[PATCH] e1000: Added variable to handle return values for pci_enable_* functions
This was to fix compilation warnings. Also added log messages when pci_enable_* functions return with an error.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 75cd6df..8207db4 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -4382,6 +4382,7 @@
struct e1000_adapter *adapter = netdev_priv(netdev);
uint32_t ctrl, ctrl_ext, rctl, manc, status;
uint32_t wufc = adapter->wol;
+ int retval = 0;
netif_device_detach(netdev);
@@ -4427,13 +4428,21 @@
E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
- pci_enable_wake(pdev, 3, 1);
- pci_enable_wake(pdev, 4, 1); /* 4 == D3 cold */
+ retval = pci_enable_wake(pdev, PCI_D3hot, 1);
+ if (retval)
+ DPRINTK(PROBE, ERR, "Error enabling D3 wake\n");
+ retval = pci_enable_wake(pdev, PCI_D3cold, 1);
+ if (retval)
+ DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n");
} else {
E1000_WRITE_REG(&adapter->hw, WUC, 0);
E1000_WRITE_REG(&adapter->hw, WUFC, 0);
- pci_enable_wake(pdev, 3, 0);
- pci_enable_wake(pdev, 4, 0); /* 4 == D3 cold */
+ retval = pci_enable_wake(pdev, PCI_D3hot, 0);
+ if (retval)
+ DPRINTK(PROBE, ERR, "Error enabling D3 wake\n");
+ retval = pci_enable_wake(pdev, PCI_D3cold, 0); /* 4 == D3 cold */
+ if (retval)
+ DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n");
}
pci_save_state(pdev);
@@ -4444,8 +4453,12 @@
if(manc & E1000_MANC_SMBUS_EN) {
manc |= E1000_MANC_ARP_EN;
E1000_WRITE_REG(&adapter->hw, MANC, manc);
- pci_enable_wake(pdev, 3, 1);
- pci_enable_wake(pdev, 4, 1); /* 4 == D3 cold */
+ retval = pci_enable_wake(pdev, PCI_D3hot, 1);
+ if (retval)
+ DPRINTK(PROBE, ERR, "Error enabling D3 wake\n");
+ retval = pci_enable_wake(pdev, PCI_D3cold, 1);
+ if (retval)
+ DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n");
}
}
@@ -4454,7 +4467,10 @@
e1000_release_hw_control(adapter);
pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ retval = pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ if (retval)
+ DPRINTK(PROBE, ERR, "Error in setting power state\n");
return 0;
}
@@ -4464,15 +4480,21 @@
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
+ int retval;
uint32_t manc, ret_val;
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
+ retval = pci_set_power_state(pdev, PCI_D0);
+ if (retval)
+ DPRINTK(PROBE, ERR, "Error in setting power state\n");
ret_val = pci_enable_device(pdev);
pci_set_master(pdev);
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
+ retval = pci_enable_wake(pdev, PCI_D3hot, 0);
+ if (retval)
+ DPRINTK(PROBE, ERR, "Error enabling D3 wake\n");
+ retval = pci_enable_wake(pdev, PCI_D3cold, 0);
+ if (retval)
+ DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n");
e1000_reset(adapter);
E1000_WRITE_REG(&adapter->hw, WUS, ~0);