Merge android-4.9.197(e9766ef) into msm-4.9
* refs/heads/tmp-e9766ef:
Linux 4.9.197
xfs: clear sb->s_fs_info on mount failure
x86/asm: Fix MWAITX C-state hint value
tracing: Get trace_array reference for available_tracers files
tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency
tracing/hwlat: Report total time spent in all NMIs during the sample
media: stkwebcam: fix runtime PM after driver unbind
Fix the locking in dcache_readdir() and friends
MIPS: Disable Loongson MMI instructions for kernel build
Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc
staging: fbtft: Stop using BL_CORE_DRIVER1
kernel/sysctl.c: do not override max_threads provided by userspace
CIFS: Force reval dentry if LOOKUP_REVAL flag is set
CIFS: Force revalidate inode when dentry is stale
CIFS: Gracefully handle QueryInfo errors during open
perf inject jit: Fix JIT_CODE_MOVE filename
perf llvm: Don't access out-of-scope array
efivar/ssdt: Don't iterate over EFI vars if no SSDT override was specified
iio: light: opt3001: fix mutex unlock race
iio: adc: ad799x: fix probe error handling
staging: vt6655: Fix memory leak in vt6655_probe
USB: legousbtower: fix use-after-free on release
USB: legousbtower: fix open after failed reset request
USB: legousbtower: fix potential NULL-deref on disconnect
USB: legousbtower: fix deadlock on disconnect
USB: legousbtower: fix slab info leak at probe
usb: renesas_usbhs: gadget: Fix usb_ep_set_{halt,wedge}() behavior
usb: renesas_usbhs: gadget: Do not discard queues in usb_ep_set_{halt,wedge}()
USB: dummy-hcd: fix power budget for SuperSpeed mode
USB: microtek: fix info-leak at probe
USB: usblcd: fix I/O after disconnect
USB: serial: fix runtime PM after driver unbind
USB: serial: option: add support for Cinterion CLS8 devices
USB: serial: option: add Telit FN980 compositions
USB: serial: ftdi_sio: add device IDs for Sienna and Echelon PL-20
USB: serial: keyspan: fix NULL-derefs on open() and write()
serial: uartlite: fix exit path null pointer
USB: ldusb: fix NULL-derefs on driver unbind
USB: chaoskey: fix use-after-free on release
USB: usblp: fix runtime PM after driver unbind
USB: iowarrior: fix use-after-free after driver unbind
USB: iowarrior: fix use-after-free on release
USB: iowarrior: fix use-after-free on disconnect
USB: adutux: fix use-after-free on release
USB: adutux: fix NULL-derefs on disconnect
USB: adutux: fix use-after-free on disconnect
USB: adutux: remove redundant variable minor
xhci: Increase STS_SAVE timeout in xhci_suspend()
usb: xhci: wait for CNR controller not ready bit in xhci resume
xhci: Check all endpoints for LPM timeout
xhci: Prevent device initiated U1/U2 link pm if exit latency is too long
xhci: Fix false warning message about wrong bounce buffer write length
USB: usb-skeleton: fix NULL-deref on disconnect
USB: usb-skeleton: fix runtime PM after driver unbind
USB: yurex: fix NULL-derefs on disconnect
USB: yurex: Don't retry on unexpected errors
USB: rio500: Remove Rio 500 kernel driver
panic: ensure preemption is disabled during panic()
ASoC: sgtl5000: Improve VAG power and mute control
nl80211: validate beacon head
cfg80211: Use const more consistently in for_each_element macros
cfg80211: add and use strongly typed element iteration macros
coresight: etm4x: Use explicit barriers on enable/disable
crypto: caam - fix concurrency issue in givencrypt descriptor
perf stat: Reset previous counts on repeat with interval
perf stat: Fix a segmentation fault when using repeat forever
perf tools: Fix segfault in cpu_cache_level__read()
tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure
kernel/elfcore.c: include proper prototypes
sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr()
fuse: fix memleak in cuse_channel_open
thermal: Fix use-after-free when unregistering thermal zone device
drm/amdgpu: Check for valid number of registers to read
ceph: reconnect connection if session hang in opening state
ceph: fix directories inode i_blkbits initialization
xen/pci: reserve MCFG areas earlier
9p: avoid attaching writeback_fid on mmap with type PRIVATE
fs: nfs: Fix possible null-pointer dereferences in encode_attrs()
ima: always return negative code for error
cfg80211: initialize on-stack chandefs
ieee802154: atusb: fix use-after-free at disconnect
watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeout
timer: Read jiffies once when forwarding base clk
usercopy: Avoid HIGHMEM pfn warning
crypto: qat - Silence smp_processor_id() warning
can: mcp251x: mcp251x_hw_reset(): allow more time after a reset
powerpc/powernv: Restrict OPAL symbol map to only be readable by root
ASoC: Define a set of DAPM pre/post-up events
KVM: nVMX: handle page fault in vmread fix
s390/cio: exclude subchannels with no parent from pseudo check
s390/cio: avoid calling strlen on null pointer
s390/topology: avoid firing events before kobjs are created
KVM: s390: Test for bad access register and size at the start of S390_MEM_OP
ANDROID: cuttlefish_defconfig: Enable BPF_JIT and BPF_JIT_ALWAYS_ON
Conflicts:
kernel/sched/core.c
Change-Id: I7ee939936455a1664cfacc860e3ac229171cf1e3
Signed-off-by: jianzhou <jianzhou@codeaurora.org>
diff --git a/Documentation/usb/rio.txt b/Documentation/usb/rio.txt
deleted file mode 100644
index aee715a..0000000
--- a/Documentation/usb/rio.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-Copyright (C) 1999, 2000 Bruce Tenison
-Portions Copyright (C) 1999, 2000 David Nelson
-Thanks to David Nelson for guidance and the usage of the scanner.txt
-and scanner.c files to model our driver and this informative file.
-
-Mar. 2, 2000
-
-CHANGES
-
-- Initial Revision
-
-
-OVERVIEW
-
-This README will address issues regarding how to configure the kernel
-to access a RIO 500 mp3 player.
-Before I explain how to use this to access the Rio500 please be warned:
-
-W A R N I N G:
---------------
-
-Please note that this software is still under development. The authors
-are in no way responsible for any damage that may occur, no matter how
-inconsequential.
-
-It seems that the Rio has a problem when sending .mp3 with low batteries.
-I suggest when the batteries are low and you want to transfer stuff that you
-replace it with a fresh one. In my case, what happened is I lost two 16kb
-blocks (they are no longer usable to store information to it). But I don't
-know if that's normal or not; it could simply be a problem with the flash
-memory.
-
-In an extreme case, I left my Rio playing overnight and the batteries wore
-down to nothing and appear to have corrupted the flash memory. My RIO
-needed to be replaced as a result. Diamond tech support is aware of the
-problem. Do NOT allow your batteries to wear down to nothing before
-changing them. It appears RIO 500 firmware does not handle low battery
-power well at all.
-
-On systems with OHCI controllers, the kernel OHCI code appears to have
-power on problems with some chipsets. If you are having problems
-connecting to your RIO 500, try turning it on first and then plugging it
-into the USB cable.
-
-Contact information:
---------------------
-
- The main page for the project is hosted at sourceforge.net in the following
- URL: <http://rio500.sourceforge.net>. You can also go to the project's
- sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
- There is also a mailing list: rio500-users@lists.sourceforge.net
-
-Authors:
--------
-
-Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith
-Clayton <kclayton@jps.net> is incharge of the PPC port and making sure
-things work there. Bruce Tenison <btenison@dibbs.net> is adding support
-for .fon files and also does testing. The program will mostly sure be
-re-written and Pete Ikusz along with the rest will re-design it. I would
-also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use
-with some important information regarding the communication with the Rio.
-
-ADDITIONAL INFORMATION and Userspace tools
-
-http://rio500.sourceforge.net/
-
-
-REQUIREMENTS
-
-A host with a USB port. Ideally, either a UHCI (Intel) or OHCI
-(Compaq and others) hardware port should work.
-
-A Linux development kernel (2.3.x) with USB support enabled or a
-backported version to linux-2.2.x. See http://www.linux-usb.org for
-more information on accomplishing this.
-
-A Linux kernel with RIO 500 support enabled.
-
-'lspci' which is only needed to determine the type of USB hardware
-available in your machine.
-
-CONFIGURATION
-
-Using `lspci -v`, determine the type of USB hardware available.
-
- If you see something like:
-
- USB Controller: ......
- Flags: .....
- I/O ports at ....
-
- Then you have a UHCI based controller.
-
- If you see something like:
-
- USB Controller: .....
- Flags: ....
- Memory at .....
-
- Then you have a OHCI based controller.
-
-Using `make menuconfig` or your preferred method for configuring the
-kernel, select 'Support for USB', 'OHCI/UHCI' depending on your
-hardware (determined from the steps above), 'USB Diamond Rio500 support', and
-'Preliminary USB device filesystem'. Compile and install the modules
-(you may need to execute `depmod -a` to update the module
-dependencies).
-
-Add a device for the USB rio500:
- `mknod /dev/usb/rio500 c 180 64`
-
-Set appropriate permissions for /dev/usb/rio500 (don't forget about
-group and world permissions). Both read and write permissions are
-required for proper operation.
-
-Load the appropriate modules (if compiled as modules):
-
- OHCI:
- modprobe usbcore
- modprobe usb-ohci
- modprobe rio500
-
- UHCI:
- modprobe usbcore
- modprobe usb-uhci (or uhci)
- modprobe rio500
-
-That's it. The Rio500 Utils at: http://rio500.sourceforge.net should
-be able to access the rio500.
-
-BUGS
-
-If you encounter any problems feel free to drop me an email.
-
-Bruce Tenison
-btenison@dibbs.net
-
diff --git a/MAINTAINERS b/MAINTAINERS
index 5ea427b..01e7290 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12486,13 +12486,6 @@
S: Maintained
F: drivers/net/usb/dm9601.c
-USB DIAMOND RIO500 DRIVER
-M: Cesar Miquel <miquel@df.uba.ar>
-L: rio500-users@lists.sourceforge.net
-W: http://rio500.sourceforge.net
-S: Maintained
-F: drivers/usb/misc/rio500*
-
USB EHCI DRIVER
M: Alan Stern <stern@rowland.harvard.edu>
L: linux-usb@vger.kernel.org
diff --git a/Makefile b/Makefile
index 8571fcf..e6bf826 100755
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 4
PATCHLEVEL = 9
-SUBLEVEL = 196
+SUBLEVEL = 197
EXTRAVERSION =
NAME = Roaring Lionus
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index d590098..067d73e 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -97,7 +97,6 @@
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
CONFIG_MSDOS_FS=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index c1470a0..031d9d3 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -207,7 +207,6 @@
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index a016ecc..178ee84 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -591,7 +591,6 @@
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 60d3fec..dc873d2 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -354,7 +354,6 @@
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index a1ede19..7d9aa28 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -202,7 +202,6 @@
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
diff --git a/arch/arm64/configs/cuttlefish_defconfig b/arch/arm64/configs/cuttlefish_defconfig
index 3c1e253..1abff0f 100644
--- a/arch/arm64/configs/cuttlefish_defconfig
+++ b/arch/arm64/configs/cuttlefish_defconfig
@@ -31,6 +31,7 @@
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_BPF_SYSCALL=y
+CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_EMBEDDED=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
@@ -190,6 +191,7 @@
CONFIG_NET_CLS_ACT=y
CONFIG_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS=y
+CONFIG_BPF_JIT=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_DEFAULT_PS is not set
CONFIG_MAC80211=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index f3f6005..fb5651b 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -637,7 +637,6 @@
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
-CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index c2b4e3f..4f6b45f 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -350,7 +350,6 @@
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform
index 0fce460..12abf14 100644
--- a/arch/mips/loongson64/Platform
+++ b/arch/mips/loongson64/Platform
@@ -43,6 +43,10 @@
$(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64)
endif
+# Some -march= flags enable MMI instructions, and GCC complains about that
+# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
+cflags-y += $(call cc-option,-mno-loongson-mmi)
+
#
# Loongson Machines' Support
#
diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile
index 247ca2e..adfaee2 100644
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -8,6 +8,7 @@
$(filter -mmicromips,$(KBUILD_CFLAGS)) \
$(filter -march=%,$(KBUILD_CFLAGS)) \
$(filter -m%-float,$(KBUILD_CFLAGS)) \
+ $(filter -mno-loongson-%,$(KBUILD_CFLAGS)) \
-D__VDSO__
cflags-vdso := $(ccflags-vdso) \
$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 7fb61eb..c34a44e 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -579,7 +579,10 @@
bin_attr->size);
}
-static BIN_ATTR_RO(symbol_map, 0);
+static struct bin_attribute symbol_map_attr = {
+ .attr = {.name = "symbol_map", .mode = 0400},
+ .read = symbol_map_read
+};
static void opal_export_symmap(void)
{
@@ -596,10 +599,10 @@
return;
/* Setup attributes */
- bin_attr_symbol_map.private = __va(be64_to_cpu(syms[0]));
- bin_attr_symbol_map.size = be64_to_cpu(syms[1]);
+ symbol_map_attr.private = __va(be64_to_cpu(syms[0]));
+ symbol_map_attr.size = be64_to_cpu(syms[1]);
- rc = sysfs_create_bin_file(opal_kobj, &bin_attr_symbol_map);
+ rc = sysfs_create_bin_file(opal_kobj, &symbol_map_attr);
if (rc)
pr_warn("Error %d creating OPAL symbols file\n", rc);
}
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 239f295..69ac472 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -256,7 +256,8 @@
topology_update_polarization_simple();
for_each_online_cpu(cpu) {
dev = get_cpu_device(cpu);
- kobject_uevent(&dev->kobj, KOBJ_CHANGE);
+ if (dev)
+ kobject_uevent(&dev->kobj, KOBJ_CHANGE);
}
return rc;
}
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index ea20b60..3dc96b4 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -3033,7 +3033,7 @@
const u64 supported_flags = KVM_S390_MEMOP_F_INJECT_EXCEPTION
| KVM_S390_MEMOP_F_CHECK_ONLY;
- if (mop->flags & ~supported_flags)
+ if (mop->flags & ~supported_flags || mop->ar >= NUM_ACRS || !mop->size)
return -EINVAL;
if (mop->size > MEM_OP_MAX_SIZE)
diff --git a/arch/x86/configs/x86_64_cuttlefish_defconfig b/arch/x86/configs/x86_64_cuttlefish_defconfig
index 054c533..5d66b40 100644
--- a/arch/x86/configs/x86_64_cuttlefish_defconfig
+++ b/arch/x86/configs/x86_64_cuttlefish_defconfig
@@ -30,6 +30,7 @@
CONFIG_KALLSYMS_ALL=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BPF_SYSCALL=y
+CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_EMBEDDED=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
@@ -211,6 +212,7 @@
CONFIG_NET_CLS_ACT=y
CONFIG_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS=y
+CONFIG_BPF_JIT=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_RFKILL=y
diff --git a/arch/x86/include/asm/mwait.h b/arch/x86/include/asm/mwait.h
index 0b40cc4..58b1b76 100644
--- a/arch/x86/include/asm/mwait.h
+++ b/arch/x86/include/asm/mwait.h
@@ -19,7 +19,7 @@
#define MWAIT_ECX_INTERRUPT_BREAK 0x1
#define MWAITX_ECX_TIMER_ENABLE BIT(1)
#define MWAITX_MAX_LOOPS ((u32)-1)
-#define MWAITX_DISABLE_CSTATES 0xf
+#define MWAITX_DISABLE_CSTATES 0xf0
static inline void __monitor(const void *eax, unsigned long ecx,
unsigned long edx)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ce9a0d7..872665d 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -7668,7 +7668,7 @@
/* _system ok, as nested_vmx_check_permission verified cpl=0 */
if (kvm_write_guest_virt_system(vcpu, gva, &field_value,
(is_long_mode(vcpu) ? 8 : 4),
- NULL))
+ &e))
kvm_inject_page_fault(vcpu, &e);
}
diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index 9758524..71a3759 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -112,8 +112,8 @@
__monitorx(raw_cpu_ptr(&cpu_tss), 0, 0);
/*
- * AMD, like Intel, supports the EAX hint and EAX=0xf
- * means, do not enter any deep C-state and we use it
+ * AMD, like Intel's MWAIT version, supports the EAX hint and
+ * EAX=0xf0 means, do not enter any deep C-state and we use it
* here in delay() to minimize wakeup latency.
