Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (23 commits)
USB Elan FTDI: check for workqueue creation
USB: fix spinlock recursion in cdc-acm.c
USB: fix Unaligned access in EHCI driver
USB: Product ID for FT232RL in ftdi_sio
USBNET: DM9501: Add Corega FEther USB-TXC support.
USB: ipaq.c: Additional devices
USB: further fix for usb-serial
USB: fix usb-serial device naming bug
USB: RTS/DTR signal patch for airprime driver
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer
usb-serial: fix shutdown / device_unregister order
USB: add Additional PIDs in ftdi_sio
USB: add QL355P power supply ids to fdti_sio
USB: New device IDs for cp2101 driver
USB: kill dead code from hub.c
USB: ratelimit debounce error messages
USB: pxa2xx_udc: fix hardcoded irq number
UHCI: fix port resume problem
USB: set the correct interval for interrupt URBs
USB: goku_udc: Remove crude cache coherency code
...
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9141193..856c8b1 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -126,7 +126,8 @@
See header of drivers/scsi/53c7xx.c.
See also Documentation/scsi/ncr53c7xx.txt.
- acpi= [HW,ACPI] Advanced Configuration and Power Interface
+ acpi= [HW,ACPI,X86-64,i386]
+ Advanced Configuration and Power Interface
Format: { force | off | ht | strict | noirq }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index e5eb97a..9ea5b8e 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -1072,7 +1072,28 @@
"ASUS A7V ACPI BIOS Revision 1007"),
},
},
-
+ {
+ /*
+ * Latest BIOS for IBM 600E (1.16) has bad pcinum
+ * for LPC bridge, which is needed for the PCI
+ * interrupt links to work. DSDT fix is in bug 5966.
+ * 2645, 2646 model numbers are shared with 600/600E/600X
+ */
+ .callback = disable_acpi_irq,
+ .ident = "IBM Thinkpad 600 Series 2645",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BOARD_NAME, "2645"),
+ },
+ },
+ {
+ .callback = disable_acpi_irq,
+ .ident = "IBM Thinkpad 600 Series 2646",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BOARD_NAME, "2646"),
+ },
+ },
/*
* Boxes that need ACPI PCI IRQ routing and PCI scan disabled
*/
diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c
index 8c331ca..c6216f4 100644
--- a/arch/ia64/sn/kernel/io_acpi_init.c
+++ b/arch/ia64/sn/kernel/io_acpi_init.c
@@ -53,12 +53,15 @@
}
/*
- * sn_hubdev_add - The 'add' function of the acpi_sn_hubdev_driver.
- * Called for every "SGIHUB" or "SGITIO" device defined
- * in the ACPI namespace.
+ * sn_acpi_hubdev_init() - This function is called by acpi_ns_get_device_callback()
+ * for all SGIHUB and SGITIO acpi devices defined in the
+ * DSDT. It obtains the hubdev_info pointer from the
+ * ACPI vendor resource, which the PROM setup, and sets up the
+ * hubdev_info in the pda.
*/
-static int __init
-sn_hubdev_add(struct acpi_device *device)
+
+static acpi_status __init
+sn_acpi_hubdev_init(acpi_handle handle, u32 depth, void *context, void **ret)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
u64 addr;
@@ -67,18 +70,19 @@
int i;
u64 nasid;
struct acpi_resource *resource;
- int ret = 0;
acpi_status status;
struct acpi_resource_vendor_typed *vendor;
extern void sn_common_hubdev_init(struct hubdev_info *);
- status = acpi_get_vendor_resource(device->handle, METHOD_NAME__CRS,
+ status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS,
&sn_uuid, &buffer);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR
- "sn_hubdev_add: acpi_get_vendor_resource() failed: %d\n",
- status);
- return 1;
+ "sn_acpi_hubdev_init: acpi_get_vendor_resource() "
+ "(0x%x) failed for: ", status);
+ acpi_ns_print_node_pathname(handle, NULL);
+ printk("\n");
+ return AE_OK; /* Continue walking namespace */
}
resource = buffer.pointer;
@@ -86,9 +90,10 @@
if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) !=
sizeof(struct hubdev_info *)) {
printk(KERN_ERR
- "sn_hubdev_add: Invalid vendor data length: %d\n",
+ "sn_acpi_hubdev_init: Invalid vendor data length: %d for: ",
vendor->byte_length);
- ret = 1;
