| /* |
| * linux/arch/arm/mach-omap2/mcbsp.c |
| * |
| * Copyright (C) 2008 Instituto Nokia de Tecnologia |
| * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Multichannel mode not supported. |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #include <mach/irqs.h> |
| #include <plat/dma.h> |
| #include <plat/cpu.h> |
| #include <plat/mcbsp.h> |
| #include <plat/omap_device.h> |
| #include <linux/pm_runtime.h> |
| |
| #include "control.h" |
| |
| /* |
| * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle. |
| * Sidetone needs non-gated ICLK and sidetone autoidle is broken. |
| */ |
| #include "cm2xxx_3xxx.h" |
| #include "cm-regbits-34xx.h" |
| |
| /* McBSP1 internal signal muxing function for OMAP2/3 */ |
| static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal, |
| const char *src) |
| { |
| u32 v; |
| |
| v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); |
| |
| if (!strcmp(signal, "clkr")) { |
| if (!strcmp(src, "clkr")) |
| v &= ~OMAP2_MCBSP1_CLKR_MASK; |
| else if (!strcmp(src, "clkx")) |
| v |= OMAP2_MCBSP1_CLKR_MASK; |
| else |
| return -EINVAL; |
| } else if (!strcmp(signal, "fsr")) { |
| if (!strcmp(src, "fsr")) |
| v &= ~OMAP2_MCBSP1_FSR_MASK; |
| else if (!strcmp(src, "fsx")) |
| v |= OMAP2_MCBSP1_FSR_MASK; |
| else |
| return -EINVAL; |
| } else { |
| return -EINVAL; |
| } |
| |
| omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); |
| |
| return 0; |
| } |
| |
| /* McBSP4 internal signal muxing function for OMAP4 */ |
| #define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX (1 << 31) |
| #define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX (1 << 30) |
| static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal, |
| const char *src) |
| { |
| u32 v; |
| |
| /* |
| * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR |
| * mux) is used */ |
| v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP); |
| |
| if (!strcmp(signal, "clkr")) { |
| if (!strcmp(src, "clkr")) |
| v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX; |
| else if (!strcmp(src, "clkx")) |
| v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX; |
| else |
| return -EINVAL; |
| } else if (!strcmp(signal, "fsr")) { |
| if (!strcmp(src, "fsr")) |
| v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX; |
| else if (!strcmp(src, "fsx")) |
| v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX; |
| else |
| return -EINVAL; |
| } else { |
| return -EINVAL; |
| } |
| |
| omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP); |
| |
| return 0; |
| } |
| |
| /* McBSP CLKS source switching function */ |
| static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk, |
| const char *src) |
| { |
| struct clk *fck_src; |
| char *fck_src_name; |
| int r; |
| |
| if (!strcmp(src, "clks_ext")) |
| fck_src_name = "pad_fck"; |
| else if (!strcmp(src, "clks_fclk")) |
| fck_src_name = "prcm_fck"; |
| else |
| return -EINVAL; |
| |
| fck_src = clk_get(dev, fck_src_name); |
| if (IS_ERR_OR_NULL(fck_src)) { |
| pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks", |
| fck_src_name); |
| return -EINVAL; |
| } |
| |
| pm_runtime_put_sync(dev); |
| |
| r = clk_set_parent(clk, fck_src); |
| if (IS_ERR_VALUE(r)) { |
| pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n", |
| "clks", fck_src_name); |
| clk_put(fck_src); |
| return -EINVAL; |
| } |
| |
| pm_runtime_get_sync(dev); |
| |
| clk_put(fck_src); |
| |
| return 0; |
| } |
| |
| static int omap3_enable_st_clock(unsigned int id, bool enable) |
| { |
| unsigned int w; |
| |
| /* |
| * Sidetone uses McBSP ICLK - which must not idle when sidetones |
| * are enabled or sidetones start sounding ugly. |
| */ |
| w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE); |
| if (enable) |
| w &= ~(1 << (id - 2)); |
| else |
| w |= 1 << (id - 2); |
| omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE); |
| |
| return 0; |
| } |
| |
| static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) |
| { |
| int id, count = 1; |
| char *name = "omap-mcbsp"; |
| struct omap_hwmod *oh_device[2]; |
| struct omap_mcbsp_platform_data *pdata = NULL; |
| struct platform_device *pdev; |
| |
| sscanf(oh->name, "mcbsp%d", &id); |
| |
| pdata = kzalloc(sizeof(struct omap_mcbsp_platform_data), GFP_KERNEL); |
| if (!pdata) { |
| pr_err("%s: No memory for mcbsp\n", __func__); |
| return -ENOMEM; |
| } |
| |
| pdata->reg_step = 4; |
| if (oh->class->rev < MCBSP_CONFIG_TYPE2) { |
| pdata->reg_size = 2; |
| } else { |
| pdata->reg_size = 4; |
| pdata->has_ccr = true; |
| } |
| pdata->set_clk_src = omap2_mcbsp_set_clk_src; |
| |
| /* On OMAP2/3 the McBSP1 port has 6 pin configuration */ |
| if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4) |
| pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; |
| |
| /* On OMAP4 the McBSP4 port has 6 pin configuration */ |
| if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4) |
| pdata->mux_signal = omap4_mcbsp4_mux_rx_clk; |
| |
| if (oh->class->rev == MCBSP_CONFIG_TYPE3) { |
| if (id == 2) |
| /* The FIFO has 1024 + 256 locations */ |
| pdata->buffer_size = 0x500; |
| else |
| /* The FIFO has 128 locations */ |
| pdata->buffer_size = 0x80; |
| } else if (oh->class->rev == MCBSP_CONFIG_TYPE4) { |
| /* The FIFO has 128 locations for all instances */ |
| pdata->buffer_size = 0x80; |
| } |
| |
| if (oh->class->rev >= MCBSP_CONFIG_TYPE3) |
| pdata->has_wakeup = true; |
| |
| oh_device[0] = oh; |
| |
| if (oh->dev_attr) { |
| oh_device[1] = omap_hwmod_lookup(( |
| (struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone); |
| pdata->enable_st_clock = omap3_enable_st_clock; |
| count++; |
| } |
| pdev = omap_device_build_ss(name, id, oh_device, count, pdata, |
| sizeof(*pdata), NULL, 0, false); |
| kfree(pdata); |
| if (IS_ERR(pdev)) { |
| pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, |
| name, oh->name); |
| return PTR_ERR(pdev); |
| } |
| return 0; |
| } |
| |
| static int __init omap2_mcbsp_init(void) |
| { |
| omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL); |
| |
| return 0; |
| } |
| arch_initcall(omap2_mcbsp_init); |