Revert "arm: pxa: Transition pxa27x to clk framework"
This reverts commit 9ff25d7b58d8a4374886843ed3ed21f1ef17bf16.
Originally reported on the kernel-build-reports mailing list[0]. The
problem is caused by kernel configs that select both pxa25x and pxa27x
such as cm_x2xx_defconfig and palmz72_defconfig. The short term solution
is to revert the patch introducing the failure. Longer term, all the PXA
chips will be converted to the common clock framework allowing support
for various PXA chips to build into a single image.
Reverting just this one patch does introduce some dead code into the
kernel, but that is offset by making it easier to convert the remaining
PXA platforms to the clock framework.
[0] http://lists.linaro.org/pipermail/kernel-build-reports/2014-October/005576.html
Signed-off-by: Mike Turquette <mturquette@linaro.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5d75015..32cbbd5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -621,7 +621,6 @@
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select AUTO_ZRELADDR
- select COMMON_CLK if PXA27x
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CLKSRC_OF
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f09259a..2fe1824 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -3,15 +3,16 @@
#
# Common support (must be linked before board specific support)
-obj-y += devices.o generic.o irq.o reset.o
+obj-y += clock.o devices.o generic.o irq.o \
+ reset.o
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
# Generic drivers that other drivers may depend upon
# SoC-specific code
-obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock.o clock-pxa2xx.o pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
+obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
+obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 668087f..b040d7d 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -37,8 +37,7 @@
#include "generic.h"
#include "devices.h"
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
+#include "clock.h"
void pxa27x_clear_otgph(void)
{
@@ -74,6 +73,174 @@
}
EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
+/* Crystal clock: 13MHz */
+#define BASE_CLK 13000000
+
+/*
+ * Get the clock frequency as reflected by CCSR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
+ */
+unsigned int pxa27x_get_clk_frequency_khz(int info)
+{
+ unsigned long ccsr, clkcfg;
+ unsigned int l, L, m, M, n2, N, S;
+ int cccr_a, t, ht, b;
+
+ ccsr = CCSR;
+ cccr_a = CCCR & (1 << 25);
+
+ /* Read clkcfg register: it has turbo, b, half-turbo (and f) */
+ asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
+ t = clkcfg & (1 << 0);
+ ht = clkcfg & (1 << 2);
+ b = clkcfg & (1 << 3);
+
+ l = ccsr & 0x1f;
+ n2 = (ccsr>>7) & 0xf;
+ m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;
+
+ L = l * BASE_CLK;
+ N = (L * n2) / 2;
+ M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
+ S = (b) ? L : (L/2);
+
+ if (info) {
+ printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
+ L / 1000000, (L % 1000000) / 10000, l );
+ printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
+ N / 1000000, (N % 1000000)/10000, n2 / 2, (n2 % 2)*5,
+ (t) ? "" : "in" );
+ printk( KERN_INFO "Memory clock: %d.%02dMHz (/%d)\n",
+ M / 1000000, (M % 1000000) / 10000, m );
+ printk( KERN_INFO "System bus clock: %d.%02dMHz \n",
+ S / 1000000, (S % 1000000) / 10000 );
+ }
+
+ return (t) ? (N/1000) : (L/1000);
+}
+
+/*
+ * Return the current mem clock frequency as reflected by CCCR[A], B, and L
+ */
+static unsigned long clk_pxa27x_mem_getrate(struct clk *clk)
+{
+ unsigned long ccsr, clkcfg;
+ unsigned int l, L, m, M;
+ int cccr_a, b;
+
+ ccsr = CCSR;
+ cccr_a = CCCR & (1 << 25);
+
+ /* Read clkcfg register: it has turbo, b, half-turbo (and f) */
+ asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
+ b = clkcfg & (1 << 3);
+
+ l = ccsr & 0x1f;
+ m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;
+
+ L = l * BASE_CLK;
+ M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
+
+ return M;
+}
+
+static const struct clkops clk_pxa27x_mem_ops = {