+ acpi_ns_print_node_pathname(handle, NULL);
+ printk("\n");
goto exit;
}
@@ -103,7 +108,7 @@
exit:
kfree(buffer.pointer);
- return ret;
+ return AE_OK; /* Continue walking namespace */
}
/*
@@ -441,14 +446,6 @@
EXPORT_SYMBOL(sn_acpi_slot_fixup);
-static struct acpi_driver acpi_sn_hubdev_driver = {
- .name = "SGI HUBDEV Driver",
- .ids = "SGIHUB,SGITIO",
- .ops = {
- .add = sn_hubdev_add,
- },
-};
-
/*
* sn_acpi_bus_fixup - Perform SN specific setup of software structs
@@ -492,7 +489,10 @@
/* SN Altix does not follow the IOSAPIC IRQ routing model */
acpi_irq_model = ACPI_IRQ_MODEL_PLATFORM;
- acpi_bus_register_driver(&acpi_sn_hubdev_driver);
+ /* Setup hubdev_info for all SGIHUB/SGITIO devices */
+ acpi_get_devices("SGIHUB", sn_acpi_hubdev_init, NULL, NULL);
+ acpi_get_devices("SGITIO", sn_acpi_hubdev_init, NULL, NULL);
+
status = sal_ioif_init(&result);
if (status || result)
panic("sal_ioif_init failed: [%lx] %s\n",
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 8571e52..bd5373d 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -397,6 +397,8 @@
ia64_sn_set_os_feature(OSF_PCISEGMENT_ENABLE);
ia64_sn_set_os_feature(OSF_ACPI_ENABLE);
+ /* Load the new DSDT and SSDT tables into the global table list. */
+ acpi_table_init();
#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
/*
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 7c49e10..e2ce4a9 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -7,6 +7,7 @@
depends on !X86_VISWS
depends on !IA64_HP_SIM
depends on IA64 || X86
+ depends on PM
config ACPI
bool "ACPI Support"
@@ -243,6 +244,17 @@
If you are not sure, say N here.
+config ACPI_IBM_BAY
+ bool "Legacy Removable Bay Support"
+ depends on ACPI_IBM
+ default y
+ ---help---
+ Allows the ibm_acpi driver to handle removable bays. It will allow
+ disabling the device in the bay, and also generate notifications when
+ the bay lever is ejected or inserted.
+
+ If you are not sure, say Y here.
+
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on X86
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index f289fd4..3ec110c 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -79,11 +79,17 @@
{
int year = dmi_get_year(DMI_BIOS_DATE);
/* Doesn't exist? Likely an old system */
- if (year == -1)
+ if (year == -1) {
+ printk(KERN_ERR PREFIX "no DMI BIOS year, "
+ "acpi=force is required to enable ACPI\n" );
return 1;
+ }
/* 0? Likely a buggy new BIOS */
- if (year == 0)
+ if (year == 0) {
+ printk(KERN_ERR PREFIX "DMI BIOS year==0, "
+ "assuming ACPI-capable machine\n" );
return 0;
+ }
if (year < CONFIG_ACPI_BLACKLIST_YEAR) {
printk(KERN_ERR PREFIX "BIOS age (%d) fails cutoff (%d), "
"acpi=force is required to enable ACPI\n",
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index ab68883..a802962 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -100,6 +100,7 @@
unsigned long global_lock;
struct mutex lock;
atomic_t query_pending;
+ atomic_t event_count;
atomic_t leaving_burst; /* 0 : No, 1 : Yes, 2: abort */
wait_queue_head_t wait;
} *ec_ecdt;
@@ -131,10 +132,12 @@
outb(data, ec->data_addr);
}
-static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event)
+static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event,
+ unsigned old_count)
{
u8 status = acpi_ec_read_status(ec);
-
+ if (old_count == atomic_read(&ec->event_count))
+ return 0;
if (event == ACPI_EC_EVENT_OBF_1) {
if (status & ACPI_EC_FLAG_OBF)
return 1;
@@ -146,19 +149,19 @@
return 0;
}
-static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event)
+static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, unsigned count)
{
if (acpi_ec_mode == EC_POLL) {
unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
while (time_before(jiffies, delay)) {
- if (acpi_ec_check_status(ec, event))
+ if (acpi_ec_check_status(ec, event, 0))
return 0;
}
} else {
if (wait_event_timeout(ec->wait,
- acpi_ec_check_status(ec, event),
+ acpi_ec_check_status(ec, event, count),
msecs_to_jiffies(ACPI_EC_DELAY)) ||
- acpi_ec_check_status(ec, event)) {
