| /* |
| * Intel IXP4xx HSS (synchronous serial port) driver for Linux |
| * |
| * Copyright (C) 2007-2008 Krzysztof HaĆasa <khc@pm.waw.pl> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License |
| * as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/cdev.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmapool.h> |
| #include <linux/fs.h> |
| #include <linux/hdlc.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/poll.h> |
| #include <linux/slab.h> |
| #include <mach/npe.h> |
| #include <mach/qmgr.h> |
| |
| #define DEBUG_DESC 0 |
| #define DEBUG_RX 0 |
| #define DEBUG_TX 0 |
| #define DEBUG_PKT_BYTES 0 |
| #define DEBUG_CLOSE 0 |
| |
| #define DRV_NAME "ixp4xx_hss" |
| |
| #define PKT_EXTRA_FLAGS 0 /* orig 1 */ |
| #define PKT_NUM_PIPES 1 /* 1, 2 or 4 */ |
| #define PKT_PIPE_FIFO_SIZEW 4 /* total 4 dwords per HSS */ |
| |
| #define RX_DESCS 16 /* also length of all RX queues */ |
| #define TX_DESCS 16 /* also length of all TX queues */ |
| |
| #define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS)) |
| #define RX_SIZE (HDLC_MAX_MRU + 4) /* NPE needs more space */ |
| #define MAX_CLOSE_WAIT 1000 /* microseconds */ |
| #define HSS_COUNT 2 |
| #define FRAME_SIZE 256 /* doesn't matter at this point */ |
| #define FRAME_OFFSET 0 |
| #define MAX_CHANNELS (FRAME_SIZE / 8) |
| |
| #define NAPI_WEIGHT 16 |
| |
| /* Queue IDs */ |
| #define HSS0_CHL_RXTRIG_QUEUE 12 /* orig size = 32 dwords */ |
| #define HSS0_PKT_RX_QUEUE 13 /* orig size = 32 dwords */ |
| #define HSS0_PKT_TX0_QUEUE 14 /* orig size = 16 dwords */ |
| #define HSS0_PKT_TX1_QUEUE 15 |
| #define HSS0_PKT_TX2_QUEUE 16 |
| #define HSS0_PKT_TX3_QUEUE 17 |
| #define HSS0_PKT_RXFREE0_QUEUE 18 /* orig size = 16 dwords */ |
| #define HSS0_PKT_RXFREE1_QUEUE 19 |
| #define HSS0_PKT_RXFREE2_QUEUE 20 |
| #define HSS0_PKT_RXFREE3_QUEUE 21 |
| #define HSS0_PKT_TXDONE_QUEUE 22 /* orig size = 64 dwords */ |
| |
| #define HSS1_CHL_RXTRIG_QUEUE 10 |
| #define HSS1_PKT_RX_QUEUE 0 |
| #define HSS1_PKT_TX0_QUEUE 5 |
| #define HSS1_PKT_TX1_QUEUE 6 |
| #define HSS1_PKT_TX2_QUEUE 7 |
| #define HSS1_PKT_TX3_QUEUE 8 |
| #define HSS1_PKT_RXFREE0_QUEUE 1 |
| #define HSS1_PKT_RXFREE1_QUEUE 2 |
| #define HSS1_PKT_RXFREE2_QUEUE 3 |
| #define HSS1_PKT_RXFREE3_QUEUE 4 |
| #define HSS1_PKT_TXDONE_QUEUE 9 |
| |
| #define NPE_PKT_MODE_HDLC 0 |
| #define NPE_PKT_MODE_RAW 1 |
| #define NPE_PKT_MODE_56KMODE 2 |
| #define NPE_PKT_MODE_56KENDIAN_MSB 4 |
| |
| /* PKT_PIPE_HDLC_CFG_WRITE flags */ |
| #define PKT_HDLC_IDLE_ONES 0x1 /* default = flags */ |
| #define PKT_HDLC_CRC_32 0x2 /* default = CRC-16 */ |
| #define PKT_HDLC_MSB_ENDIAN 0x4 /* default = LE */ |
| |
| |
| /* hss_config, PCRs */ |
| /* Frame sync sampling, default = active low */ |
| #define PCR_FRM_SYNC_ACTIVE_HIGH 0x40000000 |
| #define PCR_FRM_SYNC_FALLINGEDGE 0x80000000 |
| #define PCR_FRM_SYNC_RISINGEDGE 0xC0000000 |
| |
| /* Frame sync pin: input (default) or output generated off a given clk edge */ |
| #define PCR_FRM_SYNC_OUTPUT_FALLING 0x20000000 |
| #define PCR_FRM_SYNC_OUTPUT_RISING 0x30000000 |
| |
| /* Frame and data clock sampling on edge, default = falling */ |
| #define PCR_FCLK_EDGE_RISING 0x08000000 |
| #define PCR_DCLK_EDGE_RISING 0x04000000 |
| |
| /* Clock direction, default = input */ |
| #define PCR_SYNC_CLK_DIR_OUTPUT 0x02000000 |
| |
| /* Generate/Receive frame pulses, default = enabled */ |
| #define PCR_FRM_PULSE_DISABLED 0x01000000 |
| |
| /* Data rate is full (default) or half the configured clk speed */ |
| #define PCR_HALF_CLK_RATE 0x00200000 |
| |
| /* Invert data between NPE and HSS FIFOs? (default = no) */ |
| #define PCR_DATA_POLARITY_INVERT 0x00100000 |
| |
| /* TX/RX endianness, default = LSB */ |
| #define PCR_MSB_ENDIAN 0x00080000 |
| |
| /* Normal (default) / open drain mode (TX only) */ |
| #define PCR_TX_PINS_OPEN_DRAIN 0x00040000 |
| |
| /* No framing bit transmitted and expected on RX? (default = framing bit) */ |
| #define PCR_SOF_NO_FBIT 0x00020000 |
| |
| /* Drive data pins? */ |
| #define PCR_TX_DATA_ENABLE 0x00010000 |
| |
| /* Voice 56k type: drive the data pins low (default), high, high Z */ |
| #define PCR_TX_V56K_HIGH 0x00002000 |
| #define PCR_TX_V56K_HIGH_IMP 0x00004000 |
| |
| /* Unassigned type: drive the data pins low (default), high, high Z */ |
| #define PCR_TX_UNASS_HIGH 0x00000800 |
| #define PCR_TX_UNASS_HIGH_IMP 0x00001000 |
| |
| /* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */ |
| #define PCR_TX_FB_HIGH_IMP 0x00000400 |
| |
| /* 56k data endiannes - which bit unused: high (default) or low */ |
| #define PCR_TX_56KE_BIT_0_UNUSED 0x00000200 |
| |
| /* 56k data transmission type: 32/8 bit data (default) or 56K data */ |
| #define PCR_TX_56KS_56K_DATA 0x00000100 |
| |
| /* hss_config, cCR */ |
| /* Number of packetized clients, default = 1 */ |
| #define CCR_NPE_HFIFO_2_HDLC 0x04000000 |
| #define CCR_NPE_HFIFO_3_OR_4HDLC 0x08000000 |
| |
| /* default = no loopback */ |
| #define CCR_LOOPBACK 0x02000000 |
| |
| /* HSS number, default = 0 (first) */ |
| #define CCR_SECOND_HSS 0x01000000 |
| |
| |
| /* hss_config, clkCR: main:10, num:10, denom:12 */ |
| #define CLK42X_SPEED_EXP ((0x3FF << 22) | ( 2 << 12) | 15) /*65 KHz*/ |
