Merge branch 'master' into upstream
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 15fc8fb..4820366 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -259,9 +259,9 @@
}
sub nxt2002 {
- my $sourcefile = "Broadband4PC_4_2_11.zip";
+ my $sourcefile = "Technisat_DVB-PC_4_4_COMPACT.zip";
my $url = "http://www.bbti.us/download/windows/$sourcefile";
- my $hash = "c6d2ea47a8f456d887ada0cfb718ff2a";
+ my $hash = "476befae8c7c1bb9648954060b1eec1f";
my $outfile = "dvb-fe-nxt2002.fw";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@@ -269,8 +269,8 @@
wgetfile($sourcefile, $url);
unzip($sourcefile, $tmpdir);
- verify("$tmpdir/SkyNETU.sys", $hash);
- extract("$tmpdir/SkyNETU.sys", 375832, 5908, $outfile);
+ verify("$tmpdir/SkyNET.sys", $hash);
+ extract("$tmpdir/SkyNET.sys", 331624, 5908, $outfile);
$outfile;
}
diff --git a/Documentation/firmware_class/README b/Documentation/firmware_class/README
index 43e836c..e9cc8bb 100644
--- a/Documentation/firmware_class/README
+++ b/Documentation/firmware_class/README
@@ -105,20 +105,3 @@
on the setup, so I think that the choice on what firmware to make
persistent should be left to userspace.
- - Why register_firmware()+__init can be useful:
- - For boot devices needing firmware.
- - To make the transition easier:
- The firmware can be declared __init and register_firmware()
- called on module_init. Then the firmware is warranted to be
- there even if "firmware hotplug userspace" is not there yet or
- it doesn't yet provide the needed firmware.
- Once the firmware is widely available in userspace, it can be
- removed from the kernel. Or made optional (CONFIG_.*_FIRMWARE).
-
- In either case, if firmware hotplug support is there, it can move the
- firmware out of kernel memory into the real filesystem for later
- usage.
-
- Note: If persistence is implemented on top of initramfs,
- register_firmware() may not be appropriate.
-
diff --git a/Documentation/firmware_class/firmware_sample_driver.c b/Documentation/firmware_class/firmware_sample_driver.c
index ad3edab..87feccd 100644
--- a/Documentation/firmware_class/firmware_sample_driver.c
+++ b/Documentation/firmware_class/firmware_sample_driver.c
@@ -5,8 +5,6 @@
*
* Sample code on how to use request_firmware() from drivers.
*
- * Note that register_firmware() is currently useless.
- *
*/
#include <linux/module.h>
@@ -17,11 +15,6 @@
#include "linux/firmware.h"
-#define WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-#ifdef WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-char __init inkernel_firmware[] = "let's say that this is firmware\n";
-#endif
-
static struct device ghost_device = {
.bus_id = "ghost0",
};
@@ -104,10 +97,6 @@
static int sample_init(void)
{
-#ifdef WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
- register_firmware("sample_driver_fw", inkernel_firmware,
- sizeof(inkernel_firmware));
-#endif
device_initialize(&ghost_device);
/* since there is no real hardware insertion I just call the
* sample probe functions here */
diff --git a/MAINTAINERS b/MAINTAINERS
index 753584c..bd10b2a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -40,11 +40,20 @@
PLEASE document known bugs. If it doesn't work for everything
or does something very odd once a month document it.
+ PLEASE remember that submissions must be made under the terms
+ of the OSDL certificate of contribution
+ (http://www.osdl.org/newsroom/press_releases/2004/2004_05_24_dco.html)
+ and should include a Signed-off-by: line.
+
6. Make sure you have the right to send any changes you make. If you
do changes at work you may find your employer owns the patch
not you.
-7. Happy hacking.
+7. When sending security related changes or reports to a maintainer
+ please Cc: security@kernel.org, especially if the maintainer
+ does not respond.
+
+8. Happy hacking.
-----------------------------------
@@ -969,7 +978,7 @@
EXT3 FILE SYSTEM
P: Stephen Tweedie, Andrew Morton
M: sct@redhat.com, akpm@osdl.org, adilger@clusterfs.com
-L: ext3-users@redhat.com
+L: ext2-devel@lists.sourceforge.net
S: Maintained
F71805F HARDWARE MONITORING DRIVER
@@ -1530,12 +1539,28 @@
T: git kernel.org:/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
S: Supported
+JOURNALLING LAYER FOR BLOCK DEVICS (JBD)
+P: Stephen Tweedie, Andrew Morton
+M: sct@redhat.com, akpm@osdl.org
+L: ext2-devel@lists.sourceforge.net
+S: Maintained
+
KCONFIG
P: Roman Zippel
M: zippel@linux-m68k.org
L: kbuild-devel@lists.sourceforge.net
S: Maintained
+KDUMP
+P: Vivek Goyal
+M: vgoyal@in.ibm.com
+P: Haren Myneni
+M: hbabu@us.ibm.com
+L: fastboot@lists.osdl.org
+L: linux-kernel@vger.kernel.org
+W: http://lse.sourceforge.net/kdump/
+S: Maintained
+
KERNEL AUTOMOUNTER (AUTOFS)
P: H. Peter Anvin
M: hpa@zytor.com
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 013b85d..3d4b2f3 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -1341,6 +1341,14 @@
connect_bsp_APIC();
+ /*
+ * Hack: In case of kdump, after a crash, kernel might be booting
+ * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
+ * might be zero if read from MP tables. Get it from LAPIC.
+ */
+#ifdef CONFIG_CRASH_DUMP
+ boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+#endif
phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
setup_local_APIC();
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 2d22f57..0e49836 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -130,9 +130,8 @@
print_symbol("%s", addr);
printed = (printed + 1) % CONFIG_STACK_BACKTRACE_COLS;
-
if (printed)
- printk(" ");
+ printk(" ");
else
printk("\n");
@@ -212,7 +211,6 @@
}
stack = esp;
- printk(log_lvl);
for(i = 0; i < kstack_depth_to_print; i++) {
if (kstack_end(stack))
break;
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index ae6534a..3df1371 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -651,7 +651,7 @@
* Specifically, in the case of x86, we will always add
* memory to the highmem for now.
*/
-#ifdef CONFIG_HOTPLUG_MEMORY
+#ifdef CONFIG_MEMORY_HOTPLUG
#ifndef CONFIG_NEED_MULTIPLE_NODES
int add_memory(u64 start, u64 size)
{
diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c
index 50a0bef..79b2370 100644
--- a/arch/i386/power/cpu.c
+++ b/arch/i386/power/cpu.c
@@ -92,7 +92,7 @@
write_cr4(ctxt->cr4);
write_cr3(ctxt->cr3);
write_cr2(ctxt->cr2);
- write_cr2(ctxt->cr0);
+ write_cr0(ctxt->cr0);
/*
* now restore the descriptor tables to their proper values
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index cf56a1d..26ed1f5 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -338,6 +338,8 @@
SYSCALL(readlinkat)
SYSCALL(fchmodat)
SYSCALL(faccessat)
+COMPAT_SYS(get_robust_list)
+COMPAT_SYS(set_robust_list)
/*
* please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index 95b3643..b47fcc5 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -258,6 +258,7 @@
[__NR_futex] sys_futex,
[__NR_sched_setaffinity] sys_sched_setaffinity,
[__NR_sched_getaffinity] sys_sched_getaffinity,
+ [224] sys_ni_syscall,
[__NR_tuxcall] sys_ni_syscall,
[226] sys_ni_syscall,
[__NR_io_setup] sys_io_setup,
@@ -332,19 +333,21 @@
[__NR_readlinkat] sys_readlinkat,
[__NR_fchmodat] sys_fchmodat,
[__NR_faccessat] sys_faccessat,
+ [__NR_get_robust_list] sys_get_robust_list,
+ [__NR_set_robust_list] sys_set_robust_list,
};
long spu_sys_callback(struct spu_syscall_block *s)
{
long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
- syscall = spu_syscall_table[s->nr_ret];
-
if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
return -ENOSYS;
}
+ syscall = spu_syscall_table[s->nr_ret];
+
#ifdef DEBUG
print_symbol(KERN_DEBUG "SPU-syscall %s:", (unsigned long)syscall);
printk("syscall%ld(%lx, %lx, %lx, %lx, %lx, %lx)\n",
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 029f099..ce19ad4 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -272,7 +272,7 @@
next = next_timer_interrupt();
do {
seq = read_seqbegin_irqsave(&xtime_lock, flags);
- timer = (__u64)(next - jiffies) + jiffies_64;
+ timer = (__u64 next) - (__u64 jiffies) + jiffies_64;
} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
todval = -1ULL;
/* Be careful about overflows. */
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index 6e1135c..2856551 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -79,6 +79,7 @@
/*285*/ .long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
/*290*/ .long sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
/*295*/ .long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
+/*300*/ .long sys_set_robust_list, sys_get_robust_list
#ifdef CONFIG_SUNOS_EMUL
/* Now the SunOS syscall table. */
@@ -190,6 +191,6 @@
/*290*/ .long sunos_nosys, sunos_nosys, sunos_nosys
.long sunos_nosys, sunos_nosys, sunos_nosys
.long sunos_nosys, sunos_nosys, sunos_nosys
- .long sunos_nosys
+ .long sunos_nosys, sunos_nosys, sunos_nosys
#endif
diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c
index 8efbc13..82e5455 100644
--- a/arch/sparc64/kernel/pci_iommu.c
+++ b/arch/sparc64/kernel/pci_iommu.c
@@ -218,7 +218,7 @@
* DMA for PCI device PDEV. Return non-NULL cpu-side address if
* successful and set *DMA_ADDRP to the PCI side dma address.
*/
-static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp)
{
struct pcidev_cookie *pcp;
struct pci_iommu *iommu;
@@ -232,7 +232,7 @@
if (order >= 10)
return NULL;
- first_page = __get_free_pages(GFP_ATOMIC, order);
+ first_page = __get_free_pages(gfp, order);
if (first_page == 0UL)
return NULL;
memset((char *)first_page, 0, PAGE_SIZE << order);
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index 9e94db2..2b7a1f3 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -154,7 +154,7 @@
__clear_bit(i, arena->map);
}
-static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp)
{
struct pcidev_cookie *pcp;
struct pci_iommu *iommu;
@@ -169,7 +169,7 @@
npages = size >> IO_PAGE_SHIFT;
- first_page = __get_free_pages(GFP_ATOMIC, order);
+ first_page = __get_free_pages(gfp, order);
if (unlikely(first_page == 0UL))
return NULL;
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index d4b39cd..1136fc4 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -78,8 +78,9 @@
.word compat_sys_mq_timedsend, compat_sys_mq_timedreceive, compat_sys_mq_notify, compat_sys_mq_getsetattr, compat_sys_waitid
/*280*/ .word sys32_tee, sys_add_key, sys_request_key, sys_keyctl, compat_sys_openat
.word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_fstatat64
-/*285*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
+/*290*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
.word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare
+/*300*/ .word compat_sys_set_robust_list, compat_sys_get_robust_list
#endif /* CONFIG_COMPAT */
@@ -147,8 +148,9 @@
.word sys_mq_timedsend, sys_mq_timedreceive, sys_mq_notify, sys_mq_getsetattr, sys_waitid
/*280*/ .word sys_tee, sys_add_key, sys_request_key, sys_keyctl, sys_openat
.word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
-/*285*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
+/*290*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
.word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
+/*300*/ .word sys_set_robust_list, sys_get_robust_list
#if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
defined(CONFIG_SOLARIS_EMUL_MODULE)
@@ -261,5 +263,5 @@
/*290*/ .word sunos_nosys, sunos_nosys, sunos_nosys
.word sunos_nosys, sunos_nosys, sunos_nosys
.word sunos_nosys, sunos_nosys, sunos_nosys
- .word sunos_nosys
+ .word sunos_nosys, sunos_nosys, sunos_nosys
#endif
diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c
index 1eaa5da..fa1d19c 100644
--- a/arch/x86_64/kernel/kprobes.c
+++ b/arch/x86_64/kernel/kprobes.c
@@ -514,13 +514,13 @@
*tos = orig_rip + (*tos - copy_rip);
break;
case 0xff:
- if ((*insn & 0x30) == 0x10) {
+ if ((insn[1] & 0x30) == 0x10) {
/* call absolute, indirect */
/* Fix return addr; rip is correct. */
next_rip = regs->rip;
*tos = orig_rip + (*tos - copy_rip);
- } else if (((*insn & 0x31) == 0x20) || /* jmp near, absolute indirect */
- ((*insn & 0x31) == 0x21)) { /* jmp far, absolute indirect */
+ } else if (((insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */
+ ((insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */
/* rip is correct. */
next_rip = regs->rip;
}
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index eac48be..7eb36c5 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -3452,7 +3452,12 @@
if (unlikely(laptop_mode) && blk_fs_request(req))
laptop_io_completion();
- if (disk && blk_fs_request(req)) {
+ /*
+ * Account IO completion. bar_rq isn't accounted as a normal
+ * IO on queueing nor completion. Accounting the containing
+ * request is enough.
+ */
+ if (disk && blk_fs_request(req) && req != &req->q->bar_rq) {
unsigned long duration = jiffies - req->start_time;
const int rw = rq_data_dir(req);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 4723182..0c99ae6 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -86,18 +86,9 @@
static CLASS_ATTR(timeout, 0644, firmware_timeout_show, firmware_timeout_store);
static void fw_class_dev_release(struct class_device *class_dev);
-int firmware_class_uevent(struct class_device *dev, char **envp,
- int num_envp, char *buffer, int buffer_size);
-static struct class firmware_class = {
- .name = "firmware",
- .uevent = firmware_class_uevent,
- .release = fw_class_dev_release,
-};
-
-int
-firmware_class_uevent(struct class_device *class_dev, char **envp,
- int num_envp, char *buffer, int buffer_size)
+static int firmware_class_uevent(struct class_device *class_dev, char **envp,
+ int num_envp, char *buffer, int buffer_size)
{
struct firmware_priv *fw_priv = class_get_devdata(class_dev);
int i = 0, len = 0;
@@ -116,6 +107,12 @@
return 0;
}
+static struct class firmware_class = {
+ .name = "firmware",
+ .uevent = firmware_class_uevent,
+ .release = fw_class_dev_release,
+};
+
static ssize_t
firmware_loading_show(struct class_device *class_dev, char *buf)
{
@@ -493,25 +490,6 @@
}
}
-/**
- * register_firmware: - provide a firmware image for later usage
- * @name: name of firmware image file
- * @data: buffer pointer for the firmware image
- * @size: size of the data buffer area
- *
- * Make sure that @data will be available by requesting firmware @name.
- *
- * Note: This will not be possible until some kind of persistence
- * is available.
- **/
-void
-register_firmware(const char *name, const u8 *data, size_t size)
-{
- /* This is meaningless without firmware caching, so until we
- * decide if firmware caching is reasonable just leave it as a
- * noop */
-}
-
/* Async support */
struct firmware_work {
struct work_struct work;
@@ -630,4 +608,3 @@
EXPORT_SYMBOL(release_firmware);
EXPORT_SYMBOL(request_firmware);
EXPORT_SYMBOL(request_firmware_nowait);
-EXPORT_SYMBOL(register_firmware);
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index f07637a..a88b94a 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -398,7 +398,7 @@
while (unlikely(size > copied));
return copied;
}
-EXPORT_SYMBOL_GPL(tty_insert_flip_string_flags);
+EXPORT_SYMBOL(tty_insert_flip_string_flags);
void tty_schedule_flip(struct tty_struct *tty)
{
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 78e30f8..ffca8b6 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -553,6 +553,8 @@
if (irq != NULL)
*irq = pmac_ide[ix].irq;
+
+ hw->dev = &pmac_ide[ix].mdev->ofdev.dev;
}
#define PMAC_IDE_REG(x) ((void __iomem *)(IDE_DATA_REG+(x)))
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 3585fb1..2ac9024 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -2880,7 +2880,7 @@
p[0]++;
i = 0;
while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) &&
- (i < ISDN_LMSNLEN))
+ (i < ISDN_LMSNLEN - 1))
m->lmsn[i++] = *p[0]++;
m->lmsn[i] = '\0';
break;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index d7316b8..3ca3cfb 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2252,7 +2252,7 @@
} else {
if (cmd_match(page, "check"))
set_bit(MD_RECOVERY_CHECK, &mddev->recovery);
- else if (cmd_match(page, "repair"))
+ else if (!cmd_match(page, "repair"))
return -EINVAL;
set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 678f4db..cb8c631 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -331,13 +331,14 @@
goto out_free_conf;
size = conf->strip_zone[cur].size;
- for (i=0; i< nb_zone; i++) {
- conf->hash_table[i] = conf->strip_zone + cur;
+ conf->hash_table[0] = conf->strip_zone + cur;
+ for (i=1; i< nb_zone; i++) {
while (size <= conf->hash_spacing) {
cur++;
size += conf->strip_zone[cur].size;
}
size -= conf->hash_spacing;
+ conf->hash_table[i] = conf->strip_zone + cur;
}
if (conf->preshift) {
conf->hash_spacing >>= conf->preshift;
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index fffc711..344d83a 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -8,22 +8,54 @@
tristate "Video For Linux"
---help---
Support for audio/video capture and overlay devices and FM radio
- cards. The exact capabilities of each device vary. User tools for
- this are available from
- <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+ cards. The exact capabilities of each device vary.
This kernel includes support for the new Video for Linux Two API,
(V4L2) as well as the original system. Drivers and applications
need to be rewritten to use V4L2, but drivers for popular cards
and applications for most video capture functions already exist.
- Documentation for the original API is included in the file
- <file:Documentation/video4linux/API.html>. Documentation for V4L2 is
- available on the web at <http://bytesex.org/v4l/>.
+ Additional info and docs are available on the web at
+ <http://linuxtv.org>
+
+ Documentation for V4L2 is also available on the web at
+ <http://bytesex.org/v4l/>.
To compile this driver as a module, choose M here: the
module will be called videodev.
+config VIDEO_V4L1
+ boolean "Enable Video For Linux API 1 (DEPRECATED)"
+ depends on VIDEO_DEV
+ select VIDEO_V4L1_COMPAT
+ default y
+ ---help---
+ Enables a compatibility API used by most V4L2 devices to allow
+ its usage with legacy applications that supports only V4L1 api.
+
+ If you are unsure as to whether this is required, answer Y.
+
+config VIDEO_V4L1_COMPAT
+ boolean "Enable Video For Linux API 1 compatible Layer"
+ depends on VIDEO_DEV
+ default y
+ ---help---
+ This api were developed to be used at Kernel 2.2 and 2.4, but
+ lacks support for several video standards. There are several
+ drivers at kernel that still depends on it.
+
+ Documentation for the original API is included in the file
+ <Documentation/video4linux/API.html>.
+
+ User tools for this are available from
+ <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+
+ If you are unsure as to whether this is required, answer Y.
+
+config VIDEO_V4L2
+ tristate
+ default y
+
source "drivers/media/video/Kconfig"
source "drivers/media/radio/Kconfig"
@@ -65,4 +97,3 @@
module will be called dabusb.
endmenu
-
diff --git a/drivers/media/common/Kconfig b/drivers/media/common/Kconfig
index 6a901a0..9c45b98 100644
--- a/drivers/media/common/Kconfig
+++ b/drivers/media/common/Kconfig
@@ -4,6 +4,7 @@
config VIDEO_SAA7146_VV
tristate
+ select VIDEO_V4L2
select VIDEO_BUF
select VIDEO_VIDEOBUF
select VIDEO_SAA7146
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index 3f0ec6b..a97c8f5 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -22,26 +22,26 @@
source "drivers/media/dvb/dvb-core/Kconfig"
comment "Supported SAA7146 based PCI Adapters"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/ttpci/Kconfig"
comment "Supported USB Adapters"
- depends on DVB_CORE && USB
+ depends on DVB_CORE && USB && I2C
source "drivers/media/dvb/dvb-usb/Kconfig"
source "drivers/media/dvb/ttusb-budget/Kconfig"
source "drivers/media/dvb/ttusb-dec/Kconfig"
source "drivers/media/dvb/cinergyT2/Kconfig"
comment "Supported FlexCopII (B2C2) Adapters"
- depends on DVB_CORE && (PCI || USB)
+ depends on DVB_CORE && (PCI || USB) && I2C
source "drivers/media/dvb/b2c2/Kconfig"
comment "Supported BT878 Adapters"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/bt8xx/Kconfig"
comment "Supported Pluto2 Adapters"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/pluto2/Kconfig"
comment "Supported DVB Frontends"
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 2963605..d7f1fd5 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -1,6 +1,6 @@
config DVB_B2C2_FLEXCOP
tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
- depends on DVB_CORE
+ depends on DVB_CORE && I2C
select DVB_STV0299
select DVB_MT352
select DVB_MT312
@@ -16,7 +16,7 @@
config DVB_B2C2_FLEXCOP_PCI
tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI"
- depends on DVB_B2C2_FLEXCOP && PCI
+ depends on DVB_B2C2_FLEXCOP && PCI && I2C
help
Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2.
