Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index b6eec8c..7ca51ce 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -119,13 +119,13 @@
/*
* Bit assignments
*/
-/* DMA_Ctl bit asign ------------------------------------------------------- */
+/* DMA_Ctl bit assign ------------------------------------------------------- */
#define DMA_RxAlign 0x00c00000 /* 1:Reception Alignment */
#define DMA_RxAlign_1 0x00400000
#define DMA_RxAlign_2 0x00800000
#define DMA_RxAlign_3 0x00c00000
#define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */
-#define DMA_IntMask 0x00040000 /* 1:Interupt mask */
+#define DMA_IntMask 0x00040000 /* 1:Interrupt mask */
#define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */
#define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */
#define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */
@@ -134,11 +134,11 @@
#define DMA_PowrMgmnt 0x00001000 /* 1:Power Management */
#define DMA_DmBurst_Mask 0x000001fc /* DMA Burst size */
-/* RxFragSize bit asign ---------------------------------------------------- */
+/* RxFragSize bit assign ---------------------------------------------------- */
#define RxFrag_EnPack 0x00008000 /* 1:Enable Packing */
#define RxFrag_MinFragMask 0x00000ffc /* Minimum Fragment */
-/* MAC_Ctl bit asign ------------------------------------------------------- */
+/* MAC_Ctl bit assign ------------------------------------------------------- */
#define MAC_Link10 0x00008000 /* 1:Link Status 10Mbits */
#define MAC_EnMissRoll 0x00002000 /* 1:Enable Missed Roll */
#define MAC_MissRoll 0x00000400 /* 1:Missed Roll */
@@ -152,7 +152,7 @@
#define MAC_HaltImm 0x00000002 /* 1:Halt Immediate */
#define MAC_HaltReq 0x00000001 /* 1:Halt request */
-/* PROM_Ctl bit asign ------------------------------------------------------ */
+/* PROM_Ctl bit assign ------------------------------------------------------ */
#define PROM_Busy 0x00008000 /* 1:Busy (Start Operation) */
#define PROM_Read 0x00004000 /*10:Read operation */
#define PROM_Write 0x00002000 /*01:Write operation */
@@ -162,7 +162,7 @@
#define PROM_Addr_Ena 0x00000030 /*11xxxx:PROM Write enable */
/*00xxxx: disable */
-/* CAM_Ctl bit asign ------------------------------------------------------- */
+/* CAM_Ctl bit assign ------------------------------------------------------- */
#define CAM_CompEn 0x00000010 /* 1:CAM Compare Enable */
#define CAM_NegCAM 0x00000008 /* 1:Reject packets CAM recognizes,*/
/* accept other */
@@ -170,7 +170,7 @@
#define CAM_GroupAcc 0x00000002 /* 1:Multicast assept */
#define CAM_StationAcc 0x00000001 /* 1:unicast accept */
-/* CAM_Ena bit asign ------------------------------------------------------- */
+/* CAM_Ena bit assign ------------------------------------------------------- */
#define CAM_ENTRY_MAX 21 /* CAM Data entry max count */
#define CAM_Ena_Mask ((1<<CAM_ENTRY_MAX)-1) /* CAM Enable bits (Max 21bits) */
#define CAM_Ena_Bit(index) (1 << (index))
@@ -178,7 +178,7 @@
#define CAM_ENTRY_SOURCE 1
#define CAM_ENTRY_MACCTL 20
-/* Tx_Ctl bit asign -------------------------------------------------------- */
+/* Tx_Ctl bit assign -------------------------------------------------------- */
#define Tx_En 0x00000001 /* 1:Transmit enable */
#define Tx_TxHalt 0x00000002 /* 1:Transmit Halt Request */
#define Tx_NoPad 0x00000004 /* 1:Suppress Padding */
@@ -192,7 +192,7 @@
#define Tx_EnTxPar 0x00002000 /* 1:Enable Transmit Parity */
#define Tx_EnComp 0x00004000 /* 1:Enable Completion */
-/* Tx_Stat bit asign ------------------------------------------------------- */
+/* Tx_Stat bit assign ------------------------------------------------------- */
#define Tx_TxColl_MASK 0x0000000F /* Tx Collision Count */
#define Tx_ExColl 0x00000010 /* Excessive Collision */
