| /* |
| * Copyright © 1997-2003 by The XFree86 Project, Inc. |
| * Copyright © 2007 Dave Airlie |
| * Copyright © 2007-2008 Intel Corporation |
| * Jesse Barnes <jesse.barnes@intel.com> |
| * Copyright 2005-2006 Luc Verhaegen |
| * Copyright (c) 2001, Andy Ritger aritger@nvidia.com |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Except as contained in this notice, the name of the copyright holder(s) |
| * and author(s) shall not be used in advertising or otherwise to promote |
| * the sale, use or other dealings in this Software without prior written |
| * authorization from the copyright holder(s) and author(s). |
| */ |
| |
| #include <linux/list.h> |
| #include <linux/list_sort.h> |
| #include <linux/export.h> |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc.h> |
| #include <video/of_videomode.h> |
| #include <video/videomode.h> |
| #include <drm/drm_modes.h> |
| |
| #include "drm_crtc_internal.h" |
| |
| /** |
| * drm_mode_debug_printmodeline - print a mode to dmesg |
| * @mode: mode to print |
| * |
| * Describe @mode using DRM_DEBUG. |
| */ |
| void drm_mode_debug_printmodeline(const struct drm_display_mode *mode) |
| { |
| DRM_DEBUG_KMS("Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d " |
| "0x%x 0x%x\n", |
| mode->base.id, mode->name, mode->vrefresh, mode->clock, |
| mode->hdisplay, mode->hsync_start, |
| mode->hsync_end, mode->htotal, |
| mode->vdisplay, mode->vsync_start, |
| mode->vsync_end, mode->vtotal, mode->type, mode->flags); |
| } |
| EXPORT_SYMBOL(drm_mode_debug_printmodeline); |
| |
| /** |
| * drm_mode_create - create a new display mode |
| * @dev: DRM device |
| * |
| * Create a new, cleared drm_display_mode with kzalloc, allocate an ID for it |
| * and return it. |
| * |
| * Returns: |
| * Pointer to new mode on success, NULL on error. |
| */ |
| struct drm_display_mode *drm_mode_create(struct drm_device *dev) |
| { |
| struct drm_display_mode *nmode; |
| |
| nmode = kzalloc(sizeof(struct drm_display_mode), GFP_KERNEL); |
| if (!nmode) |
| return NULL; |
| |
| if (drm_mode_object_get(dev, &nmode->base, DRM_MODE_OBJECT_MODE)) { |
| kfree(nmode); |
| return NULL; |
| } |
| |
| return nmode; |
| } |
| EXPORT_SYMBOL(drm_mode_create); |
| |
| /** |
| * drm_mode_destroy - remove a mode |
| * @dev: DRM device |
| * @mode: mode to remove |
| * |
| * Release @mode's unique ID, then free it @mode structure itself using kfree. |
| */ |
| void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode) |
| { |
| if (!mode) |
| return; |
| |
| drm_mode_object_put(dev, &mode->base); |
| |
| kfree(mode); |
| } |
| EXPORT_SYMBOL(drm_mode_destroy); |
| |
| /** |
| * drm_mode_probed_add - add a mode to a connector's probed_mode list |
| * @connector: connector the new mode |
| * @mode: mode data |
| * |
| * Add @mode to @connector's probed_mode list for later use. This list should |
| * then in a second step get filtered and all the modes actually supported by |
| * the hardware moved to the @connector's modes list. |
| */ |
| void drm_mode_probed_add(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| WARN_ON(!mutex_is_locked(&connector->dev->mode_config.mutex)); |
| |
| list_add_tail(&mode->head, &connector->probed_modes); |
| } |
| EXPORT_SYMBOL(drm_mode_probed_add); |
| |
| /** |
| * drm_cvt_mode -create a modeline based on the CVT algorithm |
| * @dev: drm device |
| * @hdisplay: hdisplay size |
| * @vdisplay: vdisplay size |
| * @vrefresh: vrefresh rate |
| * @reduced: whether to use reduced blanking |
| * @interlaced: whether to compute an interlaced mode |
| * @margins: whether to add margins (borders) |
| * |
| * This function is called to generate the modeline based on CVT algorithm |
| * according to the hdisplay, vdisplay, vrefresh. |
| * It is based from the VESA(TM) Coordinated Video Timing Generator by |
| * Graham Loveridge April 9, 2003 available at |
| * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls |
| * |
| * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c. |
| * What I have done is to translate it by using integer calculation. |
| * |
| * Returns: |
| * The modeline based on the CVT algorithm stored in a drm_display_mode object. |
| * The display mode object is allocated with drm_mode_create(). Returns NULL |
| * when no mode could be allocated. |
| */ |
| struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay, |
| int vdisplay, int vrefresh, |
| bool reduced, bool interlaced, bool margins) |
| { |
| #define HV_FACTOR 1000 |
| /* 1) top/bottom margin size (% of height) - default: 1.8, */ |
| #define CVT_MARGIN_PERCENTAGE 18 |
| /* 2) character cell horizontal granularity (pixels) - default 8 */ |
| #define CVT_H_GRANULARITY 8 |
| /* 3) Minimum vertical porch (lines) - default 3 */ |
| #define CVT_MIN_V_PORCH 3 |
| /* 4) Minimum number of vertical back porch lines - default 6 */ |
| #define CVT_MIN_V_BPORCH 6 |
| /* Pixel Clock step (kHz) */ |
| #define CVT_CLOCK_STEP 250 |
| struct drm_display_mode *drm_mode; |
| unsigned int vfieldrate, hperiod; |
| int hdisplay_rnd, hmargin, vdisplay_rnd, vmargin, vsync; |
| int interlace; |
| |
| /* allocate the drm_display_mode structure. If failure, we will |
| * return directly |
| */ |