+ acpi_ec_check_status(ec, event, 0)) {
return 0;
} else {
printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
@@ -225,21 +228,22 @@
u8 * rdata, unsigned rdata_len)
{
int result = 0;
-
+ unsigned count = atomic_read(&ec->event_count);
acpi_ec_write_cmd(ec, command);
for (; wdata_len > 0; --wdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count);
if (result) {
printk(KERN_ERR PREFIX
"write_cmd timeout, command = %d\n", command);
goto end;
}
+ count = atomic_read(&ec->event_count);
acpi_ec_write_data(ec, *(wdata++));
}
if (!rdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count);
if (result) {
printk(KERN_ERR PREFIX
"finish-write timeout, command = %d\n", command);
@@ -250,13 +254,13 @@
}
for (; rdata_len > 0; --rdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1);
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, count);
if (result) {
printk(KERN_ERR PREFIX "read timeout, command = %d\n",
command);
goto end;
}
-
+ count = atomic_read(&ec->event_count);
*(rdata++) = acpi_ec_read_data(ec);
}
end:
@@ -288,7 +292,7 @@
/* Make sure GPE is enabled before doing transaction */
acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
- status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0);
+ status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0);
if (status) {
printk(KERN_DEBUG PREFIX
"input buffer is not empty, aborting transaction\n");
@@ -369,8 +373,8 @@
EXPORT_SYMBOL(ec_write);
int ec_transaction(u8 command,
- const u8 * wdata, unsigned wdata_len,
- u8 * rdata, unsigned rdata_len)
+ const u8 * wdata, unsigned wdata_len,
+ u8 * rdata, unsigned rdata_len)
{
struct acpi_ec *ec;
@@ -435,7 +439,7 @@
acpi_status status = AE_OK;
u8 value;
struct acpi_ec *ec = (struct acpi_ec *)data;
-
+ atomic_inc(&ec->event_count);
if (acpi_ec_mode == EC_INTR) {
wake_up(&ec->wait);
}
@@ -633,6 +637,7 @@
ec->uid = -1;
mutex_init(&ec->lock);
atomic_set(&ec->query_pending, 0);
+ atomic_set(&ec->event_count, 1);
if (acpi_ec_mode == EC_INTR) {
atomic_set(&ec->leaving_burst, 1);
init_waitqueue_head(&ec->wait);
@@ -807,6 +812,7 @@
acpi_status status;
mutex_init(&ec_ecdt->lock);
+ atomic_set(&ec_ecdt->event_count, 1);
if (acpi_ec_mode == EC_INTR) {
init_waitqueue_head(&ec_ecdt->wait);
}
@@ -888,6 +894,7 @@
return -ENOMEM;
mutex_init(&ec_ecdt->lock);
+ atomic_set(&ec_ecdt->event_count, 1);
if (acpi_ec_mode == EC_INTR) {
init_waitqueue_head(&ec_ecdt->wait);
}
@@ -1016,8 +1023,7 @@
acpi_ec_mode = EC_POLL;
}
acpi_ec_driver.ops.add = acpi_ec_add;
- printk(KERN_NOTICE PREFIX "%s mode.\n",
- intr ? "interrupt" : "polling");
+ printk(KERN_NOTICE PREFIX "%s mode.\n", intr ? "interrupt" : "polling");
return 1;
}
diff --git a/drivers/acpi/events/evmisc.c b/drivers/acpi/events/evmisc.c
index d572700..8dcade63 100644
--- a/drivers/acpi/events/evmisc.c
+++ b/drivers/acpi/events/evmisc.c
@@ -423,6 +423,8 @@
* the global lock appear as a standard mutex on the OS side.
*
*****************************************************************************/
+static acpi_thread_id acpi_ev_global_lock_thread_id;
+static int acpi_ev_global_lock_acquired;
acpi_status acpi_ev_acquire_global_lock(u16 timeout)
{
@@ -435,11 +437,24 @@
* Only one thread can acquire the GL at a time, the global_lock_mutex
* enforces this. This interface releases the interpreter if we must wait.
*/
- status = acpi_ex_system_wait_mutex(acpi_gbl_global_lock_mutex, timeout);
+ status = acpi_ex_system_wait_mutex(acpi_gbl_global_lock_mutex, 0);
+ if (status == AE_TIME) {
+ if (acpi_ev_global_lock_thread_id == acpi_os_get_thread_id()) {
+ acpi_ev_global_lock_acquired++;
+ return AE_OK;
+ }
+ }
+
+ if (ACPI_FAILURE(status)) {
+ status = acpi_ex_system_wait_mutex(acpi_gbl_global_lock_mutex, timeout);
+ }
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
+ acpi_ev_global_lock_thread_id = acpi_os_get_thread_id();
+ acpi_ev_global_lock_acquired++;
+
/*
* Make sure that a global lock actually exists. If not, just treat
* the lock as a standard mutex.