*/
__mwaitx(MWAITX_DISABLE_CSTATES, delay, MWAITX_ECX_TIMER_ENABLE);
diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c
index f8ac768..413e1f3 100644
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -75,7 +75,7 @@
#define DESC_AEAD_BASE (4 * CAAM_CMD_SZ)
#define DESC_AEAD_ENC_LEN (DESC_AEAD_BASE + 11 * CAAM_CMD_SZ)
#define DESC_AEAD_DEC_LEN (DESC_AEAD_BASE + 15 * CAAM_CMD_SZ)
-#define DESC_AEAD_GIVENC_LEN (DESC_AEAD_ENC_LEN + 9 * CAAM_CMD_SZ)
+#define DESC_AEAD_GIVENC_LEN (DESC_AEAD_ENC_LEN + 10 * CAAM_CMD_SZ)
/* Note: Nonce is counted in enckeylen */
#define DESC_AEAD_CTR_RFC3686_LEN (4 * CAAM_CMD_SZ)
@@ -474,6 +474,7 @@
u32 geniv, moveiv;
u32 ctx1_iv_off = 0;
u32 *desc;
+ u32 *wait_cmd;
const bool ctr_mode = ((ctx->class1_alg_type & OP_ALG_AAI_MASK) ==
OP_ALG_AAI_CTR_MOD128);
const bool is_rfc3686 = alg->caam.rfc3686;
@@ -736,6 +737,14 @@
/* Will read cryptlen */
append_math_add(desc, VARSEQINLEN, SEQINLEN, REG0, CAAM_CMD_SZ);
+
+ /*
+ * Wait for IV transfer (ofifo -> class2) to finish before starting
+ * ciphertext transfer (ofifo -> external memory).
+ */
+ wait_cmd = append_jump(desc, JUMP_JSL | JUMP_TEST_ALL | JUMP_COND_NIFP);
+ set_jump_tgt_here(desc, wait_cmd);
+
append_seq_fifo_load(desc, 0, FIFOLD_CLASS_BOTH | KEY_VLF |
FIFOLD_TYPE_MSG1OUT2 | FIFOLD_TYPE_LASTBOTH);
append_seq_fifo_store(desc, 0, FIFOST_TYPE_MESSAGE_DATA | KEY_VLF);
diff --git a/drivers/crypto/qat/qat_common/adf_common_drv.h b/drivers/crypto/qat/qat_common/adf_common_drv.h
index 980e074..0d596a9 100644
--- a/drivers/crypto/qat/qat_common/adf_common_drv.h
+++ b/drivers/crypto/qat/qat_common/adf_common_drv.h
@@ -95,7 +95,7 @@
static inline int get_current_node(void)
{
- return topology_physical_package_id(smp_processor_id());
+ return topology_physical_package_id(raw_smp_processor_id());
}
int adf_service_register(struct service_hndl *service);
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index 2f47c5b..d89457d 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -243,6 +243,9 @@
void *data;
int ret;
+ if (!efivar_ssdt[0])
+ return 0;
+
ret = efivar_init(efivar_ssdt_iter, &entries, true, &entries);
list_for_each_entry_safe(entry, aux, &entries, list) {
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
index 3938fca..24941a7 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
@@ -430,6 +430,9 @@
if (sh_num == AMDGPU_INFO_MMR_SH_INDEX_MASK)
sh_num = 0xffffffff;
+ if (info->read_mmr_reg.count > 128)
+ return -EINVAL;
+
regs = kmalloc_array(info->read_mmr_reg.count, sizeof(*regs), GFP_KERNEL);
if (!regs)
return -ENOMEM;
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 95d13a9..5f4ac5e 100755
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -184,6 +184,12 @@
if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 0))
dev_err(drvdata->dev,
"timeout while waiting for Idle Trace Status\n");
+ /*
+ * As recommended by section 4.3.7 ("Synchronization when using the
+ * memory-mapped interface") of ARM IHI 0064D
+ */
+ dsb(sy);
+ isb();
CS_LOCK(drvdata->base);
@@ -328,8 +334,12 @@
/* EN, bit[0] Trace unit enable bit */
control &= ~0x1;
- /* make sure everything completes before disabling */
- mb();
+ /*
+ * Make sure everything completes before disabling, as recommended
+ * by section 7.3.77 ("TRCVICTLR, ViewInst Main Control Register,
+ * SSTATUS") of ARM IHI 0064D
+ */
+ dsb(sy);
isb();
writel_relaxed(control, drvdata->base + TRCPRGCTLR);
diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
index 9704090..cd6dbe9 100644
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -817,10 +817,10 @@
ret = ad799x_write_config(st, st->chip_config->default_config);
if (ret < 0)
- goto error_disable_reg;
+ goto error_disable_vref;
ret = ad799x_read_config(st);
if (ret < 0)
- goto error_disable_reg;
+ goto error_disable_vref;
st->config = ret;
ret = iio_triggered_buffer_setup(indio_dev, NULL,
diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index 78c9b3a..be55477 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -695,6 +695,7 @@
struct iio_dev *iio = _iio;
struct opt3001 *opt = iio_priv(iio);
int ret;
+ bool wake_result_ready_queue = false;
if (!opt->ok_to_ignore_lock)
mutex_lock(&opt->lock);
@@ -729,13 +730,16 @@
}
opt->result = ret;
opt->result_ready = true;
- wake_up(&opt->result_ready_queue);
+ wake_result_ready_queue = true;
}
out:
if (!opt->ok_to_ignore_lock)
mutex_unlock(&opt->lock);
+ if (wake_result_ready_queue)
+ wake_up(&opt->result_ready_queue);
+
return IRQ_HANDLED;
}
diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c
index 1c48f2f..7297fd2 100644
--- a/drivers/media/usb/stkwebcam/stk-webcam.c
+++ b/drivers/media/usb/stkwebcam/stk-webcam.c
@@ -647,8 +647,7 @@
dev->owner = NULL;
}
- if (is_present(dev))
- usb_autopm_put_interface(dev->interface);
+ usb_autopm_put_interface(dev->interface);
mutex_unlock(&dev->lock);
return v4l2_fh_release(fp);
}
diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index d8c448b..ec0b3d0 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -627,7 +627,7 @@
static int mcp251x_hw_reset(struct spi_device *spi)
{
struct mcp251x_priv *priv = spi_get_drvdata(spi);
- u8 reg;
+ unsigned long timeout;
int ret;
/* Wait for oscillator startup timer after power up */
@@ -641,10 +641,19 @@
/* Wait for oscillator startup timer after reset */
mdelay(MCP251X_OST_DELAY_MS);
- reg = mcp251x_read_reg(spi, CANSTAT);
- if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
- return -ENODEV;
+ /* Wait for reset to finish */
+ timeout = jiffies + HZ;
+ while ((mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK) !=
+ CANCTRL_REQOP_CONF) {
+ usleep_range(MCP251X_OST_DELAY_MS * 1000,
+ MCP251X_OST_DELAY_MS * 1000 * 2);
+ if (time_after(jiffies, timeout)) {
+ dev_err(&spi->dev,
+ "MCP251x didn't enter in conf mode after reset\n");
+ return -EBUSY;
+ }
+ }
return 0;
}
diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
index f186e04..12df6cf 100644
--- a/drivers/net/ieee802154/atusb.c
+++ b/drivers/net/ieee802154/atusb.c
@@ -838,10 +838,11 @@
ieee802154_unregister_hw(atusb->hw);
+ usb_put_dev(atusb->usb_dev);
+
ieee802154_free_hw(atusb->hw);
usb_set_intfdata(interface, NULL);
- usb_put_dev(atusb->usb_dev);
pr_debug("atusb_disconnect done\n");
}
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index e443b0d..0d59c12 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -369,7 +369,7 @@
goto error;
}
/* Check for trailing stuff. */
- if (i == num_devices && strlen(buf) > 0) {
+ if (i == num_devices && buf && strlen(buf) > 0) {
rc = -EINVAL;
goto error;
}
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 3d2b20e..39a2b0c 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -1120,6 +1120,8 @@
int sch_is_pseudo_sch(struct subchannel *sch)
{
+ if (!sch->dev.parent)
+ return 0;
return sch == to_css(sch->dev.parent)->pseudo_subchannel;
}
diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index 587f68a..d9ba8c0 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -247,7 +247,7 @@
static int fbtft_backlight_update_status(struct backlight_device *bd)
{
struct fbtft_par *par = bl_get_data(bd);
- bool polarity = !!(bd->props.state & BL_CORE_DRIVER1);
+ bool polarity = par->polarity;
fbtft_par_dbg(DEBUG_BACKLIGHT, par,
"%s: polarity=%d, power=%d, fb_blank=%d\n",
@@ -296,7 +296,7 @@
/* Assume backlight is off, get polarity from current state of pin */
bl_props.power = FB_BLANK_POWERDOWN;
if (!gpio_get_value(par->gpio.led[0]))
- bl_props.state |= BL_CORE_DRIVER1;
+ par->polarity = true;
bd = backlight_device_register(dev_driver_string(par->info->device),
par->info->device, par, &fbtft_bl_ops, &bl_props);
@@ -814,7 +814,7 @@
if (par->gamma.curves && gamma) {
if (fbtft_gamma_parse_str(par,
par->gamma.curves, gamma, strlen(gamma)))
- goto alloc_fail;
+ goto release_framebuf;
}
/* Transmit buffer */
@@ -839,7 +839,7 @@
txbuf = devm_kzalloc(par->info->device, txbuflen, GFP_KERNEL);
}
if (!txbuf)
- goto alloc_fail;
+ goto release_framebuf;
par->txbuf.buf = txbuf;
par->txbuf.len = txbuflen;
}
@@ -875,6 +875,9 @@
return info;
+release_framebuf:
+ framebuffer_release(info);
+
alloc_fail:
vfree(vmem);
diff --git a/drivers/staging/fbtft/fbtft.h b/drivers/staging/fbtft/fbtft.h
index 89c4b5b..0275319 100644
--- a/drivers/staging/fbtft/fbtft.h
+++ b/drivers/staging/fbtft/fbtft.h
@@ -241,6 +241,7 @@
ktime_t update_time;
bool bgr;
void *extra;
+ bool polarity;
};
#define NUMARGS(...) (sizeof((int[]){__VA_ARGS__})/sizeof(int))
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index 22e5116..bcdbf38 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -1673,8 +1673,10 @@
priv->hw->max_signal = 100;
- if (vnt_init(priv))
+ if (vnt_init(priv)) {
+ device_free_info(priv);
return -ENODEV;
+ }
device_print_info(priv);
pci_set_drvdata(pcid, priv);
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 6919082..a094a15 100755
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -407,7 +407,7 @@
mod_delayed_work(queue, &tz->poll_queue,
msecs_to_jiffies(delay));
else
- cancel_delayed_work(&tz->poll_queue);
+ cancel_delayed_work_sync(&tz->poll_queue);
}
static void monitor_thermal_zone(struct thermal_zone_device *tz)
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 817bb0d..9a54aaf 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -746,7 +746,8 @@
static void __exit ulite_exit(void)
{
platform_driver_unregister(&ulite_platform_driver);
- uart_unregister_driver(&ulite_uart_driver);
+ if (ulite_uart_driver.state)
+ uart_unregister_driver(&ulite_uart_driver);
}
module_init(ulite_init);
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 071964c..0669fbb 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -474,10 +474,12 @@
mutex_lock(&usblp_mutex);
usblp->used = 0;
- if (usblp->present) {
+ if (usblp->present)
usblp_unlink_urbs(usblp);
- usb_autopm_put_interface(usblp->intf);
- } else /* finish cleanup from disconnect */
+
+ usb_autopm_put_interface(usblp->intf);
+
+ if (!usblp->present) /* finish cleanup from disconnect */
usblp_cleanup(usblp);
mutex_unlock(&usblp_mutex);
return 0;
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index ab89fa3..2f7023a 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -50,6 +50,7 @@
#define DRIVER_VERSION "02 May 2005"
#define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */
+#define POWER_BUDGET_3 900 /* in mA */
static const char driver_name[] = "dummy_hcd";
static const char driver_desc[] = "USB Host+Gadget Emulator";
@@ -2433,7 +2434,7 @@
dum_hcd->rh_state = DUMMY_RH_RUNNING;
dum_hcd->stream_en_ep = 0;
INIT_LIST_HEAD(&dum_hcd->urbp_list);
- dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET;
+ dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3;
dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
#ifdef CONFIG_USB_OTG
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a142339..fd2bcff 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3190,10 +3190,10 @@
if (usb_urb_dir_out(urb)) {
len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
seg->bounce_buf, new_buff_len, enqd_len);
- if (len != seg->bounce_len)
+ if (len != new_buff_len)
xhci_warn(xhci,
"WARN Wrong bounce buffer write length: %zu != %d\n",
- len, seg->bounce_len);
+ len, new_buff_len);
seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
max_pkt, DMA_TO_DEVICE);
} else {
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 52495fc..919e0b8 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1028,7 +1028,7 @@
command |= CMD_CSS;
writel(command, &xhci->op_regs->command);
if (xhci_handshake(&xhci->op_regs->status,
- STS_SAVE, 0, 10 * 1000)) {
+ STS_SAVE, 0, 20 * 1000)) {
xhci_warn(xhci, "WARN: xHC save state timeout\n");
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
@@ -1089,6 +1089,18 @@
hibernated = true;
if (!hibernated) {
+ /*
+ * Some controllers might lose power during suspend, so wait
+ * for controller not ready bit to clear, just as in xHC init.