| drm_mode = drm_mode_create(dev); |
| if (!drm_mode) |
| return NULL; |
| |
| /* the CVT default refresh rate is 60Hz */ |
| if (!vrefresh) |
| vrefresh = 60; |
| |
| /* the required field fresh rate */ |
| if (interlaced) |
| vfieldrate = vrefresh * 2; |
| else |
| vfieldrate = vrefresh; |
| |
| /* horizontal pixels */ |
| hdisplay_rnd = hdisplay - (hdisplay % CVT_H_GRANULARITY); |
| |
| /* determine the left&right borders */ |
| hmargin = 0; |
| if (margins) { |
| hmargin = hdisplay_rnd * CVT_MARGIN_PERCENTAGE / 1000; |
| hmargin -= hmargin % CVT_H_GRANULARITY; |
| } |
| /* find the total active pixels */ |
| drm_mode->hdisplay = hdisplay_rnd + 2 * hmargin; |
| |
| /* find the number of lines per field */ |
| if (interlaced) |
| vdisplay_rnd = vdisplay / 2; |
| else |
| vdisplay_rnd = vdisplay; |
| |
| /* find the top & bottom borders */ |
| vmargin = 0; |
| if (margins) |
| vmargin = vdisplay_rnd * CVT_MARGIN_PERCENTAGE / 1000; |
| |
| drm_mode->vdisplay = vdisplay + 2 * vmargin; |
| |
| /* Interlaced */ |
| if (interlaced) |
| interlace = 1; |
| else |
| interlace = 0; |
| |
| /* Determine VSync Width from aspect ratio */ |
| if (!(vdisplay % 3) && ((vdisplay * 4 / 3) == hdisplay)) |
| vsync = 4; |
| else if (!(vdisplay % 9) && ((vdisplay * 16 / 9) == hdisplay)) |
| vsync = 5; |
| else if (!(vdisplay % 10) && ((vdisplay * 16 / 10) == hdisplay)) |
| vsync = 6; |
| else if (!(vdisplay % 4) && ((vdisplay * 5 / 4) == hdisplay)) |
| vsync = 7; |
| else if (!(vdisplay % 9) && ((vdisplay * 15 / 9) == hdisplay)) |
| vsync = 7; |
| else /* custom */ |
| vsync = 10; |
| |
| if (!reduced) { |
| /* simplify the GTF calculation */ |
| /* 4) Minimum time of vertical sync + back porch interval (µs) |
| * default 550.0 |
| */ |
| int tmp1, tmp2; |
| #define CVT_MIN_VSYNC_BP 550 |
| /* 3) Nominal HSync width (% of line period) - default 8 */ |
| #define CVT_HSYNC_PERCENTAGE 8 |
| unsigned int hblank_percentage; |
| int vsyncandback_porch, vback_porch, hblank; |
| |
| /* estimated the horizontal period */ |
| tmp1 = HV_FACTOR * 1000000 - |
| CVT_MIN_VSYNC_BP * HV_FACTOR * vfieldrate; |
| tmp2 = (vdisplay_rnd + 2 * vmargin + CVT_MIN_V_PORCH) * 2 + |
| interlace; |
| hperiod = tmp1 * 2 / (tmp2 * vfieldrate); |
| |
| tmp1 = CVT_MIN_VSYNC_BP * HV_FACTOR / hperiod + 1; |
| /* 9. Find number of lines in sync + backporch */ |
| if (tmp1 < (vsync + CVT_MIN_V_PORCH)) |
| vsyncandback_porch = vsync + CVT_MIN_V_PORCH; |
| else |
| vsyncandback_porch = tmp1; |
| /* 10. Find number of lines in back porch */ |
| vback_porch = vsyncandback_porch - vsync; |
| drm_mode->vtotal = vdisplay_rnd + 2 * vmargin + |
| vsyncandback_porch + CVT_MIN_V_PORCH; |
| /* 5) Definition of Horizontal blanking time limitation */ |
| /* Gradient (%/kHz) - default 600 */ |
| #define CVT_M_FACTOR 600 |
| /* Offset (%) - default 40 */ |
| #define CVT_C_FACTOR 40 |
| /* Blanking time scaling factor - default 128 */ |
| #define CVT_K_FACTOR 128 |
| /* Scaling factor weighting - default 20 */ |
| #define CVT_J_FACTOR 20 |
| #define CVT_M_PRIME (CVT_M_FACTOR * CVT_K_FACTOR / 256) |
| #define CVT_C_PRIME ((CVT_C_FACTOR - CVT_J_FACTOR) * CVT_K_FACTOR / 256 + \ |
| CVT_J_FACTOR) |
| /* 12. Find ideal blanking duty cycle from formula */ |
| hblank_percentage = CVT_C_PRIME * HV_FACTOR - CVT_M_PRIME * |
| hperiod / 1000; |
| /* 13. Blanking time */ |
| if (hblank_percentage < 20 * HV_FACTOR) |
| hblank_percentage = 20 * HV_FACTOR; |
| hblank = drm_mode->hdisplay * hblank_percentage / |
| (100 * HV_FACTOR - hblank_percentage); |
| hblank -= hblank % (2 * CVT_H_GRANULARITY); |
| /* 14. find the total pixes per line */ |
| drm_mode->htotal = drm_mode->hdisplay + hblank; |
| drm_mode->hsync_end = drm_mode->hdisplay + hblank / 2; |
| drm_mode->hsync_start = drm_mode->hsync_end - |
| (drm_mode->htotal * CVT_HSYNC_PERCENTAGE) / 100; |
| drm_mode->hsync_start += CVT_H_GRANULARITY - |
| drm_mode->hsync_start % CVT_H_GRANULARITY; |
| /* fill the Vsync values */ |
| drm_mode->vsync_start = drm_mode->vdisplay + CVT_MIN_V_PORCH; |
| drm_mode->vsync_end = drm_mode->vsync_start + vsync; |
| } else { |
| /* Reduced blanking */ |
| /* Minimum vertical blanking interval time (µs)- default 460 */ |
| #define CVT_RB_MIN_VBLANK 460 |
| /* Fixed number of clocks for horizontal sync */ |
| #define CVT_RB_H_SYNC 32 |
| /* Fixed number of clocks for horizontal blanking */ |
| #define CVT_RB_H_BLANK 160 |
| /* Fixed number of lines for vertical front porch - default 3*/ |
| #define CVT_RB_VFPORCH 3 |
| int vbilines; |
| int tmp1, tmp2; |
| /* 8. Estimate Horizontal period. */ |
| tmp1 = HV_FACTOR * 1000000 - |
| CVT_RB_MIN_VBLANK * HV_FACTOR * vfieldrate; |
| tmp2 = vdisplay_rnd + 2 * vmargin; |
| hperiod = tmp1 / (tmp2 * vfieldrate); |
| /* 9. Find number of lines in vertical blanking */ |
| vbilines = CVT_RB_MIN_VBLANK * HV_FACTOR / hperiod + 1; |
| /* 10. Check if vertical blanking is sufficient */ |
| if (vbilines < (CVT_RB_VFPORCH + vsync + CVT_MIN_V_BPORCH)) |
| vbilines = CVT_RB_VFPORCH + vsync + CVT_MIN_V_BPORCH; |
| /* 11. Find total number of lines in vertical field */ |
| drm_mode->vtotal = vdisplay_rnd + 2 * vmargin + vbilines; |
| /* 12. Find total number of pixels in a line */ |
