Merge tag 'at91-4.5-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
Second batch of DT changes for 4.5:
- addition of sound nodes for sama5d2 and the xplained
- addition of a new patform by Landis+Gyr: VInCo
* tag 'at91-4.5-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: at91/dt: sama5d2 Xplained: add pdmic node
ARM: at91/dt: sama5d2: add pdmic node
ARM: at91/dt: Add Support for the L+G VInCo platform
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
index 6b0f49f..8608a77 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
@@ -5,4 +5,11 @@
Required root node property:
+bcm4708
compatible = "brcm,bcm4708";
+
+bcm4709
+compatible = "brcm,bcm4709";
+
+bcm53012
+compatible = "brcm,bcm53012";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
new file mode 100644
index 0000000..677ef9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
@@ -0,0 +1,39 @@
+Broadcom Northstar Plus SoC CPU Enable Method
+---------------------------------------------
+This binding defines the enable method used for starting secondary
+CPU in the following Broadcom SoCs:
+ BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
+
+The enable method is specified by defining the following required
+properties in the corresponding secondary "cpu" device tree node:
+ - enable-method = "brcm,bcm-nsp-smp";
+ - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register which should hold the common
+entry point for a secondary CPU. This entry is cpu node specific
+and should be added per cpu. E.g., in case of NSP (BCM58625) which
+is a dual core CPU SoC, this entry should be added to cpu1 node.
+
+
+Example:
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ enable-method = "brcm,bcm-nsp-smp";
+ secondary-boot-reg = <0xffff042c>;
+ reg = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/arm/compulab-boards.txt b/Documentation/devicetree/bindings/arm/compulab-boards.txt
new file mode 100644
index 0000000..71172d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/compulab-boards.txt
@@ -0,0 +1,5 @@
+CompuLab SB-SOM is a multi-module baseboard capable of carrying CM-T43, CM-T54,
+and CM-QS600 modules with minor modifications to the SB-SOM assembly.
+
+Required root node properties:
+ - compatible = should be "compulab,sb-som"
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 3a07a87..d191554 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -190,6 +190,7 @@
"allwinner,sun6i-a31"
"allwinner,sun8i-a23"
"arm,psci"
+ "brcm,bcm-nsp-smp"
"brcm,brahma-b15"
"marvell,armada-375-smp"
"marvell,armada-380-smp"
diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
index 5171ad8..ab0c9cd 100644
--- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
@@ -24,6 +24,8 @@
"buffalo,lswxl"
"buffalo,lsxhl"
"buffalo,lsxl"
+"cloudengines,pogo02"
+"cloudengines,pogoplugv4"
"dlink,dns-320"
"dlink,dns-320-a1"
"dlink,dns-325"
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index 618a9199..54f43bc 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -6,6 +6,7 @@
Required root node property:
compatible: Must contain one of
+ "mediatek,mt2701"
"mediatek,mt6580"
"mediatek,mt6589"
"mediatek,mt6592"
@@ -17,6 +18,9 @@
Supported boards:
+- Evaluation board for MT2701:
+ Required root node properties:
+ - compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
- Evaluation board for MT6580:
Required root node properties:
- compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
index f6cd3e4..aaf8d14 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
@@ -18,7 +18,7 @@
Also it uses the common reset controller binding from
Documentation/devicetree/bindings/reset/reset.txt.
The available reset outputs are defined in
-dt-bindings/reset-controller/mt*-resets.h
+dt-bindings/reset/mt*-resets.h
Example:
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
index f25b854..2f6ff86 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
@@ -18,7 +18,7 @@
Also it uses the common reset controller binding from
Documentation/devicetree/bindings/reset/reset.txt.
The available reset outputs are defined in
-dt-bindings/reset-controller/mt*-resets.h
+dt-bindings/reset/mt*-resets.h
Example:
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 9f4e513..a2bd593 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -138,9 +138,21 @@
- AM335X phyBOARD-WEGA: Single Board Computer dev kit
compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"
+- AM335X CM-T335 : System On Module, built around the Sitara AM3352/4
+ compatible = "compulab,cm-t335", "ti,am33xx"
+
+- AM335X SBC-T335 : single board computer, built around the Sitara AM3352/4
+ compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx"
+
- OMAP5 EVM : Evaluation Module
compatible = "ti,omap5-evm", "ti,omap5"
+- AM437x CM-T43
+ compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"
+
+- AM437x SBC-T43
+ compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"
+
- AM43x EPOS EVM
compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
@@ -150,6 +162,12 @@
- AM437x SK EVM: AM437x StarterKit Evaluation Module
compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
+- AM57XX CL-SOM-AM57x
+ compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM57XX SBC-AM57x
+ compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
- DRA742 EVM: Software Development Board for DRA742
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 8e985dd..c980b2b 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -1,6 +1,10 @@
Rockchip platforms device tree bindings
---------------------------------------
+- Kylin RK3036 board:
+ Required root node properties:
+ - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
+
- MarsBoard RK3066 board:
Required root node properties:
- compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
@@ -35,6 +39,11 @@
Required root node properties:
- compatible = "netxeon,r89", "rockchip,rk3288";
+- Google Brain (dev-board):
+ Required root node properties:
+ - compatible = "google,veyron-brain-rev0", "google,veyron-brain",
+ "google,veyron", "rockchip,rk3288";
+
- Google Jaq (Haier Chromebook 11 and more):
Required root node properties:
- compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
@@ -49,6 +58,15 @@
"google,veyron-jerry-rev3", "google,veyron-jerry",
"google,veyron", "rockchip,rk3288";
+- Google Mickey (Asus Chromebit CS10):
+ Required root node properties:
+ - compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
+ "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
+ "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
+ "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
+ "google,veyron-mickey-rev0", "google,veyron-mickey",
+ "google,veyron", "rockchip,rk3288";
+
- Google Minnie (Asus Chromebook Flip C100P):
Required root node properties:
- compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
@@ -72,3 +90,7 @@
- Rockchip R88 board:
Required root node properties:
- compatible = "rockchip,r88", "rockchip,rk3368";
+
+- Rockchip RK3228 Evaluation board:
+ Required root node properties:
+ - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
diff --git a/Documentation/devicetree/bindings/arm/scu.txt b/Documentation/devicetree/bindings/arm/scu.txt
index c447680..08a5878 100644
--- a/Documentation/devicetree/bindings/arm/scu.txt
+++ b/Documentation/devicetree/bindings/arm/scu.txt
@@ -10,10 +10,13 @@
Revision r2p0
- Cortex-A5: see DDI0434B Cortex-A5 MPCore Technical Reference Manual
Revision r0p1
+- ARM11 MPCore: see DDI0360F ARM 11 MPCore Processor Technical Reference
+ Manial Revision r2p0
- compatible : Should be:
"arm,cortex-a9-scu"
"arm,cortex-a5-scu"
+ "arm,arm11mp-scu"
- reg : Specify the base address and the size of the SCU register window.
diff --git a/Documentation/devicetree/bindings/arm/technologic.txt b/Documentation/devicetree/bindings/arm/technologic.txt
new file mode 100644
index 0000000..8422988
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/technologic.txt
@@ -0,0 +1,6 @@
+Technologic Systems Platforms Device Tree Bindings
+--------------------------------------------------
+
+TS-4800 board
+Required root node properties:
+ - compatible = "technologic,imx51-ts4800", "fsl,imx51";
diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
new file mode 100644
index 0000000..8b7177c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
@@ -0,0 +1,40 @@
+ARM System Controller ICST clocks
+
+The ICS525 and ICS307 oscillators are produced by Integrated Devices
+Technology (IDT). ARM integrated these oscillators deeply into their
+reference designs by adding special control registers that manage such
+oscillators to their system controllers.
+
+The ARM system controller contains logic to serialize and initialize
+an ICST clock request after a write to the 32 bit register at an offset
+into the system controller. Furthermore, to even be able to alter one of
+these frequencies, the system controller must first be unlocked by
+writing a special token to another offset in the system controller.
+
+The ICST oscillator must be provided inside a system controller node.
+
+Required properties:
+- lock-offset: the offset address into the system controller where the
+ unlocking register is located
+- vco-offset: the offset address into the system controller where the
+ ICST control register is located (even 32 bit address)
+- compatible: must be one of "arm,syscon-icst525" or "arm,syscon-icst307"
+- #clock-cells: must be <0>
+- clocks: parent clock, since the ICST needs a parent clock to derive its
+ frequency from, this attribute is compulsory.
+
+Example:
+
+syscon: syscon@10000000 {
+ compatible = "syscon";
+ reg = <0x10000000 0x1000>;
+
+ oscclk0: osc0@0c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x0c>;
+ clocks = <&xtal24mhz>;
+ };
+ (...)
+};
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
index ede65a5..0b35e71 100644
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -208,3 +208,8 @@
ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED
ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED
ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED
+
+BCM63138
+--------
+PLL and leaf clock compatible strings for BCM63138 are:
+ "brcm,bcm63138-armpll"
diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
new file mode 100644
index 0000000..e3eb0f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
@@ -0,0 +1,28 @@
+PLL divider based Dove clocks
+
+Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
+high speed clocks for a number of peripherals. These dividers are part of
+the PMU, and thus this node should be a child of the PMU node.
+
+The following clocks are provided:
+
+ID Clock
+-------------
+0 AXI bus clock
+1 GPU clock
+2 VMeta clock
+3 LCD clock
+
+Required properties:
+- compatible : shall be "marvell,dove-divider-clock"
+- reg : shall be the register address of the Core PLL and Clock Divider
+ Control 0 register. This will cover that register, as well as the
+ Core PLL and Clock Divider Control 1 register. Thus, it will have
+ a size of 8.
+- #clock-cells : from common clock binding; shall be set to 1
+
+divider_clk: core-clock@0064 {
+ compatible = "marvell,dove-divider-clock";
+ reg = <0x0064 0x8>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt
new file mode 100644
index 0000000..70cd8d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt
@@ -0,0 +1,4 @@
+Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "startek,startek-kd050c"
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index d3d0a4f..079b42a 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -22,8 +22,7 @@
Optional properties:
- ti,hwmods: Name of the hwmods associated to the eDMA CC
- ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
- these channels will be SW triggered channels. The list must
- contain 16 bits numbers, see example.
+ these channels will be SW triggered channels. See example.
- ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
the driver, they are allocated to be used by for example the
DSP. See example.
@@ -56,10 +55,9 @@
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
/* Channel 20 and 21 is allocated for memcpy */
- ti,edma-memcpy-channels = /bits/ 16 <20 21>;
- /* The following PaRAM slots are reserved: 35-45 and 100-110 */
- ti,edma-reserved-slot-ranges = /bits/ 16 <35 10>,
- /bits/ 16 <100 10>;
+ ti,edma-memcpy-channels = <20 21>;
+ /* The following PaRAM slots are reserved: 35-44 and 100-109 */
+ ti,edma-reserved-slot-ranges = <35 10>, <100 10>;
};
edma_tptc0: tptc@49800000 {
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
index afef6a8..b8e1674 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
@@ -14,6 +14,7 @@
"mediatek,mt6582-sysirq"
"mediatek,mt6580-sysirq"
"mediatek,mt6577-sysirq"
+ "mediatek,mt2701-sysirq"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in
Documentation/devicetree/bindings/arm/gic.txt
diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt
index 4f05d20..d181096 100644
--- a/Documentation/devicetree/bindings/regulator/tps65217.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65217.txt
@@ -26,7 +26,11 @@
ti,pmic-shutdown-controller;
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: dcdc1 {
+ reg = <0>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -34,6 +38,7 @@
};
dcdc2_reg: dcdc2 {
+ reg = <1>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -41,6 +46,7 @@
};
dcdc3_reg: dcc3 {
+ reg = <2>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
@@ -48,6 +54,7 @@
};
ldo1_reg: ldo1 {
+ reg = <3>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -55,6 +62,7 @@
};
ldo2_reg: ldo2 {
+ reg = <4>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -62,6 +70,7 @@
};
ldo3_reg: ldo3 {
+ reg = <5>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -69,6 +78,7 @@
};
ldo4_reg: ldo4 {
+ reg = <6>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index 2d47add..a833a01 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -2,15 +2,15 @@
Required properties:
- compatible should contain:
- * "mediatek,mt8135-uart" for MT8135 compatible UARTS
- * "mediatek,mt8127-uart" for MT8127 compatible UARTS
- * "mediatek,mt8173-uart" for MT8173 compatible UARTS
- * "mediatek,mt6795-uart" for MT6795 compatible UARTS
- * "mediatek,mt6589-uart" for MT6589 compatible UARTS
- * "mediatek,mt6582-uart" for MT6582 compatible UARTS
+ * "mediatek,mt2701-uart" for MT2701 compatible UARTS
* "mediatek,mt6580-uart" for MT6580 compatible UARTS
- * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6795,
- MT6589, MT6582, MT6580, MT6577)
+ * "mediatek,mt6582-uart" for MT6582 compatible UARTS
+ * "mediatek,mt6589-uart" for MT6589 compatible UARTS
+ * "mediatek,mt6795-uart" for MT6795 compatible UARTS
+ * "mediatek,mt8127-uart" for MT8127 compatible UARTS
+ * "mediatek,mt8135-uart" for MT8135 compatible UARTS
+ * "mediatek,mt8173-uart" for MT8173 compatible UARTS
+ * "mediatek,mt6577-uart" for MT6577 and all of the above
- reg: The base address of the UART register bank.
diff --git a/Documentation/devicetree/bindings/soc/dove/pmu.txt b/Documentation/devicetree/bindings/soc/dove/pmu.txt
new file mode 100644
index 0000000..edd40b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/dove/pmu.txt
@@ -0,0 +1,56 @@
+Device Tree bindings for Marvell PMU
+
+Required properties:
+ - compatible: value should be "marvell,dove-pmu".
+ May also include "simple-bus" if there are child devices, in which
+ case the ranges node is required.
+ - reg: two base addresses and sizes of the PM controller and PMU.
+ - interrupts: single interrupt number for the PMU interrupt
+ - interrupt-controller: must be specified as the PMU itself is an
+ interrupt controller.
+ - #interrupt-cells: must be 1.
+ - #reset-cells: must be 1.
+ - domains: sub-node containing domain descriptions
+
+Optional properties:
+ - ranges: defines the address mapping for child devices, as per the
+ standard property of this name. Required when compatible includes
+ "simple-bus".
+
+Power domain descriptions are listed as child nodes of the "domains"
+sub-node. Each domain has the following properties:
+
+Required properties:
+ - #power-domain-cells: must be 0.
+
+Optional properties:
+ - marvell,pmu_pwr_mask: specifies the mask value for PMU power register
+ - marvell,pmu_iso_mask: specifies the mask value for PMU isolation register
+ - resets: points to the reset manager (PMU node) and reset index.
+
+Example:
+
+ pmu: power-management@d0000 {
+ compatible = "marvell,dove-pmu";
+ reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+ interrupts = <33>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #reset-cells = <1>;
+
+ domains {
+ vpu_domain: vpu-domain {
+ #power-domain-cells = <0>;
+ marvell,pmu_pwr_mask = <0x00000008>;
+ marvell,pmu_iso_mask = <0x00000001>;
+ resets = <&pmu 16>;
+ };
+
+ gpu_domain: gpu-domain {
+ #power-domain-cells = <0>;
+ marvell,pmu_pwr_mask = <0x00000004>;
+ marvell,pmu_iso_mask = <0x00000002>;
+ resets = <&pmu 18>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
index a6c8afc..e8f15e3 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -21,6 +21,18 @@
These are the clocks which hardware needs to be enabled
before enabling certain power domains.
+Optional properties:
+- vdec-supply: Power supply for the vdec power domain
+- venc-supply: Power supply for the venc power domain
+- isp-supply: Power supply for the isp power domain
+- mm-supply: Power supply for the mm power domain
+- venc_lt-supply: Power supply for the venc_lt power domain
+- audio-supply: Power supply for the audio power domain
+- usb-supply: Power supply for the usb power domain
+- mfg_async-supply: Power supply for the mfg_async power domain
+- mfg_2d-supply: Power supply for the mfg_2d power domain
+- mfg-supply: Power supply for the mfg power domain
+
Example:
scpsys: scpsys@10006000 {
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
new file mode 100644
index 0000000..5cc82b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
@@ -0,0 +1,104 @@
+Qualcomm Shared Memory Point 2 Point binding
+
+The Shared Memory Point to Point (SMP2P) protocol facilitates communication of
+a single 32-bit value between two processors. Each value has a single writer
+(the local side) and a single reader (the remote side). Values are uniquely
+identified in the system by the directed edge (local processor ID to remote
+processor ID) and a string identifier.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,smp2p"
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: one entry specifying the smp2p notification interrupt
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the remote end of the smp2p edge:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+- qcom,smem:
+ Usage: required
+ Value type: <u32 array>
+ Definition: two identifiers of the inbound and outbound smem items used
+ for this edge
+
+- qcom,local-pid:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the identfier of the local endpoint of this edge
+
+- qcom,remote-pid:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the identfier of the remote endpoint of this edge
+
+= SUBNODES
+Each SMP2P pair contain a set of inbound and outbound entries, these are
+described in subnodes of the smp2p device node. The node names are not
+important.
+
+- qcom,entry-name:
+ Usage: required
+ Value type: <string>
+ Definition: specifies the name of this entry, for inbound entries this
+ will be used to match against the remotely allocated entry
+ and for outbound entries this name is used for allocating
+ entries
+
+- interrupt-controller:
+ Usage: required for incoming entries
+ Value type: <empty>
+ Definition: marks the entry as inbound; the node should be specified
+ as a two cell interrupt-controller as defined in
+ "../interrupt-controller/interrupts.txt"
+ If not specified this node will denote the outgoing entry
+
+- #interrupt-cells:
+ Usage: required for incoming entries
+ Value type: <u32>
+ Definition: must be 2 - denoting the bit in the entry and IRQ flags
+
+- #qcom,state-cells:
+ Usage: required for outgoing entries
+ Value type: <u32>
+ Definition: must be 1 - denoting the bit in the entry
+
+= EXAMPLE
+The following example shows the SMP2P setup with the wireless processor,
+defined from the 8974 apps processor's point-of-view. It encompasses one
+inbound and one outbound entry:
+
+wcnss-smp2p {
+ compatible = "qcom,smp2p";
+ qcom,smem = <431>, <451>;
+
+ interrupts = <0 143 1>;
+
+ qcom,ipc = <&apcs 8 18>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <4>;
+
+ wcnss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,state-cells = <1>;
+ };
+
+ wcnss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
new file mode 100644
index 0000000..a6634c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
@@ -0,0 +1,104 @@
+Qualcomm Shared Memory State Machine
+
+The Shared Memory State Machine facilitates broadcasting of single bit state
+information between the processors in a Qualcomm SoC. Each processor is
+assigned 32 bits of state that can be modified. A processor can through a
+matrix of bitmaps signal subscription of notifications upon changes to a
+certain bit owned by a certain remote processor.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,smsm"
+
+- qcom,ipc-N:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the N:th remote processor
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+- qcom,local-host:
+ Usage: optional
+ Value type: <u32>
+ Definition: identifier of the local processor in the list of hosts, or
+ in other words specifier of the column in the subscription
+ matrix representing the local processor
+ defaults to host 0
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 0
+
+= SUBNODES
+Each processor's state bits are described by a subnode of the smsm device node.
+Nodes can either be flagged as an interrupt-controller to denote a remote
+processor's state bits or the local processors bits. The node names are not
+important.
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the offset, in words, of the first bit for this
+ entry
+
+- #qcom,state-cells:
+ Usage: required for local entry
+ Value type: <u32>
+ Definition: must be 1 - denotes bit number
+
+- interrupt-controller:
+ Usage: required for remote entries
+ Value type: <empty>
+ Definition: marks the entry as a interrupt-controller and the state bits
+ to belong to a remote processor
+
+- #interrupt-cells:
+ Usage: required for remote entries
+ Value type: <u32>
+ Definition: must be 2 - denotes bit number and IRQ flags
+
+- interrupts:
+ Usage: required for remote entries
+ Value type: <prop-encoded-array>
+ Definition: one entry specifying remote IRQ used by the remote processor
+ to signal changes of its state bits
+
+
+= EXAMPLE
+The following example shows the SMEM setup for controlling properties of the
+wireless processor, defined from the 8974 apps processor's point-of-view. It
+encompasses one outbound entry and the outgoing interrupt for the wireless
+processor.
+
+smsm {
+ compatible = "qcom,smsm";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ qcom,ipc-3 = <&apcs 8 19>;
+
+ apps_smsm: apps@0 {
+ reg = <0>;
+
+ #qcom,state-cells = <1>;
+ };
+
+ wcnss_smsm: wcnss@7 {
+ reg = <7>;
+ interrupts = <0 144 1>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt
index 601a360..cc8304a 100644
--- a/Documentation/devicetree/bindings/spi/ti_qspi.txt
+++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt
@@ -15,14 +15,32 @@
- spi-max-frequency: Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
+Optional properties:
+- syscon-chipselects: Handle to system control region contains QSPI
+ chipselect register and offset of that register.
+
Example:
+For am4372:
qspi: qspi@4b300000 {
- compatible = "ti,dra7xxx-qspi";
- reg = <0x47900000 0x100>, <0x30000000 0x3ffffff>;
+ compatible = "ti,am4372-qspi";
+ reg = <0x47900000 0x100>, <0x30000000 0x4000000>;
reg-names = "qspi_base", "qspi_mmap";
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <25000000>;
ti,hwmods = "qspi";
};
+
+For dra7xx:
+qspi: qspi@4b300000 {
+ compatible = "ti,dra7xxx-qspi";
+ reg = <0x4b300000 0x100>,
+ <0x5c000000 0x4000000>,
+ reg-names = "qspi_base", "qspi_mmap";
+ syscon-chipselects = <&scm_conf 0x558>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <48000000>;
+ ti,hwmods = "qspi";
+};
diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
index 64083bc..8ff54eb 100644
--- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
+++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
@@ -3,6 +3,7 @@
Required properties:
- compatible should contain:
+ * "mediatek,mt2701-timer" for MT2701 compatible timers
* "mediatek,mt6580-timer" for MT6580 compatible timers
* "mediatek,mt6589-timer" for MT6589 compatible timers
* "mediatek,mt8127-timer" for MT8127 compatible timers
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 55df1d4..e4cd78a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -123,6 +123,7 @@
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
kinetic Kinetic Technologies
+kosagi Sutajio Ko-Usagi PTE Ltd.
lacie LaCie
lantiq Lantiq Semiconductor
lenovo Lenovo Group Ltd.
@@ -218,11 +219,13 @@
spansion Spansion Inc.
sprd Spreadtrum Communications Inc.
st STMicroelectronics
+startek Startek
ste ST-Ericsson
stericsson ST-Ericsson
synology Synology, Inc.
tbs TBS Technologies
tcl Toby Churchill Ltd.
+technologic Technologic Systems
thine THine Electronics, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index af9eb5b..6a00939 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -2,7 +2,11 @@
Required properties:
-- compatible : should be "mediatek,mt6589-wdt"
+- compatible should contain:
+ * "mediatek,mt2701-wdt" for MT2701 compatible watchdog timers
+ * "mediatek,mt6589-wdt" for all compatible watchdog timers (MT2701,
+ MT6589)
+
- reg : Specifies base physical address and size of the registers.
Example:
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c7e0ec5..d19dc59 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -77,7 +77,10 @@
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb
+ bcm4709-netgear-r8000.dtb \
+ bcm94708.dtb \
+ bcm94709.dtb \
+ bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
@@ -202,12 +205,14 @@
kirkwood-ns2mini.dtb \
kirkwood-nsa310.dtb \
kirkwood-nsa310a.dtb \
+ kirkwood-nsa325.dtb \
kirkwood-openblocks_a6.dtb \
kirkwood-openblocks_a7.dtb \
kirkwood-openrd-base.dtb \
kirkwood-openrd-client.dtb \
kirkwood-openrd-ultimate.dtb \
kirkwood-pogo_e02.dtb \
+ kirkwood-pogoplug-series-4.dtb \
kirkwood-rd88f6192.dtb \
kirkwood-rd88f6281-z0.dtb \
kirkwood-rd88f6281-a.dtb \
@@ -270,7 +275,8 @@
imx51-apf51dev.dtb \
imx51-babbage.dtb \
imx51-digi-connectcore-jsk.dtb \
- imx51-eukrea-mbimxsd51-baseboard.dtb
+ imx51-eukrea-mbimxsd51-baseboard.dtb \
+ imx51-ts4800.dtb
dtb-$(CONFIG_SOC_IMX53) += \
imx53-ard.dtb \
imx53-m53evk.dtb \
@@ -327,6 +333,7 @@
imx6q-hummingboard.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
+ imx6q-novena.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
@@ -352,6 +359,8 @@
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
+ imx7d-cl-som-imx7.dtb \
+ imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-qds.dtb \
@@ -361,6 +370,7 @@
vf610-colibri-eval-v3.dtb \
vf610m4-colibri.dtb \
vf610-cosmic.dtb \
+ vf610m4-cosmic.dtb \
vf610-twr.dtb
dtb-$(CONFIG_ARCH_MXS) += \
imx23-evk.dtb \
@@ -461,13 +471,16 @@
am335x-bone.dtb \
am335x-boneblack.dtb \
am335x-bonegreen.dtb \
- am335x-sl50.dtb \
+ am335x-chiliboard.dtb \
+ am335x-cm-t335.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
+ am335x-lxm.dtb \
am335x-nano.dtb \
am335x-pepper.dtb \
- am335x-lxm.dtb \
- am335x-chiliboard.dtb \
+ am335x-shc.dtb \
+ am335x-sbc-t335.dtb \
+ am335x-sl50.dtb \
am335x-wega-rdk.dtb
dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-duovero-parlor.dtb \
@@ -480,17 +493,21 @@
omap4-var-stk-om44.dtb
dtb-$(CONFIG_SOC_AM43XX) += \
am43x-epos-evm.dtb \
- am437x-sk-evm.dtb \
+ am437x-cm-t43.dtb \
+ am437x-gp-evm.dtb \
am437x-idk-evm.dtb \
- am437x-gp-evm.dtb
+ am437x-sbc-t43.dtb \
+ am437x-sk-evm.dtb
dtb-$(CONFIG_SOC_OMAP5) += \
omap5-cm-t54.dtb \
omap5-igep0050.dtb \
omap5-sbc-t54.dtb \
omap5-uevm.dtb
dtb-$(CONFIG_SOC_DRA7XX) += \
- dra7-evm.dtb \
am57xx-beagle-x15.dtb \
+ am57xx-cl-som-am57x.dtb \
+ am57xx-sbc-am57x.dtb \
+ dra7-evm.dtb \
dra72-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-lacie-d2-network.dtb \
@@ -504,6 +521,7 @@
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
+ qcom-apq8064-sony-xperia-yuga.dtb \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@@ -512,12 +530,16 @@
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
- arm-realview-pb1176.dtb
+ arm-realview-pb1176.dtb \
+ arm-realview-pb11mp.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+ rk3036-evb.dtb \
+ rk3036-kylin.dtb \
rk3066a-bqcurie2.dtb \
rk3066a-marsboard.dtb \
rk3066a-rayeager.dtb \
rk3188-radxarock.dtb \
+ rk3228-evb.dtb \
rk3288-evb-act8846.dtb \
rk3288-evb-rk808.dtb \
rk3288-firefly-beta.dtb \
@@ -525,8 +547,10 @@
rk3288-popmetal.dtb \
rk3288-r89.dtb \
rk3288-rock2-square.dtb \
+ rk3288-veyron-brain.dtb \
rk3288-veyron-jaq.dtb \
rk3288-veyron-jerry.dtb \
+ rk3288-veyron-mickey.dtb \
rk3288-veyron-minnie.dtb \
rk3288-veyron-pinky.dtb \
rk3288-veyron-speedy.dtb
@@ -549,7 +573,6 @@
r8a7778-bockw.dtb \
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
- r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
r8a7791-porter.dtb \
r8a7793-gose.dtb \
@@ -559,6 +582,7 @@
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk_sdmmc.dtb \
+ socfpga_cyclone5_mcvevk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_de0_sockit.dtb \
socfpga_cyclone5_sockit.dtb \
@@ -640,6 +664,7 @@
sun7i-a20-cubietruck.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-i12-tvbox.dtb \
+ sun7i-a20-icnova-swac.dtb \
sun7i-a20-m3.dtb \
sun7i-a20-mk808c.dtb \
sun7i-a20-olimex-som-evb.dtb \
@@ -662,7 +687,8 @@
sun8i-a33-ga10h-v1.1.dtb \
sun8i-a33-ippo-q8h-v1.2.dtb \
sun8i-a33-q8-tablet.dtb \
- sun8i-a33-sinlinx-sina33.dtb
+ sun8i-a33-sinlinx-sina33.dtb \
+ sun8i-h3-orangepi-plus.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
@@ -750,6 +776,7 @@
armada-385-db-ap.dtb \
armada-385-linksys-caiman.dtb \
armada-385-linksys-cobra.dtb \
+ armada-388-clearfog.dtb \
armada-388-db.dtb \
armada-388-gp.dtb \
armada-388-rd.dtb
@@ -773,6 +800,7 @@
dove-dove-db.dtb \
dove-sbc-a510.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += \
+ mt2701-evb.dtb \
mt6580-evbp1.dtb \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 7d36601..ded1eb6 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -56,175 +56,171 @@
&am33xx_pinmux {
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x020 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
- 0x024 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
- 0x028 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
- 0x02c (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
- 0x080 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
- 0x084 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
- 0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */
+ AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
+ AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
+ AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
+ AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
+ AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
+ AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
>;
};
tps65910_pins: pinmux_tps65910_pins {
pinctrl-single,pins = <
- 0x078 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */
>;
};
tca6416_pins: pinmux_tca6416_pins {
pinctrl-single,pins = <
- 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+ AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x158 0x2a /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */
- 0x15c 0x2a /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */
+ AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */
+ AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */
>;
};
dcan1_pins: pinmux_dcan1_pins {
pinctrl-single,pins = <
- 0x168 0x0a /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */
- 0x16c 0x2a /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */
+ AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.dcan1_tx_mux0 */
+ AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2) /* uart0_rtsn.dcan1_rx_mux0 */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x180 0x28 /* uart1_rxd, INPUT | MODE0 */
- 0x184 0x28 /* uart1_txd, INPUT | MODE0 */
- /*0x178 0x28*/ /* uart1_ctsn, INPUT | MODE0 */
- /*0x17c 0x08*/ /* uart1_rtsn, OUTPUT | MODE0 */
- 0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */
- 0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */
- 0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
- 0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
- 0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
- 0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
+ AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */
+ AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
+ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
+ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
+ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x150 0x29 /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */
- 0x154 0x09 /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */
- /*0x188 0x2a*/ /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */
- /*0x18c 0x2a*/ /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */
- 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */
- 0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */
- 0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
- 0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
- 0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
- 0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
+ AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
+ AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */
+ AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */
+ AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
+ AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
+ AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
+ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
- 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+ AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
/* Slave 2 */
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
- 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
- 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
- 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
- 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* Slave 2 reset value*/
- 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nandflash_pins_s0: nandflash_pins_s0 {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 5d370d5..f3db13d 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -67,112 +67,112 @@
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
- 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
- 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
- 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
- 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
- 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
- 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
- 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
>;
};
emmc_pins: pinmux_emmc_pins {
pinctrl-single,pins = <
- 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
>;
};
};
@@ -285,10 +285,8 @@
};
};
-
-/include/ "tps65217.dtsi"
-
&tps {
+ compatible = "ti,tps65217";
/*
* Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
* mode") at poweroff. Most BeagleBone versions do not support RTC-only
@@ -309,12 +307,17 @@
ti,pmic-shutdown-controller;
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: regulator@0 {
+ reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
+ reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -324,6 +327,7 @@
};
dcdc3_reg: regulator@2 {
+ reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -333,21 +337,25 @@
};
ldo1_reg: regulator@3 {
+ reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
+ reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
+ reg = <5>;
regulator-name = "vdd_1v8";
regulator-always-on;
};
ldo4_reg: regulator@6 {
+ reg = <6>;
regulator-name = "vdd_3v3a";
regulator-always-on;
};
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index eadbba3..55c0e95 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -36,32 +36,32 @@
&am33xx_pinmux {
nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
pinctrl-single,pins = <
- 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
- 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
>;
};
nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
pinctrl-single,pins = <
- 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts
index 0f65bda..dce3c86 100644
--- a/arch/arm/boot/dts/am335x-bonegreen.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen.dts
@@ -36,8 +36,8 @@
&am33xx_pinmux {
uart2_pins: uart2_pins {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
- 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
+ AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
+ AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 310da20..15d47ab 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -37,26 +37,26 @@
&am33xx_pinmux {
usb1_drvvbus: usb1_drvvbus {
pinctrl-single,pins = <
- 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+ AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
>;
};
sd_pins: pinmux_sd_card {
pinctrl-single,pins = <
- 0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- 0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- 0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- 0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
led_gpio_pins: led_gpio_pins {
pinctrl-single,pins = <
- 0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
- 0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
+ AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
+ AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index 7e9a34d..fda457b 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -29,81 +29,81 @@
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- 0x13c (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* mdio_data.mdio_data */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
/* mdio_clk.mdio_clk */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nandflash_pins: nandflash_pins {
pinctrl-single,pins = <
- 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
};
@@ -128,16 +128,21 @@
};
-/include/ "tps65217.dtsi"
-
&tps {
+ compatible = "ti,tps65217";
+
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: regulator@0 {
+ reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
+ reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -147,6 +152,7 @@
};
dcdc3_reg: regulator@2 {
+ reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -156,24 +162,28 @@
};
ldo1_reg: regulator@3 {
+ reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: regulator@4 {
+ reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: regulator@5 {
+ reg = <5>;
regulator-name = "vdd_1v8";
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: regulator@6 {
+ reg = <6>;
regulator-name = "vdd_3v3d";
regulator-boot-on;
regulator-always-on;
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
new file mode 100644
index 0000000..42e9b66
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -0,0 +1,396 @@
+/*
+ * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+ model = "CompuLab CM-T335";
+ compatible = "compulab,cm-t335", "ti,am33xx";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>; /* 128 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_led_pins>;
+ led@0 {
+ label = "cm_t335:green";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; /* gpio2_0 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ /* regulator for mmc */
+ vmmc_fixed: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 0>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_pins>;
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ /* uart0_ctsn.i2c1_sda */
+ AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE2)
+ /* uart0_rtsn.i2c1_scl */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2)
+ >;
+ };
+
+ gpio_led_pins: pinmux_gpio_led_pins {
+ pinctrl-single,pins = <
+ /* gpmc_csn3.gpio2_0 */
+ AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7)
+ >;
+ };
+
+ nandflash_pins: pinmux_nandflash_pins {
+ pinctrl-single,pins = <
+ /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_wpn.gpio0_30 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)
+ /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+ /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+ /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+ /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+ /* gpmc_ben0_cle.gpmc_ben0_cle */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ /* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)
+ /* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ ecap0_pins: pinmux_ecap0_pins {
+ pinctrl-single,pins = <
+ /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ AM33XX_IOPAD(0x964, 0x0)
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ /* mii1_tx_en.rgmii1_tctl */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txd3.rgmii1_td3 */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txd2.rgmii1_td2 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txd1.rgmii1_td1 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txd0.rgmii1_td0 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txclk.rgmii1_tclk */
+ AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxd0.rgmii1_rd0 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+ /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ /* wl1271 bluetooth */
+ bluetooth_pins: pinmux_bluetooth_pins {
+ pinctrl-single,pins = <
+ /* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+/* WLS1271 bluetooth */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+
+status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+ /* CM-T335 board EEPROM */
+ eeprom: 24c02@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+ /* Real Time Clock */
+ ext_rtc: em3027@56 {
+ compatible = "emmicro,em3027";
+ reg = <0x56>;
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+&epwmss0 {
+ status = "okay";
+
+ ecap0: ecap@48300100 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+ };
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
+ ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ nand@0,0 {
+ reg = <0 0 0>; /* CS0, offset 0 */
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wait-on-read = "true";
+ gpmc,wait-on-write = "true";
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ /* MTD partition table */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "spl";
+ reg = <0x00000000 0x00200000>;
+ };
+ partition@1 {
+ label = "uboot";
+ reg = <0x00200000 0x00100000>;
+ };
+ partition@2 {
+ label = "uboot environment";
+ reg = <0x00300000 0x00100000>;
+ };
+ partition@3 {
+ label = "dtb";
+ reg = <0x00400000 0x00100000>;
+ };
+ partition@4 {
+ label = "splash";
+ reg = <0x00500000 0x00400000>;
+ };
+ partition@5 {
+ label = "linux";
+ reg = <0x00900000 0x00600000>;
+ };
+ partition@6 {
+ label = "rootfs";
+ reg = <0x00F00000 0>;
+ };
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ slaves = <1>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii-txid";
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d9d00ab..0d6a68c 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -83,14 +83,14 @@
label = "volume-up";
linux,code = <115>;
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup;
+ wakeup-source;
};
switch@10 {
label = "volume-down";
linux,code = <114>;
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
@@ -168,215 +168,215 @@
matrix_keypad_s0: matrix_keypad_s0 {
pinctrl-single,pins = <
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
- 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */
>;
};
volume_keys_s0: volume_keys_s0 {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */
- 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */
- 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
- 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
- 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
nandflash_pins_s0: nandflash_pins_s0 {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
- 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ AM33XX_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
- 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
- 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
- 0x4C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
- 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
- 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
- 0x8C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
>;
};
wlan_pins: pinmux_wlan_pins {
pinctrl-single,pins = <
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */
- 0x19C (PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */
- 0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */
+ AM33XX_IOPAD(0x99c, PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */
+ AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */
>;
};
lcd_pins_s0: lcd_pins_s0 {
pinctrl-single,pins = <
- 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
- 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
- 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
- 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
- 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
- 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
- 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
- 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
- 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
+ AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
+ AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
+ AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
+ AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
+ AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
+ AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
- 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
mcasp1_pins_sleep: mcasp1_pins_sleep {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
- 0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
- 0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+ AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
>;
};
};
@@ -743,8 +743,8 @@
&mmc3 {
/* these are on the crossbar and are outlined in the
xbar-event-map element */
- dmas = <&edma 12
- &edma 13>;
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
dma-names = "tx", "rx";
status = "okay";
vmmc-supply = <&wlan_en_reg>;
@@ -766,11 +766,6 @@
};
};
-&edma {
- ti,edma-xbar-event-map = /bits/ 16 <1 12
- 2 13>;
-};
-
&sham {
status = "okay";
};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 89442e9..282fe1b 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -123,7 +123,7 @@
label = "button2";
linux,code = <0x102>;
gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
- gpio-key,wakeup;
+ wakeup-source;
};
switch@4 {
@@ -204,234 +204,234 @@
lcd_pins_default: lcd_pins_default {
pinctrl-single,pins = <
- 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
- 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
- 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
- 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
- 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
- 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
- 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
- 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
- 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
+ AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
+ AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
+ AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
+ AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
+ AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
+ AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
>;
};
lcd_pins_sleep: lcd_pins_sleep {
pinctrl-single,pins = <
- 0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */
- 0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */
- 0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */
- 0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */
- 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */
- 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */
- 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */
- 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */
- 0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */
- 0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */
- 0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */
- 0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */
- 0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */
- 0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */
- 0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */
- 0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */
- 0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */
- 0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */
- 0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */
- 0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */
- 0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */
- 0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */
- 0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */
- 0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */
- 0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */
- 0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */
- 0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */
- 0xec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */
+ AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */
+ AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */
+ AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */
+ AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */
+ AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */
+ AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */
+ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */
+ AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */
>;
};
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
- 0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
- 0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
- 0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
- 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+ AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+ AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+ AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+ AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
>;
};
gpio_keys_s0: gpio_keys_s0 {
pinctrl-single,pins = <
- 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */
- 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
- 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
- 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */
+ AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */
+ AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
+ AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
ecap2_pins: backlight_pins {
pinctrl-single,pins = <
- 0x19c 0x4 /* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
+ AM33XX_IOPAD(0x99c, MUX_MODE4) /* mcasp0_ahclkr.ecap2_in_pwm2_out */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
/* Slave 2 */
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
- 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
- 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
- 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
- 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* Slave 2 reset value*/
- 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
- 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
mcasp1_pins_sleep: mcasp1_pins_sleep {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
- 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 5c5667a..d97b0ef 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -46,109 +46,109 @@
&am33xx_pinmux {
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
- 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
- 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
- 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
- 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
- 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */
/* Slave 2 */
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */
- 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */
- 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */
- 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */
- 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
- 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */
+ AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
+ AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */
/* Slave 2 reset value*/
- 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */
- 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */
- 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */
- 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */
- 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */
- 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
- 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */
+ AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */
+ AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */
+ AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
+ AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
emmc_pins: pinmux_emmc_pins {
pinctrl-single,pins = <
- 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 5ed4ca6..77559a1 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -41,121 +41,121 @@
misc_pins: misc_pins {
pinctrl-single,pins = <
- 0x15c (PIN_OUTPUT | MUX_MODE7) /* spi0_cs0.gpio0_5 */
+ AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7) /* spi0_cs0.gpio0_5 */
>;
};
gpmc_pins: gpmc_pins {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x20 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad8.gpmc_ad8 */
- 0x24 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad9.gpmc_ad9 */
- 0x28 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad10.gpmc_ad10 */
- 0x2c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad11.gpmc_ad11 */
- 0x30 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad12.gpmc_ad12 */
- 0x34 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad13.gpmc_ad13 */
- 0x38 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad14.gpmc_ad14 */
- 0x3c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad15.gpmc_ad15 */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad8.gpmc_ad8 */
+ AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad9.gpmc_ad9 */
+ AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad10.gpmc_ad10 */
+ AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad11.gpmc_ad11 */
+ AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad12.gpmc_ad12 */
+ AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad13.gpmc_ad13 */
+ AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad14.gpmc_ad14 */
+ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad15.gpmc_ad15 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x80 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn1.gpmc_csn1 */
- 0x84 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn2.gpmc_csn2 */
- 0x88 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn3.gpmc_csn3 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn1.gpmc_csn1 */
+ AM33XX_IOPAD(0x884, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn2.gpmc_csn2 */
+ AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn3.gpmc_csn3 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0_cle.gpmc_ben0_cle */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0_cle.gpmc_ben0_cle */
- 0xa4 (PIN_OUTPUT | MUX_MODE1) /* lcd_data1.gpmc_a1 */
- 0xa8 (PIN_OUTPUT | MUX_MODE1) /* lcd_data2.gpmc_a2 */
- 0xac (PIN_OUTPUT | MUX_MODE1) /* lcd_data3.gpmc_a3 */
- 0xb0 (PIN_OUTPUT | MUX_MODE1) /* lcd_data4.gpmc_a4 */
- 0xb4 (PIN_OUTPUT | MUX_MODE1) /* lcd_data5.gpmc_a5 */
- 0xb8 (PIN_OUTPUT | MUX_MODE1) /* lcd_data6.gpmc_a6 */
- 0xbc (PIN_OUTPUT | MUX_MODE1) /* lcd_data7.gpmc_a7 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE1) /* lcd_data1.gpmc_a1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE1) /* lcd_data2.gpmc_a2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE1) /* lcd_data3.gpmc_a3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE1) /* lcd_data4.gpmc_a4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE1) /* lcd_data5.gpmc_a5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE1) /* lcd_data6.gpmc_a6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE1) /* lcd_data7.gpmc_a7 */
- 0xe0 (PIN_OUTPUT | MUX_MODE1) /* lcd_vsync.gpmc_a8 */
- 0xe4 (PIN_OUTPUT | MUX_MODE1) /* lcd_hsync.gpmc_a9 */
- 0xe8 (PIN_OUTPUT | MUX_MODE1) /* lcd_pclk.gpmc_a10 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE1) /* lcd_vsync.gpmc_a8 */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE1) /* lcd_hsync.gpmc_a9 */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE1) /* lcd_pclk.gpmc_a10 */
>;
};
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
uart0_pins: uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: uart1_pins {
pinctrl-single,pins = <
- 0x178 (PIN_OUTPUT | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */
- 0x17c (PIN_OUTPUT | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */
- 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- 0x184 (PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x97c, PIN_OUTPUT | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */
>;
};
uart2_pins: uart2_pins {
pinctrl-single,pins = <
- 0xc0 (PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_data8.gpio2[14] */
- 0xc4 (PIN_OUTPUT | MUX_MODE7) /* lcd_data9.gpio2[15] */
- 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
- 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
+ AM33XX_IOPAD(0x8c0, PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_data8.gpio2[14] */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7) /* lcd_data9.gpio2[15] */
+ AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
+ AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
>;
};
uart3_pins: uart3_pins {
pinctrl-single,pins = <
- 0xc8 (PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data10.uart3_ctsn */
- 0xcc (PIN_OUTPUT | MUX_MODE6) /* lcd_data11.uart3_rtsn */
- 0x160 (PIN_INPUT | MUX_MODE1) /* spi0_cs1.uart3_rxd */
- 0x164 (PIN_OUTPUT | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
+ AM33XX_IOPAD(0x8c8, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data10.uart3_ctsn */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE6) /* lcd_data11.uart3_rtsn */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE1) /* spi0_cs1.uart3_rxd */
+ AM33XX_IOPAD(0x964, PIN_OUTPUT | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
>;
};
uart4_pins: uart4_pins {
pinctrl-single,pins = <
- 0xd0 (PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data12.uart4_ctsn */
- 0xd4 (PIN_OUTPUT | MUX_MODE6) /* lcd_data13.uart4_rtsn */
- 0x168 (PIN_INPUT | MUX_MODE1) /* uart0_ctsn.uart4_rxd */
- 0x16c (PIN_OUTPUT | MUX_MODE1) /* uart0_rtsn.uart4_txd */
+ AM33XX_IOPAD(0x8d0, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data12.uart4_ctsn */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE6) /* lcd_data13.uart4_rtsn */
+ AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE1) /* uart0_ctsn.uart4_rxd */
+ AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE1) /* uart0_rtsn.uart4_txd */
>;
};
uart5_pins: uart5_pins {
pinctrl-single,pins = <
- 0xd8 (PIN_INPUT | MUX_MODE4) /* lcd_data14.uart5_rxd */
- 0x144 (PIN_OUTPUT | MUX_MODE3) /* rmiii1_refclk.uart5_txd */
+ AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE4) /* lcd_data14.uart5_rxd */
+ AM33XX_IOPAD(0x944, PIN_OUTPUT | MUX_MODE3) /* rmiii1_refclk.uart5_txd */
>;
};
mmc1_pins: mmc1_pins {
pinctrl-single,pins = <
- 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
- 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
+ AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */
>;
};
};
@@ -375,11 +375,15 @@
wp-gpios = <&gpio3 18 0>;
};
-#include "tps65217.dtsi"
-
&tps {
+ compatible = "ti,tps65217";
+
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: regulator@0 {
+ reg = <0>;
/* +1.5V voltage with ±4% tolerance */
regulator-min-microvolt = <1450000>;
regulator-max-microvolt = <1550000>;
@@ -388,6 +392,7 @@
};
dcdc2_reg: regulator@1 {
+ reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <915000>;
@@ -397,6 +402,7 @@
};
dcdc3_reg: regulator@2 {
+ reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <915000>;
@@ -406,6 +412,7 @@
};
ldo1_reg: regulator@3 {
+ reg = <3>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
@@ -414,6 +421,7 @@
};
ldo2_reg: regulator@4 {
+ reg = <4>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;
@@ -422,6 +430,7 @@
};
ldo3_reg: regulator@5 {
+ reg = <5>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
@@ -430,6 +439,7 @@
};
ldo4_reg: regulator@6 {
+ reg = <6>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 7106114..471a3a7 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -93,14 +93,14 @@
&am33xx_pinmux {
i2c0_pins: pinmux_i2c0 {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: pinmux_i2c1 {
pinctrl-single,pins = <
- 0x10C (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_crs,i2c1_sda */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_rxerr,i2c1_scl */
+ AM33XX_IOPAD(0x90C, PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_crs,i2c1_sda */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_rxerr,i2c1_scl */
>;
};
};
@@ -130,7 +130,7 @@
&am33xx_pinmux {
accel_pins: pinmux_accel {
pinctrl-single,pins = <
- 0x98 (PIN_INPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */
+ AM33XX_IOPAD(0x898, PIN_INPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */
>;
};
};
@@ -177,12 +177,12 @@
&am33xx_pinmux {
audio_pins: pinmux_audio {
pinctrl-single,pins = <
- 0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
- 0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
- 0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
- 0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
- 0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
- 0x40 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a0.gpio1_16 */
+ AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+ AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
+ AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
+ AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
+ AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7) /* gpmc_a0.gpio1_16 */
>;
};
};
@@ -228,36 +228,36 @@
&am33xx_pinmux {
lcd_pins: pinmux_lcd {
pinctrl-single,pins = <
- 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data16 */
- 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data17 */
- 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data18 */
- 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data19 */
- 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data20 */
- 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data21 */
- 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data22 */
- 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data23 */
- 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data16 */
+ AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data17 */
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data18 */
+ AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data19 */
+ AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data20 */
+ AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data21 */
+ AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data22 */
+ AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data23 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
/* Display Enable */
- 0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a11.gpio1_27 */
+ AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a11.gpio1_27 */
>;
};
};
@@ -291,29 +291,29 @@
&am33xx_pinmux {
ethernet_pins: pinmux_ethernet {
pinctrl-single,pins = <
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
- 0x134 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */
- 0x138 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */
- 0x13c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
/* ethernet interrupt */
- 0x144 (PIN_INPUT_PULLUP | MUX_MODE7) /* rmii2_refclk.gpio0_29 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLUP | MUX_MODE7) /* rmii2_refclk.gpio0_29 */
/* ethernet PHY nReset */
- 0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* mii1_col.gpio3_0 */
+ AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLUP | MUX_MODE7) /* mii1_col.gpio3_0 */
>;
};
mdio_pins: pinmux_mdio {
pinctrl-single,pins = <
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
};
@@ -339,13 +339,6 @@
ti,non-removable;
};
-&edma {
- /* Map eDMA MMC2 Events from Crossbar */
- ti,edma-xbar-event-map = /bits/ 16 <1 12
- 2 13>;
-};
-
-
&mmc3 {
/* Wifi & Bluetooth on MMC #3 */
status = "okay";
@@ -354,8 +347,8 @@
vmmmc-supply = <&v3v3c_reg>;
bus-width = <4>;
ti,non-removable;
- dmas = <&edma 12
- &edma 13>;
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
dma-names = "tx", "rx";
};
@@ -363,45 +356,45 @@
&am33xx_pinmux {
sd_pins: pinmux_sd_card {
pinctrl-single,pins = <
- 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
emmc_pins: pinmux_emmc {
pinctrl-single,pins = <
- 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
/* EMMC nReset */
- 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
>;
};
wireless_pins: pinmux_wireless {
pinctrl-single,pins = <
- 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
- 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
- 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
- 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */
- 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
- 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc1_clk */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
+ AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
+ AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */
+ AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc1_clk */
/* WLAN nReset */
- 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
/* WLAN nPower down */
- 0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
+ AM33XX_IOPAD(0x870, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
/* 32kHz Clock */
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
};
@@ -427,9 +420,9 @@
vin-supply = <&vbat>;
};
-/include/ "tps65217.dtsi"
-
&tps {
+ compatible = "ti,tps65217";
+
backlight {
isel = <1>; /* ISET1 */
fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
@@ -437,12 +430,17 @@
};
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: regulator@0 {
+ reg = <0>;
/* VDD_1V8 system supply */
regulator-always-on;
};
dcdc2_reg: regulator@1 {
+ reg = <1>;
/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -452,6 +450,7 @@
};
dcdc3_reg: regulator@2 {
+ reg = <2>;
/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -461,18 +460,21 @@
};
ldo1_reg: regulator@3 {
+ reg = <3>;
/* VRTC 1.8V always-on supply */
regulator-name = "vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
+ reg = <4>;
/* 3.3V rail */
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
+ reg = <5>;
/* VDD_3V3A 3.3V rail */
regulator-name = "vdd_3v3a";
regulator-min-microvolt = <3300000>;
@@ -480,6 +482,7 @@
};
ldo4_reg: regulator@6 {
+ reg = <6>;
/* VDD_3V3B 3.3V rail */
regulator-name = "vdd_3v3b";
regulator-always-on;
@@ -497,10 +500,10 @@
&am33xx_pinmux {
spi0_pins: pinmux_spi0 {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
- 0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
- 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
- 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+ AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
>;
};
};
@@ -538,16 +541,16 @@
&am33xx_pinmux {
uart0_pins: pinmux_uart0 {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: pinmux_uart1 {
pinctrl-single,pins = <
- 0x178 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
- 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
- 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
>;
};
};
@@ -590,9 +593,9 @@
usb_pins: pinmux_usb {
pinctrl-single,pins = <
/* USB0 Over-Current (active low) */
- 0x64 (PIN_INPUT | MUX_MODE7) /* gpmc_a9.gpio1_25 */
+ AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7) /* gpmc_a9.gpio1_25 */
/* USB1 Over-Current (active low) */
- 0x68 (PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */
>;
};
};
@@ -627,37 +630,37 @@
label = "home";
linux,code = <KEY_HOME>;
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup;
+ wakeup-source;
};
button@1 {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup;
+ wakeup-source;
};
buttons@2 {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
&am33xx_pinmux {
user_leds_pins: pinmux_user_leds {
pinctrl-single,pins = <
- 0x50 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a4.gpio1_20 */
- 0x54 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE7) /* gpmc_a4.gpio1_20 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */
>;
};
user_buttons_pins: pinmux_user_buttons {
pinctrl-single,pins = <
- 0x58 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- 0x5C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a7.gpio1_21 */
- 0x164 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio0_7 */
+ AM33XX_IOPAD(0x858, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_IOPAD(0x85C, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a7.gpio1_21 */
+ AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio0_7 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 2f43e45..c20ae6c 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -56,22 +56,22 @@
&am33xx_pinmux {
ethernet0_pins: pinmux_ethernet0 {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
- 0x114 (PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */
- 0x124 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- 0x128 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
>;
};
mdio_pins: pinmux_mdio {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
};
@@ -103,8 +103,8 @@
&am33xx_pinmux {
i2c0_pins: pinmux_i2c0 {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
};
@@ -137,20 +137,20 @@
&am33xx_pinmux {
nandflash_pins: pinmux_nandflash {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
};
@@ -324,10 +324,10 @@
&am33xx_pinmux {
spi0_pins: pinmux_spi0 {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_clk.spi0_clk */
- 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d0.spi0_d0 */
- 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
- 0x15c (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_clk.spi0_clk */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts
new file mode 100644
index 0000000..917d7cc
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sbc-t335.dts
@@ -0,0 +1,219 @@
+/*
+ * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am335x-cm-t335.dts"
+
+/ {
+ model = "CompuLab CM-T335 on SB-T335";
+ compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx";
+
+ /* DRM display driver */
+ panel {
+ compatible = "ti,tilcdc,panel";
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcd_pins_default>;
+ pinctrl-1 = <&lcd_pins_sleep>;
+
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <32>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+ display-timings {
+ /* Timing selection performed by U-Boot */
+ timing0: lcd {/* 800x480p62 */
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <39>;
+ hback-porch = <39>;
+ hsync-len = <47>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <2>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ timing1: dvi { /* 1024x768p60 */
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ hfront-porch = <24>;
+ hback-porch = <160>;
+ hsync-len = <136>;
+ vactive = <768>;
+ vfront-porch = <3>;
+ vback-porch = <29>;
+ vsync-len = <6>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
+};
+
+&am33xx_pinmux {
+ /* Display */
+ lcd_pins_default: lcd_pins_default {
+ pinctrl-single,pins = <
+ /* gpmc_ad8.lcd_data23 */
+ AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad9.lcd_data22 */
+ AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad10.lcd_data21 */
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad11.lcd_data20 */
+ AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad12.lcd_data19 */
+ AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad13.lcd_data18 */
+ AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad14.lcd_data17 */
+ AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad15.lcd_data16 */
+ AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)
+ /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)
+ >;
+ };
+
+ lcd_pins_sleep: lcd_pins_sleep {
+ pinctrl-single,pins = <
+ /* gpmc_ad8.lcd_data23 */
+ AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad9.lcd_data22 */
+ AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad10.lcd_data21 */
+ AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad11.lcd_data20 */
+ AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad12.lcd_data19 */
+ AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad13.lcd_data18 */
+ AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad14.lcd_data17 */
+ AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad15.lcd_data16 */
+ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)
+ /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+};
+
+&i2c0 {
+ /* GPIO extender */
+ gpio_ext: pca9555@26 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x26>;
+ dvi_ena {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "dvi-enable";
+ };
+ lcd_ena {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "lcd-enable";
+ };
+ };
+};
+
+/* Display */
+&lcdc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
new file mode 100644
index 0000000..1b5b044
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -0,0 +1,577 @@
+/*
+ * support for the bosch am335x based shc c3 board
+ *
+ * Copyright, C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Bosch SHC";
+ compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
+
+ aliases {
+ mmcblk0 = &mmc1;
+ mmcblk1 = &mmc2;
+ };
+
+ cpus {
+ cpu@0 {
+ /*
+ * To consider voltage drop between PMIC and SoC,
+ * tolerance value is reduced to 2% from 4% and
+ * voltage value is increased as a precaution.
+ */
+ operating-points = <
+ /* kHz uV */
+ 594000 1225000
+ 294000 1125000
+ >;
+ voltage-tolerance = <2>; /* 2 percentage */
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ back_button {
+ label = "Back Button";
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_BACK>;
+ debounce-interval = <1000>;
+ gpio-key,wakeup;
+ };
+
+ front_button {
+ label = "Front Button";
+ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_FRONT>;
+ debounce-interval = <1000>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "shc:power:red";
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "shc:power:bl";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ default-state = "on";
+ };
+
+ led@3 {
+ label = "shc:lan:red";
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@4 {
+ label = "shc:lan:bl";
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@5 {
+ label = "shc:cloud:red";
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@6 {
+ label = "shc:cloud:bl";
+ gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ vmmcsd_fixed: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&aes {
+ status = "okay";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+
+ ethernetphy0: ethernet-phy@0 {
+ reg = <0>;
+ smsc,disable-energy-detect;
+ };
+};
+
+&epwmss1 {
+ status = "okay";
+
+ ehrpwm1: ehrpwm@48302200 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehrpwm1_pins>;
+ status = "okay";
+ };
+};
+
+&gpio1 {
+ hmtc_rst {
+ gpio-hog;
+ gpios = <24 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "homematic_reset";
+ };
+
+ hmtc_prog {
+ gpio-hog;
+ gpios = <27 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "homematic_program";
+ };
+};
+
+&gpio3 {
+ zgb_rst {
+ gpio-hog;
+ gpios = <18 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "zigbee_reset";
+ };
+
+ zgb_boot {
+ gpio-hog;
+ gpios = <19 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "zigbee_boot";
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ at24@50 {
+ compatible = "at24,24c32";
+ pagesize = <32>;
+ reg = <0x50>;
+ };
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+ slaves = <1>;
+ cpsw_emac0: slave@4a100200 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "mii";
+ phy-handle = <ðernetphy0>;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ bus-width = <0x4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+ max-frequency = <26000000>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ max-frequency = <26000000>;
+ sd-uhs-sdr25;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+ bus-width = <4>;
+ cap-power-off-card;
+ max-frequency = <26000000>;
+ sd-uhs-sdr25;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&rtc {
+ ti,no-init;
+};
+
+&sham {
+ status = "okay";
+};
+
+&tps {
+ compatible = "ti,tps65217";
+ ti,pmic-shutdown-controller;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dcdc1_reg: regulator@0 {
+ reg = <0>;
+ regulator-name = "vdds_dpr";
+ regulator-compatible = "dcdc1";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ reg = <1>;
+ /*
+ * VDD_MPU voltage limits 0.95V - 1.26V with
+ * +/-4% tolerance
+ */
+ regulator-compatible = "dcdc2";
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <70000>;
+ };
+
+ dcdc3_reg: regulator@2 {
+ reg = <2>;
+ /*
+ * VDD_CORE voltage limits 0.95V - 1.1V with
+ * +/-4% tolerance
+ */
+ regulator-name = "vdd_core";
+ regulator-compatible = "dcdc3";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ reg = <3>;
+ regulator-name = "vio,vrtc,vdds";
+ regulator-compatible = "ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ reg = <4>;
+ regulator-name = "vdd_3v3aux";
+ regulator-compatible = "ldo2";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ reg = <5>;
+ regulator-name = "vdd_1v8";
+ regulator-compatible = "ldo3";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ reg = <6>;
+ regulator-name = "vdd_3v3a";
+ regulator-compatible = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clkout2_pin>;
+
+ clkout2_pin: pinmux_clkout2_pin {
+ pinctrl-single,pins = <
+ /* xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6)
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+ /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ ehrpwm1_pins: pinmux_ehrpwm1 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
+ >;
+ };
+
+ emmc_pins: pinmux_emmc_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2)
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5)
+ >;
+ };
+
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3)
+ AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3)
+ AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3)
+ AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3)
+ AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3)
+ AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3)
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: pinmux_uart1 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)
+ AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)
+ >;
+ };
+
+ uart4_pins: pinmux_uart4_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)
+ AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6)
+ >;
+ };
+
+ user_leds_s0: user_leds_s0 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index 3303c28..d38edfa 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -375,16 +375,19 @@
pinctrl-0 = <&uart4_pins>;
};
-#include "tps65217.dtsi"
-
&tps {
+ compatible = "ti,tps65217";
ti,pmic-shutdown-controller;
interrupt-parent = <&intc>;
interrupts = <7>; /* NNMI */
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: regulator@0 {
+ reg = <0>;
/* VDDS_DDR */
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
@@ -392,6 +395,7 @@
};
dcdc2_reg: regulator@1 {
+ reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -401,6 +405,7 @@
};
dcdc3_reg: regulator@2 {
+ reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -410,6 +415,7 @@
};
ldo1_reg: regulator@3 {
+ reg = <3>;
/* VRTC / VIO / VDDS*/
regulator-always-on;
regulator-min-microvolt = <1800000>;
@@ -417,6 +423,7 @@
};
ldo2_reg: regulator@4 {
+ reg = <4>;
/* VDD_3V3AUX */
regulator-always-on;
regulator-min-microvolt = <3300000>;
@@ -424,6 +431,7 @@
};
ldo3_reg: regulator@5 {
+ reg = <5>;
/* VDD_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -431,6 +439,7 @@
};
ldo4_reg: regulator@6 {
+ reg = <6>;
/* VDD_3V3A */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 2cecb39..282f6d4 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -28,8 +28,8 @@
&am33xx_pinmux {
dcan1_pins: pinmux_dcan1 {
pinctrl-single,pins = <
- 0x168 (PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
- 0x16c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+ AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
>;
};
};
@@ -44,20 +44,20 @@
&am33xx_pinmux {
ethernet1_pins: pinmux_ethernet1 {
pinctrl-single,pins = <
- 0x40 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a0.mii2_txen */
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a1.mii2_rxdv */
- 0x48 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a2.mii2_txd3 */
- 0x4c (PIN_OUTPUT | MUX_MODE1) /* gpmc_a3.mii2_txd2 */
- 0x50 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a4.mii2_txd1 */
- 0x54 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a5.mii2_txd0 */
- 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a6.mii2_txclk */
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a7.mii2_rxclk */
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a8.mii2_rxd3 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a9.mii2_rxd2 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a10.mii2_rxd1 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a11.mii2_rxd0 */
- 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_wpn.mii2_rxerr */
- 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_ben1.mii2_col */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* gpmc_a0.mii2_txen */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a1.mii2_rxdv */
+ AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* gpmc_a2.mii2_txd3 */
+ AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* gpmc_a3.mii2_txd2 */
+ AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* gpmc_a4.mii2_txd1 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* gpmc_a5.mii2_txd0 */
+ AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a6.mii2_txclk */
+ AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a7.mii2_rxclk */
+ AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a8.mii2_rxd3 */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a9.mii2_rxd2 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a10.mii2_rxd1 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a11.mii2_rxd0 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_wpn.mii2_rxerr */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_ben1.mii2_col */
>;
};
};
@@ -79,13 +79,13 @@
&am33xx_pinmux {
mmc1_pins: pinmux_mmc1 {
pinctrl-single,pins = <
- 0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- 0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- 0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- 0x0FC (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- 0x160 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
>;
};
};
@@ -103,17 +103,17 @@
&am33xx_pinmux {
uart0_pins: pinmux_uart0 {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
- 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
- 0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
>;
};
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d23e252..04885f9 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -161,6 +161,14 @@
mboxes = <&mailbox &mbox_wkupm3>;
};
+ edma_xbar: dma-router@f90 {
+ compatible = "ti,am335x-edma-crossbar";
+ reg = <0xf90 0x40>;
+ #dma-cells = <3>;
+ dma-requests = <32>;
+ dma-masters = <&edma>;
+ };
+
scm_clockdomains: clockdomains {
};
};
@@ -174,12 +182,44 @@
};
edma: edma@49000000 {
- compatible = "ti,edma3";
- ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
- reg = <0x49000000 0x10000>,
- <0x44e10f90 0x40>;
+ compatible = "ti,edma3-tpcc";
+ ti,hwmods = "tpcc";
+ reg = <0x49000000 0x10000>;
+ reg-names = "edma3_cc";
interrupts = <12 13 14>;
- #dma-cells = <1>;
+ interrupt-names = "edma3_ccint", "emda3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+ <&edma_tptc2 0>;
+
+ ti,edma-memcpy-channels = <20 21>;
+ };
+
+ edma_tptc0: tptc@49800000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc0";
+ reg = <0x49800000 0x100000>;
+ interrupts = <112>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc1: tptc@49900000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc1";
+ reg = <0x49900000 0x100000>;
+ interrupts = <113>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc2: tptc@49a00000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc2";
+ reg = <0x49a00000 0x100000>;
+ interrupts = <114>;
+ interrupt-names = "edma3_tcerrint";
};
gpio0: gpio@44e07000 {
@@ -233,7 +273,7 @@
reg = <0x44e09000 0x2000>;
interrupts = <72>;
status = "disabled";
- dmas = <&edma 26>, <&edma 27>;
+ dmas = <&edma 26 0>, <&edma 27 0>;
dma-names = "tx", "rx";
};
@@ -244,7 +284,7 @@
reg = <0x48022000 0x2000>;
interrupts = <73>;
status = "disabled";
- dmas = <&edma 28>, <&edma 29>;
+ dmas = <&edma 28 0>, <&edma 29 0>;
dma-names = "tx", "rx";
};
@@ -255,7 +295,7 @@
reg = <0x48024000 0x2000>;
interrupts = <74>;
status = "disabled";
- dmas = <&edma 30>, <&edma 31>;
+ dmas = <&edma 30 0>, <&edma 31 0>;
dma-names = "tx", "rx";
};
@@ -322,8 +362,8 @@
ti,dual-volt;
ti,needs-special-reset;
ti,needs-special-hs-handling;
- dmas = <&edma 24
- &edma 25>;
+ dmas = <&edma_xbar 24 0 0
+ &edma_xbar 25 0 0>;
dma-names = "tx", "rx";
interrupts = <64>;
interrupt-parent = <&intc>;
@@ -335,8 +375,8 @@
compatible = "ti,omap4-hsmmc";
ti,hwmods = "mmc2";
ti,needs-special-reset;
- dmas = <&edma 2
- &edma 3>;
+ dmas = <&edma 2 0
+ &edma 3 0>;
dma-names = "tx", "rx";
interrupts = <28>;
interrupt-parent = <&intc>;
@@ -474,10 +514,10 @@
interrupts = <65>;
ti,spi-num-cs = <2>;
ti,hwmods = "spi0";
- dmas = <&edma 16
- &edma 17
- &edma 18
- &edma 19>;
+ dmas = <&edma 16 0
+ &edma 17 0
+ &edma 18 0
+ &edma 19 0>;
dma-names = "tx0", "rx0", "tx1", "rx1";
status = "disabled";
};
@@ -490,10 +530,10 @@
interrupts = <125>;
ti,spi-num-cs = <2>;
ti,hwmods = "spi1";
- dmas = <&edma 42
- &edma 43
- &edma 44
- &edma 45>;
+ dmas = <&edma 42 0
+ &edma 43 0
+ &edma 44 0
+ &edma 45 0>;
dma-names = "tx0", "rx0", "tx1", "rx1";
status = "disabled";
};
@@ -819,6 +859,8 @@
ti,no-idle-on-init;
reg = <0x50000000 0x2000>;
interrupts = <100>;
+ dmas = <&edma 52>;
+ dma-names = "rxtx";
gpmc,num-cs = <7>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
@@ -831,7 +873,7 @@
ti,hwmods = "sham";
reg = <0x53100000 0x200>;
interrupts = <109>;
- dmas = <&edma 36>;
+ dmas = <&edma 36 0>;
dma-names = "rx";
};
@@ -840,8 +882,8 @@
ti,hwmods = "aes";
reg = <0x53500000 0xa0>;
interrupts = <103>;
- dmas = <&edma 6>,
- <&edma 5>;
+ dmas = <&edma 6 0>,
+ <&edma 5 0>;
dma-names = "tx", "rx";
};
@@ -854,8 +896,8 @@
interrupts = <80>, <81>;
interrupt-names = "tx", "rx";
status = "disabled";
- dmas = <&edma 8>,
- <&edma 9>;
+ dmas = <&edma 8 2>,
+ <&edma 9 2>;
dma-names = "tx", "rx";
};
@@ -868,8 +910,8 @@
interrupts = <82>, <83>;
interrupt-names = "tx", "rx";
status = "disabled";
- dmas = <&edma 10>,
- <&edma 11>;
+ dmas = <&edma 10 2>,
+ <&edma 11 2>;
dma-names = "tx", "rx";
};
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
index 2d40b3f..cb7de1d 100644
--- a/arch/arm/boot/dts/am3517-craneboard.dts
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -77,7 +77,7 @@
&omap3_pmx_core {
tps_pins: pinmux_tps_pins {
pinctrl-single,pins = <
- 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
+ OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
>;
};
};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index d83ff9c..dcae0d6 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -30,6 +30,7 @@
serial5 = &uart5;
ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1;
+ spi0 = &qspi;
};
cpus {
@@ -171,6 +172,14 @@
mboxes = <&mailbox &mbox_wkupm3>;
};
+ edma_xbar: dma-router@f90 {
+ compatible = "ti,am335x-edma-crossbar";
+ reg = <0xf90 0x40>;
+ #dma-cells = <3>;
+ dma-requests = <64>;
+ dma-masters = <&edma>;
+ };
+
scm_clockdomains: clockdomains {
};
};
@@ -183,14 +192,46 @@
};
edma: edma@49000000 {
- compatible = "ti,edma3";
- ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
- reg = <0x49000000 0x10000>,
- <0x44e10f90 0x10>;
+ compatible = "ti,edma3-tpcc";
+ ti,hwmods = "tpcc";
+ reg = <0x49000000 0x10000>;
+ reg-names = "edma3_cc";
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_ccint", "emda3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+ <&edma_tptc2 0>;
+
+ ti,edma-memcpy-channels = <32 33>;
+ };
+
+ edma_tptc0: tptc@49800000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc0";
+ reg = <0x49800000 0x100000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc1: tptc@49900000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc1";
+ reg = <0x49900000 0x100000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc2: tptc@49a00000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc2";
+ reg = <0x49a00000 0x100000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
};
uart0: serial@44e09000 {
@@ -495,8 +536,8 @@
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
- dmas = <&edma 24
- &edma 25>;
+ dmas = <&edma 24 0>,
+ <&edma 25 0>;
dma-names = "tx", "rx";
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -507,8 +548,8 @@
reg = <0x481d8000 0x1000>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
- dmas = <&edma 2
- &edma 3>;
+ dmas = <&edma 2 0>,
+ <&edma 3 0>;
dma-names = "tx", "rx";
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -776,7 +817,7 @@
compatible = "ti,omap5-sham";
ti,hwmods = "sham";
reg = <0x53100000 0x300>;
- dmas = <&edma 36>;
+ dmas = <&edma 36 0>;
dma-names = "rx";
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -786,8 +827,8 @@
ti,hwmods = "aes";
reg = <0x53501000 0xa0>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma 6
- &edma 5>;
+ dmas = <&edma 6 0>,
+ <&edma 5 0>;
dma-names = "tx", "rx";
};
@@ -796,8 +837,8 @@
ti,hwmods = "des";
reg = <0x53701000 0xa0>;
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma 34
- &edma 33>;
+ dmas = <&edma 34 0>,
+ <&edma 33 0>;
dma-names = "tx", "rx";
};
@@ -810,8 +851,8 @@
interrupts = <80>, <81>;
interrupt-names = "tx", "rx";
status = "disabled";
- dmas = <&edma 8>,
- <&edma 9>;
+ dmas = <&edma 8 2>,
+ <&edma 9 2>;
dma-names = "tx", "rx";
};
@@ -824,8 +865,8 @@
interrupts = <82>, <83>;
interrupt-names = "tx", "rx";
status = "disabled";
- dmas = <&edma 10>,
- <&edma 11>;
+ dmas = <&edma 10 2>,
+ <&edma 11 2>;
dma-names = "tx", "rx";
};
@@ -842,6 +883,8 @@
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
+ dmas = <&edma 52>;
+ dma-names = "rxtx";
clocks = <&l3s_gclk>;
clock-names = "fck";
reg = <0x50000000 0x2000>;
@@ -963,7 +1006,9 @@
qspi: qspi@47900000 {
compatible = "ti,am4372-qspi";
- reg = <0x47900000 0x100>;
+ reg = <0x47900000 0x100>,
+ <0x30000000 0x4000000>;
+ reg-names = "qspi_base", "qspi_mmap";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "qspi";
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
new file mode 100644
index 0000000..8677f4c
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -0,0 +1,422 @@
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am4372.dtsi"
+
+/ {
+ model = "CompuLab CM-T43";
+ compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+ leds {
+ compatible = "gpio-leds";
+
+ ledb {
+ label = "cm-t43:green";
+ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vmmc_3v3: fixedregulator-v3_3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ enable-active-high;
+ };
+};
+
+&am43xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cm_t43_led_pins>;
+
+ cm_t43_led_pins: cm_t43_led_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa78, MUX_MODE7)
+ >;
+ };
+
+ i2c0_pins: i2c0_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ emmc_pins: emmc_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0 */
+ AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1 */
+ AM4372_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2 */
+ AM4372_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3 */
+ AM4372_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad12.mmc1_dat4 */
+ AM4372_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad13.mmc1_dat5 */
+ AM4372_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad14.mmc1_dat6 */
+ AM4372_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad15.mmc1_dat7 */
+ AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ >;
+ };
+
+ spi0_pins: pinmux_spi0_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+ AM4372_IOPAD(0x954, PIN_INPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM4372_IOPAD(0x958, PIN_OUTPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ AM4372_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ >;
+ };
+
+ nand_flash_x8: nand_flash_x8 {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x800, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x804, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x808, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x80c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x810, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x814, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x818, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x81c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x898, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM4372_IOPAD(0x894, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM4372_IOPAD(0x890, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM4372_IOPAD(0x89c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
+ AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
+ AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
+ AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
+ AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
+ AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
+ AM4372_IOPAD(0xa74, MUX_MODE3)
+ /* Slave 2 */
+ AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.txen */
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rxctl */
+ AM4372_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.txd3 */
+ AM4372_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.txd2 */
+ AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.txd1 */
+ AM4372_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.txd0 */
+ AM4372_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.tclk */
+ AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rclk */
+ AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rxd3 */
+ AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rxd2 */
+ AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rxd1 */
+ AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rxd0 */
+ AM4372_IOPAD(0xa38, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_flash_x8>;
+ ranges = <0 0 0x08000000 0x1000000>;
+ nand@0,0 {
+ reg = <0 0 0>;
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wait-on-read = "true";
+ gpmc,wait-on-write = "true";
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ gpmc,wait-pin = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* MTD partition table */
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x00980000>;
+ };
+ partition@980000 {
+ label = "dtb";
+ reg = <0x00980000 0x00080000>;
+ };
+ partition@a00000 {
+ label = "rootfs";
+ reg = <0x00a00000 0x0>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <100000>;
+
+ tps65218: tps65218@24 {
+ compatible = "ti,tps65218";
+ reg = <0x24>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ compatible = "ti,tps65218-dcdc1";
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2: regulator-dcdc2 {
+ compatible = "ti,tps65218-dcdc2";
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3: regulator-dcdc3 {
+ compatible = "ti,tps65218-dcdc3";
+ regulator-name = "vdcdc3";
+ regulator-suspend-enable;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc5: regulator-dcdc5 {
+ compatible = "ti,tps65218-dcdc5";
+ regulator-name = "v1_0bat";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc6: regulator-dcdc6 {
+ compatible = "ti,tps65218-dcdc6";
+ regulator-name = "v1_8bat";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: regulator-ldo1 {
+ compatible = "ti,tps65218-ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+
+ eeprom_module: at24@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&gpio4 {
+ status = "okay";
+};
+
+&gpio5 {
+ status = "okay";
+};
+
+&mmc2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ vmmc-supply = <&vmmc_3v3>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ dmas = <&edma 16
+ &edma 17>;
+ dma-names = "tx0", "rx0";
+
+ flash: w25q64cvzpig@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0xc0000>;
+ };
+
+ partition@c0000 {
+ label = "uboot environment";
+ reg = <0xc0000 0x40000>;
+ };
+
+ partition@100000 {
+ label = "reserved";
+ reg = <0x100000 0x100000>;
+ };
+ };
+};
+
+&mac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpsw_default>;
+ dual_emac = <1>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&davinci_mdio_default>;
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii-txid";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "rgmii-txid";
+ dual_emac_res_vlan = <2>;
+};
+
+&dwc3_1 {
+ status = "okay";
+};
+
+&usb2_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&dwc3_2 {
+ status = "okay";
+};
+
+&usb2_phy2 {
+ status = "okay";
+};
+
+&usb2 {
+ dr_mode = "host";
+ status = "okay";
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral", "host", "otg";
+};
+
+&elm {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&tscadc {
+ status = "okay";
+ tsc {
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordiante-readouts = <5>;
+ ti,wire-config = <0x00 0x11 0x22 0x33>;
+ };
+
+ adc {
+ ti,adc-channels = <4 5 6 7>;
+ };
+};
+
+&cpu {
+ cpu0-supply = <&dcdc2>;
+ operating-points = <1000000 1330000>,
+ <800000 1260000>,
+ <720000 1200000>,
+ <600000 1100000>,
+ <300000 950000>;
+};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index d2450ab..64d4332 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -154,138 +154,138 @@
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: i2c1_pins {
pinctrl-single,pins = <
- 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
- 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
- 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
>;
};
pixcir_ts_pins: pixcir_ts_pins {
pinctrl-single,pins = <
- 0x264 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */
+ AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
- 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
+ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
+ AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
+ AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
+ AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
+ AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
+ AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nand_flash_x8: nand_flash_x8 {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM4372_IOPAD(0x800, PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM4372_IOPAD(0x804, PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM4372_IOPAD(0x808, PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM4372_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM4372_IOPAD(0x810, PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM4372_IOPAD(0x814, PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM4372_IOPAD(0x818, PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM4372_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
+ AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
dss_pins: dss_pins {
pinctrl-single,pins = <
- 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
- 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
- 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
- 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
- 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
- 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
- 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
- 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+ AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+ AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+ AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
>;
};
@@ -293,208 +293,208 @@
display_mux_pins: display_mux_pins {
pinctrl-single,pins = <
/* GPIO 5_8 to select LCD / HDMI */
- 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
dcan0_default: dcan0_default_pins {
pinctrl-single,pins = <
- 0x178 (PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
- 0x17c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
+ AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
+ AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
>;
};
dcan0_sleep: dcan0_sleep_pins {
pinctrl-single,pins = <
- 0x178 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
- 0x17c (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
+ AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
+ AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
>;
};
dcan1_default: dcan1_default_pins {
pinctrl-single,pins = <
- 0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
- 0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
+ AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
+ AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
>;
};
dcan1_sleep: dcan1_sleep_pins {
pinctrl-single,pins = <
- 0x180 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */
- 0x184 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */
+ AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */
+ AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */
>;
};
vpfe0_pins_default: vpfe0_pins_default {
pinctrl-single,pins = <
- 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
- 0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
- 0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
- 0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
- 0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
- 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
- 0x20C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
- 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
- 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
- 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
- 0x21C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
- 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
- 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
>;
};
vpfe0_pins_sleep: vpfe0_pins_sleep {
pinctrl-single,pins = <
- 0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
- 0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
- 0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
- 0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
- 0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
- 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
- 0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
- 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
- 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
- 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
- 0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
- 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
- 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
+ AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
+ AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
+ AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
+ AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
+ AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
+ AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
+ AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
+ AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
+ AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
+ AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
+ AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
+ AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
+ AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
>;
};
vpfe1_pins_default: vpfe1_pins_default {
pinctrl-single,pins = <
- 0x1CC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
- 0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
- 0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
- 0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
- 0x1DC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
- 0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
- 0x1EC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
- 0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
- 0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
- 0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
- 0x1FC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
- 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
- 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
+ AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
+ AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
+ AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
+ AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
+ AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
+ AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
+ AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
+ AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
+ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
+ AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
+ AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
+ AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
+ AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
>;
};
vpfe1_pins_sleep: vpfe1_pins_sleep {
pinctrl-single,pins = <
- 0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
- 0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
- 0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
- 0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
- 0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
- 0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
- 0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
- 0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
- 0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
- 0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
- 0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
- 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
- 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
+ AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
+ AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
+ AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
+ AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
+ AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
+ AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
+ AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
+ AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
+ AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
+ AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
+ AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
+ AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
+ AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
>;
};
mmc3_pins_default: pinmux_mmc3_pins_default {
pinctrl-single,pins = <
- 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
- 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
- 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
- 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
- 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
- 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */
+ AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
+ AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
+ AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
+ AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
+ AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */
>;
};
mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
pinctrl-single,pins = <
- 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */
- 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */
- 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */
- 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */
- 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */
+ AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */
+ AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */
+ AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */
+ AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */
+ AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */
>;
};
wlan_pins_default: pinmux_wlan_pins_default {
pinctrl-single,pins = <
- 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
- 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
+ AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
+ AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
+ AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
>;
};
wlan_pins_sleep: pinmux_wlan_pins_sleep {
pinctrl-single,pins = <
- 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
- 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
- 0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
+ AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
+ AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
+ AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
>;
};
uart3_pins: uart3_pins {
pinctrl-single,pins = <
- 0x228 (PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */
- 0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
- 0x230 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */
- 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+ AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */
+ AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
+ AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */
+ AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
- 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
mcasp1_sleep_pins: mcasp1_sleep_pins {
pinctrl-single,pins = <
- 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
gpio0_pins: gpio0_pins {
pinctrl-single,pins = <
- 0x26c (PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
+ AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
>;
};
emmc_pins_default: emmc_pins_default {
pinctrl-single,pins = <
- 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
- 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
>;
};
emmc_pins_sleep: emmc_pins_sleep {
pinctrl-single,pins = <
- 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
- 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
- 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
- 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
- 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
- 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
- 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
- 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
- 0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
- 0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
+ AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
+ AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
+ AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
+ AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
+ AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+ AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+ AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+ AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+ AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
+ AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
>;
};
};
@@ -734,8 +734,8 @@
status = "okay";
/* these are on the crossbar and are outlined in the
xbar-event-map element */
- dmas = <&edma 30
- &edma 31>;
+ dmas = <&edma_xbar 30 0 1>,
+ <&edma_xbar 31 0 2>;
dma-names = "tx", "rx";
vmmc-supply = <&vmmcwl_fixed>;
bus-width = <4>;
@@ -756,11 +756,6 @@
};
};
-&edma {
- ti,edma-xbar-event-map = /bits/ 16 <1 30
- 2 31>;
-};
-
&uart3 {
status = "okay";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 337fb91..76dcfc6 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -122,137 +122,137 @@
&am43xx_pinmux {
gpio_keys_pins_default: gpio_keys_pins_default {
pinctrl-single,pins = <
- 0x1b8 (PIN_INPUT | MUX_MODE7) /* cam0_field.gpio4_2 */
+ AM4372_IOPAD(0x9b8, PIN_INPUT | MUX_MODE7) /* cam0_field.gpio4_2 */
>;
};
i2c0_pins_default: i2c0_pins_default {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c0_pins_sleep: i2c0_pins_sleep {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x18c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
i2c2_pins_default: i2c2_pins_default {
pinctrl-single,pins = <
- 0x1e8 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
- 0x1ec (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
+ AM4372_IOPAD(0x9e8, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
+ AM4372_IOPAD(0x9ec, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
>;
};
i2c2_pins_sleep: i2c2_pins_sleep {
pinctrl-single,pins = <
- 0x1e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1ec (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc1_pins_default: pinmux_mmc1_pins_default {
pinctrl-single,pins = <
- 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- 0x1f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- 0x1f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- 0x1f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- 0x1fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM4372_IOPAD(0x9f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM4372_IOPAD(0x9f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM4372_IOPAD(0x9f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM4372_IOPAD(0x9fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
pinctrl-single,pins = <
- 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1f0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1f4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1f8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1fc (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x900, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x904, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x960, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
ecap0_pins_default: backlight_pins_default {
pinctrl-single,pins = <
- 0x164 (PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
+ AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
- 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
+ AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
+ AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
qspi_pins_default: qspi_pins_default {
pinctrl-single,pins = <
- 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */
- 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
- 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
- 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
- 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */
- 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
+ AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */
+ AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
+ AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
+ AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
+ AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */
+ AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
>;
};
qspi_pins_sleep: qspi_pins_sleep{
pinctrl-single,pins = <
- 0x7c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x87c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x898, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
};
diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts
new file mode 100644
index 0000000..5f750c0
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-sbc-t43.dts
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am437x-cm-t43.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+ model = "CompuLab CM-T43 on SB-SOM-T43";
+ compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+ aliases {
+ display0 = &lcd0;
+ };
+};
+
+&am43xx_pinmux {
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM4372_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM4372_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM4372_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM4372_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM4372_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM4372_IOPAD(0x964, PIN_INPUT | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */
+ >;
+ };
+
+ dss_pinctrl_default: dss_pinctrl_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam0 hd -> DSS DATA 23 */
+ AM4372_IOPAD(0x9b4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9b8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9bc, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9c0, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9c4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9c8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam1 data 9 -> DSS DATA 16 */
+
+ AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+ AM4372_IOPAD(0xa20, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ uart0_pins_default: uart0_pins_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+ AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ i2c1_pins: i2c1_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa6c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_cs0.i2c1_sda */
+ AM4372_IOPAD(0xa60, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_sclk.i2c1_scl */
+ >;
+ };
+
+ i2c2_pins: i2c2_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ >;
+ };
+
+ usb2_phy1_default: usb2_phy1_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ usb2_phy2_default: usb2_phy2_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom_base: at24@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+};
+
+&mmc1 {
+ status = "okay";
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vsb_3v3>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_pinctrl_default>;
+
+ port {
+ dpi_lcd_out: endpoint@0 {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_default>;
+};
+
+&dwc3_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_phy1_default>;
+};
+
+&dwc3_2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_phy2_default>;
+};
+
+&lcd0 {
+ enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+ &gpio4 28 GPIO_ACTIVE_HIGH>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_lcd_out>;
+ data-lines = <24>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 63de2a1..d82dd6e 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -157,259 +157,259 @@
&am43xx_pinmux {
matrix_keypad_pins: matrix_keypad_pins {
pinctrl-single,pins = <
- 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */
- 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */
- 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */
- 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */
+ AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */
+ AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */
+ AM4372_IOPAD(0xa54, PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */
+ AM4372_IOPAD(0xa58, PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */
>;
};
leds_pins: leds_pins {
pinctrl-single,pins = <
- 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */
- 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */
- 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */
- 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */
+ AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */
+ AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */
+ AM4372_IOPAD(0xa30, PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */
+ AM4372_IOPAD(0xa34, PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */
>;
};
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: i2c1_pins {
pinctrl-single,pins = <
- 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
- 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- 0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- 0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- 0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM4372_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM4372_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
- 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+ AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
>;
};
edt_ft5306_ts_pins: edt_ft5306_ts_pins {
pinctrl-single,pins = <
- 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
- 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */
+ AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */
>;
};
vpfe0_pins_default: vpfe0_pins_default {
pinctrl-single,pins = <
- 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
- 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
- 0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/
- 0x1bc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/
- 0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
- 0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
- 0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
- 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
- 0x20c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
- 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
- 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
- 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
- 0x21c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
- 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
- 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ AM4372_IOPAD(0x9b8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/
+ AM4372_IOPAD(0x9bc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/
+ AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
>;
};
vpfe0_pins_sleep: vpfe0_pins_sleep {
pinctrl-single,pins = <
- 0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9b8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9bc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x12c (PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
- 0x114 (PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- 0x128 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- 0x124 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- 0x120 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
- 0x11c (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
- 0x130 (PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
- 0x118 (PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- 0x140 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
- 0x13c (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
- 0x138 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
- 0x134 (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
+ AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
+ AM4372_IOPAD(0x914, PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM4372_IOPAD(0x928, PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM4372_IOPAD(0x924, PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM4372_IOPAD(0x920, PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
+ AM4372_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
+ AM4372_IOPAD(0x930, PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ AM4372_IOPAD(0x918, PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM4372_IOPAD(0x940, PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ AM4372_IOPAD(0x93c, PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM4372_IOPAD(0x938, PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
+ AM4372_IOPAD(0x934, PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
/* Slave 2 */
- 0x58 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
- 0x40 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
- 0x54 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
- 0x50 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
- 0x4c (PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
- 0x48 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
- 0x5c (PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
- 0x44 (PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
- 0x6c (PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
- 0x68 (PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
- 0x64 (PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
- 0x60 (PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ AM4372_IOPAD(0x858, PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
+ AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* Slave 2 reset value */
- 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
dss_pins: dss_pins {
pinctrl-single,pins = <
- 0x020 (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
- 0x024 (PIN_OUTPUT | MUX_MODE1)
- 0x028 (PIN_OUTPUT | MUX_MODE1)
- 0x02c (PIN_OUTPUT | MUX_MODE1)
- 0x030 (PIN_OUTPUT | MUX_MODE1)
- 0x034 (PIN_OUTPUT | MUX_MODE1)
- 0x038 (PIN_OUTPUT | MUX_MODE1)
- 0x03c (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
- 0x0a0 (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */
- 0x0a4 (PIN_OUTPUT | MUX_MODE0)
- 0x0a8 (PIN_OUTPUT | MUX_MODE0)
- 0x0ac (PIN_OUTPUT | MUX_MODE0)
- 0x0b0 (PIN_OUTPUT | MUX_MODE0)
- 0x0b4 (PIN_OUTPUT | MUX_MODE0)
- 0x0b8 (PIN_OUTPUT | MUX_MODE0)
- 0x0bc (PIN_OUTPUT | MUX_MODE0)
- 0x0c0 (PIN_OUTPUT | MUX_MODE0)
- 0x0c4 (PIN_OUTPUT | MUX_MODE0)
- 0x0c8 (PIN_OUTPUT | MUX_MODE0)
- 0x0cc (PIN_OUTPUT | MUX_MODE0)
- 0x0d0 (PIN_OUTPUT | MUX_MODE0)
- 0x0d4 (PIN_OUTPUT | MUX_MODE0)
- 0x0d8 (PIN_OUTPUT | MUX_MODE0)
- 0x0dc (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */
- 0x0e0 (PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */
- 0x0e4 (PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */
- 0x0e8 (PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */
- 0x0ec (PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */
+ AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
+ AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
+ AM4372_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */
+ AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */
+ AM4372_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */
+ AM4372_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */
+ AM4372_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */
+ AM4372_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */
>;
};
qspi_pins: qspi_pins {
pinctrl-single,pins = <
- 0x7c (PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */
- 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
- 0x90 (PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
- 0x94 (PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
- 0x98 (PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */
- 0x9c (PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
+ AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */
+ AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
+ AM4372_IOPAD(0x890, PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
