Merge branch 'master'
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index 375ae76..d260d92 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -415,6 +415,362 @@
</sect1>
</chapter>
+ <chapter id="libataEH">
+ <title>Error handling</title>
+
+ <para>
+ This chapter describes how errors are handled under libata.
+ Readers are advised to read SCSI EH
+ (Documentation/scsi/scsi_eh.txt) and ATA exceptions doc first.
+ </para>
+
+ <sect1><title>Origins of commands</title>
+ <para>
+ In libata, a command is represented with struct ata_queued_cmd
+ or qc. qc's are preallocated during port initialization and
+ repetitively used for command executions. Currently only one
+ qc is allocated per port but yet-to-be-merged NCQ branch
+ allocates one for each tag and maps each qc to NCQ tag 1-to-1.
+ </para>
+ <para>
+ libata commands can originate from two sources - libata itself
+ and SCSI midlayer. libata internal commands are used for
+ initialization and error handling. All normal blk requests
+ and commands for SCSI emulation are passed as SCSI commands
+ through queuecommand callback of SCSI host template.
+ </para>
+ </sect1>
+
+ <sect1><title>How commands are issued</title>
+
+ <variablelist>
+
+ <varlistentry><term>Internal commands</term>
+ <listitem>
+ <para>
+ First, qc is allocated and initialized using
+ ata_qc_new_init(). Although ata_qc_new_init() doesn't
+ implement any wait or retry mechanism when qc is not
+ available, internal commands are currently issued only during
+ initialization and error recovery, so no other command is
+ active and allocation is guaranteed to succeed.
+ </para>
+ <para>
+ Once allocated qc's taskfile is initialized for the command to
+ be executed. qc currently has two mechanisms to notify
+ completion. One is via qc->complete_fn() callback and the
+ other is completion qc->waiting. qc->complete_fn() callback
+ is the asynchronous path used by normal SCSI translated
+ commands and qc->waiting is the synchronous (issuer sleeps in
+ process context) path used by internal commands.
+ </para>
+ <para>
+ Once initialization is complete, host_set lock is acquired
+ and the qc is issued.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>SCSI commands</term>
+ <listitem>
+ <para>
+ All libata drivers use ata_scsi_queuecmd() as
+ hostt->queuecommand callback. scmds can either be simulated
+ or translated. No qc is involved in processing a simulated
+ scmd. The result is computed right away and the scmd is
+ completed.
+ </para>
+ <para>
+ For a translated scmd, ata_qc_new_init() is invoked to
+ allocate a qc and the scmd is translated into the qc. SCSI
+ midlayer's completion notification function pointer is stored
+ into qc->scsidone.
+ </para>
+ <para>
+ qc->complete_fn() callback is used for completion
+ notification. ATA commands use ata_scsi_qc_complete() while
+ ATAPI commands use atapi_qc_complete(). Both functions end up
+ calling qc->scsidone to notify upper layer when the qc is
+ finished. After translation is completed, the qc is issued
+ with ata_qc_issue().
+ </para>
+ <para>
+ Note that SCSI midlayer invokes hostt->queuecommand while
+ holding host_set lock, so all above occur while holding
+ host_set lock.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+ </sect1>
+
+ <sect1><title>How commands are processed</title>
+ <para>
+ Depending on which protocol and which controller are used,
+ commands are processed differently. For the purpose of
+ discussion, a controller which uses taskfile interface and all
+ standard callbacks is assumed.
+ </para>
+ <para>
+ Currently 6 ATA command protocols are used. They can be
+ sorted into the following four categories according to how
+ they are processed.
+ </para>
+
+ <variablelist>
+ <varlistentry><term>ATA NO DATA or DMA</term>
+ <listitem>
+ <para>
+ ATA_PROT_NODATA and ATA_PROT_DMA fall into this category.
+ These types of commands don't require any software
+ intervention once issued. Device will raise interrupt on
+ completion.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>ATA PIO</term>
+ <listitem>
+ <para>
+ ATA_PROT_PIO is in this category. libata currently
+ implements PIO with polling. ATA_NIEN bit is set to turn
+ off interrupt and pio_task on ata_wq performs polling and
+ IO.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>ATAPI NODATA or DMA</term>
+ <listitem>
+ <para>
+ ATA_PROT_ATAPI_NODATA and ATA_PROT_ATAPI_DMA are in this
+ category. packet_task is used to poll BSY bit after
+ issuing PACKET command. Once BSY is turned off by the
+ device, packet_task transfers CDB and hands off processing
+ to interrupt handler.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>ATAPI PIO</term>
+ <listitem>
+ <para>
+ ATA_PROT_ATAPI is in this category. ATA_NIEN bit is set
+ and, as in ATAPI NODATA or DMA, packet_task submits cdb.
+ However, after submitting cdb, further processing (data
+ transfer) is handed off to pio_task.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </sect1>
+
+ <sect1><title>How commands are completed</title>
+ <para>
+ Once issued, all qc's are either completed with
+ ata_qc_complete() or time out. For commands which are handled
+ by interrupts, ata_host_intr() invokes ata_qc_complete(), and,
+ for PIO tasks, pio_task invokes ata_qc_complete(). In error
+ cases, packet_task may also complete commands.
+ </para>
+ <para>
+ ata_qc_complete() does the following.
+ </para>
+
+ <orderedlist>
+
+ <listitem>
+ <para>
+ DMA memory is unmapped.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ ATA_QCFLAG_ACTIVE is clared from qc->flags.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ qc->complete_fn() callback is invoked. If the return value of
+ the callback is not zero. Completion is short circuited and
+ ata_qc_complete() returns.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ __ata_qc_complete() is called, which does
+ <orderedlist>
+
+ <listitem>
+ <para>
+ qc->flags is cleared to zero.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ ap->active_tag and qc->tag are poisoned.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ qc->waiting is claread & completed (in that order).
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ qc is deallocated by clearing appropriate bit in ap->qactive.
+ </para>
+ </listitem>
+
+ </orderedlist>
+ </para>
+ </listitem>
+
+ </orderedlist>
+
+ <para>
+ So, it basically notifies upper layer and deallocates qc. One
+ exception is short-circuit path in #3 which is used by
+ atapi_qc_complete().
+ </para>
+ <para>
+ For all non-ATAPI commands, whether it fails or not, almost
+ the same code path is taken and very little error handling
+ takes place. A qc is completed with success status if it
+ succeeded, with failed status otherwise.
+ </para>
+ <para>
+ However, failed ATAPI commands require more handling as
+ REQUEST SENSE is needed to acquire sense data. If an ATAPI
+ command fails, ata_qc_complete() is invoked with error status,
+ which in turn invokes atapi_qc_complete() via
+ qc->complete_fn() callback.
+ </para>
+ <para>
+ This makes atapi_qc_complete() set scmd->result to
+ SAM_STAT_CHECK_CONDITION, complete the scmd and return 1. As
+ the sense data is empty but scmd->result is CHECK CONDITION,
+ SCSI midlayer will invoke EH for the scmd, and returning 1
+ makes ata_qc_complete() to return without deallocating the qc.
+ This leads us to ata_scsi_error() with partially completed qc.
+ </para>
+
+ </sect1>
+
+ <sect1><title>ata_scsi_error()</title>
+ <para>
+ ata_scsi_error() is the current hostt->eh_strategy_handler()
+ for libata. As discussed above, this will be entered in two
+ cases - timeout and ATAPI error completion. This function
+ calls low level libata driver's eng_timeout() callback, the
+ standard callback for which is ata_eng_timeout(). It checks
+ if a qc is active and calls ata_qc_timeout() on the qc if so.
+ Actual error handling occurs in ata_qc_timeout().
+ </para>
+ <para>
+ If EH is invoked for timeout, ata_qc_timeout() stops BMDMA and
+ completes the qc. Note that as we're currently in EH, we
+ cannot call scsi_done. As described in SCSI EH doc, a
+ recovered scmd should be either retried with
+ scsi_queue_insert() or finished with scsi_finish_command().
+ Here, we override qc->scsidone with scsi_finish_command() and
+ calls ata_qc_complete().
+ </para>
+ <para>
+ If EH is invoked due to a failed ATAPI qc, the qc here is
+ completed but not deallocated. The purpose of this
+ half-completion is to use the qc as place holder to make EH
+ code reach this place. This is a bit hackish, but it works.
+ </para>
+ <para>
+ Once control reaches here, the qc is deallocated by invoking
+ __ata_qc_complete() explicitly. Then, internal qc for REQUEST
+ SENSE is issued. Once sense data is acquired, scmd is
+ finished by directly invoking scsi_finish_command() on the
+ scmd. Note that as we already have completed and deallocated
+ the qc which was associated with the scmd, we don't need
+ to/cannot call ata_qc_complete() again.
+ </para>
+
+ </sect1>
+
+ <sect1><title>Problems with the current EH</title>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ Error representation is too crude. Currently any and all
+ error conditions are represented with ATA STATUS and ERROR
+ registers. Errors which aren't ATA device errors are treated
+ as ATA device errors by setting ATA_ERR bit. Better error
+ descriptor which can properly represent ATA and other
+ errors/exceptions is needed.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ When handling timeouts, no action is taken to make device
+ forget about the timed out command and ready for new commands.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ EH handling via ata_scsi_error() is not properly protected
+ from usual command processing. On EH entrance, the device is
+ not in quiescent state. Timed out commands may succeed or
+ fail any time. pio_task and atapi_task may still be running.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Too weak error recovery. Devices / controllers causing HSM
+ mismatch errors and other errors quite often require reset to
+ return to known state. Also, advanced error handling is
+ necessary to support features like NCQ and hotplug.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ ATA errors are directly handled in the interrupt handler and
+ PIO errors in pio_task. This is problematic for advanced
+ error handling for the following reasons.
+ </para>
+ <para>
+ First, advanced error handling often requires context and
+ internal qc execution.
+ </para>
+ <para>
+ Second, even a simple failure (say, CRC error) needs
+ information gathering and could trigger complex error handling
+ (say, resetting & reconfiguring). Having multiple code
+ paths to gather information, enter EH and trigger actions
+ makes life painful.
+ </para>
+ <para>
+ Third, scattered EH code makes implementing low level drivers
+ difficult. Low level drivers override libata callbacks. If
+ EH is scattered over several places, each affected callbacks
+ should perform its part of error handling. This can be error
+ prone and painful.
+ </para>
+ </listitem>
+
+ </itemizedlist>
+ </sect1>
+ </chapter>
+
<chapter id="libataExt">
<title>libata Library</title>
!Edrivers/scsi/libata-core.c
@@ -431,6 +787,722 @@
!Idrivers/scsi/libata-scsi.c
</chapter>
+ <chapter id="ataExceptions">
+ <title>ATA errors & exceptions</title>
+
+ <para>
+ This chapter tries to identify what error/exception conditions exist
+ for ATA/ATAPI devices and describe how they should be handled in
+ implementation-neutral way.
+ </para>
+
+ <para>
+ The term 'error' is used to describe conditions where either an
+ explicit error condition is reported from device or a command has
+ timed out.
+ </para>
+
+ <para>
+ The term 'exception' is either used to describe exceptional
+ conditions which are not errors (say, power or hotplug events), or
+ to describe both errors and non-error exceptional conditions. Where
+ explicit distinction between error and exception is necessary, the
+ term 'non-error exception' is used.
+ </para>
+
+ <sect1 id="excat">
+ <title>Exception categories</title>
+ <para>
+ Exceptions are described primarily with respect to legacy
+ taskfile + bus master IDE interface. If a controller provides
+ other better mechanism for error reporting, mapping those into
+ categories described below shouldn't be difficult.
+ </para>
+
+ <para>
+ In the following sections, two recovery actions - reset and
+ reconfiguring transport - are mentioned. These are described
+ further in <xref linkend="exrec"/>.
+ </para>
+
+ <sect2 id="excatHSMviolation">
+ <title>HSM violation</title>
+ <para>
+ This error is indicated when STATUS value doesn't match HSM
+ requirement during issuing or excution any ATA/ATAPI command.
+ </para>
+
+ <itemizedlist>
+ <title>Examples</title>
+
+ <listitem>
+ <para>
+ ATA_STATUS doesn't contain !BSY && DRDY && !DRQ while trying
+ to issue a command.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ !BSY && !DRQ during PIO data transfer.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ DRQ on command completion.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ !BSY && ERR after CDB tranfer starts but before the
+ last byte of CDB is transferred. ATA/ATAPI standard states
+ that "The device shall not terminate the PACKET command
+ with an error before the last byte of the command packet has
+ been written" in the error outputs description of PACKET
+ command and the state diagram doesn't include such
+ transitions.
+ </para>
+ </listitem>
+
+ </itemizedlist>
+
+ <para>
+ In these cases, HSM is violated and not much information
+ regarding the error can be acquired from STATUS or ERROR
+ register. IOW, this error can be anything - driver bug,
+ faulty device, controller and/or cable.
+ </para>
+
+ <para>
+ As HSM is violated, reset is necessary to restore known state.
+ Reconfiguring transport for lower speed might be helpful too
+ as transmission errors sometimes cause this kind of errors.
+ </para>
+ </sect2>
+
+ <sect2 id="excatDevErr">
+ <title>ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)</title>
+
+ <para>
+ These are errors detected and reported by ATA/ATAPI devices
+ indicating device problems. For this type of errors, STATUS
+ and ERROR register values are valid and describe error
+ condition. Note that some of ATA bus errors are detected by
+ ATA/ATAPI devices and reported using the same mechanism as
+ device errors. Those cases are described later in this
+ section.
+ </para>
+
+ <para>
+ For ATA commands, this type of errors are indicated by !BSY
+ && ERR during command execution and on completion.
+ </para>
+
+ <para>For ATAPI commands,</para>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ !BSY && ERR && ABRT right after issuing PACKET
+ indicates that PACKET command is not supported and falls in
+ this category.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ !BSY && ERR(==CHK) && !ABRT after the last
+ byte of CDB is transferred indicates CHECK CONDITION and
+ doesn't fall in this category.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ !BSY && ERR(==CHK) && ABRT after the last byte
+ of CDB is transferred *probably* indicates CHECK CONDITION and
+ doesn't fall in this category.
+ </para>
+ </listitem>
+
+ </itemizedlist>
+
+ <para>
+ Of errors detected as above, the followings are not ATA/ATAPI
+ device errors but ATA bus errors and should be handled
+ according to <xref linkend="excatATAbusErr"/>.
+ </para>
+
+ <variablelist>
+
+ <varlistentry>
+ <term>CRC error during data transfer</term>
+ <listitem>
+ <para>
+ This is indicated by ICRC bit in the ERROR register and
+ means that corruption occurred during data transfer. Upto
+ ATA/ATAPI-7, the standard specifies that this bit is only
+ applicable to UDMA transfers but ATA/ATAPI-8 draft revision
+ 1f says that the bit may be applicable to multiword DMA and
+ PIO.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>ABRT error during data transfer or on completion</term>
+ <listitem>
+ <para>
+ Upto ATA/ATAPI-7, the standard specifies that ABRT could be
+ set on ICRC errors and on cases where a device is not able
+ to complete a command. Combined with the fact that MWDMA
+ and PIO transfer errors aren't allowed to use ICRC bit upto
+ ATA/ATAPI-7, it seems to imply that ABRT bit alone could
+ indicate tranfer errors.
+ </para>
+ <para>
+ However, ATA/ATAPI-8 draft revision 1f removes the part
+ that ICRC errors can turn on ABRT. So, this is kind of
+ gray area. Some heuristics are needed here.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+
+ <para>
+ ATA/ATAPI device errors can be further categorized as follows.
+ </para>
+
+ <variablelist>
+
+ <varlistentry>
+ <term>Media errors</term>
+ <listitem>
+ <para>
+ This is indicated by UNC bit in the ERROR register. ATA
+ devices reports UNC error only after certain number of
+ retries cannot recover the data, so there's nothing much
+ else to do other than notifying upper layer.
+ </para>
+ <para>
+ READ and WRITE commands report CHS or LBA of the first
+ failed sector but ATA/ATAPI standard specifies that the
+ amount of transferred data on error completion is
+ indeterminate, so we cannot assume that sectors preceding
+ the failed sector have been transferred and thus cannot
+ complete those sectors successfully as SCSI does.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Media changed / media change requested error</term>
+ <listitem>
+ <para>
+ <<TODO: fill here>>
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>Address error</term>
+ <listitem>
+ <para>
+ This is indicated by IDNF bit in the ERROR register.
+ Report to upper layer.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>Other errors</term>
+ <listitem>
+ <para>
+ This can be invalid command or parameter indicated by ABRT
+ ERROR bit or some other error condition. Note that ABRT
+ bit can indicate a lot of things including ICRC and Address
+ errors. Heuristics needed.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+
+ <para>
+ Depending on commands, not all STATUS/ERROR bits are
+ applicable. These non-applicable bits are marked with
+ "na" in the output descriptions but upto ATA/ATAPI-7
+ no definition of "na" can be found. However,
+ ATA/ATAPI-8 draft revision 1f describes "N/A" as
+ follows.
+ </para>
+
+ <blockquote>
+ <variablelist>
+ <varlistentry><term>3.2.3.3a N/A</term>
+ <listitem>
+ <para>
+ A keyword the indicates a field has no defined value in
+ this standard and should not be checked by the host or
+ device. N/A fields should be cleared to zero.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </blockquote>
+
+ <para>
+ So, it seems reasonable to assume that "na" bits are
+ cleared to zero by devices and thus need no explicit masking.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatATAPIcc">
+ <title>ATAPI device CHECK CONDITION</title>
+
+ <para>
+ ATAPI device CHECK CONDITION error is indicated by set CHK bit
+ (ERR bit) in the STATUS register after the last byte of CDB is
+ transferred for a PACKET command. For this kind of errors,
+ sense data should be acquired to gather information regarding
+ the errors. REQUEST SENSE packet command should be used to
+ acquire sense data.
+ </para>
+
+ <para>
+ Once sense data is acquired, this type of errors can be
+ handled similary to other SCSI errors. Note that sense data
+ may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR
+ && ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such
+ cases, the error should be considered as an ATA bus error and
+ handled according to <xref linkend="excatATAbusErr"/>.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatNCQerr">
+ <title>ATA device error (NCQ)</title>
+
+ <para>
+ NCQ command error is indicated by cleared BSY and set ERR bit
+ during NCQ command phase (one or more NCQ commands
+ outstanding). Although STATUS and ERROR registers will
+ contain valid values describing the error, READ LOG EXT is
+ required to clear the error condition, determine which command
+ has failed and acquire more information.
+ </para>
+
+ <para>
+ READ LOG EXT Log Page 10h reports which tag has failed and
+ taskfile register values describing the error. With this
+ information the failed command can be handled as a normal ATA
+ command error as in <xref linkend="excatDevErr"/> and all
+ other in-flight commands must be retried. Note that this
+ retry should not be counted - it's likely that commands
+ retried this way would have completed normally if it were not
+ for the failed command.
+ </para>
+
+ <para>
+ Note that ATA bus errors can be reported as ATA device NCQ
+ errors. This should be handled as described in <xref
+ linkend="excatATAbusErr"/>.
+ </para>
+
+ <para>
+ If READ LOG EXT Log Page 10h fails or reports NQ, we're
+ thoroughly screwed. This condition should be treated
+ according to <xref linkend="excatHSMviolation"/>.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatATAbusErr">
+ <title>ATA bus error</title>
+
+ <para>
+ ATA bus error means that data corruption occurred during
+ transmission over ATA bus (SATA or PATA). This type of errors
+ can be indicated by
+ </para>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ ICRC or ABRT error as described in <xref linkend="excatDevErr"/>.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Controller-specific error completion with error information
+ indicating transmission error.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ On some controllers, command timeout. In this case, there may
+ be a mechanism to determine that the timeout is due to
+ transmission error.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Unknown/random errors, timeouts and all sorts of weirdities.
+ </para>
+ </listitem>
+
+ </itemizedlist>
+
+ <para>
+ As described above, transmission errors can cause wide variety
+ of symptoms ranging from device ICRC error to random device
+ lockup, and, for many cases, there is no way to tell if an
+ error condition is due to transmission error or not;
+ therefore, it's necessary to employ some kind of heuristic
+ when dealing with errors and timeouts. For example,
+ encountering repetitive ABRT errors for known supported
+ command is likely to indicate ATA bus error.
+ </para>
+
+ <para>
+ Once it's determined that ATA bus errors have possibly
+ occurred, lowering ATA bus transmission speed is one of
+ actions which may alleviate the problem. See <xref
+ linkend="exrecReconf"/> for more information.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatPCIbusErr">
+ <title>PCI bus error</title>
+
+ <para>
+ Data corruption or other failures during transmission over PCI
+ (or other system bus). For standard BMDMA, this is indicated
+ by Error bit in the BMDMA Status register. This type of
+ errors must be logged as it indicates something is very wrong
+ with the system. Resetting host controller is recommended.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatLateCompletion">
+ <title>Late completion</title>
+
+ <para>
+ This occurs when timeout occurs and the timeout handler finds
+ out that the timed out command has completed successfully or
+ with error. This is usually caused by lost interrupts. This
+ type of errors must be logged. Resetting host controller is
+ recommended.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatUnknown">
+ <title>Unknown error (timeout)</title>
+
+ <para>
+ This is when timeout occurs and the command is still
+ processing or the host and device are in unknown state. When
+ this occurs, HSM could be in any valid or invalid state. To
+ bring the device to known state and make it forget about the
+ timed out command, resetting is necessary. The timed out
+ command may be retried.
+ </para>
+
+ <para>
+ Timeouts can also be caused by transmission errors. Refer to
+ <xref linkend="excatATAbusErr"/> for more details.
+ </para>
+
+ </sect2>
+
+ <sect2 id="excatHoplugPM">
+ <title>Hotplug and power management exceptions</title>
+
+ <para>
+ <<TODO: fill here>>
+ </para>
+
+ </sect2>
+
+ </sect1>
+
+ <sect1 id="exrec">
+ <title>EH recovery actions</title>
+
+ <para>
+ This section discusses several important recovery actions.
+ </para>
+
+ <sect2 id="exrecClr">
+ <title>Clearing error condition</title>
+
+ <para>
+ Many controllers require its error registers to be cleared by
+ error handler. Different controllers may have different
+ requirements.
+ </para>
+
+ <para>
+ For SATA, it's strongly recommended to clear at least SError
+ register during error handling.
+ </para>
+ </sect2>
+
+ <sect2 id="exrecRst">
+ <title>Reset</title>
+
+ <para>
+ During EH, resetting is necessary in the following cases.
+ </para>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ HSM is in unknown or invalid state
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ HBA is in unknown or invalid state
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ EH needs to make HBA/device forget about in-flight commands
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ HBA/device behaves weirdly
+ </para>
+ </listitem>
+
+ </itemizedlist>
+
+ <para>
+ Resetting during EH might be a good idea regardless of error
+ condition to improve EH robustness. Whether to reset both or
+ either one of HBA and device depends on situation but the
+ following scheme is recommended.
+ </para>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ When it's known that HBA is in ready state but ATA/ATAPI
+ device in in unknown state, reset only device.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ If HBA is in unknown state, reset both HBA and device.
+ </para>
+ </listitem>
+
+ </itemizedlist>
+
+ <para>
+ HBA resetting is implementation specific. For a controller
+ complying to taskfile/BMDMA PCI IDE, stopping active DMA
+ transaction may be sufficient iff BMDMA state is the only HBA
+ context. But even mostly taskfile/BMDMA PCI IDE complying
+ controllers may have implementation specific requirements and
+ mechanism to reset themselves. This must be addressed by
+ specific drivers.
+ </para>
+
+ <para>
+ OTOH, ATA/ATAPI standard describes in detail ways to reset
+ ATA/ATAPI devices.
+ </para>
+
+ <variablelist>
+
+ <varlistentry><term>PATA hardware reset</term>
+ <listitem>
+ <para>
+ This is hardware initiated device reset signalled with
+ asserted PATA RESET- signal. There is no standard way to
+ initiate hardware reset from software although some
+ hardware provides registers that allow driver to directly
+ tweak the RESET- signal.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>Software reset</term>
+ <listitem>
+ <para>
+ This is achieved by turning CONTROL SRST bit on for at
+ least 5us. Both PATA and SATA support it but, in case of
+ SATA, this may require controller-specific support as the
+ second Register FIS to clear SRST should be transmitted
+ while BSY bit is still set. Note that on PATA, this resets
+ both master and slave devices on a channel.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>EXECUTE DEVICE DIAGNOSTIC command</term>
+ <listitem>
+ <para>
+ Although ATA/ATAPI standard doesn't describe exactly, EDD
+ implies some level of resetting, possibly similar level
+ with software reset. Host-side EDD protocol can be handled
+ with normal command processing and most SATA controllers
+ should be able to handle EDD's just like other commands.
+ As in software reset, EDD affects both devices on a PATA
+ bus.
+ </para>
+ <para>
+ Although EDD does reset devices, this doesn't suit error
+ handling as EDD cannot be issued while BSY is set and it's
+ unclear how it will act when device is in unknown/weird
+ state.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>ATAPI DEVICE RESET command</term>
+ <listitem>
+ <para>
+ This is very similar to software reset except that reset
+ can be restricted to the selected device without affecting
+ the other device sharing the cable.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry><term>SATA phy reset</term>
+ <listitem>
+ <para>
+ This is the preferred way of resetting a SATA device. In
+ effect, it's identical to PATA hardware reset. Note that
+ this can be done with the standard SCR Control register.
+ As such, it's usually easier to implement than software
+ reset.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+
+ <para>
+ One more thing to consider when resetting devices is that
+ resetting clears certain configuration parameters and they
+ need to be set to their previous or newly adjusted values
+ after reset.
+ </para>
+
+ <para>
+ Parameters affected are.
+ </para>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ CHS set up with INITIALIZE DEVICE PARAMETERS (seldomly used)
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Parameters set with SET FEATURES including transfer mode setting
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Block count set with SET MULTIPLE MODE
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Other parameters (SET MAX, MEDIA LOCK...)
+ </para>
+ </listitem>
+
+ </itemizedlist>
+
+ <para>
+ ATA/ATAPI standard specifies that some parameters must be
+ maintained across hardware or software reset, but doesn't
+ strictly specify all of them. Always reconfiguring needed
+ parameters after reset is required for robustness. Note that
+ this also applies when resuming from deep sleep (power-off).
+ </para>
+
+ <para>
+ Also, ATA/ATAPI standard requires that IDENTIFY DEVICE /
+ IDENTIFY PACKET DEVICE is issued after any configuration
+ parameter is updated or a hardware reset and the result used
+ for further operation. OS driver is required to implement
+ revalidation mechanism to support this.
+ </para>
+
+ </sect2>
+
+ <sect2 id="exrecReconf">
+ <title>Reconfigure transport</title>
+
+ <para>
+ For both PATA and SATA, a lot of corners are cut for cheap
+ connectors, cables or controllers and it's quite common to see
+ high transmission error rate. This can be mitigated by
+ lowering transmission speed.
+ </para>
+
+ <para>
+ The following is a possible scheme Jeff Garzik suggested.