| |
| #define CLK42X_SPEED_512KHZ (( 130 << 22) | ( 2 << 12) | 15) |
| #define CLK42X_SPEED_1536KHZ (( 43 << 22) | ( 18 << 12) | 47) |
| #define CLK42X_SPEED_1544KHZ (( 43 << 22) | ( 33 << 12) | 192) |
| #define CLK42X_SPEED_2048KHZ (( 32 << 22) | ( 34 << 12) | 63) |
| #define CLK42X_SPEED_4096KHZ (( 16 << 22) | ( 34 << 12) | 127) |
| #define CLK42X_SPEED_8192KHZ (( 8 << 22) | ( 34 << 12) | 255) |
| |
| #define CLK46X_SPEED_512KHZ (( 130 << 22) | ( 24 << 12) | 127) |
| #define CLK46X_SPEED_1536KHZ (( 43 << 22) | (152 << 12) | 383) |
| #define CLK46X_SPEED_1544KHZ (( 43 << 22) | ( 66 << 12) | 385) |
| #define CLK46X_SPEED_2048KHZ (( 32 << 22) | (280 << 12) | 511) |
| #define CLK46X_SPEED_4096KHZ (( 16 << 22) | (280 << 12) | 1023) |
| #define CLK46X_SPEED_8192KHZ (( 8 << 22) | (280 << 12) | 2047) |
| |
| /* |
| * HSS_CONFIG_CLOCK_CR register consists of 3 parts: |
| * A (10 bits), B (10 bits) and C (12 bits). |
| * IXP42x HSS clock generator operation (verified with an oscilloscope): |
| * Each clock bit takes 7.5 ns (1 / 133.xx MHz). |
| * The clock sequence consists of (C - B) states of 0s and 1s, each state is |
| * A bits wide. It's followed by (B + 1) states of 0s and 1s, each state is |
| * (A + 1) bits wide. |
| * |
| * The resulting average clock frequency (assuming 33.333 MHz oscillator) is: |
| * freq = 66.666 MHz / (A + (B + 1) / (C + 1)) |
| * minumum freq = 66.666 MHz / (A + 1) |
| * maximum freq = 66.666 MHz / A |
| * |
| * Example: A = 2, B = 2, C = 7, CLOCK_CR register = 2 << 22 | 2 << 12 | 7 |
| * freq = 66.666 MHz / (2 + (2 + 1) / (7 + 1)) = 28.07 MHz (Mb/s). |
| * The clock sequence is: 1100110011 (5 doubles) 000111000 (3 triples). |
| * The sequence takes (C - B) * A + (B + 1) * (A + 1) = 5 * 2 + 3 * 3 bits |
| * = 19 bits (each 7.5 ns long) = 142.5 ns (then the sequence repeats). |
| * The sequence consists of 4 complete clock periods, thus the average |
| * frequency (= clock rate) is 4 / 142.5 ns = 28.07 MHz (Mb/s). |
| * (max specified clock rate for IXP42x HSS is 8.192 Mb/s). |
| */ |
| |
| /* hss_config, LUT entries */ |
| #define TDMMAP_UNASSIGNED 0 |
| #define TDMMAP_HDLC 1 /* HDLC - packetized */ |
| #define TDMMAP_VOICE56K 2 /* Voice56K - 7-bit channelized */ |
| #define TDMMAP_VOICE64K 3 /* Voice64K - 8-bit channelized */ |
| |
| /* offsets into HSS config */ |
| #define HSS_CONFIG_TX_PCR 0x00 /* port configuration registers */ |
| #define HSS_CONFIG_RX_PCR 0x04 |
| #define HSS_CONFIG_CORE_CR 0x08 /* loopback control, HSS# */ |
| #define HSS_CONFIG_CLOCK_CR 0x0C /* clock generator control */ |
| #define HSS_CONFIG_TX_FCR 0x10 /* frame configuration registers */ |
| #define HSS_CONFIG_RX_FCR 0x14 |
| #define HSS_CONFIG_TX_LUT 0x18 /* channel look-up tables */ |
| #define HSS_CONFIG_RX_LUT 0x38 |
| |
| |
| /* NPE command codes */ |
| /* writes the ConfigWord value to the location specified by offset */ |
| #define PORT_CONFIG_WRITE 0x40 |
| |
| /* triggers the NPE to load the contents of the configuration table */ |
| #define PORT_CONFIG_LOAD 0x41 |
| |
| /* triggers the NPE to return an HssErrorReadResponse message */ |
| #define PORT_ERROR_READ 0x42 |
| |
| /* triggers the NPE to reset internal status and enable the HssPacketized |
| operation for the flow specified by pPipe */ |
| #define PKT_PIPE_FLOW_ENABLE 0x50 |
| #define PKT_PIPE_FLOW_DISABLE 0x51 |
| #define PKT_NUM_PIPES_WRITE 0x52 |
| #define PKT_PIPE_FIFO_SIZEW_WRITE 0x53 |
| #define PKT_PIPE_HDLC_CFG_WRITE 0x54 |
| #define PKT_PIPE_IDLE_PATTERN_WRITE 0x55 |
| #define PKT_PIPE_RX_SIZE_WRITE 0x56 |
| #define PKT_PIPE_MODE_WRITE 0x57 |
| |
| /* HDLC packet status values - desc->status */ |
| #define ERR_SHUTDOWN 1 /* stop or shutdown occurrance */ |
| #define ERR_HDLC_ALIGN 2 /* HDLC alignment error */ |
| #define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */ |
| #define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving |
| this packet (if buf_len < pkt_len) */ |
| #define ERR_HDLC_TOO_LONG 5 /* HDLC frame size too long */ |
| #define ERR_HDLC_ABORT 6 /* abort sequence received */ |
| #define ERR_DISCONNECTING 7 /* disconnect is in progress */ |
| |
| |
| #ifdef __ARMEB__ |
| typedef struct sk_buff buffer_t; |
| #define free_buffer dev_kfree_skb |
| #define free_buffer_irq dev_kfree_skb_irq |
| #else |
| typedef void buffer_t; |
| #define free_buffer kfree |
| #define free_buffer_irq kfree |
| #endif |
| |
| struct port { |
| struct device *dev; |
| struct npe *npe; |
| struct net_device *netdev; |
| struct napi_struct napi; |
| struct hss_plat_info *plat; |
| buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS]; |
| struct desc *desc_tab; /* coherent */ |
| u32 desc_tab_phys; |
| unsigned int id; |
| unsigned int clock_type, clock_rate, loopback; |
| unsigned int initialized, carrier; |
| u8 hdlc_cfg; |
| u32 clock_reg; |
| }; |
| |
| /* NPE message structure */ |
| struct msg { |
| #ifdef __ARMEB__ |
| u8 cmd, unused, hss_port, index; |
| union { |
| struct { u8 data8a, data8b, data8c, data8d; }; |
| struct { u16 data16a, data16b; }; |
| struct { u32 data32; }; |
| }; |
| #else |
| u8 index, hss_port, unused, cmd; |
| union { |
| struct { u8 data8d, data8c, data8b, data8a; }; |