@@ -506,6 +521,11 @@
return_ACPI_STATUS(AE_NOT_ACQUIRED);
}
+ acpi_ev_global_lock_acquired--;
+ if (acpi_ev_global_lock_acquired > 0) {
+ return AE_OK;
+ }
+
if (acpi_gbl_global_lock_present) {
/* Allow any thread to release the lock */
@@ -529,7 +549,8 @@
acpi_gbl_global_lock_acquired = FALSE;
/* Release the local GL mutex */
-
+ acpi_ev_global_lock_thread_id = 0;
+ acpi_ev_global_lock_acquired = 0;
acpi_os_release_mutex(acpi_gbl_global_lock_mutex);
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c
index 4cc534e..3690136 100644
--- a/drivers/acpi/ibm_acpi.c
+++ b/drivers/acpi/ibm_acpi.c
@@ -86,6 +86,7 @@
#include <linux/proc_fs.h>
#include <linux/backlight.h>
+#include <linux/fb.h>
#include <asm/uaccess.h>
#include <linux/dmi.h>
@@ -157,6 +158,7 @@
"\\_SB.PCI.ISA.SLCE", /* 570 */
); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
#endif
+#ifdef CONFIG_ACPI_IBM_BAY
IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
"\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
"\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
@@ -174,6 +176,7 @@
IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */
"_EJ0", /* 770x */
); /* all others */
+#endif /* CONFIG_ACPI_IBM_BAY */
/* don't list other alternatives as we install a notify handler on the 570 */
IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
@@ -1044,6 +1047,7 @@
return 0;
}
+#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY)
static int _sta(acpi_handle handle)
{
int status;
@@ -1053,6 +1057,7 @@
return status;
}
+#endif
#ifdef CONFIG_ACPI_IBM_DOCK
#define dock_docked() (_sta(dock_handle) & 1)
@@ -1119,6 +1124,7 @@
}
#endif
+#ifdef CONFIG_ACPI_IBM_BAY
static int bay_status_supported;
static int bay_status2_supported;
static int bay_eject_supported;
@@ -1194,6 +1200,7 @@
{
acpi_bus_generate_event(ibm->device, event, 0);
}
+#endif /* CONFIG_ACPI_IBM_BAY */
static int cmos_read(char *p)
{
@@ -1701,7 +1708,10 @@
static int brightness_update_status(struct backlight_device *bd)
{
- return brightness_set(bd->props.brightness);
+ return brightness_set(
+ (bd->props.fb_blank == FB_BLANK_UNBLANK &&
+ bd->props.power == FB_BLANK_UNBLANK) ?
+ bd->props.brightness : 0);
}
static struct backlight_ops ibm_backlight_data = {
@@ -1711,6 +1721,12 @@
static int brightness_init(void)
{
+ int b;
+
+ b = brightness_get(NULL);
+ if (b < 0)
+ return b;
+
ibm_backlight_device = backlight_device_register("ibm", NULL, NULL,
&ibm_backlight_data);
if (IS_ERR(ibm_backlight_device)) {
@@ -1718,7 +1734,9 @@
return PTR_ERR(ibm_backlight_device);
}
- ibm_backlight_device->props.max_brightness = 7;
+ ibm_backlight_device->props.max_brightness = 7;
+ ibm_backlight_device->props.brightness = b;
+ backlight_update_status(ibm_backlight_device);
return 0;
}
@@ -2353,6 +2371,7 @@
.type = ACPI_SYSTEM_NOTIFY,
},
#endif
+#ifdef CONFIG_ACPI_IBM_BAY
{
.name = "bay",
.init = bay_init,
@@ -2362,6 +2381,7 @@
.handle = &bay_handle,
.type = ACPI_SYSTEM_NOTIFY,
},
+#endif /* CONFIG_ACPI_IBM_BAY */
{
.name = "cmos",
.read = cmos_read,
@@ -2647,7 +2667,9 @@
#ifdef CONFIG_ACPI_IBM_DOCK
IBM_PARAM(dock);
#endif
+#ifdef CONFIG_ACPI_IBM_BAY
IBM_PARAM(bay);
+#endif /* CONFIG_ACPI_IBM_BAY */
IBM_PARAM(cmos);
IBM_PARAM(led);
IBM_PARAM(beep);
@@ -2723,12 +2745,14 @@
IBM_HANDLE_INIT(dock);
#endif
IBM_HANDLE_INIT(pci);
+#ifdef CONFIG_ACPI_IBM_BAY
IBM_HANDLE_INIT(bay);
if (bay_handle)
IBM_HANDLE_INIT(bay_ej);
IBM_HANDLE_INIT(bay2);
if (bay2_handle)
IBM_HANDLE_INIT(bay2_ej);
+#endif /* CONFIG_ACPI_IBM_BAY */
IBM_HANDLE_INIT(beep);
IBM_HANDLE_INIT(ecrd);
IBM_HANDLE_INIT(ecwr);
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 1ef3385..4ffecd1 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -436,8 +436,6 @@
