USB: fsl_qe_udc: Fix QE USB controller initialization
qe_udc_reg_init() leaves the USB controller enabled before muram memory
initialized. Sometimes the uninitialized muram memory confuses the
controller, and it start sending the busy interrupts.
Fix this by disabling the controller, it will be enabled later by
the gadget driver, at bind time.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 064582f..1319f8f 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2452,8 +2452,12 @@
struct usb_ctlr __iomem *qe_usbregs;
qe_usbregs = udc->usb_regs;
- /* Init the usb register */
+ /* Spec says that we must enable the USB controller to change mode. */
out_8(&qe_usbregs->usb_usmod, 0x01);
+ /* Mode changed, now disable it, since muram isn't initialized yet. */
+ out_8(&qe_usbregs->usb_usmod, 0x00);
+
+ /* Initialize the rest. */
out_be16(&qe_usbregs->usb_usbmr, 0);
out_8(&qe_usbregs->usb_uscom, 0);
out_be16(&qe_usbregs->usb_usber, USBER_ALL_CLEAR);