| struct { u16 data16b, data16a; }; |
| struct { u32 data32; }; |
| }; |
| #endif |
| }; |
| |
| /* HDLC packet descriptor */ |
| struct desc { |
| u32 next; /* pointer to next buffer, unused */ |
| |
| #ifdef __ARMEB__ |
| u16 buf_len; /* buffer length */ |
| u16 pkt_len; /* packet length */ |
| u32 data; /* pointer to data buffer in RAM */ |
| u8 status; |
| u8 error_count; |
| u16 __reserved; |
| #else |
| u16 pkt_len; /* packet length */ |
| u16 buf_len; /* buffer length */ |
| u32 data; /* pointer to data buffer in RAM */ |
| u16 __reserved; |
| u8 error_count; |
| u8 status; |
| #endif |
| u32 __reserved1[4]; |
| }; |
| |
| |
| #define rx_desc_phys(port, n) ((port)->desc_tab_phys + \ |
| (n) * sizeof(struct desc)) |
| #define rx_desc_ptr(port, n) (&(port)->desc_tab[n]) |
| |
| #define tx_desc_phys(port, n) ((port)->desc_tab_phys + \ |
| ((n) + RX_DESCS) * sizeof(struct desc)) |
| #define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS]) |
| |
| /***************************************************************************** |
| * global variables |
| ****************************************************************************/ |
| |
| static int ports_open; |
| static struct dma_pool *dma_pool; |
| static spinlock_t npe_lock; |
| |
| static const struct { |
| int tx, txdone, rx, rxfree; |
| }queue_ids[2] = {{HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE, HSS0_PKT_RX_QUEUE, |
| HSS0_PKT_RXFREE0_QUEUE}, |
| {HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE, HSS1_PKT_RX_QUEUE, |
| HSS1_PKT_RXFREE0_QUEUE}, |
| }; |
| |
| /***************************************************************************** |
| * utility functions |
| ****************************************************************************/ |
| |
| static inline struct port* dev_to_port(struct net_device *dev) |
| { |
| return dev_to_hdlc(dev)->priv; |
| } |
| |
| #ifndef __ARMEB__ |
| static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt) |
| { |
| int i; |
| for (i = 0; i < cnt; i++) |
| dest[i] = swab32(src[i]); |
| } |
| #endif |
| |
| /***************************************************************************** |
| * HSS access |
| ****************************************************************************/ |
| |
| static void hss_npe_send(struct port *port, struct msg *msg, const char* what) |
| { |
| u32 *val = (u32*)msg; |
| if (npe_send_message(port->npe, msg, what)) { |
| printk(KERN_CRIT "HSS-%i: unable to send command [%08X:%08X]" |
| " to %s\n", port->id, val[0], val[1], |
| npe_name(port->npe)); |
| BUG(); |
| } |
| } |
| |
| static void hss_config_set_lut(struct port *port) |
| { |
| struct msg msg; |
| int ch; |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = PORT_CONFIG_WRITE; |
| msg.hss_port = port->id; |
| |
| for (ch = 0; ch < MAX_CHANNELS; ch++) { |
| msg.data32 >>= 2; |
| msg.data32 |= TDMMAP_HDLC << 30; |
| |
| if (ch % 16 == 15) { |
| msg.index = HSS_CONFIG_TX_LUT + ((ch / 4) & ~3); |
| hss_npe_send(port, &msg, "HSS_SET_TX_LUT"); |
| |
| msg.index += HSS_CONFIG_RX_LUT - HSS_CONFIG_TX_LUT; |
| hss_npe_send(port, &msg, "HSS_SET_RX_LUT"); |
| } |
| } |
| } |
| |
| static void hss_config(struct port *port) |
| { |
| struct msg msg; |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = PORT_CONFIG_WRITE; |
| msg.hss_port = port->id; |
| msg.index = HSS_CONFIG_TX_PCR; |
| msg.data32 = PCR_FRM_PULSE_DISABLED | PCR_MSB_ENDIAN | |
| PCR_TX_DATA_ENABLE | PCR_SOF_NO_FBIT; |
| if (port->clock_type == CLOCK_INT) |
| msg.data32 |= PCR_SYNC_CLK_DIR_OUTPUT; |
| hss_npe_send(port, &msg, "HSS_SET_TX_PCR"); |
| |
| msg.index = HSS_CONFIG_RX_PCR; |
| msg.data32 ^= PCR_TX_DATA_ENABLE | PCR_DCLK_EDGE_RISING; |
| hss_npe_send(port, &msg, "HSS_SET_RX_PCR"); |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = PORT_CONFIG_WRITE; |
| msg.hss_port = port->id; |
| msg.index = HSS_CONFIG_CORE_CR; |
| msg.data32 = (port->loopback ? CCR_LOOPBACK : 0) | |
| (port->id ? CCR_SECOND_HSS : 0); |
| hss_npe_send(port, &msg, "HSS_SET_CORE_CR"); |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = PORT_CONFIG_WRITE; |
| msg.hss_port = port->id; |
| msg.index = HSS_CONFIG_CLOCK_CR; |
| msg.data32 = port->clock_reg; |
| hss_npe_send(port, &msg, "HSS_SET_CLOCK_CR"); |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = PORT_CONFIG_WRITE; |
| msg.hss_port = port->id; |
| msg.index = HSS_CONFIG_TX_FCR; |
| msg.data16a = FRAME_OFFSET; |
| msg.data16b = FRAME_SIZE - 1; |
| hss_npe_send(port, &msg, "HSS_SET_TX_FCR"); |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = PORT_CONFIG_WRITE; |
| msg.hss_port = port->id; |
| msg.index = HSS_CONFIG_RX_FCR; |
| msg.data16a = FRAME_OFFSET; |
| msg.data16b = FRAME_SIZE - 1; |
| hss_npe_send(port, &msg, "HSS_SET_RX_FCR"); |
| |
| hss_config_set_lut(port); |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = PORT_CONFIG_LOAD; |
| msg.hss_port = port->id; |
| hss_npe_send(port, &msg, "HSS_LOAD_CONFIG"); |
| |
| if (npe_recv_message(port->npe, &msg, "HSS_LOAD_CONFIG") || |
| /* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */ |
| msg.cmd != PORT_CONFIG_LOAD || msg.data32) { |
| printk(KERN_CRIT "HSS-%i: HSS_LOAD_CONFIG failed\n", |
