Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h
index 95ee503..9b05942 100644
--- a/drivers/scsi/aic7xxx/aic79xx.h
+++ b/drivers/scsi/aic7xxx/aic79xx.h
@@ -473,7 +473,7 @@
* o A residual has occurred if SG_FULL_RESID is set in sgptr,
* or residual_sgptr does not have SG_LIST_NULL set.
*
- * o We are transfering the last segment if residual_datacnt has
+ * o We are transferring the last segment if residual_datacnt has
* the SG_LAST_SEG flag set.
*
* Host:
@@ -516,7 +516,7 @@
*/
/*
- * Definition of a scatter/gather element as transfered to the controller.
+ * Definition of a scatter/gather element as transferred to the controller.
* The aic7xxx chips only support a 24bit length. We use the top byte of
* the length to store additional address bits and a flag to indicate
* that a given segment terminates the transfer. This gives us an
diff --git a/drivers/scsi/aic7xxx/aic79xx.reg b/drivers/scsi/aic7xxx/aic79xx.reg
index 0666c22..7e12c31 100644
--- a/drivers/scsi/aic7xxx/aic79xx.reg
+++ b/drivers/scsi/aic7xxx/aic79xx.reg
@@ -305,7 +305,7 @@
}
/*
- * Sequencer Interupt Status
+ * Sequencer Interrupt Status
*/
register SEQINTSTAT {
address 0x00C
@@ -685,7 +685,7 @@
}
/*
- * CMC Recieve Message 0
+ * CMC Receive Message 0
*/
register CMCRXMSG0 {
address 0x090
@@ -696,7 +696,7 @@
}
/*
- * Overlay Recieve Message 0
+ * Overlay Receive Message 0
*/
register OVLYRXMSG0 {
address 0x090
@@ -732,7 +732,7 @@
}
/*
- * CMC Recieve Message 1
+ * CMC Receive Message 1
*/
register CMCRXMSG1 {
address 0x091
@@ -742,7 +742,7 @@
}
/*
- * Overlay Recieve Message 1
+ * Overlay Receive Message 1
*/
register OVLYRXMSG1 {
address 0x091
@@ -777,7 +777,7 @@
}
/*
- * CMC Recieve Message 2
+ * CMC Receive Message 2
*/
register CMCRXMSG2 {
address 0x092
@@ -787,7 +787,7 @@
}
/*
- * Overlay Recieve Message 2
+ * Overlay Receive Message 2
*/
register OVLYRXMSG2 {
address 0x092
@@ -816,7 +816,7 @@
}
/*
- * CMC Recieve Message 3
+ * CMC Receive Message 3
*/
register CMCRXMSG3 {
address 0x093
@@ -826,7 +826,7 @@
}
/*
- * Overlay Recieve Message 3
+ * Overlay Receive Message 3
*/
register OVLYRXMSG3 {
address 0x093
@@ -1249,7 +1249,7 @@
/*
* LQ Packet In
- * The last LQ Packet recieved
+ * The last LQ Packet received
*/
register LQIN {
address 0x020
@@ -2573,7 +2573,7 @@
}
/*
- * Shaddow Host Address.
+ * Shadow Host Address.
*/
register SHADDR {
address 0x060
@@ -3983,7 +3983,7 @@
/*
* The maximum amount of time to wait, when interrupt coalescing
- * is enabled, before issueing a CMDCMPLT interrupt for a completed
+ * is enabled, before issuing a CMDCMPLT interrupt for a completed
* command.
