[ALSA] usb-audio: sort quirks list
Move some entries to their proper position so that the list is again
sorted by vendor/product ID.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index 938dff5..82a8d14 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -39,6 +39,30 @@
.idProduct = prod, \
.bInterfaceClass = USB_CLASS_VENDOR_SPEC
+/* Creative/E-Mu devices */
+{
+ USB_DEVICE(0x041e, 0x3010),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ .vendor_name = "Creative Labs",
+ .product_name = "Sound Blaster MP3+",
+ .ifnum = QUIRK_NO_INTERFACE
+ }
+},
+{
+ /* E-Mu 0202 USB */
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x041e,
+ .idProduct = 0x3f02,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+},
+{
+ /* E-Mu 0404 USB */
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x041e,
+ .idProduct = 0x3f04,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+},
+
/*
* Logitech QuickCam: bDeviceClass is vendor-specific, so generic interface
* class matches do not take effect without an explicit ID match.
@@ -97,19 +121,7 @@
.bInterfaceClass = USB_CLASS_AUDIO,
.bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
},
-/* E-Mu devices */
-{
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = 0x041e,
- .idProduct = 0x3f02,
- .bInterfaceClass = USB_CLASS_AUDIO,
-},
-{
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = 0x041e,
- .idProduct = 0x3f04,
- .bInterfaceClass = USB_CLASS_AUDIO,
-},
+
/*
* Yamaha devices
*/
@@ -1165,19 +1177,6 @@
}
}
},
-{
- USB_DEVICE(0x582, 0x00a6),
- .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
- .vendor_name = "Roland",
- .product_name = "Juno-G",
- .ifnum = 0,
- .type = QUIRK_MIDI_FIXED_ENDPOINT,
- .data = & (const struct snd_usb_midi_endpoint_info) {
- .out_cables = 0x0001,
- .in_cables = 0x0001
- }
- }
-},
{ /*
* This quirk is for the "Advanced" modes of the Edirol UA-25.
* If the switch is not in an advanced setting, the UA-25 has
@@ -1336,6 +1335,19 @@
},
/* TODO: add Edirol MD-P1 support */
{
+ USB_DEVICE(0x582, 0x00a6),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ .vendor_name = "Roland",
+ .product_name = "Juno-G",
+ .ifnum = 0,
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = & (const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0001,
+ .in_cables = 0x0001
+ }
+ }
+},
+{
/* Roland SH-201 */
USB_DEVICE(0x0582, 0x00ad),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
@@ -1719,17 +1731,6 @@
}
},
-{
- /* Creative Sound Blaster MP3+ */
- USB_DEVICE(0x041e, 0x3010),
- .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
- .vendor_name = "Creative Labs",
- .product_name = "Sound Blaster MP3+",
- .ifnum = QUIRK_NO_INTERFACE
- }
-
-},
-
/* Emagic devices */
{
USB_DEVICE(0x086a, 0x0001),