc, Opt_nodelalloc, Opt_mblk_io_submit,
+ Opt_nomblk_io_submit, Opt_block_validity, Opt_noblock_validity,
Opt_inode_readahead_blks, Opt_journal_ioprio,
Opt_dioread_nolock, Opt_dioread_lock,
Opt_discard, Opt_nodiscard,
@@ -1304,6 +1306,8 @@
{Opt_resize, "resize"},
{Opt_delalloc, "delalloc"},
{Opt_nodelalloc, "nodelalloc"},
+ {Opt_mblk_io_submit, "mblk_io_submit"},
+ {Opt_nomblk_io_submit, "nomblk_io_submit"},
{Opt_block_validity, "block_validity"},
{Opt_noblock_validity, "noblock_validity"},
{Opt_inode_readahead_blks, "inode_readahead_blks=%u"},
@@ -1725,6 +1729,12 @@
case Opt_nodelalloc:
clear_opt(sbi->s_mount_opt, DELALLOC);
break;
+ case Opt_mblk_io_submit:
+ set_opt(sbi->s_mount_opt, MBLK_IO_SUBMIT);
+ break;
+ case Opt_nomblk_io_submit:
+ clear_opt(sbi->s_mount_opt, MBLK_IO_SUBMIT);
+ break;
case Opt_stripe:
if (match_int(&args[0], &option))
return 0;
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 9242d29..8b984a2 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/module.h>
+#include <linux/compat.h>
static const struct file_operations fuse_direct_io_file_operations;
@@ -1628,6 +1629,58 @@
}
/*
+ * CUSE servers compiled on 32bit broke on 64bit kernels because the
+ * ABI was defined to be 'struct iovec' which is different on 32bit
+ * and 64bit. Fortunately we can determine which structure the server
+ * used from the size of the reply.
+ */
+static int fuse_copy_ioctl_iovec(struct iovec *dst, void *src,
+ size_t transferred, unsigned count,
+ bool is_compat)
+{
+#ifdef CONFIG_COMPAT
+ if (count * sizeof(struct compat_iovec) == transferred) {
+ struct compat_iovec *ciov = src;
+ unsigned i;
+
+ /*
+ * With this interface a 32bit server cannot support
+ * non-compat (i.e. ones coming from 64bit apps) ioctl
+ * requests
+ */
+ if (!is_compat)
+ return -EINVAL;
+
+ for (i = 0; i < count; i++) {
+ dst[i].iov_base = compat_ptr(ciov[i].iov_base);
+ dst[i].iov_len = ciov[i].iov_len;
+ }
+ return 0;
+ }
+#endif
+
+ if (count * sizeof(struct iovec) != transferred)
+ return -EIO;
+
+ memcpy(dst, src, transferred);
+ return 0;
+}
+
+/* Make sure iov_length() won't overflow */
+static int fuse_verify_ioctl_iov(struct iovec *iov, size_t count)
+{
+ size_t n;
+ u32 max = FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT;
+
+ for (n = 0; n < count; n++) {
+ if (iov->iov_len > (size_t) max)
+ return -ENOMEM;
+ max -= iov->iov_len;
+ }
+ return 0;
+}
+
+/*
* For ioctls, there is no generic way to determine how much memory
* needs to be read and/or written. Furthermore, ioctls are allowed
* to dereference the passed pointer, so the parameter requires deep
@@ -1808,18 +1861,25 @@
in_iovs + out_iovs > FUSE_IOCTL_MAX_IOV)
goto out;
- err = -EIO;
- if ((in_iovs + out_iovs) * sizeof(struct iovec) != transferred)
- goto out;
-
- /* okay, copy in iovs and retry */
vaddr = kmap_atomic(pages[0], KM_USER0);
- memcpy(page_address(iov_page), vaddr, transferred);
+ err = fuse_copy_ioctl_iovec(page_address(iov_page), vaddr,
+ transferred, in_iovs + out_iovs,
+ (flags & FUSE_IOCTL_COMPAT) != 0);
kunmap_atomic(vaddr, KM_USER0);
+ if (err)
+ goto out;
in_iov = page_address(iov_page);
out_iov = in_iov + in_iovs;
+ err = fuse_verify_ioctl_iov(in_iov, in_iovs);
+ if (err)
+ goto out;
+
+ err = fuse_verify_ioctl_iov(out_iov, out_iovs);
+ if (err)
+ goto out;
+
goto retry;
}
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index f0a384e..996dd89 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -57,7 +57,7 @@
struct inode *, struct dentry *);
static int nfs_fsync_dir(struct file *, int);
static loff_t nfs_llseek_dir(struct file *, loff_t, int);
-static int nfs_readdir_clear_array(struct page*, gfp_t);
+static void nfs_readdir_clear_array(struct page*);
const struct file_operations nfs_dir_operations = {
.llseek = nfs_llseek_dir,
@@ -83,8 +83,8 @@
.setattr = nfs_setattr,
};
-const struct address_space_operations nfs_dir_addr_space_ops = {
- .releasepage = nfs_readdir_clear_array,
+const struct address_space_operations nfs_dir_aops = {
+ .freepage = nfs_readdir_clear_array,
};
#ifdef CONFIG_NFS_V3
@@ -178,6 +178,7 @@
struct page *page;
unsigned long page_index;
u64 *dir_cookie;
+ u64 last_cookie;
loff_t current_index;
decode_dirent_t decode;
@@ -213,17 +214,15 @@
* we are freeing strings created by nfs_add_to_readdir_array()
*/
static
-int nfs_readdir_clear_array(struct page *page, gfp_t mask)
+void nfs_readdir_clear_array(struct page *page)
{
- struct nfs_cache_array *array = nfs_readdir_get_array(page);
+ struct nfs_cache_array *array;
int i;
- if (IS_ERR(array))
- return PTR_ERR(array);
+ array = kmap_atomic(page, KM_USER0);
for (i = 0; i < array->size; i++)
kfree(array->array[i].string.name);
- nfs_readdir_release_array(page);
- return 0;
+ kunmap_atomic(array, KM_USER0);
}
/*
@@ -272,7 +271,7 @@
goto out;
array->last_cookie = entry->cookie;
array->size++;
- if (entry->eof == 1)
+ if (entry->eof != 0)
array->eof_index = array->size;
out:
nfs_readdir_release_array(page);
@@ -312,15 +311,14 @@
for (i = 0; i < array->size; i++) {
if (array->array[i].cookie == *desc->dir_cookie) {
desc->cache_entry_index = i;
- status = 0;
- goto out;
+ return 0;
}
}
- if (i == array->eof_index) {
- desc->eof = 1;
+ if (array->eof_index >= 0) {
status = -EBADCOOKIE;
+ if (*desc->dir_cookie == array->last_cookie)
+ desc->eof = 1;
}
-out:
return status;
}
@@ -328,10 +326,7 @@
int nfs_readdir_search_array(nfs_readdir_descriptor_t *desc)
{
struct nfs_cache_array *array;
- int status = -EBADCOOKIE;
-
- if (desc->dir_cookie == NULL)
- goto out;
+ int status;
array = nfs_readdir_get_array(desc->page);
if (IS_ERR(array)) {
@@ -344,6 +339,10 @@
else
status = nfs_readdir_search_for_cookie(array, desc);
+ if (status == -EAGAIN) {
+ desc->last_cookie = array->last_cookie;
+ desc->page_index++;
+ }
nfs_readdir_release_array(desc->page);
out:
return status;
@@ -490,7 +489,7 @@
count++;
- if (desc->plus == 1)
+ if (desc->plus != 0)
nfs_prime_dcache(desc->file->f_path.dentry, entry);
status = nfs_readdir_add_to_array(entry, page);
@@ -498,7 +497,7 @@
break;
} while (!entry->eof);
- if (count == 0 || (status == -EBADCOOKIE && entry->eof == 1)) {
+ if (count == 0 || (status == -EBADCOOKIE && entry->eof != 0)) {
array = nfs_readdir_get_array(page);
if (!IS_ERR(array)) {
array->eof_index = array->size;
@@ -563,7 +562,7 @@
unsigned int array_size = ARRAY_SIZE(pages);
entry.prev_cookie = 0;
- entry.cookie = *desc->dir_cookie;
+ entry.cookie = desc->last_cookie;
entry.eof = 0;
entry.fh = nfs_alloc_fhandle();
entry.fattr = nfs_alloc_fattr();
@@ -636,6 +635,8 @@
static
void cache_page_release(nfs_readdir_descriptor_t *desc)
{
+ if (!desc->page->mapping)
+ nfs_readdir_clear_array(desc->page);
page_cache_release(desc->page);
desc->page = NULL;
}
@@ -660,9 +661,8 @@
return PTR_ERR(desc->page);
res = nfs_readdir_search_array(desc);
- if (res == 0)
- return 0;
- cache_page_release(desc);
+ if (res != 0)
+ cache_page_release(desc);
return res;
}
@@ -672,22 +672,16 @@
{
int res;
- if (desc->page_index == 0)
+ if (desc->page_index == 0) {
desc->current_index = 0;
- while (1) {
- res = find_cache_page(desc);
- if (res != -EAGAIN)
- break;
- desc->page_index++;
+ desc->last_cookie = 0;
}
+ do {
+ res = find_cache_page(desc);
+ } while (res == -EAGAIN);
return res;
}
-static inline unsigned int dt_type(struct inode *inode)
-{
- return (inode->i_mode >> 12) & 15;
-}
-
/*
* Once we've found the start of the dirent within a page: fill 'er up...