cl = &device->power.states[device->power.state].resources;
tl = &device->power.states[state].resources;
- device->power.state = ACPI_STATE_UNKNOWN;
-
if (!cl->count && !tl->count) {
result = -ENODEV;
goto end;
@@ -468,12 +466,15 @@
goto end;
}
- /* We shouldn't change the state till all above operations succeed */
- device->power.state = state;
- end:
- if (result)
+ end:
+ if (result) {
+ device->power.state = ACPI_STATE_UNKNOWN;
printk(KERN_WARNING PREFIX "Transitioning device [%s] to D%d\n",
device->pnp.bus_id, state);
+ } else {
+ /* We shouldn't change the state till all above operations succeed */
+ device->power.state = state;
+ }
return result;
}
@@ -687,13 +688,6 @@
return result;
mutex_lock(&resource->resource_lock);
- if ((resource->state == ACPI_POWER_RESOURCE_STATE_ON) &&
- list_empty(&resource->reference)) {
- mutex_unlock(&resource->resource_lock);
- result = acpi_power_off_device(device->handle, NULL);
- return result;
- }
-
if ((resource->state == ACPI_POWER_RESOURCE_STATE_OFF) &&
!list_empty(&resource->reference)) {
ref = container_of(resource->reference.next, struct acpi_power_reference, node);
diff --git a/drivers/acpi/resources/rscreate.c b/drivers/acpi/resources/rscreate.c
index 1358c06..cc48ab0 100644
--- a/drivers/acpi/resources/rscreate.c
+++ b/drivers/acpi/resources/rscreate.c
@@ -191,6 +191,9 @@
user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer);
for (index = 0; index < number_of_elements; index++) {
+ int source_name_index = 2;
+ int source_index_index = 3;
+
/*
* Point user_prt past this current structure
*
@@ -261,10 +264,28 @@
}
/*
+ * If BIOS erroneously reversed the _PRT source_name and source_index,
+ * then reverse them back.
+ */
+ if (ACPI_GET_OBJECT_TYPE (sub_object_list[3]) != ACPI_TYPE_INTEGER) {
+ if (acpi_gbl_enable_interpreter_slack) {
+ source_name_index = 3;
+ source_index_index = 2;
+ printk(KERN_WARNING "ACPI: Handling Garbled _PRT entry\n");
+ } else {
+ ACPI_ERROR((AE_INFO,
+ "(PRT[%X].source_index) Need Integer, found %s",
+ index,
+ acpi_ut_get_object_type_name(sub_object_list[3])));
+ return_ACPI_STATUS(AE_BAD_DATA);
+ }
+ }
+
+ /*
* 3) Third subobject: Dereference the PRT.source_name
* The name may be unresolved (slack mode), so allow a null object
*/
- obj_desc = sub_object_list[2];
+ obj_desc = sub_object_list[source_name_index];
if (obj_desc) {
switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
case ACPI_TYPE_LOCAL_REFERENCE:
@@ -339,7 +360,7 @@
/* 4) Fourth subobject: Dereference the PRT.source_index */
- obj_desc = sub_object_list[3];
+ obj_desc = sub_object_list[source_index_index];
if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
user_prt->source_index = (u32) obj_desc->integer.value;
} else {
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 0771b43..00d25b3 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -102,9 +102,9 @@
struct acpi_video_device_attrib {
u32 display_index:4; /* A zero-based instance of the Display */
- u32 display_port_attachment:4; /*This field differenates displays type */
+ u32 display_port_attachment:4; /*This field differentiates the display type */
u32 display_type:4; /*Describe the specific type in use */
- u32 vendor_specific:4; /*Chipset Vendor Specifi */
+ u32 vendor_specific:4; /*Chipset Vendor Specific */
u32 bios_can_detect:1; /*BIOS can detect the device */
u32 depend_on_vga:1; /*Non-VGA output device whose power is related to
the VGA device. */
@@ -484,16 +484,16 @@
* 0. The system BIOS should NOT automatically switch(toggle)
* the active display output.
* 1. The system BIOS should automatically switch (toggle) the
- * active display output. No swich event.
+ * active display output. No switch event.
* 2. The _DGS value should be locked.
