| /* |
| * Copyright (C) 2012,2013 Infineon Technologies |
| * |
| * Authors: |
| * Peter Huewe <peter.huewe@infineon.com> |
| * |
| * Device driver for TCG/TCPA TPM (trusted platform module). |
| * Specifications at www.trustedcomputinggroup.org |
| * |
| * This device driver implements the TPM interface as defined in |
| * the TCG TPM Interface Spec version 1.2, revision 1.0 and the |
| * Infineon I2C Protocol Stack Specification v0.20. |
| * |
| * It is based on the original tpm_tis device driver from Leendert van |
| * Dorn and Kyleen Hall. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation, version 2 of the |
| * License. |
| * |
| * |
| */ |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/wait.h> |
| #include "tpm.h" |
| |
| /* max. buffer size supported by our TPM */ |
| #define TPM_BUFSIZE 1260 |
| |
| /* max. number of iterations after I2C NAK */ |
| #define MAX_COUNT 3 |
| |
| #define SLEEP_DURATION_LOW 55 |
| #define SLEEP_DURATION_HI 65 |
| |
| /* max. number of iterations after I2C NAK for 'long' commands |
| * we need this especially for sending TPM_READY, since the cleanup after the |
| * transtion to the ready state may take some time, but it is unpredictable |
| * how long it will take. |
| */ |
| #define MAX_COUNT_LONG 50 |
| |
| #define SLEEP_DURATION_LONG_LOW 200 |
| #define SLEEP_DURATION_LONG_HI 220 |
| |
| /* After sending TPM_READY to 'reset' the TPM we have to sleep even longer */ |
| #define SLEEP_DURATION_RESET_LOW 2400 |
| #define SLEEP_DURATION_RESET_HI 2600 |
| |
| /* we want to use usleep_range instead of msleep for the 5ms TPM_TIMEOUT */ |
| #define TPM_TIMEOUT_US_LOW (TPM_TIMEOUT * 1000) |
| #define TPM_TIMEOUT_US_HI (TPM_TIMEOUT_US_LOW + 2000) |
| |
| /* expected value for DIDVID register */ |
| #define TPM_TIS_I2C_DID_VID_9635 0xd1150b00L |
| #define TPM_TIS_I2C_DID_VID_9645 0x001a15d1L |
| |
| enum i2c_chip_type { |
| SLB9635, |
| SLB9645, |
| UNKNOWN, |
| }; |
| |
| /* Structure to store I2C TPM specific stuff */ |
| struct tpm_inf_dev { |
| struct i2c_client *client; |
| u8 buf[TPM_BUFSIZE + sizeof(u8)]; /* max. buffer size + addr */ |
| struct tpm_chip *chip; |
| enum i2c_chip_type chip_type; |
| }; |
| |
| static struct tpm_inf_dev tpm_dev; |
| static struct i2c_driver tpm_tis_i2c_driver; |
| |
| /* |
| * iic_tpm_read() - read from TPM register |
| * @addr: register address to read from |
| * @buffer: provided by caller |
| * @len: number of bytes to read |
| * |
| * Read len bytes from TPM register and put them into |
| * buffer (little-endian format, i.e. first byte is put into buffer[0]). |
| * |
| * NOTE: TPM is big-endian for multi-byte values. Multi-byte |
| * values have to be swapped. |
| * |
| * NOTE: We can't unfortunately use the combined read/write functions |
| * provided by the i2c core as the TPM currently does not support the |
| * repeated start condition and due to it's special requirements. |
| * The i2c_smbus* functions do not work for this chip. |
| * |
| * Return -EIO on error, 0 on success. |
| */ |
| static int iic_tpm_read(u8 addr, u8 *buffer, size_t len) |
| { |
| |
| struct i2c_msg msg1 = { |
| .addr = tpm_dev.client->addr, |
| .len = 1, |
| .buf = &addr |
| }; |
| struct i2c_msg msg2 = { |
| .addr = tpm_dev.client->addr, |
| .flags = I2C_M_RD, |
| .len = len, |
| .buf = buffer |
| }; |
| struct i2c_msg msgs[] = {msg1, msg2}; |
| |
| int rc = 0; |
| int count; |
| |
| /* Lock the adapter for the duration of the whole sequence. */ |
| if (!tpm_dev.client->adapter->algo->master_xfer) |
| return -EOPNOTSUPP; |
| i2c_lock_adapter(tpm_dev.client->adapter); |
| |
