| /* |
| * linux/arch/arm/mach-omap2/clock24xx.h |
| * |
| * Copyright (C) 2005-2008 Texas Instruments, Inc. |
| * Copyright (C) 2004-2008 Nokia Corporation |
| * |
| * Contacts: |
| * Richard Woodruff <r-woodruff2@ti.com> |
| * Paul Walmsley |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H |
| #define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H |
| |
| #include "clock.h" |
| |
| #include "prm.h" |
| #include "cm.h" |
| #include "prm-regbits-24xx.h" |
| #include "cm-regbits-24xx.h" |
| #include "sdrc.h" |
| |
| /* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */ |
| #ifdef CONFIG_ARCH_OMAP2420 |
| #define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL |
| #define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL |
| #else |
| #define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL |
| #define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL |
| #endif |
| |
| static unsigned long omap2_table_mpu_recalc(struct clk *clk); |
| static int omap2_select_table_rate(struct clk *clk, unsigned long rate); |
| static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); |
| static unsigned long omap2_sys_clk_recalc(struct clk *clk); |
| static unsigned long omap2_osc_clk_recalc(struct clk *clk); |
| static unsigned long omap2_sys_clk_recalc(struct clk *clk); |
| static unsigned long omap2_dpllcore_recalc(struct clk *clk); |
| static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); |
| |
| /* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. |
| * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP |
| * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM |
| */ |
| struct prcm_config { |
| unsigned long xtal_speed; /* crystal rate */ |
| unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ |
| unsigned long mpu_speed; /* speed of MPU */ |
| unsigned long cm_clksel_mpu; /* mpu divider */ |
| unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ |
| unsigned long cm_clksel_gfx; /* gfx dividers */ |
| unsigned long cm_clksel1_core; /* major subsystem dividers */ |
| unsigned long cm_clksel1_pll; /* m,n */ |
| unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ |
| unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ |
| unsigned long base_sdrc_rfr; /* base refresh timing for a set */ |
| unsigned char flags; |
| }; |
| |
| /* |
| * The OMAP2 processor can be run at several discrete 'PRCM configurations'. |
| * These configurations are characterized by voltage and speed for clocks. |
| * The device is only validated for certain combinations. One way to express |
| * these combinations is via the 'ratio's' which the clocks operate with |
| * respect to each other. These ratio sets are for a given voltage/DPLL |
| * setting. All configurations can be described by a DPLL setting and a ratio |
| * There are 3 ratio sets for the 2430 and X ratio sets for 2420. |
| * |
| * 2430 differs from 2420 in that there are no more phase synchronizers used. |
| * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs |
| * 2430 (iva2.1, NOdsp, mdm) |
| */ |
| |
| /* Core fields for cm_clksel, not ratio governed */ |
| #define RX_CLKSEL_DSS1 (0x10 << 8) |
| #define RX_CLKSEL_DSS2 (0x0 << 13) |
| #define RX_CLKSEL_SSI (0x5 << 20) |
| |
| /*------------------------------------------------------------------------- |
| * Voltage/DPLL ratios |
| *-------------------------------------------------------------------------*/ |
| |
| /* 2430 Ratio's, 2430-Ratio Config 1 */ |
| #define R1_CLKSEL_L3 (4 << 0) |
| #define R1_CLKSEL_L4 (2 << 5) |
| #define R1_CLKSEL_USB (4 << 25) |
| #define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \ |
| RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ |
| R1_CLKSEL_L4 | R1_CLKSEL_L3 |
| #define R1_CLKSEL_MPU (2 << 0) |
| #define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU |
| #define R1_CLKSEL_DSP (2 << 0) |
| #define R1_CLKSEL_DSP_IF (2 << 5) |
| #define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF |
| #define R1_CLKSEL_GFX (2 << 0) |
| #define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX |
| #define R1_CLKSEL_MDM (4 << 0) |
| #define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM |
| |
| /* 2430-Ratio Config 2 */ |
| #define R2_CLKSEL_L3 (6 << 0) |
| #define R2_CLKSEL_L4 (2 << 5) |
| #define R2_CLKSEL_USB (2 << 25) |
| #define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \ |
| RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ |
| R2_CLKSEL_L4 | R2_CLKSEL_L3 |
| #define R2_CLKSEL_MPU (2 << 0) |
| #define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU |
| #define R2_CLKSEL_DSP (2 << 0) |
| #define R2_CLKSEL_DSP_IF (3 << 5) |
| #define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF |
| #define R2_CLKSEL_GFX (2 << 0) |
| #define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX |
| #define R2_CLKSEL_MDM (6 << 0) |
| #define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM |
| |
| /* 2430-Ratio Bootm (BYPASS) */ |
| #define RB_CLKSEL_L3 (1 << 0) |
| #define RB_CLKSEL_L4 (1 << 5) |
| #define RB_CLKSEL_USB (1 << 25) |
| #define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \ |
| RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ |
| RB_CLKSEL_L4 | RB_CLKSEL_L3 |
| #define RB_CLKSEL_MPU (1 << 0) |
| #define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU |
| #define RB_CLKSEL_DSP (1 << 0) |
| #define RB_CLKSEL_DSP_IF (1 << 5) |
| #define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF |
| #define RB_CLKSEL_GFX (1 << 0) |
| #define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX |
| #define RB_CLKSEL_MDM (1 << 0) |
| #define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM |
| |
| /* 2420 Ratio Equivalents */ |
| #define RXX_CLKSEL_VLYNQ (0x12 << 15) |
| #define RXX_CLKSEL_SSI (0x8 << 20) |
| |
| /* 2420-PRCM III 532MHz core */ |
| #define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ |
| #define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ |
| #define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ |
| #define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ |
| RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ |
| RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ |
| RIII_CLKSEL_L3 |
| #define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ |
| #define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU |
| #define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ |
| #define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ |
| #define RIII_SYNC_DSP (1 << 7) /* Enable sync */ |
| #define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ |
| #define RIII_SYNC_IVA (1 << 13) /* Enable sync */ |
| #define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ |
| RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ |
| RIII_CLKSEL_DSP |
| #define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ |
| #define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX |
| |
| /* 2420-PRCM II 600MHz core */ |
| #define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ |
| #define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ |
| #define RII_CLKSEL_USB (2 << 25) /* 50MHz */ |
| #define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \ |
| RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ |
| RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ |
| RII_CLKSEL_L4 | RII_CLKSEL_L3 |
| #define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ |
| #define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU |
| #define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ |
| #define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ |
| #define RII_SYNC_DSP (0 << 7) /* Bypass sync */ |
| #define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */ |
| #define RII_SYNC_IVA (0 << 13) /* Bypass sync */ |
| #define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \ |
| RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ |
| RII_CLKSEL_DSP |
| #define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ |
| #define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX |
| |
| /* 2420-PRCM I 660MHz core */ |
| #define RI_CLKSEL_L3 (4 << 0) /* 165MHz */ |
| #define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */ |
| #define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */ |
| #define RI_CM_CLKSEL1_CORE_VAL RI_CLKSEL_USB | \ |
| RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ |
| RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ |
| RI_CLKSEL_L4 | RI_CLKSEL_L3 |
| #define RI_CLKSEL_MPU (2 << 0) /* 330MHz */ |
| #define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU |
| #define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */ |
| #define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */ |
| #define RI_SYNC_DSP (1 << 7) /* Activate sync */ |
| #define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */ |
| #define RI_SYNC_IVA (0 << 13) /* Bypass sync */ |
| #define RI_CM_CLKSEL_DSP_VAL RI_SYNC_IVA | RI_CLKSEL_IVA | \ |
| RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \ |
| RI_CLKSEL_DSP |
| #define RI_CLKSEL_GFX (1 << 0) /* 165MHz */ |
| #define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX |
| |
| /* 2420-PRCM VII (boot) */ |
| #define RVII_CLKSEL_L3 (1 << 0) |
| #define RVII_CLKSEL_L4 (1 << 5) |
| #define RVII_CLKSEL_DSS1 (1 << 8) |
| #define RVII_CLKSEL_DSS2 (0 << 13) |
| #define RVII_CLKSEL_VLYNQ (1 << 15) |
| #define RVII_CLKSEL_SSI (1 << 20) |
| #define RVII_CLKSEL_USB (1 << 25) |
| |
| #define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ |
| RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \ |
| RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3 |
| |
| #define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ |
| #define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU |
| |
| #define RVII_CLKSEL_DSP (1 << 0) |
| #define RVII_CLKSEL_DSP_IF (1 << 5) |
| #define RVII_SYNC_DSP (0 << 7) |
| #define RVII_CLKSEL_IVA (1 << 8) |
| #define RVII_SYNC_IVA (0 << 13) |
| #define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \ |
| RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP |
| |
| #define RVII_CLKSEL_GFX (1 << 0) |
| #define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX |
| |
| /*------------------------------------------------------------------------- |
| * 2430 Target modes: Along with each configuration the CPU has several |
| * modes which goes along with them. Modes mainly are the addition of |
| * describe DPLL combinations to go along with a ratio. |
| *-------------------------------------------------------------------------*/ |
| |
| /* Hardware governed */ |
| #define MX_48M_SRC (0 << 3) |
| #define MX_54M_SRC (0 << 5) |
| #define MX_APLLS_CLIKIN_12 (3 << 23) |
| #define MX_APLLS_CLIKIN_13 (2 << 23) |
| #define MX_APLLS_CLIKIN_19_2 (0 << 23) |
| |
| /* |
| * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed |
| * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz |
| */ |
| #define M5A_DPLL_MULT_12 (133 << 12) |
| #define M5A_DPLL_DIV_12 (5 << 8) |
| #define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ |
| MX_APLLS_CLIKIN_12 |
| #define M5A_DPLL_MULT_13 (61 << 12) |
| #define M5A_DPLL_DIV_13 (2 << 8) |
| #define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ |
| MX_APLLS_CLIKIN_13 |
| #define M5A_DPLL_MULT_19 (55 << 12) |
| #define M5A_DPLL_DIV_19 (3 << 8) |
| #define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ |
| MX_APLLS_CLIKIN_19_2 |
| /* #5b (ratio1) target DPLL = 200*2 = 400MHz */ |
| #define M5B_DPLL_MULT_12 (50 << 12) |
| #define M5B_DPLL_DIV_12 (2 << 8) |
| #define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ |
| MX_APLLS_CLIKIN_12 |
| #define M5B_DPLL_MULT_13 (200 << 12) |
| #define M5B_DPLL_DIV_13 (12 << 8) |
| |
| #define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ |
| MX_APLLS_CLIKIN_13 |
| #define M5B_DPLL_MULT_19 (125 << 12) |
| #define M5B_DPLL_DIV_19 (31 << 8) |
| #define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ |
| MX_APLLS_CLIKIN_19_2 |
| /* |
| * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz |
| */ |
| #define M4_DPLL_MULT_12 (133 << 12) |
| #define M4_DPLL_DIV_12 (3 << 8) |
| #define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \ |
| MX_APLLS_CLIKIN_12 |
| |
| #define M4_DPLL_MULT_13 (399 << 12) |
| #define M4_DPLL_DIV_13 (12 << 8) |
| #define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \ |
| MX_APLLS_CLIKIN_13 |
| |
| #define M4_DPLL_MULT_19 (145 << 12) |
| #define M4_DPLL_DIV_19 (6 << 8) |
| #define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \ |
| MX_APLLS_CLIKIN_19_2 |
| |
| /* |
| * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz |
| */ |
| #define M3_DPLL_MULT_12 (55 << 12) |
| #define M3_DPLL_DIV_12 (1 << 8) |
| #define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ |
| MX_APLLS_CLIKIN_12 |
| #define M3_DPLL_MULT_13 (76 << 12) |
| #define M3_DPLL_DIV_13 (2 << 8) |
| #define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ |
| MX_APLLS_CLIKIN_13 |
| #define M3_DPLL_MULT_19 (17 << 12) |
| #define M3_DPLL_DIV_19 (0 << 8) |
| #define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ |
| MX_APLLS_CLIKIN_19_2 |
| |
| /* |
| * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz |
| */ |
| #define M2_DPLL_MULT_12 (55 << 12) |
| #define M2_DPLL_DIV_12 (1 << 8) |
| #define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \ |
| MX_APLLS_CLIKIN_12 |
| |
| /* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, |
| * relock time issue */ |
| /* Core frequency changed from 330/165 to 329/164 MHz*/ |
| #define M2_DPLL_MULT_13 (76 << 12) |
| #define M2_DPLL_DIV_13 (2 << 8) |
| #define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \ |
| MX_APLLS_CLIKIN_13 |
| |
| #define M2_DPLL_MULT_19 (17 << 12) |
| #define M2_DPLL_DIV_19 (0 << 8) |
| #define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ |
| M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \ |
| MX_APLLS_CLIKIN_19_2 |
| |
| /* boot (boot) */ |
| #define MB_DPLL_MULT (1 << 12) |
| #define MB_DPLL_DIV (0 << 8) |
| #define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ |
| MB_DPLL_MULT | MX_APLLS_CLIKIN_12 |
| |
| #define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ |
| MB_DPLL_MULT | MX_APLLS_CLIKIN_13 |
| |
| #define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ |
| MB_DPLL_MULT | MX_APLLS_CLIKIN_19 |
| |
| /* |
| * 2430 - chassis (sedna) |
| * 165 (ratio1) same as above #2 |
| * 150 (ratio1) |
| * 133 (ratio2) same as above #4 |
| * 110 (ratio2) same as above #3 |
| * 104 (ratio2) |
| * boot (boot) |
| */ |
| |
| /* PRCM I target DPLL = 2*330MHz = 660MHz */ |
| #define MI_DPLL_MULT_12 (55 << 12) |
| #define MI_DPLL_DIV_12 (1 << 8) |
| #define MI_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ |
| MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \ |
| MX_APLLS_CLIKIN_12 |
| |
| /* |
| * 2420 Equivalent - mode registers |
| * PRCM II , target DPLL = 2*300MHz = 600MHz |
| */ |
| #define MII_DPLL_MULT_12 (50 << 12) |
| #define MII_DPLL_DIV_12 (1 << 8) |
| #define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ |
| MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ |
| MX_APLLS_CLIKIN_12 |
| #define MII_DPLL_MULT_13 (300 << 12) |
| #define MII_DPLL_DIV_13 (12 << 8) |
| #define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ |
| MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ |
| MX_APLLS_CLIKIN_13 |
| |
| /* PRCM III target DPLL = 2*266 = 532MHz*/ |
| #define MIII_DPLL_MULT_12 (133 << 12) |
| #define MIII_DPLL_DIV_12 (5 << 8) |
| #define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ |
| MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \ |
| MX_APLLS_CLIKIN_12 |
| #define MIII_DPLL_MULT_13 (266 << 12) |
| #define MIII_DPLL_DIV_13 (12 << 8) |
| #define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ |
| MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \ |
| MX_APLLS_CLIKIN_13 |
| |
| /* PRCM VII (boot bypass) */ |
| #define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL |
| #define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL |
| |
| /* High and low operation value */ |
| #define MX_CLKSEL2_PLL_2x_VAL (2 << 0) |
| #define MX_CLKSEL2_PLL_1x_VAL (1 << 0) |
| |
| /* MPU speed defines */ |
| #define S12M 12000000 |
| #define S13M 13000000 |
| #define S19M 19200000 |
| #define S26M 26000000 |
| #define S100M 100000000 |
| #define S133M 133000000 |
| #define S150M 150000000 |
| #define S164M 164000000 |
| #define S165M 165000000 |
| #define S199M 199000000 |
| #define S200M 200000000 |
| #define S266M 266000000 |
| #define S300M 300000000 |
| #define S329M 329000000 |
| #define S330M 330000000 |
| #define S399M 399000000 |
| #define S400M 400000000 |
| #define S532M 532000000 |
| #define S600M 600000000 |
| #define S658M 658000000 |
| #define S660M 660000000 |
| #define S798M 798000000 |
| |
| /*------------------------------------------------------------------------- |
| * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. |
| * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, |
| * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, |
| * CM_CLKSEL2_PLL, CM_CLKSEL_MDM |
| * |
| * Filling in table based on H4 boards and 2430-SDPs variants available. |
| * There are quite a few more rates combinations which could be defined. |
| * |
| * When multiple values are defined the start up will try and choose the |
| * fastest one. If a 'fast' value is defined, then automatically, the /2 |
| * one should be included as it can be used. Generally having more that |
| * one fast set does not make sense, as static timings need to be changed |
| * to change the set. The exception is the bypass setting which is |
| * availble for low power bypass. |
| * |
| * Note: This table needs to be sorted, fastest to slowest. |
| *-------------------------------------------------------------------------*/ |
| static struct prcm_config rate_table[] = { |
| /* PRCM I - FAST */ |
| {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ |
| RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL, |
| RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz, |
| RATE_IN_242X}, |
| |
| /* PRCM II - FAST */ |
| {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ |
| RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, |
| RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, |
| RATE_IN_242X}, |
| |
| {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ |
| RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, |
| RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, |
| RATE_IN_242X}, |
| |
| /* PRCM III - FAST */ |
| {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ |
| RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, |
| RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, |
| RATE_IN_242X}, |
| |
| {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ |
| RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, |
| RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, |
| RATE_IN_242X}, |
| |
| /* PRCM II - SLOW */ |
| {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ |
| RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, |
| RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, |
| RATE_IN_242X}, |
| |
| {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ |
| RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, |
| RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, |
| RATE_IN_242X}, |
| |
| /* PRCM III - SLOW */ |
| {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ |
| RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, |
| RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, |
| RATE_IN_242X}, |
| |
| {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ |
| RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, |
| RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, |
| RATE_IN_242X}, |
| |
| /* PRCM-VII (boot-bypass) */ |
| {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ |
| RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, |
| RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, |
| RATE_IN_242X}, |
| |
| /* PRCM-VII (boot-bypass) */ |
| {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ |
| RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, |
| RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, |
| RATE_IN_242X}, |
| |
| /* PRCM #4 - ratio2 (ES2.1) - FAST */ |
| {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ |
| R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, |
| R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, |
| SDRC_RFR_CTRL_133MHz, |
| RATE_IN_243X}, |
| |
| /* PRCM #2 - ratio1 (ES2) - FAST */ |
| {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ |
| R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, |
| R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, |
| SDRC_RFR_CTRL_165MHz, |
| RATE_IN_243X}, |
| |
| /* PRCM #5a - ratio1 - FAST */ |
| {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ |
| R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, |
| R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, |
| SDRC_RFR_CTRL_133MHz, |
| RATE_IN_243X}, |
| |
| /* PRCM #5b - ratio1 - FAST */ |
| {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ |
| R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, |
| R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, |
| SDRC_RFR_CTRL_100MHz, |
| RATE_IN_243X}, |
| |
| /* PRCM #4 - ratio1 (ES2.1) - SLOW */ |
| {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ |
| R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, |
| R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, |
| SDRC_RFR_CTRL_133MHz, |
| RATE_IN_243X}, |
| |
| /* PRCM #2 - ratio1 (ES2) - SLOW */ |
| {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ |
| R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, |
| R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, |
| SDRC_RFR_CTRL_165MHz, |
| RATE_IN_243X}, |
| |
| /* PRCM #5a - ratio1 - SLOW */ |
| {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ |
| R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, |
| R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, |
| SDRC_RFR_CTRL_133MHz, |
| RATE_IN_243X}, |
| |
| /* PRCM #5b - ratio1 - SLOW*/ |
| {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ |
| R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, |
| R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, |
| SDRC_RFR_CTRL_100MHz, |
| RATE_IN_243X}, |
| |
| /* PRCM-boot/bypass */ |
| {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ |
| RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, |
| RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, |
| SDRC_RFR_CTRL_BYPASS, |
| RATE_IN_243X}, |
| |
| /* PRCM-boot/bypass */ |
| {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ |
| RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, |
| RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, |
| MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, |
| SDRC_RFR_CTRL_BYPASS, |
| RATE_IN_243X}, |
| |
| { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, |
| }; |
| |
| /*------------------------------------------------------------------------- |
| * 24xx clock tree. |
| * |
| * NOTE:In many cases here we are assigning a 'default' parent. In many |
| * cases the parent is selectable. The get/set parent calls will also |
| * switch sources. |
| * |
| * Many some clocks say always_enabled, but they can be auto idled for |
| * power savings. They will always be available upon clock request. |
| * |
| * Several sources are given initial rates which may be wrong, this will |
| * be fixed up in the init func. |
| * |
| * Things are broadly separated below by clock domains. It is |
| * noteworthy that most periferals have dependencies on multiple clock |
| * domains. Many get their interface clocks from the L4 domain, but get |
| * functional clocks from fixed sources or other core domain derived |
| * clocks. |
| *-------------------------------------------------------------------------*/ |
| |
| /* Base external input clocks */ |
| static struct clk func_32k_ck = { |
| .name = "func_32k_ck", |
| .ops = &clkops_null, |
| .rate = 32000, |
| .flags = RATE_FIXED, |
| .clkdm_name = "wkup_clkdm", |
| }; |
| |
| static struct clk secure_32k_ck = { |
| .name = "secure_32k_ck", |
| .ops = &clkops_null, |
| .rate = 32768, |
| .flags = RATE_FIXED, |
| .clkdm_name = "wkup_clkdm", |
| }; |
| |
| /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ |
| static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ |
| .name = "osc_ck", |
| .ops = &clkops_oscck, |
| .clkdm_name = "wkup_clkdm", |
| .recalc = &omap2_osc_clk_recalc, |
| }; |
| |
| /* Without modem likely 12MHz, with modem likely 13MHz */ |
| static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */ |
| .name = "sys_ck", /* ~ ref_clk also */ |
| .ops = &clkops_null, |
| .parent = &osc_ck, |
| .clkdm_name = "wkup_clkdm", |
| .recalc = &omap2_sys_clk_recalc, |
| }; |
| |
| static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ |
| .name = "alt_ck", |
| .ops = &clkops_null, |
| .rate = 54000000, |
| .flags = RATE_FIXED, |
| .clkdm_name = "wkup_clkdm", |
| }; |
| |
| /* |
| * Analog domain root source clocks |
| */ |
| |
| /* dpll_ck, is broken out in to special cases through clksel */ |
| /* REVISIT: Rate changes on dpll_ck trigger a full set change. ... |
| * deal with this |
| */ |
| |
| static struct dpll_data dpll_dd = { |
| .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), |
| .mult_mask = OMAP24XX_DPLL_MULT_MASK, |
| .div1_mask = OMAP24XX_DPLL_DIV_MASK, |
| .clk_bypass = &sys_ck, |
| .clk_ref = &sys_ck, |
| .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), |
| .enable_mask = OMAP24XX_EN_DPLL_MASK, |
| .max_multiplier = 1024, |
| .min_divider = 1, |
| .max_divider = 16, |
| .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE |
| }; |
| |
| /* |
| * XXX Cannot add round_rate here yet, as this is still a composite clock, |
| * not just a DPLL |
| */ |
| static struct clk dpll_ck = { |
| .name = "dpll_ck", |
| .ops = &clkops_null, |
| .parent = &sys_ck, /* Can be func_32k also */ |
| .dpll_data = &dpll_dd, |
| .clkdm_name = "wkup_clkdm", |
| .recalc = &omap2_dpllcore_recalc, |
| .set_rate = &omap2_reprogram_dpllcore, |
| }; |
| |
| static struct clk apll96_ck = { |
| .name = "apll96_ck", |
| .ops = &clkops_fixed, |
| .parent = &sys_ck, |
| .rate = 96000000, |
| .flags = RATE_FIXED | ENABLE_ON_INIT, |
| .clkdm_name = "wkup_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), |
| .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT, |
| }; |
| |
| static struct clk apll54_ck = { |
| .name = "apll54_ck", |
| .ops = &clkops_fixed, |
| .parent = &sys_ck, |
| .rate = 54000000, |
| .flags = RATE_FIXED | ENABLE_ON_INIT, |
| .clkdm_name = "wkup_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), |
| .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT, |
| }; |
| |
| /* |
| * PRCM digital base sources |
| */ |
| |
| /* func_54m_ck */ |
| |
| static const struct clksel_rate func_54m_apll54_rates[] = { |
| { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 }, |
| }; |
| |
| static const struct clksel_rate func_54m_alt_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 }, |
| }; |
| |
| static const struct clksel func_54m_clksel[] = { |
| { .parent = &apll54_ck, .rates = func_54m_apll54_rates, }, |
| { .parent = &alt_ck, .rates = func_54m_alt_rates, }, |
| { .parent = NULL }, |
| }; |
| |
| static struct clk func_54m_ck = { |
| .name = "func_54m_ck", |
| .ops = &clkops_null, |
| .parent = &apll54_ck, /* can also be alt_clk */ |
