mfd: cs47l24: Fix defaults array based on testing
My automated test is back and now can check defaults against the actual
hardware. This patch updates the defaults array for the differences
detected and removes a couple of completely unused registers.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
diff --git a/drivers/mfd/cs47l24-tables.c b/drivers/mfd/cs47l24-tables.c
index 8708006..f6b78aa 100644
--- a/drivers/mfd/cs47l24-tables.c
+++ b/drivers/mfd/cs47l24-tables.c
@@ -227,8 +227,6 @@
{ 0x00000174, 0x007D }, /* R372 - FLL1 Control 4 */
{ 0x00000175, 0x0006 }, /* R373 - FLL1 Control 5 */
{ 0x00000176, 0x0000 }, /* R374 - FLL1 Control 6 */
- { 0x00000177, 0x0281 }, /* R375 - FLL1 Loop Filter Test 1 */
- { 0x00000178, 0x0000 }, /* R376 - FLL1 NCO Test 0 */
{ 0x00000179, 0x0000 }, /* R376 - FLL1 Control 7 */
{ 0x00000181, 0x0000 }, /* R385 - FLL1 Synchroniser 1 */
{ 0x00000182, 0x0000 }, /* R386 - FLL1 Synchroniser 2 */
@@ -245,8 +243,6 @@
{ 0x00000194, 0x007D }, /* R404 - FLL2 Control 4 */
{ 0x00000195, 0x000C }, /* R405 - FLL2 Control 5 */
{ 0x00000196, 0x0000 }, /* R406 - FLL2 Control 6 */
- { 0x00000197, 0x0000 }, /* R407 - FLL2 Loop Filter Test 1 */
- { 0x00000198, 0x0000 }, /* R408 - FLL2 NCO Test 0 */
{ 0x00000199, 0x0000 }, /* R408 - FLL2 Control 7 */
{ 0x000001A1, 0x0000 }, /* R417 - FLL2 Synchroniser 1 */
{ 0x000001A2, 0x0000 }, /* R418 - FLL2 Synchroniser 2 */
@@ -678,7 +674,7 @@
{ 0x00000C0F, 0x0400 }, /* R3087 - IRQ CTRL 1 */
{ 0x00000C10, 0x1000 }, /* R3088 - GPIO Debounce Config */
{ 0x00000C20, 0x0002 }, /* R3104 - Misc Pad Ctrl 1 */
- { 0x00000C21, 0x8001 }, /* R3105 - Misc Pad Ctrl 2 */
+ { 0x00000C21, 0x0000 }, /* R3105 - Misc Pad Ctrl 2 */
{ 0x00000C22, 0x0000 }, /* R3106 - Misc Pad Ctrl 3 */
{ 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */
{ 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */
@@ -858,8 +854,6 @@
case ARIZONA_FLL1_CONTROL_5:
case ARIZONA_FLL1_CONTROL_6:
case ARIZONA_FLL1_CONTROL_7:
- case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
- case ARIZONA_FLL1_NCO_TEST_0:
case ARIZONA_FLL1_SYNCHRONISER_1:
case ARIZONA_FLL1_SYNCHRONISER_2:
case ARIZONA_FLL1_SYNCHRONISER_3:
@@ -876,8 +870,6 @@
case ARIZONA_FLL2_CONTROL_5:
case ARIZONA_FLL2_CONTROL_6:
case ARIZONA_FLL2_CONTROL_7:
- case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
- case ARIZONA_FLL2_NCO_TEST_0:
case ARIZONA_FLL2_SYNCHRONISER_1:
case ARIZONA_FLL2_SYNCHRONISER_2:
case ARIZONA_FLL2_SYNCHRONISER_3: