arch/m68k/Kconfig - kernel/msm-4.9 - Gitiles

 #
 # For a description of the syntax of this configuration file,
 # see Documentation/kbuild/kconfig-language.txt.
 #
 config M68K
 	bool
 	default y

 config MMU
 	bool
 	default y

 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y

 config RWSEM_XCHGADD_ALGORITHM
 	bool

 config ARCH_HAS_ILOG2_U32
 	bool
 	default n

 config ARCH_HAS_ILOG2_U64
 	bool
 	default n

 config GENERIC_HWEIGHT
 	bool
 	default y

 config GENERIC_CALIBRATE_DELAY
 	bool
 	default y

 config TIME_LOW_RES
 	bool
 	default y

 config ARCH_MAY_HAVE_PC_FDC
 	bool
 	depends on Q40 || (BROKEN && SUN3X)
 	default y

 config NO_IOPORT
 	def_bool y

 mainmenu "Linux/68k Kernel Configuration"

 source "init/Kconfig"

 menu "Platform dependent setup"

 config EISA
 	bool
 	---help---
 	  The Extended Industry Standard Architecture (EISA) bus was
 	  developed as an open alternative to the IBM MicroChannel bus.

 	  The EISA bus provided some of the features of the IBM MicroChannel
 	  bus while maintaining backward compatibility with cards made for
 	  the older ISA bus.  The EISA bus saw limited use between 1988 and
 	  1995 when it was made obsolete by the PCI bus.

 	  Say Y here if you are building a kernel for an EISA-based machine.

 	  Otherwise, say N.

 config MCA
 	bool
 	help
 	  MicroChannel Architecture is found in some IBM PS/2 machines and
 	  laptops.  It is a bus system similar to PCI or ISA. See
 	  <file:Documentation/mca.txt> (and especially the web page given
 	  there) before attempting to build an MCA bus kernel.

 config PCMCIA
 	tristate
 	---help---
 	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
 	  computer.  These are credit-card size devices such as network cards,
 	  modems or hard drives often used with laptops computers.  There are
 	  actually two varieties of these cards: the older 16 bit PCMCIA cards
 	  and the newer 32 bit CardBus cards.  If you want to use CardBus
 	  cards, you need to say Y here and also to "CardBus support" below.

 	  To use your PC-cards, you will need supporting software from David
 	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
 	  for location).  Please also read the PCMCIA-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.

 	  To compile this driver as modules, choose M here: the
 	  modules will be called pcmcia_core and ds.

 config SUN3
 	bool "Sun3 support"
 	select M68020
 	select MMU_SUN3 if MMU
 	help
 	  This option enables support for the Sun 3 series of workstations
 	  (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
 	  that all other hardware types must be disabled, as Sun 3 kernels
 	  are incompatible with all other m68k targets (including Sun 3x!).

 	  If you don't want to compile a kernel exclusively for a Sun 3, say N.

 config AMIGA
 	bool "Amiga support"
 	depends on !MMU_SUN3
 	help
 	  This option enables support for the Amiga series of computers. If
 	  you plan to use this kernel on an Amiga, say Y here and browse the
 	  material available in <file:Documentation/m68k>; otherwise say N.

 config ATARI
 	bool "Atari support"
 	depends on !MMU_SUN3
 	help
 	  This option enables support for the 68000-based Atari series of
 	  computers (including the TT, Falcon and Medusa). If you plan to use
 	  this kernel on an Atari, say Y here and browse the material
 	  available in <file:Documentation/m68k>; otherwise say N.

 config HADES
 	bool "Hades support"
 	depends on ATARI && BROKEN
 	help
 	  This option enables support for the Hades Atari clone. If you plan
 	  to use this kernel on a Hades, say Y here; otherwise say N.

 config PCI
 	bool
 	depends on HADES
 	default y
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
 	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
 	  VESA. If you have PCI, say Y, otherwise N.

 	  The PCI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>, contains valuable
 	  information about which PCI hardware does work under Linux and which
 	  doesn't.

 config MAC
 	bool "Macintosh support"
 	depends on !MMU_SUN3
 	help
 	  This option enables support for the Apple Macintosh series of
 	  computers (yes, there is experimental support now, at least for part
 	  of the series).

 	  Say N unless you're willing to code the remaining necessary support.
 	  ;)

 config NUBUS
 	bool
 	depends on MAC
 	default y

 config M68K_L2_CACHE
 	bool
 	depends on MAC
 	default y

 config APOLLO
 	bool "Apollo support"
 	depends on !MMU_SUN3
 	help
 	  Say Y here if you want to run Linux on an MC680x0-based Apollo
 	  Domain workstation such as the DN3500.

 config VME
 	bool "VME (Motorola and BVM) support"
 	depends on !MMU_SUN3
 	help
 	  Say Y here if you want to build a kernel for a 680x0 based VME
 	  board.  Boards currently supported include Motorola boards MVME147,
 	  MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
 	  BVME6000 boards from BVM Ltd are also supported.

 config MVME147
 	bool "MVME147 support"
 	depends on VME
 	help
 	  Say Y to include support for early Motorola VME boards.  This will
 	  build a kernel which can run on MVME147 single-board computers.  If
 	  you select this option you will have to select the appropriate
 	  drivers for SCSI, Ethernet and serial ports later on.