*/
@@ -717,13 +711,12 @@
break;
}
file->f_pos++;
- desc->cache_entry_index = i;
if (i < (array->size-1))
*desc->dir_cookie = array->array[i+1].cookie;
else
*desc->dir_cookie = array->last_cookie;
}
- if (i == array->eof_index)
+ if (array->eof_index >= 0)
desc->eof = 1;
nfs_readdir_release_array(desc->page);
@@ -764,6 +757,7 @@
}
desc->page_index = 0;
+ desc->last_cookie = *desc->dir_cookie;
desc->page = page;
status = nfs_readdir_xdr_to_array(desc, page, inode);
@@ -791,7 +785,7 @@
struct inode *inode = dentry->d_inode;
nfs_readdir_descriptor_t my_desc,
*desc = &my_desc;
- int res = -ENOMEM;
+ int res;
dfprintk(FILE, "NFS: readdir(%s/%s) starting at cookie %llu\n",
dentry->d_parent->d_name.name, dentry->d_name.name,
@@ -816,7 +810,7 @@
if (res < 0)
goto out;
- while (desc->eof != 1) {
+ do {
res = readdir_search_pagecache(desc);
if (res == -EBADCOOKIE) {
@@ -844,7 +838,7 @@
res = nfs_do_filldir(desc, dirent, filldir);
if (res < 0)
break;
- }
+ } while (!desc->eof);
out:
nfs_unblock_sillyrename(dentry);
if (res > 0)
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 60677f9..7bf029e 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -693,6 +693,7 @@
{
struct inode *inode = filp->f_mapping->host;
int status = 0;
+ unsigned int saved_type = fl->fl_type;
/* Try local locking first */
posix_test_lock(filp, fl);
@@ -700,6 +701,7 @@
/* found a conflict */
goto out;
}
+ fl->fl_type = saved_type;
if (nfs_have_delegation(inode, FMODE_READ))
goto out_noconflict;
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 314f571..e67e31c 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -289,6 +289,7 @@
} else if (S_ISDIR(inode->i_mode)) {
inode->i_op = NFS_SB(sb)->nfs_client->rpc_ops->dir_inode_ops;
inode->i_fop = &nfs_dir_operations;
+ inode->i_data.a_ops = &nfs_dir_aops;
if (nfs_server_capable(inode, NFS_CAP_READDIRPLUS))
set_bit(NFS_INO_ADVISE_RDPLUS, &NFS_I(inode)->flags);
/* Deal with crossing mountpoints */
diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c
index eceafe7..4f981f1 100644
--- a/fs/nfs/mount_clnt.c
+++ b/fs/nfs/mount_clnt.c
@@ -505,13 +505,13 @@
static struct rpc_version mnt_version1 = {
.number = 1,
- .nrprocs = 2,
+ .nrprocs = ARRAY_SIZE(mnt_procedures),
.procs = mnt_procedures,
};
static struct rpc_version mnt_version3 = {
.number = 3,
- .nrprocs = 2,
+ .nrprocs = ARRAY_SIZE(mnt3_procedures),
.procs = mnt3_procedures,
};
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 6a653ff..4435e5e 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3361,6 +3361,8 @@
ret = nfs_revalidate_inode(server, inode);
if (ret < 0)
return ret;
+ if (NFS_I(inode)->cache_validity & NFS_INO_INVALID_ACL)
+ nfs_zap_acl_cache(inode);
ret = nfs4_read_cached_acl(inode, buf, buflen);
if (ret != -ENOENT)
return ret;
@@ -3389,6 +3391,13 @@
nfs_inode_return_delegation(inode);
buf_to_pages(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
ret = nfs4_call_sync(server, &msg, &arg, &res, 1);
+ /*
+ * Acl update can result in inode attribute update.
+ * so mark the attribute cache invalid.
+ */
+ spin_lock(&inode->i_lock);
+ NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATTR;
+ spin_unlock(&inode->i_lock);
nfs_access_zap_cache(inode);
nfs_zap_acl_cache(inode);
return ret;
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index 137b549..b68536c 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -115,7 +115,7 @@
{
if (!nfs_lock_request_dontget(req))
return 0;
- if (req->wb_page != NULL)
+ if (test_bit(PG_MAPPED, &req->wb_flags))
radix_tree_tag_set(&NFS_I(req->wb_context->path.dentry->d_inode)->nfs_page_tree, req->wb_index, NFS_PAGE_TAG_LOCKED);
return 1;
}
@@ -125,7 +125,7 @@
*/
void nfs_clear_page_tag_locked(struct nfs_page *req)
{
- if (req->wb_page != NULL) {
+ if (test_bit(PG_MAPPED, &req->wb_flags)) {
struct inode *inode = req->wb_context->path.dentry->d_inode;
struct nfs_inode *nfsi = NFS_I(inode);
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index e4b62c6..aedcaa7 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -152,7 +152,6 @@
(long long)NFS_FILEID(req->wb_context->path.dentry->d_inode),
req->wb_bytes,
(long long)req_offset(req));
- nfs_clear_request(req);
nfs_release_request(req);
}
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 3c04504..4100630 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1069,12 +1069,10 @@
mnt->flags |= NFS_MOUNT_VER3;
mnt->version = 3;
break;
-#ifdef CONFIG_NFS_V4
case Opt_v4:
mnt->flags &= ~NFS_MOUNT_VER3;
mnt->version = 4;
break;
-#endif
case Opt_udp:
mnt->flags &= ~NFS_MOUNT_TCP;
mnt->nfs_server.protocol = XPRT_TRANSPORT_UDP;
@@ -1286,12 +1284,10 @@
mnt->flags |= NFS_MOUNT_VER3;
mnt->version = 3;
break;
-#ifdef CONFIG_NFS_V4
case NFS4_VERSION:
mnt->flags &= ~NFS_MOUNT_VER3;
mnt->version = 4;
break;
-#endif
default:
goto out_invalid_value;
}
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 4c14c17..10d648ea 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -390,6 +390,7 @@
if (nfs_have_delegation(inode, FMODE_WRITE))
nfsi->change_attr++;
}
+ set_bit(PG_MAPPED, &req->wb_flags);
SetPagePrivate(req->wb_page);
set_page_private(req->wb_page, (unsigned long)req);
nfsi->npages++;
@@ -415,6 +416,7 @@
spin_lock(&inode->i_lock);
set_page_private(req->wb_page, 0);
ClearPagePrivate(req->wb_page);
+ clear_bit(PG_MAPPED, &req->wb_flags);
radix_tree_delete(&nfsi->nfs_page_tree, req->wb_index);
nfsi->npages--;
if (!nfsi->npages) {
@@ -422,7 +424,6 @@
iput(inode);
} else
spin_unlock(&inode->i_lock);
- nfs_clear_request(req);
nfs_release_request(req);
}
diff --git a/fs/nfsd/nfs3xdr.c b/fs/nfsd/nfs3xdr.c
index 2a533a0..7e84a85 100644
--- a/fs/nfsd/nfs3xdr.c
+++ b/fs/nfsd/nfs3xdr.c
@@ -260,9 +260,11 @@
err = vfs_getattr(fhp->fh_export->ex_path.mnt, fhp->fh_dentry,
&fhp->fh_post_attr);
fhp->fh_post_change = fhp->fh_dentry->d_inode->i_version;
- if (err)
+ if (err) {
fhp->fh_post_saved = 0;
- else
+ /* Grab the ctime anyway - set_change_info might use it */
+ fhp->fh_post_attr.ctime = fhp->fh_dentry->d_inode->i_ctime;
+ } else
fhp->fh_post_saved = 1;
}
diff --git a/fs/nfsd/xdr4.h b/fs/nfsd/xdr4.h
index 4d476ff..60fce3d 100644
--- a/fs/nfsd/xdr4.h
+++ b/fs/nfsd/xdr4.h
@@ -484,18 +484,17 @@
static inline void
set_change_info(struct nfsd4_change_info *cinfo, struct svc_fh *fhp)
{
- BUG_ON(!fhp->fh_pre_saved || !fhp->fh_post_saved);
- cinfo->atomic = 1;
+ BUG_ON(!fhp->fh_pre_saved);
+ cinfo->atomic = fhp->fh_post_saved;
cinfo->change_supported = IS_I_VERSION(fhp->fh_dentry->d_inode);
- if (cinfo->change_supported) {
- cinfo->before_change = fhp->fh_pre_change;
- cinfo->after_change = fhp->fh_post_change;
- } else {
- cinfo->before_ctime_sec = fhp->fh_pre_ctime.tv_sec;
- cinfo->before_ctime_nsec = fhp->fh_pre_ctime.tv_nsec;
- cinfo->after_ctime_sec = fhp->fh_post_attr.ctime.tv_sec;
- cinfo->after_ctime_nsec = fhp->fh_post_attr.ctime.tv_nsec;
- }
+
+ cinfo->before_change = fhp->fh_pre_change;
+ cinfo->after_change = fhp->fh_post_change;
+ cinfo->before_ctime_sec = fhp->fh_pre_ctime.tv_sec;
+ cinfo->before_ctime_nsec = fhp->fh_pre_ctime.tv_nsec;
+ cinfo->after_ctime_sec = fhp->fh_post_attr.ctime.tv_sec;
+ cinfo->after_ctime_nsec = fhp->fh_post_attr.ctime.tv_nsec;
+
}
int nfs4svc_encode_voidres(struct svc_rqst *, __be32 *, void *);
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index d2af0a8..77a5989 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -297,6 +297,7 @@
* it and some incremental backup programs won't work without it.
