Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 97b970e..1c67139 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -547,7 +547,7 @@
*
* ext4_should_retry_alloc() is called when ENOSPC is returned, and if
* it is profitable to retry the operation, this function will wait
- * for the current or commiting transaction to complete, and then
+ * for the current or committing transaction to complete, and then
* return TRUE.
*
* if the total number of retries exceed three times, return FALSE.
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index dd2cb50..4890d6f 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1729,7 +1729,7 @@
BUG_ON(npath->p_depth != path->p_depth);
eh = npath[depth].p_hdr;
if (le16_to_cpu(eh->eh_entries) < le16_to_cpu(eh->eh_max)) {
- ext_debug("next leaf isnt full(%d)\n",
+ ext_debug("next leaf isn't full(%d)\n",
le16_to_cpu(eh->eh_entries));
path = npath;
goto repeat;
@@ -2533,7 +2533,7 @@
/*
* This function is called by ext4_ext_map_blocks() if someone tries to write
* to an uninitialized extent. It may result in splitting the uninitialized
- * extent into multiple extents (upto three - one initialized and two
+ * extent into multiple extents (up to three - one initialized and two
* uninitialized).
* There are three possibilities:
* a> There is no split required: Entire extent should be initialized
@@ -3174,7 +3174,7 @@
path, flags);
/*
* Flag the inode(non aio case) or end_io struct (aio case)
- * that this IO needs to convertion to written when IO is
+ * that this IO needs to conversion to written when IO is
* completed
*/
if (io && !(io->flag & EXT4_IO_END_UNWRITTEN)) {
@@ -3460,10 +3460,10 @@
ext4_ext_mark_uninitialized(&newex);
/*
* io_end structure was created for every IO write to an
- * uninitialized extent. To avoid unecessary conversion,
+ * uninitialized extent. To avoid unnecessary conversion,
* here we flag the IO that really needs the conversion.
* For non asycn direct IO case, flag the inode state
- * that we need to perform convertion when IO is done.
+ * that we need to perform conversion when IO is done.
*/
if ((flags & EXT4_GET_BLOCKS_PRE_IO)) {
if (io && !(io->flag & EXT4_IO_END_UNWRITTEN)) {
diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
index 7f74019..4673bc0 100644
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -101,7 +101,7 @@
* to the work-to-be schedule is freed.
*
* Thus we need to keep the io structure still valid here after
- * convertion finished. The io structure has a flag to
+ * conversion finished. The io structure has a flag to
* avoid double converting from both fsync and background work
* queue work.
*/
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 1a86282..ad8e303 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2588,7 +2588,7 @@
* because we should have holes filled from ext4_page_mkwrite(). We even don't
* need to file the inode to the transaction's list in ordered mode because if
* we are writing back data added by write(), the inode is already there and if
- * we are writing back data modified via mmap(), noone guarantees in which
+ * we are writing back data modified via mmap(), no one guarantees in which
* transaction the data will hit the disk. In case we are journaling data, we
* cannot start transaction directly because transaction start ranks above page
* lock so we have to do some magic.
@@ -2690,7 +2690,7 @@
/*
* This is called via ext4_da_writepages() to
- * calulate the total number of credits to reserve to fit
+ * calculate the total number of credits to reserve to fit
* a single extent allocation into a single transaction,
* ext4_da_writpeages() will loop calling this before
* the block allocation.
@@ -3304,7 +3304,7 @@
* the pages by calling redirty_page_for_writepage() but that
* would be ugly in the extreme. So instead we would need to
* replicate parts of the code in the above functions,
- * simplifying them becuase we wouldn't actually intend to
+ * simplifying them because we wouldn't actually intend to
* write out the pages, but rather only collect contiguous
* logical block extents, call the multi-block allocator, and
* then update the buffer heads with the block allocations.
@@ -3694,7 +3694,7 @@
*
* The unwrritten extents will be converted to written when DIO is completed.
