ASoC: Support Speyside build variants with WM8962 fitted
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
diff --git a/sound/soc/samsung/speyside_wm8962.c b/sound/soc/samsung/speyside_wm8962.c
new file mode 100644
index 0000000..c0ba0bf
--- /dev/null
+++ b/sound/soc/samsung/speyside_wm8962.c
@@ -0,0 +1,260 @@
+/*
+ * Speyside with WM8962 audio support
+ *
+ * Copyright 2011 Wolfson Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+#include <linux/gpio.h>
+
+#include "../codecs/wm8962.h"
+
+static int speyside_wm8962_set_bias_level(struct snd_soc_card *card,
+ struct snd_soc_dapm_context *dapm,
+ enum snd_soc_bias_level level)
+{
+ struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
+ int ret;
+
+ switch (level) {
+ case SND_SOC_BIAS_PREPARE:
+ if (dapm->bias_level == SND_SOC_BIAS_STANDBY) {
+ ret = snd_soc_dai_set_pll(codec_dai, WM8962_FLL,
+ WM8962_FLL_MCLK, 32768,
+ 44100 * 256);
+ if (ret < 0)
+ pr_err("Failed to start FLL\n");
+
+ ret = snd_soc_dai_set_sysclk(codec_dai,
+ WM8962_SYSCLK_FLL,
+ 44100 * 256,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int speyside_wm8962_set_bias_level_post(struct snd_soc_card *card,
+ struct snd_soc_dapm_context *dapm,
+ enum snd_soc_bias_level level)
+{
+ struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
+ int ret;
+
+ switch (level) {
+ case SND_SOC_BIAS_STANDBY:
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8962_SYSCLK_MCLK,
+ 32768, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_pll(codec_dai, WM8962_FLL,
+ 0, 0, 0);
+ if (ret < 0) {
+ pr_err("Failed to stop FLL\n");
+ return ret;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ dapm->bias_level = level;
+
+ return 0;
+}
+
+static int speyside_wm8962_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ int ret;
+
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+ | SND_SOC_DAIFMT_NB_NF
+ | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S
+ | SND_SOC_DAIFMT_NB_NF
+ | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_ops speyside_wm8962_ops = {
+ .hw_params = speyside_wm8962_hw_params,
+};
+
+static struct snd_soc_dai_link speyside_wm8962_dai[] = {
+ {
+ .name = "CPU",
+ .stream_name = "CPU",
+ .cpu_dai_name = "samsung-i2s.0",
+ .codec_dai_name = "wm8962",
+ .platform_name = "samsung-audio",
+ .codec_name = "wm8962.1-001a",
+ .ops = &speyside_wm8962_ops,
+ },
+};
+
+static const struct snd_kcontrol_new controls[] = {
+ SOC_DAPM_PIN_SWITCH("Main Speaker"),
+};
+
+static struct snd_soc_dapm_widget widgets[] = {
+ SND_SOC_DAPM_HP("Headphone", NULL),
+ SND_SOC_DAPM_MIC("Headset Mic", NULL),
+
+ SND_SOC_DAPM_MIC("DMIC", NULL),
+
+ SND_SOC_DAPM_SPK("Main Speaker", NULL),
+};
+
+static struct snd_soc_dapm_route audio_paths[] = {
+ { "Headphone", NULL, "HPOUTL" },
+ { "Headphone", NULL, "HPOUTR" },
+
+ { "Main Speaker", NULL, "SPKOUTL" },
+ { "Main Speaker", NULL, "SPKOUTR" },
+
+ { "MICBIAS", NULL, "Headset Mic" },
+ { "IN4L", NULL, "MICBIAS" },
+ { "IN4R", NULL, "MICBIAS" },
+
+ { "MICBIAS", NULL, "DMIC" },
+ { "DMICDAT", NULL, "MICBIAS" },
+};
+
+static struct snd_soc_jack speyside_wm8962_headset;
+
+/* Headset jack detection DAPM pins */
+static struct snd_soc_jack_pin speyside_wm8962_headset_pins[] = {
+ {
+ .pin = "Headset Mic",
+ .mask = SND_JACK_MICROPHONE,
+ },
+ {
+ .pin = "Headphone",
+ .mask = SND_JACK_MICROPHONE,
+ },
+};
+
+static int speyside_wm8962_late_probe(struct snd_soc_card *card)
+{
+ struct snd_soc_codec *codec = card->rtd[0].codec;
+ struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
+ int ret;
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8962_SYSCLK_MCLK,
+ 32768, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_jack_new(codec, "Headset",
+ SND_JACK_HEADSET | SND_JACK_BTN_0,
+ &speyside_wm8962_headset);
+ if (ret)
+ return ret;
+
+ ret = snd_soc_jack_add_pins(&speyside_wm8962_headset,
+ ARRAY_SIZE(speyside_wm8962_headset_pins),
+ speyside_wm8962_headset_pins);
+ if (ret)
+ return ret;
+
+ wm8962_mic_detect(codec, &speyside_wm8962_headset);
+
+ return 0;
+}
+
+static struct snd_soc_card speyside_wm8962 = {
+ .name = "Speyside WM8962",
+ .dai_link = speyside_wm8962_dai,
+ .num_links = ARRAY_SIZE(speyside_wm8962_dai),
+
+ .set_bias_level = speyside_wm8962_set_bias_level,
+ .set_bias_level_post = speyside_wm8962_set_bias_level_post,
+
+ .controls = controls,
+ .num_controls = ARRAY_SIZE(controls),
+ .dapm_widgets = widgets,
+ .num_dapm_widgets = ARRAY_SIZE(widgets),
+ .dapm_routes = audio_paths,
+ .num_dapm_routes = ARRAY_SIZE(audio_paths),
+
+ .late_probe = speyside_wm8962_late_probe,
+};
+
+static __devinit int speyside_wm8962_probe(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = &speyside_wm8962;
+ int ret;
+
+ card->dev = &pdev->dev;
+
+ ret = snd_soc_register_card(card);
+ if (ret) {
+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devexit speyside_wm8962_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_card(card);
+
+ return 0;
+}
+
+static struct platform_driver speyside_wm8962_driver = {
+ .driver = {
+ .name = "speyside-wm8962",
+ .owner = THIS_MODULE,
+ .pm = &snd_soc_pm_ops,
+ },
+ .probe = speyside_wm8962_probe,
+ .remove = __devexit_p(speyside_wm8962_remove),
+};
+
+static int __init speyside_wm8962_audio_init(void)
+{
+ return platform_driver_register(&speyside_wm8962_driver);
+}
+module_init(speyside_wm8962_audio_init);
+
+static void __exit speyside_wm8962_audio_exit(void)
+{
+ platform_driver_unregister(&speyside_wm8962_driver);
+}
+module_exit(speyside_wm8962_audio_exit);
+
+MODULE_DESCRIPTION("Speyside WM8962 audio support");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:speyside-wm8962");