+ */
+ retval = xhci_handshake(&xhci->op_regs->status,
+ STS_CNR, 0, 10 * 1000 * 1000);
+ if (retval) {
+ xhci_warn(xhci, "Controller not ready at resume %d\n",
+ retval);
+ spin_unlock_irq(&xhci->lock);
+ return retval;
+ }
/* step 1: restore register */
xhci_restore_registers(xhci);
/* step 2: initialize command ring buffer */
@@ -4556,12 +4568,12 @@
alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev,
desc, state, timeout);
- /* If we found we can't enable hub-initiated LPM, or
+ /* If we found we can't enable hub-initiated LPM, and
* the U1 or U2 exit latency was too high to allow
- * device-initiated LPM as well, just stop searching.
+ * device-initiated LPM as well, then we will disable LPM
+ * for this device, so stop searching any further.
*/
- if (alt_timeout == USB3_LPM_DISABLED ||
- alt_timeout == USB3_LPM_DEVICE_INITIATED) {
+ if (alt_timeout == USB3_LPM_DISABLED) {
*timeout = alt_timeout;
return -E2BIG;
}
@@ -4672,10 +4684,12 @@
if (intf->dev.driver) {
driver = to_usb_driver(intf->dev.driver);
if (driver && driver->disable_hub_initiated_lpm) {
- dev_dbg(&udev->dev, "Hub-initiated %s disabled "
- "at request of driver %s\n",
- state_name, driver->name);
- return xhci_get_timeout_no_hub_lpm(udev, state);
+ dev_dbg(&udev->dev, "Hub-initiated %s disabled at request of driver %s\n",
+ state_name, driver->name);
+ timeout = xhci_get_timeout_no_hub_lpm(udev,
+ state);
+ if (timeout == USB3_LPM_DISABLED)
+ return timeout;
}
}
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index a4dbb0c..0fecc00 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -724,6 +724,10 @@
}
+ if (ep_in_current != &ep_in_set[2]) {
+ MTS_WARNING("couldn't find two input bulk endpoints. Bailing out.\n");
+ return -ENODEV;
+ }
if ( ep_out == -1 ) {
MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 47b3577..2de07a3 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -46,16 +46,6 @@
To compile this driver as a module, choose M here: the
module will be called usbsevseg.
-config USB_RIO500
- tristate "USB Diamond Rio500 support"
- help
- Say Y here if you want to connect a USB Rio500 mp3 player to your
- computer's USB port. Please read <file:Documentation/usb/rio.txt>
- for more information.
-
- To compile this driver as a module, choose M here: the
- module will be called rio500.
-
config USB_LEGOTOWER
tristate "USB Lego Infrared Tower support"
help
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 3d19927..2b21872 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -16,7 +16,6 @@
obj-$(CONFIG_USB_LCD) += usblcd.o
obj-$(CONFIG_USB_LD) += ldusb.o
obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o
-obj-$(CONFIG_USB_RIO500) += rio500.o
obj-$(CONFIG_USB_TEST) += usbtest.o
obj-$(CONFIG_USB_EHSET_TEST_FIXTURE) += ehset.o
obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 564268f..f0c071d 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -80,6 +80,7 @@
char serial_number[8];
int open_count; /* number of times this port has been opened */
+ unsigned long disconnected:1;
char *read_buffer_primary;
int read_buffer_length;
@@ -121,7 +122,7 @@
{
unsigned long flags;
- if (dev->udev == NULL)
+ if (dev->disconnected)
return;
/* shutdown transfer */
@@ -151,6 +152,7 @@
kfree(dev->read_buffer_secondary);
kfree(dev->interrupt_in_buffer);
kfree(dev->interrupt_out_buffer);
+ usb_put_dev(dev->udev);
kfree(dev);
}
@@ -244,7 +246,7 @@
}
dev = usb_get_intfdata(interface);
- if (!dev || !dev->udev) {
+ if (!dev) {
retval = -ENODEV;
goto exit_no_device;
}
@@ -327,7 +329,7 @@
}
adu_release_internal(dev);
- if (dev->udev == NULL) {
+ if (dev->disconnected) {
/* the device was unplugged before the file was released */
if (!dev->open_count) /* ... and we're the last user */
adu_delete(dev);
@@ -356,7 +358,7 @@
return -ERESTARTSYS;
/* verify that the device wasn't unplugged */
- if (dev->udev == NULL) {
+ if (dev->disconnected) {
retval = -ENODEV;
pr_err("No device or device unplugged %d\n", retval);
goto exit;
@@ -525,7 +527,7 @@
goto exit_nolock;
/* verify that the device wasn't unplugged */
- if (dev->udev == NULL) {
+ if (dev->disconnected) {
retval = -ENODEV;
pr_err("No device or device unplugged %d\n", retval);
goto exit;
@@ -679,7 +681,7 @@
mutex_init(&dev->mtx);
spin_lock_init(&dev->buflock);
- dev->udev = udev;
+ dev->udev = usb_get_dev(udev);
init_waitqueue_head(&dev->read_wait);
init_waitqueue_head(&dev->write_wait);
@@ -789,19 +791,21 @@
static void adu_disconnect(struct usb_interface *interface)
{
struct adu_device *dev;
- int minor;
dev = usb_get_intfdata(interface);
- mutex_lock(&dev->mtx); /* not interruptible */
- dev->udev = NULL; /* poison */
- minor = dev->minor;
usb_deregister_dev(interface, &adu_class);
- mutex_unlock(&dev->mtx);
+
+ usb_poison_urb(dev->interrupt_in_urb);
+ usb_poison_urb(dev->interrupt_out_urb);
mutex_lock(&adutux_mutex);
usb_set_intfdata(interface, NULL);
+ mutex_lock(&dev->mtx); /* not interruptible */
+ dev->disconnected = 1;
+ mutex_unlock(&dev->mtx);
+
/* if the device is not opened, then we clean up right now */
if (!dev->open_count)
adu_delete(dev);
diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c
index efecb87..64f2eef 100644
--- a/drivers/usb/misc/chaoskey.c
+++ b/drivers/usb/misc/chaoskey.c
@@ -108,6 +108,7 @@
usb_free_urb(dev->urb);
kfree(dev->name);
kfree(dev->buf);
+ usb_put_intf(dev->interface);
kfree(dev);
}
}
@@ -157,6 +158,8 @@
if (dev == NULL)
goto out;
+ dev->interface = usb_get_intf(interface);
+
dev->buf = kmalloc(size, GFP_KERNEL);
if (dev->buf == NULL)
@@ -190,8 +193,6 @@
strcat(dev->name, udev->serial);
}
- dev->interface = interface;
-
dev->in_ep = in_ep;
if (le16_to_cpu(udev->descriptor.idVendor) != ALEA_VENDOR_ID)
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 318e087..1b83946 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -89,6 +89,7 @@
char chip_serial[9]; /* the serial number string of the chip connected */
int report_size; /* number of bytes in a report */
u16 product_id;
+ struct usb_anchor submitted;
};
/*--------------*/
@@ -248,6 +249,7 @@
kfree(dev->int_in_buffer);
usb_free_urb(dev->int_in_urb);
kfree(dev->read_queue);
+ usb_put_intf(dev->interface);
kfree(dev);
}
@@ -434,11 +436,13 @@
retval = -EFAULT;
goto error;
}
+ usb_anchor_urb(int_out_urb, &dev->submitted);
retval = usb_submit_urb(int_out_urb, GFP_KERNEL);
if (retval) {
dev_dbg(&dev->interface->dev,
"submit error %d for urb nr.%d\n",
retval, atomic_read(&dev->write_busy));
+ usb_unanchor_urb(int_out_urb);
goto error;
}
/* submit was ok */
@@ -776,11 +780,13 @@
init_waitqueue_head(&dev->write_wait);
dev->udev = udev;
- dev->interface = interface;
+ dev->interface = usb_get_intf(interface);
iface_desc = interface->cur_altsetting;
dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
+ init_usb_anchor(&dev->submitted);
+
/* set up the endpoint information */
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
@@ -886,8 +892,6 @@
dev = usb_get_intfdata(interface);
mutex_lock(&iowarrior_open_disc_lock);
usb_set_intfdata(interface, NULL);
- /* prevent device read, write and ioctl */
- dev->present = 0;
minor = dev->minor;
mutex_unlock(&iowarrior_open_disc_lock);
@@ -898,8 +902,7 @@
mutex_lock(&dev->mutex);
/* prevent device read, write and ioctl */
-
- mutex_unlock(&dev->mutex);
+ dev->present = 0;
if (dev->opened) {
/* There is a process that holds a filedescriptor to the device ,
@@ -907,10 +910,13 @@
Deleting the device is postponed until close() was called.
*/
usb_kill_urb(dev->int_in_urb);
+ usb_kill_anchored_urbs(&dev->submitted);
wake_up_interruptible(&dev->read_wait);
wake_up_interruptible(&dev->write_wait);
+ mutex_unlock(&dev->mutex);
} else {
/* no process is using the device, cleanup now */
+ mutex_unlock(&dev->mutex);
iowarrior_delete(dev);
}
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index c5e3032..eee69c9 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -158,6 +158,7 @@
struct ld_usb {
struct mutex mutex; /* locks this structure */
struct usb_interface* intf; /* save off the usb interface pointer */
+ unsigned long disconnected:1;
int open_count; /* number of times this port has been opened */
@@ -197,12 +198,10 @@
/* shutdown transfer */
if (dev->interrupt_in_running) {
dev->interrupt_in_running = 0;
- if (dev->intf)
- usb_kill_urb(dev->interrupt_in_urb);
+ usb_kill_urb(dev->interrupt_in_urb);
}
if (dev->interrupt_out_busy)
- if (dev->intf)
- usb_kill_urb(dev->interrupt_out_urb);
+ usb_kill_urb(dev->interrupt_out_urb);
}
/**
@@ -210,8 +209,6 @@
*/
static void ld_usb_delete(struct ld_usb *dev)
{
- ld_usb_abort_transfers(dev);
-
/* free data structures */
usb_free_urb(dev->interrupt_in_urb);
usb_free_urb(dev->interrupt_out_urb);
@@ -267,7 +264,7 @@
resubmit:
/* resubmit if we're still running */
- if (dev->interrupt_in_running && !dev->buffer_overflow && dev->intf) {
+ if (dev->interrupt_in_running && !dev->buffer_overflow) {
retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC);
if (retval) {
dev_err(&dev->intf->dev,
@@ -396,7 +393,7 @@
retval = -ENODEV;
goto unlock_exit;
}
- if (dev->intf == NULL) {
+ if (dev->disconnected) {
/* the device was unplugged before the file was released */
mutex_unlock(&dev->mutex);
/* unlock here as ld_usb_delete frees dev */
@@ -427,7 +424,7 @@
dev = file->private_data;
- if (!dev->intf)
+ if (dev->disconnected)
return POLLERR | POLLHUP;
poll_wait(file, &dev->read_wait, wait);
@@ -466,7 +463,7 @@
}
/* verify that the device wasn't unplugged */
- if (dev->intf == NULL) {
+ if (dev->disconnected) {
retval = -ENODEV;
printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
goto unlock_exit;
@@ -546,7 +543,7 @@
}
/* verify that the device wasn't unplugged */
- if (dev->intf == NULL) {
+ if (dev->disconnected) {
retval = -ENODEV;
printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
goto unlock_exit;
@@ -768,6 +765,9 @@
/* give back our minor */
usb_deregister_dev(intf, &ld_usb_class);
+ usb_poison_urb(dev->interrupt_in_urb);
+ usb_poison_urb(dev->interrupt_out_urb);
+
mutex_lock(&dev->mutex);
/* if the device is not opened, then we clean up right now */
@@ -775,7 +775,7 @@
mutex_unlock(&dev->mutex);
ld_usb_delete(dev);
} else {
- dev->intf = NULL;
+ dev->disconnected = 1;
/* wake up pollers */
wake_up_interruptible_all(&dev->read_wait);
wake_up_interruptible_all(&dev->write_wait);
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index c2e2b2e..321756f 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -185,7 +185,6 @@
};
MODULE_DEVICE_TABLE (usb, tower_table);
-static DEFINE_MUTEX(open_disc_mutex);
#define LEGO_USB_TOWER_MINOR_BASE 160
@@ -197,6 +196,7 @@
unsigned char minor; /* the starting minor number for this device */
int open_count; /* number of times this port has been opened */
+ unsigned long disconnected:1;
char* read_buffer;
size_t read_buffer_length; /* this much came in */
@@ -296,14 +296,13 @@
*/
static inline void tower_delete (struct lego_usb_tower *dev)
{
- tower_abort_transfers (dev);
-
/* free data structures */
usb_free_urb(dev->interrupt_in_urb);
usb_free_urb(dev->interrupt_out_urb);
kfree (dev->read_buffer);
kfree (dev->interrupt_in_buffer);
kfree (dev->interrupt_out_buffer);
+ usb_put_dev(dev->udev);
kfree (dev);
}
@@ -338,18 +337,14 @@
goto exit;
}
- mutex_lock(&open_disc_mutex);
dev = usb_get_intfdata(interface);
-
if (!dev) {
- mutex_unlock(&open_disc_mutex);
retval = -ENODEV;
goto exit;
}
/* lock this device */
if (mutex_lock_interruptible(&dev->lock)) {
- mutex_unlock(&open_disc_mutex);
retval = -ERESTARTSYS;
goto exit;
}
@@ -357,12 +352,9 @@
/* allow opening only once */
if (dev->open_count) {
- mutex_unlock(&open_disc_mutex);
retval = -EBUSY;
goto unlock_exit;
}
- dev->open_count = 1;
- mutex_unlock(&open_disc_mutex);
/* reset the tower */
result = usb_control_msg (dev->udev,
