Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 5f8a2fd..34cf982 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -696,7 +696,7 @@
igep2_init_smsc911x();
/*
- * WLAN-BT combo module from MuRata wich has a Marvell WLAN
+ * WLAN-BT combo module from MuRata which has a Marvell WLAN
* (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
*/
igep2_wlan_bt_init();
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index b10db0e..2cf86c3 100644
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -440,7 +440,7 @@
igep3_leds_init();
/*
- * WLAN-BT combo module from MuRata wich has a Marvell WLAN
+ * WLAN-BT combo module from MuRata which has a Marvell WLAN
* (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
*/
igep3_wifi_bt_init();
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index ab87854..6cb6c03 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -258,7 +258,7 @@
* clkdm_init - set up the clockdomain layer
* @clkdms: optional pointer to an array of clockdomains to register
* @init_autodeps: optional pointer to an array of autodeps to register
- * @custom_funcs: func pointers for arch specfic implementations
+ * @custom_funcs: func pointers for arch specific implementations
*
* Set up internal state. If a pointer to an array of clockdomains
* @clkdms was supplied, loop through the list of clockdomains,
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 85b3dce..5823584 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -125,7 +125,7 @@
};
/**
- * struct clkdm_ops - Arch specfic function implementations
+ * struct clkdm_ops - Arch specific function implementations
* @clkdm_add_wkdep: Add a wakeup dependency between clk domains
* @clkdm_del_wkdep: Delete a wakeup dependency between clk domains
* @clkdm_read_wkdep: Read wakeup dependency state between clk domains
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index a44c523..1c240ef 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -297,8 +297,8 @@
/**
* omap3_cpuidle_update_states() - Update the cpuidle states
- * @mpu_deepest_state: Enable states upto and including this for mpu domain
- * @core_deepest_state: Enable states upto and including this for core domain
+ * @mpu_deepest_state: Enable states up to and including this for mpu domain
+ * @core_deepest_state: Enable states up to and including this for core domain
*
* This goes through the list of states available and enables and disables the
* validity of C states based on deepest state that can be achieved for the
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 84d1b73..7b85585 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -253,7 +253,7 @@
ARRAY_SIZE(omap_keyboard_latency), 0);
if (IS_ERR(od)) {
- WARN(1, "Cant build omap_device for %s:%s.\n",
+ WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
return PTR_ERR(od);
}
@@ -373,7 +373,7 @@
od = omap_device_build(name, spi_num, oh, pdata,
sizeof(*pdata), omap_mcspi_latency,
ARRAY_SIZE(omap_mcspi_latency), 0);
- WARN(IS_ERR(od), "Cant build omap_device for %s:%s\n",
+ WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n",
name, oh->name);
kfree(pdata);
return 0;
@@ -725,7 +725,7 @@
od = omap_device_build(dev_name, id, oh, NULL, 0,
omap_wdt_latency,
ARRAY_SIZE(omap_wdt_latency), 0);
- WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n",
+ WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n",
dev_name, oh->name);
return 0;
}
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 34922b2..c9ff0e7 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -262,7 +262,7 @@
omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
kfree(p);
if (IS_ERR(od)) {
- pr_err("%s: Cant build omap_device for %s:%s.\n",
+ pr_err("%s: Can't build omap_device for %s:%s.\n",
__func__, name, oh->name);
return PTR_ERR(od);
}
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 413de18..9529842 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -82,7 +82,7 @@
kfree(pdata);
if (IS_ERR(od)) {
- WARN(1, "Cant build omap_device for %s:%s.\n",
+ WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
return PTR_ERR(od);
}
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 137e1a5..b2f30be 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -465,7 +465,7 @@
od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
if (IS_ERR(od)) {
- WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name);
+ WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
kfree(mmc_data->slots[0].name);
goto done;
}
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 565b906..4a6ef6a 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -149,7 +149,7 @@
ARRAY_SIZE(omap2_mcbsp_latency), false);
kfree(pdata);
if (IS_ERR(od)) {
- pr_err("%s: Cant build omap_device for %s:%s.\n", __func__,
+ pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,
name, oh->name);
return PTR_ERR(od);
}
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index bb043cb..a4ab1e3 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -518,7 +518,7 @@
seq_printf(s, "/* %s */\n", m->muxnames[mode]);
/*
- * XXX: Might be revisited to support differences accross
+ * XXX: Might be revisited to support differences across
* same OMAP generation.