*/
xfs_trans_ichgtime(tp, src_ip, XFS_ICHGTIME_CHG);
+ xfs_trans_log_inode(tp, src_ip, XFS_ILOG_CORE);
/*
* Adjust the link count on src_dp. This is necessary when
diff --git a/include/acpi/video.h b/include/acpi/video.h
index 551793c..0e98e67 100644
--- a/include/acpi/video.h
+++ b/include/acpi/video.h
@@ -1,6 +1,10 @@
#ifndef __ACPI_VIDEO_H
#define __ACPI_VIDEO_H
+#include <linux/errno.h> /* for ENODEV */
+
+struct acpi_device;
+
#define ACPI_VIDEO_DISPLAY_CRT 1
#define ACPI_VIDEO_DISPLAY_TV 2
#define ACPI_VIDEO_DISPLAY_DVI 3
@@ -26,4 +30,3 @@
#endif
#endif
-
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index 8c641be..a2776e2 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -287,6 +287,8 @@
#define I915_PARAM_HAS_EXECBUF2 9
#define I915_PARAM_HAS_BSD 10
#define I915_PARAM_HAS_BLT 11
+#define I915_PARAM_HAS_RELAXED_FENCING 12
+#define I915_PARAM_HAS_COHERENT_RINGS 13
typedef struct drm_i915_getparam {
int param;
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 050a7bc..67c91b4 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -219,7 +219,7 @@
extern int acpi_blacklisted(void);
extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d);
-extern int acpi_osi_setup(char *str);
+extern void acpi_osi_setup(char *str);
#ifdef CONFIG_ACPI_NUMA
int acpi_get_pxm(acpi_handle handle);
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
index a8e4e83..475f8c4 100644
--- a/include/linux/atmdev.h
+++ b/include/linux/atmdev.h
@@ -427,8 +427,10 @@
#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
-struct atm_dev *atm_dev_register(const char *type,const struct atmdev_ops *ops,
- int number,unsigned long *flags); /* number == -1: pick first available */
+struct atm_dev *atm_dev_register(const char *type, struct device *parent,
+ const struct atmdev_ops *ops,
+ int number, /* -1 == pick first available */
+ unsigned long *flags);
struct atm_dev *atm_dev_lookup(int number);
void atm_dev_deregister(struct atm_dev *dev);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index c9e06cc..090f0ea 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -602,6 +602,7 @@
sector_t (*bmap)(struct address_space *, sector_t);
void (*invalidatepage) (struct page *, unsigned long);
int (*releasepage) (struct page *, gfp_t);
+ void (*freepage)(struct page *);
ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
int (*get_xip_mem)(struct address_space *, pgoff_t, int,
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index ce73a30..dd1a56f 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -16,6 +16,8 @@
struct gpio_keys_platform_data {
struct gpio_keys_button *buttons;
int nbuttons;
+ unsigned int poll_interval; /* polling interval in msecs -
+ for polling driver only */
unsigned int rep:1; /* enable input subsystem auto repeat */
int (*enable)(struct device *dev);
void (*disable)(struct device *dev);
diff --git a/include/linux/input.h b/include/linux/input.h
index 6ef4446..a8af21d 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -47,6 +47,25 @@
__u16 version;
};
+/**
+ * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
+ * @value: latest reported value for the axis.
+ * @minimum: specifies minimum value for the axis.
+ * @maximum: specifies maximum value for the axis.
+ * @fuzz: specifies fuzz value that is used to filter noise from
+ * the event stream.
+ * @flat: values that are within this value will be discarded by
+ * joydev interface and reported as 0 instead.
+ * @resolution: specifies resolution for the values reported for
+ * the axis.
+ *
+ * Note that input core does not clamp reported values to the
+ * [minimum, maximum] limits, such task is left to userspace.
