diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index d98bafc..385c262 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -71,6 +71,7 @@
 
 config IRQCHIP_DEMUX_GPIO
 	bool
+	depends on (BF53x || BF561)
 	default y
 
 source "init/Kconfig"
@@ -114,6 +115,26 @@
 	help
 	  BF537 Processor Support.
 
+config BF542
+	bool "BF542"
+	help
+	  BF542 Processor Support.
+
+config BF544
+	bool "BF544"
+	help
+	  BF544 Processor Support.
+
+config BF548
+	bool "BF548"
+	help
+	  BF548 Processor Support.
+
+config BF549
+	bool "BF549"
+	help
+	  BF549 Processor Support.
+
 config BF561
 	bool "BF561"
 	help
@@ -125,6 +146,11 @@
 	prompt "Silicon Rev"
 	default BF_REV_0_2 if BF537
 	default BF_REV_0_3 if BF533
+	default BF_REV_0_0 if BF549
+
+config BF_REV_0_0
+	bool "0.0"
+	depends on (BF549)
 
 config BF_REV_0_2
 	bool "0.2"
@@ -150,6 +176,16 @@
 
 endchoice
 
+config BF53x
+	bool
+	depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
+	default y
+
+config BF54x
+	bool
+	depends on (BF542 || BF544 || BF548 || BF549)
+	default y
+
 config BFIN_DUAL_CORE
 	bool
 	depends on (BF561)
@@ -198,6 +234,12 @@
 	help
 	  CM-BF537 support for EVAL- and DEV-Board.
 
+config BFIN548_EZKIT
+	bool "BF548-EZKIT"
+	depends on (BF548 || BF549)
+	  help
+	  BFIN548-EZKIT board Support.
+
 config BFIN561_BLUETECHNIX_CM
 	bool "Bluetechnix CM-BF561"
 	depends on (BF561)
@@ -265,6 +307,7 @@
 source "arch/blackfin/mach-bf533/Kconfig"
 source "arch/blackfin/mach-bf561/Kconfig"
 source "arch/blackfin/mach-bf537/Kconfig"
+source "arch/blackfin/mach-bf548/Kconfig"
 
 menu "Board customizations"
 
@@ -543,7 +586,7 @@
 
 config BFIN_DMA_5XX
 	bool "Enable DMA Support"
-	depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561)
+	depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561 || BF54x)
 	default y
 	help
 	  DMA driver for BF5xx.
@@ -839,7 +882,7 @@
 
 endmenu
 
-if (BF537 || BF533)
+if (BF537 || BF533 || BF54x)
 
 menu "CPU Frequency scaling"
 
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 6971a44..1b75672 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -24,6 +24,8 @@
 machine-$(CONFIG_BF534) := bf537
 machine-$(CONFIG_BF536) := bf537
 machine-$(CONFIG_BF537) := bf537
+machine-$(CONFIG_BF548) := bf548
+machine-$(CONFIG_BF549) := bf548
 machine-$(CONFIG_BF561) := bf561
 MACHINE := $(machine-y)
 export MACHINE
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index f3b7d2f..93d2140 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -6,9 +6,10 @@
 
 obj-y := \
 	entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
-	sys_bfin.o time.o traps.o irqchip.o dma-mapping.o bfin_gpio.o \
-	flat.o
+	sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o
 
+obj-$(CONFIG_BF53x)		     += bfin_gpio.o
+obj-$(CONFIG_BF561)		     += bfin_gpio.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_BFIN_DMA_5XX)           += bfin_dma_5xx.o
 obj-$(CONFIG_DUAL_CORE_TEST_MODULE)  += dualcore_test.o
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 069a896..8a16c2b 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -34,6 +34,7 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 
+#include <asm/blackfin.h>
 #include <asm/dma.h>
 #include <asm/cacheflush.h>
 
@@ -45,67 +46,6 @@
 ***************************************************************************/
 
 static struct dma_channel dma_ch[MAX_BLACKFIN_DMA_CHANNEL];
-#if defined (CONFIG_BF561)
-static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
-	(struct dma_register *) DMA1_0_NEXT_DESC_PTR,
-	(struct dma_register *) DMA1_1_NEXT_DESC_PTR,
-	(struct dma_register *) DMA1_2_NEXT_DESC_PTR,
-	(struct dma_register *) DMA1_3_NEXT_DESC_PTR,
-	(struct dma_register *) DMA1_4_NEXT_DESC_PTR,
-	(struct dma_register *) DMA1_5_NEXT_DESC_PTR,
-	(struct dma_register *) DMA1_6_NEXT_DESC_PTR,
-	(struct dma_register *) DMA1_7_NEXT_DESC_PTR,
-	(struct dma_register *) DMA1_8_NEXT_DESC_PTR,
-	(struct dma_register *) DMA1_9_NEXT_DESC_PTR,
-	(struct dma_register *) DMA1_10_NEXT_DESC_PTR,
-	(struct dma_register *) DMA1_11_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_0_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_1_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_2_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_3_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_4_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_5_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_6_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_7_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_8_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_9_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_10_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_11_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA1_D0_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA1_S0_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA1_D1_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA1_S1_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA2_D0_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA2_S0_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA2_D1_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA2_S1_NEXT_DESC_PTR,
-	(struct dma_register *) IMDMA_D0_NEXT_DESC_PTR,
-	(struct dma_register *) IMDMA_S0_NEXT_DESC_PTR,
-	(struct dma_register *) IMDMA_D1_NEXT_DESC_PTR,
-	(struct dma_register *) IMDMA_S1_NEXT_DESC_PTR,
-};
-#else
-static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
-	(struct dma_register *) DMA0_NEXT_DESC_PTR,
-	(struct dma_register *) DMA1_NEXT_DESC_PTR,
-	(struct dma_register *) DMA2_NEXT_DESC_PTR,
-	(struct dma_register *) DMA3_NEXT_DESC_PTR,
-	(struct dma_register *) DMA4_NEXT_DESC_PTR,
-	(struct dma_register *) DMA5_NEXT_DESC_PTR,
-	(struct dma_register *) DMA6_NEXT_DESC_PTR,
-	(struct dma_register *) DMA7_NEXT_DESC_PTR,
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536))
-	(struct dma_register *) DMA8_NEXT_DESC_PTR,
-	(struct dma_register *) DMA9_NEXT_DESC_PTR,
-	(struct dma_register *) DMA10_NEXT_DESC_PTR,
-	(struct dma_register *) DMA11_NEXT_DESC_PTR,
-#endif
-	(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
-	(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
-};
-#endif
 
 /*------------------------------------------------------------------------------
  *       Set the Buffer Clear bit in the Configuration register of specific DMA
@@ -138,149 +78,6 @@
 
 arch_initcall(blackfin_dma_init);
 
-/*
- *	Form the channel find the irq number for that channel.
- */
-#if !defined(CONFIG_BF561)
-
-static int bf533_channel2irq(unsigned int channel)
-{
-	int ret_irq = -1;
-
-	switch (channel) {
-	case CH_PPI:
-		ret_irq = IRQ_PPI;
-		break;
-
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536))
-	case CH_EMAC_RX:
-		ret_irq = IRQ_MAC_RX;
-		break;
-
-	case CH_EMAC_TX:
-		ret_irq = IRQ_MAC_TX;
-		break;
-
-	case CH_UART1_RX:
-		ret_irq = IRQ_UART1_RX;
-		break;
-
-	case CH_UART1_TX:
-		ret_irq = IRQ_UART1_TX;
-		break;
-#endif
-
-	case CH_SPORT0_RX:
-		ret_irq = IRQ_SPORT0_RX;
-		break;
-
-	case CH_SPORT0_TX:
-		ret_irq = IRQ_SPORT0_TX;
-		break;
-
-	case CH_SPORT1_RX:
-		ret_irq = IRQ_SPORT1_RX;
-		break;
-
-	case CH_SPORT1_TX:
-		ret_irq = IRQ_SPORT1_TX;
-		break;
-
-	case CH_SPI:
-		ret_irq = IRQ_SPI;
-		break;
-
-	case CH_UART_RX:
-		ret_irq = IRQ_UART_RX;
-		break;
-
-	case CH_UART_TX:
-		ret_irq = IRQ_UART_TX;
-		break;
-
-	case CH_MEM_STREAM0_SRC:
-	case CH_MEM_STREAM0_DEST:
-		ret_irq = IRQ_MEM_DMA0;
-		break;
-
-	case CH_MEM_STREAM1_SRC:
-	case CH_MEM_STREAM1_DEST:
-		ret_irq = IRQ_MEM_DMA1;
-		break;
-	}
-	return ret_irq;
-}
-
-# define channel2irq(channel) bf533_channel2irq(channel)
-
-#else
-
-static int bf561_channel2irq(unsigned int channel)
-{
-	int ret_irq = -1;
-
-	switch (channel) {
-	case CH_PPI0:
-		ret_irq = IRQ_PPI0;
-		break;
-	case CH_PPI1:
-		ret_irq = IRQ_PPI1;
-		break;
-	case CH_SPORT0_RX:
-		ret_irq = IRQ_SPORT0_RX;
-		break;
-	case CH_SPORT0_TX:
-		ret_irq = IRQ_SPORT0_TX;
-		break;
-	case CH_SPORT1_RX:
-		ret_irq = IRQ_SPORT1_RX;
-		break;
-	case CH_SPORT1_TX:
-		ret_irq = IRQ_SPORT1_TX;
-		break;
-	case CH_SPI:
-		ret_irq = IRQ_SPI;
-		break;
-	case CH_UART_RX:
-		ret_irq = IRQ_UART_RX;
-		break;
-	case CH_UART_TX:
-		ret_irq = IRQ_UART_TX;
-		break;
-
-	case CH_MEM_STREAM0_SRC:
-	case CH_MEM_STREAM0_DEST:
-		ret_irq = IRQ_MEM_DMA0;
-		break;
-	case CH_MEM_STREAM1_SRC:
-	case CH_MEM_STREAM1_DEST:
-		ret_irq = IRQ_MEM_DMA1;
-		break;
-	case CH_MEM_STREAM2_SRC:
-	case CH_MEM_STREAM2_DEST:
-		ret_irq = IRQ_MEM_DMA2;
-		break;
-	case CH_MEM_STREAM3_SRC:
-	case CH_MEM_STREAM3_DEST:
-		ret_irq = IRQ_MEM_DMA3;
-		break;
-
-	case CH_IMEM_STREAM0_SRC:
-	case CH_IMEM_STREAM0_DEST:
-		ret_irq = IRQ_IMEM_DMA0;
-		break;
-	case CH_IMEM_STREAM1_SRC:
-	case CH_IMEM_STREAM1_DEST:
-		ret_irq = IRQ_IMEM_DMA1;
-		break;
-	}
-	return ret_irq;
-}
-
-# define channel2irq(channel) bf561_channel2irq(channel)
-
-#endif
-
 /*------------------------------------------------------------------------------
  *	Request the specific DMA channel from the system.
  *-----------------------------------------------------------------------------*/
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 83060f9..76bf2ce 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -500,8 +500,9 @@
 					cplb_data[i].end,
 					SIZE_4M,
 					cplb_data[i].i_conf);
-		} else {
+		} else
 #endif
+		{
 			fill_cplbtab(t,
 					cplb_data[i].start,
 					a_start,
diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile
index 76d2c2b..0322546 100644
--- a/arch/blackfin/mach-bf533/Makefile
+++ b/arch/blackfin/mach-bf533/Makefile
@@ -4,6 +4,6 @@
 
 extra-y := head.o
 
-obj-y := ints-priority.o
+obj-y := ints-priority.o dma.o
 
 obj-$(CONFIG_CPU_FREQ_BF533) += cpu.o
diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c
new file mode 100644
index 0000000..c4e4054
--- /dev/null
+++ b/arch/blackfin/mach-bf533/dma.c
@@ -0,0 +1,95 @@
+/*
+ * File:         arch/blackfin/mach-bf533/dma.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+	(struct dma_register *) DMA0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA7_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+};
+
+int bf533_channel2irq(unsigned int channel)
+{
+	int ret_irq = -1;
+
+	switch (channel) {
+	case CH_PPI:
+		ret_irq = IRQ_PPI;
+		break;
+
+	case CH_SPORT0_RX:
+		ret_irq = IRQ_SPORT0_RX;
+		break;
+
+	case CH_SPORT0_TX:
+		ret_irq = IRQ_SPORT0_TX;
+		break;
+
+	case CH_SPORT1_RX:
+		ret_irq = IRQ_SPORT1_RX;
+		break;
+
+	case CH_SPORT1_TX:
+		ret_irq = IRQ_SPORT1_TX;
+		break;
+
+	case CH_SPI:
+		ret_irq = IRQ_SPI;
+		break;
+
+	case CH_UART_RX:
+		ret_irq = IRQ_UART_RX;
+		break;
+
+	case CH_UART_TX:
+		ret_irq = IRQ_UART_TX;
+		break;
+
+	case CH_MEM_STREAM0_SRC:
+	case CH_MEM_STREAM0_DEST:
+		ret_irq = IRQ_MEM_DMA0;
+		break;
+
+	case CH_MEM_STREAM1_SRC:
+	case CH_MEM_STREAM1_DEST:
+		ret_irq = IRQ_MEM_DMA1;
+		break;
+	}
+	return ret_irq;
+}
diff --git a/arch/blackfin/mach-bf537/Makefile b/arch/blackfin/mach-bf537/Makefile
index f32d442..7e7c9c8 100644
--- a/arch/blackfin/mach-bf537/Makefile
+++ b/arch/blackfin/mach-bf537/Makefile
@@ -4,6 +4,6 @@
 
 extra-y := head.o
 
-obj-y := ints-priority.o
+obj-y := ints-priority.o dma.o
 
 obj-$(CONFIG_CPU_FREQ)   += cpu.o
diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c
new file mode 100644
index 0000000..706cb97
--- /dev/null
+++ b/arch/blackfin/mach-bf537/dma.c
@@ -0,0 +1,115 @@
+/*
+ * File:         arch/blackfin/mach-bf537/dma.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+	(struct dma_register *) DMA0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA7_NEXT_DESC_PTR,
+	(struct dma_register *) DMA8_NEXT_DESC_PTR,
+	(struct dma_register *) DMA9_NEXT_DESC_PTR,
+	(struct dma_register *) DMA10_NEXT_DESC_PTR,
+	(struct dma_register *) DMA11_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+};
+
+int channel2irq(unsigned int channel)
+{
+	int ret_irq = -1;
+
+	switch (channel) {
+	case CH_PPI:
+		ret_irq = IRQ_PPI;
+		break;
+
+	case CH_EMAC_RX:
+		ret_irq = IRQ_MAC_RX;
+		break;
+
+	case CH_EMAC_TX:
+		ret_irq = IRQ_MAC_TX;
+		break;
+
+	case CH_UART1_RX:
+		ret_irq = IRQ_UART1_RX;
+		break;
+
+	case CH_UART1_TX:
+		ret_irq = IRQ_UART1_TX;
+		break;
+
+	case CH_SPORT0_RX:
+		ret_irq = IRQ_SPORT0_RX;
+		break;
+
+	case CH_SPORT0_TX:
+		ret_irq = IRQ_SPORT0_TX;
+		break;
+
+	case CH_SPORT1_RX:
+		ret_irq = IRQ_SPORT1_RX;
+		break;
+
+	case CH_SPORT1_TX:
+		ret_irq = IRQ_SPORT1_TX;
+		break;
+
+	case CH_SPI:
+		ret_irq = IRQ_SPI;
+		break;
+
+	case CH_UART_RX:
+		ret_irq = IRQ_UART_RX;
+		break;
+
+	case CH_UART_TX:
+		ret_irq = IRQ_UART_TX;
+		break;
+
+	case CH_MEM_STREAM0_SRC:
+	case CH_MEM_STREAM0_DEST:
+		ret_irq = IRQ_MEM_DMA0;
+		break;
+
+	case CH_MEM_STREAM1_SRC:
+	case CH_MEM_STREAM1_DEST:
+		ret_irq = IRQ_MEM_DMA1;
+		break;
+	}
+	return ret_irq;
+}
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig
new file mode 100644
index 0000000..b28625e
--- /dev/null
+++ b/arch/blackfin/mach-bf548/Kconfig
@@ -0,0 +1,282 @@
+if (BF54x)
+
+menu "BF548 Specific Configuration"
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+	int "IRQ_PLL_WAKEUP"
+	default 7
+config IRQ_DMAC0_ERR
+	int "IRQ_DMAC0_ERR"
+	default 7
+config IRQ_EPPI0_ERR
+	int "IRQ_EPPI0_ERR"
+	default 7
+config IRQ_SPORT0_ERR
+	int "IRQ_SPORT0_ERR"
+	default 7
+config IRQ_SPORT1_ERR
+	int "IRQ_SPORT1_ERR"
+	default 7
+config IRQ_SPI0_ERR
+	int "IRQ_SPI0_ERR"
+	default 7
+config IRQ_UART0_ERR
+	int "IRQ_UART0_ERR"
+	default 7
+config IRQ_RTC
+	int "IRQ_RTC"
+	default 8
+config IRQ_EPPI0
+	int "IRQ_EPPI0"
+	default 8
+config IRQ_SPORT0_RX
+	int "IRQ_SPORT0_RX"
+	default 9
+config IRQ_SPORT0_TX
+	int "IRQ_SPORT0_TX"
+	default 9
+config IRQ_SPORT1_RX
+	int "IRQ_SPORT1_RX"
+	default 9
+config IRQ_SPORT1_TX
+	int "IRQ_SPORT1_TX"
+	default 9
+config IRQ_SPI0
+	int "IRQ_SPI0"
+	default 10
+config IRQ_UART0_RX
+	int "IRQ_UART0_RX"
+	default 10
+config IRQ_UART0_TX
+	int "IRQ_UART0_TX"
+	default 10
+config IRQ_TIMER8
+	int "IRQ_TIMER8"
+	default 11
+config IRQ_TIMER9
+	int "IRQ_TIMER9"
+	default 11
+config IRQ_TIMER10
+	int "IRQ_TIMER10"
+	default 11
+config IRQ_PINT0
+	int "IRQ_PINT0"
+	default 12
+config IRQ_PINT1
+	int "IRQ_PINT0"
+	default 12
+config IRQ_MDMAS0
+	int "IRQ_MDMAS0"
+	default 13
+config IRQ_MDMAS1
+	int "IRQ_DMDMAS1"
+	default 13
+config IRQ_WATCHDOG
+	int "IRQ_WATCHDOG"
+	default 13
+config IRQ_DMAC1_ERR
+	int "IRQ_DMAC1_ERR"
+	default 7
+config IRQ_SPORT2_ERR
+	int "IRQ_SPORT2_ERR"
+	default 7
+config IRQ_SPORT3_ERR
+	int "IRQ_SPORT3_ERR"
+	default 7
+config IRQ_MXVR_DATA
+	int "IRQ MXVR Data"
+	default 7
+config IRQ_SPI1_ERR
+	int "IRQ_SPI1_ERR"
+	default 7
+config IRQ_SPI2_ERR
+	int "IRQ_SPI2_ERR"
+	default 7
+config IRQ_UART1_ERR
+	int "IRQ_UART1_ERR"
+	default 7
+config IRQ_UART2_ERR
+	int "IRQ_UART2_ERR"
+	default 7
+config IRQ_CAN0_ERR
+	int "IRQ_CAN0_ERR"
+	default 7
+config IRQ_SPORT2_RX
+	int "IRQ_SPORT2_RX"
+	default 9
+config IRQ_SPORT2_TX
+	int "IRQ_SPORT2_TX"
+	default 9
+config IRQ_SPORT3_RX
+	int "IRQ_SPORT3_RX"
+	default 9
+config IRQ_SPORT3_TX
+	int "IRQ_SPORT3_TX"
+	default 9
+config IRQ_EPPI1
+	int "IRQ_EPPI1"
+	default 9
+config IRQ_EPPI2
+	int "IRQ_EPPI2"
+	default 9
+config IRQ_SPI1
+	int "IRQ_SPI1"
+	default 10
+config IRQ_SPI2
+	int "IRQ_SPI2"
+	default 10
+config IRQ_UART1_RX
+	int "IRQ_UART1_RX"
+	default 10
+config IRQ_UART1_TX
+	int "IRQ_UART1_TX"
+	default 10
+config IRQ_ATAPI_RX
+	int "IRQ_ATAPI_RX"
+	default 10
+config IRQ_ATAPI_TX
+	int "IRQ_ATAPI_TX"
+	default 10
+config IRQ_TWI0
+	int "IRQ_TWI0"
+	default 11
+config IRQ_TWI1
+	int "IRQ_TWI1"
+	default 11
+config IRQ_CAN0_RX
+	int "IRQ_CAN_RX"
+	default 11
+config IRQ_CAN0_TX
+	int "IRQ_CAN_TX"
+	default 11
+config IRQ_MDMAS2
+	int "IRQ_MDMAS2"
+	default 13
+config IRQ_MDMAS3
+	int "IRQ_DMMAS3"
+	default 13
+config IRQ_MXVR_ERR
+	int "IRQ_MXVR_ERR"
+	default 11
+config IRQ_MXVR_MSG
+	int "IRQ_MXVR_MSG"
+	default 11
+config IRQ_MXVR_PKT
+	int "IRQ_MXVR_PKT"
+	default 11
+config IRQ_EPPI1_ERR
+	int "IRQ_EPPI1_ERR"
+	default 7
+config IRQ_EPPI2_ERR
+	int "IRQ_EPPI2_ERR"
+	default 7
+config IRQ_UART3_ERR
+	int "IRQ_UART3_ERR"
+	default 7
+config IRQ_HOST_ERR
+	int "IRQ_HOST_ERR"
+	default 7
+config IRQ_PIXC_ERR
+	int "IRQ_PIXC_ERR"
+	default 7
+config IRQ_NFC_ERR
+	int "IRQ_NFC_ERR"
+	default 7
+config IRQ_ATAPI_ERR
+	int "IRQ_ATAPI_ERR"
+	default 7
+config IRQ_CAN1_ERR
+	int "IRQ_CAN1_ERR"
+	default 7
+config IRQ_HS_DMA_ERR
+	int "IRQ Handshake DMA Status"
+	default 7
+config IRQ_PIXC_IN0
+	int "IRQ PIXC IN0"
+	default 8
+config IRQ_PIXC_IN1
+	int "IRQ PIXC IN1"
+	default 8
+config IRQ_PIXC_OUT
+	int "IRQ PIXC OUT"
+	default 8
+config IRQ_SDH
+	int "IRQ SDH"
+	default 8
+config IRQ_CNT
+	int "IRQ CNT"
+	default 8
+config IRQ_KEY
+	int "IRQ KEY"
+	default 8
+config IRQ_CAN1_RX
+	int "IRQ CAN1 RX"
+	default 11
+config IRQ_CAN1_TX
+	int "IRQ_CAN1_TX"
+	default 11
+config IRQ_SDH_MASK0
+	int "IRQ_SDH_MASK0"
+	default 11
+config IRQ_SDH_MASK1
+	int "IRQ_SDH_MASK1"
+	default 11
+config IRQ_USB_INT0
+	int "IRQ USB INT0"
+	default 11
+config IRQ_USB_INT1
+	int "IRQ USB INT1"
+	default 11
+config IRQ_USB_INT2
+	int "IRQ USB INT2"
+	default 11
+config IRQ_USB_DMA
+	int "IRQ USB DMA"
+	default 11
+config IRQ_OTPSEC
+	int "IRQ OPTSEC"
+	default 11
+config IRQ_TIMER0
+	int "IRQ_TIMER0"
+	default 11
+config IRQ_TIMER1
+	int "IRQ_TIMER1"
+	default 11
+config IRQ_TIMER2
+	int "IRQ_TIMER2"
+	default 11
+config IRQ_TIMER3
+	int "IRQ_TIMER3"
+	default 11
+config IRQ_TIMER4
+	int "IRQ_TIMER4"
+	default 11
+config IRQ_TIMER5
+	int "IRQ_TIMER5"
+	default 11
+config IRQ_TIMER6
+	int "IRQ_TIMER6"
+	default 11
+config IRQ_TIMER7
+	int "IRQ_TIMER7"
+	default 11
+config IRQ_PINT2
+	int "IRQ_PIN2"
+	default 11
+config IRQ_PINT3
+	int "IRQ_PIN3"
+	default 11
+
+	help
+	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
+	  This applies to all the above.  It is not recommended to assign the
+	  highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/arch/blackfin/mach-bf548/Makefile b/arch/blackfin/mach-bf548/Makefile
new file mode 100644
index 0000000..060ad78
--- /dev/null
+++ b/arch/blackfin/mach-bf548/Makefile
@@ -0,0 +1,9 @@
+#
+# arch/blackfin/mach-bf537/Makefile
+#
+
+extra-y := head.o
+
+obj-y := ints-priority.o dma.o gpio.o
+
+obj-$(CONFIG_CPU_FREQ)   += cpu.o
diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile
new file mode 100644
index 0000000..486e07c
--- /dev/null
+++ b/arch/blackfin/mach-bf548/boards/Makefile
@@ -0,0 +1,5 @@
+#
+# arch/blackfin/mach-bf548/boards/Makefile
+#
+
+obj-$(CONFIG_BFIN548_EZKIT)		+= ezkit.o led.o
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
new file mode 100644
index 0000000..100379c
--- /dev/null
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -0,0 +1,114 @@
+/*
+ * File:         arch/blackfin/mach-bf548/boards/ezkit.c
+ * Based on:     arch/blackfin/mach-bf537/boards/ezkit.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <asm/irq.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "ADSP-BF548-EZKIT";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	{
+		.start = 0xFFC02100,
+		.end = 0xFFC021FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	{
+		.start = 0xFFC03100,
+		.end = 0xFFC031FF,
+	},
+#endif
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+static struct platform_device *ezkit_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+};
+
+static int __init stamp_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+	return 0;
+}
+
+arch_initcall(stamp_init);
diff --git a/arch/blackfin/mach-bf548/boards/led.S b/arch/blackfin/mach-bf548/boards/led.S
new file mode 100644
index 0000000..f47daf3
--- /dev/null
+++ b/arch/blackfin/mach-bf548/boards/led.S
@@ -0,0 +1,172 @@
+/****************************************************
+ * LED1 ---- PG6        LED2 ---- PG7               *
+ * LED3 ---- PG8        LED4 ---- PG9               *
+ * LED5 ---- PG10       LED6 ---- PG11              *
+ ****************************************************/
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+
+/* All functions in this file save the registers they uses.
+   So there is no need to save any registers before calling them.  */
+
+	.text;
+
+/* Initialize LEDs.  */
+
+ENTRY(_led_init)
+	LINK 0;
+	[--SP] = P0;
+	[--SP] = R0;
+	[--SP] = R1;
+	[--SP] = R2;
+	R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z);
+	R2 = ~R1;
+
+	P0.H = hi(PORTG_FER);
+	P0.L = lo(PORTG_FER);
+	R0 = W[P0](Z);
+	SSYNC;
+	R0 = R0 & R2;
+	W[P0] = R0.L;
+	SSYNC;
+
+	P0.H = hi(PORTG_DIR_SET);
+	P0.L = lo(PORTG_DIR_SET);
+	W[P0] = R1.L;
+	SSYNC;
+
+	P0.H = hi(PORTG_INEN);
+	P0.L = lo(PORTG_INEN);
+	R0 = W[P0](Z);
+	SSYNC;
+	R0 = R0 & R2;
+	W[P0] = R0.L;
+	SSYNC;
+
+	R2 = [SP++];
+	R1 = [SP++];
+	R0 = [SP++];
+	P0 = [SP++];
+	RTS;
+	.size	_led_init, .-_led_init
+
+/* Set one LED on. Leave other LEDs unchanged.
+   It expects the LED number passed through R0.  */
+
+ENTRY(_led_on)
+	LINK 0;
+	[--SP] = P0;
+	[--SP] = R1;
+	CALL _led_init;
+	R1 = 1;
+	R0 += 5;
+	R1 <<= R0;
+	P0.H = hi(PORTG_SET);
+	P0.L = lo(PORTG_SET);
+	W[P0] = R1.L;
+	SSYNC;
+	R1 = [SP++];
+	P0 = [SP++];
+	UNLINK;
+	RTS;
+	.size	_led_on, .-_led_on
+
+/* Set one LED off. Leave other LEDs unchanged.  */
+
+ENTRY(_led_off)
+	LINK 0;
+	[--SP] = P0;
+	[--SP] = R1;
+	CALL _led_init;
+	R1 = 1;
+	R0 += 5;
+	R1 <<= R0;
+	P0.H = hi(PORTG_CLEAR);
+	P0.L = lo(PORTG_CLEAR);
+	W[P0] = R1.L;
+	SSYNC;
+	R1 = [SP++];
+	P0 = [SP++];
+	UNLINK;
+	RTS;
+	.size	_led_off, .-_led_off
+
+/* Toggle one LED. Leave other LEDs unchanged.  */
+
+ENTRY(_led_toggle)
+	LINK 0;
+	[--SP] = P0;
+	[--SP] = R1;
+	CALL _led_init;
+	R1 = 1;
+	R0 += 5;
+	R1 <<= R0;
+	P0.H = hi(PORTG);
+	P0.L = lo(PORTG);
+	R0 = W[P0](Z);
+	SSYNC;
+	R0 = R0 ^ R1;
+	W[P0] = R0.L;
+	SSYNC;
+	R1 = [SP++];
+	P0 = [SP++];
+	UNLINK;
+	RTS;
+	.size	_led_toggle, .-_led_toggle
+
+/* Display the number using LEDs in binary format.  */
+
+ENTRY(_led_disp_num)
+	LINK 0;
+	[--SP] = P0;
+	[--SP] = R1;
+	[--SP] = R2;
+	CALL _led_init;
+	R1 = 0x3f(X);
+	R0 = R0 & R1;
+	R2 = 6(X);
+	R0 <<= R2;
+	R1 <<= R2;
+	P0.H = hi(PORTG);
+	P0.L = lo(PORTG);
+	R2 = W[P0](Z);
+	SSYNC;
+	R1 = ~R1;
+	R2 = R2 & R1;
+	R2 = R2 | R0;
+	W[P0] = R2.L;
+	SSYNC;
+	R2 = [SP++];
+	R1 = [SP++];
+	P0 = [SP++];
+	UNLINK;
+	RTS;
+	.size	_led_disp_num, .-_led_disp_num
+
+/* Toggle the number using LEDs in binary format.  */
+
+ENTRY(_led_toggle_num)
+	LINK 0;
+	[--SP] = P0;
+	[--SP] = R1;
+	[--SP] = R2;
+	CALL _led_init;
+	R1 = 0x3f(X);
+	R0 = R0 & R1;
+	R1 = 6(X);
+	R0 <<= R1;
+	P0.H = hi(PORTG);
+	P0.L = lo(PORTG);
+	R1 = W[P0](Z);
+	SSYNC;
+	R1 = R1 ^ R0;
+	W[P0] = R1.L;
+	SSYNC;
+	R2 = [SP++];
+	R1 = [SP++];
+	P0 = [SP++];
+	UNLINK;
+	RTS;
+	.size	_led_toggle_num, .-_led_toggle_num
+
diff --git a/arch/blackfin/mach-bf548/cpu.c b/arch/blackfin/mach-bf548/cpu.c
new file mode 100644
index 0000000..4298a3c
--- /dev/null
+++ b/arch/blackfin/mach-bf548/cpu.c
@@ -0,0 +1,159 @@
+/*
+ * File:         arch/blackfin/mach-bf548/cpu.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  clock scaling for the bf54x
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <asm/dpmc.h>
+#include <linux/fs.h>
+#include <asm/bfin-global.h>
+
+/* CONFIG_CLKIN_HZ=25000000 */
+#define VCO5 (CONFIG_CLKIN_HZ*45)
+#define VCO4 (CONFIG_CLKIN_HZ*36)
+#define VCO3 (CONFIG_CLKIN_HZ*27)
+#define VCO2 (CONFIG_CLKIN_HZ*18)
+#define VCO1 (CONFIG_CLKIN_HZ*9)
+#define VCO(x) VCO##x
+
+#define MFREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)}
+/* frequency */
+static struct cpufreq_frequency_table bf548_freq_table[] = {
+	MFREQ(1),
+	MFREQ(3),
+	{VCO4, VCO4 / 2}, {VCO4, VCO4},
+	MFREQ(5),
+	{0, CPUFREQ_TABLE_END},
+};
+
+/*
+ * dpmc_fops->ioctl()
+ * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+ */
+static int bf548_getfreq(unsigned int cpu)
+{
+	unsigned long cclk_mhz;
+
+	/* The driver only support single cpu */
+	if (cpu == 0)
+		dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz);
+	else
+		cclk_mhz = -1;
+
+	return cclk_mhz;
+}
+
+static int bf548_target(struct cpufreq_policy *policy,
+			    unsigned int target_freq, unsigned int relation)
+{
+	unsigned long cclk_mhz;
+	unsigned long vco_mhz;
+	unsigned long flags;
+	unsigned int index;
+	struct cpufreq_freqs freqs;
+
+	if (cpufreq_frequency_table_target(policy, bf548_freq_table, target_freq, relation, &index))
+		return -EINVAL;
+
+	cclk_mhz = bf548_freq_table[index].frequency;
+	vco_mhz = bf548_freq_table[index].index;
+
+	dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz);
+	freqs.old = bf548_getfreq(0);
+	freqs.new = cclk_mhz;
+	freqs.cpu = 0;
+
+	pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n",
+	         cclk_mhz, vco_mhz, index, target_freq, freqs.old);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	local_irq_save(flags);
+	dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz);
+	local_irq_restore(flags);
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	vco_mhz = get_vco();
+	cclk_mhz = get_cclk();
+	return 0;
+}
+
+/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
+ * this platform, anyway.
+ */
+static int bf548_verify_speed(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &bf548_freq_table);
+}
+
+static int __init __bf548_cpu_init(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	/*Now ,only support one cpu */
+	policy->cur = bf548_getfreq(0);
+	cpufreq_frequency_table_get_attr(bf548_freq_table, policy->cpu);
+	return cpufreq_frequency_table_cpuinfo(policy, bf548_freq_table);
+}
+
+static struct freq_attr *bf548_freq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver bf548_driver = {
+	.verify = bf548_verify_speed,
+	.target = bf548_target,
+	.get = bf548_getfreq,
+	.init = __bf548_cpu_init,
+	.name = "bf548",
+	.owner = THIS_MODULE,
+	.attr = bf548_freq_attr,
+};
+
+static int __init bf548_cpu_init(void)
+{
+	return cpufreq_register_driver(&bf548_driver);
+}
+
+static void __exit bf548_cpu_exit(void)
+{
+	cpufreq_unregister_driver(&bf548_driver);
+}
+
+MODULE_AUTHOR("Mickael Kang");
+MODULE_DESCRIPTION("cpufreq driver for BF548 CPU");
+MODULE_LICENSE("GPL");
+
+module_init(bf548_cpu_init);
+module_exit(bf548_cpu_exit);
diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c
new file mode 100644
index 0000000..a818411
--- /dev/null
+++ b/arch/blackfin/mach-bf548/dma.c
@@ -0,0 +1,156 @@
+/*
+ * File:         arch/blackfin/mach-bf561/dma.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+ struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+	(struct dma_register *) DMA0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA7_NEXT_DESC_PTR,
+	(struct dma_register *) DMA8_NEXT_DESC_PTR,
+	(struct dma_register *) DMA9_NEXT_DESC_PTR,
+	(struct dma_register *) DMA10_NEXT_DESC_PTR,
+	(struct dma_register *) DMA11_NEXT_DESC_PTR,
+	(struct dma_register *) DMA12_NEXT_DESC_PTR,
+	(struct dma_register *) DMA13_NEXT_DESC_PTR,
+	(struct dma_register *) DMA14_NEXT_DESC_PTR,
+	(struct dma_register *) DMA15_NEXT_DESC_PTR,
+	(struct dma_register *) DMA16_NEXT_DESC_PTR,
+	(struct dma_register *) DMA17_NEXT_DESC_PTR,
+	(struct dma_register *) DMA18_NEXT_DESC_PTR,
+	(struct dma_register *) DMA19_NEXT_DESC_PTR,
+	(struct dma_register *) DMA20_NEXT_DESC_PTR,
+	(struct dma_register *) DMA21_NEXT_DESC_PTR,
+	(struct dma_register *) DMA22_NEXT_DESC_PTR,
+	(struct dma_register *) DMA23_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D2_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S2_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D3_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S3_NEXT_DESC_PTR,
+};
+
+int channel2irq(unsigned int channel)
+{
+	int ret_irq = -1;
+
+	switch (channel) {
+	case CH_SPORT0_RX:
+		ret_irq = IRQ_SPORT0_RX;
+		break;
+	case CH_SPORT0_TX:
+		ret_irq = IRQ_SPORT0_TX;
+		break;
+	case CH_SPORT1_RX:
+		ret_irq = IRQ_SPORT1_RX;
+		break;
+	case CH_SPORT1_TX:
+		ret_irq = IRQ_SPORT1_TX;
+	case CH_SPI0:
+		ret_irq = IRQ_SPI0;
+		break;
+	case CH_SPI1:
+		ret_irq = IRQ_SPI1;
+		break;
+	case CH_UART0_RX:
+		ret_irq = IRQ_UART_RX;
+		break;
+	case CH_UART0_TX:
+		ret_irq = IRQ_UART_TX;
+		break;
+	case CH_UART1_RX:
+		ret_irq = IRQ_UART_RX;
+		break;
+	case CH_UART1_TX:
+		ret_irq = IRQ_UART_TX;
+		break;
+	case CH_EPPI0:
+		ret_irq = IRQ_EPPI0;
+		break;
+	case CH_EPPI1:
+		ret_irq = IRQ_EPPI1;
+		break;
+	case CH_EPPI2:
+		ret_irq = IRQ_EPPI2;
+		break;
+	case CH_PIXC_IMAGE:
+		ret_irq = IRQ_PIXC_IN0;
+		break;
+	case CH_PIXC_OVERLAY:
+		ret_irq = IRQ_PIXC_IN1;
+		break;
+	case CH_PIXC_OUTPUT:
+		ret_irq = IRQ_PIXC_OUT;
+		break;
+	case CH_SPORT2_RX:
+		ret_irq = IRQ_SPORT2_RX;
+		break;
+	case CH_SPORT2_TX:
+		ret_irq = IRQ_SPORT2_TX;
+		break;
+	case CH_SPORT3_RX:
+		ret_irq = IRQ_SPORT3_RX;
+		break;
+	case CH_SPORT3_TX:
+		ret_irq = IRQ_SPORT3_TX;
+		break;
+	case CH_SDH:
+		ret_irq = IRQ_SDH;
+		break;
+	case CH_SPI2:
+		ret_irq = IRQ_SPI2;
+		break;
+	case CH_MEM_STREAM0_SRC:
+	case CH_MEM_STREAM0_DEST:
+		ret_irq = IRQ_MDMAS0;
+		break;
+	case CH_MEM_STREAM1_SRC:
+	case CH_MEM_STREAM1_DEST:
+		ret_irq = IRQ_MDMAS1;
+		break;
+	case CH_MEM_STREAM2_SRC:
+	case CH_MEM_STREAM2_DEST:
+		ret_irq = IRQ_MDMAS2;
+		break;
+	case CH_MEM_STREAM3_SRC:
+	case CH_MEM_STREAM3_DEST:
+		ret_irq = IRQ_MDMAS3;
+		break;
+	}
+	return ret_irq;
+}
diff --git a/arch/blackfin/mach-bf548/gpio.c b/arch/blackfin/mach-bf548/gpio.c
new file mode 100644
index 0000000..854896d
--- /dev/null
+++ b/arch/blackfin/mach-bf548/gpio.c
@@ -0,0 +1,175 @@
+/*
+ * File:         arch/blackfin/mach-bf548/gpio.c
+ * Based on:
+ * Author:       Michael Hennerich (hennerich@blackfin.uclinux.org)
+ *
+ * Created:
+ * Description:  GPIO Abstraction Layer
+ *
+ * Modified:
+ *               Copyright 2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <linux/irq.h>
+
+static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
+	(struct gpio_port_t *) PORTA_FER,
+	(struct gpio_port_t *) PORTB_FER,
+	(struct gpio_port_t *) PORTC_FER,
+	(struct gpio_port_t *) PORTD_FER,
+	(struct gpio_port_t *) PORTE_FER,
+	(struct gpio_port_t *) PORTF_FER,
+	(struct gpio_port_t *) PORTG_FER,
+	(struct gpio_port_t *) PORTH_FER,
+	(struct gpio_port_t *) PORTI_FER,
+	(struct gpio_port_t *) PORTJ_FER,
+};
+
+static unsigned short reserved_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+inline int check_gpio(unsigned short gpio)
+{
+	if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 \
+			|| gpio == GPIO_PH14 || gpio == GPIO_PH15 \
+			|| gpio > MAX_BLACKFIN_GPIOS)
+		return -EINVAL;
+	return 0;
+}
+
+static void port_setup(unsigned short gpio, unsigned short usage)
+{
+	if (usage == GPIO_USAGE) {
+		if (gpio_array[gpio_bank(gpio)]->port_fer & gpio_bit(gpio))
+			printk(KERN_WARNING "bfin-gpio: Possible Conflict with Peripheral "
+			       "usage and GPIO %d detected!\n", gpio);
+		gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
+	} else
+		gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
+	SSYNC();
+}
+
+static int __init bfin_gpio_init(void)
+{
+	int i;
+
+	printk(KERN_INFO "Blackfin GPIO Controller\n");
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE)
+		reserved_map[gpio_bank(i)] = 0;
+
+	return 0;
+}
+
+arch_initcall(bfin_gpio_init);
+
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin GPIO Driver
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: Blackfin GPIO Driver API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+int gpio_request(unsigned short gpio, const char *label)
+{
+	unsigned long flags;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	if (unlikely(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+		printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
+		dump_stack();
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+	reserved_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+
+	local_irq_restore(flags);
+
+	port_setup(gpio, GPIO_USAGE);
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+
+void gpio_free(unsigned short gpio)
+{
+	unsigned long flags;
+
+	if (check_gpio(gpio) < 0)
+		return;
+
+	local_irq_save(flags);
+
+	if (unlikely(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+		printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio);
+		dump_stack();
+		local_irq_restore(flags);
+		return;
+	}
+
+	reserved_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_free);
+
+
+void gpio_direction_input(unsigned short gpio)
+{
+	unsigned long flags;
+
+	BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+
+	local_irq_save(flags);
+	gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
+	gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+void gpio_direction_output(unsigned short gpio)
+{
+	unsigned long flags;
+
+	BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+
+	local_irq_save(flags);
+	gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio);
+	gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_direction_output);
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
new file mode 100644
index 0000000..0e1a254
--- /dev/null
+++ b/arch/blackfin/mach-bf548/head.S
@@ -0,0 +1,507 @@
+/*
+ * File:         arch/blackfin/mach-bf548/head.S
+ * Based on:     arch/blackfin/mach-bf537/head.S
+ * Author:       Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
+ *
+ * Created:      1998
+ * Description:  Startup code for Blackfin BF548
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach/mem_init.h>
+#endif
+
+.global __rambase
+.global __ramstart
+.global __ramend
+.extern ___bss_stop
+.extern ___bss_start
+.extern _bf53x_relocate_l1_mem
+
+#define INITIAL_STACK   0xFFB01000
+
+.text
+
+ENTRY(__start)
+ENTRY(__stext)
+	/* R0: argument of command line string, passed from uboot, save it */
+	R7 = R0;
+	/* Set the SYSCFG register */
+	R0 = 0x36;
+	SYSCFG = R0;   /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+	R0 = 0;
+
+	/* Clear Out All the data and pointer  Registers*/
+	R1 = R0;
+	R2 = R0;
+	R3 = R0;
+	R4 = R0;
+	R5 = R0;
+	R6 = R0;
+
+	P0 = R0;
+	P1 = R0;
+	P2 = R0;
+	P3 = R0;
+	P4 = R0;
+	P5 = R0;
+
+	LC0 = r0;
+	LC1 = r0;
+	L0 = r0;
+	L1 = r0;
+	L2 = r0;
+	L3 = r0;
+
+	/* Clear Out All the DAG Registers*/
+	B0 = r0;
+	B1 = r0;
+	B2 = r0;
+	B3 = r0;
+
+	I0 = r0;
+	I1 = r0;
+	I2 = r0;
+	I3 = r0;
+
+	M0 = r0;
+	M1 = r0;
+	M2 = r0;
+	M3 = r0;
+
+	/* Turn off the icache */
+	p0.l = (IMEM_CONTROL & 0xFFFF);
+	p0.h = (IMEM_CONTROL >> 16);
+	R1 = [p0];
+	R0 = ~ENICPLB;
+	R0 = R0 & R1;
+	[p0] = R0;
+	SSYNC;
+
+	/* Turn off the dcache */
+	p0.l = (DMEM_CONTROL & 0xFFFF);
+	p0.h = (DMEM_CONTROL >> 16);
+	R1 = [p0];
+	R0 = ~ENDCPLB;
+	R0 = R0 & R1;
+	[p0] = R0;
+	SSYNC;
+
+	/* Initialize stack pointer */
+	SP.L = LO(INITIAL_STACK);
+	SP.H = HI(INITIAL_STACK);
+	FP = SP;
+	USP = SP;
+
+	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+	call _bf53x_relocate_l1_mem;
+#if CONFIG_BFIN_KERNEL_CLOCK
+	call _start_dma_code;
+#endif
+	/* Code for initializing Async memory banks */
+
+	p2.h = hi(EBIU_AMBCTL1);
+	p2.l = lo(EBIU_AMBCTL1);
+	r0.h = hi(AMBCTL1VAL);
+	r0.l = lo(AMBCTL1VAL);
+	[p2] = r0;
+	ssync;
+
+	p2.h = hi(EBIU_AMBCTL0);
+	p2.l = lo(EBIU_AMBCTL0);
+	r0.h = hi(AMBCTL0VAL);
+	r0.l = lo(AMBCTL0VAL);
+	[p2] = r0;
+	ssync;
+
+	p2.h = hi(EBIU_AMGCTL);
+	p2.l = lo(EBIU_AMGCTL);
+	r0 = AMGCTLVAL;
+	w[p2] = r0;
+	ssync;
+
+	/* This section keeps the processor in supervisor mode
+	 * during kernel boot.  Switches to user mode at end of boot.
+	 * See page 3-9 of Hardware Reference manual for documentation.
+	 */
+
+	/* EVT15 = _real_start */
+
+	p0.l = lo(EVT15);
+	p0.h = hi(EVT15);
+	p1.l = _real_start;
+	p1.h = _real_start;
+	[p0] = p1;
+	csync;
+
+	p0.l = lo(IMASK);
+	p0.h = hi(IMASK);
+	p1.l = IMASK_IVG15;
+	p1.h = 0x0;
+	[p0] = p1;
+	csync;
+
+	raise 15;
+	p0.l = .LWAIT_HERE;
+	p0.h = .LWAIT_HERE;
+	reti = p0;
+#if defined (ANOMALY_05000281)
+	nop;
+	nop;
+	nop;
+#endif
+	rti;
+
+.LWAIT_HERE:
+	jump .LWAIT_HERE;
+
+ENTRY(_real_start)
+	[ -- sp ] = reti;
+	p0.l = lo(WDOG_CTL);
+	p0.h = hi(WDOG_CTL);
+	r0 = 0xAD6(z);
+	w[p0] = r0;	/* watchdog off for now */
+	ssync;
+
+	/* Code update for BSS size == 0
+	 * Zero out the bss region.
+	 */
+
+	p1.l = ___bss_start;
+	p1.h = ___bss_start;
+	p2.l = ___bss_stop;
+	p2.h = ___bss_stop;
+	r0 = 0;
+	p2 -= p1;
+	lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
+.L_clear_bss:
+	B[p1++] = r0;
+
+	/* In case there is a NULL pointer reference
+	 * Zero out region before stext
+	 */
+
+	p1.l = 0x0;
+	p1.h = 0x0;
+	r0.l = __stext;
+	r0.h = __stext;
+	r0 = r0 >> 1;
+	p2 = r0;
+	r0 = 0;
+	lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
+.L_clear_zero:
+	W[p1++] = r0;
+
+	/* pass the uboot arguments to the global value command line */
+	R0 = R7;
+	call _cmdline_init;
+
+	p1.l = __rambase;
+	p1.h = __rambase;
+	r0.l = __sdata;
+	r0.h = __sdata;
+	[p1] = r0;
+
+	p1.l = __ramstart;
+	p1.h = __ramstart;
+	p3.l = ___bss_stop;
+	p3.h = ___bss_stop;
+
+	r1 = p3;
+	[p1] = r1;
+
+
+	/*
+	 *  load the current thread pointer and stack
+	 */
+	r1.l = _init_thread_union;
+	r1.h = _init_thread_union;
+
+	r2.l = 0x2000;
+	r2.h = 0x0000;
+	r1 = r1 + r2;
+	sp = r1;
+	usp = sp;
+	fp = sp;
+	call _start_kernel;
+.L_exit:
+	jump.s	.L_exit;
+
+.section .l1.text
+#if CONFIG_BFIN_KERNEL_CLOCK
+ENTRY(_start_dma_code)
+
+	/* Enable PHY CLK buffer output */
+	p0.h = hi(VR_CTL);
+	p0.l = lo(VR_CTL);
+	r0.l = w[p0];
+	bitset(r0, 14);
+	w[p0] = r0.l;
+	ssync;
+
+	p0.h = hi(SIC_IWR);
+	p0.l = lo(SIC_IWR);
+	r0.l = 0x1;
+	r0.h = 0x0;
+	[p0] = r0;
+	SSYNC;
+
+	/*
+	 *  Set PLL_CTL
+	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+	 *   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
+	 *   - [7]     = output delay (add 200ps of delay to mem signals)
+	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
+	 *   - [5]     = PDWN      : 1=All Clocks off
+	 *   - [3]     = STOPCK    : 1=Core Clock off
+	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
+	 *   - [0]     = DF        : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+	 *   all other bits set to zero
+	 */
+
+	p0.h = hi(PLL_LOCKCNT);
+	p0.l = lo(PLL_LOCKCNT);
+	r0 = 0x300(Z);
+	w[p0] = r0.l;
+	ssync;
+
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITSET (R0, 24);
+	[P2] = R0;
+	SSYNC;
+
+	r0 = CONFIG_VCO_MULT & 63;       /* Load the VCO multiplier         */
+	r0 = r0 << 9;                    /* Shift it over,                  */
+	r1 = CLKIN_HALF;                 /* Do we need to divide CLKIN by 2?*/
+	r0 = r1 | r0;
+	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
+	r1 = r1 << 8;                    /* Shift it over                   */
+	r0 = r1 | r0;                    /* add them all together           */
+
+	p0.h = hi(PLL_CTL);
+	p0.l = lo(PLL_CTL);              /* Load the address                */
+	cli r2;                          /* Disable interrupts              */
+	ssync;
+	w[p0] = r0.l;                    /* Set the value                   */
+	idle;                            /* Wait for the PLL to stablize    */
+	sti r2;                          /* Enable interrupts               */
+
+.Lcheck_again:
+	p0.h = hi(PLL_STAT);
+	p0.l = lo(PLL_STAT);
+	R0 = W[P0](Z);
+	CC = BITTST(R0,5);
+	if ! CC jump .Lcheck_again;
+
+	/* Configure SCLK & CCLK Dividers */
+	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+	p0.h = hi(PLL_DIV);
+	p0.l = lo(PLL_DIV);
+	w[p0] = r0.l;
+	ssync;
+
+	p0.l = lo(EBIU_SDRRC);
+	p0.h = hi(EBIU_SDRRC);
+	r0 = mem_SDRRC;
+	w[p0] = r0.l;
+	ssync;
+
+	p0.l = (EBIU_SDBCTL & 0xFFFF);
+	p0.h = (EBIU_SDBCTL >> 16);     /* SDRAM Memory Bank Control Register */
+	r0 = mem_SDBCTL;
+	w[p0] = r0.l;
+	ssync;
+
+	P2.H = hi(EBIU_SDGCTL);
+	P2.L = lo(EBIU_SDGCTL);
+	R0 = [P2];
+	BITCLR (R0, 24);
+	p0.h = hi(EBIU_SDSTAT);
+	p0.l = lo(EBIU_SDSTAT);
+	r2.l = w[p0];
+	cc = bittst(r2,3);
+	if !cc jump .Lskip;
+	NOP;
+	BITSET (R0, 23);
+.Lskip:
+	[P2] = R0;
+	SSYNC;
+
+	R0.L = lo(mem_SDGCTL);
+	R0.H = hi(mem_SDGCTL);
+	R1 = [p2];
+	R1 = R1 | R0;
+	[P2] = R1;
+	SSYNC;
+
+	p0.h = hi(SIC_IWR);
+	p0.l = lo(SIC_IWR);
+	r0.l = lo(IWR_ENABLE_ALL);
+	r0.h = hi(IWR_ENABLE_ALL);
+	[p0] = r0;
+	SSYNC;
+
+	RTS;
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+ENTRY(_bfin_reset)
+	/* No more interrupts to be handled*/
+	CLI R6;
+	SSYNC;
+
+#if defined(CONFIG_MTD_M25P80)
+/*
+ * The following code fix the SPI flash reboot issue,
+ * /CS signal of the chip which is using PF10 return to GPIO mode
+ */
+	p0.h = hi(PORTF_FER);
+	p0.l = lo(PORTF_FER);
+	r0.l = 0x0000;
+	w[p0] = r0.l;
+	SSYNC;
+
+/* /CS return to high */
+	p0.h = hi(PORTFIO);
+	p0.l = lo(PORTFIO);
+	r0.l = 0xFFFF;
+	w[p0] = r0.l;
+	SSYNC;
+
+/* Delay some time, This is necessary */
+	r1.h = 0;
+	r1.l = 0x400;
+	p1   = r1;
+	lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1;
+_delay_lab1:
+	r0.h = 0;
+	r0.l = 0x8000;
+	p0   = r0;
+	lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0;
+_delay_lab0:
+	nop;
+_delay_lab0_end:
+	nop;
+_delay_lab1_end:
+	nop;
+#endif
+
+	/* Clear the bits 13-15 in SWRST if they werent cleared */
+	p0.h = hi(SWRST);
+	p0.l = lo(SWRST);
+	csync;
+	r0.l = w[p0];
+
+	/* Clear the IMASK register */
+	p0.h = hi(IMASK);
+	p0.l = lo(IMASK);
+	r0 = 0x0;
+	[p0] = r0;
+
+	/* Clear the ILAT register */
+	p0.h = hi(ILAT);
+	p0.l = lo(ILAT);
+	r0 = [p0];
+	[p0] = r0;
+	SSYNC;
+
+	/* Disable the WDOG TIMER */
+	p0.h = hi(WDOG_CTL);
+	p0.l = lo(WDOG_CTL);
+	r0.l = 0xAD6;
+	w[p0] = r0.l;
+	SSYNC;
+
+	/* Clear the sticky bit incase it is already set */
+	p0.h = hi(WDOG_CTL);
+	p0.l = lo(WDOG_CTL);
+	r0.l = 0x8AD6;
+	w[p0] = r0.l;
+	SSYNC;
+
+	/* Program the count value */
+	R0.l = 0x100;
+	R0.h = 0x0;
+	P0.h = hi(WDOG_CNT);
+	P0.l = lo(WDOG_CNT);
+	[P0] = R0;
+	SSYNC;
+
+	/* Program WDOG_STAT if necessary */
+	P0.h = hi(WDOG_CTL);
+	P0.l = lo(WDOG_CTL);
+	R0 = W[P0](Z);
+	CC = BITTST(R0,1);
+	if !CC JUMP .LWRITESTAT;
+	CC = BITTST(R0,2);
+	if !CC JUMP .LWRITESTAT;
+	JUMP .LSKIP_WRITE;
+
+.LWRITESTAT:
+	/* When watch dog timer is enabled,
+	 * a write to STAT will load the contents of CNT to STAT
+	 */
+	R0 = 0x0000(z);
+	P0.h = hi(WDOG_STAT);
+	P0.l = lo(WDOG_STAT)
+	[P0] = R0;
+	SSYNC;
+
+.LSKIP_WRITE:
+	/* Enable the reset event */
+	P0.h = hi(WDOG_CTL);
+	P0.l = lo(WDOG_CTL);
+	R0 = W[P0](Z);
+	BITCLR(R0,1);
+	BITCLR(R0,2);
+	W[P0] = R0.L;
+	SSYNC;
+	NOP;
+
+	/* Enable the wdog counter */
+	R0 = W[P0](Z);
+	BITCLR(R0,4);
+	W[P0] = R0.L;
+	SSYNC;
+
+	IDLE;
+
+	RTS;
+
+.data
+
+/*
+ * Set up the usable of RAM stuff. Size of RAM is determined then
+ * an initial stack set up at the end.
+ */
+
+.align 4
+__rambase:
+.long   0
+__ramstart:
+.long   0
+__ramend:
+.long   0
diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c
new file mode 100644
index 0000000..dde450f
--- /dev/null
+++ b/arch/blackfin/mach-bf548/ints-priority.c
@@ -0,0 +1,137 @@
+/*
+ * File:         arch/blackfin/mach-bf537/ints-priority.c
+ * Based on:     arch/blackfin/mach-bf533/ints-priority.c
+ * Author:       Michael Hennerich
+ *
+ * Created:
+ * Description:  Set up the interupt priorities
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+
+void program_IAR(void)
+{
+	/* Program the IAR0 Register with the configured priority */
+	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+			    ((CONFIG_IRQ_DMAC0_ERR - 7) << IRQ_DMAC0_ERR_POS) |
+			    ((CONFIG_IRQ_EPPI0_ERR - 7) << IRQ_EPPI0_ERR_POS) |
+			    ((CONFIG_IRQ_SPORT0_ERR - 7) << IRQ_SPORT0_ERR_POS) |
+			    ((CONFIG_IRQ_SPORT1_ERR - 7) << IRQ_SPORT1_ERR_POS) |
+			    ((CONFIG_IRQ_SPI0_ERR - 7) << IRQ_SPI0_ERR_POS) |
+			    ((CONFIG_IRQ_UART0_ERR - 7) << IRQ_UART0_ERR_POS) |
+			    ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS));
+
+	bfin_write_SIC_IAR1(((CONFIG_IRQ_EPPI0 - 7) << IRQ_EPPI0_POS) |
+			    ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
+			    ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
+			    ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS) |
+			    ((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
+			    ((CONFIG_IRQ_SPI0 - 7) << IRQ_SPI0_POS) |
+			    ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
+			    ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS));
+
+	bfin_write_SIC_IAR2(((CONFIG_IRQ_TIMER8 - 7) << IRQ_TIMER8_POS) |
+			    ((CONFIG_IRQ_TIMER9 - 7) << IRQ_TIMER9_POS) |
+			    ((CONFIG_IRQ_PINT0 - 7) << IRQ_PINT0_POS) |
+			    ((CONFIG_IRQ_PINT1 - 7) << IRQ_PINT1_POS) |
+			    ((CONFIG_IRQ_MDMAS0 - 7) << IRQ_MDMAS0_POS) |
+			    ((CONFIG_IRQ_MDMAS1 - 7) << IRQ_MDMAS1_POS) |
+			    ((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCHDOG_POS));
+
+	bfin_write_SIC_IAR3(((CONFIG_IRQ_DMAC1_ERR - 7) << IRQ_DMAC1_ERR_POS) |
+			    ((CONFIG_IRQ_SPORT2_ERR - 7) << IRQ_SPORT2_ERR_POS) |
+			    ((CONFIG_IRQ_SPORT3_ERR - 7) << IRQ_SPORT3_ERR_POS) |
+			    ((CONFIG_IRQ_MXVR_DATA - 7) << IRQ_MXVR_DATA_POS) |
+			    ((CONFIG_IRQ_SPI1_ERR - 7) << IRQ_SPI1_ERR_POS) |
+			    ((CONFIG_IRQ_SPI2_ERR - 7) << IRQ_SPI2_ERR_POS) |
+			    ((CONFIG_IRQ_UART1_ERR - 7) << IRQ_UART1_ERR_POS) |
+			    ((CONFIG_IRQ_UART2_ERR - 7) << IRQ_UART2_ERR_POS));
+
+	bfin_write_SIC_IAR4(((CONFIG_IRQ_CAN0_ERR - 7) << IRQ_CAN0_ERR_POS) |
+			    ((CONFIG_IRQ_SPORT2_RX - 7) << IRQ_SPORT2_RX_POS) |
+			    ((CONFIG_IRQ_SPORT2_TX - 7) << IRQ_SPORT2_TX_POS) |
+			    ((CONFIG_IRQ_SPORT3_RX - 7) << IRQ_SPORT3_RX_POS) |
+			    ((CONFIG_IRQ_SPORT3_TX - 7) << IRQ_SPORT3_TX_POS) |
+			    ((CONFIG_IRQ_EPPI1 - 7) << IRQ_EPPI1_POS) |
+			    ((CONFIG_IRQ_EPPI2 - 7) << IRQ_EPPI2_POS) |
+			    ((CONFIG_IRQ_SPI1 - 7) << IRQ_SPI1_POS));
+
+	bfin_write_SIC_IAR5(((CONFIG_IRQ_SPI2 - 7) << IRQ_SPI2_POS) |
+			    ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
+			    ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
+			    ((CONFIG_IRQ_ATAPI_RX - 7) << IRQ_ATAPI_RX_POS) |
+			    ((CONFIG_IRQ_ATAPI_TX - 7) << IRQ_ATAPI_TX_POS) |
+			    ((CONFIG_IRQ_TWI0 - 7) << IRQ_TWI0_POS) |
+			    ((CONFIG_IRQ_TWI1 - 7) << IRQ_TWI1_POS) |
+			    ((CONFIG_IRQ_CAN0_RX - 7) << IRQ_CAN0_RX_POS));
+
+	bfin_write_SIC_IAR6(((CONFIG_IRQ_CAN0_TX - 7) << IRQ_CAN0_TX_POS) |
+			    ((CONFIG_IRQ_MDMAS2 - 7) << IRQ_MDMAS2_POS) |
+			    ((CONFIG_IRQ_MDMAS3 - 7) << IRQ_MDMAS3_POS) |
+			    ((CONFIG_IRQ_MXVR_ERR - 7) << IRQ_MXVR_ERR_POS) |
+			    ((CONFIG_IRQ_MXVR_MSG - 7) << IRQ_MXVR_MSG_POS) |
+			    ((CONFIG_IRQ_MXVR_PKT - 7) << IRQ_MXVR_PKT_POS) |
+			    ((CONFIG_IRQ_EPPI1_ERR - 7) << IRQ_EPPI1_ERR_POS) |
+			    ((CONFIG_IRQ_EPPI2_ERR - 7) << IRQ_EPPI2_ERR_POS));
+
+	bfin_write_SIC_IAR7(((CONFIG_IRQ_UART3_ERR - 7) << IRQ_UART3_ERR_POS) |
+			    ((CONFIG_IRQ_HOST_ERR - 7) << IRQ_HOST_ERR_POS) |
+			    ((CONFIG_IRQ_PIXC_ERR - 7) << IRQ_PIXC_ERR_POS) |
+			    ((CONFIG_IRQ_NFC_ERR - 7) << IRQ_NFC_ERR_POS) |
+			    ((CONFIG_IRQ_ATAPI_ERR - 7) << IRQ_ATAPI_ERR_POS) |
+			    ((CONFIG_IRQ_CAN1_ERR - 7) << IRQ_CAN1_ERR_POS) |
+			    ((CONFIG_IRQ_HS_DMA_ERR - 7) << IRQ_HS_DMA_ERR_POS));
+
+	bfin_write_SIC_IAR8(((CONFIG_IRQ_PIXC_IN0 - 7) << IRQ_PIXC_IN1_POS) |
+			    ((CONFIG_IRQ_PIXC_IN1 - 7) << IRQ_PIXC_IN1_POS) |
+			    ((CONFIG_IRQ_PIXC_OUT - 7) << IRQ_PIXC_OUT_POS) |
+			    ((CONFIG_IRQ_SDH - 7) << IRQ_SDH_POS) |
+			    ((CONFIG_IRQ_CNT - 7) << IRQ_CNT_POS) |
+			    ((CONFIG_IRQ_KEY - 7) << IRQ_KEY_POS) |
+			    ((CONFIG_IRQ_CAN1_RX - 7) << IRQ_CAN1_RX_POS) |
+			    ((CONFIG_IRQ_CAN1_TX - 7) << IRQ_CAN1_TX_POS));
+
+	bfin_write_SIC_IAR9(((CONFIG_IRQ_SDH_MASK0 - 7) << IRQ_SDH_MASK0_POS) |
+			    ((CONFIG_IRQ_SDH_MASK1 - 7) << IRQ_SDH_MASK1_POS) |
+			    ((CONFIG_IRQ_USB_INT0 - 7) << IRQ_USB_INT0_POS) |
+			    ((CONFIG_IRQ_USB_INT1 - 7) << IRQ_USB_INT1_POS) |
+			    ((CONFIG_IRQ_USB_INT2 - 7) << IRQ_USB_INT2_POS) |
+			    ((CONFIG_IRQ_USB_DMA - 7) << IRQ_USB_DMA_POS) |
+			    ((CONFIG_IRQ_OTPSEC - 7) << IRQ_OTPSEC_POS));
+
+	bfin_write_SIC_IAR10(((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
+			     ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS));
+
+	bfin_write_SIC_IAR11(((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
+			     ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
+			     ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS) |
+			     ((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
+			     ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
+			     ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
+			     ((CONFIG_IRQ_PINT2 - 7) << IRQ_PINT2_POS) |
+			     ((CONFIG_IRQ_PINT3 - 7) << IRQ_PINT3_POS));
+
+	SSYNC();
+}
diff --git a/arch/blackfin/mach-bf561/Makefile b/arch/blackfin/mach-bf561/Makefile
index 57f475a..f39235a 100644
--- a/arch/blackfin/mach-bf561/Makefile
+++ b/arch/blackfin/mach-bf561/Makefile
@@ -4,6 +4,6 @@
 
