| /* Copyright (c) 2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "smb1355.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| /{ |
| bluetooth: bt_wcn3990 { |
| compatible = "qca,wcn3990"; |
| qca,bt-vdd-io-supply = <&pm8998_s3>; |
| qca,bt-vdd-xtal-supply = <&pm8998_s5>; |
| qca,bt-vdd-core-supply = <&pm8998_l7>; |
| qca,bt-vdd-pa-supply = <&pm8998_l17>; |
| qca,bt-vdd-ldo-supply = <&pm8998_l25>; |
| |
| qca,bt-vdd-io-voltage-level = <1352000 1352000>; |
| qca,bt-vdd-xtal-voltage-level = <2040000 2040000>; |
| qca,bt-vdd-core-voltage-level = <1800000 1800000>; |
| qca,bt-vdd-pa-voltage-level = <1304000 1304000>; |
| qca,bt-vdd-ldo-voltage-level = <3312000 3312000>; |
| |
| qca,bt-vdd-io-current-level = <1>; /* LPM/PFM */ |
| qca,bt-vdd-xtal-current-level = <1>; /* LPM/PFM */ |
| qca,bt-vdd-core-current-level = <1>; /* LPM/PFM */ |
| qca,bt-vdd-pa-current-level = <1>; /* LPM/PFM */ |
| qca,bt-vdd-ldo-current-level = <1>; /* LPM/PFM */ |
| }; |
| |
| qrd_batterydata: qcom,battery-data { |
| qcom,batt-id-range-pct = <15>; |
| #include "fg-gen3-batterydata-itech-3000mah.dtsi" |
| #include "fg-gen3-batterydata-ascent-3450mah.dtsi" |
| }; |
| |
| aliases { |
| serial0 = &qupv3_se9_2uart; |
| spi0 = &qupv3_se8_spi; |
| i2c0 = &qupv3_se10_i2c; |
| i2c1 = &qupv3_se3_i2c; |
| hsuart0 = &qupv3_se6_4uart; |
| }; |
| }; |
| |
| &qupv3_se9_2uart { |
| status = "ok"; |
| }; |
| |
| &qupv3_se8_spi { |
| status = "ok"; |
| }; |
| |
| &qupv3_se3_i2c { |
| status = "ok"; |
| nq@28 { |
| compatible = "qcom,nq-nci"; |
| reg = <0x28>; |
| qcom,nq-irq = <&tlmm 63 0x00>; |
| qcom,nq-ven = <&tlmm 12 0x00>; |
| qcom,nq-firm = <&tlmm 62 0x00>; |
| qcom,nq-clkreq = <&pm8998_gpios 21 0x00>; |
| qcom,nq-esepwr = <&tlmm 116 0x00>; |
| interrupt-parent = <&tlmm>; |
| qcom,clk-src = "BBCLK3"; |
| interrupts = <63 0>; |
| interrupt-names = "nfc_irq"; |
| pinctrl-names = "nfc_active", "nfc_suspend"; |
| pinctrl-0 = <&nfc_int_active |
| &nfc_enable_active |
| &nfc_clk_default>; |
| pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>; |
| clocks = <&clock_rpmh RPMH_LN_BB_CLK3>; |
| clock-names = "ref_clk"; |
| }; |
| }; |
| |
| &qupv3_se10_i2c { |
| status = "ok"; |
| }; |
| |
| &qupv3_se6_4uart { |
| status = "ok"; |
| }; |
| |
| &pmi8998_fg { |
| qcom,battery-data = <&qrd_batterydata>; |
| }; |
| |
| &smb1355_charger { |
| status = "ok"; |
| }; |
| |
| &mdss_mdp { |
| #cooling-cells = <2>; |
| }; |
| |
| &soc { |
| sound-tavil { |
| qcom,wsa-max-devs = <1>; |
| qcom,wsa-devs = <&wsa881x_0211>, <&wsa881x_0213>; |
| qcom,wsa-aux-dev-prefix = "SpkrRight", "SpkrRight"; |
| |
| qcom,msm-mbhc-usbc-audio-supported = <1>; |
| |
| qcom,usbc-analog-en2-gpio = <&tlmm 51 0>; |
| pinctrl-names = "aud_active", "aud_sleep"; |
| pinctrl-0 = <&wcd_usbc_analog_en2_active>; |
| pinctrl-1 = <&wcd_usbc_analog_en2_idle>; |
| }; |
| }; |
| |
| &wcd934x_cdc { |
| wcd: wcd_pinctrl@5 { |
| us_euro_sw_wcd_active: us_euro_sw_wcd_active { |
| mux { |
| pins = "gpio1"; |
| }; |
| |
| config { |
| pins = "gpio1"; |