+ </para>
+
+ <blockquote>
+ <para>
+ If more than $N (3?) transmission errors happen in 15 minutes,
+ </para>
+ <itemizedlist>
+ <listitem>
+ <para>
+ if SATA, decrease SATA PHY speed. if speed cannot be decreased,
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ decrease UDMA xfer speed. if at UDMA0, switch to PIO4,
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ decrease PIO xfer speed. if at PIO3, complain, but continue
+ </para>
+ </listitem>
+ </itemizedlist>
+ </blockquote>
+
+ </sect2>
+
+ </sect1>
+
+ </chapter>
+
<chapter id="PiixInt">
<title>ata_piix Internals</title>
!Idrivers/scsi/ata_piix.c
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 3ee9b8b..9c9f162 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -489,11 +489,11 @@
If unsure, say N.
-config SCSI_SATA_PROMISE
- tristate "Promise SATA TX2/TX4 support"
+config SCSI_PDC_ADMA
+ tristate "Pacific Digital ADMA support"
depends on SCSI_SATA && PCI
help
- This option enables support for Promise Serial ATA TX2/TX4.
+ This option enables support for Pacific Digital ADMA controllers
If unsure, say N.
@@ -505,6 +505,14 @@
If unsure, say N.
+config SCSI_SATA_PROMISE
+ tristate "Promise SATA TX2/TX4 support"
+ depends on SCSI_SATA && PCI
+ help
+ This option enables support for Promise Serial ATA TX2/TX4.
+
+ If unsure, say N.
+
config SCSI_SATA_SX4
tristate "Promise SATA SX4 support"
depends on SCSI_SATA && PCI && EXPERIMENTAL
@@ -521,6 +529,14 @@
If unsure, say N.
+config SCSI_SATA_SIL24
+ tristate "Silicon Image 3124/3132 SATA support"
+ depends on SCSI_SATA && PCI && EXPERIMENTAL
+ help
+ This option enables support for Silicon Image 3124/3132 Serial ATA.
+
+ If unsure, say N.
+
config SCSI_SATA_SIS
tristate "SiS 964/180 SATA support"
depends on SCSI_SATA && PCI && EXPERIMENTAL
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 48529d1..2d44398 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -130,6 +130,7 @@
obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o
obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o
+obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o
obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o
obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o
obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o
@@ -137,6 +138,7 @@
obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o
obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o
obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o
+obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o
obj-$(CONFIG_ARM) += arm/
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index c2c8fa8..fe8187d 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -216,7 +216,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations ahci_ops = {
+static const struct ata_port_operations ahci_ops = {
.port_disable = ata_port_disable,
.check_status = ahci_check_status,
@@ -407,7 +407,7 @@
return 0xffffffffU;
}
- return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+ return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -425,7 +425,7 @@
return;
}
- writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+ writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void ahci_phy_reset(struct ata_port *ap)
@@ -453,14 +453,14 @@
static u8 ahci_check_status(struct ata_port *ap)
{
- void *mmio = (void *) ap->ioaddr.cmd_addr;
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr;
return readl(mmio + PORT_TFDATA) & 0xFF;
}
static u8 ahci_check_err(struct ata_port *ap)
{
- void *mmio = (void *) ap->ioaddr.cmd_addr;
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr;
return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF;
}
@@ -672,17 +672,36 @@
for (i = 0; i < host_set->n_ports; i++) {
struct ata_port *ap;
- u32 tmp;
- VPRINTK("port %u\n", i);
+ if (!(irq_stat & (1 << i)))
+ continue;
+
ap = host_set->ports[i];
- tmp = irq_stat & (1 << i);
- if (tmp && ap) {
+ if (ap) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (ahci_host_intr(ap, qc))
- irq_ack |= (1 << i);
+ if (!ahci_host_intr(ap, qc))
+ if (ata_ratelimit()) {
+ struct pci_dev *pdev =
+ to_pci_dev(ap->host_set->dev);
+ printk(KERN_WARNING
+ "ahci(%s): unhandled interrupt on port %u\n",
+ pci_name(pdev), i);
+ }
+
+ VPRINTK("port %u\n", i);
+ } else {
+ VPRINTK("port %u (no irq)\n", i);
+ if (ata_ratelimit()) {
+ struct pci_dev *pdev =
+ to_pci_dev(ap->host_set->dev);
+ printk(KERN_WARNING
+ "ahci(%s): interrupt on disabled port %u\n",
+ pci_name(pdev), i);
+ }
}
+
+ irq_ack |= (1 << i);
}
if (irq_ack) {
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index d71cef7..be02147 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -147,7 +147,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations piix_pata_ops = {
+static const struct ata_port_operations piix_pata_ops = {
.port_disable = ata_port_disable,
.set_piomode = piix_set_piomode,
.set_dmamode = piix_set_dmamode,
@@ -177,7 +177,7 @@
.host_stop = ata_host_stop,
};
-static struct ata_port_operations piix_sata_ops = {
+static const struct ata_port_operations piix_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index e5b0199..f53d7b8 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -48,6 +48,7 @@
#include <linux/completion.h>
#include <linux/suspend.h>
#include <linux/workqueue.h>
+#include <linux/jiffies.h>
#include <scsi/scsi.h>
#include "scsi.h"
#include "scsi_priv.h"
@@ -62,14 +63,15 @@
static unsigned int ata_busy_sleep (struct ata_port *ap,
unsigned long tmout_pat,
unsigned long tmout);
+static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev);
+static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev);
static void ata_set_mode(struct ata_port *ap);
static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev);
-static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift);
+static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift);
static int fgb(u32 bitmap);
-static int ata_choose_xfer_mode(struct ata_port *ap,
+static int ata_choose_xfer_mode(const struct ata_port *ap,
u8 *xfer_mode_out,
unsigned int *xfer_shift_out);
-static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat);
static void __ata_qc_complete(struct ata_queued_cmd *qc);
static unsigned int ata_unique_id = 1;
@@ -85,7 +87,7 @@
MODULE_VERSION(DRV_VERSION);
/**
- * ata_tf_load - send taskfile registers to host controller
+ * ata_tf_load_pio - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
@@ -95,7 +97,7 @@
* Inherited from caller.
*/
-static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -153,7 +155,7 @@
* Inherited from caller.
*/
-static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -222,7 +224,7 @@
* LOCKING:
* Inherited from caller.
*/
-void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
ata_tf_load_mmio(ap, tf);
@@ -242,7 +244,7 @@
* spin_lock_irqsave(host_set lock)
*/
-static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf)
{
DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
@@ -263,7 +265,7 @@
* spin_lock_irqsave(host_set lock)
*/
-static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
@@ -283,7 +285,7 @@
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
ata_exec_command_mmio(ap, tf);
@@ -303,7 +305,7 @@
* Obtains host_set lock.
*/
-static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf)
+static inline void ata_exec(struct ata_port *ap, const struct ata_taskfile *tf)
{
unsigned long flags;
@@ -326,7 +328,7 @@
* Obtains host_set lock.
*/
-static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_tf_to_host(struct ata_port *ap, const struct ata_taskfile *tf)
{
ap->ops->tf_load(ap, tf);
@@ -346,7 +348,7 @@
* spin_lock_irqsave(host_set lock)
*/
-void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf)
{
ap->ops->tf_load(ap, tf);
ap->ops->exec_command(ap, tf);
@@ -556,7 +558,7 @@
* Inherited from caller.
*/
-void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp)
+void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp)
{
fis[0] = 0x27; /* Register - Host to Device FIS */
fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number,
@@ -597,7 +599,7 @@
* Inherited from caller.
*/
-void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf)
+void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
{
tf->command = fis[2]; /* status */
tf->feature = fis[3]; /* error */
@@ -615,79 +617,53 @@
tf->hob_nsect = fis[13];
}
-/**
- * ata_prot_to_cmd - determine which read/write opcodes to use
- * @protocol: ATA_PROT_xxx taskfile protocol
- * @lba48: true is lba48 is present
- *
- * Given necessary input, determine which read/write commands
- * to use to transfer data.
- *
- * LOCKING:
- * None.
- */
-static int ata_prot_to_cmd(int protocol, int lba48)
-{
- int rcmd = 0, wcmd = 0;
-
- switch (protocol) {
- case ATA_PROT_PIO:
- if (lba48) {
- rcmd = ATA_CMD_PIO_READ_EXT;
- wcmd = ATA_CMD_PIO_WRITE_EXT;
- } else {
- rcmd = ATA_CMD_PIO_READ;
- wcmd = ATA_CMD_PIO_WRITE;
- }
- break;
-
- case ATA_PROT_DMA:
- if (lba48) {
- rcmd = ATA_CMD_READ_EXT;
- wcmd = ATA_CMD_WRITE_EXT;
- } else {
- rcmd = ATA_CMD_READ;
- wcmd = ATA_CMD_WRITE;
- }
- break;
-
- default:
- return -1;
- }
-
- return rcmd | (wcmd << 8);
-}
+static const u8 ata_rw_cmds[] = {
+ /* pio multi */
+ ATA_CMD_READ_MULTI,
+ ATA_CMD_WRITE_MULTI,
+ ATA_CMD_READ_MULTI_EXT,
+ ATA_CMD_WRITE_MULTI_EXT,
+ /* pio */
+ ATA_CMD_PIO_READ,
+ ATA_CMD_PIO_WRITE,
+ ATA_CMD_PIO_READ_EXT,
+ ATA_CMD_PIO_WRITE_EXT,
+ /* dma */
+ ATA_CMD_READ,
+ ATA_CMD_WRITE,
+ ATA_CMD_READ_EXT,
+ ATA_CMD_WRITE_EXT
+};
/**
- * ata_dev_set_protocol - set taskfile protocol and r/w commands
- * @dev: device to examine and configure
+ * ata_rwcmd_protocol - set taskfile r/w commands and protocol
+ * @qc: command to examine and configure
*
- * Examine the device configuration, after we have
- * read the identify-device page and configured the
- * data transfer mode. Set internal state related to
- * the ATA taskfile protocol (pio, pio mult, dma, etc.)
- * and calculate the proper read/write commands to use.
+ * Examine the device configuration and tf->flags to calculate
+ * the proper read/write commands and protocol to use.
*
* LOCKING:
* caller.
*/
-static void ata_dev_set_protocol(struct ata_device *dev)
+void ata_rwcmd_protocol(struct ata_queued_cmd *qc)
{
- int pio = (dev->flags & ATA_DFLAG_PIO);
- int lba48 = (dev->flags & ATA_DFLAG_LBA48);
- int proto, cmd;
+ struct ata_taskfile *tf = &qc->tf;
+ struct ata_device *dev = qc->dev;
- if (pio)
- proto = dev->xfer_protocol = ATA_PROT_PIO;
- else
- proto = dev->xfer_protocol = ATA_PROT_DMA;
+ int index, lba48, write;
+
+ lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
+ write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
- cmd = ata_prot_to_cmd(proto, lba48);
- if (cmd < 0)
- BUG();
+ if (dev->flags & ATA_DFLAG_PIO) {
+ tf->protocol = ATA_PROT_PIO;
+ index = dev->multi_count ? 0 : 4;
+ } else {
+ tf->protocol = ATA_PROT_DMA;
+ index = 8;
+ }
- dev->read_cmd = cmd & 0xff;
- dev->write_cmd = (cmd >> 8) & 0xff;
+ tf->command = ata_rw_cmds[index + lba48 + write];
}
static const char * xfer_mode_str[] = {
@@ -869,7 +845,7 @@
* the event of failure.
*/
-unsigned int ata_dev_classify(struct ata_taskfile *tf)
+unsigned int ata_dev_classify(const struct ata_taskfile *tf)
{
/* Apple's open source Darwin code hints that some devices only
* put a proper signature into the LBA mid/high registers,
@@ -961,7 +937,7 @@
* caller.
*/
-void ata_dev_id_string(u16 *id, unsigned char *s,
+void ata_dev_id_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len)
{
unsigned int c;
@@ -1078,7 +1054,7 @@
* caller.
*/
-static inline void ata_dump_id(struct ata_device *dev)
+static inline void ata_dump_id(const struct ata_device *dev)
{
DPRINTK("49==0x%04x "
"53==0x%04x "
@@ -1106,6 +1082,31 @@
dev->id[93]);
}
+/*
+ * Compute the PIO modes available for this device. This is not as
+ * trivial as it seems if we must consider early devices correctly.
+ *
+ * FIXME: pre IDE drive timing (do we care ?).
+ */
+
+static unsigned int ata_pio_modes(const struct ata_device *adev)
+{
+ u16 modes;
+
+ /* Usual case. Word 53 indicates word 88 is valid */
+ if (adev->id[ATA_ID_FIELD_VALID] & (1 << 2)) {
+ modes = adev->id[ATA_ID_PIO_MODES] & 0x03;
+ modes <<= 3;
+ modes |= 0x7;
+ return modes;
+ }
+
+ /* If word 88 isn't valid then Word 51 holds the PIO timing number
+ for the maximum. Turn it into a mask and return it */
+ modes = (2 << (adev->id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ;
+ return modes;
+}
+
/**
* ata_dev_identify - obtain IDENTIFY x DEVICE page
* @ap: port on which device we wish to probe resides
@@ -1131,7 +1132,7 @@
static void ata_dev_identify(struct ata_port *ap, unsigned int device)
{
struct ata_device *dev = &ap->device[device];
- unsigned int i;
+ unsigned int major_version;
u16 tmp;
unsigned long xfer_modes;
u8 status;
@@ -1229,9 +1230,9 @@
* common ATA, ATAPI feature tests
*/
- /* we require LBA and DMA support (bits 8 & 9 of word 49) */
- if (!ata_id_has_dma(dev->id) || !ata_id_has_lba(dev->id)) {
- printk(KERN_DEBUG "ata%u: no dma/lba\n", ap->id);
+ /* we require DMA support (bits 8 of word 49) */
+ if (!ata_id_has_dma(dev->id)) {
+ printk(KERN_DEBUG "ata%u: no dma\n", ap->id);
goto err_out_nosup;
}
@@ -1239,10 +1240,8 @@
xfer_modes = dev->id[ATA_ID_UDMA_MODES];
if (!xfer_modes)
xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA;
- if (!xfer_modes) {
- xfer_modes = (dev->id[ATA_ID_PIO_MODES]) << (ATA_SHIFT_PIO + 3);
- xfer_modes |= (0x7 << ATA_SHIFT_PIO);
- }
+ if (!xfer_modes)
+ xfer_modes = ata_pio_modes(dev);
ata_dump_id(dev);
@@ -1251,32 +1250,75 @@
if (!ata_id_is_ata(dev->id)) /* sanity check */
goto err_out_nosup;
+ /* get major version */
tmp = dev->id[ATA_ID_MAJOR_VER];
- for (i = 14; i >= 1; i--)
- if (tmp & (1 << i))
+ for (major_version = 14; major_version >= 1; major_version--)
+ if (tmp & (1 << major_version))
break;
- /* we require at least ATA-3 */
- if (i < 3) {
- printk(KERN_DEBUG "ata%u: no ATA-3\n", ap->id);
- goto err_out_nosup;
+ /*
+ * The exact sequence expected by certain pre-ATA4 drives is:
+ * SRST RESET
+ * IDENTIFY
+ * INITIALIZE DEVICE PARAMETERS
+ * anything else..
+ * Some drives were very specific about that exact sequence.
+ */
+ if (major_version < 4 || (!ata_id_has_lba(dev->id))) {
+ ata_dev_init_params(ap, dev);
+
+ /* current CHS translation info (id[53-58]) might be
+ * changed. reread the identify device info.
+ */
+ ata_dev_reread_id(ap, dev);
}
- if (ata_id_has_lba48(dev->id)) {
- dev->flags |= ATA_DFLAG_LBA48;
- dev->n_sectors = ata_id_u64(dev->id, 100);
- } else {
- dev->n_sectors = ata_id_u32(dev->id, 60);
+ if (ata_id_has_lba(dev->id)) {
+ dev->flags |= ATA_DFLAG_LBA;
+
+ if (ata_id_has_lba48(dev->id)) {
+ dev->flags |= ATA_DFLAG_LBA48;
+ dev->n_sectors = ata_id_u64(dev->id, 100);
+ } else {
+ dev->n_sectors = ata_id_u32(dev->id, 60);
+ }
+
+ /* print device info to dmesg */
+ printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n",
+ ap->id, device,
+ major_version,
+ ata_mode_string(xfer_modes),
+ (unsigned long long)dev->n_sectors,
+ dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA");
+ } else {
+ /* CHS */
+
+ /* Default translation */
+ dev->cylinders = dev->id[1];
+ dev->heads = dev->id[3];
+ dev->sectors = dev->id[6];
+ dev->n_sectors = dev->cylinders * dev->heads * dev->sectors;
+
+ if (ata_id_current_chs_valid(dev->id)) {
+ /* Current CHS translation is valid. */
+ dev->cylinders = dev->id[54];
+ dev->heads = dev->id[55];
+ dev->sectors = dev->id[56];
+
+ dev->n_sectors = ata_id_u32(dev->id, 57);
+ }
+
+ /* print device info to dmesg */
+ printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n",
+ ap->id, device,
+ major_version,
+ ata_mode_string(xfer_modes),
+ (unsigned long long)dev->n_sectors,
+ (int)dev->cylinders, (int)dev->heads, (int)dev->sectors);
+
}
ap->host->max_cmd_len = 16;
-
- /* print device info to dmesg */
- printk(KERN_INFO "ata%u: dev %u ATA, max %s, %Lu sectors:%s\n",
- ap->id, device,
- ata_mode_string(xfer_modes),
- (unsigned long long)dev->n_sectors,
- dev->flags & ATA_DFLAG_LBA48 ? " lba48" : "");
}
/* ATAPI-specific feature tests */
@@ -1310,7 +1352,7 @@
}
-static inline u8 ata_dev_knobble(struct ata_port *ap)
+static inline u8 ata_dev_knobble(const struct ata_port *ap)
{
return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id)));
}
@@ -1496,7 +1538,153 @@
ap->flags |= ATA_FLAG_PORT_DISABLED;
}
-static struct {
+/*
+ * This mode timing computation functionality is ported over from
+ * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
+ */
+/*
+ * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
+ * These were taken from ATA/ATAPI-6 standard, rev 0a, except
+ * for PIO 5, which is a nonstandard extension and UDMA6, which
+ * is currently supported only by Maxtor drives.
+ */
+
+static const struct ata_timing ata_timing[] = {
+
+ { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
+ { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
+ { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
+ { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
+
+ { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
+ { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
+ { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
+
+/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
+
+ { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
+ { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
+ { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
+
+ { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
+ { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
+ { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
+
+/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */
+ { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
+ { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
+
+ { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
+ { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
+ { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
+
+/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
+
+ { 0xFF }
+};
+
+#define ENOUGH(v,unit) (((v)-1)/(unit)+1)
+#define EZ(v,unit) ((v)?ENOUGH(v,unit):0)
+
+static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
+{
+ q->setup = EZ(t->setup * 1000, T);
+ q->act8b = EZ(t->act8b * 1000, T);
+ q->rec8b = EZ(t->rec8b * 1000, T);
+ q->cyc8b = EZ(t->cyc8b * 1000, T);
+ q->active = EZ(t->active * 1000, T);
+ q->recover = EZ(t->recover * 1000, T);
+ q->cycle = EZ(t->cycle * 1000, T);
+ q->udma = EZ(t->udma * 1000, UT);
+}
+
+void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
+ struct ata_timing *m, unsigned int what)
+{
+ if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup);
+ if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b);
+ if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b);
+ if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b);
+ if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active);
+ if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
+ if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle);
+ if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma);
+}
+
+static const struct ata_timing* ata_timing_find_mode(unsigned short speed)
+{
+ const struct ata_timing *t;
+
+ for (t = ata_timing; t->mode != speed; t++)
+ if (t->mode == 0xFF)
+ return NULL;
+ return t;
+}
+
+int ata_timing_compute(struct ata_device *adev, unsigned short speed,
+ struct ata_timing *t, int T, int UT)
+{
+ const struct ata_timing *s;
+ struct ata_timing p;
+
+ /*
+ * Find the mode.
+ */
+
+ if (!(s = ata_timing_find_mode(speed)))
+ return -EINVAL;
+
+ /*
+ * If the drive is an EIDE drive, it can tell us it needs extended
+ * PIO/MW_DMA cycle timing.
+ */
+
+ if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
+ memset(&p, 0, sizeof(p));
+ if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
+ if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO];
+ else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY];
+ } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) {
+ p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN];
+ }
+ ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
+ }
+
+ /*
+ * Convert the timing to bus clock counts.
+ */
+
+ ata_timing_quantize(s, t, T, UT);
+
+ /*
+ * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T
+ * and some other commands. We have to ensure that the DMA cycle timing is
+ * slower/equal than the fastest PIO timing.
+ */
+
+ if (speed > XFER_PIO_4) {
+ ata_timing_compute(adev, adev->pio_mode, &p, T, UT);
+ ata_timing_merge(&p, t, t, ATA_TIMING_ALL);
+ }
+
+ /*
+ * Lenghten active & recovery time so that cycle time is correct.
+ */
+
+ if (t->act8b + t->rec8b < t->cyc8b) {
+ t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
+ t->rec8b = t->cyc8b - t->act8b;
+ }
+
+ if (t->active + t->recover < t->cycle) {
+ t->active += (t->cycle - (t->active + t->recover)) / 2;
+ t->recover = t->cycle - t->active;
+ }
+
+ return 0;
+}
+
+static const struct {
unsigned int shift;
u8 base;
} xfer_mode_classes[] = {
@@ -1603,7 +1791,7 @@
*/
static void ata_set_mode(struct ata_port *ap)
{
- unsigned int i, xfer_shift;
+ unsigned int xfer_shift;
u8 xfer_mode;
int rc;
@@ -1632,11 +1820,6 @@
if (ap->ops->post_set_mode)
ap->ops->post_set_mode(ap);
- for (i = 0; i < 2; i++) {
- struct ata_device *dev = &ap->device[i];
- ata_dev_set_protocol(dev);
- }
-
return;
err_out:
@@ -1910,7 +2093,8 @@
DPRINTK("EXIT\n");
}
-static void ata_pr_blacklisted(struct ata_port *ap, struct ata_device *dev)
+static void ata_pr_blacklisted(const struct ata_port *ap,
+ const struct ata_device *dev)
{
printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n",
ap->id, dev->devno);
@@ -1948,7 +2132,7 @@
"_NEC DV5800A",
};
-static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev)
+static int ata_dma_blacklisted(const struct ata_device *dev)
{
unsigned char model_num[40];
char *s;
@@ -1973,9 +2157,9 @@
return 0;
}
-static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
+static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift)
{
- struct ata_device *master, *slave;
+ const struct ata_device *master, *slave;
unsigned int mask;
master = &ap->device[0];
@@ -1987,14 +2171,14 @@
mask = ap->udma_mask;
if (ata_dev_present(master)) {
mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff);
- if (ata_dma_blacklisted(ap, master)) {
+ if (ata_dma_blacklisted(master)) {
mask = 0;
ata_pr_blacklisted(ap, master);
}
}
if (ata_dev_present(slave)) {
mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff);
- if (ata_dma_blacklisted(ap, slave)) {
+ if (ata_dma_blacklisted(slave)) {
mask = 0;
ata_pr_blacklisted(ap, slave);
}
@@ -2004,14 +2188,14 @@
mask = ap->mwdma_mask;
if (ata_dev_present(master)) {
mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07);
- if (ata_dma_blacklisted(ap, master)) {
+ if (ata_dma_blacklisted(master)) {
mask = 0;
ata_pr_blacklisted(ap, master);
}
}
if (ata_dev_present(slave)) {
mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07);
- if (ata_dma_blacklisted(ap, slave)) {
+ if (ata_dma_blacklisted(slave)) {
mask = 0;
ata_pr_blacklisted(ap, slave);
}
@@ -2075,7 +2259,7 @@
* Zero on success, negative on error.
*/
-static int ata_choose_xfer_mode(struct ata_port *ap,
+static int ata_choose_xfer_mode(const struct ata_port *ap,
u8 *xfer_mode_out,
unsigned int *xfer_shift_out)
{
@@ -2144,6 +2328,110 @@
}
/**
+ * ata_dev_reread_id - Reread the device identify device info
+ * @ap: port where the device is
+ * @dev: device to reread the identify device info
+ *
+ * LOCKING:
+ */
+
+static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev)
+{
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int rc;
+
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ ata_sg_init_one(qc, dev->id, sizeof(dev->id));
+ qc->dma_dir = DMA_FROM_DEVICE;
+
+ if (dev->class == ATA_DEV_ATA) {
+ qc->tf.command = ATA_CMD_ID_ATA;
+ DPRINTK("do ATA identify\n");
+ } else {
+ qc->tf.command = ATA_CMD_ID_ATAPI;
+ DPRINTK("do ATAPI identify\n");
+ }
+
+ qc->tf.flags |= ATA_TFLAG_DEVICE;
+ qc->tf.protocol = ATA_PROT_PIO;
+ qc->nsect = 1;
+
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (rc)
+ goto err_out;
+
+ wait_for_completion(&wait);
+
+ swap_buf_le16(dev->id, ATA_ID_WORDS);
+
+ ata_dump_id(dev);
+
+ DPRINTK("EXIT\n");
+
+ return;
+err_out:
+ ata_port_disable(ap);
+}
+
+/**
+ * ata_dev_init_params - Issue INIT DEV PARAMS command
+ * @ap: Port associated with device @dev
+ * @dev: Device to which command will be sent
+ *
+ * LOCKING:
+ */
+
+static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev)
+{
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ int rc;
+ unsigned long flags;
+ u16 sectors = dev->id[6];
+ u16 heads = dev->id[3];
+
+ /* Number of sectors per track 1-255. Number of heads 1-16 */
+ if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
+ return;
+
+ /* set up init dev params taskfile */
+ DPRINTK("init dev params \n");
+
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ qc->tf.command = ATA_CMD_INIT_DEV_PARAMS;
+ qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ qc->tf.protocol = ATA_PROT_NODATA;
+ qc->tf.nsect = sectors;
+ qc->tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
+
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (rc)
+ ata_port_disable(ap);
+ else
+ wait_for_completion(&wait);
+
+ DPRINTK("EXIT\n");
+}
+
+/**
* ata_sg_clean - Unmap DMA memory associated with command
* @qc: Command containing DMA memory to be released
*
@@ -2413,32 +2701,32 @@
/**
* ata_pio_poll -
- * @ap:
+ * @ap: the target ata_port
*
* LOCKING:
* None. (executing in kernel thread context)
*
* RETURNS:
- *
+ * timeout value to use
*/
static unsigned long ata_pio_poll(struct ata_port *ap)
{
u8 status;
- unsigned int poll_state = PIO_ST_UNKNOWN;
- unsigned int reg_state = PIO_ST_UNKNOWN;
- const unsigned int tmout_state = PIO_ST_TMOUT;
+ unsigned int poll_state = HSM_ST_UNKNOWN;
+ unsigned int reg_state = HSM_ST_UNKNOWN;
+ const unsigned int tmout_state = HSM_ST_TMOUT;
- switch (ap->pio_task_state) {
- case PIO_ST:
- case PIO_ST_POLL:
- poll_state = PIO_ST_POLL;
- reg_state = PIO_ST;
+ switch (ap->hsm_task_state) {
+ case HSM_ST:
+ case HSM_ST_POLL:
+ poll_state = HSM_ST_POLL;
+ reg_state = HSM_ST;
break;
- case PIO_ST_LAST:
- case PIO_ST_LAST_POLL:
- poll_state = PIO_ST_LAST_POLL;
- reg_state = PIO_ST_LAST;
+ case HSM_ST_LAST:
+ case HSM_ST_LAST_POLL:
+ poll_state = HSM_ST_LAST_POLL;
+ reg_state = HSM_ST_LAST;
break;
default:
BUG();
@@ -2448,20 +2736,20 @@
status = ata_chk_status(ap);
if (status & ATA_BUSY) {
if (time_after(jiffies, ap->pio_task_timeout)) {
- ap->pio_task_state = tmout_state;
+ ap->hsm_task_state = tmout_state;
return 0;
}
- ap->pio_task_state = poll_state;
+ ap->hsm_task_state = poll_state;
return ATA_SHORT_PAUSE;
}
- ap->pio_task_state = reg_state;
+ ap->hsm_task_state = reg_state;
return 0;
}
/**
- * ata_pio_complete -
- * @ap:
+ * ata_pio_complete - check if drive is busy or idle
+ * @ap: the target ata_port
*
* LOCKING:
* None. (executing in kernel thread context)
@@ -2480,14 +2768,14 @@
* we enter, BSY will be cleared in a chk-status or two. If not,
* the drive is probably seeking or something. Snooze for a couple
* msecs, then chk-status again. If still busy, fall back to
- * PIO_ST_POLL state.