@@ -402,13 +394,14 @@
dev_err(&dev->udev->dev,
"Couldn't submit interrupt_in_urb %d\n", retval);
dev->interrupt_in_running = 0;
- dev->open_count = 0;
goto unlock_exit;
}
/* save device in the file's private structure */
file->private_data = dev;
+ dev->open_count = 1;
+
unlock_exit:
mutex_unlock(&dev->lock);
@@ -429,10 +422,9 @@
if (dev == NULL) {
retval = -ENODEV;
- goto exit_nolock;
+ goto exit;
}
- mutex_lock(&open_disc_mutex);
if (mutex_lock_interruptible(&dev->lock)) {
retval = -ERESTARTSYS;
goto exit;
@@ -444,7 +436,8 @@
retval = -ENODEV;
goto unlock_exit;
}
- if (dev->udev == NULL) {
+
+ if (dev->disconnected) {
/* the device was unplugged before the file was released */
/* unlock here as tower_delete frees dev */
@@ -462,10 +455,7 @@
unlock_exit:
mutex_unlock(&dev->lock);
-
exit:
- mutex_unlock(&open_disc_mutex);
-exit_nolock:
return retval;
}
@@ -483,10 +473,9 @@
if (dev->interrupt_in_running) {
dev->interrupt_in_running = 0;
mb();
- if (dev->udev)
- usb_kill_urb (dev->interrupt_in_urb);
+ usb_kill_urb(dev->interrupt_in_urb);
}
- if (dev->interrupt_out_busy && dev->udev)
+ if (dev->interrupt_out_busy)
usb_kill_urb(dev->interrupt_out_urb);
}
@@ -522,7 +511,7 @@
dev = file->private_data;
- if (!dev->udev)
+ if (dev->disconnected)
return POLLERR | POLLHUP;
poll_wait(file, &dev->read_wait, wait);
@@ -569,7 +558,7 @@
}
/* verify that the device wasn't unplugged */
- if (dev->udev == NULL) {
+ if (dev->disconnected) {
retval = -ENODEV;
pr_err("No device or device unplugged %d\n", retval);
goto unlock_exit;
@@ -655,7 +644,7 @@
}
/* verify that the device wasn't unplugged */
- if (dev->udev == NULL) {
+ if (dev->disconnected) {
retval = -ENODEV;
pr_err("No device or device unplugged %d\n", retval);
goto unlock_exit;
@@ -764,7 +753,7 @@
resubmit:
/* resubmit if we're still running */
- if (dev->interrupt_in_running && dev->udev) {
+ if (dev->interrupt_in_running) {
retval = usb_submit_urb (dev->interrupt_in_urb, GFP_ATOMIC);
if (retval)
dev_err(&dev->udev->dev,
@@ -830,8 +819,9 @@
mutex_init(&dev->lock);
- dev->udev = udev;
+ dev->udev = usb_get_dev(udev);
dev->open_count = 0;
+ dev->disconnected = 0;
dev->read_buffer = NULL;
dev->read_buffer_length = 0;
@@ -911,8 +901,10 @@
get_version_reply,
sizeof(*get_version_reply),
1000);
- if (result < 0) {
- dev_err(idev, "LEGO USB Tower get version control request failed\n");
+ if (result < sizeof(*get_version_reply)) {
+ if (result >= 0)
+ result = -EIO;
+ dev_err(idev, "get version request failed: %d\n", result);
retval = result;
goto error;
}
@@ -930,7 +922,6 @@
if (retval) {
/* something prevented us from registering this driver */
dev_err(idev, "Not able to get a minor for this device.\n");
- usb_set_intfdata (interface, NULL);
goto error;
}
dev->minor = interface->minor;
@@ -962,23 +953,24 @@
int minor;
dev = usb_get_intfdata (interface);
- mutex_lock(&open_disc_mutex);
- usb_set_intfdata (interface, NULL);
minor = dev->minor;
- /* give back our minor */
+ /* give back our minor and prevent further open() */
usb_deregister_dev (interface, &tower_class);
+ /* stop I/O */
+ usb_poison_urb(dev->interrupt_in_urb);
+ usb_poison_urb(dev->interrupt_out_urb);
+
mutex_lock(&dev->lock);
- mutex_unlock(&open_disc_mutex);
/* if the device is not opened, then we clean up right now */
if (!dev->open_count) {
mutex_unlock(&dev->lock);
tower_delete (dev);
} else {
- dev->udev = NULL;
+ dev->disconnected = 1;
/* wake up pollers */
wake_up_interruptible_all(&dev->read_wait);
wake_up_interruptible_all(&dev->write_wait);
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
deleted file mode 100644
index 6e761fa..0000000
--- a/drivers/usb/misc/rio500.c
+++ /dev/null
@@ -1,578 +0,0 @@
-/* -*- linux-c -*- */
-
-/*
- * Driver for USB Rio 500
- *
- * Cesar Miquel (miquel@df.uba.ar)
- *
- * based on hp_scanner.c by David E. Nelson (dnelson@jump.net)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Based upon mouse.c (Brad Keryan) and printer.c (Michael Gee).
- *
- * Changelog:
- * 30/05/2003 replaced lock/unlock kernel with up/down
- * Daniele Bellucci bellucda@tiscali.it
- * */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/random.h>
-#include <linux/poll.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/usb.h>
-#include <linux/wait.h>
-
-#include "rio500_usb.h"
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.1"
-#define DRIVER_AUTHOR "Cesar Miquel <miquel@df.uba.ar>"
-#define DRIVER_DESC "USB Rio 500 driver"
-
-#define RIO_MINOR 64
-
-/* stall/wait timeout for rio */
-#define NAK_TIMEOUT (HZ)
-
-#define IBUF_SIZE 0x1000
-
-/* Size of the rio buffer */
-#define OBUF_SIZE 0x10000
-
-struct rio_usb_data {
- struct usb_device *rio_dev; /* init: probe_rio */
- unsigned int ifnum; /* Interface number of the USB device */
- int isopen; /* nz if open */
- int present; /* Device is present on the bus */
- char *obuf, *ibuf; /* transfer buffers */
- char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */
- wait_queue_head_t wait_q; /* for timeouts */
- struct mutex lock; /* general race avoidance */
-};
-
-static DEFINE_MUTEX(rio500_mutex);
-static struct rio_usb_data rio_instance;
-
-static int open_rio(struct inode *inode, struct file *file)
-{
- struct rio_usb_data *rio = &rio_instance;
-
- /* against disconnect() */
- mutex_lock(&rio500_mutex);
- mutex_lock(&(rio->lock));
-
- if (rio->isopen || !rio->present) {
- mutex_unlock(&(rio->lock));
- mutex_unlock(&rio500_mutex);
- return -EBUSY;
- }
- rio->isopen = 1;
-
- init_waitqueue_head(&rio->wait_q);
-
- mutex_unlock(&(rio->lock));
-
- dev_info(&rio->rio_dev->dev, "Rio opened.\n");
- mutex_unlock(&rio500_mutex);
-
- return 0;
-}
-
-static int close_rio(struct inode *inode, struct file *file)
-{
- struct rio_usb_data *rio = &rio_instance;
-
- /* against disconnect() */
- mutex_lock(&rio500_mutex);
- mutex_lock(&(rio->lock));
-
- rio->isopen = 0;
- if (!rio->present) {
- /* cleanup has been delayed */
- kfree(rio->ibuf);
- kfree(rio->obuf);
- rio->ibuf = NULL;
- rio->obuf = NULL;
- } else {
- dev_info(&rio->rio_dev->dev, "Rio closed.\n");
- }
- mutex_unlock(&(rio->lock));
- mutex_unlock(&rio500_mutex);
- return 0;
-}
-
-static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
-{
- struct RioCommand rio_cmd;
- struct rio_usb_data *rio = &rio_instance;
- void __user *data;
- unsigned char *buffer;
- int result, requesttype;
- int retries;
- int retval=0;
-
- mutex_lock(&(rio->lock));
- /* Sanity check to make sure rio is connected, powered, etc */
- if (rio->present == 0 || rio->rio_dev == NULL) {
- retval = -ENODEV;
- goto err_out;
- }
-
- switch (cmd) {
- case RIO_RECV_COMMAND:
- data = (void __user *) arg;
- if (data == NULL)
- break;
- if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) {
- retval = -EFAULT;
- goto err_out;
- }
- if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
- retval = -EINVAL;
- goto err_out;
- }
- buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
- if (buffer == NULL) {
- retval = -ENOMEM;
- goto err_out;
- }
- if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) {
- retval = -EFAULT;
- free_page((unsigned long) buffer);
- goto err_out;
- }
-
- requesttype = rio_cmd.requesttype | USB_DIR_IN |
- USB_TYPE_VENDOR | USB_RECIP_DEVICE;
- dev_dbg(&rio->rio_dev->dev,
- "sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
- requesttype, rio_cmd.request, rio_cmd.value,
- rio_cmd.index, rio_cmd.length);
- /* Send rio control message */
- retries = 3;
- while (retries) {
- result = usb_control_msg(rio->rio_dev,
- usb_rcvctrlpipe(rio-> rio_dev, 0),
- rio_cmd.request,
- requesttype,
- rio_cmd.value,
- rio_cmd.index, buffer,
- rio_cmd.length,
- jiffies_to_msecs(rio_cmd.timeout));
- if (result == -ETIMEDOUT)
- retries--;
- else if (result < 0) {
- dev_err(&rio->rio_dev->dev,
- "Error executing ioctrl. code = %d\n",
- result);
- retries = 0;
- } else {
- dev_dbg(&rio->rio_dev->dev,
- "Executed ioctl. Result = %d (data=%02x)\n",
- result, buffer[0]);
- if (copy_to_user(rio_cmd.buffer, buffer,
- rio_cmd.length)) {
- free_page((unsigned long) buffer);
- retval = -EFAULT;
- goto err_out;
- }
- retries = 0;
- }
-
- /* rio_cmd.buffer contains a raw stream of single byte
- data which has been returned from rio. Data is
- interpreted at application level. For data that
- will be cast to data types longer than 1 byte, data
- will be little_endian and will potentially need to
- be swapped at the app level */
-
- }
- free_page((unsigned long) buffer);
- break;
-
- case RIO_SEND_COMMAND:
- data = (void __user *) arg;
- if (data == NULL)
- break;
- if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) {
- retval = -EFAULT;
- goto err_out;
- }
- if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
- retval = -EINVAL;
- goto err_out;
- }
- buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
- if (buffer == NULL) {
- retval = -ENOMEM;
- goto err_out;
- }
- if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) {
- free_page((unsigned long)buffer);
- retval = -EFAULT;
- goto err_out;
- }
-
- requesttype = rio_cmd.requesttype | USB_DIR_OUT |
- USB_TYPE_VENDOR | USB_RECIP_DEVICE;
- dev_dbg(&rio->rio_dev->dev,
- "sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
- requesttype, rio_cmd.request, rio_cmd.value,
- rio_cmd.index, rio_cmd.length);
- /* Send rio control message */
- retries = 3;
- while (retries) {
- result = usb_control_msg(rio->rio_dev,
- usb_sndctrlpipe(rio-> rio_dev, 0),
- rio_cmd.request,
- requesttype,
- rio_cmd.value,
- rio_cmd.index, buffer,
- rio_cmd.length,
- jiffies_to_msecs(rio_cmd.timeout));
- if (result == -ETIMEDOUT)
- retries--;
- else if (result < 0) {
- dev_err(&rio->rio_dev->dev,
- "Error executing ioctrl. code = %d\n",
- result);
- retries = 0;
- } else {
- dev_dbg(&rio->rio_dev->dev,
- "Executed ioctl. Result = %d\n", result);
- retries = 0;
-
- }
-
- }
- free_page((unsigned long) buffer);
- break;
-
- default:
- retval = -ENOTTY;
- break;
- }
-
-
-err_out:
- mutex_unlock(&(rio->lock));
- return retval;
-}
-
-static ssize_t
-write_rio(struct file *file, const char __user *buffer,
- size_t count, loff_t * ppos)
-{
- DEFINE_WAIT(wait);
- struct rio_usb_data *rio = &rio_instance;
-
- unsigned long copy_size;
- unsigned long bytes_written = 0;
- unsigned int partial;
-
- int result = 0;
- int maxretry;
- int errn = 0;
- int intr;
-
- intr = mutex_lock_interruptible(&(rio->lock));
- if (intr)
- return -EINTR;
- /* Sanity check to make sure rio is connected, powered, etc */
- if (rio->present == 0 || rio->rio_dev == NULL) {
- mutex_unlock(&(rio->lock));
- return -ENODEV;
- }
-
-
-
- do {
- unsigned long thistime;
- char *obuf = rio->obuf;
-
- thistime = copy_size =
- (count >= OBUF_SIZE) ? OBUF_SIZE : count;
- if (copy_from_user(rio->obuf, buffer, copy_size)) {
- errn = -EFAULT;
- goto error;
- }
- maxretry = 5;
- while (thistime) {
- if (!rio->rio_dev) {
- errn = -ENODEV;
- goto error;
- }
- if (signal_pending(current)) {
- mutex_unlock(&(rio->lock));
- return bytes_written ? bytes_written : -EINTR;
- }
-
- result = usb_bulk_msg(rio->rio_dev,
- usb_sndbulkpipe(rio->rio_dev, 2),
- obuf, thistime, &partial, 5000);
-
- dev_dbg(&rio->rio_dev->dev,
- "write stats: result:%d thistime:%lu partial:%u\n",
- result, thistime, partial);
-
- if (result == -ETIMEDOUT) { /* NAK - so hold for a while */
- if (!maxretry--) {
- errn = -ETIME;
- goto error;
- }
- prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
- schedule_timeout(NAK_TIMEOUT);
- finish_wait(&rio->wait_q, &wait);
- continue;
- } else if (!result && partial) {
- obuf += partial;
- thistime -= partial;
- } else
- break;
- }
- if (result) {
- dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n",
- result);
- errn = -EIO;
- goto error;
- }
- bytes_written += copy_size;
- count -= copy_size;
