Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable
Conflicts:
arch/arm/Kconfig
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e39caa8..37a3645 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -636,6 +636,7 @@
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_I2C
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -665,6 +666,8 @@
select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
select SAMSUNG_GPIOLIB_4BIT
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S3C64XX series based systems
@@ -673,7 +676,10 @@
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
+ select HAVE_S3C2410_WATCHDOG
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C_RTC
help
Samsung S5P6440 CPU based systems
@@ -683,6 +689,7 @@
select GENERIC_GPIO
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S5P6442 CPU based systems
@@ -693,6 +700,9 @@
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C_RTC
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S5PC100 series based systems
@@ -703,9 +713,21 @@
select HAVE_CLK
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C_RTC
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S5PV210/S5PC110 series based systems
+config ARCH_S5PV310
+ bool "Samsung S5PV310/S5PC210"
+ select CPU_V7
+ select GENERIC_GPIO
+ select HAVE_CLK
+ select GENERIC_CLOCKEVENTS
+ help
+ Samsung S5PV310 series based systems
+
config ARCH_SHARK
bool "Shark"
select CPU_SA110
@@ -907,6 +929,8 @@
source "arch/arm/mach-s5pv210/Kconfig"
+source "arch/arm/mach-s5pv310/Kconfig"
+
source "arch/arm/mach-shmobile/Kconfig"
source "arch/arm/plat-stmp3xxx/Kconfig"
@@ -1098,10 +1122,11 @@
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
- ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+ ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_S5PV310)
depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
- select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+ select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 ||\
+ ARCH_S5PV310)
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -1171,9 +1196,9 @@
bool "Use local timer interrupts"
depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
- ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
- default y
- select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || ARCH_U8500)
+ ARCH_S5PV310 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+ select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \
+ ARCH_U8500 || ARCH_VEXPRESS)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
@@ -1184,7 +1209,8 @@
config HZ
int
- default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
+ default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \
+ ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE