arch/arm/mach-omap1/sleep.S - kernel/msm-4.9 - Gitiles

 /*
  * linux/arch/arm/mach-omap1/sleep.S
  *
  * Low-level OMAP730/1510/1610 sleep/wakeUp support
  *
  * Initial SA1110 code:
  * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
  *
  * Adapted for PXA by Nicolas Pitre:
  * Copyright (c) 2002 Monta Vista Software, Inc.
  *
  * Support for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
  * option) any later version.
  *
  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
  * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * You should have received a copy of the GNU General Public License along
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */

 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
 #include <mach/pm.h>

 		.text


 /*
  * Forces OMAP into deep sleep state
  *
  * omapXXXX_cpu_suspend()
  *
  * The values of the registers ARM_IDLECT1 and ARM_IDLECT2 are passed
  * as arg0 and arg1 from caller. arg0 is stored in register r0 and arg1
  * in register r1.
  *
  * Note: This code get's copied to internal SRAM at boot. When the OMAP
  *	 wakes up it continues execution at the point it went to sleep.
  *
  * Note: Because of errata work arounds we have processor specific functions
  *       here. They are mostly the same, but slightly different.
  *
  */

 #if defined(CONFIG_ARCH_OMAP730)
 ENTRY(omap730_cpu_suspend)

 	@ save registers on stack
 	stmfd	sp!, {r0 - r12, lr}

 	@ Drain write cache
 	mov	r4, #0
 	mcr	p15, 0, r0, c7, c10, 4
 	nop

 	@ load base address of Traffic Controller
 	mov	r6, #TCMIF_ASM_BASE & 0xff000000
 	orr	r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
 	orr	r6, r6, #TCMIF_ASM_BASE & 0x0000ff00

 	@ prepare to put SDRAM into self-refresh manually
 	ldr	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
 	orr	r9, r7, #SELF_REFRESH_MODE & 0xff000000
 	orr	r9, r9, #SELF_REFRESH_MODE & 0x000000ff
 	str	r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]

 	@ prepare to put EMIFS to Sleep
 	ldr	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
 	orr	r9, r8, #IDLE_EMIFS_REQUEST & 0xff
 	str	r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

 	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
 	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
 	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
 	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00

 	@ turn off clock domains
 	@ do not disable PERCK (0x04)
 	mov	r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
 	orr	r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]

 	@ request ARM idle
 	mov	r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff
 	orr	r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]

 	@ disable instruction cache
 	mrc	p15, 0, r9, c1, c0, 0
 	bic	r2, r9, #0x1000
 	mcr	p15, 0, r2, c1, c0, 0
 	nop

 /*
  * Let's wait for the next wake up event to wake us up. r0 can't be
  * used here because r0 holds ARM_IDLECT1
  */
 	mov	r2, #0
 	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
 /*
  * omap730_cpu_suspend()'s resume point.
  *
  * It will just start executing here, so we'll restore stuff from the
  * stack.
  */
 	@ re-enable Icache
 	mcr	p15, 0, r9, c1, c0, 0

 	@ reset the ARM_IDLECT1 and ARM_IDLECT2.
 	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]

 	@ Restore EMIFF controls
 	str	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
 	str	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

 	@ restore regs and return
 	ldmfd	sp!, {r0 - r12, pc}

 ENTRY(omap730_cpu_suspend_sz)
 	.word	. - omap730_cpu_suspend
 #endif /* CONFIG_ARCH_OMAP730 */

 #ifdef CONFIG_ARCH_OMAP15XX
 ENTRY(omap1510_cpu_suspend)

 	@ save registers on stack
 	stmfd	sp!, {r0 - r12, lr}

 	@ load base address of Traffic Controller
 	mov	r4, #TCMIF_ASM_BASE & 0xff000000
 	orr	r4, r4, #TCMIF_ASM_BASE & 0x00ff0000
 	orr	r4, r4, #TCMIF_ASM_BASE & 0x0000ff00