+ *
+ * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
+ * units per millimeter (units/mm), resolution for rotational axes
+ * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ */
struct input_absinfo {
__s32 value;
__s32 minimum;
@@ -624,6 +643,10 @@
#define KEY_CAMERA_FOCUS 0x210
#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
+#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON 0x213
+#define KEY_TOUCHPAD_OFF 0x214
+
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define BTN_TRIGGER_HAPPY2 0x2c1
@@ -1130,7 +1153,7 @@
* of tracked contacts
* @mtsize: number of MT slots the device uses
* @slot: MT slot currently being transmitted
- * @absinfo: array of &struct absinfo elements holding information
+ * @absinfo: array of &struct input_absinfo elements holding information
* about absolute axes (current value, min, max, flat, fuzz,
* resolution)
* @key: reflects current state of device's keys/buttons
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index 5c51f36..add8a1b 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -29,7 +29,7 @@
#define WM8994_CONFIGURE_GPIO 0x8000
#define WM8994_DRC_REGS 5
-#define WM8994_EQ_REGS 19
+#define WM8994_EQ_REGS 20
/**
* DRC configurations are specified with a label and a set of register
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index c66fdb7..29d504d 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -401,6 +401,7 @@
#endif /* CONFIG_NFS_V3 */
extern const struct file_operations nfs_file_operations;
extern const struct address_space_operations nfs_file_aops;
+extern const struct address_space_operations nfs_dir_aops;
static inline struct nfs_open_context *nfs_file_open_context(struct file *filp)
{
diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h
index f8b60e7..d55cee7 100644
--- a/include/linux/nfs_page.h
+++ b/include/linux/nfs_page.h
@@ -29,6 +29,7 @@
*/
enum {
PG_BUSY = 0,
+ PG_MAPPED,
PG_CLEAN,
PG_NEED_COMMIT,
PG_NEED_RESCHED,
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index ebb0c80..12b2b18 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -230,6 +230,7 @@
LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */
LINUX_MIB_TCPDEFERACCEPTDROP,
LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */
+ LINUX_MIB_TCPTIMEWAITOVERFLOW, /* TCPTimeWaitOverflow */
__LINUX_MIB_MAX
};
diff --git a/include/linux/video_output.h b/include/linux/video_output.h
index 2fb46bc..ed5cdeb 100644
--- a/include/linux/video_output.h
+++ b/include/linux/video_output.h
@@ -23,6 +23,7 @@
#ifndef _LINUX_VIDEO_OUTPUT_H
#define _LINUX_VIDEO_OUTPUT_H
#include <linux/device.h>
+#include <linux/err.h>
struct output_device;
struct output_properties {
int (*set_state)(struct output_device *);
@@ -34,9 +35,23 @@
struct device dev;
};
#define to_output_device(obj) container_of(obj, struct output_device, dev)
+#if defined(CONFIG_VIDEO_OUTPUT_CONTROL) || defined(CONFIG_VIDEO_OUTPUT_CONTROL_MODULE)
struct output_device *video_output_register(const char *name,
struct device *dev,
void *devdata,
struct output_properties *op);
void video_output_unregister(struct output_device *dev);
+#else
+static struct output_device *video_output_register(const char *name,
+ struct device *dev,
+ void *devdata,
+ struct output_properties *op)
+{
+ return ERR_PTR(-ENODEV);
+}
+static void video_output_unregister(struct output_device *dev)
+{
+ return;
+}
+#endif
#endif
diff --git a/include/net/sock.h b/include/net/sock.h
index a6338d0..659d968d9 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1155,6 +1155,8 @@
/* Initialise core socket variables */
extern void sock_init_data(struct socket *sock, struct sock *sk);
+extern void sk_filter_release_rcu(struct rcu_head *rcu);
+
/**
* sk_filter_release - release a socket filter
* @fp: filter to remove
@@ -1165,7 +1167,7 @@
static inline void sk_filter_release(struct sk_filter *fp)
{
if (atomic_dec_and_test(&fp->refcnt))
- kfree(fp);
+ call_rcu_bh(&fp->rcu, sk_filter_release_rcu);
}
static inline void sk_filter_uncharge(struct sock *sk, struct sk_filter *fp)
diff --git a/include/xen/interface/io/ring.h b/include/xen/interface/io/ring.h
index e8cbf43..75271b9 100644
--- a/include/xen/interface/io/ring.h
+++ b/include/xen/interface/io/ring.h
@@ -24,8 +24,15 @@
* A ring contains as many entries as will fit, rounded down to the nearest
* power of two (so we can mask with (size-1) to loop around).
*/
-#define __RING_SIZE(_s, _sz) \
- (__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
+#define __CONST_RING_SIZE(_s, _sz) \
+ (__RD32(((_sz) - offsetof(struct _s##_sring, ring)) / \
+ sizeof(((struct _s##_sring *)0)->ring[0])))
+
+/*
+ * The same for passing in an actual pointer instead of a name tag.
+ */
+#define __RING_SIZE(_s, _sz) \
+ (__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
/*
* Macros to make the correct C datatypes for a new kind of ring.
diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c
index 01b1d3a..6c8a2a9 100644
--- a/kernel/irq/proc.c
+++ b/kernel/irq/proc.c
@@ -214,7 +214,7 @@
static int irq_spurious_proc_open(struct inode *inode, struct file *file)
{
- return single_open(file, irq_spurious_proc_show, NULL);
+ return single_open(file, irq_spurious_proc_show, PDE(inode)->data);
}
static const struct file_operations irq_spurious_proc_fops = {
diff --git a/kernel/printk.c b/kernel/printk.c
index 9a2264f..a23315d 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -1082,13 +1082,15 @@
int printk_needs_cpu(int cpu)
{
+ if (unlikely(cpu_is_offline(cpu)))
+ printk_tick();
return per_cpu(printk_pending, cpu);
}
void wake_up_klogd(void)
{
if (waitqueue_active(&log_wait))
- __raw_get_cpu_var(printk_pending) = 1;
+ this_cpu_write(printk_pending, 1);
}
/**
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 90db1bd..e785b0f 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -661,7 +661,7 @@
{
struct worker *worker = kthread_data(task);
- if (likely(!(worker->flags & WORKER_NOT_RUNNING)))
+ if (!(worker->flags & WORKER_NOT_RUNNING))
atomic_inc(get_gcwq_nr_running(cpu));
}
@@ -687,7 +687,7 @@
struct global_cwq *gcwq = get_gcwq(cpu);
atomic_t *nr_running = get_gcwq_nr_running(cpu);
- if (unlikely(worker->flags & WORKER_NOT_RUNNING))
+ if (worker->flags & WORKER_NOT_RUNNING)
return NULL;
/* this can only happen on the local cpu */
@@ -3692,7 +3692,8 @@
system_nrt_wq = alloc_workqueue("events_nrt", WQ_NON_REENTRANT, 0);
system_unbound_wq = alloc_workqueue("events_unbound", WQ_UNBOUND,
WQ_UNBOUND_MAX_ACTIVE);
- BUG_ON(!system_wq || !system_long_wq || !system_nrt_wq);
+ BUG_ON(!system_wq || !system_long_wq || !system_nrt_wq ||
+ !system_unbound_wq);
return 0;
}
early_initcall(init_workqueues);
diff --git a/mm/filemap.c b/mm/filemap.c
index ea89840..6b9aee2 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -143,13 +143,18 @@
void remove_from_page_cache(struct page *page)
{
struct address_space *mapping = page->mapping;
+ void (*freepage)(struct page *);
BUG_ON(!PageLocked(page));
+ freepage = mapping->a_ops->freepage;
spin_lock_irq(&mapping->tree_lock);
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
+
+ if (freepage)
+ freepage(page);
}
EXPORT_SYMBOL(remove_from_page_cache);
diff --git a/mm/mmap.c b/mm/mmap.c
index b179abb..50a4aa0 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2462,6 +2462,7 @@
unsigned long addr, unsigned long len,
unsigned long vm_flags, struct page **pages)
{
+ int ret;
struct vm_area_struct *vma;
vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
@@ -2479,16 +2480,23 @@
vma->vm_ops = &special_mapping_vmops;
vma->vm_private_data = pages;
- if (unlikely(insert_vm_struct(mm, vma))) {
- kmem_cache_free(vm_area_cachep, vma);
- return -ENOMEM;
- }
+ ret = security_file_mmap(NULL, 0, 0, 0, vma->vm_start, 1);
+ if (ret)
+ goto out;
+
+ ret = insert_vm_struct(mm, vma);
+ if (ret)
+ goto out;
mm->total_vm += len >> PAGE_SHIFT;