*/
INT_COALESCING_TIMER {
diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq
index 2fb78e3..3a36d93 100644
--- a/drivers/scsi/aic7xxx/aic79xx.seq
+++ b/drivers/scsi/aic7xxx/aic79xx.seq
@@ -567,7 +567,7 @@
shr SELOID, 4, SCB_SCSIID;
/*
* If we want to send a message to the device, ensure
- * we are selecting with atn irregardless of our packetized
+ * we are selecting with atn regardless of our packetized
* agreement. Since SPI4 only allows target reset or PPR
* messages if this is a packetized connection, the change
* to our negotiation table entry for this selection will
@@ -960,7 +960,7 @@
* This is done to allow the host to send messages outside of an identify
* sequence while protecting the seqencer from testing the MK_MESSAGE bit
* on an SCB that might not be for the current nexus. (For example, a
- * BDR message in responce to a bad reselection would leave us pointed to
+ * BDR message in response to a bad reselection would leave us pointed to
* an SCB that doesn't have anything to do with the current target).
*
* Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag,
@@ -1507,7 +1507,7 @@
* If the other FIFO needs loading, then it
* must not have claimed the S/G cache yet
* (SG_CACHE_AVAIL would have been cleared in
- * the orginal FIFO mode and we test this above).
+ * the original FIFO mode and we test this above).
* Return to the idle loop so we can process the
* FIFO not currently on the bus first.
*/
@@ -1521,7 +1521,7 @@
idle_sgfetch_start:
/*
* We fetch a "cacheline aligned" and sized amount of data
- * so we don't end up referencing a non-existant page.
+ * so we don't end up referencing a non-existent page.
* Cacheline aligned is in quotes because the kernel will
* set the prefetch amount to a reasonable level if the
* cacheline size is unknown.
@@ -1551,7 +1551,7 @@
test DFSTATUS, PRELOAD_AVAIL jz return;
/*
* On the A, preloading a segment before HDMAENACK
- * comes true can clobber the shaddow address of the
+ * comes true can clobber the shadow address of the
* first segment in the S/G FIFO. Wait until it is
* safe to proceed.
*/
@@ -2004,10 +2004,10 @@
* Defer handling of this NONPACKREQ until we
* can be sure it pertains to this FIFO. SAVEPTRS
* will not be asserted if the NONPACKREQ is for us,
- * so we must simulate it if shaddow is valid. If
- * shaddow is not valid, keep running this FIFO until we
+ * so we must simulate it if shadow is valid. If
+ * shadow is not valid, keep running this FIFO until we
* have satisfied the transfer by loading segments and
- * waiting for either shaddow valid or last_seg_done.
+ * waiting for either shadow valid or last_seg_done.
*/
test MDFFSTAT, SHVALID jnz pkt_saveptrs;
pkt_service_fifo:
@@ -2171,7 +2171,7 @@
/*
* The unexpected nonpkt phase handler assumes that any
* data channel use will have a FIFO reference count. It
- * turns out that the status handler doesn't need a refernce
+ * turns out that the status handler doesn't need a references
* count since the status received flag, and thus completion
* processing, cannot be set until the handler is finished.
* We increment the count here to make the nonpkt handler
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 3233bf5..5f8617d 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -562,7 +562,7 @@
}
#endif
-/*********************** Miscelaneous Support Functions ***********************/
+/*********************** Miscellaneous Support Functions ***********************/
/*
* Return pointers to the transfer negotiation information
* for the specified our_id/remote_id pair.
@@ -599,7 +599,7 @@
ahd_outw(struct ahd_softc *ahd, u_int port, u_int value)
{
/*
- * Write low byte first to accomodate registers
+ * Write low byte first to accommodate registers
* such as PRGMCNT where the order maters.
*/
ahd_outb(ahd, port, value & 0xFF);
@@ -2067,7 +2067,7 @@
* that requires host assistance for completion.
* While handling the message phase(s), we will be
* notified by the sequencer after each byte is
- * transfered so we can track bus phase changes.
+ * transferred so we can track bus phase changes.
*
* If this is the first time we've seen a HOST_MSG_LOOP
* interrupt, initialize the state of the host message
@@ -2487,7 +2487,7 @@
/*
* Although the driver does not care about the
* 'Selection in Progress' status bit, the busy
- * LED does. SELINGO is only cleared by a successfull
+ * LED does. SELINGO is only cleared by a successful
* selection, so we must manually clear it to insure
* the LED turns off just incase no future successful
* selections occur (e.g. no devices on the bus).