| if (tpm_dev.chip_type == SLB9645) { |
| /* use a combined read for newer chips |
| * unfortunately the smbus functions are not suitable due to |
| * the 32 byte limit of the smbus. |
| * retries should usually not be needed, but are kept just to |
| * be on the safe side. |
| */ |
| for (count = 0; count < MAX_COUNT; count++) { |
| rc = __i2c_transfer(tpm_dev.client->adapter, msgs, 2); |
| if (rc > 0) |
| break; /* break here to skip sleep */ |
| usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); |
| } |
| } else { |
| /* slb9635 protocol should work in all cases */ |
| for (count = 0; count < MAX_COUNT; count++) { |
| rc = __i2c_transfer(tpm_dev.client->adapter, &msg1, 1); |
| if (rc > 0) |
| break; /* break here to skip sleep */ |
| |
| usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); |
| } |
| |
| if (rc <= 0) |
| goto out; |
| |
| /* After the TPM has successfully received the register address |
| * it needs some time, thus we're sleeping here again, before |
| * retrieving the data |
| */ |
| for (count = 0; count < MAX_COUNT; count++) { |
| usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); |
| rc = __i2c_transfer(tpm_dev.client->adapter, &msg2, 1); |
| if (rc > 0) |
| break; |
| } |
| } |
| |
| out: |
| i2c_unlock_adapter(tpm_dev.client->adapter); |
| /* take care of 'guard time' */ |
| usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); |
| |
| if (rc <= 0) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int iic_tpm_write_generic(u8 addr, u8 *buffer, size_t len, |
| unsigned int sleep_low, |
| unsigned int sleep_hi, u8 max_count) |
| { |
| int rc = -EIO; |
| int count; |
| |
| struct i2c_msg msg1 = { |
| .addr = tpm_dev.client->addr, |
| .len = len + 1, |
| .buf = tpm_dev.buf |
| }; |
| |
| if (len > TPM_BUFSIZE) |
| return -EINVAL; |
| |
| if (!tpm_dev.client->adapter->algo->master_xfer) |
| return -EOPNOTSUPP; |
| i2c_lock_adapter(tpm_dev.client->adapter); |
| |
| /* prepend the 'register address' to the buffer */ |
| tpm_dev.buf[0] = addr; |
| memcpy(&(tpm_dev.buf[1]), buffer, len); |
| |
| /* |
| * NOTE: We have to use these special mechanisms here and unfortunately |
| * cannot rely on the standard behavior of i2c_transfer. |
| * Even for newer chips the smbus functions are not |
| * suitable due to the 32 byte limit of the smbus. |
| */ |
| for (count = 0; count < max_count; count++) { |
| rc = __i2c_transfer(tpm_dev.client->adapter, &msg1, 1); |
| if (rc > 0) |
| break; |
| usleep_range(sleep_low, sleep_hi); |
| } |
| |
| i2c_unlock_adapter(tpm_dev.client->adapter); |
| /* take care of 'guard time' */ |
| usleep_range(SLEEP_DURATION_LOW, SLEEP_DURATION_HI); |
| if (rc <= 0) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| /* |
| * iic_tpm_write() - write to TPM register |
| * @addr: register address to write to |
| * @buffer: containing data to be written |
| * @len: number of bytes to write |
| * |
| * Write len bytes from provided buffer to TPM register (little |
| * endian format, i.e. buffer[0] is written as first byte). |
| * |
| * NOTE: TPM is big-endian for multi-byte values. Multi-byte |
| * values have to be swapped. |
| * |
| * NOTE: use this function instead of the iic_tpm_write_generic function. |
| * |
| * Return -EIO on error, 0 on success |
| */ |
| static int iic_tpm_write(u8 addr, u8 *buffer, size_t len) |
| { |
| return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION_LOW, |
| SLEEP_DURATION_HI, MAX_COUNT); |
| } |
| |
| /* |
| * This function is needed especially for the cleanup situation after |
| * sending TPM_READY |
| * */ |