perf_event_mmap(vma);
return 0;
+
+out:
+ kmem_cache_free(vm_area_cachep, vma);
+ return ret;
}
static DEFINE_MUTEX(mm_all_locks_mutex);
diff --git a/mm/truncate.c b/mm/truncate.c
index ba887bf..3c2d5dd 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -390,6 +390,10 @@
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
+
+ if (mapping->a_ops->freepage)
+ mapping->a_ops->freepage(page);
+
page_cache_release(page); /* pagecache ref */
return 1;
failed:
diff --git a/mm/vmscan.c b/mm/vmscan.c
index d31d7ce..9ca587c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -494,9 +494,16 @@
spin_unlock_irq(&mapping->tree_lock);
swapcache_free(swap, page);
} else {
+ void (*freepage)(struct page *);
+
+ freepage = mapping->a_ops->freepage;
+
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
+
+ if (freepage != NULL)
+ freepage(page);
}
return 1;
diff --git a/net/atm/atm_sysfs.c b/net/atm/atm_sysfs.c
index 799c631..f7fa67c 100644
--- a/net/atm/atm_sysfs.c
+++ b/net/atm/atm_sysfs.c
@@ -143,12 +143,13 @@
.dev_uevent = atm_uevent,
};
-int atm_register_sysfs(struct atm_dev *adev)
+int atm_register_sysfs(struct atm_dev *adev, struct device *parent)
{
struct device *cdev = &adev->class_dev;
int i, j, err;
cdev->class = &atm_class;
+ cdev->parent = parent;
dev_set_drvdata(cdev, adev);
dev_set_name(cdev, "%s%d", adev->type, adev->number);
diff --git a/net/atm/resources.c b/net/atm/resources.c
index d29e582..23f45ce 100644
--- a/net/atm/resources.c
+++ b/net/atm/resources.c
@@ -74,8 +74,9 @@
}
EXPORT_SYMBOL(atm_dev_lookup);
-struct atm_dev *atm_dev_register(const char *type, const struct atmdev_ops *ops,
- int number, unsigned long *flags)
+struct atm_dev *atm_dev_register(const char *type, struct device *parent,
+ const struct atmdev_ops *ops, int number,
+ unsigned long *flags)
{
struct atm_dev *dev, *inuse;
@@ -115,7 +116,7 @@
goto out_fail;
}
- if (atm_register_sysfs(dev) < 0) {
+ if (atm_register_sysfs(dev, parent) < 0) {
pr_err("atm_register_sysfs failed for dev %s\n", type);
atm_proc_dev_deregister(dev);
goto out_fail;
diff --git a/net/atm/resources.h b/net/atm/resources.h
index 126fb18..521431e 100644
--- a/net/atm/resources.h
+++ b/net/atm/resources.h
@@ -42,6 +42,6 @@
#endif /* CONFIG_PROC_FS */
-int atm_register_sysfs(struct atm_dev *adev);
+int atm_register_sysfs(struct atm_dev *adev, struct device *parent);
void atm_unregister_sysfs(struct atm_dev *adev);
#endif
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index d0927d1..66b9e5c 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -882,7 +882,7 @@
int lm = 0;
if (type != SCO_LINK && type != ESCO_LINK)
- return 0;
+ return -EINVAL;
BT_DBG("hdev %s, bdaddr %s", hdev->name, batostr(bdaddr));
@@ -908,7 +908,7 @@
BT_DBG("hcon %p bdaddr %s status %d", hcon, batostr(&hcon->dst), status);
if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK)
- return 0;
+ return -EINVAL;
if (!status) {
struct sco_conn *conn;
@@ -927,7 +927,7 @@
BT_DBG("hcon %p reason %d", hcon, reason);
if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK)
- return 0;
+ return -EINVAL;
sco_conn_del(hcon, bt_err(reason));
diff --git a/net/core/filter.c b/net/core/filter.c
index c1ee800..ae21a0d 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -589,23 +589,16 @@
EXPORT_SYMBOL(sk_chk_filter);
/**
- * sk_filter_rcu_release - Release a socket filter by rcu_head
+ * sk_filter_release_rcu - Release a socket filter by rcu_head
* @rcu: rcu_head that contains the sk_filter to free
*/
-static void sk_filter_rcu_release(struct rcu_head *rcu)
+void sk_filter_release_rcu(struct rcu_head *rcu)
{
struct sk_filter *fp = container_of(rcu, struct sk_filter, rcu);
- sk_filter_release(fp);
+ kfree(fp);
}
-
-static void sk_filter_delayed_uncharge(struct sock *sk, struct sk_filter *fp)
-{
- unsigned int size = sk_filter_len(fp);
-
- atomic_sub(size, &sk->sk_omem_alloc);
- call_rcu_bh(&fp->rcu, sk_filter_rcu_release);
-}
+EXPORT_SYMBOL(sk_filter_release_rcu);
/**
* sk_attach_filter - attach a socket filter
@@ -649,7 +642,7 @@
rcu_assign_pointer(sk->sk_filter, fp);
if (old_fp)
- sk_filter_delayed_uncharge(sk, old_fp);
+ sk_filter_uncharge(sk, old_fp);
return 0;
}
EXPORT_SYMBOL_GPL(sk_attach_filter);
@@ -663,7 +656,7 @@
sock_owned_by_user(sk));
if (filter) {
rcu_assign_pointer(sk->sk_filter, NULL);
- sk_filter_delayed_uncharge(sk, filter);
+ sk_filter_uncharge(sk, filter);
ret = 0;
}
return ret;
diff --git a/net/core/timestamping.c b/net/core/timestamping.c
index 0ae6c22..c19bb4e 100644
--- a/net/core/timestamping.c
+++ b/net/core/timestamping.c
@@ -96,11 +96,13 @@
struct phy_device *phydev;
unsigned int type;
- skb_push(skb, ETH_HLEN);
+ if (skb_headroom(skb) < ETH_HLEN)
+ return false;
+ __skb_push(skb, ETH_HLEN);
type = classify(skb);
- skb_pull(skb, ETH_HLEN);
+ __skb_pull(skb, ETH_HLEN);
switch (type) {
case PTP_CLASS_V1_IPV4:
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index 13992e1..15dcc1a 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -661,8 +661,10 @@
err = 0;
switch (cmd) {
case SIOCSIFADDR:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
+ if (!capable(CAP_NET_ADMIN)) {
+ err = -EPERM;
+ break;
+ }
edev = dev->ec_ptr;
if (edev == NULL) {
@@ -849,9 +851,13 @@
{
struct iphdr *ip = ip_hdr(skb);
unsigned char stn = ntohl(ip->saddr) & 0xff;
+ struct dst_entry *dst = skb_dst(skb);
+ struct ec_device *edev = NULL;
struct sock *sk = NULL;
struct sk_buff *newskb;
- struct ec_device *edev = skb->dev->ec_ptr;
+
+ if (dst)
+ edev = dst->dev->ec_ptr;
if (! edev)
goto bad;
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 1b48eb1..b14ec7d 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -253,6 +253,7 @@
SNMP_MIB_ITEM("TCPMinTTLDrop", LINUX_MIB_TCPMINTTLDROP),
SNMP_MIB_ITEM("TCPDeferAcceptDrop", LINUX_MIB_TCPDEFERACCEPTDROP),
SNMP_MIB_ITEM("IPReversePathFilter", LINUX_MIB_IPRPFILTER),
+ SNMP_MIB_ITEM("TCPTimeWaitOverflow", LINUX_MIB_TCPTIMEWAITOVERFLOW),
SNMP_MIB_SENTINEL
};
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 43cf901..a66735f 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -347,7 +347,7 @@
* socket up. We've got bigger problems than
* non-graceful socket closings.
*/
- LIMIT_NETDEBUG(KERN_INFO "TCP: time wait bucket table overflow\n");
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPTIMEWAITOVERFLOW);
}
tcp_update_metrics(sk);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 05b1ecf..61c2463 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -231,11 +231,10 @@
/* when initializing use the value from init_rcv_wnd
* rather than the default from above
*/
- if (init_rcv_wnd &&
- (*rcv_wnd > init_rcv_wnd * mss))
- *rcv_wnd = init_rcv_wnd * mss;
- else if (*rcv_wnd > init_cwnd * mss)
- *rcv_wnd = init_cwnd * mss;
+ if (init_rcv_wnd)
+ *rcv_wnd = min(*rcv_wnd, init_rcv_wnd * mss);
+ else
+ *rcv_wnd = min(*rcv_wnd, init_cwnd * mss);
}
/* Set the clamp no higher than max representable value */
@@ -386,27 +385,30 @@
*/
static u8 tcp_cookie_size_check(u8 desired)
{
- if (desired > 0) {
+ int cookie_size;
+
+ if (desired > 0)
/* previously specified */
return desired;
- }
- if (sysctl_tcp_cookie_size <= 0) {
+
+ cookie_size = ACCESS_ONCE(sysctl_tcp_cookie_size);
+ if (cookie_size <= 0)
/* no default specified */
return 0;
- }
- if (sysctl_tcp_cookie_size <= TCP_COOKIE_MIN) {
+
+ if (cookie_size <= TCP_COOKIE_MIN)
/* value too small, specify minimum */
return TCP_COOKIE_MIN;
- }
- if (sysctl_tcp_cookie_size >= TCP_COOKIE_MAX) {
+
+ if (cookie_size >= TCP_COOKIE_MAX)
/* value too large, specify maximum */
return TCP_COOKIE_MAX;
- }
- if (0x1 & sysctl_tcp_cookie_size) {
+
+ if (cookie_size & 1)
/* 8-bit multiple, illegal, fix it */
- return (u8)(sysctl_tcp_cookie_size + 0x1);
- }
- return (u8)sysctl_tcp_cookie_size;
+ cookie_size++;
+
+ return (u8)cookie_size;
}
/* Write previously computed TCP options to the packet.
