ide: remove ata_status_t and atapi_status_t
Remove ata_status_t (unused) and atapi_status_t.
While at it:
* replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible)
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 53f9025..7b94c7a 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -788,12 +788,12 @@
static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- atapi_status_t status;
atapi_bcount_t bcount;
atapi_ireason_t ireason;
idefloppy_pc_t *pc = floppy->pc;
struct request *rq = pc->rq;
unsigned int temp;
+ u8 stat;
debug_log(KERN_INFO "ide-floppy: Reached %s interrupt handler\n",
__FUNCTION__);
@@ -809,16 +809,16 @@
}
/* Clear the interrupt */
- status.all = HWIF(drive)->INB(IDE_STATUS_REG);
+ stat = drive->hwif->INB(IDE_STATUS_REG);
- if (!status.b.drq) { /* No more interrupts */
+ if ((stat & DRQ_STAT) == 0) { /* No more interrupts */
debug_log(KERN_INFO "Packet command completed, %d bytes "
"transferred\n", pc->actually_transferred);
clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
local_irq_enable_in_hardirq();
- if (status.b.check || test_bit(PC_DMA_ERROR, &pc->flags)) {
+ if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
/* Error detected */
debug_log(KERN_INFO "ide-floppy: %s: I/O error\n",
drive->name);
@@ -1632,14 +1632,14 @@
/* Else assume format_unit has finished, and we're
** at 0x10000 */
} else {
- atapi_status_t status;
unsigned long flags;
+ u8 stat;
local_irq_save(flags);
- status.all = HWIF(drive)->INB(IDE_STATUS_REG);
+ stat = drive->hwif->INB(IDE_STATUS_REG);
local_irq_restore(flags);
- progress_indication = !status.b.dsc ? 0 : 0x10000;
+ progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000;
}
if (put_user(progress_indication, arg))
return (-EFAULT);
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 3bae2c4..dc7e539 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -562,27 +562,24 @@
static u8 ide_dump_atapi_status(ide_drive_t *drive, const char *msg, u8 stat)
{
unsigned long flags;
-
- atapi_status_t status;
atapi_error_t error;
- status.all = stat;
error.all = 0;
local_irq_save(flags);
printk("%s: %s: status=0x%02x { ", drive->name, msg, stat);
- if (status.b.bsy)
+ if (stat & BUSY_STAT)
printk("Busy ");
else {
- if (status.b.drdy) printk("DriveReady ");
- if (status.b.df) printk("DeviceFault ");
- if (status.b.dsc) printk("SeekComplete ");
- if (status.b.drq) printk("DataRequest ");
- if (status.b.corr) printk("CorrectedError ");
- if (status.b.idx) printk("Index ");
- if (status.b.check) printk("Error ");
+ if (stat & READY_STAT) printk("DriveReady ");
+ if (stat & WRERR_STAT) printk("DeviceFault ");
+ if (stat & SEEK_STAT) printk("SeekComplete ");
+ if (stat & DRQ_STAT) printk("DataRequest ");
+ if (stat & ECC_STAT) printk("CorrectedError ");
+ if (stat & INDEX_STAT) printk("Index ");
+ if (stat & ERR_STAT) printk("Error ");
}
printk("}\n");
- if (status.b.check && !status.b.bsy) {
+ if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) {
error.all = HWIF(drive)->INB(IDE_ERROR_REG);
printk("%s: %s: error=0x%02x { ", drive->name, msg, error.all);
if (error.b.ili) printk("IllegalLengthIndication ");
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 90e902d..c910395 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1848,15 +1848,14 @@
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- atapi_status_t status;
atapi_bcount_t bcount;
atapi_ireason_t ireason;
idetape_pc_t *pc = tape->pc;
-
unsigned int temp;
#if SIMULATE_ERRORS
static int error_sim_count = 0;
#endif
+ u8 stat;
#if IDETAPE_DEBUG_LOG
if (tape->debug_level >= 4)
@@ -1865,10 +1864,10 @@
#endif /* IDETAPE_DEBUG_LOG */
/* Clear the interrupt */
- status.all = HWIF(drive)->INB(IDE_STATUS_REG);
+ stat = hwif->INB(IDE_STATUS_REG);
if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
- if (HWIF(drive)->ide_dma_end(drive) || status.b.check) {
+ if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) {
/*
* A DMA error is sometimes expected. For example,
* if the tape is crossing a filemark during a
@@ -1902,7 +1901,7 @@
}
/* No more interrupts */
- if (!status.b.drq) {
+ if ((stat & DRQ_STAT) == 0) {
#if IDETAPE_DEBUG_LOG
if (tape->debug_level >= 2)
printk(KERN_INFO "ide-tape: Packet command completed, %d bytes transferred\n", pc->actually_transferred);
@@ -1917,12 +1916,13 @@