* 3. The system BIOS should not automatically switch (toggle) the
* active display output, but instead generate the display switch
* event notify code.
* lcd_flag :
* 0. The system BIOS should automatically control the brightness level
- * of the LCD, when the power changes from AC to DC
+ * of the LCD when the power changes from AC to DC
* 1. The system BIOS should NOT automatically control the brightness
- * level of the LCD, when the power changes from AC to DC.
+ * level of the LCD when the power changes from AC to DC.
* Return Value:
* -1 wrong arg.
*/
@@ -525,7 +525,7 @@
* Return Value:
* None
*
- * Find out all required AML method defined under the output
+ * Find out all required AML methods defined under the output
* device.
*/
@@ -636,7 +636,7 @@
* Return Value:
* None
*
- * Find out all required AML method defined under the video bus device.
+ * Find out all required AML methods defined under the video bus device.
*/
static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
@@ -681,19 +681,19 @@
* to check well known required nodes.
*/
- /* Does this device able to support video switching ? */
+ /* Does this device support video switching? */
if (video->cap._DOS) {
video->flags.multihead = 1;
status = 0;
}
- /* Does this device able to retrieve a retrieve a video ROM ? */
+ /* Does this device support retrieving a video ROM? */
if (video->cap._ROM) {
video->flags.rom = 1;
status = 0;
}
- /* Does this device able to configure which video device to POST ? */
+ /* Does this device support configuring which video device to POST? */
if (video->cap._GPD && video->cap._SPD && video->cap._VPO) {
video->flags.post = 1;
status = 0;
@@ -860,7 +860,7 @@
if (level > 100)
return -EFAULT;
- /* validate though the list of available levels */
+ /* validate through the list of available levels */
for (i = 0; i < dev->brightness->count; i++)
if (level == dev->brightness->levels[i]) {
if (ACPI_SUCCESS
@@ -1065,10 +1065,10 @@
printk(KERN_WARNING PREFIX
"The motherboard VGA device is not listed as a possible POST device.\n");
printk(KERN_WARNING PREFIX
- "This indicate a BIOS bug. Please contact the manufacturer.\n");
+ "This indicates a BIOS bug. Please contact the manufacturer.\n");
}
printk("%lx\n", options);
- seq_printf(seq, "can POST: <intgrated video>");
+ seq_printf(seq, "can POST: <integrated video>");
if (options & 2)
seq_printf(seq, " <PCI video>");
if (options & 4)
@@ -1102,7 +1102,7 @@
seq_printf(seq, "<not supported>\n");
goto end;
}
- seq_printf(seq, "device posted is <%s>\n", device_decode[id & 3]);
+ seq_printf(seq, "device POSTed is <%s>\n", device_decode[id & 3]);
end:
return 0;
@@ -1156,7 +1156,7 @@
if (opt > 3)
return -EFAULT;
- /* just in case an OEM 'forget' the motherboard... */
+ /* just in case an OEM 'forgot' the motherboard... */
options |= 1;
if (options & (1ul << opt)) {
@@ -1527,13 +1527,13 @@
/*
* Arg:
* video : video bus device
- * event : Nontify Event
+ * event : notify event
*
* Return:
* < 0 : error
*
* 1. Find out the current active output device.
- * 2. Identify the next output device to switch
+ * 2. Identify the next output device to switch to.
* 3. call _DSS to do actual switch.
*/
@@ -1723,12 +1723,12 @@
device = video->device;
switch (event) {
- case ACPI_VIDEO_NOTIFY_SWITCH: /* User request that a switch occur,
+ case ACPI_VIDEO_NOTIFY_SWITCH: /* User requested a switch,
* most likely via hotkey. */
acpi_bus_generate_event(device, event, 0);
break;
- case ACPI_VIDEO_NOTIFY_PROBE: /* User plug or remove a video
+ case ACPI_VIDEO_NOTIFY_PROBE: /* User plugged in or removed a video
* connector. */
acpi_video_device_enumerate(video);
acpi_video_device_rebind(video);
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 019d8ff..c428a56 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -576,6 +576,13 @@
if (noacpi)
return 0;
+ /*
+ * TBD - implement PATA support. For now,
+ * we should not run GTF on PATA devices since some
+ * PATA require execution of GTM/STM before GTF.