@@ -3548,7 +3548,7 @@
ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP);
ahd_outb(ahd, SIMODE1, simode1);
/*
- * SCSIINT seems to glitch occassionally when
+ * SCSIINT seems to glitch occasionally when
* the interrupt masks are restored. Clear SCSIINT
* one more time so that only persistent errors
* are seen as a real interrupt.
@@ -3838,7 +3838,7 @@
/*
* Update the bitmask of targets for which the controller should
- * negotiate with at the next convenient oportunity. This currently
+ * negotiate with at the next convenient opportunity. This currently
* means the next time we send the initial identify messages for
* a new transaction.
*/
@@ -4200,7 +4200,7 @@
/*
* During packetized transfers, the target will
- * give us the oportunity to send command packets
+ * give us the opportunity to send command packets
* without us asserting attention.
*/
if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
@@ -5651,7 +5651,7 @@
/*
* Requeue all tagged commands for this target
- * currently in our posession so they can be
+ * currently in our possession so they can be
* converted to untagged commands.
*/
ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
@@ -6245,7 +6245,7 @@
/*
* Reset the controller and record some information about it
* that is only available just after a reset. If "reinit" is
- * non-zero, this reset occured after initial configuration
+ * non-zero, this reset occurred after initial configuration
* and the caller requests that the chip be fully reinitialized
* to a runable state. Chip interrupts are *not* enabled after
* a reinitialization. The caller must enable interrupts via
@@ -6495,7 +6495,7 @@
}
/*
- * Note that we were successfull
+ * Note that we were successful
*/
return (0);
@@ -7079,7 +7079,7 @@
return (ENOMEM);
/*
- * Verify that the compiler hasn't over-agressively
+ * Verify that the compiler hasn't over-aggressively
* padded important structures.
*/
if (sizeof(struct hardware_scb) != 64)
@@ -10087,7 +10087,7 @@
return (error);
/*
- * Write the data. If we don't get throught the loop at
+ * Write the data. If we don't get through the loop at
* least once, the arguments were invalid.
*/
retval = EINVAL;
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 25d0666..7d48700 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -1441,7 +1441,7 @@
usertags = ahd_linux_user_tagdepth(ahd, devinfo);
if (!was_queuing) {
/*
- * Start out agressively and allow our
+ * Start out aggressively and allow our
* dynamic queue depth algorithm to take
* care of the rest.
*/
diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h
index 17444bc..f695774 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.h
+++ b/drivers/scsi/aic7xxx/aic7xxx.h
@@ -440,7 +440,7 @@
* o A residual has occurred if SG_FULL_RESID is set in sgptr,
* or residual_sgptr does not have SG_LIST_NULL set.
*
- * o We are transfering the last segment if residual_datacnt has
+ * o We are transferring the last segment if residual_datacnt has
* the SG_LAST_SEG flag set.
*
* Host:
@@ -494,7 +494,7 @@
*/
/*
- * Definition of a scatter/gather element as transfered to the controller.
+ * Definition of a scatter/gather element as transferred to the controller.