- buffer += copy_size;
- } while (count > 0);
-
- mutex_unlock(&(rio->lock));
-
- return bytes_written ? bytes_written : -EIO;
-
-error:
- mutex_unlock(&(rio->lock));
- return errn;
-}
-
-static ssize_t
-read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
-{
- DEFINE_WAIT(wait);
- struct rio_usb_data *rio = &rio_instance;
- ssize_t read_count;
- unsigned int partial;
- int this_read;
- int result;
- int maxretry = 10;
- char *ibuf;
- int intr;
-
- intr = mutex_lock_interruptible(&(rio->lock));
- if (intr)
- return -EINTR;
- /* Sanity check to make sure rio is connected, powered, etc */
- if (rio->present == 0 || rio->rio_dev == NULL) {
- mutex_unlock(&(rio->lock));
- return -ENODEV;
- }
-
- ibuf = rio->ibuf;
-
- read_count = 0;
-
-
- while (count > 0) {
- if (signal_pending(current)) {
- mutex_unlock(&(rio->lock));
- return read_count ? read_count : -EINTR;
- }
- if (!rio->rio_dev) {
- mutex_unlock(&(rio->lock));
- return -ENODEV;
- }
- this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count;
-
- result = usb_bulk_msg(rio->rio_dev,
- usb_rcvbulkpipe(rio->rio_dev, 1),
- ibuf, this_read, &partial,
- 8000);
-
- dev_dbg(&rio->rio_dev->dev,
- "read stats: result:%d this_read:%u partial:%u\n",
- result, this_read, partial);
-
- if (partial) {
- count = this_read = partial;
- } else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */
- if (!maxretry--) {
- mutex_unlock(&(rio->lock));
- dev_err(&rio->rio_dev->dev,
- "read_rio: maxretry timeout\n");
- return -ETIME;
- }
- prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
- schedule_timeout(NAK_TIMEOUT);
- finish_wait(&rio->wait_q, &wait);
- continue;
- } else if (result != -EREMOTEIO) {
- mutex_unlock(&(rio->lock));
- dev_err(&rio->rio_dev->dev,
- "Read Whoops - result:%u partial:%u this_read:%u\n",
- result, partial, this_read);
- return -EIO;
- } else {
- mutex_unlock(&(rio->lock));
- return (0);
- }
-
- if (this_read) {
- if (copy_to_user(buffer, ibuf, this_read)) {
- mutex_unlock(&(rio->lock));
- return -EFAULT;
- }
- count -= this_read;
- read_count += this_read;
- buffer += this_read;
- }
- }
- mutex_unlock(&(rio->lock));
- return read_count;
-}
-
-static const struct file_operations usb_rio_fops = {
- .owner = THIS_MODULE,
- .read = read_rio,
- .write = write_rio,
- .unlocked_ioctl = ioctl_rio,
- .open = open_rio,
- .release = close_rio,
- .llseek = noop_llseek,
-};
-
-static struct usb_class_driver usb_rio_class = {
- .name = "rio500%d",
- .fops = &usb_rio_fops,
- .minor_base = RIO_MINOR,
-};
-
-static int probe_rio(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- struct usb_device *dev = interface_to_usbdev(intf);
- struct rio_usb_data *rio = &rio_instance;
- int retval = 0;
-
- mutex_lock(&rio500_mutex);
- if (rio->present) {
- dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum);
- retval = -EBUSY;
- goto bail_out;
- } else {
- dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
- }
-
- retval = usb_register_dev(intf, &usb_rio_class);
- if (retval) {
- dev_err(&dev->dev,
- "Not able to get a minor for this device.\n");
- retval = -ENOMEM;
- goto bail_out;
- }
-
- rio->rio_dev = dev;
-
- if (!(rio->obuf = kmalloc(OBUF_SIZE, GFP_KERNEL))) {
- dev_err(&dev->dev,
- "probe_rio: Not enough memory for the output buffer\n");
- usb_deregister_dev(intf, &usb_rio_class);
- retval = -ENOMEM;
- goto bail_out;
- }
- dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf);
-
- if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) {
- dev_err(&dev->dev,
- "probe_rio: Not enough memory for the input buffer\n");
- usb_deregister_dev(intf, &usb_rio_class);
- kfree(rio->obuf);
- retval = -ENOMEM;
- goto bail_out;
- }
- dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf);
-
- mutex_init(&(rio->lock));
-
- usb_set_intfdata (intf, rio);
- rio->present = 1;
-bail_out:
- mutex_unlock(&rio500_mutex);
-
- return retval;
-}
-
-static void disconnect_rio(struct usb_interface *intf)
-{
- struct rio_usb_data *rio = usb_get_intfdata (intf);
-
- usb_set_intfdata (intf, NULL);
- mutex_lock(&rio500_mutex);
- if (rio) {
- usb_deregister_dev(intf, &usb_rio_class);
-
- mutex_lock(&(rio->lock));
- if (rio->isopen) {
- rio->isopen = 0;
- /* better let it finish - the release will do whats needed */
- rio->rio_dev = NULL;
- mutex_unlock(&(rio->lock));
- mutex_unlock(&rio500_mutex);
- return;
- }
- kfree(rio->ibuf);
- kfree(rio->obuf);
-
- dev_info(&intf->dev, "USB Rio disconnected.\n");
-
- rio->present = 0;
- mutex_unlock(&(rio->lock));
- }
- mutex_unlock(&rio500_mutex);
-}
-
-static const struct usb_device_id rio_table[] = {
- { USB_DEVICE(0x0841, 1) }, /* Rio 500 */
- { } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, rio_table);
-
-static struct usb_driver rio_driver = {
- .name = "rio500",
- .probe = probe_rio,
- .disconnect = disconnect_rio,
- .id_table = rio_table,
-};
-
-module_usb_driver(rio_driver);
-
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/usb/misc/rio500_usb.h b/drivers/usb/misc/rio500_usb.h
deleted file mode 100644
index 359abc9..0000000
--- a/drivers/usb/misc/rio500_usb.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* ----------------------------------------------------------------------
-
- Copyright (C) 2000 Cesar Miquel (miquel@df.uba.ar)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- ---------------------------------------------------------------------- */
-
-
-
-#define RIO_SEND_COMMAND 0x1
-#define RIO_RECV_COMMAND 0x2
-
-#define RIO_DIR_OUT 0x0
-#define RIO_DIR_IN 0x1
-
-struct RioCommand {
- short length;
- int request;
- int requesttype;
- int value;
- int index;
- void __user *buffer;
- int timeout;
-};
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 9f48419..35a736e 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -17,6 +17,7 @@
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/mutex.h>
+#include <linux/rwsem.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
@@ -56,6 +57,8 @@
using up all RAM */
struct usb_anchor submitted; /* URBs to wait for
before suspend */
+ struct rw_semaphore io_rwsem;
+ unsigned long disconnected:1;
};
#define to_lcd_dev(d) container_of(d, struct usb_lcd, kref)
@@ -141,6 +144,13 @@
dev = file->private_data;
+ down_read(&dev->io_rwsem);
+
+ if (dev->disconnected) {
+ retval = -ENODEV;
+ goto out_up_io;
+ }
+
/* do a blocking bulk read to get data from the device */
retval = usb_bulk_msg(dev->udev,
usb_rcvbulkpipe(dev->udev,
@@ -157,6 +167,9 @@
retval = bytes_read;
}
+out_up_io:
+ up_read(&dev->io_rwsem);
+
return retval;
}
@@ -236,11 +249,18 @@
if (r < 0)
return -EINTR;
+ down_read(&dev->io_rwsem);
+
+ if (dev->disconnected) {
+ retval = -ENODEV;
+ goto err_up_io;
+ }
+
/* create a urb, and a buffer for it, and copy the data to the urb */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
retval = -ENOMEM;
- goto err_no_buf;
+ goto err_up_io;
}
buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL,
@@ -277,6 +297,7 @@
the USB core will eventually free it entirely */
usb_free_urb(urb);
+ up_read(&dev->io_rwsem);
exit:
return count;
error_unanchor:
@@ -284,7 +305,8 @@
error:
usb_free_coherent(dev->udev, count, buf, urb->transfer_dma);
usb_free_urb(urb);
-err_no_buf:
+err_up_io:
+ up_read(&dev->io_rwsem);
up(&dev->limit_sem);
return retval;
}
@@ -325,6 +347,7 @@
goto error;
kref_init(&dev->kref);
sema_init(&dev->limit_sem, USB_LCD_CONCURRENT_WRITES);
+ init_rwsem(&dev->io_rwsem);
init_usb_anchor(&dev->submitted);
dev->udev = usb_get_dev(interface_to_usbdev(interface));
@@ -432,6 +455,12 @@
/* give back our minor */
usb_deregister_dev(interface, &lcd_class);
+ down_write(&dev->io_rwsem);
+ dev->disconnected = 1;
+ up_write(&dev->io_rwsem);
+
+ usb_kill_anchored_urbs(&dev->submitted);
+
/* decrement our usage count */
kref_put(&dev->kref, lcd_delete);
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 9744e5f..2350502 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -64,6 +64,7 @@
struct kref kref;
struct mutex io_mutex;
+ unsigned long disconnected:1;
struct fasync_struct *async_queue;
wait_queue_head_t waitq;
@@ -111,6 +112,7 @@
dev->int_buffer, dev->urb->transfer_dma);
usb_free_urb(dev->urb);
}
+ usb_put_intf(dev->interface);
usb_put_dev(dev->udev);
kfree(dev);
}
@@ -136,6 +138,7 @@
switch (status) {
case 0: /*success*/
break;
+ /* The device is terminated or messed up, give up */
case -EOVERFLOW:
dev_err(&dev->interface->dev,
"%s - overflow with length %d, actual length is %d\n",
@@ -144,12 +147,13 @@
case -ENOENT:
case -ESHUTDOWN:
case -EILSEQ:
- /* The device is terminated, clean up */
+ case -EPROTO:
+ case -ETIME:
return;
default:
dev_err(&dev->interface->dev,
"%s - unknown status received: %d\n", __func__, status);
- goto exit;
+ return;
}
/* handle received message */
@@ -181,7 +185,6 @@
break;
}
-exit:
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
if (retval) {
dev_err(&dev->interface->dev, "%s - usb_submit_urb failed: %d\n",
@@ -208,7 +211,7 @@
init_waitqueue_head(&dev->waitq);
dev->udev = usb_get_dev(interface_to_usbdev(interface));
- dev->interface = interface;
+ dev->interface = usb_get_intf(interface);
/* set up the endpoint information */
iface_desc = interface->cur_altsetting;
@@ -325,8 +328,9 @@
/* prevent more I/O from starting */
usb_poison_urb(dev->urb);
+ usb_poison_urb(dev->cntl_urb);
mutex_lock(&dev->io_mutex);
- dev->interface = NULL;
+ dev->disconnected = 1;
mutex_unlock(&dev->io_mutex);
/* wakeup waiters */
@@ -414,7 +418,7 @@
dev = file->private_data;
mutex_lock(&dev->io_mutex);
- if (!dev->interface) { /* already disconnected */
+ if (dev->disconnected) { /* already disconnected */
mutex_unlock(&dev->io_mutex);
return -ENODEV;
}
@@ -449,7 +453,7 @@
goto error;
mutex_lock(&dev->io_mutex);
- if (!dev->interface) { /* already disconnected */
+ if (dev->disconnected) { /* already disconnected */
mutex_unlock(&dev->io_mutex);
retval = -ENODEV;
goto error;
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index 8c5fc12..b8620aa 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -213,6 +213,7 @@
/* DCPCTR */
#define BSTS (1 << 15) /* Buffer Status */
#define SUREQ (1 << 14) /* Sending SETUP Token */
+#define INBUFM (1 << 14) /* (PIPEnCTR) Transfer Buffer Monitor */
#define CSSTS (1 << 12) /* CSSTS Status */
#define ACLRM (1 << 9) /* Buffer Auto-Clear Mode */
#define SQCLR (1 << 8) /* Toggle Bit Clear */
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 6965605..f6a1ae8 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -98,7 +98,7 @@
list_del_init(&pkt->node);
}
-static struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
{
if (list_empty(&pipe->list))
return NULL;
diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h
index 8b98507..c1fb392 100644
--- a/drivers/usb/renesas_usbhs/fifo.h
+++ b/drivers/usb/renesas_usbhs/fifo.h
@@ -106,5 +106,6 @@
void *buf, int len, int zero, int sequence);
struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt);
void usbhs_pkt_start(struct usbhs_pipe *pipe);
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe);
#endif /* RENESAS_USB_FIFO_H */
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 5984fb1..6898ca1 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -729,8 +729,7 @@
struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
struct device *dev = usbhsg_gpriv_to_dev(gpriv);
unsigned long flags;
-
- usbhsg_pipe_disable(uep);
+ int ret = 0;
dev_dbg(dev, "set halt %d (pipe %d)\n",
halt, usbhs_pipe_number(pipe));
@@ -738,6 +737,18 @@
/******************** spin lock ********************/
usbhs_lock(priv, flags);
+ /*
+ * According to usb_ep_set_halt()'s description, this function should
+ * return -EAGAIN if the IN endpoint has any queue or data. Note
+ * that the usbhs_pipe_is_dir_in() returns false if the pipe is an
+ * IN endpoint in the gadget mode.
