gpio: syscon: reuse for keystone 2 socs
On Keystone SOCs, ARM host can send interrupts to DSP cores using the
DSP GPIO controller IP. Each DSP GPIO controller provides 28 IRQ signals for
each DSP core. This is one of the component used by the IPC mechanism used
on Keystone SOCs.
Keystone 2 DSP GPIO controller has specific features:
- each GPIO can be configured only as output pin;
- setting GPIO value to 1 causes IRQ generation on target DSP core;
- reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still
pending.
This patch updates gpio-syscon driver to be reused by Keystone 2 SoCs,
because the Keystone 2 DSP GPIO controller is controlled through Syscon
devices and, as requested by Linus Walleij, such kind of GPIO controllers
should be integrated with drivers/gpio/gpio-syscon.c driver.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c
index 049391b..e82fde4 100644
--- a/drivers/gpio/gpio-syscon.c
+++ b/drivers/gpio/gpio-syscon.c
@@ -140,11 +140,46 @@
.dat_bit_offset = 0x40 * 8 + 8,
};
+#define KEYSTONE_LOCK_BIT BIT(0)
+
+static void keystone_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct syscon_gpio_priv *priv = to_syscon_gpio(chip);
+ unsigned int offs;
+ int ret;
+
+ offs = priv->dreg_offset + priv->data->dat_bit_offset + offset;
+
+ if (!val)
+ return;
+
+ ret = regmap_update_bits(
+ priv->syscon,
+ (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE,
+ BIT(offs % SYSCON_REG_BITS) | KEYSTONE_LOCK_BIT,
+ BIT(offs % SYSCON_REG_BITS) | KEYSTONE_LOCK_BIT);
+ if (ret < 0)
+ dev_err(chip->dev, "gpio write failed ret(%d)\n", ret);
+}
+
+static const struct syscon_gpio_data keystone_dsp_gpio = {
+ /* ARM Keystone 2 */
+ .compatible = NULL,
+ .flags = GPIO_SYSCON_FEAT_OUT,
+ .bit_count = 28,
+ .dat_bit_offset = 4,
+ .set = keystone_gpio_set,
+};
+
static const struct of_device_id syscon_gpio_ids[] = {
{
.compatible = "cirrus,clps711x-mctrl-gpio",
.data = &clps711x_mctrl_gpio,
},
+ {
+ .compatible = "ti,keystone-dsp-gpio",
+ .data = &keystone_dsp_gpio,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, syscon_gpio_ids);