blob: 4b7d97275c621af5a219856d38f489a3e704b2e7 [file] [log] [blame]
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Qualcomm Technologies, Inc. IPQ4019";
compatible = "qcom,ipq4019";
interrupt-parent = <&intc>;
aliases {
spi0 = &spi_0;
i2c0 = &i2c_0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
enable-method = "qcom,kpss-acc-v1";
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
reg = <0x0>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
operating-points = <
/* kHz uV (fixed) */
48000 1100000
200000 1100000
500000 1100000
666000 1100000
>;
clock-latency = <256000>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
enable-method = "qcom,kpss-acc-v1";
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
reg = <0x1>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
enable-method = "qcom,kpss-acc-v1";
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
reg = <0x2>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
enable-method = "qcom,kpss-acc-v1";
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
reg = <0x3>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
};
};
pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
};
clocks {
sleep_clk: sleep_clk {
compatible = "fixed-clock";
clock-frequency = <32768>;
#clock-cells = <0>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x0b000000 0x1000>,
<0x0b002000 0x1000>;
};
gcc: clock-controller@1800000 {
compatible = "qcom,gcc-ipq4019";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x1800000 0x60000>;
};
tlmm: pinctrl@0x01000000 {
compatible = "qcom,ipq4019-pinctrl";
reg = <0x01000000 0x300000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 208 0>;
};
blsp_dma: dma@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x23000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
status = "disabled";
};
spi_0: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x78b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_0: i2c@78b7000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
clock-names = "iface", "core";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
cryptobam: dma@8e04000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x08e04000 0x20000>;
interrupts = <GIC_SPI 207 0>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <1>;
qcom,controlled-remotely;
status = "disabled";
};
crypto@8e3a000 {
compatible = "qcom,crypto-v5.1";
reg = <0x08e3a000 0x6000>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
<&gcc GCC_CRYPTO_AXI_CLK>,
<&gcc GCC_CRYPTO_CLK>;
clock-names = "iface", "bus", "core";
dmas = <&cryptobam 2>, <&cryptobam 3>;
dma-names = "rx", "tx";
status = "disabled";
};
acc0: clock-controller@b088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
};
acc1: clock-controller@b098000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
};
acc2: clock-controller@b0a8000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
};
acc3: clock-controller@b0b8000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
};
saw0: regulator@b089000 {
compatible = "qcom,saw2";
reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
regulator;
};
saw1: regulator@b099000 {
compatible = "qcom,saw2";
reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
regulator;
};
saw2: regulator@b0a9000 {
compatible = "qcom,saw2";
reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
regulator;
};
saw3: regulator@b0b9000 {
compatible = "qcom,saw2";
reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
regulator;
};
serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78af000 0x200>;
interrupts = <0 107 0>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 1>, <&blsp_dma 0>;
dma-names = "rx", "tx";
};
serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78b0000 0x200>;
interrupts = <0 108 0>;
status = "disabled";
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 3>, <&blsp_dma 2>;
dma-names = "rx", "tx";
};
watchdog@b017000 {
compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
reg = <0xb017000 0x40>;
clocks = <&sleep_clk>;
timeout-sec = <10>;
status = "disabled";
};
restart@4ab000 {
compatible = "qcom,pshold";
reg = <0x4ab000 0x4>;
};
};
};