| port->id); |
| BUG(); |
| } |
| |
| /* HDLC may stop working without this - check FIXME */ |
| npe_recv_message(port->npe, &msg, "FLUSH_IT"); |
| } |
| |
| static void hss_set_hdlc_cfg(struct port *port) |
| { |
| struct msg msg; |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = PKT_PIPE_HDLC_CFG_WRITE; |
| msg.hss_port = port->id; |
| msg.data8a = port->hdlc_cfg; /* rx_cfg */ |
| msg.data8b = port->hdlc_cfg | (PKT_EXTRA_FLAGS << 3); /* tx_cfg */ |
| hss_npe_send(port, &msg, "HSS_SET_HDLC_CFG"); |
| } |
| |
| static u32 hss_get_status(struct port *port) |
| { |
| struct msg msg; |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = PORT_ERROR_READ; |
| msg.hss_port = port->id; |
| hss_npe_send(port, &msg, "PORT_ERROR_READ"); |
| if (npe_recv_message(port->npe, &msg, "PORT_ERROR_READ")) { |
| printk(KERN_CRIT "HSS-%i: unable to read HSS status\n", |
| port->id); |
| BUG(); |
| } |
| |
| return msg.data32; |
| } |
| |
| static void hss_start_hdlc(struct port *port) |
| { |
| struct msg msg; |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = PKT_PIPE_FLOW_ENABLE; |
| msg.hss_port = port->id; |
| msg.data32 = 0; |
| hss_npe_send(port, &msg, "HSS_ENABLE_PKT_PIPE"); |
| } |
| |
| static void hss_stop_hdlc(struct port *port) |
| { |
| struct msg msg; |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = PKT_PIPE_FLOW_DISABLE; |
| msg.hss_port = port->id; |
| hss_npe_send(port, &msg, "HSS_DISABLE_PKT_PIPE"); |
| hss_get_status(port); /* make sure it's halted */ |
| } |
| |
| static int hss_load_firmware(struct port *port) |
| { |
| struct msg msg; |
| int err; |
| |
| if (port->initialized) |
| return 0; |
| |
| if (!npe_running(port->npe) && |
| (err = npe_load_firmware(port->npe, npe_name(port->npe), |
| port->dev))) |
| return err; |
| |
| /* HDLC mode configuration */ |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = PKT_NUM_PIPES_WRITE; |
| msg.hss_port = port->id; |
| msg.data8a = PKT_NUM_PIPES; |
| hss_npe_send(port, &msg, "HSS_SET_PKT_PIPES"); |
| |
| msg.cmd = PKT_PIPE_FIFO_SIZEW_WRITE; |
| msg.data8a = PKT_PIPE_FIFO_SIZEW; |
| hss_npe_send(port, &msg, "HSS_SET_PKT_FIFO"); |
| |
| msg.cmd = PKT_PIPE_MODE_WRITE; |
| msg.data8a = NPE_PKT_MODE_HDLC; |
| /* msg.data8b = inv_mask */ |
| /* msg.data8c = or_mask */ |
| hss_npe_send(port, &msg, "HSS_SET_PKT_MODE"); |
| |
| msg.cmd = PKT_PIPE_RX_SIZE_WRITE; |
| msg.data16a = HDLC_MAX_MRU; /* including CRC */ |
| hss_npe_send(port, &msg, "HSS_SET_PKT_RX_SIZE"); |
| |
| msg.cmd = PKT_PIPE_IDLE_PATTERN_WRITE; |
| msg.data32 = 0x7F7F7F7F; /* ??? FIXME */ |
| hss_npe_send(port, &msg, "HSS_SET_PKT_IDLE"); |
| |
| port->initialized = 1; |
| return 0; |
| } |
| |
| /***************************************************************************** |
| * packetized (HDLC) operation |
| ****************************************************************************/ |
| |
| static inline void debug_pkt(struct net_device *dev, const char *func, |
| u8 *data, int len) |
| { |
| #if DEBUG_PKT_BYTES |
| int i; |
| |
| printk(KERN_DEBUG "%s: %s(%i)", dev->name, func, len); |
| for (i = 0; i < len; i++) { |
| if (i >= DEBUG_PKT_BYTES) |
| break; |
| printk("%s%02X", !(i % 4) ? " " : "", data[i]); |
| } |
| printk("\n"); |
| #endif |
| } |
| |
| |
| static inline void debug_desc(u32 phys, struct desc *desc) |
| { |
| #if DEBUG_DESC |
| printk(KERN_DEBUG "%X: %X %3X %3X %08X %X %X\n", |
| phys, desc->next, desc->buf_len, desc->pkt_len, |
| desc->data, desc->status, desc->error_count); |
| #endif |
| } |
| |
| static inline int queue_get_desc(unsigned int queue, struct port *port, |
| int is_tx) |
| { |
| u32 phys, tab_phys, n_desc; |
| struct desc *tab; |
| |
| if (!(phys = qmgr_get_entry(queue))) |
| return -1; |
| |
| BUG_ON(phys & 0x1F); |
| tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0); |
| tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0); |
| n_desc = (phys - tab_phys) / sizeof(struct desc); |
| BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS)); |
| debug_desc(phys, &tab[n_desc]); |
| BUG_ON(tab[n_desc].next); |
| return n_desc; |
| } |
| |
| static inline void queue_put_desc(unsigned int queue, u32 phys, |
| struct desc *desc) |
| { |
| debug_desc(phys, desc); |
| BUG_ON(phys & 0x1F); |
| qmgr_put_entry(queue, phys); |
| /* Don't check for queue overflow here, we've allocated sufficient |
| length and queues >= 32 don't support this check anyway. */ |
| } |
| |
| |
| static inline void dma_unmap_tx(struct port *port, struct desc *desc) |
| { |
| #ifdef __ARMEB__ |
| dma_unmap_single(&port->netdev->dev, desc->data, |
| desc->buf_len, DMA_TO_DEVICE); |
| #else |
| dma_unmap_single(&port->netdev->dev, desc->data & ~3, |
| ALIGN((desc->data & 3) + desc->buf_len, 4), |
| DMA_TO_DEVICE); |
| #endif |
| } |
| |
| |
| static void hss_hdlc_set_carrier(void *pdev, int carrier) |
| { |
| struct net_device *netdev = pdev; |
| struct port *port = dev_to_port(netdev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&npe_lock, flags); |
| port->carrier = carrier; |
| if (!port->loopback) { |
| if (carrier) |
| netif_carrier_on(netdev); |
| else |
| netif_carrier_off(netdev); |
| } |
| spin_unlock_irqrestore(&npe_lock, flags); |