 extra-y := head.o
 
-obj-y := ints-priority.o
+obj-y := ints-priority.o dma.o
 
 obj-$(CONFIG_BF561_COREB) += coreb.o
diff --git a/arch/blackfin/mach-bf561/dma.c b/arch/blackfin/mach-bf561/dma.c
new file mode 100644
index 0000000..89c65bb
--- /dev/null
+++ b/arch/blackfin/mach-bf561/dma.c
@@ -0,0 +1,131 @@
+/*
+ * File:         arch/blackfin/mach-bf561/dma.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+	(struct dma_register *) DMA1_0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_7_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_8_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_9_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_10_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_11_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_7_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_8_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_9_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_10_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_11_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA1_D0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA1_S0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA1_D1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA1_S1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA2_D0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA2_S0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA2_D1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA2_S1_NEXT_DESC_PTR,
+	(struct dma_register *) IMDMA_D0_NEXT_DESC_PTR,
+	(struct dma_register *) IMDMA_S0_NEXT_DESC_PTR,
+	(struct dma_register *) IMDMA_D1_NEXT_DESC_PTR,
+	(struct dma_register *) IMDMA_S1_NEXT_DESC_PTR,
+};
+
+int channel2irq(unsigned int channel)
+{
+	int ret_irq = -1;
+
+	switch (channel) {
+	case CH_PPI0:
+		ret_irq = IRQ_PPI0;
+		break;
+	case CH_PPI1:
+		ret_irq = IRQ_PPI1;
+		break;
+	case CH_SPORT0_RX:
+		ret_irq = IRQ_SPORT0_RX;
+		break;
+	case CH_SPORT0_TX:
+		ret_irq = IRQ_SPORT0_TX;
+		break;
+	case CH_SPORT1_RX:
+		ret_irq = IRQ_SPORT1_RX;
+		break;
+	case CH_SPORT1_TX:
+		ret_irq = IRQ_SPORT1_TX;
+		break;
+	case CH_SPI:
+		ret_irq = IRQ_SPI;
+		break;
+	case CH_UART_RX:
+		ret_irq = IRQ_UART_RX;
+		break;
+	case CH_UART_TX:
+		ret_irq = IRQ_UART_TX;
+		break;
+
+	case CH_MEM_STREAM0_SRC:
+	case CH_MEM_STREAM0_DEST:
+		ret_irq = IRQ_MEM_DMA0;
+		break;
+	case CH_MEM_STREAM1_SRC:
+	case CH_MEM_STREAM1_DEST:
+		ret_irq = IRQ_MEM_DMA1;
+		break;
+	case CH_MEM_STREAM2_SRC:
+	case CH_MEM_STREAM2_DEST:
+		ret_irq = IRQ_MEM_DMA2;
+		break;
+	case CH_MEM_STREAM3_SRC:
+	case CH_MEM_STREAM3_DEST:
+		ret_irq = IRQ_MEM_DMA3;
+		break;
+
+	case CH_IMEM_STREAM0_SRC:
+	case CH_IMEM_STREAM0_DEST:
+		ret_irq = IRQ_IMEM_DMA0;
+		break;
+	case CH_IMEM_STREAM1_SRC:
+	case CH_IMEM_STREAM1_DEST:
+		ret_irq = IRQ_IMEM_DMA1;
+		break;
+	}
+	return ret_irq;
+}
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index d3a4907..0279ede 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -4,9 +4,9 @@
 
 obj-y := \
 	cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \
-	interrupt.o lock.o dpmc.o irqpanic.o
+	interrupt.o lock.o irqpanic.o
 
 obj-$(CONFIG_CPLB_INFO)          += cplbinfo.o
 obj-$(CONFIG_BFIN_SINGLE_CORE)   += ints-priority-sc.o
 obj-$(CONFIG_BFIN_DUAL_CORE)     += ints-priority-dc.o
-obj-$(CONFIG_PM)                 += pm.o
+obj-$(CONFIG_PM)                 += pm.o dpmc.o
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c
index 2cfc7d5..cec0f84 100644
--- a/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/arch/blackfin/mach-common/ints-priority-sc.c
@@ -13,7 +13,7 @@
  *               2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
  *               2003 Metrowerks/Motorola
  *               2003 Bas Vermeulen <bas@buyways.nl>
- *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2004-2007 Analog Devices Inc.
  *
  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  *
@@ -65,9 +65,9 @@
 
 struct ivgx {
 	/* irq number for request_irq, available in mach-bf533/irq.h */
-	int irqno;
+	unsigned int irqno;
 	/* corresponding bit in the SIC_ISR register */
-	int isrflag;
+	unsigned int isrflag;
 } ivg_table[NR_PERI_INTS];
 
 struct ivg_slice {
@@ -98,7 +98,7 @@
 			     bfin_read32((unsigned long *) SIC_IAR0 +
 					 (irqn >> 3)) >> iar_shift)) {
 				ivg_table[irq_pos].irqno = IVG7 + irqn;
-				ivg_table[irq_pos].isrflag = 1 << irqn;
+				ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
 				ivg7_13[ivg].istop++;
 				irq_pos++;
 			}
@@ -141,15 +141,31 @@
 
 static void bfin_internal_mask_irq(unsigned int irq)
 {
+#ifndef CONFIG_BF54x
 	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
 			     ~(1 << (irq - (IRQ_CORETMR + 1))));
+#else
+	unsigned mask_bank, mask_bit;
+	mask_bank = (irq - (IRQ_CORETMR +1))/32;
+	mask_bit = (irq - (IRQ_CORETMR + 1))%32;
+	bfin_write_SIC_IMASK( mask_bank, bfin_read_SIC_IMASK(mask_bank) & \
+			    ~(1 << mask_bit));
+#endif
 	SSYNC();
 }
 
 static void bfin_internal_unmask_irq(unsigned int irq)
 {
+#ifndef CONFIG_BF54x
 	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
 			     (1 << (irq - (IRQ_CORETMR + 1))));
+#else
+	unsigned mask_bank, mask_bit;
+	mask_bank = (irq - (IRQ_CORETMR +1))/32;
+	mask_bit = (irq - (IRQ_CORETMR + 1))%32;
+	bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | \
+			( 1 << mask_bit));
+#endif
 	SSYNC();
 }
 
@@ -452,7 +468,14 @@
 	int irq;
 	unsigned long ilat = 0;
 	/*  Disable all the peripheral intrs  - page 4-29 HW Ref manual */
+#ifdef CONFIG_BF54x
+	bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
+	bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
+	bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
+#else
 	bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
+#endif
+
 	SSYNC();
 
 	local_irq_disable();
@@ -555,9 +578,25 @@
 	} else {
 		struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
 		struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
-		unsigned long sic_status;
+#ifdef CONFIG_BF54x
+		unsigned long sic_status[3];
 
 		SSYNC();
+		sic_status[0] = bfin_read_SIC_ISR(0) & bfin_read_SIC_IMASK(0);
+		sic_status[1] = bfin_read_SIC_ISR(1) & bfin_read_SIC_IMASK(1);
+		sic_status[2] = bfin_read_SIC_ISR(2) & bfin_read_SIC_IMASK(2);
+		SSYNC();
+		for(;; ivg++) {
+			if (ivg >= ivg_stop) {
+				atomic_inc(&num_spurious);
+				return;
+			}
+			if (sic_status[(ivg->irqno - IVG7)/32] & ivg->isrflag)
+				break;
+		}
+#else
+		unsigned long sic_status;
+		SSYNC();
 		sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
 
 		for (;; ivg++) {
@@ -567,6 +606,7 @@
 			} else if (sic_status & ivg->isrflag)
 				break;
 		}
+#endif
 		vec = ivg->irqno;
 	}
 	asm_do_IRQ(vec, fp);
diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
index d98d77a..bc0cca0 100644
--- a/include/asm-blackfin/gpio.h
+++ b/include/asm-blackfin/gpio.h
@@ -204,6 +204,10 @@
 
 #endif
 
+#ifdef BF548_FAMILY
+#include <asm-blackfin/mach-bf548/gpio.h>
+#endif
+
 #ifdef BF561_FAMILY
 #define MAX_BLACKFIN_GPIOS 48
 #define PORT_FIO0 GPIO_0
@@ -264,6 +268,7 @@
 unsigned short get_gpiop_maskb(unsigned short);
 unsigned short get_gpiop_data(unsigned short);
 
+#ifndef BF548_FAMILY
 struct gpio_port_t {
 	unsigned short data;
 	unsigned short dummy1;
@@ -299,6 +304,7 @@
 	unsigned short dummy16;
 	unsigned short inen;
 };
+#endif
 
 #ifdef CONFIG_PM
 #define PM_WAKE_RISING	0x1
diff --git a/include/asm-blackfin/mach-bf533/dma.h b/include/asm-blackfin/mach-bf533/dma.h
index bd9d5e9..16c672c 100644
--- a/include/asm-blackfin/mach-bf533/dma.h
+++ b/include/asm-blackfin/mach-bf533/dma.h
@@ -51,4 +51,7 @@
 #define CH_MEM_STREAM1_DEST     10	 /* TX */
 #define CH_MEM_STREAM1_SRC      11	 /* RX */
 
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
+
 #endif
diff --git a/include/asm-blackfin/mach-bf537/dma.h b/include/asm-blackfin/mach-bf537/dma.h
index 7a96404..0219919 100644
--- a/include/asm-blackfin/mach-bf537/dma.h
+++ b/include/asm-blackfin/mach-bf537/dma.h
@@ -52,4 +52,7 @@
 #define CH_MEM_STREAM1_DEST	14	 /* TX */
 #define CH_MEM_STREAM1_SRC 	15	 /* RX */
 
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
+
 #endif
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index ddc150e..aca1d4b 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -47,6 +47,8 @@
 			    SPORT external receive and transmit clocks. */
 #define ANOMALY_05000272 /* Certain data cache write through modes fail for
 			    VDDint <=0.9V */
+#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
+			    not restored */
 #define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the
 			    Boundary of Reserved Memory */
 #define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and
diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/include/asm-blackfin/mach-bf548/bf548.h
index 0b21102..163c79e 100644
--- a/include/asm-blackfin/mach-bf548/bf548.h
+++ b/include/asm-blackfin/mach-bf548/bf548.h
@@ -30,6 +30,8 @@
 #ifndef __MACH_BF548_H__
 #define __MACH_BF548_H__
 
+#define SUPPORTED_REVID 0
+
 /* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */
 
 #define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE)	/* SPI_STAT */
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 8f5d9c4..2f4afc9 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -1,34 +1,35 @@
 #include <linux/serial.h>
 #include <asm/dma.h>
 
-#define NR_PORTS		2
+#define NR_PORTS		4
 
-#define OFFSET_THR              0x00	/* Transmit Holding register            */
-#define OFFSET_RBR              0x00	/* Receive Buffer register              */
 #define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
-#define OFFSET_IER              0x04	/* Interrupt Enable Register            */
 #define OFFSET_DLH              0x04	/* Divisor Latch (High-Byte)            */
-#define OFFSET_IIR              0x08	/* Interrupt Identification Register    */
+#define OFFSET_GCTL             0x08	/* Global Control Register              */
 #define OFFSET_LCR              0x0C	/* Line Control Register                */
 #define OFFSET_MCR              0x10	/* Modem Control Register               */
 #define OFFSET_LSR              0x14	/* Line Status Register                 */
 #define OFFSET_MSR              0x18	/* Modem Status Register                */
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
-#define OFFSET_GCTL             0x24	/* Global Control Register              */
+#define OFFSET_IER_SET          0x20	/* Set Interrupt Enable Register        */
+#define OFFSET_IER_CLEAR        0x24	/* Clear Interrupt Enable Register      */
+#define OFFSET_THR              0x28	/* Transmit Holding register            */
+#define OFFSET_RBR              0x2C	/* Receive Buffer register              */
 
 #define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
 #define UART_GET_DLL(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLL))
-#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
 #define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
-#define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
+#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER_SET))
 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
 #define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
 
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
-#define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER_SET),v)
+#define UART_CLEAR_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v)
 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
+#define UART_PUT_LSR(uart,v)	bfin_write16(((uart)->port.membase + OFFSET_LSR),v)
 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
 
@@ -112,9 +113,29 @@
 	CH_UART1_TX,
 	CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
-	CONFIG_UART1_CTS_PIN,
-	CONFIG_UART1_RTS_PIN,
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	{
+	0xFFC02100,
+	IRQ_UART2_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART2_TX,
+	CH_UART2_RX,
+#endif
+#ifdef CONFIG_BFIN_UART2_CTSRTS
+	CONFIG_UART2_CTS_PIN,
+	CONFIG_UART2_RTS_PIN,
+#endif
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	{
+	0xFFC03100,
+	IRQ_UART3_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART3_TX,
+	CH_UART3_RX,
 #endif
 	},
 #endif
@@ -124,15 +145,40 @@
 
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 {
-	unsigned short val;
-	val = bfin_read16(BFIN_PORT_MUX);
-	val &= ~(PFDE | PFTE);
-	bfin_write16(BFIN_PORT_MUX, val);
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	/* Enable UART0 RX and TX on pin 7 & 8 of PORT E */
+	bfin_write_PORTE_FER(0x180 | bfin_read_PORTE_FER());
+	bfin_write_PORTE_MUX(0x3C000 | bfin_read_PORTE_MUX());
+#endif
 
-	val = bfin_read16(PORTF_FER);
-	val |= 0xF;
-	bfin_write16(PORTF_FER, val);
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	/* Enable UART1 RX and TX on pin 0 & 1 of PORT H */
+	bfin_write_PORTH_FER(0x3 | bfin_read_PORTH_FER());
+	bfin_write_PORTH_MUX(~0xF & bfin_read_PORTH_MUX());
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	/* Enable UART1 RTS and CTS on pin 9 & 10 of PORT E */
+	bfin_write_PORTE_FER(0x600 | bfin_read_PORTE_FER());
+	bfin_write_PORTE_MUX(~0x3C0000 & bfin_read_PORTE_MUX());
+#endif
+#endif
 
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	/* Enable UART2 RX and TX on pin 4 & 5 of PORT B */
+	bfin_write_PORTB_FER(0x30 | bfin_read_PORTB_FER());
+	bfin_write_PORTB_MUX(~0xF00 & bfin_read_PORTB_MUX());
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	/* Enable UART3 RX and TX on pin 6 & 7 of PORT B */
+	bfin_write_PORTB_FER(0xC0 | bfin_read_PORTB_FER());
+	bfin_write_PORTB_MUX(~0xF000 | bfin_read_PORTB_MUX());
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	/* Enable UART3 RTS and CTS on pin 2 & 3 of PORT B */
+	bfin_write_PORTB_FER(0xC | bfin_read_PORTB_FER());
+	bfin_write_PORTB_MUX(~0xF0 | bfin_read_PORTB_MUX());
+#endif
+#endif
+	SSYNC();
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	if (uart->cts_pin >= 0) {
 		gpio_request(uart->cts_pin, NULL);
diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h
index 094c41a..791218f 100644
--- a/include/asm-blackfin/mach-bf548/blackfin.h
+++ b/include/asm-blackfin/mach-bf548/blackfin.h
@@ -34,24 +34,26 @@
 
 #define BF548_FAMILY
 
+#include "bf548.h"
+#include "mem_map.h"
+#include "anomaly.h"
+
 #ifdef CONFIG_BF542
-#include "bf542.h"
+#include "defBF542.h"
+#endif
 
 #ifdef CONFIG_BF544
-#include "bf544.h"
+#include "defBF544.h"
 #endif
 
 #ifdef CONFIG_BF548
-#include "bf548.h"
+#include "defBF548.h"
 #endif
 
 #ifdef CONFIG_BF549
-#include "bf549.h"
+#include "defBF549.h"
 #endif
 
-#include "mem_map.h"
-#include "anomaly.h"
-
 #if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
 #ifdef CONFIG_BF542
 #include "cdefBF542.h"
diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
index 6bbcefe..b133800 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
@@ -31,7 +31,7 @@
 #ifndef _CDEF_BF54X_H
 #define _CDEF_BF54X_H
 
-#include <defBF54x_base.h>
+#include "defBF54x_base.h"
 
 /* ************************************************************** */
 /* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x    */
@@ -70,12 +70,18 @@
 #define bfin_write_SIC_IMASK1(val)	bfin_write32(SIC_IMASK1, val)
 #define bfin_read_SIC_IMASK2()		bfin_read32(SIC_IMASK2)
 #define bfin_write_SIC_IMASK2(val)	bfin_write32(SIC_IMASK2, val)
+#define bfin_read_SIC_IMASK(x)		bfin_read32(SIC_IMASK0 + (x << 2))
+#define bfin_write_SIC_IMASK(x, val)	bfin_write32((SIC_IMASK0 + (x << 2)), val)
+
 #define bfin_read_SIC_ISR0()		bfin_read32(SIC_ISR0)
 #define bfin_write_SIC_ISR0(val)	bfin_write32(SIC_ISR0, val)
 #define bfin_read_SIC_ISR1()		bfin_read32(SIC_ISR1)
 #define bfin_write_SIC_ISR1(val)	bfin_write32(SIC_ISR1, val)
 #define bfin_read_SIC_ISR2()		bfin_read32(SIC_ISR2)
 #define bfin_write_SIC_ISR2(val)	bfin_write32(SIC_ISR2, val)
+#define bfin_read_SIC_ISR(x)		bfin_read32(SIC_ISR0 + (x << 2))
+#define bfin_write_SIC_ISR(x, val)	bfin_write32((SIC_ISR0 + (x << 2)), val)
+
 #define bfin_read_SIC_IWR0()		bfin_read32(SIC_IWR0)
 #define bfin_write_SIC_IWR0(val)	bfin_write32(SIC_IWR0, val)
 #define bfin_read_SIC_IWR1()		bfin_read32(SIC_IWR1)
@@ -710,21 +716,21 @@
 #define bfin_read_MDMA_D0_NEXT_DESC_PTR() 	bfin_read32(MDMA_D0_NEXT_DESC_PTR)
 #define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_D0_NEXT_DESC_PTR)
 #define bfin_read_MDMA_D0_START_ADDR() 		bfin_read32(MDMA_D0_START_ADDR)
-#define bfin_write_MDMA_D0_START_ADDR(val) 	bfin_write32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val) 	bfin_write32(MDMA_D0_START_ADDR, val)
 #define bfin_read_MDMA_D0_CONFIG()		bfin_read16(MDMA_D0_CONFIG)
 #define bfin_write_MDMA_D0_CONFIG(val)		bfin_write16(MDMA_D0_CONFIG, val)
 #define bfin_read_MDMA_D0_X_COUNT()		bfin_read16(MDMA_D0_X_COUNT)
 #define bfin_write_MDMA_D0_X_COUNT(val)		bfin_write16(MDMA_D0_X_COUNT, val)
 #define bfin_read_MDMA_D0_X_MODIFY()		bfin_read16(MDMA_D0_X_MODIFY)
-#define bfin_write_MDMA_D0_X_MODIFY(val) 	bfin_write16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val) 	bfin_write16(MDMA_D0_X_MODIFY, val)
 #define bfin_read_MDMA_D0_Y_COUNT()		bfin_read16(MDMA_D0_Y_COUNT)
 #define bfin_write_MDMA_D0_Y_COUNT(val)		bfin_write16(MDMA_D0_Y_COUNT, val)
 #define bfin_read_MDMA_D0_Y_MODIFY()		bfin_read16(MDMA_D0_Y_MODIFY)
-#define bfin_write_MDMA_D0_Y_MODIFY(val) 	bfin_write16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val) 	bfin_write16(MDMA_D0_Y_MODIFY, val)
 #define bfin_read_MDMA_D0_CURR_DESC_PTR() 	bfin_read32(MDMA_D0_CURR_DESC_PTR)
-#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) 	bfin_write32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) 	bfin_write32(MDMA_D0_CURR_DESC_PTR, val)
 #define bfin_read_MDMA_D0_CURR_ADDR() 		bfin_read32(MDMA_D0_CURR_ADDR)
-#define bfin_write_MDMA_D0_CURR_ADDR(val) 	bfin_write32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val) 	bfin_write32(MDMA_D0_CURR_ADDR, val)
 #define bfin_read_MDMA_D0_IRQ_STATUS()		bfin_read16(MDMA_D0_IRQ_STATUS)
 #define bfin_write_MDMA_D0_IRQ_STATUS(val)	bfin_write16(MDMA_D0_IRQ_STATUS, val)
 #define bfin_read_MDMA_D0_PERIPHERAL_MAP()	bfin_read16(MDMA_D0_PERIPHERAL_MAP)
@@ -734,23 +740,23 @@
 #define bfin_read_MDMA_D0_CURR_Y_COUNT()	bfin_read16(MDMA_D0_CURR_Y_COUNT)
 #define bfin_write_MDMA_D0_CURR_Y_COUNT(val)	bfin_write16(MDMA_D0_CURR_Y_COUNT, val)
 #define bfin_read_MDMA_S0_NEXT_DESC_PTR() 	bfin_read32(MDMA_S0_NEXT_DESC_PTR)
-#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_S0_NEXT_DESC_PTR, val)
 #define bfin_read_MDMA_S0_START_ADDR() 		bfin_read32(MDMA_S0_START_ADDR)
-#define bfin_write_MDMA_S0_START_ADDR(val) 	bfin_write32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val) 	bfin_write32(MDMA_S0_START_ADDR, val)
 #define bfin_read_MDMA_S0_CONFIG()		bfin_read16(MDMA_S0_CONFIG)
 #define bfin_write_MDMA_S0_CONFIG(val)		bfin_write16(MDMA_S0_CONFIG, val)
 #define bfin_read_MDMA_S0_X_COUNT()		bfin_read16(MDMA_S0_X_COUNT)
 #define bfin_write_MDMA_S0_X_COUNT(val)		bfin_write16(MDMA_S0_X_COUNT, val)
 #define bfin_read_MDMA_S0_X_MODIFY()		bfin_read16(MDMA_S0_X_MODIFY)
-#define bfin_write_MDMA_S0_X_MODIFY(val) 	bfin_write16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val) 	bfin_write16(MDMA_S0_X_MODIFY, val)
 #define bfin_read_MDMA_S0_Y_COUNT()		bfin_read16(MDMA_S0_Y_COUNT)
 #define bfin_write_MDMA_S0_Y_COUNT(val)		bfin_write16(MDMA_S0_Y_COUNT, val)
 #define bfin_read_MDMA_S0_Y_MODIFY()		bfin_read16(MDMA_S0_Y_MODIFY)
-#define bfin_write_MDMA_S0_Y_MODIFY(val) 	bfin_write16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val) 	bfin_write16(MDMA_S0_Y_MODIFY, val)
 #define bfin_read_MDMA_S0_CURR_DESC_PTR() 	bfin_read32(MDMA_S0_CURR_DESC_PTR)
-#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) 	bfin_write32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) 	bfin_write32(MDMA_S0_CURR_DESC_PTR, val)
 #define bfin_read_MDMA_S0_CURR_ADDR() 		bfin_read32(MDMA_S0_CURR_ADDR)
-#define bfin_write_MDMA_S0_CURR_ADDR(val) 	bfin_write32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val) 	bfin_write32(MDMA_S0_CURR_ADDR, val)
 #define bfin_read_MDMA_S0_IRQ_STATUS()		bfin_read16(MDMA_S0_IRQ_STATUS)
 #define bfin_write_MDMA_S0_IRQ_STATUS(val)	bfin_write16(MDMA_S0_IRQ_STATUS, val)
 #define bfin_read_MDMA_S0_PERIPHERAL_MAP()	bfin_read16(MDMA_S0_PERIPHERAL_MAP)
@@ -763,9 +769,9 @@
 /* MDMA Stream 1 Registers */
 
 #define bfin_read_MDMA_D1_NEXT_DESC_PTR() 	bfin_read32(MDMA_D1_NEXT_DESC_PTR)
-#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_D1_NEXT_DESC_PTR, val)
 #define bfin_read_MDMA_D1_START_ADDR() 		bfin_read32(MDMA_D1_START_ADDR)
-#define bfin_write_MDMA_D1_START_ADDR(val) 	bfin_write32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val) 	bfin_write32(MDMA_D1_START_ADDR, val)
 #define bfin_read_MDMA_D1_CONFIG()		bfin_read16(MDMA_D1_CONFIG)
 #define bfin_write_MDMA_D1_CONFIG(val)		bfin_write16(MDMA_D1_CONFIG, val)
 #define bfin_read_MDMA_D1_X_COUNT()		bfin_read16(MDMA_D1_X_COUNT)
@@ -777,9 +783,9 @@
 #define bfin_read_MDMA_D1_Y_MODIFY()		bfin_read16(MDMA_D1_Y_MODIFY)
 #define bfin_write_MDMA_D1_Y_MODIFY(val) 	bfin_write16(MDMA_D1_Y_MODIFY)
 #define bfin_read_MDMA_D1_CURR_DESC_PTR() 	bfin_read32(MDMA_D1_CURR_DESC_PTR)
-#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) 	bfin_write32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) 	bfin_write32(MDMA_D1_CURR_DESC_PTR, val)
 #define bfin_read_MDMA_D1_CURR_ADDR() 		bfin_read32(MDMA_D1_CURR_ADDR)
-#define bfin_write_MDMA_D1_CURR_ADDR(val) 	bfin_write32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val) 	bfin_write32(MDMA_D1_CURR_ADDR, val)
 #define bfin_read_MDMA_D1_IRQ_STATUS()		bfin_read16(MDMA_D1_IRQ_STATUS)
 #define bfin_write_MDMA_D1_IRQ_STATUS(val)	bfin_write16(MDMA_D1_IRQ_STATUS, val)
 #define bfin_read_MDMA_D1_PERIPHERAL_MAP()	bfin_read16(MDMA_D1_PERIPHERAL_MAP)
@@ -789,9 +795,9 @@
 #define bfin_read_MDMA_D1_CURR_Y_COUNT()	bfin_read16(MDMA_D1_CURR_Y_COUNT)
 #define bfin_write_MDMA_D1_CURR_Y_COUNT(val)	bfin_write16(MDMA_D1_CURR_Y_COUNT, val)
 #define bfin_read_MDMA_S1_NEXT_DESC_PTR() 	bfin_read32(MDMA_S1_NEXT_DESC_PTR)
-#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_S1_NEXT_DESC_PTR, val)
 #define bfin_read_MDMA_S1_START_ADDR() 		bfin_read32(MDMA_S1_START_ADDR)
-#define bfin_write_MDMA_S1_START_ADDR(val) 	bfin_write32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val) 	bfin_write32(MDMA_S1_START_ADDR, val)
 #define bfin_read_MDMA_S1_CONFIG()		bfin_read16(MDMA_S1_CONFIG)
 #define bfin_write_MDMA_S1_CONFIG(val)		bfin_write16(MDMA_S1_CONFIG, val)
 #define bfin_read_MDMA_S1_X_COUNT()		bfin_read16(MDMA_S1_X_COUNT)
@@ -803,9 +809,9 @@
 #define bfin_read_MDMA_S1_Y_MODIFY()		bfin_read16(MDMA_S1_Y_MODIFY)
 #define bfin_write_MDMA_S1_Y_MODIFY(val) 	bfin_write16(MDMA_S1_Y_MODIFY)
 #define bfin_read_MDMA_S1_CURR_DESC_PTR() 	bfin_read32(MDMA_S1_CURR_DESC_PTR)
-#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) 	bfin_write32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) 	bfin_write32(MDMA_S1_CURR_DESC_PTR, val)
 #define bfin_read_MDMA_S1_CURR_ADDR() 		bfin_read32(MDMA_S1_CURR_ADDR)
-#define bfin_write_MDMA_S1_CURR_ADDR(val) 	bfin_write32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val) 	bfin_write32(MDMA_S1_CURR_ADDR, val)
 #define bfin_read_MDMA_S1_IRQ_STATUS()		bfin_read16(MDMA_S1_IRQ_STATUS)
 #define bfin_write_MDMA_S1_IRQ_STATUS(val)	bfin_write16(MDMA_S1_IRQ_STATUS, val)
 #define bfin_read_MDMA_S1_PERIPHERAL_MAP()	bfin_read16(MDMA_S1_PERIPHERAL_MAP)
diff --git a/include/asm-blackfin/mach-bf548/defBF542.h b/include/asm-blackfin/mach-bf548/defBF542.h
index ac968fc..32d0713 100644
--- a/include/asm-blackfin/mach-bf548/defBF542.h
+++ b/include/asm-blackfin/mach-bf548/defBF542.h
@@ -362,7 +362,6 @@
 /* Bit masks for KPAD_CTL */
 
 #define                   KPAD_EN  0x1        /* Keypad Enable */
-#define                  nKPAD_EN  0x0       
 #define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
 #define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
 #define                KPAD_COLEN  0xe000     /* Column Enable Width */
@@ -384,29 +383,21 @@
 /* Bit masks for KPAD_STAT */
 
 #define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
-#define                 nKPAD_IRQ  0x0       
 #define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
 #define              KPAD_PRESSED  0x8        /* Key press current status */
-#define             nKPAD_PRESSED  0x0       
 
 /* Bit masks for KPAD_SOFTEVAL */
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
-#define          nKPAD_SOFTEVAL_E  0x0       
 
 /* Bit masks for SDH_COMMAND */
 
 #define                   CMD_IDX  0x3f       /* Command Index */
 #define                   CMD_RSP  0x40       /* Response */
-#define                  nCMD_RSP  0x0       
 #define                 CMD_L_RSP  0x80       /* Long Response */
-#define                nCMD_L_RSP  0x0       
 #define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                nCMD_INT_E  0x0       
 #define                CMD_PEND_E  0x200      /* Command Pending */
-#define               nCMD_PEND_E  0x0       
 #define                     CMD_E  0x400      /* Command Enable */
-#define                    nCMD_E  0x0       
 
 /* Bit masks for SDH_PWR_CTL */
 
@@ -415,21 +406,15 @@
 #define                       TBD  0x3c       /* TBD */
 #endif
 #define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                nSD_CMD_OD  0x0       
 #define                   ROD_CTL  0x80       /* Rod Control */
-#define                  nROD_CTL  0x0       
 
 /* Bit masks for SDH_CLK_CTL */
 
 #define                    CLKDIV  0xff       /* MC_CLK Divisor */
 #define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                    nCLK_E  0x0       
 #define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define                 nPWR_SV_E  0x0       
 #define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define            nCLKDIV_BYPASS  0x0       
 #define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-#define                 nWIDE_BUS  0x0       
 
 /* Bit masks for SDH_RESP_CMD */
 
@@ -438,133 +423,74 @@
 /* Bit masks for SDH_DATA_CTL */
 
 #define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                    nDTX_E  0x0       
 #define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  nDTX_DIR  0x0       
 #define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 nDTX_MODE  0x0       
 #define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define                nDTX_DMA_E  0x0       
 #define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
 
 /* Bit masks for SDH_STATUS */
 
 #define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define             nCMD_CRC_FAIL  0x0       
 #define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define             nDAT_CRC_FAIL  0x0       
 #define               CMD_TIMEOUT  0x4        /* CMD Time Out */
-#define              nCMD_TIMEOUT  0x0       
 #define               DAT_TIMEOUT  0x8        /* Data Time Out */
-#define              nDAT_TIMEOUT  0x0       
 #define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define              nTX_UNDERRUN  0x0       
 #define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define               nRX_OVERRUN  0x0       
 #define              CMD_RESP_END  0x40       /* CMD Response End */
-#define             nCMD_RESP_END  0x0       
 #define                  CMD_SENT  0x80       /* CMD Sent */
-#define                 nCMD_SENT  0x0       
 #define                   DAT_END  0x100      /* Data End */
-#define                  nDAT_END  0x0       
 #define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define            nSTART_BIT_ERR  0x0       
 #define               DAT_BLK_END  0x400      /* Data Block End */
-#define              nDAT_BLK_END  0x0       
 #define                   CMD_ACT  0x800      /* CMD Active */
-#define                  nCMD_ACT  0x0       
 #define                    TX_ACT  0x1000     /* Transmit Active */
-#define                   nTX_ACT  0x0       
 #define                    RX_ACT  0x2000     /* Receive Active */
-#define                   nRX_ACT  0x0       
 #define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define             nTX_FIFO_STAT  0x0       
 #define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define             nRX_FIFO_STAT  0x0       
 #define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define             nTX_FIFO_FULL  0x0       
 #define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define             nRX_FIFO_FULL  0x0       
 #define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define             nTX_FIFO_ZERO  0x0       
 #define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define              nRX_DAT_ZERO  0x0       
 #define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               nTX_DAT_RDY  0x0       
 #define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-#define              nRX_FIFO_RDY  0x0       
 
 /* Bit masks for SDH_STATUS_CLR */
 
 #define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define        nCMD_CRC_FAIL_STAT  0x0       
 #define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define        nDAT_CRC_FAIL_STAT  0x0       
 #define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define         nCMD_TIMEOUT_STAT  0x0       
 #define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define         nDAT_TIMEOUT_STAT  0x0       
 #define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define         nTX_UNDERRUN_STAT  0x0       
 #define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define          nRX_OVERRUN_STAT  0x0       
 #define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define        nCMD_RESP_END_STAT  0x0       
 #define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define            nCMD_SENT_STAT  0x0       
 #define              DAT_END_STAT  0x100      /* Data End Status */
-#define             nDAT_END_STAT  0x0       
 #define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define       nSTART_BIT_ERR_STAT  0x0       
 #define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-#define         nDAT_BLK_END_STAT  0x0       
 
 /* Bit masks for SDH_MASK0 */
 
 #define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define        nCMD_CRC_FAIL_MASK  0x0       
 #define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define        nDAT_CRC_FAIL_MASK  0x0       
 #define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define         nCMD_TIMEOUT_MASK  0x0       
 #define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define         nDAT_TIMEOUT_MASK  0x0       
 #define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define         nTX_UNDERRUN_MASK  0x0       
 #define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define          nRX_OVERRUN_MASK  0x0       
 #define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define        nCMD_RESP_END_MASK  0x0       
 #define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define            nCMD_SENT_MASK  0x0       
 #define              DAT_END_MASK  0x100      /* Data End Mask */
-#define             nDAT_END_MASK  0x0       
 #define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define       nSTART_BIT_ERR_MASK  0x0       
 #define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define         nDAT_BLK_END_MASK  0x0       
 #define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define             nCMD_ACT_MASK  0x0       
 #define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define              nTX_ACT_MASK  0x0       
 #define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define              nRX_ACT_MASK  0x0       
 #define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define        nTX_FIFO_STAT_MASK  0x0       
 #define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define        nRX_FIFO_STAT_MASK  0x0       
 #define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define        nTX_FIFO_FULL_MASK  0x0       
 #define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define        nRX_FIFO_FULL_MASK  0x0       
 #define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define        nTX_FIFO_ZERO_MASK  0x0       
 #define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define         nRX_DAT_ZERO_MASK  0x0       
 #define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          nTX_DAT_RDY_MASK  0x0       
 #define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-#define         nRX_FIFO_RDY_MASK  0x0       
 
 /* Bit masks for SDH_FIFO_CNT */
 
@@ -573,73 +499,47 @@
 /* Bit masks for SDH_E_STATUS */
 
 #define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define             nSDIO_INT_DET  0x0       
 #define               SD_CARD_DET  0x10       /* SD Card Detect */
-#define              nSD_CARD_DET  0x0       
 
 /* Bit masks for SDH_E_MASK */
 
 #define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                 nSDIO_MSK  0x0       
 #define                   SCD_MSK  0x40       /* Mask Card Detect */
-#define                  nSCD_MSK  0x0       
 
 /* Bit masks for SDH_CFG */
 
 #define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                  nCLKS_EN  0x0       
 #define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                     nSD4E  0x0       
 #define                       MWE  0x8        /* Moving Window Enable */
-#define                      nMWE  0x0       
 #define                    SD_RST  0x10       /* SDMMC Reset */
-#define                   nSD_RST  0x0       
 #define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                nPUP_SDDAT  0x0       
 #define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define               nPUP_SDDAT3  0x0       
 #define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-#define                nPD_SDDAT3  0x0       
 
 /* Bit masks for SDH_RD_WAIT_EN */
 
 #define                       RWR  0x1        /* Read Wait Request */
-#define                      nRWR  0x0       
 
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
-#define                nPIO_START  0x0       
 #define               MULTI_START  0x2        /* Start Multi-DMA Op */
-#define              nMULTI_START  0x0       
 #define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
-#define              nULTRA_START  0x0       
 #define                  XFER_DIR  0x8        /* Transfer Direction */
-#define                 nXFER_DIR  0x0       
 #define                  IORDY_EN  0x10       /* IORDY Enable */
-#define                 nIORDY_EN  0x0       
 #define                FIFO_FLUSH  0x20       /* Flush FIFOs */
-#define               nFIFO_FLUSH  0x0       
 #define                  SOFT_RST  0x40       /* Soft Reset */
-#define                 nSOFT_RST  0x0       
 #define                   DEV_RST  0x80       /* Device Reset */
-#define                  nDEV_RST  0x0       
 #define                TFRCNT_RST  0x100      /* Trans Count Reset */
-#define               nTFRCNT_RST  0x0       
 #define               END_ON_TERM  0x200      /* End/Terminate Select */
-#define              nEND_ON_TERM  0x0       
 #define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
-#define              nPIO_USE_DMA  0x0       
 #define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
 
 /* Bit masks for ATAPI_STATUS */
 
 #define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
-#define              nPIO_XFER_ON  0x0       
 #define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
-#define            nMULTI_XFER_ON  0x0       
 #define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
-#define            nULTRA_XFER_ON  0x0       
 #define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
 
 /* Bit masks for ATAPI_DEV_ADDR */
@@ -649,66 +549,39 @@
 /* Bit masks for ATAPI_INT_MASK */
 
 #define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
-#define       nATAPI_DEV_INT_MASK  0x0       
 #define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
-#define            nPIO_DONE_MASK  0x0       
 #define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
-#define          nMULTI_DONE_MASK  0x0       
 #define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
-#define         nUDMAIN_DONE_MASK  0x0       
 #define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
-#define        nUDMAOUT_DONE_MASK  0x0       
 #define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
-#define      nHOST_TERM_XFER_MASK  0x0       
 #define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
-#define          nMULTI_TERM_MASK  0x0       
 #define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define         nUDMAIN_TERM_MASK  0x0       
 #define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
-#define        nUDMAOUT_TERM_MASK  0x0       
 
 /* Bit masks for ATAPI_INT_STATUS */
 
 #define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
-#define            nATAPI_DEV_INT  0x0       
 #define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
-#define             nPIO_DONE_INT  0x0       
 #define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
-#define           nMULTI_DONE_INT  0x0       
 #define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
-#define          nUDMAIN_DONE_INT  0x0       
 #define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
-#define         nUDMAOUT_DONE_INT  0x0       
 #define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
-#define       nHOST_TERM_XFER_INT  0x0       
 #define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
-#define           nMULTI_TERM_INT  0x0       
 #define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define          nUDMAIN_TERM_INT  0x0       
 #define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
-#define         nUDMAOUT_TERM_INT  0x0       
 
 /* Bit masks for ATAPI_LINE_STATUS */
 
 #define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
-#define               nATAPI_INTR  0x0       
 #define                ATAPI_DASP  0x2        /* Device dasp to host line status */
-#define               nATAPI_DASP  0x0       
 #define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
-#define               nATAPI_CS0N  0x0       
 #define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
-#define               nATAPI_CS1N  0x0       
 #define                ATAPI_ADDR  0x70       /* ATAPI address line status */
 #define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
-#define             nATAPI_DMAREQ  0x0       
 #define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
-#define            nATAPI_DMAACKN  0x0       
 #define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
-#define              nATAPI_DIOWN  0x0       
 #define               ATAPI_DIORN  0x400      /* ATAPI read line status */
-#define              nATAPI_DIORN  0x0       
 #define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
-#define              nATAPI_IORDY  0x0       
 