+ */
+ if (!usbhs_pipe_is_dir_in(pipe) && (__usbhsf_pkt_get(pipe) ||
+ usbhs_pipe_contains_transmittable_data(pipe))) {
+ ret = -EAGAIN;
+ goto out;
+ }
+
if (halt)
usbhs_pipe_stall(pipe);
else
@@ -748,10 +759,11 @@
else
usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE);
+out:
usbhs_unlock(priv, flags);
/******************** spin unlock ******************/
- return 0;
+ return ret;
}
static int usbhsg_ep_set_halt(struct usb_ep *ep, int value)
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index 9396a8c..8db4ca7 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -286,6 +286,21 @@
return -EBUSY;
}
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe)
+{
+ u16 val;
+
+ /* Do not support for DCP pipe */
+ if (usbhs_pipe_is_dcp(pipe))
+ return false;
+
+ val = usbhsp_pipectrl_get(pipe);
+ if (val & INBUFM)
+ return true;
+
+ return false;
+}
+
/*
* PID ctrl
*/
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
index 95185fd..e414470 100644
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -90,6 +90,7 @@
int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe);
void usbhs_pipe_clear(struct usbhs_pipe *pipe);
int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe);
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe);
void usbhs_pipe_enable(struct usbhs_pipe *pipe);
void usbhs_pipe_disable(struct usbhs_pipe *pipe);
void usbhs_pipe_stall(struct usbhs_pipe *pipe);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 63ff1a4..f94d116 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1025,6 +1025,9 @@
/* EZPrototypes devices */
{ USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) },
{ USB_DEVICE_INTERFACE_NUMBER(UNJO_VID, UNJO_ISODEBUG_V1_PID, 1) },
+ /* Sienna devices */
+ { USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) },
+ { USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index ed6b366..2e8161f 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -38,6 +38,9 @@
#define FTDI_LUMEL_PD12_PID 0x6002
+/* Sienna Serial Interface by Secyourit GmbH */
+#define FTDI_SIENNA_PID 0x8348
+
/* Cyber Cortex AV by Fabulous Silicon (http://fabuloussilicon.com) */
#define CYBER_CORTEX_AV_PID 0x8698
@@ -688,6 +691,12 @@
#define BANDB_ZZ_PROG1_USB_PID 0xBA02
/*
+ * Echelon USB Serial Interface
+ */
+#define ECHELON_VID 0x0920
+#define ECHELON_U20_PID 0x7500
+
+/*
* Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
*/
#define INTREPID_VID 0x093C
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 1f9414b..185ef1d 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1250,8 +1250,8 @@
ep_desc = find_ep(serial, endpoint);
if (!ep_desc) {
- /* leak the urb, something's wrong and the callers don't care */
- return urb;
+ usb_free_urb(urb);
+ return NULL;
}
if (usb_endpoint_xfer_int(ep_desc)) {
ep_type_name = "INT";
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 1bceb11..00a6e62 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -421,6 +421,7 @@
#define CINTERION_PRODUCT_PH8_AUDIO 0x0083
#define CINTERION_PRODUCT_AHXX_2RMNET 0x0084
#define CINTERION_PRODUCT_AHXX_AUDIO 0x0085
+#define CINTERION_PRODUCT_CLS8 0x00b0
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -1149,6 +1150,14 @@
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
.driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1050, 0xff), /* Telit FN980 (rmnet) */
+ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1051, 0xff), /* Telit FN980 (MBIM) */
+ .driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1052, 0xff), /* Telit FN980 (RNDIS) */
+ .driver_info = NCTRL(2) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1053, 0xff), /* Telit FN980 (ECM) */
+ .driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
@@ -1842,6 +1851,8 @@
.driver_info = RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) },
{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_CLS8, 0xff),
+ .driver_info = RSVD(0) | RSVD(4) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4a037b4..a894c0f 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -315,10 +315,7 @@
serial = port->serial;
owner = serial->type->driver.owner;
- mutex_lock(&serial->disc_mutex);
- if (!serial->disconnected)
- usb_autopm_put_interface(serial->interface);
- mutex_unlock(&serial->disc_mutex);
+ usb_autopm_put_interface(serial->interface);
usb_serial_put(serial);
module_put(owner);
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 5133a07..f243744 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -63,6 +63,7 @@
spinlock_t err_lock; /* lock for errors */
struct kref kref;
struct mutex io_mutex; /* synchronize I/O with disconnect */
+ unsigned long disconnected:1;
wait_queue_head_t bulk_in_wait; /* to wait for an ongoing read */
};
#define to_skel_dev(d) container_of(d, struct usb_skel, kref)
@@ -75,6 +76,7 @@
struct usb_skel *dev = to_skel_dev(kref);
usb_free_urb(dev->bulk_in_urb);
+ usb_put_intf(dev->interface);
usb_put_dev(dev->udev);
kfree(dev->bulk_in_buffer);
kfree(dev);
@@ -126,10 +128,7 @@
return -ENODEV;
/* allow the device to be autosuspended */
- mutex_lock(&dev->io_mutex);
- if (dev->interface)
- usb_autopm_put_interface(dev->interface);
- mutex_unlock(&dev->io_mutex);
+ usb_autopm_put_interface(dev->interface);
/* decrement the count on our device */
kref_put(&dev->kref, skel_delete);
@@ -241,7 +240,7 @@
if (rv < 0)
return rv;
- if (!dev->interface) { /* disconnect() was called */
+ if (dev->disconnected) { /* disconnect() was called */
rv = -ENODEV;
goto exit;
}
@@ -422,7 +421,7 @@
/* this lock makes sure we don't submit URBs to gone devices */
mutex_lock(&dev->io_mutex);
- if (!dev->interface) { /* disconnect() was called */
+ if (dev->disconnected) { /* disconnect() was called */
mutex_unlock(&dev->io_mutex);
retval = -ENODEV;
goto error;
@@ -509,7 +508,7 @@
init_waitqueue_head(&dev->bulk_in_wait);
dev->udev = usb_get_dev(interface_to_usbdev(interface));
- dev->interface = interface;
+ dev->interface = usb_get_intf(interface);
/* set up the endpoint information */
/* use only the first bulk-in and bulk-out endpoints */
@@ -582,7 +581,7 @@
/* prevent more I/O from starting */
mutex_lock(&dev->io_mutex);
- dev->interface = NULL;
+ dev->disconnected = 1;
mutex_unlock(&dev->io_mutex);
usb_kill_anchored_urbs(&dev->submitted);
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index 5098982..e5c162b 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -58,7 +58,7 @@
#define IMX2_WDT_WMCR 0x08 /* Misc Register */
-#define IMX2_WDT_MAX_TIME 128
+#define IMX2_WDT_MAX_TIME 128U
#define IMX2_WDT_DEFAULT_TIME 60 /* in seconds */
#define WDOG_SEC_TO_COUNT(s) ((s * 2 - 1) << 8)
@@ -183,7 +183,7 @@
{
unsigned int actual;
- actual = min(new_timeout, wdog->max_hw_heartbeat_ms * 1000);
+ actual = min(new_timeout, IMX2_WDT_MAX_TIME);
__imx2_wdt_set_timeout(wdog, actual);
wdog->timeout = new_timeout;
return 0;
diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c
index 7494dbe..db58aaa 100644
--- a/drivers/xen/pci.c
+++ b/drivers/xen/pci.c
@@ -29,6 +29,8 @@
#include "../pci/pci.h"
#ifdef CONFIG_PCI_MMCONFIG
#include <asm/pci_x86.h>
+
+static int xen_mcfg_late(void);
#endif
static bool __read_mostly pci_seg_supported = true;
@@ -40,7 +42,18 @@
#ifdef CONFIG_PCI_IOV
struct pci_dev *physfn = pci_dev->physfn;
#endif
-
+#ifdef CONFIG_PCI_MMCONFIG
+ static bool pci_mcfg_reserved = false;
+ /*
+ * Reserve MCFG areas in Xen on first invocation due to this being
+ * potentially called from inside of acpi_init immediately after
+ * MCFG table has been finally parsed.
+ */
+ if (!pci_mcfg_reserved) {
+ xen_mcfg_late();
+ pci_mcfg_reserved = true;
+ }
+#endif
if (pci_seg_supported) {
struct {
struct physdev_pci_device_add add;
@@ -213,7 +226,7 @@
arch_initcall(register_xen_pci_notifier);
#ifdef CONFIG_PCI_MMCONFIG
-static int __init xen_mcfg_late(void)
+static int xen_mcfg_late(void)
{
struct pci_mmcfg_region *cfg;
int rc;
@@ -252,8 +265,4 @@
}
return 0;
}
-/*
- * Needs to be done after acpi_init which are subsys_initcall.
- */
-subsys_initcall_sync(xen_mcfg_late);
#endif
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 79ff727..e963b83 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -528,6 +528,7 @@
v9inode = V9FS_I(inode);
mutex_lock(&v9inode->v_mutex);
if (!v9inode->writeback_fid &&
+ (vma->vm_flags & VM_SHARED) &&
(vma->vm_flags & VM_WRITE)) {
/*
* clone a fid and add it to writeback_fid
@@ -629,6 +630,8 @@
(vma->vm_end - vma->vm_start - 1),
};
+ if (!(vma->vm_flags & VM_SHARED))
+ return;
p9_debug(P9_DEBUG_VFS, "9p VMA close, %p, flushing", vma);
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 339fdf6..7fcddaa 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -800,7 +800,12 @@
ci->i_version = le64_to_cpu(info->version);
inode->i_version++;
inode->i_rdev = le32_to_cpu(info->rdev);
- inode->i_blkbits = fls(le32_to_cpu(info->layout.fl_stripe_unit)) - 1;
+ /* directories have fl_stripe_unit set to zero */
+ if (le32_to_cpu(info->layout.fl_stripe_unit))
+ inode->i_blkbits =
+ fls(le32_to_cpu(info->layout.fl_stripe_unit)) - 1;
+ else
+ inode->i_blkbits = CEPH_BLOCK_SHIFT;
if ((new_version || (new_issued & CEPH_CAP_AUTH_SHARED)) &&
(issued & CEPH_CAP_AUTH_EXCL) == 0) {
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 67cb9d0..3139fbd 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -3410,7 +3410,9 @@
pr_info("mds%d hung\n", s->s_mds);
}
}
- if (s->s_state < CEPH_MDS_SESSION_OPEN) {
+ if (s->s_state == CEPH_MDS_SESSION_NEW ||
+ s->s_state == CEPH_MDS_SESSION_RESTARTING ||
+ s->s_state == CEPH_MDS_SESSION_REJECTED) {
/* this mds is failed or recovering, just wait */
ceph_put_mds_session(s);
continue;
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index e98e24e..d6475dc 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -830,10 +830,16 @@
static int
cifs_d_revalidate(struct dentry *direntry, unsigned int flags)
{
+ struct inode *inode;
+
if (flags & LOOKUP_RCU)
return -ECHILD;
if (d_really_is_positive(direntry)) {
+ inode = d_inode(direntry);
+ if ((flags & LOOKUP_REVAL) && !CIFS_CACHE_READ(CIFS_I(inode)))
+ CIFS_I(inode)->time = 0; /* force reval */
+
if (cifs_revalidate_dentry(direntry))
return 0;
else {
@@ -844,7 +850,7 @@
* attributes will have been updated by
* cifs_revalidate_dentry().
*/
- if (IS_AUTOMOUNT(d_inode(direntry)) &&
+ if (IS_AUTOMOUNT(inode) &&
!(direntry->d_flags & DCACHE_NEED_AUTOMOUNT)) {
spin_lock(&direntry->d_lock);
direntry->d_flags |= DCACHE_NEED_AUTOMOUNT;
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index df3ee0b..3504ef0 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -252,6 +252,12 @@
rc = cifs_get_inode_info(&inode, full_path, buf, inode->i_sb,
xid, fid);
+ if (rc) {
+ server->ops->close(xid, tcon, fid);
+ if (rc == -ESTALE)
+ rc = -EOPENSTALE;
+ }
+
out:
kfree(buf);
return rc;
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 786f67b..b1c0961 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -405,6 +405,7 @@
/* if uniqueid is different, return error */
if (unlikely(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM &&
CIFS_I(*pinode)->uniqueid != fattr.cf_uniqueid)) {
+ CIFS_I(*pinode)->time = 0; /* force reval */
rc = -ESTALE;
goto cgiiu_exit;
}
@@ -412,6 +413,7 @@
/* if filetype is different, return error */
if (unlikely(((*pinode)->i_mode & S_IFMT) !=
(fattr.cf_mode & S_IFMT))) {
+ CIFS_I(*pinode)->time = 0; /* force reval */
rc = -ESTALE;
goto cgiiu_exit;
}
@@ -917,6 +919,7 @@
/* if uniqueid is different, return error */
if (unlikely(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM &&
CIFS_I(*inode)->uniqueid != fattr.cf_uniqueid)) {
+ CIFS_I(*inode)->time = 0; /* force reval */
rc = -ESTALE;
goto cgii_exit;
}
@@ -924,6 +927,7 @@
/* if filetype is different, return error */
if (unlikely(((*inode)->i_mode & S_IFMT) !=
(fattr.cf_mode & S_IFMT))) {
+ CIFS_I(*inode)->time = 0; /* force reval */
rc = -ESTALE;
goto cgii_exit;
}
diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c
index c5b6b71..d9aba97 100644
--- a/fs/fuse/cuse.c
+++ b/fs/fuse/cuse.c
@@ -513,6 +513,7 @@
rc = cuse_send_init(cc);
if (rc) {
fuse_dev_free(fud);
+ fuse_conn_put(&cc->fc);
return rc;
}
file->private_data = fud;
diff --git a/fs/libfs.c b/fs/libfs.c
index 9588780a..9dc0e1e 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -85,58 +85,47 @@
EXPORT_SYMBOL(dcache_dir_close);
/* parent is locked at least shared */
-static struct dentry *next_positive(struct dentry *parent,
- struct list_head *from,
- int count)
+/*
+ * Returns an element of siblings' list.
+ * We are looking for <count>th positive after <p>; if
+ * found, dentry is grabbed and passed to caller via *<res>.
+ * If no such element exists, the anchor of list is returned
+ * and *<res> is set to NULL.
