Staging: rt2870: remove dead APCLI_SUPPORT code
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/rt2870/common/mlme.c b/drivers/staging/rt2870/common/mlme.c
index a26bc03..bd30f96 100644
--- a/drivers/staging/rt2870/common/mlme.c
+++ b/drivers/staging/rt2870/common/mlme.c
@@ -559,9 +559,6 @@
IN PRTMP_ADAPTER pAd)
{
MLME_QUEUE_ELEM *Elem = NULL;
-#ifdef APCLI_SUPPORT
- SHORT apcliIfIndex;
-#endif
// Only accept MLME and Frame from peer side, no other (control/data) frame should
// get into this state machine
diff --git a/drivers/staging/rt2870/common/netif_block.c b/drivers/staging/rt2870/common/netif_block.c
index 80090eb..b637a1a 100644
--- a/drivers/staging/rt2870/common/netif_block.c
+++ b/drivers/staging/rt2870/common/netif_block.c
@@ -95,14 +95,6 @@
UCHAR IfIdx = 0;
BOOLEAN valid = FALSE;
-#ifdef APCLI_SUPPORT
- if (RTMP_GET_PACKET_NET_DEVICE(pPacket) >= MIN_NET_DEVICE_FOR_APCLI)
- {
- IfIdx = (RTMP_GET_PACKET_NET_DEVICE(pPacket) - MIN_NET_DEVICE_FOR_APCLI) % MAX_APCLI_NUM;
- NetDev = pAd->ApCfg.ApCliTab[IfIdx].dev;
- }
- else
-#endif // APCLI_SUPPORT //
{
#ifdef MBSS_SUPPORT
if (pAd->OpMode == OPMODE_AP)
diff --git a/drivers/staging/rt2870/rtmp_def.h b/drivers/staging/rt2870/rtmp_def.h
index c0f7561..8882db9 100644
--- a/drivers/staging/rt2870/rtmp_def.h
+++ b/drivers/staging/rt2870/rtmp_def.h
@@ -332,10 +332,6 @@
#define MAX_MESH_NUM 0
#define MAX_APCLI_NUM 0
-#ifdef APCLI_SUPPORT
-#undef MAX_APCLI_NUM
-#define MAX_APCLI_NUM 1
-#endif // APCLI_SUPPORT //
#define MAX_MBSSID_NUM 1
@@ -954,96 +950,6 @@
#define AP_WPA_FUNC_SIZE (AP_MAX_WPA_PTK_STATE * AP_MAX_WPA_MSG)
-#ifdef APCLI_SUPPORT
-//ApCli authentication state machine
-#define APCLI_AUTH_REQ_IDLE 0
-#define APCLI_AUTH_WAIT_SEQ2 1
-#define APCLI_AUTH_WAIT_SEQ4 2
-#define APCLI_MAX_AUTH_STATE 3
-
-#define APCLI_AUTH_MACHINE_BASE 0
-#define APCLI_MT2_MLME_AUTH_REQ 0
-#define APCLI_MT2_MLME_DEAUTH_REQ 1
-#define APCLI_MT2_PEER_AUTH_EVEN 2
-#define APCLI_MT2_PEER_DEAUTH 3
-#define APCLI_MT2_AUTH_TIMEOUT 4
-#define APCLI_MAX_AUTH_MSG 5
-
-#define APCLI_AUTH_FUNC_SIZE (APCLI_MAX_AUTH_STATE * APCLI_MAX_AUTH_MSG)
-
-//ApCli association state machine
-#define APCLI_ASSOC_IDLE 0
-#define APCLI_ASSOC_WAIT_RSP 1
-#define APCLI_MAX_ASSOC_STATE 2
-
-#define APCLI_ASSOC_MACHINE_BASE 0
-#define APCLI_MT2_MLME_ASSOC_REQ 0
-#define APCLI_MT2_MLME_DISASSOC_REQ 1
-#define APCLI_MT2_PEER_DISASSOC_REQ 2
-#define APCLI_MT2_PEER_ASSOC_RSP 3
-#define APCLI_MT2_ASSOC_TIMEOUT 4
-#define APCLI_MAX_ASSOC_MSG 5
-
-#define APCLI_ASSOC_FUNC_SIZE (APCLI_MAX_ASSOC_STATE * APCLI_MAX_ASSOC_MSG)
-
-//ApCli sync state machine
-#define APCLI_SYNC_IDLE 0 // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define APCLI_JOIN_WAIT_PROBE_RSP 1
-#define APCLI_MAX_SYNC_STATE 2
-
-#define APCLI_SYNC_MACHINE_BASE 0
-#define APCLI_MT2_MLME_PROBE_REQ 0
-#define APCLI_MT2_PEER_PROBE_RSP 1
-#define APCLI_MT2_PROBE_TIMEOUT 2
-#define APCLI_MAX_SYNC_MSG 3
-
-#define APCLI_SYNC_FUNC_SIZE (APCLI_MAX_SYNC_STATE * APCLI_MAX_SYNC_MSG)
-
-//ApCli ctrl state machine
-#define APCLI_CTRL_DISCONNECTED 0 // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define APCLI_CTRL_PROBE 1
-#define APCLI_CTRL_AUTH 2
-#define APCLI_CTRL_AUTH_2 3
-#define APCLI_CTRL_ASSOC 4
-#define APCLI_CTRL_DEASSOC 5
-#define APCLI_CTRL_CONNECTED 6
-#define APCLI_MAX_CTRL_STATE 7
-
-#define APCLI_CTRL_MACHINE_BASE 0
-#define APCLI_CTRL_JOIN_REQ 0
-#define APCLI_CTRL_PROBE_RSP 1
-#define APCLI_CTRL_AUTH_RSP 2
-#define APCLI_CTRL_DISCONNECT_REQ 3
-#define APCLI_CTRL_PEER_DISCONNECT_REQ 4
-#define APCLI_CTRL_ASSOC_RSP 5
-#define APCLI_CTRL_DEASSOC_RSP 6
-#define APCLI_CTRL_JOIN_REQ_TIMEOUT 7
-#define APCLI_CTRL_AUTH_REQ_TIMEOUT 8
-#define APCLI_CTRL_ASSOC_REQ_TIMEOUT 9
-#define APCLI_MAX_CTRL_MSG 10
-
-#define APCLI_CTRL_FUNC_SIZE (APCLI_MAX_CTRL_STATE * APCLI_MAX_CTRL_MSG)
-
-#if 0 // remove those variables by AlbertY
-// ApCli WPA state machine
-#define APCLI_WPA_PSK_IDLE 0
-#define APCLI_MAX_WPA_PSK_STATE 1
-
-// ApCli WPA MSG Type
-#define APCLI_WPA_MACHINE_BASE 0
-#define APCLI_MT2_EAPPacket 0
-#define APCLI_MT2_EAPOLStart 1
-#define APCLI_MT2_EAPOLLogoff 2
-#define APCLI_MT2_EAPOLKey 3
-#define APCLI_MT2_EAPOLASFAlert 4
-#define APCLI_MAX_WPA_PSK_MSG 5
-
-#define APCLI_WPA_PSK_FUNC_SIZE (APCLI_MAX_WPA_PSK_STATE * APCLI_MAX_WPA_PSK_MSG)
-#endif // end - 0 //
-
-#endif // APCLI_SUPPORT //
-
-
// =============================================================================
// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header