 /* Bit masks for ATAPI_SM_STATE */
 
@@ -720,7 +593,6 @@
 /* Bit masks for ATAPI_TERMINATE */
 
 #define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
-#define          nATAPI_HOST_TERM  0x0       
 
 /* Bit masks for ATAPI_REG_TIM_0 */
 
@@ -779,131 +651,77 @@
 /* Bit masks for USB_POWER */
 
 #define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
-#define          nENABLE_SUSPENDM  0x0       
 #define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
-#define             nSUSPEND_MODE  0x0       
 #define               RESUME_MODE  0x4        /* DMA Mode */
-#define              nRESUME_MODE  0x0       
 #define                     RESET  0x8        /* Reset indicator */
-#define                    nRESET  0x0       
 #define                   HS_MODE  0x10       /* High Speed mode indicator */
-#define                  nHS_MODE  0x0       
 #define                 HS_ENABLE  0x20       /* high Speed Enable */
-#define                nHS_ENABLE  0x0       
 #define                 SOFT_CONN  0x40       /* Soft connect */
-#define                nSOFT_CONN  0x0       
 #define                ISO_UPDATE  0x80       /* Isochronous update */
-#define               nISO_UPDATE  0x0       
 
 /* Bit masks for USB_INTRTX */
 
 #define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
-#define                   nEP0_TX  0x0       
 #define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
-#define                   nEP1_TX  0x0       
 #define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
-#define                   nEP2_TX  0x0       
 #define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
-#define                   nEP3_TX  0x0       
 #define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
-#define                   nEP4_TX  0x0       
 #define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
-#define                   nEP5_TX  0x0       
 #define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
-#define                   nEP6_TX  0x0       
 #define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
-#define                   nEP7_TX  0x0       
 
 /* Bit masks for USB_INTRRX */
 
 #define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
-#define                   nEP1_RX  0x0       
 #define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
-#define                   nEP2_RX  0x0       
 #define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
-#define                   nEP3_RX  0x0       
 #define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
-#define                   nEP4_RX  0x0       
 #define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
-#define                   nEP5_RX  0x0       
 #define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
-#define                   nEP6_RX  0x0       
 #define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
-#define                   nEP7_RX  0x0       
 
 /* Bit masks for USB_INTRTXE */
 
 #define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
-#define                 nEP0_TX_E  0x0       
 #define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
-#define                 nEP1_TX_E  0x0       
 #define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
-#define                 nEP2_TX_E  0x0       
 #define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
-#define                 nEP3_TX_E  0x0       
 #define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
-#define                 nEP4_TX_E  0x0       
 #define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
-#define                 nEP5_TX_E  0x0       
 #define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
-#define                 nEP6_TX_E  0x0       
 #define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
-#define                 nEP7_TX_E  0x0       
 
 /* Bit masks for USB_INTRRXE */
 
 #define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
-#define                 nEP1_RX_E  0x0       
 #define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
-#define                 nEP2_RX_E  0x0       
 #define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
-#define                 nEP3_RX_E  0x0       
 #define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
-#define                 nEP4_RX_E  0x0       
 #define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
-#define                 nEP5_RX_E  0x0       
 #define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
-#define                 nEP6_RX_E  0x0       
 #define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
-#define                 nEP7_RX_E  0x0       
 
 /* Bit masks for USB_INTRUSB */
 
 #define                 SUSPEND_B  0x1        /* Suspend indicator */
-#define                nSUSPEND_B  0x0       
 #define                  RESUME_B  0x2        /* Resume indicator */
-#define                 nRESUME_B  0x0       
 #define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
-#define         nRESET_OR_BABLE_B  0x0       
 #define                     SOF_B  0x8        /* Start of frame */
-#define                    nSOF_B  0x0       
 #define                    CONN_B  0x10       /* Connection indicator */
-#define                   nCONN_B  0x0       
 #define                  DISCON_B  0x20       /* Disconnect indicator */
-#define                 nDISCON_B  0x0       
 #define             SESSION_REQ_B  0x40       /* Session Request */
-#define            nSESSION_REQ_B  0x0       
 #define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
-#define             nVBUS_ERROR_B  0x0       
 
 /* Bit masks for USB_INTRUSBE */
 
 #define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
-#define               nSUSPEND_BE  0x0       
 #define                 RESUME_BE  0x2        /* Resume indicator int enable */
-#define                nRESUME_BE  0x0       
 #define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
-#define        nRESET_OR_BABLE_BE  0x0       
 #define                    SOF_BE  0x8        /* Start of frame int enable */
-#define                   nSOF_BE  0x0       
 #define                   CONN_BE  0x10       /* Connection indicator int enable */
-#define                  nCONN_BE  0x0       
 #define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
-#define                nDISCON_BE  0x0       
 #define            SESSION_REQ_BE  0x40       /* Session Request int enable */
-#define           nSESSION_REQ_BE  0x0       
 #define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
-#define            nVBUS_ERROR_BE  0x0       
 
 /* Bit masks for USB_FRAME */
 
@@ -916,117 +734,67 @@
 /* Bit masks for USB_GLOBAL_CTL */
 
 #define                GLOBAL_ENA  0x1        /* enables USB module */
-#define               nGLOBAL_ENA  0x0       
 #define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
-#define               nEP1_TX_ENA  0x0       
 #define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
-#define               nEP2_TX_ENA  0x0       
 #define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
-#define               nEP3_TX_ENA  0x0       
 #define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
-#define               nEP4_TX_ENA  0x0       
 #define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
-#define               nEP5_TX_ENA  0x0       
 #define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
-#define               nEP6_TX_ENA  0x0       
 #define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
-#define               nEP7_TX_ENA  0x0       
 #define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
-#define               nEP1_RX_ENA  0x0       
 #define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
-#define               nEP2_RX_ENA  0x0       
 #define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
-#define               nEP3_RX_ENA  0x0       
 #define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
-#define               nEP4_RX_ENA  0x0       
 #define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
-#define               nEP5_RX_ENA  0x0       
 #define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
-#define               nEP6_RX_ENA  0x0       
 #define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
-#define               nEP7_RX_ENA  0x0       
 
 /* Bit masks for USB_OTG_DEV_CTL */
 
 #define                   SESSION  0x1        /* session indicator */
-#define                  nSESSION  0x0       
 #define                  HOST_REQ  0x2        /* Host negotiation request */
-#define                 nHOST_REQ  0x0       
 #define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
-#define                nHOST_MODE  0x0       
 #define                     VBUS0  0x8        /* Vbus level indicator[0] */
-#define                    nVBUS0  0x0       
 #define                     VBUS1  0x10       /* Vbus level indicator[1] */
-#define                    nVBUS1  0x0       
 #define                     LSDEV  0x20       /* Low-speed indicator */
-#define                    nLSDEV  0x0       
 #define                     FSDEV  0x40       /* Full or High-speed indicator */
-#define                    nFSDEV  0x0       
 #define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
-#define                 nB_DEVICE  0x0       
 
 /* Bit masks for USB_OTG_VBUS_IRQ */
 
 #define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
-#define            nDRIVE_VBUS_ON  0x0       
 #define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
-#define           nDRIVE_VBUS_OFF  0x0       
 #define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
-#define          nCHRG_VBUS_START  0x0       
 #define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
-#define            nCHRG_VBUS_END  0x0       
 #define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
-#define       nDISCHRG_VBUS_START  0x0       
 #define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
-#define         nDISCHRG_VBUS_END  0x0       
 
 /* Bit masks for USB_OTG_VBUS_MASK */
 
 #define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
-#define        nDRIVE_VBUS_ON_ENA  0x0       
 #define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
-#define       nDRIVE_VBUS_OFF_ENA  0x0       
 #define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
-#define      nCHRG_VBUS_START_ENA  0x0       
 #define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
-#define        nCHRG_VBUS_END_ENA  0x0       
 #define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
-#define   nDISCHRG_VBUS_START_ENA  0x0       
 #define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
-#define     nDISCHRG_VBUS_END_ENA  0x0       
 
 /* Bit masks for USB_CSR0 */
 
 #define                  RXPKTRDY  0x1        /* data packet receive indicator */
-#define                 nRXPKTRDY  0x0       
 #define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
-#define                 nTXPKTRDY  0x0       
 #define                STALL_SENT  0x4        /* STALL handshake sent */
-#define               nSTALL_SENT  0x0       
 #define                   DATAEND  0x8        /* Data end indicator */
-#define                  nDATAEND  0x0       
 #define                  SETUPEND  0x10       /* Setup end */
-#define                 nSETUPEND  0x0       
 #define                 SENDSTALL  0x20       /* Send STALL handshake */
-#define                nSENDSTALL  0x0       
 #define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
-#define        nSERVICED_RXPKTRDY  0x0       
 #define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
-#define        nSERVICED_SETUPEND  0x0       
 #define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
-#define                nFLUSHFIFO  0x0       
 #define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
-#define         nSTALL_RECEIVED_H  0x0       
 #define                SETUPPKT_H  0x8        /* send Setup token host mode */
-#define               nSETUPPKT_H  0x0       
 #define                   ERROR_H  0x10       /* timeout error indicator host mode */
-#define                  nERROR_H  0x0       
 #define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
-#define                 nREQPKT_H  0x0       
 #define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
-#define              nSTATUSPKT_H  0x0       
 #define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
-#define            nNAK_TIMEOUT_H  0x0       
 
 /* Bit masks for USB_COUNT0 */
 
@@ -1047,37 +815,21 @@
 /* Bit masks for USB_TXCSR */
 
 #define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
-#define               nTXPKTRDY_T  0x0       
 #define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
-#define         nFIFO_NOT_EMPTY_T  0x0       
 #define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
-#define               nUNDERRUN_T  0x0       
 #define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
-#define              nFLUSHFIFO_T  0x0       
 #define              STALL_SEND_T  0x10       /* issue a Stall handshake */
-#define             nSTALL_SEND_T  0x0       
 #define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
-#define             nSTALL_SENT_T  0x0       
 #define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_T  0x0       
 #define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
-#define               nINCOMPTX_T  0x0       
 #define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_T  0x0       
 #define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
-#define       nFORCE_DATATOGGLE_T  0x0       
 #define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_T  0x0       
 #define                     ISO_T  0x4000     /* enable Isochronous transfers */
-#define                    nISO_T  0x0       
 #define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
-#define                nAUTOSET_T  0x0       
 #define                  ERROR_TH  0x4        /* error condition host mode */
-#define                 nERROR_TH  0x0       
 #define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_TH  0x0       
 #define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
-#define           nNAK_TIMEOUT_TH  0x0       
 
 /* Bit masks for USB_TXCOUNT */
 
@@ -1086,45 +838,25 @@
 /* Bit masks for USB_RXCSR */
 
 #define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
-#define               nRXPKTRDY_R  0x0       
 #define               FIFO_FULL_R  0x2        /* FIFO not empty */
-#define              nFIFO_FULL_R  0x0       
 #define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
-#define                nOVERRUN_R  0x0       
 #define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
-#define              nDATAERROR_R  0x0       
 #define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
-#define              nFLUSHFIFO_R  0x0       
 #define              STALL_SEND_R  0x20       /* issue a Stall handshake */
-#define             nSTALL_SEND_R  0x0       
 #define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
-#define             nSTALL_SENT_R  0x0       
 #define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_R  0x0       
 #define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
-#define               nINCOMPRX_R  0x0       
 #define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_R  0x0       
 #define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
-#define                nDISNYET_R  0x0       
 #define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_R  0x0       
 #define                     ISO_R  0x4000     /* enable Isochronous transfers */
-#define                    nISO_R  0x0       
 #define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
-#define              nAUTOCLEAR_R  0x0       
 #define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
-#define                 nERROR_RH  0x0       
 #define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
-#define                nREQPKT_RH  0x0       
 #define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_RH  0x0       
 #define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
-#define              nINCOMPRX_RH  0x0       
 #define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
-#define            nDMAREQMODE_RH  0x0       
 #define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
-#define               nAUTOREQ_RH  0x0       
 
 /* Bit masks for USB_RXCOUNT */
 
@@ -1151,35 +883,22 @@
 /* Bit masks for USB_DMA_INTERRUPT */
 
 #define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
-#define                 nDMA0_INT  0x0       
 #define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
-#define                 nDMA1_INT  0x0       
 #define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
-#define                 nDMA2_INT  0x0       
 #define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
-#define                 nDMA3_INT  0x0       
 #define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
-#define                 nDMA4_INT  0x0       
 #define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
-#define                 nDMA5_INT  0x0       
 #define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
-#define                 nDMA6_INT  0x0       
 #define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
-#define                 nDMA7_INT  0x0       
 
 /* Bit masks for USB_DMAxCONTROL */
 
 #define                   DMA_ENA  0x1        /* DMA enable */
-#define                  nDMA_ENA  0x0       
 #define                 DIRECTION  0x2        /* direction of DMA transfer */
-#define                nDIRECTION  0x0       
 #define                      MODE  0x4        /* DMA Bus error */
-#define                     nMODE  0x0       
 #define                   INT_ENA  0x8        /* Interrupt enable */
-#define                  nINT_ENA  0x0       
 #define                     EPNUM  0xf0       /* EP number */
 #define                  BUSERROR  0x100      /* DMA Bus error */
-#define                 nBUSERROR  0x0       
 
 /* Bit masks for USB_DMAxADDRHIGH */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF544.h b/include/asm-blackfin/mach-bf548/defBF544.h
index 8fc77ea..dd955dc 100644
--- a/include/asm-blackfin/mach-bf548/defBF544.h
+++ b/include/asm-blackfin/mach-bf548/defBF544.h
@@ -538,21 +538,13 @@
 /* Bit masks for PIXC_CTL */
 
 #define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
-#define                  nPIXC_EN  0x0       
 #define                  OVR_A_EN  0x2        /* Overlay A Enable */
-#define                 nOVR_A_EN  0x0       
 #define                  OVR_B_EN  0x4        /* Overlay B Enable */
-#define                 nOVR_B_EN  0x0       
 #define                  IMG_FORM  0x8        /* Image Data Format */
-#define                 nIMG_FORM  0x0       
 #define                  OVR_FORM  0x10       /* Overlay Data Format */
-#define                 nOVR_FORM  0x0       
 #define                  OUT_FORM  0x20       /* Output Data Format */
-#define                 nOUT_FORM  0x0       
 #define                   UDS_MOD  0x40       /* Resampling Mode */
-#define                  nUDS_MOD  0x0       
 #define                     TC_EN  0x80       /* Transparent Color Enable */
-#define                    nTC_EN  0x0       
 #define                  IMG_STAT  0x300      /* Image FIFO Status */
 #define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
 #define                    WM_LVL  0x3000     /* FIFO Watermark Level */
@@ -600,13 +592,9 @@
 /* Bit masks for PIXC_INTRSTAT */
 
 #define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
-#define               nOVR_INT_EN  0x0       
 #define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
-#define               nFRM_INT_EN  0x0       
 #define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
-#define             nOVR_INT_STAT  0x0       
 #define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
-#define             nFRM_INT_STAT  0x0       
 
 /* Bit masks for PIXC_RYCON */
 
@@ -614,7 +602,6 @@
 #define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
 #define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
 #define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nRY_MULT4  0x0       
 
 /* Bit masks for PIXC_GUCON */
 
@@ -622,7 +609,6 @@
 #define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
 #define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
 #define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nGU_MULT4  0x0       
 
 /* Bit masks for PIXC_BVCON */
 
@@ -630,7 +616,6 @@
 #define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
 #define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
 #define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nBV_MULT4  0x0       
 
 /* Bit masks for PIXC_CCBIAS */
 
@@ -647,48 +632,28 @@
 /* Bit masks for HOST_CONTROL */
 
 #define                   HOST_EN  0x1        /* Host Enable */
-#define                  nHOST_EN  0x0       
 #define                  HOST_END  0x2        /* Host Endianess */
-#define                 nHOST_END  0x0       
 #define                 DATA_SIZE  0x4        /* Data Size */
-#define                nDATA_SIZE  0x0       
 #define                  HOST_RST  0x8        /* Host Reset */
-#define                 nHOST_RST  0x0       
 #define                  HRDY_OVR  0x20       /* Host Ready Override */
-#define                 nHRDY_OVR  0x0       
 #define                  INT_MODE  0x40       /* Interrupt Mode */
-#define                 nINT_MODE  0x0       
 #define                     BT_EN  0x80       /* Bus Timeout Enable */
-#define                    nBT_EN  0x0       
 #define                       EHW  0x100      /* Enable Host Write */
-#define                      nEHW  0x0       
 #define                       EHR  0x200      /* Enable Host Read */
-#define                      nEHR  0x0       
 #define                       BDR  0x400      /* Burst DMA Requests */
-#define                      nBDR  0x0       
 
 /* Bit masks for HOST_STATUS */
 
 #define                     READY  0x1        /* DMA Ready */
-#define                    nREADY  0x0       
 #define                  FIFOFULL  0x2        /* FIFO Full */
-#define                 nFIFOFULL  0x0       
 #define                 FIFOEMPTY  0x4        /* FIFO Empty */
-#define                nFIFOEMPTY  0x0       
 #define                  COMPLETE  0x8        /* DMA Complete */
-#define                 nCOMPLETE  0x0       
 #define                      HSHK  0x10       /* Host Handshake */
-#define                     nHSHK  0x0       
 #define                   TIMEOUT  0x20       /* Host Timeout */
-#define                  nTIMEOUT  0x0       
 #define                      HIRQ  0x40       /* Host Interrupt Request */
-#define                     nHIRQ  0x0       
 #define                ALLOW_CNFG  0x80       /* Allow New Configuration */
-#define               nALLOW_CNFG  0x0       
 #define                   DMA_DIR  0x100      /* DMA Direction */
-#define                  nDMA_DIR  0x0       
 #define                       BTE  0x200      /* Bus Timeout Enabled */
-#define                      nBTE  0x0       
 
 /* Bit masks for HOST_TIMEOUT */
 
@@ -697,67 +662,42 @@
 /* Bit masks for TIMER_ENABLE1 */
 
 #define                    TIMEN8  0x1        /* Timer 8 Enable */
-#define                   nTIMEN8  0x0       
 #define                    TIMEN9  0x2        /* Timer 9 Enable */
-#define                   nTIMEN9  0x0       
 #define                   TIMEN10  0x4        /* Timer 10 Enable */
-#define                  nTIMEN10  0x0       
 
 /* Bit masks for TIMER_DISABLE1 */
 
 #define                   TIMDIS8  0x1        /* Timer 8 Disable */
-#define                  nTIMDIS8  0x0       
 #define                   TIMDIS9  0x2        /* Timer 9 Disable */
-#define                  nTIMDIS9  0x0       
 #define                  TIMDIS10  0x4        /* Timer 10 Disable */
-#define                 nTIMDIS10  0x0       
 
 /* Bit masks for TIMER_STATUS1 */
 
 #define                    TIMIL8  0x1        /* Timer 8 Interrupt */
-#define                   nTIMIL8  0x0       
 #define                    TIMIL9  0x2        /* Timer 9 Interrupt */
-#define                   nTIMIL9  0x0       
 #define                   TIMIL10  0x4        /* Timer 10 Interrupt */
-#define                  nTIMIL10  0x0       
 #define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
-#define                nTOVF_ERR8  0x0       
 #define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
-#define                nTOVF_ERR9  0x0       
 #define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
-#define               nTOVF_ERR10  0x0       
 #define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
-#define                    nTRUN8  0x0       
 #define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
-#define                    nTRUN9  0x0       
 #define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
-#define                   nTRUN10  0x0       
 
 /* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
 
 /* Bit masks for HMDMAx_CONTROL */
 
 #define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
-#define                  nHMDMAEN  0x0       
 #define                       REP  0x2        /* Handshake MDMA Request Polarity */
-#define                      nREP  0x0       
 #define                       UTE  0x8        /* Urgency Threshold Enable */
-#define                      nUTE  0x0       
 #define                       OIE  0x10       /* Overflow Interrupt Enable */
-#define                      nOIE  0x0       
 #define                      BDIE  0x20       /* Block Done Interrupt Enable */
-#define                     nBDIE  0x0       
 #define                      MBDI  0x40       /* Mask Block Done Interrupt */
-#define                     nMBDI  0x0       
 #define                       DRQ  0x300      /* Handshake MDMA Request Type */
 #define                       RBC  0x1000     /* Force Reload of BCOUNT */
-#define                      nRBC  0x0       
 #define                        PS  0x2000     /* Pin Status */
-#define                       nPS  0x0       
 #define                        OI  0x4000     /* Overflow Interrupt Generated */
-#define                       nOI  0x0       
 #define                       BDI  0x8000     /* Block Done Interrupt Generated */
-#define                      nBDI  0x0       
 
 /* ******************************************* */
 /*     MULTI BIT MACRO ENUMERATIONS            */
diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/include/asm-blackfin/mach-bf548/defBF548.h
index d9e3062..8d4214e 100644
--- a/include/asm-blackfin/mach-bf548/defBF548.h
+++ b/include/asm-blackfin/mach-bf548/defBF548.h
@@ -899,21 +899,13 @@
 /* Bit masks for PIXC_CTL */
 
 #define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
-#define                  nPIXC_EN  0x0       
 #define                  OVR_A_EN  0x2        /* Overlay A Enable */
-#define                 nOVR_A_EN  0x0       
 #define                  OVR_B_EN  0x4        /* Overlay B Enable */
-#define                 nOVR_B_EN  0x0       
 #define                  IMG_FORM  0x8        /* Image Data Format */
-#define                 nIMG_FORM  0x0       
 #define                  OVR_FORM  0x10       /* Overlay Data Format */
-#define                 nOVR_FORM  0x0       
 #define                  OUT_FORM  0x20       /* Output Data Format */
-#define                 nOUT_FORM  0x0       
 #define                   UDS_MOD  0x40       /* Resampling Mode */
-#define                  nUDS_MOD  0x0       
 #define                     TC_EN  0x80       /* Transparent Color Enable */
-#define                    nTC_EN  0x0       
 #define                  IMG_STAT  0x300      /* Image FIFO Status */
 #define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
 #define                    WM_LVL  0x3000     /* FIFO Watermark Level */
@@ -961,13 +953,9 @@
 /* Bit masks for PIXC_INTRSTAT */
 
 #define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
-#define               nOVR_INT_EN  0x0       
 #define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
-#define               nFRM_INT_EN  0x0       
 #define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
-#define             nOVR_INT_STAT  0x0       
 #define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
-#define             nFRM_INT_STAT  0x0       
 
 /* Bit masks for PIXC_RYCON */
 
@@ -975,7 +963,6 @@
 #define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
 #define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
 #define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nRY_MULT4  0x0       
 
 /* Bit masks for PIXC_GUCON */
 
@@ -983,7 +970,6 @@
 #define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
 #define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
 #define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nGU_MULT4  0x0       
 
 /* Bit masks for PIXC_BVCON */
 
@@ -991,7 +977,6 @@
 #define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
 #define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
 #define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nBV_MULT4  0x0       
 
 /* Bit masks for PIXC_CCBIAS */
 
@@ -1008,48 +993,28 @@
 /* Bit masks for HOST_CONTROL */
 
 #define                   HOST_EN  0x1        /* Host Enable */
-#define                  nHOST_EN  0x0       
 #define                  HOST_END  0x2        /* Host Endianess */
-#define                 nHOST_END  0x0       
 #define                 DATA_SIZE  0x4        /* Data Size */
-#define                nDATA_SIZE  0x0       
 #define                  HOST_RST  0x8        /* Host Reset */
-#define                 nHOST_RST  0x0       
 #define                  HRDY_OVR  0x20       /* Host Ready Override */
-#define                 nHRDY_OVR  0x0       
 #define                  INT_MODE  0x40       /* Interrupt Mode */
-#define                 nINT_MODE  0x0       
 #define                     BT_EN  0x80       /* Bus Timeout Enable */
-#define                    nBT_EN  0x0       
 #define                       EHW  0x100      /* Enable Host Write */
-#define                      nEHW  0x0       
 #define                       EHR  0x200      /* Enable Host Read */
-#define                      nEHR  0x0       
 #define                       BDR  0x400      /* Burst DMA Requests */
-#define                      nBDR  0x0       
 
 /* Bit masks for HOST_STATUS */
 
 #define                     READY  0x1        /* DMA Ready */
-#define                    nREADY  0x0       
 #define                  FIFOFULL  0x2        /* FIFO Full */
-#define                 nFIFOFULL  0x0       
 #define                 FIFOEMPTY  0x4        /* FIFO Empty */
-#define                nFIFOEMPTY  0x0       
 #define                  COMPLETE  0x8        /* DMA Complete */
-#define                 nCOMPLETE  0x0       
 #define                      HSHK  0x10       /* Host Handshake */
-#define                     nHSHK  0x0       
 #define                   TIMEOUT  0x20       /* Host Timeout */
-#define                  nTIMEOUT  0x0       
 #define                      HIRQ  0x40       /* Host Interrupt Request */
-#define                     nHIRQ  0x0       
 #define                ALLOW_CNFG  0x80       /* Allow New Configuration */
-#define               nALLOW_CNFG  0x0       
 #define                   DMA_DIR  0x100      /* DMA Direction */
-#define                  nDMA_DIR  0x0       
 #define                       BTE  0x200      /* Bus Timeout Enabled */
-#define                      nBTE  0x0       
 
 /* Bit masks for HOST_TIMEOUT */
 
@@ -1058,7 +1023,6 @@
 /* Bit masks for KPAD_CTL */
 
 #define                   KPAD_EN  0x1        /* Keypad Enable */
-#define                  nKPAD_EN  0x0       
 #define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
 #define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
 #define                KPAD_COLEN  0xe000     /* Column Enable Width */
@@ -1080,29 +1044,21 @@
 /* Bit masks for KPAD_STAT */
 
 #define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
-#define                 nKPAD_IRQ  0x0       
 #define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
 #define              KPAD_PRESSED  0x8        /* Key press current status */
-#define             nKPAD_PRESSED  0x0       
 
 /* Bit masks for KPAD_SOFTEVAL */
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
-#define          nKPAD_SOFTEVAL_E  0x0       
 
 /* Bit masks for SDH_COMMAND */
 
 #define                   CMD_IDX  0x3f       /* Command Index */
 #define                   CMD_RSP  0x40       /* Response */
-#define                  nCMD_RSP  0x0       
 #define                 CMD_L_RSP  0x80       /* Long Response */
-#define                nCMD_L_RSP  0x0       
 #define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                nCMD_INT_E  0x0       
 #define                CMD_PEND_E  0x200      /* Command Pending */
-#define               nCMD_PEND_E  0x0       
 #define                     CMD_E  0x400      /* Command Enable */
-#define                    nCMD_E  0x0       
 
 /* Bit masks for SDH_PWR_CTL */
 
@@ -1111,21 +1067,15 @@
 #define                       TBD  0x3c       /* TBD */
 #endif
 #define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                nSD_CMD_OD  0x0       
 #define                   ROD_CTL  0x80       /* Rod Control */
-#define                  nROD_CTL  0x0       
 
 /* Bit masks for SDH_CLK_CTL */
 
 #define                    CLKDIV  0xff       /* MC_CLK Divisor */
 #define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                    nCLK_E  0x0       
 #define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define                 nPWR_SV_E  0x0       
 #define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define            nCLKDIV_BYPASS  0x0       
 #define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-#define                 nWIDE_BUS  0x0       
 
 /* Bit masks for SDH_RESP_CMD */
 
@@ -1134,133 +1084,74 @@
 /* Bit masks for SDH_DATA_CTL */
 
 #define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                    nDTX_E  0x0       
 #define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  nDTX_DIR  0x0       
 #define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 nDTX_MODE  0x0       
 #define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define                nDTX_DMA_E  0x0       
 #define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
 
 /* Bit masks for SDH_STATUS */
 
 #define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define             nCMD_CRC_FAIL  0x0       
 #define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define             nDAT_CRC_FAIL  0x0       
 #define               CMD_TIMEOUT  0x4        /* CMD Time Out */
-#define              nCMD_TIMEOUT  0x0       
 #define               DAT_TIMEOUT  0x8        /* Data Time Out */
-#define              nDAT_TIMEOUT  0x0       
 #define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define              nTX_UNDERRUN  0x0       
 #define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define               nRX_OVERRUN  0x0       
 #define              CMD_RESP_END  0x40       /* CMD Response End */
-#define             nCMD_RESP_END  0x0       
 #define                  CMD_SENT  0x80       /* CMD Sent */
-#define                 nCMD_SENT  0x0       
 #define                   DAT_END  0x100      /* Data End */
-#define                  nDAT_END  0x0       
 #define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define            nSTART_BIT_ERR  0x0       
 #define               DAT_BLK_END  0x400      /* Data Block End */
-#define              nDAT_BLK_END  0x0       
 #define                   CMD_ACT  0x800      /* CMD Active */
-#define                  nCMD_ACT  0x0       
 #define                    TX_ACT  0x1000     /* Transmit Active */
-#define                   nTX_ACT  0x0       
 #define                    RX_ACT  0x2000     /* Receive Active */
-#define                   nRX_ACT  0x0       
 #define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define             nTX_FIFO_STAT  0x0       
 #define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define             nRX_FIFO_STAT  0x0       
 #define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define             nTX_FIFO_FULL  0x0       
 #define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define             nRX_FIFO_FULL  0x0       
 #define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define             nTX_FIFO_ZERO  0x0       
 #define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define              nRX_DAT_ZERO  0x0       
 #define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               nTX_DAT_RDY  0x0       
 #define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-#define              nRX_FIFO_RDY  0x0       
 
 /* Bit masks for SDH_STATUS_CLR */
 
 #define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define        nCMD_CRC_FAIL_STAT  0x0       
 #define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define        nDAT_CRC_FAIL_STAT  0x0       
 #define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define         nCMD_TIMEOUT_STAT  0x0       
 #define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define         nDAT_TIMEOUT_STAT  0x0       
 #define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define         nTX_UNDERRUN_STAT  0x0       
 #define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define          nRX_OVERRUN_STAT  0x0       
 #define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define        nCMD_RESP_END_STAT  0x0       
 #define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define            nCMD_SENT_STAT  0x0       
 #define              DAT_END_STAT  0x100      /* Data End Status */
-#define             nDAT_END_STAT  0x0       
 #define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define       nSTART_BIT_ERR_STAT  0x0       
 #define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-#define         nDAT_BLK_END_STAT  0x0       
 
 /* Bit masks for SDH_MASK0 */
 
 #define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define        nCMD_CRC_FAIL_MASK  0x0       
 #define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define        nDAT_CRC_FAIL_MASK  0x0       
 #define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define         nCMD_TIMEOUT_MASK  0x0       
 #define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define         nDAT_TIMEOUT_MASK  0x0       
 #define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define         nTX_UNDERRUN_MASK  0x0       
 #define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define          nRX_OVERRUN_MASK  0x0       
 #define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define        nCMD_RESP_END_MASK  0x0       
 #define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define            nCMD_SENT_MASK  0x0       
 #define              DAT_END_MASK  0x100      /* Data End Mask */
-#define             nDAT_END_MASK  0x0       
 #define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define       nSTART_BIT_ERR_MASK  0x0       
 #define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define         nDAT_BLK_END_MASK  0x0       
 #define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define             nCMD_ACT_MASK  0x0       
 #define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define              nTX_ACT_MASK  0x0       
 #define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define              nRX_ACT_MASK  0x0       
 #define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define        nTX_FIFO_STAT_MASK  0x0       
 #define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define        nRX_FIFO_STAT_MASK  0x0       
 #define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define        nTX_FIFO_FULL_MASK  0x0       
 #define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define        nRX_FIFO_FULL_MASK  0x0       
 #define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define        nTX_FIFO_ZERO_MASK  0x0       
 #define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define         nRX_DAT_ZERO_MASK  0x0       
 #define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          nTX_DAT_RDY_MASK  0x0       
 #define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-#define         nRX_FIFO_RDY_MASK  0x0       
 
 /* Bit masks for SDH_FIFO_CNT */
 
@@ -1269,73 +1160,47 @@
 /* Bit masks for SDH_E_STATUS */
 
 #define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define             nSDIO_INT_DET  0x0       
 #define               SD_CARD_DET  0x10       /* SD Card Detect */
-#define              nSD_CARD_DET  0x0       
 
 /* Bit masks for SDH_E_MASK */
 
 #define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                 nSDIO_MSK  0x0       
 #define                   SCD_MSK  0x40       /* Mask Card Detect */
-#define                  nSCD_MSK  0x0       
 
 /* Bit masks for SDH_CFG */
 
 #define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                  nCLKS_EN  0x0       
 #define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                     nSD4E  0x0       
 #define                       MWE  0x8        /* Moving Window Enable */
-#define                      nMWE  0x0       
 #define                    SD_RST  0x10       /* SDMMC Reset */
-#define                   nSD_RST  0x0       
 #define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                nPUP_SDDAT  0x0       
 #define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define               nPUP_SDDAT3  0x0       
 #define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-#define                nPD_SDDAT3  0x0       
 
 /* Bit masks for SDH_RD_WAIT_EN */
 
 #define                       RWR  0x1        /* Read Wait Request */
-#define                      nRWR  0x0       
 
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
-#define                nPIO_START  0x0       
 #define               MULTI_START  0x2        /* Start Multi-DMA Op */
-#define              nMULTI_START  0x0       
 #define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
-#define              nULTRA_START  0x0       
 #define                  XFER_DIR  0x8        /* Transfer Direction */
-#define                 nXFER_DIR  0x0       
 #define                  IORDY_EN  0x10       /* IORDY Enable */
-#define                 nIORDY_EN  0x0       
 #define                FIFO_FLUSH  0x20       /* Flush FIFOs */
-#define               nFIFO_FLUSH  0x0       
 #define                  SOFT_RST  0x40       /* Soft Reset */
-#define                 nSOFT_RST  0x0       
 #define                   DEV_RST  0x80       /* Device Reset */
-#define                  nDEV_RST  0x0       
 #define                TFRCNT_RST  0x100      /* Trans Count Reset */
-#define               nTFRCNT_RST  0x0       
 #define               END_ON_TERM  0x200      /* End/Terminate Select */
-#define              nEND_ON_TERM  0x0       
 #define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
-#define              nPIO_USE_DMA  0x0       
 #define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
 
 /* Bit masks for ATAPI_STATUS */
 
 #define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
-#define              nPIO_XFER_ON  0x0       
 #define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
-#define            nMULTI_XFER_ON  0x0       
 #define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
-#define            nULTRA_XFER_ON  0x0       
 #define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
 
 /* Bit masks for ATAPI_DEV_ADDR */
@@ -1345,66 +1210,39 @@
 /* Bit masks for ATAPI_INT_MASK */
 
 #define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
-#define       nATAPI_DEV_INT_MASK  0x0       
 #define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
-#define            nPIO_DONE_MASK  0x0       
 #define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
-#define          nMULTI_DONE_MASK  0x0       
 #define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
-#define         nUDMAIN_DONE_MASK  0x0       
 #define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
-#define        nUDMAOUT_DONE_MASK  0x0       
 #define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
-#define      nHOST_TERM_XFER_MASK  0x0       
 #define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
-#define          nMULTI_TERM_MASK  0x0       
 #define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define         nUDMAIN_TERM_MASK  0x0       
 #define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
-#define        nUDMAOUT_TERM_MASK  0x0       
 
 /* Bit masks for ATAPI_INT_STATUS */
 
 #define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
-#define            nATAPI_DEV_INT  0x0       
 #define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
-#define             nPIO_DONE_INT  0x0       
 #define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
-#define           nMULTI_DONE_INT  0x0       
 #define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
-#define          nUDMAIN_DONE_INT  0x0       
 #define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
-#define         nUDMAOUT_DONE_INT  0x0       
 #define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
-#define       nHOST_TERM_XFER_INT  0x0       
 #define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
-#define           nMULTI_TERM_INT  0x0       
 #define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define          nUDMAIN_TERM_INT  0x0       
 #define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
-#define         nUDMAOUT_TERM_INT  0x0       
 
 /* Bit masks for ATAPI_LINE_STATUS */
 
 #define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
-#define               nATAPI_INTR  0x0       
 #define                ATAPI_DASP  0x2        /* Device dasp to host line status */
-#define               nATAPI_DASP  0x0       
 #define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
-#define               nATAPI_CS0N  0x0       
 #define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
-#define               nATAPI_CS1N  0x0       
 #define                ATAPI_ADDR  0x70       /* ATAPI address line status */
 #define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
-#define             nATAPI_DMAREQ  0x0       
 #define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
-#define            nATAPI_DMAACKN  0x0       
 #define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
-#define              nATAPI_DIOWN  0x0       
 #define               ATAPI_DIORN  0x400      /* ATAPI read line status */
-#define              nATAPI_DIORN  0x0       
 #define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
-#define              nATAPI_IORDY  0x0       
 
 /* Bit masks for ATAPI_SM_STATE */
 
@@ -1416,7 +1254,6 @@
 /* Bit masks for ATAPI_TERMINATE */
 
 #define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
-#define          nATAPI_HOST_TERM  0x0       
 
 /* Bit masks for ATAPI_REG_TIM_0 */
 
@@ -1471,41 +1308,26 @@
 /* Bit masks for TIMER_ENABLE1 */
 
 #define                    TIMEN8  0x1        /* Timer 8 Enable */
-#define                   nTIMEN8  0x0       
 #define                    TIMEN9  0x2        /* Timer 9 Enable */
-#define                   nTIMEN9  0x0       
 #define                   TIMEN10  0x4        /* Timer 10 Enable */
-#define                  nTIMEN10  0x0       
 
 /* Bit masks for TIMER_DISABLE1 */
 
 #define                   TIMDIS8  0x1        /* Timer 8 Disable */
-#define                  nTIMDIS8  0x0       
 #define                   TIMDIS9  0x2        /* Timer 9 Disable */
-#define                  nTIMDIS9  0x0       
 #define                  TIMDIS10  0x4        /* Timer 10 Disable */
-#define                 nTIMDIS10  0x0       
 
 /* Bit masks for TIMER_STATUS1 */
 
 #define                    TIMIL8  0x1        /* Timer 8 Interrupt */
-#define                   nTIMIL8  0x0       
 #define                    TIMIL9  0x2        /* Timer 9 Interrupt */
-#define                   nTIMIL9  0x0       
 #define                   TIMIL10  0x4        /* Timer 10 Interrupt */
-#define                  nTIMIL10  0x0       
 #define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
-#define                nTOVF_ERR8  0x0       
 #define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
-#define                nTOVF_ERR9  0x0       
 #define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
-#define               nTOVF_ERR10  0x0       
 #define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
-#define                    nTRUN8  0x0       
 #define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
-#define                    nTRUN9  0x0       
 #define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
-#define                   nTRUN10  0x0       
 
 /* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
 
@@ -1516,131 +1338,77 @@
 /* Bit masks for USB_POWER */
 
 #define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
-#define          nENABLE_SUSPENDM  0x0       
 #define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
-#define             nSUSPEND_MODE  0x0       
 #define               RESUME_MODE  0x4        /* DMA Mode */
-#define              nRESUME_MODE  0x0       
 #define                     RESET  0x8        /* Reset indicator */
-#define                    nRESET  0x0       
 #define                   HS_MODE  0x10       /* High Speed mode indicator */
-#define                  nHS_MODE  0x0       
 #define                 HS_ENABLE  0x20       /* high Speed Enable */
-#define                nHS_ENABLE  0x0       
 #define                 SOFT_CONN  0x40       /* Soft connect */
-#define                nSOFT_CONN  0x0       
 #define                ISO_UPDATE  0x80       /* Isochronous update */
-#define               nISO_UPDATE  0x0       
 
 /* Bit masks for USB_INTRTX */
 
 #define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
-#define                   nEP0_TX  0x0       
 #define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
-#define                   nEP1_TX  0x0       
 #define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
-#define                   nEP2_TX  0x0       
 #define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
-#define                   nEP3_TX  0x0       
 #define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
-#define                   nEP4_TX  0x0       
 #define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
-#define                   nEP5_TX  0x0       
 #define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
-#define                   nEP6_TX  0x0       
 #define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
-#define                   nEP7_TX  0x0       
 
 /* Bit masks for USB_INTRRX */
 
 #define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
-#define                   nEP1_RX  0x0       
 #define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
-#define                   nEP2_RX  0x0       
 #define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
-#define                   nEP3_RX  0x0       
 #define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
-#define                   nEP4_RX  0x0       
 #define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
-#define                   nEP5_RX  0x0       
 #define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
-#define                   nEP6_RX  0x0       
 #define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
-#define                   nEP7_RX  0x0       
 
 /* Bit masks for USB_INTRTXE */
 
 #define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
-#define                 nEP0_TX_E  0x0       
 #define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
-#define                 nEP1_TX_E  0x0       
 #define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
-#define                 nEP2_TX_E  0x0       
 #define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
-#define                 nEP3_TX_E  0x0       
 #define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
-#define                 nEP4_TX_E  0x0       
 #define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
-#define                 nEP5_TX_E  0x0       
 #define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
-#define                 nEP6_TX_E  0x0       
 #define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
-#define                 nEP7_TX_E  0x0       
 
 /* Bit masks for USB_INTRRXE */
 
 #define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
-#define                 nEP1_RX_E  0x0       
 #define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
-#define                 nEP2_RX_E  0x0       
 #define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
-#define                 nEP3_RX_E  0x0       
 #define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
-#define                 nEP4_RX_E  0x0       
 #define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
-#define                 nEP5_RX_E  0x0       
 #define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
-#define                 nEP6_RX_E  0x0       
 #define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
-#define                 nEP7_RX_E  0x0       
 
 /* Bit masks for USB_INTRUSB */
 
 #define                 SUSPEND_B  0x1        /* Suspend indicator */
-#define                nSUSPEND_B  0x0       
 #define                  RESUME_B  0x2        /* Resume indicator */
-#define                 nRESUME_B  0x0       
 #define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
-#define         nRESET_OR_BABLE_B  0x0       
 #define                     SOF_B  0x8        /* Start of frame */
-#define                    nSOF_B  0x0       
 #define                    CONN_B  0x10       /* Connection indicator */
-#define                   nCONN_B  0x0       
 #define                  DISCON_B  0x20       /* Disconnect indicator */
-#define                 nDISCON_B  0x0       
 #define             SESSION_REQ_B  0x40       /* Session Request */
-#define            nSESSION_REQ_B  0x0       
 #define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
-#define             nVBUS_ERROR_B  0x0       
 
 /* Bit masks for USB_INTRUSBE */
 
 #define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
-#define               nSUSPEND_BE  0x0       
 #define                 RESUME_BE  0x2        /* Resume indicator int enable */
-#define                nRESUME_BE  0x0       
 #define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
-#define        nRESET_OR_BABLE_BE  0x0       
 #define                    SOF_BE  0x8        /* Start of frame int enable */
-#define                   nSOF_BE  0x0       
 #define                   CONN_BE  0x10       /* Connection indicator int enable */
-#define                  nCONN_BE  0x0       
 #define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
-#define                nDISCON_BE  0x0       
 #define            SESSION_REQ_BE  0x40       /* Session Request int enable */
-#define           nSESSION_REQ_BE  0x0       
 #define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
-#define            nVBUS_ERROR_BE  0x0       
 
 /* Bit masks for USB_FRAME */
 
@@ -1653,117 +1421,67 @@
 /* Bit masks for USB_GLOBAL_CTL */
 
 #define                GLOBAL_ENA  0x1        /* enables USB module */
-#define               nGLOBAL_ENA  0x0       
 #define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
-#define               nEP1_TX_ENA  0x0       
 #define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
-#define               nEP2_TX_ENA  0x0       
 #define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
-#define               nEP3_TX_ENA  0x0       
 #define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
-#define               nEP4_TX_ENA  0x0       
 #define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
-#define               nEP5_TX_ENA  0x0       
 #define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
-#define               nEP6_TX_ENA  0x0       
 #define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
-#define               nEP7_TX_ENA  0x0       
 #define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
-#define               nEP1_RX_ENA  0x0       
 #define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
-#define               nEP2_RX_ENA  0x0       
 #define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
-#define               nEP3_RX_ENA  0x0       
 #define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
-#define               nEP4_RX_ENA  0x0       
 #define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
-#define               nEP5_RX_ENA  0x0       
 #define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
-#define               nEP6_RX_ENA  0x0       
 #define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
-#define               nEP7_RX_ENA  0x0       
 
 /* Bit masks for USB_OTG_DEV_CTL */
 
 #define                   SESSION  0x1        /* session indicator */
-#define                  nSESSION  0x0       
 #define                  HOST_REQ  0x2        /* Host negotiation request */
-#define                 nHOST_REQ  0x0       
 #define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
-#define                nHOST_MODE  0x0       
 #define                     VBUS0  0x8        /* Vbus level indicator[0] */
-#define                    nVBUS0  0x0       
 #define                     VBUS1  0x10       /* Vbus level indicator[1] */
-#define                    nVBUS1  0x0       
 #define                     LSDEV  0x20       /* Low-speed indicator */
-#define                    nLSDEV  0x0       
 #define                     FSDEV  0x40       /* Full or High-speed indicator */
-#define                    nFSDEV  0x0       
 #define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
-#define                 nB_DEVICE  0x0       
 
 /* Bit masks for USB_OTG_VBUS_IRQ */
 
 #define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
-#define            nDRIVE_VBUS_ON  0x0       
 #define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
-#define           nDRIVE_VBUS_OFF  0x0       
 #define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
-#define          nCHRG_VBUS_START  0x0       
 #define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
-#define            nCHRG_VBUS_END  0x0       
 #define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
-#define       nDISCHRG_VBUS_START  0x0       
 #define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
-#define         nDISCHRG_VBUS_END  0x0       
 
 /* Bit masks for USB_OTG_VBUS_MASK */
 
 #define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
-#define        nDRIVE_VBUS_ON_ENA  0x0       
 #define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
-#define       nDRIVE_VBUS_OFF_ENA  0x0       
 #define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
-#define      nCHRG_VBUS_START_ENA  0x0       
 #define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
-#define        nCHRG_VBUS_END_ENA  0x0       
 #define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
-#define   nDISCHRG_VBUS_START_ENA  0x0       
 #define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
-#define     nDISCHRG_VBUS_END_ENA  0x0       
 
 /* Bit masks for USB_CSR0 */
 
 #define                  RXPKTRDY  0x1        /* data packet receive indicator */
-#define                 nRXPKTRDY  0x0       
 #define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
-#define                 nTXPKTRDY  0x0       
 #define                STALL_SENT  0x4        /* STALL handshake sent */
-#define               nSTALL_SENT  0x0       
 #define                   DATAEND  0x8        /* Data end indicator */
-#define                  nDATAEND  0x0       
 #define                  SETUPEND  0x10       /* Setup end */
-#define                 nSETUPEND  0x0       
 #define                 SENDSTALL  0x20       /* Send STALL handshake */
-#define                nSENDSTALL  0x0       
 #define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
-#define        nSERVICED_RXPKTRDY  0x0       
 #define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
-#define        nSERVICED_SETUPEND  0x0       
 #define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
-#define                nFLUSHFIFO  0x0       
 #define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
-#define         nSTALL_RECEIVED_H  0x0       
 #define                SETUPPKT_H  0x8        /* send Setup token host mode */
-#define               nSETUPPKT_H  0x0       
 #define                   ERROR_H  0x10       /* timeout error indicator host mode */
-#define                  nERROR_H  0x0       
 #define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
-#define                 nREQPKT_H  0x0       
 #define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
-#define              nSTATUSPKT_H  0x0       
 #define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
-#define            nNAK_TIMEOUT_H  0x0       
 
 /* Bit masks for USB_COUNT0 */
 
@@ -1784,37 +1502,21 @@
 /* Bit masks for USB_TXCSR */
 
 #define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
-#define               nTXPKTRDY_T  0x0       
 #define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
-#define         nFIFO_NOT_EMPTY_T  0x0       
 #define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
-#define               nUNDERRUN_T  0x0       
 #define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
-#define              nFLUSHFIFO_T  0x0       
 #define              STALL_SEND_T  0x10       /* issue a Stall handshake */
-#define             nSTALL_SEND_T  0x0       
 #define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
-#define             nSTALL_SENT_T  0x0       
 #define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_T  0x0       
 #define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
-#define               nINCOMPTX_T  0x0       
 #define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_T  0x0       
 #define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
-#define       nFORCE_DATATOGGLE_T  0x0       
 #define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_T  0x0       
 #define                     ISO_T  0x4000     /* enable Isochronous transfers */
-#define                    nISO_T  0x0       
 #define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
-#define                nAUTOSET_T  0x0       
 #define                  ERROR_TH  0x4        /* error condition host mode */
-#define                 nERROR_TH  0x0       
 #define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_TH  0x0       
 #define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
-#define           nNAK_TIMEOUT_TH  0x0       
 
 /* Bit masks for USB_TXCOUNT */
 
@@ -1823,45 +1525,25 @@
 /* Bit masks for USB_RXCSR */
 
 #define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
-#define               nRXPKTRDY_R  0x0       
 #define               FIFO_FULL_R  0x2        /* FIFO not empty */
-#define              nFIFO_FULL_R  0x0       
 #define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
-#define                nOVERRUN_R  0x0       
 #define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
-#define              nDATAERROR_R  0x0       
 #define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
-#define              nFLUSHFIFO_R  0x0       
 #define              STALL_SEND_R  0x20       /* issue a Stall handshake */
-#define             nSTALL_SEND_R  0x0       
 #define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
-#define             nSTALL_SENT_R  0x0       
 #define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_R  0x0       
 #define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
-#define               nINCOMPRX_R  0x0       
 #define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_R  0x0       
 #define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
-#define                nDISNYET_R  0x0       
 #define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_R  0x0       
 #define                     ISO_R  0x4000     /* enable Isochronous transfers */
-#define                    nISO_R  0x0       
 #define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
-#define              nAUTOCLEAR_R  0x0       
 #define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
-#define                 nERROR_RH  0x0       
 #define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
-#define                nREQPKT_RH  0x0       
 #define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_RH  0x0       
 #define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
-#define              nINCOMPRX_RH  0x0       
 #define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
-#define            nDMAREQMODE_RH  0x0       
 #define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
-#define               nAUTOREQ_RH  0x0       
 
 /* Bit masks for USB_RXCOUNT */
 
@@ -1888,35 +1570,22 @@
 /* Bit masks for USB_DMA_INTERRUPT */
 
 #define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
-#define                 nDMA0_INT  0x0       
 #define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
-#define                 nDMA1_INT  0x0       
 #define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
-#define                 nDMA2_INT  0x0       
 #define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
-#define                 nDMA3_INT  0x0       
 #define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
-#define                 nDMA4_INT  0x0       
 #define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
-#define                 nDMA5_INT  0x0       
 #define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
-#define                 nDMA6_INT  0x0       
 #define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
-#define                 nDMA7_INT  0x0       
 
 /* Bit masks for USB_DMAxCONTROL */
 
 #define                   DMA_ENA  0x1        /* DMA enable */
-#define                  nDMA_ENA  0x0       
 #define                 DIRECTION  0x2        /* direction of DMA transfer */
-#define                nDIRECTION  0x0       
 #define                      MODE  0x4        /* DMA Bus error */
-#define                     nMODE  0x0       
 #define                   INT_ENA  0x8        /* Interrupt enable */
-#define                  nINT_ENA  0x0       
 #define                     EPNUM  0xf0       /* EP number */
 #define                  BUSERROR  0x100      /* DMA Bus error */
-#define                 nBUSERROR  0x0       
 
 /* Bit masks for USB_DMAxADDRHIGH */
 
@@ -1937,26 +1606,16 @@
 /* Bit masks for HMDMAx_CONTROL */
 
 #define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
-#define                  nHMDMAEN  0x0       
 #define                       REP  0x2        /* Handshake MDMA Request Polarity */
-#define                      nREP  0x0       
 #define                       UTE  0x8        /* Urgency Threshold Enable */
-#define                      nUTE  0x0       
 #define                       OIE  0x10       /* Overflow Interrupt Enable */
-#define                      nOIE  0x0       
 #define                      BDIE  0x20       /* Block Done Interrupt Enable */
-#define                     nBDIE  0x0       
 #define                      MBDI  0x40       /* Mask Block Done Interrupt */
-#define                     nMBDI  0x0       
 #define                       DRQ  0x300      /* Handshake MDMA Request Type */
 #define                       RBC  0x1000     /* Force Reload of BCOUNT */
-#define                      nRBC  0x0       
 #define                        PS  0x2000     /* Pin Status */
-#define                       nPS  0x0       
 #define                        OI  0x4000     /* Overflow Interrupt Generated */
-#define                       nOI  0x0       
 #define                       BDI  0x8000     /* Block Done Interrupt Generated */
-#define                      nBDI  0x0       
 
 /* ******************************************* */
 /*     MULTI BIT MACRO ENUMERATIONS            */
diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/include/asm-blackfin/mach-bf548/defBF549.h
index b1cc1c0..c2f4734 100644
--- a/include/asm-blackfin/mach-bf548/defBF549.h
+++ b/include/asm-blackfin/mach-bf548/defBF549.h
@@ -1070,21 +1070,13 @@
 /* Bit masks for PIXC_CTL */
 
