| /* |
| smsc47m192.c - Support for hardware monitoring block of |
| SMSC LPC47M192 and compatible Super I/O chips |
| |
| Copyright (C) 2006 Hartmut Rick <linux@rick.claranet.de> |
| |
| Derived from lm78.c and other chip drivers. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/hwmon-vid.h> |
| #include <linux/err.h> |
| #include <linux/sysfs.h> |
| #include <linux/mutex.h> |
| |
| /* Addresses to scan */ |
| static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; |
| |
| /* Insmod parameters */ |
| I2C_CLIENT_INSMOD_1(smsc47m192); |
| |
| /* SMSC47M192 registers */ |
| #define SMSC47M192_REG_IN(nr) ((nr)<6 ? (0x20 + (nr)) : \ |
| (0x50 + (nr) - 6)) |
| #define SMSC47M192_REG_IN_MAX(nr) ((nr)<6 ? (0x2b + (nr) * 2) : \ |
| (0x54 + (((nr) - 6) * 2))) |
| #define SMSC47M192_REG_IN_MIN(nr) ((nr)<6 ? (0x2c + (nr) * 2) : \ |
| (0x55 + (((nr) - 6) * 2))) |
| static u8 SMSC47M192_REG_TEMP[3] = { 0x27, 0x26, 0x52 }; |
| static u8 SMSC47M192_REG_TEMP_MAX[3] = { 0x39, 0x37, 0x58 }; |
| static u8 SMSC47M192_REG_TEMP_MIN[3] = { 0x3A, 0x38, 0x59 }; |
| #define SMSC47M192_REG_TEMP_OFFSET(nr) ((nr)==2 ? 0x1e : 0x1f) |
| #define SMSC47M192_REG_ALARM1 0x41 |
| #define SMSC47M192_REG_ALARM2 0x42 |
| #define SMSC47M192_REG_VID 0x47 |
| #define SMSC47M192_REG_VID4 0x49 |
| #define SMSC47M192_REG_CONFIG 0x40 |
| #define SMSC47M192_REG_SFR 0x4f |
| #define SMSC47M192_REG_COMPANY_ID 0x3e |
| #define SMSC47M192_REG_VERSION 0x3f |
| |
| /* generalised scaling with integer rounding */ |
| static inline int SCALE(long val, int mul, int div) |
| { |
| if (val < 0) |
| return (val * mul - div / 2) / div; |
| else |
| return (val * mul + div / 2) / div; |
| } |
| |
| /* Conversions */ |
| |
| /* smsc47m192 internally scales voltage measurements */ |
| static const u16 nom_mv[] = { 2500, 2250, 3300, 5000, 12000, 3300, 1500, 1800 }; |
| |
| static inline unsigned int IN_FROM_REG(u8 reg, int n) |
| { |
| return SCALE(reg, nom_mv[n], 192); |
| } |
| |
| static inline u8 IN_TO_REG(unsigned long val, int n) |
| { |
| return SENSORS_LIMIT(SCALE(val, 192, nom_mv[n]), 0, 255); |
| } |
| |
| /* TEMP: 0.001 degC units (-128C to +127C) |
| REG: 1C/bit, two's complement */ |
| static inline s8 TEMP_TO_REG(int val) |
| { |
| return SENSORS_LIMIT(SCALE(val, 1, 1000), -128000, 127000); |
| } |
| |
| static inline int TEMP_FROM_REG(s8 val) |
| { |
| return val * 1000; |
| } |
| |
| struct smsc47m192_data { |
| struct device *hwmon_dev; |
| struct mutex update_lock; |
| char valid; /* !=0 if following fields are valid */ |
| unsigned long last_updated; /* In jiffies */ |
| |
| u8 in[8]; /* Register value */ |
| u8 in_max[8]; /* Register value */ |
| u8 in_min[8]; /* Register value */ |
| s8 temp[3]; /* Register value */ |
| s8 temp_max[3]; /* Register value */ |
| s8 temp_min[3]; /* Register value */ |
| s8 temp_offset[3]; /* Register value */ |
| u16 alarms; /* Register encoding, combined */ |
| u8 vid; /* Register encoding, combined */ |
| u8 vrm; |
| }; |
| |
| static int smsc47m192_probe(struct i2c_client *client, |
| const struct i2c_device_id *id); |
| static int smsc47m192_detect(struct i2c_client *client, int kind, |
| struct i2c_board_info *info); |
| static int smsc47m192_remove(struct i2c_client *client); |
| static struct smsc47m192_data *smsc47m192_update_device(struct device *dev); |
| |
| static const struct i2c_device_id smsc47m192_id[] = { |
| { "smsc47m192", smsc47m192 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, smsc47m192_id); |
| |
| static struct i2c_driver smsc47m192_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = "smsc47m192", |
| }, |
| .probe = smsc47m192_probe, |
| .remove = smsc47m192_remove, |
| .id_table = smsc47m192_id, |
| .detect = smsc47m192_detect, |
| .address_data = &addr_data, |
| }; |
| |
| /* Voltages */ |
| static ssize_t show_in(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int nr = sensor_attr->index; |
| struct smsc47m192_data *data = smsc47m192_update_device(dev); |
| return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr], nr)); |
| } |
| |
| static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int nr = sensor_attr->index; |
| struct smsc47m192_data *data = smsc47m192_update_device(dev); |
| return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr], nr)); |
| } |
| |
| static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int nr = sensor_attr->index; |
| struct smsc47m192_data *data = smsc47m192_update_device(dev); |
| return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr], nr)); |
| } |
| |
| static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int nr = sensor_attr->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct smsc47m192_data *data = i2c_get_clientdata(client); |
| unsigned long val = simple_strtoul(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->in_min[nr] = IN_TO_REG(val, nr); |
| i2c_smbus_write_byte_data(client, SMSC47M192_REG_IN_MIN(nr), |
| data->in_min[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int nr = sensor_attr->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct smsc47m192_data *data = i2c_get_clientdata(client); |
| unsigned long val = simple_strtoul(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->in_max[nr] = IN_TO_REG(val, nr); |
| i2c_smbus_write_byte_data(client, SMSC47M192_REG_IN_MAX(nr), |
| data->in_max[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| #define show_in_offset(offset) \ |
| static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ |
| show_in, NULL, offset); \ |
| static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ |
| show_in_min, set_in_min, offset); \ |
| static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ |
| show_in_max, set_in_max, offset); |
| |
| show_in_offset(0) |
| show_in_offset(1) |
| show_in_offset(2) |
| show_in_offset(3) |
| show_in_offset(4) |
| show_in_offset(5) |
| show_in_offset(6) |
| show_in_offset(7) |
| |
| /* Temperatures */ |
| static ssize_t show_temp(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int nr = sensor_attr->index; |
| struct smsc47m192_data *data = smsc47m192_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); |
| } |
| |
| static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int nr = sensor_attr->index; |
| struct smsc47m192_data *data = smsc47m192_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr])); |
| } |
| |
| static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int nr = sensor_attr->index; |
| struct smsc47m192_data *data = smsc47m192_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr])); |
| } |
| |
| static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int nr = sensor_attr->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct smsc47m192_data *data = i2c_get_clientdata(client); |
| long val = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->temp_min[nr] = TEMP_TO_REG(val); |
| i2c_smbus_write_byte_data(client, SMSC47M192_REG_TEMP_MIN[nr], |
| data->temp_min[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int nr = sensor_attr->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct smsc47m192_data *data = i2c_get_clientdata(client); |
| long val = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->temp_max[nr] = TEMP_TO_REG(val); |
| i2c_smbus_write_byte_data(client, SMSC47M192_REG_TEMP_MAX[nr], |
| data->temp_max[nr]); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t show_temp_offset(struct device *dev, struct device_attribute |
| *attr, char *buf) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int nr = sensor_attr->index; |
| struct smsc47m192_data *data = smsc47m192_update_device(dev); |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_offset[nr])); |
| } |
| |
| static ssize_t set_temp_offset(struct device *dev, struct device_attribute |
| *attr, const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int nr = sensor_attr->index; |
| struct i2c_client *client = to_i2c_client(dev); |
| struct smsc47m192_data *data = i2c_get_clientdata(client); |
