| /* |
| * direct.c - Low-level direct PCI config space access |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/dmi.h> |
| #include "pci.h" |
| |
| /* |
| * Functions for accessing PCI configuration space with type 1 accesses |
| */ |
| |
| #define PCI_CONF1_ADDRESS(bus, devfn, reg) \ |
| (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3)) |
| |
| int pci_conf1_read(unsigned int seg, unsigned int bus, |
| unsigned int devfn, int reg, int len, u32 *value) |
| { |
| unsigned long flags; |
| |
| if ((bus > 255) || (devfn > 255) || (reg > 255)) { |
| *value = -1; |
| return -EINVAL; |
| } |
| |
| spin_lock_irqsave(&pci_config_lock, flags); |
| |
| outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8); |
| |
| switch (len) { |
| case 1: |
| *value = inb(0xCFC + (reg & 3)); |
| break; |
| case 2: |
| *value = inw(0xCFC + (reg & 2)); |
| break; |
| case 4: |
| *value = inl(0xCFC); |
| break; |
| } |
| |
| spin_unlock_irqrestore(&pci_config_lock, flags); |
| |
| return 0; |
| } |
| |
| int pci_conf1_write(unsigned int seg, unsigned int bus, |
| unsigned int devfn, int reg, int len, u32 value) |
| { |
| unsigned long flags; |
| |
| if ((bus > 255) || (devfn > 255) || (reg > 255)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&pci_config_lock, flags); |
| |
| outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8); |
| |
| switch (len) { |
| case 1: |
| outb((u8)value, 0xCFC + (reg & 3)); |
| break; |
| case 2: |
| outw((u16)value, 0xCFC + (reg & 2)); |
| break; |
| case 4: |
| outl((u32)value, 0xCFC); |
| break; |
| } |
| |
| spin_unlock_irqrestore(&pci_config_lock, flags); |
| |
| return 0; |
| } |
| |
| #undef PCI_CONF1_ADDRESS |
| |
| struct pci_raw_ops pci_direct_conf1 = { |
| .read = pci_conf1_read, |
| .write = pci_conf1_write, |
| }; |
| |
| |
| /* |
| * Functions for accessing PCI configuration space with type 2 accesses |
| */ |
| |
| #define PCI_CONF2_ADDRESS(dev, reg) (u16)(0xC000 | (dev << 8) | reg) |
| |
| static int pci_conf2_read(unsigned int seg, unsigned int bus, |
| unsigned int devfn, int reg, int len, u32 *value) |
| { |
| unsigned long flags; |
| int dev, fn; |
| |
| if ((bus > 255) || (devfn > 255) || (reg > 255)) { |
| *value = -1; |
| return -EINVAL; |
| } |
| |
| dev = PCI_SLOT(devfn); |
| fn = PCI_FUNC(devfn); |
| |
| if (dev & 0x10) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| spin_lock_irqsave(&pci_config_lock, flags); |
| |
| outb((u8)(0xF0 | (fn << 1)), 0xCF8); |
| outb((u8)bus, 0xCFA); |
| |
| switch (len) { |
| case 1: |
| *value = inb(PCI_CONF2_ADDRESS(dev, reg)); |
| break; |
| case 2: |
| *value = inw(PCI_CONF2_ADDRESS(dev, reg)); |
| break; |
| case 4: |
| *value = inl(PCI_CONF2_ADDRESS(dev, reg)); |
| break; |
| } |
| |
| outb(0, 0xCF8); |
| |
| spin_unlock_irqrestore(&pci_config_lock, flags); |
| |
| return 0; |
| } |
| |
| static int pci_conf2_write(unsigned int seg, unsigned int bus, |
| unsigned int devfn, int reg, int len, u32 value) |
| { |
| unsigned long flags; |
| int dev, fn; |
| |
| if ((bus > 255) || (devfn > 255) || (reg > 255)) |
| return -EINVAL; |
| |
| dev = PCI_SLOT(devfn); |
| fn = PCI_FUNC(devfn); |
| |
| if (dev & 0x10) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| spin_lock_irqsave(&pci_config_lock, flags); |
| |
| outb((u8)(0xF0 | (fn << 1)), 0xCF8); |
| outb((u8)bus, 0xCFA); |
| |
| switch (len) { |
| case 1: |
| outb((u8)value, PCI_CONF2_ADDRESS(dev, reg)); |
| break; |
| case 2: |
| outw((u16)value, PCI_CONF2_ADDRESS(dev, reg)); |
| break; |