 #define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
-#define                  nPIXC_EN  0x0       
 #define                  OVR_A_EN  0x2        /* Overlay A Enable */
-#define                 nOVR_A_EN  0x0       
 #define                  OVR_B_EN  0x4        /* Overlay B Enable */
-#define                 nOVR_B_EN  0x0       
 #define                  IMG_FORM  0x8        /* Image Data Format */
-#define                 nIMG_FORM  0x0       
 #define                  OVR_FORM  0x10       /* Overlay Data Format */
-#define                 nOVR_FORM  0x0       
 #define                  OUT_FORM  0x20       /* Output Data Format */
-#define                 nOUT_FORM  0x0       
 #define                   UDS_MOD  0x40       /* Resampling Mode */
-#define                  nUDS_MOD  0x0       
 #define                     TC_EN  0x80       /* Transparent Color Enable */
-#define                    nTC_EN  0x0       
 #define                  IMG_STAT  0x300      /* Image FIFO Status */
 #define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
 #define                    WM_LVL  0x3000     /* FIFO Watermark Level */
@@ -1132,13 +1124,9 @@
 /* Bit masks for PIXC_INTRSTAT */
 
 #define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
-#define               nOVR_INT_EN  0x0       
 #define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
-#define               nFRM_INT_EN  0x0       
 #define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
-#define             nOVR_INT_STAT  0x0       
 #define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
-#define             nFRM_INT_STAT  0x0       
 
 /* Bit masks for PIXC_RYCON */
 
@@ -1146,7 +1134,6 @@
 #define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
 #define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
 #define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nRY_MULT4  0x0       
 
 /* Bit masks for PIXC_GUCON */
 
@@ -1154,7 +1141,6 @@
 #define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
 #define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
 #define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nGU_MULT4  0x0       
 
 /* Bit masks for PIXC_BVCON */
 
@@ -1162,7 +1148,6 @@
 #define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
 #define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
 #define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nBV_MULT4  0x0       
 
 /* Bit masks for PIXC_CCBIAS */
 
@@ -1179,48 +1164,28 @@
 /* Bit masks for HOST_CONTROL */
 
 #define                   HOST_EN  0x1        /* Host Enable */
-#define                  nHOST_EN  0x0       
 #define                  HOST_END  0x2        /* Host Endianess */
-#define                 nHOST_END  0x0       
 #define                 DATA_SIZE  0x4        /* Data Size */
-#define                nDATA_SIZE  0x0       
 #define                  HOST_RST  0x8        /* Host Reset */
-#define                 nHOST_RST  0x0       
 #define                  HRDY_OVR  0x20       /* Host Ready Override */
-#define                 nHRDY_OVR  0x0       
 #define                  INT_MODE  0x40       /* Interrupt Mode */
-#define                 nINT_MODE  0x0       
 #define                     BT_EN  0x80       /* Bus Timeout Enable */
-#define                    nBT_EN  0x0       
 #define                       EHW  0x100      /* Enable Host Write */
-#define                      nEHW  0x0       
 #define                       EHR  0x200      /* Enable Host Read */
-#define                      nEHR  0x0       
 #define                       BDR  0x400      /* Burst DMA Requests */
-#define                      nBDR  0x0       
 
 /* Bit masks for HOST_STATUS */
 
 #define                     READY  0x1        /* DMA Ready */
-#define                    nREADY  0x0       
 #define                  FIFOFULL  0x2        /* FIFO Full */
-#define                 nFIFOFULL  0x0       
 #define                 FIFOEMPTY  0x4        /* FIFO Empty */
-#define                nFIFOEMPTY  0x0       
-#define                  COMPLETE  0x8        /* DMA Complete */
-#define                 nCOMPLETE  0x0       
+#define              DMA_COMPLETE  0x8        /* DMA Complete */
 #define                      HSHK  0x10       /* Host Handshake */
-#define                     nHSHK  0x0       
 #define                   TIMEOUT  0x20       /* Host Timeout */
-#define                  nTIMEOUT  0x0       
 #define                      HIRQ  0x40       /* Host Interrupt Request */
-#define                     nHIRQ  0x0       
 #define                ALLOW_CNFG  0x80       /* Allow New Configuration */
-#define               nALLOW_CNFG  0x0       
 #define                   DMA_DIR  0x100      /* DMA Direction */
-#define                  nDMA_DIR  0x0       
 #define                       BTE  0x200      /* Bus Timeout Enabled */
-#define                      nBTE  0x0       
 
 /* Bit masks for HOST_TIMEOUT */
 
@@ -1229,71 +1194,41 @@
 /* Bit masks for MXVR_CONFIG */
 
 #define                    MXVREN  0x1        /* MXVR Enable */
-#define                   nMXVREN  0x0       
 #define                      MMSM  0x2        /* MXVR Master/Slave Mode Select */
-#define                     nMMSM  0x0       
 #define                    ACTIVE  0x4        /* Active Mode */
-#define                   nACTIVE  0x0       
 #define                    SDELAY  0x8        /* Synchronous Data Delay */
-#define                   nSDELAY  0x0       
 #define                   NCMRXEN  0x10       /* Normal Control Message Receive Enable */
-#define                  nNCMRXEN  0x0       
 #define                   RWRRXEN  0x20       /* Remote Write Receive Enable */
-#define                  nRWRRXEN  0x0       
 #define                     MTXEN  0x40       /* MXVR Transmit Data Enable */
-#define                    nMTXEN  0x0       
 #define                    MTXONB  0x80       /* MXVR Phy Transmitter On */
-#define                   nMTXONB  0x0       
 #define                   EPARITY  0x100      /* Even Parity Select */
-#define                  nEPARITY  0x0       
 #define                       MSB  0x1e00     /* Master Synchronous Boundary */
 #define                    APRXEN  0x2000     /* Asynchronous Packet Receive Enable */
-#define                   nAPRXEN  0x0       
 #define                    WAKEUP  0x4000     /* Wake-Up */
-#define                   nWAKEUP  0x0       
 #define                     LMECH  0x8000     /* Lock Mechanism Select */
-#define                    nLMECH  0x0       
 
 /* Bit masks for MXVR_STATE_0 */
 
 #define                      NACT  0x1        /* Network Activity */
-#define                     nNACT  0x0       
 #define                    SBLOCK  0x2        /* Super Block Lock */
-#define                   nSBLOCK  0x0       
 #define                   FMPLLST  0xc        /* Frequency Multiply PLL SM State */
 #define                  CDRPLLST  0xe0       /* Clock/Data Recovery PLL SM State */
 #define                     APBSY  0x100      /* Asynchronous Packet Transmit Buffer Busy */
-#define                    nAPBSY  0x0       
 #define                     APARB  0x200      /* Asynchronous Packet Arbitrating */
-#define                    nAPARB  0x0       
 #define                      APTX  0x400      /* Asynchronous Packet Transmitting */
-#define                     nAPTX  0x0       
 #define                      APRX  0x800      /* Receiving Asynchronous Packet */
-#define                     nAPRX  0x0       
 #define                     CMBSY  0x1000     /* Control Message Transmit Buffer Busy */
-#define                    nCMBSY  0x0       
 #define                     CMARB  0x2000     /* Control Message Arbitrating */
-#define                    nCMARB  0x0       
 #define                      CMTX  0x4000     /* Control Message Transmitting */
-#define                     nCMTX  0x0       
 #define                      CMRX  0x8000     /* Receiving Control Message */
-#define                     nCMRX  0x0       
 #define                    MRXONB  0x10000    /* MRXONB Pin State */
-#define                   nMRXONB  0x0       
 #define                     RGSIP  0x20000    /* Remote Get Source In Progress */
-#define                    nRGSIP  0x0       
 #define                     DALIP  0x40000    /* Resource Deallocate In Progress */
-#define                    nDALIP  0x0       
 #define                      ALIP  0x80000    /* Resource Allocate In Progress */
-#define                     nALIP  0x0       
 #define                     RRDIP  0x100000   /* Remote Read In Progress */
-#define                    nRRDIP  0x0       
 #define                     RWRIP  0x200000   /* Remote Write In Progress */
-#define                    nRWRIP  0x0       
 #define                     FLOCK  0x400000   /* Frame Lock */
-#define                    nFLOCK  0x0       
 #define                     BLOCK  0x800000   /* Block Lock */
-#define                    nBLOCK  0x0       
 #define                       RSB  0xf000000  /* Received Synchronous Boundary */
 #define                   DERRNUM  0xf0000000 /* DMA Error Channel Number */
 
@@ -1302,535 +1237,343 @@
 #define                   SRXNUMB  0xf        /* Synchronous Receive FIFO Number of Bytes */
 #define                   STXNUMB  0xf0       /* Synchronous Transmit FIFO Number of Bytes */
 #define                    APCONT  0x100      /* Asynchronous Packet Continuation */
-#define                   nAPCONT  0x0       
 #define                  OBERRNUM  0xe00      /* DMA Out of Bounds Error Channel Number */
 #define                DMAACTIVE0  0x10000    /* DMA0 Active */
-#define               nDMAACTIVE0  0x0       
 #define                DMAACTIVE1  0x20000    /* DMA1 Active */
-#define               nDMAACTIVE1  0x0       
 #define                DMAACTIVE2  0x40000    /* DMA2 Active */
-#define               nDMAACTIVE2  0x0       
 #define                DMAACTIVE3  0x80000    /* DMA3 Active */
-#define               nDMAACTIVE3  0x0       
 #define                DMAACTIVE4  0x100000   /* DMA4 Active */
-#define               nDMAACTIVE4  0x0       
 #define                DMAACTIVE5  0x200000   /* DMA5 Active */
-#define               nDMAACTIVE5  0x0       
 #define                DMAACTIVE6  0x400000   /* DMA6 Active */
-#define               nDMAACTIVE6  0x0       
 #define                DMAACTIVE7  0x800000   /* DMA7 Active */
-#define               nDMAACTIVE7  0x0       
 #define                  DMAPMEN0  0x1000000  /* DMA0 Pattern Matching Enabled */
-#define                 nDMAPMEN0  0x0       
 #define                  DMAPMEN1  0x2000000  /* DMA1 Pattern Matching Enabled */
-#define                 nDMAPMEN1  0x0       
 #define                  DMAPMEN2  0x4000000  /* DMA2 Pattern Matching Enabled */
-#define                 nDMAPMEN2  0x0       
 #define                  DMAPMEN3  0x8000000  /* DMA3 Pattern Matching Enabled */
-#define                 nDMAPMEN3  0x0       
 #define                  DMAPMEN4  0x10000000 /* DMA4 Pattern Matching Enabled */
-#define                 nDMAPMEN4  0x0       
 #define                  DMAPMEN5  0x20000000 /* DMA5 Pattern Matching Enabled */
-#define                 nDMAPMEN5  0x0       
 #define                  DMAPMEN6  0x40000000 /* DMA6 Pattern Matching Enabled */
-#define                 nDMAPMEN6  0x0       
 #define                  DMAPMEN7  0x80000000 /* DMA7 Pattern Matching Enabled */
-#define                 nDMAPMEN7  0x0       
 
 /* Bit masks for MXVR_INT_STAT_0 */
 
 #define                      NI2A  0x1        /* Network Inactive to Active */
-#define                     nNI2A  0x0       
 #define                      NA2I  0x2        /* Network Active to Inactive */
-#define                     nNA2I  0x0       
 #define                     SBU2L  0x4        /* Super Block Unlock to Lock */
-#define                    nSBU2L  0x0       
 #define                     SBL2U  0x8        /* Super Block Lock to Unlock */
-#define                    nSBL2U  0x0       
 #define                       PRU  0x10       /* Position Register Updated */
-#define                      nPRU  0x0       
 #define                      MPRU  0x20       /* Maximum Position Register Updated */
-#define                     nMPRU  0x0       
 #define                       DRU  0x40       /* Delay Register Updated */
-#define                      nDRU  0x0       
 #define                      MDRU  0x80       /* Maximum Delay Register Updated */
-#define                     nMDRU  0x0       
 #define                       SBU  0x100      /* Synchronous Boundary Updated */
-#define                      nSBU  0x0       
 #define                       ATU  0x200      /* Allocation Table Updated */
-#define                      nATU  0x0       
 #define                      FCZ0  0x400      /* Frame Counter 0 Zero */
-#define                     nFCZ0  0x0       
 #define                      FCZ1  0x800      /* Frame Counter 1 Zero */
-#define                     nFCZ1  0x0       
 #define                      PERR  0x1000     /* Parity Error */
-#define                     nPERR  0x0       
 #define                      MH2L  0x2000     /* MRXONB High to Low */
-#define                     nMH2L  0x0       
 #define                      ML2H  0x4000     /* MRXONB Low to High */
-#define                     nML2H  0x0       
 #define                       WUP  0x8000     /* Wake-Up Preamble Received */
-#define                      nWUP  0x0       
 #define                      FU2L  0x10000    /* Frame Unlock to Lock */
-#define                     nFU2L  0x0       
 #define                      FL2U  0x20000    /* Frame Lock to Unlock */
-#define                     nFL2U  0x0       
 #define                      BU2L  0x40000    /* Block Unlock to Lock */
-#define                     nBU2L  0x0       
 #define                      BL2U  0x80000    /* Block Lock to Unlock */
-#define                     nBL2U  0x0       
 #define                     OBERR  0x100000   /* DMA Out of Bounds Error */
-#define                    nOBERR  0x0       
 #define                       PFL  0x200000   /* PLL Frequency Locked */
-#define                      nPFL  0x0       
 #define                       SCZ  0x400000   /* System Clock Counter Zero */
-#define                      nSCZ  0x0       
 #define                      FERR  0x800000   /* FIFO Error */
-#define                     nFERR  0x0       
 #define                       CMR  0x1000000  /* Control Message Received */
-#define                      nCMR  0x0       
 #define                     CMROF  0x2000000  /* Control Message Receive Buffer Overflow */
-#define                    nCMROF  0x0       
 #define                      CMTS  0x4000000  /* Control Message Transmit Buffer Successfully Sent */
-#define                     nCMTS  0x0       
 #define                      CMTC  0x8000000  /* Control Message Transmit Buffer Successfully Cancelled */
-#define                     nCMTC  0x0       
 #define                      RWRC  0x10000000 /* Remote Write Control Message Completed */
-#define                     nRWRC  0x0       
 #define                       BCZ  0x20000000 /* Block Counter Zero */
-#define                      nBCZ  0x0       
 #define                     BMERR  0x40000000 /* Biphase Mark Coding Error */
-#define                    nBMERR  0x0       
 #define                      DERR  0x80000000 /* DMA Error */
-#define                     nDERR  0x0       
 
 /* Bit masks for MXVR_INT_STAT_1 */
 
 #define                    HDONE0  0x1        /* DMA0 Half Done */
-#define                   nHDONE0  0x0       
 #define                     DONE0  0x2        /* DMA0 Done */
-#define                    nDONE0  0x0       
 #define                       APR  0x4        /* Asynchronous Packet Received */
-#define                      nAPR  0x0       
 #define                     APROF  0x8        /* Asynchronous Packet Receive Buffer Overflow */
-#define                    nAPROF  0x0       
 #define                    HDONE1  0x10       /* DMA1 Half Done */
-#define                   nHDONE1  0x0       
 #define                     DONE1  0x20       /* DMA1 Done */
-#define                    nDONE1  0x0       
 #define                      APTS  0x40       /* Asynchronous Packet Transmit Buffer Successfully Sent */
-#define                     nAPTS  0x0       
 #define                      APTC  0x80       /* Asynchronous Packet Transmit Buffer Successfully Cancelled */
-#define                     nAPTC  0x0       
 #define                    HDONE2  0x100      /* DMA2 Half Done */
-#define                   nHDONE2  0x0       
 #define                     DONE2  0x200      /* DMA2 Done */
-#define                    nDONE2  0x0       
 #define                     APRCE  0x400      /* Asynchronous Packet Receive CRC Error */
-#define                    nAPRCE  0x0       
 #define                     APRPE  0x800      /* Asynchronous Packet Receive Packet Error */
-#define                    nAPRPE  0x0       
 #define                    HDONE3  0x1000     /* DMA3 Half Done */
-#define                   nHDONE3  0x0       
 #define                     DONE3  0x2000     /* DMA3 Done */
-#define                    nDONE3  0x0       
 #define                    HDONE4  0x10000    /* DMA4 Half Done */
-#define                   nHDONE4  0x0       
 #define                     DONE4  0x20000    /* DMA4 Done */
-#define                    nDONE4  0x0       
 #define                    HDONE5  0x100000   /* DMA5 Half Done */
-#define                   nHDONE5  0x0       
 #define                     DONE5  0x200000   /* DMA5 Done */
-#define                    nDONE5  0x0       
 #define                    HDONE6  0x1000000  /* DMA6 Half Done */
-#define                   nHDONE6  0x0       
 #define                     DONE6  0x2000000  /* DMA6 Done */
-#define                    nDONE6  0x0       
 #define                    HDONE7  0x10000000 /* DMA7 Half Done */
-#define                   nHDONE7  0x0       
 #define                     DONE7  0x20000000 /* DMA7 Done */
-#define                    nDONE7  0x0       
 
 /* Bit masks for MXVR_INT_EN_0 */
 
 #define                    NI2AEN  0x1        /* Network Inactive to Active Interrupt Enable */
-#define                   nNI2AEN  0x0       
 #define                    NA2IEN  0x2        /* Network Active to Inactive Interrupt Enable */
-#define                   nNA2IEN  0x0       
 #define                   SBU2LEN  0x4        /* Super Block Unlock to Lock Interrupt Enable */
-#define                  nSBU2LEN  0x0       
 #define                   SBL2UEN  0x8        /* Super Block Lock to Unlock Interrupt Enable */
-#define                  nSBL2UEN  0x0       
 #define                     PRUEN  0x10       /* Position Register Updated Interrupt Enable */
-#define                    nPRUEN  0x0       
 #define                    MPRUEN  0x20       /* Maximum Position Register Updated Interrupt Enable */
-#define                   nMPRUEN  0x0       
 #define                     DRUEN  0x40       /* Delay Register Updated Interrupt Enable */
-#define                    nDRUEN  0x0       
 #define                    MDRUEN  0x80       /* Maximum Delay Register Updated Interrupt Enable */
-#define                   nMDRUEN  0x0       
 #define                     SBUEN  0x100      /* Synchronous Boundary Updated Interrupt Enable */
-#define                    nSBUEN  0x0       
 #define                     ATUEN  0x200      /* Allocation Table Updated Interrupt Enable */
-#define                    nATUEN  0x0       
 #define                    FCZ0EN  0x400      /* Frame Counter 0 Zero Interrupt Enable */
-#define                   nFCZ0EN  0x0       
 #define                    FCZ1EN  0x800      /* Frame Counter 1 Zero Interrupt Enable */
-#define                   nFCZ1EN  0x0       
 #define                    PERREN  0x1000     /* Parity Error Interrupt Enable */
-#define                   nPERREN  0x0       
 #define                    MH2LEN  0x2000     /* MRXONB High to Low Interrupt Enable */
-#define                   nMH2LEN  0x0       
 #define                    ML2HEN  0x4000     /* MRXONB Low to High Interrupt Enable */
-#define                   nML2HEN  0x0       
 #define                     WUPEN  0x8000     /* Wake-Up Preamble Received Interrupt Enable */
-#define                    nWUPEN  0x0       
 #define                    FU2LEN  0x10000    /* Frame Unlock to Lock Interrupt Enable */
-#define                   nFU2LEN  0x0       
 #define                    FL2UEN  0x20000    /* Frame Lock to Unlock Interrupt Enable */
-#define                   nFL2UEN  0x0       
 #define                    BU2LEN  0x40000    /* Block Unlock to Lock Interrupt Enable */
-#define                   nBU2LEN  0x0       
 #define                    BL2UEN  0x80000    /* Block Lock to Unlock Interrupt Enable */
-#define                   nBL2UEN  0x0       
 #define                   OBERREN  0x100000   /* DMA Out of Bounds Error Interrupt Enable */
-#define                  nOBERREN  0x0       
 #define                     PFLEN  0x200000   /* PLL Frequency Locked Interrupt Enable */
-#define                    nPFLEN  0x0       
 #define                     SCZEN  0x400000   /* System Clock Counter Zero Interrupt Enable */
-#define                    nSCZEN  0x0       
 #define                    FERREN  0x800000   /* FIFO Error Interrupt Enable */
-#define                   nFERREN  0x0       
 #define                     CMREN  0x1000000  /* Control Message Received Interrupt Enable */
-#define                    nCMREN  0x0       
 #define                   CMROFEN  0x2000000  /* Control Message Receive Buffer Overflow Interrupt Enable */
-#define                  nCMROFEN  0x0       
 #define                    CMTSEN  0x4000000  /* Control Message Transmit Buffer Successfully Sent Interrupt Enable */
-#define                   nCMTSEN  0x0       
 #define                    CMTCEN  0x8000000  /* Control Message Transmit Buffer Successfully Cancelled Interrupt Enable */
-#define                   nCMTCEN  0x0       
 #define                    RWRCEN  0x10000000 /* Remote Write Control Message Completed Interrupt Enable */
-#define                   nRWRCEN  0x0       
 #define                     BCZEN  0x20000000 /* Block Counter Zero Interrupt Enable */
-#define                    nBCZEN  0x0       
 #define                   BMERREN  0x40000000 /* Biphase Mark Coding Error Interrupt Enable */
-#define                  nBMERREN  0x0       
 #define                    DERREN  0x80000000 /* DMA Error Interrupt Enable */
-#define                   nDERREN  0x0       
 
 /* Bit masks for MXVR_INT_EN_1 */
 
 #define                  HDONEEN0  0x1        /* DMA0 Half Done Interrupt Enable */
-#define                 nHDONEEN0  0x0       
 #define                   DONEEN0  0x2        /* DMA0 Done Interrupt Enable */
-#define                  nDONEEN0  0x0       
 #define                     APREN  0x4        /* Asynchronous Packet Received Interrupt Enable */
-#define                    nAPREN  0x0       
 #define                   APROFEN  0x8        /* Asynchronous Packet Receive Buffer Overflow Interrupt Enable */
-#define                  nAPROFEN  0x0       
 #define                  HDONEEN1  0x10       /* DMA1 Half Done Interrupt Enable */
-#define                 nHDONEEN1  0x0       
 #define                   DONEEN1  0x20       /* DMA1 Done Interrupt Enable */
-#define                  nDONEEN1  0x0       
 #define                    APTSEN  0x40       /* Asynchronous Packet Transmit Buffer Successfully Sent Interrupt Enable */
-#define                   nAPTSEN  0x0       
 #define                    APTCEN  0x80       /* Asynchronous Packet Transmit Buffer Successfully Cancelled Interrupt Enable */
-#define                   nAPTCEN  0x0       
 #define                  HDONEEN2  0x100      /* DMA2 Half Done Interrupt Enable */
-#define                 nHDONEEN2  0x0       
 #define                   DONEEN2  0x200      /* DMA2 Done Interrupt Enable */
-#define                  nDONEEN2  0x0       
 #define                   APRCEEN  0x400      /* Asynchronous Packet Receive CRC Error Interrupt Enable */
-#define                  nAPRCEEN  0x0       
 #define                   APRPEEN  0x800      /* Asynchronous Packet Receive Packet Error Interrupt Enable */
-#define                  nAPRPEEN  0x0       
 #define                  HDONEEN3  0x1000     /* DMA3 Half Done Interrupt Enable */
-#define                 nHDONEEN3  0x0       
 #define                   DONEEN3  0x2000     /* DMA3 Done Interrupt Enable */
-#define                  nDONEEN3  0x0       
 #define                  HDONEEN4  0x10000    /* DMA4 Half Done Interrupt Enable */
-#define                 nHDONEEN4  0x0       
 #define                   DONEEN4  0x20000    /* DMA4 Done Interrupt Enable */
-#define                  nDONEEN4  0x0       
 #define                  HDONEEN5  0x100000   /* DMA5 Half Done Interrupt Enable */
-#define                 nHDONEEN5  0x0       
 #define                   DONEEN5  0x200000   /* DMA5 Done Interrupt Enable */
-#define                  nDONEEN5  0x0       
 #define                  HDONEEN6  0x1000000  /* DMA6 Half Done Interrupt Enable */
-#define                 nHDONEEN6  0x0       
 #define                   DONEEN6  0x2000000  /* DMA6 Done Interrupt Enable */
-#define                  nDONEEN6  0x0       
 #define                  HDONEEN7  0x10000000 /* DMA7 Half Done Interrupt Enable */
-#define                 nHDONEEN7  0x0       
 #define                   DONEEN7  0x20000000 /* DMA7 Done Interrupt Enable */
-#define                  nDONEEN7  0x0       
 
 /* Bit masks for MXVR_POSITION */
 
 #define                  POSITION  0x3f       /* Node Position */
 #define                    PVALID  0x8000     /* Node Position Valid */
-#define                   nPVALID  0x0       
 
 /* Bit masks for MXVR_MAX_POSITION */
 
 #define                 MPOSITION  0x3f       /* Maximum Node Position */
 #define                   MPVALID  0x8000     /* Maximum Node Position Valid */
-#define                  nMPVALID  0x0       
 
 /* Bit masks for MXVR_DELAY */
 
 #define                     DELAY  0x3f       /* Node Frame Delay */
 #define                    DVALID  0x8000     /* Node Frame Delay Valid */
-#define                   nDVALID  0x0       
 
 /* Bit masks for MXVR_MAX_DELAY */
 
 #define                    MDELAY  0x3f       /* Maximum Node Frame Delay */
 #define                   MDVALID  0x8000     /* Maximum Node Frame Delay Valid */
-#define                  nMDVALID  0x0       
 
 /* Bit masks for MXVR_LADDR */
 
 #define                     LADDR  0xffff     /* Logical Address */
 #define                    LVALID  0x80000000 /* Logical Address Valid */
-#define                   nLVALID  0x0       
 
 /* Bit masks for MXVR_GADDR */
 
 #define                    GADDRL  0xff       /* Group Address Lower Byte */
 #define                    GVALID  0x8000     /* Group Address Valid */
-#define                   nGVALID  0x0       
 
 /* Bit masks for MXVR_AADDR */
 
 #define                     AADDR  0xffff     /* Alternate Address */
 #define                    AVALID  0x80000000 /* Alternate Address Valid */
-#define                   nAVALID  0x0       
 
 /* Bit masks for MXVR_ALLOC_0 */
 
 #define                       CL0  0x7f       /* Channel 0 Connection Label */
 #define                      CIU0  0x80       /* Channel 0 In Use */
-#define                     nCIU0  0x0       
 #define                       CL1  0x7f00     /* Channel 0 Connection Label */
 #define                      CIU1  0x8000     /* Channel 0 In Use */
-#define                     nCIU1  0x0       
 #define                       CL2  0x7f0000   /* Channel 0 Connection Label */
 #define                      CIU2  0x800000   /* Channel 0 In Use */
-#define                     nCIU2  0x0       
 #define                       CL3  0x7f000000 /* Channel 0 Connection Label */
 #define                      CIU3  0x80000000 /* Channel 0 In Use */
-#define                     nCIU3  0x0       
 
 /* Bit masks for MXVR_ALLOC_1 */
 
 #define                       CL4  0x7f       /* Channel 4 Connection Label */
 #define                      CIU4  0x80       /* Channel 4 In Use */
-#define                     nCIU4  0x0       
 #define                       CL5  0x7f00     /* Channel 5 Connection Label */
 #define                      CIU5  0x8000     /* Channel 5 In Use */
-#define                     nCIU5  0x0       
 #define                       CL6  0x7f0000   /* Channel 6 Connection Label */
 #define                      CIU6  0x800000   /* Channel 6 In Use */
-#define                     nCIU6  0x0       
 #define                       CL7  0x7f000000 /* Channel 7 Connection Label */
 #define                      CIU7  0x80000000 /* Channel 7 In Use */
-#define                     nCIU7  0x0       
 
 /* Bit masks for MXVR_ALLOC_2 */
 
 #define                       CL8  0x7f       /* Channel 8 Connection Label */
 #define                      CIU8  0x80       /* Channel 8 In Use */
-#define                     nCIU8  0x0       
 #define                       CL9  0x7f00     /* Channel 9 Connection Label */
 #define                      CIU9  0x8000     /* Channel 9 In Use */
-#define                     nCIU9  0x0       
 #define                      CL10  0x7f0000   /* Channel 10 Connection Label */
 #define                     CIU10  0x800000   /* Channel 10 In Use */
-#define                    nCIU10  0x0       
 #define                      CL11  0x7f000000 /* Channel 11 Connection Label */
 #define                     CIU11  0x80000000 /* Channel 11 In Use */
-#define                    nCIU11  0x0       
 
 /* Bit masks for MXVR_ALLOC_3 */
 
 #define                      CL12  0x7f       /* Channel 12 Connection Label */
 #define                     CIU12  0x80       /* Channel 12 In Use */
-#define                    nCIU12  0x0       
 #define                      CL13  0x7f00     /* Channel 13 Connection Label */
 #define                     CIU13  0x8000     /* Channel 13 In Use */
-#define                    nCIU13  0x0       
 #define                      CL14  0x7f0000   /* Channel 14 Connection Label */
 #define                     CIU14  0x800000   /* Channel 14 In Use */
-#define                    nCIU14  0x0       
 #define                      CL15  0x7f000000 /* Channel 15 Connection Label */
 #define                     CIU15  0x80000000 /* Channel 15 In Use */
-#define                    nCIU15  0x0       
 
 /* Bit masks for MXVR_ALLOC_4 */
 
 #define                      CL16  0x7f       /* Channel 16 Connection Label */
 #define                     CIU16  0x80       /* Channel 16 In Use */
-#define                    nCIU16  0x0       
 #define                      CL17  0x7f00     /* Channel 17 Connection Label */
 #define                     CIU17  0x8000     /* Channel 17 In Use */
-#define                    nCIU17  0x0       
 #define                      CL18  0x7f0000   /* Channel 18 Connection Label */
 #define                     CIU18  0x800000   /* Channel 18 In Use */
-#define                    nCIU18  0x0       
 #define                      CL19  0x7f000000 /* Channel 19 Connection Label */
 #define                     CIU19  0x80000000 /* Channel 19 In Use */
-#define                    nCIU19  0x0       
 
 /* Bit masks for MXVR_ALLOC_5 */
 
 #define                      CL20  0x7f       /* Channel 20 Connection Label */
 #define                     CIU20  0x80       /* Channel 20 In Use */
-#define                    nCIU20  0x0       
 #define                      CL21  0x7f00     /* Channel 21 Connection Label */
 #define                     CIU21  0x8000     /* Channel 21 In Use */
-#define                    nCIU21  0x0       
 #define                      CL22  0x7f0000   /* Channel 22 Connection Label */
 #define                     CIU22  0x800000   /* Channel 22 In Use */
-#define                    nCIU22  0x0       
 #define                      CL23  0x7f000000 /* Channel 23 Connection Label */
 #define                     CIU23  0x80000000 /* Channel 23 In Use */
-#define                    nCIU23  0x0       
 
 /* Bit masks for MXVR_ALLOC_6 */
 
 #define                      CL24  0x7f       /* Channel 24 Connection Label */
 #define                     CIU24  0x80       /* Channel 24 In Use */
-#define                    nCIU24  0x0       
 #define                      CL25  0x7f00     /* Channel 25 Connection Label */
 #define                     CIU25  0x8000     /* Channel 25 In Use */
-#define                    nCIU25  0x0       
 #define                      CL26  0x7f0000   /* Channel 26 Connection Label */
 #define                     CIU26  0x800000   /* Channel 26 In Use */
-#define                    nCIU26  0x0       
 #define                      CL27  0x7f000000 /* Channel 27 Connection Label */
 #define                     CIU27  0x80000000 /* Channel 27 In Use */
-#define                    nCIU27  0x0       
 
 /* Bit masks for MXVR_ALLOC_7 */
 
 #define                      CL28  0x7f       /* Channel 28 Connection Label */
 #define                     CIU28  0x80       /* Channel 28 In Use */
-#define                    nCIU28  0x0       
 #define                      CL29  0x7f00     /* Channel 29 Connection Label */
 #define                     CIU29  0x8000     /* Channel 29 In Use */
-#define                    nCIU29  0x0       
 #define                      CL30  0x7f0000   /* Channel 30 Connection Label */
 #define                     CIU30  0x800000   /* Channel 30 In Use */
-#define                    nCIU30  0x0       
 #define                      CL31  0x7f000000 /* Channel 31 Connection Label */
 #define                     CIU31  0x80000000 /* Channel 31 In Use */
-#define                    nCIU31  0x0       
 
 /* Bit masks for MXVR_ALLOC_8 */
 
 #define                      CL32  0x7f       /* Channel 32 Connection Label */
 #define                     CIU32  0x80       /* Channel 32 In Use */
-#define                    nCIU32  0x0       
 #define                      CL33  0x7f00     /* Channel 33 Connection Label */
 #define                     CIU33  0x8000     /* Channel 33 In Use */
-#define                    nCIU33  0x0       
 #define                      CL34  0x7f0000   /* Channel 34 Connection Label */
 #define                     CIU34  0x800000   /* Channel 34 In Use */
-#define                    nCIU34  0x0       
 #define                      CL35  0x7f000000 /* Channel 35 Connection Label */
 #define                     CIU35  0x80000000 /* Channel 35 In Use */
-#define                    nCIU35  0x0       
 
 /* Bit masks for MXVR_ALLOC_9 */
 
 #define                      CL36  0x7f       /* Channel 36 Connection Label */
 #define                     CIU36  0x80       /* Channel 36 In Use */
-#define                    nCIU36  0x0       
 #define                      CL37  0x7f00     /* Channel 37 Connection Label */
 #define                     CIU37  0x8000     /* Channel 37 In Use */
-#define                    nCIU37  0x0       
 #define                      CL38  0x7f0000   /* Channel 38 Connection Label */
 #define                     CIU38  0x800000   /* Channel 38 In Use */
-#define                    nCIU38  0x0       
 #define                      CL39  0x7f000000 /* Channel 39 Connection Label */
 #define                     CIU39  0x80000000 /* Channel 39 In Use */
-#define                    nCIU39  0x0       
 
 /* Bit masks for MXVR_ALLOC_10 */
 
 #define                      CL40  0x7f       /* Channel 40 Connection Label */
 #define                     CIU40  0x80       /* Channel 40 In Use */
-#define                    nCIU40  0x0       
 #define                      CL41  0x7f00     /* Channel 41 Connection Label */
 #define                     CIU41  0x8000     /* Channel 41 In Use */
-#define                    nCIU41  0x0       
 #define                      CL42  0x7f0000   /* Channel 42 Connection Label */
 #define                     CIU42  0x800000   /* Channel 42 In Use */
-#define                    nCIU42  0x0       
 #define                      CL43  0x7f000000 /* Channel 43 Connection Label */
 #define                     CIU43  0x80000000 /* Channel 43 In Use */
-#define                    nCIU43  0x0       
 
 /* Bit masks for MXVR_ALLOC_11 */
 
 #define                      CL44  0x7f       /* Channel 44 Connection Label */
 #define                     CIU44  0x80       /* Channel 44 In Use */
-#define                    nCIU44  0x0       
 #define                      CL45  0x7f00     /* Channel 45 Connection Label */
 #define                     CIU45  0x8000     /* Channel 45 In Use */
-#define                    nCIU45  0x0       
 #define                      CL46  0x7f0000   /* Channel 46 Connection Label */
 #define                     CIU46  0x800000   /* Channel 46 In Use */
-#define                    nCIU46  0x0       
 #define                      CL47  0x7f000000 /* Channel 47 Connection Label */
 #define                     CIU47  0x80000000 /* Channel 47 In Use */
-#define                    nCIU47  0x0       
 
 /* Bit masks for MXVR_ALLOC_12 */
 
 #define                      CL48  0x7f       /* Channel 48 Connection Label */
 #define                     CIU48  0x80       /* Channel 48 In Use */
-#define                    nCIU48  0x0       
 #define                      CL49  0x7f00     /* Channel 49 Connection Label */
 #define                     CIU49  0x8000     /* Channel 49 In Use */
-#define                    nCIU49  0x0       
 #define                      CL50  0x7f0000   /* Channel 50 Connection Label */
 #define                     CIU50  0x800000   /* Channel 50 In Use */
-#define                    nCIU50  0x0       
 #define                      CL51  0x7f000000 /* Channel 51 Connection Label */
 #define                     CIU51  0x80000000 /* Channel 51 In Use */
-#define                    nCIU51  0x0       
 
 /* Bit masks for MXVR_ALLOC_13 */
 
 #define                      CL52  0x7f       /* Channel 52 Connection Label */
 #define                     CIU52  0x80       /* Channel 52 In Use */
-#define                    nCIU52  0x0       
 #define                      CL53  0x7f00     /* Channel 53 Connection Label */
 #define                     CIU53  0x8000     /* Channel 53 In Use */
-#define                    nCIU53  0x0       
 #define                      CL54  0x7f0000   /* Channel 54 Connection Label */
 #define                     CIU54  0x800000   /* Channel 54 In Use */
-#define                    nCIU54  0x0       
 #define                      CL55  0x7f000000 /* Channel 55 Connection Label */
 #define                     CIU55  0x80000000 /* Channel 55 In Use */
-#define                    nCIU55  0x0       
 
 /* Bit masks for MXVR_ALLOC_14 */
 
 #define                      CL56  0x7f       /* Channel 56 Connection Label */
 #define                     CIU56  0x80       /* Channel 56 In Use */
-#define                    nCIU56  0x0       
 #define                      CL57  0x7f00     /* Channel 57 Connection Label */
 #define                     CIU57  0x8000     /* Channel 57 In Use */
-#define                    nCIU57  0x0       
 #define                      CL58  0x7f0000   /* Channel 58 Connection Label */
 #define                     CIU58  0x800000   /* Channel 58 In Use */
-#define                    nCIU58  0x0       
 #define                      CL59  0x7f000000 /* Channel 59 Connection Label */
 #define                     CIU59  0x80000000 /* Channel 59 In Use */
-#define                    nCIU59  0x0       
 
 /* MXVR_SYNC_LCHAN_0 Masks */
 
@@ -1926,19 +1669,13 @@
 /* Bit masks for MXVR_DMAx_CONFIG */
 
 #define                    MDMAEN  0x1        /* DMA Channel Enable */
-#define                   nMDMAEN  0x0       
 #define                        DD  0x2        /* DMA Channel Direction */
-#define                       nDD  0x0       
 #define                 BY4SWAPEN  0x20       /* DMA Channel Four Byte Swap Enable */
-#define                nBY4SWAPEN  0x0       
 #define                     LCHAN  0x3c0      /* DMA Channel Logical Channel */
 #define                 BITSWAPEN  0x400      /* DMA Channel Bit Swap Enable */
-#define                nBITSWAPEN  0x0       
 #define                 BY2SWAPEN  0x800      /* DMA Channel Two Byte Swap Enable */
-#define                nBY2SWAPEN  0x0       
 #define                     MFLOW  0x7000     /* DMA Channel Operation Flow */
 #define                   FIXEDPM  0x80000    /* DMA Channel Fixed Pattern Matching Select */
-#define                  nFIXEDPM  0x0       
 #define                  STARTPAT  0x300000   /* DMA Channel Start Pattern Select */
 #define                   STOPPAT  0xc00000   /* DMA Channel Stop Pattern Select */
 #define                  COUNTPOS  0x1c000000 /* DMA Channel Count Position */
@@ -1946,94 +1683,71 @@
 /* Bit masks for MXVR_AP_CTL */
 
 #define                   STARTAP  0x1        /* Start Asynchronous Packet Transmission */
-#define                  nSTARTAP  0x0       
 #define                  CANCELAP  0x2        /* Cancel Asynchronous Packet Transmission */
-#define                 nCANCELAP  0x0       
 #define                   RESETAP  0x4        /* Reset Asynchronous Packet Arbitration */
-#define                  nRESETAP  0x0       
 #define                    APRBE0  0x4000     /* Asynchronous Packet Receive Buffer Entry 0 */
-#define                   nAPRBE0  0x0       
 #define                    APRBE1  0x8000     /* Asynchronous Packet Receive Buffer Entry 1 */
-#define                   nAPRBE1  0x0       
 
 /* Bit masks for MXVR_APRB_START_ADDR */
 
-#define      MXVR_APRB_START_ADDR  0x1fffffe  /* Asynchronous Packet Receive Buffer Start Address */
+#define      MXVR_APRB_START_ADDR_MASK  0x1fffffe  /* Asynchronous Packet Receive Buffer Start Address */
 
 /* Bit masks for MXVR_APRB_CURR_ADDR */
 
-#define       MXVR_APRB_CURR_ADDR  0xffffffff /* Asynchronous Packet Receive Buffer Current Address */
+#define       MXVR_APRB_CURR_ADDR_MASK  0xffffffff /* Asynchronous Packet Receive Buffer Current Address */
 
 /* Bit masks for MXVR_APTB_START_ADDR */
 
-#define       MXVR_APTB_START_ADDR  0x1fffffe  /* Asynchronous Packet Transmit Buffer Start Address */
+#define       MXVR_APTB_START_ADDR_MASK  0x1fffffe  /* Asynchronous Packet Transmit Buffer Start Address */
 
 /* Bit masks for MXVR_APTB_CURR_ADDR */
 
-#define        MXVR_APTB_CURR_ADDR  0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */
+#define        MXVR_APTB_CURR_ADDR_MASK  0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */
 
 /* Bit masks for MXVR_CM_CTL */
 
 #define                   STARTCM  0x1        /* Start Control Message Transmission */
-#define                  nSTARTCM  0x0       
 #define                  CANCELCM  0x2        /* Cancel Control Message Transmission */
-#define                 nCANCELCM  0x0       
 #define                    CMRBE0  0x10000    /* Control Message Receive Buffer Entry 0 */
-#define                   nCMRBE0  0x0       
 #define                    CMRBE1  0x20000    /* Control Message Receive Buffer Entry 1 */
-#define                   nCMRBE1  0x0       
 #define                    CMRBE2  0x40000    /* Control Message Receive Buffer Entry 2 */
-#define                   nCMRBE2  0x0       
 #define                    CMRBE3  0x80000    /* Control Message Receive Buffer Entry 3 */
-#define                   nCMRBE3  0x0       
 #define                    CMRBE4  0x100000   /* Control Message Receive Buffer Entry 4 */
-#define                   nCMRBE4  0x0       
 #define                    CMRBE5  0x200000   /* Control Message Receive Buffer Entry 5 */
-#define                   nCMRBE5  0x0       
 #define                    CMRBE6  0x400000   /* Control Message Receive Buffer Entry 6 */
-#define                   nCMRBE6  0x0       
 #define                    CMRBE7  0x800000   /* Control Message Receive Buffer Entry 7 */
-#define                   nCMRBE7  0x0       
 #define                    CMRBE8  0x1000000  /* Control Message Receive Buffer Entry 8 */
-#define                   nCMRBE8  0x0       
 #define                    CMRBE9  0x2000000  /* Control Message Receive Buffer Entry 9 */
-#define                   nCMRBE9  0x0       
 #define                   CMRBE10  0x4000000  /* Control Message Receive Buffer Entry 10 */
-#define                  nCMRBE10  0x0       
 #define                   CMRBE11  0x8000000  /* Control Message Receive Buffer Entry 11 */
-#define                  nCMRBE11  0x0       
 #define                   CMRBE12  0x10000000 /* Control Message Receive Buffer Entry 12 */
-#define                  nCMRBE12  0x0       
 #define                   CMRBE13  0x20000000 /* Control Message Receive Buffer Entry 13 */
-#define                  nCMRBE13  0x0       
 #define                   CMRBE14  0x40000000 /* Control Message Receive Buffer Entry 14 */
-#define                  nCMRBE14  0x0       
 #define                   CMRBE15  0x80000000 /* Control Message Receive Buffer Entry 15 */
-#define                  nCMRBE15  0x0       
 
 /* Bit masks for MXVR_CMRB_START_ADDR */
 
-#define      MXVR_CMRB_START_ADDR  0x1fffffe  /* Control Message Receive Buffer Start Address */
+#define      MXVR_CMRB_START_ADDR_MASK  0x1fffffe  /* Control Message Receive Buffer Start Address */
 
 /* Bit masks for MXVR_CMRB_CURR_ADDR */
 
-#define       MXVR_CMRB_CURR_ADDR  0xffffffff /* Control Message Receive Buffer Current Address */
+#define       MXVR_CMRB_CURR_ADDR_MASK  0xffffffff /* Control Message Receive Buffer Current Address */
 
 /* Bit masks for MXVR_CMTB_START_ADDR */
 
-#define      MXVR_CMTB_START_ADDR  0x1fffffe  /* Control Message Transmit Buffer Start Address */
+#define      MXVR_CMTB_START_ADDR_MASK  0x1fffffe  /* Control Message Transmit Buffer Start Address */
 
 /* Bit masks for MXVR_CMTB_CURR_ADDR */
 
-#define       MXVR_CMTB_CURR_ADDR  0xffffffff /* Control Message Transmit Buffer Current Address */
+#define       MXVR_CMTB_CURR_ADDR_MASK  0xffffffff /* Control Message Transmit Buffer Current Address */
 
 /* Bit masks for MXVR_RRDB_START_ADDR */
 
-#define      MXVR_RRDB_START_ADDR  0x1fffffe  /* Remote Read Buffer Start Address */
+#define      MXVR_RRDB_START_ADDR_MASK  0x1fffffe  /* Remote Read Buffer Start Address */
 
 /* Bit masks for MXVR_RRDB_CURR_ADDR */
 
-#define       MXVR_RRDB_CURR_ADDR  0xffffffff /* Remote Read Buffer Current Address */
+#define       MXVR_RRDB_CURR_ADDR_MASK  0xffffffff /* Remote Read Buffer Current Address */
 
 /* Bit masks for MXVR_PAT_DATAx */
 
@@ -2045,136 +1759,72 @@
 /* Bit masks for MXVR_PAT_EN_0 */
 
 #define              MATCH_EN_0_0  0x1        /* Pattern Match Enable Byte 0 Bit 0 */
-#define             nMATCH_EN_0_0  0x0       
 #define              MATCH_EN_0_1  0x2        /* Pattern Match Enable Byte 0 Bit 1 */
-#define             nMATCH_EN_0_1  0x0       
 #define              MATCH_EN_0_2  0x4        /* Pattern Match Enable Byte 0 Bit 2 */
-#define             nMATCH_EN_0_2  0x0       
 #define              MATCH_EN_0_3  0x8        /* Pattern Match Enable Byte 0 Bit 3 */
-#define             nMATCH_EN_0_3  0x0       
 #define              MATCH_EN_0_4  0x10       /* Pattern Match Enable Byte 0 Bit 4 */
-#define             nMATCH_EN_0_4  0x0       
 #define              MATCH_EN_0_5  0x20       /* Pattern Match Enable Byte 0 Bit 5 */
-#define             nMATCH_EN_0_5  0x0       
 #define              MATCH_EN_0_6  0x40       /* Pattern Match Enable Byte 0 Bit 6 */
-#define             nMATCH_EN_0_6  0x0       
 #define              MATCH_EN_0_7  0x80       /* Pattern Match Enable Byte 0 Bit 7 */
-#define             nMATCH_EN_0_7  0x0       
 #define              MATCH_EN_1_0  0x100      /* Pattern Match Enable Byte 1 Bit 0 */
-#define             nMATCH_EN_1_0  0x0       
 #define              MATCH_EN_1_1  0x200      /* Pattern Match Enable Byte 1 Bit 1 */
-#define             nMATCH_EN_1_1  0x0       
 #define              MATCH_EN_1_2  0x400      /* Pattern Match Enable Byte 1 Bit 2 */
-#define             nMATCH_EN_1_2  0x0       
 #define              MATCH_EN_1_3  0x800      /* Pattern Match Enable Byte 1 Bit 3 */
-#define             nMATCH_EN_1_3  0x0       
 #define              MATCH_EN_1_4  0x1000     /* Pattern Match Enable Byte 1 Bit 4 */
-#define             nMATCH_EN_1_4  0x0       
 #define              MATCH_EN_1_5  0x2000     /* Pattern Match Enable Byte 1 Bit 5 */
-#define             nMATCH_EN_1_5  0x0       
 #define              MATCH_EN_1_6  0x4000     /* Pattern Match Enable Byte 1 Bit 6 */
-#define             nMATCH_EN_1_6  0x0       
 #define              MATCH_EN_1_7  0x8000     /* Pattern Match Enable Byte 1 Bit 7 */
-#define             nMATCH_EN_1_7  0x0       
 #define              MATCH_EN_2_0  0x10000    /* Pattern Match Enable Byte 2 Bit 0 */
-#define             nMATCH_EN_2_0  0x0       
 #define              MATCH_EN_2_1  0x20000    /* Pattern Match Enable Byte 2 Bit 1 */
-#define             nMATCH_EN_2_1  0x0       
 #define              MATCH_EN_2_2  0x40000    /* Pattern Match Enable Byte 2 Bit 2 */
-#define             nMATCH_EN_2_2  0x0       
 #define              MATCH_EN_2_3  0x80000    /* Pattern Match Enable Byte 2 Bit 3 */
-#define             nMATCH_EN_2_3  0x0       
 #define              MATCH_EN_2_4  0x100000   /* Pattern Match Enable Byte 2 Bit 4 */
-#define             nMATCH_EN_2_4  0x0       
 #define              MATCH_EN_2_5  0x200000   /* Pattern Match Enable Byte 2 Bit 5 */
-#define             nMATCH_EN_2_5  0x0       
 #define              MATCH_EN_2_6  0x400000   /* Pattern Match Enable Byte 2 Bit 6 */
-#define             nMATCH_EN_2_6  0x0       
 #define              MATCH_EN_2_7  0x800000   /* Pattern Match Enable Byte 2 Bit 7 */
-#define             nMATCH_EN_2_7  0x0       
 #define              MATCH_EN_3_0  0x1000000  /* Pattern Match Enable Byte 3 Bit 0 */
-#define             nMATCH_EN_3_0  0x0       
 #define              MATCH_EN_3_1  0x2000000  /* Pattern Match Enable Byte 3 Bit 1 */
-#define             nMATCH_EN_3_1  0x0       
 #define              MATCH_EN_3_2  0x4000000  /* Pattern Match Enable Byte 3 Bit 2 */
-#define             nMATCH_EN_3_2  0x0       
 #define              MATCH_EN_3_3  0x8000000  /* Pattern Match Enable Byte 3 Bit 3 */
-#define             nMATCH_EN_3_3  0x0       
 #define              MATCH_EN_3_4  0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
-#define             nMATCH_EN_3_4  0x0       
 #define              MATCH_EN_3_5  0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
-#define             nMATCH_EN_3_5  0x0       
 #define              MATCH_EN_3_6  0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
-#define             nMATCH_EN_3_6  0x0       
 #define              MATCH_EN_3_7  0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
-#define             nMATCH_EN_3_7  0x0       
 