(++error_sim_count % 100) == 0) {
printk(KERN_INFO "ide-tape: %s: simulating error\n",
tape->name);
- status.b.check = 1;
+ stat |= ERR_STAT;
}
#endif
- if (status.b.check && pc->c[0] == IDETAPE_REQUEST_SENSE_CMD)
- status.b.check = 0;
- if (status.b.check || test_bit(PC_DMA_ERROR, &pc->flags)) { /* Error detected */
+ if ((stat & ERR_STAT) && pc->c[0] == IDETAPE_REQUEST_SENSE_CMD)
+ stat &= ~ERR_STAT;
+ if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
+ /* Error detected */
#if IDETAPE_DEBUG_LOG
if (tape->debug_level >= 1)
printk(KERN_INFO "ide-tape: %s: I/O error\n",
@@ -1941,7 +1941,7 @@
}
pc->error = 0;
if (test_bit(PC_WAIT_FOR_DSC, &pc->flags) &&
- !status.b.dsc) {
+ (stat & SEEK_STAT) == 0) {
/* Media access command */
tape->dsc_polling_start = jiffies;
tape->dsc_polling_frequency = IDETAPE_DSC_MA_FAST;
@@ -2285,11 +2285,11 @@
{
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t *pc = tape->pc;
- atapi_status_t status;
+ u8 stat;
- status.all = HWIF(drive)->INB(IDE_STATUS_REG);
- if (status.b.dsc) {
- if (status.b.check) {
+ stat = drive->hwif->INB(IDE_STATUS_REG);
+ if (stat & SEEK_STAT) {
+ if (stat & ERR_STAT) {
/* Error detected */
if (pc->c[0] != IDETAPE_TEST_UNIT_READY_CMD)
printk(KERN_ERR "ide-tape: %s: I/O error, ",
@@ -2407,7 +2407,7 @@
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t *pc = NULL;
struct request *postponed_rq = tape->postponed_rq;
- atapi_status_t status;
+ u8 stat;
#if IDETAPE_DEBUG_LOG
#if 0
@@ -2455,7 +2455,7 @@
* If the tape is still busy, postpone our request and service
* the other device meanwhile.
*/
- status.all = HWIF(drive)->INB(IDE_STATUS_REG);
+ stat = drive->hwif->INB(IDE_STATUS_REG);
if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2))
set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
@@ -2471,7 +2471,7 @@
tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time);
calculate_speeds(drive);
if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) &&
- !status.b.dsc) {
+ (stat & SEEK_STAT) == 0) {
if (postponed_rq == NULL) {
tape->dsc_polling_start = jiffies;
tape->dsc_polling_frequency = tape->best_dsc_rw_frequency;
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 9706de9..bd2b569 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -398,11 +398,10 @@
idescsi_pc_t *pc=scsi->pc;
struct request *rq = pc->rq;
atapi_bcount_t bcount;
- atapi_status_t status;
atapi_ireason_t ireason;
atapi_feature_t feature;
-
unsigned int temp;
+ u8 stat;
#if IDESCSI_DEBUG_LOG
printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n");
@@ -427,14 +426,14 @@
feature.all = 0;
/* Clear the interrupt */
- status.all = HWIF(drive)->INB(IDE_STATUS_REG);
+ stat = drive->hwif->INB(IDE_STATUS_REG);
- if (!status.b.drq) {
+ if ((stat & DRQ_STAT) == 0) {
/* No more interrupts */
if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
printk (KERN_INFO "Packet command completed, %d bytes transferred\n", pc->actually_transferred);
local_irq_enable_in_hardirq();
- if (status.b.check)
+ if (stat & ERR_STAT)
rq->errors++;
idescsi_end_request (drive, 1, 0);
return ide_stopped;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index c6ffc20..921cf71 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -366,50 +366,6 @@
} select_t, ata_select_t;
/*
- * The ATA-IDE Status Register.
- * The ATAPI Status Register.
- *
- * check : Error occurred
- * idx : Index Error
- * corr : Correctable error occurred
- * drq : Data is request by the device
- * dsc : Disk Seek Complete : ata
- * : Media access command finished : atapi
- * df : Device Fault : ata
- * : Reserved : atapi
- * drdy : Ready, Command Mode Capable : ata
- * : Ignored for ATAPI commands : atapi
- * bsy : Disk is Busy
- * : The device has access to the command block
- */
-typedef union {
- unsigned all :8;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned check :1;
- unsigned idx :1;
- unsigned corr :1;
- unsigned drq :1;
- unsigned dsc :1;
- unsigned df :1;
- unsigned drdy :1;
- unsigned bsy :1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned bsy :1;
- unsigned drdy :1;
- unsigned df :1;
- unsigned dsc :1;
- unsigned drq :1;
- unsigned corr :1;
- unsigned idx :1;
- unsigned check :1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- } b;
-} ata_status_t, atapi_status_t;
-
-/*
* ATAPI Feature Register
*
* dma : Using DMA or PIO