+ * HSM_ST_POLL state.
*/
drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10);
if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
msleep(2);
drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10);
if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
- ap->pio_task_state = PIO_ST_LAST_POLL;
+ ap->hsm_task_state = HSM_ST_LAST_POLL;
ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
return 0;
}
@@ -2495,14 +2783,14 @@
drv_stat = ata_wait_idle(ap);
if (!ata_ok(drv_stat)) {
- ap->pio_task_state = PIO_ST_ERR;
+ ap->hsm_task_state = HSM_ST_ERR;
return 0;
}
qc = ata_qc_from_tag(ap, ap->active_tag);
assert(qc != NULL);
- ap->pio_task_state = PIO_ST_IDLE;
+ ap->hsm_task_state = HSM_ST_IDLE;
ata_poll_qc_complete(qc, drv_stat);
@@ -2513,7 +2801,7 @@
/**
- * swap_buf_le16 -
+ * swap_buf_le16 - swap halves of 16-words in place
* @buf: Buffer to swap
* @buf_words: Number of 16-bit words in buffer.
*
@@ -2522,6 +2810,7 @@
* vice-versa.
*
* LOCKING:
+ * Inherited from caller.
*/
void swap_buf_le16(u16 *buf, unsigned int buf_words)
{
@@ -2544,7 +2833,6 @@
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -2590,7 +2878,6 @@
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -2630,7 +2917,6 @@
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -2662,7 +2948,7 @@
unsigned char *buf;
if (qc->cursect == (qc->nsect - 1))
- ap->pio_task_state = PIO_ST_LAST;
+ ap->hsm_task_state = HSM_ST_LAST;
page = sg[qc->cursg].page;
offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE;
@@ -2712,7 +2998,7 @@
unsigned int offset, count;
if (qc->curbytes + bytes >= qc->nbytes)
- ap->pio_task_state = PIO_ST_LAST;
+ ap->hsm_task_state = HSM_ST_LAST;
next_sg:
if (unlikely(qc->cursg >= qc->n_elem)) {
@@ -2734,7 +3020,7 @@
for (i = 0; i < words; i++)
ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write);
- ap->pio_task_state = PIO_ST_LAST;
+ ap->hsm_task_state = HSM_ST_LAST;
return;
}
@@ -2783,7 +3069,6 @@
*
* LOCKING:
* Inherited from caller.
- *
*/
static void atapi_pio_bytes(struct ata_queued_cmd *qc)
@@ -2815,12 +3100,12 @@
err_out:
printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n",
ap->id, dev->devno);
- ap->pio_task_state = PIO_ST_ERR;
+ ap->hsm_task_state = HSM_ST_ERR;
}
/**
- * ata_pio_sector -
- * @ap:
+ * ata_pio_block - start PIO on a block
+ * @ap: the target ata_port
*
* LOCKING:
* None. (executing in kernel thread context)
@@ -2832,19 +3117,19 @@
u8 status;
/*
- * This is purely hueristic. This is a fast path.
+ * This is purely heuristic. This is a fast path.
* Sometimes when we enter, BSY will be cleared in
* a chk-status or two. If not, the drive is probably seeking
* or something. Snooze for a couple msecs, then
* chk-status again. If still busy, fall back to
- * PIO_ST_POLL state.
+ * HSM_ST_POLL state.
*/
status = ata_busy_wait(ap, ATA_BUSY, 5);
if (status & ATA_BUSY) {
msleep(2);
status = ata_busy_wait(ap, ATA_BUSY, 10);
if (status & ATA_BUSY) {
- ap->pio_task_state = PIO_ST_POLL;
+ ap->hsm_task_state = HSM_ST_POLL;
ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
return;
}
@@ -2856,7 +3141,7 @@
if (is_atapi_taskfile(&qc->tf)) {
/* no more data to transfer or unsupported ATAPI command */
if ((status & ATA_DRQ) == 0) {
- ap->pio_task_state = PIO_ST_LAST;
+ ap->hsm_task_state = HSM_ST_LAST;
return;
}
@@ -2864,7 +3149,7 @@
} else {
/* handle BSY=0, DRQ=0 as error */
if ((status & ATA_DRQ) == 0) {
- ap->pio_task_state = PIO_ST_ERR;
+ ap->hsm_task_state = HSM_ST_ERR;
return;
}
@@ -2884,7 +3169,7 @@
printk(KERN_WARNING "ata%u: PIO error, drv_stat 0x%x\n",
ap->id, drv_stat);
- ap->pio_task_state = PIO_ST_IDLE;
+ ap->hsm_task_state = HSM_ST_IDLE;
ata_poll_qc_complete(qc, drv_stat | ATA_ERR);
}
@@ -2899,25 +3184,25 @@
timeout = 0;
qc_completed = 0;
- switch (ap->pio_task_state) {
- case PIO_ST_IDLE:
+ switch (ap->hsm_task_state) {
+ case HSM_ST_IDLE:
return;
- case PIO_ST:
+ case HSM_ST:
ata_pio_block(ap);
break;
- case PIO_ST_LAST:
+ case HSM_ST_LAST:
qc_completed = ata_pio_complete(ap);
break;
- case PIO_ST_POLL:
- case PIO_ST_LAST_POLL:
+ case HSM_ST_POLL:
+ case HSM_ST_LAST_POLL:
timeout = ata_pio_poll(ap);
break;
- case PIO_ST_TMOUT:
- case PIO_ST_ERR:
+ case HSM_ST_TMOUT:
+ case HSM_ST_ERR:
ata_pio_error(ap);
return;
}
@@ -2928,52 +3213,6 @@
goto fsm_start;
}
-static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
- struct scsi_cmnd *cmd)
-{
- DECLARE_COMPLETION(wait);
- struct ata_queued_cmd *qc;
- unsigned long flags;
- int rc;
-
- DPRINTK("ATAPI request sense\n");
-
- qc = ata_qc_new_init(ap, dev);
- BUG_ON(qc == NULL);
-
- /* FIXME: is this needed? */
- memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
-
- ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
- qc->dma_dir = DMA_FROM_DEVICE;
-
- memset(&qc->cdb, 0, ap->cdb_len);
- qc->cdb[0] = REQUEST_SENSE;
- qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
-
- qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- qc->tf.command = ATA_CMD_PACKET;
-
- qc->tf.protocol = ATA_PROT_ATAPI;
- qc->tf.lbam = (8 * 1024) & 0xff;
- qc->tf.lbah = (8 * 1024) >> 8;
- qc->nbytes = SCSI_SENSE_BUFFERSIZE;
-
- qc->waiting = &wait;
- qc->complete_fn = ata_qc_complete_noop;
-
- spin_lock_irqsave(&ap->host_set->lock, flags);
- rc = ata_qc_issue(qc);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- if (rc)
- ata_port_disable(ap);
- else
- wait_for_completion(&wait);
-
- DPRINTK("EXIT\n");
-}
-
/**
* ata_qc_timeout - Handle timeout of queued command
* @qc: Command that timed out
@@ -3091,14 +3330,14 @@
DPRINTK("ENTER\n");
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (!qc) {
+ if (qc)
+ ata_qc_timeout(qc);
+ else {
printk(KERN_ERR "ata%u: BUG: timeout without command\n",
ap->id);
goto out;
}
- ata_qc_timeout(qc);
-
out:
DPRINTK("EXIT\n");
}
@@ -3155,15 +3394,12 @@
qc->nbytes = qc->curbytes = 0;
ata_tf_init(ap, &qc->tf, dev->devno);
-
- if (dev->flags & ATA_DFLAG_LBA48)
- qc->tf.flags |= ATA_TFLAG_LBA48;
}
return qc;
}
-static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat)
+int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat)
{
return 0;
}
@@ -3201,7 +3437,6 @@
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
- *
*/
void ata_qc_free(struct ata_queued_cmd *qc)
{
@@ -3221,7 +3456,6 @@
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
- *
*/
void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
@@ -3360,7 +3594,7 @@
case ATA_PROT_PIO: /* load tf registers, initiate polling pio */
ata_qc_set_polling(qc);
ata_tf_to_host_nolock(ap, &qc->tf);
- ap->pio_task_state = PIO_ST;
+ ap->hsm_task_state = HSM_ST;
queue_work(ata_wq, &ap->pio_task);
break;
@@ -3586,7 +3820,7 @@
void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
host_stat = readb(mmio + ATA_DMA_STATUS);
} else
- host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
return host_stat;
}
@@ -3715,7 +3949,6 @@
*
* RETURNS:
* IRQ_NONE or IRQ_HANDLED.
- *
*/
irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
@@ -3806,7 +4039,7 @@
ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
/* PIO commands are handled by polling */
- ap->pio_task_state = PIO_ST;
+ ap->hsm_task_state = HSM_ST;
queue_work(ata_wq, &ap->pio_task);
}
@@ -3827,6 +4060,7 @@
* May be used as the port_start() entry in ata_port_operations.
*
* LOCKING:
+ * Inherited from caller.
*/
int ata_port_start (struct ata_port *ap)
@@ -3852,6 +4086,7 @@
* May be used as the port_stop() entry in ata_port_operations.
*
* LOCKING:
+ * Inherited from caller.
*/
void ata_port_stop (struct ata_port *ap)
@@ -3874,6 +4109,7 @@
* @do_unregister: 1 if we fully unregister, 0 to just stop the port
*
* LOCKING:
+ * Inherited from caller.
*/
static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
@@ -3901,12 +4137,11 @@
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
struct ata_host_set *host_set,
- struct ata_probe_ent *ent, unsigned int port_no)
+ const struct ata_probe_ent *ent, unsigned int port_no)
{
unsigned int i;
@@ -3962,10 +4197,9 @@
*
* RETURNS:
* New ata_port on success, for NULL on error.
- *
*/
-static struct ata_port * ata_host_add(struct ata_probe_ent *ent,
+static struct ata_port * ata_host_add(const struct ata_probe_ent *ent,
struct ata_host_set *host_set,
unsigned int port_no)
{
@@ -4010,10 +4244,9 @@
*
* RETURNS:
* Number of ports registered. Zero on error (no ports registered).
- *
*/
-int ata_device_add(struct ata_probe_ent *ent)
+int ata_device_add(const struct ata_probe_ent *ent)
{
unsigned int count = 0, i;
struct device *dev = ent->dev;
@@ -4113,7 +4346,7 @@
for (i = 0; i < count; i++) {
struct ata_port *ap = host_set->ports[i];
- scsi_scan_host(ap->host);
+ ata_scsi_scan_host(ap);
}
dev_set_drvdata(dev, host_set);
@@ -4142,7 +4375,6 @@
* Inherited from calling layer (may sleep).
*/
-
void ata_host_set_remove(struct ata_host_set *host_set)
{
struct ata_port *ap;
@@ -4232,7 +4464,7 @@
}
static struct ata_probe_ent *
-ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port)
+ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
{
struct ata_probe_ent *probe_ent;
@@ -4273,85 +4505,86 @@
* ata_pci_init_native_mode - Initialize native-mode driver
* @pdev: pci device to be initialized
* @port: array[2] of pointers to port info structures.
+ * @ports: bitmap of ports present
*
* Utility function which allocates and initializes an
* ata_probe_ent structure for a standard dual-port
* PIO-based IDE controller. The returned ata_probe_ent
* structure can be passed to ata_device_add(). The returned
* ata_probe_ent structure should then be freed with kfree().
+ *
+ * The caller need only pass the address of the primary port, the
+ * secondary will be deduced automatically. If the device has non
+ * standard secondary port mappings this function can be called twice,
+ * once for each interface.
*/
struct ata_probe_ent *
-ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
+ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports)
{
struct ata_probe_ent *probe_ent =
ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+ int p = 0;
+
if (!probe_ent)
return NULL;
- probe_ent->n_ports = 2;
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = SA_SHIRQ;
- probe_ent->port[0].cmd_addr = pci_resource_start(pdev, 0);
- probe_ent->port[0].altstatus_addr =
- probe_ent->port[0].ctl_addr =
- pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
- probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4);
+ if (ports & ATA_PORT_PRIMARY) {
+ probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0);
+ probe_ent->port[p].altstatus_addr =
+ probe_ent->port[p].ctl_addr =
+ pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
+ probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4);
+ ata_std_ports(&probe_ent->port[p]);
+ p++;
+ }
- probe_ent->port[1].cmd_addr = pci_resource_start(pdev, 2);
- probe_ent->port[1].altstatus_addr =
- probe_ent->port[1].ctl_addr =
- pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
- probe_ent->port[1].bmdma_addr = pci_resource_start(pdev, 4) + 8;
+ if (ports & ATA_PORT_SECONDARY) {
+ probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2);
+ probe_ent->port[p].altstatus_addr =
+ probe_ent->port[p].ctl_addr =
+ pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
+ probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8;
+ ata_std_ports(&probe_ent->port[p]);
+ p++;
+ }
- ata_std_ports(&probe_ent->port[0]);
- ata_std_ports(&probe_ent->port[1]);
-
+ probe_ent->n_ports = p;
return probe_ent;
}
-static struct ata_probe_ent *
-ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port,
- struct ata_probe_ent **ppe2)
+static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info **port, int port_num)
{
- struct ata_probe_ent *probe_ent, *probe_ent2;
+ struct ata_probe_ent *probe_ent;
probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
if (!probe_ent)
return NULL;
- probe_ent2 = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[1]);
- if (!probe_ent2) {
- kfree(probe_ent);
- return NULL;
- }
- probe_ent->n_ports = 1;
- probe_ent->irq = 14;
-
- probe_ent->hard_port_no = 0;
probe_ent->legacy_mode = 1;
+ probe_ent->n_ports = 1;
+ probe_ent->hard_port_no = port_num;
- probe_ent2->n_ports = 1;
- probe_ent2->irq = 15;
-
- probe_ent2->hard_port_no = 1;
- probe_ent2->legacy_mode = 1;
-
- probe_ent->port[0].cmd_addr = 0x1f0;
- probe_ent->port[0].altstatus_addr =
- probe_ent->port[0].ctl_addr = 0x3f6;
- probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4);
-
- probe_ent2->port[0].cmd_addr = 0x170;
- probe_ent2->port[0].altstatus_addr =
- probe_ent2->port[0].ctl_addr = 0x376;
- probe_ent2->port[0].bmdma_addr = pci_resource_start(pdev, 4)+8;
-
+ switch(port_num)
+ {
+ case 0:
+ probe_ent->irq = 14;
+ probe_ent->port[0].cmd_addr = 0x1f0;
+ probe_ent->port[0].altstatus_addr =
+ probe_ent->port[0].ctl_addr = 0x3f6;
+ break;
+ case 1:
+ probe_ent->irq = 15;
+ probe_ent->port[0].cmd_addr = 0x170;
+ probe_ent->port[0].altstatus_addr =
+ probe_ent->port[0].ctl_addr = 0x376;
+ break;
+ }
+ probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4) + 8 * port_num;
ata_std_ports(&probe_ent->port[0]);
- ata_std_ports(&probe_ent2->port[0]);
-
- *ppe2 = probe_ent2;
return probe_ent;
}
@@ -4374,13 +4607,12 @@
*
* RETURNS:
* Zero on success, negative on errno-based value on error.
- *
*/
int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
unsigned int n_ports)
{
- struct ata_probe_ent *probe_ent, *probe_ent2 = NULL;
+ struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL;
struct ata_port_info *port[2];
u8 tmp8, mask;
unsigned int legacy_mode = 0;
@@ -4397,7 +4629,7 @@
if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0
&& (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
- /* TODO: support transitioning to native mode? */
+ /* TODO: What if one channel is in native mode ... */
pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
mask = (1 << 2) | (1 << 0);
if ((tmp8 & mask) != mask)
@@ -4405,11 +4637,20 @@
}
/* FIXME... */
- if ((!legacy_mode) && (n_ports > 1)) {
- printk(KERN_ERR "ata: BUG: native mode, n_ports > 1\n");
- return -EINVAL;
+ if ((!legacy_mode) && (n_ports > 2)) {
+ printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n");
+ n_ports = 2;
+ /* For now */
}
+ /* FIXME: Really for ATA it isn't safe because the device may be
+ multi-purpose and we want to leave it alone if it was already
+ enabled. Secondly for shared use as Arjan says we want refcounting
+
+ Checking dev->is_enabled is insufficient as this is not set at
+ boot for the primary video which is BIOS enabled
+ */
+
rc = pci_enable_device(pdev);
if (rc)
return rc;
@@ -4420,6 +4661,7 @@
goto err_out;
}
+ /* FIXME: Should use platform specific mappers for legacy port ranges */
if (legacy_mode) {
if (!request_region(0x1f0, 8, "libata")) {
struct resource *conflict, res;
@@ -4464,10 +4706,17 @@
goto err_out_regions;
if (legacy_mode) {
- probe_ent = ata_pci_init_legacy_mode(pdev, port, &probe_ent2);
- } else
- probe_ent = ata_pci_init_native_mode(pdev, port);
- if (!probe_ent) {
+ if (legacy_mode & (1 << 0))
+ probe_ent = ata_pci_init_legacy_port(pdev, port, 0);
+ if (legacy_mode & (1 << 1))
+ probe_ent2 = ata_pci_init_legacy_port(pdev, port, 1);
+ } else {
+ if (n_ports == 2)
+ probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+ else
+ probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
+ }
+ if (!probe_ent && !probe_ent2) {
rc = -ENOMEM;
goto err_out_regions;
}
@@ -4505,7 +4754,7 @@
* @pdev: PCI device that was removed
*
* PCI layer indicates to libata via this hook that
- * hot-unplug or module unload event has occured.
+ * hot-unplug or module unload event has occurred.
* Handle this by unregistering all objects associated
* with this PCI device. Free those objects. Then finally
* release PCI resources and disable device.
@@ -4526,7 +4775,7 @@
}
/* move to PCI subsystem */
-int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits)
+int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
{
unsigned long tmp = 0;
@@ -4579,6 +4828,27 @@
module_init(ata_init);
module_exit(ata_exit);
+static unsigned long ratelimit_time;
+static spinlock_t ata_ratelimit_lock = SPIN_LOCK_UNLOCKED;
+
+int ata_ratelimit(void)
+{
+ int rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ata_ratelimit_lock, flags);
+
+ if (time_after(jiffies, ratelimit_time)) {
+ rc = 1;
+ ratelimit_time = jiffies + (HZ/5);
+ } else
+ rc = 0;
+
+ spin_unlock_irqrestore(&ata_ratelimit_lock, flags);
+
+ return rc;
+}
+
/*
* libata is essentially a library of internal helper functions for
* low-level ATA host controller drivers. As such, the API/ABI is
@@ -4620,6 +4890,7 @@
EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
EXPORT_SYMBOL_GPL(ata_port_disable);
+EXPORT_SYMBOL_GPL(ata_ratelimit);
EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
EXPORT_SYMBOL_GPL(ata_scsi_error);
@@ -4631,6 +4902,9 @@
EXPORT_SYMBOL_GPL(ata_dev_config);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
+EXPORT_SYMBOL_GPL(ata_timing_compute);
+EXPORT_SYMBOL_GPL(ata_timing_merge);
+
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(pci_test_config_bits);
EXPORT_SYMBOL_GPL(ata_pci_host_stop);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 104fd9a..5885888 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -44,11 +44,19 @@
#include "libata.h"
-typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, u8 *scsicmd);
+typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
static struct ata_device *
-ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev);
+ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev);
+static void ata_scsi_invalid_field(struct scsi_cmnd *cmd,
+ void (*done)(struct scsi_cmnd *))
+{
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ done(cmd);
+}
+
/**
* ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
* @sdev: SCSI device for which BIOS geometry is to be determined
@@ -182,7 +190,6 @@
{
struct scsi_cmnd *cmd = qc->scsicmd;
u8 err = 0;
- unsigned char *sb = cmd->sense_buffer;
/* Based on the 3ware driver translation table */
static unsigned char sense_table[][4] = {
/* BBD|ECC|ID|MAR */
@@ -225,8 +232,6 @@
};
int i = 0;
- cmd->result = SAM_STAT_CHECK_CONDITION;
-
/*
* Is this an error we can process/parse
*/
@@ -281,11 +286,9 @@
/* Look for best matches first */
if((sense_table[i][0] & err) == sense_table[i][0])
{
- sb[0] = 0x70;
- sb[2] = sense_table[i][1];
- sb[7] = 0x0a;
- sb[12] = sense_table[i][2];
- sb[13] = sense_table[i][3];
+ ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
+ sense_table[i][2] /* asc */,
+ sense_table[i][3] /* ascq */ );
return;
}
i++;
@@ -300,11 +303,9 @@
{
if(stat_table[i][0] & drv_stat)
{
- sb[0] = 0x70;
- sb[2] = stat_table[i][1];
- sb[7] = 0x0a;
- sb[12] = stat_table[i][2];
- sb[13] = stat_table[i][3];
+ ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
+ sense_table[i][2] /* asc */,
+ sense_table[i][3] /* ascq */ );
return;
}
i++;
@@ -313,15 +314,12 @@
printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat);
/* additional-sense-code[-qualifier] */
- sb[0] = 0x70;
- sb[2] = MEDIUM_ERROR;
- sb[7] = 0x0A;
if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
- sb[12] = 0x11; /* "unrecovered read error" */
- sb[13] = 0x04;
+ ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0x11, 0x4);
+ /* "unrecovered read error" */
} else {
- sb[12] = 0x0C; /* "write error - */
- sb[13] = 0x02; /* auto-reallocation failed" */
+ ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0xc, 0x2);
+ /* "write error - auto-reallocation failed" */
}
}
@@ -420,7 +418,7 @@
*/
static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc,
- u8 *scsicmd)
+ const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
@@ -430,15 +428,26 @@
; /* ignore IMMED bit, violates sat-r05 */
}
if (scsicmd[4] & 0x2)
- return 1; /* LOEJ bit set not supported */
+ goto invalid_fld; /* LOEJ bit set not supported */
if (((scsicmd[4] >> 4) & 0xf) != 0)
- return 1; /* power conditions not supported */
+ goto invalid_fld; /* power conditions not supported */
if (scsicmd[4] & 0x1) {
tf->nsect = 1; /* 1 sector, lba=0 */
- tf->lbah = 0x0;
- tf->lbam = 0x0;
- tf->lbal = 0x0;
- tf->device |= ATA_LBA;
+
+ if (qc->dev->flags & ATA_DFLAG_LBA) {
+ qc->tf.flags |= ATA_TFLAG_LBA;
+
+ tf->lbah = 0x0;
+ tf->lbam = 0x0;
+ tf->lbal = 0x0;
+ tf->device |= ATA_LBA;
+ } else {
+ /* CHS */
+ tf->lbal = 0x1; /* sect */
+ tf->lbam = 0x0; /* cyl low */
+ tf->lbah = 0x0; /* cyl high */
+ }
+
tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
} else {
tf->nsect = 0; /* time period value (0 implies now) */
@@ -453,6 +462,11 @@
*/
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
}
@@ -471,14 +485,14 @@
* Zero on success, non-zero on error.
*/
-static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
tf->flags |= ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- if ((tf->flags & ATA_TFLAG_LBA48) &&
+ if ((qc->dev->flags & ATA_DFLAG_LBA48) &&
(ata_id_has_flush_ext(qc->dev->id)))
tf->command = ATA_CMD_FLUSH_EXT;
else
@@ -488,6 +502,99 @@
}
/**
+ * scsi_6_lba_len - Get LBA and transfer length
+ * @scsicmd: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 6-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+
+static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("six-byte command\n");
+
+ lba |= ((u64)scsicmd[2]) << 8;
+ lba |= ((u64)scsicmd[3]);
+
+ len |= ((u32)scsicmd[4]);
+
+ *plba = lba;
+ *plen = len;
+}
+
+/**
+ * scsi_10_lba_len - Get LBA and transfer length
+ * @scsicmd: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 10-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+
+static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("ten-byte command\n");
+
+ lba |= ((u64)scsicmd[2]) << 24;
+ lba |= ((u64)scsicmd[3]) << 16;
+ lba |= ((u64)scsicmd[4]) << 8;
+ lba |= ((u64)scsicmd[5]);
+
+ len |= ((u32)scsicmd[7]) << 8;
+ len |= ((u32)scsicmd[8]);
+
+ *plba = lba;
+ *plen = len;
+}
+
+/**
+ * scsi_16_lba_len - Get LBA and transfer length
+ * @scsicmd: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 16-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+
+static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("sixteen-byte command\n");
+
+ lba |= ((u64)scsicmd[2]) << 56;
+ lba |= ((u64)scsicmd[3]) << 48;
+ lba |= ((u64)scsicmd[4]) << 40;
+ lba |= ((u64)scsicmd[5]) << 32;
+ lba |= ((u64)scsicmd[6]) << 24;
+ lba |= ((u64)scsicmd[7]) << 16;
+ lba |= ((u64)scsicmd[8]) << 8;
+ lba |= ((u64)scsicmd[9]);
+
+ len |= ((u32)scsicmd[10]) << 24;
+ len |= ((u32)scsicmd[11]) << 16;
+ len |= ((u32)scsicmd[12]) << 8;
+ len |= ((u32)scsicmd[13]);
+
+ *plba = lba;
+ *plen = len;
+}
+
+/**
* ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one
* @qc: Storage for translated ATA taskfile
* @scsicmd: SCSI command to translate
@@ -501,82 +608,110 @@
* Zero on success, non-zero on error.