 	@ work around errata of OMAP1510 PDE bit for TC shut down
 	@ clear PDE bit
 	ldr	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
 	bic	r5, r5, #PDE_BIT & 0xff
 	str	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

 	@ set PWD_EN bit
 	and	r5, r5, #PWD_EN_BIT & 0xff
 	str	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

 	@ prepare to put SDRAM into self-refresh manually
 	ldr	r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
 	orr	r5, r5, #SELF_REFRESH_MODE & 0xff000000
 	orr	r5, r5, #SELF_REFRESH_MODE & 0x000000ff
 	str	r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]

 	@ prepare to put EMIFS to Sleep
 	ldr	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
 	orr	r5, r5, #IDLE_EMIFS_REQUEST & 0xff
 	str	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

 	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
 	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
 	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
 	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00

 	@ turn off clock domains
 	mov	r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff
 	orr	r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]

 	@ request ARM idle
 	mov	r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff
 	orr	r3, r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff00
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]

 	mov	r5, #IDLE_WAIT_CYCLES & 0xff
 	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
 l_1510_2:
 	subs	r5, r5, #1
 	bne	l_1510_2
 /*
  * Let's wait for the next wake up event to wake us up. r0 can't be
  * used here because r0 holds ARM_IDLECT1
  */
 	mov	r2, #0
 	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
 /*
  * omap1510_cpu_suspend()'s resume point.
  *
  * It will just start executing here, so we'll restore stuff from the
  * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
  */
 	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]

 	@ restore regs and return
 	ldmfd	sp!, {r0 - r12, pc}

 ENTRY(omap1510_cpu_suspend_sz)
 	.word	. - omap1510_cpu_suspend
 #endif /* CONFIG_ARCH_OMAP15XX */

 #if defined(CONFIG_ARCH_OMAP16XX)
 ENTRY(omap1610_cpu_suspend)

 	@ save registers on stack
 	stmfd	sp!, {r0 - r12, lr}

 	@ Drain write cache
 	mov	r4, #0
 	mcr	p15, 0, r0, c7, c10, 4
 	nop

 	@ Load base address of Traffic Controller
 	mov	r6, #TCMIF_ASM_BASE & 0xff000000
 	orr	r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
 	orr	r6, r6, #TCMIF_ASM_BASE & 0x0000ff00

 	@ Prepare to put SDRAM into self-refresh manually
 	ldr	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
 	orr	r9, r7, #SELF_REFRESH_MODE & 0xff000000
 	orr	r9, r9, #SELF_REFRESH_MODE & 0x000000ff
 	str	r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]

 	@ Prepare to put EMIFS to Sleep
 	ldr	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
 	orr	r9, r8, #IDLE_EMIFS_REQUEST & 0xff
 	str	r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

 	@ Load base address of ARM_IDLECT1 and ARM_IDLECT2
 	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
 	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
 	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00

 	@ Turn off clock domains
 	@ Do not disable PERCK (0x04)
 	mov	r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff
 	orr	r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]

 	@ Request ARM idle
 	mov	r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff
 	orr	r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]

 /*
  * Let's wait for the next wake up event to wake us up. r0 can't be
  * used here because r0 holds ARM_IDLECT1
  */
 	mov	r2, #0
 	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt

 	@ Errata (HEL3SU467, section 1.4.4) specifies nop-instructions
 	@ according to this formula:
 	@ 2 + (4*DPLL_MULT)/DPLL_DIV/ARMDIV
 	@ Max DPLL_MULT = 18
 	@ DPLL_DIV = 1
 	@ ARMDIV = 1
 	@ => 74 nop-instructions
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop	@10
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop	@20
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop	@30
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop	@40
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop	@50
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop	@60
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop	@70
 	nop
 	nop
 	nop
 	nop	@74
 /*
  * omap1610_cpu_suspend()'s resume point.
  *
  * It will just start executing here, so we'll restore stuff from the
  * stack.
  */
 	@ Restore the ARM_IDLECT1 and ARM_IDLECT2.
 	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]