 config MVME16x
 	bool "MVME162, 166 and 167 support"
 	depends on VME
 	help
 	  Say Y to include support for Motorola VME boards.  This will build a
 	  kernel which can run on MVME162, MVME166, MVME167, MVME172, and
 	  MVME177 boards.  If you select this option you will have to select
 	  the appropriate drivers for SCSI, Ethernet and serial ports later
 	  on.

 config BVME6000
 	bool "BVME4000 and BVME6000 support"
 	depends on VME
 	help
 	  Say Y to include support for VME boards from BVM Ltd.  This will
 	  build a kernel which can run on BVME4000 and BVME6000 boards.  If
 	  you select this option you will have to select the appropriate
 	  drivers for SCSI, Ethernet and serial ports later on.

 config HP300
 	bool "HP9000/300 and HP9000/400 support"
 	depends on !MMU_SUN3
 	help
 	  This option enables support for the HP9000/300 and HP9000/400 series
 	  of workstations. Support for these machines is still somewhat
 	  experimental. If you plan to try to use the kernel on such a machine
 	  say Y here.
 	  Everybody else says N.

 config DIO
 	bool "DIO bus support"
 	depends on HP300
 	default y
 	help
 	  Say Y here to enable support for the "DIO" expansion bus used in
 	  HP300 machines. If you are using such a system you almost certainly
 	  want this.

 config SUN3X
 	bool "Sun3x support"
 	depends on !MMU_SUN3
 	select M68030
 	help
 	  This option enables support for the Sun 3x series of workstations.
 	  Be warned that this support is very experimental.
 	  Note that Sun 3x kernels are not compatible with Sun 3 hardware.
 	  General Linux information on the Sun 3x series (now discontinued)
 	  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.

 	  If you don't want to compile a kernel for a Sun 3x, say N.

 config Q40
 	bool "Q40/Q60 support"
 	depends on !MMU_SUN3
 	help
 	  The Q40 is a Motorola 68040-based successor to the Sinclair QL
 	  manufactured in Germany.  There is an official Q40 home page at
 	  <http://www.q40.de/>.  This option enables support for the Q40 and
 	  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
 	  emulation.

 comment "Processor type"

 config M68020
 	bool "68020 support"
 	help
 	  If you anticipate running this kernel on a computer with a MC68020
 	  processor, say Y. Otherwise, say N. Note that the 68020 requires a
 	  68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
 	  Sun 3, which provides its own version.

 config M68030
 	bool "68030 support"
 	depends on !MMU_SUN3
 	help
 	  If you anticipate running this kernel on a computer with a MC68030
 	  processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
 	  work, as it does not include an MMU (Memory Management Unit).

 config M68040
 	bool "68040 support"
 	depends on !MMU_SUN3
 	help
 	  If you anticipate running this kernel on a computer with a MC68LC040
 	  or MC68040 processor, say Y. Otherwise, say N. Note that an
 	  MC68EC040 will not work, as it does not include an MMU (Memory
 	  Management Unit).

 config M68060
 	bool "68060 support"
 	depends on !MMU_SUN3
 	help
 	  If you anticipate running this kernel on a computer with a MC68060
 	  processor, say Y. Otherwise, say N.

 config MMU_MOTOROLA
 	bool
 	depends on MMU && !MMU_SUN3
 	default y

 config MMU_SUN3
 	bool

 config M68KFPU_EMU
 	bool "Math emulation support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	help
 	  At some point in the future, this will cause floating-point math
 	  instructions to be emulated by the kernel on machines that lack a
 	  floating-point math coprocessor.  Thrill-seekers and chronically
 	  sleep-deprived psychotic hacker types can say Y now, everyone else
 	  should probably wait a while.

 config M68KFPU_EMU_EXTRAPREC
 	bool "Math emulation extra precision"
 	depends on M68KFPU_EMU
 	help
 	  The fpu uses normally a few bit more during calculations for
 	  correct rounding, the emulator can (often) do the same but this
 	  extra calculation can cost quite some time, so you can disable
 	  it here. The emulator will then "only" calculate with a 64 bit
 	  mantissa and round slightly incorrect, what is more then enough
 	  for normal usage.

 config M68KFPU_EMU_ONLY
 	bool "Math emulation only kernel"
 	depends on M68KFPU_EMU
 	help
 	  This option prevents any floating-point instructions from being
 	  compiled into the kernel, thereby the kernel doesn't save any
 	  floating point context anymore during task switches, so this
 	  kernel will only be usable on machines without a floating-point
 	  math coprocessor. This makes the kernel a bit faster as no tests
 	  needs to be executed whether a floating-point instruction in the
 	  kernel should be executed or not.

 config ADVANCED
 	bool "Advanced configuration options"
 	---help---
 	  This gives you access to some advanced options for the CPU. The
 	  defaults should be fine for most users, but these options may make
 	  it possible for you to improve performance somewhat if you know what
 	  you are doing.

 	  Note that the answer to this question won't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
 	  the questions about these options.