| u8 sfr = i2c_smbus_read_byte_data(client, SMSC47M192_REG_SFR); |
| long val = simple_strtol(buf, NULL, 10); |
| |
| mutex_lock(&data->update_lock); |
| data->temp_offset[nr] = TEMP_TO_REG(val); |
| if (nr>1) |
| i2c_smbus_write_byte_data(client, |
| SMSC47M192_REG_TEMP_OFFSET(nr), data->temp_offset[nr]); |
| else if (data->temp_offset[nr] != 0) { |
| /* offset[0] and offset[1] share the same register, |
| SFR bit 4 activates offset[0] */ |
| i2c_smbus_write_byte_data(client, SMSC47M192_REG_SFR, |
| (sfr & 0xef) | (nr==0 ? 0x10 : 0)); |
| data->temp_offset[1-nr] = 0; |
| i2c_smbus_write_byte_data(client, |
| SMSC47M192_REG_TEMP_OFFSET(nr), data->temp_offset[nr]); |
| } else if ((sfr & 0x10) == (nr==0 ? 0x10 : 0)) |
| i2c_smbus_write_byte_data(client, |
| SMSC47M192_REG_TEMP_OFFSET(nr), 0); |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| #define show_temp_index(index) \ |
| static SENSOR_DEVICE_ATTR(temp##index##_input, S_IRUGO, \ |
| show_temp, NULL, index-1); \ |
| static SENSOR_DEVICE_ATTR(temp##index##_min, S_IRUGO | S_IWUSR, \ |
| show_temp_min, set_temp_min, index-1); \ |
| static SENSOR_DEVICE_ATTR(temp##index##_max, S_IRUGO | S_IWUSR, \ |
| show_temp_max, set_temp_max, index-1); \ |
| static SENSOR_DEVICE_ATTR(temp##index##_offset, S_IRUGO | S_IWUSR, \ |
| show_temp_offset, set_temp_offset, index-1); |
| |
| show_temp_index(1) |
| show_temp_index(2) |
| show_temp_index(3) |
| |
| /* VID */ |
| static ssize_t show_vid(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct smsc47m192_data *data = smsc47m192_update_device(dev); |
| return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); |
| } |
| static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); |
| |
| static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct smsc47m192_data *data = dev_get_drvdata(dev); |
| return sprintf(buf, "%d\n", data->vrm); |
| } |
| |
| static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct smsc47m192_data *data = dev_get_drvdata(dev); |
| data->vrm = simple_strtoul(buf, NULL, 10); |
| return count; |
| } |
| static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); |
| |
| /* Alarms */ |
| static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); |
| int nr = sensor_attr->index; |
| struct smsc47m192_data *data = smsc47m192_update_device(dev); |
| return sprintf(buf, "%u\n", (data->alarms & nr) ? 1 : 0); |
| } |
| |
| static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 0x0010); |
| static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 0x0020); |
| static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 0x0040); |
| static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 0x4000); |
| static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 0x8000); |
| static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0x0001); |
| static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 0x0002); |
| static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 0x0004); |
| static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 0x0008); |
| static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 0x0100); |
| static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 0x0200); |
| static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 0x0400); |
| static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 0x0800); |
| |
| static struct attribute *smsc47m192_attributes[] = { |
| &sensor_dev_attr_in0_input.dev_attr.attr, |
| &sensor_dev_attr_in0_min.dev_attr.attr, |
| &sensor_dev_attr_in0_max.dev_attr.attr, |
| &sensor_dev_attr_in0_alarm.dev_attr.attr, |
| &sensor_dev_attr_in1_input.dev_attr.attr, |
| &sensor_dev_attr_in1_min.dev_attr.attr, |
| &sensor_dev_attr_in1_max.dev_attr.attr, |
| &sensor_dev_attr_in1_alarm.dev_attr.attr, |
| &sensor_dev_attr_in2_input.dev_attr.attr, |
| &sensor_dev_attr_in2_min.dev_attr.attr, |
| &sensor_dev_attr_in2_max.dev_attr.attr, |
| &sensor_dev_attr_in2_alarm.dev_attr.attr, |
| &sensor_dev_attr_in3_input.dev_attr.attr, |