@@ -24,7 +24,7 @@
config DVB_B2C2_FLEXCOP_USB
tristate "Technisat/B2C2 Air/Sky/Cable2PC USB"
- depends on DVB_B2C2_FLEXCOP && USB
+ depends on DVB_B2C2_FLEXCOP && USB && I2C
help
Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2,
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index 376ca48f..f394002 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -1,12 +1,13 @@
config DVB_BT8XX
tristate "BT8xx based PCI cards"
- depends on DVB_CORE && PCI && VIDEO_BT848
+ depends on DVB_CORE && PCI && I2C && VIDEO_BT848
select DVB_MT352
select DVB_SP887X
select DVB_NXT6000
select DVB_CX24110
select DVB_OR51211
select DVB_LGDT330X
+ select DVB_ZL10353
select FW_LOADER
help
Support for PCI cards based on the Bt8xx PCI bridge. Examples are
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index baa8227..ccc7b2e 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -115,7 +115,7 @@
return 0;
}
-static struct bt878 __init *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
+static struct bt878 __devinit *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
{
unsigned int card_nr;
@@ -709,7 +709,7 @@
}
}
-static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
+static int __devinit dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
{
int result;
@@ -794,7 +794,7 @@
return 0;
}
-static int dvb_bt8xx_probe(struct bttv_sub_device *sub)
+static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub)
{
struct dvb_bt8xx_card *card;
struct pci_dev* bttv_pci_dev;
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 71b575d..9325d03 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -902,7 +902,10 @@
return -ENOMEM;
}
- dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, THIS_MODULE);
+ if ((err = dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, THIS_MODULE)) < 0) {
+ kfree(cinergyt2);
+ return err;
+ }
cinergyt2->demux.priv = cinergyt2;
cinergyt2->demux.filternum = 256;
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 4f8f257..a051790 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -106,6 +106,8 @@
unsigned long tune_mode_flags;
unsigned int delay;
unsigned int reinitialise;
+ int tone;
+ int voltage;
/* swzigzag values */
unsigned int state;
@@ -537,6 +539,12 @@
if (fepriv->reinitialise) {
dvb_frontend_init(fe);
+ if (fepriv->tone != -1) {
+ fe->ops->set_tone(fe, fepriv->tone);
+ }
+ if (fepriv->voltage != -1) {
+ fe->ops->set_voltage(fe, fepriv->voltage);
+ }
fepriv->reinitialise = 0;
}
@@ -788,6 +796,7 @@
case FE_SET_TONE:
if (fe->ops->set_tone) {
err = fe->ops->set_tone(fe, (fe_sec_tone_mode_t) parg);
+ fepriv->tone = (fe_sec_tone_mode_t) parg;
fepriv->state = FESTATE_DISEQC;
fepriv->status = 0;
}
@@ -796,6 +805,7 @@
case FE_SET_VOLTAGE:
if (fe->ops->set_voltage) {
err = fe->ops->set_voltage(fe, (fe_sec_voltage_t) parg);
+ fepriv->voltage = (fe_sec_voltage_t) parg;
fepriv->state = FESTATE_DISEQC;
fepriv->status = 0;
}
@@ -995,6 +1005,8 @@
/* normal tune mode when opened R/W */
fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT;
+ fepriv->tone = -1;
+ fepriv->voltage = -1;
}
return ret;
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index 96fe0ec..3852430 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -219,8 +219,6 @@
return -ENOMEM;
}
- mutex_unlock(&dvbdev_register_lock);
-
memcpy(dvbdev, template, sizeof(struct dvb_device));
dvbdev->type = type;
dvbdev->id = id;
@@ -231,6 +229,8 @@
list_add_tail (&dvbdev->list_head, &adap->device_list);
+ mutex_unlock(&dvbdev_register_lock);
+
devfs_mk_cdev(MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)),
S_IFCHR | S_IRUSR | S_IWUSR,
"dvb/adapter%d/%s%d", adap->num, dnames[type], id);
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index d3df120..e388fb1 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,6 +1,6 @@
config DVB_USB
tristate "Support for various USB DVB devices"
- depends on DVB_CORE && USB
+ depends on DVB_CORE && USB && I2C
select FW_LOADER
help
By enabling this you will be able to choose the various supported
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 7edd636..1f0d3e9 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -150,6 +150,15 @@
return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0);
}
+static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ u8 b = 0;
+ if (onoff)
+ return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0);
+ else
+ return 0;
+}
+
static int cxusb_streaming_ctrl(struct dvb_usb_device *d, int onoff)
{
u8 buf[2] = { 0x03, 0x00 };
@@ -544,7 +553,7 @@
.size_of_priv = sizeof(struct cxusb_state),
.streaming_ctrl = cxusb_streaming_ctrl,
- .power_ctrl = cxusb_power_ctrl,
+ .power_ctrl = cxusb_bluebird_power_ctrl,
.frontend_attach = cxusb_lgdt3303_frontend_attach,
.tuner_attach = cxusb_lgh064f_tuner_attach,
@@ -589,7 +598,7 @@
.size_of_priv = sizeof(struct cxusb_state),
.streaming_ctrl = cxusb_streaming_ctrl,
- .power_ctrl = cxusb_power_ctrl,
+ .power_ctrl = cxusb_bluebird_power_ctrl,
.frontend_attach = cxusb_dee1601_frontend_attach,
.tuner_attach = cxusb_dee1601_tuner_attach,
@@ -638,7 +647,7 @@
.size_of_priv = sizeof(struct cxusb_state),
.streaming_ctrl = cxusb_streaming_ctrl,
- .power_ctrl = cxusb_power_ctrl,
+ .power_ctrl = cxusb_bluebird_power_ctrl,
.frontend_attach = cxusb_mt352_frontend_attach,
.tuner_attach = cxusb_lgz201_tuner_attach,
@@ -683,7 +692,7 @@
.size_of_priv = sizeof(struct cxusb_state),
.streaming_ctrl = cxusb_streaming_ctrl,
- .power_ctrl = cxusb_power_ctrl,
+ .power_ctrl = cxusb_bluebird_power_ctrl,
.frontend_attach = cxusb_mt352_frontend_attach,
.tuner_attach = cxusb_dtt7579_tuner_attach,
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index d661c6f..691dc84 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -29,6 +29,9 @@
#include "dvb_frontend.h"
#include "cx24123.h"
+#define XTAL 10111000
+
+static int force_band;
static int debug;
#define dprintk(args...) \
do { \
@@ -52,6 +55,7 @@
u32 VGAarg;
u32 bandselectarg;
u32 pllarg;
+ u32 FILTune;
/* The Demod/Tuner can't easily provide these, we cache them */
u32 currentfreq;
@@ -63,43 +67,33 @@
{
u32 symbolrate_low;
u32 symbolrate_high;
- u32 VCAslope;
- u32 VCAoffset;
- u32 VGA1offset;
- u32 VGA2offset;
u32 VCAprogdata;
u32 VGAprogdata;
+ u32 FILTune;
} cx24123_AGC_vals[] =
{
{
.symbolrate_low = 1000000,
.symbolrate_high = 4999999,
- .VCAslope = 0x07,
- .VCAoffset = 0x0f,
- .VGA1offset = 0x1f8,
- .VGA2offset = 0x1f8,
- .VGAprogdata = (2 << 18) | (0x1f8 << 9) | 0x1f8,
- .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x07,
+ /* the specs recommend other values for VGA offsets,
+ but tests show they are wrong */
+ .VGAprogdata = (1 << 19) | (0x180 << 9) | 0x1e0,
+ .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x07,
+ .FILTune = 0x27f /* 0.41 V */
},
{
.symbolrate_low = 5000000,
.symbolrate_high = 14999999,
- .VCAslope = 0x1f,
- .VCAoffset = 0x1f,
- .VGA1offset = 0x1e0,
- .VGA2offset = 0x180,
- .VGAprogdata = (2 << 18) | (0x180 << 9) | 0x1e0,
- .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x1f,
+ .VGAprogdata = (1 << 19) | (0x180 << 9) | 0x1e0,
+ .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x1f,
+ .FILTune = 0x317 /* 0.90 V */
},
{
.symbolrate_low = 15000000,
.symbolrate_high = 45000000,
- .VCAslope = 0x3f,
- .VCAoffset = 0x3f,
- .VGA1offset = 0x180,
- .VGA2offset = 0x100,
- .VGAprogdata = (2 << 18) | (0x100 << 9) | 0x180,
- .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x3f,
+ .VGAprogdata = (1 << 19) | (0x100 << 9) | 0x180,
+ .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x3f,
+ .FILTune = 0x145 /* 2.70 V */
},
};
@@ -112,91 +106,80 @@
{
u32 freq_low;
u32 freq_high;
- u32 bandselect;
u32 VCOdivider;
- u32 VCOnumber;
u32 progdata;
} cx24123_bandselect_vals[] =
{
+ /* band 1 */
{
.freq_low = 950000,
- .freq_high = 1018999,
- .bandselect = 0x40,
- .VCOdivider = 4,
- .VCOnumber = 7,
- .progdata = (0 << 18) | (0 << 9) | 0x40,
- },
- {
- .freq_low = 1019000,
.freq_high = 1074999,
- .bandselect = 0x80,
.VCOdivider = 4,
- .VCOnumber = 8,
- .progdata = (0 << 18) | (0 << 9) | 0x80,
+ .progdata = (0 << 19) | (0 << 9) | 0x40,
},
+
+ /* band 2 */
{
.freq_low = 1075000,
- .freq_high = 1227999,
- .bandselect = 0x01,
- .VCOdivider = 2,
- .VCOnumber = 1,
- .progdata = (0 << 18) | (1 << 9) | 0x01,
+ .freq_high = 1177999,
+ .VCOdivider = 4,
+ .progdata = (0 << 19) | (0 << 9) | 0x80,
},
+
+ /* band 3 */
{
- .freq_low = 1228000,
- .freq_high = 1349999,
- .bandselect = 0x02,
+ .freq_low = 1178000,
+ .freq_high = 1295999,
.VCOdivider = 2,
- .VCOnumber = 2,
- .progdata = (0 << 18) | (1 << 9) | 0x02,
+ .progdata = (0 << 19) | (1 << 9) | 0x01,
},
+
+ /* band 4 */
{
- .freq_low = 1350000,
- .freq_high = 1481999,
- .bandselect = 0x04,
+ .freq_low = 1296000,
+ .freq_high = 1431999,
.VCOdivider = 2,
- .VCOnumber = 3,
- .progdata = (0 << 18) | (1 << 9) | 0x04,
+ .progdata = (0 << 19) | (1 << 9) | 0x02,
},
+
+ /* band 5 */
{
- .freq_low = 1482000,
- .freq_high = 1595999,
- .bandselect = 0x08,
+ .freq_low = 1432000,
+ .freq_high = 1575999,
.VCOdivider = 2,
- .VCOnumber = 4,
- .progdata = (0 << 18) | (1 << 9) | 0x08,
+ .progdata = (0 << 19) | (1 << 9) | 0x04,
},
+
+ /* band 6 */
{
- .freq_low = 1596000,
+ .freq_low = 1576000,
.freq_high = 1717999,
- .bandselect = 0x10,
.VCOdivider = 2,
- .VCOnumber = 5,
- .progdata = (0 << 18) | (1 << 9) | 0x10,
+ .progdata = (0 << 19) | (1 << 9) | 0x08,
},
+
+ /* band 7 */
{
.freq_low = 1718000,
.freq_high = 1855999,
- .bandselect = 0x20,
.VCOdivider = 2,
- .VCOnumber = 6,
- .progdata = (0 << 18) | (1 << 9) | 0x20,
+ .progdata = (0 << 19) | (1 << 9) | 0x10,
},
+
+ /* band 8 */
{
.freq_low = 1856000,
.freq_high = 2035999,
- .bandselect = 0x40,
.VCOdivider = 2,
- .VCOnumber = 7,
- .progdata = (0 << 18) | (1 << 9) | 0x40,
+ .progdata = (0 << 19) | (1 << 9) | 0x20,
},
+
+ /* band 9 */
{
.freq_low = 2036000,
- .freq_high = 2149999,
- .bandselect = 0x80,
+ .freq_high = 2150000,
.VCOdivider = 2,
- .VCOnumber = 8,
- .progdata = (0 << 18) | (1 << 9) | 0x80,
+ .progdata = (0 << 19) | (1 << 9) | 0x40,
},
};
@@ -207,49 +190,44 @@
{
{0x00, 0x03}, /* Reset system */
{0x00, 0x00}, /* Clear reset */
- {0x01, 0x3b}, /* Apply sensible defaults, from an i2c sniffer */
- {0x03, 0x07},
- {0x04, 0x10},
- {0x05, 0x04},
- {0x06, 0x31},
- {0x0d, 0x02},
- {0x0e, 0x03},
- {0x0f, 0xfe},
- {0x10, 0x01},
- {0x14, 0x01},
- {0x15, 0x98},
- {0x16, 0x00},
- {0x17, 0x01},
- {0x1b, 0x05},
- {0x1c, 0x80},
- {0x1d, 0x00},
- {0x1e, 0x00},
- {0x20, 0x41},
- {0x21, 0x15},
- {0x27, 0x14},
- {0x28, 0x46},
- {0x29, 0x00},
- {0x2a, 0xb0},
- {0x2b, 0x73},
- {0x2c, 0x00},
+ {0x03, 0x07}, /* QPSK, DVB, Auto Acquisition (default) */
+ {0x04, 0x10}, /* MPEG */
+ {0x05, 0x04}, /* MPEG */
+ {0x06, 0x31}, /* MPEG (default) */
+ {0x0b, 0x00}, /* Freq search start point (default) */
+ {0x0c, 0x00}, /* Demodulator sample gain (default) */
+ {0x0d, 0x02}, /* Frequency search range = Fsymbol / 4 (default) */
+ {0x0e, 0x03}, /* Default non-inverted, FEC 3/4 (default) */
+ {0x0f, 0xfe}, /* FEC search mask (all supported codes) */
+ {0x10, 0x01}, /* Default search inversion, no repeat (default) */
+ {0x16, 0x00}, /* Enable reading of frequency */
+ {0x17, 0x01}, /* Enable EsNO Ready Counter */
+ {0x1c, 0x80}, /* Enable error counter */
+ {0x20, 0x00}, /* Tuner burst clock rate = 500KHz */
+ {0x21, 0x15}, /* Tuner burst mode, word length = 0x15 */
+ {0x28, 0x00}, /* Enable FILTERV with positive pol., DiSEqC 2.x off */
+ {0x29, 0x00}, /* DiSEqC LNB_DC off */
+ {0x2a, 0xb0}, /* DiSEqC Parameters (default) */
+ {0x2b, 0x73}, /* DiSEqC Tone Frequency (default) */
+ {0x2c, 0x00}, /* DiSEqC Message (0x2c - 0x31) */
{0x2d, 0x00},
{0x2e, 0x00},
{0x2f, 0x00},
{0x30, 0x00},
{0x31, 0x00},
- {0x32, 0x8c},
- {0x33, 0x00},
+ {0x32, 0x8c}, /* DiSEqC Parameters (default) */
+ {0x33, 0x00}, /* Interrupts off (0x33 - 0x34) */
{0x34, 0x00},
- {0x35, 0x03},
- {0x36, 0x02},
- {0x37, 0x3a},
- {0x3a, 0x00}, /* Enable AGC accumulator */
- {0x44, 0x00},
- {0x45, 0x00},
- {0x46, 0x05},
- {0x56, 0x41},
- {0x57, 0xff},
- {0x67, 0x83},
+ {0x35, 0x03}, /* DiSEqC Tone Amplitude (default) */
+ {0x36, 0x02}, /* DiSEqC Parameters (default) */
+ {0x37, 0x3a}, /* DiSEqC Parameters (default) */
+ {0x3a, 0x00}, /* Enable AGC accumulator (for signal strength) */
+ {0x44, 0x00}, /* Constellation (default) */
+ {0x45, 0x00}, /* Symbol count (default) */
+ {0x46, 0x0d}, /* Symbol rate estimator on (default) */
+ {0x56, 0x41}, /* Various (default) */
+ {0x57, 0xff}, /* Error Counter Window (default) */
+ {0x67, 0x83}, /* Non-DCII symbol clock */
};
static int cx24123_writereg(struct cx24123_state* state, int reg, int data)
@@ -258,6 +236,10 @@
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
int err;
+ if (debug>1)
+ printk("cx24123: %s: write reg 0x%02x, value 0x%02x\n",
+ __FUNCTION__,reg, data);
+
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk("%s: writereg error(err == %i, reg == 0x%02x,"
" data == 0x%02x)\n", __FUNCTION__, err, reg, data);
@@ -274,6 +256,10 @@
struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = buf, .len = 2 };
int err;
+ if (debug>1)
+ printk("cx24123: %s: writeln addr=0x08, reg 0x%02x, value 0x%02x\n",
+ __FUNCTION__,reg, data);
+
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk("%s: writelnbreg error (err == %i, reg == 0x%02x,"
" data == 0x%02x)\n", __FUNCTION__, err, reg, data);
@@ -303,6 +289,9 @@
return ret;
}
+ if (debug>1)
+ printk("cx24123: read reg 0x%02x, value 0x%02x\n",reg, ret);
+
return b1[0];
}
@@ -313,17 +302,23 @@
static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_inversion_t inversion)
{
+ u8 nom_reg = cx24123_readreg(state, 0x0e);
+ u8 auto_reg = cx24123_readreg(state, 0x10);
+
switch (inversion) {
case INVERSION_OFF:
- cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) & 0x7f);
- cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+ dprintk("%s: inversion off\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg & ~0x80);
+ cx24123_writereg(state, 0x10, auto_reg | 0x80);
break;
case INVERSION_ON:
- cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) | 0x80);
- cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+ dprintk("%s: inversion on\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x80);
+ cx24123_writereg(state, 0x10, auto_reg | 0x80);
break;
case INVERSION_AUTO:
- cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) & 0x7f);
+ dprintk("%s: inversion auto\n",__FUNCTION__);
+ cx24123_writereg(state, 0x10, auto_reg & ~0x80);
break;
default:
return -EINVAL;
@@ -338,92 +333,191 @@
val = cx24123_readreg(state, 0x1b) >> 7;
- if (val == 0)
+ if (val == 0) {
+ dprintk("%s: read inversion off\n",__FUNCTION__);
*inversion = INVERSION_OFF;
- else
+ } else {
+ dprintk("%s: read inversion on\n",__FUNCTION__);
*inversion = INVERSION_ON;
+ }
return 0;
}
static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec)
{
+ u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07;
+
if ( (fec < FEC_NONE) || (fec > FEC_AUTO) )
fec = FEC_AUTO;
- /* Hardware has 5/11 and 3/5 but are never unused */
switch (fec) {
- case FEC_NONE:
- return cx24123_writereg(state, 0x0f, 0x01);
case FEC_1_2:
- return cx24123_writereg(state, 0x0f, 0x02);
+ dprintk("%s: set FEC to 1/2\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x01);
+ cx24123_writereg(state, 0x0f, 0x02);
+ break;
case FEC_2_3:
- return cx24123_writereg(state, 0x0f, 0x04);
+ dprintk("%s: set FEC to 2/3\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x02);
+ cx24123_writereg(state, 0x0f, 0x04);
+ break;
case FEC_3_4:
- return cx24123_writereg(state, 0x0f, 0x08);
+ dprintk("%s: set FEC to 3/4\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x03);
+ cx24123_writereg(state, 0x0f, 0x08);
+ break;
+ case FEC_4_5:
+ dprintk("%s: set FEC to 4/5\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x04);
+ cx24123_writereg(state, 0x0f, 0x10);
+ break;
case FEC_5_6:
- return cx24123_writereg(state, 0x0f, 0x20);
+ dprintk("%s: set FEC to 5/6\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x05);
+ cx24123_writereg(state, 0x0f, 0x20);
+ break;
+ case FEC_6_7:
+ dprintk("%s: set FEC to 6/7\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x06);
+ cx24123_writereg(state, 0x0f, 0x40);
+ break;
case FEC_7_8:
- return cx24123_writereg(state, 0x0f, 0x80);
+ dprintk("%s: set FEC to 7/8\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x07);
+ cx24123_writereg(state, 0x0f, 0x80);
+ break;
case FEC_AUTO:
- return cx24123_writereg(state, 0x0f, 0xae);
+ dprintk("%s: set FEC to auto\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0f, 0xfe);
+ break;
default:
return -EOPNOTSUPP;
}
-}
-
-static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec)
-{
- int ret;
- u8 val;
-
- ret = cx24123_readreg (state, 0x1b);
- if (ret < 0)
- return ret;
- val = ret & 0x07;
- switch (val) {
- case 1:
- *fec = FEC_1_2;
- break;
- case 3:
- *fec = FEC_2_3;
- break;
- case 4:
- *fec = FEC_3_4;
- break;
- case 5:
- *fec = FEC_4_5;
- break;
- case 6:
- *fec = FEC_5_6;
- break;
- case 7:
- *fec = FEC_7_8;
- break;
- case 2: /* *fec = FEC_3_5; break; */
- case 0: /* *fec = FEC_5_11; break; */
- *fec = FEC_AUTO;
- break;
- default:
- *fec = FEC_NONE; // can't happen
- }
return 0;
}
-/* fixme: Symbol rates < 3MSps may not work because of precision loss */
+static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec)
+{
+ int ret;
+
+ ret = cx24123_readreg (state, 0x1b);
+ if (ret < 0)
+ return ret;
+ ret = ret & 0x07;
+
+ switch (ret) {
+ case 1:
+ *fec = FEC_1_2;
+ break;
+ case 2:
+ *fec = FEC_2_3;
+ break;
+ case 3:
+ *fec = FEC_3_4;
+ break;
+ case 4:
+ *fec = FEC_4_5;
+ break;
+ case 5:
+ *fec = FEC_5_6;
+ break;
+ case 6:
+ *fec = FEC_6_7;
+ break;
+ case 7:
+ *fec = FEC_7_8;
+ break;
+ default:
+ /* this can happen when there's no lock */
+ *fec = FEC_NONE;
+ }
+
+ return 0;
+}
+
+/* Approximation of closest integer of log2(a/b). It actually gives the
+ lowest integer i such that 2^i >= round(a/b) */
+static u32 cx24123_int_log2(u32 a, u32 b)
+{
+ u32 exp, nearest = 0;
+ u32 div = a / b;
+ if(a % b >= b / 2) ++div;
+ if(div < (1 << 31))
+ {
+ for(exp = 1; div > exp; nearest++)
+ exp += exp;
+ }
+ return nearest;
+}
+
static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate)
{
- u32 val;
+ u32 tmp, sample_rate, ratio, sample_gain;
+ u8 pll_mult;
- val = (srate / 1185) * 100;
+ /* check if symbol rate is within limits */
+ if ((srate > state->ops.info.symbol_rate_max) ||
+ (srate < state->ops.info.symbol_rate_min))
+ return -EOPNOTSUPP;;
- /* Compensate for scaling up, by removing 17 symbols per 1Msps */
- val = val - (17 * (srate / 1000000));
+ /* choose the sampling rate high enough for the required operation,
+ while optimizing the power consumed by the demodulator */
+ if (srate < (XTAL*2)/2)
+ pll_mult = 2;
+ else if (srate < (XTAL*3)/2)
+ pll_mult = 3;
+ else if (srate < (XTAL*4)/2)
+ pll_mult = 4;
+ else if (srate < (XTAL*5)/2)
+ pll_mult = 5;
+ else if (srate < (XTAL*6)/2)
+ pll_mult = 6;
+ else if (srate < (XTAL*7)/2)
+ pll_mult = 7;
+ else if (srate < (XTAL*8)/2)
+ pll_mult = 8;
+ else
+ pll_mult = 9;
- cx24123_writereg(state, 0x08, (val >> 16) & 0xff );
- cx24123_writereg(state, 0x09, (val >> 8) & 0xff );
- cx24123_writereg(state, 0x0a, (val ) & 0xff );
+
+ sample_rate = pll_mult * XTAL;
+
+ /*
+ SYSSymbolRate[21:0] = (srate << 23) / sample_rate
+
+ We have to use 32 bit unsigned arithmetic without precision loss.