| .clkdm_name = "wkup_clkdm", |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), |
| .clksel_mask = OMAP24XX_54M_SOURCE, |
| .clksel = func_54m_clksel, |
| .recalc = &omap2_clksel_recalc, |
| }; |
| |
| static struct clk core_ck = { |
| .name = "core_ck", |
| .ops = &clkops_null, |
| .parent = &dpll_ck, /* can also be 32k */ |
| .clkdm_name = "wkup_clkdm", |
| .recalc = &followparent_recalc, |
| }; |
| |
| /* func_96m_ck */ |
| static const struct clksel_rate func_96m_apll96_rates[] = { |
| { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 }, |
| }; |
| |
| static const struct clksel_rate func_96m_alt_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_243X | DEFAULT_RATE }, |
| { .div = 0 }, |
| }; |
| |
| static const struct clksel func_96m_clksel[] = { |
| { .parent = &apll96_ck, .rates = func_96m_apll96_rates }, |
| { .parent = &alt_ck, .rates = func_96m_alt_rates }, |
| { .parent = NULL } |
| }; |
| |
| /* The parent of this clock is not selectable on 2420. */ |
| static struct clk func_96m_ck = { |
| .name = "func_96m_ck", |
| .ops = &clkops_null, |
| .parent = &apll96_ck, |
| .clkdm_name = "wkup_clkdm", |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), |
| .clksel_mask = OMAP2430_96M_SOURCE, |
| .clksel = func_96m_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| /* func_48m_ck */ |
| |
| static const struct clksel_rate func_48m_apll96_rates[] = { |
| { .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 }, |
| }; |
| |
| static const struct clksel_rate func_48m_alt_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 }, |
| }; |
| |
| static const struct clksel func_48m_clksel[] = { |
| { .parent = &apll96_ck, .rates = func_48m_apll96_rates }, |
| { .parent = &alt_ck, .rates = func_48m_alt_rates }, |
| { .parent = NULL } |
| }; |
| |
| static struct clk func_48m_ck = { |
| .name = "func_48m_ck", |
| .ops = &clkops_null, |
| .parent = &apll96_ck, /* 96M or Alt */ |
| .clkdm_name = "wkup_clkdm", |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), |
| .clksel_mask = OMAP24XX_48M_SOURCE, |
| .clksel = func_48m_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| static struct clk func_12m_ck = { |
| .name = "func_12m_ck", |
| .ops = &clkops_null, |
| .parent = &func_48m_ck, |
| .fixed_div = 4, |
| .clkdm_name = "wkup_clkdm", |
| .recalc = &omap2_fixed_divisor_recalc, |
| }; |
| |
| /* Secure timer, only available in secure mode */ |
| static struct clk wdt1_osc_ck = { |
| .name = "ck_wdt1_osc", |
| .ops = &clkops_null, /* RMK: missing? */ |
| .parent = &osc_ck, |
| .recalc = &followparent_recalc, |
| }; |
| |
| /* |
| * The common_clkout* clksel_rate structs are common to |
| * sys_clkout, sys_clkout_src, sys_clkout2, and sys_clkout2_src. |
| * sys_clkout2_* are 2420-only, so the |
| * clksel_rate flags fields are inaccurate for those clocks. This is |
| * harmless since access to those clocks are gated by the struct clk |
| * flags fields, which mark them as 2420-only. |
| */ |
| static const struct clksel_rate common_clkout_src_core_rates[] = { |
| { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel_rate common_clkout_src_sys_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel_rate common_clkout_src_96m_rates[] = { |
| { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel_rate common_clkout_src_54m_rates[] = { |
| { .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel common_clkout_src_clksel[] = { |
| { .parent = &core_ck, .rates = common_clkout_src_core_rates }, |
| { .parent = &sys_ck, .rates = common_clkout_src_sys_rates }, |
| { .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates }, |
| { .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates }, |
| { .parent = NULL } |
| }; |
| |
| static struct clk sys_clkout_src = { |
| .name = "sys_clkout_src", |
| .ops = &clkops_omap2_dflt, |
| .parent = &func_54m_ck, |
| .clkdm_name = "wkup_clkdm", |
| .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, |
| .enable_bit = OMAP24XX_CLKOUT_EN_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, |
| .clksel_mask = OMAP24XX_CLKOUT_SOURCE_MASK, |
| .clksel = common_clkout_src_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| static const struct clksel_rate common_clkout_rates[] = { |
| { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 2, .val = 1, .flags = RATE_IN_24XX }, |
| { .div = 4, .val = 2, .flags = RATE_IN_24XX }, |
| { .div = 8, .val = 3, .flags = RATE_IN_24XX }, |
| { .div = 16, .val = 4, .flags = RATE_IN_24XX }, |
| { .div = 0 }, |
| }; |
| |
| static const struct clksel sys_clkout_clksel[] = { |
| { .parent = &sys_clkout_src, .rates = common_clkout_rates }, |
| { .parent = NULL } |
| }; |
| |
| static struct clk sys_clkout = { |
| .name = "sys_clkout", |
| .ops = &clkops_null, |
| .parent = &sys_clkout_src, |
| .clkdm_name = "wkup_clkdm", |
| .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, |
| .clksel_mask = OMAP24XX_CLKOUT_DIV_MASK, |
| .clksel = sys_clkout_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| /* In 2430, new in 2420 ES2 */ |
| static struct clk sys_clkout2_src = { |
| .name = "sys_clkout2_src", |
| .ops = &clkops_omap2_dflt, |
| .parent = &func_54m_ck, |
| .clkdm_name = "wkup_clkdm", |
| .enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL, |
| .enable_bit = OMAP2420_CLKOUT2_EN_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, |
| .clksel_mask = OMAP2420_CLKOUT2_SOURCE_MASK, |
| .clksel = common_clkout_src_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| static const struct clksel sys_clkout2_clksel[] = { |
| { .parent = &sys_clkout2_src, .rates = common_clkout_rates }, |
| { .parent = NULL } |
| }; |
| |
| /* In 2430, new in 2420 ES2 */ |
| static struct clk sys_clkout2 = { |
| .name = "sys_clkout2", |
| .ops = &clkops_null, |
| .parent = &sys_clkout2_src, |
| .clkdm_name = "wkup_clkdm", |
| .clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL, |
| .clksel_mask = OMAP2420_CLKOUT2_DIV_MASK, |
| .clksel = sys_clkout2_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| static struct clk emul_ck = { |
| .name = "emul_ck", |
| .ops = &clkops_omap2_dflt, |
| .parent = &func_54m_ck, |
| .clkdm_name = "wkup_clkdm", |
| .enable_reg = OMAP24XX_PRCM_CLKEMUL_CTRL, |
| .enable_bit = OMAP24XX_EMULATION_EN_SHIFT, |
| .recalc = &followparent_recalc, |
| |
| }; |
| |
| /* |
| * MPU clock domain |
| * Clocks: |
| * MPU_FCLK, MPU_ICLK |
| * INT_M_FCLK, INT_M_I_CLK |
| * |
| * - Individual clocks are hardware managed. |
| * - Base divider comes from: CM_CLKSEL_MPU |
| * |
| */ |
| static const struct clksel_rate mpu_core_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 2, .val = 2, .flags = RATE_IN_24XX }, |
| { .div = 4, .val = 4, .flags = RATE_IN_242X }, |
| { .div = 6, .val = 6, .flags = RATE_IN_242X }, |
| { .div = 8, .val = 8, .flags = RATE_IN_242X }, |
| { .div = 0 }, |
| }; |
| |
| static const struct clksel mpu_clksel[] = { |
| { .parent = &core_ck, .rates = mpu_core_rates }, |
| { .parent = NULL } |
| }; |
| |
| static struct clk mpu_ck = { /* Control cpu */ |
| .name = "mpu_ck", |
| .ops = &clkops_null, |
| .parent = &core_ck, |
| .flags = DELAYED_APP | CONFIG_PARTICIPANT, |
| .clkdm_name = "mpu_clkdm", |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL), |
| .clksel_mask = OMAP24XX_CLKSEL_MPU_MASK, |
| .clksel = mpu_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| /* |
| * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain |
| * Clocks: |
| * 2430: IVA2.1_FCLK (really just DSP_FCLK), IVA2.1_ICLK |
| * 2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP |
| * |
| * Won't be too specific here. The core clock comes into this block |
| * it is divided then tee'ed. One branch goes directly to xyz enable |
| * controls. The other branch gets further divided by 2 then possibly |
| * routed into a synchronizer and out of clocks abc. |
| */ |
| static const struct clksel_rate dsp_fck_core_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 2, .val = 2, .flags = RATE_IN_24XX }, |
| { .div = 3, .val = 3, .flags = RATE_IN_24XX }, |
| { .div = 4, .val = 4, .flags = RATE_IN_24XX }, |
| { .div = 6, .val = 6, .flags = RATE_IN_242X }, |
| { .div = 8, .val = 8, .flags = RATE_IN_242X }, |
| { .div = 12, .val = 12, .flags = RATE_IN_242X }, |
| { .div = 0 }, |
| }; |
| |
| static const struct clksel dsp_fck_clksel[] = { |
| { .parent = &core_ck, .rates = dsp_fck_core_rates }, |
| { .parent = NULL } |
| }; |
| |
| static struct clk dsp_fck = { |
| .name = "dsp_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &core_ck, |
| .flags = DELAYED_APP | CONFIG_PARTICIPANT, |
| .clkdm_name = "dsp_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), |
| .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, |
| .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL), |
| .clksel_mask = OMAP24XX_CLKSEL_DSP_MASK, |
| .clksel = dsp_fck_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| /* DSP interface clock */ |
| static const struct clksel_rate dsp_irate_ick_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 2, .val = 2, .flags = RATE_IN_24XX }, |
| { .div = 3, .val = 3, .flags = RATE_IN_243X }, |
| { .div = 0 }, |
| }; |
| |
| static const struct clksel dsp_irate_ick_clksel[] = { |
| { .parent = &dsp_fck, .rates = dsp_irate_ick_rates }, |