| &sensor_dev_attr_in3_min.dev_attr.attr, |
| &sensor_dev_attr_in3_max.dev_attr.attr, |
| &sensor_dev_attr_in3_alarm.dev_attr.attr, |
| &sensor_dev_attr_in5_input.dev_attr.attr, |
| &sensor_dev_attr_in5_min.dev_attr.attr, |
| &sensor_dev_attr_in5_max.dev_attr.attr, |
| &sensor_dev_attr_in5_alarm.dev_attr.attr, |
| &sensor_dev_attr_in6_input.dev_attr.attr, |
| &sensor_dev_attr_in6_min.dev_attr.attr, |
| &sensor_dev_attr_in6_max.dev_attr.attr, |
| &sensor_dev_attr_in6_alarm.dev_attr.attr, |
| &sensor_dev_attr_in7_input.dev_attr.attr, |
| &sensor_dev_attr_in7_min.dev_attr.attr, |
| &sensor_dev_attr_in7_max.dev_attr.attr, |
| &sensor_dev_attr_in7_alarm.dev_attr.attr, |
| |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp1_max.dev_attr.attr, |
| &sensor_dev_attr_temp1_min.dev_attr.attr, |
| &sensor_dev_attr_temp1_offset.dev_attr.attr, |
| &sensor_dev_attr_temp1_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp2_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_max.dev_attr.attr, |
| &sensor_dev_attr_temp2_min.dev_attr.attr, |
| &sensor_dev_attr_temp2_offset.dev_attr.attr, |
| &sensor_dev_attr_temp2_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp2_fault.dev_attr.attr, |
| &sensor_dev_attr_temp3_input.dev_attr.attr, |
| &sensor_dev_attr_temp3_max.dev_attr.attr, |
| &sensor_dev_attr_temp3_min.dev_attr.attr, |
| &sensor_dev_attr_temp3_offset.dev_attr.attr, |
| &sensor_dev_attr_temp3_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp3_fault.dev_attr.attr, |
| |
| &dev_attr_cpu0_vid.attr, |
| &dev_attr_vrm.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group smsc47m192_group = { |
| .attrs = smsc47m192_attributes, |
| }; |
| |
| static struct attribute *smsc47m192_attributes_in4[] = { |
| &sensor_dev_attr_in4_input.dev_attr.attr, |
| &sensor_dev_attr_in4_min.dev_attr.attr, |
| &sensor_dev_attr_in4_max.dev_attr.attr, |
| &sensor_dev_attr_in4_alarm.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group smsc47m192_group_in4 = { |
| .attrs = smsc47m192_attributes_in4, |
| }; |
| |
| static void smsc47m192_init_client(struct i2c_client *client) |
| { |
| int i; |
| u8 config = i2c_smbus_read_byte_data(client, SMSC47M192_REG_CONFIG); |
| u8 sfr = i2c_smbus_read_byte_data(client, SMSC47M192_REG_SFR); |
| |
| /* select cycle mode (pause 1 sec between updates) */ |
| i2c_smbus_write_byte_data(client, SMSC47M192_REG_SFR, |
| (sfr & 0xfd) | 0x02); |
| if (!(config & 0x01)) { |
| /* initialize alarm limits */ |
| for (i=0; i<8; i++) { |
| i2c_smbus_write_byte_data(client, |
| SMSC47M192_REG_IN_MIN(i), 0); |
| i2c_smbus_write_byte_data(client, |
| SMSC47M192_REG_IN_MAX(i), 0xff); |
| } |
| for (i=0; i<3; i++) { |
| i2c_smbus_write_byte_data(client, |
| SMSC47M192_REG_TEMP_MIN[i], 0x80); |
| i2c_smbus_write_byte_data(client, |
| SMSC47M192_REG_TEMP_MAX[i], 0x7f); |
| } |
| |
| /* start monitoring */ |
| i2c_smbus_write_byte_data(client, SMSC47M192_REG_CONFIG, |
| (config & 0xf7) | 0x01); |
| } |
| } |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int smsc47m192_detect(struct i2c_client *client, int kind, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| int version; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| /* Detection criteria from sensors_detect script */ |
| version = i2c_smbus_read_byte_data(client, SMSC47M192_REG_VERSION); |
| if (i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_COMPANY_ID) == 0x55 |
| && (version & 0xf0) == 0x20 |
| && (i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_VID) & 0x70) == 0x00 |
| && (i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_VID4) & 0xfe) == 0x80) { |
| dev_info(&adapter->dev, |
| "found SMSC47M192 or compatible, " |
| "version 2, stepping A%d\n", version & 0x0f); |
| } else { |
| dev_dbg(&adapter->dev, |
| "SMSC47M192 detection failed at 0x%02x\n", |
| client->addr); |
| return -ENODEV; |
| } |
| |
| strlcpy(info->type, "smsc47m192", I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| static int smsc47m192_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct smsc47m192_data *data; |