| drm_mode->htotal = drm_mode->hdisplay + CVT_RB_H_BLANK; |
| /* Fill in HSync values */ |
| drm_mode->hsync_end = drm_mode->hdisplay + CVT_RB_H_BLANK / 2; |
| drm_mode->hsync_start = drm_mode->hsync_end - CVT_RB_H_SYNC; |
| /* Fill in VSync values */ |
| drm_mode->vsync_start = drm_mode->vdisplay + CVT_RB_VFPORCH; |
| drm_mode->vsync_end = drm_mode->vsync_start + vsync; |
| } |
| /* 15/13. Find pixel clock frequency (kHz for xf86) */ |
| drm_mode->clock = drm_mode->htotal * HV_FACTOR * 1000 / hperiod; |
| drm_mode->clock -= drm_mode->clock % CVT_CLOCK_STEP; |
| /* 18/16. Find actual vertical frame frequency */ |
| /* ignore - just set the mode flag for interlaced */ |
| if (interlaced) { |
| drm_mode->vtotal *= 2; |
| drm_mode->flags |= DRM_MODE_FLAG_INTERLACE; |
| } |
| /* Fill the mode line name */ |
| drm_mode_set_name(drm_mode); |
| if (reduced) |
| drm_mode->flags |= (DRM_MODE_FLAG_PHSYNC | |
| DRM_MODE_FLAG_NVSYNC); |
| else |
| drm_mode->flags |= (DRM_MODE_FLAG_PVSYNC | |
| DRM_MODE_FLAG_NHSYNC); |
| |
| return drm_mode; |
| } |
| EXPORT_SYMBOL(drm_cvt_mode); |
| |
| /** |
| * drm_gtf_mode_complex - create the modeline based on the full GTF algorithm |
| * @dev: drm device |
| * @hdisplay: hdisplay size |
| * @vdisplay: vdisplay size |
| * @vrefresh: vrefresh rate. |
| * @interlaced: whether to compute an interlaced mode |
| * @margins: desired margin (borders) size |
| * @GTF_M: extended GTF formula parameters |
| * @GTF_2C: extended GTF formula parameters |
| * @GTF_K: extended GTF formula parameters |
| * @GTF_2J: extended GTF formula parameters |
| * |
| * GTF feature blocks specify C and J in multiples of 0.5, so we pass them |
| * in here multiplied by two. For a C of 40, pass in 80. |
| * |
| * Returns: |
| * The modeline based on the full GTF algorithm stored in a drm_display_mode object. |
| * The display mode object is allocated with drm_mode_create(). Returns NULL |
| * when no mode could be allocated. |
| */ |
| struct drm_display_mode * |
| drm_gtf_mode_complex(struct drm_device *dev, int hdisplay, int vdisplay, |
| int vrefresh, bool interlaced, int margins, |
| int GTF_M, int GTF_2C, int GTF_K, int GTF_2J) |
| { /* 1) top/bottom margin size (% of height) - default: 1.8, */ |
| #define GTF_MARGIN_PERCENTAGE 18 |
| /* 2) character cell horizontal granularity (pixels) - default 8 */ |
| #define GTF_CELL_GRAN 8 |
| /* 3) Minimum vertical porch (lines) - default 3 */ |
| #define GTF_MIN_V_PORCH 1 |
| /* width of vsync in lines */ |
| #define V_SYNC_RQD 3 |
| /* width of hsync as % of total line */ |
| #define H_SYNC_PERCENT 8 |
| /* min time of vsync + back porch (microsec) */ |
| #define MIN_VSYNC_PLUS_BP 550 |
| /* C' and M' are part of the Blanking Duty Cycle computation */ |
| #define GTF_C_PRIME ((((GTF_2C - GTF_2J) * GTF_K / 256) + GTF_2J) / 2) |
| #define GTF_M_PRIME (GTF_K * GTF_M / 256) |
| struct drm_display_mode *drm_mode; |
| unsigned int hdisplay_rnd, vdisplay_rnd, vfieldrate_rqd; |
| int top_margin, bottom_margin; |
| int interlace; |
| unsigned int hfreq_est; |
| int vsync_plus_bp, vback_porch; |
| unsigned int vtotal_lines, vfieldrate_est, hperiod; |
| unsigned int vfield_rate, vframe_rate; |
| int left_margin, right_margin; |
| unsigned int total_active_pixels, ideal_duty_cycle; |
| unsigned int hblank, total_pixels, pixel_freq; |
| int hsync, hfront_porch, vodd_front_porch_lines; |
| unsigned int tmp1, tmp2; |
| |
| drm_mode = drm_mode_create(dev); |
| if (!drm_mode) |
| return NULL; |
| |
| /* 1. In order to give correct results, the number of horizontal |
| * pixels requested is first processed to ensure that it is divisible |
| * by the character size, by rounding it to the nearest character |
| * cell boundary: |
| */ |
| hdisplay_rnd = (hdisplay + GTF_CELL_GRAN / 2) / GTF_CELL_GRAN; |
| hdisplay_rnd = hdisplay_rnd * GTF_CELL_GRAN; |
| |
| /* 2. If interlace is requested, the number of vertical lines assumed |
| * by the calculation must be halved, as the computation calculates |
| * the number of vertical lines per field. |
| */ |
| if (interlaced) |
| vdisplay_rnd = vdisplay / 2; |
| else |
| vdisplay_rnd = vdisplay; |
| |
| /* 3. Find the frame rate required: */ |
| if (interlaced) |
| vfieldrate_rqd = vrefresh * 2; |
| else |
| vfieldrate_rqd = vrefresh; |
| |
| /* 4. Find number of lines in Top margin: */ |
| top_margin = 0; |
| if (margins) |
| top_margin = (vdisplay_rnd * GTF_MARGIN_PERCENTAGE + 500) / |
| 1000; |
| /* 5. Find number of lines in bottom margin: */ |
| bottom_margin = top_margin; |
| |
| /* 6. If interlace is required, then set variable interlace: */ |
| if (interlaced) |
| interlace = 1; |
| else |
| interlace = 0; |
| |
| /* 7. Estimate the Horizontal frequency */ |
| { |
| tmp1 = (1000000 - MIN_VSYNC_PLUS_BP * vfieldrate_rqd) / 500; |
| tmp2 = (vdisplay_rnd + 2 * top_margin + GTF_MIN_V_PORCH) * |
| 2 + interlace; |
| hfreq_est = (tmp2 * 1000 * vfieldrate_rqd) / tmp1; |
| } |
| |
| /* 8. Find the number of lines in V sync + back porch */ |
| /* [V SYNC+BP] = RINT(([MIN VSYNC+BP] * hfreq_est / 1000000)) */ |
| vsync_plus_bp = MIN_VSYNC_PLUS_BP * hfreq_est / 1000; |
| vsync_plus_bp = (vsync_plus_bp + 500) / 1000; |
| /* 9. Find the number of lines in V back porch alone: */ |