@@ -1513,6 +1515,7 @@
struct tcp_sock *tp = tcp_sk(sk);
const struct inet_connection_sock *icsk = inet_csk(sk);
u32 send_win, cong_win, limit, in_flight;
+ int win_divisor;
if (TCP_SKB_CB(skb)->flags & TCPHDR_FIN)
goto send_now;
@@ -1544,13 +1547,14 @@
if ((skb != tcp_write_queue_tail(sk)) && (limit >= skb->len))
goto send_now;
- if (sysctl_tcp_tso_win_divisor) {
+ win_divisor = ACCESS_ONCE(sysctl_tcp_tso_win_divisor);
+ if (win_divisor) {
u32 chunk = min(tp->snd_wnd, tp->snd_cwnd * tp->mss_cache);
/* If at least some fraction of a window is available,
* just use it.
*/
- chunk /= sysctl_tcp_tso_win_divisor;
+ chunk /= win_divisor;
if (limit >= chunk)
goto send_now;
} else {
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 23cc8e1..93b7a93 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4021,11 +4021,11 @@
kfree_skb(skb);
goto errout;
}
- rtnl_notify(skb, net, 0, RTNLGRP_IPV6_IFADDR, NULL, GFP_ATOMIC);
+ rtnl_notify(skb, net, 0, RTNLGRP_IPV6_IFINFO, NULL, GFP_ATOMIC);
return;
errout:
if (err < 0)
- rtnl_set_sk_err(net, RTNLGRP_IPV6_IFADDR, err);
+ rtnl_set_sk_err(net, RTNLGRP_IPV6_IFINFO, err);
}
static inline size_t inet6_prefix_nlmsg_size(void)
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 2a59610..70e891a 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -1175,6 +1175,8 @@
sizeof (struct ipv6hdr);
dev->mtu = rt->rt6i_dev->mtu - sizeof (struct ipv6hdr);
+ if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
+ dev->mtu-=8;
if (dev->mtu < IPV6_MIN_MTU)
dev->mtu = IPV6_MIN_MTU;
@@ -1363,12 +1365,17 @@
static void ip6_tnl_dev_setup(struct net_device *dev)
{
+ struct ip6_tnl *t;
+
dev->netdev_ops = &ip6_tnl_netdev_ops;
dev->destructor = ip6_dev_free;
dev->type = ARPHRD_TUNNEL6;
dev->hard_header_len = LL_MAX_HEADER + sizeof (struct ipv6hdr);
dev->mtu = ETH_DATA_LEN - sizeof (struct ipv6hdr);
+ t = netdev_priv(dev);
+ if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
+ dev->mtu-=8;
dev->flags |= IFF_NOARP;
dev->addr_len = sizeof(struct in6_addr);
dev->features |= NETIF_F_NETNS_LOCAL;
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index d6bfaec..8c4d00c 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -606,8 +606,9 @@
return 0;
}
- icmp_send(skb, ICMP_DEST_UNREACH, ICMP_PORT_UNREACH, 0);
+ /* no tunnel matched, let upstream know, ipsec may handle it */
rcu_read_unlock();
+ return 1;
out:
kfree_skb(skb);
return 0;
diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c
index 0bf6a59..522e219 100644
--- a/net/l2tp/l2tp_ip.c
+++ b/net/l2tp/l2tp_ip.c
@@ -674,4 +674,8 @@
MODULE_AUTHOR("James Chapman <jchapman@katalix.com>");
MODULE_DESCRIPTION("L2TP over IP");
MODULE_VERSION("1.0");
-MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, SOCK_DGRAM, IPPROTO_L2TP);
+
+/* Use the value of SOCK_DGRAM (2) directory, because __stringify does't like
+ * enums
+ */
+MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, 2, IPPROTO_L2TP);
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 5826129..e35dbe5 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -317,8 +317,9 @@
goto out;
rc = -ENODEV;
rtnl_lock();
+ rcu_read_lock();
if (sk->sk_bound_dev_if) {
- llc->dev = dev_get_by_index(&init_net, sk->sk_bound_dev_if);
+ llc->dev = dev_get_by_index_rcu(&init_net, sk->sk_bound_dev_if);
if (llc->dev) {
if (!addr->sllc_arphrd)
addr->sllc_arphrd = llc->dev->type;
@@ -329,13 +330,13 @@
!llc_mac_match(addr->sllc_mac,
llc->dev->dev_addr)) {
rc = -EINVAL;
- dev_put(llc->dev);
llc->dev = NULL;
}
}
} else
llc->dev = dev_getbyhwaddr(&init_net, addr->sllc_arphrd,
addr->sllc_mac);
+ rcu_read_unlock();
rtnl_unlock();
if (!llc->dev)
goto out;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 902b03ee..54fb4a0e 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2247,6 +2247,10 @@
break;
case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
+ if (is_multicast_ether_addr(mgmt->da) &&
+ !is_broadcast_ether_addr(mgmt->da))
+ return RX_DROP_MONITOR;
+
/* process only for station */
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return RX_DROP_MONITOR;
@@ -2741,6 +2745,7 @@
if (ieee80211_prepare_and_rx_handle(&rx, skb, true))
return;
+ goto out;
}
}
@@ -2780,6 +2785,7 @@
return;
}
+ out:
dev_kfree_skb(skb);
}
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 96c5943..7a637b8 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1587,7 +1587,12 @@
list) {
if (!ieee80211_sdata_running(tmp_sdata))
continue;
- if (tmp_sdata->vif.type != NL80211_IFTYPE_AP)
+ if (tmp_sdata->vif.type ==
+ NL80211_IFTYPE_MONITOR ||
+ tmp_sdata->vif.type ==
+ NL80211_IFTYPE_AP_VLAN ||
+ tmp_sdata->vif.type ==
+ NL80211_IFTYPE_WDS)
continue;
if (compare_ether_addr(tmp_sdata->vif.addr,
hdr->addr2) == 0) {
@@ -1732,15 +1737,13 @@
int nh_pos, h_pos;
struct sta_info *sta = NULL;
u32 sta_flags = 0;
+ struct sk_buff *tmp_skb;
if (unlikely(skb->len < ETH_HLEN)) {
ret = NETDEV_TX_OK;
goto fail;
}
- nh_pos = skb_network_header(skb) - skb->data;
- h_pos = skb_transport_header(skb) - skb->data;
-
/* convert Ethernet header to proper 802.11 header (based on
* operation mode) */
ethertype = (skb->data[12] << 8) | skb->data[13];
@@ -1913,6 +1916,20 @@
goto fail;
}
+ /*
+ * If the skb is shared we need to obtain our own copy.
+ */
+ if (skb_shared(skb)) {
+ tmp_skb = skb;
+ skb = skb_copy(skb, GFP_ATOMIC);
+ kfree_skb(tmp_skb);
+
+ if (!skb) {
+ ret = NETDEV_TX_OK;
+ goto fail;
+ }
+ }
+
hdr.frame_control = fc;
hdr.duration_id = 0;
hdr.seq_ctrl = 0;
@@ -1931,6 +1948,9 @@
encaps_len = 0;
}
+ nh_pos = skb_network_header(skb) - skb->data;
+ h_pos = skb_transport_header(skb) - skb->data;
+
skb_pull(skb, skip_header_bytes);
nh_pos -= skip_header_bytes;
h_pos -= skip_header_bytes;
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 6bd5543..0b9ee34 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -2932,6 +2932,7 @@
struct sctp_association *asoc = NULL;
struct sctp_setpeerprim prim;
struct sctp_chunk *chunk;
+ struct sctp_af *af;
int err;
sp = sctp_sk(sk);
@@ -2959,6 +2960,13 @@
if (!sctp_state(asoc, ESTABLISHED))
return -ENOTCONN;
+ af = sctp_get_af_specific(prim.sspp_addr.ss_family);
+ if (!af)
+ return -EINVAL;
+
+ if (!af->addr_valid((union sctp_addr *)&prim.sspp_addr, sp, NULL))
+ return -EADDRNOTAVAIL;
+
if (!sctp_assoc_lookup_laddr(asoc, (union sctp_addr *)&prim.sspp_addr))
return -EADDRNOTAVAIL;
diff --git a/net/socket.c b/net/socket.c
index 3ca2fd9..088fb3f 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -732,6 +732,21 @@
return ret;
}
+/**
+ * kernel_recvmsg - Receive a message from a socket (kernel space)
+ * @sock: The socket to receive the message from
+ * @msg: Received message
+ * @vec: Input s/g array for message data
+ * @num: Size of input s/g array
+ * @size: Number of bytes to read
+ * @flags: Message flags (MSG_DONTWAIT, etc...)
