usb: dwc3: set SUSPHY bit for all cores
It is recommended to set USB3 and USB2 SUSPHY bits to '1' after the core
initialization is completed above the dwc3 revision 1.94a.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b440b2b..aefb59d 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -374,6 +374,15 @@
reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+ /*
+ * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY
+ * to '0' during coreConsultant configuration. So default value
+ * will be '0' when the core is reset. Application needs to set it
+ * to '1' after the core initialization is completed.
+ */
+ if (dwc->revision > DWC3_REVISION_194A)
+ reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+
if (dwc->u2ss_inp3_quirk)
reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK;
@@ -395,6 +404,21 @@
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
mdelay(100);
+
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+
+ /*
+ * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
+ * '0' during coreConsultant configuration. So default value will
+ * be '0' when the core is reset. Application needs to set it to
+ * '1' after the core initialization is completed.
+ */
+ if (dwc->revision > DWC3_REVISION_194A)
+ reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+ mdelay(100);
}
/**