| vback_porch = vsync_plus_bp - V_SYNC_RQD; |
| /* 10. Find the total number of lines in Vertical field period: */ |
| vtotal_lines = vdisplay_rnd + top_margin + bottom_margin + |
| vsync_plus_bp + GTF_MIN_V_PORCH; |
| /* 11. Estimate the Vertical field frequency: */ |
| vfieldrate_est = hfreq_est / vtotal_lines; |
| /* 12. Find the actual horizontal period: */ |
| hperiod = 1000000 / (vfieldrate_rqd * vtotal_lines); |
| |
| /* 13. Find the actual Vertical field frequency: */ |
| vfield_rate = hfreq_est / vtotal_lines; |
| /* 14. Find the Vertical frame frequency: */ |
| if (interlaced) |
| vframe_rate = vfield_rate / 2; |
| else |
| vframe_rate = vfield_rate; |
| /* 15. Find number of pixels in left margin: */ |
| if (margins) |
| left_margin = (hdisplay_rnd * GTF_MARGIN_PERCENTAGE + 500) / |
| 1000; |
| else |
| left_margin = 0; |
| |
| /* 16.Find number of pixels in right margin: */ |
| right_margin = left_margin; |
| /* 17.Find total number of active pixels in image and left and right */ |
| total_active_pixels = hdisplay_rnd + left_margin + right_margin; |
| /* 18.Find the ideal blanking duty cycle from blanking duty cycle */ |
| ideal_duty_cycle = GTF_C_PRIME * 1000 - |
| (GTF_M_PRIME * 1000000 / hfreq_est); |
| /* 19.Find the number of pixels in the blanking time to the nearest |
| * double character cell: */ |
| hblank = total_active_pixels * ideal_duty_cycle / |
| (100000 - ideal_duty_cycle); |
| hblank = (hblank + GTF_CELL_GRAN) / (2 * GTF_CELL_GRAN); |
| hblank = hblank * 2 * GTF_CELL_GRAN; |
| /* 20.Find total number of pixels: */ |
| total_pixels = total_active_pixels + hblank; |
| /* 21.Find pixel clock frequency: */ |
| pixel_freq = total_pixels * hfreq_est / 1000; |
| /* Stage 1 computations are now complete; I should really pass |
| * the results to another function and do the Stage 2 computations, |
| * but I only need a few more values so I'll just append the |
| * computations here for now */ |
| /* 17. Find the number of pixels in the horizontal sync period: */ |
| hsync = H_SYNC_PERCENT * total_pixels / 100; |
| hsync = (hsync + GTF_CELL_GRAN / 2) / GTF_CELL_GRAN; |
| hsync = hsync * GTF_CELL_GRAN; |
| /* 18. Find the number of pixels in horizontal front porch period */ |
| hfront_porch = hblank / 2 - hsync; |
| /* 36. Find the number of lines in the odd front porch period: */ |
| vodd_front_porch_lines = GTF_MIN_V_PORCH ; |
| |
| /* finally, pack the results in the mode struct */ |
| drm_mode->hdisplay = hdisplay_rnd; |
| drm_mode->hsync_start = hdisplay_rnd + hfront_porch; |
| drm_mode->hsync_end = drm_mode->hsync_start + hsync; |
| drm_mode->htotal = total_pixels; |
| drm_mode->vdisplay = vdisplay_rnd; |
| drm_mode->vsync_start = vdisplay_rnd + vodd_front_porch_lines; |
| drm_mode->vsync_end = drm_mode->vsync_start + V_SYNC_RQD; |
| drm_mode->vtotal = vtotal_lines; |
| |
| drm_mode->clock = pixel_freq; |
| |
| if (interlaced) { |
| drm_mode->vtotal *= 2; |
| drm_mode->flags |= DRM_MODE_FLAG_INTERLACE; |
| } |
| |
| drm_mode_set_name(drm_mode); |
| if (GTF_M == 600 && GTF_2C == 80 && GTF_K == 128 && GTF_2J == 40) |
| drm_mode->flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC; |
| else |
| drm_mode->flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC; |
| |
| return drm_mode; |
| } |
| EXPORT_SYMBOL(drm_gtf_mode_complex); |
| |
| /** |
| * drm_gtf_mode - create the modeline based on the GTF algorithm |
| * @dev: drm device |
| * @hdisplay: hdisplay size |
| * @vdisplay: vdisplay size |
| * @vrefresh: vrefresh rate. |
| * @interlaced: whether to compute an interlaced mode |
| * @margins: desired margin (borders) size |
| * |
| * return the modeline based on GTF algorithm |
| * |
| * This function is to create the modeline based on the GTF algorithm. |
| * Generalized Timing Formula is derived from: |
| * GTF Spreadsheet by Andy Morrish (1/5/97) |
| * available at http://www.vesa.org |
| * |
| * And it is copied from the file of xserver/hw/xfree86/modes/xf86gtf.c. |
| * What I have done is to translate it by using integer calculation. |
| * I also refer to the function of fb_get_mode in the file of |
| * drivers/video/fbmon.c |
| * |
| * Standard GTF parameters: |
| * M = 600 |
| * C = 40 |
| * K = 128 |
| * J = 20 |
| * |
| * Returns: |
| * The modeline based on the GTF algorithm stored in a drm_display_mode object. |
| * The display mode object is allocated with drm_mode_create(). Returns NULL |
| * when no mode could be allocated. |
| */ |
| struct drm_display_mode * |
| drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, |
| bool interlaced, int margins) |
| { |
| return drm_gtf_mode_complex(dev, hdisplay, vdisplay, vrefresh, |
| interlaced, margins, |
| 600, 40 * 2, 128, 20 * 2); |
| } |
| EXPORT_SYMBOL(drm_gtf_mode); |
| |
| #ifdef CONFIG_VIDEOMODE_HELPERS |
| /** |
| * drm_display_mode_from_videomode - fill in @dmode using @vm, |
| * @vm: videomode structure to use as source |
| * @dmode: drm_display_mode structure to use as destination |
| * |
| * Fills out @dmode using the display mode specified in @vm. |
| */ |
| void drm_display_mode_from_videomode(const struct videomode *vm, |
| struct drm_display_mode *dmode) |
| { |