+ */
+ if (!(ap->cbl == ATA_CBL_SATA))
+ return 0;
for (ix = 0; ix < ATA_MAX_DEVICES; ix++) {
if (!ata_dev_enabled(&ap->device[ix]))
diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c
index 295e931..4b23212 100644
--- a/drivers/misc/asus-laptop.c
+++ b/drivers/misc/asus-laptop.c
@@ -211,7 +211,7 @@
enum led_brightness value); \
static void object##_led_update(struct work_struct *ignored); \
static int object##_led_wk; \
- DECLARE_WORK(object##_led_work, object##_led_update); \
+ static DECLARE_WORK(object##_led_work, object##_led_update); \
static struct led_classdev object##_led = { \
.name = "asus:" ledname, \
.brightness_set = object##_led_set, \
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
index 2ebe240..ac708bc 100644
--- a/drivers/misc/sony-laptop.c
+++ b/drivers/misc/sony-laptop.c
@@ -453,7 +453,7 @@
static int sony_acpi_add(struct acpi_device *device)
{
acpi_status status;
- int result;
+ int result = 0;
acpi_handle handle;
sony_acpi_acpi_device = device;
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 7a53554..118ac97 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -89,6 +89,7 @@
return;
res->irq_resource[i].flags = IORESOURCE_IRQ; // Also clears _UNSET flag
+ res->irq_resource[i].flags |= irq_flags(triggering, polarity);
irq = acpi_register_gsi(gsi, triggering, polarity);
if (irq < 0) {
res->irq_resource[i].flags |= IORESOURCE_DISABLED;
@@ -103,8 +104,52 @@
pcibios_penalize_isa_irq(irq, 1);
}
+static int dma_flags(int type, int bus_master, int transfer)
+{
+ int flags = 0;
+
+ if (bus_master)
+ flags |= IORESOURCE_DMA_MASTER;
+ switch (type) {
+ case ACPI_COMPATIBILITY:
+ flags |= IORESOURCE_DMA_COMPATIBLE;
+ break;
+ case ACPI_TYPE_A:
+ flags |= IORESOURCE_DMA_TYPEA;
+ break;
+ case ACPI_TYPE_B:
+ flags |= IORESOURCE_DMA_TYPEB;
+ break;
+ case ACPI_TYPE_F:
+ flags |= IORESOURCE_DMA_TYPEF;
+ break;
+ default:
+ /* Set a default value ? */
+ flags |= IORESOURCE_DMA_COMPATIBLE;
+ pnp_err("Invalid DMA type");
+ }
+ switch (transfer) {
+ case ACPI_TRANSFER_8:
+ flags |= IORESOURCE_DMA_8BIT;
+ break;
+ case ACPI_TRANSFER_8_16:
+ flags |= IORESOURCE_DMA_8AND16BIT;
+ break;
+ case ACPI_TRANSFER_16:
+ flags |= IORESOURCE_DMA_16BIT;
+ break;
+ default:
+ /* Set a default value ? */
+ flags |= IORESOURCE_DMA_8AND16BIT;
+ pnp_err("Invalid DMA transfer type");
+ }
+
+ return flags;
+}
+
static void
-pnpacpi_parse_allocated_dmaresource(struct pnp_resource_table *res, u32 dma)
+pnpacpi_parse_allocated_dmaresource(struct pnp_resource_table *res, u32 dma,
+ int type, int bus_master, int transfer)
{
int i = 0;
while (i < PNP_MAX_DMA &&
@@ -112,6 +157,7 @@
i++;
if (i < PNP_MAX_DMA) {
res->dma_resource[i].flags = IORESOURCE_DMA; // Also clears _UNSET flag
+ res->dma_resource[i].flags |= dma_flags(type, bus_master, transfer);
if (dma == -1) {
res->dma_resource[i].flags |= IORESOURCE_DISABLED;
return;
@@ -123,7 +169,7 @@
static void
pnpacpi_parse_allocated_ioresource(struct pnp_resource_table *res,
- u64 io, u64 len)
+ u64 io, u64 len, int io_decode)
{
int i = 0;
while (!(res->port_resource[i].flags & IORESOURCE_UNSET) &&
@@ -131,6 +177,8 @@
i++;
if (i < PNP_MAX_PORT) {
res->port_resource[i].flags = IORESOURCE_IO; // Also clears _UNSET flag
+ if (io_decode == ACPI_DECODE_16)
+ res->port_resource[i].flags |= PNP_PORT_FLAG_16BITADDR;
if (len <= 0 || (io + len -1) >= 0x10003) {
res->port_resource[i].flags |= IORESOURCE_DISABLED;
return;
@@ -142,7 +190,7 @@
static void
pnpacpi_parse_allocated_memresource(struct pnp_resource_table *res,
- u64 mem, u64 len)