+ */
+static struct list_head *scan_positives(struct dentry *cursor,
+ struct list_head *p,
+ loff_t count,
+ struct dentry **res)
{
- unsigned *seq = &parent->d_inode->i_dir_seq, n;
- struct dentry *res;
- struct list_head *p;
- bool skipped;
- int i;
+ struct dentry *dentry = cursor->d_parent, *found = NULL;
-retry:
- i = count;
- skipped = false;
- n = smp_load_acquire(seq) & ~1;
- res = NULL;
- rcu_read_lock();
- for (p = from->next; p != &parent->d_subdirs; p = p->next) {
+ spin_lock(&dentry->d_lock);
+ while ((p = p->next) != &dentry->d_subdirs) {
struct dentry *d = list_entry(p, struct dentry, d_child);
- if (!simple_positive(d)) {
- skipped = true;
- } else if (!--i) {
- res = d;
- break;
+ // we must at least skip cursors, to avoid livelocks
+ if (d->d_flags & DCACHE_DENTRY_CURSOR)
+ continue;
+ if (simple_positive(d) && !--count) {
+ spin_lock_nested(&d->d_lock, DENTRY_D_LOCK_NESTED);
+ if (simple_positive(d))
+ found = dget_dlock(d);
+ spin_unlock(&d->d_lock);
+ if (likely(found))
+ break;
+ count = 1;
+ }
+ if (need_resched()) {
+ list_move(&cursor->d_child, p);
+ p = &cursor->d_child;
+ spin_unlock(&dentry->d_lock);
+ cond_resched();
+ spin_lock(&dentry->d_lock);
}
}
- rcu_read_unlock();
- if (skipped) {
- smp_rmb();
- if (unlikely(*seq != n))
- goto retry;
- }
- return res;
-}
-
-static void move_cursor(struct dentry *cursor, struct list_head *after)
-{
- struct dentry *parent = cursor->d_parent;
- unsigned n, *seq = &parent->d_inode->i_dir_seq;
- spin_lock(&parent->d_lock);
- for (;;) {
- n = *seq;
- if (!(n & 1) && cmpxchg(seq, n, n + 1) == n)
- break;
- cpu_relax();
- }
- __list_del(cursor->d_child.prev, cursor->d_child.next);
- if (after)
- list_add(&cursor->d_child, after);
- else
- list_add_tail(&cursor->d_child, &parent->d_subdirs);
- smp_store_release(seq, n + 2);
- spin_unlock(&parent->d_lock);
+ spin_unlock(&dentry->d_lock);
+ dput(*res);
+ *res = found;
+ return p;
}
loff_t dcache_dir_lseek(struct file *file, loff_t offset, int whence)
@@ -152,17 +141,28 @@
return -EINVAL;
}
if (offset != file->f_pos) {
- file->f_pos = offset;
- if (file->f_pos >= 2) {
- struct dentry *cursor = file->private_data;
- struct dentry *to;
- loff_t n = file->f_pos - 2;
+ struct dentry *cursor = file->private_data;
+ struct dentry *to = NULL;
+ struct list_head *p;
- inode_lock_shared(dentry->d_inode);
- to = next_positive(dentry, &dentry->d_subdirs, n);
- move_cursor(cursor, to ? &to->d_child : NULL);
- inode_unlock_shared(dentry->d_inode);
+ file->f_pos = offset;
+ inode_lock_shared(dentry->d_inode);
+
+ if (file->f_pos > 2) {
+ p = scan_positives(cursor, &dentry->d_subdirs,
+ file->f_pos - 2, &to);
+ spin_lock(&dentry->d_lock);
+ list_move(&cursor->d_child, p);
+ spin_unlock(&dentry->d_lock);
+ } else {
+ spin_lock(&dentry->d_lock);
+ list_del_init(&cursor->d_child);
+ spin_unlock(&dentry->d_lock);
}
+
+ dput(to);
+
+ inode_unlock_shared(dentry->d_inode);
}
return offset;
}
@@ -184,25 +184,29 @@
{
struct dentry *dentry = file->f_path.dentry;
struct dentry *cursor = file->private_data;
- struct list_head *p = &cursor->d_child;
- struct dentry *next;
- bool moved = false;
+ struct list_head *anchor = &dentry->d_subdirs;
+ struct dentry *next = NULL;
+ struct list_head *p;
if (!dir_emit_dots(file, ctx))
return 0;
if (ctx->pos == 2)
- p = &dentry->d_subdirs;
- while ((next = next_positive(dentry, p, 1)) != NULL) {
+ p = anchor;
+ else
+ p = &cursor->d_child;
+
+ while ((p = scan_positives(cursor, p, 1, &next)) != anchor) {
if (!dir_emit(ctx, next->d_name.name, next->d_name.len,
d_inode(next)->i_ino, dt_type(d_inode(next))))
break;
- moved = true;
- p = &next->d_child;
ctx->pos++;
}
- if (moved)
- move_cursor(cursor, p);
+ spin_lock(&dentry->d_lock);
+ list_move_tail(&cursor->d_child, p);
+ spin_unlock(&dentry->d_lock);
+ dput(next);
+
return 0;
}
EXPORT_SYMBOL(dcache_readdir);
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 5e2724a..d7f8d5c 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -1123,7 +1123,7 @@
} else
*p++ = cpu_to_be32(NFS4_SET_TO_SERVER_TIME);
}
- if (bmval[2] & FATTR4_WORD2_SECURITY_LABEL) {
+ if (label && (bmval[2] & FATTR4_WORD2_SECURITY_LABEL)) {
*p++ = cpu_to_be32(label->lfs);
*p++ = cpu_to_be32(label->pi);
*p++ = cpu_to_be32(label->len);
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index 67d589e..b16ca13 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -1674,6 +1674,7 @@
out_close_devices:
xfs_close_devices(mp);
out_free_fsname:
+ sb->s_fs_info = NULL;
xfs_free_fsname(mp);
kfree(mp);
out:
@@ -1691,6 +1692,10 @@
{
struct xfs_mount *mp = XFS_M(sb);
+ /* if ->fill_super failed, we have no mount to tear down */
+ if (!sb->s_fs_info)
+ return;
+
xfs_notice(mp, "Unmounting Filesystem");
xfs_filestream_unmount(mp);
xfs_unmountfs(mp);
@@ -1700,6 +1705,8 @@
xfs_destroy_percpu_counters(mp);
xfs_destroy_mount_workqueues(mp);
xfs_close_devices(mp);
+
+ sb->s_fs_info = NULL;
xfs_free_fsname(mp);
kfree(mp);
}
@@ -1719,6 +1726,9 @@
struct super_block *sb,
struct shrink_control *sc)
{
+ /* Paranoia: catch incorrect calls during mount setup or teardown */
+ if (WARN_ON_ONCE(!sb->s_fs_info))
+ return 0;
return xfs_reclaim_inodes_count(XFS_M(sb));
}
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index aa2b4e4..727cfc1 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2651,4 +2651,57 @@
return true;
}
+struct element {
+ u8 id;
+ u8 datalen;
+ u8 data[];
+} __packed;
+
+/* element iteration helpers */
+#define for_each_element(_elem, _data, _datalen) \
+ for (_elem = (const struct element *)(_data); \
+ (const u8 *)(_data) + (_datalen) - (const u8 *)_elem >= \
+ (int)sizeof(*_elem) && \
+ (const u8 *)(_data) + (_datalen) - (const u8 *)_elem >= \
+ (int)sizeof(*_elem) + _elem->datalen; \
+ _elem = (const struct element *)(_elem->data + _elem->datalen))
+
+#define for_each_element_id(element, _id, data, datalen) \
+ for_each_element(element, data, datalen) \
+ if (element->id == (_id))
+
+#define for_each_element_extid(element, extid, data, datalen) \
+ for_each_element(element, data, datalen) \
+ if (element->id == WLAN_EID_EXTENSION && \
+ element->datalen > 0 && \
+ element->data[0] == (extid))
+
+#define for_each_subelement(sub, element) \
+ for_each_element(sub, (element)->data, (element)->datalen)
+
+#define for_each_subelement_id(sub, id, element) \
+ for_each_element_id(sub, id, (element)->data, (element)->datalen)
+
+#define for_each_subelement_extid(sub, extid, element) \
+ for_each_element_extid(sub, extid, (element)->data, (element)->datalen)
+
+/**
+ * for_each_element_completed - determine if element parsing consumed all data
+ * @element: element pointer after for_each_element() or friends
+ * @data: same data pointer as passed to for_each_element() or friends
+ * @datalen: same data length as passed to for_each_element() or friends
+ *
+ * This function returns %true if all the data was parsed or considered
+ * while walking the elements. Only use this if your for_each_element()
+ * loop cannot be broken out of, otherwise it always returns %false.
+ *
+ * If some data was malformed, this returns %false since the last parsed
+ * element will not fill the whole remaining data.
+ */
+static inline bool for_each_element_completed(const struct element *element,
+ const void *data, size_t datalen)
+{
+ return (const u8 *)element == (const u8 *)data + datalen;
+}
+
#endif /* LINUX_IEEE80211_H */
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index f0da77a..b4dd1a0 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -344,6 +344,8 @@
#define SND_SOC_DAPM_WILL_PMD 0x80 /* called at start of sequence */
#define SND_SOC_DAPM_PRE_POST_PMD \
(SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD)
+#define SND_SOC_DAPM_PRE_POST_PMU \
+ (SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU)
/* convenience event type detection */
#define SND_SOC_DAPM_EVENT_ON(e) \
diff --git a/kernel/elfcore.c b/kernel/elfcore.c
index e556751..a2b29b9 100644
--- a/kernel/elfcore.c
+++ b/kernel/elfcore.c
@@ -2,6 +2,7 @@
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/binfmts.h>
+#include <linux/elfcore.h>
Elf_Half __weak elf_core_extra_phdrs(void)
{
diff --git a/kernel/fork.c b/kernel/fork.c
index 42ec3d6..04e239c 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -2513,7 +2513,7 @@
struct ctl_table t;
int ret;
int threads = max_threads;
- int min = MIN_THREADS;
+ int min = 1;
int max = MAX_THREADS;
t = *table;
@@ -2525,7 +2525,7 @@
if (ret || !write)
return ret;
- set_max_threads(threads);
+ max_threads = threads;
return 0;
}
diff --git a/kernel/panic.c b/kernel/panic.c
index bebc117..f9c25b2 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -149,6 +149,7 @@
* after setting panic_cpu) from invoking panic() again.
*/
local_irq_disable();
+ preempt_disable_notrace();
/*
* It's possible to come here directly from a panic-assertion and
diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index 018e2f5..97da924 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -1596,21 +1596,23 @@
static int collect_expired_timers(struct timer_base *base,
struct hlist_head *heads)
{
+ unsigned long now = READ_ONCE(jiffies);
+
/*
* NOHZ optimization. After a long idle sleep we need to forward the
* base to current jiffies. Avoid a loop by searching the bitfield for
* the next expiring timer.
*/
- if ((long)(jiffies - base->clk) > 2) {
+ if ((long)(now - base->clk) > 2) {
unsigned long next = __next_timer_interrupt(base);
/*
* If the next timer is ahead of time forward to current
* jiffies, otherwise forward to the next expiry time:
*/
- if (time_after(next, jiffies)) {
+ if (time_after(next, now)) {
/* The call site will increment clock! */
- base->clk = jiffies - 1;
+ base->clk = now - 1;
return 0;
}
base->clk = next;
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index e9216ed..cf40a5a 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -3773,9 +3773,14 @@
if (tracing_disabled)
return -ENODEV;
+ if (trace_array_get(tr) < 0)
+ return -ENODEV;
+
ret = seq_open(file, &show_traces_seq_ops);
- if (ret)
+ if (ret) {
+ trace_array_put(tr);
return ret;
+ }
m = file->private_data;
m->private = tr;
@@ -3783,6 +3788,14 @@
return 0;
}
+static int show_traces_release(struct inode *inode, struct file *file)
+{
+ struct trace_array *tr = inode->i_private;
+
+ trace_array_put(tr);
+ return seq_release(inode, file);
+}
+
static ssize_t
tracing_write_stub(struct file *filp, const char __user *ubuf,
size_t count, loff_t *ppos)
@@ -3813,8 +3826,8 @@
static const struct file_operations show_traces_fops = {
.open = show_traces_open,
.read = seq_read,
- .release = seq_release,
.llseek = seq_lseek,
+ .release = show_traces_release,
};
static ssize_t
diff --git a/kernel/trace/trace_hwlat.c b/kernel/trace/trace_hwlat.c
index f00b013..5fe23f0 100644
--- a/kernel/trace/trace_hwlat.c
+++ b/kernel/trace/trace_hwlat.c
@@ -151,7 +151,7 @@
if (enter)
nmi_ts_start = time_get();
else
- nmi_total_ts = time_get() - nmi_ts_start;
+ nmi_total_ts += time_get() - nmi_ts_start;
}
if (enter)
@@ -257,6 +257,8 @@
/* Keep a running maximum ever recorded hardware latency */
if (sample > tr->max_latency)
tr->max_latency = sample;
+ if (outer_sample > tr->max_latency)
+ tr->max_latency = outer_sample;
}
out:
diff --git a/mm/usercopy.c b/mm/usercopy.c
index 27ae932..9bc43f8 100644
--- a/mm/usercopy.c
+++ b/mm/usercopy.c
@@ -15,6 +15,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/mm.h>
+#include <linux/highmem.h>
#include <linux/slab.h>
#include <asm/sections.h>
@@ -216,7 +217,12 @@
if (!virt_addr_valid(ptr))
return NULL;
- page = virt_to_head_page(ptr);
+ /*
+ * When CONFIG_HIGHMEM=y, kmap_to_page() will give either the
+ * highmem page or fallback to virt_to_page(). The following
+ * is effectively a highmem-aware virt_to_head_page().
+ */
+ page = compound_head(kmap_to_page((void *)ptr));
/* Check slab allocator for flags and size. */
if (PageSlab(page))
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d9332d1..36cb892 100755
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -213,6 +213,36 @@
return __cfg80211_rdev_from_attrs(netns, info->attrs);
}
+static int validate_beacon_head(const struct nlattr *attr)
+{
+ const u8 *data = nla_data(attr);
+ unsigned int len = nla_len(attr);
+ const struct element *elem;
+ const struct ieee80211_mgmt *mgmt = (void *)data;
+ unsigned int fixedlen = offsetof(struct ieee80211_mgmt,
+ u.beacon.variable);
+
+ if (len < fixedlen)
+ goto err;
+
+ if (ieee80211_hdrlen(mgmt->frame_control) !=
+ offsetof(struct ieee80211_mgmt, u.beacon))
+ goto err;
+
+ data += fixedlen;
+ len -= fixedlen;
+
+ for_each_element(elem, data, len) {
+ /* nothing */
+ }
+
+ if (for_each_element_completed(elem, data, len))
+ return 0;
+
+err:
+ return -EINVAL;
+}
+
/* policy for the attributes */
static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
@@ -2095,6 +2125,8 @@
control_freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);
+ memset(chandef, 0, sizeof(*chandef));
+
chandef->chan = ieee80211_get_channel(&rdev->wiphy, control_freq);
chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
chandef->center_freq1 = control_freq;
@@ -2564,7 +2596,7 @@
if (rdev->ops->get_channel) {
int ret;
- struct cfg80211_chan_def chandef;
+ struct cfg80211_chan_def chandef = {};
ret = rdev_get_channel(rdev, wdev, &chandef);
if (ret == 0) {
@@ -3704,6 +3736,11 @@
memset(bcn, 0, sizeof(*bcn));
if (attrs[NL80211_ATTR_BEACON_HEAD]) {
+ int ret = validate_beacon_head(attrs[NL80211_ATTR_BEACON_HEAD]);
+
+ if (ret)
+ return ret;
+
bcn->head = nla_data(attrs[NL80211_ATTR_BEACON_HEAD]);
bcn->head_len = nla_len(attrs[NL80211_ATTR_BEACON_HEAD]);
if (!bcn->head_len)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 73252d7..54e0793 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1569,7 +1569,7 @@
static bool reg_wdev_chan_valid(struct wiphy *wiphy, struct wireless_dev *wdev)
{
- struct cfg80211_chan_def chandef;
+ struct cfg80211_chan_def chandef = {};
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
enum nl80211_iftype iftype;
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 7ea2eba..4de2c7c 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -407,6 +407,8 @@
const u8 *match, int match_len,
int match_offset)
{
+ const struct element *elem;
+
/* match_offset can't be smaller than 2, unless match_len is
* zero, in which case match_offset must be zero as well.