| dmode->hdisplay = vm->hactive; |
| dmode->hsync_start = dmode->hdisplay + vm->hfront_porch; |
| dmode->hsync_end = dmode->hsync_start + vm->hsync_len; |
| dmode->htotal = dmode->hsync_end + vm->hback_porch; |
| |
| dmode->vdisplay = vm->vactive; |
| dmode->vsync_start = dmode->vdisplay + vm->vfront_porch; |
| dmode->vsync_end = dmode->vsync_start + vm->vsync_len; |
| dmode->vtotal = dmode->vsync_end + vm->vback_porch; |
| |
| dmode->clock = vm->pixelclock / 1000; |
| |
| dmode->flags = 0; |
| if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH) |
| dmode->flags |= DRM_MODE_FLAG_PHSYNC; |
| else if (vm->flags & DISPLAY_FLAGS_HSYNC_LOW) |
| dmode->flags |= DRM_MODE_FLAG_NHSYNC; |
| if (vm->flags & DISPLAY_FLAGS_VSYNC_HIGH) |
| dmode->flags |= DRM_MODE_FLAG_PVSYNC; |
| else if (vm->flags & DISPLAY_FLAGS_VSYNC_LOW) |
| dmode->flags |= DRM_MODE_FLAG_NVSYNC; |
| if (vm->flags & DISPLAY_FLAGS_INTERLACED) |
| dmode->flags |= DRM_MODE_FLAG_INTERLACE; |
| if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN) |
| dmode->flags |= DRM_MODE_FLAG_DBLSCAN; |
| if (vm->flags & DISPLAY_FLAGS_DOUBLECLK) |
| dmode->flags |= DRM_MODE_FLAG_DBLCLK; |
| drm_mode_set_name(dmode); |
| } |
| EXPORT_SYMBOL_GPL(drm_display_mode_from_videomode); |
| |
| #ifdef CONFIG_OF |
| /** |
| * of_get_drm_display_mode - get a drm_display_mode from devicetree |
| * @np: device_node with the timing specification |
| * @dmode: will be set to the return value |
| * @index: index into the list of display timings in devicetree |
| * |
| * This function is expensive and should only be used, if only one mode is to be |
| * read from DT. To get multiple modes start with of_get_display_timings and |
| * work with that instead. |
| * |
| * Returns: |
| * 0 on success, a negative errno code when no of videomode node was found. |
| */ |
| int of_get_drm_display_mode(struct device_node *np, |
| struct drm_display_mode *dmode, int index) |
| { |
| struct videomode vm; |
| int ret; |
| |
| ret = of_get_videomode(np, &vm, index); |
| if (ret) |
| return ret; |
| |
| drm_display_mode_from_videomode(&vm, dmode); |
| |
| pr_debug("%s: got %dx%d display mode from %s\n", |
| of_node_full_name(np), vm.hactive, vm.vactive, np->name); |
| drm_mode_debug_printmodeline(dmode); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(of_get_drm_display_mode); |
| #endif /* CONFIG_OF */ |
| #endif /* CONFIG_VIDEOMODE_HELPERS */ |
| |
| /** |
| * drm_mode_set_name - set the name on a mode |
| * @mode: name will be set in this mode |
| * |
| * Set the name of @mode to a standard format which is <hdisplay>x<vdisplay> |
| * with an optional 'i' suffix for interlaced modes. |
| */ |
| void drm_mode_set_name(struct drm_display_mode *mode) |
| { |
| bool interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE); |
| |
| snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d%s", |
| mode->hdisplay, mode->vdisplay, |
| interlaced ? "i" : ""); |
| } |
| EXPORT_SYMBOL(drm_mode_set_name); |
| |
| /** drm_mode_hsync - get the hsync of a mode |
| * @mode: mode |
| * |
| * Returns: |
| * @modes's hsync rate in kHz, rounded to the nearest integer. Calculates the |
| * value first if it is not yet set. |
| */ |
| int drm_mode_hsync(const struct drm_display_mode *mode) |
| { |
| unsigned int calc_val; |
| |
| if (mode->hsync) |
| return mode->hsync; |
| |
| if (mode->htotal < 0) |
| return 0; |
| |
| calc_val = (mode->clock * 1000) / mode->htotal; /* hsync in Hz */ |
| calc_val += 500; /* round to 1000Hz */ |
| calc_val /= 1000; /* truncate to kHz */ |
| |
| return calc_val; |
| } |
| EXPORT_SYMBOL(drm_mode_hsync); |
| |
| /** |
| * drm_mode_vrefresh - get the vrefresh of a mode |
| * @mode: mode |
| * |
| * Returns: |
| * @modes's vrefresh rate in Hz, rounded to the nearest integer. Calculates the |
| * value first if it is not yet set. |
| */ |
| int drm_mode_vrefresh(const struct drm_display_mode *mode) |
| { |
| int refresh = 0; |
| unsigned int calc_val; |
| |
| if (mode->vrefresh > 0) |
| refresh = mode->vrefresh; |
| else if (mode->htotal > 0 && mode->vtotal > 0) { |
| int vtotal; |
| vtotal = mode->vtotal; |
| /* work out vrefresh the value will be x1000 */ |
| calc_val = (mode->clock * 1000); |
| calc_val /= mode->htotal; |
| refresh = (calc_val + vtotal / 2) / vtotal; |
| |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) |
| refresh *= 2; |
| if (mode->flags & DRM_MODE_FLAG_DBLSCAN) |
| refresh /= 2; |
| if (mode->vscan > 1) |
| refresh /= mode->vscan; |
| } |
| return refresh; |
| } |
| EXPORT_SYMBOL(drm_mode_vrefresh); |
| |
| /** |
| * drm_mode_set_crtcinfo - set CRTC modesetting timing parameters |
| * @p: mode |
| * @adjust_flags: a combination of adjustment flags |
| * |
| * Setup the CRTC modesetting timing parameters for @p, adjusting if necessary. |
| * |
| * - The CRTC_INTERLACE_HALVE_V flag can be used to halve vertical timings of |
| * interlaced modes. |
| * - The CRTC_STEREO_DOUBLE flag can be used to compute the timings for |
| * buffers containing two eyes (only adjust the timings when needed, eg. for |
| * "frame packing" or "side by side full"). |
| * - The CRTC_NO_DBLSCAN and CRTC_NO_VSCAN flags request that adjustment *not* |