+ AM4372_IOPAD(0x894, PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
+ AM4372_IOPAD(0x898, PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */
+ AM4372_IOPAD(0x89c, PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
- 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
mcasp1_pins_sleep: mcasp1_pins_sleep {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
lcd_pins: lcd_pins {
pinctrl-single,pins = <
- 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
+ AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
>;
};
usb1_pins: usb1_pins {
pinctrl-single,pins = <
- 0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+ AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
>;
};
usb2_pins: usb2_pins {
pinctrl-single,pins = <
- 0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+ AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
>;
};
};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 47954ed..746fd2b 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -144,228 +144,228 @@
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxdv.rmii1_rxdv */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxdv.rmii1_rxdv */
+ AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
nand_flash_x8: nand_flash_x8 {
pinctrl-single,pins = <
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */
- 0x0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */
+ AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
+ AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
- 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */
- 0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */
+ AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */
+ AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */
>;
};
spi0_pins: pinmux_spi0_pins {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */
- 0x154 (PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
- 0x158 (PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
- 0x15c (PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */
+ AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
>;
};
spi1_pins: pinmux_spi1_pins {
pinctrl-single,pins = <
- 0x190 (PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */
- 0x194 (PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
- 0x198 (PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
- 0x19c (PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
+ AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */
+ AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
+ AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
+ AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
qspi1_default: qspi1_default {
pinctrl-single,pins = <
- 0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
- 0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
- 0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
- 0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
- 0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
- 0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)
>;
};
pixcir_ts_pins: pixcir_ts_pins {
pinctrl-single,pins = <
- 0x44 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */
>;
};
hdq_pins: pinmux_hdq_pins {
pinctrl-single,pins = <
- 0x234 (PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */
+ AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */
>;
};
dss_pins: dss_pins {
pinctrl-single,pins = <
- 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
- 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
- 0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
- 0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
- 0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
- 0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
- 0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
- 0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+ AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+ AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+ AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
>;
};
display_mux_pins: display_mux_pins {
pinctrl-single,pins = <
/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
- 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
vpfe1_pins_default: vpfe1_pins_default {
pinctrl-single,pins = <
- 0x1cc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */
- 0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */
- 0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */
- 0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */
- 0x1dc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */
- 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */
- 0x1ec (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */
- 0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */
- 0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */
- 0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */
- 0x1fc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */
- 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */
- 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */
+ AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */
+ AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */
+ AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */
+ AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */
+ AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */
+ AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */
+ AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */
+ AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */
+ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */
+ AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */
+ AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */
+ AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */
+ AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */
>;
};
vpfe1_pins_sleep: vpfe1_pins_sleep {
pinctrl-single,pins = <
- 0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
- 0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
- 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
- 0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
- 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
+ AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
+ AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
+ AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
+ AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
>;
};
mcasp1_sleep_pins: mcasp1_sleep_pins {
pinctrl-single,pins = <
- 0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 00352e7..36c0fa6 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -181,97 +181,97 @@
&dra7_pmx_core {
leds_pins_default: leds_pins_default {
pinctrl-single,pins = <
- 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
- 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
- 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
- 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
+ DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
+ DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
+ DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
+ DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
>;
};
i2c1_pins_default: i2c1_pins_default {
pinctrl-single,pins = <
- 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
- 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
+ DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
+ DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
>;
};
hdmi_pins: pinmux_hdmi_pins {
pinctrl-single,pins = <
- 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
- 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
+ DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
+ DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
>;
};
i2c3_pins_default: i2c3_pins_default {
pinctrl-single,pins = <
- 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
- 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
+ DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
+ DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
>;
};
uart3_pins_default: uart3_pins_default {
pinctrl-single,pins = <
- 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
- 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
>;
};
mmc1_pins_default: mmc1_pins_default {
pinctrl-single,pins = <
- 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
- 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
- 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
- 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
- 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
- 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
- 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
>;
};
mmc2_pins_default: mmc2_pins_default {
pinctrl-single,pins = <
- 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
- 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
- 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
- 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
- 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
- 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
- 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
- 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
- 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
- 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>;
};
cpsw_pins_default: cpsw_pins_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
- 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
- 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
- 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
- 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
- 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
- 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
- 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
- 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
- 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
- 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
- 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
+ DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
+ DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
+ DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
+ DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
+ DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
+ DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
/* Slave 2 */
- 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
- 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
- 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
- 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
- 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
- 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
- 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
- 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
- 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
- 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
- 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
- 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
+ DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
>;
};
@@ -279,115 +279,115 @@
cpsw_pins_sleep: cpsw_pins_sleep {
pinctrl-single,pins = <
/* Slave 1 */
- 0x250 (PIN_INPUT | MUX_MODE15)
- 0x254 (PIN_INPUT | MUX_MODE15)
- 0x258 (PIN_INPUT | MUX_MODE15)
- 0x25c (PIN_INPUT | MUX_MODE15)
- 0x260 (PIN_INPUT | MUX_MODE15)
- 0x264 (PIN_INPUT | MUX_MODE15)
- 0x268 (PIN_INPUT | MUX_MODE15)
- 0x26c (PIN_INPUT | MUX_MODE15)
- 0x270 (PIN_INPUT | MUX_MODE15)
- 0x274 (PIN_INPUT | MUX_MODE15)
- 0x278 (PIN_INPUT | MUX_MODE15)
- 0x27c (PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
/* Slave 2 */
- 0x198 (PIN_INPUT | MUX_MODE15)
- 0x19c (PIN_INPUT | MUX_MODE15)
- 0x1a0 (PIN_INPUT | MUX_MODE15)
- 0x1a4 (PIN_INPUT | MUX_MODE15)
- 0x1a8 (PIN_INPUT | MUX_MODE15)
- 0x1ac (PIN_INPUT | MUX_MODE15)
- 0x1b0 (PIN_INPUT | MUX_MODE15)
- 0x1b4 (PIN_INPUT | MUX_MODE15)
- 0x1b8 (PIN_INPUT | MUX_MODE15)
- 0x1bc (PIN_INPUT | MUX_MODE15)
- 0x1c0 (PIN_INPUT | MUX_MODE15)
- 0x1c4 (PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
>;
};
davinci_mdio_pins_default: davinci_mdio_pins_default {
pinctrl-single,pins = <
/* MDIO */
- 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
- 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
+ DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
+ DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
>;
};
davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
pinctrl-single,pins = <
- 0x23c (PIN_INPUT | MUX_MODE15)
- 0x240 (PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
>;
};
tps659038_pins_default: tps659038_pins_default {
pinctrl-single,pins = <
- 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
+ DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
>;
};
tmp102_pins_default: tmp102_pins_default {
pinctrl-single,pins = <
- 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
+ DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
>;
};
mcp79410_pins_default: mcp79410_pins_default {
pinctrl-single,pins = <
- 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
+ DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
>;
};
usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
- 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
>;
};
extcon_usb1_pins: extcon_usb1_pins {
pinctrl-single,pins = <
- 0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
- 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
- 0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
+ DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
+ DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
+ DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
>;
};
clkout2_pins_default: clkout2_pins_default {
pinctrl-single,pins = <
- 0x294 (PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
+ DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
>;
};
clkout2_pins_sleep: clkout2_pins_sleep {
pinctrl-single,pins = <
- 0x294 (PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */
+ DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */
>;
};
mcasp3_pins_default: mcasp3_pins_default {
pinctrl-single,pins = <
- 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
- 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
- 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
- 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+ DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
>;
};
mcasp3_pins_sleep: mcasp3_pins_sleep {
pinctrl-single,pins = <
- 0x324 (PIN_INPUT | MUX_MODE15)
- 0x328 (PIN_INPUT | MUX_MODE15)
- 0x32c (PIN_INPUT | MUX_MODE15)
- 0x330 (PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
>;
};
};
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
new file mode 100644
index 0000000..c538826
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -0,0 +1,617 @@
+/*
+ * Support for CompuLab CL-SOM-AM57x System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dra74x.dtsi"
+
+/ {
+ model = "CompuLab CL-SOM-AM57x";
+ compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB - minimal configuration */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins_default>;
+
+ led@0 {
+ label = "cl-som-am57x:green";
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
+ vdd_3v3: fixedregulator-vdd_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ads7846reg: fixedregulator-ads7846-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "ads7846-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ sound0: sound@0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Microphone", "Microphone Jack",
+ "Line", "Line Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "RHPOUT",
+ "Headphone Jack", "LHPOUT",
+ "LLINEIN", "Line Jack",
+ "MICIN", "Mic Bias",
+ "Mic Bias", "Microphone Jack";
+
+ dailink0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm8731>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+};
+
+&dra7_pmx_core {
+ leds_pins_default: leds_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14) /* gpmc_a15.gpio2_5 */
+ >;
+ };
+
+ i2c1_pins_default: i2c1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
+ DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
+ >;
+ };
+
+ i2c3_pins_default: i2c3_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
+ DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
+ >;
+ };
+
+ i2c4_pins_default: i2c4_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10) /* mcasp1_acl.i2c4_sda */
+ DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10) /* mcasp1_fsr.i2c4_scl */
+ >;
+ };
+
+ tps659038_pins_default: tps659038_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ qspi1_pins: pinmux_qspi1_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
+ DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d0 */
+ DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d1 */
+ DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
+ DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
+ DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
+ >;
+ };
+
+ cpsw_pins_default: cpsw_pins_default {
+ pinctrl-single,pins = <
+ /* Slave at addr 0x0 */
+ DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tclk */
+ DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tctl */
+ DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3 */
+ DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td2 */
+ DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td1 */
+ DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td0 */
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */
+
+ /* Slave at addr 0x1 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_tclk */
+ DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+ >;
+ };
+
+ cpsw_pins_sleep: cpsw_pins_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
+
+ /* Slave 2 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
+ >;
+ };
+
+ davinci_mdio_pins_default: davinci_mdio_pins_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */
+ DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d11.mdio_d */
+ >;
+ };
+
+ davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15)
+ >;
+ };
+
+ ads7846_pins: pinmux_ads7846_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */
+ >;
+ };
+
+ mcasp3_pins_default: mcasp3_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+ DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+ >;
+ };
+
+ mcasp3_pins_sleep: mcasp3_pins_sleep {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_default>;
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_default>;
+ clock-frequency = <400000>;
+};
+
+&i2c4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_default>;
+ clock-frequency = <400000>;
+
+ tps659038: tps659038@58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps659038_pins_default>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ regulators {
+ smps12_reg: smps12 {
+ /* VDD_MPU */
+ regulator-name = "smps12";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_DDR */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_GPU */
+ regulator-name = "smps6";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ /* VDD_CORE */
+ regulator-name = "smps7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ /* VDD_IVA */
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ /* PMIC_3V3 */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+
+ ldo1_reg: ldo1 {
+ /* VDD_SD / VDDSHV8 */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_1V8 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ /* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* regen1 not used */
+ };
+ };
+
+ tps659038_pwr_button: tps659038_pwr_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps659038>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <12>;
+ };
+
+ tps659038_gpio: tps659038_gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ rtc0: rtc@56 {
+ compatible = "emmicro,em3027";
+ reg = <0x56>;
+ };
+
+ eeprom_module: atmel@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ wm8731: wm8731@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8731";
+ reg = <0x1a>;
+ status = "okay";
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&smps12_reg>;
+ voltage-tolerance = <1>;
+};
+
+&sata {
+ status = "okay";
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ status = "okay";
+ };
+};
+
+&mmc2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+
+ vmmc-supply = <&vdd_3v3>;
+ bus-width = <8>;
+ ti,non-removable;
+ cap-mmc-dual-data-rate;
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi1_pins>;
+
+ spi-max-frequency = <20000000>;
+
+ spi_flash: spi_flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80", "jedec,spi-nor";
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <20000000>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0xc0000>;
+ };
+
+ partition@c0000 {
+ label = "uboot environment";
+ reg = <0xc0000 0x40000>;
+ };
+
+ partition@100000 {
+ label = "reserved";
+ reg = <0x100000 0x0>;
+ };
+ };
+
+ /* touch controller */
+ ads7846@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ads7846_pins>;
+
+ compatible = "ti,ads7846";
+ vcc-supply = <&ads7846reg>;
+
+ reg = <1>; /* CS1 */
+ spi-max-frequency = <1500000>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <31 0>;
+ pendown-gpio = <&gpio1 31 0>;
+
+
+ ti,x-min = /bits/ 16 <0x0>;
+ ti,x-max = /bits/ 16 <0x0fff>;
+ ti,y-min = /bits/ 16 <0x0>;
+ ti,y-max = /bits/ 16 <0x0fff>;
+
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ ti,pressure-max = /bits/ 16 <255>;
+
+ ti,debounce-max = /bits/ 16 <30>;
+ ti,debounce-tol = /bits/ 16 <10>;
+ ti,debounce-rep = /bits/ 16 <1>;
+
+ linux,wakeup;
+ };
+};
+
+&mac {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_pins_default>;
+ pinctrl-1 = <&cpsw_pins_sleep>;
+ dual_emac;
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <0>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_pins_default>;
+ pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&usb2 {
+ dr_mode = "peripheral";
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp3_pins_default>;
+ pinctrl-1 = <&mcasp3_pins_sleep>;
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+};
+
+&gpio3 {
+ status = "okay";
+ ti,no-reset-on-init;
+};
+
+&gpio2 {
+ status = "okay";
+ ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
new file mode 100644
index 0000000..77bb8e1
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
@@ -0,0 +1,179 @@
+/*
+ * Support for CompuLab SBC-AM57x single board computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include "am57xx-cl-som-am57x.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+ model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x";
+ compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi;
+ };
+};
+
+&dra7_pmx_core {
+ uart3_pins_default: uart3_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
+ >;
+ };
+
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1_sdcd.gpio6_27 */
+ DRA7XX_CORE_IOPAD(0x377c, PIN_INPUT | MUX_MODE14) /* mmc1_sdwp.gpio6_28 */
+ >;
+ };
+
+ usb1_pins: pinmux_usb1_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ >;
+ };
+
+ i2c5_pins_default: i2c5_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+ DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+ >;
+ };
+
+ lcd_pins_default: lcd_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14) /* vin2a_vsync0.gpio4_0 */
+ >;
+ };
+
+ hdmi_pins: pinmux_hdmi_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
+ DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
+ >;
+ };
+
+ hdmi_conn_pins: pinmux_hdmi_conn_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14) /* spi1_cs2.gpio7_12 */
+ >;
+ };
+};
+
+&uart3 {
+ status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3f8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_default>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+
+ vmmc-supply = <&ldo1_reg>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+};
+
+&i2c5 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins_default>;
+ clock-frequency = <400000>;
+
+ eeprom_base: atmel@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&dss {
+ status = "ok";
+
+ vdda_video-supply = <&ldoln_reg>;
+
+ port {
+ dpi_lcd_out: endpoint@0 {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&lcd0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins_default>;
+
+ enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+ &gpio4 0 GPIO_ACTIVE_HIGH>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_lcd_out>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&hdmi {
+ status = "ok";
+ vdda-supply = <&ldo4_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ lanes = <1 0 3 2 5 4 7 6>;
+ };
+ };
+};
+
+&hdmi_conn {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_conn_pins>;
+
+ hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
new file mode 100644
index 0000000..896bd21
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -0,0 +1,668 @@
+/*
+ * Copyright 2015 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+ model = "ARM RealView PB11MPcore";
+ compatible = "arm,realview-pb11mp";
+
+ chosen { };
+
+ aliases {
+ serial0 = &pb11mp_serial0;
+ serial1 = &pb11mp_serial1;
+ serial2 = &pb11mp_serial2;
+ serial3 = &pb11mp_serial3;
+ };
+
+ memory {
+ /*
+ * The PB11MPCore has 512 MiB memory @ 0x70000000
+ * and the first 256 are also remapped @ 0x00000000
+ */
+ reg = <0x70000000 0x20000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "arm,realview-smp";
+
+ MP11_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ MP11_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ MP11_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ MP11_3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ /* Primary TestChip GIC synthesized with the CPU */
+ intc_tc11mp: interrupt-controller@1f000100 {
+ compatible = "arm,tc11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x1f001000 0x1000>,
+ <0x1f000100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,l220-cache";
+ reg = <0x1f002000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ scu@1f000000 {
+ compatible = "arm,arm11mp-scu";
+ reg = <0x1f000000 0x100>;
+ };
+
+ timer@1f000600 {
+ compatible = "arm,arm11mp-twd-timer";
+ reg = <0x1f000600 0x20>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <1 13 0xf04>;
+ };
+
+ watchdog@1f000620 {
+ compatible = "arm,arm11mp-twd-wdt";
+ reg = <0x1f000620 0x20>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <1 14 0xf04>;
+ };
+
+ /* PMU with one IRQ line per core */
+ pmu {
+ compatible = "arm,arm11mpcore-pmu";
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+ };
+
+ /* The voltage to the MMC card is hardwired at 3.3V */
+ vmmc: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ veth: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "veth";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ timclk: timclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ mclk: mclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ kmiclk: kmiclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ sspclk: sspclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ uartclk: uartclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ wdogclk: wdogclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* FIXME: this actually hangs off the PLL clocks */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ flash0@40000000 {
+ /* 2 * 32MiB NOR Flash memory */
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0x40000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ flash1@44000000 {
+ // 2 * 32MiB NOR Flash memory
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0x44000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,realview-pb11mp-soc", "simple-bus";
+ regmap = <&pb11mp_syscon>;
+ ranges;
+
+ pb11mp_syscon: syscon@10000000 {
+ compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
+ reg = <0x10000000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "versatile:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@08.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "versatile:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@08.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "versatile:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@08.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "versatile:3";
+ linux,default-trigger = "cpu1";
+ default-state = "off";
+ };
+ led@08.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "versatile:4";
+ linux,default-trigger = "cpu2";
+ default-state = "off";
+ };
+ led@08.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "versatile:5";
+ linux,default-trigger = "cpu3";
+ default-state = "off";
+ };
+ led@08.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "versatile:6";
+ default-state = "off";
+ };
+ led@08.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "versatile:7";
+ default-state = "off";
+ };
+
+ oscclk0: osc0@0c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x0C>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk1: osc1@10 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x10>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk2: osc2@14 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x14>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk3: osc3@18 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x18>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk4: osc4@1c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x1c>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk5: osc5@d4 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0xd4>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk6: osc6@d8 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0xd8>;
+ clocks = <&xtal24mhz>;
+ };
+ };
+
+ sp810_syscon: sysctl@10001000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x10001000 0x1000>;
+ clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclk0",
+ "timerclk1",
+ "timerclk2",
+ "timerclk3";
+ assigned-clocks = <&sp810_syscon 0>,
+ <&sp810_syscon 1>,
+ <&sp810_syscon 2>,
+ <&sp810_syscon 3>;
+ assigned-clock-parents = <&timclk>,
+ <&timclk>,
+ <&timclk>,
+ <&timclk>;
+ };
+
+ i2c0: i2c@10002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,versatile-i2c";
+ reg = <0x10002000 0x1000>;
+
+ rtc@68 {
+ compatible = "dallas,ds1338";
+ reg = <0x68>;
+ };
+ };
+
+ aaci: aaci@10004000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x10004000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ mci: mmcsd@10005000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x10005000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>;
+ /* Due to frequent FIFO overruns, use just 500 kHz */
+ max-frequency = <500000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ clocks = <&mclk>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
+ vmmc-supply = <&vmmc>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ kmi0: kmi@10006000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10006000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi1: kmi@10007000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10007000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ pb11mp_serial0: serial@10009000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x10009000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb11mp_serial1: serial@1000a000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000a000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb11mp_serial2: serial@1000b000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000b000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb11mp_serial3: serial@1000c000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000c000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ ssp@1000d000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x1000d000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sspclk>, <&pclk>;
+ clock-names = "SSPCLK", "apb_pclk";
+ };
+
+ watchdog@1000f000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x1000f000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&wdogclk>, <&pclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ watchdog@10010000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x10010000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&wdogclk>, <&pclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ timer01: timer@10011000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10011000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+ arm,sp804-has-irq = <1>;
+ clocks = <&sp810_syscon 0>,
+ <&sp810_syscon 1>,
+ <&pclk>;
+ clock-names = "timerclk0",
+ "timerclk1",
+ "apb_pclk";
+ };
+
+ timer23: timer@10012000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10012000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+ arm,sp804-has-irq = <1>;
+ clocks = <&sp810_syscon 2>,
+ <&sp810_syscon 3>,
+ <&pclk>;
+ clock-names = "timerclk2",
+ "timerclk3",
+ "apb_pclk";
+ };
+
+ gpio0: gpio@10013000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10013000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio1: gpio@10014000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10014000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio@10015000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10015000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ rtc: rtc@10017000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x10017000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ timer45: timer@10018000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10018000 0x1000>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timer", "apb_pclk";
+ status = "disabled";
+ };
+
+ timer67: timer@10019000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10019000 0x1000>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timer", "apb_pclk";
+ status = "disabled";
+ };
+
+
+ clcd@10020000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x10020000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupt-names = "combined";
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&oscclk4>, <&pclk>;
+ clock-names = "clcdclk", "apb_pclk";
+ max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+
+ port {
+ clcd_pads: endpoint {
+ remote-endpoint = <&clcd_panel>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+
+ panel {
+ compatible = "panel-dpi";
+
+ port {
+ clcd_panel: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <63500127>;
+ hactive = <1024>;
+ hback-porch = <152>;
+ hfront-porch = <48>;
+ hsync-len = <104>;
+ vactive = <768>;
+ vback-porch = <23>;
+ vfront-porch = <3>;
+ vsync-len = <4>;
+ };
+ };
+ };
+
+ /*
+ * This GIC on the Platform Baseboard is cascaded off the
+ * TestChip GIC
+ */
+ intc_pb11mp: interrupt-controller@1e000000 {
+ compatible = "arm,arm11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x1e001000 0x1000>,
+ <0x1e000000 0x100>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* SMSC 9118 ethernet with PHY and EEPROM */
+ ethernet@4e000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <0x4e000000 0x10000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&veth>;
+ vddvario-supply = <&veth>;
+ };
+
+ usb@4f000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <0x4f000000 0x20000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+ port1-otg;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 5555875..39181b3 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -127,7 +127,7 @@
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
- isil,irq2-can-wakeup-machine;
+ wakeup-source;
};
g762: g762@3e {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 78b563c..faa4748 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -133,7 +133,7 @@
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
- isil,irq2-can-wakeup-machine;
+ wakeup-source;
};
g762: g762@3e {
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
new file mode 100644
index 0000000..c6e180e
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -0,0 +1,456 @@
+/*
+ * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828)
+ *
+ * Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board. Things will change, don't expect this file to
+ * remain compatible info the future.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+ model = "SolidRun Clearfog A1";
+ compatible = "solidrun,clearfog-a1", "marvell,armada388",
+ "marvell,armada385", "marvell,armada380";
+
+ aliases {
+ /* So that mvebu u-boot can update the MAC addresses */
+ ethernet1 = ð0;
+ ethernet2 = ð1;
+ ethernet3 = ð2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ soc {
+ internal-regs {
+ ethernet@30000 {
+ phy-mode = "sgmii";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ ethernet@34000 {
+ phy-mode = "sgmii";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ i2c@11000 {
+ /* Is there anything on this? */
+ clock-frequency = <100000>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /*
+ * PCA9655 GPIO expander, up to 1MHz clock.
+ * 0-CON3 CLKREQ#
+ * 1-CON3 PERST#
+ * 2-CON2 PERST#
+ * 3-CON3 W_DISABLE
+ * 4-CON2 CLKREQ#
+ * 5-USB3 overcurrent
+ * 6-USB3 power
+ * 7-CON2 W_DISABLE
+ * 8-JP4 P1
+ * 9-JP4 P4
+ * 10-JP4 P5
+ * 11-m.2 DEVSLP
+ * 12-SFP_LOS
+ * 13-SFP_TX_FAULT
+ * 14-SFP_TX_DISABLE
+ * 15-SFP_MOD_DEF0
+ */
+ expander0: gpio-expander@20 {
+ /*
+ * This is how it should be:
+ * compatible = "onnn,pca9655",
+ * "nxp,pca9555";
+ * but you can't do this because of
+ * the way I2C works.
+ */
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+
+ pcie1_0_clkreq {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "pcie1.0-clkreq";
+ };
+ pcie1_0_w_disable {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "pcie1.0-w-disable";
+ };
+ pcie2_0_clkreq {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "pcie2.0-clkreq";
+ };
+ pcie2_0_w_disable {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "pcie2.0-w-disable";
+ };
+ usb3_ilimit {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "usb3-current-limit";
+ };
+ usb3_power {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb3-power";
+ };
+ m2_devslp {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "m.2 devslp";
+ };
+ sfp_los {
+ /* SFP loss of signal */
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "sfp-los";
+ };
+ sfp_tx_fault {
+ /* SFP laser fault */
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "sfp-tx-fault";
+ };
+ sfp_tx_disable {
+ /* SFP transmit disable */
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "sfp-tx-disable";
+ };
+ sfp_mod_def0 {
+ /* SFP module present */
+ gpio-hog;
+ gpios = <15 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "sfp-mod-def0";
+ };
+ };
+
+ /* The MCP3021 is 100kHz clock only */
+ mikrobus_adc: mcp3021@4c {
+ compatible = "microchip,mcp3021";
+ reg = <0x4c>;
+ };
+
+ /* Also something at 0x64 */
+ };
+
+ i2c@11100 {
+ /*
+ * Routed to SFP, mikrobus, and PCIe.
+ * SFP limits this to 100kHz, and requires
+ * an AT24C01A/02/04 with address pins tied
+ * low, which takes addresses 0x50 and 0x51.
+ * Mikrobus doesn't specify beyond an I2C
+ * bus being present.
+ * PCIe uses ARP to assign addresses, or
+ * 0x63-0x64.
+ */
+ clock-frequency = <100000>;
+ pinctrl-0 = <&clearfog_i2c1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ mdio@72004 {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ phy_dedicated: ethernet-phy@0 {
+ /*
+ * Annoyingly, the marvell phy driver
+ * configures the LED register, rather
+ * than preserving reset-loaded setting.
+ * We undo that rubbish here.
+ */
+ marvell,reg-init = <3 16 0 0x101e>;
+ reg = <0>;
+ };
+ };
+
+ pinctrl@18000 {
+ clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
+ marvell,pins = "mpp46";
+ marvell,function = "ref";
+ };
+ clearfog_dsa0_pins: clearfog-dsa0-pins {
+ marvell,pins = "mpp23", "mpp41";
+ marvell,function = "gpio";
+ };
+ clearfog_i2c1_pins: i2c1-pins {
+ /* SFP, PCIe, mSATA, mikrobus */
+ marvell,pins = "mpp26", "mpp27";
+ marvell,function = "i2c1";
+ };
+ clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+ clearfog_sdhci_pins: clearfog-sdhci-pins {
+ marvell,pins = "mpp21", "mpp28",
+ "mpp37", "mpp38",
+ "mpp39", "mpp40";
+ marvell,function = "sd0";
+ };
+ clearfog_spi1_cs_pins: spi1-cs-pins {
+ marvell,pins = "mpp55";
+ marvell,function = "spi1";
+ };
+ mikro_pins: mikro-pins {
+ /* int: mpp22 rst: mpp29 */
+ marvell,pins = "mpp22", "mpp29";
+ marvell,function = "gpio";
+ };
+ mikro_spi_pins: mikro-spi-pins {
+ marvell,pins = "mpp43";
+ marvell,function = "spi1";
+ };
+ mikro_uart_pins: mikro-uart-pins {
+ marvell,pins = "mpp24", "mpp25";
+ marvell,function = "ua1";
+ };
+ rear_button_pins: rear-button-pins {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ };
+
+ sata@a8000 {
+ /* pinctrl? */
+ status = "okay";
+ };
+
+ sata@e0000 {
+ /* pinctrl? */
+ status = "okay";
+ };
+
+ sdhci@d8000 {
+ bus-width = <4>;
+ cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ pinctrl-0 = <&clearfog_sdhci_pins
+ &clearfog_sdhci_cd_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ vmmc = <®_3p3v>;
+ wp-inverted;
+ };
+
+ serial@12100 {
+ /* mikrobus uart */
+ pinctrl-0 = <&mikro_uart_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ spi@10680 {
+ /*
+ * We don't seem to have the W25Q32 on the
+ * A1 Rev 2.0 boards, so disable SPI.
+ * CS0: W25Q32 (doesn't appear to be present)
+ * CS1:
+ * CS2: mikrobus
+ */
+ pinctrl-0 = <&spi1_pins
+ &clearfog_spi1_cs_pins
+ &mikro_spi_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "w25q32", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <3000000>;
+ status = "disabled";
+ };
+ };
+
+ usb@58000 {
+ /* CON3, nearest power. */
+ status = "okay";
+ };
+
+ usb3@f0000 {
+ /* CON2, nearest CPU, USB2 only. */
+ status = "okay";
+ };
+
+ usb3@f8000 {
+ /* CON7 */
+ status = "okay";
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+ /*
+ * The two PCIe units are accessible through
+ * the mini-PCIe connectors on the board.
+ */
+ pcie@2,0 {
+ /* Port 1, Lane 0. CON3, nearest power. */
+ reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+ pcie@3,0 {
+ /* Port 2, Lane 0. CON2, nearest CPU. */
+ reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+ };
+ };
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ dsa,ethernet = <ð1>;
+ dsa,mii-bus = <&mdio>;
+ pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
+ pinctrl-names = "default";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4 0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan5";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ };
+
+ port@6 {
+ /* 88E1512 external phy */
+ reg = <6>;
+ label = "lan6";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&rear_button_pins>;
+ pinctrl-names = "default";
+
+ button_0 {
+ /* The rear SW3 button */
+ label = "Rear Button";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <BTN_0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index a633be3..cd31602 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -303,16 +303,6 @@
gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
};
- reg_usb2_1_vbus: v5-vbus1 {
- compatible = "regulator-fixed";
- regulator-name = "v5.0-vbus1";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
- };
-
reg_sata0: pwr-sata0 {
compatible = "regulator-fixed";
regulator-name = "pwr_en_sata0";
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
new file mode 100644
index 0000000..3f792a5
--- /dev/null
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -0,0 +1,115 @@
+/*
+ * Device Tree file for SolidRun Armada 38x Microsom
+ *
+ * Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board. Things will change, don't expect this file to
+ * remain compatible info the future.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* 256 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+
+ internal-regs {
+ ethernet@70000 {
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ pinctrl-names = "default";
+ phy = <&phy_dedicated>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+ };
+
+ mdio@72004 {
+ /*
+ * Add the phy clock here, so the phy can be
+ * accessed to read its IDs prior to binding
+ * with the driver.
+ */
+ pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>;
+ pinctrl-names = "default";
+
+ phy_dedicated: ethernet-phy@0 {
+ /*
+ * Annoyingly, the marvell phy driver
+ * configures the LED register, rather
+ * than preserving reset-loaded setting.
+ * We undo that rubbish here.
+ */
+ marvell,reg-init = <3 16 0 0x101e>;
+ reg = <0>;
+ };
+ };
+
+ pinctrl@18000 {
+ microsom_phy_clk_pins: microsom-phy-clk-pins {
+ marvell,pins = "mpp45";
+ marvell,function = "ref";
+ };
+ };
+
+ rtc@a3800 {
+ /*
+ * If the rtc doesn't work, run "date reset"
+ * twice in u-boot.
+ */
+ status = "okay";
+ };
+
+ serial@12000 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 58b5008..13cf69a8 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -151,42 +151,42 @@
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0xe0000>;
- read-only;
- };
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@e0000 {
- label = "u-boot-env";
- reg = <0xe0000 0x20000>;
- read-only;
- };
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x000e0000>;
+ read-only;
+ };
- partition@100000 {
- label = "u-boot-env2";
- reg = <0x100000 0x20000>;
- read-only;
- };
+ partition@e0000 {
+ label = "u-boot-env";
+ reg = <0x000e0000 0x00020000>;
+ read-only;
+ };
- partition@120000 {
- label = "zImage";
- reg = <0x120000 0x400000>;
- };
+ partition@100000 {
+ label = "u-boot-env2";
+ reg = <0x00100000 0x00020000>;
+ read-only;
+ };
- partition@520000 {
- label = "initrd";
- reg = <0x520000 0x400000>;
- };
+ partition@120000 {
+ label = "zImage";
+ reg = <0x00120000 0x00400000>;
+ };
- partition@xE00000 {
- label = "boot";
- reg = <0xE00000 0x3F200000>;
- };
+ partition@520000 {
+ label = "initrd";
+ reg = <0x00520000 0x00400000>;
+ };
- partition@flash {
- label = "flash";
- reg = <0x0 0x40000000>;
+ partition@e00000 {
+ label = "boot";
+ reg = <0x00e00000 0x3f200000>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 6fe8972..62175a8 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -141,7 +141,7 @@
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
- isil,irq2-can-wakeup-machine;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 2778533..3878793 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -91,6 +91,23 @@
#address-cells = <1>;
#size-cells = <1>;
+ pcie_phy: phy@0301d0a0 {
+ compatible = "brcm,cygnus-pcie-phy";
+ reg = <0x0301d0a0 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcie0_phy: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ pcie1_phy: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
pinctrl: pinctrl@0x0301d0c8 {
compatible = "brcm,cygnus-pinmux";
reg = <0x0301d0c8 0x30>,
@@ -101,6 +118,7 @@
compatible = "brcm,cygnus-crmu-gpio";
reg = <0x03024800 0x50>,
<0x03024008 0x18>;
+ ngpios = <6>;
#gpio-cells = <2>;
gpio-controller;
};
@@ -127,6 +145,7 @@
compatible = "brcm,cygnus-ccm-gpio";
reg = <0x1800a000 0x50>,
<0x0301d164 0x20>;
+ ngpios = <24>;
#gpio-cells = <2>;
gpio-controller;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -161,7 +180,21 @@
ranges = <0x81000000 0 0 0x28000000 0 0x00010000
0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+ phys = <&pcie0_phy>;
+ phy-names = "pcie-phy";
+
status = "disabled";
+
+ msi-parent = <&msi0>;
+ msi0: msi@18012000 {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+ <GIC_SPI 97 IRQ_TYPE_NONE>,
+ <GIC_SPI 98 IRQ_TYPE_NONE>,
+ <GIC_SPI 99 IRQ_TYPE_NONE>;
+ };
};
pcie1: pcie@18013000 {
@@ -182,7 +215,21 @@
ranges = <0x81000000 0 0 0x48000000 0 0x00010000
0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy";
+
status = "disabled";
+
+ msi-parent = <&msi1>;
+ msi1: msi@18013000 {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>,
+ <GIC_SPI 103 IRQ_TYPE_NONE>,
+ <GIC_SPI 104 IRQ_TYPE_NONE>,
+ <GIC_SPI 105 IRQ_TYPE_NONE>;
+ };
};
uart0: serial@18020000 {
@@ -245,13 +292,63 @@
gpio_asiu: gpio@180a5000 {
compatible = "brcm,cygnus-asiu-gpio";
reg = <0x180a5000 0x668>;
+ ngpios = <146>;
#gpio-cells = <2>;
gpio-controller;
- pinmux = <&pinctrl>;
-
interrupt-controller;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinctrl 0 42 1>,
+ <&pinctrl 1 44 3>,
+ <&pinctrl 4 48 1>,
+ <&pinctrl 5 50 3>,
+ <&pinctrl 8 126 1>,
+ <&pinctrl 9 155 1>,
+ <&pinctrl 10 152 1>,
+ <&pinctrl 11 154 1>,
+ <&pinctrl 12 153 1>,
+ <&pinctrl 13 127 3>,
+ <&pinctrl 16 140 1>,
+ <&pinctrl 17 145 7>,
+ <&pinctrl 24 130 10>,
+ <&pinctrl 34 141 4>,
+ <&pinctrl 38 54 1>,
+ <&pinctrl 39 56 3>,
+ <&pinctrl 42 60 3>,
+ <&pinctrl 45 64 3>,
+ <&pinctrl 48 68 2>,
+ <&pinctrl 50 84 6>,
+ <&pinctrl 56 94 6>,
+ <&pinctrl 62 72 1>,
+ <&pinctrl 63 70 1>,
+ <&pinctrl 64 80 1>,
+ <&pinctrl 65 74 3>,
+ <&pinctrl 68 78 1>,
+ <&pinctrl 69 82 1>,
+ <&pinctrl 70 156 17>,
+ <&pinctrl 87 104 12>,
+ <&pinctrl 99 102 2>,
+ <&pinctrl 101 90 4>,
+ <&pinctrl 105 116 6>,
+ <&pinctrl 111 100 2>,
+ <&pinctrl 113 122 4>,
+ <&pinctrl 123 11 1>,
+ <&pinctrl 124 38 4>,
+ <&pinctrl 128 43 1>,
+ <&pinctrl 129 47 1>,
+ <&pinctrl 130 49 1>,
+ <&pinctrl 131 53 1>,
+ <&pinctrl 132 55 1>,
+ <&pinctrl 133 59 1>,
+ <&pinctrl 134 63 1>,
+ <&pinctrl 135 67 1>,
+ <&pinctrl 136 71 1>,
+ <&pinctrl 137 73 1>,
+ <&pinctrl 138 77 1>,
+ <&pinctrl 139 79 1>,
+ <&pinctrl 140 81 1>,
+ <&pinctrl 141 83 1>,
+ <&pinctrl 142 10 1>;
};
touchscreen: tsc@180a6000 {
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 58aca27..10bdef5 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -32,6 +32,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-nsp.h>
#include "skeleton.dtsi"
@@ -40,9 +41,30 @@
model = "Broadcom Northstar Plus SoC";
interrupt-parent = <&gic>;
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ enable-method = "brcm,bcm-nsp-smp";
+ secondary-boot-reg = <0xffff042c>;
+ reg = <0x1>;
+ };
+ };
+
mpcore {
compatible = "simple-bus";
- ranges = <0x00000000 0x19020000 0x00003000>;
+ ranges = <0x00000000 0x19000000 0x00023000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -58,27 +80,50 @@
};
};
- L2: l2-cache {
- compatible = "arm,pl310-cache";
- reg = <0x2000 0x1000>;
- cache-unified;
- cache-level = <2>;
+ a9pll: arm_clk@00000 {
+ #clock-cells = <0>;
+ compatible = "brcm,nsp-armpll";
+ clocks = <&osc>;
+ reg = <0x00000 0x1000>;
};
- gic: interrupt-controller@19021000 {
+ timer@20200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x20200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ };
+
+ twd-timer@20600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x20600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&periph_clk>;
+ };
+
+ twd-watchdog@20620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0x20620 0x20>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&periph_clk>;
+ };
+
+ gic: interrupt-controller@21000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x0100 0x100>;
+ reg = <0x21000 0x1000>,
+ <0x20100 0x100>;
};
- timer@19020200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x0200 0x100>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&periph_clk>;
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x22000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
};
};
@@ -87,33 +132,178 @@
#size-cells = <1>;
ranges;
- periph_clk: periph_clk {
- compatible = "fixed-clock";
+ osc: oscillator {
#clock-cells = <0>;
- clock-frequency = <500000000>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ iprocmed: iprocmed {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ iprocslow: iprocslow {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ periph_clk: periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&a9pll>;
+ clock-div = <2>;
+ clock-mult = <1>;
};
};
axi {
compatible = "simple-bus";
- ranges = <0x00000000 0x18000000 0x00001000>;
+ ranges = <0x00000000 0x18000000 0x0011ba08>;
#address-cells = <1>;
#size-cells = <1>;
- uart0: serial@18000300 {
+ uart0: serial@0300 {
compatible = "ns16550a";
reg = <0x0300 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <62499840>;
+ clocks = <&osc>;
status = "disabled";
};
- uart1: serial@18000400 {
+ uart1: serial@0400 {
compatible = "ns16550a";
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <62499840>;
+ clocks = <&osc>;
status = "disabled";
};
+
+ pcie0: pcie@12000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x12000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <0>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+
+ /* Note: The HW does not support I/O resources. So,
+ * only the memory resource range is being specified.
+ */
+ ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+ status = "disabled";
+ };
+
+ pcie1: pcie@13000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x13000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <1>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+
+ /* Note: The HW does not support I/O resources. So,
+ * only the memory resource range is being specified.
+ */
+ ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+ status = "disabled";
+ };
+
+ pcie2: pcie@14000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x14000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+
+ /* Note: The HW does not support I/O resources. So,
+ * only the memory resource range is being specified.