| { .parent = NULL } |
| }; |
| |
| /* This clock does not exist as such in the TRM. */ |
| static struct clk dsp_irate_ick = { |
| .name = "dsp_irate_ick", |
| .ops = &clkops_null, |
| .parent = &dsp_fck, |
| .flags = DELAYED_APP | CONFIG_PARTICIPANT, |
| .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL), |
| .clksel_mask = OMAP24XX_CLKSEL_DSP_IF_MASK, |
| .clksel = dsp_irate_ick_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| /* 2420 only */ |
| static struct clk dsp_ick = { |
| .name = "dsp_ick", /* apparently ipi and isp */ |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &dsp_irate_ick, |
| .flags = DELAYED_APP | CONFIG_PARTICIPANT, |
| .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN), |
| .enable_bit = OMAP2420_EN_DSP_IPI_SHIFT, /* for ipi */ |
| }; |
| |
| /* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */ |
| static struct clk iva2_1_ick = { |
| .name = "iva2_1_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &dsp_irate_ick, |
| .flags = DELAYED_APP | CONFIG_PARTICIPANT, |
| .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), |
| .enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, |
| }; |
| |
| /* |
| * The IVA1 is an ARM7 core on the 2420 that has nothing to do with |
| * the C54x, but which is contained in the DSP powerdomain. Does not |
| * exist on later OMAPs. |
| */ |
| static struct clk iva1_ifck = { |
| .name = "iva1_ifck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &core_ck, |
| .flags = CONFIG_PARTICIPANT | DELAYED_APP, |
| .clkdm_name = "iva1_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), |
| .enable_bit = OMAP2420_EN_IVA_COP_SHIFT, |
| .clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL), |
| .clksel_mask = OMAP2420_CLKSEL_IVA_MASK, |
| .clksel = dsp_fck_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| /* IVA1 mpu/int/i/f clocks are /2 of parent */ |
| static struct clk iva1_mpu_int_ifck = { |
| .name = "iva1_mpu_int_ifck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &iva1_ifck, |
| .clkdm_name = "iva1_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN), |
| .enable_bit = OMAP2420_EN_IVA_MPU_SHIFT, |
| .fixed_div = 2, |
| .recalc = &omap2_fixed_divisor_recalc, |
| }; |
| |
| /* |
| * L3 clock domain |
| * L3 clocks are used for both interface and functional clocks to |
| * multiple entities. Some of these clocks are completely managed |
| * by hardware, and some others allow software control. Hardware |
| * managed ones general are based on directly CLK_REQ signals and |
| * various auto idle settings. The functional spec sets many of these |
| * as 'tie-high' for their enables. |
| * |
| * I-CLOCKS: |
| * L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA |
| * CAM, HS-USB. |
| * F-CLOCK |
| * SSI. |
| * |
| * GPMC memories and SDRC have timing and clock sensitive registers which |
| * may very well need notification when the clock changes. Currently for low |
| * operating points, these are taken care of in sleep.S. |
| */ |
| static const struct clksel_rate core_l3_core_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_24XX }, |
| { .div = 2, .val = 2, .flags = RATE_IN_242X }, |
| { .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 6, .val = 6, .flags = RATE_IN_24XX }, |
| { .div = 8, .val = 8, .flags = RATE_IN_242X }, |
| { .div = 12, .val = 12, .flags = RATE_IN_242X }, |
| { .div = 16, .val = 16, .flags = RATE_IN_242X }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel core_l3_clksel[] = { |
| { .parent = &core_ck, .rates = core_l3_core_rates }, |
| { .parent = NULL } |
| }; |
| |
| static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ |
| .name = "core_l3_ck", |
| .ops = &clkops_null, |
| .parent = &core_ck, |
| .flags = DELAYED_APP | CONFIG_PARTICIPANT, |
| .clkdm_name = "core_l3_clkdm", |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), |
| .clksel_mask = OMAP24XX_CLKSEL_L3_MASK, |
| .clksel = core_l3_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| /* usb_l4_ick */ |
| static const struct clksel_rate usb_l4_ick_core_l3_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_24XX }, |
| { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 4, .val = 4, .flags = RATE_IN_24XX }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel usb_l4_ick_clksel[] = { |
| { .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates }, |
| { .parent = NULL }, |
| }; |
| |
| /* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */ |
| static struct clk usb_l4_ick = { /* FS-USB interface clock */ |
| .name = "usb_l4_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &core_l3_ck, |
| .flags = DELAYED_APP | CONFIG_PARTICIPANT, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), |
| .enable_bit = OMAP24XX_EN_USB_SHIFT, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), |
| .clksel_mask = OMAP24XX_CLKSEL_USB_MASK, |
| .clksel = usb_l4_ick_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| /* |
| * L4 clock management domain |
| * |
| * This domain contains lots of interface clocks from the L4 interface, some |
| * functional clocks. Fixed APLL functional source clocks are managed in |
| * this domain. |
| */ |
| static const struct clksel_rate l4_core_l3_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 2, .val = 2, .flags = RATE_IN_24XX }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel l4_clksel[] = { |
| { .parent = &core_l3_ck, .rates = l4_core_l3_rates }, |
| { .parent = NULL } |
| }; |
| |
| static struct clk l4_ck = { /* used both as an ick and fck */ |
| .name = "l4_ck", |
| .ops = &clkops_null, |
| .parent = &core_l3_ck, |
| .flags = DELAYED_APP, |
| .clkdm_name = "core_l4_clkdm", |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), |
| .clksel_mask = OMAP24XX_CLKSEL_L4_MASK, |
| .clksel = l4_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| /* |
| * SSI is in L3 management domain, its direct parent is core not l3, |
| * many core power domain entities are grouped into the L3 clock |
| * domain. |
| * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_ICLK |
| * |
| * ssr = core/1/2/3/4/5, sst = 1/2 ssr. |
| */ |
| static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_24XX }, |
| { .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 3, .val = 3, .flags = RATE_IN_24XX }, |
| { .div = 4, .val = 4, .flags = RATE_IN_24XX }, |
| { .div = 5, .val = 5, .flags = RATE_IN_243X }, |
| { .div = 6, .val = 6, .flags = RATE_IN_242X }, |
| { .div = 8, .val = 8, .flags = RATE_IN_242X }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel ssi_ssr_sst_fck_clksel[] = { |
| { .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates }, |
| { .parent = NULL } |
| }; |
| |
| static struct clk ssi_ssr_sst_fck = { |
| .name = "ssi_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &core_ck, |
| .flags = DELAYED_APP, |
| .clkdm_name = "core_l3_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP24XX_EN_SSI_SHIFT, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), |
| .clksel_mask = OMAP24XX_CLKSEL_SSI_MASK, |
| .clksel = ssi_ssr_sst_fck_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| /* |
| * Presumably this is the same as SSI_ICLK. |
| * TRM contradicts itself on what clockdomain SSI_ICLK is in |
| */ |
| static struct clk ssi_l4_ick = { |
| .name = "ssi_l4_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), |
| .enable_bit = OMAP24XX_EN_SSI_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| |
| /* |
| * GFX clock domain |
| * Clocks: |
| * GFX_FCLK, GFX_ICLK |
| * GFX_CG1(2d), GFX_CG2(3d) |
| * |
| * GFX_FCLK runs from L3, and is divided by (1,2,3,4) |
| * The 2d and 3d clocks run at a hardware determined |
| * divided value of fclk. |
| * |
| */ |
| /* XXX REVISIT: GFX clock is part of CONFIG_PARTICIPANT, no? doublecheck. */ |
| |
| /* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */ |
| static const struct clksel gfx_fck_clksel[] = { |
| { .parent = &core_l3_ck, .rates = gfx_l3_rates }, |
| { .parent = NULL }, |
| }; |
| |
| static struct clk gfx_3d_fck = { |
| .name = "gfx_3d_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &core_l3_ck, |
| .clkdm_name = "gfx_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), |
| .enable_bit = OMAP24XX_EN_3D_SHIFT, |
| .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), |
| .clksel_mask = OMAP_CLKSEL_GFX_MASK, |
| .clksel = gfx_fck_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| static struct clk gfx_2d_fck = { |
| .name = "gfx_2d_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &core_l3_ck, |
| .clkdm_name = "gfx_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), |
| .enable_bit = OMAP24XX_EN_2D_SHIFT, |
| .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), |
| .clksel_mask = OMAP_CLKSEL_GFX_MASK, |
| .clksel = gfx_fck_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| static struct clk gfx_ick = { |
| .name = "gfx_ick", /* From l3 */ |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &core_l3_ck, |
| .clkdm_name = "gfx_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), |
| .enable_bit = OMAP_EN_GFX_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| /* |
| * Modem clock domain (2430) |
| * CLOCKS: |
| * MDM_OSC_CLK |
| * MDM_ICLK |
