i2c-algo-pca: Use timeout for checking the state machine
We now timeout also if the state machine does not change within the
given time. For that, the driver-specific completion-functions are
extended to return true or false depending on the timeout. This then
gets checked in the algorithm.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 9e134fa..f68e5f8 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -60,14 +60,14 @@
*
* returns after the start condition has occurred
*/
-static void pca_start(struct i2c_algo_pca_data *adap)
+static int pca_start(struct i2c_algo_pca_data *adap)
{
int sta = pca_get_con(adap);
DEB2("=== START\n");
sta |= I2C_PCA_CON_STA;
sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_SI);
pca_set_con(adap, sta);
- pca_wait(adap);
+ return pca_wait(adap);
}
/*
@@ -75,14 +75,14 @@
*
* return after the repeated start condition has occurred
*/
-static void pca_repeated_start(struct i2c_algo_pca_data *adap)
+static int pca_repeated_start(struct i2c_algo_pca_data *adap)
{
int sta = pca_get_con(adap);
DEB2("=== REPEATED START\n");
sta |= I2C_PCA_CON_STA;
sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_SI);
pca_set_con(adap, sta);
- pca_wait(adap);
+ return pca_wait(adap);
}
/*
@@ -108,7 +108,7 @@
*
* returns after the address has been sent
*/
-static void pca_address(struct i2c_algo_pca_data *adap,
+static int pca_address(struct i2c_algo_pca_data *adap,
struct i2c_msg *msg)
{
int sta = pca_get_con(adap);
@@ -125,7 +125,7 @@
sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI);
pca_set_con(adap, sta);
- pca_wait(adap);
+ return pca_wait(adap);
}
/*
@@ -133,7 +133,7 @@
*
* Returns after the byte has been transmitted
*/
-static void pca_tx_byte(struct i2c_algo_pca_data *adap,
+static int pca_tx_byte(struct i2c_algo_pca_data *adap,
__u8 b)
{
int sta = pca_get_con(adap);
@@ -143,7 +143,7 @@
sta &= ~(I2C_PCA_CON_STO|I2C_PCA_CON_STA|I2C_PCA_CON_SI);
pca_set_con(adap, sta);
- pca_wait(adap);
+ return pca_wait(adap);
}
/*
@@ -163,7 +163,7 @@
*
* Returns after next byte has arrived.
*/
-static void pca_rx_ack(struct i2c_algo_pca_data *adap,
+static int pca_rx_ack(struct i2c_algo_pca_data *adap,
int ack)
{
int sta = pca_get_con(adap);
@@ -174,7 +174,7 @@
sta |= I2C_PCA_CON_AA;
pca_set_con(adap, sta);
- pca_wait(adap);
+ return pca_wait(adap);
}
static int pca_xfer(struct i2c_adapter *i2c_adap,
@@ -187,6 +187,7 @@
int numbytes = 0;
int state;
int ret;
+ int completed = 1;
unsigned long timeout = jiffies + i2c_adap->timeout;
while (pca_status(adap) != 0xf8) {
@@ -232,18 +233,19 @@
switch (state) {
case 0xf8: /* On reset or stop the bus is idle */
- pca_start(adap);
+ completed = pca_start(adap);
break;
case 0x08: /* A START condition has been transmitted */
case 0x10: /* A repeated start condition has been transmitted */
- pca_address(adap, msg);
+ completed = pca_address(adap, msg);
break;
case 0x18: /* SLA+W has been transmitted; ACK has been received */
case 0x28: /* Data byte in I2CDAT has been transmitted; ACK has been received */
if (numbytes < msg->len) {
- pca_tx_byte(adap, msg->buf[numbytes]);
+ completed = pca_tx_byte(adap,
+ msg->buf[numbytes]);
numbytes++;
break;
}
@@ -251,7 +253,7 @@
if (curmsg == num)
pca_stop(adap);
else
- pca_repeated_start(adap);
+ completed = pca_repeated_start(adap);
break;
case 0x20: /* SLA+W has been transmitted; NOT ACK has been received */
@@ -260,21 +262,22 @@
goto out;
case 0x40: /* SLA+R has been transmitted; ACK has been received */
- pca_rx_ack(adap, msg->len > 1);
+ completed = pca_rx_ack(adap, msg->len > 1);
break;
case 0x50: /* Data bytes has been received; ACK has been returned */
if (numbytes < msg->len) {
pca_rx_byte(adap, &msg->buf[numbytes], 1);
numbytes++;
- pca_rx_ack(adap, numbytes < msg->len - 1);
+ completed = pca_rx_ack(adap,
+ numbytes < msg->len - 1);
break;
}
curmsg++; numbytes = 0;
if (curmsg == num)
pca_stop(adap);
else
- pca_repeated_start(adap);
+ completed = pca_repeated_start(adap);
break;
case 0x48: /* SLA+R has been transmitted; NOT ACK has been received */
@@ -297,7 +300,7 @@
if (curmsg == num)
pca_stop(adap);
else
- pca_repeated_start(adap);
+ completed = pca_repeated_start(adap);
} else {
DEB2("NOT ACK sent after data byte received. "
"Not final byte. numbytes %d. len %d\n",
@@ -323,6 +326,8 @@
break;
}
+ if (!completed)
+ goto out;
}
ret = curmsg;