+ */
+ ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
+
+ status = "disabled";
+ };
+
+ nand: nand@26000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+ reg = <0x026000 0x600>,
+ <0x11b408 0x600>,
+ <0x026f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcm,nand-has-wp;
+ };
+
+ i2c0: i2c@38000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x38000 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ };
+
+ lcpll0: lcpll0@3f100 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-lcpll0";
+ reg = <0x3f100 0x14>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "pcie_phy", "sdio",
+ "ddr_phy";
+ };
+
+ genpll: genpll@3f140 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-genpll";
+ reg = <0x3f140 0x24>;
+ clocks = <&osc>;
+ clock-output-names = "genpll", "phy", "ethernetclk",
+ "usbclk", "iprocfast", "sata1",
+ "sata2";
+ };
+
+ pinctrl: pinctrl@3f1c0 {
+ compatible = "brcm,nsp-pinmux";
+ reg = <0x3f1c0 0x04>,
+ <0x30028 0x04>,
+ <0x3f408 0x04>;
+ };
};
};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 446c586..b52927c 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -50,6 +50,36 @@
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
+
+ wireless {
+ label = "bcm53xx:white:wireless";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wps {
+ label = "bcm53xx:white:wps";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz-2 {
+ label = "bcm53xx:white:5ghz-2";
+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3 {
+ label = "bcm53xx:white:usb3";
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb2 {
+ label = "bcm53xx:white:usb2";
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
};
gpio-keys {
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 6f50f67..65a1309 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -8,6 +8,7 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include <dt-bindings/clock/bcm-nsp.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -27,7 +28,7 @@
compatible = "ns16550";
reg = <0x0300 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <100000000>;
+ clocks = <&iprocslow>;
status = "disabled";
};
@@ -35,48 +36,55 @@
compatible = "ns16550";
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <100000000>;
+ clocks = <&iprocslow>;
status = "disabled";
};
};
mpcore {
compatible = "simple-bus";
- ranges = <0x00000000 0x19020000 0x00003000>;
+ ranges = <0x00000000 0x19000000 0x00023000>;
#address-cells = <1>;
#size-cells = <1>;
- scu@0000 {
+ a9pll: arm_clk@00000 {
+ #clock-cells = <0>;
+ compatible = "brcm,nsp-armpll";
+ clocks = <&osc>;
+ reg = <0x00000 0x1000>;
+ };
+
+ scu@20000 {
compatible = "arm,cortex-a9-scu";
- reg = <0x0000 0x100>;
+ reg = <0x20000 0x100>;
};
- timer@0200 {
+ timer@20200 {
compatible = "arm,cortex-a9-global-timer";
- reg = <0x0200 0x100>;
+ reg = <0x20200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_periph>;
+ clocks = <&periph_clk>;
};
- local-timer@0600 {
+ local-timer@20600 {
compatible = "arm,cortex-a9-twd-timer";
- reg = <0x0600 0x100>;
+ reg = <0x20600 0x100>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_periph>;
+ clocks = <&periph_clk>;
};
- gic: interrupt-controller@1000 {
+ gic: interrupt-controller@21000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x0100 0x100>;
+ reg = <0x21000 0x1000>,
+ <0x20100 0x100>;
};
- L2: cache-controller@2000 {
+ L2: cache-controller@22000 {
compatible = "arm,pl310-cache";
- reg = <0x2000 0x1000>;
+ reg = <0x22000 0x1000>;
cache-unified;
arm,shared-override;
prefetch-data = <1>;
@@ -94,14 +102,37 @@
clocks {
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges;
- /* As long as we do not have a real clock driver us this
- * fixed clock */
- clk_periph: periph {
- compatible = "fixed-clock";
+ osc: oscillator {
#clock-cells = <0>;
- clock-frequency = <400000000>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ iprocmed: iprocmed {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ iprocslow: iprocslow {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ periph_clk: periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&a9pll>;
+ clock-div = <2>;
+ clock-mult = <1>;
};
};
@@ -178,6 +209,25 @@
};
};
+ lcpll0: lcpll0@1800c100 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-lcpll0";
+ reg = <0x1800c100 0x14>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "pcie_phy", "sdio",
+ "ddr_phy";
+ };
+
+ genpll: genpll@1800c140 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-genpll";
+ reg = <0x1800c140 0x24>;
+ clocks = <&osc>;
+ clock-output-names = "genpll", "phy", "ethernetclk",
+ "usbclk", "iprocfast", "sata1",
+ "sata2";
+ };
+
nand: nand@18028000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index 34cd640..d0560e8 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -43,18 +43,31 @@
#address-cells = <1>;
#size-cells = <0>;
- arm_timer_clk: arm_timer_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <500000000>;
- };
-
+ /* UBUS peripheral clock */
periph_clk: periph_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
clock-output-names = "periph";
};
+
+ /* peripheral clock for system timer */
+ axi_clk: axi_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&armpll>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /* APB bus clock */
+ apb_clk: apb_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&armpll>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
};
/* ARM bus */
@@ -93,14 +106,14 @@
compatible = "arm,cortex-a9-global-timer";
reg = <0x1e200 0x20>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&arm_timer_clk>;
+ clocks = <&axi_clk>;
};
local_timer: local-timer@1e600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x1e600 0x20>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&arm_timer_clk>;
+ clocks = <&axi_clk>;
};
twd_watchdog: watchdog@1e620 {
@@ -109,6 +122,13 @@
interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
};
+ armpll: armpll {
+ #clock-cells = <0>;
+ compatible = "brcm,bcm63138-armpll";
+ clocks = <&periph_clk>;
+ reg = <0x20000 0xf00>;
+ };
+
pmb0: reset-controller@4800c0 {
compatible = "brcm,bcm63138-pmb";
reg = <0x4800c0 0x10>;
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
new file mode 100644
index 0000000..251a486
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -0,0 +1,56 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ model = "NorthStar SVK (BCM94708)";
+ compatible = "brcm,bcm94708", "brcm,bcm4708";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
new file mode 100644
index 0000000..b16cac9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -0,0 +1,56 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ model = "NorthStar SVK (BCM94709)";
+ compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
new file mode 100644
index 0000000..05a985a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -0,0 +1,63 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ model = "NorthStar SVK (BCM953012K)";
+ compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x00000000 0x10000000>;
+ };
+};
+
+&uart0 {
+ clock-frequency = <62499840>;
+ status = "okay";
+};
+
+&uart1 {
+ clock-frequency = <62499840>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 16303db..e298450 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -55,3 +55,62 @@
&uart1 {
status = "okay";
};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
+
+&nand {
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+
+ partition@0 {
+ label = "nboot";
+ reg = <0x00000000 0x00200000>;
+ read-only;
+ };
+ partition@1 {
+ label = "nenv";
+ reg = <0x00200000 0x00400000>;
+ };
+ partition@2 {
+ label = "nsystem";
+ reg = <0x00600000 0x00a00000>;
+ };
+ partition@3 {
+ label = "nrootfs";
+ reg = <0x01000000 0x03000000>;
+ };
+ partition@4 {
+ label = "ncustfs";
+ reg = <0x04000000 0x3c000000>;
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_sel>;
+ nand_sel: nand_sel {
+ function = "nand";
+ groups = "nand_grp";
+ };
+};
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index eaadac3..ae81009 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -435,6 +435,29 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ wdt0: watchdog@1000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x1000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <0>;
+ };
+
+ wdt1: watchdog@2000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x2000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ wdt2: watchdog@3000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x3000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
sm_gpio1: gpio@5000 {
compatible = "snps,dw-apb-gpio";
reg = <0x5000 0x400>;
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index b16df15..6d06b61 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -396,6 +396,29 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ wdt0: watchdog@1000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x1000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <0>;
+ };
+
+ wdt1: watchdog@2000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x2000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ wdt2: watchdog@3000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x3000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
sm_gpio1: gpio@5000 {
compatible = "snps,dw-apb-gpio";
reg = <0x5000 0x400>;
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index da28c97..33b2875 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -84,17 +84,49 @@
gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ reg_sdio1_vmmc: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "sdio1_vmmc";
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_sdio1_vqmmc: regulator@4 {
+ compatible = "regulator-gpio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "sdio1_vqmmc";
+ regulator-type = "voltage";
+ enable-active-high;
+ gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
+ states = <3300000 0x1
+ 1800000 0x0>;
+ };
+ };
+};
+
+&soc_pinctrl {
+ sd1gpio_pmux: sd1pwr-pmux {
+ groups = "G23", "G32";
+ function = "gpio";
};
};
&sdhci1 {
- broken-cd;
- sdhci,wp-inverted;
+ vmmc-supply = <®_sdio1_vmmc>;
+ vqmmc-supply = <®_sdio1_vqmmc>;
+ cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
+ pinctrl-names = "default";
status = "okay";
};
&sdhci2 {
- broken-cd;
bus-width = <8>;
non-removable;
status = "okay";
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 8ea177f..5f0abf6 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -309,7 +309,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1400 0x100>;
- interrupt-parent = <&aic>;
interrupts = <4>;
clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi0_pmux>;
@@ -322,7 +321,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1800 0x100>;
- interrupt-parent = <&aic>;
interrupts = <5>;
clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi1_pmux>;
@@ -417,6 +415,11 @@
soc_pinctrl: pin-controller {
compatible = "marvell,berlin2q-soc-pinctrl";
+ sd1_pmux: sd1-pmux {
+ groups = "G31";
+ function = "sd1";
+ };
+
twsi0_pmux: twsi0-pmux {
groups = "G6";
function = "twsi0";
@@ -508,6 +511,29 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ wdt0: watchdog@1000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x1000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <0>;
+ };
+
+ wdt1: watchdog@2000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x2000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ wdt2: watchdog@3000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x3000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
sm_gpio1: gpio@5000 {
compatible = "snps,dw-apb-gpio";
reg = <0x5000 0x400>;
@@ -528,7 +554,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x7000 0x100>;
- interrupt-parent = <&sic>;
interrupts = <6>;
clocks = <&refclk>;
pinctrl-0 = <&twsi2_pmux>;
@@ -541,7 +566,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x8000 0x100>;
- interrupt-parent = <&sic>;
interrupts = <7>;
clocks = <&refclk>;
pinctrl-0 = <&twsi3_pmux>;
@@ -552,7 +576,6 @@
uart0: uart@9000 {
compatible = "snps,dw-apb-uart";
reg = <0x9000 0x100>;
- interrupt-parent = <&sic>;
interrupts = <8>;
clocks = <&refclk>;
reg-shift = <2>;
@@ -564,7 +587,6 @@
uart1: uart@a000 {
compatible = "snps,dw-apb-uart";
reg = <0xa000 0x100>;
- interrupt-parent = <&sic>;
interrupts = <9>;
clocks = <&refclk>;
reg-shift = <2>;
diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/compulab-sb-som.dtsi
new file mode 100644
index 0000000..93d7e23
--- /dev/null
+++ b/arch/arm/boot/dts/compulab-sb-som.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ model = "CompuLab SB-SOM";
+ compatible = "compulab,sb-som";
+
+ vsb_3v3: fixedregulator-v3_3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsb_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ enable-active-high;
+ };
+
+ lcd0: display {
+ compatible = "startek,startek-kd050c", "panel-dpi";
+ label = "lcd";
+
+ panel-timing {
+ clock-frequency = <33000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <43>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+ hdmi_conn: connector@0 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+ };
+};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 3c99cfa..b6543a8 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -64,7 +64,6 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
- ti,hwmods = "l3_main";
prcm: prcm@48180000 {
compatible = "ti,dm816-prcm";
@@ -180,6 +179,8 @@
#address-cells = <2>;
#size-cells = <1>;
interrupts = <100>;
+ dmas = <&edma 52>;
+ dma-names = "rxtx";
gpmc,num-cs = <6>;
gpmc,num-waitpins = <2>;
};
@@ -226,6 +227,13 @@
};
};
+ spinbox: spinbox@480ca000 {
+ compatible = "ti,omap4-hwspinlock";
+ reg = <0x480ca000 0x2000>;
+ ti,hwmods = "spinbox";
+ #hwlock-cells = <1>;
+ };
+
mdio: mdio@4a100800 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
@@ -319,6 +327,7 @@
reg = <0x48044000 0x2000>;
interrupts = <92>;
ti,hwmods = "timer4";
+ ti,timer-pwm;
};
timer5: timer@48046000 {
@@ -326,6 +335,7 @@
reg = <0x48046000 0x2000>;
interrupts = <93>;
ti,hwmods = "timer5";
+ ti,timer-pwm;
};
timer6: timer@48048000 {
@@ -333,6 +343,7 @@
reg = <0x48048000 0x2000>;
interrupts = <94>;
ti,hwmods = "timer6";
+ ti,timer-pwm;
};
timer7: timer@4804a000 {
@@ -340,6 +351,7 @@
reg = <0x4804a000 0x2000>;
interrupts = <95>;
ti,hwmods = "timer7";
+ ti,timer-pwm;
};
uart1: uart@48020000 {
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index e6fa251..af3cb63 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -62,6 +62,10 @@
pinctrl-0 = <&pmx_gpio_19>;
pinctrl-names = "default";
};
+
+ gpu-subsystem {
+ status = "okay";
+ };
};
&uart0 { status = "okay"; };
@@ -74,6 +78,10 @@
reg = <1>;
};
+&gpu {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
clock-frequency = <100000>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index cd58c2e..698d58c 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -33,6 +33,12 @@
marvell,tauros2-cache-features = <0>;
};
+ gpu-subsystem {
+ compatible = "marvell,dove-gpu-subsystem";
+ cores = <&gpu>;
+ status = "disabled";
+ };
+
i2c-mux {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
@@ -460,6 +466,12 @@
#clock-cells = <1>;
};
+ divider_clk: core-clock@0064 {
+ compatible = "marvell,dove-divider-clock";
+ reg = <0x0064 0x8>;
+ #clock-cells = <1>;
+ };
+
pinctrl: pin-ctrl@0200 {
compatible = "marvell,dove-pinctrl";
reg = <0x0200 0x14>,
@@ -776,6 +788,16 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ gpu: gpu@840000 {
+ clocks = <÷r_clk 1>;
+ clock-names = "core";
+ compatible = "vivante,gc";
+ interrupts = <48>;
+ power-domains = <&gpu_domain>;
+ reg = <0x840000 0x4000>;
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 864f600..cfc24e5 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -154,100 +154,100 @@
vtt_pin: pinmux_vtt_pin {
pinctrl-single,pins = <
- 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
+ DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
- 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+ DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+ DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
- 0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
- 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
+ DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
+ DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
>;
};
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
- 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
- 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
- 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
- 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
- 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
- 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
+ DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */
+ DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */
+ DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */
+ DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
+ DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
+ DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
>;
};
mcspi2_pins: pinmux_mcspi2_pins {
pinctrl-single,pins = <
- 0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
- 0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
- 0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
- 0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+ DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */
+ DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+ DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+ DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
- 0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
- 0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
- 0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
+ DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
+ DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
- 0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
- 0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
- 0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
- 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
+ DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
+ DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
>;
};
qspi1_pins: pinmux_qspi1_pins {
pinctrl-single,pins = <
- 0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */
- 0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */
- 0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
- 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
- 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
- 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
- 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
- 0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
- 0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
- 0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
+ DRA7XX_CORE_IOPAD(0x344c, PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */
+ DRA7XX_CORE_IOPAD(0x3450, PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */
+ DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
+ DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
+ DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
+ DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
+ DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
+ DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
+ DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
+ DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
>;
};
usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
- 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
>;
};
usb2_pins: pinmux_usb2_pins {
pinctrl-single,pins = <
- 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+ DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
>;
};
@@ -257,60 +257,60 @@
* SW5.9 (GPMC_WPN) = LOW
* SW5.1 (NAND_BOOTn) = HIGH */
pinctrl-single,pins = <
- 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
- 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
- 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
- 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
- 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
- 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
- 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
- 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
- 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
- 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
- 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
- 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
- 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
- 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
- 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
- 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
- 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
- 0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */
+ DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
+ DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
+ DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
+ DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
+ DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
+ DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
+ DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
+ DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
+ DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
+ DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
+ DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
+ DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
+ DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
+ DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
+ DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
+ DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
+ DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */
+ DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
+ DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */
+ DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
+ DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
+ DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */
- 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */
- 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */
- 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */
- 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */
- 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */
- 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */
- 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */
- 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */
- 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */
- 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */
- 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */
+ DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */
+ DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */
+ DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */
+ DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */
+ DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */
+ DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */
/* Slave 2 */
- 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
- 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
- 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
- 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
- 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
- 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
- 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
- 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
- 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
- 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
- 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
- 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
+ DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
>;
};
@@ -318,85 +318,85 @@
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 */
- 0x250 (MUX_MODE15)
- 0x254 (MUX_MODE15)
- 0x258 (MUX_MODE15)
- 0x25c (MUX_MODE15)
- 0x260 (MUX_MODE15)
- 0x264 (MUX_MODE15)
- 0x268 (MUX_MODE15)
- 0x26c (MUX_MODE15)
- 0x270 (MUX_MODE15)
- 0x274 (MUX_MODE15)
- 0x278 (MUX_MODE15)
- 0x27c (MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15)
/* Slave 2 */
- 0x198 (MUX_MODE15)
- 0x19c (MUX_MODE15)
- 0x1a0 (MUX_MODE15)
- 0x1a4 (MUX_MODE15)
- 0x1a8 (MUX_MODE15)
- 0x1ac (MUX_MODE15)
- 0x1b0 (MUX_MODE15)
- 0x1b4 (MUX_MODE15)
- 0x1b8 (MUX_MODE15)
- 0x1bc (MUX_MODE15)
- 0x1c0 (MUX_MODE15)
- 0x1c4 (MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
- 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
- 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
+ DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
- 0x23c (MUX_MODE15)
- 0x240 (MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
>;
};
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
- 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
- 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+ DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+ DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
- 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
- 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
+ DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
+ DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
atl_pins: pinmux_atl_pins {
pinctrl-single,pins = <
- 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
- 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
+ DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
+ DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
>;
};
mcasp3_pins: pinmux_mcasp3_pins {
pinctrl-single,pins = <
- 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
- 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
- 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
- 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
+ DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
+ DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
+ DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
>;
};
mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
pinctrl-single,pins = <
- 0x324 (MUX_MODE15)
- 0x328 (MUX_MODE15)
- 0x32c (MUX_MODE15)
- 0x330 (MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15)
>;
};
};
@@ -504,6 +504,7 @@
regulator-max-microvolt = <1050000>;
regulator-always-on;
regulator-boot-on;
+ regulator-allow-bypass;
};
ldoln_reg: ldoln {
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index fe99231..c4d9175 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -41,6 +41,7 @@
ethernet1 = &cpsw_emac1;
d_can0 = &dcan1;
d_can1 = &dcan2;
+ spi0 = &qspi;
};
timer {
@@ -1153,8 +1154,10 @@
qspi: qspi@4b300000 {
compatible = "ti,dra7xxx-qspi";
- reg = <0x4b300000 0x100>;
- reg-names = "qspi_base";
+ reg = <0x4b300000 0x100>,
+ <0x5c000000 0x4000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ syscon-chipselects = <&scm_conf 0x558>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "qspi";
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index d6104d5..00b1200 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -142,158 +142,158 @@
&dra7_pmx_core {
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
- 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
>;
};
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
- 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
- 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+ DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+ DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
>;
};
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
- 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
- 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+ DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+ DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
>;
};
nand_default: nand_default {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
- 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
- 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
- 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
- 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
- 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
- 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
- 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
- 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
- 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
- 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
- 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
- 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
- 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
- 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
- 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
- 0xb4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
- 0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */
+ DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
+ DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
+ DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
+ DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
+ DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
+ DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
+ DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
+ DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
+ DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
+ DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
+ DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
+ DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
+ DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
+ DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
+ DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
+ DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
+ DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
+ DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
+ DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
+ DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
+ DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
+ DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */
>;
};
usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
- 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
>;
};
usb2_pins: pinmux_usb2_pins {
pinctrl-single,pins = <
- 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+ DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
>;
};
tps65917_pins_default: tps65917_pins_default {
pinctrl-single,pins = <
- 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
+ DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
>;
};
mmc1_pins_default: mmc1_pins_default {
pinctrl-single,pins = <
- 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
- 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
- 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
- 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
- 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
- 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
- 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
>;
};
mmc2_pins_default: mmc2_pins_default {
pinctrl-single,pins = <
- 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
- 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
- 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
- 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
- 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
- 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
- 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
- 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
- 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
- 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>;
};
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
- 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
- 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+ DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+ DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
- 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
- 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
+ DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
+ DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
qspi1_pins: pinmux_qspi1_pins {
pinctrl-single,pins = <
- 0x74 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
- 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
- 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
- 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
- 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
- 0x88 (PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
- 0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
+ DRA7XX_CORE_IOPAD(0x3474, PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
+ DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
+ DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
+ DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
+ DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
+ DRA7XX_CORE_IOPAD(0x3488, PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
+ DRA7XX_CORE_IOPAD(0x34b8, PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
>;
};
hdmi_pins: pinmux_hdmi_pins {
pinctrl-single,pins = <
- 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
- 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
+ DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
+ DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
+ DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
>;
};
atl_pins: pinmux_atl_pins {
pinctrl-single,pins = <
- 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
- 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
+ DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
+ DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
>;
};
mcasp3_pins: pinmux_mcasp3_pins {
pinctrl-single,pins = <
- 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
- 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
- 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
- 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
+ DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
+ DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
+ DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
>;
};
mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
pinctrl-single,pins = <
- 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE15)
- 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE15)
- 0x32c (PIN_INPUT_PULLDOWN | MUX_MODE15)
- 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15)
>;
};
};
@@ -373,6 +373,7 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
+ regulator-allow-bypass;
};
ldo2_reg: ldo2 {
@@ -380,6 +381,7 @@
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ regulator-allow-bypass;
};
ldo3_reg: ldo3 {
@@ -478,6 +480,8 @@
&uart1 {
status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3e0>;
};
&elm {
@@ -627,18 +631,18 @@
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 2 */
- 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
- 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
- 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
- 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
- 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
- 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
- 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
- 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
- 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
- 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
- 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
- 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
+ DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
>;
};
@@ -646,33 +650,33 @@
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 2 */
- 0x198 (MUX_MODE15)
- 0x19c (MUX_MODE15)
- 0x1a0 (MUX_MODE15)
- 0x1a4 (MUX_MODE15)
- 0x1a8 (MUX_MODE15)
- 0x1ac (MUX_MODE15)
- 0x1b0 (MUX_MODE15)
- 0x1b4 (MUX_MODE15)
- 0x1b8 (MUX_MODE15)
- 0x1bc (MUX_MODE15)
- 0x1c0 (MUX_MODE15)
- 0x1c4 (MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
- 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
+ DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
- 0x23c (MUX_MODE15)
- 0x240 (MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
>;
};
};
diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts
index a4ba31b..a4a281f 100644
--- a/arch/arm/boot/dts/ea3250.dts
+++ b/arch/arm/boot/dts/ea3250.dts
@@ -12,7 +12,7 @@
*/
/dts-v1/;
-/include/ "lpc32xx.dtsi"
+#include "lpc32xx.dtsi"
/ {
model = "Embedded Artists LPC3250 board based on NXP LPC3250";
@@ -22,7 +22,7 @@
memory {
device_type = "memory";
- reg = <0 0x4000000>;
+ reg = <0x80000000 0x4000000>;
};
ahb {
@@ -31,19 +31,6 @@
use-iram;
};
- /* Here, choose exactly one from: ohci, usbd */
- ohci@31020000 {
- transceiver = <&isp1301>;
- status = "okay";
- };
-
-/*
- usbd@31020000 {
- transceiver = <&isp1301>;
- status = "okay";
- };
-*/
-
/* 128MB Flash via SLC NAND controller */
slc: flash@20020000 {
status = "okay";
@@ -130,15 +117,6 @@
clock-frequency = <100000>;
};
- i2cusb: i2c@31020300 {
- clock-frequency = <100000>;
-
- isp1301: usb-transceiver@2d {
- compatible = "nxp,isp1301";
- reg = <0x2d>;
- };
- };
-
sd@20098000 {
wp-gpios = <&pca9532 5 0>;
cd-gpios = <&pca9532 4 0>;
@@ -279,3 +257,18 @@
};
};
};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+ transceiver = <&isp1301>;
+ status = "okay";
+};
+
+&i2cusb {
+ clock-frequency = <100000>;
+
+ isp1301: usb-transceiver@2d {
+ compatible = "nxp,isp1301";
+ reg = <0x2d>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 2f30d63..18e3def 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -152,6 +152,20 @@
interrupt-parent = <&gic>;
};
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* Reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
mipi_phy: video-phy@10020710 {
compatible = "samsung,s5pv210-mipi-video-phy";
#phy-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 3184e10..07e10ee 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -158,6 +158,20 @@
interrupt-parent = <&gic>;
};
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
dsi_0: dsi@11C80000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 110dbd4..e2439e8 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -88,6 +88,20 @@
status = "disabled";
};
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
fimd: fimd@14400000 {
compatible = "samsung,exynos5250-fimd";
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 731eefd..fad0779 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -102,6 +102,20 @@
reg = <0x10040000 0x5000>;
};
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
mct: mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0xB00>;
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index 7c4b9f2..848ffa78 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -284,6 +284,7 @@
#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x11 0x000
#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000
#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001
+#define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x16 0x000
#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x10 0x000
#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x15 0x000
@@ -439,6 +440,7 @@
#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW0__UART1_DTR 0x1a8 0x3a0 0x000 0x14 0x000
#define MX25_PAD_KPP_ROW0__GPIO_2_29 0x1a8 0x3a0 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW1__KPP_ROW1 0x1ac 0x3a4 0x000 0x10 0x000
@@ -446,6 +448,7 @@
#define MX25_PAD_KPP_ROW2__KPP_ROW2 0x1b0 0x3a8 0x000 0x10 0x000
#define MX25_PAD_KPP_ROW2__CSI_D0 0x1b0 0x3a8 0x488 0x13 0x002
+#define MX25_PAD_KPP_ROW2__UART1_DCD 0x1b0 0x3a8 0x000 0x14 0x000
#define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 677f81d..cde329e 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -24,6 +24,10 @@
i2c2 = &i2c3;
mmc0 = &esdhc1;
mmc1 = &esdhc2;
+ pwm0 = &pwm1;
+ pwm1 = &pwm2;
+ pwm2 = &pwm3;
+ pwm3 = &pwm4;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 5df0b24..7a80bd6 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -115,7 +115,7 @@
pwm: pwm@80064000 {
pinctrl-names = "default";
- pinctrl-0 = <&pwm3_pins_b>;
+ pinctrl-0 = <&pwm4_pins_a>;
status = "okay";
};
@@ -170,7 +170,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000>;
+ pwms = <&pwm 4 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index c5b57d4..fae7b90 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -405,6 +405,17 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ auart4_2pins_b: auart4@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_CTS__AUART4_RX
+ MX28_PAD_AUART0_RTS__AUART4_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
mac0_pins_a: mac0@0 {
reg = <0>;
fsl,pinmux-ids = <
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
new file mode 100644
index 0000000..0ff76a1
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -0,0 +1,302 @@
+/*
+ * Copyright 2015 Savoir-faire Linux
+ *
+ * This device tree is based on imx51-babbage.dts
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+ model = "Technologic Systems TS-4800";
+ compatible = "technologic,imx51-ts4800", "fsl,imx51";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory {
+ reg = <0x90000000 0x10000000>;
+ };
+
+ clocks {
+ ckih1 {
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ clock-frequency = <24576000>;
+ };
+ };
+
+ backlight_reg: regulator-backlight {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enable_lcd>;
+ regulator-name = "enable_lcd_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 78770>;
+ brightness-levels = <0 150 200 255>;
+ default-brightness-level = <1>;
+ power-supply = <&backlight_reg>;
+ };
+
+ display0: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+
+ display-timings {
+ 800x480p60 {
+ native-mode;
+ clock-frequency = <30066000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <50>;
+ hback-porch = <70>;
+ hsync-len = <50>;
+ vback-porch = <0>;
+ vfront-porch = <0>;
+ vsync-len = <50>;
+ };
+ };
+
+ port@0 {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
+ };
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "mii";
+ phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ rtc: m41t00@68 {
+ compatible = "stm,m41t00";
+ reg = <0x68>;
+ };
+};
+
+&ipu_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_backlight>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&weim {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_weim>;
+ status = "okay";
+
+ fpga@0 {
+ compatible = "simple-bus";
+ fsl,weim-cs-timing = <0x0061008F 0x00000002 0x1c022000
+ 0x00000000 0x1c092480 0x00000000>;
+ reg = <0 0x0000000 0x1d000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x1d000>;
+
+ syscon: syscon@b0010000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x10000 0x3d>;
+ reg-io-width = <2>;
+
+ wdt@e {
+ compatible = "technologic,ts4800-wdt";
+ syscon = <&syscon 0xe>;
+ };
+ };
+
+ touchscreen {
+ compatible = "technologic,ts4800-ts";
+ reg = <0x12000 0x1000>;
+ syscon = <&syscon 0x10 6>;
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+ MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */
+ >;
+ };
+
+ pinctrl_enable_lcd: enablelcdgrp {
+ fsl,pins = <
+ MX51_PAD_CSI2_D12__GPIO4_9 0x1c5
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+ MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+ MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+ MX51_PAD_GPIO1_0__GPIO1_0 0x100
+ MX51_PAD_GPIO1_1__GPIO1_1 0x100
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5
+ MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085
+ MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085
+ MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085
+ MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180
+ MX51_PAD_EIM_CS5__FEC_CRS 0x00000180
+ MX51_PAD_DISP2_DAT10__FEC_COL 0x00000180
+ MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x00000180
+ MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x00002180
+ MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x00002004
+ MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004
+ MX51_PAD_DI2_PIN2__FEC_MDC 0x00002004
+ MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x00002004
+ MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x00002004
+ MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x00002004
+ MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x00002004
+ MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x00002180
+ MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x000020a4
+ MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
+ MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
+ >;
+ };
+
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
+ MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
+ MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
+ MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
+ MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
+ MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
+ MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
+ MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
+ MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
+ MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
+ MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
+ MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
+ MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
+ MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
+ MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
+ MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
+ MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
+ MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
+ MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
+ MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
+ MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
+ MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
+ MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
+ MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
+ MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
+ MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
+ MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5
+ MX51_PAD_DI_GP4__DI2_PIN15 0x5
+ >;
+ };
+
+ pinctrl_pwm_backlight: backlightgrp {
+ fsl,pins = <
+ MX51_PAD_GPIO1_2__PWM1_PWMO 0x80000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
+ MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
+ MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX51_PAD_EIM_D25__UART3_RXD 0x1c5
+ MX51_PAD_EIM_D26__UART3_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_weim: weimgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_DTACK__EIM_DTACK 0x85
+ MX51_PAD_EIM_CS0__EIM_CS0 0x0
+ MX51_PAD_EIM_CS1__EIM_CS1 0x0
+ MX51_PAD_EIM_EB0__EIM_EB0 0x85
+ MX51_PAD_EIM_EB1__EIM_EB1 0x85
+ MX51_PAD_EIM_OE__EIM_OE 0x85
+ MX51_PAD_EIM_LBA__EIM_LBA 0x85
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 4b0ec07..c13a73a 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -104,10 +104,15 @@
compatible = "fsl,imx-display-subsystem";
ports = <&ipu1_di0>, <&ipu1_di1>;
};
+
+ gpu-subsystem {
+ compatible = "fsl,imx-gpu-subsystem";
+ cores = <&gpu_2d>, <&gpu_3d>;
+ };
};
&gpt {
- compatible = "fsl,imx6dl-gpt", "fsl,imx6q-gpt";
+ compatible = "fsl,imx6dl-gpt";
};
&hdmi {
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 58adf17..a51834e 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -154,7 +154,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
new file mode 100644
index 0000000..5acd0c6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -0,0 +1,785 @@
+/*
+ * Copyright 2015 Sutajio Ko-Usagi PTE LTD
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Kosagi Novena Dual/Quad";
+ compatible = "kosagi,imx6q-novena", "fsl,imx6q";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 10000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_novena>;
+ power-supply = <®_lvds_lcd>;
+ brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>;
+ default-brightness-level = <12>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys_novena>;
+
+ user-button {
+ label = "User Button";
+ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+
+ lid {
+ label = "Lid";
+ gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds_novena>;
+
+ heartbeat {
+ label = "novena:white:panel";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ panel: panel {
+ compatible = "innolux,n133hse-ea1", "simple-panel";
+ backlight = <&backlight>;
+ };
+
+ reg_2p5v: regulator-2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_audio_codec: regulator-audio-codec {
+ compatible = "regulator-fixed";
+ regulator-name = "es8328-power";
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <400000>;
+ gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_display: regulator-display {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-display-power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <200000>;
+ gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_lvds_lcd: regulator-lvds-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-lvds-power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_pcie: regulator-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie-bus-power";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_sata: regulator-sata {
+ compatible = "regulator-fixed";
+ regulator-name = "sata-power";
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <10000>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-es8328";
+ model = "imx-audio-es8328";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-amp-supply = <®_audio_codec>;
+ jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+ audio-routing =
+ "Speaker", "LOUT2",
+ "Speaker", "ROUT2",
+ "Speaker", "audio-amp",
+ "Headphone", "ROUT1",
+ "Headphone", "LOUT1",
+ "LINPUT1", "Mic Jack",
+ "RINPUT1", "Mic Jack",
+ "Mic Jack", "Mic Bias";
+ mux-int-port = <0x1>;
+ mux-ext-port = <0x3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_novena>;
+ status = "okay";
+};
+
+&ecspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3_novena>;
+ fsl,spi-num-chipselects = <3>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_novena>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ rxc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ txen-skew-ps = <0>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <3000>;
+ txd1-skew-ps = <3000>;
+ txd2-skew-ps = <3000>;
+ txd3-skew-ps = <3000>;
+ status = "okay";
+};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi_novena>;
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_novena>;
+ status = "okay";
+
+ accel: mma8452@1c {
+ compatible = "fsl,mma8452";
+ reg = <0x1c>;
+ };
+
+ rtc: pcf8523@68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+
+ sbs_battery: bq20z75@0b {
+ compatible = "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,i2c-retry-count = <50>;
+ };
+
+ touch: stmpe811@44 {
+ compatible = "st,stmpe811";
+ reg = <0x44>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stmpe_novena>;
+ vio-supply = <®_3p3v>;
+ vcc-supply = <®_3p3v>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <1>;
+ st,touch-det-delay = <2>;
+ st,settling = <2>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_novena>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ reg_sw1a: sw1a {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ reg_sw1c: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_sw2: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_sw3a: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_sw3b: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_sw4: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_swbst: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ regulator-boot-on;
+ };
+
+ reg_snvs: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vref: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vgen1: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ reg_vgen2: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ reg_vgen3: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_vgen4: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen5: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen6: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_novena>;
+ status = "okay";
+
+ codec: es8328@11 {
+ compatible = "everest,es8328";
+ reg = <0x11>;
+ DVDD-supply = <®_audio_codec>;
+ AVDD-supply = <®_audio_codec>;
+ PVDD-supply = <®_audio_codec>;
+ HPVDD-supply = <®_audio_codec>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sound_novena>;
+ clocks = <&clks IMX6QDL_CLK_CKO1>;
+ assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+ <&clks IMX6QDL_CLK_CKO1_SEL>,
+ <&clks IMX6QDL_CLK_PLL4_AUDIO>,
+ <&clks IMX6QDL_CLK_CKO1>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>,
+ <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>,
+ <&clks IMX6QDL_CLK_OSC>,
+ <&clks IMX6QDL_CLK_CKO1_PODF>;
+ assigned-clock-rates = <0 0 722534400 22579200>;
+ };
+};
+
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp_novena>;
+ linux,keymap = <
+ MATRIX_KEY(1, 1, KEY_CONFIG)
+ >;
+ status = "okay";
+};
+
+&ldb {
+ fsl,dual-channel;
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "jeida";
+ fsl,data-width = <24>;
+ fsl,panel = <&panel>;
+ status = "okay";
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie_novena>;
+ reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sata {
+ target-supply = <®_sata>;
+ fsl,transmit-level-mV = <1025>;
+ fsl,transmit-boost-mdB = <0>;
+ fsl,transmit-atten-16ths = <8>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_novena>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_novena>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_novena>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ dr_mode = "otg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_novena>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_swbst>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_novena>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_novena>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_audmux_novena: audmuxgrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_backlight_novena: backlightgrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b1
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b1
+ >;
+ };
+
+ pinctrl_ecspi3_novena: ecspi3grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_enet_novena: enetgrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b028
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b028
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b028
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b028
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b028
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ /* Ethernet reset */
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b1
+ >;
+ };
+
+ pinctrl_fpga_gpio: fpgagpiogrp-novena {
+ fsl,pins = <
+ /* FPGA power */
+ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1
+ /* Reset */
+ MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1
+ /* FPGA GPIOs */
+ MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b1
+ MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b1
+ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1
+ MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b1
+ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
+ MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
+ MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b1
+ MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1
+ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b1
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b1
+ MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b1
+ MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b1
+ MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b0b1
+ MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b1
+ MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b0b1
+ MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b1
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b1
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1
+ MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b1
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b0b1
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b1
+ MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b1
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b1
+ >;
+ };
+
+ pinctrl_fpga_eim: fpgaeimgrp-novena {
+ fsl,pins = <
+ /* FPGA power */
+ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1
+ /* Reset */
+ MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1
+ /* FPGA GPIOs */
+ MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0f1
+ MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0f1
+ MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0f1
+ MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0f1
+ MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0f1
+ MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0f1
+ MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0f1
+ MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0f1
+ MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0f1
+ MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0f1
+ MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0f1
+ MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0f1
+ MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0f1
+ MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0f1
+ MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0f1
+ MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0f1
+ MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0f1
+ MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0f1
+ MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0f1
+ MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0f1
+ MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0f1
+ MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0f1
+ MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0f1
+ MX6QDL_PAD_EIM_RW__EIM_RW 0xb0f1
+ MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb0f1
+ MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0f1
+ >;
+ };
+
+ pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
+ fsl,pins = <
+ /* User button */
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0
+ /* PCIe Wakeup */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1f0e0
+ /* Lid switch */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
+ >;
+ };
+
+ pinctrl_hdmi_novena: hdmigrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b1
+ >;
+ };
+
+ pinctrl_i2c1_novena: i2c1grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2_novena: i2c2grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3_novena: i2c3grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_kpp_novena: kppgrp-novena {
+ fsl,pins = <
+ /* Front panel button */
+ MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x1b0b1
+ /* Fake column driver, not connected */
+ MX6QDL_PAD_KEY_COL1__KEY_COL1 0x1b0b1
+ >;
+ };
+
+ pinctrl_leds_novena: ledsgrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b1
+ >;
+ };
+
+ pinctrl_pcie_novena: pciegrp-novena {
+ fsl,pins = <
+ /* Reset */
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1
+ /* Power On */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1
+ /* Wifi kill */
+ MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b1
+ >;
+ };
+
+ pinctrl_sata_novena: satagrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b1
+ >;
+ };
+
+ pinctrl_senoko_novena: senokogrp-novena {
+ fsl,pins = <
+ /* Senoko IRQ line */
+ MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x13048
+ /* Senoko reset line */
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b1
+ >;
+ };
+
+ pinctrl_sound_novena: soundgrp-novena {
+ fsl,pins = <
+ /* Audio power regulator */
+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b1
+ /* Headphone plug */
+ MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b1
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
+ >;
+ };
+
+ pinctrl_stmpe_novena: stmpegrp-novena {
+ fsl,pins = <
+ /* Touchscreen interrupt */
+ MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2_novena: uart2grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3_novena: uart3grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4_novena: uart4grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg_novena: usbotggrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_novena: usdhc2grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+ /* Write protect */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1
+ /* Card detect */
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3_novena: usdhc3grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 399103b..9b6a193 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -14,6 +14,7 @@
/ {
aliases {
+ ipu1 = &ipu2;
spi4 = &ecspi5;
};
@@ -153,6 +154,16 @@
status = "disabled";
};
+ gpu_vg: gpu@02204000 {
+ compatible = "vivante,gc";
+ reg = <0x02204000 0x4000>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>;
+ clock-names = "bus", "core";
+ power-domains = <&gpc 1>;
+ };
+
ipu2: ipu@02800000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -225,6 +236,11 @@
compatible = "fsl,imx-display-subsystem";
ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
};
+
+ gpu-subsystem {
+ compatible = "fsl,imx-gpu-subsystem";
+ cores = <&gpu_2d>, <&gpu_3d>, <&gpu_vg>;
+ };
};
&hdmi {
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 7b31fdb..5cd16f2 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -94,7 +94,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -174,6 +174,24 @@
status = "okay";
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+ status = "disabled";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -294,6 +312,24 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 1b66328..9fa8a10 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -151,10 +151,25 @@
status = "okay";
};
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi3 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -275,6 +290,18 @@
status = "okay";
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
@@ -338,6 +365,15 @@
>;
};
+ pinctrl_ecspi3: escpi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
+ >;
+ };
+
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
@@ -429,6 +465,18 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 7c51839..e8375e1 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -152,10 +152,17 @@
status = "okay";
};
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -247,7 +254,7 @@
&ldb {
status = "okay";
- lvds-channel@1 {
+ lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";
@@ -280,6 +287,18 @@
};
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
@@ -435,6 +454,18 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 929e0b3..66983dc 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -142,10 +142,17 @@
status = "okay";
};
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -260,6 +267,8 @@
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
+ regulator-boot-on;
+ regulator-always-on;
};
snvs_reg: vsnvs {
@@ -336,7 +345,7 @@
&ldb {
status = "okay";
- lvds-channel@1 {
+ lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";
@@ -369,6 +378,24 @@
};
};
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+ status = "disabled";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
@@ -528,6 +555,24 @@
>;
};
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 741f3d5..118bea5 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -198,6 +198,18 @@
status = "okay";
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&ssi1 {
status = "okay";
};
@@ -290,6 +302,18 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index d1e5048..cca39f1 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -164,6 +164,18 @@
status = "okay";
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
@@ -242,6 +254,18 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 8263fc1..d354d40 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -113,14 +113,14 @@
&clks {
assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
<&clks IMX6QDL_PLL4_BYPASS>,
- <&clks IMX6QDL_CLK_PLL4_POST_DIV>,
<&clks IMX6QDL_CLK_LDB_DI0_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+ <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
<&clks IMX6QDL_PLL4_BYPASS_SRC>,
<&clks IMX6QDL_CLK_PLL3_USB_OTG>,
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
- assigned-clock-rates = <0>, <0>, <24576000>;
+ assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
};
&ecspi1 {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 2b6cc8b..4f6ae92 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -30,6 +30,7 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
+ ipu0 = &ipu1;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
@@ -47,15 +48,6 @@
usbphy1 = &usbphy2;
};
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a00100 0x100>;
- interrupt-parent = <&intc>;
- };
-
clocks {
#address-cells = <1>;
#size-cells = <0>;
@@ -147,6 +139,27 @@
};
};
+ gpu_3d: gpu@00130000 {
+ compatible = "vivante,gc";
+ reg = <0x00130000 0x4000>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+ <&clks IMX6QDL_CLK_GPU3D_CORE>,
+ <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+ clock-names = "bus", "core", "shader";
+ power-domains = <&gpc 1>;
+ };
+
+ gpu_2d: gpu@00134000 {
+ compatible = "vivante,gc";
+ reg = <0x00134000 0x4000>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>;
+ clock-names = "bus", "core";
+ power-domains = <&gpc 1>;
+ };
+
timer@00a00600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
@@ -155,6 +168,15 @@
clocks = <&clks IMX6QDL_CLK_TWD>;
};
+ intc: interrupt-controller@00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
+ };
+
L2: l2-cache@00a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
@@ -173,8 +195,7 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
- 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
+ ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -227,7 +248,7 @@
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
- "rxtx7", "dma";
+ "rxtx7", "spba";
status = "disabled";
};
@@ -309,7 +330,7 @@
<&clks IMX6QDL_CLK_ESAI_EXTAL>,
<&clks IMX6QDL_CLK_ESAI_IPG>,
<&clks IMX6QDL_CLK_SPBA>;
- clock-names = "core", "mem", "extal", "fsys", "dma";
+ clock-names = "core", "mem", "extal", "fsys", "spba";
dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
dma-names = "rx", "tx";
status = "disabled";
@@ -378,7 +399,7 @@
"asrck_1", "asrck_2", "asrck_3", "asrck_4",
"asrck_5", "asrck_6", "asrck_7", "asrck_8",
"asrck_9", "asrck_a", "asrck_b", "asrck_c",
- "asrck_d", "asrck_e", "asrck_f", "dma";
+ "asrck_d", "asrck_e", "asrck_f", "spba";
dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
dma-names = "rxa", "rxb", "rxc",
@@ -906,6 +927,9 @@
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -917,6 +941,9 @@
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host";
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -927,6 +954,9 @@
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -937,6 +967,9 @@
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 3>;
dr_mode = "host";
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index d8ba99f..d12b250 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -151,7 +151,7 @@
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
- "rxtx7", "dma";
+ "rxtx7", "spba";
status = "disabled";
};
@@ -708,6 +708,9 @@
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -718,6 +721,9 @@
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -728,6 +734,9 @@
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 167f77b..a5f7602 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -222,7 +222,7 @@
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
- "rxtx7", "dma";
+ "rxtx7", "spba";
status = "disabled";
};
@@ -295,7 +295,7 @@
<&clks IMX6SX_CLK_ESAI_IPG>,
<&clks IMX6SX_CLK_SPBA>;
clock-names = "core", "mem", "extal",
- "fsys", "dma";
+ "fsys", "spba";
status = "disabled";
};
@@ -348,7 +348,7 @@
<&clks IMX6SX_CLK_ASRC_IPG>,
<&clks IMX6SX_CLK_SPDIF>,
<&clks IMX6SX_CLK_SPBA>;
- clock-names = "mem", "ipg", "asrck", "dma";
+ clock-names = "mem", "ipg", "asrck", "spba";
dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
<&sdma 19 20 1>, <&sdma 20 20 1>,
<&sdma 21 20 1>, <&sdma 22 20 1>;
@@ -783,6 +783,9 @@
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
fsl,anatop = <&anatop>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -793,6 +796,9 @@
clocks = <&clks IMX6SX_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -805,6 +811,9 @@
phy_type = "hsic";
fsl,anatop = <&anatop>;
dr_mode = "host";
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -1152,6 +1161,8 @@
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_IPG>;
clock-names = "adc";
+ fsl,adck-max-frequency = <30000000>, <40000000>,
+ <20000000>;
status = "disabled";
};
@@ -1161,6 +1172,8 @@
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_IPG>;
clock-names = "adc";
+ fsl,adck-max-frequency = <30000000>, <40000000>,
+ <20000000>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index d00e994..99b6465 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -548,6 +548,9 @@
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
fsl,anatop = <&anatop>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -558,6 +561,9 @@
clocks = <&clks IMX6UL_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -619,6 +625,18 @@
status = "disabled";
};
+ adc1: adc@02198000 {
+ compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ADC1>;
+ num-channels = <2>;
+ clock-names = "adc";
+ fsl,adck-max-frequency = <30000000>, <40000000>,
+ <20000000>;
+ status = "disabled";
+ };
+
i2c1: i2c@021a0000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
new file mode 100644
index 0000000..4863451
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -0,0 +1,286 @@
+/*
+ * Support for CompuLab CL-SOM-iMX7 System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7d.dtsi"
+
+/ {
+ model = "CompuLab CL-SOM-iMX7";
+ compatible = "compulab,cl-som-imx7", "fsl,imx7d";
+
+ memory {
+ reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
+ };
+
+ reg_usb_otg1_vbus: regulator-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic: pmic@8 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ vbus-supply = <®_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ fsl,tuning-step = <2>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
+ MX7D_PAD_SD2_WP__ENET1_MDC 0x3
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1
+ MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1
+ MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1
+ MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1
+ MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1
+ MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1
+ MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1
+ MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1
+ MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1
+ MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1
+ MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1
+ MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
new file mode 100644
index 0000000..d63c597
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
@@ -0,0 +1,42 @@
+/*
+ * Support for CompuLab SBC-iMX7 Single Board Computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ */
+
+#include "imx7d-cl-som-imx7.dts"
+
+/ {
+ model = "CompuLab SBC-iMX7";
+ compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 432aaf5..b2c4536 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -97,6 +97,16 @@
};
};
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&adc2 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
&cpu0 {
arm-supply = <&sw1a_reg>;
};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index ebc053a..25ad309 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -85,9 +85,7 @@
792000 975000
>;
clock-latency = <61036>; /* two CLK32 periods */
- clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>,
- <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>;
- clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main";
+ clocks = <&clks IMX7D_CLK_ARM>;
};
cpu1: cpu@1 {
@@ -583,6 +581,24 @@
reg = <0x30400000 0x400000>;
ranges;
+ adc1: adc@30610000 {
+ compatible = "fsl,imx7d-adc";
+ reg = <0x30610000 0x10000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
+ adc2: adc@30620000 {
+ compatible = "fsl,imx7d-adc";
+ reg = <0x30620000 0x10000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
pwm1: pwm@30660000 {
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
reg = <0x30660000 0x10000>;
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts
new file mode 100644
index 0000000..bc4ec93
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
@@ -0,0 +1,238 @@
+/* Device tree file for the Zyxel NSA 325 NAS box.
+ *
+ * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based upon the board setup file created by Peter Schildmann
+ */
+
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+ model = "ZyXEL NSA325";
+ compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pinctrl-names = "default";
+
+ pmx_led_hdd2_green: pmx-led-hdd2-green {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd2_red: pmx-led-hdd2-red {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_mcu_data: pmx-mcu-data {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_usb_green: pmx-led-usb-green {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ pmx_mcu_clk: pmx-mcu-clk {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_mcu_act: pmx-mcu-act {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_green: pmx-led-sys-green {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_orange: pmx-led-sys-orange {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_green: pmx-led-hdd1-green {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_red: pmx-led-hdd1-red {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ pmx_htp: pmx-htp {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+
+ /*
+ * Buzzer needs to be switched at around 1kHz so is
+ * not compatible with the gpio-beeper driver.
+ */
+ pmx_buzzer: pmx-buzzer {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ pmx_vid_b1: pmx-vid-b1 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_resume_data: pmx-power-resume-data {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_resume_clk: pmx-power-resume-clk {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+
+ pmx_pwr_sata1: pmx-pwr-sata1 {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ };
+
+ /* This board uses the pcf8563 RTC instead of the SoC RTC */
+ rtc@10300 {
+ status = "disabled";
+ };
+
+ i2c@11000 {
+ status = "okay";
+
+ pcf8563: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_pwr_sata1>;
+ pinctrl-names = "default";
+
+ usb0_power: regulator@1 {
+ enable-active-high;
+ };
+
+ sata1_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+ &pmx_led_usb_green
+ &pmx_led_sys_green &pmx_led_sys_orange
+ &pmx_led_copy_green &pmx_led_copy_red
+ &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+ pinctrl-names = "default";
+
+ green-sys {
+ label = "nsa325:green:sys";
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ };
+ orange-sys {
+ label = "nsa325:orange:sys";
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ green-hdd1 {
+ label = "nsa325:green:hdd1";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ };
+ red-hdd1 {
+ label = "nsa325:red:hdd1";
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+ green-hdd2 {
+ label = "nsa325:green:hdd2";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ red-hdd2 {
+ label = "nsa325:red:hdd2";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ green-usb {
+ label = "nsa325:green:usb";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ };
+ green-copy {
+ label = "nsa325:green:copy";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+ red-copy {
+ label = "nsa325:red:copy";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* The following pins are currently not assigned to a driver,
+ some of them should be configured as inputs.
+ pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
+ &pmx_htp &pmx_vid_b1
+ &pmx_power_resume_data &pmx_power_resume_clk>; */
+ };
+
+
+};
+
+&mdio {
+ status = "okay";
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
+
diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
new file mode 100644
index 0000000..1db6f2c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
@@ -0,0 +1,178 @@
+/*
+ * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4
+ * inspired by the board files made by Kevin Mihelich for ArchLinux,
+ * and their DTS file.
+ *
+ * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+ model = "Cloud Engines PogoPlug Series 4";
+ compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ chosen {
+ stdout-path = "uart0:115200n8";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_button_eject>;
+ pinctrl-names = "default";
+
+ button@1 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <KEY_EJECTCD>;
+ label = "Eject Button";
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_green &pmx_led_red>;
+ pinctrl-names = "default";
+
+ health {
+ label = "pogoplugv4:green:health";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ fault {
+ label = "pogoplugv4:red:fault";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp21";
+ marvell,function = "sata0";
+ };
+
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp20";
+ marvell,function = "sata1";
+ };
+
+ pmx_sdio_cd: pmx-sdio-cd {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+
+ pmx_sdio_wp: pmx-sdio-wp {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_button_eject: pmx-button-eject {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_green: pmx-led-green {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_red: pmx-led-red {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/*
+ * This PCIE controller has a USB 3.0 XHCI controller at 1,0
+ */
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ nr-ports = <1>;
+};
+
+&sdio {
+ status = "okay";
+ pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
+ pinctrl-names = "default";
+ cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+};
+
+&nand {
+ /* 128 MiB of NAND flash */
+ chip-delay = <40>;
+ status = "okay";
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x200000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "uImage";
+ reg = <0x00200000 0x300000>;
+ };
+
+ partition@500000 {
+ label = "uImage2";
+ reg = <0x00500000 0x300000>;
+ };
+
+ partition@800000 {
+ label = "failsafe";
+ reg = <0x00800000 0x800000>;
+ };
+
+ partition@1000000 {
+ label = "root";
+ reg = <0x01000000 0x7000000>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 5b04300..fb13f18 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -23,31 +23,37 @@
label = "sysboot2";
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
linux,code = <BTN_0>;
- gpio-key,wakeup;
+ wakeup-source;
};
sysboot5 {
label = "sysboot5";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
linux,code = <BTN_1>;
- gpio-key,wakeup;
+ wakeup-source;
};
gpio1 {
label = "gpio1";
gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
linux,code = <BTN_2>;
- gpio-key,wakeup;
+ wakeup-source;
};
gpio2 {
label = "gpio2";
gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
linux,code = <BTN_3>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3logic";
+ ti,mcbsp = <&mcbsp2>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -67,6 +73,20 @@
};
};
+&vaux1 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+ status = "okay";
+};
+
&charger {
ti,bb-uvolt = <3200000>;
ti,bb-uamp = <150>;
@@ -84,6 +104,70 @@
};
};
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "ok";
+ vdds_dsi-supply = <&vpll2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins1>;
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <16>;
+ };
+ };
+};
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ };
+
+ lcd0: display@0 {
+ compatible = "panel-dpi";
+ label = "15";
+ status = "okay";
+ /* default-on; */
+ pinctrl-names = "default";
+ enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <3>;
+ hback-porch = <2>;
+ hsync-len = <42>;
+ vback-porch = <3>;
+ vfront-porch = <4>;
+ vsync-len = <11>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+ bl: backlight {
+ compatible = "gpio-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+
+ gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>, /* gpio_56 */
+ <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
+ default-on;
+ };
+};
+
&mmc1 {
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
pinctrl-names = "default";
@@ -119,6 +203,48 @@
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
+
+ tsc2004_pins: pinmux_tsc2004_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
+ >;
+ };
+
+ backlight_pins: pinmux_backlight_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs5.gpio_56 */
+ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* mcbsp4_dx.gpio_154 */
+ >;
+ };
+
+ dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */
+ >;
+ };
};
&omap3_pmx_wkup {
@@ -142,6 +268,27 @@
};
};
+&i2c3 {
+ touchscreen: tsc2004@48 {
+ compatible = "ti,tsc2004";
+ reg = <0x48>;
+ vio-supply = <&vaux1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsc2004_pins>;
+ interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
+};
+
&uart1 {
interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 36387b1..7fed0bd 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -96,9 +96,30 @@
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
};
};
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+};
+
/*
* Only found on the wireless SOM. For the SOM without wireless, the pins for
* MMC3 can be routed with jumpers to the second MMC slot on the devkit and
@@ -136,6 +157,29 @@
OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */
>;
};
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */
+ >;
+ };
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */
+ >;
+ };
+};
+
+&uart2 {
+ interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
};
&omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 52591d8..053a1f5 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -166,6 +166,17 @@
status = "disabled";
};
+ eeprom: eeprom@4000e000 {
+ compatible = "nxp,lpc1857-eeprom";
+ reg = <0x4000e000 0x1000>, <0x20040000 0x4000>;
+ reg-names = "reg", "mem";
+ clocks = <&ccu1 CLK_CPU_EEPROM>;
+ clock-names = "eeprom";
+ resets = <&rgu 27>;
+ interrupts = <4>;
+ status = "disabled";
+ };
+
mac: ethernet@40010000 {
compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
reg = <0x40010000 0x2000>;
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 3abebb7..c85cf97 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -11,19 +11,20 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
compatible = "nxp,lpc3220";
interrupt-parent = <&mic>;
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0x0>;
};
};
@@ -31,7 +32,8 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- ranges = <0x20000000 0x20000000 0x30000000>;
+ ranges = <0x20000000 0x20000000 0x30000000>,
+ <0xe0000000 0xe0000000 0x04000000>;
/*
* Enable either SLC or MLC
@@ -49,30 +51,46 @@
status = "disabled";
};
- dma@31000000 {
+ dma: dma@31000000 {
compatible = "arm,pl080", "arm,primecell";
reg = <0x31000000 0x1000>;
interrupts = <0x1c 0>;
};
- /*
- * Enable either ohci or usbd (gadget)!
- */
- ohci@31020000 {
- compatible = "nxp,ohci-nxp", "usb-ohci";
- reg = <0x31020000 0x300>;
- interrupts = <0x3b 0>;
- status = "disabled";
+ usb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x31020000 0x00001000>;
+
+ /*
+ * Enable either ohci or usbd (gadget)!