| } |
| |
| static void hss_hdlc_rx_irq(void *pdev) |
| { |
| struct net_device *dev = pdev; |
| struct port *port = dev_to_port(dev); |
| |
| #if DEBUG_RX |
| printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name); |
| #endif |
| qmgr_disable_irq(queue_ids[port->id].rx); |
| napi_schedule(&port->napi); |
| } |
| |
| static int hss_hdlc_poll(struct napi_struct *napi, int budget) |
| { |
| struct port *port = container_of(napi, struct port, napi); |
| struct net_device *dev = port->netdev; |
| unsigned int rxq = queue_ids[port->id].rx; |
| unsigned int rxfreeq = queue_ids[port->id].rxfree; |
| int received = 0; |
| |
| #if DEBUG_RX |
| printk(KERN_DEBUG "%s: hss_hdlc_poll\n", dev->name); |
| #endif |
| |
| while (received < budget) { |
| struct sk_buff *skb; |
| struct desc *desc; |
| int n; |
| #ifdef __ARMEB__ |
| struct sk_buff *temp; |
| u32 phys; |
| #endif |
| |
| if ((n = queue_get_desc(rxq, port, 0)) < 0) { |
| #if DEBUG_RX |
| printk(KERN_DEBUG "%s: hss_hdlc_poll" |
| " napi_complete\n", dev->name); |
| #endif |
| napi_complete(napi); |
| qmgr_enable_irq(rxq); |
| if (!qmgr_stat_empty(rxq) && |
| napi_reschedule(napi)) { |
| #if DEBUG_RX |
| printk(KERN_DEBUG "%s: hss_hdlc_poll" |
| " napi_reschedule succeeded\n", |
| dev->name); |
| #endif |
| qmgr_disable_irq(rxq); |
| continue; |
| } |
| #if DEBUG_RX |
| printk(KERN_DEBUG "%s: hss_hdlc_poll all done\n", |
| dev->name); |
| #endif |
| return received; /* all work done */ |
| } |
| |
| desc = rx_desc_ptr(port, n); |
| #if 0 /* FIXME - error_count counts modulo 256, perhaps we should use it */ |
| if (desc->error_count) |
| printk(KERN_DEBUG "%s: hss_hdlc_poll status 0x%02X" |
| " errors %u\n", dev->name, desc->status, |
| desc->error_count); |
| #endif |
| skb = NULL; |
| switch (desc->status) { |
| case 0: |
| #ifdef __ARMEB__ |
| if ((skb = netdev_alloc_skb(dev, RX_SIZE)) != NULL) { |
| phys = dma_map_single(&dev->dev, skb->data, |
| RX_SIZE, |
| DMA_FROM_DEVICE); |
| if (dma_mapping_error(&dev->dev, phys)) { |
| dev_kfree_skb(skb); |
| skb = NULL; |
| } |
| } |
| #else |
| skb = netdev_alloc_skb(dev, desc->pkt_len); |
| #endif |
| if (!skb) |
| dev->stats.rx_dropped++; |
| break; |
| case ERR_HDLC_ALIGN: |
| case ERR_HDLC_ABORT: |
| dev->stats.rx_frame_errors++; |
| dev->stats.rx_errors++; |
| break; |
| case ERR_HDLC_FCS: |
| dev->stats.rx_crc_errors++; |
| dev->stats.rx_errors++; |
| break; |
| case ERR_HDLC_TOO_LONG: |
| dev->stats.rx_length_errors++; |
| dev->stats.rx_errors++; |
| break; |
| default: /* FIXME - remove printk */ |
| printk(KERN_ERR "%s: hss_hdlc_poll: status 0x%02X" |
| " errors %u\n", dev->name, desc->status, |
| desc->error_count); |
| dev->stats.rx_errors++; |
| } |
| |
| if (!skb) { |
| /* put the desc back on RX-ready queue */ |
| desc->buf_len = RX_SIZE; |
| desc->pkt_len = desc->status = 0; |
| queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc); |
| continue; |
| } |
| |
| /* process received frame */ |
| #ifdef __ARMEB__ |
| temp = skb; |
| skb = port->rx_buff_tab[n]; |
| dma_unmap_single(&dev->dev, desc->data, |
| RX_SIZE, DMA_FROM_DEVICE); |
| #else |
| dma_sync_single_for_cpu(&dev->dev, desc->data, |
| RX_SIZE, DMA_FROM_DEVICE); |
| memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n], |
| ALIGN(desc->pkt_len, 4) / 4); |
| #endif |
| skb_put(skb, desc->pkt_len); |
| |
| debug_pkt(dev, "hss_hdlc_poll", skb->data, skb->len); |
| |
| skb->protocol = hdlc_type_trans(skb, dev); |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += skb->len; |
| netif_receive_skb(skb); |
| |
| /* put the new buffer on RX-free queue */ |
| #ifdef __ARMEB__ |
| port->rx_buff_tab[n] = temp; |
| desc->data = phys; |
| #endif |
| desc->buf_len = RX_SIZE; |
| desc->pkt_len = 0; |
| queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc); |
| received++; |
| } |
| #if DEBUG_RX |
| printk(KERN_DEBUG "hss_hdlc_poll: end, not all work done\n"); |
| #endif |
| return received; /* not all work done */ |
| } |
| |
| |
| static void hss_hdlc_txdone_irq(void *pdev) |
| { |
| struct net_device *dev = pdev; |
| struct port *port = dev_to_port(dev); |
| int n_desc; |
| |
| #if DEBUG_TX |
| printk(KERN_DEBUG DRV_NAME ": hss_hdlc_txdone_irq\n"); |
| #endif |
| while ((n_desc = queue_get_desc(queue_ids[port->id].txdone, |
| port, 1)) >= 0) { |
| struct desc *desc; |
| int start; |
| |
| desc = tx_desc_ptr(port, n_desc); |
| |
| dev->stats.tx_packets++; |
| dev->stats.tx_bytes += desc->pkt_len; |
| |
| dma_unmap_tx(port, desc); |
| #if DEBUG_TX |
| printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq free %p\n", |
| dev->name, port->tx_buff_tab[n_desc]); |
| #endif |
| free_buffer_irq(port->tx_buff_tab[n_desc]); |
| port->tx_buff_tab[n_desc] = NULL; |
| |
| start = qmgr_stat_below_low_watermark(port->plat->txreadyq); |
| queue_put_desc(port->plat->txreadyq, |
| tx_desc_phys(port, n_desc), desc); |
| if (start) { /* TX-ready queue was empty */ |
| #if DEBUG_TX |
| printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit" |
| " ready\n", dev->name); |
| #endif |
| netif_wake_queue(dev); |
| } |
| } |
| } |
| |
| static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct port *port = dev_to_port(dev); |