| * be performed for doublescan and vscan > 1 modes respectively. |
| */ |
| void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags) |
| { |
| if ((p == NULL) || ((p->type & DRM_MODE_TYPE_CRTC_C) == DRM_MODE_TYPE_BUILTIN)) |
| return; |
| |
| p->crtc_clock = p->clock; |
| p->crtc_hdisplay = p->hdisplay; |
| p->crtc_hsync_start = p->hsync_start; |
| p->crtc_hsync_end = p->hsync_end; |
| p->crtc_htotal = p->htotal; |
| p->crtc_hskew = p->hskew; |
| p->crtc_vdisplay = p->vdisplay; |
| p->crtc_vsync_start = p->vsync_start; |
| p->crtc_vsync_end = p->vsync_end; |
| p->crtc_vtotal = p->vtotal; |
| |
| if (p->flags & DRM_MODE_FLAG_INTERLACE) { |
| if (adjust_flags & CRTC_INTERLACE_HALVE_V) { |
| p->crtc_vdisplay /= 2; |
| p->crtc_vsync_start /= 2; |
| p->crtc_vsync_end /= 2; |
| p->crtc_vtotal /= 2; |
| } |
| } |
| |
| if (!(adjust_flags & CRTC_NO_DBLSCAN)) { |
| if (p->flags & DRM_MODE_FLAG_DBLSCAN) { |
| p->crtc_vdisplay *= 2; |
| p->crtc_vsync_start *= 2; |
| p->crtc_vsync_end *= 2; |
| p->crtc_vtotal *= 2; |
| } |
| } |
| |
| if (!(adjust_flags & CRTC_NO_VSCAN)) { |
| if (p->vscan > 1) { |
| p->crtc_vdisplay *= p->vscan; |
| p->crtc_vsync_start *= p->vscan; |
| p->crtc_vsync_end *= p->vscan; |
| p->crtc_vtotal *= p->vscan; |
| } |
| } |
| |
| if (adjust_flags & CRTC_STEREO_DOUBLE) { |
| unsigned int layout = p->flags & DRM_MODE_FLAG_3D_MASK; |
| |
| switch (layout) { |
| case DRM_MODE_FLAG_3D_FRAME_PACKING: |
| p->crtc_clock *= 2; |
| p->crtc_vdisplay += p->crtc_vtotal; |
| p->crtc_vsync_start += p->crtc_vtotal; |
| p->crtc_vsync_end += p->crtc_vtotal; |
| p->crtc_vtotal += p->crtc_vtotal; |
| break; |
| } |
| } |
| |
| p->crtc_vblank_start = min(p->crtc_vsync_start, p->crtc_vdisplay); |
| p->crtc_vblank_end = max(p->crtc_vsync_end, p->crtc_vtotal); |
| p->crtc_hblank_start = min(p->crtc_hsync_start, p->crtc_hdisplay); |
| p->crtc_hblank_end = max(p->crtc_hsync_end, p->crtc_htotal); |
| } |
| EXPORT_SYMBOL(drm_mode_set_crtcinfo); |
| |
| /** |
| * drm_mode_copy - copy the mode |
| * @dst: mode to overwrite |
| * @src: mode to copy |
| * |
| * Copy an existing mode into another mode, preserving the object id and |
| * list head of the destination mode. |
| */ |
| void drm_mode_copy(struct drm_display_mode *dst, const struct drm_display_mode *src) |
| { |
| int id = dst->base.id; |
| struct list_head head = dst->head; |
| |
| *dst = *src; |
| dst->base.id = id; |
| dst->head = head; |
| } |
| EXPORT_SYMBOL(drm_mode_copy); |
| |
| /** |
| * drm_mode_duplicate - allocate and duplicate an existing mode |
| * @dev: drm_device to allocate the duplicated mode for |
| * @mode: mode to duplicate |
| * |
| * Just allocate a new mode, copy the existing mode into it, and return |
| * a pointer to it. Used to create new instances of established modes. |
| * |
| * Returns: |
| * Pointer to duplicated mode on success, NULL on error. |
| */ |
| struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, |
| const struct drm_display_mode *mode) |
| { |
| struct drm_display_mode *nmode; |
| |
| nmode = drm_mode_create(dev); |
| if (!nmode) |
| return NULL; |
| |
| drm_mode_copy(nmode, mode); |
| |
| return nmode; |
| } |
| EXPORT_SYMBOL(drm_mode_duplicate); |
| |
| /** |
| * drm_mode_equal - test modes for equality |
| * @mode1: first mode |
| * @mode2: second mode |
| * |
| * Check to see if @mode1 and @mode2 are equivalent. |
| * |
| * Returns: |
| * True if the modes are equal, false otherwise. |
| */ |
| bool drm_mode_equal(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) |
| { |
| /* do clock check convert to PICOS so fb modes get matched |
| * the same */ |
| if (mode1->clock && mode2->clock) { |
| if (KHZ2PICOS(mode1->clock) != KHZ2PICOS(mode2->clock)) |
| return false; |
| } else if (mode1->clock != mode2->clock) |
| return false; |
| |
| if ((mode1->flags & DRM_MODE_FLAG_3D_MASK) != |
| (mode2->flags & DRM_MODE_FLAG_3D_MASK)) |
| return false; |
| |
| return drm_mode_equal_no_clocks_no_stereo(mode1, mode2); |
| } |
| EXPORT_SYMBOL(drm_mode_equal); |
| |
| /** |
| * drm_mode_equal_no_clocks_no_stereo - test modes for equality |
| * @mode1: first mode |
| * @mode2: second mode |
| * |
| * Check to see if @mode1 and @mode2 are equivalent, but |
| * don't check the pixel clocks nor the stereo layout. |
| * |
| * Returns: |
| * True if the modes are equal, false otherwise. |
| */ |
| bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1, |
| const struct drm_display_mode *mode2) |
| { |
| if (mode1->hdisplay == mode2->hdisplay && |
| mode1->hsync_start == mode2->hsync_start && |
| mode1->hsync_end == mode2->hsync_end && |
| mode1->htotal == mode2->htotal && |
| mode1->hskew == mode2->hskew && |
| mode1->vdisplay == mode2->vdisplay && |
| mode1->vsync_start == mode2->vsync_start && |
| mode1->vsync_end == mode2->vsync_end && |
| mode1->vtotal == mode2->vtotal && |
| mode1->vscan == mode2->vscan && |
| (mode1->flags & ~DRM_MODE_FLAG_3D_MASK) == |
| (mode2->flags & ~DRM_MODE_FLAG_3D_MASK)) |
| return true; |
| |
| return false; |
| } |
| EXPORT_SYMBOL(drm_mode_equal_no_clocks_no_stereo); |
| |
| /** |
| * drm_mode_validate_size - make sure modes adhere to size constraints |
| * @dev: DRM device |
| * @mode_list: list of modes to check |