| /delete-property/ output-high; |
| bias-high-impedance; |
| }; |
| }; |
| |
| us_euro_sw_wcd_sleep: us_euro_sw_wcd_sleep { |
| mux { |
| pins = "gpio1"; |
| }; |
| |
| config { |
| pins = "gpio1"; |
| /delete-property/ output-low; |
| bias-high-impedance; |
| }; |
| }; |
| }; |
| }; |
| |
| &ufsphy_mem { |
| compatible = "qcom,ufs-phy-qmp-v3"; |
| |
| vdda-phy-supply = <&pm8998_l1>; /* 0.88v */ |
| vdda-pll-supply = <&pm8998_l26>; /* 1.2v */ |
| vdda-phy-max-microamp = <62900>; |
| vdda-pll-max-microamp = <18300>; |
| |
| status = "ok"; |
| }; |
| |
| &ufshc_mem { |
| vdd-hba-supply = <&ufs_phy_gdsc>; |
| vdd-hba-fixed-regulator; |
| vcc-supply = <&pm8998_l20>; |
| vccq2-supply = <&pm8998_s4>; |
| vcc-max-microamp = <600000>; |
| vccq2-max-microamp = <600000>; |
| |
| qcom,vddp-ref-clk-supply = <&pm8998_l2>; |
| qcom,vddp-ref-clk-max-microamp = <100>; |
| |
| status = "ok"; |
| }; |
| |
| &extcon_storage_cd { |
| gpio = <&tlmm 126 GPIO_ACTIVE_LOW>; |
| debounce-ms = <200>; |
| irq-flags = <IRQ_TYPE_EDGE_BOTH>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&storage_cd>; |
| |
| status = "ok"; |
| }; |
| |
| &ufsphy_card { |
| compatible = "qcom,ufs-phy-qmp-v3"; |
| |
| vdda-phy-supply = <&pm8998_l1>; /* 0.88v */ |
| vdda-pll-supply = <&pm8998_l26>; /* 1.2v */ |
| vdda-phy-max-microamp = <62900>; |
| vdda-pll-max-microamp = <18300>; |
| |
| status = "ok"; |
| }; |
| |
| &ufshc_card { |
| vdd-hba-supply = <&ufs_card_gdsc>; |
| vdd-hba-fixed-regulator; |
| vcc-supply = <&pm8998_l21>; |
| vccq2-supply = <&pm8998_s4>; |
| vcc-max-microamp = <300000>; |
| vccq2-max-microamp = <300000>; |
| |
| qcom,vddp-ref-clk-supply = <&pm8998_l2>; |
| qcom,vddp-ref-clk-max-microamp = <100>; |
| |
| extcon = <&extcon_storage_cd>; |
| |
| status = "ok"; |
| }; |
| |
| &sdhc_2 { |
| vdd-supply = <&pm8998_l21>; |
| qcom,vdd-voltage-level = <2950000 2960000>; |
| qcom,vdd-current-level = <200 800000>; |
| |
| vdd-io-supply = <&pm8998_l13>; |
| qcom,vdd-io-voltage-level = <1808000 2960000>; |
| qcom,vdd-io-current-level = <200 22000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; |
| pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; |
| |
| qcom,clk-rates = <400000 20000000 25000000 |
| 50000000 100000000 200000000>; |
| qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; |
| |
| extcon = <&extcon_storage_cd>; |
| |
| status = "ok"; |
| }; |
| |
| &labibb { |
| status = "ok"; |
| qcom,qpnp-labibb-mode = "lcd"; |
| }; |
| |
| &pmi8998_wled { |
| status = "okay"; |
| qcom,led-strings-list = [01 02]; |
| }; |
| |
| &mdss_mdp { |
| connectors = <&sde_rscc &sde_wb>; |
| }; |
| |
| &dsi_sharp_4k_dsc_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "dual_port"; |
| qcom,panel-mode-gpio = <&tlmm 52 0>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| qcom,mdss-dsi-panel-orientation = "180"; |
| }; |
| |
| &dsi_sharp_4k_dsc_video_display { |
| qcom,dsi-display-active; |
| }; |
| |
| &wil6210 { |
| status = "ok"; |
| }; |
| |
| &ext_5v_boost { |
| status = "ok"; |
| }; |