snd/hda: add runtime suspend/resume on optimus support (v4)

Add support for HDMI audio device on VGA cards that powerdown
to D3cold using non-standard ACPI/PCI infrastructure (optimus).

This does a couple of things to make it work:

a) add a set of power ops for the hdmi domain, and enables them
via vga_switcheroo when we are a switcheroo controlled card. This
just replaces the runtime resume operation so that when the card
is in D3cold the userspace pci config space access via sysfs,
the vga switcheroon runtime resume gets called first and it calls
the GPU resume callback before calling the sound card runtime
resume.

b) standard ACPI/PCI stacks won't put a device into D3cold without
an ACPI handle, but since the hdmi audio devices on gpus don't have
an ACPI handle, we need to manually force the device into D3cold
after suspend from the switcheroo path only.

c) don't try and do runtime s/r when the GPU is off.

d) call runtime suspend/resume during switcheroo suspend/resume
this is to make sure the runtime stack knows to try and resume
the hdmi audio device for pci config space access.

v2: fix incorrect runtime call suspend->resume.

v3: rework irq handler to avoid false irq when we are resuming
but haven't runtime resumed yet, don't bother trying D3cold,
it won't work, just set it manually ourselves, move runtime s/r
calls outside the main s/r hook. enable dnyamic pm properly by
dropping reference.

v4: put back irq handler check just wrap it with cap check

Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 8860dd52..bf5e58e 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -555,6 +555,9 @@
 #ifdef CONFIG_SND_HDA_DSP_LOADER
 	struct azx_dev saved_azx_dev;
 #endif
+
+	/* secondary power domain for hdmi audio under vga device */
+	struct dev_pm_domain hdmi_pm_domain;
 };
 
 #define CREATE_TRACE_POINTS
@@ -1397,8 +1400,9 @@
 	int i, ok;
 
 #ifdef CONFIG_PM_RUNTIME
-	if (chip->pci->dev.power.runtime_status != RPM_ACTIVE)
-		return IRQ_NONE;
+	if (chip->driver_caps & AZX_DCAPS_PM_RUNTIME)
+		if (chip->pci->dev.power.runtime_status != RPM_ACTIVE)
+			return IRQ_NONE;
 #endif
 
 	spin_lock(&chip->reg_lock);
@@ -1409,7 +1413,7 @@
 	}
 
 	status = azx_readl(chip, INTSTS);
-	if (status == 0) {
+	if (status == 0 || status == 0xffffffff) {
 		spin_unlock(&chip->reg_lock);
 		return IRQ_NONE;
 	}
@@ -2971,6 +2975,12 @@
 	struct snd_card *card = dev_get_drvdata(dev);
 	struct azx *chip = card->private_data;
 
+	if (chip->disabled)
+		return 0;
+
+	if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
+		return 0;
+
 	azx_stop_chip(chip);
 	azx_enter_link_reset(chip);
 	azx_clear_irq_pending(chip);
@@ -2984,6 +2994,12 @@
 	struct snd_card *card = dev_get_drvdata(dev);
 	struct azx *chip = card->private_data;
 
+	if (chip->disabled)
+		return 0;
+
+	if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
+		return 0;
+
 	if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
 		hda_display_power(true);
 	azx_init_pci(chip);
@@ -2996,6 +3012,9 @@
 	struct snd_card *card = dev_get_drvdata(dev);
 	struct azx *chip = card->private_data;
 
+	if (chip->disabled)
+		return 0;
+
 	if (!power_save_controller ||
 	    !(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
 		return -EBUSY;
@@ -3078,13 +3097,19 @@
 			   "%s: %s via VGA-switcheroo\n", pci_name(chip->pci),
 			   disabled ? "Disabling" : "Enabling");
 		if (disabled) {
+			pm_runtime_put_sync_suspend(&pci->dev);
 			azx_suspend(&pci->dev);
+			/* when we get suspended by vga switcheroo we end up in D3cold,
+			 * however we have no ACPI handle, so pci/acpi can't put us there,
+			 * put ourselves there */
+			pci->current_state = PCI_D3cold;
 			chip->disabled = true;
 			if (snd_hda_lock_devices(chip->bus))
 				snd_printk(KERN_WARNING SFX "%s: Cannot lock devices!\n",
 					   pci_name(chip->pci));
 		} else {
 			snd_hda_unlock_devices(chip->bus);
+			pm_runtime_get_noresume(&pci->dev);
 			chip->disabled = false;
 			azx_resume(&pci->dev);
 		}
@@ -3139,6 +3164,9 @@
 	if (err < 0)
 		return err;
 	chip->vga_switcheroo_registered = 1;
+
+	/* register as an optimus hdmi audio power domain */
+	vga_switcheroo_init_domain_pm_optimus_hdmi_audio(&chip->pci->dev, &chip->hdmi_pm_domain);
 	return 0;
 }
 #else
@@ -3887,7 +3915,7 @@
 	power_down_all_codecs(chip);
 	azx_notifier_register(chip);
 	azx_add_card_list(chip);
-	if (chip->driver_caps & AZX_DCAPS_PM_RUNTIME)
+	if ((chip->driver_caps & AZX_DCAPS_PM_RUNTIME) || chip->use_vga_switcheroo)
 		pm_runtime_put_noidle(&pci->dev);
 
 	return 0;