*/
seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def);
diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h
index adbea0d..9fd9314 100644
--- a/arch/arm/mach-omap2/mux2430.h
+++ b/arch/arm/mach-omap2/mux2430.h
@@ -22,7 +22,7 @@
* absolute addresses. The name in the macro is the mode-0 name of
* the pin. NOTE: These registers are 8-bits wide.
*
- * Note that these defines use SDMMC instead of MMC for compability
+ * Note that these defines use SDMMC instead of MMC for compatibility
* with signal names used in 3630.
*/
#define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x000
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index a860fb5..e6e3810 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1559,7 +1559,7 @@
* I2CHS IP's do not follow the usual pattern.
* prcm_reg_id alone cannot be used to program
* the iclk and fclk. Needs to be handled using
- * additonal flags when clk handling is moved
+ * additional flags when clk handling is moved
* to hwmod framework.
*/
.module_offs = CORE_MOD,
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index e2e605f..05f6abc 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -112,12 +112,12 @@
else
/*
* Enable VBUS Valid, AValid and IDDIG
- * high impedence
+ * high impedance
*/
__raw_writel(IDDIG | AVALID | VBUSVALID,
ctrl_base + USBOTGHS_CONTROL);
} else {
- /* Enable session END and IDIG to high impedence. */
+ /* Enable session END and IDIG to high impedance. */
__raw_writel(SESSEND | IDDIG, ctrl_base +
USBOTGHS_CONTROL);
}
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 0a8e74e..07d6140 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -308,7 +308,7 @@
* Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages,
* in those scenarios this bit is to be cleared (enable = false).
*
- * Returns 0 on sucess, error is returned if I2C read/write fails.
+ * Returns 0 on success, error is returned if I2C read/write fails.
*/
int __init omap3_twl_set_sr_bit(bool enable)
{
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 49c6513..9af0847 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -196,7 +196,7 @@
/**
* pwrdm_init - set up the powerdomain layer
* @pwrdm_list: array of struct powerdomain pointers to register
- * @custom_funcs: func pointers for arch specfic implementations
+ * @custom_funcs: func pointers for arch specific implementations
*
* Loop through the array of powerdomains @pwrdm_list, registering all
* that are available on the current CPU. If pwrdm_list is supplied
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 027f40b..d23d979 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -121,7 +121,7 @@
};
/**
- * struct pwrdm_ops - Arch specfic function implementations
+ * struct pwrdm_ops - Arch specific function implementations
* @pwrdm_set_next_pwrst: Set the target power state for a pd
* @pwrdm_read_next_pwrst: Read the target power state set for a pd
* @pwrdm_read_pwrst: Read the current power state of a pd
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 9c9c113..469a920 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -72,7 +72,7 @@
/*
* The USBTLL Save-and-Restore mechanism is broken on
- * 3430s upto ES3.0 and 3630ES1.0. Hence this feature
+ * 3430s up to ES3.0 and 3630ES1.0. Hence this feature
* needs to be disabled on these chips.
* Refer: 3430 errata ID i459 and 3630 errata ID i579
*
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 8f674c9..13e24f9 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -247,7 +247,7 @@
* driver register and sr device intializtion API's. Only one call
* will ultimately succeed.
*
- * Currenly this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrrupt handler for a particular SR
* if smartreflex class driver is already registered and has
* requested for interrupts and the SR interrupt line in present.
*/
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index c6facf7..6fb5209 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -851,7 +851,7 @@
* @voltdm: pointer to the VDD whose voltage is to be reset.
*
* This API finds out the correct voltage the voltage domain is supposed
- * to be at and resets the voltage to that level. Should be used expecially
+ * to be at and resets the voltage to that level. Should be used especially
* while disabling any voltage compensation modules.
*/
void omap_voltage_reset(struct voltagedomain *voltdm)
@@ -912,7 +912,7 @@
* This API searches only through the non-compensated voltages int the
* voltage table.
* Returns pointer to the voltage table entry corresponding to volt on
- * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage
+ * success. Returns -ENODATA if no voltage table exisits for the passed voltage
* domain or if there is no matching entry.
*/
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,