| /* |
| * Driver for the MDIO interface of Marvell network interfaces. |
| * |
| * Since the MDIO interface of Marvell network interfaces is shared |
| * between all network interfaces, having a single driver allows to |
| * handle concurrent accesses properly (you may have four Ethernet |
| * ports, but they in fact share the same SMI interface to access the |
| * MDIO bus). Moreover, this MDIO interface code is similar between |
| * the mv643xx_eth driver and the mvneta driver. For now, it is only |
| * used by the mvneta driver, but it could later be used by the |
| * mv643xx_eth driver as well. |
| * |
| * Copyright (C) 2012 Marvell |
| * |
| * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/phy.h> |
| #include <linux/of_address.h> |
| #include <linux/of_mdio.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| |
| #define MVMDIO_SMI_DATA_SHIFT 0 |
| #define MVMDIO_SMI_PHY_ADDR_SHIFT 16 |
| #define MVMDIO_SMI_PHY_REG_SHIFT 21 |
| #define MVMDIO_SMI_READ_OPERATION BIT(26) |
| #define MVMDIO_SMI_WRITE_OPERATION 0 |
| #define MVMDIO_SMI_READ_VALID BIT(27) |
| #define MVMDIO_SMI_BUSY BIT(28) |
| |
| struct orion_mdio_dev { |
| struct mutex lock; |
| void __iomem *smireg; |
| }; |
| |
| /* Wait for the SMI unit to be ready for another operation |
| */ |
| static int orion_mdio_wait_ready(struct mii_bus *bus) |
| { |
| struct orion_mdio_dev *dev = bus->priv; |
| int count; |
| u32 val; |
| |
| count = 0; |
| while (1) { |
| val = readl(dev->smireg); |
| if (!(val & MVMDIO_SMI_BUSY)) |
| break; |
| |
| if (count > 100) { |
| dev_err(bus->parent, "Timeout: SMI busy for too long\n"); |
| return -ETIMEDOUT; |
| } |
| |
| udelay(10); |
| count++; |
| } |
| |
| return 0; |
| } |
| |
| static int orion_mdio_read(struct mii_bus *bus, int mii_id, |
| int regnum) |
| { |
| struct orion_mdio_dev *dev = bus->priv; |
| int count; |
| u32 val; |
| int ret; |
| |
| mutex_lock(&dev->lock); |
| |
| ret = orion_mdio_wait_ready(bus); |
| if (ret < 0) { |
| mutex_unlock(&dev->lock); |
| return ret; |
| } |
| |
| writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | |
| (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | |
| MVMDIO_SMI_READ_OPERATION), |
| dev->smireg); |
| |
| /* Wait for the value to become available */ |
| count = 0; |
| while (1) { |
| val = readl(dev->smireg); |
| if (val & MVMDIO_SMI_READ_VALID) |
| break; |
| |
| if (count > 100) { |
| dev_err(bus->parent, "Timeout when reading PHY\n"); |
| mutex_unlock(&dev->lock); |
| return -ETIMEDOUT; |
| } |
| |
| udelay(10); |
| count++; |
| } |
| |
| mutex_unlock(&dev->lock); |
| |
| return val & 0xFFFF; |
| } |
| |
| static int orion_mdio_write(struct mii_bus *bus, int mii_id, |
| int regnum, u16 value) |
| { |
| struct orion_mdio_dev *dev = bus->priv; |
| int ret; |
| |
| mutex_lock(&dev->lock); |
| |
| ret = orion_mdio_wait_ready(bus); |
| if (ret < 0) { |
| mutex_unlock(&dev->lock); |
| return ret; |
| } |
| |
| writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | |
| (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | |
| MVMDIO_SMI_WRITE_OPERATION | |
| (value << MVMDIO_SMI_DATA_SHIFT)), |
| dev->smireg); |
| |
| mutex_unlock(&dev->lock); |
| |
| return 0; |
| } |
| |
| static int orion_mdio_reset(struct mii_bus *bus) |
| { |
| return 0; |
| } |
| |
| static int orion_mdio_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct mii_bus *bus; |
| struct orion_mdio_dev *dev; |
| int i, ret; |
| |
| bus = mdiobus_alloc_size(sizeof(struct orion_mdio_dev)); |
| if (!bus) { |
| dev_err(&pdev->dev, "Cannot allocate MDIO bus\n"); |
| return -ENOMEM; |
| } |
| |
| bus->name = "orion_mdio_bus"; |
| bus->read = orion_mdio_read; |
| bus->write = orion_mdio_write; |
| bus->reset = orion_mdio_reset; |
| snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", |
| dev_name(&pdev->dev)); |
| bus->parent = &pdev->dev; |
| |
| bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); |
| if (!bus->irq) { |
| mdiobus_free(bus); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < PHY_MAX_ADDR; i++) |
| bus->irq[i] = PHY_POLL; |
| |
| dev = bus->priv; |
| dev->smireg = of_iomap(pdev->dev.of_node, 0); |
| if (!dev->smireg) { |
| dev_err(&pdev->dev, "No SMI register address given in DT\n"); |
| kfree(bus->irq); |
| mdiobus_free(bus); |
| return -ENODEV; |
| } |
| |
| mutex_init(&dev->lock); |
| |
| ret = of_mdiobus_register(bus, np); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret); |
| iounmap(dev->smireg); |
| kfree(bus->irq); |
| mdiobus_free(bus); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, bus); |
| |
| return 0; |
| } |
| |
| static int orion_mdio_remove(struct platform_device *pdev) |
| { |
| struct mii_bus *bus = platform_get_drvdata(pdev); |
| mdiobus_unregister(bus); |
| kfree(bus->irq); |
| mdiobus_free(bus); |
| return 0; |
| } |
| |
| static const struct of_device_id orion_mdio_match[] = { |
| { .compatible = "marvell,orion-mdio" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, orion_mdio_match); |
| |
| static struct platform_driver orion_mdio_driver = { |
| .probe = orion_mdio_probe, |
| .remove = orion_mdio_remove, |
| .driver = { |
| .name = "orion-mdio", |
| .of_match_table = orion_mdio_match, |
| }, |
| }; |
| |
| module_platform_driver(orion_mdio_driver); |
| |
| MODULE_DESCRIPTION("Marvell MDIO interface driver"); |
| MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>"); |
| MODULE_LICENSE("GPL"); |