| static int iic_tpm_write_long(u8 addr, u8 *buffer, size_t len) |
| { |
| return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION_LONG_LOW, |
| SLEEP_DURATION_LONG_HI, MAX_COUNT_LONG); |
| } |
| |
| enum tis_access { |
| TPM_ACCESS_VALID = 0x80, |
| TPM_ACCESS_ACTIVE_LOCALITY = 0x20, |
| TPM_ACCESS_REQUEST_PENDING = 0x04, |
| TPM_ACCESS_REQUEST_USE = 0x02, |
| }; |
| |
| enum tis_status { |
| TPM_STS_VALID = 0x80, |
| TPM_STS_COMMAND_READY = 0x40, |
| TPM_STS_GO = 0x20, |
| TPM_STS_DATA_AVAIL = 0x10, |
| TPM_STS_DATA_EXPECT = 0x08, |
| }; |
| |
| enum tis_defaults { |
| TIS_SHORT_TIMEOUT = 750, /* ms */ |
| TIS_LONG_TIMEOUT = 2000, /* 2 sec */ |
| }; |
| |
| #define TPM_ACCESS(l) (0x0000 | ((l) << 4)) |
| #define TPM_STS(l) (0x0001 | ((l) << 4)) |
| #define TPM_DATA_FIFO(l) (0x0005 | ((l) << 4)) |
| #define TPM_DID_VID(l) (0x0006 | ((l) << 4)) |
| |
| static int check_locality(struct tpm_chip *chip, int loc) |
| { |
| u8 buf; |
| int rc; |
| |
| rc = iic_tpm_read(TPM_ACCESS(loc), &buf, 1); |
| if (rc < 0) |
| return rc; |
| |
| if ((buf & (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) == |
| (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) { |
| chip->vendor.locality = loc; |
| return loc; |
| } |
| |
| return -EIO; |
| } |
| |
| /* implementation similar to tpm_tis */ |
| static void release_locality(struct tpm_chip *chip, int loc, int force) |
| { |
| u8 buf; |
| if (iic_tpm_read(TPM_ACCESS(loc), &buf, 1) < 0) |
| return; |
| |
| if (force || (buf & (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) == |
| (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) { |
| buf = TPM_ACCESS_ACTIVE_LOCALITY; |
| iic_tpm_write(TPM_ACCESS(loc), &buf, 1); |
| } |
| } |
| |
| static int request_locality(struct tpm_chip *chip, int loc) |
| { |
| unsigned long stop; |
| u8 buf = TPM_ACCESS_REQUEST_USE; |
| |
| if (check_locality(chip, loc) >= 0) |
| return loc; |
| |
| iic_tpm_write(TPM_ACCESS(loc), &buf, 1); |
| |
| /* wait for burstcount */ |
| stop = jiffies + chip->vendor.timeout_a; |
| do { |
| if (check_locality(chip, loc) >= 0) |
| return loc; |
| usleep_range(TPM_TIMEOUT_US_LOW, TPM_TIMEOUT_US_HI); |
| } while (time_before(jiffies, stop)); |
| |
| return -ETIME; |
| } |
| |
| static u8 tpm_tis_i2c_status(struct tpm_chip *chip) |
| { |
| /* NOTE: since I2C read may fail, return 0 in this case --> time-out */ |
| u8 buf = 0xFF; |
| u8 i = 0; |
| |
| do { |
| if (iic_tpm_read(TPM_STS(chip->vendor.locality), &buf, 1) < 0) |
| return 0; |
| |
| i++; |
| /* if locallity is set STS should not be 0xFF */ |
| } while ((buf == 0xFF) && i < 10); |
| |
| return buf; |
| } |
| |
| static void tpm_tis_i2c_ready(struct tpm_chip *chip) |
| { |
| /* this causes the current command to be aborted */ |
| u8 buf = TPM_STS_COMMAND_READY; |
| iic_tpm_write_long(TPM_STS(chip->vendor.locality), &buf, 1); |
| } |
| |
| static ssize_t get_burstcount(struct tpm_chip *chip) |
| { |
| unsigned long stop; |
| ssize_t burstcnt; |
| u8 buf[3]; |
| |
| /* wait for burstcount */ |
| /* which timeout value, spec has 2 answers (c & d) */ |
| stop = jiffies + chip->vendor.timeout_d; |
| do { |
| /* Note: STS is little endian */ |
| if (iic_tpm_read(TPM_STS(chip->vendor.locality)+1, buf, 3) < 0) |
| burstcnt = 0; |
| else |
| burstcnt = (buf[2] << 16) + (buf[1] << 8) + buf[0]; |
| |
| if (burstcnt) |
| return burstcnt; |
| |
| usleep_range(TPM_TIMEOUT_US_LOW, TPM_TIMEOUT_US_HI); |
| } while (time_before(jiffies, stop)); |
| return -EBUSY; |
| } |
| |
| static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout, |
| int *status) |
| { |
| unsigned long stop; |
| |