 /* Bit masks for MXVR_PAT_EN_1 */
 
 #define              MATCH_EN_0_0  0x1        /* Pattern Match Enable Byte 0 Bit 0 */
-#define             nMATCH_EN_0_0  0x0       
 #define              MATCH_EN_0_1  0x2        /* Pattern Match Enable Byte 0 Bit 1 */
-#define             nMATCH_EN_0_1  0x0       
 #define              MATCH_EN_0_2  0x4        /* Pattern Match Enable Byte 0 Bit 2 */
-#define             nMATCH_EN_0_2  0x0       
 #define              MATCH_EN_0_3  0x8        /* Pattern Match Enable Byte 0 Bit 3 */
-#define             nMATCH_EN_0_3  0x0       
 #define              MATCH_EN_0_4  0x10       /* Pattern Match Enable Byte 0 Bit 4 */
-#define             nMATCH_EN_0_4  0x0       
 #define              MATCH_EN_0_5  0x20       /* Pattern Match Enable Byte 0 Bit 5 */
-#define             nMATCH_EN_0_5  0x0       
 #define              MATCH_EN_0_6  0x40       /* Pattern Match Enable Byte 0 Bit 6 */
-#define             nMATCH_EN_0_6  0x0       
 #define              MATCH_EN_0_7  0x80       /* Pattern Match Enable Byte 0 Bit 7 */
-#define             nMATCH_EN_0_7  0x0       
 #define              MATCH_EN_1_0  0x100      /* Pattern Match Enable Byte 1 Bit 0 */
-#define             nMATCH_EN_1_0  0x0       
 #define              MATCH_EN_1_1  0x200      /* Pattern Match Enable Byte 1 Bit 1 */
-#define             nMATCH_EN_1_1  0x0       
 #define              MATCH_EN_1_2  0x400      /* Pattern Match Enable Byte 1 Bit 2 */
-#define             nMATCH_EN_1_2  0x0       
 #define              MATCH_EN_1_3  0x800      /* Pattern Match Enable Byte 1 Bit 3 */
-#define             nMATCH_EN_1_3  0x0       
 #define              MATCH_EN_1_4  0x1000     /* Pattern Match Enable Byte 1 Bit 4 */
-#define             nMATCH_EN_1_4  0x0       
 #define              MATCH_EN_1_5  0x2000     /* Pattern Match Enable Byte 1 Bit 5 */
-#define             nMATCH_EN_1_5  0x0       
 #define              MATCH_EN_1_6  0x4000     /* Pattern Match Enable Byte 1 Bit 6 */
-#define             nMATCH_EN_1_6  0x0       
 #define              MATCH_EN_1_7  0x8000     /* Pattern Match Enable Byte 1 Bit 7 */
-#define             nMATCH_EN_1_7  0x0       
 #define              MATCH_EN_2_0  0x10000    /* Pattern Match Enable Byte 2 Bit 0 */
-#define             nMATCH_EN_2_0  0x0       
 #define              MATCH_EN_2_1  0x20000    /* Pattern Match Enable Byte 2 Bit 1 */
-#define             nMATCH_EN_2_1  0x0       
 #define              MATCH_EN_2_2  0x40000    /* Pattern Match Enable Byte 2 Bit 2 */
-#define             nMATCH_EN_2_2  0x0       
 #define              MATCH_EN_2_3  0x80000    /* Pattern Match Enable Byte 2 Bit 3 */
-#define             nMATCH_EN_2_3  0x0       
 #define              MATCH_EN_2_4  0x100000   /* Pattern Match Enable Byte 2 Bit 4 */
-#define             nMATCH_EN_2_4  0x0       
 #define              MATCH_EN_2_5  0x200000   /* Pattern Match Enable Byte 2 Bit 5 */
-#define             nMATCH_EN_2_5  0x0       
 #define              MATCH_EN_2_6  0x400000   /* Pattern Match Enable Byte 2 Bit 6 */
-#define             nMATCH_EN_2_6  0x0       
 #define              MATCH_EN_2_7  0x800000   /* Pattern Match Enable Byte 2 Bit 7 */
-#define             nMATCH_EN_2_7  0x0       
 #define              MATCH_EN_3_0  0x1000000  /* Pattern Match Enable Byte 3 Bit 0 */
-#define             nMATCH_EN_3_0  0x0       
 #define              MATCH_EN_3_1  0x2000000  /* Pattern Match Enable Byte 3 Bit 1 */
-#define             nMATCH_EN_3_1  0x0       
 #define              MATCH_EN_3_2  0x4000000  /* Pattern Match Enable Byte 3 Bit 2 */
-#define             nMATCH_EN_3_2  0x0       
 #define              MATCH_EN_3_3  0x8000000  /* Pattern Match Enable Byte 3 Bit 3 */
-#define             nMATCH_EN_3_3  0x0       
 #define              MATCH_EN_3_4  0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
-#define             nMATCH_EN_3_4  0x0       
 #define              MATCH_EN_3_5  0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
-#define             nMATCH_EN_3_5  0x0       
 #define              MATCH_EN_3_6  0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
-#define             nMATCH_EN_3_6  0x0       
 #define              MATCH_EN_3_7  0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
-#define             nMATCH_EN_3_7  0x0       
 
 /* Bit masks for MXVR_FRAME_CNT_0 */
 
@@ -2188,226 +1838,166 @@
 
 #define                    TX_CH0  0x3f       /* Transmit Channel 0 */
 #define                  MUTE_CH0  0x80       /* Mute Channel 0 */
-#define                 nMUTE_CH0  0x0       
 #define                    TX_CH1  0x3f00     /* Transmit Channel 0 */
 #define                  MUTE_CH1  0x8000     /* Mute Channel 0 */
-#define                 nMUTE_CH1  0x0       
 #define                    TX_CH2  0x3f0000   /* Transmit Channel 0 */
 #define                  MUTE_CH2  0x800000   /* Mute Channel 0 */
-#define                 nMUTE_CH2  0x0       
 #define                    TX_CH3  0x3f000000 /* Transmit Channel 0 */
 #define                  MUTE_CH3  0x80000000 /* Mute Channel 0 */
-#define                 nMUTE_CH3  0x0       
 
 /* Bit masks for MXVR_ROUTING_1 */
 
 #define                    TX_CH4  0x3f       /* Transmit Channel 4 */
 #define                  MUTE_CH4  0x80       /* Mute Channel 4 */
-#define                 nMUTE_CH4  0x0       
 #define                    TX_CH5  0x3f00     /* Transmit Channel 5 */
 #define                  MUTE_CH5  0x8000     /* Mute Channel 5 */
-#define                 nMUTE_CH5  0x0       
 #define                    TX_CH6  0x3f0000   /* Transmit Channel 6 */
 #define                  MUTE_CH6  0x800000   /* Mute Channel 6 */
-#define                 nMUTE_CH6  0x0       
 #define                    TX_CH7  0x3f000000 /* Transmit Channel 7 */
 #define                  MUTE_CH7  0x80000000 /* Mute Channel 7 */
-#define                 nMUTE_CH7  0x0       
 
 /* Bit masks for MXVR_ROUTING_2 */
 
 #define                    TX_CH8  0x3f       /* Transmit Channel 8 */
 #define                  MUTE_CH8  0x80       /* Mute Channel 8 */
-#define                 nMUTE_CH8  0x0       
 #define                    TX_CH9  0x3f00     /* Transmit Channel 9 */
 #define                  MUTE_CH9  0x8000     /* Mute Channel 9 */
-#define                 nMUTE_CH9  0x0       
 #define                   TX_CH10  0x3f0000   /* Transmit Channel 10 */
 #define                 MUTE_CH10  0x800000   /* Mute Channel 10 */
-#define                nMUTE_CH10  0x0       
 #define                   TX_CH11  0x3f000000 /* Transmit Channel 11 */
 #define                 MUTE_CH11  0x80000000 /* Mute Channel 11 */
-#define                nMUTE_CH11  0x0       
 
 /* Bit masks for MXVR_ROUTING_3 */
 
 #define                   TX_CH12  0x3f       /* Transmit Channel 12 */
 #define                 MUTE_CH12  0x80       /* Mute Channel 12 */
-#define                nMUTE_CH12  0x0       
 #define                   TX_CH13  0x3f00     /* Transmit Channel 13 */
 #define                 MUTE_CH13  0x8000     /* Mute Channel 13 */
-#define                nMUTE_CH13  0x0       
 #define                   TX_CH14  0x3f0000   /* Transmit Channel 14 */
 #define                 MUTE_CH14  0x800000   /* Mute Channel 14 */
-#define                nMUTE_CH14  0x0       
 #define                   TX_CH15  0x3f000000 /* Transmit Channel 15 */
 #define                 MUTE_CH15  0x80000000 /* Mute Channel 15 */
-#define                nMUTE_CH15  0x0       
 
 /* Bit masks for MXVR_ROUTING_4 */
 
 #define                   TX_CH16  0x3f       /* Transmit Channel 16 */
 #define                 MUTE_CH16  0x80       /* Mute Channel 16 */
-#define                nMUTE_CH16  0x0       
 #define                   TX_CH17  0x3f00     /* Transmit Channel 17 */
 #define                 MUTE_CH17  0x8000     /* Mute Channel 17 */
-#define                nMUTE_CH17  0x0       
 #define                   TX_CH18  0x3f0000   /* Transmit Channel 18 */
 #define                 MUTE_CH18  0x800000   /* Mute Channel 18 */
-#define                nMUTE_CH18  0x0       
 #define                   TX_CH19  0x3f000000 /* Transmit Channel 19 */
 #define                 MUTE_CH19  0x80000000 /* Mute Channel 19 */
-#define                nMUTE_CH19  0x0       
 
 /* Bit masks for MXVR_ROUTING_5 */
 
 #define                   TX_CH20  0x3f       /* Transmit Channel 20 */
 #define                 MUTE_CH20  0x80       /* Mute Channel 20 */
-#define                nMUTE_CH20  0x0       
 #define                   TX_CH21  0x3f00     /* Transmit Channel 21 */
 #define                 MUTE_CH21  0x8000     /* Mute Channel 21 */
-#define                nMUTE_CH21  0x0       
 #define                   TX_CH22  0x3f0000   /* Transmit Channel 22 */
 #define                 MUTE_CH22  0x800000   /* Mute Channel 22 */
-#define                nMUTE_CH22  0x0       
 #define                   TX_CH23  0x3f000000 /* Transmit Channel 23 */
 #define                 MUTE_CH23  0x80000000 /* Mute Channel 23 */
-#define                nMUTE_CH23  0x0       
 
 /* Bit masks for MXVR_ROUTING_6 */
 
 #define                   TX_CH24  0x3f       /* Transmit Channel 24 */
 #define                 MUTE_CH24  0x80       /* Mute Channel 24 */
-#define                nMUTE_CH24  0x0       
 #define                   TX_CH25  0x3f00     /* Transmit Channel 25 */
 #define                 MUTE_CH25  0x8000     /* Mute Channel 25 */
-#define                nMUTE_CH25  0x0       
 #define                   TX_CH26  0x3f0000   /* Transmit Channel 26 */
 #define                 MUTE_CH26  0x800000   /* Mute Channel 26 */
-#define                nMUTE_CH26  0x0       
 #define                   TX_CH27  0x3f000000 /* Transmit Channel 27 */
 #define                 MUTE_CH27  0x80000000 /* Mute Channel 27 */
-#define                nMUTE_CH27  0x0       
 
 /* Bit masks for MXVR_ROUTING_7 */
 
 #define                   TX_CH28  0x3f       /* Transmit Channel 28 */
 #define                 MUTE_CH28  0x80       /* Mute Channel 28 */
-#define                nMUTE_CH28  0x0       
 #define                   TX_CH29  0x3f00     /* Transmit Channel 29 */
 #define                 MUTE_CH29  0x8000     /* Mute Channel 29 */
-#define                nMUTE_CH29  0x0       
 #define                   TX_CH30  0x3f0000   /* Transmit Channel 30 */
 #define                 MUTE_CH30  0x800000   /* Mute Channel 30 */
-#define                nMUTE_CH30  0x0       
 #define                   TX_CH31  0x3f000000 /* Transmit Channel 31 */
 #define                 MUTE_CH31  0x80000000 /* Mute Channel 31 */
-#define                nMUTE_CH31  0x0       
 
 /* Bit masks for MXVR_ROUTING_8 */
 
 #define                   TX_CH32  0x3f       /* Transmit Channel 32 */
 #define                 MUTE_CH32  0x80       /* Mute Channel 32 */
-#define                nMUTE_CH32  0x0       
 #define                   TX_CH33  0x3f00     /* Transmit Channel 33 */
 #define                 MUTE_CH33  0x8000     /* Mute Channel 33 */
-#define                nMUTE_CH33  0x0       
 #define                   TX_CH34  0x3f0000   /* Transmit Channel 34 */
 #define                 MUTE_CH34  0x800000   /* Mute Channel 34 */
-#define                nMUTE_CH34  0x0       
 #define                   TX_CH35  0x3f000000 /* Transmit Channel 35 */
 #define                 MUTE_CH35  0x80000000 /* Mute Channel 35 */
-#define                nMUTE_CH35  0x0       
 
 /* Bit masks for MXVR_ROUTING_9 */
 
 #define                   TX_CH36  0x3f       /* Transmit Channel 36 */
 #define                 MUTE_CH36  0x80       /* Mute Channel 36 */
-#define                nMUTE_CH36  0x0       
 #define                   TX_CH37  0x3f00     /* Transmit Channel 37 */
 #define                 MUTE_CH37  0x8000     /* Mute Channel 37 */
-#define                nMUTE_CH37  0x0       
 #define                   TX_CH38  0x3f0000   /* Transmit Channel 38 */
 #define                 MUTE_CH38  0x800000   /* Mute Channel 38 */
-#define                nMUTE_CH38  0x0       
 #define                   TX_CH39  0x3f000000 /* Transmit Channel 39 */
 #define                 MUTE_CH39  0x80000000 /* Mute Channel 39 */
-#define                nMUTE_CH39  0x0       
 
 /* Bit masks for MXVR_ROUTING_10 */
 
 #define                   TX_CH40  0x3f       /* Transmit Channel 40 */
 #define                 MUTE_CH40  0x80       /* Mute Channel 40 */
-#define                nMUTE_CH40  0x0       
 #define                   TX_CH41  0x3f00     /* Transmit Channel 41 */
 #define                 MUTE_CH41  0x8000     /* Mute Channel 41 */
-#define                nMUTE_CH41  0x0       
 #define                   TX_CH42  0x3f0000   /* Transmit Channel 42 */
 #define                 MUTE_CH42  0x800000   /* Mute Channel 42 */
-#define                nMUTE_CH42  0x0       
 #define                   TX_CH43  0x3f000000 /* Transmit Channel 43 */
 #define                 MUTE_CH43  0x80000000 /* Mute Channel 43 */
-#define                nMUTE_CH43  0x0       
 
 /* Bit masks for MXVR_ROUTING_11 */
 
 #define                   TX_CH44  0x3f       /* Transmit Channel 44 */
 #define                 MUTE_CH44  0x80       /* Mute Channel 44 */
-#define                nMUTE_CH44  0x0       
 #define                   TX_CH45  0x3f00     /* Transmit Channel 45 */
 #define                 MUTE_CH45  0x8000     /* Mute Channel 45 */
-#define                nMUTE_CH45  0x0       
 #define                   TX_CH46  0x3f0000   /* Transmit Channel 46 */
 #define                 MUTE_CH46  0x800000   /* Mute Channel 46 */
-#define                nMUTE_CH46  0x0       
 #define                   TX_CH47  0x3f000000 /* Transmit Channel 47 */
 #define                 MUTE_CH47  0x80000000 /* Mute Channel 47 */
-#define                nMUTE_CH47  0x0       
 
 /* Bit masks for MXVR_ROUTING_12 */
 
 #define                   TX_CH48  0x3f       /* Transmit Channel 48 */
 #define                 MUTE_CH48  0x80       /* Mute Channel 48 */
-#define                nMUTE_CH48  0x0       
 #define                   TX_CH49  0x3f00     /* Transmit Channel 49 */
 #define                 MUTE_CH49  0x8000     /* Mute Channel 49 */
-#define                nMUTE_CH49  0x0       
 #define                   TX_CH50  0x3f0000   /* Transmit Channel 50 */
 #define                 MUTE_CH50  0x800000   /* Mute Channel 50 */
-#define                nMUTE_CH50  0x0       
 #define                   TX_CH51  0x3f000000 /* Transmit Channel 51 */
 #define                 MUTE_CH51  0x80000000 /* Mute Channel 51 */
-#define                nMUTE_CH51  0x0       
 
 /* Bit masks for MXVR_ROUTING_13 */
 
 #define                   TX_CH52  0x3f       /* Transmit Channel 52 */
 #define                 MUTE_CH52  0x80       /* Mute Channel 52 */
-#define                nMUTE_CH52  0x0       
 #define                   TX_CH53  0x3f00     /* Transmit Channel 53 */
 #define                 MUTE_CH53  0x8000     /* Mute Channel 53 */
-#define                nMUTE_CH53  0x0       
 #define                   TX_CH54  0x3f0000   /* Transmit Channel 54 */
 #define                 MUTE_CH54  0x800000   /* Mute Channel 54 */
-#define                nMUTE_CH54  0x0       
 #define                   TX_CH55  0x3f000000 /* Transmit Channel 55 */
 #define                 MUTE_CH55  0x80000000 /* Mute Channel 55 */
-#define                nMUTE_CH55  0x0       
 
 /* Bit masks for MXVR_ROUTING_14 */
 
 #define                   TX_CH56  0x3f       /* Transmit Channel 56 */
 #define                 MUTE_CH56  0x80       /* Mute Channel 56 */
-#define                nMUTE_CH56  0x0       
 #define                   TX_CH57  0x3f00     /* Transmit Channel 57 */
 #define                 MUTE_CH57  0x8000     /* Mute Channel 57 */
-#define                nMUTE_CH57  0x0       
 #define                   TX_CH58  0x3f0000   /* Transmit Channel 58 */
 #define                 MUTE_CH58  0x800000   /* Mute Channel 58 */
-#define                nMUTE_CH58  0x0       
 #define                   TX_CH59  0x3f000000 /* Transmit Channel 59 */
 #define                 MUTE_CH59  0x80000000 /* Mute Channel 59 */
-#define                nMUTE_CH59  0x0       
 
 /* Bit masks for MXVR_BLOCK_CNT */
 
@@ -2416,53 +2006,37 @@
 /* Bit masks for MXVR_CLK_CTL */
 
 #define                  MXTALCEN  0x1        /* MXVR Crystal Oscillator Clock Enable */
-#define                 nMXTALCEN  0x0       
 #define                  MXTALFEN  0x2        /* MXVR Crystal Oscillator Feedback Enable */
-#define                 nMXTALFEN  0x0       
 #define                  MXTALMUL  0x30       /* MXVR Crystal Multiplier */
 #define                  CLKX3SEL  0x80       /* Clock Generation Source Select */
-#define                 nCLKX3SEL  0x0       
 #define                   MMCLKEN  0x100      /* Master Clock Enable */
-#define                  nMMCLKEN  0x0       
 #define                  MMCLKMUL  0x1e00     /* Master Clock Multiplication Factor */
 #define                   PLLSMPS  0xe000     /* MXVR PLL State Machine Prescaler */
 #define                   MBCLKEN  0x10000    /* Bit Clock Enable */
-#define                  nMBCLKEN  0x0       
 #define                  MBCLKDIV  0x1e0000   /* Bit Clock Divide Factor */
 #define                     INVRX  0x800000   /* Invert Receive Data */
-#define                    nINVRX  0x0       
 #define                     MFSEN  0x1000000  /* Frame Sync Enable */
-#define                    nMFSEN  0x0       
 #define                    MFSDIV  0x1e000000 /* Frame Sync Divide Factor */
 #define                    MFSSEL  0x60000000 /* Frame Sync Select */
 #define                   MFSSYNC  0x80000000 /* Frame Sync Synchronization Select */
-#define                  nMFSSYNC  0x0       
 
 /* Bit masks for MXVR_CDRPLL_CTL */
 
 #define                   CDRSMEN  0x1        /* MXVR CDRPLL State Machine Enable */
-#define                  nCDRSMEN  0x0       
 #define                   CDRRSTB  0x2        /* MXVR CDRPLL Reset */
-#define                  nCDRRSTB  0x0       
 #define                   CDRSVCO  0x4        /* MXVR CDRPLL Start VCO */
-#define                  nCDRSVCO  0x0       
 #define                   CDRMODE  0x8        /* MXVR CDRPLL CDR Mode Select */
-#define                  nCDRMODE  0x0       
 #define                   CDRSCNT  0x3f0      /* MXVR CDRPLL Start Counter */
 #define                   CDRLCNT  0xfc00     /* MXVR CDRPLL Lock Counter */
 #define                 CDRSHPSEL  0x3f0000   /* MXVR CDRPLL Shaper Select */
 #define                  CDRSHPEN  0x800000   /* MXVR CDRPLL Shaper Enable */
-#define                 nCDRSHPEN  0x0       
 #define                  CDRCPSEL  0xff000000 /* MXVR CDRPLL Charge Pump Current Select */
 
 /* Bit masks for MXVR_FMPLL_CTL */
 
 #define                    FMSMEN  0x1        /* MXVR FMPLL State Machine Enable */
-#define                   nFMSMEN  0x0       
 #define                    FMRSTB  0x2        /* MXVR FMPLL Reset */
-#define                   nFMRSTB  0x0       
 #define                    FMSVCO  0x4        /* MXVR FMPLL Start VCO */
-#define                   nFMSVCO  0x0       
 #define                    FMSCNT  0x3f0      /* MXVR FMPLL Start Counter */
 #define                    FMLCNT  0xfc00     /* MXVR FMPLL Lock Counter */
 #define                   FMCPSEL  0xff000000 /* MXVR FMPLL Charge Pump Current Select */
@@ -2470,15 +2044,10 @@
 /* Bit masks for MXVR_PIN_CTL */
 
 #define                  MTXONBOD  0x1        /* MTXONB Open Drain Select */
-#define                 nMTXONBOD  0x0       
 #define                   MTXONBG  0x2        /* MTXONB Gates MTX Select */
-#define                  nMTXONBG  0x0       
 #define                     MFSOE  0x10       /* MFS Output Enable */
-#define                    nMFSOE  0x0       
 #define                  MFSGPSEL  0x20       /* MFS General Purpose Output Select */
-#define                 nMFSGPSEL  0x0       
 #define                  MFSGPDAT  0x40       /* MFS General Purpose Output Data */
-#define                 nMFSGPDAT  0x0       
 
 /* Bit masks for MXVR_SCLK_CNT */
 
@@ -2487,7 +2056,6 @@
 /* Bit masks for KPAD_CTL */
 
 #define                   KPAD_EN  0x1        /* Keypad Enable */
-#define                  nKPAD_EN  0x0       
 #define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
 #define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
 #define                KPAD_COLEN  0xe000     /* Column Enable Width */
@@ -2509,29 +2077,21 @@
 /* Bit masks for KPAD_STAT */
 
 #define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
-#define                 nKPAD_IRQ  0x0       
 #define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
 #define              KPAD_PRESSED  0x8        /* Key press current status */
-#define             nKPAD_PRESSED  0x0       
 
 /* Bit masks for KPAD_SOFTEVAL */
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
-#define          nKPAD_SOFTEVAL_E  0x0       
 
 /* Bit masks for SDH_COMMAND */
 
 #define                   CMD_IDX  0x3f       /* Command Index */
 #define                   CMD_RSP  0x40       /* Response */
-#define                  nCMD_RSP  0x0       
 #define                 CMD_L_RSP  0x80       /* Long Response */
-#define                nCMD_L_RSP  0x0       
 #define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                nCMD_INT_E  0x0       
 #define                CMD_PEND_E  0x200      /* Command Pending */
-#define               nCMD_PEND_E  0x0       
 #define                     CMD_E  0x400      /* Command Enable */
-#define                    nCMD_E  0x0       
 
 /* Bit masks for SDH_PWR_CTL */
 
@@ -2540,21 +2100,15 @@
 #define                       TBD  0x3c       /* TBD */
 #endif
 #define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                nSD_CMD_OD  0x0       
 #define                   ROD_CTL  0x80       /* Rod Control */
-#define                  nROD_CTL  0x0       
 
 /* Bit masks for SDH_CLK_CTL */
 
 #define                    CLKDIV  0xff       /* MC_CLK Divisor */
 #define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                    nCLK_E  0x0       
 #define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define                 nPWR_SV_E  0x0       
 #define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define            nCLKDIV_BYPASS  0x0       
 #define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-#define                 nWIDE_BUS  0x0       
 
 /* Bit masks for SDH_RESP_CMD */
 
@@ -2563,133 +2117,74 @@
 /* Bit masks for SDH_DATA_CTL */
 
 #define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                    nDTX_E  0x0       
 #define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  nDTX_DIR  0x0       
 #define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 nDTX_MODE  0x0       
 #define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define                nDTX_DMA_E  0x0       
 #define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
 
 /* Bit masks for SDH_STATUS */
 
 #define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define             nCMD_CRC_FAIL  0x0       
 #define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define             nDAT_CRC_FAIL  0x0       
-#define               CMD_TIMEOUT  0x4        /* CMD Time Out */
-#define              nCMD_TIMEOUT  0x0       
-#define               DAT_TIMEOUT  0x8        /* Data Time Out */
-#define              nDAT_TIMEOUT  0x0       
+#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
+#define               DAT_TIME_OUT  0x8        /* Data Time Out */
 #define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define              nTX_UNDERRUN  0x0       
 #define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define               nRX_OVERRUN  0x0       
 #define              CMD_RESP_END  0x40       /* CMD Response End */
-#define             nCMD_RESP_END  0x0       
 #define                  CMD_SENT  0x80       /* CMD Sent */
-#define                 nCMD_SENT  0x0       
 #define                   DAT_END  0x100      /* Data End */
-#define                  nDAT_END  0x0       
 #define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define            nSTART_BIT_ERR  0x0       
 #define               DAT_BLK_END  0x400      /* Data Block End */
-#define              nDAT_BLK_END  0x0       
 #define                   CMD_ACT  0x800      /* CMD Active */
-#define                  nCMD_ACT  0x0       
 #define                    TX_ACT  0x1000     /* Transmit Active */
-#define                   nTX_ACT  0x0       
 #define                    RX_ACT  0x2000     /* Receive Active */
-#define                   nRX_ACT  0x0       
 #define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define             nTX_FIFO_STAT  0x0       
 #define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define             nRX_FIFO_STAT  0x0       
 #define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define             nTX_FIFO_FULL  0x0       
 #define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define             nRX_FIFO_FULL  0x0       
 #define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define             nTX_FIFO_ZERO  0x0       
 #define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define              nRX_DAT_ZERO  0x0       
 #define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               nTX_DAT_RDY  0x0       
 #define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-#define              nRX_FIFO_RDY  0x0       
 
 /* Bit masks for SDH_STATUS_CLR */
 
 #define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define        nCMD_CRC_FAIL_STAT  0x0       
 #define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define        nDAT_CRC_FAIL_STAT  0x0       
 #define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define         nCMD_TIMEOUT_STAT  0x0       
 #define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define         nDAT_TIMEOUT_STAT  0x0       
 #define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define         nTX_UNDERRUN_STAT  0x0       
 #define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define          nRX_OVERRUN_STAT  0x0       
 #define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define        nCMD_RESP_END_STAT  0x0       
 #define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define            nCMD_SENT_STAT  0x0       
 #define              DAT_END_STAT  0x100      /* Data End Status */
-#define             nDAT_END_STAT  0x0       
 #define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define       nSTART_BIT_ERR_STAT  0x0       
 #define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-#define         nDAT_BLK_END_STAT  0x0       
 
 /* Bit masks for SDH_MASK0 */
 
 #define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define        nCMD_CRC_FAIL_MASK  0x0       
 #define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define        nDAT_CRC_FAIL_MASK  0x0       
 #define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define         nCMD_TIMEOUT_MASK  0x0       
 #define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define         nDAT_TIMEOUT_MASK  0x0       
 #define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define         nTX_UNDERRUN_MASK  0x0       
 #define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define          nRX_OVERRUN_MASK  0x0       
 #define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define        nCMD_RESP_END_MASK  0x0       
 #define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define            nCMD_SENT_MASK  0x0       
 #define              DAT_END_MASK  0x100      /* Data End Mask */
-#define             nDAT_END_MASK  0x0       
 #define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define       nSTART_BIT_ERR_MASK  0x0       
 #define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define         nDAT_BLK_END_MASK  0x0       
 #define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define             nCMD_ACT_MASK  0x0       
 #define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define              nTX_ACT_MASK  0x0       
 #define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define              nRX_ACT_MASK  0x0       
 #define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define        nTX_FIFO_STAT_MASK  0x0       
 #define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define        nRX_FIFO_STAT_MASK  0x0       
 #define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define        nTX_FIFO_FULL_MASK  0x0       
 #define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define        nRX_FIFO_FULL_MASK  0x0       
 #define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define        nTX_FIFO_ZERO_MASK  0x0       
 #define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define         nRX_DAT_ZERO_MASK  0x0       
 #define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          nTX_DAT_RDY_MASK  0x0       
 #define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-#define         nRX_FIFO_RDY_MASK  0x0       
 
 /* Bit masks for SDH_FIFO_CNT */
 
@@ -2698,73 +2193,47 @@
 /* Bit masks for SDH_E_STATUS */
 
 #define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define             nSDIO_INT_DET  0x0       
 #define               SD_CARD_DET  0x10       /* SD Card Detect */
-#define              nSD_CARD_DET  0x0       
 
 /* Bit masks for SDH_E_MASK */
 
 #define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                 nSDIO_MSK  0x0       
 #define                   SCD_MSK  0x40       /* Mask Card Detect */
-#define                  nSCD_MSK  0x0       
 
 /* Bit masks for SDH_CFG */
 
 #define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                  nCLKS_EN  0x0       
 #define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                     nSD4E  0x0       
 #define                       MWE  0x8        /* Moving Window Enable */
-#define                      nMWE  0x0       
 #define                    SD_RST  0x10       /* SDMMC Reset */
-#define                   nSD_RST  0x0       
 #define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                nPUP_SDDAT  0x0       
 #define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define               nPUP_SDDAT3  0x0       
 #define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-#define                nPD_SDDAT3  0x0       
 
 /* Bit masks for SDH_RD_WAIT_EN */
 
 #define                       RWR  0x1        /* Read Wait Request */
-#define                      nRWR  0x0       
 
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
-#define                nPIO_START  0x0       
 #define               MULTI_START  0x2        /* Start Multi-DMA Op */
-#define              nMULTI_START  0x0       
 #define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
-#define              nULTRA_START  0x0       
 #define                  XFER_DIR  0x8        /* Transfer Direction */
-#define                 nXFER_DIR  0x0       
 #define                  IORDY_EN  0x10       /* IORDY Enable */
-#define                 nIORDY_EN  0x0       
 #define                FIFO_FLUSH  0x20       /* Flush FIFOs */
-#define               nFIFO_FLUSH  0x0       
 #define                  SOFT_RST  0x40       /* Soft Reset */
-#define                 nSOFT_RST  0x0       
 #define                   DEV_RST  0x80       /* Device Reset */
-#define                  nDEV_RST  0x0       
 #define                TFRCNT_RST  0x100      /* Trans Count Reset */
-#define               nTFRCNT_RST  0x0       
 #define               END_ON_TERM  0x200      /* End/Terminate Select */
-#define              nEND_ON_TERM  0x0       
 #define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
-#define              nPIO_USE_DMA  0x0       
 #define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
 
 /* Bit masks for ATAPI_STATUS */
 
 #define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
-#define              nPIO_XFER_ON  0x0       
 #define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
-#define            nMULTI_XFER_ON  0x0       
 #define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
-#define            nULTRA_XFER_ON  0x0       
 #define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
 
 /* Bit masks for ATAPI_DEV_ADDR */
@@ -2774,66 +2243,39 @@
 /* Bit masks for ATAPI_INT_MASK */
 
 #define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
-#define       nATAPI_DEV_INT_MASK  0x0       
 #define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
-#define            nPIO_DONE_MASK  0x0       
 #define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
-#define          nMULTI_DONE_MASK  0x0       
 #define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
-#define         nUDMAIN_DONE_MASK  0x0       
 #define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
-#define        nUDMAOUT_DONE_MASK  0x0       
 #define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
-#define      nHOST_TERM_XFER_MASK  0x0       
 #define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
-#define          nMULTI_TERM_MASK  0x0       
 #define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define         nUDMAIN_TERM_MASK  0x0       
 #define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
-#define        nUDMAOUT_TERM_MASK  0x0       
 
 /* Bit masks for ATAPI_INT_STATUS */
 
 #define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
-#define            nATAPI_DEV_INT  0x0       
 #define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
-#define             nPIO_DONE_INT  0x0       
 #define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
-#define           nMULTI_DONE_INT  0x0       
 #define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
-#define          nUDMAIN_DONE_INT  0x0       
 #define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
-#define         nUDMAOUT_DONE_INT  0x0       
 #define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
-#define       nHOST_TERM_XFER_INT  0x0       
 #define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
-#define           nMULTI_TERM_INT  0x0       
 #define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define          nUDMAIN_TERM_INT  0x0       
 #define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
-#define         nUDMAOUT_TERM_INT  0x0       
 
 /* Bit masks for ATAPI_LINE_STATUS */
 
 #define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
-#define               nATAPI_INTR  0x0       
 #define                ATAPI_DASP  0x2        /* Device dasp to host line status */
-#define               nATAPI_DASP  0x0       
 #define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
-#define               nATAPI_CS0N  0x0       
 #define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
-#define               nATAPI_CS1N  0x0       
 #define                ATAPI_ADDR  0x70       /* ATAPI address line status */
 #define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
-#define             nATAPI_DMAREQ  0x0       
 #define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
-#define            nATAPI_DMAACKN  0x0       
 #define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
-#define              nATAPI_DIOWN  0x0       
 #define               ATAPI_DIORN  0x400      /* ATAPI read line status */
-#define              nATAPI_DIORN  0x0       
 #define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
-#define              nATAPI_IORDY  0x0       
 
 /* Bit masks for ATAPI_SM_STATE */
 
@@ -2845,7 +2287,6 @@
 /* Bit masks for ATAPI_TERMINATE */
 
 #define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
-#define          nATAPI_HOST_TERM  0x0       
 
 /* Bit masks for ATAPI_REG_TIM_0 */
 
@@ -2900,41 +2341,26 @@
 /* Bit masks for TIMER_ENABLE1 */
 
 #define                    TIMEN8  0x1        /* Timer 8 Enable */
-#define                   nTIMEN8  0x0       
 #define                    TIMEN9  0x2        /* Timer 9 Enable */
-#define                   nTIMEN9  0x0       
 #define                   TIMEN10  0x4        /* Timer 10 Enable */
-#define                  nTIMEN10  0x0       
 
 /* Bit masks for TIMER_DISABLE1 */
 
 #define                   TIMDIS8  0x1        /* Timer 8 Disable */
-#define                  nTIMDIS8  0x0       
 #define                   TIMDIS9  0x2        /* Timer 9 Disable */
-#define                  nTIMDIS9  0x0       
 #define                  TIMDIS10  0x4        /* Timer 10 Disable */
-#define                 nTIMDIS10  0x0       
 
 /* Bit masks for TIMER_STATUS1 */
 
 #define                    TIMIL8  0x1        /* Timer 8 Interrupt */
-#define                   nTIMIL8  0x0       
 #define                    TIMIL9  0x2        /* Timer 9 Interrupt */
-#define                   nTIMIL9  0x0       
 #define                   TIMIL10  0x4        /* Timer 10 Interrupt */
-#define                  nTIMIL10  0x0       
 #define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
-#define                nTOVF_ERR8  0x0       
 #define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
-#define                nTOVF_ERR9  0x0       
 #define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
-#define               nTOVF_ERR10  0x0       
 #define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
-#define                    nTRUN8  0x0       
 #define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
-#define                    nTRUN9  0x0       
 #define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
-#define                   nTRUN10  0x0       
 
 /* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
 
@@ -2945,131 +2371,77 @@
 /* Bit masks for USB_POWER */
 
 #define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
-#define          nENABLE_SUSPENDM  0x0       
 #define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
-#define             nSUSPEND_MODE  0x0       
 #define               RESUME_MODE  0x4        /* DMA Mode */
-#define              nRESUME_MODE  0x0       
 #define                     RESET  0x8        /* Reset indicator */
-#define                    nRESET  0x0       
 #define                   HS_MODE  0x10       /* High Speed mode indicator */
-#define                  nHS_MODE  0x0       
 #define                 HS_ENABLE  0x20       /* high Speed Enable */
-#define                nHS_ENABLE  0x0       
 #define                 SOFT_CONN  0x40       /* Soft connect */
-#define                nSOFT_CONN  0x0       
 #define                ISO_UPDATE  0x80       /* Isochronous update */
-#define               nISO_UPDATE  0x0       
 
 /* Bit masks for USB_INTRTX */
 
 #define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
-#define                   nEP0_TX  0x0       
 #define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
-#define                   nEP1_TX  0x0       
 #define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
-#define                   nEP2_TX  0x0       
 #define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
-#define                   nEP3_TX  0x0       
 #define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
-#define                   nEP4_TX  0x0       
 #define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
-#define                   nEP5_TX  0x0       
 #define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
-#define                   nEP6_TX  0x0       
 #define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
-#define                   nEP7_TX  0x0       
 
 /* Bit masks for USB_INTRRX */
 
 #define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
-#define                   nEP1_RX  0x0       
 #define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
-#define                   nEP2_RX  0x0       
 #define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
-#define                   nEP3_RX  0x0       
 #define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
-#define                   nEP4_RX  0x0       
 #define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
-#define                   nEP5_RX  0x0       
 #define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
-#define                   nEP6_RX  0x0       
 #define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
-#define                   nEP7_RX  0x0       
 
 /* Bit masks for USB_INTRTXE */
 
 #define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
-#define                 nEP0_TX_E  0x0       
 #define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
-#define                 nEP1_TX_E  0x0       
 #define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
-#define                 nEP2_TX_E  0x0       
 #define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
-#define                 nEP3_TX_E  0x0       
 #define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
-#define                 nEP4_TX_E  0x0       
 #define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
-#define                 nEP5_TX_E  0x0       
 #define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
-#define                 nEP6_TX_E  0x0       
 #define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
-#define                 nEP7_TX_E  0x0       
 
 /* Bit masks for USB_INTRRXE */
 
 #define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
-#define                 nEP1_RX_E  0x0       
 #define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
-#define                 nEP2_RX_E  0x0       
 #define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
-#define                 nEP3_RX_E  0x0       
 #define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
-#define                 nEP4_RX_E  0x0       
 #define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
-#define                 nEP5_RX_E  0x0       
 #define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
-#define                 nEP6_RX_E  0x0       
 #define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
-#define                 nEP7_RX_E  0x0       
 
 /* Bit masks for USB_INTRUSB */
 
 #define                 SUSPEND_B  0x1        /* Suspend indicator */
-#define                nSUSPEND_B  0x0       
 #define                  RESUME_B  0x2        /* Resume indicator */
-#define                 nRESUME_B  0x0       
 #define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
-#define         nRESET_OR_BABLE_B  0x0       
 #define                     SOF_B  0x8        /* Start of frame */
-#define                    nSOF_B  0x0       
 #define                    CONN_B  0x10       /* Connection indicator */
-#define                   nCONN_B  0x0       
 #define                  DISCON_B  0x20       /* Disconnect indicator */
-#define                 nDISCON_B  0x0       
 #define             SESSION_REQ_B  0x40       /* Session Request */
-#define            nSESSION_REQ_B  0x0       
 #define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
-#define             nVBUS_ERROR_B  0x0       
 
 /* Bit masks for USB_INTRUSBE */
 
 #define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
-#define               nSUSPEND_BE  0x0       
 #define                 RESUME_BE  0x2        /* Resume indicator int enable */
-#define                nRESUME_BE  0x0       
 #define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
-#define        nRESET_OR_BABLE_BE  0x0       
 #define                    SOF_BE  0x8        /* Start of frame int enable */
-#define                   nSOF_BE  0x0       
 #define                   CONN_BE  0x10       /* Connection indicator int enable */
-#define                  nCONN_BE  0x0       
 #define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
-#define                nDISCON_BE  0x0       
 #define            SESSION_REQ_BE  0x40       /* Session Request int enable */
-#define           nSESSION_REQ_BE  0x0       
 #define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
-#define            nVBUS_ERROR_BE  0x0       
 
 /* Bit masks for USB_FRAME */
 
@@ -3082,117 +2454,67 @@
 /* Bit masks for USB_GLOBAL_CTL */
 
 #define                GLOBAL_ENA  0x1        /* enables USB module */
-#define               nGLOBAL_ENA  0x0       
 #define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
-#define               nEP1_TX_ENA  0x0       
 #define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
-#define               nEP2_TX_ENA  0x0       
 #define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
-#define               nEP3_TX_ENA  0x0       
 #define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
-#define               nEP4_TX_ENA  0x0       
 #define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
-#define               nEP5_TX_ENA  0x0       
 #define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
-#define               nEP6_TX_ENA  0x0       
 #define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
-#define               nEP7_TX_ENA  0x0       
 #define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
-#define               nEP1_RX_ENA  0x0       
 #define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
-#define               nEP2_RX_ENA  0x0       
 #define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
-#define               nEP3_RX_ENA  0x0       
 #define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
-#define               nEP4_RX_ENA  0x0       
 #define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
-#define               nEP5_RX_ENA  0x0       
 #define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
-#define               nEP6_RX_ENA  0x0       
 #define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
-#define               nEP7_RX_ENA  0x0       
 
 /* Bit masks for USB_OTG_DEV_CTL */
 
 #define                   SESSION  0x1        /* session indicator */
-#define                  nSESSION  0x0       
 #define                  HOST_REQ  0x2        /* Host negotiation request */
-#define                 nHOST_REQ  0x0       
 #define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
-#define                nHOST_MODE  0x0       
 #define                     VBUS0  0x8        /* Vbus level indicator[0] */
-#define                    nVBUS0  0x0       
 #define                     VBUS1  0x10       /* Vbus level indicator[1] */
-#define                    nVBUS1  0x0       
 #define                     LSDEV  0x20       /* Low-speed indicator */
-#define                    nLSDEV  0x0       
 #define                     FSDEV  0x40       /* Full or High-speed indicator */
-#define                    nFSDEV  0x0       
 #define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
-#define                 nB_DEVICE  0x0       
 
 /* Bit masks for USB_OTG_VBUS_IRQ */
 
 #define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
-#define            nDRIVE_VBUS_ON  0x0       
 #define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
-#define           nDRIVE_VBUS_OFF  0x0       
 #define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
-#define          nCHRG_VBUS_START  0x0       
 #define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
-#define            nCHRG_VBUS_END  0x0       
 #define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
-#define       nDISCHRG_VBUS_START  0x0       
 #define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
-#define         nDISCHRG_VBUS_END  0x0       
 
 /* Bit masks for USB_OTG_VBUS_MASK */
 
 #define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
-#define        nDRIVE_VBUS_ON_ENA  0x0       
 #define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
-#define       nDRIVE_VBUS_OFF_ENA  0x0       
 #define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
-#define      nCHRG_VBUS_START_ENA  0x0       
 #define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
-#define        nCHRG_VBUS_END_ENA  0x0       
 #define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
-#define   nDISCHRG_VBUS_START_ENA  0x0       
 #define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
-#define     nDISCHRG_VBUS_END_ENA  0x0       
 
 /* Bit masks for USB_CSR0 */
 
 #define                  RXPKTRDY  0x1        /* data packet receive indicator */
-#define                 nRXPKTRDY  0x0       
 #define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
-#define                 nTXPKTRDY  0x0       
 #define                STALL_SENT  0x4        /* STALL handshake sent */
-#define               nSTALL_SENT  0x0       
 #define                   DATAEND  0x8        /* Data end indicator */
-#define                  nDATAEND  0x0       
 #define                  SETUPEND  0x10       /* Setup end */
-#define                 nSETUPEND  0x0       
 #define                 SENDSTALL  0x20       /* Send STALL handshake */
-#define                nSENDSTALL  0x0       
 #define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
-#define        nSERVICED_RXPKTRDY  0x0       
 #define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
-#define        nSERVICED_SETUPEND  0x0       
 #define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
-#define                nFLUSHFIFO  0x0       
 #define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
-#define         nSTALL_RECEIVED_H  0x0       
 #define                SETUPPKT_H  0x8        /* send Setup token host mode */
-#define               nSETUPPKT_H  0x0       
 #define                   ERROR_H  0x10       /* timeout error indicator host mode */
-#define                  nERROR_H  0x0       
 #define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
-#define                 nREQPKT_H  0x0       
 #define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
-#define              nSTATUSPKT_H  0x0       
 #define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
-#define            nNAK_TIMEOUT_H  0x0       
 
 /* Bit masks for USB_COUNT0 */
 
@@ -3213,37 +2535,21 @@
 /* Bit masks for USB_TXCSR */
 
 #define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
-#define               nTXPKTRDY_T  0x0       
 #define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
-#define         nFIFO_NOT_EMPTY_T  0x0       
 #define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
-#define               nUNDERRUN_T  0x0       
 #define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
-#define              nFLUSHFIFO_T  0x0       
 #define              STALL_SEND_T  0x10       /* issue a Stall handshake */
-#define             nSTALL_SEND_T  0x0       
 #define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
-#define             nSTALL_SENT_T  0x0       
 #define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_T  0x0       
 #define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
-#define               nINCOMPTX_T  0x0       
 #define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_T  0x0       
 #define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
-#define       nFORCE_DATATOGGLE_T  0x0       
 #define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_T  0x0       
 #define                     ISO_T  0x4000     /* enable Isochronous transfers */
-#define                    nISO_T  0x0       
 #define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
-#define                nAUTOSET_T  0x0       
 #define                  ERROR_TH  0x4        /* error condition host mode */
-#define                 nERROR_TH  0x0       
 #define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_TH  0x0       
 #define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
-#define           nNAK_TIMEOUT_TH  0x0       
 
 /* Bit masks for USB_TXCOUNT */
 
@@ -3252,45 +2558,25 @@
 /* Bit masks for USB_RXCSR */
 
 #define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
-#define               nRXPKTRDY_R  0x0       
 #define               FIFO_FULL_R  0x2        /* FIFO not empty */
-#define              nFIFO_FULL_R  0x0       
 #define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
-#define                nOVERRUN_R  0x0       
 #define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
-#define              nDATAERROR_R  0x0       
 #define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
-#define              nFLUSHFIFO_R  0x0       
 #define              STALL_SEND_R  0x20       /* issue a Stall handshake */
-#define             nSTALL_SEND_R  0x0       
 #define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
-#define             nSTALL_SENT_R  0x0       
 #define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_R  0x0       
 #define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
-#define               nINCOMPRX_R  0x0       
 #define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_R  0x0       
 #define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
-#define                nDISNYET_R  0x0       
 #define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_R  0x0       
 #define                     ISO_R  0x4000     /* enable Isochronous transfers */
-#define                    nISO_R  0x0       
 #define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
-#define              nAUTOCLEAR_R  0x0       
 #define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
-#define                 nERROR_RH  0x0       
 #define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
-#define                nREQPKT_RH  0x0       
 #define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_RH  0x0       
 #define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
-#define              nINCOMPRX_RH  0x0       
 #define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
-#define            nDMAREQMODE_RH  0x0       
 #define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
-#define               nAUTOREQ_RH  0x0       
 
 /* Bit masks for USB_RXCOUNT */
 
@@ -3317,35 +2603,22 @@
 /* Bit masks for USB_DMA_INTERRUPT */
 
 #define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
-#define                 nDMA0_INT  0x0       
 #define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
-#define                 nDMA1_INT  0x0       
 #define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
-#define                 nDMA2_INT  0x0       
 #define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
-#define                 nDMA3_INT  0x0       
 #define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
-#define                 nDMA4_INT  0x0       
 #define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
-#define                 nDMA5_INT  0x0       
 #define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
-#define                 nDMA6_INT  0x0       
 #define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
-#define                 nDMA7_INT  0x0       
 
 /* Bit masks for USB_DMAxCONTROL */
 
 #define                   DMA_ENA  0x1        /* DMA enable */
-#define                  nDMA_ENA  0x0       
 #define                 DIRECTION  0x2        /* direction of DMA transfer */
-#define                nDIRECTION  0x0       
 #define                      MODE  0x4        /* DMA Bus error */
-#define                     nMODE  0x0       
 #define                   INT_ENA  0x8        /* Interrupt enable */
-#define                  nINT_ENA  0x0       
 #define                     EPNUM  0xf0       /* EP number */
 #define                  BUSERROR  0x100      /* DMA Bus error */
-#define                 nBUSERROR  0x0       
 
 /* Bit masks for USB_DMAxADDRHIGH */
 
@@ -3366,26 +2639,16 @@
 /* Bit masks for HMDMAx_CONTROL */
 
 #define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
-#define                  nHMDMAEN  0x0       
 #define                       REP  0x2        /* Handshake MDMA Request Polarity */
-#define                      nREP  0x0       
 #define                       UTE  0x8        /* Urgency Threshold Enable */
-#define                      nUTE  0x0       
 #define                       OIE  0x10       /* Overflow Interrupt Enable */
-#define                      nOIE  0x0       
 #define                      BDIE  0x20       /* Block Done Interrupt Enable */
-#define                     nBDIE  0x0       
 #define                      MBDI  0x40       /* Mask Block Done Interrupt */
-#define                     nMBDI  0x0       
 #define                       DRQ  0x300      /* Handshake MDMA Request Type */
 #define                       RBC  0x1000     /* Force Reload of BCOUNT */
-#define                      nRBC  0x0       
 #define                        PS  0x2000     /* Pin Status */
-#define                       nPS  0x0       
 #define                        OI  0x4000     /* Overflow Interrupt Generated */
-#define                       nOI  0x0       
 #define                       BDI  0x8000     /* Block Done Interrupt Generated */
-#define                      nBDI  0x0       
 
 /* ******************************************* */
 /*     MULTI BIT MACRO ENUMERATIONS            */
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h
index a1b200f..2381ac5 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h
@@ -46,7 +46,7 @@
 
 /* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */
 
-#define                           CHIPID  0xffc00014   
+#define                           CHIPID  0xffc00014
 
 /* System Reset and Interrupt Controller (0xFFC00100 - 0xFFC00104) */
 
@@ -1512,231 +1512,144 @@
 /*     and MULTI BIT READ MACROS                              */
 /* ********************************************************** */
 
+/* SIC_IMASK Masks */
+#define SIC_UNMASK_ALL         0x00000000	/* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL           0xFFFFFFFF	/* Mask all peripheral interrupts */
+#define SIC_MASK(x)	       (1 << (x))	/* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))	/* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL        0x00000000	/* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL         0xFFFFFFFF	/* Wakeup Enable all peripherals */
+#define IWR_ENABLE(x)	       (1 << (x))	/* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x)))	/* Wakeup Disable Peripheral #x */
+
 /* Bit masks for SIC_IAR0 */
 
-#define            IRQ_PLL_WAKEUP  0x1        /* PLL Wakeup */
-#define           nIRQ_PLL_WAKEUP  0x0       
+#define            PLL_WAKEUP  0x1        /* PLL Wakeup */
 
 /* Bit masks for SIC_IWR0, SIC_IMASK0, SIC_ISR0 */
 
-#define              IRQ_DMA0_ERR  0x2        /* DMA Controller 0 Error */
-#define             nIRQ_DMA0_ERR  0x0       
-#define             IRQ_EPPI0_ERR  0x4        /* EPPI0 Error */
-#define            nIRQ_EPPI0_ERR  0x0       
-#define            IRQ_SPORT0_ERR  0x8        /* SPORT0 Error */
-#define           nIRQ_SPORT0_ERR  0x0       
-#define            IRQ_SPORT1_ERR  0x10       /* SPORT1 Error */
-#define           nIRQ_SPORT1_ERR  0x0       
-#define              IRQ_SPI0_ERR  0x20       /* SPI0 Error */
-#define             nIRQ_SPI0_ERR  0x0       
-#define             IRQ_UART0_ERR  0x40       /* UART0 Error */
-#define            nIRQ_UART0_ERR  0x0       
-#define                   IRQ_RTC  0x80       /* Real-Time Clock */
-#define                  nIRQ_RTC  0x0       
-#define                 IRQ_DMA12  0x100      /* DMA Channel 12 */
-#define                nIRQ_DMA12  0x0       
-#define                  IRQ_DMA0  0x200      /* DMA Channel 0 */
-#define                 nIRQ_DMA0  0x0       
-#define                  IRQ_DMA1  0x400      /* DMA Channel 1 */
-#define                 nIRQ_DMA1  0x0       
-#define                  IRQ_DMA2  0x800      /* DMA Channel 2 */
-#define                 nIRQ_DMA2  0x0       
-#define                  IRQ_DMA3  0x1000     /* DMA Channel 3 */
-#define                 nIRQ_DMA3  0x0       
-#define                  IRQ_DMA4  0x2000     /* DMA Channel 4 */
-#define                 nIRQ_DMA4  0x0       
-#define                  IRQ_DMA6  0x4000     /* DMA Channel 6 */
-#define                 nIRQ_DMA6  0x0       
-#define                  IRQ_DMA7  0x8000     /* DMA Channel 7 */
-#define                 nIRQ_DMA7  0x0       
-#define                 IRQ_PINT0  0x80000    /* Pin Interrupt 0 */
-#define                nIRQ_PINT0  0x0       
-#define                 IRQ_PINT1  0x100000   /* Pin Interrupt 1 */
-#define                nIRQ_PINT1  0x0       
-#define                 IRQ_MDMA0  0x200000   /* Memory DMA Stream 0 */
-#define                nIRQ_MDMA0  0x0       
-#define                 IRQ_MDMA1  0x400000   /* Memory DMA Stream 1 */
-#define                nIRQ_MDMA1  0x0       
-#define                  IRQ_WDOG  0x800000   /* Watchdog Timer */
-#define                 nIRQ_WDOG  0x0       
-#define              IRQ_DMA1_ERR  0x1000000  /* DMA Controller 1 Error */
-#define             nIRQ_DMA1_ERR  0x0       
-#define            IRQ_SPORT2_ERR  0x2000000  /* SPORT2 Error */
-#define           nIRQ_SPORT2_ERR  0x0       
-#define            IRQ_SPORT3_ERR  0x4000000  /* SPORT3 Error */
-#define           nIRQ_SPORT3_ERR  0x0       
-#define               IRQ_MXVR_SD  0x8000000  /* MXVR Synchronous Data */
-#define              nIRQ_MXVR_SD  0x0       
-#define              IRQ_SPI1_ERR  0x10000000 /* SPI1 Error */
-#define             nIRQ_SPI1_ERR  0x0       
-#define              IRQ_SPI2_ERR  0x20000000 /* SPI2 Error */
-#define             nIRQ_SPI2_ERR  0x0       
-#define             IRQ_UART1_ERR  0x40000000 /* UART1 Error */
-#define            nIRQ_UART1_ERR  0x0       
-#define             IRQ_UART2_ERR  0x80000000 /* UART2 Error */
-#define            nIRQ_UART2_ERR  0x0       
+#define              DMA0_ERR  0x2        /* DMA Controller 0 Error */
+#define             EPPI0_ERR  0x4        /* EPPI0 Error */
+#define            SPORT0_ERR  0x8        /* SPORT0 Error */
+#define            SPORT1_ERR  0x10       /* SPORT1 Error */
+#define              SPI0_ERR  0x20       /* SPI0 Error */
+#define             UART0_ERR  0x40       /* UART0 Error */
+#define                   RTC  0x80       /* Real-Time Clock */
+#define                 DMA12  0x100      /* DMA Channel 12 */
+#define                  DMA0  0x200      /* DMA Channel 0 */
+#define                  DMA1  0x400      /* DMA Channel 1 */
+#define                  DMA2  0x800      /* DMA Channel 2 */
+#define                  DMA3  0x1000     /* DMA Channel 3 */
+#define                  DMA4  0x2000     /* DMA Channel 4 */
+#define                  DMA6  0x4000     /* DMA Channel 6 */
+#define                  DMA7  0x8000     /* DMA Channel 7 */
+#define                 PINT0  0x80000    /* Pin Interrupt 0 */
+#define                 PINT1  0x100000   /* Pin Interrupt 1 */
+#define                 MDMA0  0x200000   /* Memory DMA Stream 0 */
+#define                 MDMA1  0x400000   /* Memory DMA Stream 1 */
+#define                  WDOG  0x800000   /* Watchdog Timer */
+#define              DMA1_ERR  0x1000000  /* DMA Controller 1 Error */
+#define            SPORT2_ERR  0x2000000  /* SPORT2 Error */
+#define            SPORT3_ERR  0x4000000  /* SPORT3 Error */
+#define               MXVR_SD  0x8000000  /* MXVR Synchronous Data */
+#define              SPI1_ERR  0x10000000 /* SPI1 Error */
+#define              SPI2_ERR  0x20000000 /* SPI2 Error */
+#define             UART1_ERR  0x40000000 /* UART1 Error */
+#define             UART2_ERR  0x80000000 /* UART2 Error */
 