| * @maxX: maximum width |
| * @maxY: maximum height |
| * |
| * This function is a helper which can be used to validate modes against size |
| * limitations of the DRM device/connector. If a mode is too big its status |
| * member is updated with the appropriate validation failure code. The list |
| * itself is not changed. |
| */ |
| void drm_mode_validate_size(struct drm_device *dev, |
| struct list_head *mode_list, |
| int maxX, int maxY) |
| { |
| struct drm_display_mode *mode; |
| |
| list_for_each_entry(mode, mode_list, head) { |
| if (maxX > 0 && mode->hdisplay > maxX) |
| mode->status = MODE_VIRTUAL_X; |
| |
| if (maxY > 0 && mode->vdisplay > maxY) |
| mode->status = MODE_VIRTUAL_Y; |
| } |
| } |
| EXPORT_SYMBOL(drm_mode_validate_size); |
| |
| /** |
| * drm_mode_prune_invalid - remove invalid modes from mode list |
| * @dev: DRM device |
| * @mode_list: list of modes to check |
| * @verbose: be verbose about it |
| * |
| * This helper function can be used to prune a display mode list after |
| * validation has been completed. All modes who's status is not MODE_OK will be |
| * removed from the list, and if @verbose the status code and mode name is also |
| * printed to dmesg. |
| */ |
| void drm_mode_prune_invalid(struct drm_device *dev, |
| struct list_head *mode_list, bool verbose) |
| { |
| struct drm_display_mode *mode, *t; |
| |
| list_for_each_entry_safe(mode, t, mode_list, head) { |
| if (mode->status != MODE_OK) { |
| list_del(&mode->head); |
| if (verbose) { |
| drm_mode_debug_printmodeline(mode); |
| DRM_DEBUG_KMS("Not using %s mode %d\n", |
| mode->name, mode->status); |
| } |
| drm_mode_destroy(dev, mode); |
| } |
| } |
| } |
| EXPORT_SYMBOL(drm_mode_prune_invalid); |
| |
| /** |
| * drm_mode_compare - compare modes for favorability |
| * @priv: unused |
| * @lh_a: list_head for first mode |
| * @lh_b: list_head for second mode |
| * |
| * Compare two modes, given by @lh_a and @lh_b, returning a value indicating |
| * which is better. |
| * |
| * Returns: |
| * Negative if @lh_a is better than @lh_b, zero if they're equivalent, or |
| * positive if @lh_b is better than @lh_a. |
| */ |
| static int drm_mode_compare(void *priv, struct list_head *lh_a, struct list_head *lh_b) |
| { |
| struct drm_display_mode *a = list_entry(lh_a, struct drm_display_mode, head); |
| struct drm_display_mode *b = list_entry(lh_b, struct drm_display_mode, head); |
| int diff; |
| |
| diff = ((b->type & DRM_MODE_TYPE_PREFERRED) != 0) - |
| ((a->type & DRM_MODE_TYPE_PREFERRED) != 0); |
| if (diff) |
| return diff; |
| diff = b->hdisplay * b->vdisplay - a->hdisplay * a->vdisplay; |
| if (diff) |
| return diff; |
| |
| diff = b->vrefresh - a->vrefresh; |
| if (diff) |
| return diff; |
| |
| diff = b->clock - a->clock; |
| return diff; |
| } |
| |
| /** |
| * drm_mode_sort - sort mode list |
| * @mode_list: list of drm_display_mode structures to sort |
| * |
| * Sort @mode_list by favorability, moving good modes to the head of the list. |
| */ |
| void drm_mode_sort(struct list_head *mode_list) |
| { |
| list_sort(NULL, mode_list, drm_mode_compare); |
| } |
| EXPORT_SYMBOL(drm_mode_sort); |
| |
| /** |
| * drm_mode_connector_list_update - update the mode list for the connector |
| * @connector: the connector to update |
| * @merge_type_bits: whether to merge or overright type bits. |
| * |
| * This moves the modes from the @connector probed_modes list |
| * to the actual mode list. It compares the probed mode against the current |
| * list and only adds different/new modes. |
| * |
| * This is just a helper functions doesn't validate any modes itself and also |
| * doesn't prune any invalid modes. Callers need to do that themselves. |
| */ |
| void drm_mode_connector_list_update(struct drm_connector *connector, |
| bool merge_type_bits) |
| { |
| struct drm_display_mode *mode; |
| struct drm_display_mode *pmode, *pt; |
| int found_it; |
| |
| WARN_ON(!mutex_is_locked(&connector->dev->mode_config.mutex)); |
| |
| list_for_each_entry_safe(pmode, pt, &connector->probed_modes, |
| head) { |
| found_it = 0; |
| /* go through current modes checking for the new probed mode */ |
| list_for_each_entry(mode, &connector->modes, head) { |
| if (drm_mode_equal(pmode, mode)) { |
| found_it = 1; |
| /* if equal delete the probed mode */ |
| mode->status = pmode->status; |
| /* Merge type bits together */ |
| if (merge_type_bits) |
| mode->type |= pmode->type; |
| else |
| mode->type = pmode->type; |
| list_del(&pmode->head); |
| drm_mode_destroy(connector->dev, pmode); |
| break; |
| } |
| } |
| |
| if (!found_it) { |
| list_move_tail(&pmode->head, &connector->modes); |
| } |
| } |
| } |
| EXPORT_SYMBOL(drm_mode_connector_list_update); |
| |
| /** |
| * drm_mode_parse_command_line_for_connector - parse command line modeline for connector |
| * @mode_option: optional per connector mode option |
| * @connector: connector to parse modeline for |
| * @mode: preallocated drm_cmdline_mode structure to fill out |
| * |
| * This parses @mode_option command line modeline for modes and options to |
| * configure the connector. If @mode_option is NULL the default command line |
| * modeline in fb_mode_option will be parsed instead. |
| * |