+ The maximum srate is 45000000 or 0x02AEA540. This number has
+ only 6 clear bits on top, hence we can shift it left only 6 bits
+ at a time. Borrowed from cx24110.c
+ */
+
+ tmp = srate << 6;
+ ratio = tmp / sample_rate;
+
+ tmp = (tmp % sample_rate) << 6;
+ ratio = (ratio << 6) + (tmp / sample_rate);
+
+ tmp = (tmp % sample_rate) << 6;
+ ratio = (ratio << 6) + (tmp / sample_rate);
+
+ tmp = (tmp % sample_rate) << 5;
+ ratio = (ratio << 5) + (tmp / sample_rate);
+
+
+ cx24123_writereg(state, 0x01, pll_mult * 6);
+
+ cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f );
+ cx24123_writereg(state, 0x09, (ratio >> 8) & 0xff );
+ cx24123_writereg(state, 0x0a, (ratio ) & 0xff );
+
+ /* also set the demodulator sample gain */
+ sample_gain = cx24123_int_log2(sample_rate, srate);
+ tmp = cx24123_readreg(state, 0x0c) & ~0xe0;
+ cx24123_writereg(state, 0x0c, tmp | sample_gain << 5);
+
+ dprintk("%s: srate=%d, ratio=0x%08x, sample_rate=%i sample_gain=%d\n", __FUNCTION__, srate, ratio, sample_rate, sample_gain);
return 0;
}
@@ -437,6 +531,9 @@
struct cx24123_state *state = fe->demodulator_priv;
u32 ndiv = 0, adiv = 0, vco_div = 0;
int i = 0;
+ int pump = 2;
+ int band = 0;
+ int num_bands = sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]);
/* Defaults for low freq, low rate */
state->VCAarg = cx24123_AGC_vals[0].VCAprogdata;
@@ -444,38 +541,49 @@
state->bandselectarg = cx24123_bandselect_vals[0].progdata;
vco_div = cx24123_bandselect_vals[0].VCOdivider;
- /* For the given symbolerate, determine the VCA and VGA programming bits */
+ /* For the given symbol rate, determine the VCA, VGA and FILTUNE programming bits */
for (i = 0; i < sizeof(cx24123_AGC_vals) / sizeof(cx24123_AGC_vals[0]); i++)
{
if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) &&
- (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
+ (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
state->VCAarg = cx24123_AGC_vals[i].VCAprogdata;
state->VGAarg = cx24123_AGC_vals[i].VGAprogdata;
+ state->FILTune = cx24123_AGC_vals[i].FILTune;
}
}
- /* For the given frequency, determine the bandselect programming bits */
- for (i = 0; i < sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]); i++)
+ /* determine the band to use */
+ if(force_band < 1 || force_band > num_bands)
{
- if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
- (cx24123_bandselect_vals[i].freq_high >= p->frequency) ) {
- state->bandselectarg = cx24123_bandselect_vals[i].progdata;
- vco_div = cx24123_bandselect_vals[i].VCOdivider;
+ for (i = 0; i < num_bands; i++)
+ {
+ if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
+ (cx24123_bandselect_vals[i].freq_high >= p->frequency) )
+ band = i;
}
}
+ else
+ band = force_band - 1;
+
+ state->bandselectarg = cx24123_bandselect_vals[band].progdata;
+ vco_div = cx24123_bandselect_vals[band].VCOdivider;
+
+ /* determine the charge pump current */
+ if ( p->frequency < (cx24123_bandselect_vals[band].freq_low + cx24123_bandselect_vals[band].freq_high)/2 )
+ pump = 0x01;
+ else
+ pump = 0x02;
/* Determine the N/A dividers for the requested lband freq (in kHz). */
- /* Note: 10111 (kHz) is the Crystal Freq and divider of 10. */
- ndiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) / 32) & 0x1ff;
- adiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) % 32) & 0x1f;
+ /* Note: the reference divider R=10, frequency is in KHz, XTAL is in Hz */
+ ndiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) / 32) & 0x1ff;
+ adiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) % 32) & 0x1f;
if (adiv == 0)
- adiv++;
+ ndiv++;
- /* determine the correct pll frequency values. */
- /* Command 11, refdiv 11, cpump polarity 1, cpump current 3mA 10. */
- state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (2 << 14);
- state->pllarg |= (ndiv << 5) | adiv;
+ /* control bits 11, refdiv 11, charge pump polarity 1, charge pump current, ndiv, adiv */
+ state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (pump << 14) | (ndiv << 5) | adiv;
return 0;
}
@@ -489,6 +597,8 @@
struct cx24123_state *state = fe->demodulator_priv;
unsigned long timeout;
+ dprintk("%s: pll writereg called, data=0x%08x\n",__FUNCTION__,data);
+
/* align the 21 bytes into to bit23 boundary */
data = data << 3;
@@ -538,6 +648,9 @@
static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
struct cx24123_state *state = fe->demodulator_priv;
+ u8 val;
+
+ dprintk("frequency=%i\n", p->frequency);
if (cx24123_pll_calculate(fe, p) != 0) {
printk("%s: cx24123_pll_calcutate failed\n",__FUNCTION__);
@@ -552,6 +665,14 @@
cx24123_pll_writereg(fe, p, state->bandselectarg);
cx24123_pll_writereg(fe, p, state->pllarg);
+ /* set the FILTUNE voltage */
+ val = cx24123_readreg(state, 0x28) & ~0x3;
+ cx24123_writereg(state, 0x27, state->FILTune >> 2);
+ cx24123_writereg(state, 0x28, val | (state->FILTune & 0x3));
+
+ dprintk("%s: pll tune VCA=%d, band=%d, pll=%d\n",__FUNCTION__,state->VCAarg,
+ state->bandselectarg,state->pllarg);
+
return 0;
}
@@ -560,6 +681,8 @@
struct cx24123_state *state = fe->demodulator_priv;
int i;
+ dprintk("%s: init frontend\n",__FUNCTION__);
+
/* Configure the demod to a good set of defaults */
for (i = 0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++)
cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data);
@@ -587,10 +710,13 @@
switch (voltage) {
case SEC_VOLTAGE_13:
+ dprintk("%s: isl6421 voltage = 13V\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val & 0x32); /* V 13v */
case SEC_VOLTAGE_18:
+ dprintk("%s: isl6421 voltage = 18V\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val | 0x04); /* H 18v */
case SEC_VOLTAGE_OFF:
+ dprintk("%s: isl5421 voltage off\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val & 0x30);
default:
return -EINVAL;
@@ -624,13 +750,93 @@
return 0;
}
-static int cx24123_send_diseqc_msg(struct dvb_frontend* fe,
- struct dvb_diseqc_master_cmd *cmd)
+/* wait for diseqc queue to become ready (or timeout) */
+static void cx24123_wait_for_diseqc(struct cx24123_state *state)
{
- /* fixme: Implement diseqc */
- printk("%s: No support yet\n",__FUNCTION__);
+ unsigned long timeout = jiffies + msecs_to_jiffies(200);
+ while (!(cx24123_readreg(state, 0x29) & 0x40)) {
+ if(time_after(jiffies, timeout)) {
+ printk("%s: diseqc queue not ready, command may be lost.\n", __FUNCTION__);
+ break;
+ }
+ msleep(10);
+ }
+}
- return -ENOTSUPP;
+static int cx24123_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+ int i, val;
+
+ dprintk("%s:\n",__FUNCTION__);
+
+ /* check if continuous tone has been stopped */
+ if (state->config->use_isl6421)
+ val = cx24123_readlnbreg(state, 0x00) & 0x10;
+ else
+ val = cx24123_readreg(state, 0x29) & 0x10;
+
+
+ if (val) {
+ printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
+ return -ENOTSUPP;
+ }
+
+ /* wait for diseqc queue ready */
+ cx24123_wait_for_diseqc(state);
+
+ /* select tone mode */
+ cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xf8);
+
+ for (i = 0; i < cmd->msg_len; i++)
+ cx24123_writereg(state, 0x2C + i, cmd->msg[i]);
+
+ val = cx24123_readreg(state, 0x29);
+ cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) | ((cmd->msg_len-3) & 3));
+
+ /* wait for diseqc message to finish sending */
+ cx24123_wait_for_diseqc(state);
+
+ return 0;
+}
+
+static int cx24123_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+ int val;
+
+ dprintk("%s:\n", __FUNCTION__);
+
+ /* check if continuous tone has been stoped */
+ if (state->config->use_isl6421)
+ val = cx24123_readlnbreg(state, 0x00) & 0x10;
+ else
+ val = cx24123_readreg(state, 0x29) & 0x10;
+
+
+ if (val) {
+ printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
+ return -ENOTSUPP;
+ }
+
+ cx24123_wait_for_diseqc(state);
+
+ /* select tone mode */
+ val = cx24123_readreg(state, 0x2a) & 0xf8;
+ cx24123_writereg(state, 0x2a, val | 0x04);
+
+ val = cx24123_readreg(state, 0x29);
+
+ if (burst == SEC_MINI_A)
+ cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x00));
+ else if (burst == SEC_MINI_B)
+ cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x08));
+ else
+ return -EINVAL;
+
+ cx24123_wait_for_diseqc(state);
+
+ return 0;
}
static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status)
@@ -642,13 +848,15 @@
*status = 0;
if (lock & 0x01)
- *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
+ *status |= FE_HAS_SIGNAL;
+ if (sync & 0x02)
+ *status |= FE_HAS_CARRIER;
if (sync & 0x04)
*status |= FE_HAS_VITERBI;
if (sync & 0x08)
- *status |= FE_HAS_CARRIER;
+ *status |= FE_HAS_SYNC;
if (sync & 0x80)
- *status |= FE_HAS_SYNC | FE_HAS_LOCK;
+ *status |= FE_HAS_LOCK;
return 0;
}
@@ -681,6 +889,8 @@
else
state->snr = 0;
+ dprintk("%s: BER = %d, S/N index = %d\n",__FUNCTION__,state->lastber, state->snr);
+
*ber = state->lastber;
return 0;
@@ -691,6 +901,8 @@
struct cx24123_state *state = fe->demodulator_priv;
*signal_strength = cx24123_readreg(state, 0x3b) << 8; /* larger = better */
+ dprintk("%s: Signal strength = %d\n",__FUNCTION__,*signal_strength);
+
return 0;
}
@@ -699,6 +911,8 @@
struct cx24123_state *state = fe->demodulator_priv;
*snr = state->snr;
+ dprintk("%s: read S/N index = %d\n",__FUNCTION__,*snr);
+
return 0;
}
@@ -707,6 +921,8 @@
struct cx24123_state *state = fe->demodulator_priv;
*ucblocks = state->lastber;
+ dprintk("%s: ucblocks (ber) = %d\n",__FUNCTION__,*ucblocks);
+
return 0;
}
@@ -714,6 +930,8 @@
{
struct cx24123_state *state = fe->demodulator_priv;
+ dprintk("%s: set_frontend\n",__FUNCTION__);
+
if (state->config->set_ts_params)
state->config->set_ts_params(fe, 0);
@@ -737,6 +955,8 @@
{
struct cx24123_state *state = fe->demodulator_priv;
+ dprintk("%s: get_frontend\n",__FUNCTION__);
+
if (cx24123_get_inversion(state, &p->inversion) != 0) {
printk("%s: Failed to get inversion status\n",__FUNCTION__);
return -EREMOTEIO;
@@ -763,8 +983,10 @@
switch (tone) {
case SEC_TONE_ON:
+ dprintk("%s: isl6421 sec tone on\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val | 0x10);
case SEC_TONE_OFF:
+ dprintk("%s: isl6421 sec tone off\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val & 0x2f);
default:
printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone);
@@ -855,12 +1077,13 @@
.frequency_min = 950000,
.frequency_max = 2150000,
.frequency_stepsize = 1011, /* kHz for QPSK frontends */
- .frequency_tolerance = 29500,
+ .frequency_tolerance = 5000,
.symbol_rate_min = 1000000,
.symbol_rate_max = 45000000,
.caps = FE_CAN_INVERSION_AUTO |
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
- FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
FE_CAN_QPSK | FE_CAN_RECOVER
},
@@ -875,12 +1098,16 @@
.read_snr = cx24123_read_snr,
.read_ucblocks = cx24123_read_ucblocks,
.diseqc_send_master_cmd = cx24123_send_diseqc_msg,
+ .diseqc_send_burst = cx24123_diseqc_send_burst,
.set_tone = cx24123_set_tone,
.set_voltage = cx24123_set_voltage,
};
module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+module_param(force_band, int, 0644);
+MODULE_PARM_DESC(force_band, "Force a specific band select (1-9, default:off).");
MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24123/cx24109 hardware");
MODULE_AUTHOR("Steven Toth");
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index b6e2c38..791706e 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -235,8 +235,8 @@
.max = 863000000,
.count = 3,
.entries = {
- { 160000000, 44000000, 62500, 0xce, 0x01 },
- { 455000000, 44000000, 62500, 0xce, 0x02 },
+ { 165000000, 44000000, 62500, 0xce, 0x01 },
+ { 450000000, 44000000, 62500, 0xce, 0x02 },
{ 999999999, 44000000, 62500, 0xce, 0x04 },
},
};
diff --git a/drivers/media/dvb/pluto2/Kconfig b/drivers/media/dvb/pluto2/Kconfig
index 84f8f9f..48252e9 100644
--- a/drivers/media/dvb/pluto2/Kconfig
+++ b/drivers/media/dvb/pluto2/Kconfig
@@ -1,6 +1,6 @@
config DVB_PLUTO2
tristate "Pluto2 cards"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C
select I2C
select I2C_ALGOBIT
select DVB_TDA1004X
diff --git a/drivers/media/dvb/pluto2/Makefile b/drivers/media/dvb/pluto2/Makefile
index 86ca84b..ce6a9aa 100644
--- a/drivers/media/dvb/pluto2/Makefile
+++ b/drivers/media/dvb/pluto2/Makefile
@@ -1,3 +1,3 @@
-obj-$(CONFIG_DVB_PLUTO2) = pluto2.o
+obj-$(CONFIG_DVB_PLUTO2) += pluto2.o
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 5b2aadb..b5ac7df 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -1,8 +1,7 @@
config DVB_AV7110
tristate "AV7110 cards"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
select FW_LOADER
- select VIDEO_DEV
select VIDEO_SAA7146_VV
select DVB_VES1820
select DVB_VES1X93
@@ -59,7 +58,7 @@
config DVB_BUDGET
tristate "Budget cards"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
select VIDEO_SAA7146
select DVB_STV0299
select DVB_VES1X93
@@ -80,7 +79,7 @@
config DVB_BUDGET_CI
tristate "Budget cards with onboard CI connector"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
select VIDEO_SAA7146
select DVB_STV0297
select DVB_STV0299
@@ -100,8 +99,7 @@
config DVB_BUDGET_AV
tristate "Budget cards with analog video inputs"
- depends on DVB_CORE && PCI
- select VIDEO_DEV
+ depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
select VIDEO_SAA7146_VV
select DVB_STV0299
select DVB_TDA1004X
@@ -119,7 +117,7 @@
config DVB_BUDGET_PATCH
tristate "AV7110 cards with Budget Patch"
- depends on DVB_CORE && DVB_BUDGET
+ depends on DVB_CORE && DVB_BUDGET && VIDEO_V4L1
select DVB_AV7110
select DVB_STV0299
select DVB_VES1X93
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 8efe3ce..8a7cd7d 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -1190,8 +1190,6 @@
SAA7146_HPS_SYNC_PORT_A);
saa7113_setinput(budget_av, 0);
- } else {
- ciintf_init(budget_av);
}
/* fixme: find some sane values here... */
@@ -1211,6 +1209,10 @@
budget_av->budget.dvb_adapter.priv = budget_av;
frontend_init(budget_av);
+ if (!budget_av->has_saa7113) {
+ ciintf_init(budget_av);
+ }
+
return 0;
}
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 5f91036..e64a609 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -71,6 +71,7 @@
struct tasklet_struct msp430_irq_tasklet;
struct tasklet_struct ciintf_irq_tasklet;
int slot_status;
+ int ci_irq;
struct dvb_ca_en50221 ca;
char ir_dev_name[50];
u8 tuner_pll_address; /* used for philips_tdm1316l configs */
@@ -276,8 +277,10 @@
if (slot != 0)
return -EINVAL;
- // trigger on RISING edge during reset so we know when READY is re-asserted
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ if (budget_ci->ci_irq) {
+ // trigger on RISING edge during reset so we know when READY is re-asserted
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ }
budget_ci->slot_status = SLOTSTATUS_RESET;
ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
msleep(1);
@@ -370,11 +373,50 @@
}
}
+static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+ unsigned int flags;
+
+ // ensure we don't get spurious IRQs during initialisation
+ if (!budget_ci->budget.ci_present)
+ return -EINVAL;
+
+ // read the CAM status
+ flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+ if (flags & CICONTROL_CAMDETECT) {
+ // mark it as present if it wasn't before
+ if (budget_ci->slot_status & SLOTSTATUS_NONE) {
+ budget_ci->slot_status = SLOTSTATUS_PRESENT;
+ }
+
+ // during a RESET, we check if we can read from IO memory to see when CAM is ready
+ if (budget_ci->slot_status & SLOTSTATUS_RESET) {
+ if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) {
+ budget_ci->slot_status = SLOTSTATUS_READY;
+ }
+ }
+ } else {
+ budget_ci->slot_status = SLOTSTATUS_NONE;
+ }
+
+ if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+ if (budget_ci->slot_status & SLOTSTATUS_READY) {
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ }
+ return DVB_CA_EN50221_POLL_CAM_PRESENT;
+ }
+
+ return 0;
+}
+
static int ciintf_init(struct budget_ci *budget_ci)
{
struct saa7146_dev *saa = budget_ci->budget.dev;
int flags;
int result;
+ int ci_version;
+ int ca_flags;
memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
@@ -382,16 +424,29 @@
saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
// test if it is there
- if ((ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0) & 0xa0) != 0xa0) {
+ ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
+ if ((ci_version & 0xa0) != 0xa0) {
result = -ENODEV;
goto error;
}
+
// determine whether a CAM is present or not
flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
budget_ci->slot_status = SLOTSTATUS_NONE;
if (flags & CICONTROL_CAMDETECT)
budget_ci->slot_status = SLOTSTATUS_PRESENT;
+ // version 0xa2 of the CI firmware doesn't generate interrupts
+ if (ci_version == 0xa2) {
+ ca_flags = 0;
+ budget_ci->ci_irq = 0;
+ } else {
+ ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
+ DVB_CA_EN50221_FLAG_IRQ_FR |
+ DVB_CA_EN50221_FLAG_IRQ_DA;
+ budget_ci->ci_irq = 1;
+ }
+
// register CI interface
budget_ci->ca.owner = THIS_MODULE;
budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem;
@@ -401,23 +456,27 @@
budget_ci->ca.slot_reset = ciintf_slot_reset;
budget_ci->ca.slot_shutdown = ciintf_slot_shutdown;
budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable;
+ budget_ci->ca.poll_slot_status = ciintf_poll_slot_status;
budget_ci->ca.data = budget_ci;
if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
&budget_ci->ca,
- DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
- DVB_CA_EN50221_FLAG_IRQ_FR |
- DVB_CA_EN50221_FLAG_IRQ_DA, 1)) != 0) {
+ ca_flags, 1)) != 0) {
printk("budget_ci: CI interface detected, but initialisation failed.\n");
goto error;
}
+
// Setup CI slot IRQ
- tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
- if (budget_ci->slot_status != SLOTSTATUS_NONE) {
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
- } else {
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ if (budget_ci->ci_irq) {
+ tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
+ if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
+ } else {
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ }
+ saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
}
- saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
+
+ // enable interface
ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
CICONTROL_RESET, 1, 0);
@@ -426,10 +485,12 @@
budget_ci->budget.ci_present = 1;
// forge a fake CI IRQ so the CAM state is setup correctly
- flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
- if (budget_ci->slot_status != SLOTSTATUS_NONE)
- flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
- dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+ if (budget_ci->ci_irq) {
+ flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
+ if (budget_ci->slot_status != SLOTSTATUS_NONE)
+ flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
+ dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+ }
return 0;
@@ -443,9 +504,13 @@
struct saa7146_dev *saa = budget_ci->budget.dev;
// disable CI interrupts
- saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
- saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
- tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+ if (budget_ci->ci_irq) {
+ saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
+ tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+ }
+
+ // reset interface
ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
msleep(1);
ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
@@ -473,7 +538,7 @@
if (*isr & MASK_10)
ttpci_budget_irq10_handler(dev, isr);
- if ((*isr & MASK_03) && (budget_ci->budget.ci_present))
+ if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq))
tasklet_schedule(&budget_ci->ciintf_irq_tasklet);
}
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 248fdc7..6ceae38 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -1507,7 +1507,11 @@
mutex_unlock(&ttusb->semi2c);
- dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE);
+ if ((result = dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE)) < 0) {
+ ttusb_free_iso_urbs(ttusb);
+ kfree(ttusb);
+ return result;
+ }
ttusb->adapter.priv = ttusb;
/* i2c */
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index d318be3..3fff757 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -7,7 +7,7 @@
config RADIO_CADET
tristate "ADS Cadet AM/FM Tuner"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these AM/FM radio cards, and then
fill in the port address below.
@@ -25,7 +25,7 @@
config RADIO_RTRACK
tristate "AIMSlab RadioTrack (aka RadioReveal) support"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
@@ -59,7 +59,7 @@
config RADIO_RTRACK2
tristate "AIMSlab RadioTrack II support"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below.
@@ -82,7 +82,7 @@
config RADIO_AZTECH
tristate "Aztech/Packard Bell Radio"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
@@ -106,7 +106,7 @@
config RADIO_GEMTEK
tristate "GemTek Radio Card support"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below.
@@ -131,7 +131,7 @@
config RADIO_GEMTEK_PCI
tristate "GemTek PCI Radio Card support"
- depends on VIDEO_DEV && PCI
+ depends on VIDEO_V4L1 && PCI
---help---
Choose Y here if you have this PCI FM radio card.
@@ -145,7 +145,7 @@
config RADIO_MAXIRADIO
tristate "Guillemot MAXI Radio FM 2000 radio"
- depends on VIDEO_DEV && PCI
+ depends on VIDEO_V4L1 && PCI
---help---
Choose Y here if you have this radio card. This card may also be
found as Gemtek PCI FM.
@@ -160,7 +160,7 @@
config RADIO_MAESTRO
tristate "Maestro on board radio"
- depends on VIDEO_DEV
+ depends on VIDEO_V4L1
---help---
Say Y here to directly support the on-board radio tuner on the
Maestro 2 or 2E sound card.
@@ -175,7 +175,7 @@
config RADIO_MIROPCM20
tristate "miroSOUND PCM20 radio"
- depends on ISA && VIDEO_DEV && SOUND_ACI_MIXER
+ depends on ISA && VIDEO_V4L1 && SOUND_ACI_MIXER
---help---
Choose Y here if you have this FM radio card. You also need to say Y
to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
@@ -208,7 +208,7 @@
config RADIO_SF16FMI
tristate "SF16FMI Radio"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards. If you
compile the driver into the kernel and your card is not PnP one, you
@@ -225,7 +225,7 @@
config RADIO_SF16FMR2
tristate "SF16FMR2 Radio"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards.
@@ -239,7 +239,7 @@
config RADIO_TERRATEC
tristate "TerraTec ActiveRadio ISA Standalone"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below. (TODO)
@@ -268,7 +268,7 @@
config RADIO_TRUST
tristate "Trust FM radio card"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
help
This is a driver for the Trust FM radio cards. Say Y if you have
such a card and want to use it under Linux.
@@ -286,7 +286,7 @@
config RADIO_TYPHOON
tristate "Typhoon Radio (a.k.a. EcoRadio)"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address and the frequency used for muting below.
@@ -330,7 +330,7 @@
config RADIO_ZOLTRIX
tristate "Zoltrix Radio"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 85888a8..6b41970 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -2,10 +2,10 @@
# Multimedia Video device configuration
#
-menu "Video For Linux"
+menu "Video Capture Adapters"
depends on VIDEO_DEV
-comment "Video Adapters"
+comment "Video Capture Adapters"
config VIDEO_ADV_DEBUG
bool "Enable advanced debug functionality"
@@ -16,11 +16,23 @@
V4L devices.
In doubt, say N.
+config VIDEO_VIVI
+ tristate "Virtual Video Driver"
+ depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
+ select VIDEO_BUF
+ default n
+ ---help---
+ Enables a virtual video driver. This device shows a color bar
+ and a timestamp, as a real device would generate by using V4L2
+ api.
+ Say Y here if you want to test video apps or debug V4L devices.
+ In doubt, say N.
+
source "drivers/media/video/bt8xx/Kconfig"
config VIDEO_SAA6588
tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
- depends on VIDEO_DEV && I2C && VIDEO_BT848
+ depends on I2C && VIDEO_BT848
help
Support for Radio Data System (RDS) decoder. This allows seeing
@@ -32,7 +44,7 @@
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
- depends on VIDEO_DEV && ISA
+ depends on ISA && VIDEO_V4L1
help
Say Y if you have such a thing.
@@ -41,7 +53,7 @@
config VIDEO_PLANB
tristate "PlanB Video-In on PowerMac"
- depends on PPC_PMAC && VIDEO_DEV && BROKEN
+ depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
help
PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
input hardware. If you want to experiment with this, say Y.
@@ -52,7 +64,7 @@
config VIDEO_BWQCAM
tristate "Quickcam BW Video For Linux"
- depends on VIDEO_DEV && PARPORT
+ depends on PARPORT && VIDEO_V4L1
help
Say Y have if you the black and white version of the QuickCam
camera. See the next option for the color version.
@@ -62,7 +74,7 @@
config VIDEO_CQCAM
tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
- depends on EXPERIMENTAL && VIDEO_DEV && PARPORT
+ depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
help
This is the video4linux driver for the colour version of the
Connectix QuickCam. If you have one of these cameras, say Y here,
@@ -73,7 +85,7 @@
config VIDEO_W9966
tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
- depends on PARPORT_1284 && VIDEO_DEV && PARPORT
+ depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
help
Video4linux driver for Winbond's w9966 based Webcams.
Currently tested with the LifeView FlyCam Supra.
@@ -86,7 +98,7 @@
config VIDEO_CPIA
tristate "CPiA Video For Linux"
- depends on VIDEO_DEV
+ depends on VIDEO_V4L1
---help---
This is the video4linux driver for cameras based on Vision's CPiA
(Colour Processor Interface ASIC), such as the Creative Labs Video
@@ -123,7 +135,7 @@
config VIDEO_SAA5246A
tristate "SAA5246A, SAA5281 Teletext processor"
- depends on VIDEO_DEV && I2C
+ depends on I2C && VIDEO_V4L1
help
Support for I2C bus based teletext using the SAA5246A or SAA5281
chip. Useful only if you live in Europe.
@@ -150,7 +162,7 @@
config VIDEO_VINO
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
- depends on VIDEO_DEV && I2C && SGI_IP22 && EXPERIMENTAL
+ depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L1
select I2C_ALGO_SGI
help
Say Y here to build in support for the Vino video input system found
@@ -158,7 +170,7 @@
config VIDEO_STRADIS
tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
- depends on EXPERIMENTAL && VIDEO_DEV && PCI
+ depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && !PPC64
help
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
driver for PCI. There is a product page at
@@ -166,7 +178,7 @@
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C_ALGOBIT
+ depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && !PPC64
help
Say Y for support for MJPEG capture cards based on the Zoran
36057/36067 PCI controller chipset. This includes the Iomega
@@ -214,7 +226,7 @@
config VIDEO_ZR36120
tristate "Zoran ZR36120/36125 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C && BROKEN
+ depends on PCI && I2C && VIDEO_V4L1 && BROKEN
help
Support for ZR36120/ZR36125 based frame grabber/overlay boards.
This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
@@ -226,7 +238,7 @@
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
- depends on VIDEO_DEV && PCI && SONYPI
+ depends on PCI && SONYPI && VIDEO_V4L1
---help---
This is the video4linux driver for the Motion Eye camera found
in the Vaio Picturebook laptops. Please read the material in
@@ -242,7 +254,7 @@
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1
select VIDEO_SAA7146_VV
select VIDEO_TUNER
---help---
@@ -254,8 +266,9 @@
config VIDEO_DPC
tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1
select VIDEO_SAA7146_VV
+ select VIDEO_V4L2
---help---
This is a video4linux driver for the 'dpc7146 demonstration
board' by Philips-Semiconductors. It's the reference design
@@ -268,8 +281,9 @@
config VIDEO_HEXIUM_ORION
tristate "Hexium HV-PCI6 and Orion frame grabber"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1
select VIDEO_SAA7146_VV
+ select VIDEO_V4L2
---help---
This is a video4linux driver for the Hexium HV-PCI6 and
Orion frame grabber cards by Hexium.
@@ -279,8 +293,9 @@
config VIDEO_HEXIUM_GEMINI
tristate "Hexium Gemini frame grabber"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1
select VIDEO_SAA7146_VV
+ select VIDEO_V4L2
---help---
This is a video4linux driver for the Hexium Gemini frame
grabber card by Hexium. Please note that the Gemini Dual
@@ -293,7 +308,7 @@
config VIDEO_OVCAMCHIP
tristate "OmniVision Camera Chip support"
- depends on VIDEO_DEV && I2C
+ depends on I2C && VIDEO_V4L1
---help---
Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
This driver is intended to be used with the ov511 and w9968cf USB
@@ -304,7 +319,7 @@
config VIDEO_M32R_AR
tristate "AR devices"
- depends on M32R
+ depends on M32R && VIDEO_V4L1
---help---
This is a video4linux driver for the Renesas AR (Artificial Retina)
camera module.
@@ -365,17 +380,17 @@
source "drivers/media/video/cx25840/Kconfig"
config VIDEO_SAA711X
- tristate "Philips SAA7113/4/5 video decoders"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ tristate "Philips SAA7113/4/5 video decoders (OBSOLETED)"
+ depends on VIDEO_V4L1 && I2C && EXPERIMENTAL
---help---
- Support for the Philips SAA7113/4/5 video decoders.
+ Old support for the Philips SAA7113/4 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7115.
config VIDEO_SAA7127
tristate "Philips SAA7127/9 digital video encoders"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the Philips SAA7127/9 digital video encoders.
@@ -384,7 +399,7 @@
config VIDEO_UPD64031A
tristate "NEC Electronics uPD64031A Ghost Reduction"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the NEC Electronics uPD64031A Ghost Reduction
video chip. It is most often found in NTSC TV cards made for
@@ -396,7 +411,7 @@
config VIDEO_UPD64083
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
separation video chip. It is used to improve the quality of
@@ -418,7 +433,7 @@
config USB_DSBR
tristate "D-Link USB FM radio support (EXPERIMENTAL)"
- depends on USB && VIDEO_DEV && EXPERIMENTAL
+ depends on USB && VIDEO_V4L1 && EXPERIMENTAL
---help---
Say Y here if you want to connect this type of radio to your
computer's USB port. Note that the audio is not digital, and
@@ -434,7 +449,7 @@
config USB_OV511
tristate "USB OV511 Camera support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
@@ -445,7 +460,7 @@
config USB_SE401
tristate "USB SE401 Camera support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/se401.txt>
@@ -458,7 +473,7 @@
config USB_STV680
tristate "USB STV680 (Pencam) Camera support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. This includes the Pencam line of cameras.
@@ -470,7 +485,7 @@
config USB_W9968CF
tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on USB && VIDEO_DEV && I2C
+ depends on USB && VIDEO_V4L1 && I2C
select VIDEO_OVCAMCHIP
---help---
Say Y here if you want support for cameras based on OV681 or
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index b3ea2d6..e5bf268 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -10,7 +10,11 @@
msp3400-objs := msp3400-driver.o msp3400-kthreads.o
-obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o compat_ioctl32.o
+obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o compat_ioctl32.o
+
+ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
+ obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
+endif
obj-$(CONFIG_VIDEO_BT848) += bt8xx/
obj-$(CONFIG_VIDEO_BT848) += tvaudio.o tda7432.o tda9875.o ir-kbd-i2c.o
@@ -84,4 +88,8 @@
obj-$(CONFIG_USB_KONICAWC) += usbvideo/
obj-$(CONFIG_USB_VICAM) += usbvideo/
+obj-$(CONFIG_VIDEO_VIVI) += vivi.o
+
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+extra-cflags-$(CONFIG_VIDEO_V4L1_COMPAT) += -DCONFIG_VIDEO_V4L1_COMPAT
+
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 085477c..153f6a4 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_BT848
tristate "BT848 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C
+ depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_BTCX
diff --git a/drivers/media/video/bt8xx/Makefile b/drivers/media/video/bt8xx/Makefile
index db641a3..a096a03 100644
--- a/drivers/media/video/bt8xx/Makefile
+++ b/drivers/media/video/bt8xx/Makefile
@@ -8,5 +8,5 @@
obj-$(CONFIG_VIDEO_BT848) += bttv.o
-EXTRA_CFLAGS += -I$(src)/..
