[MIPS] txx9tmr clockevent/clocksource driver
Convert jmr3927_clock_event_device to more generic
txx9tmr_clock_event_device which supports one-shot mode. The
txx9tmr_clock_event_device can be used for TX49 too if the cp0 timer
interrupt was not available.
Convert jmr3927_hpt_read to txx9_clocksource driver which does not
depends jiffies anymore. The txx9_clocksource itself can be used for
TX49, but normally TX49 uses higher precision clocksource_mips.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
index edb9e59..06e01c8 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/jmr3927/rbhma3100/setup.c
@@ -27,17 +27,13 @@
* Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
*/
-#include <linux/clockchips.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
-#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/ide.h>
-#include <linux/irq.h>
#include <linux/ioport.h>
-#include <linux/param.h> /* for HZ */
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
@@ -48,17 +44,13 @@
#endif
#include <asm/addrspace.h>
-#include <asm/time.h>
+#include <asm/txx9tmr.h>
#include <asm/reboot.h>
#include <asm/jmr3927/jmr3927.h>
#include <asm/mipsregs.h>
extern void puts(const char *cp);
-/* Tick Timer divider */
-#define JMR3927_TIMER_CCD 0 /* 1/2 */
-#define JMR3927_TIMER_CLK (JMR3927_IMCLK / (2 << JMR3927_TIMER_CCD))
-
/* don't enable - see errata */
static int jmr3927_ccfg_toeon;
@@ -93,66 +85,12 @@
while (1);
}
-static cycle_t jmr3927_hpt_read(void)
-{
- /* We assume this function is called xtime_lock held. */
- return jiffies * (JMR3927_TIMER_CLK / HZ) + jmr3927_tmrptr->trr;
-}
-
-static void jmr3927_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- /* Nothing to do here */
-}
-
-struct clock_event_device jmr3927_clock_event_device = {
- .name = "MIPS",
- .features = CLOCK_EVT_FEAT_PERIODIC,
- .shift = 32,
- .rating = 300,
- .cpumask = CPU_MASK_CPU0,
- .irq = JMR3927_IRQ_TICK,
- .set_mode = jmr3927_set_mode,
-};
-
-static irqreturn_t jmr3927_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *cd = &jmr3927_clock_event_device;
-
- jmr3927_tmrptr->tisr = 0; /* ack interrupt */
-
- cd->event_handler(cd);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction jmr3927_timer_irqaction = {
- .handler = jmr3927_timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
- .name = "jmr3927-timer",
-};
-
void __init plat_time_init(void)
{
- struct clock_event_device *cd;
-
- clocksource_mips.read = jmr3927_hpt_read;
- mips_hpt_frequency = JMR3927_TIMER_CLK;
-
- jmr3927_tmrptr->cpra = JMR3927_TIMER_CLK / HZ;
- jmr3927_tmrptr->itmr = TXx927_TMTITMR_TIIE | TXx927_TMTITMR_TZCE;
- jmr3927_tmrptr->ccdr = JMR3927_TIMER_CCD;
- jmr3927_tmrptr->tcr =
- TXx927_TMTCR_TCE | TXx927_TMTCR_CCDE | TXx927_TMTCR_TMODE_ITVL;
-
- cd = &jmr3927_clock_event_device;
- /* Calculate the min / max delta */
- cd->mult = div_sc((unsigned long) JMR3927_IMCLK, NSEC_PER_SEC, 32);
- cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
- cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
- clockevents_register_device(cd);
-
- setup_irq(JMR3927_IRQ_TICK, &jmr3927_timer_irqaction);
+ txx9_clockevent_init(TX3927_TMR_REG(0),
+ TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
+ JMR3927_IMCLK);
+ txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
}
#define DO_WRITE_THROUGH
@@ -317,15 +255,8 @@
tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
/* TMR */
- /* disable all timers */
- for (i = 0; i < TX3927_NR_TMR; i++) {
- tx3927_tmrptr(i)->tcr = TXx927_TMTCR_CRE;
- tx3927_tmrptr(i)->tisr = 0;
- tx3927_tmrptr(i)->cpra = 0xffffffff;
- tx3927_tmrptr(i)->itmr = 0;
- tx3927_tmrptr(i)->ccdr = 0;
- tx3927_tmrptr(i)->pgmr = 0;
- }
+ for (i = 0; i < TX3927_NR_TMR; i++)
+ txx9_tmr_init(TX3927_TMR_REG(i));
/* DMA */
tx3927_dmaptr->mcr = 0;