+ */
+ ohci: ohci@0 {
+ compatible = "nxp,ohci-nxp", "usb-ohci";
+ reg = <0x0 0x300>;
+ interrupts = <0x3b 0>;
+ status = "disabled";
+ };
+
+ usbd: usbd@0 {
+ compatible = "nxp,lpc3220-udc";
+ reg = <0x0 0x300>;
+ interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+ status = "disabled";
+ };
+
+ i2cusb: i2c@300 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x300 0x100>;
+ interrupts = <0x3f 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pnx,timeout = <0x64>;
+ };
};
- usbd@31020000 {
- compatible = "nxp,lpc3220-udc";
- reg = <0x31020000 0x300>;
- interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
- status = "disabled";
- };
-
- clcd@31040000 {
+ clcd: clcd@31040000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0x31040000 0x1000>;
interrupts = <0x0e 0>;
@@ -85,6 +103,19 @@
interrupts = <0x1d 0>;
};
+ emc: memory-controller@31080000 {
+ compatible = "arm,pl175", "arm,primecell";
+ reg = <0x31080000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0 0xe0000000 0x01000000>,
+ <1 0xe1000000 0x01000000>,
+ <2 0xe2000000 0x01000000>,
+ <3 0xe3000000 0x01000000>;
+ status = "disabled";
+ };
+
apb {
#address-cells = <1>;
#size-cells = <1>;
@@ -118,7 +149,7 @@
reg = <0x20094000 0x1000>;
};
- sd@20098000 {
+ sd: sd@20098000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x20098000 0x1000>;
interrupts = <0x0f 0>, <0x0d 0>;
@@ -192,15 +223,6 @@
status = "disabled";
#pwm-cells = <2>;
};
-
- i2cusb: i2c@31020300 {
- compatible = "nxp,pnx-i2c";
- reg = <0x31020300 0x100>;
- interrupts = <0x3f 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- pnx,timeout = <0x64>;
- };
};
fab {
@@ -243,7 +265,7 @@
status = "disabled";
};
- rtc@40024000 {
+ rtc: rtc@40024000 {
compatible = "nxp,lpc3220-rtc";
reg = <0x40024000 0x1000>;
interrupts = <0x34 0>;
@@ -256,11 +278,31 @@
#gpio-cells = <3>; /* bank, pin, flags */
};
- watchdog@4003C000 {
+ timer4: timer@4002C000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x4002C000 0x1000>;
+ interrupts = <0x3 0>;
+ status = "disabled";
+ };
+
+ timer5: timer@40030000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40030000 0x1000>;
+ interrupts = <0x4 0>;
+ status = "disabled";
+ };
+
+ watchdog: watchdog@4003C000 {
compatible = "nxp,pnx4008-wdt";
reg = <0x4003C000 0x1000>;
};
+ timer0: timer@40044000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40044000 0x1000>;
+ interrupts = <0x10 0>;
+ };
+
/*
* TSC vs. ADC: Since those two share the same
* hardware, you need to choose from one of the
@@ -268,30 +310,56 @@
* them
*/
- adc@40048000 {
+ adc: adc@40048000 {
compatible = "nxp,lpc3220-adc";
reg = <0x40048000 0x1000>;
interrupts = <0x27 0>;
status = "disabled";
};
- tsc@40048000 {
+ tsc: tsc@40048000 {
compatible = "nxp,lpc3220-tsc";
reg = <0x40048000 0x1000>;
interrupts = <0x27 0>;
status = "disabled";
};
- key@40050000 {
+ timer1: timer@4004C000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x4004C000 0x1000>;
+ interrupts = <0x11 0>;
+ };
+
+ key: key@40050000 {
compatible = "nxp,lpc3220-key";
reg = <0x40050000 0x1000>;
interrupts = <54 0>;
status = "disabled";
};
- pwm: pwm@4005C000 {
+ timer2: timer@40058000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40058000 0x1000>;
+ interrupts = <0x12 0>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@4005C000 {
compatible = "nxp,lpc3220-pwm";
- reg = <0x4005C000 0x8>;
+ reg = <0x4005C000 0x4>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@4005C004 {
+ compatible = "nxp,lpc3220-pwm";
+ reg = <0x4005C004 0x4>;
+ status = "disabled";
+ };
+
+ timer3: timer@40060000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40060000 0x1000>;
+ interrupts = <0x13 0>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts
index 5f500c1..5cfadb0 100644
--- a/arch/arm/boot/dts/lpc4337-ciaa.dts
+++ b/arch/arm/boot/dts/lpc4337-ciaa.dts
@@ -99,6 +99,14 @@
};
};
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
ssp_pins: ssp-pins {
ssp1_cs {
pins = "p6_7";
@@ -159,6 +167,28 @@
clock-frequency = <50000000>;
};
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ eeprom@50 {
+ compatible = "microchip,24c512";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "microchip,24c02";
+ reg = <0x51>;
+ };
+
+ eeprom@54 {
+ compatible = "microchip,24c512";
+ reg = <0x54>;
+ };
+};
+
&mac {
status = "okay";
phy-mode = "rmii";
@@ -166,6 +196,10 @@
pinctrl-0 = <&enet_rmii_pins>;
};
+&sct_pwm {
+ status = "okay";
+};
+
&ssp1 {
status = "okay";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
index 391121d..079d3cf 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -467,6 +467,11 @@
pinctrl-0 = <&i2c0_pins>;
clock-frequency = <400000>;
+ mma7455@1d {
+ compatible = "fsl,mma7455";
+ reg = <0x1d>;
+ };
+
lm75@48 {
compatible = "nxp,lm75";
reg = <0x48>;
diff --git a/arch/arm/boot/dts/lpc4357.dtsi b/arch/arm/boot/dts/lpc4357.dtsi
index fb9ecc7..72f12db 100644
--- a/arch/arm/boot/dts/lpc4357.dtsi
+++ b/arch/arm/boot/dts/lpc4357.dtsi
@@ -37,3 +37,7 @@
};
};
};
+
+&eeprom {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 0521e68..9408753 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -320,6 +320,10 @@
status = "okay";
};
+&sata {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index fbb89d1..75ecaed 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -105,6 +105,15 @@
bitclock-master;
};
};
+
+ panel: panel {
+ compatible = "nec,nl4827hc19-05b";
+ };
+};
+
+&dcu {
+ fsl,panel = <&panel>;
+ status = "okay";
};
&dspi1 {
@@ -212,6 +221,10 @@
status = "okay";
};
+&sata {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 9430a99..2c84ca2 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -143,6 +143,17 @@
status = "disabled";
};
+ sata: sata@3200000 {
+ compatible = "fsl,ls1021a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x0 0x20220520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ dma-coherent;
+ status = "disabled";
+ };
+
scfg: scfg@1570000 {
compatible = "fsl,ls1021a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
@@ -428,6 +439,16 @@
<&platform_clk 1>;
};
+ dcu: dcu@2ce0000 {
+ compatible = "fsl,ls1021a-dcu";
+ reg = <0x0 0x2ce0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 0>;
+ clock-names = "dcu";
+ big-endian;
+ status = "disabled";
+ };
+
mdio0: mdio@2d24000 {
compatible = "gianfar";
device_type = "mdio";
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
new file mode 100644
index 0000000..082ca88
--- /dev/null
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Erin Lo <erin.lo@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt2701.dtsi"
+
+/ {
+ model = "MediaTek MT2701 evaluation board";
+ compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
+
+ memory {
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
new file mode 100644
index 0000000..3766904
--- /dev/null
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -0,0 +1,146 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Erin.Lo <erin.lo@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton64.dtsi"
+
+/ {
+ compatible = "mediatek,mt2701";
+ interrupt-parent = <&sysirq>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ };
+ };
+
+ system_clk: dummy13m {
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ #clock-cells = <0>;
+ };
+
+ rtc_clk: dummy32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt2701-wdt",
+ "mediatek,mt6589-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ };
+
+ timer: timer@10008000 {
+ compatible = "mediatek,mt2701-timer",
+ "mediatek,mt6577-timer";
+ reg = <0 0x10008000 0 0x80>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&system_clk>, <&rtc_clk>;
+ clock-names = "system-clk", "rtc-clk";
+ };
+
+ sysirq: interrupt-controller@10200100 {
+ compatible = "mediatek,mt2701-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200100 0 0x1c>;
+ };
+
+ gic: interrupt-controller@10211000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10211000 0 0x1000>,
+ <0 0x10212000 0 0x1000>,
+ <0 0x10214000 0 0x2000>,
+ <0 0x10216000 0 0x2000>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt2701-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt2701-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt2701-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt2701-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index cb99b02..1d7f92b 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -15,7 +15,7 @@
#include <dt-bindings/clock/mt8135-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset-controller/mt8135-resets.h>
+#include <dt-bindings/reset/mt8135-resets.h>
#include "skeleton64.dtsi"
#include "mt8135-pinfunc.h"
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 73f1e3a..01e1e2d 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -69,7 +69,7 @@
label = "user";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
linux,code = <0x114>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
@@ -176,18 +176,18 @@
&omap3_pmx_wkup {
gpio1_pins: pinmux_gpio1_pins {
pinctrl-single,pins = <
- 0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
+ OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
>;
};
dss_dpi_pins2: pinmux_dss_dpi_pins1 {
pinctrl-single,pins = <
- 0x0a (PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
- 0x0c (PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
- 0x10 (PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
- 0x12 (PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
- 0x14 (PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
- 0x16 (PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
+ OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
+ OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
+ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
>;
};
};
@@ -200,8 +200,8 @@
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
>;
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 274c2c4..8ba465d 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -80,7 +80,7 @@
label = "user";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
linux,code = <0x114>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
@@ -171,7 +171,7 @@
&omap3_pmx_wkup {
gpio1_pins: pinmux_gpio1_pins {
pinctrl-single,pins = <
- 0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
>;
};
};
@@ -195,47 +195,47 @@
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
tfp410_pins: pinmux_tfp410_pins {
pinctrl-single,pins = <
- 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
>;
};
dss_dpi_pins: pinmux_dss_dpi_pins {
pinctrl-single,pins = <
- 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
- 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
- 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
- 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
- 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
- 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
- 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
- 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
- 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
- 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
- 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
- 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
- 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
- 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
- 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
- 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
- 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
- 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
- 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
- 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
- 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
- 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
- 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
- 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
- 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
- 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
- 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
- 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index 8c813e7..e5f7f5c 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -238,7 +238,7 @@
ti,debounce-tol = /bits/ 16 <10>;
ti,debounce-rep = /bits/ 16 <1>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 9ca2865a..86850bb 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -64,7 +64,7 @@
label = "user";
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_EXTRA>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index 4813e96..738910d 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -68,6 +68,6 @@
ti,keep-vref-on = <1>;
ti,settle-delay-usec = /bits/ 16 <150>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index bb339d1..ac18865 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -66,48 +66,48 @@
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- 0x120 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
- 0x122 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
- 0x124 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
- 0x126 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
+ OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
+ OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
+ OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
+ OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
>;
};
/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
- 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
- 0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
- 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0x150 (PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */
- 0x14e (PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */
>;
};
smsc911x_pins: pinmux_smsc911x_pins {
pinctrl-single,pins = <
- 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
+ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
>;
};
};
@@ -115,12 +115,12 @@
&omap3_pmx_wkup {
dss_dpi_pins2: pinmux_dss_dpi_pins1 {
pinctrl-single,pins = <
- 0x0a (PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
- 0x0c (PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
- 0x10 (PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
- 0x12 (PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
- 0x14 (PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
- 0x16 (PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
+ OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
+ OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
+ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index e14d15e..5e2d643 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -37,7 +37,7 @@
label = "aux";
linux,code = <169>;
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 3835e15..33d6b4e 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -15,25 +15,17 @@
model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
- /* Regulator to trigger the WIFI_PDN signal of the Wifi module */
- lbee1usjyc_pdn: lbee1usjyc_pdn {
+ vmmcsdio_fixed: fixedregulator-mmcsdio {
compatible = "regulator-fixed";
- regulator-name = "regulator-lbee1usjyc-pdn";
+ regulator-name = "vmmcsdio_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */
- startup-delay-us = <10000>;
- enable-active-high;
};
- /* Regulator to trigger the RESET_N_W signal of the Wifi module */
- lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
- compatible = "regulator-fixed";
- regulator-name = "regulator-lbee1usjyc-reset-n-w";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */
- enable-active-high;
+ mmc2_pwrseq: mmc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */
+ <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */
};
};
@@ -51,8 +43,8 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
- vmmc-supply = <&lbee1usjyc_pdn>;
- vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+ vmmc-supply = <&vmmcsdio_fixed>;
+ mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <4>;
non-removable;
};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 468608da..55b0cc4 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -15,25 +15,17 @@
model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
- /* Regulator to trigger the WIFI_PDN signal of the Wifi module */
- lbee1usjyc_pdn: lbee1usjyc_pdn {
+ vmmcsdio_fixed: fixedregulator-mmcsdio {
compatible = "regulator-fixed";
- regulator-name = "regulator-lbee1usjyc-pdn";
+ regulator-name = "vmmcsdio_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */
- startup-delay-us = <10000>;
- enable-active-high;
};
- /* Regulator to trigger the RESET_N_W signal of the Wifi module */
- lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
- compatible = "regulator-fixed";
- regulator-name = "regulator-lbee1usjyc-reset-n-w";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */
- enable-active-high;
+ mmc2_pwrseq: mmc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */
+ <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */
};
};
@@ -62,8 +54,8 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
- vmmc-supply = <&lbee1usjyc_pdn>;
- vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+ vmmc-supply = <&vmmcsdio_fixed>;
+ mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <4>;
non-removable;
};
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index d2fab8c..5401630 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -35,63 +35,63 @@
label = "enter";
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
linux,code = <KEY_ENTER>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_f1 {
label = "f1";
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
linux,code = <KEY_F1>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_f2 {
label = "f2";
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
linux,code = <KEY_F2>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_f3 {
label = "f3";
gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
linux,code = <KEY_F3>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_f4 {
label = "f4";
gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
linux,code = <KEY_F4>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_left {
label = "left";
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
linux,code = <KEY_LEFT>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_right {
label = "right";
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
linux,code = <KEY_RIGHT>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_up {
label = "up";
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
linux,code = <KEY_UP>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_down {
label = "down";
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
linux,code = <KEY_DOWN>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
@@ -224,32 +224,32 @@
&omap3_pmx_core {
gpio_key_pins: pinmux_gpio_key_pins {
pinctrl-single,pins = <
- 0xea (PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */
- 0xec (PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */
- 0xee (PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */
- 0xf0 (PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */
- 0xf2 (PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */
- 0xf4 (PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */
- 0xf6 (PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */
- 0xf8 (PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */
- 0xfa (PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */
>;
};
musb_pins: pinmux_musb_pins {
pinctrl-single,pins = <
- 0x172 (PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
- 0x17a (PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
- 0x17c (PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
- 0x17e (PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
- 0x180 (PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
- 0x182 (PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
- 0x184 (PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
- 0x186 (PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
- 0x188 (PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
- 0x176 (PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
- 0x178 (PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
- 0x174 (PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
>;
};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 57d7c93..93f8dfe 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -327,7 +327,7 @@
ti,pressure-max = /bits/ 16 <255>;
ti,swap-xy;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 5f5e0f3..74d8f7eb 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -67,28 +67,28 @@
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
linux,input-type = <5>; /* EV_SW */
linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
- gpio-key,wakeup;
+ wakeup-source;
};
camera_focus {
label = "Camera Focus";
gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
- gpio-key,wakeup;
+ wakeup-source;
};
camera_capture {
label = "Camera Capture";
gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
linux,code = <0xd4>; /* KEY_CAMERA */
- gpio-key,wakeup;
+ wakeup-source;
};
lock_button {
label = "Lock Button";
gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
linux,code = <0x98>; /* KEY_SCREENLOCK */
- gpio-key,wakeup;
+ wakeup-source;
};
keypad_slide {
@@ -96,7 +96,7 @@
gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
linux,input-type = <5>; /* EV_SW */
linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
- gpio-key,wakeup;
+ wakeup-source;
};
proximity_sensor {
@@ -149,15 +149,15 @@
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx */
- 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx */
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */
>;
};
@@ -198,22 +198,22 @@
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
- 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
- 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
- 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
>;
};
@@ -225,85 +225,85 @@
mcspi4_pins: pinmux_mcspi4_pins {
pinctrl-single,pins = <
- 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
- 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
- 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
- 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+ OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
- 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */
- 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
- 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
- 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
- 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
- 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
- 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
- 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
- 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
- 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
- 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
>;
};
acx565akm_pins: pinmux_acx565akm_pins {
pinctrl-single,pins = <
- 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
>;
};
dss_sdi_pins: pinmux_dss_sdi_pins {
pinctrl-single,pins = <
- 0x0c0 (PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */
- 0x0c2 (PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */
- 0x0c4 (PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */
- 0x0c6 (PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */
- 0x0d8 (PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */
- 0x0da (PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */
>;
};
wl1251_pins: pinmux_wl1251 {
pinctrl-single,pins = <
- 0x0ce (PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */
- 0x05a (PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */
+ OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */
>;
};
ssi_pins: pinmux_ssi {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
- 0x14e (PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
- 0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
- 0x14c (PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
- 0x154 (PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
- 0x156 (PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
- 0x158 (PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
- 0x15a (PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
+ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
+ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
>;
};
modem_pins: pinmux_modem {
pinctrl-single,pins = <
- 0x0ac (PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
- 0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
- 0x0b2 (PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
- 0x0b4 (PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
- 0x0b6 (PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */
- 0x15e (PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */
>;
};
};
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index e9ee1df..a2c2b8d 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -36,12 +36,12 @@
&omap3_pmx_core {
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
- 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
- 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
- 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
index 7aae8fb..3b3a759 100644
--- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -48,7 +48,7 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio_10 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
index 17b82f8..7df2792 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -41,13 +41,13 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
- gpio-key,wakeup;
+ wakeup-source;
};
button1@14 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index b09cedf..6314da2 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -161,6 +161,6 @@
ti,x-plate-ohms = /bits/ 16 <180>;
ti,pressure-max = /bits/ 16 <255>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 5f97959..7e3fe85 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -172,7 +172,7 @@
ti,x-plate-ohms = /bits/ 16 <180>;
ti,pressure-max = /bits/ 16 <255>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
index 49d2254..250cc7f 100644
--- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -41,13 +41,13 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
- gpio-key,wakeup;
+ wakeup-source;
};
button1@14 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
index 680d726..8df7ec3 100644
--- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
@@ -41,13 +41,13 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
- gpio-key,wakeup;
+ wakeup-source;
};
button1@14 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
index 087aedf..0ea2c45 100644
--- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -41,13 +41,13 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
- gpio-key,wakeup;
+ wakeup-source;
};
button1@14 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index cfe140c..13e9d1f 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -84,112 +84,112 @@
label = "up";
linux,code = <KEY_UP>;
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */
- gpio-key,wakeup;
+ wakeup-source;
};
down-button {
label = "down";
linux,code = <KEY_DOWN>;
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */
- gpio-key,wakeup;
+ wakeup-source;
};
left-button {
label = "left";
linux,code = <KEY_LEFT>;
gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */
- gpio-key,wakeup;
+ wakeup-source;
};
right-button {
label = "right";
linux,code = <KEY_RIGHT>;
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */
- gpio-key,wakeup;
+ wakeup-source;
};
pageup-button {
label = "game 1";
linux,code = <KEY_PAGEUP>;
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */
- gpio-key,wakeup;
+ wakeup-source;
};
pagedown-button {
label = "game 3";
linux,code = <KEY_PAGEDOWN>;
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */
- gpio-key,wakeup;
+ wakeup-source;
};
home-button {
label = "game 4";
linux,code = <KEY_HOME>;
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */
- gpio-key,wakeup;
+ wakeup-source;
};
end-button {
label = "game 2";
linux,code = <KEY_END>;
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */
- gpio-key,wakeup;
+ wakeup-source;
};
right-shift {
label = "l";
linux,code = <KEY_RIGHTSHIFT>;
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */
- gpio-key,wakeup;
+ wakeup-source;
};
kp-plus {
label = "l2";
linux,code = <KEY_KPPLUS>;
gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */
- gpio-key,wakeup;
+ wakeup-source;
};
right-ctrl {
label = "r";
linux,code = <KEY_RIGHTCTRL>;
gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */
- gpio-key,wakeup;
+ wakeup-source;
};
kp-minus {
label = "r2";
linux,code = <KEY_KPMINUS>;
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */
- gpio-key,wakeup;
+ wakeup-source;
};
left-ctrl {
label = "ctrl";
linux,code = <KEY_LEFTCTRL>;
gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */
- gpio-key,wakeup;
+ wakeup-source;
};
menu {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */
- gpio-key,wakeup;
+ wakeup-source;
};
hold {
label = "hold";
linux,code = <KEY_COFFEE>;
gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */
- gpio-key,wakeup;
+ wakeup-source;
};
left-alt {
label = "alt";
linux,code = <KEY_LEFTALT>;
gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */
- gpio-key,wakeup;
+ wakeup-source;
};
lid {
@@ -617,7 +617,7 @@
ti,x-plate-ohms = /bits/ 16 <40>;
ti,pressure-max = /bits/ 16 <255>;
- linux,wakeup;
+ wakeup-source;
};
lcd: lcd@1 {
diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
index f4b1a61..157345b 100644
--- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
+++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -66,6 +66,6 @@
ti,x-plate-ohms = /bits/ 16 <40>;
ti,pressure-max = /bits/ 16 <255>;
ti,swap-xy;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 7bc5fdd..f19170b 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -54,27 +54,27 @@
/* REVISIT: twl gpio0 is mmc0_cd */
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- 0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
- 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
- 0x12c (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
- 0x12e (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
- 0x130 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
- 0x132 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
- 0x134 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */
- 0x136 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */
- 0x138 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */
- 0x13a (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */
>;
};
@@ -87,35 +87,35 @@
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
- 0x14e (PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
- 0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
- 0x14c (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
+ OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x144 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
- 0x146 (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
- 0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
- 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ OMAP3_CORE1_IOPAD(0x217a, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
- 0x16c (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
- 0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
+ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
+ OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
/* wl12xx GPIO output for WLAN_EN */
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0xea (PIN_OUTPUT| MUX_MODE4) /* cam_d2.gpio_101 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4) /* cam_d2.gpio_101 */
>;
};
};
@@ -135,7 +135,7 @@
&omap3_pmx_wkup {
wlan_host_wkup: pinmux_wlan_host_wkup_pins {
pinctrl-single,pins = <
- 0x1a (PIN_INPUT_PULLUP | MUX_MODE4) /* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
+ OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
>;
};
};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 8a2b253..d1ffabb 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -717,6 +717,8 @@
ti,hwmods = "gpmc";
reg = <0x6e000000 0x02d0>;
interrupts = <20>;
+ dmas = <&sdma 4>;
+ dma-names = "rxtx";
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index 1a78f01..ab17b99 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -36,7 +36,7 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts
index 133f1b7..78d3631 100644
--- a/arch/arm/boot/dts/omap4-panda-a4.dts
+++ b/arch/arm/boot/dts/omap4-panda-a4.dts
@@ -13,8 +13,8 @@
/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
- 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 18d0966..df2e356 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -199,129 +199,129 @@
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
- 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
- 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
+ OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
+ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
- 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
- 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
- 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
- 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
- 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
+ OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
+ OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
+ OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
+ OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
+ OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
- 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
- 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
- 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
- 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+ OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
>;
};
dss_dpi_pins: pinmux_dss_dpi_pins {
pinctrl-single,pins = <
- 0x122 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */
- 0x124 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */
- 0x126 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */
- 0x128 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */
- 0x12a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */
- 0x12c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */
- 0x12e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */
- 0x130 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */
- 0x132 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */
- 0x134 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */
- 0x136 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */
+ OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */
+ OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */
+ OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */
+ OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */
+ OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */
+ OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */
+ OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */
+ OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */
+ OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */
+ OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */
+ OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */
- 0x174 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */
- 0x176 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */
- 0x178 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */
- 0x17a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */
- 0x17c (PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */
- 0x17e (PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */
- 0x180 (PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */
- 0x182 (PIN_OUTPUT | MUX_MODE5) /* dispc2_de */
- 0x184 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */
- 0x186 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */
- 0x188 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */
- 0x18a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */
- 0x18c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */
- 0x18e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */
+ OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */
+ OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */
+ OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */
+ OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */
+ OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */
+ OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */
+ OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */
+ OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */
+ OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */
+ OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */
+ OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */
+ OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */
+ OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */
+ OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */
- 0x190 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */
- 0x192 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */
- 0x194 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */
+ OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */
+ OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */
+ OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */
>;
};
tfp410_pins: pinmux_tfp410_pins {
pinctrl-single,pins = <
- 0x144 (PIN_OUTPUT | MUX_MODE3) /* gpio_0 */
+ OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3) /* gpio_0 */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
- 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
- 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
- 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
+ OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
>;
};
hsusbb1_pins: pinmux_hsusbb1_pins {
pinctrl-single,pins = <
- 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
- 0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
- 0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
- 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
- 0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
- 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
- 0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
- 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
- 0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
- 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
- 0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
- 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+ OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+ OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+ OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+ OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+ OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+ OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+ OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+ OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+ OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+ OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+ OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+ OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
- 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
- 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
- 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
- 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
- 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
@@ -331,24 +331,24 @@
*/
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
- 0x2c (PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */
- 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */
- 0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */
+ OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
+ OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */
+ OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */
+ OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */
>;
};
/* wl12xx GPIO inputs and SDIO pins */
wl12xx_pins: pinmux_wl12xx_pins {
pinctrl-single,pins = <
- 0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
- 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
- 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
- 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
- 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
- 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
- 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
+ OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
+ OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
+ OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
+ OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
+ OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
+ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
};
@@ -356,8 +356,8 @@
&omap4_pmx_wkup {
led_wkgpio_pins: pinmux_leds_wkpins {
pinctrl-single,pins = <
- 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
- 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
+ OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 2f1dabc..119f8e6 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -34,23 +34,23 @@
/* PandaboardES has external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
- 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
&omap4_pmx_core {
led_gpio_pins: gpio_led_pmx {
pinctrl-single,pins = <
- 0xb6 (PIN_OUTPUT | MUX_MODE3) /* gpio_110 */
+ OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */
>;
};
};
&led_wkgpio_pins {
pinctrl-single,pins = <
- 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
>;
};
diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
index aad5dda..b4d19a7 100644
--- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts
+++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
@@ -10,8 +10,8 @@
/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
- 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index f0bdc41..aae5132 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -212,143 +212,143 @@
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
- 0xda (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
- 0xdc (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
- 0xde (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
- 0x102 (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
- 0x104 (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- 0x106 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
+ OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
uart4_pins: pinmux_uart4_pins {
pinctrl-single,pins = <
- 0x11c (PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
- 0x11e (PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
+ OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
+ OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
>;
};
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
- 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
- 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
+ OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
+ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
- 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
- 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
- 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
- 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
- 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
+ OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
+ OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
+ OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
+ OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
+ OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
>;
};
dmic_pins: pinmux_dmic_pins {
pinctrl-single,pins = <
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
- 0xd2 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
- 0xd4 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
- 0xd6 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
+ OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
+ OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
+ OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
+ OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
- 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
- 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
- 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
- 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+ OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
- 0xb6 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
- 0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
- 0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
- 0xbc (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
+ OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+ OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
+ OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
+ OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
>;
};
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
- 0xf2 (PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
- 0xf4 (PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
- 0xf6 (PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
- 0xf8 (PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
- 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
- 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
- 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
+ OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
- 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
- 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
- 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
- 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
- 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
/* wl12xx GPIO output for WLAN_EN */
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0x3c (PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
+ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
>;
};
/* wl12xx GPIO inputs and SDIO pins */
wl12xx_pins: pinmux_wl12xx_pins {
pinctrl-single,pins = <
- 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
- 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
- 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
- 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
- 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
- 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
+ OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
+ OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
+ OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
+ OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
+ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
index f2d2fdb..6e278d7 100644
--- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
+++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
@@ -41,7 +41,7 @@
label = "user";
gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */
linux,code = <BTN_EXTRA>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 5a206c1..2bd9c83 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -348,12 +348,22 @@
#interrupt-cells = <2>;
};
+ elm: elm@48078000 {
+ compatible = "ti,am3352-elm";
+ reg = <0x48078000 0x2000>;
+ interrupts = <4>;
+ ti,hwmods = "elm";
+ status = "disabled";
+ };
+
gpmc: gpmc@50000000 {
compatible = "ti,omap4430-gpmc";
reg = <0x50000000 0x1000>;
#address-cells = <2>;
#size-cells = <1>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 4>;
+ dma-names = "rxtx";
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
ti,hwmods = "gpmc";
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 5cf76a1..888412c 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -139,60 +139,60 @@
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
- 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
+ OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
- 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
- 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
- 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
- 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
- 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
+ OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
+ OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
+ OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
+ OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
+ OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
- 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
- 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
- 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
- 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
+ OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
+ OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
+ OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
+ OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
- 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
- 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
- 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
- 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
+ OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
+ OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
+ OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
+ OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
- 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
mcspi2_pins: pinmux_mcspi2_pins {
pinctrl-single,pins = <
- 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
- 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
- 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
- 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */
+ OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
+ OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
+ OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
+ OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */
>;
};
mcspi3_pins: pinmux_mcspi3_pins {
pinctrl-single,pins = <
- 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */
- 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */
- 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */
- 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */
+ OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1) /* mcspi3_somi */
+ OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */
+ OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1) /* mcspi3_simo */
+ OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1) /* mcspi3_clk */
>;
};
@@ -215,59 +215,59 @@
usbhost_pins: pinmux_usbhost_pins {
pinctrl-single,pins = <
- 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
- 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+ OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+ OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
- 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
- 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+ OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+ OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
- 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
- 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+ OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+ OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
>;
};
led_gpio_pins: pinmux_led_gpio_pins {
pinctrl-single,pins = <
- 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
+ OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
- 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
- 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
- 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+ OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+ OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+ OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+ OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
- 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+ OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+ OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
>;
};
uart5_pins: pinmux_uart5_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
- 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
- 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
- 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+ OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+ OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+ OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+ OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
- 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
+ OMAP5_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
+ OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
+ OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
>;
};
};
@@ -280,13 +280,13 @@
usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
pinctrl-single,pins = <
- 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
+ OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
>;
};
wlcore_irq_pin: pinmux_wlcore_irq_pin {
pinctrl-single,pins = <
- OMAP5_IOPAD(0x040, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
+ OMAP5_IOPAD(0x40, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index 3774b37..ecc591d 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -175,7 +175,7 @@
ads7846_pins: pinmux_ads7846_pins {
pinctrl-single,pins = <
- 0x02 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */
+ OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */
>;
};
};
@@ -359,7 +359,7 @@
ti,debounce-tol = /bits/ 16 <10>;
ti,debounce-rep = /bits/ 16 <1>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 05b1c1e..60b3fbb 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -40,8 +40,8 @@
&omap5_pmx_core {
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
- 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
- 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
+ OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0) /* i2c5_scl */
+ OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0) /* i2c5_sda */
>;
};
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 4c04389..ca3c17f 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -391,6 +391,8 @@
#address-cells = <2>;
#size-cells = <1>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 4>;
+ dma-names = "rxtx";
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
ti,hwmods = "gpmc";
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
index 90fdbd7..7d253bb 100644
--- a/arch/arm/boot/dts/phy3250.dts
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -12,7 +12,7 @@
*/
/dts-v1/;
-/include/ "lpc32xx.dtsi"
+#include "lpc32xx.dtsi"
/ {
model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
@@ -22,7 +22,7 @@
memory {
device_type = "memory";
- reg = <0 0x4000000>;
+ reg = <0x80000000 0x4000000>;
};
ahb {
@@ -31,19 +31,6 @@
use-iram;
};
- /* Here, choose exactly one from: ohci, usbd */
- ohci@31020000 {
- transceiver = <&isp1301>;
- status = "okay";
- };
-
-/*
- usbd@31020000 {
- transceiver = <&isp1301>;
- status = "okay";
- };
-*/
-
clcd@31040000 {
status = "okay";
};
@@ -123,15 +110,6 @@
clock-frequency = <100000>;
};
- i2cusb: i2c@31020300 {
- clock-frequency = <100000>;
-
- isp1301: usb-transceiver@2c {
- compatible = "nxp,isp1301";
- reg = <0x2c>;
- };
- };
-
ssp0: ssp@20084000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -200,3 +178,18 @@
};
};
};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+ transceiver = <&isp1301>;
+ status = "okay";
+};
+
+&i2cusb {
+ clock-frequency = <100000>;
+
+ isp1301: usb-transceiver@2c {
+ compatible = "nxp,isp1301";
+ reg = <0x2c>;
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 03784f1..21095da 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -54,7 +54,7 @@
/* Buck SMPS */
- pm8921_s1: s1 {
+ s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -62,43 +62,43 @@
bias-pull-down;
};
- pm8921_s3: s3 {
+ s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
- pm8921_s4: s4 {
+ s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
- pm8921_s7: s7 {
+ s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- pm8921_l3: l3 {
+ l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- pm8921_l4: l4 {
+ l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- pm8921_l5: l5 {
+ l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- pm8921_l23: l23 {
+ l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 11ac608..aa9303b 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -64,7 +64,7 @@
/* Buck SMPS */
- pm8921_s1: s1 {
+ s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -72,55 +72,55 @@
bias-pull-down;
};
- pm8921_s3: s3 {
+ s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
- pm8921_s4: s4 {
+ s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
- pm8921_s7: s7 {
+ s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- pm8921_l3: l3 {
+ l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- pm8921_l4: l4 {
+ l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- pm8921_l5: l5 {
+ l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- pm8921_l6: l6 {
+ l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- pm8921_l23: l23 {
+ l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
- pm8921_lvs1: lvs1 {
+ lvs1 {
bias-pull-down;
};
};
@@ -164,7 +164,7 @@
gsbi@16500000 {
status = "ok";
- qcom,mode = <GSBI_PROT_I2C_UART>;
+ qcom,mode = <GSBI_PROT_UART_W_FC>;
serial@16540000 {
status = "ok";
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
new file mode 100644
index 0000000..06b3c76
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -0,0 +1,436 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ model = "Sony Xperia Z";
+ compatible = "sony,xperia-yuga", "qcom,apq8064";
+
+ aliases {
+ serial0 = &gsbi5_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ soc {
+ pinctrl@800000 {
+ gsbi5_uart_pin_a: gsbi5-uart-pin-active {
+ rx {
+ pins = "gpio52";
+ function = "gsbi5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tx {
+ pins = "gpio51";
+ function = "gsbi5";
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ sdcc1_pin_a: sdcc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strengh = <16>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ drive-strengh = <10>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc1_data";
+ drive-strengh = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdcc3_pin_a: sdcc3-pin-active {
+ clk {
+ pins = "sdc3_clk";
+ drive-strengh = <8>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc3_cmd";
+ drive-strengh = <8>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc3_data";
+ drive-strengh = <8>;
+ bias-pull-up;
+ };
+ };
+
+ sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+ pins = "gpio26";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+
+ rpm@108000 {
+ regulators {
+ vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vin_lvs_1_3_6-supply = <&pm8921_s4>;
+ vin_lvs_4_5_7-supply = <&pm8921_s4>;
+ vin_ncp-supply = <&pm8921_l6>;
+ vin_lvs2-supply = <&pm8921_s4>;
+ vin_l24-supply = <&pm8921_s1>;
+ vin_l25-supply = <&pm8921_s1>;
+ vin_l27-supply = <&pm8921_s7>;
+ vin_l28-supply = <&pm8921_s7>;
+
+ /* Buck SMPS */
+ s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <4800000>;
+ bias-pull-down;
+ };
+
+ s4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+
+ s7 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ s8 {
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+
+ /* PMOS LDO */
+ l1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ bias-pull-down;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ l3 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ bias-pull-down;
+ };
+
+ l4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ l5 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l8 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ bias-pull-down;
+ };
+
+ l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ l10 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ bias-pull-down;
+ };
+
+ l11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ bias-pull-down;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ bias-pull-down;
+ };
+
+ l18 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ l21 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ l22 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <2600000>;
+ bias-pull-down;
+ };
+
+ l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ l24 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ l25 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ bias-pull-down;
+ };
+
+ l27 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ l28 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ l29 {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ lvs1 {
+ bias-pull-down;
+ };
+
+ lvs2 {
+ bias-pull-down;
+ };
+
+ lvs3 {
+ bias-pull-down;
+ };
+
+ lvs4 {
+ bias-pull-down;
+ };
+
+ lvs5 {
+ bias-pull-down;
+ };
+
+ lvs6 {
+ bias-pull-down;
+ };
+
+ lvs7 {
+ bias-pull-down;
+ };
+
+ usb-switch {};
+
+ hdmi-switch {};
+
+ ncp {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+ };
+ };
+
+ qcom,ssbi@500000 {
+ pmic@0 {
+ gpio@150 {
+ gpio_keys_pin_a: gpio-keys-pin-active {
+ pins = "gpio3", "gpio4", "gpio29", "gpio35";
+ function = "normal";
+
+ bias-pull-up;
+ drive-push-pull;
+ input-enable;
+ power-source = <2>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ qcom,pull-up-strength = <0>;
+ };
+ };
+ };
+ };
+
+ phy@12500000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+
+ gadget@12500000 {
+ status = "okay";
+ };
+
+ gsbi@1a200000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+
+ serial@1a240000 {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi5_uart_pin_a>;
+ };
+ };
+
+ amba {
+ sdcc1: sdcc@12400000 {
+ status = "okay";
+
+ vmmc-supply = <&pm8921_l5>;
+ vqmmc-supply = <&pm8921_s4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdcc1_pin_a>;
+ };
+
+ sdcc3: sdcc@12180000 {
+ status = "okay";
+
+ vmmc-supply = <&pm8921_l6>;
+ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index a4c1762..edfc6ee5 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -11,6 +11,17 @@
compatible = "qcom,apq8064";
interrupt-parent = <&intc>;
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smem_region: smem@80000000 {
+ reg = <0x80000000 0x200000>;
+ no-map;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -80,6 +91,39 @@
interrupts = <1 10 0x304>;
};
+ clocks {
+ cxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ pxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+
+ sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ sfpb_mutex: hwmutex {
+ compatible = "qcom,sfpb-mutex";
+ syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
+ #hwlock-cells = <1>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_region>;
+
+ hwlocks = <&sfpb_mutex 3>;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -156,6 +200,11 @@
};
};
+ sfpb_wrapper_mutex: syscon@1200000 {
+ compatible = "syscon";
+ reg = <0x01200000 0x8000>;
+ };
+
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
@@ -291,6 +340,28 @@
};
};
+ gsbi5: gsbi@1a200000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <5>;
+ reg = <0x1a200000 0x03>;
+ clocks = <&gcc GSBI5_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gsbi5_serial: serial@1a240000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x1a240000 0x100>,
+ <0x1a200000 0x03>;
+ interrupts = <0 154 0x0>;
+ clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+ };
+
gsbi6: gsbi@16500000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
@@ -336,6 +407,13 @@
};
};
+ rng@1a500000 {
+ compatible = "qcom,prng";
+ reg = <0x1a500000 0x200>;
+ clocks = <&gcc PRNG_CLK>;
+ clock-names = "core";
+ };
+
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
@@ -352,7 +430,8 @@
pm8921_gpio: gpio@150 {
- compatible = "qcom,pm8921-gpio";
+ compatible = "qcom,pm8921-gpio",
+ "qcom,ssbi-gpio";
reg = <0x150>;
interrupts = <192 1>, <193 1>, <194 1>,
<195 1>, <196 1>, <197 1>,
@@ -376,7 +455,8 @@
};
pm8921_mpps: mpps@50 {
- compatible = "qcom,pm8921-mpp";
+ compatible = "qcom,pm8921-mpp",
+ "qcom,ssbi-mpp";
reg = <0x50>;
gpio-controller;
#gpio-cells = <2>;
@@ -444,9 +524,55 @@
regulators {
compatible = "qcom,rpm-pm8921-regulators";
+ pm8921_s1: s1 {};
+ pm8921_s2: s2 {};
+ pm8921_s3: s3 {};
+ pm8921_s4: s4 {};
+ pm8921_s7: s7 {};
+ pm8921_s8: s8 {};
+
+ pm8921_l1: l1 {};
+ pm8921_l2: l2 {};
+ pm8921_l3: l3 {};
+ pm8921_l4: l4 {};
+ pm8921_l5: l5 {};
+ pm8921_l6: l6 {};
+ pm8921_l7: l7 {};
+ pm8921_l8: l8 {};
+ pm8921_l9: l9 {};
+ pm8921_l10: l10 {};
+ pm8921_l11: l11 {};
+ pm8921_l12: l12 {};
+ pm8921_l14: l14 {};
+ pm8921_l15: l15 {};
+ pm8921_l16: l16 {};
+ pm8921_l17: l17 {};
+ pm8921_l18: l18 {};
+ pm8921_l21: l21 {};
+ pm8921_l22: l22 {};
+ pm8921_l23: l23 {};
+ pm8921_l24: l24 {};
+ pm8921_l25: l25 {};
+ pm8921_l26: l26 {};
+ pm8921_l27: l27 {};
+ pm8921_l28: l28 {};
+ pm8921_l29: l29 {};
+
+ pm8921_lvs1: lvs1 {};
+ pm8921_lvs2: lvs2 {};
+ pm8921_lvs3: lvs3 {};
+ pm8921_lvs4: lvs4 {};
+ pm8921_lvs5: lvs5 {};
+ pm8921_lvs6: lvs6 {};
+ pm8921_lvs7: lvs7 {};
+
+ pm8921_usb_switch: usb-switch {};
+
pm8921_hdmi_switch: hdmi-switch {
bias-pull-down;
};
+
+ pm8921_ncp: ncp {};
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 835bdc7..c0e2053 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -8,6 +8,8 @@
aliases {
serial0 = &blsp1_uart2;
+ usid0 = &pm8941_0;
+ usid4 = &pm8841_0;
};
chosen {
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
index c9c2b76..2052b84 100644
--- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
+++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
@@ -3,10 +3,11 @@
/ {
model = "Qualcomm APQ8084/IFC6540";
- compatible = "qcom,apq8084-ifc6540", "qcom,apq8084";
+ compatible = "qcom,apq8084-sbc", "qcom,apq8084";
aliases {
serial0 = &blsp2_uart2;
+ usid0 = &pma8084_0;
};
chosen {
diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
index 3016c70..d174d15 100644
--- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts
+++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
@@ -7,6 +7,7 @@
aliases {
serial0 = &blsp2_uart2;
+ usid0 = &pma8084_0;
};
chosen {
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index fcffeca..08214cb 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -10,6 +10,17 @@
compatible = "qcom,apq8084";
interrupt-parent = <&intc>;
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smem_mem: smem_region@fa00000 {
+ reg = <0xfa00000 0x200000>;
+ no-map;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -89,6 +100,15 @@
clock-frequency = <19200000>;
};
+ smem {
+ compatible = "qcom,smem";
+
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ memory-region = <&smem_mem>;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -103,6 +123,11 @@
<0xf9002000 0x1000>;
};
+ apcs: syscon@f9011000 {
+ compatible = "syscon";
+ reg = <0xf9011000 0x1000>;
+ };
+
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -225,6 +250,22 @@
reg = <0xfc400000 0x4000>;
};
+ tcsr_mutex_regs: syscon@fd484000 {
+ compatible = "syscon";
+ reg = <0xfd484000 0x2000>;
+ };
+
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x80>;
+ #hwlock-cells = <1>;
+ };
+
+ rpm_msg_ram: memory@fc428000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0xfc428000 0x4000>;
+ };
+
tlmm: pinctrl@fd510000 {
compatible = "qcom,apq8084-pinctrl";
reg = <0xfd510000 0x4000>;
@@ -282,4 +323,71 @@
#interrupt-cells = <4>;
};
};
+
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <0 168 1>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-apq8084";
+ qcom,smd-channels = "rpm_requests";
+
