dmaengine: Pass dma_slave_config .device_fc = NULL for all existing users

.device_fc is added in struct dma_slave_config recently. All user drivers, which
want DMA to be the flow controller must pass this field as false. As earlier
driver don't look to use this feature, mark it false for now.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 0d955ff..a09c06b 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -30,6 +30,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/amba/mmci.h>
 #include <linux/pm_runtime.h>
+#include <linux/types.h>
 
 #include <asm/div64.h>
 #include <asm/io.h>
@@ -370,6 +371,7 @@
 		.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
 		.src_maxburst = variant->fifohalfsize >> 2, /* # of words */
 		.dst_maxburst = variant->fifohalfsize >> 2, /* # of words */
+		.device_fc = false,
 	};
 	struct dma_chan *chan;
 	struct dma_device *device;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index f35b6ba..68b69a91 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -33,6 +33,7 @@
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/dmaengine.h>
+#include <linux/types.h>
 
 #include <asm/dma.h>
 #include <asm/irq.h>
@@ -711,6 +712,7 @@
 	config->src_addr_width = 4;
 	config->dst_maxburst = host->burstlen;
 	config->src_maxburst = host->burstlen;
+	config->device_fc = false;
 
 	return dmaengine_slave_config(host->dma, config);
 }
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 8418eb0..04d6c1b 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
+#include <linux/types.h>
 
 #include "spi-dw.h"
 
@@ -136,6 +137,7 @@
 	txconf.dst_maxburst = LNW_DMA_MSIZE_16;
 	txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+	txconf.device_fc = false;
 
 	txchan->device->device_control(txchan, DMA_SLAVE_CONFIG,
 				       (unsigned long) &txconf);
@@ -158,6 +160,7 @@
 	rxconf.src_maxburst = LNW_DMA_MSIZE_16;
 	rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+	rxconf.device_fc = false;
 
 	rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG,
 				       (unsigned long) &rxconf);
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 2f9cb43..1dc667f 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -901,10 +901,12 @@
 	struct dma_slave_config rx_conf = {
 		.src_addr = SSP_DR(pl022->phybase),
 		.direction = DMA_DEV_TO_MEM,
+		.device_fc = false,
 	};
 	struct dma_slave_config tx_conf = {
 		.dst_addr = SSP_DR(pl022->phybase),
 		.direction = DMA_MEM_TO_DEV,
+		.device_fc = false,
 	};
 	unsigned int pages;
 	int ret;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 9ae0240..db7f88a 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -51,6 +51,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 #include <linux/delay.h>
+#include <linux/types.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
@@ -270,6 +271,7 @@
 		.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
 		.direction = DMA_MEM_TO_DEV,
 		.dst_maxburst = uap->fifosize >> 1,
+		.device_fc = false,
 	};
 	struct dma_chan *chan;
 	dma_cap_mask_t mask;
@@ -303,6 +305,7 @@
 			.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
 			.direction = DMA_DEV_TO_MEM,
 			.src_maxburst = uap->fifosize >> 1,
+			.device_fc = false,
 		};
 
 		chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 97cb459..2a36bf3 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -115,6 +115,7 @@
 	slave_conf.dst_addr = usb_fifo_addr;
 	slave_conf.dst_addr_width = addr_width;
 	slave_conf.dst_maxburst = 16;
+	slave_conf.device_fc = false;
 
 	dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG,
 					     (unsigned long) &slave_conf);
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index 1acfd25..52b0ded 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/dmaengine.h>
+#include <linux/types.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
@@ -108,6 +109,8 @@
 		return 0;
 	}
 
+	slave_config.device_fc = false;
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		slave_config.direction = DMA_MEM_TO_DEV;
 		slave_config.dst_addr = dma_params->dma_addr;