| unsigned int txreadyq = port->plat->txreadyq; |
| int len, offset, bytes, n; |
| void *mem; |
| u32 phys; |
| struct desc *desc; |
| |
| #if DEBUG_TX |
| printk(KERN_DEBUG "%s: hss_hdlc_xmit\n", dev->name); |
| #endif |
| |
| if (unlikely(skb->len > HDLC_MAX_MRU)) { |
| dev_kfree_skb(skb); |
| dev->stats.tx_errors++; |
| return NETDEV_TX_OK; |
| } |
| |
| debug_pkt(dev, "hss_hdlc_xmit", skb->data, skb->len); |
| |
| len = skb->len; |
| #ifdef __ARMEB__ |
| offset = 0; /* no need to keep alignment */ |
| bytes = len; |
| mem = skb->data; |
| #else |
| offset = (int)skb->data & 3; /* keep 32-bit alignment */ |
| bytes = ALIGN(offset + len, 4); |
| if (!(mem = kmalloc(bytes, GFP_ATOMIC))) { |
| dev_kfree_skb(skb); |
| dev->stats.tx_dropped++; |
| return NETDEV_TX_OK; |
| } |
| memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4); |
| dev_kfree_skb(skb); |
| #endif |
| |
| phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE); |
| if (dma_mapping_error(&dev->dev, phys)) { |
| #ifdef __ARMEB__ |
| dev_kfree_skb(skb); |
| #else |
| kfree(mem); |
| #endif |
| dev->stats.tx_dropped++; |
| return NETDEV_TX_OK; |
| } |
| |
| n = queue_get_desc(txreadyq, port, 1); |
| BUG_ON(n < 0); |
| desc = tx_desc_ptr(port, n); |
| |
| #ifdef __ARMEB__ |
| port->tx_buff_tab[n] = skb; |
| #else |
| port->tx_buff_tab[n] = mem; |
| #endif |
| desc->data = phys + offset; |
| desc->buf_len = desc->pkt_len = len; |
| |
| wmb(); |
| queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc); |
| |
| if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */ |
| #if DEBUG_TX |
| printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name); |
| #endif |
| netif_stop_queue(dev); |
| /* we could miss TX ready interrupt */ |
| if (!qmgr_stat_below_low_watermark(txreadyq)) { |
| #if DEBUG_TX |
| printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n", |
| dev->name); |
| #endif |
| netif_wake_queue(dev); |
| } |
| } |
| |
| #if DEBUG_TX |
| printk(KERN_DEBUG "%s: hss_hdlc_xmit end\n", dev->name); |
| #endif |
| return NETDEV_TX_OK; |
| } |
| |
| |
| static int request_hdlc_queues(struct port *port) |
| { |
| int err; |
| |
| err = qmgr_request_queue(queue_ids[port->id].rxfree, RX_DESCS, 0, 0, |
| "%s:RX-free", port->netdev->name); |
| if (err) |
| return err; |
| |
| err = qmgr_request_queue(queue_ids[port->id].rx, RX_DESCS, 0, 0, |
| "%s:RX", port->netdev->name); |
| if (err) |
| goto rel_rxfree; |
| |
| err = qmgr_request_queue(queue_ids[port->id].tx, TX_DESCS, 0, 0, |
| "%s:TX", port->netdev->name); |
| if (err) |
| goto rel_rx; |
| |
| err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0, |
| "%s:TX-ready", port->netdev->name); |
| if (err) |
| goto rel_tx; |
| |
| err = qmgr_request_queue(queue_ids[port->id].txdone, TX_DESCS, 0, 0, |
| "%s:TX-done", port->netdev->name); |
| if (err) |
| goto rel_txready; |
| return 0; |
| |
| rel_txready: |
| qmgr_release_queue(port->plat->txreadyq); |
| rel_tx: |
| qmgr_release_queue(queue_ids[port->id].tx); |
| rel_rx: |
| qmgr_release_queue(queue_ids[port->id].rx); |
| rel_rxfree: |
| qmgr_release_queue(queue_ids[port->id].rxfree); |
| printk(KERN_DEBUG "%s: unable to request hardware queues\n", |
| port->netdev->name); |
| return err; |
| } |
| |
| static void release_hdlc_queues(struct port *port) |
| { |
| qmgr_release_queue(queue_ids[port->id].rxfree); |
| qmgr_release_queue(queue_ids[port->id].rx); |
| qmgr_release_queue(queue_ids[port->id].txdone); |
| qmgr_release_queue(queue_ids[port->id].tx); |
| qmgr_release_queue(port->plat->txreadyq); |
| } |
| |
| static int init_hdlc_queues(struct port *port) |
| { |
| int i; |
| |
| if (!ports_open) |
| if (!(dma_pool = dma_pool_create(DRV_NAME, NULL, |
| POOL_ALLOC_SIZE, 32, 0))) |
| return -ENOMEM; |
| |
| if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL, |
| &port->desc_tab_phys))) |
| return -ENOMEM; |
| memset(port->desc_tab, 0, POOL_ALLOC_SIZE); |
| memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */ |
| memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab)); |
| |
| /* Setup RX buffers */ |
| for (i = 0; i < RX_DESCS; i++) { |
| struct desc *desc = rx_desc_ptr(port, i); |
| buffer_t *buff; |
| void *data; |
| #ifdef __ARMEB__ |
| if (!(buff = netdev_alloc_skb(port->netdev, RX_SIZE))) |
| return -ENOMEM; |
| data = buff->data; |
| #else |
| if (!(buff = kmalloc(RX_SIZE, GFP_KERNEL))) |
| return -ENOMEM; |
| data = buff; |
| #endif |
| desc->buf_len = RX_SIZE; |
| desc->data = dma_map_single(&port->netdev->dev, data, |
| RX_SIZE, DMA_FROM_DEVICE); |
| if (dma_mapping_error(&port->netdev->dev, desc->data)) { |
| free_buffer(buff); |
| return -EIO; |
| } |
| port->rx_buff_tab[i] = buff; |
| } |
| |
| return 0; |
| } |
| |
| static void destroy_hdlc_queues(struct port *port) |
| { |
| int i; |
| |
| if (port->desc_tab) { |
| for (i = 0; i < RX_DESCS; i++) { |
| struct desc *desc = rx_desc_ptr(port, i); |
| buffer_t *buff = port->rx_buff_tab[i]; |
| if (buff) { |
| dma_unmap_single(&port->netdev->dev, |
| desc->data, RX_SIZE, |
| DMA_FROM_DEVICE); |
| free_buffer(buff); |
| } |
| } |
| for (i = 0; i < TX_DESCS; i++) { |
| struct desc *desc = tx_desc_ptr(port, i); |