+ pma8084-regulators {
+ compatible = "qcom,rpm-pma8084-regulators";
+
+ pma8084_s1: s1 {};
+ pma8084_s2: s2 {};
+ pma8084_s3: s3 {};
+ pma8084_s4: s4 {};
+ pma8084_s5: s5 {};
+ pma8084_s6: s6 {};
+ pma8084_s7: s7 {};
+ pma8084_s8: s8 {};
+ pma8084_s9: s9 {};
+ pma8084_s10: s10 {};
+ pma8084_s11: s11 {};
+ pma8084_s12: s12 {};
+
+ pma8084_l1: l1 {};
+ pma8084_l2: l2 {};
+ pma8084_l3: l3 {};
+ pma8084_l4: l4 {};
+ pma8084_l5: l5 {};
+ pma8084_l6: l6 {};
+ pma8084_l7: l7 {};
+ pma8084_l8: l8 {};
+ pma8084_l9: l9 {};
+ pma8084_l10: l10 {};
+ pma8084_l11: l11 {};
+ pma8084_l12: l12 {};
+ pma8084_l13: l13 {};
+ pma8084_l14: l14 {};
+ pma8084_l15: l15 {};
+ pma8084_l16: l16 {};
+ pma8084_l17: l17 {};
+ pma8084_l18: l18 {};
+ pma8084_l19: l19 {};
+ pma8084_l20: l20 {};
+ pma8084_l21: l21 {};
+ pma8084_l22: l22 {};
+ pma8084_l23: l23 {};
+ pma8084_l24: l24 {};
+ pma8084_l25: l25 {};
+ pma8084_l26: l26 {};
+ pma8084_l27: l27 {};
+
+ pma8084_lvs1: lvs1 {};
+ pma8084_lvs2: lvs2 {};
+ pma8084_lvs3: lvs3 {};
+ pma8084_lvs4: lvs4 {};
+
+ pma8084_5vs1: 5vs1 {};
+ };
+ };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 134cd91..51a40d8 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -49,6 +49,29 @@
qcom,no-pc-write;
};
+ clocks {
+ cxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "cxo_board";
+ };
+
+ pxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-output-names = "pxo_board";
+ };
+
+ sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "sleep_clk";
+ };
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 016f9ad..a0398b6 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -1,6 +1,9 @@
#include "qcom-msm8974.dtsi"
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "Sony Xperia Z1";
@@ -14,24 +17,403 @@
stdout-path = "serial0:115200n8";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
memory@0 {
reg = <0 0x40000000>, <0x40000000 0x40000000>;
device_type = "memory";
};
+
+ smd {
+ rpm {
+ rpm_requests {
+ pm8841-regulators {
+ s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ };
+
+ pm8941-regulators {
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+ vin_5vs-supply = <&pm8941_5v>;
+
+ s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
+ };
+
+ s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ s4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l19 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-allow-set-load;
+ regulator-boot-on;
+ regulator-system-load = <200000>;
+ };
+
+ l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+ };
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
};
&soc {
+ sdhci@f9824900 {
+ status = "ok";
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ bus-width = <8>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_pin_a>;
+ };
+
+ sdhci@f98a4900 {
+ status = "ok";
+
+ bus-width = <4>;
+
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
+
+ cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+ };
+
serial@f991e000 {
status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp1_uart2_pin_a>;
+ };
+
+ pinctrl@fd510000 {
+ blsp1_uart2_pin_a: blsp1-uart2-pin-active {
+ rx {
+ pins = "gpio5";
+ function = "blsp_uart2";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tx {
+ pins = "gpio4";
+ function = "blsp_uart2";
+
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ sdhc1_pin_a: sdhc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+ pins = "gpio62";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdhc2_pin_a: sdhc2-pin-active {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+
};
};
&spmi_bus {
pm8941@0 {
+ charger@1000 {
+ qcom,fast-charge-safe-current = <1500000>;
+ qcom,fast-charge-current-limit = <1500000>;
+ qcom,dc-current-limit = <1800000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,fast-charge-low-threshold-voltage = <3400000>;
+ qcom,auto-recharge-threshold-voltage = <4200000>;
+ qcom,minimum-input-voltage = <4300000>;
+ };
+
+ gpios@c000 {
+ boost_bypass_n_pin: boost-bypass {
+ pins = "gpio21";
+ function = "normal";
+ };
+
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio2", "gpio3", "gpio4", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+ };
+
coincell@2800 {
status = "ok";
qcom,rset-ohms = <2100>;
qcom,vset-millivolts = <3000>;
};
};
+
+ pm8941@1 {
+ wled@d800 {
+ status = "ok";
+
+ qcom,cs-out;
+ qcom,current-limit = <20>;
+ qcom,current-boost-limit = <805>;
+ qcom,switching-freq = <1600>;
+ qcom,ovp = <29>;
+ qcom,num-strings = <2>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 753bdfd..dfdafdc 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -319,6 +319,17 @@
interrupts = <0 208 0>;
};
+ blsp_i2c8: i2c@f9964000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9964000 0x1000>;
+ interrupts = <0 102 IRQ_TYPE_NONE>;
+ clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
blsp_i2c11: i2c@f9967000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi
index 8f1a0b1..9f357f6 100644
--- a/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8841.dtsi
@@ -3,14 +3,14 @@
&spmi_bus {
- usid4: pm8841@4 {
- compatible = "qcom,spmi-pmic";
+ pm8841_0: pm8841@4 {
+ compatible = "qcom,pm8841", "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8841_mpps: mpps@a000 {
- compatible = "qcom,pm8841-mpp";
+ compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
reg = <0xa000 0x400>;
gpio-controller;
#gpio-cells = <2>;
@@ -27,8 +27,8 @@
};
};
- usid5: pm8841@5 {
- compatible = "qcom,spmi-pmic";
+ pm8841_1: pm8841@5 {
+ compatible = "qcom,pm8841", "qcom,spmi-pmic";
reg = <0x5 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index b0d4439..ca53a59 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -4,8 +4,8 @@
&spmi_bus {
- usid0: pm8941@0 {
- compatible ="qcom,spmi-pmic";
+ pm8941_0: pm8941@0 {
+ compatible = "qcom,pm8941", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
@@ -48,7 +48,7 @@
};
pm8941_gpios: gpios@c000 {
- compatible = "qcom,pm8941-gpio";
+ compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
reg = <0xc000 0x2400>;
gpio-controller;
#gpio-cells = <2>;
@@ -91,7 +91,7 @@
};
pm8941_mpps: mpps@a000 {
- compatible = "qcom,pm8941-mpp";
+ compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
reg = <0xa000 0x800>;
gpio-controller;
#gpio-cells = <2>;
@@ -153,23 +153,18 @@
};
};
- usid1: pm8941@1 {
- compatible = "qcom,spmi-pmic";
+ pm8941_1: pm8941@1 {
+ compatible = "qcom,pm8941", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
- wled@d800 {
+ pm8941_wled: wled@d800 {
compatible = "qcom,pm8941-wled";
reg = <0xd800 0x100>;
label = "backlight";
- qcom,cs-out;
- qcom,current-limit = <20>;
- qcom,current-boost-limit = <805>;
- qcom,switching-freq = <1600>;
- qcom,ovp = <29>;
- qcom,num-strings = <2>;
+ status = "disabled";
};
};
};
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index 5e240cc..4e9bd3f 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -4,8 +4,8 @@
&spmi_bus {
- usid0: pma8084@0 {
- compatible = "qcom,spmi-pmic";
+ pma8084_0: pma8084@0 {
+ compatible = "qcom,pma8084", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
@@ -19,7 +19,7 @@
};
pma8084_gpios: gpios@c000 {
- compatible = "qcom,pma8084-gpio";
+ compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
reg = <0xc000 0x1600>;
gpio-controller;
#gpio-cells = <2>;
@@ -48,7 +48,7 @@
};
pma8084_mpps: mpps@a000 {
- compatible = "qcom,pma8084-mpp";
+ compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
reg = <0xa000 0x800>;
gpio-controller;
#gpio-cells = <2>;
@@ -101,8 +101,8 @@
};
};
- usid1: pma8084@1 {
- compatible = "qcom,spmi-pmic";
+ pma8084_1: pma8084@1 {
+ compatible = "qcom,pma8084", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index a4c4259..5902570 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -23,7 +23,7 @@
chosen {
bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
- stdout-path = &scifa0;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -110,7 +110,7 @@
gpios = <&pfc 324 GPIO_ACTIVE_LOW>;
linux,code = <KEY_0>;
label = "S16";
- gpio-key,wakeup;
+ wakeup-source;
};
menu-key {
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 105d9c9..78a21f2 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -85,7 +85,7 @@
gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "SW3";
- gpio-key,wakeup;
+ wakeup-source;
};
back-key {
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index e14cb14..7676646 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -26,6 +26,7 @@
reg = <0x0>;
clock-frequency = <800000000>;
power-domains = <&pd_a3sm>;
+ next-level-cache = <&L2>;
};
};
@@ -37,6 +38,18 @@
<0xc2000000 0x1000>;
};
+ L2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0xf0100000 0x1000>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_a3sm>;
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ arm,shared-override;
+ cache-unified;
+ cache-level = <2>;
+ };
+
dbsc3: memory-controller@fe400000 {
compatible = "renesas,dbsc3-r8a7740";
reg = <0xfe400000 0x400>;
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 90543b1..b1aa025 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -28,8 +28,8 @@
};
chosen {
- bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw";
- stdout-path = &scif0;
+ bootargs = "ignore_loglevel ip=dhcp root=/dev/nfs rw";
+ stdout-path = "serial0:115200n8";
};
memory {
@@ -137,10 +137,14 @@
};
sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
- "sdhi0_cd";
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
renesas,function = "sdhi0";
};
+ sdhi0_pup_pins: sd0_pup {
+ renesas,groups = "sdhi0_cd", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ bias-pull-up;
+ };
hspi0_pins: hspi0 {
renesas,groups = "hspi0_a";
@@ -168,8 +172,13 @@
};
};
+&rcar_sound {
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+};
+
&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-0 = <&sdhi0_pins>, <&sdhi0_pup_pins>;
pinctrl-names = "default";
vmmc-supply = <&fixedregulator3v3>;
@@ -184,16 +193,19 @@
status = "okay";
flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl008k", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
m25p,fast-read;
- partition@0 {
- label = "data(spi)";
- reg = <0x00000000 0x00100000>;
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "data(spi)";
+ reg = <0x00000000 0x00100000>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 4f8e078..b140627 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -236,7 +236,12 @@
};
rcar_sound: sound@ffd90000 {
- #sound-dai-cells = <1>;
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1";
reg = <0xffd90000 0x1000>, /* SRU */
<0xffd91000 0x240>, /* SSI */
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index c553abd..44ba69b 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -47,13 +47,13 @@
compatible = "renesas,lager", "renesas,r8a7790";
aliases {
- serial0 = &scifa0;
+ serial0 = &scif0;
serial1 = &scifa1;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scifa0;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -77,28 +77,28 @@
button@1 {
linux,code = <KEY_1>;
label = "SW2-1";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
button@2 {
linux,code = <KEY_2>;
label = "SW2-2";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
};
button@3 {
linux,code = <KEY_3>;
label = "SW2-3";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
};
button@4 {
linux,code = <KEY_4>;
label = "SW2-4";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
};
@@ -296,9 +296,9 @@
renesas,function = "du";
};
- scifa0_pins: serial0 {
- renesas,groups = "scifa0_data";
- renesas,function = "scifa0";
+ scif0_pins: serial0 {
+ renesas,groups = "scif0_data";
+ renesas,function = "scif0";
};
ether_pins: ether {
@@ -439,8 +439,6 @@
status = "okay";
flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
@@ -450,25 +448,30 @@
spi-cpol;
m25p,fast-read;
- partition@0 {
- label = "loader";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "user";
- reg = <0x00040000 0x00400000>;
- read-only;
- };
- partition@440000 {
- label = "flash";
- reg = <0x00440000 0x03bc0000>;
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash";
+ reg = <0x00440000 0x03bc0000>;
+ };
};
};
};
-&scifa0 {
- pinctrl-0 = <&scifa0_pins>;
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
status = "okay";
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index e07ae5d..7dfd393 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -143,7 +143,7 @@
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
- gpio-ranges = <&pfc 0 32 32>;
+ gpio-ranges = <&pfc 0 32 30>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
@@ -156,7 +156,7 @@
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
- gpio-ranges = <&pfc 0 64 32>;
+ gpio-ranges = <&pfc 0 64 30>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
@@ -266,7 +266,7 @@
};
dmac0: dma-controller@e6700000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
0 200 IRQ_TYPE_LEVEL_HIGH
@@ -297,7 +297,7 @@
};
dmac1: dma-controller@e6720000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
0 216 IRQ_TYPE_LEVEL_HIGH
@@ -328,7 +328,7 @@
};
audma0: dma-controller@ec700000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH
0 320 IRQ_TYPE_LEVEL_HIGH
@@ -357,7 +357,7 @@
};
audma1: dma-controller@ec720000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH
0 333 IRQ_TYPE_LEVEL_HIGH
@@ -386,7 +386,7 @@
};
usb_dmac0: dma-controller@e65a0000 {
- compatible = "renesas,usb-dmac";
+ compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
0 109 IRQ_TYPE_LEVEL_HIGH>;
@@ -398,7 +398,7 @@
};
usb_dmac1: dma-controller@e65b0000 {
- compatible = "renesas,usb-dmac";
+ compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
0 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -417,6 +417,7 @@
interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -428,6 +429,7 @@
interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -439,6 +441,7 @@
interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -450,6 +453,7 @@
interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -1766,7 +1770,7 @@
};
ipmmu_sy0: mmu@e6280000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
<0 224 IRQ_TYPE_LEVEL_HIGH>;
@@ -1775,7 +1779,7 @@
};
ipmmu_sy1: mmu@e6290000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1783,7 +1787,7 @@
};
ipmmu_ds: mmu@e6740000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
<0 199 IRQ_TYPE_LEVEL_HIGH>;
@@ -1792,7 +1796,7 @@
};
ipmmu_mp: mmu@ec680000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1800,7 +1804,7 @@
};
ipmmu_mx: mmu@fe951000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 221 IRQ_TYPE_LEVEL_HIGH>;
@@ -1809,7 +1813,7 @@
};
ipmmu_rt: mmu@ffc80000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
deleted file mode 100644
index 655d180..0000000
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * Device Tree Source for the Henninger board
- *
- * Copyright (C) 2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Henninger";
- compatible = "renesas,henninger", "renesas,r8a7791";
-
- aliases {
- serial0 = &scif0;
- };
-
- chosen {
- bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif0;
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0 0x40000000 0 0x40000000>;
- };
-
- memory@200000000 {
- device_type = "memory";
- reg = <2 0x00000000 0 0x40000000>;
- };
-
- vcc_sdhi0: regulator@0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vccq_sdhi0: regulator@1 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-
- vcc_sdhi2: regulator@2 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI2 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vccq_sdhi2: regulator@3 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI2 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-};
-
-&extal_clk {
- clock-frequency = <20000000>;
-};
-
-&pfc {
- scif0_pins: serial0 {
- renesas,groups = "scif0_data_d";
- renesas,function = "scif0";
- };
-
- ether_pins: ether {
- renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
- renesas,function = "eth";
- };
-
- phy1_pins: phy1 {
- renesas,groups = "intc_irq0";
- renesas,function = "intc";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
- renesas,function = "sdhi0";
- };
-
- sdhi2_pins: sd2 {
- renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
- renesas,function = "sdhi2";
- };
-
- i2c2_pins: i2c2 {
- renesas,groups = "i2c2";
- renesas,function = "i2c2";
- };
-
- qspi_pins: spi0 {
- renesas,groups = "qspi_ctrl", "qspi_data4";
- renesas,function = "qspi";
- };
-
- msiof0_pins: spi1 {
- renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
- "msiof0_tx";
- renesas,function = "msiof0";
- };
-
- usb0_pins: usb0 {
- renesas,groups = "usb0";
- renesas,function = "usb0";
- };
-
- usb1_pins: usb1 {
- renesas,groups = "usb1";
- renesas,function = "usb1";
- };
-
- vin0_pins: vin0 {
- renesas,groups = "vin0_data8", "vin0_clk";
- renesas,function = "vin0";
- };
-
- can0_pins: can0 {
- renesas,groups = "can0_data";
- renesas,function = "can0";
- };
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-ðer {
- pinctrl-0 = <ðer_pins &phy1_pins>;
- pinctrl-names = "default";
-
- phy-handle = <&phy1>;
- renesas,ether-link-active-low;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- interrupt-parent = <&irqc0>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- micrel,led-mode = <1>;
- };
-};
-
-&sata0 {
- status = "okay";
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&sdhi2 {
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vcc_sdhi2>;
- vqmmc-supply = <&vccq_sdhi2>;
- cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- composite-in@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
- remote = <&vin0>;
-
- port {
- adv7180: endpoint {
- bus-width = <8>;
- remote-endpoint = <&vin0ep>;
- };
- };
- };
-};
-
-&qspi {
- pinctrl-0 = <&qspi_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25fl512s", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <30000000>;
- spi-tx-bus-width = <4>;
- spi-rx-bus-width = <4>;
- m25p,fast-read;
-
- partition@0 {
- label = "loader_prg";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "user_prg";
- reg = <0x00040000 0x00400000>;
- read-only;
- };
- partition@440000 {
- label = "flash_fs";
- reg = <0x00440000 0x03bc0000>;
- };
- };
-};
-
-&msiof0 {
- pinctrl-0 = <&msiof0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- pmic@0 {
- compatible = "renesas,r2a11302ft";
- reg = <0>;
- spi-max-frequency = <6000000>;
- spi-cpol;
- spi-cpha;
- };
-};
-
-&pci0 {
- status = "okay";
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-};
-
-&pci1 {
- status = "okay";
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-};
-
-&hsusb {
- status = "okay";
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
- renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
-};
-
-&usbphy {
- status = "okay";
-};
-
-&pcie_bus_clk {
- status = "okay";
-};
-
-&pciec {
- status = "okay";
-};
-
-/* composite video input */
-&vin0 {
- status = "okay";
- pinctrl-0 = <&vin0_pins>;
- pinctrl-names = "default";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vin0ep: endpoint {
- remote-endpoint = <&adv7180>;
- bus-width = <8>;
- };
- };
-};
-
-&can0 {
- pinctrl-0 = <&can0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index fc44ea3..c94a0fb 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -54,7 +54,7 @@
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif0;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -79,77 +79,77 @@
gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
label = "SW2-1";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-2 {
gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_2>;
label = "SW2-2";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-3 {
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>;
label = "SW2-3";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-4 {
gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_4>;
label = "SW2-4";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-a {
gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_A>;
label = "SW30";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-b {
gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_B>;
label = "SW31";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-c {
gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_C>;
label = "SW32";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-d {
gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_D>;
label = "SW33";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-e {
gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_E>;
label = "SW34";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-f {
gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_F>;
label = "SW35";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-g {
gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_G>;
label = "SW36";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
};
@@ -326,7 +326,7 @@
};
du_pins: du {
- renesas,groups = "du_rgb666", "du_sync", "du_disp", "du_clk_out_0";
+ renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
renesas,function = "du";
};
@@ -479,8 +479,6 @@
status = "okay";
flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
@@ -490,19 +488,24 @@
spi-cpol;
m25p,fast-read;
- partition@0 {
- label = "loader";
- reg = <0x00000000 0x00080000>;
- read-only;
- };
- partition@80000 {
- label = "user";
- reg = <0x00080000 0x00580000>;
- read-only;
- };
- partition@600000 {
- label = "flash";
- reg = <0x00600000 0x03a00000>;
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "user";
+ reg = <0x00080000 0x00580000>;
+ read-only;
+ };
+ partition@600000 {
+ label = "flash";
+ reg = <0x00600000 0x03a00000>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index fe0f12f..71ba7b6 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -22,7 +22,7 @@
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif0;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -134,6 +134,11 @@
renesas,groups = "vin0_data8", "vin0_clk";
renesas,function = "vin0";
};
+
+ can0_pins: can0 {
+ renesas,groups = "can0_data";
+ renesas,function = "can0";
+ };
};
&scif0 {
@@ -187,8 +192,6 @@
status = "okay";
flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
@@ -196,19 +199,24 @@
spi-rx-bus-width = <4>;
m25p,fast-read;
- partition@0 {
- label = "loader_prg";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "user_prg";
- reg = <0x00040000 0x00400000>;
- read-only;
- };
- partition@440000 {
- label = "flash_fs";
- reg = <0x00440000 0x03bc0000>;
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "loader_prg";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user_prg";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash_fs";
+ reg = <0x00440000 0x03bc0000>;
+ };
};
};
};
@@ -269,6 +277,14 @@
status = "okay";
};
+&hsusb {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
&usbphy {
status = "okay";
};
@@ -280,3 +296,10 @@
&pciec {
status = "okay";
};
+
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 328f48b..2a369dd 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -100,7 +100,7 @@
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
- gpio-ranges = <&pfc 0 32 32>;
+ gpio-ranges = <&pfc 0 32 26>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
@@ -255,7 +255,7 @@
};
dmac0: dma-controller@e6700000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
0 200 IRQ_TYPE_LEVEL_HIGH
@@ -286,7 +286,7 @@
};
dmac1: dma-controller@e6720000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
0 216 IRQ_TYPE_LEVEL_HIGH
@@ -317,7 +317,7 @@
};
audma0: dma-controller@ec700000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH
0 320 IRQ_TYPE_LEVEL_HIGH
@@ -346,7 +346,7 @@
};
audma1: dma-controller@ec720000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH
0 333 IRQ_TYPE_LEVEL_HIGH
@@ -375,7 +375,7 @@
};
usb_dmac0: dma-controller@e65a0000 {
- compatible = "renesas,usb-dmac";
+ compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
0 109 IRQ_TYPE_LEVEL_HIGH>;
@@ -387,7 +387,7 @@
};
usb_dmac1: dma-controller@e65b0000 {
- compatible = "renesas,usb-dmac";
+ compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
0 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -407,6 +407,7 @@
interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -418,6 +419,7 @@
interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -429,6 +431,7 @@
interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -440,6 +443,7 @@
interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -451,6 +455,7 @@
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -463,6 +468,7 @@
interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -509,7 +515,6 @@
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a7791";
reg = <0 0xe6060000 0 0x250>;
- #gpio-range-cells = <3>;
};
mmcif0: mmc@ee200000 {
@@ -786,6 +791,18 @@
status = "disabled";
};
+ avb: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a7791",
+ "renesas,etheravb-rcar-gen2";
+ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+ interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sata0: sata@ee300000 {
compatible = "renesas,sata-r8a7791";
reg = <0 0xee300000 0 0x2000>;
@@ -1163,14 +1180,6 @@
clock-mult = <1>;
clock-output-names = "m2";
};
- imp_clk: imp_clk {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <4>;
- clock-mult = <1>;
- clock-output-names = "imp";
- };
rclk_clk: rclk_clk {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
@@ -1338,16 +1347,18 @@
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
clocks = <&zx_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>,
- <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>;
+ <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>,
+ <&zs_clk>;
#clock-cells = <1>;
clock-indices = <
R8A7791_CLK_IPMMU_SGX R8A7791_CLK_MLB
R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
- R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
+ R8A7791_CLK_ETHERAVB R8A7791_CLK_ETHER
+ R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
>;
clock-output-names =
- "ipmmu_sgx", "mlb", "vin2", "vin1", "vin0", "ether",
- "sata1", "sata0";
+ "ipmmu_sgx", "mlb", "vin2", "vin1", "vin0",
+ "etheravb", "ether", "sata1", "sata0";
};
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1579,7 +1590,7 @@
};
ipmmu_sy0: mmu@e6280000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
<0 224 IRQ_TYPE_LEVEL_HIGH>;
@@ -1588,7 +1599,7 @@
};
ipmmu_sy1: mmu@e6290000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1596,7 +1607,7 @@
};
ipmmu_ds: mmu@e6740000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
<0 199 IRQ_TYPE_LEVEL_HIGH>;
@@ -1605,7 +1616,7 @@
};
ipmmu_mp: mmu@ec680000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1613,7 +1624,7 @@
};
ipmmu_mx: mmu@fe951000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 221 IRQ_TYPE_LEVEL_HIGH>;
@@ -1622,7 +1633,7 @@
};
ipmmu_rt: mmu@ffc80000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1630,7 +1641,7 @@
};
ipmmu_gp: mmu@e62a0000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
<0 261 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 96443ec..3e31224 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -24,7 +24,7 @@
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif0;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -37,7 +37,37 @@
clock-frequency = <20000000>;
};
+&pfc {
+ scif0_pins: serial0 {
+ renesas,groups = "scif0_data_d";
+ renesas,function = "scif0";
+ };
+
+ scif1_pins: serial1 {
+ renesas,groups = "scif1_data_d";
+ renesas,function = "scif1";
+ };
+
+ ether_pins: ether {
+ renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+ renesas,function = "eth";
+ };
+
+ phy1_pins: phy1 {
+ renesas,groups = "intc_irq0";
+ renesas,function = "intc";
+ };
+
+ qspi_pins: spi0 {
+ renesas,groups = "qspi_ctrl", "qspi_data4";
+ renesas,function = "qspi";
+ };
+};
+
ðer {
+ pinctrl-0 = <ðer_pins &phy1_pins>;
+ pinctrl-names = "default";
+
phy-handle = <&phy1>;
renesas,ether-link-active-low;
status = "okay";
@@ -55,9 +85,53 @@
};
&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
&scif1 {
+ pinctrl-0 = <&scif1_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash@0 {
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ spi-cpol;
+ spi-cpha;
+ m25p,fast-read;
+
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash";
+ reg = <0x00440000 0x03bc0000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index c465404..aef9e69 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -18,6 +18,10 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ spi0 = &qspi;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -53,6 +57,118 @@
interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO0>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO1>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO2>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO3>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO4>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO5>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO6>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6055800 0 0x50>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO7>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ thermal@e61f0000 {
+ compatible = "renesas,thermal-r8a7793", "renesas,rcar-thermal";
+ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp5_clks R8A7793_CLK_THERMAL>;
+ power-domains = <&cpg_clocks>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -114,12 +230,189 @@
power-domains = <&cpg_clocks>;
};
+ pfc: pfc@e6060000 {
+ compatible = "renesas,pfc-r8a7793";
+ reg = <0 0xe6060000 0 0x250>;
+ };
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifa1: serial@e6c50000 {
+ compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ reg = <0 0xe6c50000 0 64>;
+ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifa2: serial@e6c60000 {
+ compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ reg = <0 0xe6c60000 0 64>;
+ interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifa3: serial@e6c70000 {
+ compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ reg = <0 0xe6c70000 0 64>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifa4: serial@e6c78000 {
+ compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ reg = <0 0xe6c78000 0 64>;
+ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifa5: serial@e6c80000 {
+ compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ reg = <0 0xe6c80000 0 64>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifb0: serial@e6c20000 {
+ compatible = "renesas,scifb-r8a7793", "renesas,scifb";
+ reg = <0 0xe6c20000 0 64>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifb1: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a7793", "renesas,scifb";
+ reg = <0 0xe6c30000 0 64>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifb2: serial@e6ce0000 {
+ compatible = "renesas,scifb-r8a7793", "renesas,scifb";
+ reg = <0 0xe6ce0000 0 64>;
+ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
+ dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -130,6 +423,92 @@
interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif2: serial@e6e58000 {
+ compatible = "renesas,scif-r8a7793", "renesas,scif";
+ reg = <0 0xe6e58000 0 64>;
+ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF2>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6ea8000 {
+ compatible = "renesas,scif-r8a7793", "renesas,scif";
+ reg = <0 0xe6ea8000 0 64>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF3>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6ee0000 {
+ compatible = "renesas,scif-r8a7793", "renesas,scif";
+ reg = <0 0xe6ee0000 0 64>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF4>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6ee8000 {
+ compatible = "renesas,scif-r8a7793", "renesas,scif";
+ reg = <0 0xe6ee8000 0 64>;
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF5>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a7793", "renesas,hscif";
+ reg = <0 0xe62c0000 0 96>;
+ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a7793", "renesas,hscif";
+ reg = <0 0xe62c8000 0 96>;
+ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e62d0000 {
+ compatible = "renesas,hscif-r8a7793", "renesas,hscif";
+ reg = <0 0xe62d0000 0 96>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
+ dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -146,6 +525,50 @@
status = "disabled";
};
+ qspi: spi@e6b10000 {
+ compatible = "renesas,qspi-r8a7793", "renesas,qspi";
+ reg = <0 0xe6b10000 0 0x2c>;
+ interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a7793";
+ reg = <0 0xfeb00000 0 0x40000>,
+ <0 0xfeb90000 0 0x1c>;
+ reg-names = "du", "lvds.0";
+ interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+ <0 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_DU0>,
+ <&mstp7_clks R8A7793_CLK_DU1>,
+ <&mstp7_clks R8A7793_CLK_LVDS0>;
+ clock-names = "du.0", "du.1", "lvds.0";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
@@ -299,6 +722,21 @@
"tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
"vsp1-du0", "vsps";
};
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+ <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7793_CLK_SCIFA2 R8A7793_CLK_SCIFA1 R8A7793_CLK_SCIFA0
+ R8A7793_CLK_SCIFB0 R8A7793_CLK_SCIFB1 R8A7793_CLK_SCIFB2
+ R8A7793_CLK_SYS_DMAC1 R8A7793_CLK_SYS_DMAC0
+ >;
+ clock-output-names =
+ "scifa2", "scifa1", "scifa0", "scifb0",
+ "scifb1", "scifb2", "sys-dmac1", "sys-dmac0";
+ };
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,r8a7793-mstp-clocks",
"renesas,cpg-mstp-clocks";
@@ -329,6 +767,14 @@
clock-indices = <R8A7793_CLK_IRQC>;
clock-output-names = "irqc";
};
+ mstp5_clks: mstp5_clks@e6150144 {
+ compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+ clocks = <&extal_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7793_CLK_THERMAL>;
+ clock-output-names = "thermal";
+ };
mstp7_clks: mstp7_clks@e615014c {
compatible = "renesas,r8a7793-mstp-clocks",
"renesas,cpg-mstp-clocks";
@@ -369,6 +815,94 @@
"ipmmu_sgx", "vin2", "vin1", "vin0", "ether",
"sata1", "sata0";
};
+ mstp9_clks: mstp9_clks@e6150994 {
+ compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+ clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cpg_clocks R8A7793_CLK_QSPI>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6
+ R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
+ R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
+ R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
+ R8A7793_CLK_QSPI_MOD
+ >;
+ clock-output-names =
+ "gpio7", "gpio6", "gpio5", "gpio4",
+ "gpio3", "gpio2", "gpio1", "gpio0",
+ "qspi_mod";
+ };
+ mstp11_clks: mstp11_clks@e615099c {
+ compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7793_CLK_SCIFA3 R8A7793_CLK_SCIFA4 R8A7793_CLK_SCIFA5
+ >;
+ clock-output-names = "scifa3", "scifa4", "scifa5";
+ };
};
+ ipmmu_sy0: mmu@e6280000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xe6280000 0 0x1000>;
+ interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
+ <0 224 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_sy1: mmu@e6290000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xe6290000 0 0x1000>;
+ interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_ds: mmu@e6740000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xe6740000 0 0x1000>;
+ interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+ <0 199 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_mp: mmu@ec680000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xec680000 0 0x1000>;
+ interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_mx: mmu@fe951000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xfe951000 0 0x1000>;
+ interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+ <0 221 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_rt: mmu@ffc80000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xffc80000 0 0x1000>;
+ interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_gp: mmu@e62a0000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xe62a0000 0 0x1000>;
+ interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
+ <0 261 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 928cfa6..2394e48 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -21,7 +21,7 @@
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif2;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -33,17 +33,115 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb1>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+ x2_clk: x2-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
+
+ x13_clk: x13-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+ <&mstp7_clks R8A7794_CLK_DU0>,
+ <&x13_clk>, <&x2_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ };
};
&extal_clk {
clock-frequency = <20000000>;
};
+&pfc {
+ du_pins: du {
+ renesas,groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0";
+ renesas,function = "du";
+ };
+
+ scif2_pins: serial2 {
+ renesas,groups = "scif2_data";
+ renesas,function = "scif2";
+ };
+
+ ether_pins: ether {
+ renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+ renesas,function = "eth";
+ };
+
+ phy1_pins: phy1 {
+ renesas,groups = "intc_irq8";
+ renesas,function = "intc";
+ };
+
+ i2c1_pins: i2c1 {
+ renesas,groups = "i2c1";
+ renesas,function = "i2c1";
+ };
+
+ vin0_pins: vin0 {
+ renesas,groups = "vin0_data8", "vin0_clk";
+ renesas,function = "vin0";
+ };
+};
+
&cmt0 {
status = "okay";
};
ðer {
+ pinctrl-0 = <ðer_pins &phy1_pins>;
+ pinctrl-names = "default";
+
phy-handle = <&phy1>;
renesas,ether-link-active-low;
status = "okay";
@@ -56,6 +154,46 @@
};
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin0>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin0ep>;
+ };
+ };
+ };
+};
+
+&vin0 {
+ status = "okay";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
+
&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 48ff3e2..5a8dcac 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "r8a7794.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "SILK";
@@ -23,7 +24,7 @@
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif2;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -39,6 +40,30 @@
regulator-boot-on;
regulator-always-on;
};
+
+ vcc_sdhi1: regulator@3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI1 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi1: regulator@4 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
};
&extal_clk {
@@ -71,6 +96,11 @@
renesas,function = "mmc";
};
+ sdhi1_pins: sd1 {
+ renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+ renesas,function = "sdhi1";
+ };
+
qspi_pins: spi0 {
renesas,groups = "qspi_ctrl", "qspi_data4";
renesas,function = "qspi";
@@ -147,6 +177,16 @@
status = "okay";
};
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi1>;
+ vqmmc-supply = <&vccq_sdhi1>;
+ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&qspi {
pinctrl-0 = <&qspi_pins>;
pinctrl-names = "default";
@@ -154,8 +194,6 @@
status = "okay";
flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
@@ -165,19 +203,24 @@
spi-cpha;
m25p,fast-read;
- partition@0 {
- label = "loader";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "user";
- reg = <0x00040000 0x00400000>;
- read-only;
- };
- partition@440000 {
- label = "flash";
- reg = <0x00440000 0x03bc0000>;
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash";
+ reg = <0x00440000 0x03bc0000>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index a9977d6..6c78f1f 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -217,11 +217,10 @@
pfc: pin-controller@e6060000 {
compatible = "renesas,pfc-r8a7794";
reg = <0 0xe6060000 0 0x11c>;
- #gpio-range-cells = <3>;
};
dmac0: dma-controller@e6700000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
0 200 IRQ_TYPE_LEVEL_HIGH
@@ -252,7 +251,7 @@
};
dmac1: dma-controller@e6720000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
0 216 IRQ_TYPE_LEVEL_HIGH
@@ -519,6 +518,7 @@
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -530,6 +530,7 @@
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -541,6 +542,7 @@
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -552,6 +554,7 @@
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -563,6 +566,7 @@
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -574,6 +578,7 @@
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -750,6 +755,34 @@
};
};
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a7794";
+ reg = <0 0xfeb00000 0 0x40000>;
+ reg-names = "du";
+ interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+ <0 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+ <&mstp7_clks R8A7794_CLK_DU0>;
+ clock-names = "du.0", "du.1";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb0: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_rgb1: endpoint {
+ };
+ };
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
@@ -879,14 +912,6 @@
clock-mult = <1>;
clock-output-names = "m2";
};
- imp_clk: imp_clk {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <4>;
- clock-mult = <1>;
- clock-output-names = "imp";
- };
rclk_clk: rclk_clk {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
@@ -1025,19 +1050,20 @@
reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
clocks = <&mp_clk>, <&mp_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
- <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
+ <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&zx_clk>;
#clock-cells = <1>;
clock-indices = <
R8A7794_CLK_EHCI R8A7794_CLK_HSUSB
R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5
R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0
R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1
- R8A7794_CLK_SCIF0
+ R8A7794_CLK_SCIF0 R8A7794_CLK_DU0
>;
clock-output-names =
"ehci", "hsusb",
"hscif2", "scif5", "scif4", "hscif1", "hscif0",
- "scif3", "scif2", "scif1", "scif0";
+ "scif3", "scif2", "scif1", "scif0", "du0";
};
mstp8_clks: mstp8_clks@e6150990 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1083,7 +1109,7 @@
};
ipmmu_sy0: mmu@e6280000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
<0 224 IRQ_TYPE_LEVEL_HIGH>;
@@ -1092,7 +1118,7 @@
};
ipmmu_sy1: mmu@e6290000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1100,15 +1126,16 @@
};
ipmmu_ds: mmu@e6740000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
<0 199 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
+ status = "disabled";
};
ipmmu_mp: mmu@ec680000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1116,15 +1143,16 @@
};
ipmmu_mx: mmu@fe951000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 221 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
+ status = "disabled";
};
ipmmu_gp: mmu@e62a0000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
<0 261 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
new file mode 100644
index 0000000..28a0336
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -0,0 +1,64 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+ model = "Rockchip RK3036 Evaluation board";
+ compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
+};
+
+&i2c1 {
+ status = "okay";
+
+ hym8563: hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
new file mode 100644
index 0000000..992f9ca
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -0,0 +1,300 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+ model = "Rockchip RK3036 KylinBoard";
+ compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&acodec {
+ status = "okay";
+};
+
+&emmc {
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int &global_pwroff>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_18>;
+ vcc9-supply = <&vcc_io>;
+ vcc10-supply = <&vcc_io>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ vddio-supply = <&vccio_pmu>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_arm";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vccio_pmu: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_tp: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_tp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc18_lcd: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vout5: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vout5";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca_codec: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca_codec";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_wl: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_wl";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_lcd: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&sdio {
+ status = "okay";
+
+ broken-cd;
+ bus-width = <4>;
+ cap-sdio-irq;
+ default-sample-phase = <90>;
+ keep-power-in-suspend;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&pinctrl {
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
+ };
+ };
+
+ sleep {
+ global_pwroff: global-pwroff {
+ rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
new file mode 100644
index 0000000..b9567c1
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -0,0 +1,622 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "rockchip,rk3036";
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ mshc0 = &emmc;
+ mshc1 = &sdmmc;
+ mshc2 = &sdio;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "rockchip,rk3036-smp";
+
+ cpu0: cpu@f00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf00>;
+ resets = <&cru SRST_CORE0>;
+ operating-points = <
+ /* KHz uV */
+ 816000 1000000
+ >;
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
+ };
+
+ cpu1: cpu@f01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf01>;
+ resets = <&cru SRST_CORE1>;
+ };
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma@20078000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x20078000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC2>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ bus_intmem@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10080000 0x2000>;
+
+ smp-sram@0 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x00 0x10>;
+ };
+ };
+
+ gic: interrupt-controller@10139000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0x10139000 0x1000>,
+ <0x1013a000 0x1000>,
+ <0x1013c000 0x2000>,
+ <0x1013e000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ usb_otg: usb@10180000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x10180000 0x40000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG0>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <275>;
+ g-tx-fifo-size = <256 128 128 64 64 32>;
+ g-use-dma;
+ status = "disabled";
+ };
+
+ usb_host: usb@101c0000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x101c0000 0x40000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG1>;
+ clock-names = "otg";
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ sdmmc: dwmmc@10214000 {
+ compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x10214000 0x4000>;
+ clock-frequency = <37500000>;
+ clock-freq-min-max = <400000 37500000>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sdio: dwmmc@10218000 {
+ compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x10218000 0x4000>;
+ clock-freq-min-max = <400000 37500000>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ emmc: dwmmc@1021c000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ reg = <0x1021c000 0x4000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ broken-cd;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ clock-frequency = <37500000>;
+ clock-freq-min-max = <400000 37500000>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ default-sample-phase = <158>;
+ disable-wp;
+ dmas = <&pdma 12>;
+ dma-names = "rx-tx";
+ fifo-depth = <0x100>;
+ mmc-ddr-1_8v;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ status = "disabled";
+ };
+
+ i2s: i2s@10220000 {
+ compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
+ reg = <0x10220000 0x4000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S>, <&cru SCLK_I2S>;
+ dmas = <&pdma 0>, <&pdma 1>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_bus>;
+ status = "disabled";
+ };
+
+ cru: clock-controller@20000000 {
+ compatible = "rockchip,rk3036-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks = <&cru PLL_GPLL>;
+ assigned-clock-rates = <594000000>;
+ };
+
+ grf: syscon@20008000 {
+ compatible = "rockchip,rk3036-grf", "syscon";
+ reg = <0x20008000 0x1000>;
+ };
+
+ acodec: acodec-ana@20030000 {
+ compatible = "rk3036-codec";
+ reg = <0x20030000 0x4000>;
+ rockchip,grf = <&grf>;
+ clock-names = "acodec_pclk";
+ clocks = <&cru PCLK_ACODEC>;
+ status = "disabled";
+ };
+
+ timer: timer@20044000 {
+ compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
+ reg = <0x20044000 0x20>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>, <&cru PCLK_TIMER>;
+ clock-names = "timer", "pclk";
+ };
+
+ pwm0: pwm@20050000 {
+ compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+ reg = <0x20050000 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@20050010 {
+ compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+ reg = <0x20050010 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@20050020 {
+ compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+ reg = <0x20050020 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@20050030 {
+ compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+ reg = <0x20050030 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@20056000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0x20056000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@2005a000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0x2005a000 0x1000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ status = "disabled";
+ };
+
+ uart0: serial@20060000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg = <0x20060000 0x100>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "disabled";
+ };
+
+ uart1: serial@20064000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg = <0x20064000 0x100>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ status = "disabled";
+ };
+
+ uart2: serial@20068000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg = <0x20068000 0x100>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@20072000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0x20072000 0x1000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3036-pinctrl";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0@2007c000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2007c000 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1@20080000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20080000 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2@20084000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20084000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_default: pcfg_pull_default {
+ bias-pull-pin-default;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins = <0 1 2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins = <0 27 1 &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ sdmmc_cd: sdmcc-cd {
+ rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>,
+ <1 19 RK_FUNC_1 &pcfg_pull_default>,
+ <1 20 RK_FUNC_1 &pcfg_pull_default>,
+ <1 21 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
+
+ sdio {
+ sdio_bus1: sdio-bus1 {
+ rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ sdio_bus4: sdio-bus4 {
+ rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>,
+ <0 12 RK_FUNC_1 &pcfg_pull_default>,
+ <0 13 RK_FUNC_1 &pcfg_pull_default>,
+ <0 14 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ sdio_cmd: sdio-cmd {
+ rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ sdio_clk: sdio-clk {
+ rockchip,pins = <0 9 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ emmc {
+ /*
+ * We run eMMC at max speed; bump up drive strength.
+ * We also have external pulls, so disable the internal ones.
+ */
+ emmc_clk: emmc-clk {
+ rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>,
+ <1 25 RK_FUNC_2 &pcfg_pull_default>,
+ <1 26 RK_FUNC_2 &pcfg_pull_default>,
+ <1 27 RK_FUNC_2 &pcfg_pull_default>,
+ <1 28 RK_FUNC_2 &pcfg_pull_default>,
+ <1 29 RK_FUNC_2 &pcfg_pull_default>,
+ <1 30 RK_FUNC_2 &pcfg_pull_default>,
+ <1 31 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
+ <0 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+ <0 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
+ <2 21 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s {
+ i2s_bus: i2s-bus {
+ rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_none>,
+ <1 1 RK_FUNC_1 &pcfg_pull_none>,
+ <1 2 RK_FUNC_1 &pcfg_pull_none>,
+ <1 3 RK_FUNC_1 &pcfg_pull_none>,
+ <1 4 RK_FUNC_1 &pcfg_pull_none>,
+ <1 5 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>,
+ <0 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>,
+ <2 23 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ /* no rts / cts for uart1 */
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>,
+ <1 19 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ /* no rts / cts for uart2 */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 946f187..58bac50 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -103,6 +103,8 @@
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};
@@ -118,6 +120,8 @@
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};
@@ -133,6 +137,8 @@
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};
@@ -153,6 +159,19 @@
clock-names = "timer", "pclk";
};
+ efuse: efuse@20010000 {
+ compatible = "rockchip,rockchip-efuse";
+ reg = <0x20010000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cru PCLK_EFUSE>;
+ clock-names = "pclk_efuse";
+
+ cpu_leakage: cpu_leakage {
+ reg = <0x17 0x1>;
+ };
+ };
+
timer@20038000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x20038000 0x100>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 6399942..348d46b 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -118,6 +118,8 @@
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};
@@ -144,6 +146,19 @@
#reset-cells = <1>;
};
+ efuse: efuse@20010000 {
+ compatible = "rockchip,rockchip-efuse";
+ reg = <0x20010000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cru PCLK_EFUSE>;
+ clock-names = "pclk_efuse";
+
+ cpu_leakage: cpu_leakage {
+ reg = <0x17 0x1>;
+ };
+ };
+
usbphy: phy {
compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy";
rockchip,grf = <&grf>;
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
new file mode 100644
index 0000000..e3898b8
--- /dev/null
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -0,0 +1,66 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3228.dtsi"
+
+/ {
+ model = "Rockchip RK3228 Evaluation board";
+ compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+};
+
+&emmc {
+ broken-cd;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ disable-wp;
+ non-removable;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk3228.dtsi
new file mode 100644
index 0000000..119ff12
--- /dev/null
+++ b/arch/arm/boot/dts/rk3228.dtsi
@@ -0,0 +1,442 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3228-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "rockchip,rk3228";
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@f00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf00>;
+ resets = <&cru SRST_CORE0>;
+ operating-points = <
+ /* KHz uV */
+ 816000 1000000
+ >;
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
+ };
+
+ cpu1: cpu@f01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf01>;
+ resets = <&cru SRST_CORE1>;
+ };
+
+ cpu2: cpu@f02 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf02>;
+ resets = <&cru SRST_CORE2>;
+ };
+
+ cpu3: cpu@f03 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf03>;
+ resets = <&cru SRST_CORE3>;
+ };
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma@110f0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x110f0000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ grf: syscon@11000000 {
+ compatible = "syscon";
+ reg = <0x11000000 0x1000>;
+ };
+
+ uart0: serial@11010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x11010000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@11020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x11020000 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@11030000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x11030000 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@110b0000 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0x110b0000 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@110b0010 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0x110b0010 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@110b0020 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0x110b0020 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@110b0030 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0x110b0030 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ status = "disabled";
+ };
+
+ timer: timer@110c0000 {
+ compatible = "rockchip,rk3288-timer";
+ reg = <0x110c0000 0x20>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>, <&cru PCLK_TIMER>;
+ clock-names = "timer", "pclk";
+ };
+
+ cru: clock-controller@110e0000 {
+ compatible = "rockchip,rk3228-cru";
+ reg = <0x110e0000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks = <&cru PLL_GPLL>;
+ assigned-clock-rates = <594000000>;
+ };
+
+ emmc: dwmmc@30020000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ reg = <0x30020000 0x4000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <37500000>;
+ clock-freq-min-max = <400000 37500000>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ bus-width = <8>;
+ default-sample-phase = <158>;
+ num-slots = <1>;
+ fifo-depth = <0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@32010000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0x32011000 0x1000>,
+ <0x32012000 0x1000>,
+ <0x32014000 0x2000>,
+ <0x32016000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3228-pinctrl";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0@11110000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x11110000 0x100>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1@11120000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x11120000 0x100>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2@11130000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x11130000 0x100>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3@11140000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x11140000 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+ <1 25 RK_FUNC_2 &pcfg_pull_none>,
+ <1 26 RK_FUNC_2 &pcfg_pull_none>,
+ <1 27 RK_FUNC_2 &pcfg_pull_none>,
+ <1 28 RK_FUNC_2 &pcfg_pull_none>,
+ <1 29 RK_FUNC_2 &pcfg_pull_none>,
+ <1 30 RK_FUNC_2 &pcfg_pull_none>,
+ <1 31 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>,
+ <2 27 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>,
+ <1 10 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart1_cts: uart1-cts {
+ rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart1_rts: uart1-rts {
+ rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+ <1 19 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ uart2_cts: uart2-cts {
+ rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart2_rts: uart2-rts {
+ rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 43949a6..452ca24 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -43,10 +43,26 @@
/ {
compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
-};
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
+ vcc_lcd: vcc-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_en>;
+ regulator-name = "vcc_lcd";
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_wl: vcc-wl {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_pwr>;
+ regulator-name = "vcc_wl";
+ vin-supply = <&vcc_18>;
+ };
};
&i2c0 {
@@ -119,8 +135,8 @@
vdd_log: REG3 {
regulator-name = "VDD_LOG";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
};
@@ -133,7 +149,7 @@
vccio_sd: REG5 {
regulator-name = "VCCIO_SD";
- regulator-min-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
@@ -152,7 +168,7 @@
regulator-always-on;
};
- vcca_tp: REG8 {
+ vcc_tp: REG8 {
regulator-name = "VCCA_TP";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -189,3 +205,17 @@
};
};
};
+
+&pinctrl {
+ lcd {
+ lcd_en: lcd-en {
+ rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_pwr: wifi-pwr {
+ rockchip,pins = <7 9 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 18eb6cb..736b08b 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -43,17 +43,6 @@
/ {
compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- #clock-cells = <0>;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
};
&i2c0 {
@@ -244,19 +233,3 @@
};
};
};
-
-&gmac {
- phy-supply = <&vcc_phy>;
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "ok";
-};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index f6d2e78..4faabdb 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -89,6 +89,13 @@
pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
};
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ #clock-cells = <0>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
@@ -160,6 +167,10 @@
};
};
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
&emmc {
broken-cd;
bus-width = <8>;
@@ -172,11 +183,6 @@
status = "okay";
};
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
@@ -191,6 +197,27 @@
vqmmc-supply = <&vccio_sd>;
};
+&gmac {
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rgmii";
+ clock_in_out = "input";
+ snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 14b9fc7..17f13c7 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -78,6 +78,13 @@
};
};
+ ir: ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_int>;
+ };
+
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
@@ -310,6 +317,12 @@
};
};
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
pmic {
pmic_int: pmic-int {
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 1813b7c3..1ece66f 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -109,6 +109,7 @@
act8846: act8846@5a {
compatible = "active-semi,act8846";
reg = <0x5a>;
+ system-power-controller;
inl1-supply = <&vcc_io>;
inl2-supply = <&vcc_sys>;
inl3-supply = <&vcc_20>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 8af35c8..c5453a0 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -49,6 +49,13 @@
stdout-path = "serial2:115200n8";
};
+ ir: ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_int>;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "SPDIF";
@@ -131,6 +138,12 @@
};
&pinctrl {
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
pmic {
pmic_int: pmic-int {
rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288-thermal.dtsi b/arch/arm/boot/dts/rk3288-thermal.dtsi
index 3404066..651b962 100644
--- a/arch/arm/boot/dts/rk3288-thermal.dtsi
+++ b/arch/arm/boot/dts/rk3288-thermal.dtsi
@@ -52,7 +52,7 @@
};
cpu_thermal: cpu_thermal {
- polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay-passive = <100>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
thermal-sensors = <&tsadc 1>;
@@ -63,6 +63,11 @@
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
+ cpu_alert1: cpu_alert1 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
cpu_crit: cpu_crit {
temperature = <90000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
@@ -74,13 +79,18 @@
map0 {
trip = <&cpu_alert0>;
cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT 6>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
gpu_thermal: gpu_thermal {
- polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay-passive = <100>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
thermal-sensors = <&tsadc 2>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts
new file mode 100644
index 0000000..cf5311d
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts
@@ -0,0 +1,139 @@
+/*
+ * Google Veyron Brain Rev 0 board device tree source
+ *
+ * Copyright 2014 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron.dtsi"
+
+/ {
+ model = "Google Brain";
+ compatible = "google,veyron-brain-rev0", "google,veyron-brain",
+ "google,veyron", "rockchip,rk3288";
+
+ vcc33_sys: vcc33-sys {
+ vin-supply = <&vcc_5v>;
+ };
+
+ vcc33_io: vcc33_io {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc33_io";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc33_sys>;
+ /* This is gated by vcc_18 too */
+ };
+
+ /* This turns on vbus for host2 and otg (dwc2) */
+ vcc5_host2: vcc5-host2-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_pwr_en>;
+ regulator-name = "vcc5_host2";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&pinctrl {
+ hdmi {
+ vcc50_hdmi_en: vcc50-hdmi-en {
+ rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dvs_1: dvs-1 {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ usb-host {
+ usb2_pwr_en: usb2-pwr-en {
+ rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&rk808 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+ dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
+ <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+ /delete-property/ vcc6-supply;
+
+ regulators {
+ /* vcc33_io is sourced directly from vcc33_sys */
+ /delete-node/ LDO_REG1;
+
+ /* This is not a pwren anymore, but the real power supply */
+ vdd10_lcd: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-suspend-mem-disabled;
+ };
+
+ vcc18_hdmi: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc18_hdmi";
+ regulator-suspend-mem-disabled;
+ };
+ };
+};
+
+&vcc50_hdmi {
+ enable-active-high;
+ gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc50_hdmi_en>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
new file mode 100644
index 0000000..f36f6f4
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -0,0 +1,250 @@
+/*
+ * Google Veyron Mickey Rev 0 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron.dtsi"
+
+/ {
+ model = "Google Mickey";
+ compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
+ "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
+ "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
+ "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
+ "google,veyron-mickey-rev0", "google,veyron-mickey",
+ "google,veyron", "rockchip,rk3288";
+
+ vcc_5v: vcc-5v {
+ vin-supply = <&vcc33_sys>;
+ };
+
+ vcc33_io: vcc33_io {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc33_io";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc33_sys>;
+ };
+};
+
+&cpu_thermal {
+ /delete-node/ trips;
+ /delete-node/ cooling-maps;
+
+ trips {
+ cpu_alert_almost_warm: cpu_alert_almost_warm {
+ temperature = <63000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_warm: cpu_alert_warm {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_almost_hot: cpu_alert_almost_hot {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_hot: cpu_alert_hot {
+ temperature = <82000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_hotter: cpu_alert_hotter {
+ temperature = <84000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_very_hot: cpu_alert_very_hot {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * After 1st level, throttle the CPU down to as low as 1.4 GHz
+ * and don't let the GPU go faster than 400 MHz. Note that we
+ * won't throttle the GPU lower than 400 MHz due to CPU
+ * heat--we'll let the GPU do the rest itself.
+ */
+ cpu_warm_limit_cpu {
+ trip = <&cpu_alert_warm>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT 4>;
+ };
+
+ /*
+ * Add some discrete steps to help throttling system deal
+ * with the fact that there are two passive cooling devices:
+ * the CPU and the GPU.
+ *
+ * - 1.2 GHz - 1.0 GHz (almost hot)
+ * - 800 MHz (hot)
+ * - 800 MHz - 696 MHz (hotter)
+ * - 696 MHz - min (very hot)
+ *
+ * Note:
+ * - 800 MHz appears to be a "sweet spot" for me. I can run
+ * some pretty serious workload here and be happy.
+ * - After 696 MHz we stop lowering voltage, so throttling
+ * past there is less effective.