+ u64 mem, u64 len, int write_protect)
{
int i = 0;
while (!(res->mem_resource[i].flags & IORESOURCE_UNSET) &&
@@ -154,6 +202,9 @@
res->mem_resource[i].flags |= IORESOURCE_DISABLED;
return;
}
+ if(write_protect == ACPI_READ_WRITE_MEMORY)
+ res->mem_resource[i].flags |= IORESOURCE_MEM_WRITEABLE;
+
res->mem_resource[i].start = mem;
res->mem_resource[i].end = mem + len - 1;
}
@@ -178,10 +229,11 @@
if (p->resource_type == ACPI_MEMORY_RANGE)
pnpacpi_parse_allocated_memresource(res_table,
- p->minimum, p->address_length);
+ p->minimum, p->address_length, p->info.mem.write_protect);
else if (p->resource_type == ACPI_IO_RANGE)
pnpacpi_parse_allocated_ioresource(res_table,
- p->minimum, p->address_length);
+ p->minimum, p->address_length,
+ p->granularity == 0xfff ? ACPI_DECODE_10 : ACPI_DECODE_16);
}
static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
@@ -208,13 +260,17 @@
case ACPI_RESOURCE_TYPE_DMA:
if (res->data.dma.channel_count > 0)
pnpacpi_parse_allocated_dmaresource(res_table,
- res->data.dma.channels[0]);
+ res->data.dma.channels[0],
+ res->data.dma.type,
+ res->data.dma.bus_master,
+ res->data.dma.transfer);
break;
case ACPI_RESOURCE_TYPE_IO:
pnpacpi_parse_allocated_ioresource(res_table,
res->data.io.minimum,
- res->data.io.address_length);
+ res->data.io.address_length,
+ res->data.io.io_decode);
break;
case ACPI_RESOURCE_TYPE_START_DEPENDENT:
@@ -224,7 +280,8 @@
case ACPI_RESOURCE_TYPE_FIXED_IO:
pnpacpi_parse_allocated_ioresource(res_table,
res->data.fixed_io.address,
- res->data.fixed_io.address_length);
+ res->data.fixed_io.address_length,
+ ACPI_DECODE_10);
break;
case ACPI_RESOURCE_TYPE_VENDOR:
@@ -236,17 +293,20 @@
case ACPI_RESOURCE_TYPE_MEMORY24:
pnpacpi_parse_allocated_memresource(res_table,
res->data.memory24.minimum,
- res->data.memory24.address_length);
+ res->data.memory24.address_length,
+ res->data.memory24.write_protect);
break;
case ACPI_RESOURCE_TYPE_MEMORY32:
pnpacpi_parse_allocated_memresource(res_table,
res->data.memory32.minimum,
- res->data.memory32.address_length);
+ res->data.memory32.address_length,
+ res->data.memory32.write_protect);
break;
case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
pnpacpi_parse_allocated_memresource(res_table,
res->data.fixed_memory32.address,
- res->data.fixed_memory32.address_length);
+ res->data.fixed_memory32.address_length,
+ res->data.fixed_memory32.write_protect);
break;
case ACPI_RESOURCE_TYPE_ADDRESS16:
case ACPI_RESOURCE_TYPE_ADDRESS32:
@@ -304,42 +364,8 @@
for(i = 0; i < p->channel_count; i++)
dma->map |= 1 << p->channels[i];
- dma->flags = 0;
- if (p->bus_master)
- dma->flags |= IORESOURCE_DMA_MASTER;
- switch (p->type) {
- case ACPI_COMPATIBILITY:
- dma->flags |= IORESOURCE_DMA_COMPATIBLE;
- break;
- case ACPI_TYPE_A:
- dma->flags |= IORESOURCE_DMA_TYPEA;
- break;
- case ACPI_TYPE_B:
- dma->flags |= IORESOURCE_DMA_TYPEB;
- break;
- case ACPI_TYPE_F:
- dma->flags |= IORESOURCE_DMA_TYPEF;
- break;
- default:
- /* Set a default value ? */
- dma->flags |= IORESOURCE_DMA_COMPATIBLE;
- pnp_err("Invalid DMA type");
- }
- switch (p->transfer) {
- case ACPI_TRANSFER_8:
- dma->flags |= IORESOURCE_DMA_8BIT;
- break;
- case ACPI_TRANSFER_8_16:
- dma->flags |= IORESOURCE_DMA_8AND16BIT;
- break;
- case ACPI_TRANSFER_16:
- dma->flags |= IORESOURCE_DMA_16BIT;
- break;
- default:
- /* Set a default value ? */
- dma->flags |= IORESOURCE_DMA_8AND16BIT;
- pnp_err("Invalid DMA transfer type");
- }
+
+ dma->flags = dma_flags(p->type, p->bus_master, p->transfer);
pnp_register_dma_resource(option, dma);
return;