ARM: 8244/1: fbdev: sa1100fb: make use of device clock
Use per-device clock (instead of calling cpufreq_get(0), which can
return 0 if no cpu frequency driver is selected) to program timings.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/drivers/video/fbdev/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
index 9690216..c0abe27 100644
--- a/drivers/video/fbdev/sa1100fb.c
+++ b/drivers/video/fbdev/sa1100fb.c
@@ -178,6 +178,7 @@
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
#include <linux/io.h>
+#include <linux/clk.h>
#include <video/sa1100fb.h>
@@ -416,9 +417,9 @@
var->transp.offset);
#ifdef CONFIG_CPU_FREQ
- dev_dbg(fbi->dev, "dma period = %d ps, clock = %d kHz\n",
+ dev_dbg(fbi->dev, "dma period = %d ps, clock = %ld kHz\n",
sa1100fb_display_dma_period(var),
- cpufreq_get(smp_processor_id()));
+ clk_get_rate(fbi->clk) / 1000);
#endif
return 0;
@@ -592,9 +593,10 @@
* Calculate the PCD value from the clock rate (in picoseconds).
* We take account of the PPCR clock setting.
*/
-static inline unsigned int get_pcd(unsigned int pixclock, unsigned int cpuclock)
+static inline unsigned int get_pcd(struct sa1100fb_info *fbi,
+ unsigned int pixclock)
{
- unsigned int pcd = cpuclock / 100;
+ unsigned int pcd = clk_get_rate(fbi->clk) / 100 / 1000;
pcd *= pixclock;
pcd /= 10000000;
@@ -673,7 +675,7 @@
LCCR2_BegFrmDel(var->upper_margin) +
LCCR2_EndFrmDel(var->lower_margin);
- pcd = get_pcd(var->pixclock, cpufreq_get(0));
+ pcd = get_pcd(fbi, var->pixclock);
new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->inf->lccr3 |
(var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
(var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
@@ -787,6 +789,9 @@
fbi->palette_cpu[0] &= 0xcfff;
fbi->palette_cpu[0] |= palette_pbs(&fbi->fb.var);
+ /* enable LCD controller clock */
+ clk_prepare_enable(fbi->clk);
+
/* Sequence from 11.7.10 */
writel_relaxed(fbi->reg_lccr3, fbi->base + LCCR3);
writel_relaxed(fbi->reg_lccr2, fbi->base + LCCR2);
@@ -831,6 +836,9 @@
schedule_timeout(20 * HZ / 1000);
remove_wait_queue(&fbi->ctrlr_wait, &wait);
+
+ /* disable LCD controller clock */
+ clk_disable_unprepare(fbi->clk);
}
/*
@@ -1009,7 +1017,6 @@
void *data)
{
struct sa1100fb_info *fbi = TO_INF(nb, freq_transition);
- struct cpufreq_freqs *f = data;
u_int pcd;
switch (val) {
@@ -1018,7 +1025,7 @@
break;
case CPUFREQ_POSTCHANGE:
- pcd = get_pcd(fbi->fb.var.pixclock, f->new);
+ pcd = get_pcd(fbi, fbi->fb.var.pixclock);
fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
break;
@@ -1225,6 +1232,13 @@
if (!fbi)
goto failed;
+ fbi->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(fbi->clk)) {
+ ret = PTR_ERR(fbi->clk);
+ fbi->clk = NULL;
+ goto failed;
+ }
+
fbi->base = ioremap(res->start, resource_size(res));
if (!fbi->base)
goto failed;
@@ -1277,6 +1291,8 @@
failed:
if (fbi)
iounmap(fbi->base);
+ if (fbi->clk)
+ clk_put(fbi->clk);
kfree(fbi);
release_mem_region(res->start, resource_size(res));
return ret;