 	  Most users should say N to this question.

 config RMW_INSNS
 	bool "Use read-modify-write instructions"
 	depends on ADVANCED
 	---help---
 	  This allows to use certain instructions that work with indivisible
 	  read-modify-write bus cycles. While this is faster than the
 	  workaround of disabling interrupts, it can conflict with DMA
 	  ( = direct memory access) on many Amiga systems, and it is also said
 	  to destabilize other machines. It is very likely that this will
 	  cause serious problems on any Amiga or Atari Medusa if set. The only
 	  configuration where it should work are 68030-based Ataris, where it
 	  apparently improves performance. But you've been warned! Unless you
 	  really know what you are doing, say N. Try Y only if you're quite
 	  adventurous.

 config SINGLE_MEMORY_CHUNK
 	bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
 	default y if SUN3
 	select NEED_MULTIPLE_NODES
 	help
 	  Ignore all but the first contiguous chunk of physical memory for VM
 	  purposes.  This will save a few bytes kernel size and may speed up
 	  some operations.  Say N if not sure.

 config 060_WRITETHROUGH
 	bool "Use write-through caching for 68060 supervisor accesses"
 	depends on ADVANCED && M68060
 	---help---
 	  The 68060 generally uses copyback caching of recently accessed data.
 	  Copyback caching means that memory writes will be held in an on-chip
 	  cache and only written back to memory some time later.  Saying Y
 	  here will force supervisor (kernel) accesses to use writethrough
 	  caching.  Writethrough caching means that data is written to memory
 	  straight away, so that cache and memory data always agree.
 	  Writethrough caching is less efficient, but is needed for some
 	  drivers on 68060 based systems where the 68060 bus snooping signal
 	  is hardwired on.  The 53c710 SCSI driver is known to suffer from
 	  this problem.

 config ARCH_DISCONTIGMEM_ENABLE
 	def_bool !SINGLE_MEMORY_CHUNK

 config NODES_SHIFT
 	int
 	default "3"
 	depends on !SINGLE_MEMORY_CHUNK

 source "mm/Kconfig"

 endmenu

 menu "General setup"

 source "fs/Kconfig.binfmt"

 config ZORRO
 	bool "Amiga Zorro (AutoConfig) bus support"
 	depends on AMIGA
 	help
 	  This enables support for the Zorro bus in the Amiga. If you have
 	  expansion cards in your Amiga that conform to the Amiga
 	  AutoConfig(tm) specification, say Y, otherwise N. Note that even
 	  expansion cards that do not fit in the Zorro slots but fit in e.g.
 	  the CPU slot may fall in this category, so you have to say Y to let
 	  Linux use these.

 config AMIGA_PCMCIA
 	bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
 	depends on AMIGA && EXPERIMENTAL
 	help
 	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
 	  600. If you intend to use pcmcia cards say Y; otherwise say N.

 config STRAM_PROC
 	bool "ST-RAM statistics in /proc"
 	depends on ATARI
 	help
 	  Say Y here to report ST-RAM usage statistics in /proc/stram.

 config HEARTBEAT
 	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
 	default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
 	help
 	  Use the power-on LED on your machine as a load meter.  The exact
 	  behavior is platform-dependent, but normally the flash frequency is
 	  a hyperbolic function of the 5-minute load average.

 # We have a dedicated heartbeat LED. :-)
 config PROC_HARDWARE
 	bool "/proc/hardware support"
 	help
 	  Say Y here to support the /proc/hardware file, which gives you
 	  access to information about the machine you're running on,
 	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
 	  and memory size.

 config ISA
 	bool
 	depends on Q40 || AMIGA_PCMCIA || GG2
 	default y
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
 	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
 	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 	  newer boards don't support it.  If you have ISA, say Y, otherwise N.

 config GENERIC_ISA_DMA
 	bool
 	depends on Q40 || AMIGA_PCMCIA || GG2
 	default y

 config ZONE_DMA
 	bool
 	default y

 source "drivers/pci/Kconfig"

 source "drivers/zorro/Kconfig"

 endmenu

 source "net/Kconfig"

 source "drivers/Kconfig"

 menu "Character devices"

 config ATARI_MFPSER
 	tristate "Atari MFP serial support"
 	depends on ATARI
 	---help---
 	  If you like to use the MFP serial ports ("Modem1", "Serial1") under
 	  Linux, say Y. The driver equally supports all kinds of MFP serial
 	  ports and automatically detects whether Serial1 is available.

 	  To compile this driver as a module, choose M here.

 	  Note for Falcon users: You also have an MFP port, it's just not
 	  wired to the outside... But you could use the port under Linux.

 config ATARI_SCC
 	tristate "Atari SCC serial support"
 	depends on ATARI
 	---help---
 	  If you have serial ports based on a Zilog SCC chip (Modem2, Serial2,
 	  LAN) and like to use them under Linux, say Y. All built-in SCC's are
 	  supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have
 	  two connectors for channel A (Serial2 and LAN), they are visible as
 	  two separate devices.

 	  To compile this driver as a module, choose M here.

 config ATARI_SCC_DMA
 	bool "Atari SCC serial DMA support"
 	depends on ATARI_SCC
 	help
 	  This enables DMA support for receiving data on channel A of the SCC.
 	  If you have a TT you may say Y here and read
 	  drivers/char/atari_SCC.README. All other users should say N here,
 	  because only the TT has SCC-DMA, even if your machine keeps claiming
 	  so at boot time.

 config ATARI_MIDI
 	tristate "Atari MIDI serial support"
 	depends on ATARI
 	help
 	  If you want to use your Atari's MIDI port in Linux, say Y.

 	  To compile this driver as a module, choose M here.

 config ATARI_DSP56K
 	tristate "Atari DSP56k support (EXPERIMENTAL)"
 	depends on ATARI && EXPERIMENTAL
 	help
 	  If you want to be able to use the DSP56001 in Falcons, say Y. This
 	  driver is still experimental, and if you don't know what it is, or
 	  if you don't have this processor, just say N.