* For async direct IO, since the IO may still pending when return, we
- * set up an end_io call back function, which will do the convertion
+ * set up an end_io call back function, which will do the conversion
* when async direct IO completed.
*
* If the O_DIRECT write will extend the file then add this inode to the
@@ -3717,7 +3717,7 @@
* We could direct write to holes and fallocate.
*
* Allocated blocks to fill the hole are marked as uninitialized
- * to prevent paralel buffered read to expose the stale data
+ * to prevent parallel buffered read to expose the stale data
* before DIO complete the data IO.
*
* As to previously fallocated extents, ext4 get_block
@@ -3778,7 +3778,7 @@
int err;
/*
* for non AIO case, since the IO is already
- * completed, we could do the convertion right here
+ * completed, we could do the conversion right here
*/
err = ext4_convert_unwritten_extents(inode,
offset, ret);
@@ -4025,7 +4025,7 @@
*
* When we do truncate() we may have to clean the ends of several
* indirect blocks but leave the blocks themselves alive. Block is
- * partially truncated if some data below the new i_size is refered
+ * partially truncated if some data below the new i_size is referred
* from it (and it is on the path to the first completely truncated
* data block, indeed). We have to free the top of that path along
* with everything to the right of the path. Since no allocation
@@ -4169,7 +4169,7 @@
* @first: array of block numbers
* @last: points immediately past the end of array
*
- * We are freeing all blocks refered from that array (numbers are stored as
+ * We are freeing all blocks referred from that array (numbers are stored as
* little-endian 32-bit) and updating @inode->i_blocks appropriately.
*
* We accumulate contiguous runs of blocks to free. Conveniently, if these
@@ -4261,7 +4261,7 @@
* @last: pointer immediately past the end of array
* @depth: depth of the branches to free
*
- * We are freeing all blocks refered from these branches (numbers are
+ * We are freeing all blocks referred from these branches (numbers are
* stored as little-endian 32-bit) and updating @inode->i_blocks
* appropriately.
*/
@@ -5478,7 +5478,7 @@
}
/*
- * Calulate the total number of credits to reserve to fit
+ * Calculate the total number of credits to reserve to fit
* the modification of a single pages into a single transaction,
* which may include multiple chunks of block allocations.
*
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index a5837a8..d8a16ee 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -92,7 +92,7 @@
* between CPUs. It is possible to get scheduled at this point.
*
* The locality group prealloc space is used looking at whether we have
- * enough free space (pa_free) withing the prealloc space.
+ * enough free space (pa_free) within the prealloc space.
*
* If we can't allocate blocks via inode prealloc or/and locality group
* prealloc then we look at the buddy cache. The buddy cache is represented
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index d1bafa5..92816b4 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -517,7 +517,7 @@
* start with one credit accounted for
* superblock modification.
*
- * For the tmp_inode we already have commited the
+ * For the tmp_inode we already have committed the
* trascation that created the inode. Later as and
* when we add extents we extent the journal
*/
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 22546ad..056474b 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -617,7 +617,7 @@
* filesystem will have already been marked read/only and the
* journal has been aborted. We return 1 as a hint to callers
* who might what to use the return value from
- * ext4_grp_locked_error() to distinguish beween the
+ * ext4_grp_locked_error() to distinguish between the
* ERRORS_CONT and ERRORS_RO case, and perhaps return more
* aggressively from the ext4 function in question, with a
* more appropriate error code.
@@ -4624,7 +4624,7 @@
/* Read data from quotafile - avoid pagecache and such because we cannot afford
* acquiring the locks... As quota files are never truncated and quota code
- * itself serializes the operations (and noone else should touch the files)
+ * itself serializes the operations (and no one else should touch the files)
* we don't have to be afraid of races */
static ssize_t ext4_quota_read(struct super_block *sb, int type, char *data,
size_t len, loff_t off)