 	@ Restore EMIFF controls
 	str	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
 	str	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

 	@ Restore regs and return
 	ldmfd	sp!, {r0 - r12, pc}

 ENTRY(omap1610_cpu_suspend_sz)
 	.word	. - omap1610_cpu_suspend
 #endif /* CONFIG_ARCH_OMAP16XX */
	/*
	* linux/arch/arm/mach-omap1/sleep.S
	*
	* Low-level OMAP730/1510/1610 sleep/wakeUp support
	*
	* Initial SA1110 code:
	* Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
	*
	* Adapted for PXA by Nicolas Pitre:
	* Copyright (c) 2002 Monta Vista Software, Inc.
	*
	* Support for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*
	* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
	* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
	* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
	* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
	* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
	* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
	* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	* You should have received a copy of the GNU General Public License along
	* with this program; if not, write to the Free Software Foundation, Inc.,
	* 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#include <linux/linkage.h>
	#include <asm/assembler.h>
	#include <mach/io.h>
	#include <mach/pm.h>

	.text


	/*
	* Forces OMAP into deep sleep state
	*
	* omapXXXX_cpu_suspend()
	*
	* The values of the registers ARM_IDLECT1 and ARM_IDLECT2 are passed
	* as arg0 and arg1 from caller. arg0 is stored in register r0 and arg1
	* in register r1.
	*
	* Note: This code get's copied to internal SRAM at boot. When the OMAP
	* wakes up it continues execution at the point it went to sleep.
	*
	* Note: Because of errata work arounds we have processor specific functions
	* here. They are mostly the same, but slightly different.
	*
	*/

	#if defined(CONFIG_ARCH_OMAP730)
	ENTRY(omap730_cpu_suspend)

	@ save registers on stack
	stmfd sp!, {r0 - r12, lr}

	@ Drain write cache
	mov r4, #0
	mcr p15, 0, r0, c7, c10, 4
	nop

	@ load base address of Traffic Controller
	mov r6, #TCMIF_ASM_BASE & 0xff000000
	orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
	orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00

	@ prepare to put SDRAM into self-refresh manually
	ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
	orr r9, r7, #SELF_REFRESH_MODE & 0xff000000
	orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff
	str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]

	@ prepare to put EMIFS to Sleep
	ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
	orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff
	str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
	mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000
	orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
	orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00

	@ turn off clock domains
	@ do not disable PERCK (0x04)
	mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
	orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
	strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]

	@ request ARM idle
	mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff
	orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00
	strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]

	@ disable instruction cache
	mrc p15, 0, r9, c1, c0, 0
	bic r2, r9, #0x1000
	mcr p15, 0, r2, c1, c0, 0
	nop

	/*
	* Let's wait for the next wake up event to wake us up. r0 can't be
	* used here because r0 holds ARM_IDLECT1
	*/
	mov r2, #0
	mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
	/*
	* omap730_cpu_suspend()'s resume point.
	*
	* It will just start executing here, so we'll restore stuff from the
	* stack.
	*/
	@ re-enable Icache
	mcr p15, 0, r9, c1, c0, 0

	@ reset the ARM_IDLECT1 and ARM_IDLECT2.
	strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
	strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]

	@ Restore EMIFF controls
	str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
	str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

	@ restore regs and return
	ldmfd sp!, {r0 - r12, pc}

	ENTRY(omap730_cpu_suspend_sz)
	.word . - omap730_cpu_suspend
	#endif /* CONFIG_ARCH_OMAP730 */

	#ifdef CONFIG_ARCH_OMAP15XX
	ENTRY(omap1510_cpu_suspend)

	@ save registers on stack
	stmfd sp!, {r0 - r12, lr}

	@ load base address of Traffic Controller
	mov r4, #TCMIF_ASM_BASE & 0xff000000
	orr r4, r4, #TCMIF_ASM_BASE & 0x00ff0000
	orr r4, r4, #TCMIF_ASM_BASE & 0x0000ff00