| * These clocks are usable in chassis mode only. |
| */ |
| static const struct clksel_rate mdm_ick_core_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_243X }, |
| { .div = 4, .val = 4, .flags = RATE_IN_243X | DEFAULT_RATE }, |
| { .div = 6, .val = 6, .flags = RATE_IN_243X }, |
| { .div = 9, .val = 9, .flags = RATE_IN_243X }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel mdm_ick_clksel[] = { |
| { .parent = &core_ck, .rates = mdm_ick_core_rates }, |
| { .parent = NULL } |
| }; |
| |
| static struct clk mdm_ick = { /* used both as a ick and fck */ |
| .name = "mdm_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &core_ck, |
| .flags = DELAYED_APP | CONFIG_PARTICIPANT, |
| .clkdm_name = "mdm_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN), |
| .enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT, |
| .clksel_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL), |
| .clksel_mask = OMAP2430_CLKSEL_MDM_MASK, |
| .clksel = mdm_ick_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| static struct clk mdm_osc_ck = { |
| .name = "mdm_osc_ck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &osc_ck, |
| .clkdm_name = "mdm_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN), |
| .enable_bit = OMAP2430_EN_OSC_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| /* |
| * DSS clock domain |
| * CLOCKs: |
| * DSS_L4_ICLK, DSS_L3_ICLK, |
| * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK |
| * |
| * DSS is both initiator and target. |
| */ |
| /* XXX Add RATE_NOT_VALIDATED */ |
| |
| static const struct clksel_rate dss1_fck_sys_rates[] = { |
| { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel_rate dss1_fck_core_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_24XX }, |
| { .div = 2, .val = 2, .flags = RATE_IN_24XX }, |
| { .div = 3, .val = 3, .flags = RATE_IN_24XX }, |
| { .div = 4, .val = 4, .flags = RATE_IN_24XX }, |
| { .div = 5, .val = 5, .flags = RATE_IN_24XX }, |
| { .div = 6, .val = 6, .flags = RATE_IN_24XX }, |
| { .div = 8, .val = 8, .flags = RATE_IN_24XX }, |
| { .div = 9, .val = 9, .flags = RATE_IN_24XX }, |
| { .div = 12, .val = 12, .flags = RATE_IN_24XX }, |
| { .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel dss1_fck_clksel[] = { |
| { .parent = &sys_ck, .rates = dss1_fck_sys_rates }, |
| { .parent = &core_ck, .rates = dss1_fck_core_rates }, |
| { .parent = NULL }, |
| }; |
| |
| static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ |
| .name = "dss_ick", |
| .ops = &clkops_omap2_dflt, |
| .parent = &l4_ck, /* really both l3 and l4 */ |
| .clkdm_name = "dss_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_DSS1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk dss1_fck = { |
| .name = "dss1_fck", |
| .ops = &clkops_omap2_dflt, |
| .parent = &core_ck, /* Core or sys */ |
| .flags = DELAYED_APP, |
| .clkdm_name = "dss_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_DSS1_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), |
| .clksel_mask = OMAP24XX_CLKSEL_DSS1_MASK, |
| .clksel = dss1_fck_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| static const struct clksel_rate dss2_fck_sys_rates[] = { |
| { .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel_rate dss2_fck_48m_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel dss2_fck_clksel[] = { |
| { .parent = &sys_ck, .rates = dss2_fck_sys_rates }, |
| { .parent = &func_48m_ck, .rates = dss2_fck_48m_rates }, |
| { .parent = NULL } |
| }; |
| |
| static struct clk dss2_fck = { /* Alt clk used in power management */ |
| .name = "dss2_fck", |
| .ops = &clkops_omap2_dflt, |
| .parent = &sys_ck, /* fixed at sys_ck or 48MHz */ |
| .flags = DELAYED_APP, |
| .clkdm_name = "dss_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_DSS2_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), |
| .clksel_mask = OMAP24XX_CLKSEL_DSS2_MASK, |
| .clksel = dss2_fck_clksel, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk dss_54m_fck = { /* Alt clk used in power management */ |
| .name = "dss_54m_fck", /* 54m tv clk */ |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_54m_ck, |
| .clkdm_name = "dss_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_TV_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| /* |
| * CORE power domain ICLK & FCLK defines. |
| * Many of the these can have more than one possible parent. Entries |
| * here will likely have an L4 interface parent, and may have multiple |
| * functional clock parents. |
| */ |
| static const struct clksel_rate gpt_alt_rates[] = { |
| { .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel omap24xx_gpt_clksel[] = { |
| { .parent = &func_32k_ck, .rates = gpt_32k_rates }, |
| { .parent = &sys_ck, .rates = gpt_sys_rates }, |
| { .parent = &alt_ck, .rates = gpt_alt_rates }, |
| { .parent = NULL }, |
| }; |
| |
| static struct clk gpt1_ick = { |
| .name = "gpt1_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), |
| .enable_bit = OMAP24XX_EN_GPT1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpt1_fck = { |
| .name = "gpt1_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), |
| .enable_bit = OMAP24XX_EN_GPT1_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1), |
| .clksel_mask = OMAP24XX_CLKSEL_GPT1_MASK, |
| .clksel = omap24xx_gpt_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| static struct clk gpt2_ick = { |
| .name = "gpt2_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT2_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpt2_fck = { |
| .name = "gpt2_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT2_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), |
| .clksel_mask = OMAP24XX_CLKSEL_GPT2_MASK, |
| .clksel = omap24xx_gpt_clksel, |
| .recalc = &omap2_clksel_recalc, |
| }; |
| |
| static struct clk gpt3_ick = { |
| .name = "gpt3_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT3_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpt3_fck = { |
| .name = "gpt3_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT3_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), |
| .clksel_mask = OMAP24XX_CLKSEL_GPT3_MASK, |
| .clksel = omap24xx_gpt_clksel, |
| .recalc = &omap2_clksel_recalc, |
| }; |
| |
| static struct clk gpt4_ick = { |
| .name = "gpt4_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT4_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpt4_fck = { |
| .name = "gpt4_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT4_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), |
| .clksel_mask = OMAP24XX_CLKSEL_GPT4_MASK, |
| .clksel = omap24xx_gpt_clksel, |
| .recalc = &omap2_clksel_recalc, |
| }; |
| |
| static struct clk gpt5_ick = { |
| .name = "gpt5_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT5_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpt5_fck = { |
| .name = "gpt5_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT5_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), |
| .clksel_mask = OMAP24XX_CLKSEL_GPT5_MASK, |
| .clksel = omap24xx_gpt_clksel, |
| .recalc = &omap2_clksel_recalc, |
| }; |
| |
| static struct clk gpt6_ick = { |
| .name = "gpt6_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT6_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpt6_fck = { |
| .name = "gpt6_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT6_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), |
| .clksel_mask = OMAP24XX_CLKSEL_GPT6_MASK, |
| .clksel = omap24xx_gpt_clksel, |
| .recalc = &omap2_clksel_recalc, |
| }; |
| |
| static struct clk gpt7_ick = { |
| .name = "gpt7_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT7_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpt7_fck = { |
| .name = "gpt7_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT7_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), |
| .clksel_mask = OMAP24XX_CLKSEL_GPT7_MASK, |
| .clksel = omap24xx_gpt_clksel, |
| .recalc = &omap2_clksel_recalc, |
| }; |
| |
| static struct clk gpt8_ick = { |
| .name = "gpt8_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT8_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpt8_fck = { |
| .name = "gpt8_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT8_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), |
| .clksel_mask = OMAP24XX_CLKSEL_GPT8_MASK, |
| .clksel = omap24xx_gpt_clksel, |
| .recalc = &omap2_clksel_recalc, |
| }; |
| |
| static struct clk gpt9_ick = { |
| .name = "gpt9_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT9_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpt9_fck = { |
| .name = "gpt9_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT9_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), |
| .clksel_mask = OMAP24XX_CLKSEL_GPT9_MASK, |
| .clksel = omap24xx_gpt_clksel, |
| .recalc = &omap2_clksel_recalc, |
| }; |
| |
| static struct clk gpt10_ick = { |
| .name = "gpt10_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT10_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpt10_fck = { |
| .name = "gpt10_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT10_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), |
| .clksel_mask = OMAP24XX_CLKSEL_GPT10_MASK, |
| .clksel = omap24xx_gpt_clksel, |
| .recalc = &omap2_clksel_recalc, |
| }; |
| |
| static struct clk gpt11_ick = { |