| case 4: |
| outl((u32)value, PCI_CONF2_ADDRESS(dev, reg)); |
| break; |
| } |
| |
| outb(0, 0xCF8); |
| |
| spin_unlock_irqrestore(&pci_config_lock, flags); |
| |
| return 0; |
| } |
| |
| #undef PCI_CONF2_ADDRESS |
| |
| static struct pci_raw_ops pci_direct_conf2 = { |
| .read = pci_conf2_read, |
| .write = pci_conf2_write, |
| }; |
| |
| |
| /* |
| * Before we decide to use direct hardware access mechanisms, we try to do some |
| * trivial checks to ensure it at least _seems_ to be working -- we just test |
| * whether bus 00 contains a host bridge (this is similar to checking |
| * techniques used in XFree86, but ours should be more reliable since we |
| * attempt to make use of direct access hints provided by the PCI BIOS). |
| * |
| * This should be close to trivial, but it isn't, because there are buggy |
| * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID. |
| */ |
| static int __init pci_sanity_check(struct pci_raw_ops *o) |
| { |
| u32 x = 0; |
| int devfn; |
| |
| if (pci_probe & PCI_NO_CHECKS) |
| return 1; |
| /* Assume Type 1 works for newer systems. |
| This handles machines that don't have anything on PCI Bus 0. */ |
| if (dmi_get_year(DMI_BIOS_DATE) >= 2001) |
| return 1; |
| |
| for (devfn = 0; devfn < 0x100; devfn++) { |
| if (o->read(0, 0, devfn, PCI_CLASS_DEVICE, 2, &x)) |
| continue; |
| if (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA) |
| return 1; |
| |
| if (o->read(0, 0, devfn, PCI_VENDOR_ID, 2, &x)) |
| continue; |
| if (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ) |
| return 1; |
| } |
| |
| DBG(KERN_WARNING "PCI: Sanity check failed\n"); |
| return 0; |
| } |
| |
| static int __init pci_check_type1(void) |
| { |
| unsigned long flags; |
| unsigned int tmp; |
| int works = 0; |
| |
| local_irq_save(flags); |
| |
| outb(0x01, 0xCFB); |
| tmp = inl(0xCF8); |
| outl(0x80000000, 0xCF8); |
| if (inl(0xCF8) == 0x80000000 && pci_sanity_check(&pci_direct_conf1)) { |
| works = 1; |
| } |
| outl(tmp, 0xCF8); |
| local_irq_restore(flags); |
| |
| return works; |
| } |
| |
| static int __init pci_check_type2(void) |
| { |
| unsigned long flags; |
| int works = 0; |
| |
| local_irq_save(flags); |
| |
| outb(0x00, 0xCFB); |
| outb(0x00, 0xCF8); |
| outb(0x00, 0xCFA); |
| if (inb(0xCF8) == 0x00 && inb(0xCFA) == 0x00 && |
| pci_sanity_check(&pci_direct_conf2)) { |
| works = 1; |
| } |
| |
| local_irq_restore(flags); |
| |
| return works; |
| } |
| |
| void __init pci_direct_init(int type) |
| { |
| if (type == 0) |
| return; |
| printk(KERN_INFO "PCI: Using configuration type %d\n", type); |
| if (type == 1) |
| raw_pci_ops = &pci_direct_conf1; |
| else |
| raw_pci_ops = &pci_direct_conf2; |
| } |
| |
| int __init pci_direct_probe(void) |
| { |
| struct resource *region, *region2; |
| |
| if ((pci_probe & PCI_PROBE_CONF1) == 0) |
| goto type2; |
| region = request_region(0xCF8, 8, "PCI conf1"); |
| if (!region) |
| goto type2; |
| |
| if (pci_check_type1()) |
| return 1; |
| release_resource(region); |
| |
| type2: |
| if ((pci_probe & PCI_PROBE_CONF2) == 0) |
| return 0; |
| region = request_region(0xCF8, 4, "PCI conf2"); |
| if (!region) |
| return 0; |
| region2 = request_region(0xC000, 0x1000, "PCI conf2"); |
| if (!region2) |
| goto fail2; |
| |
| if (pci_check_type2()) { |
| printk(KERN_INFO "PCI: Using configuration type 2\n"); |
| raw_pci_ops = &pci_direct_conf2; |
| return 2; |
| } |
| |
| release_resource(region2); |
| fail2: |
| release_resource(region); |
| return 0; |
| } |