*/
-static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
- unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48;
+ struct ata_device *dev = qc->dev;
u64 dev_sectors = qc->dev->n_sectors;
- u64 sect = 0;
- u32 n_sect = 0;
+ u64 block;
+ u32 n_block;
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- tf->device |= ATA_LBA;
- if (scsicmd[0] == VERIFY) {
- sect |= ((u64)scsicmd[2]) << 24;
- sect |= ((u64)scsicmd[3]) << 16;
- sect |= ((u64)scsicmd[4]) << 8;
- sect |= ((u64)scsicmd[5]);
-
- n_sect |= ((u32)scsicmd[7]) << 8;
- n_sect |= ((u32)scsicmd[8]);
- }
-
- else if (scsicmd[0] == VERIFY_16) {
- sect |= ((u64)scsicmd[2]) << 56;
- sect |= ((u64)scsicmd[3]) << 48;
- sect |= ((u64)scsicmd[4]) << 40;
- sect |= ((u64)scsicmd[5]) << 32;
- sect |= ((u64)scsicmd[6]) << 24;
- sect |= ((u64)scsicmd[7]) << 16;
- sect |= ((u64)scsicmd[8]) << 8;
- sect |= ((u64)scsicmd[9]);
-
- n_sect |= ((u32)scsicmd[10]) << 24;
- n_sect |= ((u32)scsicmd[11]) << 16;
- n_sect |= ((u32)scsicmd[12]) << 8;
- n_sect |= ((u32)scsicmd[13]);
- }
-
+ if (scsicmd[0] == VERIFY)
+ scsi_10_lba_len(scsicmd, &block, &n_block);
+ else if (scsicmd[0] == VERIFY_16)
+ scsi_16_lba_len(scsicmd, &block, &n_block);
else
- return 1;
+ goto invalid_fld;
- if (!n_sect)
- return 1;
- if (sect >= dev_sectors)
- return 1;
- if ((sect + n_sect) > dev_sectors)
- return 1;
- if (lba48) {
- if (n_sect > (64 * 1024))
- return 1;
+ if (!n_block)
+ goto nothing_to_do;
+ if (block >= dev_sectors)
+ goto out_of_range;
+ if ((block + n_block) > dev_sectors)
+ goto out_of_range;
+
+ if (dev->flags & ATA_DFLAG_LBA) {
+ tf->flags |= ATA_TFLAG_LBA;
+
+ if (dev->flags & ATA_DFLAG_LBA48) {
+ if (n_block > (64 * 1024))
+ goto invalid_fld;
+
+ /* use LBA48 */
+ tf->flags |= ATA_TFLAG_LBA48;
+ tf->command = ATA_CMD_VERIFY_EXT;
+
+ tf->hob_nsect = (n_block >> 8) & 0xff;
+
+ tf->hob_lbah = (block >> 40) & 0xff;
+ tf->hob_lbam = (block >> 32) & 0xff;
+ tf->hob_lbal = (block >> 24) & 0xff;
+ } else {
+ if (n_block > 256)
+ goto invalid_fld;
+
+ /* use LBA28 */
+ tf->command = ATA_CMD_VERIFY;
+
+ tf->device |= (block >> 24) & 0xf;
+ }
+
+ tf->nsect = n_block & 0xff;
+
+ tf->lbah = (block >> 16) & 0xff;
+ tf->lbam = (block >> 8) & 0xff;
+ tf->lbal = block & 0xff;
+
+ tf->device |= ATA_LBA;
} else {
- if (n_sect > 256)
- return 1;
- }
+ /* CHS */
+ u32 sect, head, cyl, track;
- if (lba48) {
- tf->command = ATA_CMD_VERIFY_EXT;
+ if (n_block > 256)
+ goto invalid_fld;
- tf->hob_nsect = (n_sect >> 8) & 0xff;
+ /* Convert LBA to CHS */
+ track = (u32)block / dev->sectors;
+ cyl = track / dev->heads;
+ head = track % dev->heads;
+ sect = (u32)block % dev->sectors + 1;
- tf->hob_lbah = (sect >> 40) & 0xff;
- tf->hob_lbam = (sect >> 32) & 0xff;
- tf->hob_lbal = (sect >> 24) & 0xff;
- } else {
+ DPRINTK("block %u track %u cyl %u head %u sect %u\n",
+ (u32)block, track, cyl, head, sect);
+
+ /* Check whether the converted CHS can fit.
+ Cylinder: 0-65535
+ Head: 0-15
+ Sector: 1-255*/
+ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
+ goto out_of_range;
+
tf->command = ATA_CMD_VERIFY;
-
- tf->device |= (sect >> 24) & 0xf;
+ tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
+ tf->lbal = sect;
+ tf->lbam = cyl;
+ tf->lbah = cyl >> 8;
+ tf->device |= head;
}
- tf->nsect = n_sect & 0xff;
-
- tf->lbah = (sect >> 16) & 0xff;
- tf->lbam = (sect >> 8) & 0xff;
- tf->lbal = sect & 0xff;
-
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+out_of_range:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ /* "Logical Block Address out of range" */
+ return 1;
+
+nothing_to_do:
+ qc->scsicmd->result = SAM_STAT_GOOD;
+ return 1;
}
/**
@@ -599,106 +734,137 @@
* Zero on success, non-zero on error.
*/
-static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
- unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48;
+ struct ata_device *dev = qc->dev;
+ u64 block;
+ u32 n_block;
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- tf->protocol = qc->dev->xfer_protocol;
- tf->device |= ATA_LBA;
- if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 ||
- scsicmd[0] == READ_16) {
- tf->command = qc->dev->read_cmd;
- } else {
- tf->command = qc->dev->write_cmd;
+ if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 ||
+ scsicmd[0] == WRITE_16)
tf->flags |= ATA_TFLAG_WRITE;
+
+ /* Calculate the SCSI LBA and transfer length. */
+ switch (scsicmd[0]) {
+ case READ_10:
+ case WRITE_10:
+ scsi_10_lba_len(scsicmd, &block, &n_block);
+ break;
+ case READ_6:
+ case WRITE_6:
+ scsi_6_lba_len(scsicmd, &block, &n_block);
+
+ /* for 6-byte r/w commands, transfer length 0
+ * means 256 blocks of data, not 0 block.
+ */
+ if (!n_block)
+ n_block = 256;
+ break;
+ case READ_16:
+ case WRITE_16:
+ scsi_16_lba_len(scsicmd, &block, &n_block);
+ break;
+ default:
+ DPRINTK("no-byte command\n");
+ goto invalid_fld;
}
- if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) {
- if (lba48) {
- tf->hob_nsect = scsicmd[7];
- tf->hob_lbal = scsicmd[2];
+ /* Check and compose ATA command */
+ if (!n_block)
+ /* For 10-byte and 16-byte SCSI R/W commands, transfer
+ * length 0 means transfer 0 block of data.
+ * However, for ATA R/W commands, sector count 0 means
+ * 256 or 65536 sectors, not 0 sectors as in SCSI.
+ */
+ goto nothing_to_do;
- qc->nsect = ((unsigned int)scsicmd[7] << 8) |
- scsicmd[8];
- } else {
- /* if we don't support LBA48 addressing, the request
- * -may- be too large. */
- if ((scsicmd[2] & 0xf0) || scsicmd[7])
- return 1;
+ if (dev->flags & ATA_DFLAG_LBA) {
+ tf->flags |= ATA_TFLAG_LBA;
- /* stores LBA27:24 in lower 4 bits of device reg */
- tf->device |= scsicmd[2];
+ if (dev->flags & ATA_DFLAG_LBA48) {
+ /* The request -may- be too large for LBA48. */
+ if ((block >> 48) || (n_block > 65536))
+ goto out_of_range;
- qc->nsect = scsicmd[8];
+ /* use LBA48 */
+ tf->flags |= ATA_TFLAG_LBA48;
+
+ tf->hob_nsect = (n_block >> 8) & 0xff;
+
+ tf->hob_lbah = (block >> 40) & 0xff;
+ tf->hob_lbam = (block >> 32) & 0xff;
+ tf->hob_lbal = (block >> 24) & 0xff;
+ } else {
+ /* use LBA28 */
+
+ /* The request -may- be too large for LBA28. */
+ if ((block >> 28) || (n_block > 256))
+ goto out_of_range;
+
+ tf->device |= (block >> 24) & 0xf;
}
- tf->nsect = scsicmd[8];
- tf->lbal = scsicmd[5];
- tf->lbam = scsicmd[4];
- tf->lbah = scsicmd[3];
+ ata_rwcmd_protocol(qc);
- VPRINTK("ten-byte command\n");
- if (qc->nsect == 0) /* we don't support length==0 cmds */
- return 1;
- return 0;
+ qc->nsect = n_block;
+ tf->nsect = n_block & 0xff;
+
+ tf->lbah = (block >> 16) & 0xff;
+ tf->lbam = (block >> 8) & 0xff;
+ tf->lbal = block & 0xff;
+
+ tf->device |= ATA_LBA;
+ } else {
+ /* CHS */
+ u32 sect, head, cyl, track;
+
+ /* The request -may- be too large for CHS addressing. */
+ if ((block >> 28) || (n_block > 256))
+ goto out_of_range;
+
+ ata_rwcmd_protocol(qc);
+
+ /* Convert LBA to CHS */
+ track = (u32)block / dev->sectors;
+ cyl = track / dev->heads;
+ head = track % dev->heads;
+ sect = (u32)block % dev->sectors + 1;
+
+ DPRINTK("block %u track %u cyl %u head %u sect %u\n",
+ (u32)block, track, cyl, head, sect);
+
+ /* Check whether the converted CHS can fit.
+ Cylinder: 0-65535
+ Head: 0-15
+ Sector: 1-255*/
+ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
+ goto out_of_range;
+
+ qc->nsect = n_block;
+ tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
+ tf->lbal = sect;
+ tf->lbam = cyl;
+ tf->lbah = cyl >> 8;
+ tf->device |= head;
}
- if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) {
- qc->nsect = tf->nsect = scsicmd[4];
- if (!qc->nsect) {
- qc->nsect = 256;
- if (lba48)
- tf->hob_nsect = 1;
- }
+ return 0;
- tf->lbal = scsicmd[3];
- tf->lbam = scsicmd[2];
- tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
- VPRINTK("six-byte command\n");
- return 0;
- }
+out_of_range:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ /* "Logical Block Address out of range" */
+ return 1;
- if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) {
- /* rule out impossible LBAs and sector counts */
- if (scsicmd[2] || scsicmd[3] || scsicmd[10] || scsicmd[11])
- return 1;
-
- if (lba48) {
- tf->hob_nsect = scsicmd[12];
- tf->hob_lbal = scsicmd[6];
- tf->hob_lbam = scsicmd[5];
- tf->hob_lbah = scsicmd[4];
-
- qc->nsect = ((unsigned int)scsicmd[12] << 8) |
- scsicmd[13];
- } else {
- /* once again, filter out impossible non-zero values */
- if (scsicmd[4] || scsicmd[5] || scsicmd[12] ||
- (scsicmd[6] & 0xf0))
- return 1;
-
- /* stores LBA27:24 in lower 4 bits of device reg */
- tf->device |= scsicmd[6];
-
- qc->nsect = scsicmd[13];
- }
-
- tf->nsect = scsicmd[13];
- tf->lbal = scsicmd[9];
- tf->lbam = scsicmd[8];
- tf->lbah = scsicmd[7];
-
- VPRINTK("sixteen-byte command\n");
- if (qc->nsect == 0) /* we don't support length==0 cmds */
- return 1;
- return 0;
- }
-
- DPRINTK("no-byte command\n");
+nothing_to_do:
+ qc->scsicmd->result = SAM_STAT_GOOD;
return 1;
}
@@ -731,6 +897,12 @@
* This function sets up an ata_queued_cmd structure for the
* SCSI command, and sends that ata_queued_cmd to the hardware.
*
+ * The xlat_func argument (actor) returns 0 if ready to execute
+ * ATA command, else 1 to finish translation. If 1 is returned
+ * then cmd->result (and possibly cmd->sense_buffer) are assumed
+ * to be set reflecting an error condition or clean (early)
+ * termination.
+ *
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
@@ -747,7 +919,7 @@
qc = ata_scsi_qc_new(ap, dev, cmd, done);
if (!qc)
- return;
+ goto err_mem;
/* data is present; dma-map it */
if (cmd->sc_data_direction == DMA_FROM_DEVICE ||
@@ -755,7 +927,7 @@
if (unlikely(cmd->request_bufflen < 1)) {
printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n",
ap->id, dev->devno);
- goto err_out;
+ goto err_did;
}
if (cmd->use_sg)
@@ -770,19 +942,28 @@
qc->complete_fn = ata_scsi_qc_complete;
if (xlat_func(qc, scsicmd))
- goto err_out;
+ goto early_finish;
/* select device, send command to hardware */
if (ata_qc_issue(qc))
- goto err_out;
+ goto err_did;
VPRINTK("EXIT\n");
return;
-err_out:
+early_finish:
+ ata_qc_free(qc);
+ done(cmd);
+ DPRINTK("EXIT - early finish (good or error)\n");
+ return;
+
+err_did:
ata_qc_free(qc);
- ata_bad_cdb(cmd, done);
- DPRINTK("EXIT - badcmd\n");
+err_mem:
+ cmd->result = (DID_ERROR << 16);
+ done(cmd);
+ DPRINTK("EXIT - internal\n");
+ return;
}
/**
@@ -849,7 +1030,8 @@
* Mapping the response buffer, calling the command's handler,
* and handling the handler's return value. This return value
* indicates whether the handler wishes the SCSI command to be
- * completed successfully, or not.
+ * completed successfully (0), or not (in which case cmd->result
+ * and sense buffer are assumed to be set).
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
@@ -868,12 +1050,9 @@
rc = actor(args, rbuf, buflen);
ata_scsi_rbuf_put(cmd, rbuf);
- if (rc)
- ata_bad_cdb(cmd, args->done);
- else {
+ if (rc == 0)
cmd->result = SAM_STAT_GOOD;
- args->done(cmd);
- }
+ args->done(cmd);
}
/**
@@ -1179,8 +1358,16 @@
* in the same manner)
*/
page_control = scsicmd[2] >> 6;
- if ((page_control != 0) && (page_control != 3))
- return 1;
+ switch (page_control) {
+ case 0: /* current */
+ break; /* supported */
+ case 3: /* saved */
+ goto saving_not_supp;
+ case 1: /* changeable */
+ case 2: /* defaults */
+ default:
+ goto invalid_fld;
+ }
if (six_byte)
output_len = 4;
@@ -1211,7 +1398,7 @@
break;
default: /* invalid page code */
- return 1;
+ goto invalid_fld;
}
if (six_byte) {
@@ -1224,6 +1411,16 @@
}
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+saving_not_supp:
+ ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0);
+ /* "Saving parameters not supported" */
+ return 1;
}
/**
@@ -1246,10 +1443,20 @@
VPRINTK("ENTER\n");
- if (ata_id_has_lba48(args->id))
- n_sectors = ata_id_u64(args->id, 100);
- else
- n_sectors = ata_id_u32(args->id, 60);
+ if (ata_id_has_lba(args->id)) {
+ if (ata_id_has_lba48(args->id))
+ n_sectors = ata_id_u64(args->id, 100);
+ else
+ n_sectors = ata_id_u32(args->id, 60);
+ } else {
+ /* CHS default translation */
+ n_sectors = args->id[1] * args->id[3] * args->id[6];
+
+ if (ata_id_current_chs_valid(args->id))
+ /* CHS current translation */
+ n_sectors = ata_id_u32(args->id, 57);
+ }
+
n_sectors--; /* ATA TotalUserSectors - 1 */
if (args->cmd->cmnd[0] == READ_CAPACITY) {
@@ -1313,6 +1520,34 @@
}
/**
+ * ata_scsi_set_sense - Set SCSI sense data and status
+ * @cmd: SCSI request to be handled
+ * @sk: SCSI-defined sense key
+ * @asc: SCSI-defined additional sense code
+ * @ascq: SCSI-defined additional sense code qualifier
+ *
+ * Helper function that builds a valid fixed format, current
+ * response code and the given sense key (sk), additional sense
+ * code (asc) and additional sense code qualifier (ascq) with
+ * a SCSI command status of %SAM_STAT_CHECK_CONDITION and
+ * DRIVER_SENSE set in the upper bits of scsi_cmnd::result .
+ *
+ * LOCKING:
+ * Not required
+ */
+
+void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+{
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ cmd->sense_buffer[0] = 0x70; /* fixed format, current */
+ cmd->sense_buffer[2] = sk;
+ cmd->sense_buffer[7] = 18 - 8; /* additional sense length */
+ cmd->sense_buffer[12] = asc;
+ cmd->sense_buffer[13] = ascq;
+}
+
+/**
* ata_scsi_badcmd - End a SCSI request with an error
* @cmd: SCSI request to be handled
* @done: SCSI command completion function
@@ -1330,30 +1565,84 @@
void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq)
{
DPRINTK("ENTER\n");
- cmd->result = SAM_STAT_CHECK_CONDITION;
-
- cmd->sense_buffer[0] = 0x70;
- cmd->sense_buffer[2] = ILLEGAL_REQUEST;
- cmd->sense_buffer[7] = 14 - 8; /* addnl. sense len. FIXME: correct? */
- cmd->sense_buffer[12] = asc;
- cmd->sense_buffer[13] = ascq;
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq);
done(cmd);
}
+void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
+ struct scsi_cmnd *cmd)
+{
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int rc;
+
+ DPRINTK("ATAPI request sense\n");
+
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ /* FIXME: is this needed? */
+ memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
+
+ ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
+ qc->dma_dir = DMA_FROM_DEVICE;
+
+ memset(&qc->cdb, 0, ap->cdb_len);
+ qc->cdb[0] = REQUEST_SENSE;
+ qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
+
+ qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ qc->tf.command = ATA_CMD_PACKET;
+
+ qc->tf.protocol = ATA_PROT_ATAPI;
+ qc->tf.lbam = (8 * 1024) & 0xff;
+ qc->tf.lbah = (8 * 1024) >> 8;
+ qc->nbytes = SCSI_SENSE_BUFFERSIZE;
+
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (rc)
+ ata_port_disable(ap);
+ else
+ wait_for_completion(&wait);
+
+ DPRINTK("EXIT\n");
+}
+
static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
{
struct scsi_cmnd *cmd = qc->scsicmd;
- if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) {
+ VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat);
+
+ if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ)))
+ ata_to_sense_error(qc, drv_stat);
+
+ else if (unlikely(drv_stat & ATA_ERR)) {
DPRINTK("request check condition\n");
+ /* FIXME: command completion with check condition
+ * but no sense causes the error handler to run,
+ * which then issues REQUEST SENSE, fills in the sense
+ * buffer, and completes the command (for the second
+ * time). We need to issue REQUEST SENSE some other
+ * way, to avoid completing the command twice.
+ */
cmd->result = SAM_STAT_CHECK_CONDITION;
qc->scsidone(cmd);
return 1;
- } else {
+ }
+
+ else {
u8 *scsicmd = cmd->cmnd;
if (scsicmd[0] == INQUIRY) {
@@ -1361,15 +1650,30 @@
unsigned int buflen;
buflen = ata_scsi_rbuf_get(cmd, &buf);
- buf[2] = 0x5;
- buf[3] = (buf[3] & 0xf0) | 2;
+
+ /* ATAPI devices typically report zero for their SCSI version,
+ * and sometimes deviate from the spec WRT response data
+ * format. If SCSI version is reported as zero like normal,
+ * then we make the following fixups: 1) Fake MMC-5 version,
+ * to indicate to the Linux scsi midlayer this is a modern
+ * device. 2) Ensure response data format / ATAPI information
+ * are always correct.
+ */
+ /* FIXME: do we ever override EVPD pages and the like, with
+ * this code?
+ */
+ if (buf[2] == 0) {
+ buf[2] = 0x5;
+ buf[3] = 0x32;
+ }
+
ata_scsi_rbuf_put(cmd, buf);
}
+
cmd->result = SAM_STAT_GOOD;
}
qc->scsidone(cmd);
-
return 0;
}
/**
@@ -1384,7 +1688,7 @@
* Zero on success, non-zero on failure.
*/
-static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct scsi_cmnd *cmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
@@ -1453,7 +1757,7 @@
*/
static struct ata_device *
-ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev)
+ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
{
struct ata_device *dev;
@@ -1610,7 +1914,7 @@
void (*done)(struct scsi_cmnd *))
{
struct ata_scsi_args args;
- u8 *scsicmd = cmd->cmnd;
+ const u8 *scsicmd = cmd->cmnd;
args.id = id;
args.cmd = cmd;
@@ -1630,7 +1934,7 @@
case INQUIRY:
if (scsicmd[1] & 2) /* is CmdDt set? */
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std);
else if (scsicmd[2] == 0x00)
@@ -1640,7 +1944,7 @@
else if (scsicmd[2] == 0x83)
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83);
else
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case MODE_SENSE:
@@ -1650,7 +1954,7 @@
case MODE_SELECT: /* unconditionally return */
case MODE_SELECT_10: /* bad-field-in-cdb */
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case READ_CAPACITY:
@@ -1661,7 +1965,7 @@
if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16)
ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
else
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case REPORT_LUNS:
@@ -1673,8 +1977,26 @@
/* all other commands */
default:
- ata_bad_scsiop(cmd, done);
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0);
+ /* "Invalid command operation code" */
+ done(cmd);
break;
}
}
+void ata_scsi_scan_host(struct ata_port *ap)
+{
+ struct ata_device *dev;
+ unsigned int i;
+
+ if (ap->flags & ATA_FLAG_PORT_DISABLED)
+ return;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ dev = &ap->device[i];
+
+ if (ata_dev_present(dev))
+ scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0);
+ }
+}
+
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index d608b3a..3d60190 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -39,18 +39,23 @@
/* libata-core.c */
extern int atapi_enabled;
+extern int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat);
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
struct ata_device *dev);
+extern void ata_rwcmd_protocol(struct ata_queued_cmd *qc);
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern int ata_qc_issue(struct ata_queued_cmd *qc);
extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
extern void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep);
-extern void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf);
+extern void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
/* libata-scsi.c */
+extern void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
+ struct scsi_cmnd *cmd);
+extern void ata_scsi_scan_host(struct ata_port *ap);
extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat);
extern int ata_scsi_error(struct Scsi_Host *host);
extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
@@ -76,18 +81,10 @@
extern void ata_scsi_badcmd(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *),
u8 asc, u8 ascq);
+extern void ata_scsi_set_sense(struct scsi_cmnd *cmd,
+ u8 sk, u8 asc, u8 ascq);
extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
unsigned int (*actor) (struct ata_scsi_args *args,
u8 *rbuf, unsigned int buflen));
-static inline void ata_bad_scsiop(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
-{
- ata_scsi_badcmd(cmd, done, 0x20, 0x00);
-}
-
-static inline void ata_bad_cdb(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
-{
- ata_scsi_badcmd(cmd, done, 0x24, 0x00);
-}
-
#endif /* __LIBATA_H__ */
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
new file mode 100644
index 0000000..9820f27
--- /dev/null
+++ b/drivers/scsi/pdc_adma.c
@@ -0,0 +1,739 @@
+/*
+ * pdc_adma.c - Pacific Digital Corporation ADMA
+ *
+ * Maintained by: Mark Lord <mlord@pobox.com>
+ *
+ * Copyright 2005 Mark Lord
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ *
+ * Supports ATA disks in single-packet ADMA mode.
+ * Uses PIO for everything else.
+ *
+ * TODO: Use ADMA transfers for ATAPI devices, when possible.