+EXTRA_CFLAGS += -Idrivers/media/video
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index f209a74..2b64aa8 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -2991,13 +2991,13 @@
if (UNSET != audiomux[0]) {
gpiobits = 0;
- for (i = 0; i < 5; i++) {
+ for (i = 0; i < 4; i++) {
bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
gpiobits |= audiomux[i];
}
} else {
gpiobits = audioall;
- for (i = 0; i < 5; i++) {
+ for (i = 0; i < 4; i++) {
bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
}
}
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index 16323a5..afcfe71 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -233,7 +233,7 @@
const struct bttv_format *fmt, struct bttv_overlay *ov,
int skip_even, int skip_odd)
{
- int instructions,rc,line,maxy,start,end,skip,nskips;
+ int dwords,rc,line,maxy,start,end,skip,nskips;
struct btcx_skiplist *skips;
u32 *rp,ri,ra;
u32 addr;
@@ -242,12 +242,12 @@
if (NULL == (skips = kmalloc(sizeof(*skips) * ov->nclips,GFP_KERNEL)))
return -ENOMEM;
- /* estimate risc mem: worst case is (clip+1) * lines instructions
+ /* estimate risc mem: worst case is (1.5*clip+1) * lines instructions
+ sync + jump (all 2 dwords) */
- instructions = (ov->nclips + 1) *
- ((skip_even || skip_odd) ? ov->w.height>>1 : ov->w.height);
- instructions += 2;
- if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,instructions*8)) < 0) {
+ dwords = (3 * ov->nclips + 2) *
+ ((skip_even || skip_odd) ? (ov->w.height+1)>>1 : ov->w.height);
+ dwords += 4;
+ if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,dwords*4)) < 0) {
kfree(skips);
return rc;
}
@@ -276,8 +276,6 @@
if (line > maxy)
btcx_calc_skips(line, ov->w.width, &maxy,
skips, &nskips, ov->clips, ov->nclips);
- else
- nskips = 0;
/* write out risc code */
for (start = 0, skip = 0; start < ov->w.width; start = end) {
diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
index f59ced1..1958d40 100644
--- a/drivers/media/video/cx25840/cx25840-firmware.c
+++ b/drivers/media/video/cx25840/cx25840-firmware.c
@@ -39,29 +39,12 @@
#define FWDEV(x) &((x)->adapter->dev)
-static int fastfw = 1;
static char *firmware = FWFILE;
-module_param(fastfw, bool, 0444);
module_param(firmware, charp, 0444);
-MODULE_PARM_DESC(fastfw, "Load firmware fast [0=100MHz 1=333MHz (default)]");
MODULE_PARM_DESC(firmware, "Firmware image [default: " FWFILE "]");
-static void set_i2c_delay(struct i2c_client *client, int delay)
-{
- struct i2c_algo_bit_data *algod = client->adapter->algo_data;
-
- /* We aren't guaranteed to be using algo_bit,
- * so avoid the null pointer dereference
- * and disable the 'fast firmware load' */
- if (algod) {
- algod->udelay = delay;
- } else {
- fastfw = 0;
- }
-}
-
static void start_fw_load(struct i2c_client *client)
{
/* DL_ADDR_LB=0 DL_ADDR_HB=0 */
@@ -71,16 +54,10 @@
cx25840_write(client, 0x803, 0x0b);
/* AUTO_INC_DIS=1 */
cx25840_write(client, 0x000, 0x20);
-
- if (fastfw)
- set_i2c_delay(client, 3);
}
static void end_fw_load(struct i2c_client *client)
{
- if (fastfw)
- set_i2c_delay(client, 10);
-
/* AUTO_INC_DIS=0 */
cx25840_write(client, 0x000, 0x00);
/* DL_ENABLE=0 */
@@ -107,30 +84,8 @@
int sent;
if ((sent = i2c_master_send(client, data, size)) < size) {
-
- if (fastfw) {
- v4l_err(client, "333MHz i2c firmware load failed\n");
- fastfw = 0;
- set_i2c_delay(client, 10);
-
- if (sent > 2) {
- u16 dl_addr = cx25840_read(client, 0x801) << 8;
- dl_addr |= cx25840_read(client, 0x800);
- dl_addr -= sent - 2;
- cx25840_write(client, 0x801, dl_addr >> 8);
- cx25840_write(client, 0x800, dl_addr & 0xff);
- }
-
- if (i2c_master_send(client, data, size) < size) {
- v4l_err(client, "100MHz i2c firmware load failed\n");
- return -ENOSYS;
- }
-
- } else {
- v4l_err(client, "firmware load i2c failure\n");
- return -ENOSYS;
- }
-
+ v4l_err(client, "firmware load i2c failure\n");
+ return -ENOSYS;
}
return 0;
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index c7042cf..f80154b 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -564,7 +564,7 @@
},
[CX88_BOARD_PCHDTV_HD3000] = {
.name = "pcHDTV HD3000 HDTV",
- .tuner_type = TUNER_THOMSON_DTT7610,
+ .tuner_type = TUNER_THOMSON_DTT761X,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 2c3d9f1..e1092d5 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -146,9 +146,11 @@
fields++;
/* estimate risc mem: worst case is one write per page border +
- one write per scan line + syncs + jump (all 2 dwords) */
- instructions = (bpl * lines * fields) / PAGE_SIZE + lines * fields;
- instructions += 3 + 4;
+ one write per scan line + syncs + jump (all 2 dwords). Padding
+ can cause next bpl to start close to a page border. First DMA
+ region may be smaller than PAGE_SIZE */
+ instructions = fields * (1 + ((bpl + padding) * lines) / PAGE_SIZE + lines);
+ instructions += 2;
if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
return rc;
@@ -176,9 +178,11 @@
int rc;
/* estimate risc mem: worst case is one write per page border +
- one write per scan line + syncs + jump (all 2 dwords) */
- instructions = (bpl * lines) / PAGE_SIZE + lines;
- instructions += 3 + 4;
+ one write per scan line + syncs + jump (all 2 dwords). Here
+ there is no padding and no sync. First DMA region may be smaller
+ than PAGE_SIZE */
+ instructions = 1 + (bpl * lines) / PAGE_SIZE + lines;
+ instructions += 1;
if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
return rc;
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index f0ea9b5..3619a44 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -372,7 +372,7 @@
static struct or51132_config pchdtv_hd3000 = {
.demod_address = 0x15,
.pll_address = 0x61,
- .pll_desc = &dvb_pll_thomson_dtt7610,
+ .pll_desc = &dvb_pll_thomson_dtt761x,
.set_ts_params = or51132_set_ts_param,
};
#endif
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 72a417b..694d1d8 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -35,8 +35,10 @@
#include "cx88.h"
#include <media/v4l2-common.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* Include V4L1 specific functions. Should be removed soon */
#include <linux/videodev.h>
+#endif
MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 5a793ae..dfb15bf 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_EM28XX
tristate "Empia EM2800/2820/2840 USB video capture support"
- depends on VIDEO_DEV && USB && I2C
+ depends on VIDEO_V4L1 && USB && I2C
select VIDEO_BUF
select VIDEO_TUNER
select VIDEO_TVEEPROM
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index ddc92cb..cf7cdf9 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1576,8 +1576,8 @@
errCode = em28xx_config(dev);
if (errCode) {
em28xx_errdev("error configuring device\n");
- kfree(dev);
em28xx_devused&=~(1<<dev->devno);
+ kfree(dev);
return -ENOMEM;
}
@@ -1603,8 +1603,8 @@
dev->vdev = video_device_alloc();
if (NULL == dev->vdev) {
em28xx_errdev("cannot allocate video_device.\n");
- kfree(dev);
em28xx_devused&=~(1<<dev->devno);
+ kfree(dev);
return -ENOMEM;
}
@@ -1612,8 +1612,8 @@
if (NULL == dev->vbi_dev) {
em28xx_errdev("cannot allocate video_device.\n");
kfree(dev->vdev);
- kfree(dev);
em28xx_devused&=~(1<<dev->devno);
+ kfree(dev);
return -ENOMEM;
}
@@ -1650,8 +1650,8 @@
mutex_unlock(&dev->lock);
list_del(&dev->devlist);
video_device_release(dev->vdev);
- kfree(dev);
em28xx_devused&=~(1<<dev->devno);
+ kfree(dev);
return -ENODEV;
}
@@ -1662,8 +1662,8 @@
list_del(&dev->devlist);
video_device_release(dev->vbi_dev);
video_device_release(dev->vdev);
- kfree(dev);
em28xx_devused&=~(1<<dev->devno);
+ kfree(dev);
return -ENODEV;
} else {
printk("registered VBI\n");
diff --git a/drivers/media/video/et61x251/Kconfig b/drivers/media/video/et61x251/Kconfig
index 6c43a90..c6bff70 100644
--- a/drivers/media/video/et61x251/Kconfig
+++ b/drivers/media/video/et61x251/Kconfig
@@ -1,6 +1,6 @@
config USB_ET61X251
tristate "USB ET61X[12]51 PC Camera Controller support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on Etoms ET61X151
or ET61X251 PC Camera Controllers.
diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig
index 8637655..53cbc95 100644
--- a/drivers/media/video/pwc/Kconfig
+++ b/drivers/media/video/pwc/Kconfig
@@ -1,6 +1,6 @@
config USB_PWC
tristate "USB Philips Cameras"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y or M here if you want to use one of these Philips & OEM
webcams:
diff --git a/drivers/media/video/pwc/Makefile b/drivers/media/video/pwc/Makefile
index 8326684..33d6012 100644
--- a/drivers/media/video/pwc/Makefile
+++ b/drivers/media/video/pwc/Makefile
@@ -1,20 +1,3 @@
-ifneq ($(KERNELRELEASE),)
-
pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-timon.o pwc-kiara.o
obj-$(CONFIG_USB_PWC) += pwc.o
-
-else
-
-KDIR := /lib/modules/$(shell uname -r)/build
-PWD := $(shell pwd)
-
-default:
- $(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
-
-endif
-
-clean:
- rm -f *.[oas] .*.flags *.ko .*.cmd .*.d .*.tmp *.mod.c
- rm -rf .tmp_versions
-
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index 133f9e5..c271e2e 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -142,6 +142,7 @@
static const struct i2c_reg_value saa7129_init_config_extra[] = {
{ SAA7127_REG_OUTPUT_PORT_CONTROL, 0x38 },
{ SAA7127_REG_VTRIG, 0xfa },
+ { 0, 0 }
};
static const struct i2c_reg_value saa7127_init_config_common[] = {
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index e666a446..86eae35 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3504,6 +3504,7 @@
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
+ break;
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
/* this turns the remote control chip off to work around a bug in it */
saa_writeb(SAA7134_GPIO_GPMODE1, 0x80);
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 13de055..f0c2111 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -548,6 +548,8 @@
if (report & SAA7134_IRQ_REPORT_GPIO16) {
switch (dev->has_remote) {
case SAA7134_REMOTE_GPIO:
+ if (!dev->remote)
+ break;
if (dev->remote->mask_keydown & 0x10000) {
saa7134_input_irq(dev);
}
@@ -564,6 +566,8 @@
if (report & SAA7134_IRQ_REPORT_GPIO18) {
switch (dev->has_remote) {
case SAA7134_REMOTE_GPIO:
+ if (!dev->remote)
+ break;
if ((dev->remote->mask_keydown & 0x40000) ||
(dev->remote->mask_keyup & 0x40000)) {
saa7134_input_irq(dev);
@@ -676,7 +680,7 @@
SAA7134_IRQ2_INTE_PE |
SAA7134_IRQ2_INTE_AR;
- if (dev->has_remote == SAA7134_REMOTE_GPIO) {
+ if (dev->has_remote == SAA7134_REMOTE_GPIO && dev->remote) {
if (dev->remote->mask_keydown & 0x10000)
irq2_mask |= SAA7134_IRQ2_INTE_GPIO16;
else if (dev->remote->mask_keydown & 0x40000)
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index aeef80f..e4156ec 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -31,8 +31,10 @@
#include "saa7134.h"
#include <media/v4l2-common.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* Include V4L1 specific functions. Should be removed soon */
#include <linux/videodev.h>
+#endif
/* ------------------------------------------------------------------ */
diff --git a/drivers/media/video/sn9c102/Kconfig b/drivers/media/video/sn9c102/Kconfig
index 55f2bc1..cf552e6 100644
--- a/drivers/media/video/sn9c102/Kconfig
+++ b/drivers/media/video/sn9c102/Kconfig
@@ -1,6 +1,6 @@
config USB_SN9C102
tristate "USB SN9C10x PC Camera Controller support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on SONiX SN9C101,
SN9C102 or SN9C103 PC Camera Controllers.
diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c
index 72e0f01d..a1ae036 100644
--- a/drivers/media/video/tuner-types.c
+++ b/drivers/media/video/tuner-types.c
@@ -877,8 +877,8 @@
/* ------------ TUNER_LG_TDVS_H062F - INFINEON ATSC ------------ */
static struct tuner_range tuner_tua6034_ntsc_ranges[] = {
- { 16 * 160.00 /*MHz*/, 0x8e, 0x01 },
- { 16 * 455.00 /*MHz*/, 0x8e, 0x02 },
+ { 16 * 165.00 /*MHz*/, 0x8e, 0x01 },
+ { 16 * 450.00 /*MHz*/, 0x8e, 0x02 },
{ 16 * 999.99 , 0x8e, 0x04 },
};
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 431c3e2..b463e99 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -218,7 +218,7 @@
/* 110-119 */
{ TUNER_ABSENT, "Thompson DTT75105"},
{ TUNER_ABSENT, "Conexant_CX24109"},
- { TUNER_ABSENT, "TCL M2523_5N_E"},
+ { TUNER_TCL_2002N, "TCL M2523_5N_E"},
{ TUNER_ABSENT, "TCL M2523_3DB_E"},
{ TUNER_ABSENT, "Philips 8275A"},
{ TUNER_ABSENT, "Microtune MT2060"},
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index 08a5d20..39269a2 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -3,7 +3,7 @@
config USB_VICAM
tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
- depends on USB && VIDEO_DEV && EXPERIMENTAL
+ depends on USB && VIDEO_V4L1 && EXPERIMENTAL
select VIDEO_USBVIDEO
---help---
Say Y here if you have 3com homeconnect camera (vicam).
@@ -13,7 +13,7 @@
config USB_IBMCAM
tristate "USB IBM (Xirlink) C-it Camera support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
select VIDEO_USBVIDEO
---help---
Say Y here if you want to connect a IBM "C-It" camera, also known as
@@ -28,7 +28,7 @@
config USB_KONICAWC
tristate "USB Konica Webcam support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
select VIDEO_USBVIDEO
---help---
Say Y here if you want support for webcams based on a Konica
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 5e81340..779db26 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -26,6 +26,11 @@
#include <linux/random.h>
#include <linux/version.h>
#include <linux/videodev2.h>
+#include <linux/dma-mapping.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+/* Include V4L1 specific functions. Should be removed soon */
+#include <linux/videodev.h>
+#endif
#include <linux/interrupt.h>
#include <media/video-buf.h>
#include <media/v4l2-common.h>
diff --git a/drivers/media/video/zc0301/Kconfig b/drivers/media/video/zc0301/Kconfig
index c3bf886..115833e 100644
--- a/drivers/media/video/zc0301/Kconfig
+++ b/drivers/media/video/zc0301/Kconfig
@@ -1,6 +1,6 @@
config USB_ZC0301
tristate "USB ZC0301 Image Processor and Control Chip support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on the ZC0301
Image Processor and Control Chip.
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5ca99e2..54161ae 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -55,8 +55,8 @@
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.4.39"
-#define DRV_MODULE_RELDATE "March 22, 2006"
+#define DRV_MODULE_VERSION "1.4.40"
+#define DRV_MODULE_RELDATE "May 22, 2006"
#define RUN_AT(x) (jiffies + (x))
@@ -2945,7 +2945,7 @@
int buf_size)
{
u32 written, offset32, len32;
- u8 *buf, start[4], end[4];
+ u8 *buf, start[4], end[4], *flash_buffer = NULL;
int rc = 0;
int align_start, align_end;
@@ -2985,12 +2985,19 @@
memcpy(buf + align_start, data_buf, buf_size);
}
+ if (bp->flash_info->buffered == 0) {
+ flash_buffer = kmalloc(264, GFP_KERNEL);
+ if (flash_buffer == NULL) {
+ rc = -ENOMEM;
+ goto nvram_write_end;
+ }
+ }
+
written = 0;
while ((written < len32) && (rc == 0)) {
u32 page_start, page_end, data_start, data_end;
u32 addr, cmd_flags;
int i;
- u8 flash_buffer[264];
/* Find the page_start addr */
page_start = offset32 + written;
@@ -3061,7 +3068,7 @@
}
/* Loop to write the new data from data_start to data_end */
- for (addr = data_start; addr < data_end; addr += 4, i++) {
+ for (addr = data_start; addr < data_end; addr += 4, i += 4) {
if ((addr == page_end - 4) ||
((bp->flash_info->buffered) &&
(addr == data_end - 4))) {
@@ -3109,6 +3116,9 @@
}
nvram_write_end:
+ if (bp->flash_info->buffered == 0)
+ kfree(flash_buffer);
+
if (align_start || align_end)
kfree(buf);
return rc;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index f7235c9..705e122 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -2891,78 +2891,6 @@
goto out_drain;
}
- if (np->msi_flags & NV_MSI_X_CAPABLE) {
- for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
- np->msi_x_entry[i].entry = i;
- }
- if ((ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK))) == 0) {
- np->msi_flags |= NV_MSI_X_ENABLED;
- if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) {
- /* Request irq for rx handling */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, SA_SHIRQ, dev->name, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
- pci_disable_msix(np->pci_dev);
- np->msi_flags &= ~NV_MSI_X_ENABLED;
- goto out_drain;
- }
- /* Request irq for tx handling */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, SA_SHIRQ, dev->name, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
- pci_disable_msix(np->pci_dev);
- np->msi_flags &= ~NV_MSI_X_ENABLED;
- goto out_drain;
- }
- /* Request irq for link and timer handling */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, SA_SHIRQ, dev->name, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
- pci_disable_msix(np->pci_dev);
- np->msi_flags &= ~NV_MSI_X_ENABLED;
- goto out_drain;
- }
-
- /* map interrupts to their respective vector */
- writel(0, base + NvRegMSIXMap0);
- writel(0, base + NvRegMSIXMap1);
- set_msix_vector_map(dev, NV_MSI_X_VECTOR_RX, NVREG_IRQ_RX_ALL);
- set_msix_vector_map(dev, NV_MSI_X_VECTOR_TX, NVREG_IRQ_TX_ALL);
- set_msix_vector_map(dev, NV_MSI_X_VECTOR_OTHER, NVREG_IRQ_OTHER);
- } else {
- /* Request irq for all interrupts */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
- pci_disable_msix(np->pci_dev);
- np->msi_flags &= ~NV_MSI_X_ENABLED;
- goto out_drain;
- }
-
- /* map interrupts to vector 0 */
- writel(0, base + NvRegMSIXMap0);
- writel(0, base + NvRegMSIXMap1);
- }
- }
- }
- if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
- if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
- np->msi_flags |= NV_MSI_ENABLED;
- if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
- pci_disable_msi(np->pci_dev);
- np->msi_flags &= ~NV_MSI_ENABLED;
- goto out_drain;
- }
-
- /* map interrupts to vector 0 */
- writel(0, base + NvRegMSIMap0);
- writel(0, base + NvRegMSIMap1);
- /* enable msi vector 0 */
- writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
- }
- }
- if (ret != 0) {
- if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0)
- goto out_drain;
- }
-
/* ask for interrupts */
nv_enable_hw_interrupts(dev, np->irqmask);
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 448a094..2ea66ac 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1691,17 +1691,6 @@
memset(ei_local->mcfilter, 0xFF, 8);
}
- /*
- * DP8390 manuals don't specify any magic sequence for altering
- * the multicast regs on an already running card. To be safe, we
- * ensure multicast mode is off prior to loading up the new hash
- * table. If this proves to be not enough, we can always resort
- * to stopping the NIC, loading the table and then restarting.
- */
-
- if (netif_running(dev))
- outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR);
-
outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD);
for(i = 0; i < 8; i++)
{
@@ -1715,6 +1704,8 @@
outb_p(E8390_RXCONFIG | 0x48, e8390_base + EN0_RXCR);
else
outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR);
+
+ outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD);
}
/*
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index a70c2b0..5ca5a1b 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -78,8 +78,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
- { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },
- { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) }, /* DGE-530T */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
{ PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) },
@@ -402,7 +401,7 @@
int err;
if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE ||
- p->tx_pending == 0 || p->tx_pending > MAX_TX_RING_SIZE)
+ p->tx_pending < MAX_SKB_FRAGS+1 || p->tx_pending > MAX_TX_RING_SIZE)
return -EINVAL;
skge->rx_ring.count = p->rx_pending;
@@ -2717,8 +2716,7 @@
if (control & BMU_OWN)
break;
- skb = skge_rx_get(skge, e, control, rd->status,
- le16_to_cpu(rd->csum2));
+ skb = skge_rx_get(skge, e, control, rd->status, rd->csum2);
if (likely(skb)) {
dev->last_rx = jiffies;
netif_receive_skb(skb);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 62be6d9..60779eb 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -51,7 +51,7 @@
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.3"
+#define DRV_VERSION "1.4"
#define PFX DRV_NAME " "
/*
@@ -105,6 +105,7 @@
static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) },
@@ -235,6 +236,7 @@
}
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
reg1 &= P_ASPM_CONTROL_MSK;
@@ -306,7 +308,7 @@
u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
if (sky2->autoneg == AUTONEG_ENABLE &&
- (hw->chip_id != CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
+ !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
@@ -1020,19 +1022,26 @@
struct sky2_hw *hw = sky2->hw;
unsigned port = sky2->port;
u32 ramsize, rxspace, imask;
- int err;
+ int cap, err = -ENOMEM;
struct net_device *otherdev = hw->dev[sky2->port^1];
- /* Block bringing up both ports at the same time on a dual port card.
- * There is an unfixed bug where receiver gets confused and picks up
- * packets out of order. Until this is fixed, prevent data corruption.
+ /*
+ * On dual port PCI-X card, there is an problem where status
+ * can be received out of order due to split transactions
*/
- if (otherdev && netif_running(otherdev)) {
- printk(KERN_INFO PFX "dual port support is disabled.\n");
- return -EBUSY;
- }
+ if (otherdev && netif_running(otherdev) &&
+ (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
+ struct sky2_port *osky2 = netdev_priv(otherdev);
+ u16 cmd;
- err = -ENOMEM;
+ cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
+ cmd &= ~PCI_X_CMD_MAX_SPLIT;
+ sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
+
+ sky2->rx_csum = 0;
+ osky2->rx_csum = 0;
+ }
+
if (netif_msg_ifup(sky2))
printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
@@ -1910,6 +1919,12 @@
}
}
+/* Is status ring empty or is there more to do? */
+static inline int sky2_more_work(const struct sky2_hw *hw)
+{
+ return (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX));
+}
+
/* Process status response ring */
static int sky2_status_intr(struct sky2_hw *hw, int to_do)
{
@@ -2182,19 +2197,19 @@
if (status & Y2_IS_CHK_TXA2)
sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
- if (status & Y2_IS_STAT_BMU)
- sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
-
work_done = sky2_status_intr(hw, work_limit);
*budget -= work_done;
dev0->quota -= work_done;
- if (work_done >= work_limit)
+ if (status & Y2_IS_STAT_BMU)
+ sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+
+ if (sky2_more_work(hw))
return 1;
netif_rx_complete(dev0);
- status = sky2_read32(hw, B0_Y2_SP_LISR);
+ sky2_read32(hw, B0_Y2_SP_LISR);
return 0;
}
@@ -3078,12 +3093,7 @@
sky2->duplex = -1;
sky2->speed = -1;
sky2->advertising = sky2_supported_modes(hw);
-
- /* Receive checksum disabled for Yukon XL
- * because of observed problems with incorrect
- * values when multiple packets are received in one interrupt
- */
- sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
+ sky2->rx_csum = 1;
spin_lock_init(&sky2->phy_lock);
sky2->tx_pending = TX_DEF_PENDING;
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 8012994..8a0bc55 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -214,6 +214,8 @@
enum {
Y2_VMAIN_AVAIL = 1<<17,/* VMAIN available (YUKON-2 only) */
Y2_VAUX_AVAIL = 1<<16,/* VAUX available (YUKON-2 only) */
+ Y2_HW_WOL_ON = 1<<15,/* HW WOL On (Yukon-EC Ultra A1 only) */
+ Y2_HW_WOL_OFF = 1<<14,/* HW WOL On (Yukon-EC Ultra A1 only) */
Y2_ASF_ENABLE = 1<<13,/* ASF Unit Enable (YUKON-2 only) */
Y2_ASF_DISABLE = 1<<12,/* ASF Unit Disable (YUKON-2 only) */
Y2_CLK_RUN_ENA = 1<<11,/* CLK_RUN Enable (YUKON-2 only) */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e1b33a2..49ad60b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.57"
-#define DRV_MODULE_RELDATE "Apr 28, 2006"
+#define DRV_MODULE_VERSION "3.58"
+#define DRV_MODULE_RELDATE "May 22, 2006"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -6488,6 +6488,10 @@
TG3_STAT_ADD32(&sp->rx_frame_too_long_errors, MAC_RX_STATS_FRAME_TOO_LONG);
TG3_STAT_ADD32(&sp->rx_jabbers, MAC_RX_STATS_JABBERS);
TG3_STAT_ADD32(&sp->rx_undersize_packets, MAC_RX_STATS_UNDERSIZE);
+
+ TG3_STAT_ADD32(&sp->rxbds_empty, RCVLPC_NO_RCV_BD_CNT);
+ TG3_STAT_ADD32(&sp->rx_discards, RCVLPC_IN_DISCARDS_CNT);
+ TG3_STAT_ADD32(&sp->rx_errors, RCVLPC_IN_ERRORS_CNT);
}
static void tg3_timer(unsigned long __opaque)
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index ba05ded..136a70c 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -850,7 +850,7 @@
break;
skb->dev = dev; /* Mark as being used by this device. */
np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data,
- skb->len,PCI_DMA_FROMDEVICE);
+ np->rx_buf_sz,PCI_DMA_FROMDEVICE);
np->rx_ring[i].buffer1 = np->rx_addr[i];
np->rx_ring[i].status = DescOwn;
@@ -1316,7 +1316,7 @@
skb->dev = dev; /* Mark as being used by this device. */
np->rx_addr[entry] = pci_map_single(np->pci_dev,
skb->data,
- skb->len, PCI_DMA_FROMDEVICE);
+ np->rx_buf_sz, PCI_DMA_FROMDEVICE);
np->rx_ring[entry].buffer1 = np->rx_addr[entry];
}
wmb();
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index a6dc53b..fdc2103 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -491,8 +491,6 @@
u8 tx_thresh, rx_thresh;
struct mii_if_info mii_if;
- struct work_struct tx_timeout_task;
- struct work_struct check_media_task;
void __iomem *base;
};
@@ -500,8 +498,6 @@
static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
static int rhine_open(struct net_device *dev);
static void rhine_tx_timeout(struct net_device *dev);
-static void rhine_tx_timeout_task(struct net_device *dev);
-static void rhine_check_media_task(struct net_device *dev);
static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
static void rhine_tx(struct net_device *dev);
@@ -856,12 +852,6 @@
if (rp->quirks & rqRhineI)
dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
- INIT_WORK(&rp->tx_timeout_task,
- (void (*)(void *))rhine_tx_timeout_task, dev);
-
- INIT_WORK(&rp->check_media_task,
- (void (*)(void *))rhine_check_media_task, dev);
-
/* dev->name not defined before register_netdev()! */
rc = register_netdev(dev);
if (rc)
@@ -1108,11 +1098,6 @@
netif_carrier_ok(mii->dev));
}
-static void rhine_check_media_task(struct net_device *dev)
-{
- rhine_check_media(dev, 0);
-}
-
static void init_registers(struct net_device *dev)
{
struct rhine_private *rp = netdev_priv(dev);
@@ -1166,8 +1151,8 @@
if (quirks & rqRhineI) {
iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR
- /* Do not call from ISR! */
- msleep(1);
+ /* Can be called from ISR. Evil. */
+ mdelay(1);
/* 0x80 must be set immediately before turning it off */
iowrite8(0x80, ioaddr + MIICmd);
@@ -1257,16 +1242,6 @@
static void rhine_tx_timeout(struct net_device *dev)
{
struct rhine_private *rp = netdev_priv(dev);
-
- /*
- * Move bulk of work outside of interrupt context
- */
- schedule_work(&rp->tx_timeout_task);
-}
-
-static void rhine_tx_timeout_task(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
void __iomem *ioaddr = rp->base;
printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
@@ -1677,7 +1652,7 @@
spin_lock(&rp->lock);
if (intr_status & IntrLinkChange)
- schedule_work(&rp->check_media_task);
+ rhine_check_media(dev, 0);
if (intr_status & IntrStatsMax) {
rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
@@ -1927,9 +1902,6 @@
spin_unlock_irq(&rp->lock);
free_irq(rp->pdev->irq, dev);
-
- flush_scheduled_work();
-
free_rbufs(dev);
free_tbufs(dev);
free_ring(dev);
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index e2982a8..7ed18ca 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -3271,6 +3271,9 @@
bcm43xx_sysfs_register(bcm);
//FIXME: check for bcm43xx_sysfs_register failure. This function is a bit messy regarding unwinding, though...