 /* Bit masks for SIC_IWR1, SIC_IMASK1, SIC_ISR1 */
 
-#define              IRQ_CAN0_ERR  0x1        /* CAN0 Error */
-#define             nIRQ_CAN0_ERR  0x0       
-#define                 IRQ_DMA18  0x2        /* DMA Channel 18 */
-#define                nIRQ_DMA18  0x0       
-#define                 IRQ_DMA19  0x4        /* DMA Channel 19 */
-#define                nIRQ_DMA19  0x0       
-#define                 IRQ_DMA20  0x8        /* DMA Channel 20 */
-#define                nIRQ_DMA20  0x0       
-#define                 IRQ_DMA21  0x10       /* DMA Channel 21 */
-#define                nIRQ_DMA21  0x0       
-#define                 IRQ_DMA13  0x20       /* DMA Channel 13 */
-#define                nIRQ_DMA13  0x0       
-#define                 IRQ_DMA14  0x40       /* DMA Channel 14 */
-#define                nIRQ_DMA14  0x0       
-#define                  IRQ_DMA5  0x80       /* DMA Channel 5 */
-#define                 nIRQ_DMA5  0x0       
-#define                 IRQ_DMA23  0x100      /* DMA Channel 23 */
-#define                nIRQ_DMA23  0x0       
-#define                  IRQ_DMA8  0x200      /* DMA Channel 8 */
-#define                 nIRQ_DMA8  0x0       
-#define                  IRQ_DMA9  0x400      /* DMA Channel 9 */
-#define                 nIRQ_DMA9  0x0       
-#define                 IRQ_DMA10  0x800      /* DMA Channel 10 */
-#define                nIRQ_DMA10  0x0       
-#define                 IRQ_DMA11  0x1000     /* DMA Channel 11 */
-#define                nIRQ_DMA11  0x0       
-#define                  IRQ_TWI0  0x2000     /* TWI0 */
-#define                 nIRQ_TWI0  0x0       
-#define                  IRQ_TWI1  0x4000     /* TWI1 */
-#define                 nIRQ_TWI1  0x0       
-#define               IRQ_CAN0_RX  0x8000     /* CAN0 Receive */
-#define              nIRQ_CAN0_RX  0x0       
-#define               IRQ_CAN0_TX  0x10000    /* CAN0 Transmit */
-#define              nIRQ_CAN0_TX  0x0       
-#define                 IRQ_MDMA2  0x20000    /* Memory DMA Stream 0 */
-#define                nIRQ_MDMA2  0x0       
-#define                 IRQ_MDMA3  0x40000    /* Memory DMA Stream 1 */
-#define                nIRQ_MDMA3  0x0       
-#define             IRQ_MXVR_STAT  0x80000    /* MXVR Status */
-#define            nIRQ_MXVR_STAT  0x0       
-#define               IRQ_MXVR_CM  0x100000   /* MXVR Control Message */
-#define              nIRQ_MXVR_CM  0x0       
-#define               IRQ_MXVR_AP  0x200000   /* MXVR Asynchronous Packet */
-#define              nIRQ_MXVR_AP  0x0       
-#define             IRQ_EPPI1_ERR  0x400000   /* EPPI1 Error */
-#define            nIRQ_EPPI1_ERR  0x0       
-#define             IRQ_EPPI2_ERR  0x800000   /* EPPI2 Error */
-#define            nIRQ_EPPI2_ERR  0x0       
-#define             IRQ_UART3_ERR  0x1000000  /* UART3 Error */
-#define            nIRQ_UART3_ERR  0x0       
-#define              IRQ_HOST_ERR  0x2000000  /* Host DMA Port Error */
-#define             nIRQ_HOST_ERR  0x0       
-#define               IRQ_USB_ERR  0x4000000  /* USB Error */
-#define              nIRQ_USB_ERR  0x0       
-#define              IRQ_PIXC_ERR  0x8000000  /* Pixel Compositor Error */
-#define             nIRQ_PIXC_ERR  0x0       
-#define               IRQ_NFC_ERR  0x10000000 /* Nand Flash Controller Error */
-#define              nIRQ_NFC_ERR  0x0       
-#define             IRQ_ATAPI_ERR  0x20000000 /* ATAPI Error */
-#define            nIRQ_ATAPI_ERR  0x0       
-#define              IRQ_CAN1_ERR  0x40000000 /* CAN1 Error */
-#define             nIRQ_CAN1_ERR  0x0       
-#define             IRQ_DMAR0_ERR  0x80000000 /* DMAR0 Overflow Error */
-#define            nIRQ_DMAR0_ERR  0x0       
-#define             IRQ_DMAR1_ERR  0x80000000 /* DMAR1 Overflow Error */
-#define            nIRQ_DMAR1_ERR  0x0       
-#define                 IRQ_DMAR0  0x80000000 /* DMAR0 Block */
-#define                nIRQ_DMAR0  0x0       
-#define                 IRQ_DMAR1  0x80000000 /* DMAR1 Block */
-#define                nIRQ_DMAR1  0x0       
+#define              CAN0_ERR  0x1        /* CAN0 Error */
+#define                 DMA18  0x2        /* DMA Channel 18 */
+#define                 DMA19  0x4        /* DMA Channel 19 */
+#define                 DMA20  0x8        /* DMA Channel 20 */
+#define                 DMA21  0x10       /* DMA Channel 21 */
+#define                 DMA13  0x20       /* DMA Channel 13 */
+#define                 DMA14  0x40       /* DMA Channel 14 */
+#define                  DMA5  0x80       /* DMA Channel 5 */
+#define                 DMA23  0x100      /* DMA Channel 23 */
+#define                  DMA8  0x200      /* DMA Channel 8 */
+#define                  DMA9  0x400      /* DMA Channel 9 */
+#define                 DMA10  0x800      /* DMA Channel 10 */
+#define                 DMA11  0x1000     /* DMA Channel 11 */
+#define                  TWI0  0x2000     /* TWI0 */
+#define                  TWI1  0x4000     /* TWI1 */
+#define               CAN0_RX  0x8000     /* CAN0 Receive */
+#define               CAN0_TX  0x10000    /* CAN0 Transmit */
+#define                 MDMA2  0x20000    /* Memory DMA Stream 0 */
+#define                 MDMA3  0x40000    /* Memory DMA Stream 1 */
+#define             MXVR_STAT  0x80000    /* MXVR Status */
+#define               MXVR_CM  0x100000   /* MXVR Control Message */
+#define               MXVR_AP  0x200000   /* MXVR Asynchronous Packet */
+#define             EPPI1_ERR  0x400000   /* EPPI1 Error */
+#define             EPPI2_ERR  0x800000   /* EPPI2 Error */
+#define             UART3_ERR  0x1000000  /* UART3 Error */
+#define              HOST_ERR  0x2000000  /* Host DMA Port Error */
+#define               USB_ERR  0x4000000  /* USB Error */
+#define              PIXC_ERR  0x8000000  /* Pixel Compositor Error */
+#define               NFC_ERR  0x10000000 /* Nand Flash Controller Error */
+#define             ATAPI_ERR  0x20000000 /* ATAPI Error */
+#define              CAN1_ERR  0x40000000 /* CAN1 Error */
+#define             DMAR0_ERR  0x80000000 /* DMAR0 Overflow Error */
+#define             DMAR1_ERR  0x80000000 /* DMAR1 Overflow Error */
+#define                 DMAR0  0x80000000 /* DMAR0 Block */
+#define                 DMAR1  0x80000000 /* DMAR1 Block */
 
 /* Bit masks for SIC_IWR2, SIC_IMASK2, SIC_ISR2 */
 
-#define                 IRQ_DMA15  0x1        /* DMA Channel 15 */
-#define                nIRQ_DMA15  0x0       
-#define                 IRQ_DMA16  0x2        /* DMA Channel 16 */
-#define                nIRQ_DMA16  0x0       
-#define                 IRQ_DMA17  0x4        /* DMA Channel 17 */
-#define                nIRQ_DMA17  0x0       
-#define                 IRQ_DMA22  0x8        /* DMA Channel 22 */
-#define                nIRQ_DMA22  0x0       
-#define                   IRQ_CNT  0x10       /* Counter */
-#define                  nIRQ_CNT  0x0       
-#define                   IRQ_KEY  0x20       /* Keypad */
-#define                  nIRQ_KEY  0x0       
-#define               IRQ_CAN1_RX  0x40       /* CAN1 Receive */
-#define              nIRQ_CAN1_RX  0x0       
-#define               IRQ_CAN1_TX  0x80       /* CAN1 Transmit */
-#define              nIRQ_CAN1_TX  0x0       
-#define             IRQ_SDH_MASK0  0x100      /* SDH Mask 0 */
-#define            nIRQ_SDH_MASK0  0x0       
-#define             IRQ_SDH_MASK1  0x200      /* SDH Mask 1 */
-#define            nIRQ_SDH_MASK1  0x0       
-#define              IRQ_USB_EINT  0x400      /* USB Exception */
-#define             nIRQ_USB_EINT  0x0       
-#define              IRQ_USB_INT0  0x800      /* USB Interrupt 0 */
-#define             nIRQ_USB_INT0  0x0       
-#define              IRQ_USB_INT1  0x1000     /* USB Interrupt 1 */
-#define             nIRQ_USB_INT1  0x0       
-#define              IRQ_USB_INT2  0x2000     /* USB Interrupt 2 */
-#define             nIRQ_USB_INT2  0x0       
-#define            IRQ_USB_DMAINT  0x4000     /* USB DMA */
-#define           nIRQ_USB_DMAINT  0x0       
-#define                IRQ_OTPSEC  0x8000     /* OTP Access Complete */
-#define               nIRQ_OTPSEC  0x0       
-#define                IRQ_TIMER0  0x400000   /* Timer 0 */
-#define               nIRQ_TIMER0  0x0       
-#define                IRQ_TIMER1  0x800000   /* Timer 1 */
-#define               nIRQ_TIMER1  0x0       
-#define                IRQ_TIMER2  0x1000000  /* Timer 2 */
-#define               nIRQ_TIMER2  0x0       
-#define                IRQ_TIMER3  0x2000000  /* Timer 3 */
-#define               nIRQ_TIMER3  0x0       
-#define                IRQ_TIMER4  0x4000000  /* Timer 4 */
-#define               nIRQ_TIMER4  0x0       
-#define                IRQ_TIMER5  0x8000000  /* Timer 5 */
-#define               nIRQ_TIMER5  0x0       
-#define                IRQ_TIMER6  0x10000000 /* Timer 6 */
-#define               nIRQ_TIMER6  0x0       
-#define                IRQ_TIMER7  0x20000000 /* Timer 7 */
-#define               nIRQ_TIMER7  0x0       
-#define                 IRQ_PINT2  0x40000000 /* Pin Interrupt 2 */
-#define                nIRQ_PINT2  0x0       
-#define                 IRQ_PINT3  0x80000000 /* Pin Interrupt 3 */
-#define                nIRQ_PINT3  0x0       
+#define                 DMA15  0x1        /* DMA Channel 15 */
+#define                 DMA16  0x2        /* DMA Channel 16 */
+#define                 DMA17  0x4        /* DMA Channel 17 */
+#define                 DMA22  0x8        /* DMA Channel 22 */
+#define                   CNT  0x10       /* Counter */
+#define                   KEY  0x20       /* Keypad */
+#define               CAN1_RX  0x40       /* CAN1 Receive */
+#define               CAN1_TX  0x80       /* CAN1 Transmit */
+#define             SDH_INT_MASK0  0x100      /* SDH Mask 0 */
+#define             SDH_INT_MASK1  0x200      /* SDH Mask 1 */
+#define              USB_EINT  0x400      /* USB Exception */
+#define              USB_INT0  0x800      /* USB Interrupt 0 */
+#define              USB_INT1  0x1000     /* USB Interrupt 1 */
+#define              USB_INT2  0x2000     /* USB Interrupt 2 */
+#define            USB_DMAINT  0x4000     /* USB DMA */
+#define                OTPSEC  0x8000     /* OTP Access Complete */
+#define                TIMER0  0x400000   /* Timer 0 */
+#define                TIMER1  0x800000   /* Timer 1 */
+#define                TIMER2  0x1000000  /* Timer 2 */
+#define                TIMER3  0x2000000  /* Timer 3 */
+#define                TIMER4  0x4000000  /* Timer 4 */
+#define                TIMER5  0x8000000  /* Timer 5 */
+#define                TIMER6  0x10000000 /* Timer 6 */
+#define                TIMER7  0x20000000 /* Timer 7 */
+#define                 PINT2  0x40000000 /* Pin Interrupt 2 */
+#define                 PINT3  0x80000000 /* Pin Interrupt 3 */
 
 /* Bit masks for DMAx_CONFIG, MDMA_Sx_CONFIG, MDMA_Dx_CONFIG */
 
 #define                     DMAEN  0x1        /* DMA Channel Enable */
-#define                    nDMAEN  0x0       
 #define                       WNR  0x2        /* DMA Direction */
-#define                      nWNR  0x0       
-#define                    WDSIZE  0xc        /* Transfer Word Size */
+#define                  WDSIZE_8  0x0        /* Transfer Word Size = 8 */
+#define                 WDSIZE_16  0x4        /* Transfer Word Size = 16 */
+#define                 WDSIZE_32  0x8        /* Transfer Word Size = 32 */
 #define                     DMA2D  0x10       /* DMA Mode */
-#define                    nDMA2D  0x0       
 #define                   RESTART  0x20       /* Work Unit Transitions */
-#define                  nRESTART  0x0       
 #define                    DI_SEL  0x40       /* Data Interrupt Timing Select */
-#define                   nDI_SEL  0x0       
 #define                     DI_EN  0x80       /* Data Interrupt Enable */
-#define                    nDI_EN  0x0       
 #define                    NDSIZE  0xf00      /* Flex Descriptor Size */
 #define                   DMAFLOW  0xf000     /* Next Operation */
 
 /* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
 
 #define                  DMA_DONE  0x1        /* DMA Completion Interrupt Status */
-#define                 nDMA_DONE  0x0       
 #define                   DMA_ERR  0x2        /* DMA Error Interrupt Status */
-#define                  nDMA_ERR  0x0       
 #define                    DFETCH  0x4        /* DMA Descriptor Fetch */
-#define                   nDFETCH  0x0       
 #define                   DMA_RUN  0x8        /* DMA Channel Running */
-#define                  nDMA_RUN  0x0       
 
 /* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
 
 #define                     CTYPE  0x40       /* DMA Channel Type */
-#define                    nCTYPE  0x0       
 #define                      PMAP  0xf000     /* Peripheral Mapped To This Channel */
 
 /* Bit masks for DMACx_TCPER */
@@ -1756,29 +1669,28 @@
 /* Bit masks for DMAC1_PERIMUX */
 
 #define                   PMUXSDH  0x1        /* Peripheral Select for DMA22 channel */
-#define                  nPMUXSDH  0x0       
 
-/* Bit masks for EBIU_AMGCTL */
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
+/* EBIU_AMGCTL Masks																	*/
+#define AMCKEN			0x0001		/* Enable CLKOUT									*/
+#define	AMBEN_NONE		0x0000		/* All Banks Disabled								*/
+#define AMBEN_B0		0x0002		/* Enable Async Memory Bank 0 only					*/
+#define AMBEN_B0_B1		0x0004		/* Enable Async Memory Banks 0 & 1 only				*/
+#define AMBEN_B0_B1_B2	0x0006		/* Enable Async Memory Banks 0, 1, and 2			*/
+#define AMBEN_ALL		0x0008		/* Enable Async Memory Banks (all) 0, 1, 2, and 3	*/
 
-#define                    AMCKEN  0x1        /* Async Memory Enable */
-#define                   nAMCKEN  0x0       
-#define                     AMBEN  0xe        /* Async bank enable */
 
 /* Bit masks for EBIU_AMBCTL0 */
 
 #define                   B0RDYEN  0x1        /* Bank 0 ARDY Enable */
-#define                  nB0RDYEN  0x0       
 #define                  B0RDYPOL  0x2        /* Bank 0 ARDY Polarity */
-#define                 nB0RDYPOL  0x0       
 #define                      B0TT  0xc        /* Bank 0 transition time */
 #define                      B0ST  0x30       /* Bank 0 Setup time */
 #define                      B0HT  0xc0       /* Bank 0 Hold time */
 #define                     B0RAT  0xf00      /* Bank 0 Read access time */
 #define                     B0WAT  0xf000     /* Bank 0 write access time */
 #define                   B1RDYEN  0x10000    /* Bank 1 ARDY Enable */
-#define                  nB1RDYEN  0x0       
 #define                  B1RDYPOL  0x20000    /* Bank 1 ARDY Polarity */
-#define                 nB1RDYPOL  0x0       
 #define                      B1TT  0xc0000    /* Bank 1 transition time */
 #define                      B1ST  0x300000   /* Bank 1 Setup time */
 #define                      B1HT  0xc00000   /* Bank 1 Hold time */
@@ -1788,18 +1700,14 @@
 /* Bit masks for EBIU_AMBCTL1 */
 
 #define                   B2RDYEN  0x1        /* Bank 2 ARDY Enable */
-#define                  nB2RDYEN  0x0       
 #define                  B2RDYPOL  0x2        /* Bank 2 ARDY Polarity */
-#define                 nB2RDYPOL  0x0       
 #define                      B2TT  0xc        /* Bank 2 transition time */
 #define                      B2ST  0x30       /* Bank 2 Setup time */
 #define                      B2HT  0xc0       /* Bank 2 Hold time */
 #define                     B2RAT  0xf00      /* Bank 2 Read access time */
 #define                     B2WAT  0xf000     /* Bank 2 write access time */
 #define                   B3RDYEN  0x10000    /* Bank 3 ARDY Enable */
-#define                  nB3RDYEN  0x0       
 #define                  B3RDYPOL  0x20000    /* Bank 3 ARDY Polarity */
-#define                 nB3RDYPOL  0x0       
 #define                      B3TT  0xc0000    /* Bank 3 transition time */
 #define                      B3ST  0x300000   /* Bank 3 Setup time */
 #define                      B3HT  0xc00000   /* Bank 3 Hold time */
@@ -1823,19 +1731,15 @@
 /* Bit masks for EBIU_FCTL */
 
 #define               TESTSETLOCK  0x1        /* Test set lock */
-#define              nTESTSETLOCK  0x0       
 #define                      BCLK  0x6        /* Burst clock frequency */
 #define                      PGWS  0x38       /* Page wait states */
 #define                      PGSZ  0x40       /* Page size */
-#define                     nPGSZ  0x0       
 #define                      RDDL  0x380      /* Read data delay */
 
 /* Bit masks for EBIU_ARBSTAT */
 
 #define                   ARBSTAT  0x1        /* Arbitration status */
-#define                  nARBSTAT  0x0       
 #define                    BGSTAT  0x2        /* Bus grant status */
-#define                   nBGSTAT  0x0       
 
 /* Bit masks for EBIU_DDRCTL0 */
 
@@ -1861,9 +1765,7 @@
 #define               BURSTLENGTH  0x7        /* Burst length */
 #define                CASLATENCY  0x70       /* CAS latency */
 #define                  DLLRESET  0x100      /* DLL Reset */
-#define                 nDLLRESET  0x0       
 #define                      REGE  0x1000     /* Register mode enable */
-#define                     nREGE  0x0       
 
 /* Bit masks for EBIU_DDRCTL3 */
 
@@ -1876,30 +1778,19 @@
 #define                DEB3_PFLEN  0x30       /* Pre fetch length for DEB3 accesses */
 #define          DEB_ARB_PRIORITY  0x700      /* Arbitration between DEB busses */
 #define               DEB1_URGENT  0x1000     /* DEB1 Urgent */
-#define              nDEB1_URGENT  0x0       
 #define               DEB2_URGENT  0x2000     /* DEB2 Urgent */
-#define              nDEB2_URGENT  0x0       
 #define               DEB3_URGENT  0x4000     /* DEB3 Urgent */
-#define              nDEB3_URGENT  0x0       
 
 /* Bit masks for EBIU_ERRMST */
 
 #define                DEB1_ERROR  0x1        /* DEB1 Error */
-#define               nDEB1_ERROR  0x0       
 #define                DEB2_ERROR  0x2        /* DEB2 Error */
-#define               nDEB2_ERROR  0x0       
 #define                DEB3_ERROR  0x4        /* DEB3 Error */
-#define               nDEB3_ERROR  0x0       
 #define                CORE_ERROR  0x8        /* Core error */
-#define               nCORE_ERROR  0x0       
 #define                DEB_MERROR  0x10       /* DEB1 Error (2nd) */
-#define               nDEB_MERROR  0x0       
 #define               DEB2_MERROR  0x20       /* DEB2 Error (2nd) */
-#define              nDEB2_MERROR  0x0       
 #define               DEB3_MERROR  0x40       /* DEB3 Error (2nd) */
-#define              nDEB3_MERROR  0x0       
 #define               CORE_MERROR  0x80       /* Core Error (2nd) */
-#define              nCORE_MERROR  0x0       
 
 /* Bit masks for EBIU_ERRADD */
 
@@ -1908,15 +1799,10 @@
 /* Bit masks for EBIU_RSTCTL */
 
 #define                 DDRSRESET  0x1        /* DDR soft reset */
-#define                nDDRSRESET  0x0       
 #define               PFTCHSRESET  0x4        /* DDR prefetch reset */
-#define              nPFTCHSRESET  0x0       
 #define                     SRREQ  0x8        /* Self-refresh request */
-#define                    nSRREQ  0x0       
 #define                     SRACK  0x10       /* Self-refresh acknowledge */
-#define                    nSRACK  0x0       
 #define                MDDRENABLE  0x20       /* Mobile DDR enable */
-#define               nMDDRENABLE  0x0       
 
 /* Bit masks for EBIU_DDRBRC0 */
 
@@ -2013,136 +1899,74 @@
 /* Bit masks for EBIU_DDRMCEN */
 
 #define                B0WCENABLE  0x1        /* Bank 0 write count enable */
-#define               nB0WCENABLE  0x0       
 #define                B1WCENABLE  0x2        /* Bank 1 write count enable */
-#define               nB1WCENABLE  0x0       
 #define                B2WCENABLE  0x4        /* Bank 2 write count enable */
-#define               nB2WCENABLE  0x0       
 #define                B3WCENABLE  0x8        /* Bank 3 write count enable */
-#define               nB3WCENABLE  0x0       
 #define                B4WCENABLE  0x10       /* Bank 4 write count enable */
-#define               nB4WCENABLE  0x0       
 #define                B5WCENABLE  0x20       /* Bank 5 write count enable */
-#define               nB5WCENABLE  0x0       
 #define                B6WCENABLE  0x40       /* Bank 6 write count enable */
-#define               nB6WCENABLE  0x0       
 #define                B7WCENABLE  0x80       /* Bank 7 write count enable */
-#define               nB7WCENABLE  0x0       
 #define                B0RCENABLE  0x100      /* Bank 0 read count enable */
-#define               nB0RCENABLE  0x0       
 #define                B1RCENABLE  0x200      /* Bank 1 read count enable */
-#define               nB1RCENABLE  0x0       
 #define                B2RCENABLE  0x400      /* Bank 2 read count enable */
-#define               nB2RCENABLE  0x0       
 #define                B3RCENABLE  0x800      /* Bank 3 read count enable */
-#define               nB3RCENABLE  0x0       
 #define                B4RCENABLE  0x1000     /* Bank 4 read count enable */
-#define               nB4RCENABLE  0x0       
 #define                B5RCENABLE  0x2000     /* Bank 5 read count enable */
-#define               nB5RCENABLE  0x0       
 #define                B6RCENABLE  0x4000     /* Bank 6 read count enable */
-#define               nB6RCENABLE  0x0       
 #define                B7RCENABLE  0x8000     /* Bank 7 read count enable */
-#define               nB7RCENABLE  0x0       
 #define             ROWACTCENABLE  0x10000    /* DDR Row activate count enable */
-#define            nROWACTCENABLE  0x0       
 #define                RWTCENABLE  0x20000    /* DDR R/W Turn around count enable */
-#define               nRWTCENABLE  0x0       
 #define                 ARCENABLE  0x40000    /* DDR Auto-refresh count enable */
-#define                nARCENABLE  0x0       
 #define                 GC0ENABLE  0x100000   /* DDR Grant count 0 enable */
-#define                nGC0ENABLE  0x0       
 #define                 GC1ENABLE  0x200000   /* DDR Grant count 1 enable */
-#define                nGC1ENABLE  0x0       
 #define                 GC2ENABLE  0x400000   /* DDR Grant count 2 enable */
-#define                nGC2ENABLE  0x0       
 #define                 GC3ENABLE  0x800000   /* DDR Grant count 3 enable */
-#define                nGC3ENABLE  0x0       
 #define                 GCCONTROL  0x3000000  /* DDR Grant Count Control */
 
 /* Bit masks for EBIU_DDRMCCL */
 
 #define                 CB0WCOUNT  0x1        /* Clear write count 0 */
-#define                nCB0WCOUNT  0x0       
 #define                 CB1WCOUNT  0x2        /* Clear write count 1 */
-#define                nCB1WCOUNT  0x0       
 #define                 CB2WCOUNT  0x4        /* Clear write count 2 */
-#define                nCB2WCOUNT  0x0       
 #define                 CB3WCOUNT  0x8        /* Clear write count 3 */
-#define                nCB3WCOUNT  0x0       
 #define                 CB4WCOUNT  0x10       /* Clear write count 4 */
-#define                nCB4WCOUNT  0x0       
 #define                 CB5WCOUNT  0x20       /* Clear write count 5 */
-#define                nCB5WCOUNT  0x0       
 #define                 CB6WCOUNT  0x40       /* Clear write count 6 */
-#define                nCB6WCOUNT  0x0       
 #define                 CB7WCOUNT  0x80       /* Clear write count 7 */
-#define                nCB7WCOUNT  0x0       
 #define                  CBRCOUNT  0x100      /* Clear read count 0 */
-#define                 nCBRCOUNT  0x0       
 #define                 CB1RCOUNT  0x200      /* Clear read count 1 */
-#define                nCB1RCOUNT  0x0       
 #define                 CB2RCOUNT  0x400      /* Clear read count 2 */
-#define                nCB2RCOUNT  0x0       
 #define                 CB3RCOUNT  0x800      /* Clear read count 3 */
-#define                nCB3RCOUNT  0x0       
 #define                 CB4RCOUNT  0x1000     /* Clear read count 4 */
-#define                nCB4RCOUNT  0x0       
 #define                 CB5RCOUNT  0x2000     /* Clear read count 5 */
-#define                nCB5RCOUNT  0x0       
 #define                 CB6RCOUNT  0x4000     /* Clear read count 6 */
-#define                nCB6RCOUNT  0x0       
 #define                 CB7RCOUNT  0x8000     /* Clear read count 7 */
-#define                nCB7RCOUNT  0x0       
 #define                  CRACOUNT  0x10000    /* Clear row activation count */
-#define                 nCRACOUNT  0x0       
 #define                CRWTACOUNT  0x20000    /* Clear R/W turn-around count */
-#define               nCRWTACOUNT  0x0       
 #define                  CARCOUNT  0x40000    /* Clear auto-refresh count */
-#define                 nCARCOUNT  0x0       
 #define                  CG0COUNT  0x100000   /* Clear grant count 0 */
-#define                 nCG0COUNT  0x0       
 #define                  CG1COUNT  0x200000   /* Clear grant count 1 */
-#define                 nCG1COUNT  0x0       
 #define                  CG2COUNT  0x400000   /* Clear grant count 2 */
-#define                 nCG2COUNT  0x0       
 #define                  CG3COUNT  0x800000   /* Clear grant count 3 */
-#define                 nCG3COUNT  0x0       
 
 /* Bit masks for (PORTx is PORTA - PORTJ) includes PORTx_FER, PORTx_SET, PORTx_CLEAR, PORTx_DIR_SET, PORTx_DIR_CLEAR, PORTx_INEN */
 
 #define                       Px0  0x1        /* GPIO 0 */
-#define                      nPx0  0x0       
 #define                       Px1  0x2        /* GPIO 1 */
-#define                      nPx1  0x0       
 #define                       Px2  0x4        /* GPIO 2 */
-#define                      nPx2  0x0       
 #define                       Px3  0x8        /* GPIO 3 */
-#define                      nPx3  0x0       
 #define                       Px4  0x10       /* GPIO 4 */
-#define                      nPx4  0x0       
 #define                       Px5  0x20       /* GPIO 5 */
-#define                      nPx5  0x0       
 #define                       Px6  0x40       /* GPIO 6 */
-#define                      nPx6  0x0       
 #define                       Px7  0x80       /* GPIO 7 */
-#define                      nPx7  0x0       
 #define                       Px8  0x100      /* GPIO 8 */
-#define                      nPx8  0x0       
 #define                       Px9  0x200      /* GPIO 9 */
-#define                      nPx9  0x0       
 #define                      Px10  0x400      /* GPIO 10 */
-#define                     nPx10  0x0       
 #define                      Px11  0x800      /* GPIO 11 */
-#define                     nPx11  0x0       
 #define                      Px12  0x1000     /* GPIO 12 */
-#define                     nPx12  0x0       
 #define                      Px13  0x2000     /* GPIO 13 */
-#define                     nPx13  0x0       
 #define                      Px14  0x4000     /* GPIO 14 */
-#define                     nPx14  0x0       
 #define                      Px15  0x8000     /* GPIO 15 */
-#define                     nPx15  0x0       
 
 /* Bit masks for PORTA_MUX - PORTJ_MUX */
 
@@ -2167,223 +1991,129 @@
 /* Bit masks for PINTx_MASK_SET/CLEAR, PINTx_REQUEST, PINTx_LATCH, PINTx_EDGE_SET/CLEAR, PINTx_INVERT_SET/CLEAR, PINTx_PINTSTATE */
 
 #define                       IB0  0x1        /* Interrupt Bit 0 */
-#define                      nIB0  0x0       
 #define                       IB1  0x2        /* Interrupt Bit 1 */
-#define                      nIB1  0x0       
 #define                       IB2  0x4        /* Interrupt Bit 2 */
-#define                      nIB2  0x0       
 #define                       IB3  0x8        /* Interrupt Bit 3 */
-#define                      nIB3  0x0       
 #define                       IB4  0x10       /* Interrupt Bit 4 */
-#define                      nIB4  0x0       
 #define                       IB5  0x20       /* Interrupt Bit 5 */
-#define                      nIB5  0x0       
 #define                       IB6  0x40       /* Interrupt Bit 6 */
-#define                      nIB6  0x0       
 #define                       IB7  0x80       /* Interrupt Bit 7 */
-#define                      nIB7  0x0       
 #define                       IB8  0x100      /* Interrupt Bit 8 */
-#define                      nIB8  0x0       
 #define                       IB9  0x200      /* Interrupt Bit 9 */
-#define                      nIB9  0x0       
 #define                      IB10  0x400      /* Interrupt Bit 10 */
-#define                     nIB10  0x0       
 #define                      IB11  0x800      /* Interrupt Bit 11 */
-#define                     nIB11  0x0       
 #define                      IB12  0x1000     /* Interrupt Bit 12 */
-#define                     nIB12  0x0       
 #define                      IB13  0x2000     /* Interrupt Bit 13 */
-#define                     nIB13  0x0       
 #define                      IB14  0x4000     /* Interrupt Bit 14 */
-#define                     nIB14  0x0       
 #define                      IB15  0x8000     /* Interrupt Bit 15 */
-#define                     nIB15  0x0       
 
 /* Bit masks for TIMERx_CONFIG */
 
 #define                     TMODE  0x3        /* Timer Mode */
 #define                  PULSE_HI  0x4        /* Pulse Polarity */
-#define                 nPULSE_HI  0x0       
 #define                PERIOD_CNT  0x8        /* Period Count */
-#define               nPERIOD_CNT  0x0       
 #define                   IRQ_ENA  0x10       /* Interrupt Request Enable */
-#define                  nIRQ_ENA  0x0       
 #define                   TIN_SEL  0x20       /* Timer Input Select */
-#define                  nTIN_SEL  0x0       
 #define                   OUT_DIS  0x40       /* Output Pad Disable */
-#define                  nOUT_DIS  0x0       
 #define                   CLK_SEL  0x80       /* Timer Clock Select */
-#define                  nCLK_SEL  0x0       
 #define                 TOGGLE_HI  0x100      /* Toggle Mode */
-#define                nTOGGLE_HI  0x0       
 #define                   EMU_RUN  0x200      /* Emulation Behavior Select */
-#define                  nEMU_RUN  0x0       
 #define                   ERR_TYP  0xc000     /* Error Type */
 
 /* Bit masks for TIMER_ENABLE0 */
 
 #define                    TIMEN0  0x1        /* Timer 0 Enable */
-#define                   nTIMEN0  0x0       
 #define                    TIMEN1  0x2        /* Timer 1 Enable */
-#define                   nTIMEN1  0x0       
 #define                    TIMEN2  0x4        /* Timer 2 Enable */
-#define                   nTIMEN2  0x0       
 #define                    TIMEN3  0x8        /* Timer 3 Enable */
-#define                   nTIMEN3  0x0       
 #define                    TIMEN4  0x10       /* Timer 4 Enable */
-#define                   nTIMEN4  0x0       
 #define                    TIMEN5  0x20       /* Timer 5 Enable */
-#define                   nTIMEN5  0x0       
 #define                    TIMEN6  0x40       /* Timer 6 Enable */
-#define                   nTIMEN6  0x0       
 #define                    TIMEN7  0x80       /* Timer 7 Enable */
-#define                   nTIMEN7  0x0       
 
 /* Bit masks for TIMER_DISABLE0 */
 
 #define                   TIMDIS0  0x1        /* Timer 0 Disable */
-#define                  nTIMDIS0  0x0       
 #define                   TIMDIS1  0x2        /* Timer 1 Disable */
-#define                  nTIMDIS1  0x0       
 #define                   TIMDIS2  0x4        /* Timer 2 Disable */
-#define                  nTIMDIS2  0x0       
 #define                   TIMDIS3  0x8        /* Timer 3 Disable */
-#define                  nTIMDIS3  0x0       
 #define                   TIMDIS4  0x10       /* Timer 4 Disable */
-#define                  nTIMDIS4  0x0       
 #define                   TIMDIS5  0x20       /* Timer 5 Disable */
-#define                  nTIMDIS5  0x0       
 #define                   TIMDIS6  0x40       /* Timer 6 Disable */
-#define                  nTIMDIS6  0x0       
 #define                   TIMDIS7  0x80       /* Timer 7 Disable */
-#define                  nTIMDIS7  0x0       
 
 /* Bit masks for TIMER_STATUS0 */
 
 #define                    TIMIL0  0x1        /* Timer 0 Interrupt */
-#define                   nTIMIL0  0x0       
 #define                    TIMIL1  0x2        /* Timer 1 Interrupt */
-#define                   nTIMIL1  0x0       
 #define                    TIMIL2  0x4        /* Timer 2 Interrupt */
-#define                   nTIMIL2  0x0       
 #define                    TIMIL3  0x8        /* Timer 3 Interrupt */
-#define                   nTIMIL3  0x0       
 #define                 TOVF_ERR0  0x10       /* Timer 0 Counter Overflow */
-#define                nTOVF_ERR0  0x0       
 #define                 TOVF_ERR1  0x20       /* Timer 1 Counter Overflow */
-#define                nTOVF_ERR1  0x0       
 #define                 TOVF_ERR2  0x40       /* Timer 2 Counter Overflow */
-#define                nTOVF_ERR2  0x0       
 #define                 TOVF_ERR3  0x80       /* Timer 3 Counter Overflow */
-#define                nTOVF_ERR3  0x0       
 #define                     TRUN0  0x1000     /* Timer 0 Slave Enable Status */
-#define                    nTRUN0  0x0       
 #define                     TRUN1  0x2000     /* Timer 1 Slave Enable Status */
-#define                    nTRUN1  0x0       
 #define                     TRUN2  0x4000     /* Timer 2 Slave Enable Status */
-#define                    nTRUN2  0x0       
 #define                     TRUN3  0x8000     /* Timer 3 Slave Enable Status */
-#define                    nTRUN3  0x0       
 #define                    TIMIL4  0x10000    /* Timer 4 Interrupt */
-#define                   nTIMIL4  0x0       
 #define                    TIMIL5  0x20000    /* Timer 5 Interrupt */
-#define                   nTIMIL5  0x0       
 #define                    TIMIL6  0x40000    /* Timer 6 Interrupt */
-#define                   nTIMIL6  0x0       
 #define                    TIMIL7  0x80000    /* Timer 7 Interrupt */
-#define                   nTIMIL7  0x0       
 #define                 TOVF_ERR4  0x100000   /* Timer 4 Counter Overflow */
-#define                nTOVF_ERR4  0x0       
 #define                 TOVF_ERR5  0x200000   /* Timer 5 Counter Overflow */
-#define                nTOVF_ERR5  0x0       
 #define                 TOVF_ERR6  0x400000   /* Timer 6 Counter Overflow */
-#define                nTOVF_ERR6  0x0       
 #define                 TOVF_ERR7  0x800000   /* Timer 7 Counter Overflow */
-#define                nTOVF_ERR7  0x0       
 #define                     TRUN4  0x10000000 /* Timer 4 Slave Enable Status */
-#define                    nTRUN4  0x0       
 #define                     TRUN5  0x20000000 /* Timer 5 Slave Enable Status */
-#define                    nTRUN5  0x0       
 #define                     TRUN6  0x40000000 /* Timer 6 Slave Enable Status */
-#define                    nTRUN6  0x0       
 #define                     TRUN7  0x80000000 /* Timer 7 Slave Enable Status */
-#define                    nTRUN7  0x0       
 
 /* Bit masks for WDOG_CTL */
 
 #define                      WDEV  0x6        /* Watchdog Event */
 #define                      WDEN  0xff0      /* Watchdog Enable */
 #define                      WDRO  0x8000     /* Watchdog Rolled Over */
-#define                     nWDRO  0x0       
 
 /* Bit masks for CNT_CONFIG */
 
 #define                      CNTE  0x1        /* Counter Enable */
-#define                     nCNTE  0x0       
 #define                      DEBE  0x2        /* Debounce Enable */
-#define                     nDEBE  0x0       
 #define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
-#define                   nCDGINV  0x0       
 #define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
-#define                   nCUDINV  0x0       
 #define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
-#define                   nCZMINV  0x0       
 #define                   CNTMODE  0x700      /* Counter Operating Mode */
 #define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
-#define                     nZMZC  0x0       
 #define                   BNDMODE  0x3000     /* Boundary register Mode */
 #define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
-#define                   nINPDIS  0x0       
 
 /* Bit masks for CNT_IMASK */
 
 #define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
-#define                     nICIE  0x0       
 #define                      UCIE  0x2        /* Up count Interrupt Enable */
-#define                     nUCIE  0x0       
 #define                      DCIE  0x4        /* Down count Interrupt Enable */
-#define                     nDCIE  0x0       
 #define                    MINCIE  0x8        /* Min Count Interrupt Enable */
-#define                   nMINCIE  0x0       
 #define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
-#define                   nMAXCIE  0x0       
 #define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
-#define                  nCOV31IE  0x0       
 #define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
-#define                  nCOV15IE  0x0       
 #define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
-#define                  nCZEROIE  0x0       
 #define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
-#define                    nCZMIE  0x0       
 #define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
-#define                   nCZMEIE  0x0       
 #define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
-#define                   nCZMZIE  0x0       
 
 /* Bit masks for CNT_STATUS */
 
 #define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
-#define                     nICII  0x0       
 #define                      UCII  0x2        /* Up count Interrupt Identifier */
-#define                     nUCII  0x0       
 #define                      DCII  0x4        /* Down count Interrupt Identifier */
-#define                     nDCII  0x0       
 #define                    MINCII  0x8        /* Min Count Interrupt Identifier */
-#define                   nMINCII  0x0       
 #define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
-#define                   nMAXCII  0x0       
 #define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
-#define                  nCOV31II  0x0       
 #define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
-#define                  nCOV15II  0x0       
 #define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
-#define                  nCZEROII  0x0       
 #define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
-#define                    nCZMII  0x0       
 #define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
-#define                   nCZMEII  0x0       
 #define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
-#define                   nCZMZII  0x0       
 
 /* Bit masks for CNT_COMMAND */
 
@@ -2391,7 +2121,6 @@
 #define                    W1LMIN  0xf0       /* Load Min Register */
 #define                    W1LMAX  0xf00      /* Load Max Register */
 #define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
-#define                 nW1ZMONCE  0x0       
 
 /* Bit masks for CNT_DEBOUNCE */
 
@@ -2407,42 +2136,25 @@
 /* Bit masks for RTC_ICTL */
 
 #define STOPWATCH_INTERRUPT_ENABLE  0x1        /* Stopwatch Interrupt Enable */
-#define nSTOPWATCH_INTERRUPT_ENABLE  0x0       
 #define    ALARM_INTERRUPT_ENABLE  0x2        /* Alarm Interrupt Enable */
-#define   nALARM_INTERRUPT_ENABLE  0x0       
 #define  SECONDS_INTERRUPT_ENABLE  0x4        /* Seconds Interrupt Enable */
-#define nSECONDS_INTERRUPT_ENABLE  0x0       
 #define  MINUTES_INTERRUPT_ENABLE  0x8        /* Minutes Interrupt Enable */
-#define nMINUTES_INTERRUPT_ENABLE  0x0       
 #define    HOURS_INTERRUPT_ENABLE  0x10       /* Hours Interrupt Enable */
-#define   nHOURS_INTERRUPT_ENABLE  0x0       
 #define TWENTY_FOUR_HOURS_INTERRUPT_ENABLE  0x20       /* 24 Hours Interrupt Enable */
-#define nTWENTY_FOUR_HOURS_INTERRUPT_ENABLE  0x0       
 #define DAY_ALARM_INTERRUPT_ENABLE  0x40       /* Day Alarm Interrupt Enable */
-#define nDAY_ALARM_INTERRUPT_ENABLE  0x0       
 #define WRITE_COMPLETE_INTERRUPT_ENABLE  0x8000     /* Write Complete Interrupt Enable */
-#define nWRITE_COMPLETE_INTERRUPT_ENABLE  0x0       
 
 /* Bit masks for RTC_ISTAT */
 
 #define      STOPWATCH_EVENT_FLAG  0x1        /* Stopwatch Event Flag */
-#define     nSTOPWATCH_EVENT_FLAG  0x0       
 #define          ALARM_EVENT_FLAG  0x2        /* Alarm Event Flag */
-#define         nALARM_EVENT_FLAG  0x0       
 #define        SECONDS_EVENT_FLAG  0x4        /* Seconds Event Flag */
-#define       nSECONDS_EVENT_FLAG  0x0       
 #define        MINUTES_EVENT_FLAG  0x8        /* Minutes Event Flag */
-#define       nMINUTES_EVENT_FLAG  0x0       
 #define          HOURS_EVENT_FLAG  0x10       /* Hours Event Flag */
-#define         nHOURS_EVENT_FLAG  0x0       
 #define TWENTY_FOUR_HOURS_EVENT_FLAG  0x20       /* 24 Hours Event Flag */
-#define nTWENTY_FOUR_HOURS_EVENT_FLAG  0x0       
 #define      DAY_ALARM_EVENT_FLAG  0x40       /* Day Alarm Event Flag */
-#define     nDAY_ALARM_EVENT_FLAG  0x0       
 #define     WRITE_PENDING__STATUS  0x4000     /* Write Pending  Status */
-#define    nWRITE_PENDING__STATUS  0x0       
 #define            WRITE_COMPLETE  0x8000     /* Write Complete */
-#define           nWRITE_COMPLETE  0x0       
 
 /* Bit masks for RTC_SWCNT */
 
@@ -2458,21 +2170,15 @@
 /* Bit masks for RTC_PREN */
 
 #define                      PREN  0x1        /* Prescaler Enable */
-#define                     nPREN  0x0       
 
 /* Bit masks for OTP_CONTROL */
 
 #define                FUSE_FADDR  0x1ff      /* OTP/Fuse Address */
 #define                      FIEN  0x800      /* OTP/Fuse Interrupt Enable */
-#define                     nFIEN  0x0       
 #define                  FTESTDEC  0x1000     /* OTP/Fuse Test Decoder */
-#define                 nFTESTDEC  0x0       
 #define                   FWRTEST  0x2000     /* OTP/Fuse Write Test */
-#define                  nFWRTEST  0x0       
 #define                     FRDEN  0x4000     /* OTP/Fuse Read Enable */
-#define                    nFRDEN  0x0       
 #define                     FWREN  0x8000     /* OTP/Fuse Write Enable */
-#define                    nFWREN  0x0       
 
 /* Bit masks for OTP_BEN */
 
@@ -2481,15 +2187,10 @@
 /* Bit masks for OTP_STATUS */
 
 #define                     FCOMP  0x1        /* OTP/Fuse Access Complete */
-#define                    nFCOMP  0x0       
 #define                    FERROR  0x2        /* OTP/Fuse Access Error */
-#define                   nFERROR  0x0       
 #define                  MMRGLOAD  0x10       /* Memory Mapped Register Gasket Load */
-#define                 nMMRGLOAD  0x0       
 #define                  MMRGLOCK  0x20       /* Memory Mapped Register Gasket Lock */
-#define                 nMMRGLOCK  0x0       
 #define                    FPGMEN  0x40       /* OTP/Fuse Program Enable */
-#define                   nFPGMEN  0x0       
 
 /* Bit masks for OTP_TIMING */
 
@@ -2503,42 +2204,29 @@
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
-#define                  nEMUDABL  0x0       
 #define                   RSTDABL  0x2        /* Reset Disable */
-#define                  nRSTDABL  0x0       
 #define                   L1IDABL  0x1c       /* L1 Instruction Memory Disable. */
 #define                  L1DADABL  0xe0       /* L1 Data Bank A Memory Disable. */
 #define                  L1DBDABL  0x700      /* L1 Data Bank B Memory Disable. */
 #define                   DMA0OVR  0x800      /* DMA0 Memory Access Override */
-#define                  nDMA0OVR  0x0       
 #define                   DMA1OVR  0x1000     /* DMA1 Memory Access Override */
-#define                  nDMA1OVR  0x0       
 #define                    EMUOVR  0x4000     /* Emulation Override */
-#define                   nEMUOVR  0x0       
 #define                    OTPSEN  0x8000     /* OTP Secrets Enable. */
-#define                   nOTPSEN  0x0       
 #define                    L2DABL  0x70000    /* L2 Memory Disable. */
 
 /* Bit masks for SECURE_CONTROL */
 
 #define                   SECURE0  0x1        /* SECURE 0 */
-#define                  nSECURE0  0x0       
 #define                   SECURE1  0x2        /* SECURE 1 */
-#define                  nSECURE1  0x0       
 #define                   SECURE2  0x4        /* SECURE 2 */
-#define                  nSECURE2  0x0       
 #define                   SECURE3  0x8        /* SECURE 3 */
-#define                  nSECURE3  0x0       
 
 /* Bit masks for SECURE_STATUS */
 
 #define                   SECMODE  0x3        /* Secured Mode Control State */
 #define                       NMI  0x4        /* Non Maskable Interrupt */
-#define                      nNMI  0x0       
 #define                   AFVALID  0x8        /* Authentication Firmware Valid */
-#define                  nAFVALID  0x0       
 #define                    AFEXIT  0x10       /* Authentication Firmware Exit */
-#define                   nAFEXIT  0x0       
 #define                   SECSTAT  0xe0       /* Secure Status */
 
 /* Bit masks for PLL_DIV */
@@ -2550,42 +2238,25 @@
 
 #define                      MSEL  0x7e00     /* Multiplier Select */
 #define                    BYPASS  0x100      /* PLL Bypass Enable */
-#define                   nBYPASS  0x0       
 #define              OUTPUT_DELAY  0x80       /* External Memory Output Delay Enable */
-#define             nOUTPUT_DELAY  0x0       
 #define               INPUT_DELAY  0x40       /* External Memory Input Delay Enable */
-#define              nINPUT_DELAY  0x0       
 #define                      PDWN  0x20       /* Power Down */
-#define                     nPDWN  0x0       
 #define                    STOPCK  0x8        /* Stop Clock */
-#define                   nSTOPCK  0x0       
 #define                   PLL_OFF  0x2        /* Disable PLL */
-#define                  nPLL_OFF  0x0       
 #define                        DF  0x1        /* Divide Frequency */
-#define                       nDF  0x0       
 
 /* Bit masks for PLL_STAT */
 
 #define                PLL_LOCKED  0x20       /* PLL Locked Status */
-#define               nPLL_LOCKED  0x0       
 #define        ACTIVE_PLLDISABLED  0x4        /* Active Mode With PLL Disabled */
-#define       nACTIVE_PLLDISABLED  0x0       
 #define                   FULL_ON  0x2        /* Full-On Mode */
-#define                  nFULL_ON  0x0       
 #define         ACTIVE_PLLENABLED  0x1        /* Active Mode With PLL Enabled */
-#define        nACTIVE_PLLENABLED  0x0       
 #define                     RTCWS  0x400      /* RTC/Reset Wake-Up Status */
-#define                    nRTCWS  0x0       
 #define                     CANWS  0x800      /* CAN Wake-Up Status */
-#define                    nCANWS  0x0       
 #define                     USBWS  0x2000     /* USB Wake-Up Status */
-#define                    nUSBWS  0x0       
 #define                    KPADWS  0x4000     /* Keypad Wake-Up Status */
-#define                   nKPADWS  0x0       
 #define                     ROTWS  0x8000     /* Rotary Wake-Up Status */
-#define                    nROTWS  0x0       
 #define                      GPWS  0x1000     /* General-Purpose Wake-Up Status */
-#define                     nGPWS  0x0       
 
 /* Bit masks for VR_CTL */
 
@@ -2593,79 +2264,52 @@
 #define                      GAIN  0xc        /* Voltage Output Level Gain */
 #define                      VLEV  0xf0       /* Internal Voltage Level */
 #define                   SCKELOW  0x8000     /* Drive SCKE Low During Reset Enable */
-#define                  nSCKELOW  0x0       
 #define                      WAKE  0x100      /* RTC/Reset Wake-Up Enable */
-#define                     nWAKE  0x0       
 #define                     CANWE  0x200      /* CAN0/1 Wake-Up Enable */
-#define                    nCANWE  0x0       
 #define                      GPWE  0x400      /* General-Purpose Wake-Up Enable */
-#define                     nGPWE  0x0       
 #define                     USBWE  0x800      /* USB Wake-Up Enable */
-#define                    nUSBWE  0x0       
 #define                    KPADWE  0x1000     /* Keypad Wake-Up Enable */
-#define                   nKPADWE  0x0       
 #define                     ROTWE  0x2000     /* Rotary Wake-Up Enable */
-#define                    nROTWE  0x0       
 