+ * This requires careful attention to a number of quirks of the chip.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include <asm/io.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pdc_adma"
+#define DRV_VERSION "0.01"
+
+/* macro to calculate base address for ATA regs */
+#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40))
+
+/* macro to calculate base address for ADMA regs */
+#define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20))
+
+enum {
+ ADMA_PORTS = 2,
+ ADMA_CPB_BYTES = 40,
+ ADMA_PRD_BYTES = LIBATA_MAX_PRD * 16,
+ ADMA_PKT_BYTES = ADMA_CPB_BYTES + ADMA_PRD_BYTES,
+
+ ADMA_DMA_BOUNDARY = 0xffffffff,
+
+ /* global register offsets */
+ ADMA_MODE_LOCK = 0x00c7,
+
+ /* per-channel register offsets */
+ ADMA_CONTROL = 0x0000, /* ADMA control */
+ ADMA_STATUS = 0x0002, /* ADMA status */
+ ADMA_CPB_COUNT = 0x0004, /* CPB count */
+ ADMA_CPB_CURRENT = 0x000c, /* current CPB address */
+ ADMA_CPB_NEXT = 0x000c, /* next CPB address */
+ ADMA_CPB_LOOKUP = 0x0010, /* CPB lookup table */
+ ADMA_FIFO_IN = 0x0014, /* input FIFO threshold */
+ ADMA_FIFO_OUT = 0x0016, /* output FIFO threshold */
+
+ /* ADMA_CONTROL register bits */
+ aNIEN = (1 << 8), /* irq mask: 1==masked */
+ aGO = (1 << 7), /* packet trigger ("Go!") */
+ aRSTADM = (1 << 5), /* ADMA logic reset */
+ aRSTA = (1 << 2), /* ATA hard reset */
+ aPIOMD4 = 0x0003, /* PIO mode 4 */
+
+ /* ADMA_STATUS register bits */
+ aPSD = (1 << 6),
+ aUIRQ = (1 << 4),
+ aPERR = (1 << 0),
+
+ /* CPB bits */
+ cDONE = (1 << 0),
+ cVLD = (1 << 0),
+ cDAT = (1 << 2),
+ cIEN = (1 << 3),
+
+ /* PRD bits */
+ pORD = (1 << 4),
+ pDIRO = (1 << 5),
+ pEND = (1 << 7),
+
+ /* ATA register flags */
+ rIGN = (1 << 5),
+ rEND = (1 << 7),
+
+ /* ATA register addresses */
+ ADMA_REGS_CONTROL = 0x0e,
+ ADMA_REGS_SECTOR_COUNT = 0x12,
+ ADMA_REGS_LBA_LOW = 0x13,
+ ADMA_REGS_LBA_MID = 0x14,
+ ADMA_REGS_LBA_HIGH = 0x15,
+ ADMA_REGS_DEVICE = 0x16,
+ ADMA_REGS_COMMAND = 0x17,
+
+ /* PCI device IDs */
+ board_1841_idx = 0, /* ADMA 2-port controller */
+};
+
+typedef enum { adma_state_idle, adma_state_pkt, adma_state_mmio } adma_state_t;
+
+struct adma_port_priv {
+ u8 *pkt;
+ dma_addr_t pkt_dma;
+ adma_state_t state;
+};
+
+static int adma_ata_init_one (struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+static irqreturn_t adma_intr (int irq, void *dev_instance,
+ struct pt_regs *regs);
+static int adma_port_start(struct ata_port *ap);
+static void adma_host_stop(struct ata_host_set *host_set);
+static void adma_port_stop(struct ata_port *ap);
+static void adma_phy_reset(struct ata_port *ap);
+static void adma_qc_prep(struct ata_queued_cmd *qc);
+static int adma_qc_issue(struct ata_queued_cmd *qc);
+static int adma_check_atapi_dma(struct ata_queued_cmd *qc);
+static void adma_bmdma_stop(struct ata_queued_cmd *qc);
+static u8 adma_bmdma_status(struct ata_port *ap);
+static void adma_irq_clear(struct ata_port *ap);
+static void adma_eng_timeout(struct ata_port *ap);
+
+static Scsi_Host_Template adma_ata_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .eh_strategy_handler = ata_scsi_error,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ENABLE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ADMA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static const struct ata_port_operations adma_ata_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .check_atapi_dma = adma_check_atapi_dma,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+ .phy_reset = adma_phy_reset,
+ .qc_prep = adma_qc_prep,
+ .qc_issue = adma_qc_issue,
+ .eng_timeout = adma_eng_timeout,
+ .irq_handler = adma_intr,
+ .irq_clear = adma_irq_clear,
+ .port_start = adma_port_start,
+ .port_stop = adma_port_stop,
+ .host_stop = adma_host_stop,
+ .bmdma_stop = adma_bmdma_stop,
+ .bmdma_status = adma_bmdma_status,
+};
+
+static struct ata_port_info adma_port_info[] = {
+ /* board_1841_idx */
+ {
+ .sht = &adma_ata_sht,
+ .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
+ ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO,
+ .pio_mask = 0x10, /* pio4 */
+ .udma_mask = 0x1f, /* udma0-4 */
+ .port_ops = &adma_ata_ops,
+ },
+};
+
+static struct pci_device_id adma_ata_pci_tbl[] = {
+ { PCI_VENDOR_ID_PDC, 0x1841, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_1841_idx },
+
+ { } /* terminate list */
+};
+
+static struct pci_driver adma_ata_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = adma_ata_pci_tbl,
+ .probe = adma_ata_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+static int adma_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ return 1; /* ATAPI DMA not yet supported */
+}
+
+static void adma_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ /* nothing */
+}
+
+static u8 adma_bmdma_status(struct ata_port *ap)
+{
+ return 0;
+}
+
+static void adma_irq_clear(struct ata_port *ap)
+{
+ /* nothing */
+}
+
+static void adma_reset_engine(void __iomem *chan)
+{
+ /* reset ADMA to idle state */
+ writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL);
+ udelay(2);
+ writew(aPIOMD4, chan + ADMA_CONTROL);
+ udelay(2);
+}
+
+static void adma_reinit_engine(struct ata_port *ap)
+{
+ struct adma_port_priv *pp = ap->private_data;
+ void __iomem *mmio_base = ap->host_set->mmio_base;
+ void __iomem *chan = ADMA_REGS(mmio_base, ap->port_no);
+
+ /* mask/clear ATA interrupts */
+ writeb(ATA_NIEN, (void __iomem *)ap->ioaddr.ctl_addr);
+ ata_check_status(ap);
+
+ /* reset the ADMA engine */
+ adma_reset_engine(chan);
+
+ /* set in-FIFO threshold to 0x100 */
+ writew(0x100, chan + ADMA_FIFO_IN);
+
+ /* set CPB pointer */
+ writel((u32)pp->pkt_dma, chan + ADMA_CPB_NEXT);
+
+ /* set out-FIFO threshold to 0x100 */
+ writew(0x100, chan + ADMA_FIFO_OUT);
+
+ /* set CPB count */
+ writew(1, chan + ADMA_CPB_COUNT);
+
+ /* read/discard ADMA status */
+ readb(chan + ADMA_STATUS);
+}
+
+static inline void adma_enter_reg_mode(struct ata_port *ap)
+{
+ void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no);
+
+ writew(aPIOMD4, chan + ADMA_CONTROL);
+ readb(chan + ADMA_STATUS); /* flush */
+}
+
+static void adma_phy_reset(struct ata_port *ap)
+{
+ struct adma_port_priv *pp = ap->private_data;
+
+ pp->state = adma_state_idle;
+ adma_reinit_engine(ap);
+ ata_port_probe(ap);
+ ata_bus_reset(ap);
+}
+
+static void adma_eng_timeout(struct ata_port *ap)
+{
+ struct adma_port_priv *pp = ap->private_data;
+
+ if (pp->state != adma_state_idle) /* healthy paranoia */
+ pp->state = adma_state_mmio;
+ adma_reinit_engine(ap);
+ ata_eng_timeout(ap);
+}
+
+static int adma_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct scatterlist *sg = qc->sg;
+ struct ata_port *ap = qc->ap;
+ struct adma_port_priv *pp = ap->private_data;
+ u8 *buf = pp->pkt;
+ int nelem, i = (2 + buf[3]) * 8;
+ u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0);
+
+ for (nelem = 0; nelem < qc->n_elem; nelem++,sg++) {
+ u32 addr;
+ u32 len;
+
+ addr = (u32)sg_dma_address(sg);
+ *(__le32 *)(buf + i) = cpu_to_le32(addr);
+ i += 4;
+
+ len = sg_dma_len(sg) >> 3;
+ *(__le32 *)(buf + i) = cpu_to_le32(len);
+ i += 4;
+
+ if ((nelem + 1) == qc->n_elem)
+ pFLAGS |= pEND;
+ buf[i++] = pFLAGS;
+ buf[i++] = qc->dev->dma_mode & 0xf;
+ buf[i++] = 0; /* pPKLW */
+ buf[i++] = 0; /* reserved */
+
+ *(__le32 *)(buf + i)
+ = (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4);
+ i += 4;
+
+ VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", nelem,
+ (unsigned long)addr, len);
+ }
+ return i;
+}
+
+static void adma_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct adma_port_priv *pp = qc->ap->private_data;
+ u8 *buf = pp->pkt;
+ u32 pkt_dma = (u32)pp->pkt_dma;
+ int i = 0;
+
+ VPRINTK("ENTER\n");
+
+ adma_enter_reg_mode(qc->ap);
+ if (qc->tf.protocol != ATA_PROT_DMA) {
+ ata_qc_prep(qc);
+ return;
+ }
+
+ buf[i++] = 0; /* Response flags */
+ buf[i++] = 0; /* reserved */
+ buf[i++] = cVLD | cDAT | cIEN;
+ i++; /* cLEN, gets filled in below */
+
+ *(__le32 *)(buf+i) = cpu_to_le32(pkt_dma); /* cNCPB */
+ i += 4; /* cNCPB */
+ i += 4; /* cPRD, gets filled in below */
+
+ buf[i++] = 0; /* reserved */
+ buf[i++] = 0; /* reserved */
+ buf[i++] = 0; /* reserved */
+ buf[i++] = 0; /* reserved */
+
+ /* ATA registers; must be a multiple of 4 */
+ buf[i++] = qc->tf.device;
+ buf[i++] = ADMA_REGS_DEVICE;
+ if ((qc->tf.flags & ATA_TFLAG_LBA48)) {
+ buf[i++] = qc->tf.hob_nsect;
+ buf[i++] = ADMA_REGS_SECTOR_COUNT;
+ buf[i++] = qc->tf.hob_lbal;
+ buf[i++] = ADMA_REGS_LBA_LOW;
+ buf[i++] = qc->tf.hob_lbam;
+ buf[i++] = ADMA_REGS_LBA_MID;
+ buf[i++] = qc->tf.hob_lbah;
+ buf[i++] = ADMA_REGS_LBA_HIGH;
+ }
+ buf[i++] = qc->tf.nsect;
+ buf[i++] = ADMA_REGS_SECTOR_COUNT;
+ buf[i++] = qc->tf.lbal;
+ buf[i++] = ADMA_REGS_LBA_LOW;
+ buf[i++] = qc->tf.lbam;
+ buf[i++] = ADMA_REGS_LBA_MID;
+ buf[i++] = qc->tf.lbah;
+ buf[i++] = ADMA_REGS_LBA_HIGH;
+ buf[i++] = 0;
+ buf[i++] = ADMA_REGS_CONTROL;
+ buf[i++] = rIGN;
+ buf[i++] = 0;
+ buf[i++] = qc->tf.command;
+ buf[i++] = ADMA_REGS_COMMAND | rEND;
+
+ buf[3] = (i >> 3) - 2; /* cLEN */
+ *(__le32 *)(buf+8) = cpu_to_le32(pkt_dma + i); /* cPRD */
+
+ i = adma_fill_sg(qc);
+ wmb(); /* flush PRDs and pkt to memory */
+#if 0
+ /* dump out CPB + PRDs for debug */
+ {
+ int j, len = 0;
+ static char obuf[2048];
+ for (j = 0; j < i; ++j) {
+ len += sprintf(obuf+len, "%02x ", buf[j]);
+ if ((j & 7) == 7) {
+ printk("%s\n", obuf);
+ len = 0;
+ }
+ }
+ if (len)
+ printk("%s\n", obuf);
+ }
+#endif
+}
+
+static inline void adma_packet_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no);
+
+ VPRINTK("ENTER, ap %p\n", ap);
+
+ /* fire up the ADMA engine */
+ writew(aPIOMD4 | aGO, chan + ADMA_CONTROL);
+}
+
+static int adma_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct adma_port_priv *pp = qc->ap->private_data;
+
+ switch (qc->tf.protocol) {
+ case ATA_PROT_DMA:
+ pp->state = adma_state_pkt;
+ adma_packet_start(qc);
+ return 0;
+
+ case ATA_PROT_ATAPI_DMA:
+ BUG();
+ break;
+
+ default:
+ break;
+ }
+
+ pp->state = adma_state_mmio;
+ return ata_qc_issue_prot(qc);
+}
+
+static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set)
+{
+ unsigned int handled = 0, port_no;
+ u8 __iomem *mmio_base = host_set->mmio_base;
+
+ for (port_no = 0; port_no < host_set->n_ports; ++port_no) {
+ struct ata_port *ap = host_set->ports[port_no];
+ struct adma_port_priv *pp;
+ struct ata_queued_cmd *qc;
+ void __iomem *chan = ADMA_REGS(mmio_base, port_no);
+ u8 drv_stat, status = readb(chan + ADMA_STATUS);
+
+ if (status == 0)
+ continue;
+ handled = 1;
+ adma_enter_reg_mode(ap);
+ if ((ap->flags & ATA_FLAG_PORT_DISABLED))
+ continue;
+ pp = ap->private_data;
+ if (!pp || pp->state != adma_state_pkt)
+ continue;
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ drv_stat = 0;
+ if ((status & (aPERR | aPSD | aUIRQ)))
+ drv_stat = ATA_ERR;
+ else if (pp->pkt[0] != cDONE)
+ drv_stat = ATA_ERR;
+ ata_qc_complete(qc, drv_stat);
+ }
+ return handled;
+}
+
+static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set)
+{
+ unsigned int handled = 0, port_no;
+
+ for (port_no = 0; port_no < host_set->n_ports; ++port_no) {
+ struct ata_port *ap;
+ ap = host_set->ports[port_no];
+ if (ap && (!(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))) {
+ struct ata_queued_cmd *qc;
+ struct adma_port_priv *pp = ap->private_data;
+ if (!pp || pp->state != adma_state_mmio)
+ continue;
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+
+ /* check main status, clearing INTRQ */
+ u8 status = ata_chk_status(ap);
+ if ((status & ATA_BUSY))
+ continue;
+ DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
+ ap->id, qc->tf.protocol, status);
+
+ /* complete taskfile transaction */
+ pp->state = adma_state_idle;
+ ata_qc_complete(qc, status);
+ handled = 1;
+ }
+ }
+ }
+ return handled;
+}
+
+static irqreturn_t adma_intr(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ata_host_set *host_set = dev_instance;
+ unsigned int handled = 0;
+
+ VPRINTK("ENTER\n");
+
+ spin_lock(&host_set->lock);
+ handled = adma_intr_pkt(host_set) | adma_intr_mmio(host_set);
+ spin_unlock(&host_set->lock);
+
+ VPRINTK("EXIT\n");
+
+ return IRQ_RETVAL(handled);
+}
+
+static void adma_ata_setup_port(struct ata_ioports *port, unsigned long base)
+{
+ port->cmd_addr =
+ port->data_addr = base + 0x000;
+ port->error_addr =
+ port->feature_addr = base + 0x004;
+ port->nsect_addr = base + 0x008;
+ port->lbal_addr = base + 0x00c;
+ port->lbam_addr = base + 0x010;
+ port->lbah_addr = base + 0x014;
+ port->device_addr = base + 0x018;
+ port->status_addr =
+ port->command_addr = base + 0x01c;
+ port->altstatus_addr =
+ port->ctl_addr = base + 0x038;
+}
+
+static int adma_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct adma_port_priv *pp;
+ int rc;
+
+ rc = ata_port_start(ap);
+ if (rc)
+ return rc;
+ adma_enter_reg_mode(ap);
+ rc = -ENOMEM;
+ pp = kcalloc(1, sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ goto err_out;
+ pp->pkt = dma_alloc_coherent(dev, ADMA_PKT_BYTES, &pp->pkt_dma,
+ GFP_KERNEL);
+ if (!pp->pkt)
+ goto err_out_kfree;
+ /* paranoia? */
+ if ((pp->pkt_dma & 7) != 0) {
+ printk("bad alignment for pp->pkt_dma: %08x\n",
+ (u32)pp->pkt_dma);
+ goto err_out_kfree2;
+ }
+ memset(pp->pkt, 0, ADMA_PKT_BYTES);
+ ap->private_data = pp;
+ adma_reinit_engine(ap);
+ return 0;
+
+err_out_kfree2:
+ kfree(pp);
+err_out_kfree:
+ kfree(pp);
+err_out:
+ ata_port_stop(ap);
+ return rc;
+}
+
+static void adma_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct adma_port_priv *pp = ap->private_data;
+
+ adma_reset_engine(ADMA_REGS(ap->host_set->mmio_base, ap->port_no));
+ if (pp != NULL) {
+ ap->private_data = NULL;
+ if (pp->pkt != NULL)
+ dma_free_coherent(dev, ADMA_PKT_BYTES,
+ pp->pkt, pp->pkt_dma);
+ kfree(pp);
+ }
+ ata_port_stop(ap);
+}
+
+static void adma_host_stop(struct ata_host_set *host_set)
+{
+ unsigned int port_no;
+
+ for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
+ adma_reset_engine(ADMA_REGS(host_set->mmio_base, port_no));
+
+ ata_pci_host_stop(host_set);
+}
+
+static void adma_host_init(unsigned int chip_id,
+ struct ata_probe_ent *probe_ent)
+{
+ unsigned int port_no;
+ void __iomem *mmio_base = probe_ent->mmio_base;
+
+ /* enable/lock aGO operation */
+ writeb(7, mmio_base + ADMA_MODE_LOCK);
+
+ /* reset the ADMA logic */
+ for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
+ adma_reset_engine(ADMA_REGS(mmio_base, port_no));
+}
+
+static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
+{
+ int rc;
+
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ printk(KERN_ERR DRV_NAME
+ "(%s): 32-bit DMA enable failed\n",
+ pci_name(pdev));
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ printk(KERN_ERR DRV_NAME
+ "(%s): 32-bit consistent DMA enable failed\n",
+ pci_name(pdev));
+ return rc;
+ }
+ return 0;
+}
+
+static int adma_ata_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int printed_version;
+ struct ata_probe_ent *probe_ent = NULL;
+ void __iomem *mmio_base;
+ unsigned int board_idx = (unsigned int) ent->driver_data;
+ int rc, port_no;
+
+ if (!printed_version++)
+ printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out;
+
+ if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) {
+ rc = -ENODEV;
+ goto err_out_regions;
+ }
+
+ mmio_base = pci_iomap(pdev, 4, 0);
+ if (mmio_base == NULL) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ rc = adma_set_dma_masks(pdev, mmio_base);
+ if (rc)
+ goto err_out_iounmap;
+
+ probe_ent = kcalloc(1, sizeof(*probe_ent), GFP_KERNEL);
+ if (probe_ent == NULL) {
+ rc = -ENOMEM;
+ goto err_out_iounmap;
+ }
+
+ probe_ent->dev = pci_dev_to_dev(pdev);
+ INIT_LIST_HEAD(&probe_ent->node);
+
+ probe_ent->sht = adma_port_info[board_idx].sht;
+ probe_ent->host_flags = adma_port_info[board_idx].host_flags;
+ probe_ent->pio_mask = adma_port_info[board_idx].pio_mask;
+ probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask;
+ probe_ent->udma_mask = adma_port_info[board_idx].udma_mask;
+ probe_ent->port_ops = adma_port_info[board_idx].port_ops;
+
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->mmio_base = mmio_base;
+ probe_ent->n_ports = ADMA_PORTS;
+
+ for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) {
+ adma_ata_setup_port(&probe_ent->port[port_no],
+ ADMA_ATA_REGS((unsigned long)mmio_base, port_no));
+ }
+
+ pci_set_master(pdev);
+
+ /* initialize adapter */
+ adma_host_init(board_idx, probe_ent);
+
+ rc = ata_device_add(probe_ent);
+ kfree(probe_ent);
+ if (rc != ADMA_PORTS)
+ goto err_out_iounmap;
+ return 0;
+
+err_out_iounmap:
+ pci_iounmap(pdev, mmio_base);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out:
+ pci_disable_device(pdev);
+ return rc;
+}
+
+static int __init adma_ata_init(void)
+{
+ return pci_module_init(&adma_ata_pci_driver);
+}
+
+static void __exit adma_ata_exit(void)
+{
+ pci_unregister_driver(&adma_ata_pci_driver);
+}
+
+MODULE_AUTHOR("Mark Lord");
+MODULE_DESCRIPTION("Pacific Digital Corporation ADMA low-level driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, adma_ata_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(adma_ata_init);
+module_exit(adma_ata_exit);
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index ea76fe4..422e0b6 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -35,7 +35,7 @@
#include <asm/io.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.12"
+#define DRV_VERSION "0.25"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -55,31 +55,61 @@
MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */
MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ,
- MV_Q_CT = 32,
- MV_CRQB_SZ = 32,
- MV_CRPB_SZ = 8,
+ MV_USE_Q_DEPTH = ATA_DEF_QUEUE,
- MV_DMA_BOUNDARY = 0xffffffffU,
- SATAHC_MASK = (~(MV_SATAHC_REG_SZ - 1)),
+ MV_MAX_Q_DEPTH = 32,
+ MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1,
+
+ /* CRQB needs alignment on a 1KB boundary. Size == 1KB
+ * CRPB needs alignment on a 256B boundary. Size == 256B
+ * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB
+ * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B
+ */
+ MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH),
+ MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH),
+ MV_MAX_SG_CT = 176,
+ MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT),
+ MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ),
+
+ /* Our DMA boundary is determined by an ePRD being unable to handle
+ * anything larger than 64KB
+ */
+ MV_DMA_BOUNDARY = 0xffffU,
MV_PORTS_PER_HC = 4,
/* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */
MV_PORT_HC_SHIFT = 2,
- /* == (port % MV_PORTS_PER_HC) to determine port from 0-7 port */
+ /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */
MV_PORT_MASK = 3,
/* Host Flags */
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
- MV_FLAG_BDMA = (1 << 28), /* Basic DMA */
+ MV_FLAG_GLBL_SFT_RST = (1 << 28), /* Global Soft Reset support */
+ MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO),
+ MV_6XXX_FLAGS = (MV_FLAG_IRQ_COALESCE |
+ MV_FLAG_GLBL_SFT_RST),
chip_504x = 0,
chip_508x = 1,
chip_604x = 2,
chip_608x = 3,
+ CRQB_FLAG_READ = (1 << 0),
+ CRQB_TAG_SHIFT = 1,
+ CRQB_CMD_ADDR_SHIFT = 8,
+ CRQB_CMD_CS = (0x2 << 11),
+ CRQB_CMD_LAST = (1 << 15),
+
+ CRPB_FLAG_STATUS_SHIFT = 8,
+
+ EPRD_FLAG_END_OF_TBL = (1 << 31),
+
/* PCI interface registers */
+ PCI_COMMAND_OFS = 0xc00,
+
PCI_MAIN_CMD_STS_OFS = 0xd30,
STOP_PCI_MASTER = (1 << 2),
PCI_MASTER_EMPTY = (1 << 3),
@@ -111,20 +141,13 @@
HC_CFG_OFS = 0,
HC_IRQ_CAUSE_OFS = 0x14,
- CRBP_DMA_DONE = (1 << 0), /* shift by port # */
+ CRPB_DMA_DONE = (1 << 0), /* shift by port # */
HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */
DEV_IRQ = (1 << 8), /* shift by port # */
/* Shadow block registers */
- SHD_PIO_DATA_OFS = 0x100,
- SHD_FEA_ERR_OFS = 0x104,
- SHD_SECT_CNT_OFS = 0x108,
- SHD_LBA_L_OFS = 0x10C,
- SHD_LBA_M_OFS = 0x110,
- SHD_LBA_H_OFS = 0x114,
- SHD_DEV_HD_OFS = 0x118,
- SHD_CMD_STA_OFS = 0x11C,
- SHD_CTL_AST_OFS = 0x120,
+ SHD_BLK_OFS = 0x100,
+ SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */
/* SATA registers */
SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
@@ -132,6 +155,11 @@
/* Port registers */
EDMA_CFG_OFS = 0,
+ EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */
+ EDMA_CFG_NCQ = (1 << 5),
+ EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
+ EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
+ EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
EDMA_ERR_IRQ_CAUSE_OFS = 0x8,
EDMA_ERR_IRQ_MASK_OFS = 0xc,
@@ -161,33 +189,85 @@
EDMA_ERR_LNK_DATA_TX |
EDMA_ERR_TRANS_PROTO),
+ EDMA_REQ_Q_BASE_HI_OFS = 0x10,
+ EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */
+ EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
+
+ EDMA_REQ_Q_OUT_PTR_OFS = 0x18,
+ EDMA_REQ_Q_PTR_SHIFT = 5,
+
+ EDMA_RSP_Q_BASE_HI_OFS = 0x1c,
+ EDMA_RSP_Q_IN_PTR_OFS = 0x20,
+ EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */
+ EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U,
+ EDMA_RSP_Q_PTR_SHIFT = 3,
+
EDMA_CMD_OFS = 0x28,
EDMA_EN = (1 << 0),
EDMA_DS = (1 << 1),
ATA_RST = (1 << 2),
- /* BDMA is 6xxx part only */
- BDMA_CMD_OFS = 0x224,
- BDMA_START = (1 << 0),
+ /* Host private flags (hp_flags) */
+ MV_HP_FLAG_MSI = (1 << 0),
- MV_UNDEF = 0,
+ /* Port private flags (pp_flags) */
+ MV_PP_FLAG_EDMA_EN = (1 << 0),
+ MV_PP_FLAG_EDMA_DS_ACT = (1 << 1),
+};
+
+/* Command ReQuest Block: 32B */
+struct mv_crqb {
+ u32 sg_addr;
+ u32 sg_addr_hi;
+ u16 ctrl_flags;
+ u16 ata_cmd[11];
+};
+
+/* Command ResPonse Block: 8B */
+struct mv_crpb {
+ u16 id;
+ u16 flags;
+ u32 tmstmp;
+};
+
+/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */
+struct mv_sg {
+ u32 addr;
+ u32 flags_size;
+ u32 addr_hi;
+ u32 reserved;
};
struct mv_port_priv {
+ struct mv_crqb *crqb;
+ dma_addr_t crqb_dma;
+ struct mv_crpb *crpb;
+ dma_addr_t crpb_dma;
+ struct mv_sg *sg_tbl;
+ dma_addr_t sg_tbl_dma;
+ unsigned req_producer; /* cp of req_in_ptr */
+ unsigned rsp_consumer; /* cp of rsp_out_ptr */
+ u32 pp_flags;
};
struct mv_host_priv {
-
+ u32 hp_flags;
};
static void mv_irq_clear(struct ata_port *ap);
static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
+static u8 mv_check_err(struct ata_port *ap);
static void mv_phy_reset(struct ata_port *ap);
-static int mv_master_reset(void __iomem *mmio_base);
+static void mv_host_stop(struct ata_host_set *host_set);
+static int mv_port_start(struct ata_port *ap);
+static void mv_port_stop(struct ata_port *ap);
+static void mv_qc_prep(struct ata_queued_cmd *qc);
+static int mv_qc_issue(struct ata_queued_cmd *qc);
static irqreturn_t mv_interrupt(int irq, void *dev_instance,
struct pt_regs *regs);
+static void mv_eng_timeout(struct ata_port *ap);
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static Scsi_Host_Template mv_sht = {
@@ -196,13 +276,13 @@
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.eh_strategy_handler = ata_scsi_error,
- .can_queue = ATA_DEF_QUEUE,
+ .can_queue = MV_USE_Q_DEPTH,
.this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = MV_UNDEF,
+ .sg_tablesize = MV_MAX_SG_CT,
.max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
- .use_clustering = MV_UNDEF,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = MV_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
@@ -210,21 +290,22 @@
.ordered_flush = 1,
};
-static struct ata_port_operations mv_ops = {
+static const struct ata_port_operations mv_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
+ .check_err = mv_check_err,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.phy_reset = mv_phy_reset,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
+ .qc_prep = mv_qc_prep,
+ .qc_issue = mv_qc_issue,
- .eng_timeout = ata_eng_timeout,
+ .eng_timeout = mv_eng_timeout,
.irq_handler = mv_interrupt,
.irq_clear = mv_irq_clear,
@@ -232,46 +313,39 @@
.scr_read = mv_scr_read,
.scr_write = mv_scr_write,
- .port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = ata_host_stop,
+ .port_start = mv_port_start,
+ .port_stop = mv_port_stop,
+ .host_stop = mv_host_stop,
};
static struct ata_port_info mv_port_info[] = {
{ /* chip_504x */
.sht = &mv_sht,
- .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO),
- .pio_mask = 0x1f, /* pio4-0 */
- .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */
+ .host_flags = MV_COMMON_FLAGS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */
.port_ops = &mv_ops,
},
{ /* chip_508x */
.sht = &mv_sht,
- .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- MV_FLAG_DUAL_HC),
- .pio_mask = 0x1f, /* pio4-0 */
- .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */
+ .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */
.port_ops = &mv_ops,
},
{ /* chip_604x */
.sht = &mv_sht,
- .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- MV_FLAG_IRQ_COALESCE | MV_FLAG_BDMA),
- .pio_mask = 0x1f, /* pio4-0 */
- .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */
+ .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 */
.port_ops = &mv_ops,
},
{ /* chip_608x */
.sht = &mv_sht,
- .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- MV_FLAG_IRQ_COALESCE | MV_FLAG_DUAL_HC |
- MV_FLAG_BDMA),
- .pio_mask = 0x1f, /* pio4-0 */
- .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */
+ .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ MV_FLAG_DUAL_HC),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 */
.port_ops = &mv_ops,
},
};
@@ -306,12 +380,6 @@
(void) readl(addr); /* flush to avoid PCI posted write */
}
-static inline void __iomem *mv_port_addr_to_hc_base(void __iomem *port_mmio)
-{
- return ((void __iomem *)((unsigned long)port_mmio &
- (unsigned long)SATAHC_MASK));
-}
-
static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc)
{
return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
@@ -329,26 +397,152 @@
return mv_port_base(ap->host_set->mmio_base, ap->port_no);
}
-static inline int mv_get_hc_count(unsigned long flags)
+static inline int mv_get_hc_count(unsigned long hp_flags)
{
- return ((flags & MV_FLAG_DUAL_HC) ? 2 : 1);
-}
-
-static inline int mv_is_edma_active(struct ata_port *ap)
-{
- void __iomem *port_mmio = mv_ap_base(ap);
- return (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS));
-}
-
-static inline int mv_port_bdma_capable(struct ata_port *ap)
-{
- return (ap->flags & MV_FLAG_BDMA);
+ return ((hp_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
}
static void mv_irq_clear(struct ata_port *ap)
{
}
+/**
+ * mv_start_dma - Enable eDMA engine
+ * @base: port base address
+ * @pp: port private data
+ *
+ * Verify the local cache of the eDMA state is accurate with an
+ * assert.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp)
+{
+ if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) {
+ writelfl(EDMA_EN, base + EDMA_CMD_OFS);
+ pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
+ }
+ assert(EDMA_EN & readl(base + EDMA_CMD_OFS));
+}
+
+/**
+ * mv_stop_dma - Disable eDMA engine
+ * @ap: ATA channel to manipulate
+ *
+ * Verify the local cache of the eDMA state is accurate with an
+ * assert.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_stop_dma(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
+ u32 reg;
+ int i;
+
+ if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) {
+ /* Disable EDMA if active. The disable bit auto clears.