*/
@@ -414,14 +416,10 @@
(!match_len && match_offset)))
return NULL;
- while (len >= 2 && len >= ies[1] + 2) {
- if ((ies[0] == eid) &&
- (ies[1] + 2 >= match_offset + match_len) &&
- !memcmp(ies + match_offset, match, match_len))
- return ies;
-
- len -= ies[1] + 2;
- ies += ies[1] + 2;
+ for_each_element_id(elem, eid, ies, len) {
+ if (elem->datalen >= match_offset - 2 + match_len &&
+ !memcmp(elem->data + match_offset - 2, match, match_len))
+ return (void *)elem;
}
return NULL;
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index a220156..b3baa34 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -799,7 +799,7 @@
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
- struct cfg80211_chan_def chandef;
+ struct cfg80211_chan_def chandef = {};
int ret;
switch (wdev->iftype) {
diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c
index 20e6629..5155c34 100644
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -298,8 +298,11 @@
rbuf_len = min_t(loff_t, i_size - offset, rbuf_size[active]);
rc = integrity_kernel_read(file, offset, rbuf[active],
rbuf_len);
- if (rc != rbuf_len)
+ if (rc != rbuf_len) {
+ if (rc >= 0)
+ rc = -EINVAL;
goto out3;
+ }
if (rbuf[1] && offset) {
/* Using two buffers, and it is not the first
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index d81ac4e..7406ea5 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -35,6 +35,13 @@
#define SGTL5000_DAP_REG_OFFSET 0x0100
#define SGTL5000_MAX_REG_OFFSET 0x013A
+/* Delay for the VAG ramp up */
+#define SGTL5000_VAG_POWERUP_DELAY 500 /* ms */
+/* Delay for the VAG ramp down */
+#define SGTL5000_VAG_POWERDOWN_DELAY 500 /* ms */
+
+#define SGTL5000_OUTPUTS_MUTE (SGTL5000_HP_MUTE | SGTL5000_LINE_OUT_MUTE)
+
/* default value of sgtl5000 registers */
static const struct reg_default sgtl5000_reg_defaults[] = {
{ SGTL5000_CHIP_DIG_POWER, 0x0000 },
@@ -99,6 +106,13 @@
SGTL5000_MICBIAS_8K = 8,
};
+enum {
+ HP_POWER_EVENT,
+ DAC_POWER_EVENT,
+ ADC_POWER_EVENT,
+ LAST_POWER_EVENT = ADC_POWER_EVENT
+};
+
/* sgtl5000 private structure in codec */
struct sgtl5000_priv {
int sysclk; /* sysclk rate */
@@ -111,8 +125,117 @@
int revision;
u8 micbias_resistor;
u8 micbias_voltage;
+ u16 mute_state[LAST_POWER_EVENT + 1];
};
+static inline int hp_sel_input(struct snd_soc_component *component)
+{
+ unsigned int ana_reg = 0;
+
+ snd_soc_component_read(component, SGTL5000_CHIP_ANA_CTRL, &ana_reg);
+
+ return (ana_reg & SGTL5000_HP_SEL_MASK) >> SGTL5000_HP_SEL_SHIFT;
+}
+
+static inline u16 mute_output(struct snd_soc_component *component,
+ u16 mute_mask)
+{
+ unsigned int mute_reg = 0;
+
+ snd_soc_component_read(component, SGTL5000_CHIP_ANA_CTRL, &mute_reg);
+
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+ mute_mask, mute_mask);
+ return mute_reg;
+}
+
+static inline void restore_output(struct snd_soc_component *component,
+ u16 mute_mask, u16 mute_reg)
+{
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+ mute_mask, mute_reg);
+}
+
+static void vag_power_on(struct snd_soc_component *component, u32 source)
+{
+ unsigned int ana_reg = 0;
+
+ snd_soc_component_read(component, SGTL5000_CHIP_ANA_POWER, &ana_reg);
+
+ if (ana_reg & SGTL5000_VAG_POWERUP)
+ return;
+
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
+
+ /* When VAG powering on to get local loop from Line-In, the sleep
+ * is required to avoid loud pop.
+ */
+ if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN &&
+ source == HP_POWER_EVENT)
+ msleep(SGTL5000_VAG_POWERUP_DELAY);
+}
+
+static int vag_power_consumers(struct snd_soc_component *component,
+ u16 ana_pwr_reg, u32 source)
+{
+ int consumers = 0;
+
+ /* count dac/adc consumers unconditional */
+ if (ana_pwr_reg & SGTL5000_DAC_POWERUP)
+ consumers++;
+ if (ana_pwr_reg & SGTL5000_ADC_POWERUP)
+ consumers++;
+
+ /*
+ * If the event comes from HP and Line-In is selected,
+ * current action is 'DAC to be powered down'.
+ * As HP_POWERUP is not set when HP muxed to line-in,
+ * we need to keep VAG power ON.
+ */
+ if (source == HP_POWER_EVENT) {
+ if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN)
+ consumers++;
+ } else {
+ if (ana_pwr_reg & SGTL5000_HP_POWERUP)
+ consumers++;
+ }
+
+ return consumers;
+}
+
+static void vag_power_off(struct snd_soc_component *component, u32 source)
+{
+ unsigned int ana_pwr = SGTL5000_VAG_POWERUP;
+
+ snd_soc_component_read(component, SGTL5000_CHIP_ANA_POWER, &ana_pwr);
+
+ if (!(ana_pwr & SGTL5000_VAG_POWERUP))
+ return;
+
+ /*
+ * This function calls when any of VAG power consumers is disappearing.
+ * Thus, if there is more than one consumer at the moment, as minimum
+ * one consumer will definitely stay after the end of the current
+ * event.
+ * Don't clear VAG_POWERUP if 2 or more consumers of VAG present:
+ * - LINE_IN (for HP events) / HP (for DAC/ADC events)
+ * - DAC
+ * - ADC
+ * (the current consumer is disappearing right now)
+ */
+ if (vag_power_consumers(component, ana_pwr, source) >= 2)
+ return;
+
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP, 0);
+ /* In power down case, we need wait 400-1000 ms
+ * when VAG fully ramped down.
+ * As longer we wait, as smaller pop we've got.
+ */
+ msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+}
+
/*
* mic_bias power on/off share the same register bits with
* output impedance of mic bias, when power on mic bias, we
@@ -144,36 +267,46 @@
return 0;
}
-/*
- * As manual described, ADC/DAC only works when VAG powerup,
- * So enabled VAG before ADC/DAC up.
- * In power down case, we need wait 400ms when vag fully ramped down.
- */
-static int power_vag_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
+static int vag_and_mute_control(struct snd_soc_component *component,
+ int event, int event_source)
{
- struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
- const u32 mask = SGTL5000_DAC_POWERUP | SGTL5000_ADC_POWERUP;
+ static const u16 mute_mask[] = {
+ /*
+ * Mask for HP_POWER_EVENT.
+ * Muxing Headphones have to be wrapped with mute/unmute
+ * headphones only.
+ */
+ SGTL5000_HP_MUTE,
+ /*
+ * Masks for DAC_POWER_EVENT/ADC_POWER_EVENT.
+ * Muxing DAC or ADC block have to be wrapped with mute/unmute
+ * both headphones and line-out.
+ */
+ SGTL5000_OUTPUTS_MUTE,
+ SGTL5000_OUTPUTS_MUTE
+ };
+
+ struct sgtl5000_priv *sgtl5000 =
+ snd_soc_component_get_drvdata(component);
switch (event) {
- case SND_SOC_DAPM_POST_PMU:
- snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
- SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
- msleep(400);
+ case SND_SOC_DAPM_PRE_PMU:
+ sgtl5000->mute_state[event_source] =
+ mute_output(component, mute_mask[event_source]);
break;
-
+ case SND_SOC_DAPM_POST_PMU:
+ vag_power_on(component, event_source);
+ restore_output(component, mute_mask[event_source],
+ sgtl5000->mute_state[event_source]);
+ break;
case SND_SOC_DAPM_PRE_PMD:
- /*
- * Don't clear VAG_POWERUP, when both DAC and ADC are
- * operational to prevent inadvertently starving the
- * other one of them.
- */
- if ((snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER) &
- mask) != mask) {
- snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
- SGTL5000_VAG_POWERUP, 0);
- msleep(400);
- }
+ sgtl5000->mute_state[event_source] =
+ mute_output(component, mute_mask[event_source]);
+ vag_power_off(component, event_source);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ restore_output(component, mute_mask[event_source],
+ sgtl5000->mute_state[event_source]);
break;
default:
break;
@@ -182,6 +315,41 @@
return 0;
}
+/*
+ * Mute Headphone when power it up/down.
+ * Control VAG power on HP power path.
+ */
+static int headphone_pga_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+
+ return vag_and_mute_control(component, event, HP_POWER_EVENT);
+}
+
+/* As manual describes, ADC/DAC powering up/down requires
+ * to mute outputs to avoid pops.
+ * Control VAG power on ADC/DAC power path.
+ */
+static int adc_updown_depop(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+
+ return vag_and_mute_control(component, event, ADC_POWER_EVENT);
+}
+
+static int dac_updown_depop(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+
+ return vag_and_mute_control(component, event, DAC_POWER_EVENT);
+}
+
/* input sources for ADC */
static const char *adc_mux_text[] = {
"MIC_IN", "LINE_IN"
@@ -217,7 +385,10 @@
mic_bias_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
- SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
+ headphone_pga_event,
+ SND_SOC_DAPM_PRE_POST_PMU |
+ SND_SOC_DAPM_PRE_POST_PMD),
SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
@@ -233,11 +404,12 @@
0, SGTL5000_CHIP_DIG_POWER,
1, 0),
- SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
- SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
-
- SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event),
- SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event),
+ SND_SOC_DAPM_ADC_E("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0,
+ adc_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
+ SND_SOC_DAPM_PRE_POST_PMD),
+ SND_SOC_DAPM_DAC_E("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0,
+ dac_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
+ SND_SOC_DAPM_PRE_POST_PMD),
};
/* routes for sgtl5000 */
diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index def6112..62f4cac 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -267,10 +267,10 @@
errno = ENOMEM;
return -1;
}
+ pevent->cmdlines = cmdlines;
cmdlines[pevent->cmdline_count].comm = strdup(comm);
if (!cmdlines[pevent->cmdline_count].comm) {
- free(cmdlines);
errno = ENOMEM;
return -1;
}
@@ -281,7 +281,6 @@
pevent->cmdline_count++;
qsort(cmdlines, pevent->cmdline_count, sizeof(*cmdlines), cmdline_cmp);
- pevent->cmdlines = cmdlines;
return 0;
}
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 43d5f35..5cb58f3 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -2564,8 +2564,11 @@
fprintf(output, "[ perf stat: executing run #%d ... ]\n",
run_idx + 1);
+ if (run_idx != 0)
+ perf_evlist__reset_prev_raw_counts(evsel_list);
+
status = run_perf_stat(argc, argv);
- if (forever && status != -1) {
+ if (forever && status != -1 && !interval) {
print_counters(NULL, argc, argv);
perf_stat__reset_stats();
}
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 258b19b..b3d947b 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -949,7 +949,7 @@
scnprintf(file, PATH_MAX, "%s/shared_cpu_list", path);
if (sysfs__read_str(file, &cache->map, &len)) {
- free(cache->map);
+ free(cache->size);
free(cache->type);
return -1;
}
diff --git a/tools/perf/util/jitdump.c b/tools/perf/util/jitdump.c
index 95f0884..7e2e8aa 100644
--- a/tools/perf/util/jitdump.c
+++ b/tools/perf/util/jitdump.c
@@ -369,7 +369,7 @@
size_t size;
u16 idr_size;
const char *sym;
- uint32_t count;
+ uint64_t count;
int ret, csize;
pid_t pid, tid;
struct {
@@ -391,7 +391,7 @@
return -1;
filename = event->mmap2.filename;
- size = snprintf(filename, PATH_MAX, "%s/jitted-%d-%u.so",
+ size = snprintf(filename, PATH_MAX, "%s/jitted-%d-%" PRIu64 ".so",
jd->dir,
pid,
count);
@@ -493,7 +493,7 @@
return -1;
filename = event->mmap2.filename;
- size = snprintf(filename, PATH_MAX, "%s/jitted-%d-%"PRIu64,
+ size = snprintf(filename, PATH_MAX, "%s/jitted-%d-%" PRIu64 ".so",
jd->dir,
pid,
jr->move.code_index);
diff --git a/tools/perf/util/llvm-utils.c b/tools/perf/util/llvm-utils.c
index 621f652..4887dd5 100644
--- a/tools/perf/util/llvm-utils.c
+++ b/tools/perf/util/llvm-utils.c
@@ -220,14 +220,14 @@
const char *prefix_dir = "";
const char *suffix_dir = "";
+ /* _UTSNAME_LENGTH is 65 */
+ char release[128];
+
char *autoconf_path;
int err;
if (!test_dir) {
- /* _UTSNAME_LENGTH is 65 */
- char release[128];
-
err = fetch_kernel_version(NULL, release,
sizeof(release));
if (err)
diff --git a/tools/perf/util/stat.c b/tools/perf/util/stat.c
index 39345c2d..d4f872f 100644
--- a/tools/perf/util/stat.c
+++ b/tools/perf/util/stat.c
@@ -145,6 +145,15 @@
evsel->prev_raw_counts = NULL;
}
+static void perf_evsel__reset_prev_raw_counts(struct perf_evsel *evsel)
+{
+ if (evsel->prev_raw_counts) {
+ evsel->prev_raw_counts->aggr.val = 0;
+ evsel->prev_raw_counts->aggr.ena = 0;
+ evsel->prev_raw_counts->aggr.run = 0;
+ }
+}
+
static int perf_evsel__alloc_stats(struct perf_evsel *evsel, bool alloc_raw)
{
int ncpus = perf_evsel__nr_cpus(evsel);
@@ -195,6 +204,14 @@
}
}
+void perf_evlist__reset_prev_raw_counts(struct perf_evlist *evlist)
+{
+ struct perf_evsel *evsel;
+
+ evlist__for_each_entry(evlist, evsel)
+ perf_evsel__reset_prev_raw_counts(evsel);
+}
+
static void zero_per_pkg(struct perf_evsel *counter)
{
if (counter->per_pkg_mask)
diff --git a/tools/perf/util/stat.h b/tools/perf/util/stat.h
index c29bb94..b8845ac 100644
--- a/tools/perf/util/stat.h
+++ b/tools/perf/util/stat.h
@@ -94,6 +94,7 @@
int perf_evlist__alloc_stats(struct perf_evlist *evlist, bool alloc_raw);
void perf_evlist__free_stats(struct perf_evlist *evlist);
void perf_evlist__reset_stats(struct perf_evlist *evlist);
+void perf_evlist__reset_prev_raw_counts(struct perf_evlist *evlist);
int perf_stat_process_counter(struct perf_stat_config *config,
struct perf_evsel *counter);