[ALSA] Added model for Uniwill laptop with ALC861
Added a new model 'uniwill-m31' for Uniwill laptops with ALC861
codec chip. The patch is taken from ALSA bug#2035, and modifeid.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index d0dbc3f..74be228 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -827,6 +827,7 @@
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack with SPDIF I/O
3stack-660 3-jack (for ALC660)
+ uniwill-m31 Uniwill M31 laptop
auto auto-config reading BIOS (default)
CMI9880
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index a917573..f857e96 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -90,6 +90,7 @@
ALC660_3ST,
ALC861_3ST_DIG,
ALC861_6ST_DIG,
+ ALC861_UNIWILL_M31,
ALC861_AUTO,
ALC861_MODEL_LAST,
};
@@ -6021,6 +6022,23 @@
{ 2, alc861_threestack_ch2_init },
{ 6, alc861_threestack_ch6_init },
};
+/* Set mic1 as input and unmute the mixer */
+static struct hda_verb alc861_uniwill_m31_ch2_init[] = {
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, /*mic*/
+ { } /* end */
+};
+/* Set mic1 as output and mute mixer */
+static struct hda_verb alc861_uniwill_m31_ch4_init[] = {
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, /*mic*/
+ { } /* end */
+};
+
+static struct hda_channel_mode alc861_uniwill_m31_modes[2] = {
+ { 2, alc861_uniwill_m31_ch2_init },
+ { 4, alc861_uniwill_m31_ch4_init },
+};
/* patch-ALC861 */
@@ -6099,6 +6117,47 @@
},
{ } /* end */
};
+static struct snd_kcontrol_new alc861_uniwill_m31_mixer[] = {
+ /* output mixer control */
+ HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
+ /*HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT), */
+
+ /* Input mixer control */
+ /* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
+
+ /* Capture mixer control */
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .count = 1,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
+ .put = alc_mux_enum_put,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Channel Mode",
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
+ .private_value = ARRAY_SIZE(alc861_uniwill_m31_modes),
+ },
+ { } /* end */
+};
/*
* generic initialization of ADC, input mixers and output mixers
@@ -6227,6 +6286,67 @@
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{ }
};
+
+static struct hda_verb alc861_uniwill_m31_init_verbs[] = {
+ /*
+ * Unmute ADC0 and set the default input to mic-in
+ */
+ /* port-A for surround (rear panel) */
+ { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ /* port-B for mic-in (rear panel) with vref */
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ /* port-C for line-in (rear panel) */
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* port-D for Front */
+ { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ /* port-E for HP out (front panel) */
+ { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, // this has to be set to VREF80
+ /* route front PCM to HP */
+ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ /* port-F for mic-in (front panel) with vref */
+ { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ /* port-G for CLFE (rear panel) */
+ { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ /* port-H for side (rear panel) */
+ { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ /* CD-in */
+ { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* route front mic to ADC1*/
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ /* Unmute DAC0~3 & spdif out*/
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* Unmute Mixer 14 (mic) 1c (Line in)*/
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* Unmute Stereo Mixer 15 */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step
+
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front)
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ { }
+};
+
/*
* generic initialization of ADC, input mixers and output mixers
*/
@@ -6561,6 +6681,9 @@
.config = ALC660_3ST },
{ .modelname = "3stack-dig", .config = ALC861_3ST_DIG },
{ .modelname = "6stack-dig", .config = ALC861_6ST_DIG },
+ { .modelname = "uniwill-m31", .config = ALC861_UNIWILL_M31},
+ { .pci_subvendor = 0x1584, .pci_subdevice = 0x9072,
+ .config = ALC861_UNIWILL_M31 },
{ .modelname = "auto", .config = ALC861_AUTO },
{}
};
@@ -6615,6 +6738,20 @@
.adc_nids = alc861_adc_nids,
.input_mux = &alc861_capture_source,
},
+ [ALC861_UNIWILL_M31] = {
+ .mixers = { alc861_uniwill_m31_mixer },
+ .init_verbs = { alc861_uniwill_m31_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc861_dac_nids),
+ .dac_nids = alc861_dac_nids,
+ .dig_out_nid = ALC861_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc861_uniwill_m31_modes),
+ .channel_mode = alc861_uniwill_m31_modes,
+ .need_dac_fix = 1,
+ .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
+ .adc_nids = alc861_adc_nids,
+ .input_mux = &alc861_capture_source,
+ },
+
};