 	  To compile this driver as a module, choose M here.

 config AMIGA_BUILTIN_SERIAL
 	tristate "Amiga builtin serial support"
 	depends on AMIGA
 	help
 	  If you want to use your Amiga's built-in serial port in Linux,
 	  answer Y.

 	  To compile this driver as a module, choose M here.

 config WHIPPET_SERIAL
 	tristate "Hisoft Whippet PCMCIA serial support"
 	depends on AMIGA_PCMCIA
 	help
 	  HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
 	  is no listing for the Whippet in their Amiga section.

 config MULTIFACE_III_TTY
 	tristate "Multiface Card III serial support"
 	depends on AMIGA
 	help
 	  If you want to use a Multiface III card's serial port in Linux,
 	  answer Y.

 	  To compile this driver as a module, choose M here.

 config GVPIOEXT
 	tristate "GVP IO-Extender support"
 	depends on PARPORT=n && ZORRO
 	help
 	  If you want to use a GVP IO-Extender serial card in Linux, say Y.
 	  Otherwise, say N.

 config GVPIOEXT_LP
 	tristate "GVP IO-Extender parallel printer support"
 	depends on GVPIOEXT
 	help
 	  Say Y to enable driving a printer from the parallel port on your
 	  GVP IO-Extender card, N otherwise.

 config GVPIOEXT_PLIP
 	tristate "GVP IO-Extender PLIP support"
 	depends on GVPIOEXT
 	help
 	  Say Y to enable doing IP over the parallel port on your GVP
 	  IO-Extender card, N otherwise.

 config MAC_SCC
 	tristate "Macintosh serial support"
 	depends on MAC

 config MAC_HID
 	bool
 	depends on INPUT_ADBHID
 	default y

 config MAC_ADBKEYCODES
 	bool "Support for ADB raw keycodes"
 	depends on INPUT_ADBHID
 	help
 	  This provides support for sending raw ADB keycodes to console
 	  devices.  This is the default up to 2.4.0, but in future this may be
 	  phased out in favor of generic Linux keycodes.  If you say Y here,
 	  you can dynamically switch via the
 	  /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
 	  sysctl and with the "keyboard_sends_linux_keycodes=" kernel
 	  argument.

 	  If unsure, say Y here.

 config ADB_KEYBOARD
 	bool "Support for ADB keyboard (old driver)"
 	depends on MAC && !INPUT_ADBHID
 	help
 	  This option allows you to use an ADB keyboard attached to your
 	  machine. Note that this disables any other (ie. PS/2) keyboard
 	  support, even if your machine is physically capable of using both at
 	  the same time.

 	  If you use an ADB keyboard (4 pin connector), say Y here.
 	  If you use a PS/2 keyboard (6 pin connector), say N here.

 config HPDCA
 	tristate "HP DCA serial support"
 	depends on DIO && SERIAL_8250
 	help
 	  If you want to use the internal "DCA" serial ports on an HP300
 	  machine, say Y here.

 config HPAPCI
 	tristate "HP APCI serial support"
 	depends on HP300 && SERIAL_8250 && EXPERIMENTAL
 	help
 	  If you want to use the internal "APCI" serial ports on an HP400
 	  machine, say Y here.

 config MVME147_SCC
 	bool "SCC support for MVME147 serial ports"
 	depends on MVME147
 	help
 	  This is the driver for the serial ports on the Motorola MVME147
 	  boards.  Everyone using one of these boards should say Y here.

 config SERIAL167
 	bool "CD2401 support for MVME166/7 serial ports"
 	depends on MVME16x
 	help
 	  This is the driver for the serial ports on the Motorola MVME166,
 	  167, and 172 boards.  Everyone using one of these boards should say
 	  Y here.

 config MVME162_SCC
 	bool "SCC support for MVME162 serial ports"
 	depends on MVME16x
 	help
 	  This is the driver for the serial ports on the Motorola MVME162 and
 	  172 boards.  Everyone using one of these boards should say Y here.

 config BVME6000_SCC
 	bool "SCC support for BVME6000 serial ports"
 	depends on BVME6000
 	help
 	  This is the driver for the serial ports on the BVME4000 and BVME6000
 	  boards from BVM Ltd.  Everyone using one of these boards should say
 	  Y here.

 config DN_SERIAL
 	bool "Support for DN serial port (dummy)"
 	depends on APOLLO

 config SERIAL_CONSOLE
 	bool "Support for serial port console"
 	depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
 	---help---
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
 	  kernel messages and warnings and which allows logins in single user
 	  mode). This could be useful if some terminal or printer is connected
 	  to that serial port.

 	  Even if you say Y here, the currently visible virtual console
 	  (/dev/tty0) will still be used as the system console by default, but
 	  you can alter that using a kernel command line option such as
 	  "console=ttyS1". (Try "man bootparam" or see the documentation of
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)

 	  If you don't have a VGA card installed and you say Y here, the
 	  kernel will automatically use the first serial line, /dev/ttyS0, as
 	  system console.