+ .enable = clk_dummy_enable,
+ .disable = clk_dummy_disable,
+ .getrate = clk_pxa27x_mem_getrate,
+};
+
+/*
+ * Return the current LCD clock frequency in units of 10kHz as
+ */
+static unsigned int pxa27x_get_lcdclk_frequency_10khz(void)
+{
+ unsigned long ccsr;
+ unsigned int l, L, k, K;
+
+ ccsr = CCSR;
+
+ l = ccsr & 0x1f;
+ k = (l <= 7) ? 1 : (l <= 16) ? 2 : 4;
+
+ L = l * BASE_CLK;
+ K = L / k;
+
+ return (K / 10000);
+}
+
+static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
+{
+ return pxa27x_get_lcdclk_frequency_10khz() * 10000;
+}
+
+static const struct clkops clk_pxa27x_lcd_ops = {
+ .enable = clk_pxa2xx_cken_enable,
+ .disable = clk_pxa2xx_cken_disable,
+ .getrate = clk_pxa27x_lcd_getrate,
+};
+
+static DEFINE_PXA2_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_stuart, STUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_i2s, I2S, 14682000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_i2c, I2C, 32842000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usb, USB, 48000000, 5);
+static DEFINE_PXA2_CKEN(pxa27x_mmc, MMC, 19500000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ficp, FICP, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ac97, AC97, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_msl, MSL, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usim, USIM, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_im, IM, 0, 0);
+static DEFINE_PXA2_CKEN(pxa27x_memc, MEMC, 0, 0);
+
+static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops);
+static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops);
+static DEFINE_CLK(pxa27x_mem, &clk_pxa27x_mem_ops, 0, 0);
+
+static struct clk_lookup pxa27x_clkregs[] = {
+ INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL),
+ INIT_CLKREG(&clk_pxa27x_camera, "pxa27x-camera.0", NULL),
+ INIT_CLKREG(&clk_pxa27x_ffuart, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_pxa27x_btuart, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-uart.2", NULL),
+ INIT_CLKREG(&clk_pxa27x_i2s, "pxa2xx-i2s", NULL),
+ INIT_CLKREG(&clk_pxa27x_i2c, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_pxa27x_usb, "pxa27x-udc", NULL),
+ INIT_CLKREG(&clk_pxa27x_mmc, "pxa2xx-mci.0", NULL),
+ INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-ir", "UARTCLK"),
+ INIT_CLKREG(&clk_pxa27x_ficp, "pxa2xx-ir", "FICPCLK"),
+ INIT_CLKREG(&clk_pxa27x_usbhost, "pxa27x-ohci", NULL),
+ INIT_CLKREG(&clk_pxa27x_pwri2c, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_pxa27x_keypad, "pxa27x-keypad", NULL),
+ INIT_CLKREG(&clk_pxa27x_ssp1, "pxa27x-ssp.0", NULL),
+ INIT_CLKREG(&clk_pxa27x_ssp2, "pxa27x-ssp.1", NULL),
+ INIT_CLKREG(&clk_pxa27x_ssp3, "pxa27x-ssp.2", NULL),
+ INIT_CLKREG(&clk_pxa27x_pwm0, "pxa27x-pwm.0", NULL),
+ INIT_CLKREG(&clk_pxa27x_pwm1, "pxa27x-pwm.1", NULL),
+ INIT_CLKREG(&clk_pxa27x_ac97, NULL, "AC97CLK"),
+ INIT_CLKREG(&clk_pxa27x_ac97conf, NULL, "AC97CONFCLK"),
+ INIT_CLKREG(&clk_pxa27x_msl, NULL, "MSLCLK"),
+ INIT_CLKREG(&clk_pxa27x_usim, NULL, "USIMCLK"),
+ INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"),
+ INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
+ INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
+ INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+ INIT_CLKREG(&clk_dummy, "pxa27x-gpio", NULL),
+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
+};
+
#ifdef CONFIG_PM
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
@@ -293,6 +460,8 @@
reset_status = RCSR;
+ clkdev_add_table(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
+
if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
@@ -300,17 +469,10 @@
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
+ register_syscore_ops(&pxa2xx_clock_syscore_ops);
- if (!of_have_populated_dt()) {
- ret = clk_register_clkdev(NULL, NULL,
- "pxa27x-gpio");
- if (!ret)
- pxa_register_device(&pxa27x_device_gpio,
- &pxa27x_gpio_info);
- if (!ret)
- ret = platform_add_devices(devices,
- ARRAY_SIZE(devices));
- }
+ pxa_register_device(&pxa27x_device_gpio, &pxa27x_gpio_info);
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
return ret;