+ *
+ * On return the msg structure contains the scatter/gather array passed in the
+ * vec argument. The array is modified so that it consists of the unfilled
+ * portion of the original array.
+ *
+ * The returned value is the total number of bytes received, or an error.
+ */
int kernel_recvmsg(struct socket *sock, struct msghdr *msg,
struct kvec *vec, size_t num, size_t size, int flags)
{
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index ea2ff78..3f2c555 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -212,6 +212,7 @@
spin_lock(&svc_xprt_class_lock);
list_for_each_entry(xcl, &svc_xprt_class_list, xcl_list) {
struct svc_xprt *newxprt;
+ unsigned short newport;
if (strcmp(xprt_name, xcl->xcl_name))
continue;
@@ -230,8 +231,9 @@
spin_lock_bh(&serv->sv_lock);
list_add(&newxprt->xpt_list, &serv->sv_permsocks);
spin_unlock_bh(&serv->sv_lock);
+ newport = svc_xprt_local_port(newxprt);
clear_bit(XPT_BUSY, &newxprt->xpt_flags);
- return svc_xprt_local_port(newxprt);
+ return newport;
}
err:
spin_unlock(&svc_xprt_class_lock);
@@ -425,8 +427,13 @@
{
BUG_ON(!test_bit(XPT_BUSY, &xprt->xpt_flags));
xprt->xpt_pool = NULL;
+ /* As soon as we clear busy, the xprt could be closed and
+ * 'put', so we need a reference to call svc_xprt_enqueue with:
+ */
+ svc_xprt_get(xprt);
clear_bit(XPT_BUSY, &xprt->xpt_flags);
svc_xprt_enqueue(xprt);
+ svc_xprt_put(xprt);
}
EXPORT_SYMBOL_GPL(svc_xprt_received);
diff --git a/net/x25/x25_link.c b/net/x25/x25_link.c
index 73e7b95..b25c646 100644
--- a/net/x25/x25_link.c
+++ b/net/x25/x25_link.c
@@ -394,6 +394,7 @@
list_for_each_safe(entry, tmp, &x25_neigh_list) {
nb = list_entry(entry, struct x25_neigh, node);
__x25_remove_neigh(nb);
+ dev_put(nb->dev);
}
write_unlock_bh(&x25_neigh_list_lock);
}
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index eb96ce5..220ebc0 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1268,7 +1268,7 @@
return xc;
error:
- kfree(xc);
+ xfrm_state_put(xc);
return NULL;
}
EXPORT_SYMBOL(xfrm_state_migrate);
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index cb0c23a..4a66347 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -189,6 +189,9 @@
a->channels = GRAB_BITS(buf, 0, 0, 3);
a->channels++;
+ a->sample_bits = 0;
+ a->max_bitrate = 0;
+
a->format = GRAB_BITS(buf, 0, 3, 4);
switch (a->format) {
case AUDIO_CODING_TYPE_REF_STREAM_HEADER:
@@ -198,7 +201,6 @@
case AUDIO_CODING_TYPE_LPCM:
val = GRAB_BITS(buf, 2, 0, 3);
- a->sample_bits = 0;
for (i = 0; i < 3; i++)
if (val & (1 << i))
a->sample_bits |= cea_sample_sizes[i + 1];
@@ -598,24 +600,19 @@
{
int i;
- pcm->rates = 0;
- pcm->formats = 0;
- pcm->maxbps = 0;
- pcm->channels_min = -1;
- pcm->channels_max = 0;
+ /* assume basic audio support (the basic audio flag is not in ELD;
+ * however, all audio capable sinks are required to support basic
+ * audio) */
+ pcm->rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000;
+ pcm->formats = SNDRV_PCM_FMTBIT_S16_LE;
+ pcm->maxbps = 16;
+ pcm->channels_max = 2;
for (i = 0; i < eld->sad_count; i++) {
struct cea_sad *a = &eld->sad[i];
pcm->rates |= a->rates;
- if (a->channels < pcm->channels_min)
- pcm->channels_min = a->channels;
if (a->channels > pcm->channels_max)
pcm->channels_max = a->channels;
if (a->format == AUDIO_CODING_TYPE_LPCM) {
- if (a->sample_bits & AC_SUPPCM_BITS_16) {
- pcm->formats |= SNDRV_PCM_FMTBIT_S16_LE;
- if (pcm->maxbps < 16)
- pcm->maxbps = 16;
- }
if (a->sample_bits & AC_SUPPCM_BITS_20) {
pcm->formats |= SNDRV_PCM_FMTBIT_S32_LE;
if (pcm->maxbps < 20)
@@ -635,7 +632,6 @@
/* restrict the parameters by the values the codec provides */
pcm->rates &= codec_pars->rates;
pcm->formats &= codec_pars->formats;
- pcm->channels_min = max(pcm->channels_min, codec_pars->channels_min);
pcm->channels_max = min(pcm->channels_max, codec_pars->channels_max);
pcm->maxbps = min(pcm->maxbps, codec_pars->maxbps);
}
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 21aa9b0..b030c8e 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2296,6 +2296,7 @@
*/
static struct snd_pci_quirk position_fix_list[] __devinitdata = {
SND_PCI_QUIRK(0x1025, 0x009f, "Acer Aspire 5110", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1025, 0x026f, "Acer Aspire 5538", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 846d1ea..76bd58a 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -2116,8 +2116,8 @@
struct conexant_spec *spec = codec->spec;
unsigned int pinctl;
- snd_printdd("CXT5066: update speaker, hp_present=%d\n",
- spec->hp_present);
+ snd_printdd("CXT5066: update speaker, hp_present=%d, cur_eapd=%d\n",
+ spec->hp_present, spec->cur_eapd);
/* Port A (HP) */
pinctl = ((spec->hp_present & 1) && spec->cur_eapd) ? PIN_HP : 0;
@@ -2125,11 +2125,20 @@
pinctl);
/* Port D (HP/LO) */
- pinctl = ((spec->hp_present & 2) && spec->cur_eapd)
- ? spec->port_d_mode : 0;
- /* Mute if Port A is connected on Thinkpad */
- if (spec->thinkpad && (spec->hp_present & 1))
- pinctl = 0;
+ if (spec->dell_automute) {
+ /* DELL AIO Port Rule: PortA> PortD> IntSpk */
+ pinctl = (!(spec->hp_present & 1) && spec->cur_eapd)
+ ? PIN_OUT : 0;
+ } else if (spec->thinkpad) {
+ if (spec->cur_eapd)
+ pinctl = spec->port_d_mode;
+ /* Mute dock line-out if Port A (laptop HP) is present */
+ if (spec->hp_present& 1)
+ pinctl = 0;
+ } else {
+ pinctl = ((spec->hp_present & 2) && spec->cur_eapd)
+ ? spec->port_d_mode : 0;
+ }
snd_hda_codec_write(codec, 0x1c, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
pinctl);
@@ -2137,14 +2146,6 @@
pinctl = (!spec->hp_present && spec->cur_eapd) ? PIN_OUT : 0;
snd_hda_codec_write(codec, 0x1f, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
pinctl);
-
- if (spec->dell_automute) {
- /* DELL AIO Port Rule: PortA > PortD > IntSpk */
- pinctl = (!(spec->hp_present & 1) && spec->cur_eapd)
- ? PIN_OUT : 0;
- snd_hda_codec_write(codec, 0x1c, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL, pinctl);
- }
}
/* turn on/off EAPD (+ mute HP) as a master switch */
@@ -3095,8 +3096,7 @@
static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
SND_PCI_QUIRK_MASK(0x1025, 0xff00, 0x0400, "Acer", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1028, 0x02d8, "Dell Vostro", CXT5066_DELL_VOSTRO),
- SND_PCI_QUIRK(0x1028, 0x02f5, "Dell",
- CXT5066_DELL_LAPTOP),
+ SND_PCI_QUIRK(0x1028, 0x02f5, "Dell Vostro 320", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTRO),
SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP),
@@ -3109,6 +3109,7 @@
SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400s", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066_IDEAPAD),
+ SND_PCI_QUIRK(0x17aa, 0x21c5, "Thinkpad Edge 13", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21b3, "Thinkpad Edge 13 (197)", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x21b4, "Thinkpad Edge", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x21c8, "Thinkpad Edge 11", CXT5066_IDEAPAD),
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index d3e49aa..31df774 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -834,7 +834,6 @@