| /* check current status */ |
| *status = tpm_tis_i2c_status(chip); |
| if ((*status != 0xFF) && (*status & mask) == mask) |
| return 0; |
| |
| stop = jiffies + timeout; |
| do { |
| /* since we just checked the status, give the TPM some time */ |
| usleep_range(TPM_TIMEOUT_US_LOW, TPM_TIMEOUT_US_HI); |
| *status = tpm_tis_i2c_status(chip); |
| if ((*status & mask) == mask) |
| return 0; |
| |
| } while (time_before(jiffies, stop)); |
| |
| return -ETIME; |
| } |
| |
| static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) |
| { |
| size_t size = 0; |
| ssize_t burstcnt; |
| u8 retries = 0; |
| int rc; |
| |
| while (size < count) { |
| burstcnt = get_burstcount(chip); |
| |
| /* burstcnt < 0 = TPM is busy */ |
| if (burstcnt < 0) |
| return burstcnt; |
| |
| /* limit received data to max. left */ |
| if (burstcnt > (count - size)) |
| burstcnt = count - size; |
| |
| rc = iic_tpm_read(TPM_DATA_FIFO(chip->vendor.locality), |
| &(buf[size]), burstcnt); |
| if (rc == 0) |
| size += burstcnt; |
| else if (rc < 0) |
| retries++; |
| |
| /* avoid endless loop in case of broken HW */ |
| if (retries > MAX_COUNT_LONG) |
| return -EIO; |
| } |
| return size; |
| } |
| |
| static int tpm_tis_i2c_recv(struct tpm_chip *chip, u8 *buf, size_t count) |
| { |
| int size = 0; |
| int expected, status; |
| |
| if (count < TPM_HEADER_SIZE) { |
| size = -EIO; |
| goto out; |
| } |
| |
| /* read first 10 bytes, including tag, paramsize, and result */ |
| size = recv_data(chip, buf, TPM_HEADER_SIZE); |
| if (size < TPM_HEADER_SIZE) { |
| dev_err(chip->dev, "Unable to read header\n"); |
| goto out; |
| } |
| |
| expected = be32_to_cpu(*(__be32 *)(buf + 2)); |
| if ((size_t) expected > count) { |
| size = -EIO; |
| goto out; |
| } |
| |
| size += recv_data(chip, &buf[TPM_HEADER_SIZE], |
| expected - TPM_HEADER_SIZE); |
| if (size < expected) { |
| dev_err(chip->dev, "Unable to read remainder of result\n"); |
| size = -ETIME; |
| goto out; |
| } |
| |
| wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, &status); |
| if (status & TPM_STS_DATA_AVAIL) { /* retry? */ |
| dev_err(chip->dev, "Error left over data\n"); |
| size = -EIO; |
| goto out; |
| } |
| |
| out: |
| tpm_tis_i2c_ready(chip); |
| /* The TPM needs some time to clean up here, |
| * so we sleep rather than keeping the bus busy |
| */ |
| usleep_range(SLEEP_DURATION_RESET_LOW, SLEEP_DURATION_RESET_HI); |
| release_locality(chip, chip->vendor.locality, 0); |
| return size; |
| } |
| |
| static int tpm_tis_i2c_send(struct tpm_chip *chip, u8 *buf, size_t len) |
| { |
| int rc, status; |
| ssize_t burstcnt; |
| size_t count = 0; |
| u8 retries = 0; |
| u8 sts = TPM_STS_GO; |
| |
| if (len > TPM_BUFSIZE) |
| return -E2BIG; /* command is too long for our tpm, sorry */ |
| |
| if (request_locality(chip, 0) < 0) |
| return -EBUSY; |
| |
| status = tpm_tis_i2c_status(chip); |
| if ((status & TPM_STS_COMMAND_READY) == 0) { |
| tpm_tis_i2c_ready(chip); |
| if (wait_for_stat |
| (chip, TPM_STS_COMMAND_READY, |
| chip->vendor.timeout_b, &status) < 0) { |
| rc = -ETIME; |
| goto out_err; |
| } |
| } |
| |
| while (count < len - 1) { |
| burstcnt = get_burstcount(chip); |
| |
| /* burstcnt < 0 = TPM is busy */ |
| if (burstcnt < 0) |
| return burstcnt; |
| |
| if (burstcnt > (len - 1 - count)) |
| burstcnt = len - 1 - count; |
| |
| rc = iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), |
| &(buf[count]), burstcnt); |
| if (rc == 0) |
| count += burstcnt; |
| else if (rc < 0) |
| retries++; |
| |
| /* avoid endless loop in case of broken HW */ |
| if (retries > MAX_COUNT_LONG) { |
| rc = -EIO; |
| goto out_err; |