+ */
+ writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ } else {
+ assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)));
+ }
+
+ /* now properly wait for the eDMA to stop */
+ for (i = 1000; i > 0; i--) {
+ reg = readl(port_mmio + EDMA_CMD_OFS);
+ if (!(EDMA_EN & reg)) {
+ break;
+ }
+ udelay(100);
+ }
+
+ if (EDMA_EN & reg) {
+ printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id);
+ /* FIXME: Consider doing a reset here to recover */
+ }
+}
+
+#ifdef ATA_DEBUG
+static void mv_dump_mem(void __iomem *start, unsigned bytes)
+{
+ int b, w;
+ for (b = 0; b < bytes; ) {
+ DPRINTK("%p: ", start + b);
+ for (w = 0; b < bytes && w < 4; w++) {
+ printk("%08x ",readl(start + b));
+ b += sizeof(u32);
+ }
+ printk("\n");
+ }
+}
+#endif
+
+static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes)
+{
+#ifdef ATA_DEBUG
+ int b, w;
+ u32 dw;
+ for (b = 0; b < bytes; ) {
+ DPRINTK("%02x: ", b);
+ for (w = 0; b < bytes && w < 4; w++) {
+ (void) pci_read_config_dword(pdev,b,&dw);
+ printk("%08x ",dw);
+ b += sizeof(u32);
+ }
+ printk("\n");
+ }
+#endif
+}
+static void mv_dump_all_regs(void __iomem *mmio_base, int port,
+ struct pci_dev *pdev)
+{
+#ifdef ATA_DEBUG
+ void __iomem *hc_base = mv_hc_base(mmio_base,
+ port >> MV_PORT_HC_SHIFT);
+ void __iomem *port_base;
+ int start_port, num_ports, p, start_hc, num_hcs, hc;
+
+ if (0 > port) {
+ start_hc = start_port = 0;
+ num_ports = 8; /* shld be benign for 4 port devs */
+ num_hcs = 2;
+ } else {
+ start_hc = port >> MV_PORT_HC_SHIFT;
+ start_port = port;
+ num_ports = num_hcs = 1;
+ }
+ DPRINTK("All registers for port(s) %u-%u:\n", start_port,
+ num_ports > 1 ? num_ports - 1 : start_port);
+
+ if (NULL != pdev) {
+ DPRINTK("PCI config space regs:\n");
+ mv_dump_pci_cfg(pdev, 0x68);
+ }
+ DPRINTK("PCI regs:\n");
+ mv_dump_mem(mmio_base+0xc00, 0x3c);
+ mv_dump_mem(mmio_base+0xd00, 0x34);
+ mv_dump_mem(mmio_base+0xf00, 0x4);
+ mv_dump_mem(mmio_base+0x1d00, 0x6c);
+ for (hc = start_hc; hc < start_hc + num_hcs; hc++) {
+ hc_base = mv_hc_base(mmio_base, port >> MV_PORT_HC_SHIFT);
+ DPRINTK("HC regs (HC %i):\n", hc);
+ mv_dump_mem(hc_base, 0x1c);
+ }
+ for (p = start_port; p < start_port + num_ports; p++) {
+ port_base = mv_port_base(mmio_base, p);
+ DPRINTK("EDMA regs (port %i):\n",p);
+ mv_dump_mem(port_base, 0x54);
+ DPRINTK("SATA regs (port %i):\n",p);
+ mv_dump_mem(port_base+0x300, 0x60);
+ }
+#endif
+}
+
static unsigned int mv_scr_offset(unsigned int sc_reg_in)
{
unsigned int ofs;
@@ -389,30 +583,37 @@
}
}
-static int mv_master_reset(void __iomem *mmio_base)
+/**
+ * mv_global_soft_reset - Perform the 6xxx global soft reset
+ * @mmio_base: base address of the HBA
+ *
+ * This routine only applies to 6xxx parts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_global_soft_reset(void __iomem *mmio_base)
{
void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS;
int i, rc = 0;
u32 t;
- VPRINTK("ENTER\n");
-
/* Following procedure defined in PCI "main command and status
* register" table.
*/
t = readl(reg);
writel(t | STOP_PCI_MASTER, reg);
- for (i = 0; i < 100; i++) {
- msleep(10);
+ for (i = 0; i < 1000; i++) {
+ udelay(1);
t = readl(reg);
if (PCI_MASTER_EMPTY & t) {
break;
}
}
if (!(PCI_MASTER_EMPTY & t)) {
- printk(KERN_ERR DRV_NAME "PCI master won't flush\n");
- rc = 1; /* broken HW? */
+ printk(KERN_ERR DRV_NAME ": PCI master won't flush\n");
+ rc = 1;
goto done;
}
@@ -425,48 +626,412 @@
} while (!(GLOB_SFT_RST & t) && (i-- > 0));
if (!(GLOB_SFT_RST & t)) {
- printk(KERN_ERR DRV_NAME "can't set global reset\n");
- rc = 1; /* broken HW? */
+ printk(KERN_ERR DRV_NAME ": can't set global reset\n");
+ rc = 1;
goto done;
}
- /* clear reset */
+ /* clear reset and *reenable the PCI master* (not mentioned in spec) */
i = 5;
do {
- writel(t & ~GLOB_SFT_RST, reg);
+ writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg);
t = readl(reg);
udelay(1);
} while ((GLOB_SFT_RST & t) && (i-- > 0));
if (GLOB_SFT_RST & t) {
- printk(KERN_ERR DRV_NAME "can't clear global reset\n");
- rc = 1; /* broken HW? */
+ printk(KERN_ERR DRV_NAME ": can't clear global reset\n");
+ rc = 1;
}
-
- done:
- VPRINTK("EXIT, rc = %i\n", rc);
+done:
return rc;
}
+/**
+ * mv_host_stop - Host specific cleanup/stop routine.
+ * @host_set: host data structure
+ *
+ * Disable ints, cleanup host memory, call general purpose
+ * host_stop.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_host_stop(struct ata_host_set *host_set)
+{
+ struct mv_host_priv *hpriv = host_set->private_data;
+ struct pci_dev *pdev = to_pci_dev(host_set->dev);
+
+ if (hpriv->hp_flags & MV_HP_FLAG_MSI) {
+ pci_disable_msi(pdev);
+ } else {
+ pci_intx(pdev, 0);
+ }
+ kfree(hpriv);
+ ata_host_stop(host_set);
+}
+
+/**
+ * mv_port_start - Port specific init/start routine.
+ * @ap: ATA channel to manipulate
+ *
+ * Allocate and point to DMA memory, init port private memory,
+ * zero indices.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct mv_port_priv *pp;
+ void __iomem *port_mmio = mv_ap_base(ap);
+ void *mem;
+ dma_addr_t mem_dma;
+
+ pp = kmalloc(sizeof(*pp), GFP_KERNEL);
+ if (!pp) {
+ return -ENOMEM;
+ }
+ memset(pp, 0, sizeof(*pp));
+
+ mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma,
+ GFP_KERNEL);
+ if (!mem) {
+ kfree(pp);
+ return -ENOMEM;
+ }
+ memset(mem, 0, MV_PORT_PRIV_DMA_SZ);
+
+ /* First item in chunk of DMA memory:
+ * 32-slot command request table (CRQB), 32 bytes each in size
+ */
+ pp->crqb = mem;
+ pp->crqb_dma = mem_dma;
+ mem += MV_CRQB_Q_SZ;
+ mem_dma += MV_CRQB_Q_SZ;
+
+ /* Second item:
+ * 32-slot command response table (CRPB), 8 bytes each in size
+ */
+ pp->crpb = mem;
+ pp->crpb_dma = mem_dma;
+ mem += MV_CRPB_Q_SZ;
+ mem_dma += MV_CRPB_Q_SZ;
+
+ /* Third item:
+ * Table of scatter-gather descriptors (ePRD), 16 bytes each
+ */
+ pp->sg_tbl = mem;
+ pp->sg_tbl_dma = mem_dma;
+
+ writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT |
+ EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS);
+
+ writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
+ writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
+ port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+
+ writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+ writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+
+ writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
+ writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
+ port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+
+ pp->req_producer = pp->rsp_consumer = 0;
+
+ /* Don't turn on EDMA here...do it before DMA commands only. Else
+ * we'll be unable to send non-data, PIO, etc due to restricted access
+ * to shadow regs.
+ */
+ ap->private_data = pp;
+ return 0;
+}
+
+/**
+ * mv_port_stop - Port specific cleanup/stop routine.
+ * @ap: ATA channel to manipulate
+ *
+ * Stop DMA, cleanup port memory.
+ *
+ * LOCKING:
+ * This routine uses the host_set lock to protect the DMA stop.
+ */
+static void mv_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct mv_port_priv *pp = ap->private_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ mv_stop_dma(ap);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ ap->private_data = NULL;
+ dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma);
+ kfree(pp);
+}
+
+/**
+ * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries
+ * @qc: queued command whose SG list to source from
+ *
+ * Populate the SG list and mark the last entry.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct mv_port_priv *pp = qc->ap->private_data;
+ unsigned int i;
+
+ for (i = 0; i < qc->n_elem; i++) {
+ u32 sg_len;
+ dma_addr_t addr;
+
+ addr = sg_dma_address(&qc->sg[i]);
+ sg_len = sg_dma_len(&qc->sg[i]);
+
+ pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff);
+ pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ assert(0 == (sg_len & ~MV_DMA_BOUNDARY));
+ pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len);
+ }
+ if (0 < qc->n_elem) {
+ pp->sg_tbl[qc->n_elem - 1].flags_size |=
+ cpu_to_le32(EPRD_FLAG_END_OF_TBL);
+ }
+}
+
+static inline unsigned mv_inc_q_index(unsigned *index)
+{
+ *index = (*index + 1) & MV_MAX_Q_DEPTH_MASK;
+ return *index;
+}
+
+static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last)
+{
+ *cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
+ (last ? CRQB_CMD_LAST : 0);
+}
+
+/**
+ * mv_qc_prep - Host specific command preparation.
+ * @qc: queued command to prepare
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it handles prep of the CRQB
+ * (command request block), does some sanity checking, and calls
+ * the SG load routine.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct mv_port_priv *pp = ap->private_data;
+ u16 *cw;
+ struct ata_taskfile *tf;
+ u16 flags = 0;
+
+ if (ATA_PROT_DMA != qc->tf.protocol) {
+ return;
+ }
+
+ /* the req producer index should be the same as we remember it */
+ assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
+ EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ pp->req_producer);
+
+ /* Fill in command request block
+ */
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
+ flags |= CRQB_FLAG_READ;
+ }
+ assert(MV_MAX_Q_DEPTH > qc->tag);
+ flags |= qc->tag << CRQB_TAG_SHIFT;
+
+ pp->crqb[pp->req_producer].sg_addr =
+ cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
+ pp->crqb[pp->req_producer].sg_addr_hi =
+ cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+ pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags);
+
+ cw = &pp->crqb[pp->req_producer].ata_cmd[0];
+ tf = &qc->tf;
+
+ /* Sadly, the CRQB cannot accomodate all registers--there are
+ * only 11 bytes...so we must pick and choose required
+ * registers based on the command. So, we drop feature and
+ * hob_feature for [RW] DMA commands, but they are needed for
+ * NCQ. NCQ will drop hob_nsect.
+ */
+ switch (tf->command) {
+ case ATA_CMD_READ:
+ case ATA_CMD_READ_EXT:
+ case ATA_CMD_WRITE:
+ case ATA_CMD_WRITE_EXT:
+ mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0);
+ break;
+#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */
+ case ATA_CMD_FPDMA_READ:
+ case ATA_CMD_FPDMA_WRITE:
+ mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0);
+ mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0);
+ break;
+#endif /* FIXME: remove this line when NCQ added */
+ default:
+ /* The only other commands EDMA supports in non-queued and
+ * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
+ * of which are defined/used by Linux. If we get here, this
+ * driver needs work.
+ *
+ * FIXME: modify libata to give qc_prep a return value and
+ * return error here.
+ */
+ BUG_ON(tf->command);
+ break;
+ }
+ mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0);
+ mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0);
+ mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0);
+ mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0);
+ mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0);
+ mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0);
+ mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0);
+ mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0);
+ mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP)) {
+ return;
+ }
+ mv_fill_sg(qc);
+}
+
+/**
+ * mv_qc_issue - Initiate a command to the host
+ * @qc: queued command to start
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it sanity checks our local
+ * caches of the request producer/consumer indices then enables
+ * DMA and bumps the request producer index.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_qc_issue(struct ata_queued_cmd *qc)
+{
+ void __iomem *port_mmio = mv_ap_base(qc->ap);
+ struct mv_port_priv *pp = qc->ap->private_data;
+ u32 in_ptr;
+
+ if (ATA_PROT_DMA != qc->tf.protocol) {
+ /* We're about to send a non-EDMA capable command to the
+ * port. Turn off EDMA so there won't be problems accessing
+ * shadow block, etc registers.
+ */
+ mv_stop_dma(qc->ap);
+ return ata_qc_issue_prot(qc);
+ }
+
+ in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+
+ /* the req producer index should be the same as we remember it */
+ assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ pp->req_producer);
+ /* until we do queuing, the queue should be empty at this point */
+ assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
+ EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+
+ mv_inc_q_index(&pp->req_producer); /* now incr producer index */
+
+ mv_start_dma(port_mmio, pp);
+
+ /* and write the request in pointer to kick the EDMA to life */
+ in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
+ in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT;
+ writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+
+ return 0;
+}
+
+/**
+ * mv_get_crpb_status - get status from most recently completed cmd
+ * @ap: ATA channel to manipulate
+ *
+ * This routine is for use when the port is in DMA mode, when it
+ * will be using the CRPB (command response block) method of
+ * returning command completion information. We assert indices
+ * are good, grab status, and bump the response consumer index to
+ * prove that we're up to date.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 mv_get_crpb_status(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
+ u32 out_ptr;
+
+ out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+
+ /* the response consumer index should be the same as we remember it */
+ assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ pp->rsp_consumer);
+
+ /* increment our consumer index... */
+ pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
+
+ /* and, until we do NCQ, there should only be 1 CRPB waiting */
+ assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
+ EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
+ pp->rsp_consumer);
+
+ /* write out our inc'd consumer index so EDMA knows we're caught up */
+ out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
+ out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT;
+ writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+
+ /* Return ATA status register for completed CRPB */
+ return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT);
+}
+
+/**
+ * mv_err_intr - Handle error interrupts on the port
+ * @ap: ATA channel to manipulate
+ *
+ * In most cases, just clear the interrupt and move on. However,
+ * some cases require an eDMA reset, which is done right before
+ * the COMRESET in mv_phy_reset(). The SERR case requires a
+ * clear of pending errors in the SATA SERROR register. Finally,
+ * if the port disabled DMA, update our cached copy to match.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static void mv_err_intr(struct ata_port *ap)
{
- void __iomem *port_mmio;
+ void __iomem *port_mmio = mv_ap_base(ap);
u32 edma_err_cause, serr = 0;
- /* bug here b/c we got an err int on a port we don't know about,
- * so there's no way to clear it
- */
- BUG_ON(NULL == ap);
- port_mmio = mv_ap_base(ap);
-
edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
if (EDMA_ERR_SERR & edma_err_cause) {
serr = scr_read(ap, SCR_ERROR);
scr_write_flush(ap, SCR_ERROR, serr);
}
- DPRINTK("port %u error; EDMA err cause: 0x%08x SERR: 0x%08x\n",
- ap->port_no, edma_err_cause, serr);
+ if (EDMA_ERR_SELF_DIS & edma_err_cause) {
+ struct mv_port_priv *pp = ap->private_data;
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ }
+ DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x "
+ "SERR: 0x%08x\n", ap->id, edma_err_cause, serr);
/* Clear EDMA now that SERR cleanup done */
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
@@ -477,7 +1042,21 @@
}
}
-/* Handle any outstanding interrupts in a single SATAHC
+/**
+ * mv_host_intr - Handle all interrupts on the given host controller
+ * @host_set: host specific structure
+ * @relevant: port error bits relevant to this host controller
+ * @hc: which host controller we're to look at
+ *
+ * Read then write clear the HC interrupt status then walk each
+ * port connected to the HC and see if it needs servicing. Port
+ * success ints are reported in the HC interrupt status reg, the
+ * port error ints are reported in the higher level main
+ * interrupt status register and thus are passed in via the
+ * 'relevant' argument.
+ *
+ * LOCKING:
+ * Inherited from caller.
*/
static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
unsigned int hc)
@@ -487,8 +1066,8 @@
struct ata_port *ap;
struct ata_queued_cmd *qc;
u32 hc_irq_cause;
- int shift, port, port0, hard_port;
- u8 ata_status;
+ int shift, port, port0, hard_port, handled;
+ u8 ata_status = 0;
if (hc == 0) {
port0 = 0;
@@ -499,7 +1078,7 @@
/* we'll need the HC success int register in most cases */
hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
if (hc_irq_cause) {
- writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
+ writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
}
VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n",
@@ -508,35 +1087,38 @@
for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
ap = host_set->ports[port];
hard_port = port & MV_PORT_MASK; /* range 0-3 */
- ata_status = 0xffU;
+ handled = 0; /* ensure ata_status is set if handled++ */
- if (((CRBP_DMA_DONE | DEV_IRQ) << hard_port) & hc_irq_cause) {
- BUG_ON(NULL == ap);
- /* rcv'd new resp, basic DMA complete, or ATA IRQ */
- /* This is needed to clear the ATA INTRQ.
- * FIXME: don't read the status reg in EDMA mode!
+ if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
+ /* new CRPB on the queue; just one at a time until NCQ
+ */
+ ata_status = mv_get_crpb_status(ap);
+ handled++;
+ } else if ((DEV_IRQ << hard_port) & hc_irq_cause) {
+ /* received ATA IRQ; read the status reg to clear INTRQ
*/
ata_status = readb((void __iomem *)
ap->ioaddr.status_addr);
+ handled++;
}
- shift = port * 2;
+ shift = port << 1; /* (port * 2) */
if (port >= MV_PORTS_PER_HC) {
shift++; /* skip bit 8 in the HC Main IRQ reg */
}
if ((PORT0_ERR << shift) & relevant) {
mv_err_intr(ap);
- /* FIXME: smart to OR in ATA_ERR? */
+ /* OR in ATA_ERR to ensure libata knows we took one */
ata_status = readb((void __iomem *)
ap->ioaddr.status_addr) | ATA_ERR;
+ handled++;
}
- if (ap) {
+ if (handled && ap) {
qc = ata_qc_from_tag(ap, ap->active_tag);
if (NULL != qc) {
VPRINTK("port %u IRQ found for qc, "
"ata_status 0x%x\n", port,ata_status);
- BUG_ON(0xffU == ata_status);
/* mark qc status appropriately */
ata_qc_complete(qc, ata_status);
}
@@ -545,17 +1127,30 @@
VPRINTK("EXIT\n");
}
+/**
+ * mv_interrupt -
+ * @irq: unused
+ * @dev_instance: private data; in this case the host structure
+ * @regs: unused
+ *
+ * Read the read only register to determine if any host
+ * controllers have pending interrupts. If so, call lower level
+ * routine to handle. Also check for PCI errors which are only
+ * reported here.
+ *
+ * LOCKING:
+ * This routine holds the host_set lock while processing pending
+ * interrupts.
+ */
static irqreturn_t mv_interrupt(int irq, void *dev_instance,
struct pt_regs *regs)
{
struct ata_host_set *host_set = dev_instance;
unsigned int hc, handled = 0, n_hcs;
- void __iomem *mmio;
+ void __iomem *mmio = host_set->mmio_base;
u32 irq_stat;
- mmio = host_set->mmio_base;
irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
- n_hcs = mv_get_hc_count(host_set->ports[0]->flags);
/* check the cases where we either have nothing pending or have read
* a bogus register value which can indicate HW removal or PCI fault
@@ -564,64 +1159,105 @@
return IRQ_NONE;
}
+ n_hcs = mv_get_hc_count(host_set->ports[0]->flags);
spin_lock(&host_set->lock);
for (hc = 0; hc < n_hcs; hc++) {
u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT));
if (relevant) {
mv_host_intr(host_set, relevant, hc);
- handled = 1;
+ handled++;
}
}
if (PCI_ERR & irq_stat) {
- /* FIXME: these are all masked by default, but still need
- * to recover from them properly.
- */
- }
+ printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
+ readl(mmio + PCI_IRQ_CAUSE_OFS));
+ DPRINTK("All regs @ PCI error\n");
+ mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev));
+
+ writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
+ handled++;
+ }
spin_unlock(&host_set->lock);
return IRQ_RETVAL(handled);
}
+/**
+ * mv_check_err - Return the error shadow register to caller.
+ * @ap: ATA channel to manipulate
+ *
+ * Marvell requires DMA to be stopped before accessing shadow
+ * registers. So we do that, then return the needed register.
+ *
+ * LOCKING:
+ * Inherited from caller. FIXME: protect mv_stop_dma with lock?
+ */
+static u8 mv_check_err(struct ata_port *ap)
+{
+ mv_stop_dma(ap); /* can't read shadow regs if DMA on */
+ return readb((void __iomem *) ap->ioaddr.error_addr);
+}
+
+/**
+ * mv_phy_reset - Perform eDMA reset followed by COMRESET
+ * @ap: ATA channel to manipulate
+ *
+ * Part of this is taken from __sata_phy_reset and modified to
+ * not sleep since this routine gets called from interrupt level.
+ *
+ * LOCKING:
+ * Inherited from caller. This is coded to safe to call at
+ * interrupt level, i.e. it does not sleep.
+ */
static void mv_phy_reset(struct ata_port *ap)
{
void __iomem *port_mmio = mv_ap_base(ap);
struct ata_taskfile tf;
struct ata_device *dev = &ap->device[0];
- u32 edma = 0, bdma;
+ unsigned long timeout;
VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio);
- edma = readl(port_mmio + EDMA_CMD_OFS);
- if (EDMA_EN & edma) {
- /* disable EDMA if active */
- edma &= ~EDMA_EN;
- writelfl(edma | EDMA_DS, port_mmio + EDMA_CMD_OFS);
- udelay(1);
- } else if (mv_port_bdma_capable(ap) &&
- (bdma = readl(port_mmio + BDMA_CMD_OFS)) & BDMA_START) {
- /* disable BDMA if active */
- writelfl(bdma & ~BDMA_START, port_mmio + BDMA_CMD_OFS);
- }
+ mv_stop_dma(ap);
- writelfl(edma | ATA_RST, port_mmio + EDMA_CMD_OFS);
+ writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
udelay(25); /* allow reset propagation */
/* Spec never mentions clearing the bit. Marvell's driver does
* clear the bit, however.
*/
- writelfl(edma & ~ATA_RST, port_mmio + EDMA_CMD_OFS);
+ writelfl(0, port_mmio + EDMA_CMD_OFS);
- VPRINTK("Done. Now calling __sata_phy_reset()\n");
+ VPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
+ "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
+ mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
/* proceed to init communications via the scr_control reg */
- __sata_phy_reset(ap);
+ scr_write_flush(ap, SCR_CONTROL, 0x301);
+ mdelay(1);
+ scr_write_flush(ap, SCR_CONTROL, 0x300);
+ timeout = jiffies + (HZ * 1);
+ do {
+ mdelay(10);
+ if ((scr_read(ap, SCR_STATUS) & 0xf) != 1)
+ break;
+ } while (time_before(jiffies, timeout));
- if (ap->flags & ATA_FLAG_PORT_DISABLED) {
- VPRINTK("Port disabled pre-sig. Exiting.\n");
+ VPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x "
+ "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
+ mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
+
+ if (sata_dev_present(ap)) {
+ ata_port_probe(ap);
+ } else {
+ printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n",
+ ap->id, scr_read(ap, SCR_STATUS));
+ ata_port_disable(ap);
return;
}
+ ap->cbl = ATA_CBL_SATA;
tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr);
tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr);
@@ -636,37 +1272,118 @@
VPRINTK("EXIT\n");
}
-static void mv_port_init(struct ata_ioports *port, unsigned long base)
+/**
+ * mv_eng_timeout - Routine called by libata when SCSI times out I/O
+ * @ap: ATA channel to manipulate
+ *
+ * Intent is to clear all pending error conditions, reset the
+ * chip/bus, fail the command, and move on.
+ *
+ * LOCKING:
+ * This routine holds the host_set lock while failing the command.
+ */
+static void mv_eng_timeout(struct ata_port *ap)
{
- /* PIO related setup */
- port->data_addr = base + SHD_PIO_DATA_OFS;
- port->error_addr = port->feature_addr = base + SHD_FEA_ERR_OFS;
- port->nsect_addr = base + SHD_SECT_CNT_OFS;
- port->lbal_addr = base + SHD_LBA_L_OFS;
- port->lbam_addr = base + SHD_LBA_M_OFS;
- port->lbah_addr = base + SHD_LBA_H_OFS;
- port->device_addr = base + SHD_DEV_HD_OFS;
- port->status_addr = port->command_addr = base + SHD_CMD_STA_OFS;
- port->altstatus_addr = port->ctl_addr = base + SHD_CTL_AST_OFS;
- /* unused */
- port->cmd_addr = port->bmdma_addr = port->scr_addr = 0;
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
- /* unmask all EDMA error interrupts */
- writel(~0, (void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS);
+ printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id);
+ DPRINTK("All regs @ start of eng_timeout\n");
+ mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no,
+ to_pci_dev(ap->host_set->dev));
- VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
- readl((void __iomem *)base + EDMA_CFG_OFS),
- readl((void __iomem *)base + EDMA_ERR_IRQ_CAUSE_OFS),
- readl((void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS));
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n",
+ ap->host_set->mmio_base, ap, qc, qc->scsicmd,
+ &qc->scsicmd->cmnd);
+
+ mv_err_intr(ap);
+ mv_phy_reset(ap);
+
+ if (!qc) {
+ printk(KERN_ERR "ata%u: BUG: timeout without command\n",
+ ap->id);
+ } else {
+ /* hack alert! We cannot use the supplied completion
+ * function from inside the ->eh_strategy_handler() thread.