+ /*FIXME: This should be handled by softmac instead. */
+ schedule_work(&bcm->softmac->associnfo.work);
+
assert(err == 0);
out:
return err;
@@ -3946,9 +3949,6 @@
netif_device_attach(net_dev);
- /*FIXME: This should be handled by softmac instead. */
- schedule_work(&bcm->softmac->associnfo.work);
-
dprintk(KERN_INFO PFX "Device resumed.\n");
return 0;
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 06523e2..c2d0b09 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -812,7 +812,6 @@
if (datalen > IEEE80211_DATA_LEN + 12) {
printk(KERN_DEBUG "%s: oversized monitor frame, "
"data length = %d\n", dev->name, datalen);
- err = -EIO;
stats->rx_length_errors++;
goto update_stats;
}
@@ -821,8 +820,7 @@
if (!skb) {
printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
dev->name);
- err = -ENOMEM;
- goto drop;
+ goto update_stats;
}
/* Copy the 802.11 header to the skb */
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 6917c6c..c2ecae5 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -33,13 +33,10 @@
acpi_status status;
struct acpi_object_list input;
union acpi_object in_params[4];
- struct acpi_buffer output;
- union acpi_object out_obj;
+ struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object *out_obj;
u32 osc_dw0;
- /* Setting up output buffer */
- output.length = sizeof(out_obj) + 3*sizeof(u32);
- output.pointer = &out_obj;
/* Setting up input parameters */
input.count = 4;
@@ -61,12 +58,15 @@
"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
return status;
}
- if (out_obj.type != ACPI_TYPE_BUFFER) {
+ out_obj = output.pointer;
+
+ if (out_obj->type != ACPI_TYPE_BUFFER) {
printk(KERN_DEBUG
"Evaluate _OSC returns wrong type\n");
- return AE_TYPE;
+ status = AE_TYPE;
+ goto query_osc_out;
}
- osc_dw0 = *((u32 *) out_obj.buffer.pointer);
+ osc_dw0 = *((u32 *) out_obj->buffer.pointer);
if (osc_dw0) {
if (osc_dw0 & OSC_REQUEST_ERROR)
printk(KERN_DEBUG "_OSC request fails\n");
@@ -76,15 +76,21 @@
printk(KERN_DEBUG "_OSC invalid revision\n");
if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
/* Update Global Control Set */
- global_ctrlsets = *((u32 *)(out_obj.buffer.pointer+8));
- return AE_OK;
+ global_ctrlsets = *((u32 *)(out_obj->buffer.pointer+8));
+ status = AE_OK;
+ goto query_osc_out;
}
- return AE_ERROR;
+ status = AE_ERROR;
+ goto query_osc_out;
}
/* Update Global Control Set */
- global_ctrlsets = *((u32 *)(out_obj.buffer.pointer + 8));
- return AE_OK;
+ global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8));
+ status = AE_OK;
+
+query_osc_out:
+ kfree(output.pointer);
+ return status;
}
@@ -96,14 +102,10 @@
acpi_status status;
struct acpi_object_list input;
union acpi_object in_params[4];
- struct acpi_buffer output;
- union acpi_object out_obj;
+ struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object *out_obj;
u32 osc_dw0;
- /* Setting up output buffer */
- output.length = sizeof(out_obj) + 3*sizeof(u32);
- output.pointer = &out_obj;
-
/* Setting up input parameters */
input.count = 4;
input.pointer = in_params;
@@ -124,12 +126,14 @@
"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
return status;
}
- if (out_obj.type != ACPI_TYPE_BUFFER) {
+ out_obj = output.pointer;
+ if (out_obj->type != ACPI_TYPE_BUFFER) {
printk(KERN_DEBUG
"Evaluate _OSC returns wrong type\n");
- return AE_TYPE;
+ status = AE_TYPE;
+ goto run_osc_out;
}
- osc_dw0 = *((u32 *) out_obj.buffer.pointer);
+ osc_dw0 = *((u32 *) out_obj->buffer.pointer);
if (osc_dw0) {
if (osc_dw0 & OSC_REQUEST_ERROR)
printk(KERN_DEBUG "_OSC request fails\n");
@@ -139,11 +143,17 @@
printk(KERN_DEBUG "_OSC invalid revision\n");
if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
printk(KERN_DEBUG "_OSC FW not grant req. control\n");
- return AE_SUPPORT;
+ status = AE_SUPPORT;
+ goto run_osc_out;
}
- return AE_ERROR;
+ status = AE_ERROR;
+ goto run_osc_out;
}
- return AE_OK;
+ status = AE_OK;
+
+run_osc_out:
+ kfree(output.pointer);
+ return status;
}
/**
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 16d1ea7..247ab83 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -589,7 +589,7 @@
return 0;
}
-static u_int __init pd6729_isa_scan(void)
+static u_int __devinit pd6729_isa_scan(void)
{
u_int mask0, mask = 0;
int i;
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 6c9ad92..2011567 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -141,13 +141,13 @@
/* try the driver's ioctl interface */
if (ops->ioctl) {
err = ops->ioctl(class_dev->dev, cmd, arg);
- if (err != -EINVAL)
+ if (err != -ENOIOCTLCMD)
return err;
}
/* if the driver does not provide the ioctl interface
* or if that particular ioctl was not implemented
- * (-EINVAL), we will try to emulate here.
+ * (-ENOIOCTLCMD), we will try to emulate here.
*/
switch (cmd) {
@@ -233,7 +233,7 @@
break;
default:
- err = -EINVAL;
+ err = -ENOTTY;
break;
}
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 2bc8aad..a997529 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -247,7 +247,7 @@
rtc_freq = arg;
return 0;
}
- return -EINVAL;
+ return -ENOIOCTLCMD;
}
static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
diff --git a/drivers/rtc/rtc-test.c b/drivers/rtc/rtc-test.c
index e1f7e8e..e1fa5fe 100644
--- a/drivers/rtc/rtc-test.c
+++ b/drivers/rtc/rtc-test.c
@@ -71,7 +71,7 @@
return 0;
default:
- return -EINVAL;
+ return -ENOIOCTLCMD;
}
}
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index 4d49fd5..277596c 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -270,7 +270,7 @@
epoch = arg;
break;
default:
- return -EINVAL;
+ return -ENOIOCTLCMD;
}
return 0;
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index d40e7c8..56cb490 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4054,7 +4054,7 @@
}
sdev_printk(KERN_WARNING, SDp,
- "Attached scsi tape %s", tape_name(tpnt));
+ "Attached scsi tape %s\n", tape_name(tpnt));
printk(KERN_WARNING "%s: try direct i/o: %s (alignment %d B)\n",
tape_name(tpnt), tpnt->try_dio ? "yes" : "no",
queue_dma_alignment(SDp->request_queue) + 1);
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 1c4396c..2b4f965 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1730,3 +1730,4 @@
module_init(sunsu_probe);
module_exit(sunsu_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 9ce1d01..23334c8 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -75,6 +75,18 @@
inexpensive battery powered microcontroller evaluation board.
This same cable can be used to flash new firmware.
+config SPI_MPC83xx
+ tristate "Freescale MPC83xx SPI controller"
+ depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
+ select SPI_BITBANG
+ help
+ This enables using the Freescale MPC83xx SPI controller in master
+ mode.
+
+ Note, this driver uniquely supports the SPI controller on the MPC83xx
+ family of PowerPC processors. The MPC83xx uses a simple set of shift
+ registers for data (opposed to the CPM based descriptor model).
+
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
@@ -83,11 +95,25 @@
The driver can be configured to use any SSP port and additional
documentation can be found a Documentation/spi/pxa2xx.
+config SPI_S3C24XX_GPIO
+ tristate "Samsung S3C24XX series SPI by GPIO"
+ depends on SPI_MASTER && ARCH_S3C2410 && SPI_BITBANG && EXPERIMENTAL
+ help
+ SPI driver for Samsung S3C24XX series ARM SoCs using
+ GPIO lines to provide the SPI bus. This can be used where
+ the inbuilt hardware cannot provide the transfer mode, or
+ where the board is using non hardware connected pins.
#
# Add new SPI master controllers in alphabetical order above this line
#
+config SPI_S3C24XX
+ tristate "Samsung S3C24XX series SPI"
+ depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
+ help
+ SPI driver for Samsung S3C24XX series ARM SoCs
+
#
# There are lots of SPI device types, with sensors and memory
# being probably the most widely used ones.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 1bca5f9..8f4cb67 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -14,6 +14,9 @@
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
+obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
+obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
+obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 596bf82..29aec77 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -363,25 +363,30 @@
}
/* caller already set message->status; dma and pio irqs are blocked */
-static void giveback(struct spi_message *message, struct driver_data *drv_data)
+static void giveback(struct driver_data *drv_data)
{
struct spi_transfer* last_transfer;
+ unsigned long flags;
+ struct spi_message *msg;
- last_transfer = list_entry(message->transfers.prev,
+ spin_lock_irqsave(&drv_data->lock, flags);
+ msg = drv_data->cur_msg;
+ drv_data->cur_msg = NULL;
+ drv_data->cur_transfer = NULL;
+ drv_data->cur_chip = NULL;
+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ last_transfer = list_entry(msg->transfers.prev,
struct spi_transfer,
transfer_list);
if (!last_transfer->cs_change)
drv_data->cs_control(PXA2XX_CS_DEASSERT);
- message->state = NULL;
- if (message->complete)
- message->complete(message->context);
-
- drv_data->cur_msg = NULL;
- drv_data->cur_transfer = NULL;
- drv_data->cur_chip = NULL;
- queue_work(drv_data->workqueue, &drv_data->pump_messages);
+ msg->state = NULL;
+ if (msg->complete)
+ msg->complete(msg->context);
}
static int wait_ssp_rx_stall(void *ioaddr)
@@ -415,10 +420,11 @@
if (irq_status & DCSR_BUSERR) {
/* Disable interrupts, clear status and reset DMA */
+ write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(0, reg);
write_SSSR(drv_data->clear_sr, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
@@ -454,8 +460,8 @@
"dma_handler: ssp rx stall failed\n");
/* Clear and disable interrupts on SSP and DMA channels*/
- write_SSSR(drv_data->clear_sr, reg);
write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+ write_SSSR(drv_data->clear_sr, reg);
DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
@@ -497,10 +503,11 @@
irq_status = read_SSSR(reg) & drv_data->mask_sr;
if (irq_status & SSSR_ROR) {
/* Clear and disable interrupts on SSP and DMA channels*/
+ write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(0, reg);
write_SSSR(drv_data->clear_sr, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
unmap_dma_buffers(drv_data);
@@ -526,10 +533,10 @@
if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
/* Clear and disable interrupts on SSP and DMA channels*/
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(0, reg);
write_SSSR(drv_data->clear_sr, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
@@ -572,26 +579,30 @@
static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
{
- u32 irq_status;
struct spi_message *msg = drv_data->cur_msg;
void *reg = drv_data->ioaddr;
- irqreturn_t handled = IRQ_NONE;
unsigned long limit = loops_per_jiffy << 1;
+ u32 irq_status;
+ u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ?
+ drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;
- while ((irq_status = (read_SSSR(reg) & drv_data->mask_sr))) {
+ while ((irq_status = read_SSSR(reg) & irq_mask)) {
if (irq_status & SSSR_ROR) {
/* Clear and disable interrupts */
+ write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(0, reg);
write_SSSR(drv_data->clear_sr, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
if (flush(drv_data) == 0)
dev_err(&drv_data->pdev->dev,
"interrupt_transfer: flush fail\n");
+ /* Stop the SSP */
+
dev_warn(&drv_data->pdev->dev,
"interrupt_transfer: fifo overun\n");
@@ -613,6 +624,7 @@
if (drv_data->tx == drv_data->tx_end) {
/* Disable tx interrupt */
write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg);
+ irq_mask = drv_data->mask_sr & ~SSSR_TFS;
/* PXA25x_SSP has no timeout, read trailing bytes */
if (drv_data->ssp_type == PXA25x_SSP) {
@@ -630,10 +642,10 @@
|| (drv_data->rx == drv_data->rx_end)) {
/* Clear timeout */
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(0, reg);
write_SSSR(drv_data->clear_sr, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
/* Update total byte transfered */
msg->actual_length += drv_data->len;
@@ -648,24 +660,29 @@
/* Schedule transfer tasklet */
tasklet_schedule(&drv_data->pump_transfers);
-
- return IRQ_HANDLED;
}
-
- /* We did something */
- handled = IRQ_HANDLED;
}
- return handled;
+ /* We did something */
+ return IRQ_HANDLED;
}
static irqreturn_t ssp_int(int irq, void *dev_id, struct pt_regs *regs)
{
struct driver_data *drv_data = (struct driver_data *)dev_id;
+ void *reg = drv_data->ioaddr;
if (!drv_data->cur_msg) {
+
+ write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(0, reg);
+ write_SSSR(drv_data->clear_sr, reg);
+
dev_err(&drv_data->pdev->dev, "bad message state "
- "in interrupt handler\n");
+ "in interrupt handler");
+
/* Never fail */
return IRQ_HANDLED;
}
@@ -694,14 +711,14 @@
/* Handle for abort */
if (message->state == ERROR_STATE) {
message->status = -EIO;
- giveback(message, drv_data);
+ giveback(drv_data);
return;
}
/* Handle end of message */
if (message->state == DONE_STATE) {
message->status = 0;
- giveback(message, drv_data);
+ giveback(drv_data);
return;
}
@@ -718,7 +735,7 @@
if (flush(drv_data) == 0) {
dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
message->status = -EIO;
- giveback(message, drv_data);
+ giveback(drv_data);
return;
}
drv_data->n_bytes = chip->n_bytes;
@@ -782,7 +799,7 @@
cr0 = clk_div
| SSCR0_Motorola
- | SSCR0_DataSize(bits & 0x0f)
+ | SSCR0_DataSize(bits > 16 ? bits - 16 : bits)
| SSCR0_SSE
| (bits > 16 ? SSCR0_EDSS : 0);
@@ -890,8 +907,6 @@
drv_data->cur_msg = list_entry(drv_data->queue.next,
struct spi_message, queue);
list_del_init(&drv_data->cur_msg->queue);
- drv_data->busy = 1;
- spin_unlock_irqrestore(&drv_data->lock, flags);
/* Initial message state*/
drv_data->cur_msg->state = START_STATE;
@@ -905,6 +920,9 @@
/* Mark as busy and launch transfers */
tasklet_schedule(&drv_data->pump_transfers);
+
+ drv_data->busy = 1;
+ spin_unlock_irqrestore(&drv_data->lock, flags);
}
static int transfer(struct spi_device *spi, struct spi_message *msg)
@@ -958,7 +976,7 @@
chip->cs_control = null_cs_control;
chip->enable_dma = 0;
- chip->timeout = 5;
+ chip->timeout = SSP_TIMEOUT(1000);
chip->threshold = SSCR1_RxTresh(1) | SSCR1_TxTresh(1);
chip->dma_burst_size = drv_data->master_info->enable_dma ?
DCMD_BURST8 : 0;
@@ -971,7 +989,7 @@
if (chip_info->cs_control)
chip->cs_control = chip_info->cs_control;
- chip->timeout = (chip_info->timeout_microsecs * 10000) / 2712;
+ chip->timeout = SSP_TIMEOUT(chip_info->timeout_microsecs);
chip->threshold = SSCR1_RxTresh(chip_info->rx_threshold)
| SSCR1_TxTresh(chip_info->tx_threshold);
@@ -1013,7 +1031,8 @@
chip->cr0 = clk_div
| SSCR0_Motorola
- | SSCR0_DataSize(spi->bits_per_word & 0x0f)
+ | SSCR0_DataSize(spi->bits_per_word > 16 ?
+ spi->bits_per_word - 16 : spi->bits_per_word)
| SSCR0_SSE
| (spi->bits_per_word > 16 ? SSCR0_EDSS : 0);
chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) << 4)
@@ -1196,7 +1215,7 @@
goto out_error_master_alloc;
}
- drv_data->ioaddr = (void *)io_p2v(memory_resource->start);
+ drv_data->ioaddr = (void *)io_p2v((unsigned long)(memory_resource->start));
drv_data->ssdr_physical = memory_resource->start + 0x00000010;
if (platform_info->ssp_type == PXA25x_SSP) {
drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
@@ -1218,7 +1237,7 @@
goto out_error_master_alloc;
}
- status = request_irq(irq, ssp_int, SA_INTERRUPT, dev->bus_id, drv_data);
+ status = request_irq(irq, ssp_int, 0, dev->bus_id, drv_data);
if (status < 0) {
dev_err(&pdev->dev, "can not get IRQ\n");
goto out_error_master_alloc;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 7a3f733..1cea4a6 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -338,18 +338,18 @@
* spi_alloc_master - allocate SPI master controller
* @dev: the controller, possibly using the platform_bus
* @size: how much driver-private data to preallocate; the pointer to this
- * memory is in the class_data field of the returned class_device,
+ * memory is in the class_data field of the returned class_device,
* accessible with spi_master_get_devdata().
*
* This call is used only by SPI master controller drivers, which are the
* only ones directly touching chip registers. It's how they allocate
- * an spi_master structure, prior to calling spi_add_master().
+ * an spi_master structure, prior to calling spi_register_master().
*
* This must be called from context that can sleep. It returns the SPI
* master structure on success, else NULL.
*
* The caller is responsible for assigning the bus number and initializing
- * the master's methods before calling spi_add_master(); and (after errors
+ * the master's methods before calling spi_register_master(); and (after errors
* adding the device) calling spi_master_put() to prevent a memory leak.
*/
struct spi_master * __init_or_module
diff --git a/drivers/spi/spi_butterfly.c b/drivers/spi/spi_butterfly.c
index ff9e5fa..a006a1e 100644
--- a/drivers/spi/spi_butterfly.c
+++ b/drivers/spi/spi_butterfly.c
@@ -321,6 +321,7 @@
* (firmware resets at45, acts as spi slave) or neither (we ignore
* both, AVR uses AT45). Here we expect firmware for the first option.
*/
+
pp->info[0].max_speed_hz = 15 * 1000 * 1000;
strcpy(pp->info[0].modalias, "mtd_dataflash");
pp->info[0].platform_data = &flash;
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
new file mode 100644
index 0000000..5d92a7e
--- /dev/null
+++ b/drivers/spi/spi_mpc83xx.c
@@ -0,0 +1,483 @@
+/*
+ * MPC83xx SPI controller driver.
+ *
+ * Maintainer: Kumar Gala
+ *
+ * Copyright (C) 2006 Polycom, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+
+/* SPI Controller registers */
+struct mpc83xx_spi_reg {
+ u8 res1[0x20];
+ __be32 mode;
+ __be32 event;
+ __be32 mask;
+ __be32 command;
+ __be32 transmit;
+ __be32 receive;
+};
+
+/* SPI Controller mode register definitions */
+#define SPMODE_CI_INACTIVEHIGH (1 << 29)
+#define SPMODE_CP_BEGIN_EDGECLK (1 << 28)
+#define SPMODE_DIV16 (1 << 27)
+#define SPMODE_REV (1 << 26)
+#define SPMODE_MS (1 << 25)
+#define SPMODE_ENABLE (1 << 24)
+#define SPMODE_LEN(x) ((x) << 20)
+#define SPMODE_PM(x) ((x) << 16)
+
+/*
+ * Default for SPI Mode:
+ * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk
+ */
+#define SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \
+ SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf))
+
+/* SPIE register values */
+#define SPIE_NE 0x00000200 /* Not empty */
+#define SPIE_NF 0x00000100 /* Not full */
+
+/* SPIM register values */
+#define SPIM_NE 0x00000200 /* Not empty */
+#define SPIM_NF 0x00000100 /* Not full */
+
+/* SPI Controller driver's private data. */
+struct mpc83xx_spi {
+ /* bitbang has to be first */
+ struct spi_bitbang bitbang;
+ struct completion done;
+
+ struct mpc83xx_spi_reg __iomem *base;
+
+ /* rx & tx bufs from the spi_transfer */
+ const void *tx;
+ void *rx;
+
+ /* functions to deal with different sized buffers */
+ void (*get_rx) (u32 rx_data, struct mpc83xx_spi *);
+ u32(*get_tx) (struct mpc83xx_spi *);
+
+ unsigned int count;
+ u32 irq;
+
+ unsigned nsecs; /* (clock cycle time)/2 */
+
+ u32 sysclk;
+ void (*activate_cs) (u8 cs, u8 polarity);
+ void (*deactivate_cs) (u8 cs, u8 polarity);
+};
+
+static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val)
+{
+ out_be32(reg, val);
+}
+
+static inline u32 mpc83xx_spi_read_reg(__be32 __iomem * reg)
+{
+ return in_be32(reg);
+}
+
+#define MPC83XX_SPI_RX_BUF(type) \
+void mpc83xx_spi_rx_buf_##type(u32 data, struct mpc83xx_spi *mpc83xx_spi) \
+{ \
+ type * rx = mpc83xx_spi->rx; \
+ *rx++ = (type)data; \
+ mpc83xx_spi->rx = rx; \
+}
+
+#define MPC83XX_SPI_TX_BUF(type) \
+u32 mpc83xx_spi_tx_buf_##type(struct mpc83xx_spi *mpc83xx_spi) \
+{ \
+ u32 data; \
+ const type * tx = mpc83xx_spi->tx; \
+ data = *tx++; \
+ mpc83xx_spi->tx = tx; \
+ return data; \
+}
+
+MPC83XX_SPI_RX_BUF(u8)
+MPC83XX_SPI_RX_BUF(u16)
+MPC83XX_SPI_RX_BUF(u32)
+MPC83XX_SPI_TX_BUF(u8)
+MPC83XX_SPI_TX_BUF(u16)
+MPC83XX_SPI_TX_BUF(u32)
+
+static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
+{
+ struct mpc83xx_spi *mpc83xx_spi;
+ u8 pol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+
+ mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+ if (value == BITBANG_CS_INACTIVE) {
+ if (mpc83xx_spi->deactivate_cs)
+ mpc83xx_spi->deactivate_cs(spi->chip_select, pol);
+ }
+
+ if (value == BITBANG_CS_ACTIVE) {
+ u32 regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+ u32 len = spi->bits_per_word;
+ if (len == 32)
+ len = 0;
+ else
+ len = len - 1;
+
+ /* mask out bits we are going to set */
+ regval &= ~0x38ff0000;
+
+ if (spi->mode & SPI_CPHA)
+ regval |= SPMODE_CP_BEGIN_EDGECLK;
+ if (spi->mode & SPI_CPOL)
+ regval |= SPMODE_CI_INACTIVEHIGH;
+
+ regval |= SPMODE_LEN(len);
+
+ if ((mpc83xx_spi->sysclk / spi->max_speed_hz) >= 64) {
+ u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 64);
+ regval |= SPMODE_PM(pm) | SPMODE_DIV16;
+ } else {
+ u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 4);
+ regval |= SPMODE_PM(pm);
+ }
+
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+ if (mpc83xx_spi->activate_cs)
+ mpc83xx_spi->activate_cs(spi->chip_select, pol);
+ }
+}
+
+static
+int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct mpc83xx_spi *mpc83xx_spi;
+ u32 regval;
+ u8 bits_per_word;
+ u32 hz;
+
+ mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+ if (t) {
+ bits_per_word = t->bits_per_word;
+ hz = t->speed_hz;
+ } else {
+ bits_per_word = 0;
+ hz = 0;
+ }
+
+ /* spi_transfer level calls that work per-word */
+ if (!bits_per_word)
+ bits_per_word = spi->bits_per_word;
+
+ /* Make sure its a bit width we support [4..16, 32] */
+ if ((bits_per_word < 4)
+ || ((bits_per_word > 16) && (bits_per_word != 32)))
+ return -EINVAL;
+
+ if (bits_per_word <= 8) {
+ mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
+ mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+ } else if (bits_per_word <= 16) {
+ mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u16;
+ mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u16;
+ } else if (bits_per_word <= 32) {
+ mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u32;
+ mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u32;
+ } else
+ return -EINVAL;
+
+ /* nsecs = (clock period)/2 */
+ if (!hz)
+ hz = spi->max_speed_hz;
+ mpc83xx_spi->nsecs = (1000000000 / 2) / hz;
+ if (mpc83xx_spi->nsecs > MAX_UDELAY_MS * 1000)
+ return -EINVAL;
+
+ if (bits_per_word == 32)
+ bits_per_word = 0;
+ else
+ bits_per_word = bits_per_word - 1;
+
+ regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+
+ /* Mask out bits_per_wordgth */
+ regval &= 0xff0fffff;
+ regval |= SPMODE_LEN(bits_per_word);
+
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+
+ return 0;
+}
+
+static int mpc83xx_spi_setup(struct spi_device *spi)
+{
+ struct spi_bitbang *bitbang;
+ struct mpc83xx_spi *mpc83xx_spi;
+ int retval;
+
+ if (!spi->max_speed_hz)
+ return -EINVAL;
+
+ bitbang = spi_master_get_devdata(spi->master);
+ mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ retval = mpc83xx_spi_setup_transfer(spi, NULL);
+ if (retval < 0)
+ return retval;
+
+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
+ __FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
+ spi->bits_per_word, 2 * mpc83xx_spi->nsecs);
+
+ /* NOTE we _need_ to call chipselect() early, ideally with adapter
+ * setup, unless the hardware defaults cooperate to avoid confusion
+ * between normal (active low) and inverted chipselects.