+ */
+ cpu_almost_hot_limit_cpu {
+ trip = <&cpu_alert_almost_hot>;
+ cooling-device =
+ <&cpu0 5 6>;
+ };
+ cpu_hot_limit_cpu {
+ trip = <&cpu_alert_hot>;
+ cooling-device =
+ <&cpu0 7 7>;
+ };
+ cpu_hotter_limit_cpu {
+ trip = <&cpu_alert_hotter>;
+ cooling-device =
+ <&cpu0 7 8>;
+ };
+ cpu_very_hot_limit_cpu {
+ trip = <&cpu_alert_very_hot>;
+ cooling-device =
+ <&cpu0 8 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&emmc {
+ /delete-property/mmc-hs200-1_8v;
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c4 {
+ status = "disabled";
+};
+
+&i2s {
+ status = "okay";
+ clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
+ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
+};
+
+&rk808 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+ dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+ <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+ /delete-property/ vcc6-supply;
+ /delete-property/ vcc12-supply;
+
+ vcc11-supply = <&vcc33_sys>;
+
+ regulators {
+ /* vcc33_io is sourced directly from vcc33_sys */
+ /delete-node/ LDO_REG1;
+ /delete-node/ LDO_REG7;
+
+ /* This is not a pwren anymore, but the real power supply */
+ vdd10_lcd: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-suspend-mem-disabled;
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-suspend-mem-disabled;
+ };
+ };
+};
+
+&pinctrl {
+ hdmi {
+ power_hdmi_on: power-hdmi-on {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dvs_1: dvs-1 {
+ rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&usb_host0_ehci {
+ status = "disabled";
+};
+
+&usb_host1 {
+ status = "disabled";
+};
+
+&vcc50_hdmi {
+ enable-active-high;
+ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_hdmi_on>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 85f0373..699beb0 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -121,6 +121,18 @@
clock-frequency = <400000>;
i2c-scl-falling-time-ns = <50>;
i2c-scl-rising-time-ns = <300>;
+
+ touchscreen@10 {
+ compatible = "elan,ekth3500";
+ reg = <0x10>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_int &touch_rst>;
+ reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ vcc33-supply = <&vcc33_touch>;
+ vccio-supply = <&vcc33_touch>;
+ };
};
&rk808 {
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index a7ea7d0..b34a7b5 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -88,6 +88,14 @@
};
};
+&cpu_alert0 {
+ temperature = <65000>;
+};
+
+&cpu_alert1 {
+ temperature = <70000>;
+};
+
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 5e61f07..9fce91f 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -340,6 +340,11 @@
i2c-scl-rising-time-ns = <1000>;
};
+&power {
+ assigned-clocks = <&cru SCLK_EDP_24M>;
+ assigned-clock-parents = <&xin24m>;
+};
+
&pwm1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 04ea209..8ac49f3 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -53,6 +53,7 @@
interrupt-parent = <&gic>;
aliases {
+ ethernet0 = &gmac;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
@@ -777,9 +778,23 @@
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};
+ crypto: cypto-controller@ff8a0000 {
+ compatible = "rockchip,rk3288-crypto";
+ reg = <0xff8a0000 0x4000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
+ <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
+ clock-names = "aclk", "hclk", "sclk", "apb_pclk";
+ resets = <&cru SRST_CRYPTO>;
+ reset-names = "crypto-rst";
+ status = "okay";
+ };
+
vopb: vop@ff930000 {
compatible = "rockchip,rk3288-vop";
reg = <0xff930000 0x19c>;
@@ -886,6 +901,19 @@
interrupts = <GIC_PPI 9 0xf04>;
};
+ efuse: efuse@ffb40000 {
+ compatible = "rockchip,rockchip-efuse";
+ reg = <0xffb40000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cru PCLK_EFUSE256>;
+ clock-names = "pclk_efuse";
+
+ cpu_leakage: cpu_leakage@17 {
+ reg = <0x17 0x1>;
+ };
+ };
+
usbphy: phy {
compatible = "rockchip,rk3288-usb-phy";
rockchip,grf = <&grf>;
@@ -1144,7 +1172,7 @@
rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>;
};
- sdmmc_cd: sdmcc-cd {
+ sdmmc_cd: sdmmc-cd {
rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>;
};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 4497d28..99eeea7 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -49,6 +49,7 @@
interrupt-parent = <&gic>;
aliases {
+ ethernet0 = &emac;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 7fc5602..aa8bae3 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -147,7 +147,7 @@
gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
label = "SW1";
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index ff7c8f2..3a6056f 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -28,6 +28,7 @@
reg = <0>;
clock-frequency = <1196000000>;
power-domains = <&pd_a2sl>;
+ next-level-cache = <&L2>;
};
cpu@1 {
device_type = "cpu";
@@ -35,6 +36,7 @@
reg = <1>;
clock-frequency = <1196000000>;
power-domains = <&pd_a2sl>;
+ next-level-cache = <&L2>;
};
};
@@ -53,6 +55,18 @@
<0xf0000100 0x100>;
};
+ L2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0xf0100000 0x1000>;
+ interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_a3sm>;
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ arm,shared-override;
+ cache-unified;
+ cache-level = <2>;
+ };
+
sbsc2: memory-controller@fb400000 {
compatible = "renesas,sbsc-sh73a0";
reg = <0xfb400000 0x400>;
@@ -259,6 +273,50 @@
status = "disabled";
};
+ msiof0: spi@e6e20000 {
+ compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+ reg = <0xe6e20000 0x0064>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks SH73A0_CLK_MSIOF0>;
+ power-domains = <&pd_a3sp>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6e10000 {
+ compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+ reg = <0xe6e10000 0x0064>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_MSIOF1>;
+ power-domains = <&pd_a3sp>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6e00000 {
+ compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+ reg = <0xe6e00000 0x0064>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_MSIOF2>;
+ power-domains = <&pd_a3sp>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c90000 {
+ compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+ reg = <0xe6c90000 0x0064>;
+ interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_MSIOF3>;
+ power-domains = <&pd_a3sp>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee100000 0x100>;
@@ -798,13 +856,13 @@
mstp0_clks: mstp0_clks@e6150130 {
compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xe6150130 4>, <0xe6150030 4>;
- clocks = <&cpg_clocks SH73A0_CLK_HP>;
+ clocks = <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>;
#clock-cells = <1>;
clock-indices = <
- SH73A0_CLK_IIC2
+ SH73A0_CLK_IIC2 SH73A0_CLK_MSIOF0
>;
clock-output-names =
- "iic2";
+ "iic2", "msiof0";
};
mstp1_clks: mstp1_clks@e6150134 {
compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -834,20 +892,24 @@
reg = <0xe6150138 4>, <0xe6150040 4>;
clocks = <&sub_clk>, <&cpg_clocks SH73A0_CLK_HP>,
<&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>,
- <&sub_clk>, <&sub_clk>, <&sub_clk>, <&sub_clk>,
- <&sub_clk>, <&sub_clk>;
+ <&sub_clk>, <&sub_clk>, <&sub_clk>,
+ <&sub_clk>, <&sub_clk>, <&sub_clk>,
+ <&sub_clk>, <&sub_clk>, <&sub_clk>;
#clock-cells = <1>;
clock-indices = <
SH73A0_CLK_SCIFA7 SH73A0_CLK_SY_DMAC
- SH73A0_CLK_MP_DMAC SH73A0_CLK_SCIFA5
- SH73A0_CLK_SCIFB SH73A0_CLK_SCIFA0
- SH73A0_CLK_SCIFA1 SH73A0_CLK_SCIFA2
- SH73A0_CLK_SCIFA3 SH73A0_CLK_SCIFA4
+ SH73A0_CLK_MP_DMAC SH73A0_CLK_MSIOF3
+ SH73A0_CLK_MSIOF1 SH73A0_CLK_SCIFA5
+ SH73A0_CLK_SCIFB SH73A0_CLK_MSIOF2
+ SH73A0_CLK_SCIFA0 SH73A0_CLK_SCIFA1
+ SH73A0_CLK_SCIFA2 SH73A0_CLK_SCIFA3
+ SH73A0_CLK_SCIFA4
>;
clock-output-names =
- "scifa7", "sy_dmac", "mp_dmac", "scifa5",
- "scifb", "scifa0", "scifa1", "scifa2",
- "scifa3", "scifa4";
+ "scifa7", "sy_dmac", "mp_dmac", "msiof3",
+ "msiof1", "scifa5", "scifb", "msiof2",
+ "scifa0", "scifa1", "scifa2", "scifa3",
+ "scifa4";
};
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 39c470e..3ed4abd 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -677,6 +677,7 @@
#size-cells = <0>;
clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
clock-names = "biu", "ciu";
+ status = "disabled";
};
ocram: sram@ffff0000 {
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index a75a666..3c88678 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -79,6 +79,7 @@
&mmc0 {
vmmc-supply = <®ulator_3_3v>;
vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
};
&usb1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
index 555e9ca..afea364 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
@@ -100,6 +100,7 @@
&mmc0 {
vmmc-supply = <®ulator_3_3v>;
vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
};
&uart0 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
new file mode 100644
index 0000000..f86f9c0
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "DENX MCV";
+ compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1 GiB */
+ };
+};
+
+&mmc0 { /* On-SoM eMMC */
+ bus-width = <8>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
new file mode 100644
index 0000000..7186a29
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5_mcv.dtsi"
+
+/ {
+ model = "DENX MCV EVK";
+ compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+ aliases {
+ ethernet0 = &gmac0;
+ stmpe-i2c0 = &stmpe1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&gmac0 {
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&gpio0 { /* GPIO 0 ... 28 */
+ status = "okay";
+};
+
+&gpio1 { /* GPIO 29 ... 57 */
+ status = "okay";
+};
+
+&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ speed-mode = <0>;
+
+ stmpe1: stmpe811@41 {
+ compatible = "st,stmpe811";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ id = <0>;
+ blocks = <0x5>;
+ irq-gpio = <&portb 28 0x4>; /* GPIO 57, trig. level HI */
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ reg = <0>;
+ ts,sample-time = <4>;
+ ts,mod-12b = <1>;
+ ts,ref-sel = <0>;
+ ts,adc-freq = <1>;
+ ts,ave-ctrl = <1>;
+ ts,touch-det-delay = <3>;
+ ts,settling = <4>;
+ ts,fraction-z = <7>;
+ ts,i-drive = <1>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index d4d0a28..15e43f4 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -84,6 +84,7 @@
cd-gpios = <&portb 18 0>;
vmmc-supply = <®ulator_3_3v>;
vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
};
&usb1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 48bf651..b61f22f 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -80,6 +80,7 @@
&mmc0 {
vmmc-supply = <®ulator_3_3v>;
vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
};
&usb1 {
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 50f5e9d..341f5b7 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -512,63 +512,51 @@
// DB8500_REGULATOR_VAPE
db8500_vape_reg: db8500_vape {
- regulator-compatible = "db8500_vape";
regulator-always-on;
};
// DB8500_REGULATOR_VARM
db8500_varm_reg: db8500_varm {
- regulator-compatible = "db8500_varm";
};
// DB8500_REGULATOR_VMODEM
db8500_vmodem_reg: db8500_vmodem {
- regulator-compatible = "db8500_vmodem";
};
// DB8500_REGULATOR_VPLL
db8500_vpll_reg: db8500_vpll {
- regulator-compatible = "db8500_vpll";
};
// DB8500_REGULATOR_VSMPS1
db8500_vsmps1_reg: db8500_vsmps1 {
- regulator-compatible = "db8500_vsmps1";
};
// DB8500_REGULATOR_VSMPS2
db8500_vsmps2_reg: db8500_vsmps2 {
- regulator-compatible = "db8500_vsmps2";
};
// DB8500_REGULATOR_VSMPS3
db8500_vsmps3_reg: db8500_vsmps3 {
- regulator-compatible = "db8500_vsmps3";
};
// DB8500_REGULATOR_VRF1
db8500_vrf1_reg: db8500_vrf1 {
- regulator-compatible = "db8500_vrf1";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSP
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
- regulator-compatible = "db8500_sva_mmdsp";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
- regulator-compatible = "db8500_sva_mmdsp_ret";
};
// DB8500_REGULATOR_SWITCH_SVAPIPE
db8500_sva_pipe_reg: db8500_sva_pipe {
- regulator-compatible = "db8500_sva_pipe";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSP
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
- regulator-compatible = "db8500_sia_mmdsp";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
@@ -577,39 +565,32 @@
// DB8500_REGULATOR_SWITCH_SIAPIPE
db8500_sia_pipe_reg: db8500_sia_pipe {
- regulator-compatible = "db8500_sia_pipe";
};
// DB8500_REGULATOR_SWITCH_SGA
db8500_sga_reg: db8500_sga {
- regulator-compatible = "db8500_sga";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_B2R2_MCDE
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
- regulator-compatible = "db8500_b2r2_mcde";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_ESRAM12
db8500_esram12_reg: db8500_esram12 {
- regulator-compatible = "db8500_esram12";
};
// DB8500_REGULATOR_SWITCH_ESRAM12RET
db8500_esram12_ret_reg: db8500_esram12_ret {
- regulator-compatible = "db8500_esram12_ret";
};
// DB8500_REGULATOR_SWITCH_ESRAM34
db8500_esram34_reg: db8500_esram34 {
- regulator-compatible = "db8500_esram34";
};
// DB8500_REGULATOR_SWITCH_ESRAM34RET
db8500_esram34_ret_reg: db8500_esram34_ret {
- regulator-compatible = "db8500_esram34_ret";
};
};
@@ -721,7 +702,6 @@
compatible = "stericsson,ab8500-ext-regulator";
ab8500_ext1_reg: ab8500_ext1 {
- regulator-compatible = "ab8500_ext1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -729,7 +709,6 @@
};
ab8500_ext2_reg: ab8500_ext2 {
- regulator-compatible = "ab8500_ext2";
regulator-min-microvolt = <1360000>;
regulator-max-microvolt = <1360000>;
regulator-boot-on;
@@ -737,7 +716,6 @@
};
ab8500_ext3_reg: ab8500_ext3 {
- regulator-compatible = "ab8500_ext3";
regulator-min-microvolt = <3400000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
@@ -750,7 +728,6 @@
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
- regulator-compatible = "ab8500_ldo_aux1";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
@@ -760,56 +737,46 @@
// supplies to the on-board eMMC
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
- regulator-compatible = "ab8500_ldo_aux2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for VAUX3; SDcard slots
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
- regulator-compatible = "ab8500_ldo_aux3";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for v-intcore12; VINTCORE12 LDO
ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
- regulator-compatible = "ab8500_ldo_intcore";
};
// supply for tvout; gpadc; TVOUT LDO
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
- regulator-compatible = "ab8500_ldo_tvout";
};
// supply for ab8500-usb; USB LDO
ab8500_ldo_usb_reg: ab8500_ldo_usb {
- regulator-compatible = "ab8500_ldo_usb";
};
// supply for ab8500-vaudio; VAUDIO LDO
ab8500_ldo_audio_reg: ab8500_ldo_audio {
- regulator-compatible = "ab8500_ldo_audio";
};
// supply for v-anamic1 VAMIC1 LDO
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
- regulator-compatible = "ab8500_ldo_anamic1";
};
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
- regulator-compatible = "ab8500_ldo_anamic2";
};
// supply for v-dmic; VDMIC LDO
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
- regulator-compatible = "ab8500_ldo_dmic";
};
// supply for U8500 CSI/DSI; VANA LDO
ab8500_ldo_ana_reg: ab8500_ldo_ana {
- regulator-compatible = "ab8500_ldo_ana";
};
};
};
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index 78b7525..c3987ad 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -114,6 +114,8 @@
rohm,touch-max-x = <384>;
rohm,touch-max-y = <704>;
rohm,flip-y;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_rohm_mode>;
};
bu21013_tp@5d {
@@ -124,6 +126,8 @@
rohm,touch-max-x = <384>;
rohm,touch-max-y = <704>;
rohm,flip-y;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_rohm_mode>;
};
};
@@ -166,6 +170,25 @@
};
};
};
+ touch {
+ touch_rohm_mode: touch_rohm {
+ /*
+ * ROHM touch screen uses GPIO 143 for
+ * RST1, GPIO 146 for RST2 and
+ * GPIO 67 for interrupts. Pull-up
+ * the IRQ line and drive both
+ * reset signals low.
+ */
+ stuib_cfg1 {
+ pins = "GPIO143_D12", "GPIO146_D13";
+ ste,config = <&gpio_out_lo>;
+ };
+ stuib_cfg2 {
+ pins = "GPIO67_G2";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 0e1c969..b7b4211 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -66,7 +66,7 @@
keypad,num-columns = <8>;
keypad,num-rows = <8>;
linux,no-autorepeat;
- linux,wakeup;
+ wakeup-source;
linux,keymap = <0x0301006b
0x04010066
0x06040072
@@ -104,13 +104,40 @@
<19 IRQ_TYPE_EDGE_RISING>;
};
lsm303dlh@1e {
- /* Magnetometer */
+ /*
+ * This magnetometer is packaged with
+ * the accelerometer, and has a DRDY line,
+ * however it is not connected on this
+ * board so it can not generate interrupts.
+ */
compatible = "st,lsm303dlh-magn";
reg = <0x1e>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
+ };
+ lis331dl@1c {
+ /* Accelerometer */
+ compatible = "st,lis331dl-accel";
+ st,drdy-int-pin = <1>;
+ reg = <0x1c>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
- pinctrl-0 = <&magneto_tvk_mode>;
+ pinctrl-0 = <&accel_tvk_mode>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+ <19 IRQ_TYPE_EDGE_RISING>;
+ };
+ ak8974@0f {
+ /* Magnetometer */
+ compatible = "asahi-kasei,ak8974";
+ reg = <0x0f>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gyro_magn_tvk_mode>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
};
l3g4200d@68 {
/* Gyroscope */
@@ -119,6 +146,10 @@
reg = <0x68>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gyro_magn_tvk_mode>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
};
lsp001wm@5c {
/* Barometer/pressure sensor */
@@ -159,17 +190,22 @@
/* Accelerometer interrupt lines 1 & 2 */
tvk_cfg {
pins = "GPIO82_C1", "GPIO83_D3";
- ste,config = <&gpio_in_pu>;
+ ste,config = <&gpio_in_pd>;
};
};
};
- magnetometer {
- magneto_tvk_mode: magneto_tvk {
- /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+ gyroscope {
+ /*
+ * These lines are shared between Gyroscope l3g400dh
+ * and AK8974 magnetometer.
+ */
+ gyro_magn_tvk_mode: gyro_magn_tvk {
+ /* GPIO 31 used for INT pull down the line */
tvk_cfg1 {
pins = "GPIO31_V3";
- ste,config = <&gpio_in_pu>;
+ ste,config = <&gpio_in_pd>;
};
+ /* GPIO 32 used for DRDY, pull this down */
tvk_cfg2 {
pins = "GPIO32_V2";
ste,config = <&gpio_in_pd>;
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 9c2387b..149a72e 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -43,7 +43,6 @@
<&vaudio_hf_hrefv60_mode>,
<&gbf_hrefv60_mode>,
<&hdtv_hrefv60_mode>,
- <&touch_hrefv60_mode>,
<&gpios_hrefv60_mode>;
sdi0 {
@@ -190,23 +189,6 @@
};
};
};
- touch {
- touch_hrefv60_mode: touch_hrefv60 {
- /*
- * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
- * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
- * reset signals low.
- */
- hrefv60_cfg1 {
- pins = "GPIO143_D12", "GPIO146_D13";
- ste,config = <&gpio_out_lo>;
- };
- hrefv60_cfg2 {
- pins = "GPIO67_G2";
- ste,config = <&gpio_in_pu>;
- };
- };
- };
mcde {
lcd_hrefv60_mode: lcd_hrefv60 {
/*
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index 35282c0..7893290 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -163,7 +163,7 @@
label = "user_button";
gpios = <&gpio0 3 0x1>;
linux,code = <1>; /* KEY_ESC */
- gpio-key,wakeup;
+ wakeup-source;
pinctrl-names = "default";
pinctrl-0 = <&user_button_default_mode>;
};
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index e80e421..08f8207 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -281,7 +281,8 @@
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&magneto_snowball_mode>;
- gpios = <&gpio5 5 0x4>; /* DRDY line */
+ interrupt-parent = <&gpio5>;
+ interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */
};
l3g4200d@68 {
/* Gyroscope */
@@ -292,9 +293,9 @@
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&gyro_snowball_mode>;
- gpios = <&gpio5 6 0x4>; /* DRDY line */
interrupt-parent = <&gpio5>;
- interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
+ <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
};
lsp001wm@5c {
/* Barometer/pressure sensor */
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 82a6616..9c73ac2 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -315,21 +315,17 @@
ab3100-regulators {
compatible = "stericsson,ab3100-regulators";
ab3100_ldo_a_reg: ab3100_ldo_a {
- regulator-compatible = "ab3100_ldo_a";
startup-delay-us = <200>;
regulator-always-on;
regulator-boot-on;
};
ab3100_ldo_c_reg: ab3100_ldo_c {
- regulator-compatible = "ab3100_ldo_c";
startup-delay-us = <200>;
};
ab3100_ldo_d_reg: ab3100_ldo_d {
- regulator-compatible = "ab3100_ldo_d";
startup-delay-us = <200>;
};
ab3100_ldo_e_reg: ab3100_ldo_e {
- regulator-compatible = "ab3100_ldo_e";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
startup-delay-us = <200>;
@@ -337,7 +333,6 @@
regulator-boot-on;
};
ab3100_ldo_f_reg: ab3100_ldo_f {
- regulator-compatible = "ab3100_ldo_f";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
startup-delay-us = <600>;
@@ -345,28 +340,23 @@
regulator-boot-on;
};
ab3100_ldo_g_reg: ab3100_ldo_g {
- regulator-compatible = "ab3100_ldo_g";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <2850000>;
startup-delay-us = <400>;
};
ab3100_ldo_h_reg: ab3100_ldo_h {
- regulator-compatible = "ab3100_ldo_h";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2750000>;
startup-delay-us = <200>;
};
ab3100_ldo_k_reg: ab3100_ldo_k {
- regulator-compatible = "ab3100_ldo_k";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2750000>;
startup-delay-us = <200>;
};
ab3100_ext_reg: ab3100_ext {
- regulator-compatible = "ab3100_ext";
};
ab3100_buck_reg: ab3100_buck {
- regulator-compatible = "ab3100_buck";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1800000>;
startup-delay-us = <1000>;
diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
index 3f0aeb8..1d73a98 100644
--- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
@@ -65,12 +65,19 @@
/*
* TODO:
* 2x cameras via CSI
- * audio
+ * audio input
* AXP battery management
* NAND
* OTG
* Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
*/
+&codec {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
&ehci0 {
status = "okay";
@@ -86,15 +93,13 @@
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
};
};
+#include "axp209.dtsi"
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
@@ -110,7 +115,7 @@
};
&lradc {
- vref-supply = <®_vcc3v0>;
+ vref-supply = <®_ldo2>;
status = "okay";
@@ -146,6 +151,31 @@
status = "okay";
};
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
®_usb1_vbus {
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts
index 487ce63..e09053b 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts
@@ -47,6 +47,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "iNet-1";
@@ -56,11 +57,25 @@
serial0 = &uart0;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en_pin_inet>;
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <8>;
+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
};
+&codec {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <®_dcdc2>;
};
@@ -104,6 +119,19 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
+
+ ft5x: touchscreen@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_wake_pin>;
+ wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
+ touchscreen-size-x = <600>;
+ touchscreen-size-y = <1024>;
+ touchscreen-swapped-x-y;
+ };
};
&lradc {
@@ -151,6 +179,20 @@
};
&pio {
+ bl_en_pin_inet: bl_en_pin@0 {
+ allwinner,pins = "PH7";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ touchscreen_wake_pin: touchscreen_wake_pin@0 {
+ allwinner,pins = "PB13";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
@@ -166,6 +208,12 @@
};
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins_a>;
+ status = "okay";
+};
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
index 2fffc04..ca49b0d 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -59,6 +59,159 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ gpio_keys {
+ compatible = "gpio-keys-polled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_inet9f>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ button@0 {
+ label = "Left Joystick Left";
+ linux,code = <ABS_X>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
+ };
+
+ button@1 {
+ label = "Left Joystick Right";
+ linux,code = <ABS_X>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
+ };
+
+ button@2 {
+ label = "Left Joystick Up";
+ linux,code = <ABS_Y>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+ };
+
+ button@3 {
+ label = "Left Joystick Down";
+ linux,code = <ABS_Y>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+ };
+
+ button@4 {
+ label = "Right Joystick Left";
+ linux,code = <ABS_Z>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
+ };
+
+ button@5 {
+ label = "Right Joystick Right";
+ linux,code = <ABS_Z>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
+ };
+
+ button@6 {
+ label = "Right Joystick Up";
+ linux,code = <ABS_RZ>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
+ };
+
+ button@7 {
+ label = "Right Joystick Down";
+ linux,code = <ABS_RZ>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+ };
+
+ button@8 {
+ label = "DPad Left";
+ linux,code = <ABS_HAT0X>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
+ };
+
+ button@9 {
+ label = "DPad Right";
+ linux,code = <ABS_HAT0X>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+ };
+
+ button@10 {
+ label = "DPad Up";
+ linux,code = <ABS_HAT0Y>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <0xffffffff>; /* -1 */
+ gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+ };
+
+ button@11 {
+ label = "DPad Down";
+ linux,code = <ABS_HAT0Y>;
+ linux,input-type = <EV_ABS>;
+ linux,input-value = <1>;
+ gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+ };
+
+ button@12 {
+ label = "Button X";
+ linux,code = <BTN_X>;
+ gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
+ };
+
+ button@13 {
+ label = "Button Y";
+ linux,code = <BTN_Y>;
+ gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
+ };
+
+ button@14 {
+ label = "Button A";
+ linux,code = <BTN_A>;
+ gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+ };
+
+ button@15 {
+ label = "Button B";
+ linux,code = <BTN_B>;
+ gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
+ };
+
+ button@16 {
+ label = "Select Button";
+ linux,code = <BTN_SELECT>;
+ gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
+ };
+
+ button@17 {
+ label = "Start Button";
+ linux,code = <BTN_START>;
+ gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
+ };
+
+ button@18 {
+ label = "Top Left Button";
+ linux,code = <BTN_TL>;
+ gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+ };
+
+ button@19 {
+ label = "Top Right Button";
+ linux,code = <BTN_TR>;
+ gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
+ };
+ };
};
&cpu0 {
@@ -157,6 +310,17 @@
};
&pio {
+ key_pins_inet9f: key_pins@0 {
+ allwinner,pins = "PA0", "PA1", "PA3", "PA4",
+ "PA5", "PA6", "PA8", "PA9",
+ "PA11", "PA12", "PA13",
+ "PA14", "PA15", "PA16", "PA17",
+ "PH22", "PH23", "PH24", "PH25", "PH26";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
index 82e69c3..1f92ec7 100644
--- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
@@ -47,6 +47,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "Point of View Protab2-IPS9";
@@ -56,6 +57,16 @@
serial0 = &uart0;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en_pin_protab>;
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <8>;
+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -93,6 +104,22 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
+
+ pixcir_ts@5c {
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ compatible = "pixcir,pixcir_tangoc";
+ reg = <0x5c>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+ attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+ enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <1024>;
+ touchscreen-size-y = <768>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
};
&lradc {
@@ -129,6 +156,20 @@
};
&pio {
+ bl_en_pin_protab: bl_en_pin@0 {
+ allwinner,pins = "PH7";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ touchscreen_pins: touchscreen_pins@0 {
+ allwinner,pins = "PA5", "PB13";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
@@ -144,6 +185,12 @@
};
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins_a>;
+ status = "okay";
+};
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index aa90f31..2c8f5e6 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -66,7 +66,7 @@
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>;
+ <&ahb_gates 44>, <&dram_gates 26>;
status = "disabled";
};
@@ -75,7 +75,8 @@
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&ahb_gates 46>;
+ <&ahb_gates 44>, <&ahb_gates 46>,
+ <&dram_gates 25>, <&dram_gates 26>;
status = "disabled";
};
@@ -84,7 +85,8 @@
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
- <&ahb_gates 46>;
+ <&ahb_gates 46>, <&dram_gates 25>,
+ <&dram_gates 26>;
status = "disabled";
};
@@ -93,7 +95,8 @@
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>, <&ahb_gates 46>;
+ <&ahb_gates 44>, <&ahb_gates 46>,
+ <&dram_gates 25>, <&dram_gates 26>;
status = "disabled";
};
};
@@ -492,6 +495,40 @@
clock-output-names = "spi3";
};
+ dram_gates: clk@01c20100 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-dram-gates-clk";
+ reg = <0x01c20100 0x4>;
+ clocks = <&pll5 0>;
+ clock-indices = <0>,
+ <1>, <2>,
+ <3>,
+ <4>,
+ <5>, <6>,
+ <15>,
+ <24>, <25>,
+ <26>, <27>,
+ <28>, <29>;
+ clock-output-names = "dram_ve",
+ "dram_csi0", "dram_csi1",
+ "dram_ts",
+ "dram_tvd",
+ "dram_tve0", "dram_tve1",
+ "dram_output",
+ "dram_de_fe1", "dram_de_fe0",
+ "dram_de_be0", "dram_de_be1",
+ "dram_de_mp", "dram_ace";
+ };
+
+ ve_clk: clk@01c2013c {
+ #clock-cells = <0>;
+ #reset-cells = <0>;
+ compatible = "allwinner,sun4i-a10-ve-clk";
+ reg = <0x01c2013c 0x4>;
+ clocks = <&pll4>;
+ clock-output-names = "ve";
+ };
+
codec_clk: clk@01c20140 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-codec-clk";
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
index 2b3511e..a790ec8 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
@@ -86,6 +86,20 @@
status = "okay";
};
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp152: pmic@30 {
+ compatible = "x-powers,axp152";
+ reg = <0x30>;
+ interrupts = <0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
index eb793d5..5236c1e 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -47,11 +47,21 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "Utoo P66";
compatible = "utoo,p66", "allwinner,sun5i-a13";
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+ /* Note levels of 10 / 20% result in backlight off */
+ brightness-levels = <0 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <6>;
+ /* TODO: backlight uses axp gpio1 as enable pin */
+ };
+
i2c_lcd: i2c@0 {
/* The lcd panel i2c interface is hooked up via gpios */
compatible = "i2c-gpio";
@@ -201,6 +211,12 @@
};
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins>;
+ status = "okay";
+};
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
index b199020..360adfb 100644
--- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -113,18 +113,83 @@
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
-®_usb1_vbus {
- gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+&p2wi {
status = "okay";
+
+ axp22x: pmic@68 {
+ compatible = "x-powers,axp221";
+ reg = <0x68>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
};
-&usb1_vbus_pin_a {
- allwinner,pins = "PH27";
+#include "axp22x.dtsi"
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "avcc";
};
-&usbphy {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
+®_dc1sw {
+ regulator-name = "vcc-lcd-usb2";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+};
+
+®_dc5ldo {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpus";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+};
+
+®_dcdc2 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-gpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc4 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-sys-dll";
+};
+
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+/* Voltage source for I2C pullup resistors for I2C Bus 0 */
+®_dldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vddio-csi";
};
&uart0 {
@@ -132,3 +197,9 @@
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+
+&usbphy {
+ usb1_vbus-supply = <®_dldo1>;
+ usb2_vbus-supply = <®_dc1sw>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index fd7594f..67c8a76 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -92,6 +92,10 @@
status = "okay";
};
+&codec {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <®_dcdc2>;
operating-points = <
diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
new file mode 100644
index 0000000..f5b5325
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2015 Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "ICnova-A20 SWAC";
+ compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
index b7fe102..c3c626b 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
@@ -1,5 +1,6 @@
/*
* Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ * Copyright 2015 - Karsten Merker <merker@debian.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -45,6 +46,7 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
@@ -86,6 +88,10 @@
status = "okay";
};
+&codec {
+ status = "okay";
+};
+
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
@@ -110,6 +116,60 @@
};
};
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@190 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <190000>;
+ };
+
+ button@390 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <390000>;
+ };
+
+ button@600 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <600000>;
+ };
+
+ button@800 {
+ label = "Search";
+ linux,code = <KEY_SEARCH>;
+ channel = <0>;
+ voltage = <800000>;
+ };
+
+ button@980 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <980000>;
+ };
+
+ button@1180 {
+ label = "Esc";
+ linux,code = <KEY_ESC>;
+ channel = <0>;
+ voltage = <1180000>;
+ };
+
+ button@1400 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <1400000>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
@@ -120,6 +180,16 @@
status = "okay";
};
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
+ cd-inverted;
+ status = "okay";
+};
+
&ohci0 {
status = "okay";
};
@@ -142,6 +212,13 @@
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 {
+ allwinner,pins = "PH0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
};
®_ahci_5v {
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
index 4f65664..2be04c43 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -95,6 +95,10 @@
status = "okay";
};
+&codec {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
index 1757a6a..ddac732 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -82,6 +82,10 @@
status = "okay";
};
+&codec {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <®_dcdc2>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index 861a4a6..1a8b39b 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -111,6 +111,10 @@
allwinner,pins = "PH2";
};
+&codec {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <®_dcdc2>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
index 78239ad..239b5d2 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -62,6 +62,10 @@
};
};
+&codec {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <®_dcdc2>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e02eb72..0940a78 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -68,7 +68,7 @@
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>;
+ <&ahb_gates 44>, <&dram_gates 26>;
status = "disabled";
};
@@ -76,7 +76,8 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
+ <&dram_gates 26>;
status = "disabled";
};
@@ -85,7 +86,7 @@
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>;
+ <&ahb_gates 44>, <&dram_gates 26>;
status = "disabled";
};
};
@@ -501,6 +502,40 @@
clock-output-names = "spi3";
};
+ dram_gates: clk@01c20100 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-dram-gates-clk";
+ reg = <0x01c20100 0x4>;
+ clocks = <&pll5 0>;
+ clock-indices = <0>,
+ <1>, <2>,
+ <3>,
+ <4>,
+ <5>, <6>,
+ <15>,
+ <24>, <25>,
+ <26>, <27>,
+ <28>, <29>;
+ clock-output-names = "dram_ve",
+ "dram_csi0", "dram_csi1",
+ "dram_ts",
+ "dram_tvd",
+ "dram_tve0", "dram_tve1",
+ "dram_output",
+ "dram_de_fe1", "dram_de_fe0",
+ "dram_de_be0", "dram_de_be1",
+ "dram_de_mp", "dram_ace";
+ };
+
+ ve_clk: clk@01c2013c {
+ #clock-cells = <0>;
+ #reset-cells = <0>;
+ compatible = "allwinner,sun4i-a10-ve-clk";
+ reg = <0x01c2013c 0x4>;
+ clocks = <&pll4>;
+ clock-output-names = "ve";
+ };
+
codec_clk: clk@01c20140 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-codec-clk";
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 0c0964d..6f88fb0 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -56,7 +56,7 @@
#size-cells = <1>;
ranges;
- framebuffer@0 {
+ simplefb_lcd: framebuffer@0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
new file mode 100644
index 0000000..e67df59
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Xunlong Orange Pi Plus";
+ compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ cd-inverted;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
new file mode 100644
index 0000000..1524130e
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -0,0 +1,497 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: osc24M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+
+ pll1: clk@01c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll1";
+ };
+
+ /* dummy clock until actually implemented */
+ pll5: pll5_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "pll5";
+ };
+
+ pll6: clk@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun6i-a31-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6", "pll6x2";
+ };
+
+ pll6d2: pll6d2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&pll6 0>;
+ clock-output-names = "pll6d2";
+ };
+
+ /* dummy clock until pll6 can be reused */
+ pll8: pll8_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <1>;
+ clock-output-names = "pll8";
+ };
+
+ cpu: cpu_clk@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-cpu-clk";
+ reg = <0x01c20050 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+ clock-output-names = "cpu";
+ };
+
+ axi: axi_clk@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-axi-clk";
+ reg = <0x01c20050 0x4>;
+ clocks = <&cpu>;
+ clock-output-names = "axi";
+ };
+
+ ahb1: ahb1_clk@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun6i-a31-ahb1-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+ clock-output-names = "ahb1";
+ };
+
+ ahb2: ahb2_clk@01c2005c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-h3-ahb2-clk";
+ reg = <0x01c2005c 0x4>;
+ clocks = <&ahb1>, <&pll6d2>;
+ clock-output-names = "ahb2";
+ };
+
+ apb1: apb1_clk@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb0-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&ahb1>;
+ clock-output-names = "apb1";
+ };
+
+ apb2: apb2_clk@01c20058 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb1-clk";
+ reg = <0x01c20058 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+ clock-output-names = "apb2";
+ };
+
+ bus_gates: clk@01c20060 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-h3-bus-gates-clk";
+ reg = <0x01c20060 0x14>;
+ clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
+ clock-names = "ahb1", "ahb2", "apb1", "apb2";
+ clock-indices = <5>, <6>, <8>,
+ <9>, <10>, <13>,
+ <14>, <17>, <18>,
+ <19>, <20>,
+ <21>, <23>,
+ <24>, <25>,
+ <26>, <27>,
+ <28>, <29>,
+ <30>, <31>, <32>,
+ <35>, <36>, <37>,
+ <40>, <41>, <43>,
+ <44>, <52>, <53>,
+ <54>, <64>,
+ <65>, <69>, <72>,
+ <76>, <77>, <78>,
+ <96>, <97>, <98>,
+ <112>, <113>,
+ <114>, <115>,
+ <116>, <128>, <135>;
+ clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
+ "bus_mmc1", "bus_mmc2", "bus_nand",
+ "bus_sdram", "bus_gmac", "bus_ts",
+ "bus_hstimer", "bus_spi0",
+ "bus_spi1", "bus_otg",
+ "bus_otg_ehci0", "bus_ehci1",
+ "bus_ehci2", "bus_ehci3",
+ "bus_otg_ohci0", "bus_ohci1",
+ "bus_ohci2", "bus_ohci3", "bus_ve",
+ "bus_lcd0", "bus_lcd1", "bus_deint",
+ "bus_csi", "bus_tve", "bus_hdmi",
+ "bus_de", "bus_gpu", "bus_msgbox",
+ "bus_spinlock", "bus_codec",
+ "bus_spdif", "bus_pio", "bus_ths",
+ "bus_i2s0", "bus_i2s1", "bus_i2s2",
+ "bus_i2c0", "bus_i2c1", "bus_i2c2",
+ "bus_uart0", "bus_uart1",
+ "bus_uart2", "bus_uart3",
+ "bus_scr", "bus_ephy", "bus_dbg";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clock-output-names = "mmc0",
+ "mmc0_output",
+ "mmc0_sample";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clock-output-names = "mmc1",
+ "mmc1_output",
+ "mmc1_sample";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clock-output-names = "mmc2",
+ "mmc2_output",
+ "mmc2_sample";
+ };
+
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-mbus-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5>;
+ clock-output-names = "mbus";
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dma: dma-controller@01c02000 {
+ compatible = "allwinner,sun8i-h3-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 6>;
+ resets = <&ahb_rst 6>;
+ #dma-cells = <1>;
+ };
+
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&bus_gates 8>,
+ <&mmc0_clk 0>,
+ <&mmc0_clk 1>,
+ <&mmc0_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ resets = <&ahb_rst 8>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&bus_gates 9>,
+ <&mmc1_clk 0>,
+ <&mmc1_clk 1>,
+ <&mmc1_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ resets = <&ahb_rst 9>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&bus_gates 10>,
+ <&mmc2_clk 0>,
+ <&mmc2_clk 1>,
+ <&mmc2_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ resets = <&ahb_rst 10>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pio: pinctrl@01c20800 {
+ compatible = "allwinner,sun8i-h3-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 69>;
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PA4", "PA5";
+ allwinner,function = "uart0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+ "PF4", "PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin: mmc0_cd_pin@0 {
+ allwinner,pins = "PF6";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ mmc1_pins_a: mmc1@0 {
+ allwinner,pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ allwinner,function = "mmc1";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
+ ahb_rst: reset@01c202c0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-ahb1-reset";
+ reg = <0x01c202c0 0xc>;
+ };
+
+ apb1_rst: reset@01c202d0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202d0 0x4>;
+ };
+
+ apb2_rst: reset@01c202d8 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202d8 0x4>;
+ };
+
+ timer@01c20c00 {
+ compatible = "allwinner,sun4i-a10-timer";
+ reg = <0x01c20c00 0xa0>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
+ wdt0: watchdog@01c20ca0 {
+ compatible = "allwinner,sun6i-a31-wdt";
+ reg = <0x01c20ca0 0x20>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&bus_gates 112>;
+ resets = <&apb2_rst 16>;
+ dmas = <&dma 6>, <&dma 6>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&bus_gates 113>;
+ resets = <&apb2_rst 17>;
+ dmas = <&dma 7>, <&dma 7>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial@01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&bus_gates 114>;
+ resets = <&apb2_rst 18>;
+ dmas = <&dma 8>, <&dma 8>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&bus_gates 115>;
+ resets = <&apb2_rst 19>;
+ dmas = <&dma 9>, <&dma 9>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@01c81000 {
+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x1000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ rtc: rtc@01f00000 {
+ compatible = "allwinner,sun6i-a31-rtc";
+ reg = <0x01f00000 0x54>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 6484dcf..382bd9f 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -62,9 +62,31 @@
stdout-path = "serial0:115200n8";
};
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_cubieboard4>;
+
+ green {
+ label = "cubieboard4:green:usr";
+ gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
+ };
+
+ red {
+ label = "cubieboard4:red:usr";
+ gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ };
+ };
};
&pio {
+ led_pins_cubieboard4: led-pins@0 {
+ allwinner,pins = "PH6", "PH17";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
allwinner,pins = "PH18";
allwinner,function = "gpio_in";
@@ -92,6 +114,14 @@
status = "okay";
};
+&r_ir {
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 6ce4b5e..c0060e4 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -65,7 +65,7 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&led_pins_optimus>;
+ pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;
/* The LED names match those found on the board */
@@ -74,7 +74,10 @@
gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
};
- /* led3 is on PM15, in R_PIO */
+ led3 {
+ label = "optimus:led3:usr";
+ gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */
+ };
led4 {
label = "optimus:led4:usr";
@@ -180,6 +183,23 @@
status = "okay";
};
+&r_ir {
+ status = "okay";
+};
+
+&r_pio {
+ led_r_pins_optimus: led-pins@1 {
+ allwinner,pins = "PM15";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&r_rsb {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 1118bf5..e838f20 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -128,6 +128,17 @@
*/
ranges = <0 0 0 0x20000000>;
+ /*
+ * This clock is actually configurable from the PRCM address
+ * space. The external 24M oscillator can be turned off, and
+ * the clock switched to an internal 16M RC oscillator. Under
+ * normal operation there's no reason to do this, and the
+ * default is to use the external good one, so just model this
+ * as a fixed clock. Also it is not entirely clear if the
+ * osc24M mux in the PRCM affects the entire clock tree, which
+ * would also throw all the PLL clock rates off, or just the
+ * downstream clocks in the PRCM.
+ */
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -135,6 +146,13 @@
clock-output-names = "osc24M";
};
+ /*
+ * The 32k clock is from an external source, normally the
+ * AC100 codec/RTC chip. This clock is by default enabled
+ * and clocked at 32768 Hz, from the oscillator connected
+ * to the AC100. It is configurable, but no such driver or
+ * bindings exist yet.