| } |
| |
| wait_for_stat(chip, TPM_STS_VALID, |
| chip->vendor.timeout_c, &status); |
| |
| if ((status & TPM_STS_DATA_EXPECT) == 0) { |
| rc = -EIO; |
| goto out_err; |
| } |
| } |
| |
| /* write last byte */ |
| iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), &(buf[count]), 1); |
| wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, &status); |
| if ((status & TPM_STS_DATA_EXPECT) != 0) { |
| rc = -EIO; |
| goto out_err; |
| } |
| |
| /* go and do it */ |
| iic_tpm_write(TPM_STS(chip->vendor.locality), &sts, 1); |
| |
| return len; |
| out_err: |
| tpm_tis_i2c_ready(chip); |
| /* The TPM needs some time to clean up here, |
| * so we sleep rather than keeping the bus busy |
| */ |
| usleep_range(SLEEP_DURATION_RESET_LOW, SLEEP_DURATION_RESET_HI); |
| release_locality(chip, chip->vendor.locality, 0); |
| return rc; |
| } |
| |
| static bool tpm_tis_i2c_req_canceled(struct tpm_chip *chip, u8 status) |
| { |
| return (status == TPM_STS_COMMAND_READY); |
| } |
| |
| static const struct file_operations tis_ops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .open = tpm_open, |
| .read = tpm_read, |
| .write = tpm_write, |
| .release = tpm_release, |
| }; |
| |
| static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL); |
| static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL); |
| static DEVICE_ATTR(enabled, S_IRUGO, tpm_show_enabled, NULL); |
| static DEVICE_ATTR(active, S_IRUGO, tpm_show_active, NULL); |
| static DEVICE_ATTR(owned, S_IRUGO, tpm_show_owned, NULL); |
| static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated, NULL); |
| static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL); |
| static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel); |
| static DEVICE_ATTR(durations, S_IRUGO, tpm_show_durations, NULL); |
| static DEVICE_ATTR(timeouts, S_IRUGO, tpm_show_timeouts, NULL); |
| |
| static struct attribute *tis_attrs[] = { |
| &dev_attr_pubek.attr, |
| &dev_attr_pcrs.attr, |
| &dev_attr_enabled.attr, |
| &dev_attr_active.attr, |
| &dev_attr_owned.attr, |
| &dev_attr_temp_deactivated.attr, |
| &dev_attr_caps.attr, |
| &dev_attr_cancel.attr, |
| &dev_attr_durations.attr, |
| &dev_attr_timeouts.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group tis_attr_grp = { |
| .attrs = tis_attrs |
| }; |
| |
| static struct tpm_vendor_specific tpm_tis_i2c = { |
| .status = tpm_tis_i2c_status, |
| .recv = tpm_tis_i2c_recv, |
| .send = tpm_tis_i2c_send, |
| .cancel = tpm_tis_i2c_ready, |
| .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID, |
| .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID, |
| .req_canceled = tpm_tis_i2c_req_canceled, |
| .attr_group = &tis_attr_grp, |
| .miscdev.fops = &tis_ops, |
| }; |
| |
| static int tpm_tis_i2c_init(struct device *dev) |
| { |
| u32 vendor; |
| int rc = 0; |
| struct tpm_chip *chip; |
| |
| chip = tpm_register_hardware(dev, &tpm_tis_i2c); |
| if (!chip) { |
| dev_err(dev, "could not register hardware\n"); |
| rc = -ENODEV; |
| goto out_err; |
| } |
| |
| /* Disable interrupts */ |
| chip->vendor.irq = 0; |
| |
| /* Default timeouts */ |
| chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT); |
| chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT); |
| chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT); |
| chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT); |
| |
| if (request_locality(chip, 0) != 0) { |
| dev_err(dev, "could not request locality\n"); |
| rc = -ENODEV; |
| goto out_vendor; |
| } |
| |
| /* read four bytes from DID_VID register */ |
| if (iic_tpm_read(TPM_DID_VID(0), (u8 *)&vendor, 4) < 0) { |