 	  If unsure, say N.

 endmenu

 source "fs/Kconfig"

 source "arch/m68k/Kconfig.debug"

 source "security/Kconfig"

 source "crypto/Kconfig"

 source "lib/Kconfig"
	#
	# For a description of the syntax of this configuration file,
	# see Documentation/kbuild/kconfig-language.txt.
	#
	config M68K
	bool
	default y

	config MMU
	bool
	default y

	config RWSEM_GENERIC_SPINLOCK
	bool
	default y

	config RWSEM_XCHGADD_ALGORITHM
	bool

	config ARCH_HAS_ILOG2_U32
	bool
	default n

	config ARCH_HAS_ILOG2_U64
	bool
	default n

	config GENERIC_HWEIGHT
	bool
	default y

	config GENERIC_CALIBRATE_DELAY
	bool
	default y

	config TIME_LOW_RES
	bool
	default y

	config ARCH_MAY_HAVE_PC_FDC
	bool
	depends on Q40 \|\| (BROKEN && SUN3X)
	default y

	config NO_IOPORT
	def_bool y

	mainmenu "Linux/68k Kernel Configuration"

	source "init/Kconfig"

	menu "Platform dependent setup"

	config EISA
	bool
	---help---
	The Extended Industry Standard Architecture (EISA) bus was
	developed as an open alternative to the IBM MicroChannel bus.

	The EISA bus provided some of the features of the IBM MicroChannel
	bus while maintaining backward compatibility with cards made for
	the older ISA bus. The EISA bus saw limited use between 1988 and
	1995 when it was made obsolete by the PCI bus.

	Say Y here if you are building a kernel for an EISA-based machine.

	Otherwise, say N.

	config MCA
	bool
	help
	MicroChannel Architecture is found in some IBM PS/2 machines and
	laptops. It is a bus system similar to PCI or ISA. See
	<file:Documentation/mca.txt> (and especially the web page given
	there) before attempting to build an MCA bus kernel.

	config PCMCIA
	tristate
	---help---
	Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
	computer. These are credit-card size devices such as network cards,
	modems or hard drives often used with laptops computers. There are
	actually two varieties of these cards: the older 16 bit PCMCIA cards
	and the newer 32 bit CardBus cards. If you want to use CardBus
	cards, you need to say Y here and also to "CardBus support" below.

	To use your PC-cards, you will need supporting software from David
	Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
	for location). Please also read the PCMCIA-HOWTO, available from
	<http://www.tldp.org/docs.html#howto>.

	To compile this driver as modules, choose M here: the
	modules will be called pcmcia_core and ds.

	config SUN3
	bool "Sun3 support"
	select M68020
	select MMU_SUN3 if MMU
	help
	This option enables support for the Sun 3 series of workstations
	(3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
	that all other hardware types must be disabled, as Sun 3 kernels
	are incompatible with all other m68k targets (including Sun 3x!).

	If you don't want to compile a kernel exclusively for a Sun 3, say N.

	config AMIGA
	bool "Amiga support"
	depends on !MMU_SUN3
	help
	This option enables support for the Amiga series of computers. If
	you plan to use this kernel on an Amiga, say Y here and browse the
	material available in <file:Documentation/m68k>; otherwise say N.

	config ATARI
	bool "Atari support"
	depends on !MMU_SUN3
	help
	This option enables support for the 68000-based Atari series of
	computers (including the TT, Falcon and Medusa). If you plan to use
	this kernel on an Atari, say Y here and browse the material
	available in <file:Documentation/m68k>; otherwise say N.

	config HADES
	bool "Hades support"
	depends on ATARI && BROKEN
	help
	This option enables support for the Hades Atari clone. If you plan
	to use this kernel on a Hades, say Y here; otherwise say N.

	config PCI
	bool
	depends on HADES
	default y
	help
	Find out whether you have a PCI motherboard. PCI is the name of a
	bus system, i.e. the way the CPU talks to the other stuff inside
	your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
	VESA. If you have PCI, say Y, otherwise N.

	The PCI-HOWTO, available from
	<http://www.tldp.org/docs.html#howto>, contains valuable
	information about which PCI hardware does work under Linux and which
	doesn't.

	config MAC
	bool "Macintosh support"
	depends on !MMU_SUN3
	help
	This option enables support for the Apple Macintosh series of
	computers (yes, there is experimental support now, at least for part
	of the series).

	Say N unless you're willing to code the remaining necessary support.
	;)

	config NUBUS
	bool
	depends on MAC
	default y

	config M68K_L2_CACHE
	bool
	depends on MAC
	default y

	config APOLLO
	bool "Apollo support"
	depends on !MMU_SUN3
	help
	Say Y here if you want to run Linux on an MC680x0-based Apollo
	Domain workstation such as the DN3500.

	config VME
	bool "VME (Motorola and BVM) support"
	depends on !MMU_SUN3
	help
	Say Y here if you want to build a kernel for a 680x0 based VME
	board. Boards currently supported include Motorola boards MVME147,
	MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and
	BVME6000 boards from BVM Ltd are also supported.

	config MVME147
	bool "MVME147 support"
	depends on VME
	help
	Say Y to include support for early Motorola VME boards. This will
	build a kernel which can run on MVME147 single-board computers. If
	you select this option you will have to select the appropriate
	drivers for SCSI, Ethernet and serial ports later on.

	config MVME16x
	bool "MVME162, 166 and 167 support"
	depends on VME
	help
	Say Y to include support for Motorola VME boards. This will build a
	kernel which can run on MVME162, MVME166, MVME167, MVME172, and
	MVME177 boards. If you select this option you will have to select
	the appropriate drivers for SCSI, Ethernet and serial ports later
	on.