| int config; |
| int err; |
| |
| data = kzalloc(sizeof(struct smsc47m192_data), GFP_KERNEL); |
| if (!data) { |
| err = -ENOMEM; |
| goto exit; |
| } |
| |
| i2c_set_clientdata(client, data); |
| data->vrm = vid_which_vrm(); |
| mutex_init(&data->update_lock); |
| |
| /* Initialize the SMSC47M192 chip */ |
| smsc47m192_init_client(client); |
| |
| /* Register sysfs hooks */ |
| if ((err = sysfs_create_group(&client->dev.kobj, &smsc47m192_group))) |
| goto exit_free; |
| |
| /* Pin 110 is either in4 (+12V) or VID4 */ |
| config = i2c_smbus_read_byte_data(client, SMSC47M192_REG_CONFIG); |
| if (!(config & 0x20)) { |
| if ((err = sysfs_create_group(&client->dev.kobj, |
| &smsc47m192_group_in4))) |
| goto exit_remove_files; |
| } |
| |
| data->hwmon_dev = hwmon_device_register(&client->dev); |
| if (IS_ERR(data->hwmon_dev)) { |
| err = PTR_ERR(data->hwmon_dev); |
| goto exit_remove_files; |
| } |
| |
| return 0; |
| |
| exit_remove_files: |
| sysfs_remove_group(&client->dev.kobj, &smsc47m192_group); |
| sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4); |
| exit_free: |
| kfree(data); |
| exit: |
| return err; |
| } |
| |
| static int smsc47m192_remove(struct i2c_client *client) |
| { |
| struct smsc47m192_data *data = i2c_get_clientdata(client); |
| |
| hwmon_device_unregister(data->hwmon_dev); |
| sysfs_remove_group(&client->dev.kobj, &smsc47m192_group); |
| sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4); |
| |
| kfree(data); |
| |
| return 0; |
| } |
| |
| static struct smsc47m192_data *smsc47m192_update_device(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct smsc47m192_data *data = i2c_get_clientdata(client); |
| int i, config; |
| |
| mutex_lock(&data->update_lock); |
| |
| if (time_after(jiffies, data->last_updated + HZ + HZ / 2) |
| || !data->valid) { |
| u8 sfr = i2c_smbus_read_byte_data(client, SMSC47M192_REG_SFR); |
| |
| dev_dbg(&client->dev, "Starting smsc47m192 update\n"); |
| |
| for (i = 0; i <= 7; i++) { |
| data->in[i] = i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_IN(i)); |
| data->in_min[i] = i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_IN_MIN(i)); |
| data->in_max[i] = i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_IN_MAX(i)); |
| } |
| for (i = 0; i < 3; i++) { |
| data->temp[i] = i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_TEMP[i]); |
| data->temp_max[i] = i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_TEMP_MAX[i]); |
| data->temp_min[i] = i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_TEMP_MIN[i]); |
| } |
| for (i = 1; i < 3; i++) |
| data->temp_offset[i] = i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_TEMP_OFFSET(i)); |
| /* first offset is temp_offset[0] if SFR bit 4 is set, |
| temp_offset[1] otherwise */ |
| if (sfr & 0x10) { |
| data->temp_offset[0] = data->temp_offset[1]; |
| data->temp_offset[1] = 0; |
| } else |
| data->temp_offset[0] = 0; |
| |
| data->vid = i2c_smbus_read_byte_data(client, SMSC47M192_REG_VID) |
| & 0x0f; |
| config = i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_CONFIG); |
| if (config & 0x20) |
| data->vid |= (i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_VID4) & 0x01) << 4; |
| data->alarms = i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_ALARM1) | |
| (i2c_smbus_read_byte_data(client, |
| SMSC47M192_REG_ALARM2) << 8); |
| |
| data->last_updated = jiffies; |
| data->valid = 1; |
| } |
| |
| mutex_unlock(&data->update_lock); |
| |
| return data; |
| } |
| |
| static int __init smsc47m192_init(void) |
| { |
| return i2c_add_driver(&smsc47m192_driver); |
| } |
| |
| static void __exit smsc47m192_exit(void) |
| { |
| i2c_del_driver(&smsc47m192_driver); |
| } |
| |
| MODULE_AUTHOR("Hartmut Rick <linux@rick.claranet.de>"); |
| MODULE_DESCRIPTION("SMSC47M192 driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(smsc47m192_init); |
| module_exit(smsc47m192_exit); |