rtl8xxxu: Add rtl8723bu_radioa_1t_init_table
Add 8723bu 1T radio init table. The vendor driver indicates that some
registers need special treatment for TFBGA90, TFBGA80, and TFBGA79
packaging. However the vendor driver never actually checks the package
type, so just stick to default values here.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index cc91247..7d62440 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -792,6 +792,75 @@
{0xff, 0xffffffff}
};
+static struct rtl8xxxu_rfregval rtl8723bu_radioa_1t_init_table[] = {
+ {0x00, 0x00010000}, {0xb0, 0x000dffe0},
+ {0xfe, 0x00000000}, {0xfe, 0x00000000},
+ {0xfe, 0x00000000}, {0xb1, 0x00000018},
+ {0xfe, 0x00000000}, {0xfe, 0x00000000},
+ {0xfe, 0x00000000}, {0xb2, 0x00084c00},
+ {0xb5, 0x0000d2cc}, {0xb6, 0x000925aa},
+ {0xb7, 0x00000010}, {0xb8, 0x0000907f},
+ {0x5c, 0x00000002}, {0x7c, 0x00000002},
+ {0x7e, 0x00000005}, {0x8b, 0x0006fc00},
+ {0xb0, 0x000ff9f0}, {0x1c, 0x000739d2},
+ {0x1e, 0x00000000}, {0xdf, 0x00000780},
+ {0x50, 0x00067435},
+ /*
+ * The 8723bu vendor driver indicates that bit 8 should be set in
+ * 0x51 for package types TFBGA90, TFBGA80, and TFBGA79. However
+ * they never actually check the package type - and just default
+ * to not setting it.
+ */
+ {0x51, 0x0006b04e},
+ {0x52, 0x000007d2}, {0x53, 0x00000000},
+ {0x54, 0x00050400}, {0x55, 0x0004026e},
+ {0xdd, 0x0000004c}, {0x70, 0x00067435},
+ /*
+ * 0x71 has same package type condition as for register 0x51
+ */
+ {0x71, 0x0006b04e},
+ {0x72, 0x000007d2}, {0x73, 0x00000000},
+ {0x74, 0x00050400}, {0x75, 0x0004026e},
+ {0xef, 0x00000100}, {0x34, 0x0000add7},
+ {0x35, 0x00005c00}, {0x34, 0x00009dd4},
+ {0x35, 0x00005000}, {0x34, 0x00008dd1},
+ {0x35, 0x00004400}, {0x34, 0x00007dce},
+ {0x35, 0x00003800}, {0x34, 0x00006cd1},
+ {0x35, 0x00004400}, {0x34, 0x00005cce},
+ {0x35, 0x00003800}, {0x34, 0x000048ce},
+ {0x35, 0x00004400}, {0x34, 0x000034ce},
+ {0x35, 0x00003800}, {0x34, 0x00002451},
+ {0x35, 0x00004400}, {0x34, 0x0000144e},
+ {0x35, 0x00003800}, {0x34, 0x00000051},
+ {0x35, 0x00004400}, {0xef, 0x00000000},
+ {0xef, 0x00000100}, {0xed, 0x00000010},
+ {0x44, 0x0000add7}, {0x44, 0x00009dd4},
+ {0x44, 0x00008dd1}, {0x44, 0x00007dce},
+ {0x44, 0x00006cc1}, {0x44, 0x00005cce},
+ {0x44, 0x000044d1}, {0x44, 0x000034ce},
+ {0x44, 0x00002451}, {0x44, 0x0000144e},
+ {0x44, 0x00000051}, {0xef, 0x00000000},
+ {0xed, 0x00000000}, {0x7f, 0x00020080},
+ {0xef, 0x00002000}, {0x3b, 0x000380ef},
+ {0x3b, 0x000302fe}, {0x3b, 0x00028ce6},
+ {0x3b, 0x000200bc}, {0x3b, 0x000188a5},
+ {0x3b, 0x00010fbc}, {0x3b, 0x00008f71},
+ {0x3b, 0x00000900}, {0xef, 0x00000000},
+ {0xed, 0x00000001}, {0x40, 0x000380ef},
+ {0x40, 0x000302fe}, {0x40, 0x00028ce6},
+ {0x40, 0x000200bc}, {0x40, 0x000188a5},
+ {0x40, 0x00010fbc}, {0x40, 0x00008f71},
+ {0x40, 0x00000900}, {0xed, 0x00000000},
+ {0x82, 0x00080000}, {0x83, 0x00008000},
+ {0x84, 0x00048d80}, {0x85, 0x00068000},
+ {0xa2, 0x00080000}, {0xa3, 0x00008000},
+ {0xa4, 0x00048d80}, {0xa5, 0x00068000},
+ {0xed, 0x00000002}, {0xef, 0x00000002},
+ {0x56, 0x00000032}, {0x76, 0x00000032},
+ {0x01, 0x00000780},
+ {0xff, 0xffffffff}
+};
+
static struct rtl8xxxu_rfregval rtl8192cu_radioa_2t_init_table[] = {
{0x00, 0x00030159}, {0x01, 0x00031284},
{0x02, 0x00098000}, {0x03, 0x00018c63},
@@ -1270,6 +1339,11 @@
return retval;
}
+/*
+ * The RTL8723BU driver indicates that registers 0xb2 and 0xb6 can
+ * have write issues in high temperature conditions. We may have to
+ * retry writing them.
+ */
static int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv,
enum rtl8xxxu_rfpath path, u8 reg, u32 data)
{
@@ -4562,6 +4636,10 @@
rftable = rtl8723au_radioa_1t_init_table;
ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
break;
+ case 0x8723b:
+ rftable = rtl8723bu_radioa_1t_init_table;
+ ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
+ break;
case 0x8188c:
if (priv->hi_pa)
rftable = rtl8188ru_radioa_1t_highpa_table;