	config BVME6000
	bool "BVME4000 and BVME6000 support"
	depends on VME
	help
	Say Y to include support for VME boards from BVM Ltd. This will
	build a kernel which can run on BVME4000 and BVME6000 boards. If
	you select this option you will have to select the appropriate
	drivers for SCSI, Ethernet and serial ports later on.

	config HP300
	bool "HP9000/300 and HP9000/400 support"
	depends on !MMU_SUN3
	help
	This option enables support for the HP9000/300 and HP9000/400 series
	of workstations. Support for these machines is still somewhat
	experimental. If you plan to try to use the kernel on such a machine
	say Y here.
	Everybody else says N.

	config DIO
	bool "DIO bus support"
	depends on HP300
	default y
	help
	Say Y here to enable support for the "DIO" expansion bus used in
	HP300 machines. If you are using such a system you almost certainly
	want this.

	config SUN3X
	bool "Sun3x support"
	depends on !MMU_SUN3
	select M68030
	help
	This option enables support for the Sun 3x series of workstations.
	Be warned that this support is very experimental.
	Note that Sun 3x kernels are not compatible with Sun 3 hardware.
	General Linux information on the Sun 3x series (now discontinued)
	is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.

	If you don't want to compile a kernel for a Sun 3x, say N.

	config Q40
	bool "Q40/Q60 support"
	depends on !MMU_SUN3
	help
	The Q40 is a Motorola 68040-based successor to the Sinclair QL
	manufactured in Germany. There is an official Q40 home page at
	<http://www.q40.de/>. This option enables support for the Q40 and
	Q60. Select your CPU below. For 68LC060 don't forget to enable FPU
	emulation.

	comment "Processor type"

	config M68020
	bool "68020 support"
	help
	If you anticipate running this kernel on a computer with a MC68020
	processor, say Y. Otherwise, say N. Note that the 68020 requires a
	68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
	Sun 3, which provides its own version.

	config M68030
	bool "68030 support"
	depends on !MMU_SUN3
	help
	If you anticipate running this kernel on a computer with a MC68030
	processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
	work, as it does not include an MMU (Memory Management Unit).

	config M68040
	bool "68040 support"
	depends on !MMU_SUN3
	help
	If you anticipate running this kernel on a computer with a MC68LC040
	or MC68040 processor, say Y. Otherwise, say N. Note that an
	MC68EC040 will not work, as it does not include an MMU (Memory
	Management Unit).

	config M68060
	bool "68060 support"
	depends on !MMU_SUN3
	help
	If you anticipate running this kernel on a computer with a MC68060
	processor, say Y. Otherwise, say N.

	config MMU_MOTOROLA
	bool
	depends on MMU && !MMU_SUN3
	default y

	config MMU_SUN3
	bool

	config M68KFPU_EMU
	bool "Math emulation support (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	help
	At some point in the future, this will cause floating-point math
	instructions to be emulated by the kernel on machines that lack a
	floating-point math coprocessor. Thrill-seekers and chronically
	sleep-deprived psychotic hacker types can say Y now, everyone else
	should probably wait a while.

	config M68KFPU_EMU_EXTRAPREC
	bool "Math emulation extra precision"
	depends on M68KFPU_EMU
	help
	The fpu uses normally a few bit more during calculations for
	correct rounding, the emulator can (often) do the same but this
	extra calculation can cost quite some time, so you can disable
	it here. The emulator will then "only" calculate with a 64 bit
	mantissa and round slightly incorrect, what is more then enough
	for normal usage.

	config M68KFPU_EMU_ONLY
	bool "Math emulation only kernel"
	depends on M68KFPU_EMU
	help
	This option prevents any floating-point instructions from being
	compiled into the kernel, thereby the kernel doesn't save any
	floating point context anymore during task switches, so this
	kernel will only be usable on machines without a floating-point
	math coprocessor. This makes the kernel a bit faster as no tests
	needs to be executed whether a floating-point instruction in the
	kernel should be executed or not.

	config ADVANCED
	bool "Advanced configuration options"
	---help---
	This gives you access to some advanced options for the CPU. The
	defaults should be fine for most users, but these options may make
	it possible for you to improve performance somewhat if you know what
	you are doing.

	Note that the answer to this question won't directly affect the
	kernel: saying N will just cause the configurator to skip all
	the questions about these options.

	Most users should say N to this question.

	config RMW_INSNS
	bool "Use read-modify-write instructions"
	depends on ADVANCED
	---help---
	This allows to use certain instructions that work with indivisible
	read-modify-write bus cycles. While this is faster than the
	workaround of disabling interrupts, it can conflict with DMA
	( = direct memory access) on many Amiga systems, and it is also said
	to destabilize other machines. It is very likely that this will
	cause serious problems on any Amiga or Atari Medusa if set. The only
	configuration where it should work are 68030-based Ataris, where it
	apparently improves performance. But you've been warned! Unless you
	really know what you are doing, say N. Try Y only if you're quite
	adventurous.

	config SINGLE_MEMORY_CHUNK
	bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
	default y if SUN3
	select NEED_MULTIPLE_NODES
	help
	Ignore all but the first contiguous chunk of physical memory for VM
	purposes. This will save a few bytes kernel size and may speed up
	some operations. Say N if not sure.