| * This uses the same parameters as the fb modedb.c, except for an extra |
| * force-enable, force-enable-digital and force-disable bit at the end: |
| * |
| * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd] |
| * |
| * The intermediate drm_cmdline_mode structure is required to store additional |
| * options from the command line modline like the force-enabel/disable flag. |
| * |
| * Returns: |
| * True if a valid modeline has been parsed, false otherwise. |
| */ |
| bool drm_mode_parse_command_line_for_connector(const char *mode_option, |
| struct drm_connector *connector, |
| struct drm_cmdline_mode *mode) |
| { |
| const char *name; |
| unsigned int namelen; |
| bool res_specified = false, bpp_specified = false, refresh_specified = false; |
| unsigned int xres = 0, yres = 0, bpp = 32, refresh = 0; |
| bool yres_specified = false, cvt = false, rb = false; |
| bool interlace = false, margins = false, was_digit = false; |
| int i; |
| enum drm_connector_force force = DRM_FORCE_UNSPECIFIED; |
| |
| #ifdef CONFIG_FB |
| if (!mode_option) |
| mode_option = fb_mode_option; |
| #endif |
| |
| if (!mode_option) { |
| mode->specified = false; |
| return false; |
| } |
| |
| name = mode_option; |
| namelen = strlen(name); |
| for (i = namelen-1; i >= 0; i--) { |
| switch (name[i]) { |
| case '@': |
| if (!refresh_specified && !bpp_specified && |
| !yres_specified && !cvt && !rb && was_digit) { |
| refresh = simple_strtol(&name[i+1], NULL, 10); |
| refresh_specified = true; |
| was_digit = false; |
| } else |
| goto done; |
| break; |
| case '-': |
| if (!bpp_specified && !yres_specified && !cvt && |
| !rb && was_digit) { |
| bpp = simple_strtol(&name[i+1], NULL, 10); |
| bpp_specified = true; |
| was_digit = false; |
| } else |
| goto done; |
| break; |
| case 'x': |
| if (!yres_specified && was_digit) { |
| yres = simple_strtol(&name[i+1], NULL, 10); |
| yres_specified = true; |
| was_digit = false; |
| } else |
| goto done; |
| break; |
| case '0' ... '9': |
| was_digit = true; |
| break; |
| case 'M': |
| if (yres_specified || cvt || was_digit) |
| goto done; |
| cvt = true; |
| break; |
| case 'R': |
| if (yres_specified || cvt || rb || was_digit) |
| goto done; |
| rb = true; |
| break; |
| case 'm': |
| if (cvt || yres_specified || was_digit) |
| goto done; |
| margins = true; |
| break; |
| case 'i': |
| if (cvt || yres_specified || was_digit) |
| goto done; |
| interlace = true; |
| break; |
| case 'e': |
| if (yres_specified || bpp_specified || refresh_specified || |
| was_digit || (force != DRM_FORCE_UNSPECIFIED)) |
| goto done; |
| |
| force = DRM_FORCE_ON; |
| break; |
| case 'D': |
| if (yres_specified || bpp_specified || refresh_specified || |
| was_digit || (force != DRM_FORCE_UNSPECIFIED)) |
| goto done; |
| |
| if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) && |
| (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB)) |
| force = DRM_FORCE_ON; |
| else |
| force = DRM_FORCE_ON_DIGITAL; |
| break; |
| case 'd': |
| if (yres_specified || bpp_specified || refresh_specified || |
| was_digit || (force != DRM_FORCE_UNSPECIFIED)) |
| goto done; |
| |
| force = DRM_FORCE_OFF; |
| break; |
| default: |
| goto done; |
| } |
| } |
| |
| if (i < 0 && yres_specified) { |
| char *ch; |
| xres = simple_strtol(name, &ch, 10); |
| if ((ch != NULL) && (*ch == 'x')) |
| res_specified = true; |
| else |
| i = ch - name; |
| } else if (!yres_specified && was_digit) { |
| /* catch mode that begins with digits but has no 'x' */ |
| i = 0; |
| } |
| done: |
| if (i >= 0) { |
| printk(KERN_WARNING |
| "parse error at position %i in video mode '%s'\n", |
| i, name); |
| mode->specified = false; |
| return false; |
| } |
| |
| if (res_specified) { |
| mode->specified = true; |
| mode->xres = xres; |
| mode->yres = yres; |
| } |
| |
| if (refresh_specified) { |
| mode->refresh_specified = true; |
| mode->refresh = refresh; |
| } |
| |
| if (bpp_specified) { |
| mode->bpp_specified = true; |
| mode->bpp = bpp; |
| } |
| mode->rb = rb; |
| mode->cvt = cvt; |
| mode->interlace = interlace; |
| mode->margins = margins; |
| mode->force = force; |
| |
| return true; |
| } |
| EXPORT_SYMBOL(drm_mode_parse_command_line_for_connector); |
| |
| /** |
| * drm_mode_create_from_cmdline_mode - convert a command line modeline into a DRM display mode |
| * @dev: DRM device to create the new mode for |
| * @cmd: input command line modeline |
| * |
| * Returns: |
| * Pointer to converted mode on success, NULL on error. |
| */ |
| struct drm_display_mode * |
| drm_mode_create_from_cmdline_mode(struct drm_device *dev, |
| struct drm_cmdline_mode *cmd) |
| { |
| struct drm_display_mode *mode; |
| |
| if (cmd->cvt) |
| mode = drm_cvt_mode(dev, |
| cmd->xres, cmd->yres, |
| cmd->refresh_specified ? cmd->refresh : 60, |
| cmd->rb, cmd->interlace, |
| cmd->margins); |
| else |
| mode = drm_gtf_mode(dev, |
| cmd->xres, cmd->yres, |
| cmd->refresh_specified ? cmd->refresh : 60, |
| cmd->interlace, |
| cmd->margins); |
| if (!mode) |
| return NULL; |
| |
| mode->type |= DRM_MODE_TYPE_USERDEF; |
| drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); |
| return mode; |
| } |
| EXPORT_SYMBOL(drm_mode_create_from_cmdline_mode); |