* The aic7xxx chips only support a 24bit length. We use the top byte of
* the length to store additional address bits and a flag to indicate
* that a given segment terminates the transfer. This gives us an
diff --git a/drivers/scsi/aic7xxx/aic7xxx.reg b/drivers/scsi/aic7xxx/aic7xxx.reg
index 9a96e55..ba0b411 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.reg
+++ b/drivers/scsi/aic7xxx/aic7xxx.reg
@@ -351,7 +351,7 @@
address 0x00d
access_mode RO
field OVERRUN 0x80
- field SHVALID 0x40 /* Shaddow Layer non-zero */
+ field SHVALID 0x40 /* Shadow Layer non-zero */
field EXP_ACTIVE 0x10 /* SCSI Expander Active */
field CRCVALERR 0x08 /* CRC doesn't match (U3 only) */
field CRCENDERR 0x04 /* No terminal CRC packet (U3 only) */
diff --git a/drivers/scsi/aic7xxx/aic7xxx.seq b/drivers/scsi/aic7xxx/aic7xxx.seq
index 5a4cfc95..e60041e 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx/aic7xxx.seq
@@ -57,10 +57,10 @@
* a later time. This problem cannot be resolved by holding a single entry
* in scratch ram since a reconnecting target can request sense and this will
* create yet another SCB waiting for selection. The solution used here is to
- * use byte 27 of the SCB as a psuedo-next pointer and to thread a list
+ * use byte 27 of the SCB as a pseudo-next pointer and to thread a list
* of SCBs that are awaiting selection. Since 0-0xfe are valid SCB indexes,
* SCB_LIST_NULL is 0xff which is out of range. An entry is also added to
- * this list everytime a request sense occurs or after completing a non-tagged
+ * this list every time a request sense occurs or after completing a non-tagged
* command for which a second SCB has been queued. The sequencer will
* automatically consume the entries.
*/
@@ -752,7 +752,7 @@
/*
* We fetch a "cacheline aligned" and sized amount of data
- * so we don't end up referencing a non-existant page.
+ * so we don't end up referencing a non-existent page.
* Cacheline aligned is in quotes because the kernel will
* set the prefetch amount to a reasonable level if the
* cacheline size is unknown.
@@ -1485,7 +1485,7 @@
* This is done to allow the host to send messages outside of an identify
* sequence while protecting the seqencer from testing the MK_MESSAGE bit
* on an SCB that might not be for the current nexus. (For example, a
- * BDR message in responce to a bad reselection would leave us pointed to
+ * BDR message in response to a bad reselection would leave us pointed to
* an SCB that doesn't have anything to do with the current target).
*
* Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag,
@@ -1999,7 +1999,7 @@
* from out to in, wait an additional data release delay before continuing.
*/
change_phase:
- /* Wait for preceeding I/O session to complete. */
+ /* Wait for preceding I/O session to complete. */
test SCSISIGI, ACKI jnz .;
/* Change the phase */
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index e021b48..dc28b0a 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -427,7 +427,7 @@
}
#endif
-/*********************** Miscelaneous Support Functions ***********************/
+/*********************** Miscellaneous Support Functions ***********************/
/*
* Determine whether the sequencer reported a residual
* for this SCB/transaction.
@@ -1243,7 +1243,7 @@
* that requires host assistance for completion.
* While handling the message phase(s), we will be
* notified by the sequencer after each byte is
- * transfered so we can track bus phase changes.
+ * transferred so we can track bus phase changes.
*
* If this is the first time we've seen a HOST_MSG_LOOP
* interrupt, initialize the state of the host message
@@ -1487,7 +1487,7 @@
scbptr, ahc_inb(ahc, ARG_1),
ahc->scb_data->hscbs[scbptr].tag);
ahc_dump_card_state(ahc);
- panic("for saftey");
+ panic("for safety");
break;
}
case OUT_OF_RANGE:
@@ -1733,7 +1733,7 @@
/*
* Although the driver does not care about the
* 'Selection in Progress' status bit, the busy
- * LED does. SELINGO is only cleared by a successfull
+ * LED does. SELINGO is only cleared by a successful
* selection, so we must manually clear it to insure
* the LED turns off just incase no future successful
* selections occur (e.g. no devices on the bus).
@@ -1943,7 +1943,7 @@
if (lastphase != P_BUSFREE) {
/*
* Renegotiate with this device at the
- * next oportunity just in case this busfree
+ * next opportunity just in case this busfree
* is due to a negotiation mismatch with the
* device.
*/
@@ -2442,7 +2442,7 @@
/*
* Update the bitmask of targets for which the controller should
- * negotiate with at the next convenient oportunity. This currently
+ * negotiate with at the next convenient opportunity. This currently
* means the next time we send the initial identify messages for
* a new transaction.