+ */
+
+ /* deselect chip (low or high) */
+ spin_lock(&bitbang->lock);
+ if (!bitbang->busy) {
+ bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+ ndelay(mpc83xx_spi->nsecs);
+ }
+ spin_unlock(&bitbang->lock);
+
+ return 0;
+}
+
+static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct mpc83xx_spi *mpc83xx_spi;
+ u32 word;
+
+ mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+ mpc83xx_spi->tx = t->tx_buf;
+ mpc83xx_spi->rx = t->rx_buf;
+ mpc83xx_spi->count = t->len;
+ INIT_COMPLETION(mpc83xx_spi->done);
+
+ /* enable rx ints */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, SPIM_NE);
+
+ /* transmit word */
+ word = mpc83xx_spi->get_tx(mpc83xx_spi);
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word);
+
+ wait_for_completion(&mpc83xx_spi->done);
+
+ /* disable rx ints */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
+
+ return t->len - mpc83xx_spi->count;
+}
+
+irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data,
+ struct pt_regs * ptregs)
+{
+ struct mpc83xx_spi *mpc83xx_spi = context_data;
+ u32 event;
+ irqreturn_t ret = IRQ_NONE;
+
+ /* Get interrupt events(tx/rx) */
+ event = mpc83xx_spi_read_reg(&mpc83xx_spi->base->event);
+
+ /* We need handle RX first */
+ if (event & SPIE_NE) {
+ u32 rx_data = mpc83xx_spi_read_reg(&mpc83xx_spi->base->receive);
+
+ if (mpc83xx_spi->rx)
+ mpc83xx_spi->get_rx(rx_data, mpc83xx_spi);
+
+ ret = IRQ_HANDLED;
+ }
+
+ if ((event & SPIE_NF) == 0)
+ /* spin until TX is done */
+ while (((event =
+ mpc83xx_spi_read_reg(&mpc83xx_spi->base->event)) &
+ SPIE_NF) == 0)
+ cpu_relax();
+
+ mpc83xx_spi->count -= 1;
+ if (mpc83xx_spi->count) {
+ if (mpc83xx_spi->tx) {
+ u32 word = mpc83xx_spi->get_tx(mpc83xx_spi);
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit,
+ word);
+ }
+ } else {
+ complete(&mpc83xx_spi->done);
+ }
+
+ /* Clear the events */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, event);
+
+ return ret;
+}
+
+static int __init mpc83xx_spi_probe(struct platform_device *dev)
+{
+ struct spi_master *master;
+ struct mpc83xx_spi *mpc83xx_spi;
+ struct fsl_spi_platform_data *pdata;
+ struct resource *r;
+ u32 regval;
+ int ret = 0;
+
+ /* Get resources(memory, IRQ) associated with the device */
+ master = spi_alloc_master(&dev->dev, sizeof(struct mpc83xx_spi));
+
+ if (master == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ platform_set_drvdata(dev, master);
+ pdata = dev->dev.platform_data;
+
+ if (pdata == NULL) {
+ ret = -ENODEV;
+ goto free_master;
+ }
+
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ ret = -ENODEV;
+ goto free_master;
+ }
+
+ mpc83xx_spi = spi_master_get_devdata(master);
+ mpc83xx_spi->bitbang.master = spi_master_get(master);
+ mpc83xx_spi->bitbang.chipselect = mpc83xx_spi_chipselect;
+ mpc83xx_spi->bitbang.setup_transfer = mpc83xx_spi_setup_transfer;
+ mpc83xx_spi->bitbang.txrx_bufs = mpc83xx_spi_bufs;
+ mpc83xx_spi->sysclk = pdata->sysclk;
+ mpc83xx_spi->activate_cs = pdata->activate_cs;
+ mpc83xx_spi->deactivate_cs = pdata->deactivate_cs;
+ mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
+ mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+
+ mpc83xx_spi->bitbang.master->setup = mpc83xx_spi_setup;
+ init_completion(&mpc83xx_spi->done);
+
+ mpc83xx_spi->base = ioremap(r->start, r->end - r->start + 1);
+ if (mpc83xx_spi->base == NULL) {
+ ret = -ENOMEM;
+ goto put_master;
+ }
+
+ mpc83xx_spi->irq = platform_get_irq(dev, 0);
+
+ if (mpc83xx_spi->irq < 0) {
+ ret = -ENXIO;
+ goto unmap_io;
+ }
+
+ /* Register for SPI Interrupt */
+ ret = request_irq(mpc83xx_spi->irq, mpc83xx_spi_irq,
+ 0, "mpc83xx_spi", mpc83xx_spi);
+
+ if (ret != 0)
+ goto unmap_io;
+
+ master->bus_num = pdata->bus_num;
+ master->num_chipselect = pdata->max_chipselect;
+
+ /* SPI controller initializations */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->command, 0);
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, 0xffffffff);
+
+ /* Enable SPI interface */
+ regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+
+ ret = spi_bitbang_start(&mpc83xx_spi->bitbang);
+
+ if (ret != 0)
+ goto free_irq;
+
+ printk(KERN_INFO
+ "%s: MPC83xx SPI Controller driver at 0x%p (irq = %d)\n",
+ dev->dev.bus_id, mpc83xx_spi->base, mpc83xx_spi->irq);
+
+ return ret;
+
+free_irq:
+ free_irq(mpc83xx_spi->irq, mpc83xx_spi);
+unmap_io:
+ iounmap(mpc83xx_spi->base);
+put_master:
+ spi_master_put(master);
+free_master:
+ kfree(master);
+err:
+ return ret;
+}
+
+static int __devexit mpc83xx_spi_remove(struct platform_device *dev)
+{
+ struct mpc83xx_spi *mpc83xx_spi;
+ struct spi_master *master;
+
+ master = platform_get_drvdata(dev);
+ mpc83xx_spi = spi_master_get_devdata(master);
+
+ spi_bitbang_stop(&mpc83xx_spi->bitbang);
+ free_irq(mpc83xx_spi->irq, mpc83xx_spi);
+ iounmap(mpc83xx_spi->base);
+ spi_master_put(mpc83xx_spi->bitbang.master);
+
+ return 0;
+}
+
+static struct platform_driver mpc83xx_spi_driver = {
+ .probe = mpc83xx_spi_probe,
+ .remove = __devexit_p(mpc83xx_spi_remove),
+ .driver = {
+ .name = "mpc83xx_spi",
+ },
+};
+
+static int __init mpc83xx_spi_init(void)
+{
+ return platform_driver_register(&mpc83xx_spi_driver);
+}
+
+static void __exit mpc83xx_spi_exit(void)
+{
+ platform_driver_unregister(&mpc83xx_spi_driver);
+}
+
+module_init(mpc83xx_spi_init);
+module_exit(mpc83xx_spi_exit);
+
+MODULE_AUTHOR("Kumar Gala");
+MODULE_DESCRIPTION("Simple MPC83xx SPI Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
new file mode 100644
index 0000000..9de4b5a
--- /dev/null
+++ b/drivers/spi/spi_s3c24xx.c
@@ -0,0 +1,453 @@
+/* linux/drivers/spi/spi_s3c24xx.c
+ *
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+
+//#define DEBUG
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-spi.h>
+#include <asm/arch/spi.h>
+
+struct s3c24xx_spi {
+ /* bitbang has to be first */
+ struct spi_bitbang bitbang;
+ struct completion done;
+
+ void __iomem *regs;
+ int irq;
+ int len;
+ int count;
+
+ /* data buffers */
+ const unsigned char *tx;
+ unsigned char *rx;
+
+ struct clk *clk;
+ struct resource *ioarea;
+ struct spi_master *master;
+ struct spi_device *curdev;
+ struct device *dev;
+ struct s3c2410_spi_info *pdata;
+};
+
+#define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT)
+#define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP)
+
+static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev)
+{
+ return spi_master_get_devdata(sdev->master);
+}
+
+static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
+{
+ struct s3c24xx_spi *hw = to_hw(spi);
+ unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+ unsigned int spcon;
+
+ switch (value) {
+ case BITBANG_CS_INACTIVE:
+ if (hw->pdata->set_cs)
+ hw->pdata->set_cs(hw->pdata, value, cspol);
+ else
+ s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol ^ 1);
+ break;
+
+ case BITBANG_CS_ACTIVE:
+ spcon = readb(hw->regs + S3C2410_SPCON);
+
+ if (spi->mode & SPI_CPHA)
+ spcon |= S3C2410_SPCON_CPHA_FMTB;
+ else
+ spcon &= ~S3C2410_SPCON_CPHA_FMTB;
+
+ if (spi->mode & SPI_CPOL)
+ spcon |= S3C2410_SPCON_CPOL_HIGH;
+ else
+ spcon &= ~S3C2410_SPCON_CPOL_HIGH;
+
+ spcon |= S3C2410_SPCON_ENSCK;
+
+ /* write new configration */
+
+ writeb(spcon, hw->regs + S3C2410_SPCON);
+
+ if (hw->pdata->set_cs)
+ hw->pdata->set_cs(hw->pdata, value, cspol);
+ else
+ s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol);
+
+ break;
+
+ }
+}
+
+static int s3c24xx_spi_setupxfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct s3c24xx_spi *hw = to_hw(spi);
+ unsigned int bpw;
+ unsigned int hz;
+ unsigned int div;
+
+ bpw = t ? t->bits_per_word : spi->bits_per_word;
+ hz = t ? t->speed_hz : spi->max_speed_hz;
+
+ if (bpw != 8) {
+ dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
+ return -EINVAL;
+ }
+
+ div = clk_get_rate(hw->clk) / hz;
+
+ /* is clk = pclk / (2 * (pre+1)), or is it
+ * clk = (pclk * 2) / ( pre + 1) */
+
+ div = (div / 2) - 1;
+
+ if (div < 0)
+ div = 1;
+
+ if (div > 255)
+ div = 255;
+
+ dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
+ writeb(div, hw->regs + S3C2410_SPPRE);
+
+ spin_lock(&hw->bitbang.lock);
+ if (!hw->bitbang.busy) {
+ hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
+ /* need to ndelay for 0.5 clocktick ? */
+ }
+ spin_unlock(&hw->bitbang.lock);
+
+ return 0;
+}
+
+static int s3c24xx_spi_setup(struct spi_device *spi)
+{
+ int ret;
+
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ if ((spi->mode & SPI_LSB_FIRST) != 0)
+ return -EINVAL;
+
+ ret = s3c24xx_spi_setupxfer(spi, NULL);
+ if (ret < 0) {
+ dev_err(&spi->dev, "setupxfer returned %d\n", ret);
+ return ret;
+ }
+
+ dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n",
+ __FUNCTION__, spi->mode, spi->bits_per_word,
+ spi->max_speed_hz);
+
+ return 0;
+}
+
+static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
+{
+ return hw->tx ? hw->tx[count] : 0xff;
+}
+
+static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct s3c24xx_spi *hw = to_hw(spi);
+
+ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
+ t->tx_buf, t->rx_buf, t->len);
+
+ hw->tx = t->tx_buf;
+ hw->rx = t->rx_buf;
+ hw->len = t->len;
+ hw->count = 0;
+
+ /* send the first byte */
+ writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT);
+ wait_for_completion(&hw->done);
+
+ return hw->count;
+}
+
+static irqreturn_t s3c24xx_spi_irq(int irq, void *dev, struct pt_regs *regs)
+{
+ struct s3c24xx_spi *hw = dev;
+ unsigned int spsta = readb(hw->regs + S3C2410_SPSTA);
+ unsigned int count = hw->count;
+
+ if (spsta & S3C2410_SPSTA_DCOL) {
+ dev_dbg(hw->dev, "data-collision\n");
+ complete(&hw->done);
+ goto irq_done;
+ }
+
+ if (!(spsta & S3C2410_SPSTA_READY)) {
+ dev_dbg(hw->dev, "spi not ready for tx?\n");
+ complete(&hw->done);
+ goto irq_done;
+ }
+
+ hw->count++;
+
+ if (hw->rx)
+ hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT);
+
+ count++;
+
+ if (count < hw->len)
+ writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT);
+ else
+ complete(&hw->done);
+
+ irq_done:
+ return IRQ_HANDLED;
+}
+
+static int s3c24xx_spi_probe(struct platform_device *pdev)
+{
+ struct s3c24xx_spi *hw;
+ struct spi_master *master;
+ struct spi_board_info *bi;
+ struct resource *res;
+ int err = 0;
+ int i;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi));
+ if (master == NULL) {
+ dev_err(&pdev->dev, "No memory for spi_master\n");
+ err = -ENOMEM;
+ goto err_nomem;
+ }
+
+ hw = spi_master_get_devdata(master);
+ memset(hw, 0, sizeof(struct s3c24xx_spi));
+
+ hw->master = spi_master_get(master);
+ hw->pdata = pdev->dev.platform_data;
+ hw->dev = &pdev->dev;
+
+ if (hw->pdata == NULL) {
+ dev_err(&pdev->dev, "No platform data supplied\n");
+ err = -ENOENT;
+ goto err_no_pdata;
+ }
+
+ platform_set_drvdata(pdev, hw);
+ init_completion(&hw->done);
+
+ /* setup the state for the bitbang driver */
+
+ hw->bitbang.master = hw->master;
+ hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer;
+ hw->bitbang.chipselect = s3c24xx_spi_chipsel;
+ hw->bitbang.txrx_bufs = s3c24xx_spi_txrx;
+ hw->bitbang.master->setup = s3c24xx_spi_setup;
+
+ dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
+
+ /* find and map our resources */
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
+ err = -ENOENT;
+ goto err_no_iores;
+ }
+
+ hw->ioarea = request_mem_region(res->start, (res->end - res->start)+1,
+ pdev->name);
+
+ if (hw->ioarea == NULL) {
+ dev_err(&pdev->dev, "Cannot reserve region\n");
+ err = -ENXIO;
+ goto err_no_iores;
+ }
+
+ hw->regs = ioremap(res->start, (res->end - res->start)+1);
+ if (hw->regs == NULL) {
+ dev_err(&pdev->dev, "Cannot map IO\n");
+ err = -ENXIO;
+ goto err_no_iomap;
+ }
+
+ hw->irq = platform_get_irq(pdev, 0);
+ if (hw->irq < 0) {
+ dev_err(&pdev->dev, "No IRQ specified\n");
+ err = -ENOENT;
+ goto err_no_irq;
+ }
+
+ err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw);
+ if (err) {
+ dev_err(&pdev->dev, "Cannot claim IRQ\n");
+ goto err_no_irq;
+ }
+
+ hw->clk = clk_get(&pdev->dev, "spi");
+ if (IS_ERR(hw->clk)) {
+ dev_err(&pdev->dev, "No clock for device\n");
+ err = PTR_ERR(hw->clk);
+ goto err_no_clk;
+ }
+
+ /* for the moment, permanently enable the clock */
+
+ clk_enable(hw->clk);
+
+ /* program defaults into the registers */
+
+ writeb(0xff, hw->regs + S3C2410_SPPRE);
+ writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
+ writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+
+ /* setup any gpio we can */
+
+ if (!hw->pdata->set_cs) {
+ s3c2410_gpio_setpin(hw->pdata->pin_cs, 1);
+ s3c2410_gpio_cfgpin(hw->pdata->pin_cs, S3C2410_GPIO_OUTPUT);
+ }
+
+ /* register our spi controller */
+
+ err = spi_bitbang_start(&hw->bitbang);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to register SPI master\n");
+ goto err_register;
+ }
+
+ dev_dbg(hw->dev, "shutdown=%d\n", hw->bitbang.shutdown);
+
+ /* register all the devices associated */
+
+ bi = &hw->pdata->board_info[0];
+ for (i = 0; i < hw->pdata->board_size; i++, bi++) {
+ dev_info(hw->dev, "registering %s\n", bi->modalias);
+
+ bi->controller_data = hw;
+ spi_new_device(master, bi);
+ }
+
+ return 0;
+
+ err_register:
+ clk_disable(hw->clk);
+ clk_put(hw->clk);
+
+ err_no_clk:
+ free_irq(hw->irq, hw);
+
+ err_no_irq:
+ iounmap(hw->regs);
+
+ err_no_iomap:
+ release_resource(hw->ioarea);
+ kfree(hw->ioarea);
+
+ err_no_iores:
+ err_no_pdata:
+ spi_master_put(hw->master);;
+
+ err_nomem:
+ return err;
+}
+
+static int s3c24xx_spi_remove(struct platform_device *dev)
+{
+ struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+
+ platform_set_drvdata(dev, NULL);
+
+ spi_unregister_master(hw->master);
+
+ clk_disable(hw->clk);
+ clk_put(hw->clk);
+
+ free_irq(hw->irq, hw);
+ iounmap(hw->regs);
+
+ release_resource(hw->ioarea);
+ kfree(hw->ioarea);
+
+ spi_master_put(hw->master);
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+ struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+
+ clk_disable(hw->clk);
+ return 0;
+}
+
+static int s3c24xx_spi_resume(struct platform_device *pdev)
+{
+ struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+
+ clk_enable(hw->clk);
+ return 0;
+}
+
+#else
+#define s3c24xx_spi_suspend NULL
+#define s3c24xx_spi_resume NULL
+#endif
+
+static struct platform_driver s3c24xx_spidrv = {
+ .probe = s3c24xx_spi_probe,
+ .remove = s3c24xx_spi_remove,
+ .suspend = s3c24xx_spi_suspend,
+ .resume = s3c24xx_spi_resume,
+ .driver = {
+ .name = "s3c2410-spi",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init s3c24xx_spi_init(void)
+{
+ return platform_driver_register(&s3c24xx_spidrv);
+}
+
+static void __exit s3c24xx_spi_exit(void)
+{
+ platform_driver_unregister(&s3c24xx_spidrv);
+}
+
+module_init(s3c24xx_spi_init);
+module_exit(s3c24xx_spi_exit);
+
+MODULE_DESCRIPTION("S3C24XX SPI Driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
new file mode 100644
index 0000000..aacdceb
--- /dev/null
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -0,0 +1,188 @@
+/* linux/drivers/spi/spi_s3c24xx_gpio.c
+ *
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ *
+ * S3C24XX GPIO based SPI driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/spi-gpio.h>
+#include <asm/arch/hardware.h>
+
+struct s3c2410_spigpio {
+ struct spi_bitbang bitbang;
+
+ struct s3c2410_spigpio_info *info;
+ struct platform_device *dev;
+};
+
+static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi)
+{
+ return spi->controller_data;
+}
+
+static inline void setsck(struct spi_device *dev, int on)
+{
+ struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+ s3c2410_gpio_setpin(sg->info->pin_clk, on ? 1 : 0);
+}
+
+static inline void setmosi(struct spi_device *dev, int on)
+{
+ struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+ s3c2410_gpio_setpin(sg->info->pin_mosi, on ? 1 : 0);
+}
+
+static inline u32 getmiso(struct spi_device *dev)
+{
+ struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+ return s3c2410_gpio_getpin(sg->info->pin_miso) ? 1 : 0;
+}
+
+#define spidelay(x) ndelay(x)
+
+#define EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+
+static u32 s3c2410_spigpio_txrx_mode0(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+}
+
+static u32 s3c2410_spigpio_txrx_mode1(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+}
+
+static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value)
+{
+ struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+
+ if (sg->info && sg->info->chip_select)
+ (sg->info->chip_select)(sg->info, value);
+}
+
+static int s3c2410_spigpio_probe(struct platform_device *dev)
+{
+ struct spi_master *master;
+ struct s3c2410_spigpio *sp;
+ int ret;
+ int i;
+
+ master = spi_alloc_master(&dev->dev, sizeof(struct s3c2410_spigpio));
+ if (master == NULL) {
+ dev_err(&dev->dev, "failed to allocate spi master\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ sp = spi_master_get_devdata(master);
+
+ platform_set_drvdata(dev, sp);
+
+ /* copy in the plkatform data */
+ sp->info = dev->dev.platform_data;
+
+ /* setup spi bitbang adaptor */
+ sp->bitbang.master = spi_master_get(master);
+ sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
+
+ sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
+ sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1;
+
+ /* set state of spi pins */
+ s3c2410_gpio_setpin(sp->info->pin_clk, 0);
+ s3c2410_gpio_setpin(sp->info->pin_mosi, 0);
+
+ s3c2410_gpio_cfgpin(sp->info->pin_clk, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(sp->info->pin_mosi, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(sp->info->pin_miso, S3C2410_GPIO_INPUT);
+
+ ret = spi_bitbang_start(&sp->bitbang);
+ if (ret)
+ goto err_no_bitbang;
+
+ /* register the chips to go with the board */
+
+ for (i = 0; i < sp->info->board_size; i++) {
+ dev_info(&dev->dev, "registering %p: %s\n",
+ &sp->info->board_info[i],
+ sp->info->board_info[i].modalias);
+
+ sp->info->board_info[i].controller_data = sp;
+ spi_new_device(master, sp->info->board_info + i);
+ }
+
+ return 0;
+
+ err_no_bitbang:
+ spi_master_put(sp->bitbang.master);
+ err:
+ return ret;
+
+}
+
+static int s3c2410_spigpio_remove(struct platform_device *dev)
+{
+ struct s3c2410_spigpio *sp = platform_get_drvdata(dev);
+
+ spi_bitbang_stop(&sp->bitbang);
+ spi_master_put(sp->bitbang.master);
+
+ return 0;
+}
+
+/* all gpio should be held over suspend/resume, so we should
+ * not need to deal with this
+*/
+
+#define s3c2410_spigpio_suspend NULL
+#define s3c2410_spigpio_resume NULL
+
+
+static struct platform_driver s3c2410_spigpio_drv = {
+ .probe = s3c2410_spigpio_probe,
+ .remove = s3c2410_spigpio_remove,
+ .suspend = s3c2410_spigpio_suspend,
+ .resume = s3c2410_spigpio_resume,
+ .driver = {
+ .name = "s3c24xx-spi-gpio",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init s3c2410_spigpio_init(void)
+{
+ return platform_driver_register(&s3c2410_spigpio_drv);
+}
+
+static void __exit s3c2410_spigpio_exit(void)
+{
+ platform_driver_unregister(&s3c2410_spigpio_drv);
+}
+
+module_init(s3c2410_spigpio_init);
+module_exit(s3c2410_spigpio_exit);
+
+MODULE_DESCRIPTION("S3C24XX SPI Driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index 6dd6666..c4670e1 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -317,6 +317,7 @@
}
schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
}
set_current_state(TASK_RUNNING);
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 788297e..44aa2ff 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -76,8 +76,8 @@
*
* Experiment with v_offset to find out which works best for you.