	config 060_WRITETHROUGH
	bool "Use write-through caching for 68060 supervisor accesses"
	depends on ADVANCED && M68060
	---help---
	The 68060 generally uses copyback caching of recently accessed data.
	Copyback caching means that memory writes will be held in an on-chip
	cache and only written back to memory some time later. Saying Y
	here will force supervisor (kernel) accesses to use writethrough
	caching. Writethrough caching means that data is written to memory
	straight away, so that cache and memory data always agree.
	Writethrough caching is less efficient, but is needed for some
	drivers on 68060 based systems where the 68060 bus snooping signal
	is hardwired on. The 53c710 SCSI driver is known to suffer from
	this problem.

	config ARCH_DISCONTIGMEM_ENABLE
	def_bool !SINGLE_MEMORY_CHUNK

	config NODES_SHIFT
	int
	default "3"
	depends on !SINGLE_MEMORY_CHUNK

	source "mm/Kconfig"

	endmenu

	menu "General setup"

	source "fs/Kconfig.binfmt"

	config ZORRO
	bool "Amiga Zorro (AutoConfig) bus support"
	depends on AMIGA
	help
	This enables support for the Zorro bus in the Amiga. If you have
	expansion cards in your Amiga that conform to the Amiga
	AutoConfig(tm) specification, say Y, otherwise N. Note that even
	expansion cards that do not fit in the Zorro slots but fit in e.g.
	the CPU slot may fall in this category, so you have to say Y to let
	Linux use these.

	config AMIGA_PCMCIA
	bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
	depends on AMIGA && EXPERIMENTAL
	help
	Include support in the kernel for pcmcia on Amiga 1200 and Amiga
	600. If you intend to use pcmcia cards say Y; otherwise say N.

	config STRAM_PROC
	bool "ST-RAM statistics in /proc"
	depends on ATARI
	help
	Say Y here to report ST-RAM usage statistics in /proc/stram.

	config HEARTBEAT
	bool "Use power LED as a heartbeat" if AMIGA \|\| APOLLO \|\| ATARI \|\| MAC \|\|Q40
	default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
	help
	Use the power-on LED on your machine as a load meter. The exact
	behavior is platform-dependent, but normally the flash frequency is
	a hyperbolic function of the 5-minute load average.

	# We have a dedicated heartbeat LED. :-)
	config PROC_HARDWARE
	bool "/proc/hardware support"
	help
	Say Y here to support the /proc/hardware file, which gives you
	access to information about the machine you're running on,
	including the model, CPU, MMU, clock speed, BogoMIPS rating,
	and memory size.

	config ISA
	bool
	depends on Q40 \|\| AMIGA_PCMCIA \|\| GG2
	default y
	help
	Find out whether you have ISA slots on your motherboard. ISA is the
	name of a bus system, i.e. the way the CPU talks to the other stuff
	inside your box. Other bus systems are PCI, EISA, MicroChannel
	(MCA) or VESA. ISA is an older system, now being displaced by PCI;
	newer boards don't support it. If you have ISA, say Y, otherwise N.

	config GENERIC_ISA_DMA
	bool
	depends on Q40 \|\| AMIGA_PCMCIA \|\| GG2
	default y

	config ZONE_DMA
	bool
	default y

	source "drivers/pci/Kconfig"

	source "drivers/zorro/Kconfig"

	endmenu

	source "net/Kconfig"

	source "drivers/Kconfig"

	menu "Character devices"

	config ATARI_MFPSER
	tristate "Atari MFP serial support"
	depends on ATARI
	---help---
	If you like to use the MFP serial ports ("Modem1", "Serial1") under
	Linux, say Y. The driver equally supports all kinds of MFP serial
	ports and automatically detects whether Serial1 is available.

	To compile this driver as a module, choose M here.

	Note for Falcon users: You also have an MFP port, it's just not
	wired to the outside... But you could use the port under Linux.

	config ATARI_SCC
	tristate "Atari SCC serial support"
	depends on ATARI
	---help---
	If you have serial ports based on a Zilog SCC chip (Modem2, Serial2,
	LAN) and like to use them under Linux, say Y. All built-in SCC's are
	supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have
	two connectors for channel A (Serial2 and LAN), they are visible as
	two separate devices.

	To compile this driver as a module, choose M here.

	config ATARI_SCC_DMA
	bool "Atari SCC serial DMA support"
	depends on ATARI_SCC
	help
	This enables DMA support for receiving data on channel A of the SCC.
	If you have a TT you may say Y here and read
	drivers/char/atari_SCC.README. All other users should say N here,
	because only the TT has SCC-DMA, even if your machine keeps claiming
	so at boot time.

	config ATARI_MIDI
	tristate "Atari MIDI serial support"
	depends on ATARI
	help
	If you want to use your Atari's MIDI port in Linux, say Y.

	To compile this driver as a module, choose M here.

	config ATARI_DSP56K
	tristate "Atari DSP56k support (EXPERIMENTAL)"
	depends on ATARI && EXPERIMENTAL
	help
	If you want to be able to use the DSP56001 in Falcons, say Y. This
	driver is still experimental, and if you don't know what it is, or
	if you don't have this processor, just say N.

	To compile this driver as a module, choose M here.

	config AMIGA_BUILTIN_SERIAL
	tristate "Amiga builtin serial support"
	depends on AMIGA
	help
	If you want to use your Amiga's built-in serial port in Linux,
	answer Y.