	@ work around errata of OMAP1510 PDE bit for TC shut down
	@ clear PDE bit
	ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
	bic r5, r5, #PDE_BIT & 0xff
	str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

	@ set PWD_EN bit
	and r5, r5, #PWD_EN_BIT & 0xff
	str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

	@ prepare to put SDRAM into self-refresh manually
	ldr r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
	orr r5, r5, #SELF_REFRESH_MODE & 0xff000000
	orr r5, r5, #SELF_REFRESH_MODE & 0x000000ff
	str r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]

	@ prepare to put EMIFS to Sleep
	ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
	orr r5, r5, #IDLE_EMIFS_REQUEST & 0xff
	str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
	mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000
	orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
	orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00

	@ turn off clock domains
	mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff
	orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
	strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]

	@ request ARM idle
	mov r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff
	orr r3, r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff00
	strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]

	mov r5, #IDLE_WAIT_CYCLES & 0xff
	orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00
	l_1510_2:
	subs r5, r5, #1
	bne l_1510_2
	/*
	* Let's wait for the next wake up event to wake us up. r0 can't be
	* used here because r0 holds ARM_IDLECT1
	*/
	mov r2, #0
	mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
	/*
	* omap1510_cpu_suspend()'s resume point.
	*
	* It will just start executing here, so we'll restore stuff from the
	* stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
	*/
	strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
	strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]

	@ restore regs and return
	ldmfd sp!, {r0 - r12, pc}

	ENTRY(omap1510_cpu_suspend_sz)
	.word . - omap1510_cpu_suspend
	#endif /* CONFIG_ARCH_OMAP15XX */

	#if defined(CONFIG_ARCH_OMAP16XX)
	ENTRY(omap1610_cpu_suspend)

	@ save registers on stack
	stmfd sp!, {r0 - r12, lr}

	@ Drain write cache
	mov r4, #0
	mcr p15, 0, r0, c7, c10, 4
	nop

	@ Load base address of Traffic Controller
	mov r6, #TCMIF_ASM_BASE & 0xff000000
	orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
	orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00

	@ Prepare to put SDRAM into self-refresh manually
	ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
	orr r9, r7, #SELF_REFRESH_MODE & 0xff000000
	orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff
	str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]

	@ Prepare to put EMIFS to Sleep
	ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
	orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff
	str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

	@ Load base address of ARM_IDLECT1 and ARM_IDLECT2
	mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000
	orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
	orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00

	@ Turn off clock domains
	@ Do not disable PERCK (0x04)
	mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff
	orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00
	strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]

	@ Request ARM idle
	mov r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff
	orr r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00
	strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]

	/*
	* Let's wait for the next wake up event to wake us up. r0 can't be
	* used here because r0 holds ARM_IDLECT1
	*/
	mov r2, #0
	mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt

	@ Errata (HEL3SU467, section 1.4.4) specifies nop-instructions
	@ according to this formula:
	@ 2 + (4*DPLL_MULT)/DPLL_DIV/ARMDIV
	@ Max DPLL_MULT = 18
	@ DPLL_DIV = 1
	@ ARMDIV = 1
	@ => 74 nop-instructions
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop @10
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop @20
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop @30
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop @40
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop @50
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop @60
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop @70
	nop
	nop
	nop
	nop @74
	/*
	* omap1610_cpu_suspend()'s resume point.
	*
	* It will just start executing here, so we'll restore stuff from the
	* stack.
	*/
	@ Restore the ARM_IDLECT1 and ARM_IDLECT2.
	strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
	strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]

	@ Restore EMIFF controls
	str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
	str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]

	@ Restore regs and return
	ldmfd sp!, {r0 - r12, pc}

	ENTRY(omap1610_cpu_suspend_sz)
	.word . - omap1610_cpu_suspend
	#endif /* CONFIG_ARCH_OMAP16XX */