cpufreq: exynos5250: Set APLL rate using CCF API
Use common clock framework (CCF) APIs to set the clock rates
instead of direct register manipulation. This now updates the
sysfs entry (cpuinfo_cur_freq) correctly which did not reflect
the correct value until now. While at it clean up the PLL s-div
parameter setting as it is handled by the PLL driver.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index 8feda86..86fb1a1 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -102,12 +102,12 @@
cpu_relax();
}
-static void set_apll(unsigned int new_index,
- unsigned int old_index)
+static void set_apll(unsigned int index)
{
- unsigned int tmp, pdiv;
+ unsigned int tmp;
+ unsigned int freq = apll_freq_5250[index].freq;
- /* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
+ /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
clk_set_parent(moutcore, mout_mpll);
do {
@@ -116,24 +116,9 @@
tmp &= 0x7;
} while (tmp != 0x2);
- /* 2. Set APLL Lock time */
- pdiv = ((apll_freq_5250[new_index].mps >> 8) & 0x3f);
+ clk_set_rate(mout_apll, freq * 1000);
- __raw_writel((pdiv * 250), EXYNOS5_APLL_LOCK);
-
- /* 3. Change PLL PMS values */
- tmp = __raw_readl(EXYNOS5_APLL_CON0);
- tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
- tmp |= apll_freq_5250[new_index].mps;
- __raw_writel(tmp, EXYNOS5_APLL_CON0);
-
- /* 4. wait_lock_time */
- do {
- cpu_relax();
- tmp = __raw_readl(EXYNOS5_APLL_CON0);
- } while (!(tmp & (0x1 << 29)));
-
- /* 5. MUX_CORE_SEL = APLL */
+ /* MUX_CORE_SEL = APLL */
clk_set_parent(moutcore, mout_apll);
do {
@@ -141,55 +126,17 @@
tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU);
tmp &= (0x7 << 16);
} while (tmp != (0x1 << 16));
-
-}
-
-static bool exynos5250_pms_change(unsigned int old_index, unsigned int new_index)
-{
- unsigned int old_pm = apll_freq_5250[old_index].mps >> 8;
- unsigned int new_pm = apll_freq_5250[new_index].mps >> 8;
-
- return (old_pm == new_pm) ? 0 : 1;
}
static void exynos5250_set_frequency(unsigned int old_index,
unsigned int new_index)
{
- unsigned int tmp;
-
if (old_index > new_index) {
- if (!exynos5250_pms_change(old_index, new_index)) {
- /* 1. Change the system clock divider values */
- set_clkdiv(new_index);
- /* 2. Change just s value in apll m,p,s value */
- tmp = __raw_readl(EXYNOS5_APLL_CON0);
- tmp &= ~(0x7 << 0);
- tmp |= apll_freq_5250[new_index].mps & 0x7;
- __raw_writel(tmp, EXYNOS5_APLL_CON0);
-
- } else {
- /* Clock Configuration Procedure */
- /* 1. Change the system clock divider values */
- set_clkdiv(new_index);
- /* 2. Change the apll m,p,s value */
- set_apll(new_index, old_index);
- }
+ set_clkdiv(new_index);
+ set_apll(new_index);
} else if (old_index < new_index) {
- if (!exynos5250_pms_change(old_index, new_index)) {
- /* 1. Change just s value in apll m,p,s value */
- tmp = __raw_readl(EXYNOS5_APLL_CON0);
- tmp &= ~(0x7 << 0);
- tmp |= apll_freq_5250[new_index].mps & 0x7;
- __raw_writel(tmp, EXYNOS5_APLL_CON0);
- /* 2. Change the system clock divider values */
- set_clkdiv(new_index);
- } else {
- /* Clock Configuration Procedure */
- /* 1. Change the apll m,p,s value */
- set_apll(new_index, old_index);
- /* 2. Change the system clock divider values */
- set_clkdiv(new_index);
- }
+ set_apll(new_index);
+ set_clkdiv(new_index);
}
}
@@ -222,7 +169,6 @@
info->volt_table = exynos5250_volt_table;
info->freq_table = exynos5250_freq_table;
info->set_freq = exynos5250_set_frequency;
- info->need_apll_change = exynos5250_pms_change;
return 0;