 /* Bit masks for NFC_CTL */
 
 #define                    WR_DLY  0xf        /* Write Strobe Delay */
 #define                    RD_DLY  0xf0       /* Read Strobe Delay */
 #define                    NWIDTH  0x100      /* NAND Data Width */
-#define                   nNWIDTH  0x0       
 #define                   PG_SIZE  0x200      /* Page Size */
-#define                  nPG_SIZE  0x0       
 
 /* Bit masks for NFC_STAT */
 
 #define                     NBUSY  0x1        /* Not Busy */
-#define                    nNBUSY  0x0       
 #define                   WB_FULL  0x2        /* Write Buffer Full */
-#define                  nWB_FULL  0x0       
 #define                PG_WR_STAT  0x4        /* Page Write Pending */
-#define               nPG_WR_STAT  0x0       
 #define                PG_RD_STAT  0x8        /* Page Read Pending */
-#define               nPG_RD_STAT  0x0       
 #define                  WB_EMPTY  0x10       /* Write Buffer Empty */
-#define                 nWB_EMPTY  0x0       
 
 /* Bit masks for NFC_IRQSTAT */
 
 #define                  NBUSYIRQ  0x1        /* Not Busy IRQ */
-#define                 nNBUSYIRQ  0x0       
 #define                    WB_OVF  0x2        /* Write Buffer Overflow */
-#define                   nWB_OVF  0x0       
 #define                   WB_EDGE  0x4        /* Write Buffer Edge Detect */
-#define                  nWB_EDGE  0x0       
 #define                    RD_RDY  0x8        /* Read Data Ready */
-#define                   nRD_RDY  0x0       
 #define                   WR_DONE  0x10       /* Page Write Done */
-#define                  nWR_DONE  0x0       
 
 /* Bit masks for NFC_IRQMASK */
 
 #define              MASK_BUSYIRQ  0x1        /* Mask Not Busy IRQ */
-#define             nMASK_BUSYIRQ  0x0       
 #define                MASK_WBOVF  0x2        /* Mask Write Buffer Overflow */
-#define               nMASK_WBOVF  0x0       
 #define              MASK_WBEMPTY  0x4        /* Mask Write Buffer Empty */
-#define             nMASK_WBEMPTY  0x0       
 #define                MASK_RDRDY  0x8        /* Mask Read Data Ready */
-#define               nMASK_RDRDY  0x0       
 #define               MASK_WRDONE  0x10       /* Mask Write Done */
-#define              nMASK_WRDONE  0x0       
 
 /* Bit masks for NFC_RST */
 
 #define                   ECC_RST  0x1        /* ECC (and NFC counters) Reset */
-#define                  nECC_RST  0x0       
 
 /* Bit masks for NFC_PGCTL */
 
 #define               PG_RD_START  0x1        /* Page Read Start */
-#define              nPG_RD_START  0x0       
 #define               PG_WR_START  0x2        /* Page Write Start */
-#define              nPG_WR_START  0x0       
 
 /* Bit masks for NFC_ECC0 */
 
@@ -2690,56 +2334,34 @@
 /* Bit masks for CAN0_CONTROL */
 
 #define                       SRS  0x1        /* Software Reset */
-#define                      nSRS  0x0       
 #define                       DNM  0x2        /* DeviceNet Mode */
-#define                      nDNM  0x0       
 #define                       ABO  0x4        /* Auto Bus On */
-#define                      nABO  0x0       
 #define                       WBA  0x10       /* Wakeup On CAN Bus Activity */
-#define                      nWBA  0x0       
 #define                       SMR  0x20       /* Sleep Mode Request */
-#define                      nSMR  0x0       
 #define                       CSR  0x40       /* CAN Suspend Mode Request */
-#define                      nCSR  0x0       
 #define                       CCR  0x80       /* CAN Configuration Mode Request */
-#define                      nCCR  0x0       
 
 /* Bit masks for CAN0_STATUS */
 
 #define                        WT  0x1        /* CAN Transmit Warning Flag */
-#define                       nWT  0x0       
 #define                        WR  0x2        /* CAN Receive Warning Flag */
-#define                       nWR  0x0       
 #define                        EP  0x4        /* CAN Error Passive Mode */
-#define                       nEP  0x0       
 #define                       EBO  0x8        /* CAN Error Bus Off Mode */
-#define                      nEBO  0x0       
 #define                       CSA  0x40       /* CAN Suspend Mode Acknowledge */
-#define                      nCSA  0x0       
 #define                       CCA  0x80       /* CAN Configuration Mode Acknowledge */
-#define                      nCCA  0x0       
 #define                     MBPTR  0x1f00     /* Mailbox Pointer */
 #define                       TRM  0x4000     /* Transmit Mode Status */
-#define                      nTRM  0x0       
 #define                       REC  0x8000     /* Receive Mode Status */
-#define                      nREC  0x0       
 
 /* Bit masks for CAN0_DEBUG */
 
 #define                       DEC  0x1        /* Disable Transmit/Receive Error Counters */
-#define                      nDEC  0x0       
 #define                       DRI  0x2        /* Disable CANRX Input Pin */
-#define                      nDRI  0x0       
 #define                       DTO  0x4        /* Disable CANTX Output Pin */
-#define                      nDTO  0x0       
 #define                       DIL  0x8        /* Disable Internal Loop */
-#define                      nDIL  0x0       
 #define                       MAA  0x10       /* Mode Auto-Acknowledge */
-#define                      nMAA  0x0       
 #define                       MRB  0x20       /* Mode Read Back */
-#define                      nMRB  0x0       
 #define                       CDE  0x8000     /* CAN Debug Mode Enable */
-#define                      nCDE  0x0       
 
 /* Bit masks for CAN0_CLOCK */
 
@@ -2749,111 +2371,69 @@
 
 #define                       SJW  0x300      /* Synchronization Jump Width */
 #define                       SAM  0x80       /* Sampling */
-#define                      nSAM  0x0       
 #define                     TSEG2  0x70       /* Time Segment 2 */
 #define                     TSEG1  0xf        /* Time Segment 1 */
 
 /* Bit masks for CAN0_INTR */
 
 #define                     CANRX  0x80       /* Serial Input From Transceiver */
-#define                    nCANRX  0x0       
 #define                     CANTX  0x40       /* Serial Output To Transceiver */
-#define                    nCANTX  0x0       
 #define                     SMACK  0x8        /* Sleep Mode Acknowledge */
-#define                    nSMACK  0x0       
 #define                      GIRQ  0x4        /* Global Interrupt Request Status */
-#define                     nGIRQ  0x0       
 #define                    MBTIRQ  0x2        /* Mailbox Transmit Interrupt Request */
-#define                   nMBTIRQ  0x0       
 #define                    MBRIRQ  0x1        /* Mailbox Receive Interrupt Request */
-#define                   nMBRIRQ  0x0       
 
 /* Bit masks for CAN0_GIM */
 
 #define                     EWTIM  0x1        /* Error Warning Transmit Interrupt Mask */
-#define                    nEWTIM  0x0       
 #define                     EWRIM  0x2        /* Error Warning Receive Interrupt Mask */
-#define                    nEWRIM  0x0       
 #define                      EPIM  0x4        /* Error Passive Interrupt Mask */
-#define                     nEPIM  0x0       
 #define                      BOIM  0x8        /* Bus Off Interrupt Mask */
-#define                     nBOIM  0x0       
 #define                      WUIM  0x10       /* Wakeup Interrupt Mask */
-#define                     nWUIM  0x0       
 #define                     UIAIM  0x20       /* Unimplemented Address Interrupt Mask */
-#define                    nUIAIM  0x0       
 #define                      AAIM  0x40       /* Abort Acknowledge Interrupt Mask */
-#define                     nAAIM  0x0       
 #define                     RMLIM  0x80       /* Receive Message Lost Interrupt Mask */
-#define                    nRMLIM  0x0       
 #define                     UCEIM  0x100      /* Universal Counter Exceeded Interrupt Mask */
-#define                    nUCEIM  0x0       
 #define                      ADIM  0x400      /* Access Denied Interrupt Mask */
-#define                     nADIM  0x0       
 
 /* Bit masks for CAN0_GIS */
 
 #define                     EWTIS  0x1        /* Error Warning Transmit Interrupt Status */
-#define                    nEWTIS  0x0       
 #define                     EWRIS  0x2        /* Error Warning Receive Interrupt Status */
-#define                    nEWRIS  0x0       
 #define                      EPIS  0x4        /* Error Passive Interrupt Status */
-#define                     nEPIS  0x0       
 #define                      BOIS  0x8        /* Bus Off Interrupt Status */
-#define                     nBOIS  0x0       
 #define                      WUIS  0x10       /* Wakeup Interrupt Status */
-#define                     nWUIS  0x0       
 #define                     UIAIS  0x20       /* Unimplemented Address Interrupt Status */
-#define                    nUIAIS  0x0       
 #define                      AAIS  0x40       /* Abort Acknowledge Interrupt Status */
-#define                     nAAIS  0x0       
 #define                     RMLIS  0x80       /* Receive Message Lost Interrupt Status */
-#define                    nRMLIS  0x0       
 #define                     UCEIS  0x100      /* Universal Counter Exceeded Interrupt Status */
-#define                    nUCEIS  0x0       
 #define                      ADIS  0x400      /* Access Denied Interrupt Status */
-#define                     nADIS  0x0       
 
 /* Bit masks for CAN0_GIF */
 
 #define                     EWTIF  0x1        /* Error Warning Transmit Interrupt Flag */
-#define                    nEWTIF  0x0       
 #define                     EWRIF  0x2        /* Error Warning Receive Interrupt Flag */
-#define                    nEWRIF  0x0       
 #define                      EPIF  0x4        /* Error Passive Interrupt Flag */
-#define                     nEPIF  0x0       
 #define                      BOIF  0x8        /* Bus Off Interrupt Flag */
-#define                     nBOIF  0x0       
 #define                      WUIF  0x10       /* Wakeup Interrupt Flag */
-#define                     nWUIF  0x0       
 #define                     UIAIF  0x20       /* Unimplemented Address Interrupt Flag */
-#define                    nUIAIF  0x0       
 #define                      AAIF  0x40       /* Abort Acknowledge Interrupt Flag */
-#define                     nAAIF  0x0       
 #define                     RMLIF  0x80       /* Receive Message Lost Interrupt Flag */
-#define                    nRMLIF  0x0       
 #define                     UCEIF  0x100      /* Universal Counter Exceeded Interrupt Flag */
-#define                    nUCEIF  0x0       
 #define                      ADIF  0x400      /* Access Denied Interrupt Flag */
-#define                     nADIF  0x0       
 
 /* Bit masks for CAN0_MBTD */
 
 #define                       TDR  0x80       /* Temporary Disable Request */
-#define                      nTDR  0x0       
 #define                       TDA  0x40       /* Temporary Disable Acknowledge */
-#define                      nTDA  0x0       
 #define                     TDPTR  0x1f       /* Temporary Disable Pointer */
 
 /* Bit masks for CAN0_UCCNF */
 
 #define                     UCCNF  0xf        /* Universal Counter Configuration */
 #define                      UCRC  0x20       /* Universal Counter Reload/Clear */
-#define                     nUCRC  0x0       
 #define                      UCCT  0x40       /* Universal Counter CAN Trigger */
-#define                     nUCCT  0x0       
 #define                       UCE  0x80       /* Universal Counter Enable */
-#define                      nUCE  0x0       
 
 /* Bit masks for CAN0_UCCNT */
 
@@ -2871,17 +2451,11 @@
 /* Bit masks for CAN0_ESR */
 
 #define                       FER  0x80       /* Form Error */
-#define                      nFER  0x0       
 #define                       BEF  0x40       /* Bit Error Flag */
-#define                      nBEF  0x0       
 #define                       SA0  0x20       /* Stuck At Dominant */
-#define                      nSA0  0x0       
 #define                      CRCE  0x10       /* CRC Error */
-#define                     nCRCE  0x0       
 #define                       SER  0x8        /* Stuff Bit Error */
-#define                      nSER  0x0       
 #define                      ACKE  0x4        /* Acknowledge Error */
-#define                     nACKE  0x0       
 
 /* Bit masks for CAN0_EWR */
 
@@ -2891,11 +2465,8 @@
 /* Bit masks for CAN0_AMxx_H */
 
 #define                       FDF  0x8000     /* Filter On Data Field */
-#define                      nFDF  0x0       
 #define                       FMD  0x4000     /* Full Mask Data */
-#define                      nFMD  0x0       
 #define                     AMIDE  0x2000     /* Acceptance Mask Identifier Extension */
-#define                    nAMIDE  0x0       
 #define                    BASEID  0x1ffc     /* Base Identifier */
 #define                  EXTID_HI  0x3        /* Extended Identifier High Bits */
 
@@ -2907,11 +2478,8 @@
 /* Bit masks for CAN0_MBxx_ID1 */
 
 #define                       AME  0x8000     /* Acceptance Mask Enable */
-#define                      nAME  0x0       
 #define                       RTR  0x4000     /* Remote Transmission Request */
-#define                      nRTR  0x0       
 #define                       IDE  0x2000     /* Identifier Extension */
-#define                      nIDE  0x0       
 #define                    BASEID  0x1ffc     /* Base Identifier */
 #define                  EXTID_HI  0x3        /* Extended Identifier High Bits */
 
@@ -2951,977 +2519,534 @@
 /* Bit masks for CAN0_MC1 */
 
 #define                       MC0  0x1        /* Mailbox 0 Enable */
-#define                      nMC0  0x0       
 #define                       MC1  0x2        /* Mailbox 1 Enable */
-#define                      nMC1  0x0       
 #define                       MC2  0x4        /* Mailbox 2 Enable */
-#define                      nMC2  0x0       
 #define                       MC3  0x8        /* Mailbox 3 Enable */
-#define                      nMC3  0x0       
 #define                       MC4  0x10       /* Mailbox 4 Enable */
-#define                      nMC4  0x0       
 #define                       MC5  0x20       /* Mailbox 5 Enable */
-#define                      nMC5  0x0       
 #define                       MC6  0x40       /* Mailbox 6 Enable */
-#define                      nMC6  0x0       
 #define                       MC7  0x80       /* Mailbox 7 Enable */
-#define                      nMC7  0x0       
 #define                       MC8  0x100      /* Mailbox 8 Enable */
-#define                      nMC8  0x0       
 #define                       MC9  0x200      /* Mailbox 9 Enable */
-#define                      nMC9  0x0       
 #define                      MC10  0x400      /* Mailbox 10 Enable */
-#define                     nMC10  0x0       
 #define                      MC11  0x800      /* Mailbox 11 Enable */
-#define                     nMC11  0x0       
 #define                      MC12  0x1000     /* Mailbox 12 Enable */
-#define                     nMC12  0x0       
 #define                      MC13  0x2000     /* Mailbox 13 Enable */
-#define                     nMC13  0x0       
 #define                      MC14  0x4000     /* Mailbox 14 Enable */
-#define                     nMC14  0x0       
 #define                      MC15  0x8000     /* Mailbox 15 Enable */
-#define                     nMC15  0x0       
 
 /* Bit masks for CAN0_MC2 */
 
 #define                      MC16  0x1        /* Mailbox 16 Enable */
-#define                     nMC16  0x0       
 #define                      MC17  0x2        /* Mailbox 17 Enable */
-#define                     nMC17  0x0       
 #define                      MC18  0x4        /* Mailbox 18 Enable */
-#define                     nMC18  0x0       
 #define                      MC19  0x8        /* Mailbox 19 Enable */
-#define                     nMC19  0x0       
 #define                      MC20  0x10       /* Mailbox 20 Enable */
-#define                     nMC20  0x0       
 #define                      MC21  0x20       /* Mailbox 21 Enable */
-#define                     nMC21  0x0       
 #define                      MC22  0x40       /* Mailbox 22 Enable */
-#define                     nMC22  0x0       
 #define                      MC23  0x80       /* Mailbox 23 Enable */
-#define                     nMC23  0x0       
 #define                      MC24  0x100      /* Mailbox 24 Enable */
-#define                     nMC24  0x0       
 #define                      MC25  0x200      /* Mailbox 25 Enable */
-#define                     nMC25  0x0       
 #define                      MC26  0x400      /* Mailbox 26 Enable */
-#define                     nMC26  0x0       
 #define                      MC27  0x800      /* Mailbox 27 Enable */
-#define                     nMC27  0x0       
 #define                      MC28  0x1000     /* Mailbox 28 Enable */
-#define                     nMC28  0x0       
 #define                      MC29  0x2000     /* Mailbox 29 Enable */
-#define                     nMC29  0x0       
 #define                      MC30  0x4000     /* Mailbox 30 Enable */
-#define                     nMC30  0x0       
 #define                      MC31  0x8000     /* Mailbox 31 Enable */
-#define                     nMC31  0x0       
 
 /* Bit masks for CAN0_MD1 */
 
 #define                       MD0  0x1        /* Mailbox 0 Receive Enable */
-#define                      nMD0  0x0       
 #define                       MD1  0x2        /* Mailbox 1 Receive Enable */
-#define                      nMD1  0x0       
 #define                       MD2  0x4        /* Mailbox 2 Receive Enable */
-#define                      nMD2  0x0       
 #define                       MD3  0x8        /* Mailbox 3 Receive Enable */
-#define                      nMD3  0x0       
 #define                       MD4  0x10       /* Mailbox 4 Receive Enable */
-#define                      nMD4  0x0       
 #define                       MD5  0x20       /* Mailbox 5 Receive Enable */
-#define                      nMD5  0x0       
 #define                       MD6  0x40       /* Mailbox 6 Receive Enable */
-#define                      nMD6  0x0       
 #define                       MD7  0x80       /* Mailbox 7 Receive Enable */
-#define                      nMD7  0x0       
 #define                       MD8  0x100      /* Mailbox 8 Receive Enable */
-#define                      nMD8  0x0       
 #define                       MD9  0x200      /* Mailbox 9 Receive Enable */
-#define                      nMD9  0x0       
 #define                      MD10  0x400      /* Mailbox 10 Receive Enable */
-#define                     nMD10  0x0       
 #define                      MD11  0x800      /* Mailbox 11 Receive Enable */
-#define                     nMD11  0x0       
 #define                      MD12  0x1000     /* Mailbox 12 Receive Enable */
-#define                     nMD12  0x0       
 #define                      MD13  0x2000     /* Mailbox 13 Receive Enable */
-#define                     nMD13  0x0       
 #define                      MD14  0x4000     /* Mailbox 14 Receive Enable */
-#define                     nMD14  0x0       
 #define                      MD15  0x8000     /* Mailbox 15 Receive Enable */
-#define                     nMD15  0x0       
 
 /* Bit masks for CAN0_MD2 */
 
 #define                      MD16  0x1        /* Mailbox 16 Receive Enable */
-#define                     nMD16  0x0       
 #define                      MD17  0x2        /* Mailbox 17 Receive Enable */
-#define                     nMD17  0x0       
 #define                      MD18  0x4        /* Mailbox 18 Receive Enable */
-#define                     nMD18  0x0       
 #define                      MD19  0x8        /* Mailbox 19 Receive Enable */
-#define                     nMD19  0x0       
 #define                      MD20  0x10       /* Mailbox 20 Receive Enable */
-#define                     nMD20  0x0       
 #define                      MD21  0x20       /* Mailbox 21 Receive Enable */
-#define                     nMD21  0x0       
 #define                      MD22  0x40       /* Mailbox 22 Receive Enable */
-#define                     nMD22  0x0       
 #define                      MD23  0x80       /* Mailbox 23 Receive Enable */
-#define                     nMD23  0x0       
 #define                      MD24  0x100      /* Mailbox 24 Receive Enable */
-#define                     nMD24  0x0       
 #define                      MD25  0x200      /* Mailbox 25 Receive Enable */
-#define                     nMD25  0x0       
 #define                      MD26  0x400      /* Mailbox 26 Receive Enable */
-#define                     nMD26  0x0       
 #define                      MD27  0x800      /* Mailbox 27 Receive Enable */
-#define                     nMD27  0x0       
 #define                      MD28  0x1000     /* Mailbox 28 Receive Enable */
-#define                     nMD28  0x0       
 #define                      MD29  0x2000     /* Mailbox 29 Receive Enable */
-#define                     nMD29  0x0       
 #define                      MD30  0x4000     /* Mailbox 30 Receive Enable */
-#define                     nMD30  0x0       
 #define                      MD31  0x8000     /* Mailbox 31 Receive Enable */
-#define                     nMD31  0x0       
 
 /* Bit masks for CAN0_RMP1 */
 
 #define                      RMP0  0x1        /* Mailbox 0 Receive Message Pending */
-#define                     nRMP0  0x0       
 #define                      RMP1  0x2        /* Mailbox 1 Receive Message Pending */
-#define                     nRMP1  0x0       
 #define                      RMP2  0x4        /* Mailbox 2 Receive Message Pending */
-#define                     nRMP2  0x0       
 #define                      RMP3  0x8        /* Mailbox 3 Receive Message Pending */
-#define                     nRMP3  0x0       
 #define                      RMP4  0x10       /* Mailbox 4 Receive Message Pending */
-#define                     nRMP4  0x0       
 #define                      RMP5  0x20       /* Mailbox 5 Receive Message Pending */
-#define                     nRMP5  0x0       
 #define                      RMP6  0x40       /* Mailbox 6 Receive Message Pending */
-#define                     nRMP6  0x0       
 #define                      RMP7  0x80       /* Mailbox 7 Receive Message Pending */
-#define                     nRMP7  0x0       
 #define                      RMP8  0x100      /* Mailbox 8 Receive Message Pending */
-#define                     nRMP8  0x0       
 #define                      RMP9  0x200      /* Mailbox 9 Receive Message Pending */
-#define                     nRMP9  0x0       
 #define                     RMP10  0x400      /* Mailbox 10 Receive Message Pending */
-#define                    nRMP10  0x0       
 #define                     RMP11  0x800      /* Mailbox 11 Receive Message Pending */
-#define                    nRMP11  0x0       
 #define                     RMP12  0x1000     /* Mailbox 12 Receive Message Pending */
-#define                    nRMP12  0x0       
 #define                     RMP13  0x2000     /* Mailbox 13 Receive Message Pending */
-#define                    nRMP13  0x0       
 #define                     RMP14  0x4000     /* Mailbox 14 Receive Message Pending */
-#define                    nRMP14  0x0       
 #define                     RMP15  0x8000     /* Mailbox 15 Receive Message Pending */
-#define                    nRMP15  0x0       
 
 /* Bit masks for CAN0_RMP2 */
 
 #define                     RMP16  0x1        /* Mailbox 16 Receive Message Pending */
-#define                    nRMP16  0x0       
 #define                     RMP17  0x2        /* Mailbox 17 Receive Message Pending */
-#define                    nRMP17  0x0       
 #define                     RMP18  0x4        /* Mailbox 18 Receive Message Pending */
-#define                    nRMP18  0x0       
 #define                     RMP19  0x8        /* Mailbox 19 Receive Message Pending */
-#define                    nRMP19  0x0       
 #define                     RMP20  0x10       /* Mailbox 20 Receive Message Pending */
-#define                    nRMP20  0x0       
 #define                     RMP21  0x20       /* Mailbox 21 Receive Message Pending */
-#define                    nRMP21  0x0       
 #define                     RMP22  0x40       /* Mailbox 22 Receive Message Pending */
-#define                    nRMP22  0x0       
 #define                     RMP23  0x80       /* Mailbox 23 Receive Message Pending */
-#define                    nRMP23  0x0       
 #define                     RMP24  0x100      /* Mailbox 24 Receive Message Pending */
-#define                    nRMP24  0x0       
 #define                     RMP25  0x200      /* Mailbox 25 Receive Message Pending */
-#define                    nRMP25  0x0       
 #define                     RMP26  0x400      /* Mailbox 26 Receive Message Pending */
-#define                    nRMP26  0x0       
 #define                     RMP27  0x800      /* Mailbox 27 Receive Message Pending */
-#define                    nRMP27  0x0       
 #define                     RMP28  0x1000     /* Mailbox 28 Receive Message Pending */
-#define                    nRMP28  0x0       
 #define                     RMP29  0x2000     /* Mailbox 29 Receive Message Pending */
-#define                    nRMP29  0x0       
 #define                     RMP30  0x4000     /* Mailbox 30 Receive Message Pending */
-#define                    nRMP30  0x0       
 #define                     RMP31  0x8000     /* Mailbox 31 Receive Message Pending */
-#define                    nRMP31  0x0       
 
 /* Bit masks for CAN0_RML1 */
 
 #define                      RML0  0x1        /* Mailbox 0 Receive Message Lost */
-#define                     nRML0  0x0       
 #define                      RML1  0x2        /* Mailbox 1 Receive Message Lost */
-#define                     nRML1  0x0       
 #define                      RML2  0x4        /* Mailbox 2 Receive Message Lost */
-#define                     nRML2  0x0       
 #define                      RML3  0x8        /* Mailbox 3 Receive Message Lost */
-#define                     nRML3  0x0       
 #define                      RML4  0x10       /* Mailbox 4 Receive Message Lost */
-#define                     nRML4  0x0       
 #define                      RML5  0x20       /* Mailbox 5 Receive Message Lost */
-#define                     nRML5  0x0       
 #define                      RML6  0x40       /* Mailbox 6 Receive Message Lost */
-#define                     nRML6  0x0       
 #define                      RML7  0x80       /* Mailbox 7 Receive Message Lost */
-#define                     nRML7  0x0       
 #define                      RML8  0x100      /* Mailbox 8 Receive Message Lost */
-#define                     nRML8  0x0       
 #define                      RML9  0x200      /* Mailbox 9 Receive Message Lost */
-#define                     nRML9  0x0       
 #define                     RML10  0x400      /* Mailbox 10 Receive Message Lost */
-#define                    nRML10  0x0       
 #define                     RML11  0x800      /* Mailbox 11 Receive Message Lost */
-#define                    nRML11  0x0       
 #define                     RML12  0x1000     /* Mailbox 12 Receive Message Lost */
-#define                    nRML12  0x0       
 #define                     RML13  0x2000     /* Mailbox 13 Receive Message Lost */
-#define                    nRML13  0x0       
 #define                     RML14  0x4000     /* Mailbox 14 Receive Message Lost */
-#define                    nRML14  0x0       
 #define                     RML15  0x8000     /* Mailbox 15 Receive Message Lost */
-#define                    nRML15  0x0       
 
 /* Bit masks for CAN0_RML2 */
 
 #define                     RML16  0x1        /* Mailbox 16 Receive Message Lost */
-#define                    nRML16  0x0       
 #define                     RML17  0x2        /* Mailbox 17 Receive Message Lost */
-#define                    nRML17  0x0       
 #define                     RML18  0x4        /* Mailbox 18 Receive Message Lost */
-#define                    nRML18  0x0       
 #define                     RML19  0x8        /* Mailbox 19 Receive Message Lost */
-#define                    nRML19  0x0       
 #define                     RML20  0x10       /* Mailbox 20 Receive Message Lost */
-#define                    nRML20  0x0       
 #define                     RML21  0x20       /* Mailbox 21 Receive Message Lost */
-#define                    nRML21  0x0       
 #define                     RML22  0x40       /* Mailbox 22 Receive Message Lost */
-#define                    nRML22  0x0       
 #define                     RML23  0x80       /* Mailbox 23 Receive Message Lost */
-#define                    nRML23  0x0       
 #define                     RML24  0x100      /* Mailbox 24 Receive Message Lost */
-#define                    nRML24  0x0       
 #define                     RML25  0x200      /* Mailbox 25 Receive Message Lost */
-#define                    nRML25  0x0       
 #define                     RML26  0x400      /* Mailbox 26 Receive Message Lost */
-#define                    nRML26  0x0       
 #define                     RML27  0x800      /* Mailbox 27 Receive Message Lost */
-#define                    nRML27  0x0       
 #define                     RML28  0x1000     /* Mailbox 28 Receive Message Lost */
-#define                    nRML28  0x0       
 #define                     RML29  0x2000     /* Mailbox 29 Receive Message Lost */
-#define                    nRML29  0x0       
 #define                     RML30  0x4000     /* Mailbox 30 Receive Message Lost */
-#define                    nRML30  0x0       
 #define                     RML31  0x8000     /* Mailbox 31 Receive Message Lost */
-#define                    nRML31  0x0       
 
 /* Bit masks for CAN0_OPSS1 */
 
 #define                     OPSS0  0x1        /* Mailbox 0 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS0  0x0       
 #define                     OPSS1  0x2        /* Mailbox 1 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS1  0x0       
 #define                     OPSS2  0x4        /* Mailbox 2 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS2  0x0       
 #define                     OPSS3  0x8        /* Mailbox 3 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS3  0x0       
 #define                     OPSS4  0x10       /* Mailbox 4 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS4  0x0       
 #define                     OPSS5  0x20       /* Mailbox 5 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS5  0x0       
 #define                     OPSS6  0x40       /* Mailbox 6 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS6  0x0       
 #define                     OPSS7  0x80       /* Mailbox 7 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS7  0x0       
 #define                     OPSS8  0x100      /* Mailbox 8 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS8  0x0       
 #define                     OPSS9  0x200      /* Mailbox 9 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS9  0x0       
 #define                    OPSS10  0x400      /* Mailbox 10 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS10  0x0       
 #define                    OPSS11  0x800      /* Mailbox 11 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS11  0x0       
 #define                    OPSS12  0x1000     /* Mailbox 12 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS12  0x0       
 #define                    OPSS13  0x2000     /* Mailbox 13 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS13  0x0       
 #define                    OPSS14  0x4000     /* Mailbox 14 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS14  0x0       
 #define                    OPSS15  0x8000     /* Mailbox 15 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS15  0x0       
 
 /* Bit masks for CAN0_OPSS2 */
 
 #define                    OPSS16  0x1        /* Mailbox 16 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS16  0x0       
 #define                    OPSS17  0x2        /* Mailbox 17 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS17  0x0       
 #define                    OPSS18  0x4        /* Mailbox 18 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS18  0x0       
 #define                    OPSS19  0x8        /* Mailbox 19 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS19  0x0       
 #define                    OPSS20  0x10       /* Mailbox 20 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS20  0x0       
 #define                    OPSS21  0x20       /* Mailbox 21 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS21  0x0       
 #define                    OPSS22  0x40       /* Mailbox 22 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS22  0x0       
 #define                    OPSS23  0x80       /* Mailbox 23 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS23  0x0       
 #define                    OPSS24  0x100      /* Mailbox 24 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS24  0x0       
 #define                    OPSS25  0x200      /* Mailbox 25 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS25  0x0       
 #define                    OPSS26  0x400      /* Mailbox 26 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS26  0x0       
 #define                    OPSS27  0x800      /* Mailbox 27 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS27  0x0       
 #define                    OPSS28  0x1000     /* Mailbox 28 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS28  0x0       
 #define                    OPSS29  0x2000     /* Mailbox 29 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS29  0x0       
 #define                    OPSS30  0x4000     /* Mailbox 30 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS30  0x0       
 #define                    OPSS31  0x8000     /* Mailbox 31 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS31  0x0       
 
 /* Bit masks for CAN0_TRS1 */
 
 #define                      TRS0  0x1        /* Mailbox 0 Transmit Request Set */
-#define                     nTRS0  0x0       
 #define                      TRS1  0x2        /* Mailbox 1 Transmit Request Set */
-#define                     nTRS1  0x0       
 #define                      TRS2  0x4        /* Mailbox 2 Transmit Request Set */
-#define                     nTRS2  0x0       
 #define                      TRS3  0x8        /* Mailbox 3 Transmit Request Set */
-#define                     nTRS3  0x0       
 #define                      TRS4  0x10       /* Mailbox 4 Transmit Request Set */
-#define                     nTRS4  0x0       
 #define                      TRS5  0x20       /* Mailbox 5 Transmit Request Set */
-#define                     nTRS5  0x0       
 #define                      TRS6  0x40       /* Mailbox 6 Transmit Request Set */
-#define                     nTRS6  0x0       
 #define                      TRS7  0x80       /* Mailbox 7 Transmit Request Set */
-#define                     nTRS7  0x0       
 #define                      TRS8  0x100      /* Mailbox 8 Transmit Request Set */
-#define                     nTRS8  0x0       
 #define                      TRS9  0x200      /* Mailbox 9 Transmit Request Set */
-#define                     nTRS9  0x0       
 #define                     TRS10  0x400      /* Mailbox 10 Transmit Request Set */
-#define                    nTRS10  0x0       
 #define                     TRS11  0x800      /* Mailbox 11 Transmit Request Set */
-#define                    nTRS11  0x0       
 #define                     TRS12  0x1000     /* Mailbox 12 Transmit Request Set */
-#define                    nTRS12  0x0       
 #define                     TRS13  0x2000     /* Mailbox 13 Transmit Request Set */
-#define                    nTRS13  0x0       
 #define                     TRS14  0x4000     /* Mailbox 14 Transmit Request Set */
-#define                    nTRS14  0x0       
 #define                     TRS15  0x8000     /* Mailbox 15 Transmit Request Set */
-#define                    nTRS15  0x0       
 
 /* Bit masks for CAN0_TRS2 */
 
 #define                     TRS16  0x1        /* Mailbox 16 Transmit Request Set */
-#define                    nTRS16  0x0       
 #define                     TRS17  0x2        /* Mailbox 17 Transmit Request Set */
-#define                    nTRS17  0x0       
 #define                     TRS18  0x4        /* Mailbox 18 Transmit Request Set */
-#define                    nTRS18  0x0       
 #define                     TRS19  0x8        /* Mailbox 19 Transmit Request Set */
-#define                    nTRS19  0x0       
 #define                     TRS20  0x10       /* Mailbox 20 Transmit Request Set */
-#define                    nTRS20  0x0       
 #define                     TRS21  0x20       /* Mailbox 21 Transmit Request Set */
-#define                    nTRS21  0x0       
 #define                     TRS22  0x40       /* Mailbox 22 Transmit Request Set */
-#define                    nTRS22  0x0       
 #define                     TRS23  0x80       /* Mailbox 23 Transmit Request Set */
-#define                    nTRS23  0x0       
 #define                     TRS24  0x100      /* Mailbox 24 Transmit Request Set */
-#define                    nTRS24  0x0       
 #define                     TRS25  0x200      /* Mailbox 25 Transmit Request Set */
-#define                    nTRS25  0x0       
 #define                     TRS26  0x400      /* Mailbox 26 Transmit Request Set */
-#define                    nTRS26  0x0       
 #define                     TRS27  0x800      /* Mailbox 27 Transmit Request Set */
-#define                    nTRS27  0x0       
 #define                     TRS28  0x1000     /* Mailbox 28 Transmit Request Set */
-#define                    nTRS28  0x0       
 #define                     TRS29  0x2000     /* Mailbox 29 Transmit Request Set */
-#define                    nTRS29  0x0       
 #define                     TRS30  0x4000     /* Mailbox 30 Transmit Request Set */
-#define                    nTRS30  0x0       
 #define                     TRS31  0x8000     /* Mailbox 31 Transmit Request Set */
-#define                    nTRS31  0x0       
 
 /* Bit masks for CAN0_TRR1 */
 
 #define                      TRR0  0x1        /* Mailbox 0 Transmit Request Reset */
-#define                     nTRR0  0x0       
 #define                      TRR1  0x2        /* Mailbox 1 Transmit Request Reset */
-#define                     nTRR1  0x0       
 #define                      TRR2  0x4        /* Mailbox 2 Transmit Request Reset */
-#define                     nTRR2  0x0       
 #define                      TRR3  0x8        /* Mailbox 3 Transmit Request Reset */
-#define                     nTRR3  0x0       
 #define                      TRR4  0x10       /* Mailbox 4 Transmit Request Reset */
-#define                     nTRR4  0x0       
 #define                      TRR5  0x20       /* Mailbox 5 Transmit Request Reset */
-#define                     nTRR5  0x0       
 #define                      TRR6  0x40       /* Mailbox 6 Transmit Request Reset */
-#define                     nTRR6  0x0       
 #define                      TRR7  0x80       /* Mailbox 7 Transmit Request Reset */
-#define                     nTRR7  0x0       
 #define                      TRR8  0x100      /* Mailbox 8 Transmit Request Reset */
-#define                     nTRR8  0x0       
 #define                      TRR9  0x200      /* Mailbox 9 Transmit Request Reset */
-#define                     nTRR9  0x0       
 #define                     TRR10  0x400      /* Mailbox 10 Transmit Request Reset */
-#define                    nTRR10  0x0       
 #define                     TRR11  0x800      /* Mailbox 11 Transmit Request Reset */
-#define                    nTRR11  0x0       
 #define                     TRR12  0x1000     /* Mailbox 12 Transmit Request Reset */
-#define                    nTRR12  0x0       
 #define                     TRR13  0x2000     /* Mailbox 13 Transmit Request Reset */
-#define                    nTRR13  0x0       
 #define                     TRR14  0x4000     /* Mailbox 14 Transmit Request Reset */
-#define                    nTRR14  0x0       
 #define                     TRR15  0x8000     /* Mailbox 15 Transmit Request Reset */
-#define                    nTRR15  0x0       
 
 /* Bit masks for CAN0_TRR2 */
 
 #define                     TRR16  0x1        /* Mailbox 16 Transmit Request Reset */
-#define                    nTRR16  0x0       
 #define                     TRR17  0x2        /* Mailbox 17 Transmit Request Reset */
-#define                    nTRR17  0x0       
 #define                     TRR18  0x4        /* Mailbox 18 Transmit Request Reset */
-#define                    nTRR18  0x0       
 #define                     TRR19  0x8        /* Mailbox 19 Transmit Request Reset */
-#define                    nTRR19  0x0       
 #define                     TRR20  0x10       /* Mailbox 20 Transmit Request Reset */
-#define                    nTRR20  0x0       
 #define                     TRR21  0x20       /* Mailbox 21 Transmit Request Reset */
-#define                    nTRR21  0x0       
 #define                     TRR22  0x40       /* Mailbox 22 Transmit Request Reset */
-#define                    nTRR22  0x0       
 #define                     TRR23  0x80       /* Mailbox 23 Transmit Request Reset */
-#define                    nTRR23  0x0       
 #define                     TRR24  0x100      /* Mailbox 24 Transmit Request Reset */
-#define                    nTRR24  0x0       
 #define                     TRR25  0x200      /* Mailbox 25 Transmit Request Reset */
-#define                    nTRR25  0x0       
 #define                     TRR26  0x400      /* Mailbox 26 Transmit Request Reset */
-#define                    nTRR26  0x0       
 #define                     TRR27  0x800      /* Mailbox 27 Transmit Request Reset */
-#define                    nTRR27  0x0       
 #define                     TRR28  0x1000     /* Mailbox 28 Transmit Request Reset */
-#define                    nTRR28  0x0       
 #define                     TRR29  0x2000     /* Mailbox 29 Transmit Request Reset */
-#define                    nTRR29  0x0       
 #define                     TRR30  0x4000     /* Mailbox 30 Transmit Request Reset */
-#define                    nTRR30  0x0       
 #define                     TRR31  0x8000     /* Mailbox 31 Transmit Request Reset */
-#define                    nTRR31  0x0       
 
 /* Bit masks for CAN0_AA1 */
 
 #define                       AA0  0x1        /* Mailbox 0 Abort Acknowledge */
-#define                      nAA0  0x0       
 #define                       AA1  0x2        /* Mailbox 1 Abort Acknowledge */
-#define                      nAA1  0x0       
 #define                       AA2  0x4        /* Mailbox 2 Abort Acknowledge */
-#define                      nAA2  0x0       
 #define                       AA3  0x8        /* Mailbox 3 Abort Acknowledge */
-#define                      nAA3  0x0       
 #define                       AA4  0x10       /* Mailbox 4 Abort Acknowledge */
-#define                      nAA4  0x0       
 #define                       AA5  0x20       /* Mailbox 5 Abort Acknowledge */
-#define                      nAA5  0x0       
 #define                       AA6  0x40       /* Mailbox 6 Abort Acknowledge */
-#define                      nAA6  0x0       
 #define                       AA7  0x80       /* Mailbox 7 Abort Acknowledge */
-#define                      nAA7  0x0       
 #define                       AA8  0x100      /* Mailbox 8 Abort Acknowledge */
-#define                      nAA8  0x0       
 #define                       AA9  0x200      /* Mailbox 9 Abort Acknowledge */
-#define                      nAA9  0x0       
 #define                      AA10  0x400      /* Mailbox 10 Abort Acknowledge */
-#define                     nAA10  0x0       
 #define                      AA11  0x800      /* Mailbox 11 Abort Acknowledge */
-#define                     nAA11  0x0       
 #define                      AA12  0x1000     /* Mailbox 12 Abort Acknowledge */
-#define                     nAA12  0x0       
 #define                      AA13  0x2000     /* Mailbox 13 Abort Acknowledge */
-#define                     nAA13  0x0       
 #define                      AA14  0x4000     /* Mailbox 14 Abort Acknowledge */
-#define                     nAA14  0x0       
 #define                      AA15  0x8000     /* Mailbox 15 Abort Acknowledge */
-#define                     nAA15  0x0       
 
 /* Bit masks for CAN0_AA2 */
 
 #define                      AA16  0x1        /* Mailbox 16 Abort Acknowledge */
-#define                     nAA16  0x0       
 #define                      AA17  0x2        /* Mailbox 17 Abort Acknowledge */
-#define                     nAA17  0x0       
 #define                      AA18  0x4        /* Mailbox 18 Abort Acknowledge */
-#define                     nAA18  0x0       
 #define                      AA19  0x8        /* Mailbox 19 Abort Acknowledge */
-#define                     nAA19  0x0       
 #define                      AA20  0x10       /* Mailbox 20 Abort Acknowledge */
-#define                     nAA20  0x0       
 #define                      AA21  0x20       /* Mailbox 21 Abort Acknowledge */
-#define                     nAA21  0x0       
 #define                      AA22  0x40       /* Mailbox 22 Abort Acknowledge */
-#define                     nAA22  0x0       
 #define                      AA23  0x80       /* Mailbox 23 Abort Acknowledge */
-#define                     nAA23  0x0       
 #define                      AA24  0x100      /* Mailbox 24 Abort Acknowledge */
-#define                     nAA24  0x0       
 #define                      AA25  0x200      /* Mailbox 25 Abort Acknowledge */
-#define                     nAA25  0x0       
 #define                      AA26  0x400      /* Mailbox 26 Abort Acknowledge */
-#define                     nAA26  0x0       
 #define                      AA27  0x800      /* Mailbox 27 Abort Acknowledge */
-#define                     nAA27  0x0       
 #define                      AA28  0x1000     /* Mailbox 28 Abort Acknowledge */
-#define                     nAA28  0x0       
 #define                      AA29  0x2000     /* Mailbox 29 Abort Acknowledge */
-#define                     nAA29  0x0       
 #define                      AA30  0x4000     /* Mailbox 30 Abort Acknowledge */
-#define                     nAA30  0x0       
 #define                      AA31  0x8000     /* Mailbox 31 Abort Acknowledge */
-#define                     nAA31  0x0       
 
 /* Bit masks for CAN0_TA1 */
 
 #define                       TA0  0x1        /* Mailbox 0 Transmit Acknowledge */
-#define                      nTA0  0x0       
 #define                       TA1  0x2        /* Mailbox 1 Transmit Acknowledge */
-#define                      nTA1  0x0       
 #define                       TA2  0x4        /* Mailbox 2 Transmit Acknowledge */
-#define                      nTA2  0x0       
 #define                       TA3  0x8        /* Mailbox 3 Transmit Acknowledge */
-#define                      nTA3  0x0       
 #define                       TA4  0x10       /* Mailbox 4 Transmit Acknowledge */
-#define                      nTA4  0x0       
 #define                       TA5  0x20       /* Mailbox 5 Transmit Acknowledge */
-#define                      nTA5  0x0       
 #define                       TA6  0x40       /* Mailbox 6 Transmit Acknowledge */
-#define                      nTA6  0x0       
 #define                       TA7  0x80       /* Mailbox 7 Transmit Acknowledge */
-#define                      nTA7  0x0       
 #define                       TA8  0x100      /* Mailbox 8 Transmit Acknowledge */
-#define                      nTA8  0x0       
 #define                       TA9  0x200      /* Mailbox 9 Transmit Acknowledge */
-#define                      nTA9  0x0       
 #define                      TA10  0x400      /* Mailbox 10 Transmit Acknowledge */
-#define                     nTA10  0x0       
 #define                      TA11  0x800      /* Mailbox 11 Transmit Acknowledge */
-#define                     nTA11  0x0       
 #define                      TA12  0x1000     /* Mailbox 12 Transmit Acknowledge */
-#define                     nTA12  0x0       
 #define                      TA13  0x2000     /* Mailbox 13 Transmit Acknowledge */
-#define                     nTA13  0x0       
 #define                      TA14  0x4000     /* Mailbox 14 Transmit Acknowledge */
-#define                     nTA14  0x0       
 #define                      TA15  0x8000     /* Mailbox 15 Transmit Acknowledge */
-#define                     nTA15  0x0       
 
 /* Bit masks for CAN0_TA2 */
 
 #define                      TA16  0x1        /* Mailbox 16 Transmit Acknowledge */
-#define                     nTA16  0x0       
 #define                      TA17  0x2        /* Mailbox 17 Transmit Acknowledge */
-#define                     nTA17  0x0       
 #define                      TA18  0x4        /* Mailbox 18 Transmit Acknowledge */
-#define                     nTA18  0x0       
 #define                      TA19  0x8        /* Mailbox 19 Transmit Acknowledge */
-#define                     nTA19  0x0       
 #define                      TA20  0x10       /* Mailbox 20 Transmit Acknowledge */
-#define                     nTA20  0x0       
 #define                      TA21  0x20       /* Mailbox 21 Transmit Acknowledge */
-#define                     nTA21  0x0       
 #define                      TA22  0x40       /* Mailbox 22 Transmit Acknowledge */
-#define                     nTA22  0x0       
 #define                      TA23  0x80       /* Mailbox 23 Transmit Acknowledge */
-#define                     nTA23  0x0       
 #define                      TA24  0x100      /* Mailbox 24 Transmit Acknowledge */
-#define                     nTA24  0x0       
 #define                      TA25  0x200      /* Mailbox 25 Transmit Acknowledge */
-#define                     nTA25  0x0       
 #define                      TA26  0x400      /* Mailbox 26 Transmit Acknowledge */
-#define                     nTA26  0x0       
 #define                      TA27  0x800      /* Mailbox 27 Transmit Acknowledge */
-#define                     nTA27  0x0       
 #define                      TA28  0x1000     /* Mailbox 28 Transmit Acknowledge */
-#define                     nTA28  0x0       
 #define                      TA29  0x2000     /* Mailbox 29 Transmit Acknowledge */
-#define                     nTA29  0x0       
 #define                      TA30  0x4000     /* Mailbox 30 Transmit Acknowledge */
-#define                     nTA30  0x0       
 #define                      TA31  0x8000     /* Mailbox 31 Transmit Acknowledge */
-#define                     nTA31  0x0       
 
 /* Bit masks for CAN0_RFH1 */
 
 #define                      RFH0  0x1        /* Mailbox 0 Remote Frame Handling Enable */
-#define                     nRFH0  0x0       
 #define                      RFH1  0x2        /* Mailbox 1 Remote Frame Handling Enable */
-#define                     nRFH1  0x0       
 #define                      RFH2  0x4        /* Mailbox 2 Remote Frame Handling Enable */
-#define                     nRFH2  0x0       
 #define                      RFH3  0x8        /* Mailbox 3 Remote Frame Handling Enable */
-#define                     nRFH3  0x0       
 #define                      RFH4  0x10       /* Mailbox 4 Remote Frame Handling Enable */
-#define                     nRFH4  0x0       
 #define                      RFH5  0x20       /* Mailbox 5 Remote Frame Handling Enable */
-#define                     nRFH5  0x0       
 #define                      RFH6  0x40       /* Mailbox 6 Remote Frame Handling Enable */
-#define                     nRFH6  0x0       
 #define                      RFH7  0x80       /* Mailbox 7 Remote Frame Handling Enable */
-#define                     nRFH7  0x0       
 #define                      RFH8  0x100      /* Mailbox 8 Remote Frame Handling Enable */
-#define                     nRFH8  0x0       
 #define                      RFH9  0x200      /* Mailbox 9 Remote Frame Handling Enable */
-#define                     nRFH9  0x0       
 #define                     RFH10  0x400      /* Mailbox 10 Remote Frame Handling Enable */
-#define                    nRFH10  0x0       
 #define                     RFH11  0x800      /* Mailbox 11 Remote Frame Handling Enable */
-#define                    nRFH11  0x0       
 #define                     RFH12  0x1000     /* Mailbox 12 Remote Frame Handling Enable */
-#define                    nRFH12  0x0       
 #define                     RFH13  0x2000     /* Mailbox 13 Remote Frame Handling Enable */
-#define                    nRFH13  0x0       
 #define                     RFH14  0x4000     /* Mailbox 14 Remote Frame Handling Enable */
-#define                    nRFH14  0x0       
 #define                     RFH15  0x8000     /* Mailbox 15 Remote Frame Handling Enable */
-#define                    nRFH15  0x0       
 
 /* Bit masks for CAN0_RFH2 */
 
 #define                     RFH16  0x1        /* Mailbox 16 Remote Frame Handling Enable */
-#define                    nRFH16  0x0       
 #define                     RFH17  0x2        /* Mailbox 17 Remote Frame Handling Enable */
-#define                    nRFH17  0x0       
 #define                     RFH18  0x4        /* Mailbox 18 Remote Frame Handling Enable */
-#define                    nRFH18  0x0       
 #define                     RFH19  0x8        /* Mailbox 19 Remote Frame Handling Enable */
-#define                    nRFH19  0x0       
 #define                     RFH20  0x10       /* Mailbox 20 Remote Frame Handling Enable */
-#define                    nRFH20  0x0       
 #define                     RFH21  0x20       /* Mailbox 21 Remote Frame Handling Enable */
-#define                    nRFH21  0x0       
 #define                     RFH22  0x40       /* Mailbox 22 Remote Frame Handling Enable */
-#define                    nRFH22  0x0       
 #define                     RFH23  0x80       /* Mailbox 23 Remote Frame Handling Enable */
-#define                    nRFH23  0x0       
 #define                     RFH24  0x100      /* Mailbox 24 Remote Frame Handling Enable */
-#define                    nRFH24  0x0       
 #define                     RFH25  0x200      /* Mailbox 25 Remote Frame Handling Enable */
-#define                    nRFH25  0x0       
 #define                     RFH26  0x400      /* Mailbox 26 Remote Frame Handling Enable */
-#define                    nRFH26  0x0       
 #define                     RFH27  0x800      /* Mailbox 27 Remote Frame Handling Enable */
-#define                    nRFH27  0x0       
 #define                     RFH28  0x1000     /* Mailbox 28 Remote Frame Handling Enable */
-#define                    nRFH28  0x0       
 #define                     RFH29  0x2000     /* Mailbox 29 Remote Frame Handling Enable */
-#define                    nRFH29  0x0       
 #define                     RFH30  0x4000     /* Mailbox 30 Remote Frame Handling Enable */
-#define                    nRFH30  0x0       
 #define                     RFH31  0x8000     /* Mailbox 31 Remote Frame Handling Enable */
-#define                    nRFH31  0x0       
 
 /* Bit masks for CAN0_MBIM1 */
 
 #define                     MBIM0  0x1        /* Mailbox 0 Mailbox Interrupt Mask */
-#define                    nMBIM0  0x0       
 #define                     MBIM1  0x2        /* Mailbox 1 Mailbox Interrupt Mask */
-#define                    nMBIM1  0x0       
 #define                     MBIM2  0x4        /* Mailbox 2 Mailbox Interrupt Mask */
-#define                    nMBIM2  0x0       
 #define                     MBIM3  0x8        /* Mailbox 3 Mailbox Interrupt Mask */
-#define                    nMBIM3  0x0       
 #define                     MBIM4  0x10       /* Mailbox 4 Mailbox Interrupt Mask */
-#define                    nMBIM4  0x0       
 #define                     MBIM5  0x20       /* Mailbox 5 Mailbox Interrupt Mask */
-#define                    nMBIM5  0x0       
 #define                     MBIM6  0x40       /* Mailbox 6 Mailbox Interrupt Mask */
-#define                    nMBIM6  0x0       
 #define                     MBIM7  0x80       /* Mailbox 7 Mailbox Interrupt Mask */
-#define                    nMBIM7  0x0       
 #define                     MBIM8  0x100      /* Mailbox 8 Mailbox Interrupt Mask */
-#define                    nMBIM8  0x0       
 #define                     MBIM9  0x200      /* Mailbox 9 Mailbox Interrupt Mask */
-#define                    nMBIM9  0x0       
 #define                    MBIM10  0x400      /* Mailbox 10 Mailbox Interrupt Mask */
-#define                   nMBIM10  0x0       
 #define                    MBIM11  0x800      /* Mailbox 11 Mailbox Interrupt Mask */
-#define                   nMBIM11  0x0       
 #define                    MBIM12  0x1000     /* Mailbox 12 Mailbox Interrupt Mask */
-#define                   nMBIM12  0x0       
 #define                    MBIM13  0x2000     /* Mailbox 13 Mailbox Interrupt Mask */
-#define                   nMBIM13  0x0       
 #define                    MBIM14  0x4000     /* Mailbox 14 Mailbox Interrupt Mask */
-#define                   nMBIM14  0x0       
 #define                    MBIM15  0x8000     /* Mailbox 15 Mailbox Interrupt Mask */
-#define                   nMBIM15  0x0       
 