+ */
osc32k: osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -164,6 +182,14 @@
"usb_phy2", "usb_hsic_12M";
};
+ pll3: clk@06000008 {
+ /* placeholder until implemented */
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-rate = <0>;
+ clock-output-names = "pll3";
+ };
+
pll4: clk@0600000c {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-pll4-clk";
@@ -350,6 +376,68 @@
"apb1_uart2", "apb1_uart3",
"apb1_uart4", "apb1_uart5";
};
+
+ cpus_clk: clk@08001410 {
+ compatible = "allwinner,sun9i-a80-cpus-clk";
+ reg = <0x08001410 0x4>;
+ #clock-cells = <0>;
+ clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
+ clock-output-names = "cpus";
+ };
+
+ ahbs: ahbs_clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&cpus_clk>;
+ clock-output-names = "ahbs";
+ };
+
+ apbs: clk@0800141c {
+ compatible = "allwinner,sun8i-a23-apb0-clk";
+ reg = <0x0800141c 0x4>;
+ #clock-cells = <0>;
+ clocks = <&ahbs>;
+ clock-output-names = "apbs";
+ };
+
+ apbs_gates: clk@08001428 {
+ compatible = "allwinner,sun9i-a80-apbs-gates-clk";
+ reg = <0x08001428 0x4>;
+ #clock-cells = <1>;
+ clocks = <&apbs>;
+ clock-indices = <0>, <1>,
+ <2>, <3>,
+ <4>, <5>,
+ <6>, <7>,
+ <12>, <13>,
+ <16>, <17>,
+ <18>, <20>;
+ clock-output-names = "apbs_pio", "apbs_ir",
+ "apbs_timer", "apbs_rsb",
+ "apbs_uart", "apbs_1wire",
+ "apbs_i2c0", "apbs_i2c1",
+ "apbs_ps2_0", "apbs_ps2_1",
+ "apbs_dma", "apbs_i2s0",
+ "apbs_i2s1", "apbs_twd";
+ };
+
+ r_1wire_clk: clk@08001450 {
+ reg = <0x08001450 0x4>;
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ clocks = <&osc32k>, <&osc24M>;
+ clock-output-names = "r_1wire";
+ };
+
+ r_ir_clk: clk@08001454 {
+ reg = <0x08001454 0x4>;
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ clocks = <&osc32k>, <&osc24M>;
+ clock-output-names = "r_ir";
+ };
};
soc {
@@ -764,14 +852,83 @@
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
};
+ apbs_rst: reset@080014b0 {
+ reg = <0x080014b0 0x4>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ #reset-cells = <1>;
+ };
+
+ nmi_intc: interrupt-controller@080015a0 {
+ compatible = "allwinner,sun9i-a80-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x080015a0 0xc>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ r_ir: ir@08002000 {
+ compatible = "allwinner,sun5i-a13-ir";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_pins>;
+ clocks = <&apbs_gates 1>, <&r_ir_clk>;
+ clock-names = "apb", "ir";
+ resets = <&apbs_rst 1>;
+ reg = <0x08002000 0x40>;
+ status = "disabled";
+ };
+
r_uart: serial@08002800 {
compatible = "snps,dw-apb-uart";
reg = <0x08002800 0x400>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&osc24M>;
+ clocks = <&apbs_gates 4>;
+ resets = <&apbs_rst 4>;
status = "disabled";
};
+
+ r_pio: pinctrl@08002c00 {
+ compatible = "allwinner,sun9i-a80-r-pinctrl";
+ reg = <0x08002c00 0x400>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbs_gates 0>;
+ resets = <&apbs_rst 0>;
+ gpio-controller;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #gpio-cells = <3>;
+
+ r_ir_pins: r_ir {
+ allwinner,pins = "PL6";
+ allwinner,function = "s_cir_rx";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ r_rsb_pins: r_rsb {
+ allwinner,pins = "PN0", "PN1";
+ allwinner,function = "s_rsb";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+ };
+
+ r_rsb: i2c@08003400 {
+ compatible = "allwinner,sun8i-a23-rsb";
+ reg = <0x08003400 0x400>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbs_gates 3>;
+ clock-frequency = <3000000>;
+ resets = <&apbs_rst 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_rsb_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
};
diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi
deleted file mode 100644
index a632724..0000000
--- a/arch/arm/boot/dts/tps65217.dtsi
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/tps65217.pdf
- */
-
-&tps {
- compatible = "ti,tps65217";
-
- regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- dcdc1_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "dcdc1";
- };
-
- dcdc2_reg: regulator@1 {
- reg = <1>;
- regulator-compatible = "dcdc2";
- };
-
- dcdc3_reg: regulator@2 {
- reg = <2>;
- regulator-compatible = "dcdc3";
- };
-
- ldo1_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "ldo1";
- };
-
- ldo2_reg: regulator@4 {
- reg = <4>;
- regulator-compatible = "ldo2";
- };
-
- ldo3_reg: regulator@5 {
- reg = <5>;
- regulator-compatible = "ldo3";
- };
-
- ldo4_reg: regulator@6 {
- reg = <6>;
- regulator-compatible = "ldo4";
- };
- };
-};
diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi
index 3537ae5..5288e6d 100644
--- a/arch/arm/boot/dts/twl4030_omap3.dtsi
+++ b/arch/arm/boot/dts/twl4030_omap3.dtsi
@@ -19,7 +19,7 @@
*/
twl4030_pins: pinmux_twl4030_pins {
pinctrl-single,pins = <
- 0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+ OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
>;
};
};
diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi
index a4fa570..e373f59 100644
--- a/arch/arm/boot/dts/twl6030_omap4.dtsi
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -24,7 +24,7 @@
&omap4_pmx_wkup {
twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
pinctrl-single,pins = <
- 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
+ OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
>;
};
};
@@ -32,7 +32,7 @@
&omap4_pmx_core {
twl6030_pins: pinmux_twl6030_pins {
pinctrl-single,pins = <
- 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */
+ OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */
>;
};
};
diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi
new file mode 100644
index 0000000..ea9301a
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-common32.dtsi
@@ -0,0 +1,135 @@
+/*
+ * Device Tree Source commonly used by UniPhier ARM SoCs
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ serial0: serial@54006800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ interrupts = <0 33 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&uart_clk>;
+ };
+
+ serial1: serial@54006900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ interrupts = <0 35 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&uart_clk>;
+ };
+
+ serial2: serial@54006a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ interrupts = <0 37 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ clocks = <&uart_clk>;
+ };
+
+ serial3: serial@54006b00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006b00 0x40>;
+ interrupts = <0 177 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ clocks = <&uart_clk>;
+ };
+
+ system-bus-controller@58c00000 {
+ compatible = "socionext,uniphier-system-bus-controller";
+ reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ };
+
+ pinctrl: pinctrl@5f801000 {
+ /* specify compatible in each SoC DTSI */
+ reg = <0x5f801000 0xe00>;
+ };
+ };
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
index af49381..34f0d8d 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -42,7 +42,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,ph1-ld4";
@@ -78,188 +78,105 @@
clock-frequency = <100000000>;
};
};
-
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
-
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- l2: l2-cache@500c0000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
- <0x506c0000 0x400>;
- interrupts = <0 174 4>, <0 175 4>;
- cache-unified;
- cache-size = <(512 * 1024)>;
- cache-sets = <256>;
- cache-line-size = <128>;
- cache-level = <2>;
- };
-
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
-
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
-
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
-
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 29 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
-
- i2c0: i2c@58400000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58400000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- i2c1: i2c@58480000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58480000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- /* chip-internal connection for DMD */
- i2c2: i2c@58500000 {
- compatible = "socionext,uniphier-i2c";
- reg = <0x58500000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <400000>;
- };
-
- i2c3: i2c@58580000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58580000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- system-bus-controller@58c00000 {
- compatible = "socionext,uniphier-system-bus-controller";
- reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
- };
-
- usb0: usb@5a800100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a800100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0>;
- interrupts = <0 80 4>;
- };
-
- usb1: usb@5a810100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a810100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb1>;
- interrupts = <0 81 4>;
- };
-
- usb2: usb@5a820100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a820100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb2>;
- interrupts = <0 82 4>;
- };
-
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-ld4-pinctrl",
- "syscon";
- reg = <0x5f801000 0xe00>;
- };
-
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0x104>;
- clocks = <&arm_timer_clk>;
- };
-
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0x104>;
- clocks = <&arm_timer_clk>;
- };
-
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
- };
};
-/include/ "uniphier-pinctrl.dtsi"
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(512 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
+ i2c0: i2c@58400000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58400000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 41 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58480000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ /* chip-internal connection for DMD */
+ i2c2: i2c@58500000 {
+ compatible = "socionext,uniphier-i2c";
+ reg = <0x58500000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <400000>;
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58580000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ usb0: usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ interrupts = <0 80 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ };
+
+ usb1: usb@5a810100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ interrupts = <0 81 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ };
+
+ usb2: usb@5a820100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a820100 0x100>;
+ interrupts = <0 82 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ };
+
+};
+
+&serial3 {
+ interrupts = <0 29 4>;
+};
+
+&pinctrl {
+ compatible = "socionext,ph1-ld4-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
index 254642f..d78142f 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -42,7 +42,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,ph1-pro4";
@@ -86,203 +86,115 @@
clock-frequency = <50000000>;
};
};
+};
- soc {
- compatible = "simple-bus";
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(768 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
#address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
+ #size-cells = <0>;
+ interrupts = <0 41 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
+ i2c1: i2c@58781000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- l2: l2-cache@500c0000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
- <0x506c0000 0x400>;
- interrupts = <0 174 4>, <0 175 4>;
- cache-unified;
- cache-size = <(768 * 1024)>;
- cache-sets = <256>;
- cache-line-size = <128>;
- cache-level = <2>;
- };
+ i2c2: i2c@58782000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ i2c3: i2c@58783000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ /* i2c4 does not exist */
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ /* chip-internal connection for DMD */
+ i2c5: i2c@58785000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58785000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 25 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 29 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ /* chip-internal connection for HDMI */
+ i2c6: i2c@58786000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- i2c0: i2c@58780000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58780000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
+ usb2: usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ interrupts = <0 80 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ };
- i2c1: i2c@58781000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58781000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c2: i2c@58782000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58782000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c3: i2c@58783000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58783000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- /* i2c4 does not exist */
-
- /* chip-internal connection for DMD */
- i2c5: i2c@58785000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58785000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 25 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- /* chip-internal connection for HDMI */
- i2c6: i2c@58786000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58786000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 26 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- system-bus-controller@58c00000 {
- compatible = "socionext,uniphier-system-bus-controller";
- reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
- };
-
- usb2: usb@5a800100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a800100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb2>;
- interrupts = <0 80 4>;
- };
-
- usb3: usb@5a810100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a810100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb3>;
- interrupts = <0 81 4>;
- };
-
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-pro4-pinctrl",
- "syscon";
- reg = <0x5f801000 0xe00>;
- };
-
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0x304>;
- clocks = <&arm_timer_clk>;
- };
-
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0x304>;
- clocks = <&arm_timer_clk>;
- };
-
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
+ usb3: usb@5a810100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ interrupts = <0 81 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
};
};
-/include/ "uniphier-pinctrl.dtsi"
+&pinctrl {
+ compatible = "socionext,ph1-pro4-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
index 11eb762..2f389ea 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
@@ -42,7 +42,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,ph1-pro5";
@@ -86,193 +86,109 @@
clock-frequency = <50000000>;
};
};
+};
- soc {
- compatible = "simple-bus";
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>;
+ interrupts = <0 190 4>, <0 191 4>;
+ cache-unified;
+ cache-size = <(2 * 1024 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ next-level-cache = <&l3>;
+ };
+
+ l3: l3-cache@500c8000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(2 * 1024 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <256>;
+ cache-level = <3>;
+ };
+
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
#address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
+ #size-cells = <0>;
+ interrupts = <0 41 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
+ i2c1: i2c@58781000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- l2: l2-cache@500c0000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
- <0x506c0000 0x400>;
- interrupts = <0 190 4>, <0 191 4>;
- cache-unified;
- cache-size = <(2 * 1024 * 1024)>;
- cache-sets = <512>;
- cache-line-size = <128>;
- cache-level = <2>;
- next-level-cache = <&l3>;
- };
+ i2c2: i2c@58782000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- l3: l3-cache@500c8000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
- <0x506c8000 0x400>;
- interrupts = <0 174 4>, <0 175 4>;
- cache-unified;
- cache-size = <(2 * 1024 * 1024)>;
- cache-sets = <512>;
- cache-line-size = <256>;
- cache-level = <3>;
- };
+ i2c3: i2c@58783000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- };
+ /* i2c4 does not exist */
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- };
+ /* chip-internal connection for DMD */
+ i2c5: i2c@58785000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58785000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 25 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- };
-
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 177 4>;
- clocks = <&uart_clk>;
- };
-
- i2c0: i2c@58780000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58780000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c1: i2c@58781000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58781000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c2: i2c@58782000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58782000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c3: i2c@58783000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58783000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- /* i2c4 does not exist */
-
- /* chip-internal connection for DMD */
- i2c5: i2c@58785000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58785000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 25 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- /* chip-internal connection for HDMI */
- i2c6: i2c@58786000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58786000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 26 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- system-bus-controller@58c00000 {
- compatible = "socionext,uniphier-system-bus-controller";
- reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
- };
-
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-pro5-pinctrl", "syscon";
- reg = <0x5f801000 0xe00>;
- };
-
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0x304>;
- clocks = <&arm_timer_clk>;
- };
-
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0x304>;
- clocks = <&arm_timer_clk>;
- };
-
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
+ /* chip-internal connection for HDMI */
+ i2c6: i2c@58786000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
};
};
-/include/ "uniphier-pinctrl.dtsi"
+&pinctrl {
+ compatible = "socionext,ph1-pro5-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
index e88559b..7d06a1c 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -42,7 +42,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,ph1-sld8";
@@ -78,188 +78,104 @@
clock-frequency = <100000000>;
};
};
+};
- soc {
- compatible = "simple-bus";
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(256 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
+ i2c0: i2c@58400000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58400000 0x40>;
#address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
+ #size-cells = <0>;
+ interrupts = <0 41 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
+ i2c1: i2c@58480000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58480000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
- l2: l2-cache@500c0000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
- <0x506c0000 0x400>;
- interrupts = <0 174 4>, <0 175 4>;
- cache-unified;
- cache-size = <(256 * 1024)>;
- cache-sets = <256>;
- cache-line-size = <128>;
- cache-level = <2>;
- };
+ /* chip-internal connection for DMD */
+ i2c2: i2c@58500000 {
+ compatible = "socionext,uniphier-i2c";
+ reg = <0x58500000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <400000>;
+ };
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ i2c3: i2c@58580000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58580000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ usb0: usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ interrupts = <0 80 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ };
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ usb1: usb@5a810100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ interrupts = <0 81 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ };
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 29 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
-
- i2c0: i2c@58400000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58400000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- i2c1: i2c@58480000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58480000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- /* chip-internal connection for DMD */
- i2c2: i2c@58500000 {
- compatible = "socionext,uniphier-i2c";
- reg = <0x58500000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <400000>;
- };
-
- i2c3: i2c@58580000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58580000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- system-bus-controller@58c00000 {
- compatible = "socionext,uniphier-system-bus-controller";
- reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
- };
-
- usb0: usb@5a800100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a800100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0>;
- interrupts = <0 80 4>;
- };
-
- usb1: usb@5a810100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a810100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb1>;
- interrupts = <0 81 4>;
- };
-
- usb2: usb@5a820100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a820100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb2>;
- interrupts = <0 82 4>;
- };
-
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-sld8-pinctrl",
- "syscon";
- reg = <0x5f801000 0xe00>;
- };
-
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0x104>;
- clocks = <&arm_timer_clk>;
- };
-
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0x104>;
- clocks = <&arm_timer_clk>;
- };
-
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
+ usb2: usb@5a820100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a820100 0x100>;
+ interrupts = <0 82 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
};
};
-/include/ "uniphier-pinctrl.dtsi"
+&serial3 {
+ interrupts = <0 29 4>;
+};
+
+&pinctrl {
+ compatible = "socionext,ph1-sld8-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
index 259f1a9..6bd353f 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi
+++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
@@ -42,7 +42,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,proxstream2";
@@ -100,189 +100,106 @@
clock-frequency = <50000000>;
};
};
+};
- soc {
- compatible = "simple-bus";
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+ cache-unified;
+ cache-size = <(1280 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
#address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
+ #size-cells = <0>;
+ interrupts = <0 41 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
+ i2c1: i2c@58781000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- l2: l2-cache@500c0000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
- <0x506c0000 0x400>;
- interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
- cache-unified;
- cache-size = <(1280 * 1024)>;
- cache-sets = <512>;
- cache-line-size = <128>;
- cache-level = <2>;
- };
+ i2c2: i2c@58782000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ interrupts = <0 43 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- };
+ i2c3: i2c@58783000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- };
+ /* chip-internal connection for DMD */
+ i2c4: i2c@58784000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58784000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 45 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- };
+ /* chip-internal connection for STM */
+ i2c5: i2c@58785000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58785000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 25 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 177 4>;
- clocks = <&uart_clk>;
- };
-
- i2c0: i2c@58780000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58780000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c1: i2c@58781000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58781000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c2: i2c@58782000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58782000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c3: i2c@58783000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58783000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- /* chip-internal connection for DMD */
- i2c4: i2c@58784000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58784000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 45 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- /* chip-internal connection for STM */
- i2c5: i2c@58785000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58785000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 25 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- /* chip-internal connection for HDMI */
- i2c6: i2c@58786000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58786000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 26 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- system-bus-controller@58c00000 {
- compatible = "socionext,uniphier-system-bus-controller";
- reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
- };
-
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,proxstream2-pinctrl", "syscon";
- reg = <0x5f801000 0xe00>;
- };
-
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0xf04>;
- clocks = <&arm_timer_clk>;
- };
-
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0xf04>;
- clocks = <&arm_timer_clk>;
- };
-
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
+ /* chip-internal connection for HDMI */
+ i2c6: i2c@58786000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
};
};
-/include/ "uniphier-pinctrl.dtsi"
+&pinctrl {
+ compatible = "socionext,proxstream2-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index e5949b9..6e556be 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -23,6 +23,18 @@
status = "okay";
};
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan0>;
+ status = "disabled";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "disabled";
+};
+
&dspi1 {
bus-num = <1>;
pinctrl-names = "default";
@@ -125,6 +137,20 @@
&iomuxc {
vf610-colibri {
+ pinctrl_flexcan0: can0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__CAN0_RX 0x31F1
+ VF610_PAD_PTB15__CAN0_TX 0x31F2
+ >;
+ };
+
+ pinctrl_flexcan1: can1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__CAN1_RX 0x31F1
+ VF610_PAD_PTB17__CAN1_TX 0x31F2
+ >;
+ };
+
pinctrl_gpio_ext: gpio_ext {
fsl,pins = <
VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
index 19fe045..2d7eab7 100644
--- a/arch/arm/boot/dts/vf610-colibri.dtsi
+++ b/arch/arm/boot/dts/vf610-colibri.dtsi
@@ -18,8 +18,3 @@
reg = <0x80000000 0x10000000>;
};
};
-
-&L2 {
- arm,data-latency = <2 1 2>;
- arm,tag-latency = <3 2 3>;
-};
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 5f8eb1b..58bc6e4 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -19,7 +19,7 @@
reg = <0x40006000 0x1000>;
cache-unified;
cache-level = <2>;
- arm,data-latency = <1 1 1>;
+ arm,data-latency = <3 3 3>;
arm,tag-latency = <2 2 2>;
};
};
diff --git a/arch/arm/boot/dts/vf610m4-cosmic.dts b/arch/arm/boot/dts/vf610m4-cosmic.dts
new file mode 100644
index 0000000..8944a2d
--- /dev/null
+++ b/arch/arm/boot/dts/vf610m4-cosmic.dts
@@ -0,0 +1,90 @@
+/*
+ * Device tree for Cosmic+ VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015
+ *
+ * Based on vf610m4 Colibri
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+ model = "VF610 Cortex-M4";
+ compatible = "fsl,vf610m4";
+};
+
+&gpio0 {
+ status = "disabled";
+};
+
+&gpio1 {
+ status = "disabled";
+};
+
+&gpio2 {
+ status = "disabled";
+};
+
+&gpio3 {
+ status = "disabled";
+};
+
+&gpio4 {
+ status = "disabled";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&iomuxc {
+ vf610-cosmic {
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ VF610_PAD_PTA20__UART3_TX 0x21a2
+ VF610_PAD_PTA21__UART3_RX 0x21a1
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 0d5acc2..a9ceb5b 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -178,8 +178,10 @@
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_SAI2>;
- clock-names = "sai";
+ clocks = <&clks VF610_CLK_SAI2>,
+ <&clks VF610_CLK_SAI2_DIV>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 0 21>,
<&edma0 0 20>;
@@ -453,6 +455,30 @@
status = "disabled";
};
+ dspi2: dspi2@400ac000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x400ac000 0x1000>;
+ interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DSPI2>;
+ clock-names = "dspi";
+ spi-num-chipselects = <2>;
+ status = "disabled";
+ };
+
+ dspi3: dspi3@400ad000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x400ad000 0x1000>;
+ interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DSPI3>;
+ clock-names = "dspi";
+ spi-num-chipselects = <2>;
+ status = "disabled";
+ };
+
adc1: adc@400bb000 {
compatible = "fsl,vf610-adc";
reg = <0x400bb000 0x1000>;
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 1a5220e..f283ff0 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -19,7 +19,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
@@ -33,7 +33,7 @@
>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <1>;
@@ -101,6 +101,8 @@
#gpio-cells = <2>;
clocks = <&clkc 42>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <0 20 4>;
reg = <0xe000a000 0x1000>;
@@ -238,7 +240,7 @@
slcr: slcr@f8000000 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
+ compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
reg = <0xF8000000 0x1000>;
ranges;
clkc: clkc@100 {
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 5df8f81..cb64209 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -43,14 +43,14 @@
label = "sw14";
gpios = <&gpio0 12 0>;
linux,code = <108>; /* down */
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
sw13 {
label = "sw13";
gpios = <&gpio0 14 0>;
linux,code = <103>; /* up */
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
};
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
index d019a08..2f9f09a 100644
--- a/arch/arm/mach-mediatek/mediatek.c
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -44,6 +44,7 @@
};
static const char * const mediatek_board_dt_compat[] = {
+ "mediatek,mt2701",
"mediatek,mt6589",
"mediatek,mt6592",
"mediatek,mt8127",
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 5814477..62269a3 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -150,6 +150,21 @@
}
};
+static struct ti_st_plat_data wilink7_pdata = {
+ .nshutdown_gpio = 162,
+ .dev_name = "/dev/ttyO1",
+ .flow_cntrl = 1,
+ .baud_rate = 300000,
+};
+
+static struct platform_device wl128x_device = {
+ .name = "kim",
+ .id = -1,
+ .dev = {
+ .platform_data = &wilink7_pdata,
+ }
+};
+
static struct platform_device btwilink_device = {
.name = "btwilink",
.id = -1,
@@ -276,6 +291,13 @@
hsmmc2_internal_input_clk();
}
+static void __init omap3_logicpd_torpedo_init(void)
+{
+ omap3_gpio126_127_129();
+ platform_device_register(&wl128x_device);
+ platform_device_register(&btwilink_device);
+}
+
/* omap3pandora legacy devices */
#define PANDORA_WIFI_IRQ_GPIO 21
#define PANDORA_WIFI_NRESET_GPIO 23
@@ -503,7 +525,7 @@
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
- { "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, },
+ { "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, },
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
{ "ti,am3517-evm", am3517_evm_legacy_init, },
{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 4dd5f93..fd71a87 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -15,7 +15,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/mt8173-power.h>
-#include <dt-bindings/reset-controller/mt8173-resets.h>
+#include <dt-bindings/reset/mt8173-resets.h>
#include "mt8173-pinfunc.h"
/ {
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index 85260fb..f287845 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -1,3 +1,13 @@
+config CLK_BCM_63XX
+ bool "Broadcom BCM63xx clock support"
+ depends on ARCH_BCM_63XX || COMPILE_TEST
+ depends on COMMON_CLK
+ select COMMON_CLK_IPROC
+ default ARCH_BCM_63XX
+ help
+ Enable common clock framework support for Broadcom BCM63xx DSL SoCs
+ based on the ARM architecture
+
config CLK_BCM_KONA
bool "Broadcom Kona CCU clock support"
depends on ARCH_BCM_MOBILE || COMPILE_TEST
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 3fc9506..247c267 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_CLK_BCM_63XX) += clk-bcm63xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-kona.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
diff --git a/drivers/clk/bcm/clk-bcm63xx.c b/drivers/clk/bcm/clk-bcm63xx.c
new file mode 100644
index 0000000..fbc17ae
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm63xx.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include "clk-iproc.h"
+
+static void __init bcm63138_armpll_init(struct device_node *node)
+{
+ iproc_armpll_setup(node);
+}
+CLK_OF_DECLARE(bcm63138_armpll, "brcm,bcm63138-armpll", bcm63138_armpll_init);
diff --git a/drivers/clk/imx/clk-imx25.c b/drivers/clk/imx/clk-imx25.c
index c4c141c..23686f7 100644
--- a/drivers/clk/imx/clk-imx25.c
+++ b/drivers/clk/imx/clk-imx25.c
@@ -96,13 +96,11 @@
NULL
};
-static int __init __mx25_clocks_init(unsigned long osc_rate,
- void __iomem *ccm_base)
+static int __init __mx25_clocks_init(void __iomem *ccm_base)
{
BUG_ON(!ccm_base);
clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[osc] = imx_clk_fixed("osc", osc_rate);
clk[mpll] = imx_clk_pllv1(IMX_PLLV1_IMX25, "mpll", "osc", ccm(CCM_MPCTL));
clk[upll] = imx_clk_pllv1(IMX_PLLV1_IMX25, "upll", "osc", ccm(CCM_UPCTL));
clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4);
@@ -250,22 +248,10 @@
static void __init mx25_clocks_init_dt(struct device_node *np)
{
- struct device_node *refnp;
- unsigned long osc_rate = 24000000;
void __iomem *ccm;
- /* retrieve the freqency of fixed clocks from device tree */
- for_each_compatible_node(refnp, NULL, "fixed-clock") {
- u32 rate;
- if (of_property_read_u32(refnp, "clock-frequency", &rate))
- continue;
-
- if (of_device_is_compatible(refnp, "fsl,imx-osc"))
- osc_rate = rate;
- }
-
ccm = of_iomap(np, 0);
- __mx25_clocks_init(osc_rate, ccm);
+ __mx25_clocks_init(ccm);
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
diff --git a/drivers/clk/imx/clk-imx51-imx53.c b/drivers/clk/imx/clk-imx51-imx53.c
index c677034..29d4c44 100644
--- a/drivers/clk/imx/clk-imx51-imx53.c
+++ b/drivers/clk/imx/clk-imx51-imx53.c
@@ -519,10 +519,10 @@
mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT);
clk[IMX5_CLK_LDB_DI0_GATE] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
clk[IMX5_CLK_LDB_DI1_GATE] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
- clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
- mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
- clk[IMX5_CLK_IPU_DI1_SEL] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
- mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
+ clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux_flags("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+ mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel), CLK_SET_RATE_PARENT);
+ clk[IMX5_CLK_IPU_DI1_SEL] = imx_clk_mux_flags("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+ mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel), CLK_SET_RATE_PARENT);
clk[IMX5_CLK_TVE_EXT_SEL] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT);
clk[IMX5_CLK_TVE_GATE] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index c193508..f0efc6f 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -70,7 +70,8 @@
static const char *lvds_sels[] = {
"dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
- "pcie_ref_125m", "sata_ref_100m",
+ "pcie_ref_125m", "sata_ref_100m", "usbphy1", "usbphy2",
+ "dummy", "dummy", "dummy", "dummy", "osc",
};
static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", };
static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 01718d0..08692d7 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -399,9 +399,7 @@
/* mask handshake of mmdc */
writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- if (IS_ERR(clks[i]))
- pr_err("i.MX6UL clk %d: register failed with %ld\n", i, PTR_ERR(clks[i]));
+ imx_check_clocks(clks, ARRAY_SIZE(clks));
clk_data.clks = clks;
clk_data.clk_num = ARRAY_SIZE(clks);
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index 448ef32..fbb6a8c 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -833,10 +833,13 @@
clks[IMX7D_GPT_3M_CLK] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- if (IS_ERR(clks[i]))
- pr_err("i.MX7D clk %d: register failed with %ld\n",
- i, PTR_ERR(clks[i]));
+ clks[IMX7D_CLK_ARM] = imx_clk_cpu("arm", "arm_a7_root_clk",
+ clks[IMX7D_ARM_A7_ROOT_CLK],
+ clks[IMX7D_ARM_A7_ROOT_SRC],
+ clks[IMX7D_PLL_ARM_MAIN_CLK],
+ clks[IMX7D_PLL_SYS_MAIN_CLK]);
+
+ imx_check_clocks(clks, ARRAY_SIZE(clks));
clk_data.clks = clks;
clk_data.clk_num = ARRAY_SIZE(clks);
diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
index 6addf8f..c05c43d 100644
--- a/drivers/clk/imx/clk-pllv3.c
+++ b/drivers/clk/imx/clk-pllv3.c
@@ -97,6 +97,16 @@
writel_relaxed(val, pll->base);
}
+static int clk_pllv3_is_prepared(struct clk_hw *hw)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+
+ if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+ return 1;
+
+ return 0;
+}
+
static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
@@ -139,6 +149,7 @@
static const struct clk_ops clk_pllv3_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
+ .is_prepared = clk_pllv3_is_prepared,
.recalc_rate = clk_pllv3_recalc_rate,
.round_rate = clk_pllv3_round_rate,
.set_rate = clk_pllv3_set_rate,
@@ -193,6 +204,7 @@
static const struct clk_ops clk_pllv3_sys_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
+ .is_prepared = clk_pllv3_is_prepared,
.recalc_rate = clk_pllv3_sys_recalc_rate,
.round_rate = clk_pllv3_sys_round_rate,
.set_rate = clk_pllv3_sys_set_rate,
@@ -265,6 +277,7 @@
static const struct clk_ops clk_pllv3_av_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
+ .is_prepared = clk_pllv3_is_prepared,
.recalc_rate = clk_pllv3_av_recalc_rate,
.round_rate = clk_pllv3_av_round_rate,
.set_rate = clk_pllv3_av_set_rate,
@@ -279,6 +292,7 @@
static const struct clk_ops clk_pllv3_enet_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
+ .is_prepared = clk_pllv3_is_prepared,
.recalc_rate = clk_pllv3_enet_recalc_rate,
};
diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c
index d1b1c95..0a94d96 100644
--- a/drivers/clk/imx/clk-vf610.c
+++ b/drivers/clk/imx/clk-vf610.c
@@ -335,22 +335,22 @@
clk[VF610_CLK_SAI0_SEL] = imx_clk_mux("sai0_sel", CCM_CSCMR1, 0, 2, sai_sels, 4);
clk[VF610_CLK_SAI0_EN] = imx_clk_gate("sai0_en", "sai0_sel", CCM_CSCDR1, 16);
clk[VF610_CLK_SAI0_DIV] = imx_clk_divider("sai0_div", "sai0_en", CCM_CSCDR1, 0, 4);
- clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "sai0_div", CCM_CCGR0, CCM_CCGRx_CGn(15));
+ clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(15));
clk[VF610_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", CCM_CSCMR1, 2, 2, sai_sels, 4);
clk[VF610_CLK_SAI1_EN] = imx_clk_gate("sai1_en", "sai1_sel", CCM_CSCDR1, 17);
clk[VF610_CLK_SAI1_DIV] = imx_clk_divider("sai1_div", "sai1_en", CCM_CSCDR1, 4, 4);
- clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "sai1_div", CCM_CCGR1, CCM_CCGRx_CGn(0));
+ clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(0));
clk[VF610_CLK_SAI2_SEL] = imx_clk_mux("sai2_sel", CCM_CSCMR1, 4, 2, sai_sels, 4);
clk[VF610_CLK_SAI2_EN] = imx_clk_gate("sai2_en", "sai2_sel", CCM_CSCDR1, 18);
clk[VF610_CLK_SAI2_DIV] = imx_clk_divider("sai2_div", "sai2_en", CCM_CSCDR1, 8, 4);
- clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "sai2_div", CCM_CCGR1, CCM_CCGRx_CGn(1));
+ clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(1));
clk[VF610_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", CCM_CSCMR1, 6, 2, sai_sels, 4);
clk[VF610_CLK_SAI3_EN] = imx_clk_gate("sai3_en", "sai3_sel", CCM_CSCDR1, 19);
clk[VF610_CLK_SAI3_DIV] = imx_clk_divider("sai3_div", "sai3_en", CCM_CSCDR1, 12, 4);
- clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "sai3_div", CCM_CCGR1, CCM_CCGRx_CGn(2));
+ clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(2));
clk[VF610_CLK_NFC_SEL] = imx_clk_mux("nfc_sel", CCM_CSCMR1, 12, 2, nfc_sels, 4);
clk[VF610_CLK_NFC_EN] = imx_clk_gate("nfc_en", "nfc_sel", CCM_CSCDR2, 9);
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 0675e26..16fe773 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -1752,16 +1752,14 @@
return ret;
}
-static bool edma_is_memcpy_channel(int ch_num, u16 *memcpy_channels)
+static bool edma_is_memcpy_channel(int ch_num, s32 *memcpy_channels)
{
- s16 *memcpy_ch = memcpy_channels;
-
if (!memcpy_channels)
return false;
- while (*memcpy_ch != -1) {
- if (*memcpy_ch == ch_num)
+ while (*memcpy_channels != -1) {
+ if (*memcpy_channels == ch_num)
return true;
- memcpy_ch++;
+ memcpy_channels++;
}
return false;
}
@@ -1775,7 +1773,7 @@
{
struct dma_device *s_ddev = &ecc->dma_slave;
struct dma_device *m_ddev = NULL;
- s16 *memcpy_channels = ecc->info->memcpy_channels;
+ s32 *memcpy_channels = ecc->info->memcpy_channels;
int i, j;
dma_cap_zero(s_ddev->cap_mask);
@@ -1996,16 +1994,16 @@
prop = of_find_property(dev->of_node, "ti,edma-memcpy-channels", &sz);
if (prop) {
const char pname[] = "ti,edma-memcpy-channels";
- size_t nelm = sz / sizeof(s16);
- s16 *memcpy_ch;
+ size_t nelm = sz / sizeof(s32);
+ s32 *memcpy_ch;
- memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s16),
+ memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s32),
GFP_KERNEL);
if (!memcpy_ch)
return ERR_PTR(-ENOMEM);
- ret = of_property_read_u16_array(dev->of_node, pname,
- (u16 *)memcpy_ch, nelm);
+ ret = of_property_read_u32_array(dev->of_node, pname,
+ (u32 *)memcpy_ch, nelm);
if (ret)
return ERR_PTR(ret);
@@ -2017,31 +2015,50 @@
&sz);
if (prop) {
const char pname[] = "ti,edma-reserved-slot-ranges";
+ u32 (*tmp)[2];
s16 (*rsv_slots)[2];
- size_t nelm = sz / sizeof(*rsv_slots);
+ size_t nelm = sz / sizeof(*tmp);
struct edma_rsv_info *rsv_info;
+ int i;
if (!nelm)
return info;
- rsv_info = devm_kzalloc(dev, sizeof(*rsv_info), GFP_KERNEL);
- if (!rsv_info)
+ tmp = kcalloc(nelm, sizeof(*tmp), GFP_KERNEL);
+ if (!tmp)
return ERR_PTR(-ENOMEM);
+ rsv_info = devm_kzalloc(dev, sizeof(*rsv_info), GFP_KERNEL);
+ if (!rsv_info) {
+ kfree(tmp);
+ return ERR_PTR(-ENOMEM);
+ }
+
rsv_slots = devm_kcalloc(dev, nelm + 1, sizeof(*rsv_slots),
GFP_KERNEL);
- if (!rsv_slots)
+ if (!rsv_slots) {
+ kfree(tmp);
return ERR_PTR(-ENOMEM);
+ }
- ret = of_property_read_u16_array(dev->of_node, pname,
- (u16 *)rsv_slots, nelm * 2);
- if (ret)
+ ret = of_property_read_u32_array(dev->of_node, pname,
+ (u32 *)tmp, nelm * 2);
+ if (ret) {
+ kfree(tmp);
return ERR_PTR(ret);
+ }
+ for (i = 0; i < nelm; i++) {
+ rsv_slots[i][0] = tmp[i][0];
+ rsv_slots[i][1] = tmp[i][1];
+ }
rsv_slots[nelm][0] = -1;
rsv_slots[nelm][1] = -1;
+
info->rsv = rsv_info;
info->rsv->rsv_slots = (const s16 (*)[2])rsv_slots;
+
+ kfree(tmp);
}
return info;
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index a4a7a9c..edca8985c 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -447,5 +447,6 @@
#define IMX7D_SEMA4_HS_ROOT_CLK 434
#define IMX7D_PLL_DRAM_TEST_DIV 435
#define IMX7D_ADC_ROOT_CLK 436
-#define IMX7D_CLK_END 437
+#define IMX7D_CLK_ARM 437
+#define IMX7D_CLK_END 438
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index dd09b73..ffa1137 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -102,6 +102,7 @@
#define R8A7791_CLK_VIN2 9
#define R8A7791_CLK_VIN1 10
#define R8A7791_CLK_VIN0 11
+#define R8A7791_CLK_ETHERAVB 12
#define R8A7791_CLK_ETHER 13
#define R8A7791_CLK_SATA1 14
#define R8A7791_CLK_SATA0 15
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index 09da38a..a7a7e03 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -79,6 +79,7 @@
#define R8A7794_CLK_SCIF2 19
#define R8A7794_CLK_SCIF1 20
#define R8A7794_CLK_SCIF0 21
+#define R8A7794_CLK_DU0 24
/* MSTP8 */
#define R8A7794_CLK_VIN1 10
diff --git a/include/dt-bindings/clock/rk3036-cru.h b/include/dt-bindings/clock/rk3036-cru.h
new file mode 100644
index 0000000..ebc7a7b
--- /dev/null
+++ b/include/dt-bindings/clock/rk3036-cru.h
@@ -0,0 +1,193 @@
+/*
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Xing Zheng <zhengxing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
+
+/* core clocks */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_GPLL 3
+#define ARMCLK 4
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU 64
+#define SCLK_SPI 65
+#define SCLK_SDMMC 68
+#define SCLK_SDIO 69
+#define SCLK_EMMC 71
+#define SCLK_NANDC 76
+#define SCLK_UART0 77
+#define SCLK_UART1 78
+#define SCLK_UART2 79
+#define SCLK_I2S 82
+#define SCLK_SPDIF 83
+#define SCLK_TIMER0 85
+#define SCLK_TIMER1 86
+#define SCLK_TIMER2 87
+#define SCLK_TIMER3 88
+#define SCLK_OTGPHY0 93
+#define SCLK_LCDC 100
+#define SCLK_HDMI 109
+#define SCLK_HEVC 111
+#define SCLK_I2S_OUT 113
+#define SCLK_SDMMC_DRV 114
+#define SCLK_SDIO_DRV 115
+#define SCLK_EMMC_DRV 117
+#define SCLK_SDMMC_SAMPLE 118
+#define SCLK_SDIO_SAMPLE 119
+#define SCLK_EMMC_SAMPLE 121
+#define SCLK_PVTM_CORE 123
+#define SCLK_PVTM_GPU 124
+#define SCLK_PVTM_VIDEO 125
+#define SCLK_MAC 151
+#define SCLK_MACREF 152
+#define SCLK_SFC 160
+
+/* aclk gates */
+#define ACLK_DMAC2 194
+#define ACLK_LCDC 197
+#define ACLK_VIO 203
+#define ACLK_VCODEC 208
+#define ACLK_CPU 209
+#define ACLK_PERI 210
+
+/* pclk gates */
+#define PCLK_GPIO0 320
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GRF 329
+#define PCLK_I2C0 332
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_SPI 338
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_PWM 350
+#define PCLK_TIMER 353
+#define PCLK_HDMI 360
+#define PCLK_CPU 362
+#define PCLK_PERI 363
+#define PCLK_DDRUPCTL 364
+#define PCLK_WDT 368
+#define PCLK_ACODEC 369
+
+/* hclk gates */
+#define HCLK_OTG0 449
+#define HCLK_OTG1 450
+#define HCLK_NANDC 453
+#define HCLK_SDMMC 456
+#define HCLK_SDIO 457
+#define HCLK_EMMC 459
+#define HCLK_I2S 462
+#define HCLK_LCDC 465
+#define HCLK_ROM 467
+#define HCLK_VIO_BUS 472
+#define HCLK_VCODEC 476
+#define HCLK_CPU 477
+#define HCLK_PERI 478
+
+#define CLK_NR_CLKS (HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0 0
+#define SRST_CORE1 1
+#define SRST_CORE0_DBG 4
+#define SRST_CORE1_DBG 5
+#define SRST_CORE0_POR 8
+#define SRST_CORE1_POR 9
+#define SRST_L2C 12
+#define SRST_TOPDBG 13
+#define SRST_STRC_SYS_A 14
+#define SRST_PD_CORE_NIU 15
+
+#define SRST_TIMER2 16
+#define SRST_CPUSYS_H 17
+#define SRST_AHB2APB_H 19
+#define SRST_TIMER3 20
+#define SRST_INTMEM 21
+#define SRST_ROM 22
+#define SRST_PERI_NIU 23
+#define SRST_I2S 24
+#define SRST_DDR_PLL 25
+#define SRST_GPU_DLL 26
+#define SRST_TIMER0 27
+#define SRST_TIMER1 28
+#define SRST_CORE_DLL 29
+#define SRST_EFUSE_P 30
+#define SRST_ACODEC_P 31
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_UART0 39
+#define SRST_UART1 40
+#define SRST_UART2 41
+#define SRST_I2C0 43
+#define SRST_I2C1 44
+#define SRST_I2C2 45
+#define SRST_SFC 47
+
+#define SRST_PWM0 48
+#define SRST_DAP 51
+#define SRST_DAP_SYS 52
+#define SRST_GRF 55
+#define SRST_PERIPHSYS_A 57
+#define SRST_PERIPHSYS_H 58
+#define SRST_PERIPHSYS_P 59
+#define SRST_CPU_PERI 61
+#define SRST_EMEM_PERI 62
+#define SRST_USB_PERI 63
+
+#define SRST_DMA2 64
+#define SRST_MAC 66
+#define SRST_NANDC 68
+#define SRST_USBOTG0 69
+#define SRST_OTGC0 71
+#define SRST_USBOTG1 72
+#define SRST_OTGC1 74
+#define SRST_DDRMSCH 79
+
+#define SRST_MMC0 81
+#define SRST_SDIO 82
+#define SRST_EMMC 83
+#define SRST_SPI0 84
+#define SRST_WDT 86
+#define SRST_DDRPHY 88
+#define SRST_DDRPHY_P 89
+#define SRST_DDRCTRL 90
+#define SRST_DDRCTRL_P 91
+
+#define SRST_HDMI_P 96
+#define SRST_VIO_BUS_H 99
+#define SRST_UTMI0 103
+#define SRST_UTMI1 104
+#define SRST_USBPOR 105
+
+#define SRST_VCODEC_A 112
+#define SRST_VCODEC_H 113
+#define SRST_VIO1_A 114
+#define SRST_HEVC 115
+#define SRST_VCODEC_NIU_A 116
+#define SRST_LCDC1_A 117
+#define SRST_LCDC1_H 118
+#define SRST_LCDC1_D 119
+#define SRST_GPU 120
+#define SRST_GPU_NIU_A 122
+
+#define SRST_DBG_P 131
+
+#endif
diff --git a/include/dt-bindings/clock/rk3228-cru.h b/include/dt-bindings/clock/rk3228-cru.h
new file mode 100644
index 0000000..a78dd89
--- /dev/null
+++ b/include/dt-bindings/clock/rk3228-cru.h
@@ -0,0 +1,220 @@
+/*
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Jeffy Chen <jeffy.chen@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3228_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3228_H
+
+/* core clocks */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_CPLL 3
+#define PLL_GPLL 4
+#define ARMCLK 5
+
+/* sclk gates (special clocks) */
+#define SCLK_SPI0 65
+#define SCLK_NANDC 67
+#define SCLK_SDMMC 68
+#define SCLK_SDIO 69
+#define SCLK_EMMC 71
+#define SCLK_UART0 77
+#define SCLK_UART1 78
+#define SCLK_UART2 79
+#define SCLK_I2S0 80
+#define SCLK_I2S1 81
+#define SCLK_I2S2 82
+#define SCLK_SPDIF 83
+#define SCLK_TIMER0 85
+#define SCLK_TIMER1 86
+#define SCLK_TIMER2 87
+#define SCLK_TIMER3 88
+#define SCLK_TIMER4 89
+#define SCLK_TIMER5 90
+#define SCLK_I2S_OUT 113
+#define SCLK_SDMMC_DRV 114
+#define SCLK_SDIO_DRV 115
+#define SCLK_EMMC_DRV 117
+#define SCLK_SDMMC_SAMPLE 118
+#define SCLK_SDIO_SAMPLE 119
+#define SCLK_EMMC_SAMPLE 121
+
+/* aclk gates */
+#define ACLK_DMAC 194
+#define ACLK_PERI 210
+
+/* pclk gates */
+#define PCLK_GPIO0 320
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GPIO3 323
+#define PCLK_GRF 329
+#define PCLK_I2C0 332
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_I2C3 335
+#define PCLK_SPI0 338
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_PWM 350
+#define PCLK_TIMER 353
+#define PCLK_PERI 363
+
+/* hclk gates */
+#define HCLK_NANDC 453
+#define HCLK_SDMMC 456
+#define HCLK_SDIO 457
+#define HCLK_EMMC 459
+#define HCLK_PERI 478
+
+#define CLK_NR_CLKS (HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0_PO 0
+#define SRST_CORE1_PO 1
+#define SRST_CORE2_PO 2
+#define SRST_CORE3_PO 3
+#define SRST_CORE0 4
+#define SRST_CORE1 5
+#define SRST_CORE2 6
+#define SRST_CORE3 7
+#define SRST_CORE0_DBG 8
+#define SRST_CORE1_DBG 9
+#define SRST_CORE2_DBG 10
+#define SRST_CORE3_DBG 11
+#define SRST_TOPDBG 12
+#define SRST_ACLK_CORE 13
+#define SRST_NOC 14
+#define SRST_L2C 15
+
+#define SRST_CPUSYS_H 18
+#define SRST_BUSSYS_H 19
+#define SRST_SPDIF 20
+#define SRST_INTMEM 21
+#define SRST_ROM 22
+#define SRST_OTG_ADP 23
+#define SRST_I2S0 24
+#define SRST_I2S1 25
+#define SRST_I2S2 26
+#define SRST_ACODEC_P 27
+#define SRST_DFIMON 28
+#define SRST_MSCH 29
+#define SRST_EFUSE1024 30
+#define SRST_EFUSE256 31
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_GPIO3 35
+#define SRST_PERIPH_NOC_A 36
+#define SRST_PERIPH_NOC_BUS_H 37
+#define SRST_PERIPH_NOC_P 38
+#define SRST_UART0 39
+#define SRST_UART1 40
+#define SRST_UART2 41
+#define SRST_PHYNOC 42
+#define SRST_I2C0 43
+#define SRST_I2C1 44
+#define SRST_I2C2 45
+#define SRST_I2C3 46
+
+#define SRST_PWM 48
+#define SRST_A53_GIC 49
+#define SRST_DAP 51
+#define SRST_DAP_NOC 52
+#define SRST_CRYPTO 53
+#define SRST_SGRF 54
+#define SRST_GRF 55
+#define SRST_GMAC 56
+#define SRST_PERIPH_NOC_H 58
+#define SRST_MACPHY 63
+
+#define SRST_DMA 64
+#define SRST_NANDC 68
+#define SRST_USBOTG 69
+#define SRST_OTGC 70
+#define SRST_USBHOST0 71
+#define SRST_HOST_CTRL0 72
+#define SRST_USBHOST1 73
+#define SRST_HOST_CTRL1 74
+#define SRST_USBHOST2 75
+#define SRST_HOST_CTRL2 76
+#define SRST_USBPOR0 77
+#define SRST_USBPOR1 78
+#define SRST_DDRMSCH 79
+
+#define SRST_SMART_CARD 80
+#define SRST_SDMMC 81
+#define SRST_SDIO 82
+#define SRST_EMMC 83
+#define SRST_SPI 84
+#define SRST_TSP_H 85
+#define SRST_TSP 86
+#define SRST_TSADC 87
+#define SRST_DDRPHY 88
+#define SRST_DDRPHY_P 89
+#define SRST_DDRCTRL 90
+#define SRST_DDRCTRL_P 91
+#define SRST_HOST0_ECHI 92
+#define SRST_HOST1_ECHI 93
+#define SRST_HOST2_ECHI 94
+#define SRST_VOP_NOC_A 95
+
+#define SRST_HDMI_P 96
+#define SRST_VIO_ARBI_H 97
+#define SRST_IEP_NOC_A 98
+#define SRST_VIO_NOC_H 99
+#define SRST_VOP_A 100
+#define SRST_VOP_H 101
+#define SRST_VOP_D 102
+#define SRST_UTMI0 103
+#define SRST_UTMI1 104
+#define SRST_UTMI2 105
+#define SRST_UTMI3 106
+#define SRST_RGA 107
+#define SRST_RGA_NOC_A 108
+#define SRST_RGA_A 109
+#define SRST_RGA_H 110
+#define SRST_HDCP_A 111
+
+#define SRST_VPU_A 112
+#define SRST_VPU_H 113
+#define SRST_VPU_NOC_A 116
+#define SRST_VPU_NOC_H 117
+#define SRST_RKVDEC_A 118
+#define SRST_RKVDEC_NOC_A 119
+#define SRST_RKVDEC_H 120
+#define SRST_RKVDEC_NOC_H 121
+#define SRST_RKVDEC_CORE 122
+#define SRST_RKVDEC_CABAC 123
+#define SRST_IEP_A 124
+#define SRST_IEP_H 125
+#define SRST_GPU_A 126
+#define SRST_GPU_NOC_A 127
+
+#define SRST_CORE_DBG 128
+#define SRST_DBG_P 129
+#define SRST_TIMER0 130
+#define SRST_TIMER1 131
+#define SRST_TIMER2 132
+#define SRST_TIMER3 133
+#define SRST_TIMER4 134
+#define SRST_TIMER5 135
+#define SRST_VIO_H2P 136
+#define SRST_HDMIPHY 139
+#define SRST_VDAC 140
+#define SRST_TIMER_6CH_P 141
+
+#endif
diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h
index c719aac..9a586e2 100644
--- a/include/dt-bindings/clock/rk3288-cru.h
+++ b/include/dt-bindings/clock/rk3288-cru.h
@@ -86,6 +86,8 @@
#define SCLK_USBPHY480M_SRC 122
#define SCLK_PVTM_CORE 123
#define SCLK_PVTM_GPU 124
+#define SCLK_CRYPTO 125
+#define SCLK_MIPIDSI_24M 126
#define SCLK_MAC 151
#define SCLK_MACREF_OUT 152
@@ -164,6 +166,8 @@
#define PCLK_DDRUPCTL1 366
#define PCLK_PUBL1 367
#define PCLK_WDT 368
+#define PCLK_EFUSE256 369
+#define PCLK_EFUSE1024 370
/* hclk gates */
#define HCLK_GPS 448
diff --git a/include/dt-bindings/clock/sh73a0-clock.h b/include/dt-bindings/clock/sh73a0-clock.h
index 5336956..2eca353a 100644
--- a/include/dt-bindings/clock/sh73a0-clock.h
+++ b/include/dt-bindings/clock/sh73a0-clock.h
@@ -28,7 +28,8 @@
#define SH73A0_CLK_HP 14
/* MSTP0 */
-#define SH73A0_CLK_IIC2 1
+#define SH73A0_CLK_IIC2 1
+#define SH73A0_CLK_MSIOF0 0
/* MSTP1 */
#define SH73A0_CLK_CEU1 29
@@ -45,8 +46,11 @@
#define SH73A0_CLK_SCIFA7 19
#define SH73A0_CLK_SY_DMAC 18
#define SH73A0_CLK_MP_DMAC 17
+#define SH73A0_CLK_MSIOF3 15
+#define SH73A0_CLK_MSIOF1 8
#define SH73A0_CLK_SCIFA5 7
#define SH73A0_CLK_SCIFB 6
+#define SH73A0_CLK_MSIOF2 5
#define SH73A0_CLK_SCIFA0 4
#define SH73A0_CLK_SCIFA1 3
#define SH73A0_CLK_SCIFA2 2
diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
index 774dc1e..344bd1e 100644
--- a/include/dt-bindings/pinctrl/am43xx.h
+++ b/include/dt-bindings/pinctrl/am43xx.h
@@ -31,5 +31,11 @@
#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (INPUT_EN)
+/*
+ * Macro to allow using the absolute physical address instead of the
+ * padconf registers instead of the offset from padconf base.
+ */
+#define AM4372_IOPAD(pa, val) (((pa) & 0xffff) - 0x0800) (val)
+
#endif
diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
index 4379e29..5c75e80 100644
--- a/include/dt-bindings/pinctrl/dra.h
+++ b/include/dt-bindings/pinctrl/dra.h
@@ -67,5 +67,11 @@
#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN)
+/*
+ * Macro to allow using the absolute physical address instead of the
+ * padconf registers instead of the offset from padconf base.
+ */
+#define DRA7XX_CORE_IOPAD(pa, val) (((pa) & 0xffff) - 0x3400) (val)
+
#endif
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index 1394925..8100de1 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -63,8 +63,6 @@
#define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
#define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define AM4372_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define DRA7XX_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x3400) (val)
/*
* Macros to allow using the offset from the padconf physical address
diff --git a/include/dt-bindings/reset-controller/mt8135-resets.h b/include/dt-bindings/reset/mt8135-resets.h
similarity index 100%
rename from include/dt-bindings/reset-controller/mt8135-resets.h
rename to include/dt-bindings/reset/mt8135-resets.h
diff --git a/include/dt-bindings/reset-controller/mt8173-resets.h b/include/dt-bindings/reset/mt8173-resets.h
similarity index 100%
rename from include/dt-bindings/reset-controller/mt8173-resets.h
rename to include/dt-bindings/reset/mt8173-resets.h
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index e2878ba..4299f4b 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -72,7 +72,7 @@
struct edma_rsv_info *rsv;
/* List of channels allocated for memcpy, terminated with -1 */
- s16 *memcpy_channels;
+ s32 *memcpy_channels;
s8 (*queue_priority_mapping)[2];
const s16 (*xbar_chans)[2];