| buffer_t *buff = port->tx_buff_tab[i]; |
| if (buff) { |
| dma_unmap_tx(port, desc); |
| free_buffer(buff); |
| } |
| } |
| dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys); |
| port->desc_tab = NULL; |
| } |
| |
| if (!ports_open && dma_pool) { |
| dma_pool_destroy(dma_pool); |
| dma_pool = NULL; |
| } |
| } |
| |
| static int hss_hdlc_open(struct net_device *dev) |
| { |
| struct port *port = dev_to_port(dev); |
| unsigned long flags; |
| int i, err = 0; |
| |
| if ((err = hdlc_open(dev))) |
| return err; |
| |
| if ((err = hss_load_firmware(port))) |
| goto err_hdlc_close; |
| |
| if ((err = request_hdlc_queues(port))) |
| goto err_hdlc_close; |
| |
| if ((err = init_hdlc_queues(port))) |
| goto err_destroy_queues; |
| |
| spin_lock_irqsave(&npe_lock, flags); |
| if (port->plat->open) |
| if ((err = port->plat->open(port->id, dev, |
| hss_hdlc_set_carrier))) |
| goto err_unlock; |
| spin_unlock_irqrestore(&npe_lock, flags); |
| |
| /* Populate queues with buffers, no failure after this point */ |
| for (i = 0; i < TX_DESCS; i++) |
| queue_put_desc(port->plat->txreadyq, |
| tx_desc_phys(port, i), tx_desc_ptr(port, i)); |
| |
| for (i = 0; i < RX_DESCS; i++) |
| queue_put_desc(queue_ids[port->id].rxfree, |
| rx_desc_phys(port, i), rx_desc_ptr(port, i)); |
| |
| napi_enable(&port->napi); |
| netif_start_queue(dev); |
| |
| qmgr_set_irq(queue_ids[port->id].rx, QUEUE_IRQ_SRC_NOT_EMPTY, |
| hss_hdlc_rx_irq, dev); |
| |
| qmgr_set_irq(queue_ids[port->id].txdone, QUEUE_IRQ_SRC_NOT_EMPTY, |
| hss_hdlc_txdone_irq, dev); |
| qmgr_enable_irq(queue_ids[port->id].txdone); |
| |
| ports_open++; |
| |
| hss_set_hdlc_cfg(port); |
| hss_config(port); |
| |
| hss_start_hdlc(port); |
| |
| /* we may already have RX data, enables IRQ */ |
| napi_schedule(&port->napi); |
| return 0; |
| |
| err_unlock: |
| spin_unlock_irqrestore(&npe_lock, flags); |
| err_destroy_queues: |
| destroy_hdlc_queues(port); |
| release_hdlc_queues(port); |
| err_hdlc_close: |
| hdlc_close(dev); |
| return err; |
| } |
| |
| static int hss_hdlc_close(struct net_device *dev) |
| { |
| struct port *port = dev_to_port(dev); |
| unsigned long flags; |
| int i, buffs = RX_DESCS; /* allocated RX buffers */ |
| |
| spin_lock_irqsave(&npe_lock, flags); |
| ports_open--; |
| qmgr_disable_irq(queue_ids[port->id].rx); |
| netif_stop_queue(dev); |
| napi_disable(&port->napi); |
| |
| hss_stop_hdlc(port); |
| |
| while (queue_get_desc(queue_ids[port->id].rxfree, port, 0) >= 0) |
| buffs--; |
| while (queue_get_desc(queue_ids[port->id].rx, port, 0) >= 0) |
| buffs--; |
| |
| if (buffs) |
| printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)" |
| " left in NPE\n", dev->name, buffs); |
| |
| buffs = TX_DESCS; |
| while (queue_get_desc(queue_ids[port->id].tx, port, 1) >= 0) |
| buffs--; /* cancel TX */ |
| |
| i = 0; |
| do { |
| while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0) |
| buffs--; |
| if (!buffs) |
| break; |
| } while (++i < MAX_CLOSE_WAIT); |
| |
| if (buffs) |
| printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) " |
| "left in NPE\n", dev->name, buffs); |
| #if DEBUG_CLOSE |
| if (!buffs) |
| printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i); |
| #endif |
| qmgr_disable_irq(queue_ids[port->id].txdone); |
| |
| if (port->plat->close) |
| port->plat->close(port->id, dev); |
| spin_unlock_irqrestore(&npe_lock, flags); |
| |
| destroy_hdlc_queues(port); |
| release_hdlc_queues(port); |
| hdlc_close(dev); |
| return 0; |
| } |
| |
| |
| static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding, |
| unsigned short parity) |
| { |
| struct port *port = dev_to_port(dev); |
| |
| if (encoding != ENCODING_NRZ) |
| return -EINVAL; |
| |
| switch(parity) { |
| case PARITY_CRC16_PR1_CCITT: |
| port->hdlc_cfg = 0; |
| return 0; |
| |
| case PARITY_CRC32_PR1_CCITT: |
| port->hdlc_cfg = PKT_HDLC_CRC_32; |
| return 0; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static u32 check_clock(u32 rate, u32 a, u32 b, u32 c, |
| u32 *best, u32 *best_diff, u32 *reg) |
| { |
| /* a is 10-bit, b is 10-bit, c is 12-bit */ |
| u64 new_rate; |
| u32 new_diff; |
| |
| new_rate = ixp4xx_timer_freq * (u64)(c + 1); |
| do_div(new_rate, a * (c + 1) + b + 1); |
| new_diff = abs((u32)new_rate - rate); |
| |
| if (new_diff < *best_diff) { |
| *best = new_rate; |
| *best_diff = new_diff; |
| *reg = (a << 22) | (b << 12) | c; |
| } |
| return new_diff; |
| } |
| |
| static void find_best_clock(u32 rate, u32 *best, u32 *reg) |
| { |
| u32 a, b, diff = 0xFFFFFFFF; |
| |
| a = ixp4xx_timer_freq / rate; |
| |
| if (a > 0x3FF) { /* 10-bit value - we can go as slow as ca. 65 kb/s */ |
| check_clock(rate, 0x3FF, 1, 1, best, &diff, reg); |
| return; |
| } |
| if (a == 0) { /* > 66.666 MHz */ |
| a = 1; /* minimum divider is 1 (a = 0, b = 1, c = 1) */ |
| rate = ixp4xx_timer_freq; |
| } |
| |
| if (rate * a == ixp4xx_timer_freq) { /* don't divide by 0 later */ |
| check_clock(rate, a - 1, 1, 1, best, &diff, reg); |
| return; |
| } |
| |
| for (b = 0; b < 0x400; b++) { |
| u64 c = (b + 1) * (u64)rate; |
| do_div(c, ixp4xx_timer_freq - rate * a); |
| c--; |
| if (c >= 0xFFF) { /* 12-bit - no need to check more 'b's */ |