| .name = "gpt11_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT11_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpt11_fck = { |
| .name = "gpt11_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT11_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), |
| .clksel_mask = OMAP24XX_CLKSEL_GPT11_MASK, |
| .clksel = omap24xx_gpt_clksel, |
| .recalc = &omap2_clksel_recalc, |
| }; |
| |
| static struct clk gpt12_ick = { |
| .name = "gpt12_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT12_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpt12_fck = { |
| .name = "gpt12_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &secure_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_GPT12_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2), |
| .clksel_mask = OMAP24XX_CLKSEL_GPT12_MASK, |
| .clksel = omap24xx_gpt_clksel, |
| .recalc = &omap2_clksel_recalc, |
| }; |
| |
| static struct clk mcbsp1_ick = { |
| .name = "mcbsp_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 1, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcbsp1_fck = { |
| .name = "mcbsp_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 1, |
| .parent = &func_96m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcbsp2_ick = { |
| .name = "mcbsp_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 2, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcbsp2_fck = { |
| .name = "mcbsp_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 2, |
| .parent = &func_96m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcbsp3_ick = { |
| .name = "mcbsp_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 3, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), |
| .enable_bit = OMAP2430_EN_MCBSP3_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcbsp3_fck = { |
| .name = "mcbsp_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 3, |
| .parent = &func_96m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP2430_EN_MCBSP3_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcbsp4_ick = { |
| .name = "mcbsp_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 4, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), |
| .enable_bit = OMAP2430_EN_MCBSP4_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcbsp4_fck = { |
| .name = "mcbsp_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 4, |
| .parent = &func_96m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP2430_EN_MCBSP4_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcbsp5_ick = { |
| .name = "mcbsp_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 5, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), |
| .enable_bit = OMAP2430_EN_MCBSP5_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcbsp5_fck = { |
| .name = "mcbsp_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 5, |
| .parent = &func_96m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP2430_EN_MCBSP5_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcspi1_ick = { |
| .name = "mcspi_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 1, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcspi1_fck = { |
| .name = "mcspi_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 1, |
| .parent = &func_48m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcspi2_ick = { |
| .name = "mcspi_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 2, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcspi2_fck = { |
| .name = "mcspi_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 2, |
| .parent = &func_48m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcspi3_ick = { |
| .name = "mcspi_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 3, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), |
| .enable_bit = OMAP2430_EN_MCSPI3_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mcspi3_fck = { |
| .name = "mcspi_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 3, |
| .parent = &func_48m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP2430_EN_MCSPI3_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk uart1_ick = { |
| .name = "uart1_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_UART1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk uart1_fck = { |
| .name = "uart1_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_48m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_UART1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk uart2_ick = { |
| .name = "uart2_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_UART2_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk uart2_fck = { |
| .name = "uart2_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_48m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_UART2_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk uart3_ick = { |
| .name = "uart3_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), |
| .enable_bit = OMAP24XX_EN_UART3_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk uart3_fck = { |
| .name = "uart3_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_48m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP24XX_EN_UART3_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpios_ick = { |
| .name = "gpios_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), |
| .enable_bit = OMAP24XX_EN_GPIOS_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpios_fck = { |
| .name = "gpios_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "wkup_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), |
| .enable_bit = OMAP24XX_EN_GPIOS_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mpu_wdt_ick = { |
| .name = "mpu_wdt_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), |
| .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mpu_wdt_fck = { |
| .name = "mpu_wdt_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "wkup_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), |
| .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk sync_32k_ick = { |
| .name = "sync_32k_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .flags = ENABLE_ON_INIT, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), |
| .enable_bit = OMAP24XX_EN_32KSYNC_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk wdt1_ick = { |
| .name = "wdt1_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), |
| .enable_bit = OMAP24XX_EN_WDT1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk omapctrl_ick = { |
| .name = "omapctrl_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .flags = ENABLE_ON_INIT, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), |
| .enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk icr_ick = { |
| .name = "icr_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), |
| .enable_bit = OMAP2430_EN_ICR_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk cam_ick = { |
| .name = "cam_ick", |
| .ops = &clkops_omap2_dflt, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_CAM_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| /* |
| * cam_fck controls both CAM_MCLK and CAM_FCLK. It should probably be |
| * split into two separate clocks, since the parent clocks are different |
| * and the clockdomains are also different. |
| */ |
| static struct clk cam_fck = { |
| .name = "cam_fck", |
| .ops = &clkops_omap2_dflt, |
| .parent = &func_96m_ck, |
| .clkdm_name = "core_l3_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_CAM_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mailboxes_ick = { |
| .name = "mailboxes_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_MAILBOXES_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk wdt4_ick = { |
| .name = "wdt4_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_WDT4_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk wdt4_fck = { |
| .name = "wdt4_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_WDT4_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk wdt3_ick = { |
| .name = "wdt3_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP2420_EN_WDT3_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk wdt3_fck = { |
| .name = "wdt3_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP2420_EN_WDT3_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mspro_ick = { |
| .name = "mspro_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_MSPRO_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mspro_fck = { |
| .name = "mspro_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_96m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_MSPRO_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mmc_ick = { |
| .name = "mmc_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP2420_EN_MMC_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mmc_fck = { |
| .name = "mmc_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_96m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP2420_EN_MMC_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk fac_ick = { |
| .name = "fac_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_FAC_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk fac_fck = { |
| .name = "fac_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_12m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_FAC_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk eac_ick = { |
