ARM: dts: msm: add DSI and PHY information for SDM845
This change adds DSI controller and PHY information for SDM845.
Various panels supported by SDM845 are also added as part
of this change.
CRs-Fixed: 2023448
Change-Id: I6e2da1931fb53587e88df926dbf6d91c432893cb
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
diff --git a/arch/arm64/boot/dts/qcom/dsi-panel-sharp-1080p-cmd.dtsi b/arch/arm64/boot/dts/qcom/dsi-panel-sharp-1080p-cmd.dtsi
new file mode 100644
index 0000000..aa52083
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/dsi-panel-sharp-1080p-cmd.dtsi
@@ -0,0 +1,77 @@
+/* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&mdss_mdp {
+ dsi_sharp_1080_cmd: qcom,mdss_dsi_sharp_1080p_cmd {
+ qcom,mdss-dsi-panel-name = "sharp 1080p cmd mode dsi panel";
+ qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;
+ qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
+ qcom,mdss-dsi-panel-destination = "display_1";
+ qcom,mdss-dsi-panel-framerate = <60>;
+ qcom,mdss-dsi-panel-clockrate = <850000000>;
+ qcom,mdss-dsi-virtual-channel-id = <0>;
+ qcom,mdss-dsi-stream = <0>;
+ qcom,mdss-dsi-panel-width = <1080>;
+ qcom,mdss-dsi-panel-height = <1920>;
+ qcom,mdss-dsi-h-front-porch = <0>;
+ qcom,mdss-dsi-h-back-porch = <0>;
+ qcom,mdss-dsi-h-pulse-width = <0>;
+ qcom,mdss-dsi-h-sync-skew = <0>;
+ qcom,mdss-dsi-v-back-porch = <0>;
+ qcom,mdss-dsi-v-front-porch = <0>;
+ qcom,mdss-dsi-v-pulse-width = <0>;
+ qcom,mdss-dsi-h-left-border = <0>;
+ qcom,mdss-dsi-h-right-border = <0>;
+ qcom,mdss-dsi-v-top-border = <0>;
+ qcom,mdss-dsi-v-bottom-border = <0>;
+ qcom,mdss-dsi-bpp = <24>;
+ qcom,mdss-dsi-underflow-color = <0xff>;
+ qcom,mdss-dsi-border-color = <0>;
+ qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;
+ qcom,mdss-dsi-on-command = [
+ 15 01 00 00 00 00 02 bb 10
+ 15 01 00 00 00 00 02 b0 03
+ 05 01 00 00 78 00 01 11
+ 15 01 00 00 00 00 02 51 ff
+ 15 01 00 00 00 00 02 53 24
+ 15 01 00 00 00 00 02 ff 23
+ 15 01 00 00 00 00 02 08 05
+ 15 01 00 00 00 00 02 46 90
+ 15 01 00 00 00 00 02 ff 10
+ 15 01 00 00 00 00 02 ff f0
+ 15 01 00 00 00 00 02 92 01
+ 15 01 00 00 00 00 02 ff 10
+ 05 01 00 00 28 00 01 29];
+ qcom,mdss-dsi-off-command = [
+ 05 01 00 00 10 00 01 28
+ 05 01 00 00 40 00 01 10];
+ qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
+ qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
+ qcom,mdss-dsi-h-sync-pulse = <0>;
+ qcom,mdss-dsi-traffic-mode = "burst_mode";
+ qcom,mdss-dsi-bllp-eof-power-mode;
+ qcom,mdss-dsi-bllp-power-mode;
+ qcom,mdss-dsi-lane-0-state;
+ qcom,mdss-dsi-lane-1-state;
+ qcom,mdss-dsi-lane-2-state;
+ qcom,mdss-dsi-lane-3-state;
+ qcom,mdss-dsi-dma-trigger = "trigger_sw";
+ qcom,mdss-dsi-mdp-trigger = "none";
+ qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
+ qcom,mdss-dsi-te-pin-select = <1>;
+ qcom,mdss-dsi-wr-mem-start = <0x2c>;
+ qcom,mdss-dsi-wr-mem-continue = <0x3c>;
+ qcom,mdss-dsi-te-dcs-command = <1>;
+ qcom,mdss-dsi-te-check-enable;
+ qcom,mdss-dsi-te-using-te-pin;
+ };
+};