diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 3c1eddd..b9b7f30 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -322,7 +322,7 @@
     "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
     or the value stored in the card's EEPROM for cards that have an EEPROM and
     their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
-    be choosen freely from the options enumerated above.
+    be chosen freely from the options enumerated above.
 
     If dma2 is specified and different from dma1, the card will operate in
     full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
@@ -356,7 +356,7 @@
     "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
     or the value stored in the card's EEPROM for cards that have an EEPROM and
     their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
-    be choosen freely from the options enumerated above.
+    be chosen freely from the options enumerated above.
 
     If dma2 is specified and different from dma1, the card will operate in
     full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to