| .name = "eac_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP2420_EN_EAC_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk eac_fck = { |
| .name = "eac_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_96m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP2420_EN_EAC_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk hdq_ick = { |
| .name = "hdq_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP24XX_EN_HDQ_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk hdq_fck = { |
| .name = "hdq_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_12m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP24XX_EN_HDQ_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk i2c2_ick = { |
| .name = "i2c_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 2, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP2420_EN_I2C2_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk i2c2_fck = { |
| .name = "i2c_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 2, |
| .parent = &func_12m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP2420_EN_I2C2_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk i2chs2_fck = { |
| .name = "i2c_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 2, |
| .parent = &func_96m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP2430_EN_I2CHS2_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk i2c1_ick = { |
| .name = "i2c_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 1, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP2420_EN_I2C1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk i2c1_fck = { |
| .name = "i2c_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 1, |
| .parent = &func_12m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP2420_EN_I2C1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk i2chs1_fck = { |
| .name = "i2c_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 1, |
| .parent = &func_96m_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP2430_EN_I2CHS1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpmc_fck = { |
| .name = "gpmc_fck", |
| .ops = &clkops_null, /* RMK: missing? */ |
| .parent = &core_l3_ck, |
| .flags = ENABLE_ON_INIT, |
| .clkdm_name = "core_l3_clkdm", |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk sdma_fck = { |
| .name = "sdma_fck", |
| .ops = &clkops_null, /* RMK: missing? */ |
| .parent = &core_l3_ck, |
| .clkdm_name = "core_l3_clkdm", |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk sdma_ick = { |
| .name = "sdma_ick", |
| .ops = &clkops_null, /* RMK: missing? */ |
| .parent = &l4_ck, |
| .clkdm_name = "core_l3_clkdm", |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk vlynq_ick = { |
| .name = "vlynq_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &core_l3_ck, |
| .clkdm_name = "core_l3_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), |
| .enable_bit = OMAP2420_EN_VLYNQ_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static const struct clksel_rate vlynq_fck_96m_rates[] = { |
| { .div = 1, .val = 0, .flags = RATE_IN_242X | DEFAULT_RATE }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel_rate vlynq_fck_core_rates[] = { |
| { .div = 1, .val = 1, .flags = RATE_IN_242X }, |
| { .div = 2, .val = 2, .flags = RATE_IN_242X }, |
| { .div = 3, .val = 3, .flags = RATE_IN_242X }, |
| { .div = 4, .val = 4, .flags = RATE_IN_242X }, |
| { .div = 6, .val = 6, .flags = RATE_IN_242X }, |
| { .div = 8, .val = 8, .flags = RATE_IN_242X }, |
| { .div = 9, .val = 9, .flags = RATE_IN_242X }, |
| { .div = 12, .val = 12, .flags = RATE_IN_242X }, |
| { .div = 16, .val = 16, .flags = RATE_IN_242X | DEFAULT_RATE }, |
| { .div = 18, .val = 18, .flags = RATE_IN_242X }, |
| { .div = 0 } |
| }; |
| |
| static const struct clksel vlynq_fck_clksel[] = { |
| { .parent = &func_96m_ck, .rates = vlynq_fck_96m_rates }, |
| { .parent = &core_ck, .rates = vlynq_fck_core_rates }, |
| { .parent = NULL } |
| }; |
| |
| static struct clk vlynq_fck = { |
| .name = "vlynq_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_96m_ck, |
| .flags = DELAYED_APP, |
| .clkdm_name = "core_l3_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), |
| .enable_bit = OMAP2420_EN_VLYNQ_SHIFT, |
| .init = &omap2_init_clksel_parent, |
| .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1), |
| .clksel_mask = OMAP2420_CLKSEL_VLYNQ_MASK, |
| .clksel = vlynq_fck_clksel, |
| .recalc = &omap2_clksel_recalc, |
| .round_rate = &omap2_clksel_round_rate, |
| .set_rate = &omap2_clksel_set_rate |
| }; |
| |
| static struct clk sdrc_ick = { |
| .name = "sdrc_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .flags = ENABLE_ON_INIT, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), |
| .enable_bit = OMAP2430_EN_SDRC_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk des_ick = { |
| .name = "des_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), |
| .enable_bit = OMAP24XX_EN_DES_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk sha_ick = { |
| .name = "sha_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), |
| .enable_bit = OMAP24XX_EN_SHA_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk rng_ick = { |
| .name = "rng_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), |
| .enable_bit = OMAP24XX_EN_RNG_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk aes_ick = { |
| .name = "aes_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), |
| .enable_bit = OMAP24XX_EN_AES_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk pka_ick = { |
| .name = "pka_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4), |
| .enable_bit = OMAP24XX_EN_PKA_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk usb_fck = { |
| .name = "usb_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_48m_ck, |
| .clkdm_name = "core_l3_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP24XX_EN_USB_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk usbhs_ick = { |
| .name = "usbhs_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &core_l3_ck, |
| .clkdm_name = "core_l3_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), |
| .enable_bit = OMAP2430_EN_USBHS_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mmchs1_ick = { |
| .name = "mmchs_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), |
| .enable_bit = OMAP2430_EN_MMCHS1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mmchs1_fck = { |
| .name = "mmchs_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_96m_ck, |
| .clkdm_name = "core_l3_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP2430_EN_MMCHS1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mmchs2_ick = { |
| .name = "mmchs_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 1, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), |
| .enable_bit = OMAP2430_EN_MMCHS2_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mmchs2_fck = { |
| .name = "mmchs_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 1, |
| .parent = &func_96m_ck, |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP2430_EN_MMCHS2_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpio5_ick = { |
| .name = "gpio5_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), |
| .enable_bit = OMAP2430_EN_GPIO5_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk gpio5_fck = { |
| .name = "gpio5_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP2430_EN_GPIO5_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mdm_intc_ick = { |
| .name = "mdm_intc_ick", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &l4_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), |
| .enable_bit = OMAP2430_EN_MDM_INTC_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mmchsdb1_fck = { |
| .name = "mmchsdb_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP2430_EN_MMCHSDB1_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| static struct clk mmchsdb2_fck = { |
| .name = "mmchsdb_fck", |
| .ops = &clkops_omap2_dflt_wait, |
| .id = 1, |
| .parent = &func_32k_ck, |
| .clkdm_name = "core_l4_clkdm", |
| .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2), |
| .enable_bit = OMAP2430_EN_MMCHSDB2_SHIFT, |
| .recalc = &followparent_recalc, |
| }; |
| |
| /* |
| * This clock is a composite clock which does entire set changes then |
| * forces a rebalance. It keys on the MPU speed, but it really could |
| * be any key speed part of a set in the rate table. |
| * |
| * to really change a set, you need memory table sets which get changed |
| * in sram, pre-notifiers & post notifiers, changing the top set, without |
| * having low level display recalc's won't work... this is why dpm notifiers |
| * work, isr's off, walk a list of clocks already _off_ and not messing with |
| * the bus. |
| * |
| * This clock should have no parent. It embodies the entire upper level |
| * active set. A parent will mess up some of the init also. |
| */ |
| static struct clk virt_prcm_set = { |
| .name = "virt_prcm_set", |
| .ops = &clkops_null, |
| .flags = DELAYED_APP, |
| .parent = &mpu_ck, /* Indexed by mpu speed, no parent */ |
| .recalc = &omap2_table_mpu_recalc, /* sets are keyed on mpu rate */ |
| .set_rate = &omap2_select_table_rate, |
| .round_rate = &omap2_round_to_table_rate, |
| }; |
| |
| #endif |
| |