	To compile this driver as a module, choose M here.

	config WHIPPET_SERIAL
	tristate "Hisoft Whippet PCMCIA serial support"
	depends on AMIGA_PCMCIA
	help
	HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
	is no listing for the Whippet in their Amiga section.

	config MULTIFACE_III_TTY
	tristate "Multiface Card III serial support"
	depends on AMIGA
	help
	If you want to use a Multiface III card's serial port in Linux,
	answer Y.

	To compile this driver as a module, choose M here.

	config GVPIOEXT
	tristate "GVP IO-Extender support"
	depends on PARPORT=n && ZORRO
	help
	If you want to use a GVP IO-Extender serial card in Linux, say Y.
	Otherwise, say N.

	config GVPIOEXT_LP
	tristate "GVP IO-Extender parallel printer support"
	depends on GVPIOEXT
	help
	Say Y to enable driving a printer from the parallel port on your
	GVP IO-Extender card, N otherwise.

	config GVPIOEXT_PLIP
	tristate "GVP IO-Extender PLIP support"
	depends on GVPIOEXT
	help
	Say Y to enable doing IP over the parallel port on your GVP
	IO-Extender card, N otherwise.

	config MAC_SCC
	tristate "Macintosh serial support"
	depends on MAC

	config MAC_HID
	bool
	depends on INPUT_ADBHID
	default y

	config MAC_ADBKEYCODES
	bool "Support for ADB raw keycodes"
	depends on INPUT_ADBHID
	help
	This provides support for sending raw ADB keycodes to console
	devices. This is the default up to 2.4.0, but in future this may be
	phased out in favor of generic Linux keycodes. If you say Y here,
	you can dynamically switch via the
	/proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
	sysctl and with the "keyboard_sends_linux_keycodes=" kernel
	argument.

	If unsure, say Y here.

	config ADB_KEYBOARD
	bool "Support for ADB keyboard (old driver)"
	depends on MAC && !INPUT_ADBHID
	help
	This option allows you to use an ADB keyboard attached to your
	machine. Note that this disables any other (ie. PS/2) keyboard
	support, even if your machine is physically capable of using both at
	the same time.

	If you use an ADB keyboard (4 pin connector), say Y here.
	If you use a PS/2 keyboard (6 pin connector), say N here.

	config HPDCA
	tristate "HP DCA serial support"
	depends on DIO && SERIAL_8250
	help
	If you want to use the internal "DCA" serial ports on an HP300
	machine, say Y here.

	config HPAPCI
	tristate "HP APCI serial support"
	depends on HP300 && SERIAL_8250 && EXPERIMENTAL
	help
	If you want to use the internal "APCI" serial ports on an HP400
	machine, say Y here.

	config MVME147_SCC
	bool "SCC support for MVME147 serial ports"
	depends on MVME147
	help
	This is the driver for the serial ports on the Motorola MVME147
	boards. Everyone using one of these boards should say Y here.

	config SERIAL167
	bool "CD2401 support for MVME166/7 serial ports"
	depends on MVME16x
	help
	This is the driver for the serial ports on the Motorola MVME166,
	167, and 172 boards. Everyone using one of these boards should say
	Y here.

	config MVME162_SCC
	bool "SCC support for MVME162 serial ports"
	depends on MVME16x
	help
	This is the driver for the serial ports on the Motorola MVME162 and
	172 boards. Everyone using one of these boards should say Y here.

	config BVME6000_SCC
	bool "SCC support for BVME6000 serial ports"
	depends on BVME6000
	help
	This is the driver for the serial ports on the BVME4000 and BVME6000
	boards from BVM Ltd. Everyone using one of these boards should say
	Y here.

	config DN_SERIAL
	bool "Support for DN serial port (dummy)"
	depends on APOLLO

	config SERIAL_CONSOLE
	bool "Support for serial port console"
	depends on (AMIGA \|\| ATARI \|\| MAC \|\| SUN3 \|\| SUN3X \|\| VME \|\| APOLLO) && (ATARI_MFPSER=y \|\| ATARI_SCC=y \|\| ATARI_MIDI=y \|\| MAC_SCC=y \|\| AMIGA_BUILTIN_SERIAL=y \|\| GVPIOEXT=y \|\| MULTIFACE_III_TTY=y \|\| SERIAL=y \|\| MVME147_SCC \|\| SERIAL167 \|\| MVME162_SCC \|\| BVME6000_SCC \|\| DN_SERIAL)
	---help---
	If you say Y here, it will be possible to use a serial port as the
	system console (the system console is the device which receives all
	kernel messages and warnings and which allows logins in single user
	mode). This could be useful if some terminal or printer is connected
	to that serial port.

	Even if you say Y here, the currently visible virtual console
	(/dev/tty0) will still be used as the system console by default, but
	you can alter that using a kernel command line option such as
	"console=ttyS1". (Try "man bootparam" or see the documentation of
	your boot loader (lilo or loadlin) about how to pass options to the
	kernel at boot time.)

	If you don't have a VGA card installed and you say Y here, the
	kernel will automatically use the first serial line, /dev/ttyS0, as
	system console.

	If unsure, say N.

	endmenu

	source "fs/Kconfig"

	source "arch/m68k/Kconfig.debug"

	source "security/Kconfig"

	source "crypto/Kconfig"

	source "lib/Kconfig"