+ * libata is the only user of ->eh_strategy_handler() in
+ * any kernel, so the default scsi_done() assumes it is
+ * not being called from the SCSI EH.
+ */
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ qc->scsidone = scsi_finish_command;
+ ata_qc_complete(qc, ATA_ERR);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+ }
}
+/**
+ * mv_port_init - Perform some early initialization on a single port.
+ * @port: libata data structure storing shadow register addresses
+ * @port_mmio: base address of the port
+ *
+ * Initialize shadow register mmio addresses, clear outstanding
+ * interrupts on the port, and unmask interrupts for the future
+ * start of the port.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
+{
+ unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS;
+ unsigned serr_ofs;
+
+ /* PIO related setup
+ */
+ port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA);
+ port->error_addr =
+ port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR);
+ port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT);
+ port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL);
+ port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM);
+ port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH);
+ port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE);
+ port->status_addr =
+ port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS);
+ /* special case: control/altstatus doesn't have ATA_REG_ address */
+ port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS;
+
+ /* unused: */
+ port->cmd_addr = port->bmdma_addr = port->scr_addr = 0;
+
+ /* Clear any currently outstanding port interrupt conditions */
+ serr_ofs = mv_scr_offset(SCR_ERROR);
+ writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs);
+ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+ /* unmask all EDMA error interrupts */
+ writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
+
+ VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
+ readl(port_mmio + EDMA_CFG_OFS),
+ readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS),
+ readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
+}
+
+/**
+ * mv_host_init - Perform some early initialization of the host.
+ * @probe_ent: early data struct representing the host
+ *
+ * If possible, do an early global reset of the host. Then do
+ * our port init and clear/unmask all/relevant host interrupts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static int mv_host_init(struct ata_probe_ent *probe_ent)
{
int rc = 0, n_hc, port, hc;
void __iomem *mmio = probe_ent->mmio_base;
void __iomem *port_mmio;
- if (mv_master_reset(probe_ent->mmio_base)) {
+ if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) &&
+ mv_global_soft_reset(probe_ent->mmio_base)) {
rc = 1;
goto done;
}
@@ -676,17 +1393,27 @@
for (port = 0; port < probe_ent->n_ports; port++) {
port_mmio = mv_port_base(mmio, port);
- mv_port_init(&probe_ent->port[port], (unsigned long)port_mmio);
+ mv_port_init(&probe_ent->port[port], port_mmio);
}
for (hc = 0; hc < n_hc; hc++) {
- VPRINTK("HC%i: HC config=0x%08x HC IRQ cause=0x%08x\n", hc,
- readl(mv_hc_base(mmio, hc) + HC_CFG_OFS),
- readl(mv_hc_base(mmio, hc) + HC_IRQ_CAUSE_OFS));
+ void __iomem *hc_mmio = mv_hc_base(mmio, hc);
+
+ VPRINTK("HC%i: HC config=0x%08x HC IRQ cause "
+ "(before clear)=0x%08x\n", hc,
+ readl(hc_mmio + HC_CFG_OFS),
+ readl(hc_mmio + HC_IRQ_CAUSE_OFS));
+
+ /* Clear any currently outstanding hc interrupt conditions */
+ writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
}
- writel(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
- writel(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS);
+ /* Clear any currently outstanding host interrupt conditions */
+ writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
+
+ /* and unmask interrupt generation for host regs */
+ writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS);
+ writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
"PCI int cause/mask=0x%08x/0x%08x\n",
@@ -694,11 +1421,53 @@
readl(mmio + HC_MAIN_IRQ_MASK_OFS),
readl(mmio + PCI_IRQ_CAUSE_OFS),
readl(mmio + PCI_IRQ_MASK_OFS));
-
- done:
+done:
return rc;
}
+/**
+ * mv_print_info - Dump key info to kernel log for perusal.
+ * @probe_ent: early data struct representing the host
+ *
+ * FIXME: complete this.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_print_info(struct ata_probe_ent *probe_ent)
+{
+ struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+ struct mv_host_priv *hpriv = probe_ent->private_data;
+ u8 rev_id, scc;
+ const char *scc_s;
+
+ /* Use this to determine the HW stepping of the chip so we know
+ * what errata to workaround
+ */
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
+
+ pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
+ if (scc == 0)
+ scc_s = "SCSI";
+ else if (scc == 0x01)
+ scc_s = "RAID";
+ else
+ scc_s = "unknown";
+
+ printk(KERN_INFO DRV_NAME
+ "(%s) %u slots %u ports %s mode IRQ via %s\n",
+ pci_name(pdev), (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports,
+ scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
+}
+
+/**
+ * mv_init_one - handle a positive probe of a Marvell host
+ * @pdev: PCI device found
+ * @ent: PCI device ID entry for the matched host
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
@@ -706,16 +1475,12 @@
struct mv_host_priv *hpriv;
unsigned int board_idx = (unsigned int)ent->driver_data;
void __iomem *mmio_base;
- int pci_dev_busy = 0;
- int rc;
+ int pci_dev_busy = 0, rc;
if (!printed_version++) {
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ printk(KERN_INFO DRV_NAME " version " DRV_VERSION "\n");
}
- VPRINTK("ENTER for PCI Bus:Slot.Func=%u:%u.%u\n", pdev->bus->number,
- PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
-
rc = pci_enable_device(pdev);
if (rc) {
return rc;
@@ -727,8 +1492,6 @@
goto err_out;
}
- pci_intx(pdev, 1);
-
probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
if (probe_ent == NULL) {
rc = -ENOMEM;
@@ -739,8 +1502,7 @@
probe_ent->dev = pci_dev_to_dev(pdev);
INIT_LIST_HEAD(&probe_ent->node);
- mmio_base = ioremap_nocache(pci_resource_start(pdev, MV_PRIMARY_BAR),
- pci_resource_len(pdev, MV_PRIMARY_BAR));
+ mmio_base = pci_iomap(pdev, MV_PRIMARY_BAR, 0);
if (mmio_base == NULL) {
rc = -ENOMEM;
goto err_out_free_ent;
@@ -769,37 +1531,40 @@
if (rc) {
goto err_out_hpriv;
}
-/* mv_print_info(probe_ent); */
- {
- int b, w;
- u32 dw[4]; /* hold a line of 16b */
- VPRINTK("PCI config space:\n");
- for (b = 0; b < 0x40; ) {
- for (w = 0; w < 4; w++) {
- (void) pci_read_config_dword(pdev,b,&dw[w]);
- b += sizeof(*dw);
- }
- VPRINTK("%08x %08x %08x %08x\n",
- dw[0],dw[1],dw[2],dw[3]);
- }
+ /* Enable interrupts */
+ if (pci_enable_msi(pdev) == 0) {
+ hpriv->hp_flags |= MV_HP_FLAG_MSI;
+ } else {
+ pci_intx(pdev, 1);
}
- /* FIXME: check ata_device_add return value */
- ata_device_add(probe_ent);
- kfree(probe_ent);
+ mv_dump_pci_cfg(pdev, 0x68);
+ mv_print_info(probe_ent);
+ if (ata_device_add(probe_ent) == 0) {
+ rc = -ENODEV; /* No devices discovered */
+ goto err_out_dev_add;
+ }
+
+ kfree(probe_ent);
return 0;
- err_out_hpriv:
+err_out_dev_add:
+ if (MV_HP_FLAG_MSI & hpriv->hp_flags) {
+ pci_disable_msi(pdev);
+ } else {
+ pci_intx(pdev, 0);
+ }
+err_out_hpriv:
kfree(hpriv);
- err_out_iounmap:
- iounmap(mmio_base);
- err_out_free_ent:
+err_out_iounmap:
+ pci_iounmap(pdev, mmio_base);
+err_out_free_ent:
kfree(probe_ent);
- err_out_regions:
+err_out_regions:
pci_release_regions(pdev);
- err_out:
+err_out:
if (!pci_dev_busy) {
pci_disable_device(pdev);
}
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index cb832b0..1a56d6c 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -238,7 +238,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations nv_ops = {
+static const struct ata_port_operations nv_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -331,7 +331,7 @@
return 0xffffffffU;
if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
- return readl((void*)ap->ioaddr.scr_addr + (sc_reg * 4));
+ return readl((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4));
else
return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -345,7 +345,7 @@
return;
if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
- writel(val, (void*)ap->ioaddr.scr_addr + (sc_reg * 4));
+ writel(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4));
else
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -405,7 +405,7 @@
rc = -ENOMEM;
ppi = &nv_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+ probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
goto err_out_regions;
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 538ad72..eee93b0 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -87,8 +87,8 @@
static void pdc_pata_phy_reset(struct ata_port *ap);
static void pdc_sata_phy_reset(struct ata_port *ap);
static void pdc_qc_prep(struct ata_queued_cmd *qc);
-static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf);
-static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf);
+static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
+static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
static void pdc_irq_clear(struct ata_port *ap);
static int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
@@ -113,7 +113,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations pdc_sata_ops = {
+static const struct ata_port_operations pdc_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
@@ -136,7 +136,7 @@
.host_stop = ata_pci_host_stop,
};
-static struct ata_port_operations pdc_pata_ops = {
+static const struct ata_port_operations pdc_pata_ops = {
.port_disable = ata_port_disable,
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
@@ -324,7 +324,7 @@
{
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
- return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+ return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -333,7 +333,7 @@
{
if (sc_reg > SCR_CONTROL)
return;
- writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+ writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void pdc_qc_prep(struct ata_queued_cmd *qc)
@@ -438,11 +438,11 @@
break;
default:
- ap->stats.idle_irq++;
- break;
+ ap->stats.idle_irq++;
+ break;
}
- return handled;
+ return handled;
}
static void pdc_irq_clear(struct ata_port *ap)
@@ -523,8 +523,8 @@
pp->pkt[2] = seq;
wmb(); /* flush PRD, pkt writes */
- writel(pp->pkt_dma, (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
- readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
+ writel(pp->pkt_dma, (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
+ readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
}
static int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
@@ -546,7 +546,7 @@
return ata_qc_issue_prot(qc);
}
-static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON (tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
@@ -554,7 +554,7 @@
}
-static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON (tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index ffcdeb6..250dafa 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -51,8 +51,6 @@
QS_PRD_BYTES = QS_MAX_PRD * 16,
QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES,
- QS_DMA_BOUNDARY = ~0UL,
-
/* global register offsets */
QS_HCF_CNFG3 = 0x0003, /* host configuration offset */
QS_HID_HPHY = 0x0004, /* host physical interface info */
@@ -101,6 +99,10 @@
board_2068_idx = 0, /* QStor 4-port SATA/RAID */
};
+enum {
+ QS_DMA_BOUNDARY = ~0UL
+};
+
typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t;
struct qs_port_priv {
@@ -145,7 +147,7 @@
.bios_param = ata_std_bios_param,
};
-static struct ata_port_operations qs_ata_ops = {
+static const struct ata_port_operations qs_ata_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index ba98a17..3a05617 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -150,7 +150,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations sil_ops = {
+static const struct ata_port_operations sil_ops = {
.port_disable = ata_port_disable,
.dev_config = sil_dev_config,
.tf_load = ata_tf_load,
@@ -289,7 +289,7 @@
static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
- void *mmio = (void *) sil_scr_addr(ap, sc_reg);
+ void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
if (mmio)
return readl(mmio);
return 0xffffffffU;
@@ -297,7 +297,7 @@
static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
{
- void *mmio = (void *) sil_scr_addr(ap, sc_reg);
+ void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg);
if (mmio)
writel(val, mmio);
}
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
new file mode 100644
index 0000000..32d730b
--- /dev/null
+++ b/drivers/scsi/sata_sil24.c
@@ -0,0 +1,875 @@
+/*
+ * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
+ *
+ * Copyright 2005 Tejun Heo
+ *
+ * Based on preview driver from Silicon Image.
+ *
+ * NOTE: No NCQ/ATAPI support yet. The preview driver didn't support
+ * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make
+ * those work. Enabling those shouldn't be difficult. Basic
+ * structure is all there (in libata-dev tree). If you have any
+ * information about this hardware, please contact me or linux-ide.
+ * Info is needed on...
+ *
+ * - How to issue tagged commands and turn on sactive on issue accordingly.
+ * - Where to put an ATAPI command and how to tell the device to send it.
+ * - How to enable/use 64bit.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <scsi/scsi_host.h>
+#include "scsi.h"
+#include <linux/libata.h>
+#include <asm/io.h>
+
+#define DRV_NAME "sata_sil24"
+#define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */
+
+/*
+ * Port request block (PRB) 32 bytes
+ */
+struct sil24_prb {
+ u16 ctrl;
+ u16 prot;
+ u32 rx_cnt;
+ u8 fis[6 * 4];
+};
+
+/*
+ * Scatter gather entry (SGE) 16 bytes
+ */
+struct sil24_sge {
+ u64 addr;
+ u32 cnt;
+ u32 flags;
+};
+
+/*
+ * Port multiplier
+ */
+struct sil24_port_multiplier {
+ u32 diag;
+ u32 sactive;
+};
+
+enum {
+ /*
+ * Global controller registers (128 bytes @ BAR0)
+ */
+ /* 32 bit regs */
+ HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */
+ HOST_CTRL = 0x40,
+ HOST_IRQ_STAT = 0x44,
+ HOST_PHY_CFG = 0x48,
+ HOST_BIST_CTRL = 0x50,
+ HOST_BIST_PTRN = 0x54,
+ HOST_BIST_STAT = 0x58,
+ HOST_MEM_BIST_STAT = 0x5c,
+ HOST_FLASH_CMD = 0x70,
+ /* 8 bit regs */
+ HOST_FLASH_DATA = 0x74,
+ HOST_TRANSITION_DETECT = 0x75,
+ HOST_GPIO_CTRL = 0x76,
+ HOST_I2C_ADDR = 0x78, /* 32 bit */
+ HOST_I2C_DATA = 0x7c,
+ HOST_I2C_XFER_CNT = 0x7e,
+ HOST_I2C_CTRL = 0x7f,
+
+ /* HOST_SLOT_STAT bits */
+ HOST_SSTAT_ATTN = (1 << 31),
+
+ /*
+ * Port registers
+ * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
+ */
+ PORT_REGS_SIZE = 0x2000,
+ PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */
+
+ PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */
+ /* 32 bit regs */
+ PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */
+ PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */
+ PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */
+ PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */
+ PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */
+ PORT_ACTIVATE_UPPER_ADDR= 0x101c,
+ PORT_EXEC_FIFO = 0x1020, /* command execution fifo */
+ PORT_CMD_ERR = 0x1024, /* command error number */
+ PORT_FIS_CFG = 0x1028,
+ PORT_FIFO_THRES = 0x102c,
+ /* 16 bit regs */
+ PORT_DECODE_ERR_CNT = 0x1040,
+ PORT_DECODE_ERR_THRESH = 0x1042,
+ PORT_CRC_ERR_CNT = 0x1044,
+ PORT_CRC_ERR_THRESH = 0x1046,
+ PORT_HSHK_ERR_CNT = 0x1048,
+ PORT_HSHK_ERR_THRESH = 0x104a,
+ /* 32 bit regs */
+ PORT_PHY_CFG = 0x1050,
+ PORT_SLOT_STAT = 0x1800,
+ PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
+ PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
+ PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
+ PORT_SCONTROL = 0x1f00,
+ PORT_SSTATUS = 0x1f04,
+ PORT_SERROR = 0x1f08,
+ PORT_SACTIVE = 0x1f0c,
+
+ /* PORT_CTRL_STAT bits */
+ PORT_CS_PORT_RST = (1 << 0), /* port reset */
+ PORT_CS_DEV_RST = (1 << 1), /* device reset */
+ PORT_CS_INIT = (1 << 2), /* port initialize */
+ PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
+ PORT_CS_RESUME = (1 << 6), /* port resume */
+ PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
+ PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */
+ PORT_CS_RDY = (1 << 31), /* port ready to accept commands */
+
+ /* PORT_IRQ_STAT/ENABLE_SET/CLR */
+ /* bits[11:0] are masked */
+ PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */
+ PORT_IRQ_ERROR = (1 << 1), /* command execution error */
+ PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */
+ PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */
+ PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */
+ PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */
+ PORT_IRQ_UNK_FIS = (1 << 6), /* Unknown FIS received */
+ PORT_IRQ_SDB_FIS = (1 << 11), /* SDB FIS received */
+
+ /* bits[27:16] are unmasked (raw) */
+ PORT_IRQ_RAW_SHIFT = 16,
+ PORT_IRQ_MASKED_MASK = 0x7ff,
+ PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT),
+
+ /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
+ PORT_IRQ_STEER_SHIFT = 30,
+ PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT),
+
+ /* PORT_CMD_ERR constants */
+ PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */
+ PORT_CERR_SDB = 2, /* Error bit in SDB FIS */
+ PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */
+ PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */
+ PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */
+ PORT_CERR_DIRECTION = 6, /* Data direction mismatch */
+ PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */
+ PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */
+ PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */
+ PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */
+ PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */
+ PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */
+ PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
+ PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
+ PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */
+ PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */
+ PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
+ PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */
+ PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */
+ PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */
+ PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */
+ PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */
+
+ /*
+ * Other constants
+ */
+ SGE_TRM = (1 << 31), /* Last SGE in chain */
+ PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */
+
+ /* board id */
+ BID_SIL3124 = 0,
+ BID_SIL3132 = 1,
+ BID_SIL3131 = 2,
+
+ IRQ_STAT_4PORTS = 0xf,
+};
+
+struct sil24_cmd_block {
+ struct sil24_prb prb;
+ struct sil24_sge sge[LIBATA_MAX_PRD];
+};
+
+/*
+ * ap->private_data
+ *
+ * The preview driver always returned 0 for status. We emulate it
+ * here from the previous interrupt.
+ */
+struct sil24_port_priv {
+ struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */
+ dma_addr_t cmd_block_dma; /* DMA base addr for them */
+ struct ata_taskfile tf; /* Cached taskfile registers */
+};
+
+/* ap->host_set->private_data */
+struct sil24_host_priv {
+ void *host_base; /* global controller control (128 bytes @BAR0) */
+ void *port_base; /* port registers (4 * 8192 bytes @BAR2) */
+};
+
+static u8 sil24_check_status(struct ata_port *ap);
+static u8 sil24_check_err(struct ata_port *ap);
+static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
+static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
+static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
+static void sil24_phy_reset(struct ata_port *ap);
+static void sil24_qc_prep(struct ata_queued_cmd *qc);
+static int sil24_qc_issue(struct ata_queued_cmd *qc);
+static void sil24_irq_clear(struct ata_port *ap);
+static void sil24_eng_timeout(struct ata_port *ap);
+static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static int sil24_port_start(struct ata_port *ap);
+static void sil24_port_stop(struct ata_port *ap);
+static void sil24_host_stop(struct ata_host_set *host_set);
+static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+
+static struct pci_device_id sil24_pci_tbl[] = {
+ { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
+ { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 },
+ { 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 },
+ { 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 },
+ { } /* terminate list */
+};
+
+static struct pci_driver sil24_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = sil24_pci_tbl,
+ .probe = sil24_init_one,
+ .remove = ata_pci_remove_one, /* safe? */
+};
+
+static Scsi_Host_Template sil24_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .eh_strategy_handler = ata_scsi_error,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+ .ordered_flush = 1, /* NCQ not supported yet */
+};
+
+static const struct ata_port_operations sil24_ops = {
+ .port_disable = ata_port_disable,
+
+ .check_status = sil24_check_status,
+ .check_altstatus = sil24_check_status,
+ .check_err = sil24_check_err,
+ .dev_select = ata_noop_dev_select,
+
+ .tf_read = sil24_tf_read,
+
+ .phy_reset = sil24_phy_reset,
+
+ .qc_prep = sil24_qc_prep,
+ .qc_issue = sil24_qc_issue,
+
+ .eng_timeout = sil24_eng_timeout,
+
+ .irq_handler = sil24_interrupt,
+ .irq_clear = sil24_irq_clear,
+
+ .scr_read = sil24_scr_read,
+ .scr_write = sil24_scr_write,
+
+ .port_start = sil24_port_start,
+ .port_stop = sil24_port_stop,
+ .host_stop = sil24_host_stop,
+};
+
+/*
+ * Use bits 30-31 of host_flags to encode available port numbers.
+ * Current maxium is 4.
+ */
+#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30)
+#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1)
+
+static struct ata_port_info sil24_port_info[] = {
+ /* sil_3124 */
+ {
+ .sht = &sil24_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+ ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil24_ops,
+ },
+ /* sil_3132 */
+ {
+ .sht = &sil24_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+ ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil24_ops,
+ },
+ /* sil_3131/sil_3531 */
+ {
+ .sht = &sil24_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+ ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil24_ops,
+ },
+};
+
+static inline void sil24_update_tf(struct ata_port *ap)
+{
+ struct sil24_port_priv *pp = ap->private_data;
+ void *port = (void *)ap->ioaddr.cmd_addr;
+ struct sil24_prb *prb = port;
+
+ ata_tf_from_fis(prb->fis, &pp->tf);
+}
+
+static u8 sil24_check_status(struct ata_port *ap)
+{
+ struct sil24_port_priv *pp = ap->private_data;
+ return pp->tf.command;
+}
+
+static u8 sil24_check_err(struct ata_port *ap)
+{
+ struct sil24_port_priv *pp = ap->private_data;
+ return pp->tf.feature;
+}
+
+static int sil24_scr_map[] = {
+ [SCR_CONTROL] = 0,
+ [SCR_STATUS] = 1,
+ [SCR_ERROR] = 2,
+ [SCR_ACTIVE] = 3,
+};
+
+static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg)
+{
+ void *scr_addr = (void *)ap->ioaddr.scr_addr;
+ if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
+ void *addr;
+ addr = scr_addr + sil24_scr_map[sc_reg] * 4;
+ return readl(scr_addr + sil24_scr_map[sc_reg] * 4);
+ }
+ return 0xffffffffU;
+}
+
+static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
+{
+ void *scr_addr = (void *)ap->ioaddr.scr_addr;
+ if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
+ void *addr;
+ addr = scr_addr + sil24_scr_map[sc_reg] * 4;
+ writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
+ }
+}
+
+static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct sil24_port_priv *pp = ap->private_data;
+ *tf = pp->tf;
+}
+
+static void sil24_phy_reset(struct ata_port *ap)
+{
+ __sata_phy_reset(ap);
+ /*
+ * No ATAPI yet. Just unconditionally indicate ATA device.
+ * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA
+ * and libata core will ignore the device.
+ */
+ if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
+ ap->device[0].class = ATA_DEV_ATA;
+}
+
+static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
+ struct sil24_cmd_block *cb)
+{
+ struct scatterlist *sg = qc->sg;
+ struct sil24_sge *sge = cb->sge;
+ unsigned i;
+
+ for (i = 0; i < qc->n_elem; i++, sg++, sge++) {
+ sge->addr = cpu_to_le64(sg_dma_address(sg));
+ sge->cnt = cpu_to_le32(sg_dma_len(sg));
+ sge->flags = 0;
+ sge->flags = i < qc->n_elem - 1 ? 0 : cpu_to_le32(SGE_TRM);
+ }
+}
+
+static void sil24_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct sil24_port_priv *pp = ap->private_data;
+ struct sil24_cmd_block *cb = pp->cmd_block + qc->tag;
+ struct sil24_prb *prb = &cb->prb;
+
+ switch (qc->tf.protocol) {
+ case ATA_PROT_PIO:
+ case ATA_PROT_DMA:
+ case ATA_PROT_NODATA:
+ break;
+ default:
+ /* ATAPI isn't supported yet */
+ BUG();
+ }
+
+ ata_tf_to_fis(&qc->tf, prb->fis, 0);
+
+ if (qc->flags & ATA_QCFLAG_DMAMAP)
+ sil24_fill_sg(qc, cb);
+}
+
+static int sil24_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void *port = (void *)ap->ioaddr.cmd_addr;
+ struct sil24_port_priv *pp = ap->private_data;
+ dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block);
+
+ writel((u32)paddr, port + PORT_CMD_ACTIVATE);
+ return 0;
+}
+
+static void sil24_irq_clear(struct ata_port *ap)
+{
+ /* unused */
+}
+
+static int __sil24_reset_controller(void *port)
+{
+ int cnt;
+ u32 tmp;
+
+ /* Reset controller state. Is this correct? */
+ writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
+ readl(port + PORT_CTRL_STAT); /* sync */
+
+ /* Max ~100ms */
+ for (cnt = 0; cnt < 1000; cnt++) {
+ udelay(100);
+ tmp = readl(port + PORT_CTRL_STAT);
+ if (!(tmp & PORT_CS_DEV_RST))
+ break;
+ }
+
+ if (tmp & PORT_CS_DEV_RST)
+ return -1;
+ return 0;
+}
+
+static void sil24_reset_controller(struct ata_port *ap)
+{
+ printk(KERN_NOTICE DRV_NAME
+ " ata%u: resetting controller...\n", ap->id);
+ if (__sil24_reset_controller((void *)ap->ioaddr.cmd_addr))
+ printk(KERN_ERR DRV_NAME
+ " ata%u: failed to reset controller\n", ap->id);
+}
+
+static void sil24_eng_timeout(struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc;
+
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (!qc) {
+ printk(KERN_ERR "ata%u: BUG: tiemout without command\n",
+ ap->id);
+ return;
+ }
+
+ /*
+ * hack alert! We cannot use the supplied completion
+ * function from inside the ->eh_strategy_handler() thread.
+ * libata is the only user of ->eh_strategy_handler() in
+ * any kernel, so the default scsi_done() assumes it is
+ * not being called from the SCSI EH.
+ */
+ printk(KERN_ERR "ata%u: command timeout\n", ap->id);
+ qc->scsidone = scsi_finish_command;
+ ata_qc_complete(qc, ATA_ERR);
+
+ sil24_reset_controller(ap);
+}
+
+static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
+{
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+ struct sil24_port_priv *pp = ap->private_data;
+ void *port = (void *)ap->ioaddr.cmd_addr;
+ u32 irq_stat, cmd_err, sstatus, serror;
+
+ irq_stat = readl(port + PORT_IRQ_STAT);
+ writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */
+
+ if (!(irq_stat & PORT_IRQ_ERROR)) {
+ /* ignore non-completion, non-error irqs for now */
+ printk(KERN_WARNING DRV_NAME
+ "ata%u: non-error exception irq (irq_stat %x)\n",
+ ap->id, irq_stat);
+ return;
+ }
+
+ cmd_err = readl(port + PORT_CMD_ERR);
+ sstatus = readl(port + PORT_SSTATUS);
+ serror = readl(port + PORT_SERROR);
+ if (serror)
+ writel(serror, port + PORT_SERROR);
+
+ printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
+ " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
+ ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
+
+ if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) {
+ /*
+ * Device is reporting error, tf registers are valid.