#define Tx_TXDefer 0x00000020 /* Transmit Defered */
@@ -208,7 +208,7 @@
#define Tx_Halted 0x00008000 /* Tx Halted */
#define Tx_SQErr 0x00010000 /* Signal Quality Error(SQE) */
-/* Rx_Ctl bit asign -------------------------------------------------------- */
+/* Rx_Ctl bit assign -------------------------------------------------------- */
#define Rx_EnGood 0x00004000 /* 1:Enable Good */
#define Rx_EnRxPar 0x00002000 /* 1:Enable Receive Parity */
#define Rx_EnLongErr 0x00000800 /* 1:Enable Long Error */
@@ -222,7 +222,7 @@
#define Rx_RxHalt 0x00000002 /* 1:Receive Halt Request */
#define Rx_RxEn 0x00000001 /* 1:Receive Intrrupt Enable */
-/* Rx_Stat bit asign ------------------------------------------------------- */
+/* Rx_Stat bit assign ------------------------------------------------------- */
#define Rx_Halted 0x00008000 /* Rx Halted */
#define Rx_Good 0x00004000 /* Rx Good */
#define Rx_RxPar 0x00002000 /* Rx Parity Error */
@@ -238,7 +238,7 @@
#define Rx_Stat_Mask 0x0000FFF0 /* Rx All Status Mask */
-/* Int_En bit asign -------------------------------------------------------- */
+/* Int_En bit assign -------------------------------------------------------- */
#define Int_NRAbtEn 0x00000800 /* 1:Non-recoverable Abort Enable */
#define Int_TxCtlCmpEn 0x00000400 /* 1:Transmit Ctl Complete Enable */
#define Int_DmParErrEn 0x00000200 /* 1:DMA Parity Error Enable */
@@ -253,7 +253,7 @@
#define Int_FDAExEn 0x00000001 /* 1:Free Descriptor Area */
/* Exhausted Enable */
-/* Int_Src bit asign ------------------------------------------------------- */
+/* Int_Src bit assign ------------------------------------------------------- */
#define Int_NRabt 0x00004000 /* 1:Non Recoverable error */
#define Int_DmParErrStat 0x00002000 /* 1:DMA Parity Error & Clear */
#define Int_BLEx 0x00001000 /* 1:Buffer List Empty & Clear */
@@ -270,8 +270,8 @@
#define Int_IntMacRx 0x00000002 /* 1:Rx controller & Clear */
#define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */
-/* MD_CA bit asign --------------------------------------------------------- */
-#define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */
+/* MD_CA bit assign --------------------------------------------------------- */
+#define MD_CA_PreSup 0x00001000 /* 1:Preamble Suppress */
#define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */
#define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */
@@ -296,7 +296,7 @@
#define FD_ALIGN 16
-/* Frame Descripter bit asign ---------------------------------------------- */
+/* Frame Descripter bit assign ---------------------------------------------- */
#define FD_FDLength_MASK 0x0000FFFF /* Length MASK */
#define FD_BDCnt_MASK 0x001F0000 /* BD count MASK in FD */
#define FD_FrmOpt_MASK 0x7C000000 /* Frame option MASK */
@@ -309,8 +309,8 @@
#define FD_Next_EOL 0x00000001 /* FD EOL indicator */
#define FD_BDCnt_SHIFT 16
-/* Buffer Descripter bit asign --------------------------------------------- */
-#define BD_BuffLength_MASK 0x0000FFFF /* Recieve Data Size */
+/* Buffer Descripter bit assign --------------------------------------------- */
+#define BD_BuffLength_MASK 0x0000FFFF /* Receive Data Size */
#define BD_RxBDID_MASK 0x00FF0000 /* BD ID Number MASK */
#define BD_RxBDSeqN_MASK 0x7F000000 /* Rx BD Sequence Number */
#define BD_CownsBD 0x80000000 /* BD Controller owner bit */
@@ -339,7 +339,7 @@
#define TX_THRESHOLD 1024
/* used threshold with packet max byte for low pci transfer ability.*/
#define TX_THRESHOLD_MAX 1536
-/* setting threshold max value when overrun error occured this count. */
+/* setting threshold max value when overrun error occurred this count. */
#define TX_THRESHOLD_KEEP_LIMIT 10
/* 16 + RX_BUF_NUM * 8 + RX_FD_NUM * 16 + TX_FD_NUM * 32 <= PAGE_SIZE*FD_PAGE_NUM */