| /* |
| * linux/drivers/pcmcia/pxa2xx_trizeps4.c |
| * |
| * TRIZEPS PCMCIA specific routines. |
| * |
| * Author: Jürgen Schindele |
| * Created: 20 02, 2006 |
| * Copyright: Jürgen Schindele |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/gpio.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/irq.h> |
| |
| #include <mach/pxa2xx-regs.h> |
| #include <mach/trizeps4.h> |
| |
| #include "soc_common.h" |
| |
| extern void board_pcmcia_power(int power); |
| |
| static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt) |
| { |
| /* we dont have voltage/card/ready detection |
| * so we dont need interrupts for it |
| */ |
| switch (skt->nr) { |
| case 0: |
| skt->stat[SOC_STAT_CD].gpio = GPIO_PCD; |
| skt->stat[SOC_STAT_CD].name = "cs0_cd"; |
| skt->stat[SOC_STAT_RDY].gpio = GPIO_PRDY; |
| skt->stat[SOC_STAT_RDY].name = "cs0_rdy"; |
| break; |
| default: |
| break; |
| } |
| /* release the reset of this card */ |
| pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->socket.pci_irq); |
| |
| return 0; |
| } |
| |
| static unsigned long trizeps_pcmcia_status[2]; |
| |
| static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt, |
| struct pcmcia_state *state) |
| { |
| unsigned short status = 0, change; |
| status = CFSR_readw(); |
| change = (status ^ trizeps_pcmcia_status[skt->nr]) & |
| ConXS_CFSR_BVD_MASK; |
| if (change) { |
| trizeps_pcmcia_status[skt->nr] = status; |
| if (status & ConXS_CFSR_BVD1) { |
| /* enable_irq empty */ |
| } else { |
| /* disable_irq empty */ |
| } |
| } |
| |
| switch (skt->nr) { |
| case 0: |
| /* just fill in fix states */ |
| state->bvd1 = (status & ConXS_CFSR_BVD1) ? 1 : 0; |
| state->bvd2 = (status & ConXS_CFSR_BVD2) ? 1 : 0; |
| state->vs_3v = (status & ConXS_CFSR_VS1) ? 0 : 1; |
| state->vs_Xv = (status & ConXS_CFSR_VS2) ? 0 : 1; |
| break; |
| |
| #ifndef CONFIG_MACH_TRIZEPS_CONXS |
| /* on ConXS we only have one slot. Second is inactive */ |
| case 1: |
| state->detect = 0; |
| state->ready = 0; |
| state->bvd1 = 0; |
| state->bvd2 = 0; |
| state->vs_3v = 0; |
| state->vs_Xv = 0; |
| break; |
| |
| #endif |
| } |
| } |
| |
| static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, |
| const socket_state_t *state) |
| { |
| int ret = 0; |
| unsigned short power = 0; |
| |
| /* we do nothing here just check a bit */ |
| switch (state->Vcc) { |
| case 0: power &= 0xfc; break; |
| case 33: power |= ConXS_BCR_S0_VCC_3V3; break; |
| case 50: |
| pr_err("%s(): Vcc 5V not supported in socket\n", __func__); |
| break; |
| default: |
| pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc); |
| ret = -1; |
| } |
| |
| switch (state->Vpp) { |
| case 0: power &= 0xf3; break; |
| case 33: power |= ConXS_BCR_S0_VPP_3V3; break; |
| case 120: |
| pr_err("%s(): Vpp 12V not supported in socket\n", __func__); |
| break; |
| default: |
| if (state->Vpp != state->Vcc) { |
| pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp); |
| ret = -1; |
| } |
| } |
| |
| switch (skt->nr) { |
| case 0: /* we only have 3.3V */ |
| board_pcmcia_power(power); |
| break; |
| |
| #ifndef CONFIG_MACH_TRIZEPS_CONXS |
| /* on ConXS we only have one slot. Second is inactive */ |
| case 1: |
| #endif |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt) |
| { |
| /* default is on */ |
| board_pcmcia_power(0x9); |
| } |
| |
| static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) |
| { |
| board_pcmcia_power(0x0); |
| } |
| |
| static struct pcmcia_low_level trizeps_pcmcia_ops = { |
| .owner = THIS_MODULE, |
| .hw_init = trizeps_pcmcia_hw_init, |
| .socket_state = trizeps_pcmcia_socket_state, |
| .configure_socket = trizeps_pcmcia_configure_socket, |
| .socket_init = trizeps_pcmcia_socket_init, |
| .socket_suspend = trizeps_pcmcia_socket_suspend, |
| #ifdef CONFIG_MACH_TRIZEPS_CONXS |
| .nr = 1, |
| #else |
| .nr = 2, |
| #endif |
| .first = 0, |
| }; |
| |
| static struct platform_device *trizeps_pcmcia_device; |
| |
| static int __init trizeps_pcmcia_init(void) |
| { |
| int ret; |
| |
| if (!machine_is_trizeps4() && !machine_is_trizeps4wl()) |
| return -ENODEV; |
| |
| trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); |
| if (!trizeps_pcmcia_device) |
| return -ENOMEM; |
| |
| ret = platform_device_add_data(trizeps_pcmcia_device, |
| &trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops)); |
| |
| if (ret == 0) |
| ret = platform_device_add(trizeps_pcmcia_device); |
| |
| if (ret) |
| platform_device_put(trizeps_pcmcia_device); |
| |
| return ret; |
| } |
| |
| static void __exit trizeps_pcmcia_exit(void) |
| { |
| platform_device_unregister(trizeps_pcmcia_device); |
| } |
| |
| fs_initcall(trizeps_pcmcia_init); |
| module_exit(trizeps_pcmcia_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Juergen Schindele"); |
| MODULE_ALIAS("platform:pxa2xx-pcmcia"); |