 /* Bit masks for CAN0_MBIM2 */
 
 #define                    MBIM16  0x1        /* Mailbox 16 Mailbox Interrupt Mask */
-#define                   nMBIM16  0x0       
 #define                    MBIM17  0x2        /* Mailbox 17 Mailbox Interrupt Mask */
-#define                   nMBIM17  0x0       
 #define                    MBIM18  0x4        /* Mailbox 18 Mailbox Interrupt Mask */
-#define                   nMBIM18  0x0       
 #define                    MBIM19  0x8        /* Mailbox 19 Mailbox Interrupt Mask */
-#define                   nMBIM19  0x0       
 #define                    MBIM20  0x10       /* Mailbox 20 Mailbox Interrupt Mask */
-#define                   nMBIM20  0x0       
 #define                    MBIM21  0x20       /* Mailbox 21 Mailbox Interrupt Mask */
-#define                   nMBIM21  0x0       
 #define                    MBIM22  0x40       /* Mailbox 22 Mailbox Interrupt Mask */
-#define                   nMBIM22  0x0       
 #define                    MBIM23  0x80       /* Mailbox 23 Mailbox Interrupt Mask */
-#define                   nMBIM23  0x0       
 #define                    MBIM24  0x100      /* Mailbox 24 Mailbox Interrupt Mask */
-#define                   nMBIM24  0x0       
 #define                    MBIM25  0x200      /* Mailbox 25 Mailbox Interrupt Mask */
-#define                   nMBIM25  0x0       
 #define                    MBIM26  0x400      /* Mailbox 26 Mailbox Interrupt Mask */
-#define                   nMBIM26  0x0       
 #define                    MBIM27  0x800      /* Mailbox 27 Mailbox Interrupt Mask */
-#define                   nMBIM27  0x0       
 #define                    MBIM28  0x1000     /* Mailbox 28 Mailbox Interrupt Mask */
-#define                   nMBIM28  0x0       
 #define                    MBIM29  0x2000     /* Mailbox 29 Mailbox Interrupt Mask */
-#define                   nMBIM29  0x0       
 #define                    MBIM30  0x4000     /* Mailbox 30 Mailbox Interrupt Mask */
-#define                   nMBIM30  0x0       
 #define                    MBIM31  0x8000     /* Mailbox 31 Mailbox Interrupt Mask */
-#define                   nMBIM31  0x0       
 
 /* Bit masks for CAN0_MBTIF1 */
 
 #define                    MBTIF0  0x1        /* Mailbox 0 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF0  0x0       
 #define                    MBTIF1  0x2        /* Mailbox 1 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF1  0x0       
 #define                    MBTIF2  0x4        /* Mailbox 2 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF2  0x0       
 #define                    MBTIF3  0x8        /* Mailbox 3 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF3  0x0       
 #define                    MBTIF4  0x10       /* Mailbox 4 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF4  0x0       
 #define                    MBTIF5  0x20       /* Mailbox 5 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF5  0x0       
 #define                    MBTIF6  0x40       /* Mailbox 6 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF6  0x0       
 #define                    MBTIF7  0x80       /* Mailbox 7 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF7  0x0       
 #define                    MBTIF8  0x100      /* Mailbox 8 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF8  0x0       
 #define                    MBTIF9  0x200      /* Mailbox 9 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF9  0x0       
 #define                   MBTIF10  0x400      /* Mailbox 10 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF10  0x0       
 #define                   MBTIF11  0x800      /* Mailbox 11 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF11  0x0       
 #define                   MBTIF12  0x1000     /* Mailbox 12 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF12  0x0       
 #define                   MBTIF13  0x2000     /* Mailbox 13 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF13  0x0       
 #define                   MBTIF14  0x4000     /* Mailbox 14 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF14  0x0       
 #define                   MBTIF15  0x8000     /* Mailbox 15 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF15  0x0       
 
 /* Bit masks for CAN0_MBTIF2 */
 
 #define                   MBTIF16  0x1        /* Mailbox 16 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF16  0x0       
 #define                   MBTIF17  0x2        /* Mailbox 17 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF17  0x0       
 #define                   MBTIF18  0x4        /* Mailbox 18 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF18  0x0       
 #define                   MBTIF19  0x8        /* Mailbox 19 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF19  0x0       
 #define                   MBTIF20  0x10       /* Mailbox 20 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF20  0x0       
 #define                   MBTIF21  0x20       /* Mailbox 21 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF21  0x0       
 #define                   MBTIF22  0x40       /* Mailbox 22 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF22  0x0       
 #define                   MBTIF23  0x80       /* Mailbox 23 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF23  0x0       
 #define                   MBTIF24  0x100      /* Mailbox 24 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF24  0x0       
 #define                   MBTIF25  0x200      /* Mailbox 25 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF25  0x0       
 #define                   MBTIF26  0x400      /* Mailbox 26 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF26  0x0       
 #define                   MBTIF27  0x800      /* Mailbox 27 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF27  0x0       
 #define                   MBTIF28  0x1000     /* Mailbox 28 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF28  0x0       
 #define                   MBTIF29  0x2000     /* Mailbox 29 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF29  0x0       
 #define                   MBTIF30  0x4000     /* Mailbox 30 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF30  0x0       
 #define                   MBTIF31  0x8000     /* Mailbox 31 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF31  0x0       
 
 /* Bit masks for CAN0_MBRIF1 */
 
 #define                    MBRIF0  0x1        /* Mailbox 0 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF0  0x0       
 #define                    MBRIF1  0x2        /* Mailbox 1 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF1  0x0       
 #define                    MBRIF2  0x4        /* Mailbox 2 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF2  0x0       
 #define                    MBRIF3  0x8        /* Mailbox 3 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF3  0x0       
 #define                    MBRIF4  0x10       /* Mailbox 4 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF4  0x0       
 #define                    MBRIF5  0x20       /* Mailbox 5 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF5  0x0       
 #define                    MBRIF6  0x40       /* Mailbox 6 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF6  0x0       
 #define                    MBRIF7  0x80       /* Mailbox 7 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF7  0x0       
 #define                    MBRIF8  0x100      /* Mailbox 8 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF8  0x0       
 #define                    MBRIF9  0x200      /* Mailbox 9 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF9  0x0       
 #define                   MBRIF10  0x400      /* Mailbox 10 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF10  0x0       
 #define                   MBRIF11  0x800      /* Mailbox 11 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF11  0x0       
 #define                   MBRIF12  0x1000     /* Mailbox 12 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF12  0x0       
 #define                   MBRIF13  0x2000     /* Mailbox 13 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF13  0x0       
 #define                   MBRIF14  0x4000     /* Mailbox 14 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF14  0x0       
 #define                   MBRIF15  0x8000     /* Mailbox 15 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF15  0x0       
 
 /* Bit masks for CAN0_MBRIF2 */
 
 #define                   MBRIF16  0x1        /* Mailbox 16 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF16  0x0       
 #define                   MBRIF17  0x2        /* Mailbox 17 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF17  0x0       
 #define                   MBRIF18  0x4        /* Mailbox 18 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF18  0x0       
 #define                   MBRIF19  0x8        /* Mailbox 19 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF19  0x0       
 #define                   MBRIF20  0x10       /* Mailbox 20 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF20  0x0       
 #define                   MBRIF21  0x20       /* Mailbox 21 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF21  0x0       
 #define                   MBRIF22  0x40       /* Mailbox 22 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF22  0x0       
 #define                   MBRIF23  0x80       /* Mailbox 23 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF23  0x0       
 #define                   MBRIF24  0x100      /* Mailbox 24 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF24  0x0       
 #define                   MBRIF25  0x200      /* Mailbox 25 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF25  0x0       
 #define                   MBRIF26  0x400      /* Mailbox 26 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF26  0x0       
 #define                   MBRIF27  0x800      /* Mailbox 27 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF27  0x0       
 #define                   MBRIF28  0x1000     /* Mailbox 28 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF28  0x0       
 #define                   MBRIF29  0x2000     /* Mailbox 29 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF29  0x0       
 #define                   MBRIF30  0x4000     /* Mailbox 30 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF30  0x0       
 #define                   MBRIF31  0x8000     /* Mailbox 31 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF31  0x0       
 
 /* Bit masks for EPPIx_STATUS */
 
 #define                 CFIFO_ERR  0x1        /* Chroma FIFO Error */
-#define                nCFIFO_ERR  0x0       
 #define                 YFIFO_ERR  0x2        /* Luma FIFO Error */
-#define                nYFIFO_ERR  0x0       
 #define                 LTERR_OVR  0x4        /* Line Track Overflow */
-#define                nLTERR_OVR  0x0       
 #define                LTERR_UNDR  0x8        /* Line Track Underflow */
-#define               nLTERR_UNDR  0x0       
 #define                 FTERR_OVR  0x10       /* Frame Track Overflow */
-#define                nFTERR_OVR  0x0       
 #define                FTERR_UNDR  0x20       /* Frame Track Underflow */
-#define               nFTERR_UNDR  0x0       
 #define                  ERR_NCOR  0x40       /* Preamble Error Not Corrected */
-#define                 nERR_NCOR  0x0       
 #define                   DMA1URQ  0x80       /* DMA1 Urgent Request */
-#define                  nDMA1URQ  0x0       
 #define                   DMA0URQ  0x100      /* DMA0 Urgent Request */
-#define                  nDMA0URQ  0x0       
 #define                   ERR_DET  0x4000     /* Preamble Error Detected */
-#define                  nERR_DET  0x0       
 #define                       FLD  0x8000     /* Field */
-#define                      nFLD  0x0       
 
 /* Bit masks for EPPIx_CONTROL */
 
 #define                   EPPI_EN  0x1        /* Enable */
-#define                  nEPPI_EN  0x0       
 #define                  EPPI_DIR  0x2        /* Direction */
-#define                 nEPPI_DIR  0x0       
 #define                  XFR_TYPE  0xc        /* Operating Mode */
 #define                    FS_CFG  0x30       /* Frame Sync Configuration */
 #define                   FLD_SEL  0x40       /* Field Select/Trigger */
-#define                  nFLD_SEL  0x0       
 #define                  ITU_TYPE  0x80       /* ITU Interlaced or Progressive */
-#define                 nITU_TYPE  0x0       
 #define                  BLANKGEN  0x100      /* ITU Output Mode with Internal Blanking Generation */
-#define                 nBLANKGEN  0x0       
 #define                   ICLKGEN  0x200      /* Internal Clock Generation */
-#define                  nICLKGEN  0x0       
 #define                    IFSGEN  0x400      /* Internal Frame Sync Generation */
-#define                   nIFSGEN  0x0       
 #define                      POLC  0x1800     /* Frame Sync and Data Driving/Sampling Edges */
 #define                      POLS  0x6000     /* Frame Sync Polarity */
 #define                   DLENGTH  0x38000    /* Data Length */
 #define                   SKIP_EN  0x40000    /* Skip Enable */
-#define                  nSKIP_EN  0x0       
 #define                   SKIP_EO  0x80000    /* Skip Even or Odd */
-#define                  nSKIP_EO  0x0       
 #define                    PACKEN  0x100000   /* Packing/Unpacking Enable */
-#define                   nPACKEN  0x0       
 #define                    SWAPEN  0x200000   /* Swap Enable */
-#define                   nSWAPEN  0x0       
 #define                  SIGN_EXT  0x400000   /* Sign Extension or Zero-filled / Data Split Format */
-#define                 nSIGN_EXT  0x0       
 #define             SPLT_EVEN_ODD  0x800000   /* Split Even and Odd Data Samples */
-#define            nSPLT_EVEN_ODD  0x0       
 #define               SUBSPLT_ODD  0x1000000  /* Sub-split Odd Samples */
-#define              nSUBSPLT_ODD  0x0       
 #define                    DMACFG  0x2000000  /* One or Two DMA Channels Mode */
-#define                   nDMACFG  0x0       
 #define                RGB_FMT_EN  0x4000000  /* RGB Formatting Enable */
-#define               nRGB_FMT_EN  0x0       
 #define                  FIFO_RWM  0x18000000 /* FIFO Regular Watermarks */
 #define                  FIFO_UWM  0x60000000 /* FIFO Urgent Watermarks */
 
@@ -3951,60 +3076,36 @@
 /* Bit masks for SPIx_CTL */
 
 #define                       SPE  0x4000     /* SPI Enable */
-#define                      nSPE  0x0       
 #define                       WOM  0x2000     /* Write Open Drain Master */
-#define                      nWOM  0x0       
 #define                      MSTR  0x1000     /* Master Mode */
-#define                     nMSTR  0x0       
 #define                      CPOL  0x800      /* Clock Polarity */
-#define                     nCPOL  0x0       
 #define                      CPHA  0x400      /* Clock Phase */
-#define                     nCPHA  0x0       
 #define                      LSBF  0x200      /* LSB First */
-#define                     nLSBF  0x0       
 #define                      SIZE  0x100      /* Size of Words */
-#define                     nSIZE  0x0       
 #define                     EMISO  0x20       /* Enable MISO Output */
-#define                    nEMISO  0x0       
 #define                      PSSE  0x10       /* Slave-Select Enable */
-#define                     nPSSE  0x0       
 #define                        GM  0x8        /* Get More Data */
-#define                       nGM  0x0       
 #define                        SZ  0x4        /* Send Zero */
-#define                       nSZ  0x0       
 #define                     TIMOD  0x3        /* Transfer Initiation Mode */
 
 /* Bit masks for SPIx_FLG */
 
 #define                      FLS1  0x2        /* Slave Select Enable 1 */
-#define                     nFLS1  0x0       
 #define                      FLS2  0x4        /* Slave Select Enable 2 */
-#define                     nFLS2  0x0       
 #define                      FLS3  0x8        /* Slave Select Enable 3 */
-#define                     nFLS3  0x0       
 #define                      FLG1  0x200      /* Slave Select Value 1 */
-#define                     nFLG1  0x0       
 #define                      FLG2  0x400      /* Slave Select Value 2 */
-#define                     nFLG2  0x0       
 #define                      FLG3  0x800      /* Slave Select Value 3 */
-#define                     nFLG3  0x0       
 
 /* Bit masks for SPIx_STAT */
 
 #define                     TXCOL  0x40       /* Transmit Collision Error */
-#define                    nTXCOL  0x0       
 #define                       RXS  0x20       /* RDBR Data Buffer Status */
-#define                      nRXS  0x0       
 #define                      RBSY  0x10       /* Receive Error */
-#define                     nRBSY  0x0       
 #define                       TXS  0x8        /* TDBR Data Buffer Status */
-#define                      nTXS  0x0       
 #define                       TXE  0x4        /* Transmission Error */
-#define                      nTXE  0x0       
 #define                      MODF  0x2        /* Mode Fault Error */
-#define                     nMODF  0x0       
 #define                      SPIF  0x1        /* SPI Finished */
-#define                     nSPIF  0x0       
 
 /* Bit masks for SPIx_TDBR */
 
@@ -4028,9 +3129,7 @@
 
 #define                  PRESCALE  0x7f       /* Prescale Value */
 #define                   TWI_ENA  0x80       /* TWI Enable */
-#define                  nTWI_ENA  0x0       
 #define                      SCCB  0x200      /* Serial Camera Control Bus */
-#define                     nSCCB  0x0       
 
 /* Bit maskes for TWIx_CLKDIV */
 
@@ -4040,13 +3139,9 @@
 /* Bit maskes for TWIx_SLAVE_CTL */
 
 #define                       SEN  0x1        /* Slave Enable */
-#define                      nSEN  0x0       
 #define                    STDVAL  0x4        /* Slave Transmit Data Valid */
-#define                   nSTDVAL  0x0       
 #define                       NAK  0x8        /* Not Acknowledge */
-#define                      nNAK  0x0       
 #define                       GEN  0x10       /* General Call Enable */
-#define                      nGEN  0x0       
 
 /* Bit maskes for TWIx_SLAVE_ADDR */
 
@@ -4055,27 +3150,18 @@
 /* Bit maskes for TWIx_SLAVE_STAT */
 
 #define                      SDIR  0x1        /* Slave Transfer Direction */
-#define                     nSDIR  0x0       
 #define                     GCALL  0x2        /* General Call */
-#define                    nGCALL  0x0       
 
 /* Bit maskes for TWIx_MASTER_CTL */
 
 #define                       MEN  0x1        /* Master Mode Enable */
-#define                      nMEN  0x0       
 #define                      MDIR  0x4        /* Master Transfer Direction */
-#define                     nMDIR  0x0       
 #define                      FAST  0x8        /* Fast Mode */
-#define                     nFAST  0x0       
 #define                      STOP  0x10       /* Issue Stop Condition */
-#define                     nSTOP  0x0       
 #define                    RSTART  0x20       /* Repeat Start */
-#define                   nRSTART  0x0       
 #define                      DCNT  0x3fc0     /* Data Transfer Count */
 #define                    SDAOVR  0x4000     /* Serial Data Override */
-#define                   nSDAOVR  0x0       
 #define                    SCLOVR  0x8000     /* Serial Clock Override */
-#define                   nSCLOVR  0x0       
 
 /* Bit maskes for TWIx_MASTER_ADDR */
 
@@ -4084,34 +3170,21 @@
 /* Bit maskes for TWIx_MASTER_STAT */
 
 #define                     MPROG  0x1        /* Master Transfer in Progress */
-#define                    nMPROG  0x0       
 #define                   LOSTARB  0x2        /* Lost Arbitration */
-#define                  nLOSTARB  0x0       
 #define                      ANAK  0x4        /* Address Not Acknowledged */
-#define                     nANAK  0x0       
 #define                      DNAK  0x8        /* Data Not Acknowledged */
-#define                     nDNAK  0x0       
 #define                  BUFRDERR  0x10       /* Buffer Read Error */
-#define                 nBUFRDERR  0x0       
 #define                  BUFWRERR  0x20       /* Buffer Write Error */
-#define                 nBUFWRERR  0x0       
 #define                    SDASEN  0x40       /* Serial Data Sense */
-#define                   nSDASEN  0x0       
 #define                    SCLSEN  0x80       /* Serial Clock Sense */
-#define                   nSCLSEN  0x0       
 #define                   BUSBUSY  0x100      /* Bus Busy */
-#define                  nBUSBUSY  0x0       
 
 /* Bit maskes for TWIx_FIFO_CTL */
 
 #define                  XMTFLUSH  0x1        /* Transmit Buffer Flush */
-#define                 nXMTFLUSH  0x0       
 #define                  RCVFLUSH  0x2        /* Receive Buffer Flush */
-#define                 nRCVFLUSH  0x0       
 #define                 XMTINTLEN  0x4        /* Transmit Buffer Interrupt Length */
-#define                nXMTINTLEN  0x0       
 #define                 RCVINTLEN  0x8        /* Receive Buffer Interrupt Length */
-#define                nRCVINTLEN  0x0       
 
 /* Bit maskes for TWIx_FIFO_STAT */
 
@@ -4121,40 +3194,24 @@
 /* Bit maskes for TWIx_INT_MASK */
 
 #define                    SINITM  0x1        /* Slave Transfer Initiated Interrupt Mask */
-#define                   nSINITM  0x0       
 #define                    SCOMPM  0x2        /* Slave Transfer Complete Interrupt Mask */
-#define                   nSCOMPM  0x0       
 #define                     SERRM  0x4        /* Slave Transfer Error Interrupt Mask */
-#define                    nSERRM  0x0       
 #define                     SOVFM  0x8        /* Slave Overflow Interrupt Mask */
-#define                    nSOVFM  0x0       
 #define                    MCOMPM  0x10       /* Master Transfer Complete Interrupt Mask */
-#define                   nMCOMPM  0x0       
 #define                     MERRM  0x20       /* Master Transfer Error Interrupt Mask */
-#define                    nMERRM  0x0       
 #define                  XMTSERVM  0x40       /* Transmit FIFO Service Interrupt Mask */
-#define                 nXMTSERVM  0x0       
 #define                  RCVSERVM  0x80       /* Receive FIFO Service Interrupt Mask */
-#define                 nRCVSERVM  0x0       
 
 /* Bit maskes for TWIx_INT_STAT */
 
 #define                     SINIT  0x1        /* Slave Transfer Initiated */
-#define                    nSINIT  0x0       
 #define                     SCOMP  0x2        /* Slave Transfer Complete */
-#define                    nSCOMP  0x0       
 #define                      SERR  0x4        /* Slave Transfer Error */
-#define                     nSERR  0x0       
 #define                      SOVF  0x8        /* Slave Overflow */
-#define                     nSOVF  0x0       
 #define                     MCOMP  0x10       /* Master Transfer Complete */
-#define                    nMCOMP  0x0       
 #define                      MERR  0x20       /* Master Transfer Error */
-#define                     nMERR  0x0       
 #define                   XMTSERV  0x40       /* Transmit FIFO Service */
-#define                  nXMTSERV  0x0       
 #define                   RCVSERV  0x80       /* Receive FIFO Service */
-#define                  nRCVSERV  0x0       
 
 /* Bit maskes for TWIx_XMT_DATA8 */
 
@@ -4175,81 +3232,51 @@
 /* Bit masks for SPORTx_TCR1 */
 
 #define                     TCKFE  0x4000     /* Clock Falling Edge Select */
-#define                    nTCKFE  0x0       
 #define                     LATFS  0x2000     /* Late Transmit Frame Sync */
-#define                    nLATFS  0x0       
 #define                      LTFS  0x1000     /* Low Transmit Frame Sync Select */
-#define                     nLTFS  0x0       
 #define                     DITFS  0x800      /* Data-Independent Transmit Frame Sync Select */
-#define                    nDITFS  0x0       
 #define                      TFSR  0x400      /* Transmit Frame Sync Required Select */
-#define                     nTFSR  0x0       
 #define                      ITFS  0x200      /* Internal Transmit Frame Sync Select */
-#define                     nITFS  0x0       
 #define                    TLSBIT  0x10       /* Transmit Bit Order */
-#define                   nTLSBIT  0x0       
 #define                    TDTYPE  0xc        /* Data Formatting Type Select */
 #define                     ITCLK  0x2        /* Internal Transmit Clock Select */
-#define                    nITCLK  0x0       
 #define                     TSPEN  0x1        /* Transmit Enable */
-#define                    nTSPEN  0x0       
 
 /* Bit masks for SPORTx_TCR2 */
 
 #define                     TRFST  0x400      /* Left/Right Order */
-#define                    nTRFST  0x0       
 #define                     TSFSE  0x200      /* Transmit Stereo Frame Sync Enable */
-#define                    nTSFSE  0x0       
 #define                      TXSE  0x100      /* TxSEC Enable */
-#define                     nTXSE  0x0       
 #define                    SLEN_T  0x1f       /* SPORT Word Length */
 
 /* Bit masks for SPORTx_RCR1 */
 
 #define                     RCKFE  0x4000     /* Clock Falling Edge Select */
-#define                    nRCKFE  0x0       
 #define                     LARFS  0x2000     /* Late Receive Frame Sync */
-#define                    nLARFS  0x0       
 #define                      LRFS  0x1000     /* Low Receive Frame Sync Select */
-#define                     nLRFS  0x0       
 #define                      RFSR  0x400      /* Receive Frame Sync Required Select */
-#define                     nRFSR  0x0       
 #define                      IRFS  0x200      /* Internal Receive Frame Sync Select */
-#define                     nIRFS  0x0       
 #define                    RLSBIT  0x10       /* Receive Bit Order */
-#define                   nRLSBIT  0x0       
 #define                    RDTYPE  0xc        /* Data Formatting Type Select */
 #define                     IRCLK  0x2        /* Internal Receive Clock Select */
-#define                    nIRCLK  0x0       
 #define                     RSPEN  0x1        /* Receive Enable */
-#define                    nRSPEN  0x0       
 
 /* Bit masks for SPORTx_RCR2 */
 
 #define                     RRFST  0x400      /* Left/Right Order */
-#define                    nRRFST  0x0       
 #define                     RSFSE  0x200      /* Receive Stereo Frame Sync Enable */
-#define                    nRSFSE  0x0       
 #define                      RXSE  0x100      /* RxSEC Enable */
-#define                     nRXSE  0x0       
 #define                    SLEN_R  0x1f       /* SPORT Word Length */
 
 /* Bit masks for SPORTx_STAT */
 
 #define                     TXHRE  0x40       /* Transmit Hold Register Empty */
-#define                    nTXHRE  0x0       
 #define                      TOVF  0x20       /* Sticky Transmit Overflow Status */
-#define                     nTOVF  0x0       
 #define                      TUVF  0x10       /* Sticky Transmit Underflow Status */
-#define                     nTUVF  0x0       
 #define                       TXF  0x8        /* Transmit FIFO Full Status */
-#define                      nTXF  0x0       
 #define                      ROVF  0x4        /* Sticky Receive Overflow Status */
-#define                     nROVF  0x0       
 #define                      RUVF  0x2        /* Sticky Receive Underflow Status */
-#define                     nRUVF  0x0       
 #define                      RXNE  0x1        /* Receive FIFO Not Empty Status */
-#define                     nRXNE  0x0       
 
 /* Bit masks for SPORTx_MCMC1 */
 
@@ -4260,13 +3287,9 @@
 
 #define                       MFD  0xf000     /* Multi channel Frame Delay */
 #define                      FSDR  0x80       /* Frame Sync to Data Relationship */
-#define                     nFSDR  0x0       
 #define                     MCMEM  0x10       /* Multi channel Frame Mode Enable */
-#define                    nMCMEM  0x0       
 #define                   MCDRXPE  0x8        /* Multi channel DMA Receive Packing */
-#define                  nMCDRXPE  0x0       
 #define                   MCDTXPE  0x4        /* Multi channel DMA Transmit Packing */
-#define                  nMCDTXPE  0x0       
 #define                     MCCRM  0x3        /* 2X Clock Recovery Mode */
 
 /* Bit masks for SPORTx_CHNL */
@@ -4280,115 +3303,59 @@
 #define                       WLS  0x3        /* Word Length Select */
 #endif
 #define                       STB  0x4        /* Stop Bits */
-#define                      nSTB  0x0       
 #define                       PEN  0x8        /* Parity Enable */
-#define                      nPEN  0x0       
 #define                       EPS  0x10       /* Even Parity Select */
-#define                      nEPS  0x0       
 #define                       STP  0x20       /* Sticky Parity */
-#define                      nSTP  0x0       
 #define                        SB  0x40       /* Set Break */
-#define                       nSB  0x0       
 
 /* Bit masks for UARTx_MCR */
 
 #define                      XOFF  0x1        /* Transmitter Off */
-#define                     nXOFF  0x0       
 #define                      MRTS  0x2        /* Manual Request To Send */
-#define                     nMRTS  0x0       
 #define                      RFIT  0x4        /* Receive FIFO IRQ Threshold */
-#define                     nRFIT  0x0       
 #define                      RFRT  0x8        /* Receive FIFO RTS Threshold */
-#define                     nRFRT  0x0       
 #define                  LOOP_ENA  0x10       /* Loopback Mode Enable */
-#define                 nLOOP_ENA  0x0       
 #define                     FCPOL  0x20       /* Flow Control Pin Polarity */
-#define                    nFCPOL  0x0       
 #define                      ARTS  0x40       /* Automatic Request To Send */
-#define                     nARTS  0x0       
 #define                      ACTS  0x80       /* Automatic Clear To Send */
-#define                     nACTS  0x0       
 
 /* Bit masks for UARTx_LSR */
 
 #define                        DR  0x1        /* Data Ready */
-#define                       nDR  0x0       
 #define                        OE  0x2        /* Overrun Error */
-#define                       nOE  0x0       
 #define                        PE  0x4        /* Parity Error */
-#define                       nPE  0x0       
 #define                        FE  0x8        /* Framing Error */
-#define                       nFE  0x0       
 #define                        BI  0x10       /* Break Interrupt */
-#define                       nBI  0x0       
 #define                      THRE  0x20       /* THR Empty */
-#define                     nTHRE  0x0       
 #define                      TEMT  0x40       /* Transmitter Empty */
-#define                     nTEMT  0x0       
 #define                       TFI  0x80       /* Transmission Finished Indicator */
-#define                      nTFI  0x0       
 
 /* Bit masks for UARTx_MSR */
 
 #define                      SCTS  0x1        /* Sticky CTS */
-#define                     nSCTS  0x0       
 #define                       CTS  0x10       /* Clear To Send */
-#define                      nCTS  0x0       
 #define                      RFCS  0x20       /* Receive FIFO Count Status */
-#define                     nRFCS  0x0       
 
-/* Bit masks for UARTx_IER_SET */
+/* Bit masks for UARTx_IER_SET & UARTx_IER_CLEAR */
 
-#define                   ERBFI_S  0x1        /* Enable Receive Buffer Full Interrupt */
-#define                  nERBFI_S  0x0       
-#define                   ETBEI_S  0x2        /* Enable Transmit Buffer Empty Interrupt */
-#define                  nETBEI_S  0x0       
-#define                    ELSI_S  0x4        /* Enable Receive Status Interrupt */
-#define                   nELSI_S  0x0       
-#define                   EDSSI_S  0x8        /* Enable Modem Status Interrupt */
-#define                  nEDSSI_S  0x0       
-#define                  EDTPTI_S  0x10       /* Enable DMA Transmit PIRQ Interrupt */
-#define                 nEDTPTI_S  0x0       
-#define                    ETFI_S  0x20       /* Enable Transmission Finished Interrupt */
-#define                   nETFI_S  0x0       
-#define                   ERFCI_S  0x40       /* Enable Receive FIFO Count Interrupt */
-#define                  nERFCI_S  0x0       
-
-/* Bit masks for UARTx_IER_CLEAR */
-
-#define                   ERBFI_C  0x1        /* Enable Receive Buffer Full Interrupt */
-#define                  nERBFI_C  0x0       
-#define                   ETBEI_C  0x2        /* Enable Transmit Buffer Empty Interrupt */
-#define                  nETBEI_C  0x0       
-#define                    ELSI_C  0x4        /* Enable Receive Status Interrupt */
-#define                   nELSI_C  0x0       
-#define                   EDSSI_C  0x8        /* Enable Modem Status Interrupt */
-#define                  nEDSSI_C  0x0       
-#define                  EDTPTI_C  0x10       /* Enable DMA Transmit PIRQ Interrupt */
-#define                 nEDTPTI_C  0x0       
-#define                    ETFI_C  0x20       /* Enable Transmission Finished Interrupt */
-#define                   nETFI_C  0x0       
-#define                   ERFCI_C  0x40       /* Enable Receive FIFO Count Interrupt */
-#define                  nERFCI_C  0x0       
+#define                   ERBFI  0x1        /* Enable Receive Buffer Full Interrupt */
+#define                   ETBEI  0x2        /* Enable Transmit Buffer Empty Interrupt */
+#define                    ELSI  0x4        /* Enable Receive Status Interrupt */
+#define                   EDSSI  0x8        /* Enable Modem Status Interrupt */
+#define                  EDTPTI  0x10       /* Enable DMA Transmit PIRQ Interrupt */
+#define                    ETFI  0x20       /* Enable Transmission Finished Interrupt */
+#define                   ERFCI  0x40       /* Enable Receive FIFO Count Interrupt */
 
 /* Bit masks for UARTx_GCTL */
 
 #define                      UCEN  0x1        /* UART Enable */
-#define                     nUCEN  0x0       
 #define                      IREN  0x2        /* IrDA Mode Enable */
-#define                     nIREN  0x0       
 #define                     TPOLC  0x4        /* IrDA TX Polarity Change */
-#define                    nTPOLC  0x0       
 #define                     RPOLC  0x8        /* IrDA RX Polarity Change */
-#define                    nRPOLC  0x0       
 #define                       FPE  0x10       /* Force Parity Error */
-#define                      nFPE  0x0       
 #define                       FFE  0x20       /* Force Framing Error */
-#define                      nFFE  0x0       
 #define                      EDBO  0x40       /* Enable Divide-by-One */
-#define                     nEDBO  0x0       
 #define                     EGLSI  0x80       /* Enable Global LS Interrupt */
-#define                    nEGLSI  0x0       
 
 
 /* ******************************************* */
diff --git a/include/asm-blackfin/mach-bf548/dma.h b/include/asm-blackfin/mach-bf548/dma.h
index 5a334c8..fcc8b4c 100644
--- a/include/asm-blackfin/mach-bf548/dma.h
+++ b/include/asm-blackfin/mach-bf548/dma.h
@@ -44,7 +44,6 @@
 #define CH_UART1_TX 		9
 #define CH_ATAPI_RX		10
 #define CH_ATAPI_TX		11
-
 #define CH_EPPI0		12
 #define CH_EPPI1		13
 #define CH_EPPI2		14
@@ -58,6 +57,17 @@
 #define CH_SDH			22
 #define CH_SPI2			23
 
-#define MAX_BLACKFIN_DMA_CHANNEL CH_SPI2
+#define CH_MEM_STREAM0_DEST	24
+#define CH_MEM_STREAM0_SRC	25
+#define CH_MEM_STREAM1_DEST	26
+#define CH_MEM_STREAM1_SRC	27
+#define CH_MEM_STREAM2_DEST	28
+#define CH_MEM_STREAM2_SRC	29
+#define CH_MEM_STREAM3_DEST	30
+#define CH_MEM_STREAM3_SRC	31
 
+#define MAX_BLACKFIN_DMA_CHANNEL 32
+
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
 #endif
diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/include/asm-blackfin/mach-bf548/gpio.h
new file mode 100644
index 0000000..4528942
--- /dev/null
+++ b/include/asm-blackfin/mach-bf548/gpio.h
@@ -0,0 +1,212 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/gpio.h
+ * Based on:
+ * Author:	 Michael Hennerich (hennerich@blackfin.uclinux.org)
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+
+
+#define GPIO_PA0	0
+#define GPIO_PA1	1
+#define GPIO_PA2	2
+#define GPIO_PA3	3
+#define GPIO_PA4	4
+#define GPIO_PA5	5
+#define GPIO_PA6	6
+#define GPIO_PA7	7
+#define GPIO_PA8	8
+#define GPIO_PA9	9
+#define GPIO_PA10	10
+#define GPIO_PA11	11
+#define GPIO_PA12	12
+#define GPIO_PA13	13
+#define GPIO_PA14	14
+#define GPIO_PA15	15
+#define GPIO_PB0	16
+#define GPIO_PB1	17
+#define GPIO_PB2	18
+#define GPIO_PB3	19
+#define GPIO_PB4	20
+#define GPIO_PB5	21
+#define GPIO_PB6	22
+#define GPIO_PB7	23
+#define GPIO_PB8	24
+#define GPIO_PB9	25
+#define GPIO_PB10	26
+#define GPIO_PB11	27
+#define GPIO_PB12	28
+#define GPIO_PB13	29
+#define GPIO_PB14	30
+#define GPIO_PB15	31	/* N/A */
+#define GPIO_PC0	32
+#define GPIO_PC1	33
+#define GPIO_PC2	34
+#define GPIO_PC3	35
+#define GPIO_PC4	36
+#define GPIO_PC5	37
+#define GPIO_PC6	38
+#define GPIO_PC7	39
+#define GPIO_PC8	40
+#define GPIO_PC9	41
+#define GPIO_PC10	42
+#define GPIO_PC11	43
+#define GPIO_PC12	44
+#define GPIO_PC13	45
+#define GPIO_PC14	46	/* N/A */
+#define GPIO_PC15	47	/* N/A */
+#define GPIO_PD0	48
+#define GPIO_PD1	49
+#define GPIO_PD2	50
+#define GPIO_PD3	51
+#define GPIO_PD4	52
+#define GPIO_PD5	53
+#define GPIO_PD6	54
+#define GPIO_PD7	55
+#define GPIO_PD8	56
+#define GPIO_PD9	57
+#define GPIO_PD10	58
+#define GPIO_PD11	59
+#define GPIO_PD12	60
+#define GPIO_PD13	61
+#define GPIO_PD14	62
+#define GPIO_PD15	63
+#define GPIO_PE0	64
+#define GPIO_PE1	65
+#define GPIO_PE2	66
+#define GPIO_PE3	67
+#define GPIO_PE4	68
+#define GPIO_PE5	69
+#define GPIO_PE6	70
+#define GPIO_PE7	71
+#define GPIO_PE8	72
+#define GPIO_PE9	73
+#define GPIO_PE10	74
+#define GPIO_PE11	75
+#define GPIO_PE12	76
+#define GPIO_PE13	77
+#define GPIO_PE14	78
+#define GPIO_PE15	79
+#define GPIO_PF0	80
+#define GPIO_PF1	81
+#define GPIO_PF2	82
+#define GPIO_PF3	83
+#define GPIO_PF4	84
+#define GPIO_PF5	85
+#define GPIO_PF6	86
+#define GPIO_PF7	87
+#define GPIO_PF8	88
+#define GPIO_PF9	89
+#define GPIO_PF10	90
+#define GPIO_PF11	91
+#define GPIO_PF12	92
+#define GPIO_PF13	93
+#define GPIO_PF14	94
+#define GPIO_PF15	95
+#define GPIO_PG0	96
+#define GPIO_PG1	97
+#define GPIO_PG2	98
+#define GPIO_PG3	99
+#define GPIO_PG4	100
+#define GPIO_PG5	101
+#define GPIO_PG6	102
+#define GPIO_PG7	103
+#define GPIO_PG8	104
+#define GPIO_PG9	105
+#define GPIO_PG10	106
+#define GPIO_PG11	107
+#define GPIO_PG12	108
+#define GPIO_PG13	109
+#define GPIO_PG14	110
+#define GPIO_PG15	111
+#define GPIO_PH0	112
+#define GPIO_PH1	113
+#define GPIO_PH2	114
+#define GPIO_PH3	115
+#define GPIO_PH4	116
+#define GPIO_PH5	117
+#define GPIO_PH6	118
+#define GPIO_PH7	119
+#define GPIO_PH8	120
+#define GPIO_PH9	121
+#define GPIO_PH10	122
+#define GPIO_PH11	123
+#define GPIO_PH12	124
+#define GPIO_PH13	125
+#define GPIO_PH14	126	/* N/A */
+#define GPIO_PH15	127	/* N/A */
+#define GPIO_PI0	128
+#define GPIO_PI1	129
+#define GPIO_PI2	130
+#define GPIO_PI3	131
+#define GPIO_PI4	132
+#define GPIO_PI5	133
+#define GPIO_PI6	134
+#define GPIO_PI7	135
+#define GPIO_PI8	136
+#define GPIO_PI9	137
+#define GPIO_PI10	138
+#define GPIO_PI11	139
+#define GPIO_PI12	140
+#define GPIO_PI13	141
+#define GPIO_PI14	142
+#define GPIO_PI15	143
+#define GPIO_PJ0	144
+#define GPIO_PJ1	145
+#define GPIO_PJ2	146
+#define GPIO_PJ3	147
+#define GPIO_PJ4	148
+#define GPIO_PJ5	149
+#define GPIO_PJ6	150
+#define GPIO_PJ7	151
+#define GPIO_PJ8	152
+#define GPIO_PJ9	153
+#define GPIO_PJ10	154
+#define GPIO_PJ11	155
+#define GPIO_PJ12	156
+#define GPIO_PJ13	157
+#define GPIO_PJ14	158
+#define GPIO_PJ15	159
+
+#define MAX_BLACKFIN_GPIOS 160
+
+struct gpio_port_t {
+	unsigned short port_fer;
+	unsigned short dummy1;
+	unsigned short port_data;
+	unsigned short dummy2;
+	unsigned short port_set;
+	unsigned short dummy3;
+	unsigned short port_clear;
+	unsigned short dummy4;
+	unsigned short port_dir_set;
+	unsigned short dummy5;
+	unsigned short port_dir_clear;
+	unsigned short dummy6;
+	unsigned short port_inen;
+	unsigned short dummy7;
+	unsigned int port_mux;
+};
+
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h
index a7f6703..93f5db0 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/include/asm-blackfin/mach-bf548/irq.h
@@ -51,7 +51,7 @@
                  (lowest priority)  IVG15       32 *
  */
 
-#define NR_PERI_INTS    32
+#define NR_PERI_INTS    (32 * 3)
 
 /* The ABSTRACT IRQ definitions */
 /** the first seven of the following are fixed, the rest you change if you need to **/
@@ -92,7 +92,7 @@
 #define IRQ_DMAC1_ERR	BFIN_IRQ(24)	/* DMAC1 Status (Error) Interrupt */
 #define IRQ_SPORT2_ERR	BFIN_IRQ(25)	/* SPORT2 Error Interrupt */
 #define IRQ_SPORT3_ERR	BFIN_IRQ(26)	/* SPORT3 Error Interrupt */
-#define IRQ_MXVR	BFIN_IRQ(27)	/* SPORT3 Error Interrupt */
+#define IRQ_MXVR_DATA	BFIN_IRQ(27)	/* MXVR Data Interrupt */
 #define IRQ_SPI1_ERR	BFIN_IRQ(28)	/* SPI1 Status (Error) Interrupt */
 #define IRQ_SPI2_ERR	BFIN_IRQ(29)	/* SPI2 Status (Error) Interrupt */
 #define IRQ_UART1_ERR	BFIN_IRQ(30)	/* UART1 Status (Error) Interrupt */
@@ -102,8 +102,8 @@
 #define IRQ_SPORT2_TX	BFIN_IRQ(34)	/* SPORT2 TX (DMA19) Interrupt */
 #define IRQ_SPORT3_RX	BFIN_IRQ(35)	/* SPORT3 RX (DMA20) Interrupt */
 #define IRQ_SPORT3_TX	BFIN_IRQ(36)	/* SPORT3 TX (DMA21) Interrupt */
-#define IRQ_EPP1	BFIN_IRQ(37)	/* EPP1 (DMA13) Interrupt */
-#define IRQ_EPP2	BFIN_IRQ(38)	/* EPP2 (DMA14) Interrupt */
+#define IRQ_EPPI1	BFIN_IRQ(37)	/* EPP1 (DMA13) Interrupt */
+#define IRQ_EPPI2	BFIN_IRQ(38)	/* EPP2 (DMA14) Interrupt */
 #define IRQ_SPI1	BFIN_IRQ(39)	/* SPI1 (DMA5) Interrupt */
 #define IRQ_SPI2	BFIN_IRQ(40)	/* SPI2 (DMA23) Interrupt */
 #define IRQ_UART1_RX	BFIN_IRQ(41)	/* UART1 RX (DMA8) Interrupt */
@@ -143,14 +143,14 @@
 #define IRQ_USB_INT2	BFIN_IRQ(77)	/* USB INT2 Interrupt */
 #define IRQ_USB_DMA	BFIN_IRQ(78)	/* USB DMA Interrupt */
 #define IRQ_OPTSEC	BFIN_IRQ(79)	/* OTPSEC Interrupt */
-#define IRQ_TMR0	BFIN_IRQ(86)	/* Timer 0 Interrupt */
-#define IRQ_TMR1	BFIN_IRQ(87)	/* Timer 1 Interrupt */
-#define IRQ_TMR2	BFIN_IRQ(88)	/* Timer 2 Interrupt */
-#define IRQ_TMR3	BFIN_IRQ(89)	/* Timer 3 Interrupt */
-#define IRQ_TMR4	BFIN_IRQ(90)	/* Timer 4 Interrupt */
-#define IRQ_TMR5	BFIN_IRQ(91)	/* Timer 5 Interrupt */
-#define IRQ_TMR6	BFIN_IRQ(92)	/* Timer 6 Interrupt */
-#define IRQ_TMR7	BFIN_IRQ(93)	/* Timer 7 Interrupt */
+#define IRQ_TIMER0	BFIN_IRQ(86)	/* Timer 0 Interrupt */
+#define IRQ_TIMER1	BFIN_IRQ(87)	/* Timer 1 Interrupt */
+#define IRQ_TIMER2	BFIN_IRQ(88)	/* Timer 2 Interrupt */
+#define IRQ_TIMER3	BFIN_IRQ(89)	/* Timer 3 Interrupt */
+#define IRQ_TIMER4	BFIN_IRQ(90)	/* Timer 4 Interrupt */
+#define IRQ_TIMER5	BFIN_IRQ(91)	/* Timer 5 Interrupt */
+#define IRQ_TIMER6	BFIN_IRQ(92)	/* Timer 6 Interrupt */
+#define IRQ_TIMER7	BFIN_IRQ(93)	/* Timer 7 Interrupt */
 #define IRQ_PINT2	BFIN_IRQ(94)	/* PINT2 Interrupt */
 #define IRQ_PINT3	BFIN_IRQ(95)	/* PINT3 Interrupt */
 
@@ -248,9 +248,9 @@
 
 
 #ifdef CONFIG_IRQCHIP_DEMUX_GPIO
-#define NR_IRQS     (IRQ_PH15+1)
+#define NR_IRQS     (IRQ_PE15+1)
 #else
-#define NR_IRQS     (IRQ_UART1_ERROR+1)
+#define NR_IRQS     (SYS_IRQS+1)
 #endif
 
 #define IVG7            7
@@ -263,44 +263,116 @@
 #define IVG14           14
 #define IVG15           15
 
-/* IAR0 BIT FIELDS*/
-#define IRQ_PLL_WAKEUP_POS  0
-#define IRQ_DMA_ERROR_POS   4
-#define IRQ_ERROR_POS       8
-#define IRQ_RTC_POS         12
-#define IRQ_PPI_POS         16
-#define IRQ_SPORT0_RX_POS   20
-#define IRQ_SPORT0_TX_POS   24
-#define IRQ_SPORT1_RX_POS   28
+/* IAR0 BIT FIELDS */
+#define IRQ_PLL_WAKEUP_POS	0
+#define IRQ_DMAC0_ERR_POS	4
+#define IRQ_EPPI0_ERR_POS	8
+#define IRQ_SPORT0_ERR_POS	12
+#define IRQ_SPORT1_ERR_POS	16
+#define IRQ_SPI0_ERR_POS	20
+#define IRQ_UART0_ERR_POS	24
+#define IRQ_RTC_POS		28
 
-/* IAR1 BIT FIELDS*/
-#define IRQ_SPORT1_TX_POS   0
-#define IRQ_TWI_POS         4
-#define IRQ_SPI_POS         8
-#define IRQ_UART0_RX_POS    12
-#define IRQ_UART0_TX_POS    16
-#define IRQ_UART1_RX_POS    20
-#define IRQ_UART1_TX_POS    24
-#define IRQ_CAN_RX_POS      28
+/* IAR1 BIT FIELDS */
+#define IRQ_EPPI0_POS		0
+#define IRQ_SPORT0_RX_POS	4
+#define IRQ_SPORT0_TX_POS	8
+#define IRQ_SPORT1_RX_POS	12
+#define IRQ_SPORT1_TX_POS	16
+#define IRQ_SPI0_POS		20
+#define IRQ_UART0_RX_POS	24
+#define IRQ_UART0_TX_POS	28
 
-/* IAR2 BIT FIELDS*/
-#define IRQ_CAN_TX_POS      0
-#define IRQ_MAC_RX_POS      4
-#define IRQ_MAC_TX_POS      8
-#define IRQ_TMR0_POS        12
-#define IRQ_TMR1_POS        16
-#define IRQ_TMR2_POS        20
-#define IRQ_TMR3_POS        24
-#define IRQ_TMR4_POS        28
+/* IAR2 BIT FIELDS */
+#define IRQ_TIMER8_POS		0
+#define IRQ_TIMER9_POS		4
+#define IRQ_TIMER10_POS		8
+#define IRQ_PINT0_POS		12
+#define IRQ_PINT1_POS		16
+#define IRQ_MDMAS0_POS		20
+#define IRQ_MDMAS1_POS		24
+#define IRQ_WATCHDOG_POS	28
 
-/* IAR3 BIT FIELDS*/
-#define IRQ_TMR5_POS        0
-#define IRQ_TMR6_POS        4
-#define IRQ_TMR7_POS        8
-#define IRQ_PROG_INTA_POS   12
-#define IRQ_PORTG_INTB_POS   16
-#define IRQ_MEM_DMA0_POS    20
-#define IRQ_MEM_DMA1_POS    24
-#define IRQ_WATCH_POS       28
+/* IAR3 BIT FIELDS */
+#define IRQ_DMAC1_ERR_POS	0
+#define IRQ_SPORT2_ERR_POS	4
+#define IRQ_SPORT3_ERR_POS	8
+#define IRQ_MXVR_DATA_POS	12
+#define IRQ_SPI1_ERR_POS	16
+#define IRQ_SPI2_ERR_POS	20
+#define IRQ_UART1_ERR_POS	24
+#define IRQ_UART2_ERR_POS	28
 
-#endif				/* _BF537_IRQ_H_ */
+/* IAR4 BIT FILEDS */
+#define IRQ_CAN0_ERR_POS	0
+#define IRQ_SPORT2_RX_POS	4
+#define IRQ_SPORT2_TX_POS	8
+#define IRQ_SPORT3_RX_POS	12
+#define IRQ_SPORT3_TX_POS	16
+#define IRQ_EPPI1_POS		20
+#define IRQ_EPPI2_POS		24
+#define IRQ_SPI1_POS		28
+
+/* IAR5 BIT FIELDS */
+#define IRQ_SPI2_POS		0
+#define IRQ_UART1_RX_POS	4
+#define IRQ_UART1_TX_POS	8
+#define IRQ_ATAPI_RX_POS	12
+#define IRQ_ATAPI_TX_POS	16
+#define IRQ_TWI0_POS		20
+#define IRQ_TWI1_POS		24
+#define IRQ_CAN0_RX_POS		28
+
+/* IAR6 BIT FIELDS */
+#define IRQ_CAN0_TX_POS		0
+#define IRQ_MDMAS2_POS		4
+#define IRQ_MDMAS3_POS		8
+#define IRQ_MXVR_ERR_POS	12
+#define IRQ_MXVR_MSG_POS	16
+#define IRQ_MXVR_PKT_POS	20
+#define IRQ_EPPI1_ERR_POS	24
+#define IRQ_EPPI2_ERR_POS	28
+
+/* IAR7 BIT FIELDS */
+#define IRQ_UART3_ERR_POS	0
+#define IRQ_HOST_ERR_POS	4
+#define IRQ_PIXC_ERR_POS	12
+#define IRQ_NFC_ERR_POS		16
+#define IRQ_ATAPI_ERR_POS	20
+#define IRQ_CAN1_ERR_POS	24
+#define IRQ_HS_DMA_ERR_POS	28
+
+/* IAR8 BIT FIELDS */
+#define IRQ_PIXC_IN0_POS	0
+#define IRQ_PIXC_IN1_POS	4
+#define IRQ_PIXC_OUT_POS	8
+#define IRQ_SDH_POS		12
+#define IRQ_CNT_POS		16
+#define IRQ_KEY_POS		20
+#define IRQ_CAN1_RX_POS		24
+#define IRQ_CAN1_TX_POS		28
+
+/* IAR9 BIT FIELDS */
+#define IRQ_SDH_MASK0_POS	0
+#define IRQ_SDH_MASK1_POS	4
+#define IRQ_USB_INT0_POS	12
+#define IRQ_USB_INT1_POS	16
+#define IRQ_USB_INT2_POS	20
+#define IRQ_USB_DMA_POS		24
+#define IRQ_OTPSEC_POS		28
+
+/* IAR10 BIT FIELDS */
+#define IRQ_TIMER0_POS		24
+#define IRQ_TIMER1_POS		28
+
+/* IAR11 BIT FIELDS */
+#define IRQ_TIMER2_POS		0
+#define IRQ_TIMER3_POS		4
+#define IRQ_TIMER4_POS		8
+#define IRQ_TIMER5_POS		12
+#define IRQ_TIMER6_POS		16
+#define IRQ_TIMER7_POS		20
+#define IRQ_PINT2_POS		24
+#define IRQ_PINT3_POS		28
+
+#endif /* _BF548_IRQ_H_ */
diff --git a/include/asm-blackfin/mach-bf561/dma.h b/include/asm-blackfin/mach-bf561/dma.h
index 21d9820..766334b 100644
--- a/include/asm-blackfin/mach-bf561/dma.h
+++ b/include/asm-blackfin/mach-bf561/dma.h
@@ -32,4 +32,7 @@
 #define CH_IMEM_STREAM1_SRC	34
 #define CH_IMEM_STREAM1_DEST	35
 
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
+
 #endif