| dev_err(dev, "could not read vendor id\n"); |
| rc = -EIO; |
| goto out_release; |
| } |
| |
| if (vendor == TPM_TIS_I2C_DID_VID_9645) { |
| tpm_dev.chip_type = SLB9645; |
| } else if (vendor == TPM_TIS_I2C_DID_VID_9635) { |
| tpm_dev.chip_type = SLB9635; |
| } else { |
| dev_err(dev, "vendor id did not match! ID was %08x\n", vendor); |
| rc = -ENODEV; |
| goto out_release; |
| } |
| |
| dev_info(dev, "1.2 TPM (device-id 0x%X)\n", vendor >> 16); |
| |
| INIT_LIST_HEAD(&chip->vendor.list); |
| tpm_dev.chip = chip; |
| |
| tpm_get_timeouts(chip); |
| tpm_do_selftest(chip); |
| |
| return 0; |
| |
| out_release: |
| release_locality(chip, chip->vendor.locality, 1); |
| |
| out_vendor: |
| /* close file handles */ |
| tpm_dev_vendor_release(chip); |
| |
| /* remove hardware */ |
| tpm_remove_hardware(chip->dev); |
| |
| /* reset these pointers, otherwise we oops */ |
| chip->dev->release = NULL; |
| chip->release = NULL; |
| tpm_dev.client = NULL; |
| dev_set_drvdata(chip->dev, chip); |
| out_err: |
| return rc; |
| } |
| |
| static const struct i2c_device_id tpm_tis_i2c_table[] = { |
| {"tpm_i2c_infineon", 0}, |
| {"slb9635tt", 0}, |
| {"slb9645tt", 1}, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, tpm_tis_i2c_table); |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id tpm_tis_i2c_of_match[] = { |
| { |
| .name = "tpm_i2c_infineon", |
| .type = "tpm", |
| .compatible = "infineon,tpm_i2c_infineon", |
| .data = (void *)0 |
| }, |
| { |
| .name = "slb9635tt", |
| .type = "tpm", |
| .compatible = "infineon,slb9635tt", |
| .data = (void *)0 |
| }, |
| { |
| .name = "slb9645tt", |
| .type = "tpm", |
| .compatible = "infineon,slb9645tt", |
| .data = (void *)1 |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, tpm_tis_i2c_of_match); |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(tpm_tis_i2c_ops, tpm_pm_suspend, tpm_pm_resume); |
| |
| static int tpm_tis_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int rc; |
| struct device *dev = &(client->dev); |
| |
| if (tpm_dev.client != NULL) { |
| dev_err(dev, "This driver only supports one client at a time\n"); |
| return -EBUSY; /* We only support one client */ |
| } |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| dev_err(dev, "no algorithms associated to the i2c bus\n"); |
| return -ENODEV; |
| } |
| |
| client->driver = &tpm_tis_i2c_driver; |
| tpm_dev.client = client; |
| rc = tpm_tis_i2c_init(&client->dev); |
| if (rc != 0) { |
| client->driver = NULL; |
| tpm_dev.client = NULL; |
| rc = -ENODEV; |
| } |
| return rc; |
| } |
| |
| static int tpm_tis_i2c_remove(struct i2c_client *client) |
| { |
| struct tpm_chip *chip = tpm_dev.chip; |
| release_locality(chip, chip->vendor.locality, 1); |
| |
| /* close file handles */ |
| tpm_dev_vendor_release(chip); |
| |
| /* remove hardware */ |
| tpm_remove_hardware(chip->dev); |
| |
| /* reset these pointers, otherwise we oops */ |
| chip->dev->release = NULL; |
| chip->release = NULL; |
| tpm_dev.client = NULL; |
| dev_set_drvdata(chip->dev, chip); |
| |
| return 0; |
| } |
| |
| static struct i2c_driver tpm_tis_i2c_driver = { |
| .id_table = tpm_tis_i2c_table, |
| .probe = tpm_tis_i2c_probe, |
| .remove = tpm_tis_i2c_remove, |
| .driver = { |
| .name = "tpm_i2c_infineon", |
| .owner = THIS_MODULE, |
| .pm = &tpm_tis_i2c_ops, |
| .of_match_table = of_match_ptr(tpm_tis_i2c_of_match), |
| }, |
| }; |
| |
| module_i2c_driver(tpm_tis_i2c_driver); |
| MODULE_AUTHOR("Peter Huewe <peter.huewe@infineon.com>"); |
| MODULE_DESCRIPTION("TPM TIS I2C Infineon Driver"); |
| MODULE_VERSION("2.2.0"); |
| MODULE_LICENSE("GPL"); |