*/
-static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
-static u32 voffset __initdata = 0;
+static u32 v_offset_default __devinitdata; /* For 32 MiB Aper size, 8 should be the default */
+static u32 voffset __devinitdata;
static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
static int __devinit i810fb_init_pci (struct pci_dev *dev,
diff --git a/drivers/video/matrox/g450_pll.c b/drivers/video/matrox/g450_pll.c
index 8073a73..440272a 100644
--- a/drivers/video/matrox/g450_pll.c
+++ b/drivers/video/matrox/g450_pll.c
@@ -316,14 +316,24 @@
case M_PIXEL_PLL_B:
case M_PIXEL_PLL_C:
{
- u_int8_t tmp;
+ u_int8_t tmp, xpwrctrl;
unsigned long flags;
matroxfb_DAC_lock_irqsave(flags);
+
+ xpwrctrl = matroxfb_DAC_in(PMINFO M1064_XPWRCTRL);
+ matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl & ~M1064_XPWRCTRL_PANELPDN);
+ mga_outb(M_SEQ_INDEX, M_SEQ1);
+ mga_outb(M_SEQ_DATA, mga_inb(M_SEQ_DATA) | M_SEQ1_SCROFF);
tmp = matroxfb_DAC_in(PMINFO M1064_XPIXCLKCTRL);
+ tmp |= M1064_XPIXCLKCTRL_DIS;
if (!(tmp & M1064_XPIXCLKCTRL_PLL_UP)) {
- matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp | M1064_XPIXCLKCTRL_PLL_UP);
+ tmp |= M1064_XPIXCLKCTRL_PLL_UP;
}
+ matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp);
+ matroxfb_DAC_out(PMINFO M1064_XDVICLKCTRL, 0);
+ matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl);
+
matroxfb_DAC_unlock_irqrestore(flags);
}
{
@@ -418,6 +428,15 @@
frequency to higher - with <= lowest wins, while
with < highest one wins */
if (delta <= deltaarray[idx-1]) {
+ /* all else being equal except VCO,
+ * choose VCO not near (within 1/16th or so) VCOmin
+ * (freqs near VCOmin aren't as stable)
+ */
+ if (delta == deltaarray[idx-1]
+ && vco != g450_mnp2vco(PMINFO mnparray[idx-1])
+ && vco < (pi->vcomin * 17 / 16)) {
+ break;
+ }
mnparray[idx] = mnparray[idx-1];
deltaarray[idx] = deltaarray[idx-1];
} else {
diff --git a/drivers/video/matrox/matroxfb_DAC1064.h b/drivers/video/matrox/matroxfb_DAC1064.h
index 2e7238a..56513a5 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.h
+++ b/drivers/video/matrox/matroxfb_DAC1064.h
@@ -40,6 +40,7 @@
#define M1064_XCURCOL1RED 0x0C
#define M1064_XCURCOL1GREEN 0x0D
#define M1064_XCURCOL1BLUE 0x0E
+#define M1064_XDVICLKCTRL 0x0F
#define M1064_XCURCOL2RED 0x10
#define M1064_XCURCOL2GREEN 0x11
#define M1064_XCURCOL2BLUE 0x12
@@ -144,6 +145,7 @@
#define M1064_XVIDPLLN 0x8F
#define M1064_XPWRCTRL 0xA0
+#define M1064_XPWRCTRL_PANELPDN 0x04
#define M1064_XPANMODE 0xA2
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h
index 3a3e180..b717371 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/matrox/matroxfb_base.h
@@ -672,6 +672,8 @@
#define M_SEQ_INDEX 0x1FC4
#define M_SEQ_DATA 0x1FC5
+#define M_SEQ1 0x01
+#define M_SEQ1_SCROFF 0x20
#define M_MISC_REG_READ 0x1FCC
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 69f44dc..b1c902e 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -428,7 +428,6 @@
loff_t fpos;
unsigned long start_code, end_code;
int ret;
- int exec_fileno;
hdr = ((struct flat_hdr *) bprm->buf); /* exec-header */
inode = bprm->file->f_dentry->d_inode;
@@ -502,21 +501,12 @@
goto err;
}
- /* check file descriptor */
- exec_fileno = get_unused_fd();
- if (exec_fileno < 0) {
- ret = -EMFILE;
- goto err;
- }
- get_file(bprm->file);
- fd_install(exec_fileno, bprm->file);
-
/* Flush all traces of the currently running executable */
if (id == 0) {
result = flush_old_exec(bprm);
if (result) {
ret = result;
- goto err_close;
+ goto err;
}
/* OK, This is the point of no return */
@@ -548,7 +538,7 @@
textpos = (unsigned long) -ENOMEM;
printk("Unable to mmap process text, errno %d\n", (int)-textpos);
ret = textpos;
- goto err_close;
+ goto err;
}
down_write(¤t->mm->mmap_sem);
@@ -564,7 +554,7 @@
(int)-datapos);
do_munmap(current->mm, textpos, text_len);
ret = realdatastart;
- goto err_close;
+ goto err;
}
datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
@@ -587,7 +577,7 @@
do_munmap(current->mm, textpos, text_len);
do_munmap(current->mm, realdatastart, data_len + extra);
ret = result;
- goto err_close;
+ goto err;
}
reloc = (unsigned long *) (datapos+(ntohl(hdr->reloc_start)-text_len));
@@ -606,7 +596,7 @@
printk("Unable to allocate RAM for process text/data, errno %d\n",
(int)-textpos);
ret = textpos;
- goto err_close;
+ goto err;
}
realdatastart = textpos + ntohl(hdr->data_start);
@@ -652,7 +642,7 @@
do_munmap(current->mm, textpos, text_len + data_len + extra +
MAX_SHARED_LIBS * sizeof(unsigned long));
ret = result;
- goto err_close;
+ goto err;
}
}
@@ -717,7 +707,7 @@
addr = calc_reloc(*rp, libinfo, id, 0);
if (addr == RELOC_FAILED) {
ret = -ENOEXEC;
- goto err_close;
+ goto err;
}
*rp = addr;
}
@@ -747,7 +737,7 @@
rp = (unsigned long *) calc_reloc(addr, libinfo, id, 1);
if (rp == (unsigned long *)RELOC_FAILED) {
ret = -ENOEXEC;
- goto err_close;
+ goto err;
}
/* Get the pointer's value. */
@@ -762,7 +752,7 @@
addr = calc_reloc(addr, libinfo, id, 0);
if (addr == RELOC_FAILED) {
ret = -ENOEXEC;
- goto err_close;
+ goto err;
}
/* Write back the relocated pointer. */
@@ -783,8 +773,6 @@
stack_len);
return 0;
-err_close:
- sys_close(exec_fileno);
err:
return ret;
}
diff --git a/fs/bio.c b/fs/bio.c
index eb8fbc5..098c12b 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -1116,6 +1116,9 @@
bp->bio1.bi_io_vec = &bp->bv1;
bp->bio2.bi_io_vec = &bp->bv2;
+ bp->bio1.bi_max_vecs = 1;
+ bp->bio2.bi_max_vecs = 1;
+
bp->bio1.bi_end_io = bio_pair_end_1;
bp->bio2.bi_end_io = bio_pair_end_2;
diff --git a/fs/compat.c b/fs/compat.c
index 01f39f8..b1f6478 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -2030,109 +2030,115 @@
struct knfsd_fh cr32_getfs;
};
-static int compat_nfs_svc_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_svc_trans(struct nfsctl_arg *karg,
+ struct compat_nfsctl_arg __user *arg)
{
- int err;
-
- err = access_ok(VERIFY_READ, &arg->ca32_svc, sizeof(arg->ca32_svc));
- err |= get_user(karg->ca_version, &arg->ca32_version);
- err |= __get_user(karg->ca_svc.svc_port, &arg->ca32_svc.svc32_port);
- err |= __get_user(karg->ca_svc.svc_nthreads, &arg->ca32_svc.svc32_nthreads);
- return (err) ? -EFAULT : 0;
+ if (!access_ok(VERIFY_READ, &arg->ca32_svc, sizeof(arg->ca32_svc)) ||
+ get_user(karg->ca_version, &arg->ca32_version) ||
+ __get_user(karg->ca_svc.svc_port, &arg->ca32_svc.svc32_port) ||
+ __get_user(karg->ca_svc.svc_nthreads,
+ &arg->ca32_svc.svc32_nthreads))
+ return -EFAULT;
+ return 0;
}
-static int compat_nfs_clnt_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_clnt_trans(struct nfsctl_arg *karg,
+ struct compat_nfsctl_arg __user *arg)
{
- int err;
+ if (!access_ok(VERIFY_READ, &arg->ca32_client,
+ sizeof(arg->ca32_client)) ||
+ get_user(karg->ca_version, &arg->ca32_version) ||
+ __copy_from_user(&karg->ca_client.cl_ident[0],
+ &arg->ca32_client.cl32_ident[0],
+ NFSCLNT_IDMAX) ||
+ __get_user(karg->ca_client.cl_naddr,
+ &arg->ca32_client.cl32_naddr) ||
+ __copy_from_user(&karg->ca_client.cl_addrlist[0],
+ &arg->ca32_client.cl32_addrlist[0],
+ (sizeof(struct in_addr) * NFSCLNT_ADDRMAX)) ||
+ __get_user(karg->ca_client.cl_fhkeytype,
+ &arg->ca32_client.cl32_fhkeytype) ||
+ __get_user(karg->ca_client.cl_fhkeylen,
+ &arg->ca32_client.cl32_fhkeylen) ||
+ __copy_from_user(&karg->ca_client.cl_fhkey[0],
+ &arg->ca32_client.cl32_fhkey[0],
+ NFSCLNT_KEYMAX))
+ return -EFAULT;
- err = access_ok(VERIFY_READ, &arg->ca32_client, sizeof(arg->ca32_client));
- err |= get_user(karg->ca_version, &arg->ca32_version);
- err |= __copy_from_user(&karg->ca_client.cl_ident[0],
- &arg->ca32_client.cl32_ident[0],
- NFSCLNT_IDMAX);
- err |= __get_user(karg->ca_client.cl_naddr, &arg->ca32_client.cl32_naddr);
- err |= __copy_from_user(&karg->ca_client.cl_addrlist[0],
- &arg->ca32_client.cl32_addrlist[0],
- (sizeof(struct in_addr) * NFSCLNT_ADDRMAX));
- err |= __get_user(karg->ca_client.cl_fhkeytype,
- &arg->ca32_client.cl32_fhkeytype);
- err |= __get_user(karg->ca_client.cl_fhkeylen,
- &arg->ca32_client.cl32_fhkeylen);
- err |= __copy_from_user(&karg->ca_client.cl_fhkey[0],
- &arg->ca32_client.cl32_fhkey[0],
- NFSCLNT_KEYMAX);
-
- return (err) ? -EFAULT : 0;
+ return 0;
}
-static int compat_nfs_exp_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_exp_trans(struct nfsctl_arg *karg,
+ struct compat_nfsctl_arg __user *arg)
{
- int err;
-
- err = access_ok(VERIFY_READ, &arg->ca32_export, sizeof(arg->ca32_export));
- err |= get_user(karg->ca_version, &arg->ca32_version);
- err |= __copy_from_user(&karg->ca_export.ex_client[0],
- &arg->ca32_export.ex32_client[0],
- NFSCLNT_IDMAX);
- err |= __copy_from_user(&karg->ca_export.ex_path[0],
- &arg->ca32_export.ex32_path[0],
- NFS_MAXPATHLEN);
- err |= __get_user(karg->ca_export.ex_dev,
- &arg->ca32_export.ex32_dev);
- err |= __get_user(karg->ca_export.ex_ino,
- &arg->ca32_export.ex32_ino);
- err |= __get_user(karg->ca_export.ex_flags,
- &arg->ca32_export.ex32_flags);
- err |= __get_user(karg->ca_export.ex_anon_uid,
- &arg->ca32_export.ex32_anon_uid);
- err |= __get_user(karg->ca_export.ex_anon_gid,
- &arg->ca32_export.ex32_anon_gid);
+ if (!access_ok(VERIFY_READ, &arg->ca32_export,
+ sizeof(arg->ca32_export)) ||
+ get_user(karg->ca_version, &arg->ca32_version) ||
+ __copy_from_user(&karg->ca_export.ex_client[0],
+ &arg->ca32_export.ex32_client[0],
+ NFSCLNT_IDMAX) ||
+ __copy_from_user(&karg->ca_export.ex_path[0],
+ &arg->ca32_export.ex32_path[0],
+ NFS_MAXPATHLEN) ||
+ __get_user(karg->ca_export.ex_dev,
+ &arg->ca32_export.ex32_dev) ||
+ __get_user(karg->ca_export.ex_ino,
+ &arg->ca32_export.ex32_ino) ||
+ __get_user(karg->ca_export.ex_flags,
+ &arg->ca32_export.ex32_flags) ||
+ __get_user(karg->ca_export.ex_anon_uid,
+ &arg->ca32_export.ex32_anon_uid) ||
+ __get_user(karg->ca_export.ex_anon_gid,
+ &arg->ca32_export.ex32_anon_gid))
+ return -EFAULT;
SET_UID(karg->ca_export.ex_anon_uid, karg->ca_export.ex_anon_uid);
SET_GID(karg->ca_export.ex_anon_gid, karg->ca_export.ex_anon_gid);
- return (err) ? -EFAULT : 0;
+ return 0;
}
-static int compat_nfs_getfd_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_getfd_trans(struct nfsctl_arg *karg,
+ struct compat_nfsctl_arg __user *arg)
{
- int err;
+ if (!access_ok(VERIFY_READ, &arg->ca32_getfd,
+ sizeof(arg->ca32_getfd)) ||
+ get_user(karg->ca_version, &arg->ca32_version) ||
+ __copy_from_user(&karg->ca_getfd.gd_addr,
+ &arg->ca32_getfd.gd32_addr,
+ (sizeof(struct sockaddr))) ||
+ __copy_from_user(&karg->ca_getfd.gd_path,
+ &arg->ca32_getfd.gd32_path,
+ (NFS_MAXPATHLEN+1)) ||
+ __get_user(karg->ca_getfd.gd_version,
+ &arg->ca32_getfd.gd32_version))
+ return -EFAULT;
- err = access_ok(VERIFY_READ, &arg->ca32_getfd, sizeof(arg->ca32_getfd));
- err |= get_user(karg->ca_version, &arg->ca32_version);
- err |= __copy_from_user(&karg->ca_getfd.gd_addr,
- &arg->ca32_getfd.gd32_addr,
- (sizeof(struct sockaddr)));
- err |= __copy_from_user(&karg->ca_getfd.gd_path,
- &arg->ca32_getfd.gd32_path,
- (NFS_MAXPATHLEN+1));
- err |= __get_user(karg->ca_getfd.gd_version,
- &arg->ca32_getfd.gd32_version);
-
- return (err) ? -EFAULT : 0;
+ return 0;
}
-static int compat_nfs_getfs_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_getfs_trans(struct nfsctl_arg *karg,
+ struct compat_nfsctl_arg __user *arg)
{
- int err;
+ if (!access_ok(VERIFY_READ,&arg->ca32_getfs,sizeof(arg->ca32_getfs)) ||
+ get_user(karg->ca_version, &arg->ca32_version) ||
+ __copy_from_user(&karg->ca_getfs.gd_addr,
+ &arg->ca32_getfs.gd32_addr,
+ (sizeof(struct sockaddr))) ||
+ __copy_from_user(&karg->ca_getfs.gd_path,
+ &arg->ca32_getfs.gd32_path,
+ (NFS_MAXPATHLEN+1)) ||
+ __get_user(karg->ca_getfs.gd_maxlen,
+ &arg->ca32_getfs.gd32_maxlen))
+ return -EFAULT;
- err = access_ok(VERIFY_READ, &arg->ca32_getfs, sizeof(arg->ca32_getfs));
- err |= get_user(karg->ca_version, &arg->ca32_version);
- err |= __copy_from_user(&karg->ca_getfs.gd_addr,
- &arg->ca32_getfs.gd32_addr,
- (sizeof(struct sockaddr)));
- err |= __copy_from_user(&karg->ca_getfs.gd_path,
- &arg->ca32_getfs.gd32_path,
- (NFS_MAXPATHLEN+1));
- err |= __get_user(karg->ca_getfs.gd_maxlen,
- &arg->ca32_getfs.gd32_maxlen);
-
- return (err) ? -EFAULT : 0;
+ return 0;
}
/* This really doesn't need translations, we are only passing
* back a union which contains opaque nfs file handle data.
*/
-static int compat_nfs_getfh_res_trans(union nfsctl_res *kres, union compat_nfsctl_res __user *res)
+static int compat_nfs_getfh_res_trans(union nfsctl_res *kres,
+ union compat_nfsctl_res __user *res)
{
int err;
@@ -2141,8 +2147,9 @@
return (err) ? -EFAULT : 0;
}
-asmlinkage long compat_sys_nfsservctl(int cmd, struct compat_nfsctl_arg __user *arg,
- union compat_nfsctl_res __user *res)
+asmlinkage long compat_sys_nfsservctl(int cmd,
+ struct compat_nfsctl_arg __user *arg,
+ union compat_nfsctl_res __user *res)
{
struct nfsctl_arg *karg;
union nfsctl_res *kres;
diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index b06b54f..4c39009 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -102,7 +102,7 @@
if (acceptable(context, result))
return result;
if (S_ISDIR(result->d_inode->i_mode)) {
- /* there is no other dentry, so fail */
+ err = -EACCES;
goto err_result;
}
diff --git a/fs/inotify.c b/fs/inotify.c
index 1f50302..732ec4b 100644
--- a/fs/inotify.c
+++ b/fs/inotify.c
@@ -848,7 +848,11 @@
inode = watch->inode;
mutex_lock(&inode->inotify_mutex);
mutex_lock(&dev->mutex);
- remove_watch_no_event(watch, dev);
+
+ /* make sure we didn't race with another list removal */
+ if (likely(idr_find(&dev->idr, watch->wd)))
+ remove_watch_no_event(watch, dev);
+
mutex_unlock(&dev->mutex);
mutex_unlock(&inode->inotify_mutex);
put_inotify_watch(watch);
@@ -890,8 +894,7 @@
mutex_lock(&dev->mutex);
/* make sure that we did not race */
- watch = idr_find(&dev->idr, wd);
- if (likely(watch))
+ if (likely(idr_find(&dev->idr, wd) == watch))
remove_watch(watch, dev);
mutex_unlock(&dev->mutex);
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index 4e05781..3eec300 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -1066,9 +1066,11 @@
rv = nfserr_perm;
else if (IS_ERR(exp))
rv = nfserrno(PTR_ERR(exp));
- else
+ else {
rv = fh_compose(fhp, exp,
fsid_key->ek_dentry, NULL);
+ exp_put(exp);
+ }
cache_put(&fsid_key->h, &svc_expkey_cache);
return rv;
}
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 6aa92d0..1d65f13 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1922,11 +1922,10 @@
value = kmalloc(size, GFP_KERNEL);
if (!value)
return -ENOMEM;
- size = posix_acl_to_xattr(acl, value, size);
- if (size < 0) {
- error = size;
+ error = posix_acl_to_xattr(acl, value, size);
+ if (error < 0)
goto getout;
- }
+ size = error;
} else
size = 0;
diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h
index 1e70908..915590c3 100644
--- a/include/asm-arm/arch-pxa/pxa2xx_spi.h
+++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h
@@ -27,13 +27,16 @@
#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00)
#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP_TIMEOUT_SCALE (2712)
#elif defined(CONFIG_PXA27x)
#define CLOCK_SPEED_HZ 13000000
#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP_TIMEOUT_SCALE (769)
#endif
+#define SSP_TIMEOUT(x) ((x*10000)/SSP_TIMEOUT_SCALE)
#define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1)))))
#define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2)))))
#define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3)))))
diff --git a/include/asm-arm/arch-s3c2410/spi-gpio.h b/include/asm-arm/arch-s3c2410/spi-gpio.h
new file mode 100644
index 0000000..258c00b
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/spi-gpio.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/arch-s3c2410/spi.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPIGPIO_H
+#define __ASM_ARCH_SPIGPIO_H __FILE__
+
+struct s3c2410_spigpio_info;
+struct spi_board_info;
+
+struct s3c2410_spigpio_info {
+ unsigned long pin_clk;
+ unsigned long pin_mosi;
+ unsigned long pin_miso;
+
+ unsigned long board_size;
+ struct spi_board_info *board_info;
+
+ void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
+};
+
+
+#endif /* __ASM_ARCH_SPIGPIO_H */
diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h
new file mode 100644
index 0000000..4029a1a
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/spi.h
@@ -0,0 +1,29 @@
+/* linux/include/asm-arm/arch-s3c2410/spi.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_H
+#define __ASM_ARCH_SPI_H __FILE__
+
+struct s3c2410_spi_info;
+struct spi_board_info;
+
+struct s3c2410_spi_info {
+ unsigned long pin_cs; /* simple gpio cs */
+
+ unsigned long board_size;
+ struct spi_board_info *board_info;
+
+ void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
+};
+
+
+#endif /* __ASM_ARCH_SPI_H */
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
index 908acb4..edde246 100644
--- a/include/asm-powerpc/unistd.h
+++ b/include/asm-powerpc/unistd.h
@@ -321,8 +321,10 @@
#define __NR_readlinkat 296
#define __NR_fchmodat 297
#define __NR_faccessat 298
+#define __NR_get_robust_list 299
+#define __NR_set_robust_list 300
-#define __NR_syscalls 299
+#define __NR_syscalls 301
#ifdef __KERNEL__
#define __NR__exit __NR_exit
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
index f5611a7..45a5765 100644
--- a/include/asm-sparc/unistd.h
+++ b/include/asm-sparc/unistd.h
@@ -316,11 +316,13 @@
#define __NR_pselect6 297
#define __NR_ppoll 298
#define __NR_unshare 299
+#define __NR_set_robust_list 300
+#define __NR_get_robust_list 301
-/* WARNING: You MAY NOT add syscall numbers larger than 299, since
+/* WARNING: You MAY NOT add syscall numbers larger than 301, since
* all of the syscall tables in the Sparc kernel are
- * sized to have 299 entries (starting at zero). Therefore
- * find a free slot in the 0-299 range.
+ * sized to have 301 entries (starting at zero). Therefore
+ * find a free slot in the 0-301 range.
*/
#define _syscall0(type,name) \
diff --git a/include/asm-sparc64/dma-mapping.h b/include/asm-sparc64/dma-mapping.h
index c7d5804..a8d39f2 100644
--- a/include/asm-sparc64/dma-mapping.h
+++ b/include/asm-sparc64/dma-mapping.h
@@ -4,7 +4,146 @@
#include <linux/config.h>
#ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
+
+/* we implement the API below in terms of the existing PCI one,
+ * so include it */
+#include <linux/pci.h>
+/* need struct page definitions */
+#include <linux/mm.h>
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ return pci_dma_supported(to_pci_dev(dev), mask);
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 dma_mask)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
+}
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+ gfp_t flag)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ return pci_iommu_ops->alloc_consistent(to_pci_dev(dev), size, dma_handle, flag);
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+ dma_addr_t dma_handle)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_free_consistent(to_pci_dev(dev), size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ return pci_map_single(to_pci_dev(dev), cpu_addr, size, (int)direction);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_unmap_single(to_pci_dev(dev), dma_addr, size, (int)direction);
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ return pci_map_page(to_pci_dev(dev), page, offset, size, (int)direction);
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_unmap_page(to_pci_dev(dev), dma_address, size, (int)direction);
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_unmap_sg(to_pci_dev(dev), sg, nhwentries, (int)direction);
+}
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
+ size, (int)direction);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
+ size, (int)direction);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg, nelems, (int)direction);
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_dma_sync_sg_for_device(to_pci_dev(dev), sg, nelems, (int)direction);
+}
+
+static inline int
+dma_mapping_error(dma_addr_t dma_addr)
+{
+ return pci_dma_mapping_error(dma_addr);
+}
+
#else
struct device;
diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h
index 7c5a589..e1ea67b 100644
--- a/include/asm-sparc64/pci.h
+++ b/include/asm-sparc64/pci.h
@@ -42,7 +42,7 @@
struct pci_dev;
struct pci_iommu_ops {
- void *(*alloc_consistent)(struct pci_dev *, size_t, dma_addr_t *);
+ void *(*alloc_consistent)(struct pci_dev *, size_t, dma_addr_t *, gfp_t);
void (*free_consistent)(struct pci_dev *, size_t, void *, dma_addr_t);
dma_addr_t (*map_single)(struct pci_dev *, void *, size_t, int);
void (*unmap_single)(struct pci_dev *, dma_addr_t, size_t, int);
@@ -59,7 +59,7 @@
*/
static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle)
{
- return pci_iommu_ops->alloc_consistent(hwdev, size, dma_handle);
+ return pci_iommu_ops->alloc_consistent(hwdev, size, dma_handle, GFP_ATOMIC);
}
/* Free and unmap a consistent DMA buffer.
diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h
index 6870574..998ef4a 100644
--- a/include/asm-sparc64/unistd.h
+++ b/include/asm-sparc64/unistd.h
@@ -318,11 +318,13 @@
#define __NR_pselect6 297
#define __NR_ppoll 298
#define __NR_unshare 299
+#define __NR_set_robust_list 300
+#define __NR_get_robust_list 301
-/* WARNING: You MAY NOT add syscall numbers larger than 299, since
+/* WARNING: You MAY NOT add syscall numbers larger than 301, since
* all of the syscall tables in the Sparc kernel are
- * sized to have 299 entries (starting at zero). Therefore
- * find a free slot in the 0-299 range.
+ * sized to have 301 entries (starting at zero). Therefore
+ * find a free slot in the 0-301 range.
*/
#define _syscall0(type,name) \
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 2d71608..33d8f20 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -19,5 +19,4 @@
void (*cont)(const struct firmware *fw, void *context));
void release_firmware(const struct firmware *fw);
-void register_firmware(const char *name, const u8 *data, size_t size);
#endif
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 3de2bfb..f813bc8 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -213,6 +213,10 @@
#define FIBMAP _IO(0x00,1) /* bmap access */
#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */
+#define SYNC_FILE_RANGE_WAIT_BEFORE 1
+#define SYNC_FILE_RANGE_WRITE 2
+#define SYNC_FILE_RANGE_WAIT_AFTER 4
+
#ifdef __KERNEL__
#include <linux/linkage.h>
@@ -758,9 +762,6 @@
extern int fcntl_getlease(struct file *filp);
/* fs/sync.c */
-#define SYNC_FILE_RANGE_WAIT_BEFORE 1
-#define SYNC_FILE_RANGE_WRITE 2
-#define SYNC_FILE_RANGE_WAIT_AFTER 4
extern int do_sync_file_range(struct file *file, loff_t offset, loff_t endbyte,
unsigned int flags);
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index a3a0e07..16fbe59 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -110,5 +110,16 @@
#define FSL_USB2_PORT0_ENABLED 0x00000001
#define FSL_USB2_PORT1_ENABLED 0x00000002
+struct fsl_spi_platform_data {
+ u32 initial_spmode; /* initial SPMODE value */
+ u16 bus_num;
+
+ /* board specific information */
+ u16 max_chipselect;
+ void (*activate_cs)(u8 cs, u8 polarity);
+ void (*deactivate_cs)(u8 cs, u8 polarity);
+ u32 sysclk;
+};
+
#endif /* _FSL_DEVICE_H_ */
#endif /* __KERNEL__ */
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index b5c2112..3674035 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -22,6 +22,7 @@
#else
#define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER
#endif
+#define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))
struct free_area {
struct list_head free_list;
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 3996960..60d49e5 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -52,6 +52,7 @@
struct mq_attr;
struct compat_stat;
struct compat_timeval;
+struct robust_list_head;
#include <linux/config.h>
#include <linux/types.h>
@@ -581,5 +582,10 @@
asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
unsigned int flags);
+asmlinkage long sys_get_robust_list(int pid,
+ struct robust_list_head __user **head_ptr,
+ size_t __user *len_ptr);
+asmlinkage long sys_set_robust_list(struct robust_list_head __user *head,
+ size_t len);
#endif
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index d7670ec..ad7fa9c 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -1141,8 +1141,13 @@
/* Compatibility layer interface -- v4l1-compat module */
typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
unsigned int cmd, void *arg);
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
int cmd, void *arg, v4l2_kioctl driver_ioctl);
+#else
+#define v4l_compat_translate_ioctl(inode,file,cmd,arg,ioctl) -EINVAL
+#endif
/* 32 Bits compatibility layer for 64 bits processors */
extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd,
diff --git a/include/net/irda/irlmp.h b/include/net/irda/irlmp.h
index 86aefb1..c0c895d 100644
--- a/include/net/irda/irlmp.h
+++ b/include/net/irda/irlmp.h
@@ -112,7 +112,7 @@
struct timer_list watchdog_timer;
- IRLMP_STATE lsap_state; /* Connection state */
+ LSAP_STATE lsap_state; /* Connection state */
notify_t notify; /* Indication/Confirm entry points */
struct qos_info qos; /* QoS for this connection */
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 72248d1..ab81fdd 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2231,19 +2231,25 @@
* So only GFP_KERNEL allocations, if all nodes in the cpuset are
* short of memory, might require taking the callback_mutex mutex.