| if (b == 0 && /* also try a bit higher rate */ |
| !check_clock(rate, a - 1, 1, 1, best, &diff, reg)) |
| return; |
| check_clock(rate, a, b, 0xFFF, best, &diff, reg); |
| return; |
| } |
| if (!check_clock(rate, a, b, c, best, &diff, reg)) |
| return; |
| if (!check_clock(rate, a, b, c + 1, best, &diff, reg)) |
| return; |
| } |
| } |
| |
| static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| { |
| const size_t size = sizeof(sync_serial_settings); |
| sync_serial_settings new_line; |
| sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; |
| struct port *port = dev_to_port(dev); |
| unsigned long flags; |
| int clk; |
| |
| if (cmd != SIOCWANDEV) |
| return hdlc_ioctl(dev, ifr, cmd); |
| |
| switch(ifr->ifr_settings.type) { |
| case IF_GET_IFACE: |
| ifr->ifr_settings.type = IF_IFACE_V35; |
| if (ifr->ifr_settings.size < size) { |
| ifr->ifr_settings.size = size; /* data size wanted */ |
| return -ENOBUFS; |
| } |
| memset(&new_line, 0, sizeof(new_line)); |
| new_line.clock_type = port->clock_type; |
| new_line.clock_rate = port->clock_rate; |
| new_line.loopback = port->loopback; |
| if (copy_to_user(line, &new_line, size)) |
| return -EFAULT; |
| return 0; |
| |
| case IF_IFACE_SYNC_SERIAL: |
| case IF_IFACE_V35: |
| if(!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| if (copy_from_user(&new_line, line, size)) |
| return -EFAULT; |
| |
| clk = new_line.clock_type; |
| if (port->plat->set_clock) |
| clk = port->plat->set_clock(port->id, clk); |
| |
| if (clk != CLOCK_EXT && clk != CLOCK_INT) |
| return -EINVAL; /* No such clock setting */ |
| |
| if (new_line.loopback != 0 && new_line.loopback != 1) |
| return -EINVAL; |
| |
| port->clock_type = clk; /* Update settings */ |
| if (clk == CLOCK_INT) |
| find_best_clock(new_line.clock_rate, &port->clock_rate, |
| &port->clock_reg); |
| else { |
| port->clock_rate = 0; |
| port->clock_reg = CLK42X_SPEED_2048KHZ; |
| } |
| port->loopback = new_line.loopback; |
| |
| spin_lock_irqsave(&npe_lock, flags); |
| |
| if (dev->flags & IFF_UP) |
| hss_config(port); |
| |
| if (port->loopback || port->carrier) |
| netif_carrier_on(port->netdev); |
| else |
| netif_carrier_off(port->netdev); |
| spin_unlock_irqrestore(&npe_lock, flags); |
| |
| return 0; |
| |
| default: |
| return hdlc_ioctl(dev, ifr, cmd); |
| } |
| } |
| |
| /***************************************************************************** |
| * initialization |
| ****************************************************************************/ |
| |
| static const struct net_device_ops hss_hdlc_ops = { |
| .ndo_open = hss_hdlc_open, |
| .ndo_stop = hss_hdlc_close, |
| .ndo_change_mtu = hdlc_change_mtu, |
| .ndo_start_xmit = hdlc_start_xmit, |
| .ndo_do_ioctl = hss_hdlc_ioctl, |
| }; |
| |
| static int __devinit hss_init_one(struct platform_device *pdev) |
| { |
| struct port *port; |
| struct net_device *dev; |
| hdlc_device *hdlc; |
| int err; |
| |
| if ((port = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL) |
| return -ENOMEM; |
| |
| if ((port->npe = npe_request(0)) == NULL) { |
| err = -ENODEV; |
| goto err_free; |
| } |
| |
| if ((port->netdev = dev = alloc_hdlcdev(port)) == NULL) { |
| err = -ENOMEM; |
| goto err_plat; |
| } |
| |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| hdlc = dev_to_hdlc(dev); |
| hdlc->attach = hss_hdlc_attach; |
| hdlc->xmit = hss_hdlc_xmit; |
| dev->netdev_ops = &hss_hdlc_ops; |
| dev->tx_queue_len = 100; |
| port->clock_type = CLOCK_EXT; |
| port->clock_rate = 0; |
| port->clock_reg = CLK42X_SPEED_2048KHZ; |
| port->id = pdev->id; |
| port->dev = &pdev->dev; |
| port->plat = pdev->dev.platform_data; |
| netif_napi_add(dev, &port->napi, hss_hdlc_poll, NAPI_WEIGHT); |
| |
| if ((err = register_hdlc_device(dev))) |
| goto err_free_netdev; |
| |
| platform_set_drvdata(pdev, port); |
| |
| printk(KERN_INFO "%s: HSS-%i\n", dev->name, port->id); |
| return 0; |
| |
| err_free_netdev: |
| free_netdev(dev); |
| err_plat: |
| npe_release(port->npe); |
| err_free: |
| kfree(port); |
| return err; |
| } |
| |
| static int __devexit hss_remove_one(struct platform_device *pdev) |
| { |
| struct port *port = platform_get_drvdata(pdev); |
| |
| unregister_hdlc_device(port->netdev); |
| free_netdev(port->netdev); |
| npe_release(port->npe); |
| platform_set_drvdata(pdev, NULL); |
| kfree(port); |
| return 0; |
| } |
| |
| static struct platform_driver ixp4xx_hss_driver = { |
| .driver.name = DRV_NAME, |
| .probe = hss_init_one, |
| .remove = hss_remove_one, |
| }; |
| |
| static int __init hss_init_module(void) |
| { |
| if ((ixp4xx_read_feature_bits() & |
| (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) != |
| (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) |
| return -ENODEV; |
| |
| spin_lock_init(&npe_lock); |
| |
| return platform_driver_register(&ixp4xx_hss_driver); |
| } |
| |
| static void __exit hss_cleanup_module(void) |
| { |
| platform_driver_unregister(&ixp4xx_hss_driver); |
| } |
| |
| MODULE_AUTHOR("Krzysztof Halasa"); |
| MODULE_DESCRIPTION("Intel IXP4xx HSS driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:ixp4xx_hss"); |
| module_init(hss_init_module); |
| module_exit(hss_cleanup_module); |