*/
@@ -4131,7 +4131,7 @@
/*
* Requeue all tagged commands for this target
- * currently in our posession so they can be
+ * currently in our possession so they can be
* converted to untagged commands.
*/
ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb),
@@ -4581,7 +4581,7 @@
/*
* Reset the controller and record some information about it
* that is only available just after a reset. If "reinit" is
- * non-zero, this reset occured after initial configuration
+ * non-zero, this reset occurred after initial configuration
* and the caller requests that the chip be fully reinitialized
* to a runable state. Chip interrupts are *not* enabled after
* a reinitialization. The caller must enable interrupts via
@@ -4899,7 +4899,7 @@
ahc->next_queued_scb = ahc_get_scb(ahc);
/*
- * Note that we were successfull
+ * Note that we were successful
*/
return (0);
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 4a359bb..c6251bb 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -294,7 +294,7 @@
* dubious at best. To my knowledge, this option has never actually
* solved a PCI parity problem, but on certain machines with broken PCI
* chipset configurations where stray PCI transactions with bad parity are
- * the norm rather than the exception, the error messages can be overwelming.
+ * the norm rather than the exception, the error messages can be overwhelming.
* It's included in the driver for completeness.
* 0 = Shut off PCI parity check
* non-0 = reverse polarity pci parity checking
@@ -1318,7 +1318,7 @@
usertags = ahc_linux_user_tagdepth(ahc, devinfo);
if (!was_queuing) {
/*
- * Start out agressively and allow our
+ * Start out aggressively and allow our
* dynamic queue depth algorithm to take
* care of the rest.
*/
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c
index 2b11a42..6917b4f 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c
@@ -789,7 +789,7 @@
ahc->bus_intr = ahc_pci_intr;
ahc->bus_chip_init = ahc_pci_chip_init;
- /* Remeber how the card was setup in case there is no SEEPROM */
+ /* Remember how the card was setup in case there is no SEEPROM */
if ((ahc_inb(ahc, HCNTRL) & POWRDN) == 0) {
ahc_pause(ahc);
if ((ahc->features & AHC_ULTRA2) != 0)
@@ -860,7 +860,7 @@
}
/*
- * We cannot perform ULTRA speeds without the presense
+ * We cannot perform ULTRA speeds without the presence
* of the external precision resistor.
*/
if ((ahc->features & AHC_ULTRA) != 0) {
@@ -969,7 +969,7 @@
}
/*
- * Test for the presense of external sram in an
+ * Test for the presence of external sram in an
* "unshared" configuration.
*/
static int
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
index e406443..f1586a4 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
@@ -803,7 +803,7 @@
| macro_arglist ',' T_ARG
{
if ($1 == 0) {
- stop("Comma without preceeding argument in arg list",
+ stop("Comma without preceding argument in arg list",
EX_DATAERR);
/* NOTREACHED */
}
@@ -1319,8 +1319,8 @@
;
/*
- * This grammer differs from the one in the aic7xxx
- * reference manual since the grammer listed there is
+ * This grammar differs from the one in the aic7xxx
+ * reference manual since the grammar listed there is
* ambiguous and causes a shift/reduce conflict.
* It also seems more logical as the "immediate"
* argument is listed as the second arg like the
@@ -1799,7 +1799,7 @@
instr = seq_alloc();
f3_instr = &instr->format.format3;
if (address->symbol == NULL) {
- /* 'dot' referrence. Use the current instruction pointer */
+ /* 'dot' reference. Use the current instruction pointer */
addr = instruction_ptr + address->offset;
} else if (address->symbol->type == UNINITIALIZED) {
/* forward reference */
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y
index ff46aa6..708326d 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y
@@ -115,7 +115,7 @@
| macro_arglist ',' T_ARG
{
if ($1 == 0) {
- stop("Comma without preceeding argument in arg list",
+ stop("Comma without preceding argument in arg list",
EX_DATAERR);
/* NOTREACHED */
}