+ */
+ sil24_update_tf(ap);
+ } else {
+ /*
+ * Other errors. libata currently doesn't have any
+ * mechanism to report these errors. Just turn on
+ * ATA_ERR.
+ */
+ pp->tf.command = ATA_ERR;
+ }
+
+ if (qc)
+ ata_qc_complete(qc, pp->tf.command);
+
+ sil24_reset_controller(ap);
+}
+
+static inline void sil24_host_intr(struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+ void *port = (void *)ap->ioaddr.cmd_addr;
+ u32 slot_stat;
+
+ slot_stat = readl(port + PORT_SLOT_STAT);
+ if (!(slot_stat & HOST_SSTAT_ATTN)) {
+ struct sil24_port_priv *pp = ap->private_data;
+ /*
+ * !HOST_SSAT_ATTN guarantees successful completion,
+ * so reading back tf registers is unnecessary for
+ * most commands. TODO: read tf registers for
+ * commands which require these values on successful
+ * completion (EXECUTE DEVICE DIAGNOSTIC, CHECK POWER,
+ * DEVICE RESET and READ PORT MULTIPLIER (any more?).
+ */
+ sil24_update_tf(ap);
+
+ if (qc)
+ ata_qc_complete(qc, pp->tf.command);
+ } else
+ sil24_error_intr(ap, slot_stat);
+}
+
+static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ata_host_set *host_set = dev_instance;
+ struct sil24_host_priv *hpriv = host_set->private_data;
+ unsigned handled = 0;
+ u32 status;
+ int i;
+
+ status = readl(hpriv->host_base + HOST_IRQ_STAT);
+
+ if (status == 0xffffffff) {
+ printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, "
+ "PCI fault or device removal?\n");
+ goto out;
+ }
+
+ if (!(status & IRQ_STAT_4PORTS))
+ goto out;
+
+ spin_lock(&host_set->lock);
+
+ for (i = 0; i < host_set->n_ports; i++)
+ if (status & (1 << i)) {
+ struct ata_port *ap = host_set->ports[i];
+ if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) {
+ sil24_host_intr(host_set->ports[i]);
+ handled++;
+ } else
+ printk(KERN_ERR DRV_NAME
+ ": interrupt from disabled port %d\n", i);
+ }
+
+ spin_unlock(&host_set->lock);
+ out:
+ return IRQ_RETVAL(handled);
+}
+
+static int sil24_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct sil24_port_priv *pp;
+ struct sil24_cmd_block *cb;
+ size_t cb_size = sizeof(*cb);
+ dma_addr_t cb_dma;
+
+ pp = kmalloc(sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ return -ENOMEM;
+ memset(pp, 0, sizeof(*pp));
+
+ pp->tf.command = ATA_DRDY;
+
+ cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
+ if (!cb) {
+ kfree(pp);
+ return -ENOMEM;
+ }
+ memset(cb, 0, cb_size);
+
+ pp->cmd_block = cb;
+ pp->cmd_block_dma = cb_dma;
+
+ ap->private_data = pp;
+
+ return 0;
+}
+
+static void sil24_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct sil24_port_priv *pp = ap->private_data;
+ size_t cb_size = sizeof(*pp->cmd_block);
+
+ dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma);
+ kfree(pp);
+}
+
+static void sil24_host_stop(struct ata_host_set *host_set)
+{
+ struct sil24_host_priv *hpriv = host_set->private_data;
+
+ iounmap(hpriv->host_base);
+ iounmap(hpriv->port_base);
+ kfree(hpriv);
+}
+
+static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version = 0;
+ unsigned int board_id = (unsigned int)ent->driver_data;
+ struct ata_port_info *pinfo = &sil24_port_info[board_id];
+ struct ata_probe_ent *probe_ent = NULL;
+ struct sil24_host_priv *hpriv = NULL;
+ void *host_base = NULL, *port_base = NULL;
+ int i, rc;
+
+ if (!printed_version++)
+ printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto out_disable;
+
+ rc = -ENOMEM;
+ /* ioremap mmio registers */
+ host_base = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (!host_base)
+ goto out_free;
+ port_base = ioremap(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2));
+ if (!port_base)
+ goto out_free;
+
+ /* allocate & init probe_ent and hpriv */
+ probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ if (!probe_ent)
+ goto out_free;
+
+ hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv)
+ goto out_free;
+
+ memset(probe_ent, 0, sizeof(*probe_ent));
+ probe_ent->dev = pci_dev_to_dev(pdev);
+ INIT_LIST_HEAD(&probe_ent->node);
+
+ probe_ent->sht = pinfo->sht;
+ probe_ent->host_flags = pinfo->host_flags;
+ probe_ent->pio_mask = pinfo->pio_mask;
+ probe_ent->udma_mask = pinfo->udma_mask;
+ probe_ent->port_ops = pinfo->port_ops;
+ probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags);
+
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->mmio_base = port_base;
+ probe_ent->private_data = hpriv;
+
+ memset(hpriv, 0, sizeof(*hpriv));
+ hpriv->host_base = host_base;
+ hpriv->port_base = port_base;
+
+ /*
+ * Configure the device
+ */
+ /*
+ * FIXME: This device is certainly 64-bit capable. We just
+ * don't know how to use it. After fixing 32bit activation in
+ * this function, enable 64bit masks here.
+ */
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
+ pci_name(pdev));
+ goto out_free;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc) {
+ printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
+ pci_name(pdev));
+ goto out_free;
+ }
+
+ /* GPIO off */
+ writel(0, host_base + HOST_FLASH_CMD);
+
+ /* Mask interrupts during initialization */
+ writel(0, host_base + HOST_CTRL);
+
+ for (i = 0; i < probe_ent->n_ports; i++) {
+ void *port = port_base + i * PORT_REGS_SIZE;
+ unsigned long portu = (unsigned long)port;
+ u32 tmp;
+ int cnt;
+
+ probe_ent->port[i].cmd_addr = portu + PORT_PRB;
+ probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
+
+ ata_std_ports(&probe_ent->port[i]);
+
+ /* Initial PHY setting */
+ writel(0x20c, port + PORT_PHY_CFG);
+
+ /* Clear port RST */
+ tmp = readl(port + PORT_CTRL_STAT);
+ if (tmp & PORT_CS_PORT_RST) {
+ writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
+ readl(port + PORT_CTRL_STAT); /* sync */
+ for (cnt = 0; cnt < 10; cnt++) {
+ msleep(10);
+ tmp = readl(port + PORT_CTRL_STAT);
+ if (!(tmp & PORT_CS_PORT_RST))
+ break;
+ }
+ if (tmp & PORT_CS_PORT_RST)
+ printk(KERN_ERR DRV_NAME
+ "(%s): failed to clear port RST\n",
+ pci_name(pdev));
+ }
+
+ /* Zero error counters. */
+ writel(0x8000, port + PORT_DECODE_ERR_THRESH);
+ writel(0x8000, port + PORT_CRC_ERR_THRESH);
+ writel(0x8000, port + PORT_HSHK_ERR_THRESH);
+ writel(0x0000, port + PORT_DECODE_ERR_CNT);
+ writel(0x0000, port + PORT_CRC_ERR_CNT);
+ writel(0x0000, port + PORT_HSHK_ERR_CNT);
+
+ /* FIXME: 32bit activation? */
+ writel(0, port + PORT_ACTIVATE_UPPER_ADDR);
+ writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT);
+
+ /* Configure interrupts */
+ writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
+ writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_SDB_FIS,
+ port + PORT_IRQ_ENABLE_SET);
+
+ /* Clear interrupts */
+ writel(0x0fff0fff, port + PORT_IRQ_STAT);
+ writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
+
+ /* Clear port multiplier enable and resume bits */
+ writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
+
+ /* Reset itself */
+ if (__sil24_reset_controller(port))
+ printk(KERN_ERR DRV_NAME
+ "(%s): failed to reset controller\n",
+ pci_name(pdev));
+ }
+
+ /* Turn on interrupts */
+ writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
+
+ pci_set_master(pdev);
+
+ /* FIXME: check ata_device_add return value */
+ ata_device_add(probe_ent);
+
+ kfree(probe_ent);
+ return 0;
+
+ out_free:
+ if (host_base)
+ iounmap(host_base);
+ if (port_base)
+ iounmap(port_base);
+ kfree(probe_ent);
+ kfree(hpriv);
+ pci_release_regions(pdev);
+ out_disable:
+ pci_disable_device(pdev);
+ return rc;
+}
+
+static int __init sil24_init(void)
+{
+ return pci_module_init(&sil24_pci_driver);
+}
+
+static void __exit sil24_exit(void)
+{
+ pci_unregister_driver(&sil24_pci_driver);
+}
+
+MODULE_AUTHOR("Tejun Heo");
+MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
+
+module_init(sil24_init);
+module_exit(sil24_exit);
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index b227e51..057f7b9 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -102,7 +102,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations sis_ops = {
+static const struct ata_port_operations sis_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -263,7 +263,7 @@
goto err_out_regions;
ppi = &sis_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+ probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent) {
rc = -ENOMEM;
goto err_out_regions;
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index d89d968..e0f9570 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -102,7 +102,7 @@
}
-static void k2_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -297,7 +297,7 @@
};
-static struct ata_port_operations k2_sata_ops = {
+static const struct ata_port_operations k2_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = k2_sata_tf_load,
.tf_read = k2_sata_tf_read,
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index 540a851..af08f4f 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -137,7 +137,7 @@
};
struct pdc_host_priv {
- void *dimm_mmio;
+ void __iomem *dimm_mmio;
unsigned int doing_hdma;
unsigned int hdma_prod;
@@ -157,8 +157,8 @@
static int pdc_port_start(struct ata_port *ap);
static void pdc_port_stop(struct ata_port *ap);
static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
-static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf);
-static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf);
+static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
+static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
static void pdc20621_host_stop(struct ata_host_set *host_set);
static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe);
static int pdc20621_detect_dimm(struct ata_probe_ent *pe);
@@ -196,7 +196,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations pdc_20621_ops = {
+static const struct ata_port_operations pdc_20621_ops = {
.port_disable = ata_port_disable,
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
@@ -247,7 +247,7 @@
{
struct pci_dev *pdev = to_pci_dev(host_set->dev);
struct pdc_host_priv *hpriv = host_set->private_data;
- void *dimm_mmio = hpriv->dimm_mmio;
+ void __iomem *dimm_mmio = hpriv->dimm_mmio;
pci_iounmap(pdev, dimm_mmio);
kfree(hpriv);
@@ -669,8 +669,8 @@
readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */
writel(port_ofs + PDC_DIMM_ATA_PKT,
- (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
- readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
+ (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
+ readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
VPRINTK("submitted ofs 0x%x (%u), seq %u\n",
port_ofs + PDC_DIMM_ATA_PKT,
port_ofs + PDC_DIMM_ATA_PKT,
@@ -747,8 +747,8 @@
writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4));
readl(mmio + PDC_20621_SEQCTL + (seq * 4));
writel(port_ofs + PDC_DIMM_ATA_PKT,
- (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
- readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
+ (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
+ readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
}
/* step two - execute ATA command */
@@ -899,7 +899,7 @@
DPRINTK("EXIT\n");
}
-static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON (tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
@@ -907,7 +907,7 @@
}
-static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON (tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
@@ -1014,7 +1014,7 @@
idx++;
dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size :
(long) (window_size - offset);
- memcpy_toio((char *) (dimm_mmio + offset / 4), (char *) psource, dist);
+ memcpy_toio(dimm_mmio + offset / 4, psource, dist);
writel(0x01, mmio + PDC_GENERAL_CTLR);
readl(mmio + PDC_GENERAL_CTLR);
@@ -1023,8 +1023,7 @@
for (; (long) size >= (long) window_size ;) {
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
readl(mmio + PDC_DIMM_WINDOW_CTLR);
- memcpy_toio((char *) (dimm_mmio), (char *) psource,
- window_size / 4);
+ memcpy_toio(dimm_mmio, psource, window_size / 4);
writel(0x01, mmio + PDC_GENERAL_CTLR);
readl(mmio + PDC_GENERAL_CTLR);
psource += window_size;
@@ -1035,7 +1034,7 @@
if (size) {
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
readl(mmio + PDC_DIMM_WINDOW_CTLR);
- memcpy_toio((char *) (dimm_mmio), (char *) psource, size / 4);
+ memcpy_toio(dimm_mmio, psource, size / 4);
writel(0x01, mmio + PDC_GENERAL_CTLR);
readl(mmio + PDC_GENERAL_CTLR);
}
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index 4c9fb8b7..d68dc7d 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -90,7 +90,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations uli_ops = {
+static const struct ata_port_operations uli_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
@@ -202,7 +202,7 @@
goto err_out_regions;
ppi = &uli_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+ probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent) {
rc = -ENOMEM;
goto err_out_regions;
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 128b996..80e291a 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -109,7 +109,7 @@
.ordered_flush = 1,
};
-static struct ata_port_operations svia_sata_ops = {
+static const struct ata_port_operations svia_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
@@ -212,7 +212,7 @@
struct ata_probe_ent *probe_ent;
struct ata_port_info *ppi = &svia_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+ probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
return NULL;
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index cf94e01..5af05fd 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -86,7 +86,7 @@
{
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
- return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+ return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -95,16 +95,16 @@
{
if (sc_reg > SCR_CONTROL)
return;
- writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+ writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
{
- unsigned long mask_addr;
+ void __iomem *mask_addr;
u8 mask;
- mask_addr = (unsigned long) ap->host_set->mmio_base +
+ mask_addr = ap->host_set->mmio_base +
VSC_SATA_INT_MASK_OFFSET + ap->port_no;
mask = readb(mask_addr);
if (ctl & ATA_NIEN)
@@ -115,7 +115,7 @@
}
-static void vsc_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -231,7 +231,7 @@
};
-static struct ata_port_operations vsc_sata_ops = {
+static const struct ata_port_operations vsc_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = vsc_sata_tf_load,
.tf_read = vsc_sata_tf_read,
@@ -283,7 +283,7 @@
struct ata_probe_ent *probe_ent = NULL;
unsigned long base;
int pci_dev_busy = 0;
- void *mmio_base;
+ void __iomem *mmio_base;
int rc;
if (!printed_version++)
diff --git a/include/linux/ata.h b/include/linux/ata.h
index a5b74ef..d2873b7 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -42,13 +42,18 @@
ATA_SECT_SIZE = 512,
ATA_ID_WORDS = 256,
- ATA_ID_PROD_OFS = 27,
- ATA_ID_FW_REV_OFS = 23,
ATA_ID_SERNO_OFS = 10,
- ATA_ID_MAJOR_VER = 80,
- ATA_ID_PIO_MODES = 64,
+ ATA_ID_FW_REV_OFS = 23,
+ ATA_ID_PROD_OFS = 27,
+ ATA_ID_OLD_PIO_MODES = 51,
+ ATA_ID_FIELD_VALID = 53,
ATA_ID_MWDMA_MODES = 63,
+ ATA_ID_PIO_MODES = 64,
+ ATA_ID_EIDE_DMA_MIN = 65,
+ ATA_ID_EIDE_PIO = 67,
+ ATA_ID_EIDE_PIO_IORDY = 68,
ATA_ID_UDMA_MODES = 88,
+ ATA_ID_MAJOR_VER = 80,
ATA_ID_PIO4 = (1 << 1),
ATA_PCI_CTL_OFS = 2,
@@ -128,10 +133,15 @@
ATA_CMD_PIO_READ_EXT = 0x24,
ATA_CMD_PIO_WRITE = 0x30,
ATA_CMD_PIO_WRITE_EXT = 0x34,
+ ATA_CMD_READ_MULTI = 0xC4,
+ ATA_CMD_READ_MULTI_EXT = 0x29,
+ ATA_CMD_WRITE_MULTI = 0xC5,
+ ATA_CMD_WRITE_MULTI_EXT = 0x39,
ATA_CMD_SET_FEATURES = 0xEF,
ATA_CMD_PACKET = 0xA0,
ATA_CMD_VERIFY = 0x40,
ATA_CMD_VERIFY_EXT = 0x42,
+ ATA_CMD_INIT_DEV_PARAMS = 0x91,
/* SETFEATURES stuff */
SETFEATURES_XFER = 0x03,
@@ -146,14 +156,14 @@
XFER_MW_DMA_2 = 0x22,
XFER_MW_DMA_1 = 0x21,
XFER_MW_DMA_0 = 0x20,
+ XFER_SW_DMA_2 = 0x12,
+ XFER_SW_DMA_1 = 0x11,
+ XFER_SW_DMA_0 = 0x10,
XFER_PIO_4 = 0x0C,
XFER_PIO_3 = 0x0B,
XFER_PIO_2 = 0x0A,
XFER_PIO_1 = 0x09,
XFER_PIO_0 = 0x08,
- XFER_SW_DMA_2 = 0x12,
- XFER_SW_DMA_1 = 0x11,
- XFER_SW_DMA_0 = 0x10,
XFER_PIO_SLOW = 0x00,
/* ATAPI stuff */
@@ -181,6 +191,7 @@
ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */
ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */
ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */
+ ATA_TFLAG_LBA = (1 << 4), /* enable LBA */
};
enum ata_tf_protocols {
@@ -250,7 +261,19 @@
((u64) (id)[(n) + 1] << 16) | \
((u64) (id)[(n) + 0]) )
-static inline int atapi_cdb_len(u16 *dev_id)
+static inline int ata_id_current_chs_valid(const u16 *id)
+{
+ /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
+ has not been issued to the device then the values of
+ id[54] to id[56] are vendor specific. */
+ return (id[53] & 0x01) && /* Current translation valid */
+ id[54] && /* cylinders in current translation */
+ id[55] && /* heads in current translation */
+ id[55] <= 16 &&
+ id[56]; /* sectors in current translation */
+}
+
+static inline int atapi_cdb_len(const u16 *dev_id)
{
u16 tmp = dev_id[0] & 0x3;
switch (tmp) {
@@ -260,7 +283,7 @@
}
}
-static inline int is_atapi_taskfile(struct ata_taskfile *tf)
+static inline int is_atapi_taskfile(const struct ata_taskfile *tf)
{
return (tf->protocol == ATA_PROT_ATAPI) ||
(tf->protocol == ATA_PROT_ATAPI_NODATA) ||
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ceee1fc..00a8a57 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -91,12 +91,13 @@
ATA_SHT_EMULATED = 1,
ATA_SHT_CMD_PER_LUN = 1,
ATA_SHT_THIS_ID = -1,
- ATA_SHT_USE_CLUSTERING = 0,
+ ATA_SHT_USE_CLUSTERING = 1,
/* struct ata_device stuff */
ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */
ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */
ATA_DFLAG_LOCK_SECTORS = (1 << 2), /* don't adjust max_sectors */
+ ATA_DFLAG_LBA = (1 << 3), /* device supports LBA */
ATA_DEV_UNKNOWN = 0, /* unknown device */
ATA_DEV_ATA = 1, /* ATA device */
@@ -154,17 +155,21 @@
ATA_SHIFT_UDMA = 0,
ATA_SHIFT_MWDMA = 8,
ATA_SHIFT_PIO = 11,
+
+ /* Masks for port functions */
+ ATA_PORT_PRIMARY = (1 << 0),
+ ATA_PORT_SECONDARY = (1 << 1),
};
-enum pio_task_states {
- PIO_ST_UNKNOWN,
- PIO_ST_IDLE,
- PIO_ST_POLL,
- PIO_ST_TMOUT,
- PIO_ST,
- PIO_ST_LAST,
- PIO_ST_LAST_POLL,
- PIO_ST_ERR,
+enum hsm_task_states {
+ HSM_ST_UNKNOWN,
+ HSM_ST_IDLE,
+ HSM_ST_POLL,
+ HSM_ST_TMOUT,
+ HSM_ST,
+ HSM_ST_LAST,
+ HSM_ST_LAST_POLL,
+ HSM_ST_ERR,
};
/* forward declarations */
@@ -197,7 +202,7 @@
struct ata_probe_ent {
struct list_head node;
struct device *dev;
- struct ata_port_operations *port_ops;
+ const struct ata_port_operations *port_ops;
Scsi_Host_Template *sht;
struct ata_ioports port[ATA_MAX_PORTS];
unsigned int n_ports;
@@ -220,7 +225,7 @@
void __iomem *mmio_base;
unsigned int n_ports;
void *private_data;
- struct ata_port_operations *ops;
+ const struct ata_port_operations *ops;
struct ata_port * ports[0];
};
@@ -278,15 +283,18 @@
u8 xfer_mode;
unsigned int xfer_shift; /* ATA_SHIFT_xxx */
- /* cache info about current transfer mode */
- u8 xfer_protocol; /* taskfile xfer protocol */
- u8 read_cmd; /* opcode to use on read */
- u8 write_cmd; /* opcode to use on write */
+ unsigned int multi_count; /* sectors count for
+ READ/WRITE MULTIPLE */
+
+ /* for CHS addressing */
+ u16 cylinders; /* Number of cylinders */
+ u16 heads; /* Number of heads */
+ u16 sectors; /* Number of sectors per track */
};
struct ata_port {
struct Scsi_Host *host; /* our co-allocated scsi host */
- struct ata_port_operations *ops;
+ const struct ata_port_operations *ops;
unsigned long flags; /* ATA_FLAG_xxx */
unsigned int id; /* unique id req'd by scsi midlyr */
unsigned int port_no; /* unique port #; from zero */
@@ -319,7 +327,7 @@
struct work_struct packet_task;
struct work_struct pio_task;
- unsigned int pio_task_state;
+ unsigned int hsm_task_state;
unsigned long pio_task_timeout;
void *private_data;
@@ -333,10 +341,10 @@
void (*set_piomode) (struct ata_port *, struct ata_device *);
void (*set_dmamode) (struct ata_port *, struct ata_device *);
- void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+ void (*tf_load) (struct ata_port *ap, const struct ata_taskfile *tf);
void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
- void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+ void (*exec_command)(struct ata_port *ap, const struct ata_taskfile *tf);
u8 (*check_status)(struct ata_port *ap);
u8 (*check_altstatus)(struct ata_port *ap);
u8 (*check_err)(struct ata_port *ap);
@@ -377,9 +385,22 @@
unsigned long pio_mask;
unsigned long mwdma_mask;
unsigned long udma_mask;
- struct ata_port_operations *port_ops;
+ const struct ata_port_operations *port_ops;
};
+struct ata_timing {
+ unsigned short mode; /* ATA mode */
+ unsigned short setup; /* t1 */
+ unsigned short act8b; /* t2 for 8-bit I/O */
+ unsigned short rec8b; /* t2i for 8-bit I/O */
+ unsigned short cyc8b; /* t0 for 8-bit I/O */
+ unsigned short active; /* t2 or tD */
+ unsigned short recover; /* t2i or tK */
+ unsigned short cycle; /* t0 */
+ unsigned short udma; /* t2CYCTYP/2 */
+};
+
+#define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin)
extern void ata_port_probe(struct ata_port *);
extern void __sata_phy_reset(struct ata_port *ap);
@@ -392,7 +413,7 @@
unsigned int n_ports);
extern void ata_pci_remove_one (struct pci_dev *pdev);
#endif /* CONFIG_PCI */
-extern int ata_device_add(struct ata_probe_ent *ent);
+extern int ata_device_add(const struct ata_probe_ent *ent);
extern void ata_host_set_remove(struct ata_host_set *host_set);
extern int ata_scsi_detect(Scsi_Host_Template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
@@ -400,19 +421,21 @@
extern int ata_scsi_error(struct Scsi_Host *host);
extern int ata_scsi_release(struct Scsi_Host *host);
extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
+extern int ata_ratelimit(void);
+
/*
* Default driver ops implementations
*/
-extern void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf);
+extern void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
-extern void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp);
-extern void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf);
+extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp);
+extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
extern void ata_noop_dev_select (struct ata_port *ap, unsigned int device);
extern void ata_std_dev_select (struct ata_port *ap, unsigned int device);
extern u8 ata_check_status(struct ata_port *ap);
extern u8 ata_altstatus(struct ata_port *ap);
extern u8 ata_chk_err(struct ata_port *ap);
-extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf);
+extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf);
extern int ata_port_start (struct ata_port *ap);
extern void ata_port_stop (struct ata_port *ap);
extern void ata_host_stop (struct ata_host_set *host_set);
@@ -423,8 +446,8 @@
unsigned int buflen);
extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem);
-extern unsigned int ata_dev_classify(struct ata_taskfile *tf);
-extern void ata_dev_id_string(u16 *id, unsigned char *s,
+extern unsigned int ata_dev_classify(const struct ata_taskfile *tf);
+extern void ata_dev_id_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
extern void ata_dev_config(struct ata_port *ap, unsigned int i);
extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
@@ -441,6 +464,32 @@
sector_t capacity, int geom[]);
extern int ata_scsi_slave_config(struct scsi_device *sdev);
+/*
+ * Timing helpers
+ */
+extern int ata_timing_compute(struct ata_device *, unsigned short,
+ struct ata_timing *, int, int);
+extern void ata_timing_merge(const struct ata_timing *,
+ const struct ata_timing *, struct ata_timing *,
+ unsigned int);
+
+enum {
+ ATA_TIMING_SETUP = (1 << 0),
+ ATA_TIMING_ACT8B = (1 << 1),
+ ATA_TIMING_REC8B = (1 << 2),
+ ATA_TIMING_CYC8B = (1 << 3),
+ ATA_TIMING_8BIT = ATA_TIMING_ACT8B | ATA_TIMING_REC8B |
+ ATA_TIMING_CYC8B,
+ ATA_TIMING_ACTIVE = (1 << 4),
+ ATA_TIMING_RECOVER = (1 << 5),
+ ATA_TIMING_CYCLE = (1 << 6),
+ ATA_TIMING_UDMA = (1 << 7),
+ ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
+ ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
+ ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
+ ATA_TIMING_CYCLE | ATA_TIMING_UDMA,
+};
+
#ifdef CONFIG_PCI
struct pci_bits {
@@ -452,8 +501,8 @@
extern void ata_pci_host_stop (struct ata_host_set *host_set);
extern struct ata_probe_ent *
-ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port);
-extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits);
+ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask);
+extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
#endif /* CONFIG_PCI */
@@ -463,7 +512,7 @@
return (tag < ATA_MAX_QUEUE) ? 1 : 0;
}
-static inline unsigned int ata_dev_present(struct ata_device *dev)
+static inline unsigned int ata_dev_present(const struct ata_device *dev)
{
return ((dev->class == ATA_DEV_ATA) ||
(dev->class == ATA_DEV_ATAPI));
@@ -662,7 +711,7 @@
return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0;
}
-static inline int ata_try_flush_cache(struct ata_device *dev)
+static inline int ata_try_flush_cache(const struct ata_device *dev)
{
return ata_id_wcache_enabled(dev->id) ||
ata_id_has_flush(dev->id) ||