return -ENODEV;
} else {
/* fallback to the codec default */
- hinfo->channels_min = codec_pars->channels_min;
hinfo->channels_max = codec_pars->channels_max;
hinfo->rates = codec_pars->rates;
hinfo->formats = codec_pars->formats;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 8fddc9d..2d7d7de 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4595,6 +4595,7 @@
SND_PCI_QUIRK(0x1734, 0x10b0, "Fujitsu", ALC880_FUJITSU),
SND_PCI_QUIRK(0x1854, 0x0018, "LG LW20", ALC880_LG_LW),
SND_PCI_QUIRK(0x1854, 0x003b, "LG", ALC880_LG),
+ SND_PCI_QUIRK(0x1854, 0x005f, "LG P1 Express", ALC880_LG),
SND_PCI_QUIRK(0x1854, 0x0068, "LG w1", ALC880_LG),
SND_PCI_QUIRK(0x1854, 0x0077, "LG LW25", ALC880_LG_LW),
SND_PCI_QUIRK(0x19db, 0x4188, "TCL S700", ALC880_TCL_S700),
diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index a2e0ed5..879dff2 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -491,16 +491,16 @@
paifa |= 0x8;
break;
case SNDRV_PCM_FORMAT_S20_3LE:
- paifa |= 0x10;
+ paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_20;
break;
case SNDRV_PCM_FORMAT_S24_LE:
- paifa |= 0x10;
+ paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_24;
break;
case SNDRV_PCM_FORMAT_S32_LE:
- paifa |= 0x10;
- paifb |= WM8580_AIF_LENGTH_24;
+ paifa |= 0x0;
+ paifb |= WM8580_AIF_LENGTH_32;
break;
default:
return -EINVAL;
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index e809274..1304ca9 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -3339,7 +3339,7 @@
int mask;
int active;
- mask = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
+ mask = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2_MASK);
active = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
active &= ~mask;
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index 19ca782..0e24092 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -293,7 +293,7 @@
SOC_DOUBLE_R("Speaker ZC Switch",
WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
7, 1, 0),
-SOC_DOUBLE_TLV("Speaker Boost Volume", WM8993_SPKOUT_BOOST, 0, 3, 7, 0,
+SOC_DOUBLE_TLV("Speaker Boost Volume", WM8993_SPKOUT_BOOST, 3, 0, 7, 0,
spkboost_tlv),
SOC_ENUM("Speaker Reference", speaker_ref),
SOC_ENUM("Speaker Mode", speaker_mode),
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 441285a..85b7d54 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1619,12 +1619,14 @@
#ifdef CONFIG_SND_SOC_AC97_BUS
/* register any AC97 codecs */
for (i = 0; i < card->num_rtd; i++) {
- ret = soc_register_ac97_dai_link(&card->rtd[i]);
- if (ret < 0) {
- printk(KERN_ERR "asoc: failed to register AC97 %s\n", card->name);
- goto probe_dai_err;
- }
+ ret = soc_register_ac97_dai_link(&card->rtd[i]);
+ if (ret < 0) {
+ printk(KERN_ERR "asoc: failed to register AC97 %s\n", card->name);
+ while (--i >= 0)
+ soc_unregister_ac97_dai_link(&card->rtd[i]);
+ goto probe_dai_err;
}
+ }
#endif
card->instantiated = 1;
@@ -3072,7 +3074,9 @@
pr_debug("Registered DAI '%s'\n", dai->name);
}
+ mutex_lock(&client_mutex);
snd_soc_instantiate_cards();
+ mutex_unlock(&client_mutex);
return 0;
err:
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index e2c2de2..564491f 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -197,7 +197,7 @@
if (child_pid > 0)
kill(child_pid, SIGTERM);
- if (signr == -1)
+ if (signr == -1 || signr == SIGUSR1)
return;
signal(signr, SIG_DFL);
@@ -515,6 +515,7 @@
atexit(sig_atexit);
signal(SIGCHLD, sig_handler);
signal(SIGINT, sig_handler);
+ signal(SIGUSR1, sig_handler);
if (forks && (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0)) {
perror("failed to create pipes");
@@ -606,6 +607,7 @@
execvp(argv[0], (char **)argv);
perror(argv[0]);
+ kill(getppid(), SIGUSR1);
exit(-1);
}
@@ -762,7 +764,7 @@
}
}
- if (quiet)
+ if (quiet || signr == SIGUSR1)
return 0;
fprintf(stderr, "[ perf record: Woken up %ld times to write data ]\n", waking);
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index d7e67b1..64a85ba 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -946,11 +946,16 @@
/*
* We set id to -1 if the data file doesn't contain sample
- * ids. Check for this and avoid walking through the entire
- * list of ids which may be large.
+ * ids. This can happen when the data file contains one type
+ * of event and in that case, the header can still store the
+ * event attribute information. Check for this and avoid
+ * walking through the entire list of ids which may be large.
*/
- if (id == -1ULL)
+ if (id == -1ULL) {
+ if (header->attrs > 0)
+ return &header->attr[0]->attr;
return NULL;
+ }
for (i = 0; i < header->attrs; i++) {
struct perf_header_attr *attr = header->attr[i];
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 0500895..d628c8d 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -532,7 +532,7 @@
struct machine *machine = kmaps->machine;
struct map *curr_map = map;
struct symbol *pos;
- int count = 0;
+ int count = 0, moved = 0;
struct rb_root *root = &self->symbols[map->type];
struct rb_node *next = rb_first(root);
int kernel_range = 0;
@@ -590,6 +590,11 @@
char dso_name[PATH_MAX];
struct dso *dso;
+ if (count == 0) {
+ curr_map = map;
+ goto filter_symbol;
+ }
+
if (self->kernel == DSO_TYPE_GUEST_KERNEL)
snprintf(dso_name, sizeof(dso_name),
"[guest.kernel].%d",
@@ -615,7 +620,7 @@
map_groups__insert(kmaps, curr_map);
++kernel_range;
}
-
+filter_symbol:
if (filter && filter(curr_map, pos)) {
discard_symbol: rb_erase(&pos->rb_node, root);
symbol__delete(pos);
@@ -623,8 +628,9 @@
if (curr_map != map) {
rb_erase(&pos->rb_node, root);
symbols__insert(&curr_map->dso->symbols[curr_map->type], pos);
- }
- count++;
+ ++moved;
+ } else
+ ++count;
}
}
@@ -634,7 +640,7 @@
dso__set_loaded(curr_map->dso, curr_map->type);
}
- return count;
+ return count + moved;
}
int dso__load_kallsyms(struct dso *self, const char *filename,
@@ -2125,14 +2131,55 @@
return kernel;
}
+struct process_args {
+ u64 start;
+};
+
+static int symbol__in_kernel(void *arg, const char *name,
+ char type __used, u64 start)
+{
+ struct process_args *args = arg;
+
+ if (strchr(name, '['))
+ return 0;
+
+ args->start = start;
+ return 1;
+}
+
+/* Figure out the start address of kernel map from /proc/kallsyms */
+static u64 machine__get_kernel_start_addr(struct machine *machine)
+{
+ const char *filename;
+ char path[PATH_MAX];
+ struct process_args args;
+
+ if (machine__is_host(machine)) {
+ filename = "/proc/kallsyms";
+ } else {
+ if (machine__is_default_guest(machine))
+ filename = (char *)symbol_conf.default_guest_kallsyms;
+ else {
+ sprintf(path, "%s/proc/kallsyms", machine->root_dir);
+ filename = path;
+ }
+ }
+
+ if (kallsyms__parse(filename, &args, symbol__in_kernel) <= 0)
+ return 0;
+
+ return args.start;
+}
+
int __machine__create_kernel_maps(struct machine *self, struct dso *kernel)
{
enum map_type type;
+ u64 start = machine__get_kernel_start_addr(self);
for (type = 0; type < MAP__NR_TYPES; ++type) {
struct kmap *kmap;
- self->vmlinux_maps[type] = map__new2(0, kernel, type);
+ self->vmlinux_maps[type] = map__new2(start, kernel, type);
if (self->vmlinux_maps[type] == NULL)
return -1;