*
- * The first loop over the zonelist in mm/page_alloc.c:__alloc_pages()
- * calls here with __GFP_HARDWALL always set in gfp_mask, enforcing
- * hardwall cpusets - no allocation on a node outside the cpuset is
- * allowed (unless in interrupt, of course).
+ * The first call here from mm/page_alloc:get_page_from_freelist()
+ * has __GFP_HARDWALL set in gfp_mask, enforcing hardwall cpusets, so
+ * no allocation on a node outside the cpuset is allowed (unless in
+ * interrupt, of course).
*
- * The second loop doesn't even call here for GFP_ATOMIC requests
- * (if the __alloc_pages() local variable 'wait' is set). That check
- * and the checks below have the combined affect in the second loop of
- * the __alloc_pages() routine that:
+ * The second pass through get_page_from_freelist() doesn't even call
+ * here for GFP_ATOMIC calls. For those calls, the __alloc_pages()
+ * variable 'wait' is not set, and the bit ALLOC_CPUSET is not set
+ * in alloc_flags. That logic and the checks below have the combined
+ * affect that:
* in_interrupt - any node ok (current task context irrelevant)
* GFP_ATOMIC - any node ok
* GFP_KERNEL - any node in enclosing mem_exclusive cpuset ok
* GFP_USER - only nodes in current tasks mems allowed ok.
+ *
+ * Rule:
+ * Don't call cpuset_zone_allowed() if you can't sleep, unless you
+ * pass in the __GFP_HARDWALL flag set in gfp_flag, which disables
+ * the code that might scan up ancestor cpusets and sleep.
**/
int __cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask)
@@ -2255,6 +2261,7 @@
if (in_interrupt())
return 1;
node = z->zone_pgdat->node_id;
+ might_sleep_if(!(gfp_mask & __GFP_HARDWALL));
if (node_isset(node, current->mems_allowed))
return 1;
if (gfp_mask & __GFP_HARDWALL) /* If hardwall request, stop here */
diff --git a/kernel/sched.c b/kernel/sched.c
index 4c64f85..c13f1bd 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -665,55 +665,13 @@
}
/*
- * We place interactive tasks back into the active array, if possible.
- *
- * To guarantee that this does not starve expired tasks we ignore the
- * interactivity of a task if the first expired task had to wait more
- * than a 'reasonable' amount of time. This deadline timeout is
- * load-dependent, as the frequency of array switched decreases with
- * increasing number of running tasks. We also ignore the interactivity
- * if a better static_prio task has expired, and switch periodically
- * regardless, to ensure that highly interactive tasks do not starve
- * the less fortunate for unreasonably long periods.
- */
-static inline int expired_starving(runqueue_t *rq)
-{
- int limit;
-
- /*
- * Arrays were recently switched, all is well
- */
- if (!rq->expired_timestamp)
- return 0;
-
- limit = STARVATION_LIMIT * rq->nr_running;
-
- /*
- * It's time to switch arrays
- */
- if (jiffies - rq->expired_timestamp >= limit)
- return 1;
-
- /*
- * There's a better selection in the expired array
- */
- if (rq->curr->static_prio > rq->best_expired_prio)
- return 1;
-
- /*
- * All is well
- */
- return 0;
-}
-
-/*
* __activate_task - move a task to the runqueue.
*/
static void __activate_task(task_t *p, runqueue_t *rq)
{
prio_array_t *target = rq->active;
- if (unlikely(batch_task(p) || (expired_starving(rq) && !rt_task(p))))
+ if (batch_task(p))
target = rq->expired;
enqueue_task(p, target);
rq->nr_running++;
@@ -2532,6 +2490,22 @@
}
/*
+ * We place interactive tasks back into the active array, if possible.
+ *
+ * To guarantee that this does not starve expired tasks we ignore the
+ * interactivity of a task if the first expired task had to wait more
+ * than a 'reasonable' amount of time. This deadline timeout is
+ * load-dependent, as the frequency of array switched decreases with
+ * increasing number of running tasks. We also ignore the interactivity
+ * if a better static_prio task has expired:
+ */
+#define EXPIRED_STARVING(rq) \
+ ((STARVATION_LIMIT && ((rq)->expired_timestamp && \
+ (jiffies - (rq)->expired_timestamp >= \
+ STARVATION_LIMIT * ((rq)->nr_running) + 1))) || \
+ ((rq)->curr->static_prio > (rq)->best_expired_prio))
+
+/*
* Account user cpu time to a process.
* @p: the process that the cpu time gets accounted to
* @hardirq_offset: the offset to subtract from hardirq_count()
@@ -2666,7 +2640,7 @@
if (!rq->expired_timestamp)
rq->expired_timestamp = jiffies;
- if (!TASK_INTERACTIVE(p) || expired_starving(rq)) {
+ if (!TASK_INTERACTIVE(p) || EXPIRED_STARVING(rq)) {
enqueue_task(p, rq->expired);
if (p->static_prio < rq->best_expired_prio)
rq->best_expired_prio = p->static_prio;
diff --git a/kernel/timer.c b/kernel/timer.c
index 67eaf0f..9e49dee 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -541,6 +541,22 @@
}
spin_unlock(&base->lock);
+ /*
+ * It can happen that other CPUs service timer IRQs and increment
+ * jiffies, but we have not yet got a local timer tick to process
+ * the timer wheels. In that case, the expiry time can be before
+ * jiffies, but since the high-resolution timer here is relative to
+ * jiffies, the default expression when high-resolution timers are
+ * not active,
+ *
+ * time_before(MAX_JIFFY_OFFSET + jiffies, expires)
+ *
+ * would falsely evaluate to true. If that is the case, just
+ * return jiffies so that we can immediately fire the local timer
+ */
+ if (time_before(expires, jiffies))
+ return jiffies;
+
if (time_before(hr_expires, expires))
return hr_expires;
diff --git a/lib/kobject.c b/lib/kobject.c
index b46350c..687ab41 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -198,14 +198,14 @@
/* be noisy on error issues */
if (error == -EEXIST)
- printk("kobject_add failed for %s with -EEXIST, "
+ pr_debug("kobject_add failed for %s with -EEXIST, "
"don't try to register things with the "
"same name in the same directory.\n",
kobject_name(kobj));
else
- printk("kobject_add failed for %s (%d)\n",
+ pr_debug("kobject_add failed for %s (%d)\n",
kobject_name(kobj), error);
- dump_stack();
+ /* dump_stack(); */
}
return error;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 813b4ec..253a450 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -951,7 +951,7 @@
goto got_pg;
do {
- if (cpuset_zone_allowed(*z, gfp_mask))
+ if (cpuset_zone_allowed(*z, gfp_mask|__GFP_HARDWALL))
wakeup_kswapd(*z, order);
} while (*(++z));
@@ -970,7 +970,8 @@
alloc_flags |= ALLOC_HARDER;
if (gfp_mask & __GFP_HIGH)
alloc_flags |= ALLOC_HIGH;
- alloc_flags |= ALLOC_CPUSET;
+ if (wait)
+ alloc_flags |= ALLOC_CPUSET;
/*
* Go through the zonelist again. Let __GFP_HIGH and allocations
@@ -2124,14 +2125,22 @@
#ifdef CONFIG_FLAT_NODE_MEM_MAP
/* ia64 gets its own node_mem_map, before this, without bootmem */
if (!pgdat->node_mem_map) {
- unsigned long size;
+ unsigned long size, start, end;
struct page *map;
- size = (pgdat->node_spanned_pages + 1) * sizeof(struct page);
+ /*
+ * The zone's endpoints aren't required to be MAX_ORDER
+ * aligned but the node_mem_map endpoints must be in order
+ * for the buddy allocator to function correctly.
+ */
+ start = pgdat->node_start_pfn & ~(MAX_ORDER_NR_PAGES - 1);
+ end = pgdat->node_start_pfn + pgdat->node_spanned_pages;
+ end = ALIGN(end, MAX_ORDER_NR_PAGES);
+ size = (end - start) * sizeof(struct page);
map = alloc_remap(pgdat->node_id, size);
if (!map)
map = alloc_bootmem_node(pgdat, size);
- pgdat->node_mem_map = map;
+ pgdat->node_mem_map = map + (pgdat->node_start_pfn - start);
}
#ifdef CONFIG_FLATMEM
/*
diff --git a/mm/sparse.c b/mm/sparse.c
index c5e89eb..100040c 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -87,11 +87,8 @@
unsigned long root_nr;
struct mem_section* root;
- for (root_nr = 0;
- root_nr < NR_MEM_SECTIONS;
- root_nr += SECTIONS_PER_ROOT) {
- root = __nr_to_section(root_nr);
-
+ for (root_nr = 0; root_nr < NR_SECTION_ROOTS; root_nr++) {
+ root = __nr_to_section(root_nr * SECTIONS_PER_ROOT);
if (!root)
continue;
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 22d806c..12da21a 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -55,7 +55,7 @@
static void __exit br_deinit(void)
{
- llc_sap_close(br_stp_sap);
+ rcu_assign_pointer(br_stp_sap->rcv_func, NULL);
#ifdef CONFIG_BRIDGE_NETFILTER
br_netfilter_fini();
@@ -67,6 +67,7 @@
synchronize_net();
+ llc_sap_put(br_stp_sap);
br_fdb_get_hook = NULL;
br_fdb_put_hook = NULL;
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index cd810f41..95278b2 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -210,7 +210,7 @@
skb->h.icmph->code != ICMP_FRAG_NEEDED)
return;
- spi = ntohl(ntohs(ipch->cpi));
+ spi = htonl(ntohs(ipch->cpi));
x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr,
spi, IPPROTO_COMP, AF_INET);
if (!x)
diff --git a/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c b/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
index 355a53a..26dfeca 100644
--- a/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
+++ b/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
@@ -528,14 +528,15 @@
/* Decode */
if ((err = (Decoders[son->type]) (bs, son, base,
- level + 1)) >
- H323_ERROR_STOP)
+ level + 1)) <
+ H323_ERROR_NONE)
return err;
bs->cur = beg + len;
bs->bit = 0;
} else if ((err = (Decoders[son->type]) (bs, son, base,
- level + 1)))
+ level + 1)) <
+ H323_ERROR_NONE)
return err;
}
@@ -554,7 +555,7 @@
/* Decode the extension components */
for (opt = 0; opt < bmp2_len; opt++, i++, son++) {
- if (son->attr & STOP) {
+ if (i < f->ub && son->attr & STOP) {
PRINT("%*.s%s\n", (level + 1) * TAB_SIZE, " ",
son->name);
return H323_ERROR_STOP;
@@ -584,8 +585,8 @@
beg = bs->cur;
if ((err = (Decoders[son->type]) (bs, son, base,
- level + 1)) >
- H323_ERROR_STOP)
+ level + 1)) <
+ H323_ERROR_NONE)
return err;
bs->cur = beg + len;
@@ -660,18 +661,20 @@
i <
effective_count ?
base : NULL,
- level + 1)) >
- H323_ERROR_STOP)
+ level + 1)) <
+ H323_ERROR_NONE)
return err;
bs->cur = beg + len;
bs->bit = 0;
} else
- if ((err = (Decoders[son->type]) (bs, son,
- i < effective_count ?
- base : NULL,
- level + 1)))
- return err;
+ if ((err = (Decoders[son->type]) (bs, son,
+ i <
+ effective_count ?
+ base : NULL,
+ level + 1)) <
+ H323_ERROR_NONE)
+ return err;
if (base)
base += son->offset;
@@ -735,13 +738,14 @@
}
beg = bs->cur;
- if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) >
- H323_ERROR_STOP)
+ if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) <
+ H323_ERROR_NONE)
return err;
bs->cur = beg + len;
bs->bit = 0;
- } else if ((err = (Decoders[son->type]) (bs, son, base, level + 1)))
+ } else if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) <
+ H323_ERROR_NONE)
return err;
return H323_ERROR_NONE;
diff --git a/net/ipv4/netfilter/ip_nat_snmp_basic.c b/net/ipv4/netfilter/ip_nat_snmp_basic.c
index c622538..c332442 100644
--- a/net/ipv4/netfilter/ip_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/ip_nat_snmp_basic.c
@@ -768,6 +768,7 @@
len *= sizeof(unsigned long);
*obj = kmalloc(sizeof(struct snmp_object) + len, GFP_ATOMIC);
if (*obj == NULL) {
+ kfree(lp);
kfree(id);
if (net_ratelimit())
printk("OOM in bsalg (%d)\n", __LINE__);
@@ -1003,12 +1004,12 @@
return 1;
+err_addr_free:
+ kfree((unsigned long *)trap->ip_address);
+
err_id_free:
kfree(trap->id);
-err_addr_free:
- kfree((unsigned long *)trap->ip_address);
-
return 0;
}
@@ -1126,11 +1127,10 @@
struct snmp_v1_trap trap;
unsigned char ret = snmp_trap_decode(&ctx, &trap, map, check);
- /* Discard trap allocations regardless */
- kfree(trap.id);
- kfree((unsigned long *)trap.ip_address);
-
- if (!ret)
+ if (ret) {
+ kfree(trap.id);
+ kfree((unsigned long *)trap.ip_address);
+ } else
return ret;
} else {
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index f285bbf..8604c74 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -221,7 +221,7 @@
if (pskb_may_pull(skb, xprth + 4 - skb->data)) {
u16 *ipcomp_hdr = (u16 *)xprth;
- fl->fl_ipsec_spi = ntohl(ntohs(ipcomp_hdr[1]));
+ fl->fl_ipsec_spi = htonl(ntohs(ipcomp_hdr[1]));
}
break;
default:
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 05eb67d..4863643 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -208,7 +208,7 @@
if (type != ICMPV6_DEST_UNREACH && type != ICMPV6_PKT_TOOBIG)
return;
- spi = ntohl(ntohs(ipcomph->cpi));
+ spi = htonl(ntohs(ipcomph->cpi));
x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, spi, IPPROTO_COMP, AF_INET6);
if (!x)
return;
diff --git a/net/irda/iriap.c b/net/irda/iriap.c
index 254f907..2d2e2b1 100644
--- a/net/irda/iriap.c
+++ b/net/irda/iriap.c
@@ -544,7 +544,8 @@
{
struct sk_buff *tx_skb;
int n;
- __u32 tmp_be32, tmp_be16;
+ __u32 tmp_be32;
+ __be16 tmp_be16;
__u8 *fp;
IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index 3ac4193..7026b08 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -159,6 +159,7 @@
detail->update(tmp, new);
tmp->next = *head;
*head = tmp;
+ detail->entries++;
cache_get(tmp);
is_new = cache_fresh_locked(tmp, new->expiry_time);
cache_fresh_locked(old, 0);
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index b549710..891a609 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -62,7 +62,7 @@
case IPPROTO_COMP:
if (!pskb_may_pull(skb, sizeof(struct ip_comp_hdr)))
return -EINVAL;
- *spi = ntohl(ntohs(*(u16*)(skb->h.raw + 2)));
+ *spi = htonl(ntohs(*(u16*)(skb->h.raw + 2)));
*seq = 0;
return 0;
default:
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 6d04504..d0f86ed 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -697,29 +697,79 @@
/* Walk through all sections */
for (i = 0; i < hdr->e_shnum; i++) {
- Elf_Rela *rela;
- Elf_Rela *start = (void *)hdr + sechdrs[i].sh_offset;
- Elf_Rela *stop = (void*)start + sechdrs[i].sh_size;
- const char *name = secstrings + sechdrs[i].sh_name +
- strlen(".rela");
+ const char *name = secstrings + sechdrs[i].sh_name;
+ const char *secname;
+ Elf_Rela r;
+ unsigned int r_sym;
/* We want to process only relocation sections and not .init */
- if (section_ref_ok(name) || (sechdrs[i].sh_type != SHT_RELA))
- continue;
-
- for (rela = start; rela < stop; rela++) {
- Elf_Rela r;
- const char *secname;
- r.r_offset = TO_NATIVE(rela->r_offset);
- r.r_info = TO_NATIVE(rela->r_info);
- r.r_addend = TO_NATIVE(rela->r_addend);
- sym = elf->symtab_start + ELF_R_SYM(r.r_info);
- /* Skip special sections */
- if (sym->st_shndx >= SHN_LORESERVE)
+ if (sechdrs[i].sh_type == SHT_RELA) {
+ Elf_Rela *rela;
+ Elf_Rela *start = (void *)hdr + sechdrs[i].sh_offset;
+ Elf_Rela *stop = (void*)start + sechdrs[i].sh_size;
+ name += strlen(".rela");
+ if (section_ref_ok(name))
continue;
- secname = secstrings + sechdrs[sym->st_shndx].sh_name;
- if (section(secname))
- warn_sec_mismatch(modname, name, elf, sym, r);
+ for (rela = start; rela < stop; rela++) {
+ r.r_offset = TO_NATIVE(rela->r_offset);
+#if KERNEL_ELFCLASS == ELFCLASS64
+ if (hdr->e_machine == EM_MIPS) {
+ r_sym = ELF64_MIPS_R_SYM(rela->r_info);
+ r_sym = TO_NATIVE(r_sym);
+ } else {
+ r.r_info = TO_NATIVE(rela->r_info);
+ r_sym = ELF_R_SYM(r.r_info);
+ }
+#else
+ r.r_info = TO_NATIVE(rela->r_info);
+ r_sym = ELF_R_SYM(r.r_info);
+#endif
+ r.r_addend = TO_NATIVE(rela->r_addend);
+ sym = elf->symtab_start + r_sym;
+ /* Skip special sections */
+ if (sym->st_shndx >= SHN_LORESERVE)
+ continue;
+
+ secname = secstrings +
+ sechdrs[sym->st_shndx].sh_name;
+ if (section(secname))
+ warn_sec_mismatch(modname, name,
+ elf, sym, r);
+ }
+ } else if (sechdrs[i].sh_type == SHT_REL) {
+ Elf_Rel *rel;
+ Elf_Rel *start = (void *)hdr + sechdrs[i].sh_offset;
+ Elf_Rel *stop = (void*)start + sechdrs[i].sh_size;
+ name += strlen(".rel");
+ if (section_ref_ok(name))
+ continue;
+
+ for (rel = start; rel < stop; rel++) {
+ r.r_offset = TO_NATIVE(rel->r_offset);
+#if KERNEL_ELFCLASS == ELFCLASS64
+ if (hdr->e_machine == EM_MIPS) {
+ r_sym = ELF64_MIPS_R_SYM(rel->r_info);
+ r_sym = TO_NATIVE(r_sym);
+ } else {
+ r.r_info = TO_NATIVE(rel->r_info);
+ r_sym = ELF_R_SYM(r.r_info);
+ }
+#else
+ r.r_info = TO_NATIVE(rel->r_info);
+ r_sym = ELF_R_SYM(r.r_info);
+#endif
+ r.r_addend = 0;
+ sym = elf->symtab_start + r_sym;
+ /* Skip special sections */
+ if (sym->st_shndx >= SHN_LORESERVE)
+ continue;
+
+ secname = secstrings +
+ sechdrs[sym->st_shndx].sh_name;
+ if (section(secname))
+ warn_sec_mismatch(modname, name,
+ elf, sym, r);
+ }
}
}
}
diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h
index b14255c..861d866 100644
--- a/scripts/mod/modpost.h
+++ b/scripts/mod/modpost.h
@@ -21,6 +21,7 @@
#define ELF_ST_BIND ELF32_ST_BIND
#define ELF_ST_TYPE ELF32_ST_TYPE
+#define Elf_Rel Elf32_Rel
#define Elf_Rela Elf32_Rela
#define ELF_R_SYM ELF32_R_SYM
#define ELF_R_TYPE ELF32_R_TYPE
@@ -34,11 +35,31 @@
#define ELF_ST_BIND ELF64_ST_BIND
#define ELF_ST_TYPE ELF64_ST_TYPE
+#define Elf_Rel Elf64_Rel
#define Elf_Rela Elf64_Rela
#define ELF_R_SYM ELF64_R_SYM
#define ELF_R_TYPE ELF64_R_TYPE
#endif
+/* The 64-bit MIPS ELF ABI uses an unusual reloc format. */
+typedef struct
+{
+ Elf32_Word r_sym; /* Symbol index */
+ unsigned char r_ssym; /* Special symbol for 2nd relocation */
+ unsigned char r_type3; /* 3rd relocation type */
+ unsigned char r_type2; /* 2nd relocation type */
+ unsigned char r_type1; /* 1st relocation type */
+} _Elf64_Mips_R_Info;
+
+typedef union
+{
+ Elf64_Xword r_info_number;
+ _Elf64_Mips_R_Info r_info_fields;
+} _Elf64_Mips_R_Info_union;
+
+#define ELF64_MIPS_R_SYM(i) \
+ ((__extension__ (_Elf64_Mips_R_Info_union)(i)).r_info_fields.r_sym)
+
#if KERNEL_ELFDATA != HOST_ELFDATA
static inline void __endian(const void *src, void *dest, unsigned int size)
@@ -48,8 +69,6 @@
((unsigned char*)dest)[i] = ((unsigned char*)src)[size - i-1];
}
-
-
#define TO_NATIVE(x) \
({ \
typeof(x) __x; \
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index d987048..21dad41 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -3231,7 +3231,7 @@
goto out;
/* Handle mapped IPv4 packets arriving via IPv6 sockets */
- if (family == PF_INET6 && skb->protocol == ntohs(ETH_P_IP))
+ if (family == PF_INET6 && skb->protocol == htons(ETH_P_IP))
family = PF_INET;
read_lock_bh(&sk->sk_callback_lock);
diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c
index da7ef26..77b0600 100644
--- a/sound/drivers/mpu401/mpu401.c
+++ b/sound/drivers/mpu401/mpu401.c
@@ -151,7 +151,7 @@
MODULE_DEVICE_TABLE(pnp, snd_mpu401_pnpids);
-static int __init snd_mpu401_pnp(int dev, struct pnp_dev *device,
+static int __devinit snd_mpu401_pnp(int dev, struct pnp_dev *device,
const struct pnp_device_id *id)
{
if (!pnp_port_valid(device, 0) ||
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index a36ec1d..e6945db 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -85,6 +85,8 @@
#include <linux/pnp.h>
#include <linux/isapnp.h>
#include <linux/moduleparam.h>
+#include <linux/delay.h>
+
#include <asm/io.h>
#include <asm/dma.h>
#include <sound/core.h>
diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c
index 49796be..e04fa49 100644
--- a/sound/oss/ad1848.c
+++ b/sound/oss/ad1848.c
@@ -2026,7 +2026,8 @@
if (irq > 0)
{
devc->dev_no = my_dev;
- if (request_irq(devc->irq, adintr, 0, devc->name, (void *)my_dev) < 0)
+ if (request_irq(devc->irq, adintr, 0, devc->name,
+ (void *)(long)my_dev) < 0)
{
printk(KERN_WARNING "ad1848: Unable to allocate IRQ\n");
/* Don't free it either then.. */
@@ -2175,7 +2176,7 @@
if (!share_dma)
{
if (devc->irq > 0) /* There is no point in freeing irq, if it wasn't allocated */
- free_irq(devc->irq, (void *)devc->dev_no);
+ free_irq(devc->irq, (void *)(long)devc->dev_no);
sound_free_dma(dma_playback);
@@ -2204,7 +2205,7 @@
unsigned char c930_stat = 0;
int cnt = 0;
- dev = (int)dev_id;
+ dev = (long)dev_id;
devc = (ad1848_info *) audio_devs[dev]->devc;
interrupt_again: /* Jump back here if int status doesn't reset */
@@ -2900,7 +2901,8 @@
return(dev);
}
-static struct pnp_dev *ad1848_init_generic(struct pnp_card *bus, struct address_info *hw_config, int slot)
+static struct pnp_dev __init *ad1848_init_generic(struct pnp_card *bus,
+ struct address_info *hw_config, int slot)
{
/* Configure Audio device */
diff --git a/sound/oss/nm256_audio.c b/sound/oss/nm256_audio.c
index 7de079b..6e662ac 100644
--- a/sound/oss/nm256_audio.c
+++ b/sound/oss/nm256_audio.c
@@ -960,7 +960,7 @@
/* Installs the AC97 mixer into CARD. */
-static int __init
+static int __devinit
nm256_install_mixer (struct nm256_info *card)
{
int mixer;
@@ -995,7 +995,7 @@
* RAM.
*/
-static void __init
+static void __devinit
nm256_peek_for_sig (struct nm256_info *card)
{
u32 port1offset
@@ -1056,7 +1056,7 @@
card->playing = 0;
card->recording = 0;
card->rev = rev;
- spin_lock_init(&card->lock);
+ spin_lock_init(&card->lock);
/* Init the memory port info. */
for (x = 0; x < 2; x++) {