| /* linux/arch/arm/mach-s5p6442/dev-spi.c |
| * |
| * Copyright (C) 2010 Samsung Electronics Co. Ltd. |
| * Jaswinder Singh <jassi.brar@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/gpio.h> |
| |
| #include <mach/dma.h> |
| #include <mach/map.h> |
| #include <mach/irqs.h> |
| #include <mach/spi-clocks.h> |
| |
| #include <plat/s3c64xx-spi.h> |
| #include <plat/gpio-cfg.h> |
| |
| static char *spi_src_clks[] = { |
| [S5P6442_SPI_SRCCLK_PCLK] = "pclk", |
| [S5P6442_SPI_SRCCLK_SCLK] = "spi_epll", |
| }; |
| |
| /* SPI Controller platform_devices */ |
| |
| /* Since we emulate multi-cs capability, we do not touch the CS. |
| * The emulated CS is toggled by board specific mechanism, as it can |
| * be either some immediate GPIO or some signal out of some other |
| * chip in between ... or some yet another way. |
| * We simply do not assume anything about CS. |
| */ |
| static int s5p6442_spi_cfg_gpio(struct platform_device *pdev) |
| { |
| switch (pdev->id) { |
| case 0: |
| s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2)); |
| s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP); |
| s3c_gpio_cfgall_range(S5P6442_GPB(2), 2, |
| S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); |
| break; |
| |
| default: |
| dev_err(&pdev->dev, "Invalid SPI Controller number!"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static struct resource s5p6442_spi0_resource[] = { |
| [0] = { |
| .start = S5P6442_PA_SPI, |
| .end = S5P6442_PA_SPI + 0x100 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = DMACH_SPI0_TX, |
| .end = DMACH_SPI0_TX, |
| .flags = IORESOURCE_DMA, |
| }, |
| [2] = { |
| .start = DMACH_SPI0_RX, |
| .end = DMACH_SPI0_RX, |
| .flags = IORESOURCE_DMA, |
| }, |
| [3] = { |
| .start = IRQ_SPI0, |
| .end = IRQ_SPI0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct s3c64xx_spi_info s5p6442_spi0_pdata = { |
| .cfg_gpio = s5p6442_spi_cfg_gpio, |
| .fifo_lvl_mask = 0x1ff, |
| .rx_lvl_offset = 15, |
| }; |
| |
| static u64 spi_dmamask = DMA_BIT_MASK(32); |
| |
| struct platform_device s5p6442_device_spi = { |
| .name = "s3c64xx-spi", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(s5p6442_spi0_resource), |
| .resource = s5p6442_spi0_resource, |
| .dev = { |
| .dma_mask = &spi_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &s5p6442_spi0_pdata, |
| }, |
| }; |
| |
| void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) |
| { |
| struct s3c64xx_spi_info *pd; |
| |
| /* Reject invalid configuration */ |
| if (!num_cs || src_clk_nr < 0 |
| || src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) { |
| printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); |
| return; |
| } |
| |
| switch (cntrlr) { |
| case 0: |
| pd = &s5p6442_spi0_pdata; |
| break; |
| default: |
| printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", |
| __func__, cntrlr); |
| return; |
| } |
| |
| pd->num_cs = num_cs; |
| pd->src_clk_nr = src_clk_nr; |
| pd->src_clk_name = spi_src_clks[src_clk_nr]; |
| } |